diff -Nru linux-3.2.21/debian/changelog linux-3.2.21/debian/changelog --- linux-3.2.21/debian/changelog 2012-06-22 13:54:15.000000000 +0100 +++ linux-3.2.21/debian/changelog 2012-06-24 23:20:04.000000000 +0100 @@ -1,3 +1,19 @@ +linux (3.2.21-1+rpi1) wheezy; urgency=low + + * Add rpi flavour for armhf + * Add configuration for qemu flavor for armhf but leave it disabled as it. + doesn't seem to work. + * Disable all other flavours for armhf. + * remove features/all/rt/0072-hwlatdetect.patch.patch from the rt series + since it doesn't apply on top of our patch and we don't build any rt kernels + in raspbian anyway. + * remove debian patches to see if they are the cause of lockups + * remove 0248-sysrq-Allow-immediate-Magic-SysRq-output-for-PREEMPT.patch + from the rt series because it doesn't apply after other changes and we + don't build any rt kernels in raspbian anyway. + + -- Peter Michael Green Wed, 06 Jun 2012 23:00:20 +0000 + linux (3.2.21-1) unstable; urgency=low * New upstream stable update: diff -Nru linux-3.2.21/debian/config/armhf/config.qemu linux-3.2.21/debian/config/armhf/config.qemu --- linux-3.2.21/debian/config/armhf/config.qemu 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/config/armhf/config.qemu 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1,3037 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-qemu-armv6 +# Sat Mar 24 22:12:04 2012 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +# CONFIG_RESOURCE_COUNTERS is not set +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_INTEGRITY=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +CONFIG_ARCH_VERSATILE=y +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set + +# +# Versatile platform type +# +CONFIG_ARCH_VERSATILE_PB=y +CONFIG_MACH_VERSATILE_AB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +# CONFIG_CPU_ARM920T is not set +# CONFIG_CPU_ARM922T is not set +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_411920 is not set +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_ICST307=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +CONFIG_PCI_STUB=m +CONFIG_PCI_IOV=y +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y +# CONFIG_NETLABEL is not set +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m + +# +# DECnet: Netfilter Configuration +# +# CONFIG_DECNET_NF_GRABULATOR is not set +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set +CONFIG_TIPC=m +CONFIG_TIPC_ADVANCED=y +CONFIG_TIPC_ZONES=3 +CONFIG_TIPC_CLUSTERS=1 +CONFIG_TIPC_NODES=255 +CONFIG_TIPC_SLAVE_NODES=0 +CONFIG_TIPC_PORTS=8191 +CONFIG_TIPC_LOG=0 +# CONFIG_TIPC_DEBUG is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_DECNET=m +CONFIG_DECNET_ROUTER=y +CONFIG_LLC=y +CONFIG_LLC2=m +CONFIG_IPX=m +CONFIG_IPX_INTERN=y +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_PHONET=m +CONFIG_IEEE802154=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +CONFIG_NET_DROP_MONITOR=y +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_KVASER_PCI=m + +# +# CAN USB interfaces +# +CONFIG_CAN_EMS_USB=m +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +CONFIG_BT_MRVL=m +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +CONFIG_RXKAD=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set +CONFIG_LIB80211=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +CONFIG_NET_9P=m +CONFIG_NET_9P_RDMA=m +# CONFIG_NET_9P_DEBUG is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_DEVTMPFS=y +# CONFIG_DEVTMPFS_MOUNT is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +CONFIG_PARPORT=m +# CONFIG_PARPORT_PC is not set +# CONFIG_PARPORT_GSC is not set +CONFIG_PARPORT_AX88796=m +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +CONFIG_SGI_IOC4=m +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +# CONFIG_HP_ILO is not set +CONFIG_ISL29003=m +CONFIG_C2PORT=m + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_FC_TGT_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +CONFIG_SCSI_HPSA=m +# CONFIG_SCSI_3W_9XXX is not set +CONFIG_SCSI_3W_SAS=m +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_MVSAS=m +# CONFIG_SCSI_MVSAS_DEBUG is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +# CONFIG_SCSI_MPT2SAS_LOGGING is not set +# CONFIG_SCSI_HPTIOP is not set +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +CONFIG_FCOE=m +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_STEX=m +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_SCSI_PMCRAID=m +CONFIG_SCSI_PM8001=m +CONFIG_SCSI_SRP=m +CONFIG_SCSI_BFA_FC=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y +CONFIG_SATA_AHCI=m +CONFIG_SATA_SIL24=m +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +CONFIG_SATA_PROMISE=m +CONFIG_SATA_SX4=m +CONFIG_SATA_SIL=m +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +CONFIG_SATA_VIA=m +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +CONFIG_PATA_ATP867X=m +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +CONFIG_PATA_RDC=m +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_SCH=m +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +CONFIG_FUSION_SAS=m +CONFIG_FUSION_MAX_SGE=128 +CONFIG_FUSION_CTL=m +# CONFIG_FUSION_LOGGING is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +CONFIG_FIREWIRE=m +CONFIG_FIREWIRE_OHCI=m +CONFIG_FIREWIRE_OHCI_DEBUG=y +CONFIG_FIREWIRE_SBP2=m +CONFIG_FIREWIRE_NET=m +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_IFB=m +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=m +CONFIG_TYPHOON=m +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_ETHOC=m +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +CONFIG_DNET=m +# CONFIG_NET_TULIP is not set +CONFIG_HP100=m +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +CONFIG_AMD8111_ETH=m +CONFIG_ADAPTEC_STARFIRE=m +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +CONFIG_E100=m +CONFIG_FEALNX=m +CONFIG_NATSEMI=m +CONFIG_NE2K_PCI=m +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_TUNE_TWISTER=y +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_R6040=m +CONFIG_SIS900=m +CONFIG_EPIC100=m +CONFIG_SMSC9420=m +CONFIG_SUNDANCE=m +# CONFIG_SUNDANCE_MMIO is not set +# CONFIG_TLAN is not set +CONFIG_KS8842=m +CONFIG_KS8851_MLL=m +CONFIG_VIA_RHINE=m +# CONFIG_VIA_RHINE_MMIO is not set +CONFIG_SC92031=m +# CONFIG_NET_POCKET is not set +CONFIG_ATL2=m +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +CONFIG_DL2K=m +CONFIG_E1000=m +CONFIG_E1000E=m +# CONFIG_IP1000 is not set +CONFIG_IGB=m +CONFIG_IGBVF=m +CONFIG_NS83820=m +CONFIG_HAMACHI=m +CONFIG_YELLOWFIN=m +CONFIG_R8169=m +CONFIG_R8169_VLAN=y +CONFIG_SIS190=m +CONFIG_SKGE=m +# CONFIG_SKGE_DEBUG is not set +CONFIG_SKY2=m +# CONFIG_SKY2_DEBUG is not set +CONFIG_VIA_VELOCITY=m +# CONFIG_TIGON3 is not set +CONFIG_BNX2=m +CONFIG_CNIC=m +CONFIG_QLA3XXX=m +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_JME=m +# CONFIG_NETDEV_10000 is not set +CONFIG_MLX4_CORE=m +CONFIG_TR=y +CONFIG_IBMOL=m +CONFIG_IBMLS=m +CONFIG_3C359=m +CONFIG_TMS380TR=m +CONFIG_TMSPCI=m +CONFIG_ABYSS=m +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# WiMAX Wireless Broadband devices +# +CONFIG_WIMAX_I2400M=m + +# +# Enable MMC support to see WiMAX SDIO drivers +# +CONFIG_WIMAX_I2400M_USB=m +CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m +CONFIG_USB_IPHETH=m +# CONFIG_WAN is not set +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKEHARD=m +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_NET_FC is not set +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5588=m +CONFIG_KEYBOARD_ATKBD=y +CONFIG_QT2160=m +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_MAX7359=m +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_OPENCORES=m +CONFIG_KEYBOARD_STOWAWAY=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +CONFIG_MOUSE_APPLETOUCH=m +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +CONFIG_MOUSE_SYNAPTICS_I2C=m +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_USB_WACOM=m +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ATI_REMOTE=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_PCF50633_PMU=m +CONFIG_INPUT_WM831X_ON=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_AMBAKMI=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_NOZOMI=m + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_TIMERIOMEM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_TCG_TPM=m +CONFIG_TCG_NSC=m +CONFIG_TCG_ATMEL=m +CONFIG_DEVPORT=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +CONFIG_I2C_ISCH=m +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_OCORES=m +CONFIG_I2C_SIMTEC=m +# CONFIG_I2C_VERSATILE is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_TINY_USB=m + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_PCA_PLATFORM=m +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_DS1682=m +CONFIG_SENSORS_TSL2550=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +CONFIG_PPS=m +# CONFIG_PPS_DEBUG is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +CONFIG_W1_MASTER_MATROX=m +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +# CONFIG_W1_MASTER_DS1WM is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +# CONFIG_W1_SLAVE_DS2433_CRC is not set +CONFIG_W1_SLAVE_DS2760=m +CONFIG_W1_SLAVE_BQ27000=m +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +CONFIG_SENSORS_ADM1029=m +# CONFIG_SENSORS_ADM1031 is not set +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7473=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ATXP1=m +# CONFIG_SENSORS_DS1621 is not set +CONFIG_SENSORS_I5K_AMB=m +# CONFIG_SENSORS_F71805F is not set +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_G760A=m +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LM95241=m +# CONFIG_SENSORS_MAX1619 is not set +CONFIG_SENSORS_MAX6650=m +# CONFIG_SENSORS_PC87360 is not set +CONFIG_SENSORS_PC87427=m +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SIS5595 is not set +CONFIG_SENSORS_DME1737=m +# CONFIG_SENSORS_SMSC47M1 is not set +CONFIG_SENSORS_SMSC47M192=m +# CONFIG_SENSORS_SMSC47B397 is not set +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +# CONFIG_SENSORS_VIA686A is not set +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +# CONFIG_SENSORS_W83781D is not set +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +# CONFIG_SENSORS_W83L785TS is not set +CONFIG_SENSORS_W83L786NG=m +# CONFIG_SENSORS_W83627HF is not set +CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_WM831X=m +CONFIG_SENSORS_WM8350=m +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_WM831X_WATCHDOG=m +CONFIG_WM8350_WATCHDOG=m +# CONFIG_ALIM7101_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +# CONFIG_SSB_DRIVER_PCICORE is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=m +CONFIG_MFD_SM501=m +CONFIG_HTC_PASIC3=m +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +CONFIG_MFD_WM8400=m +CONFIG_MFD_WM831X=m +CONFIG_MFD_WM8350=m +CONFIG_MFD_WM8350_I2C=m +CONFIG_MFD_PCF50633=m +CONFIG_PCF50633_ADC=m +CONFIG_PCF50633_GPIO=m +CONFIG_AB3100_CORE=m +CONFIG_AB3100_OTP=m +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=m +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +CONFIG_REGULATOR_USERSPACE_CONSUMER=m +CONFIG_REGULATOR_BQ24022=m +CONFIG_REGULATOR_MAX1586=m +CONFIG_REGULATOR_WM831X=m +CONFIG_REGULATOR_WM8350=m +CONFIG_REGULATOR_WM8400=m +CONFIG_REGULATOR_PCF50633=m +CONFIG_REGULATOR_LP3971=m +CONFIG_REGULATOR_AB3100=m +CONFIG_REGULATOR_TPS65023=m +CONFIG_REGULATOR_TPS6507X=m +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DMA_CONTIG=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_IR_I2C=m +CONFIG_VIDEO_TVAUDIO=m +CONFIG_VIDEO_TDA7432=m +CONFIG_VIDEO_TDA9840=m +CONFIG_VIDEO_TEA6415C=m +CONFIG_VIDEO_TEA6420=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_M52790=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_WM8739=m +CONFIG_VIDEO_VP27SMPX=m +CONFIG_VIDEO_SAA6588=m +CONFIG_VIDEO_BT819=m +CONFIG_VIDEO_BT856=m +CONFIG_VIDEO_BT866=m +CONFIG_VIDEO_KS0127=m +CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_MT9V011=m +CONFIG_VIDEO_SAA7110=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_SAA717X=m +CONFIG_VIDEO_TVP5150=m +CONFIG_VIDEO_VPX3220=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_SAA7127=m +CONFIG_VIDEO_SAA7185=m +CONFIG_VIDEO_ADV7170=m +CONFIG_VIDEO_ADV7175=m +CONFIG_VIDEO_UPD64031A=m +CONFIG_VIDEO_UPD64083=m +CONFIG_VIDEO_VIVI=m +CONFIG_VIDEO_BT848=m +CONFIG_VIDEO_BWQCAM=m +CONFIG_VIDEO_CQCAM=m +CONFIG_VIDEO_W9966=m +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_PP=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_CPIA2=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_VIDEO_STRADIS=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_ZR36060=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_ZORAN_AVS6EYES=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_SAA7134_ALSA=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_CX88_ALSA=m +CONFIG_VIDEO_CX88_BLACKBIRD=m +CONFIG_VIDEO_CX88_MPEG=m +CONFIG_VIDEO_IVTV=m +CONFIG_VIDEO_FB_IVTV=m +CONFIG_VIDEO_CAFE_CCIC=m +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_MT9M001=m +CONFIG_SOC_CAMERA_MT9M111=m +CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9V022=m +CONFIG_SOC_CAMERA_TW9910=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_SOC_CAMERA_OV772X=m +CONFIG_VIDEO_SH_MOBILE_CEU=m +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SN9C20X_EVDEV=y +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +# CONFIG_USB_QUICKCAM_MESSENGER is not set +CONFIG_USB_ET61X251=m +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +# CONFIG_USB_OV511 is not set +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +CONFIG_USB_ZC0301=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +CONFIG_I2C_SI4713=m +CONFIG_RADIO_SI4713=m +# CONFIG_USB_DSBR is not set +CONFIG_RADIO_SI470X=y +CONFIG_USB_SI470X=m +CONFIG_I2C_SI470X=m +CONFIG_USB_MR800=m +CONFIG_RADIO_TEA5764=m +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +CONFIG_VGA_ARB=y +# CONFIG_DRM is not set +CONFIG_VGASTATE=m +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_SVGALIB=m +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +CONFIG_FB_CIRRUS=m +# CONFIG_FB_PM2 is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +CONFIG_FB_S3=m +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +CONFIG_FB_VIA=m +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +CONFIG_FB_ARK=m +CONFIG_FB_PM3=m +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_TMIO is not set +CONFIG_FB_SM501=m +CONFIG_FB_VIRTUAL=m +CONFIG_FB_METRONOME=m +CONFIG_FB_MB862XX=m +CONFIG_FB_MB862XX_PCI_GDC=y +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_WM831X=m + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=m + +# +# Display hardware drivers +# + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_RAWMIDI_SEQ=m +CONFIG_SND_OPL3_LIB_SEQ=m +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +CONFIG_SND_MTS64=m +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PORTMAN2X4=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 +CONFIG_SND_PCI=y +CONFIG_SND_AD1889=m +CONFIG_SND_ALS300=m +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_OXYGEN_LIB=m +CONFIG_SND_OXYGEN=m +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +CONFIG_SND_CS5535AUDIO=m +CONFIG_SND_CTXFI=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +CONFIG_SND_HDSPM=m +CONFIG_SND_HIFIER=m +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +CONFIG_SND_LX6464ES=m +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +CONFIG_SND_PCXHR=m +CONFIG_SND_RIPTIDE=m +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +CONFIG_SND_VIRTUOSO=m +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_ARM=y +# CONFIG_SND_ARMAACI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EZKEY=m +CONFIG_HID_KYE=m +CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LOGITECH=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_NTRIG=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TOPSEED=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=m +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_C67X00_HCD=m +CONFIG_USB_XHCI_HCD=m +# CONFIG_USB_XHCI_HCD_DEBUGGING is not set +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +CONFIG_USB_ISP116X_HCD=m +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_HCD_SSB is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m + +# +# Enable Host or Gadget support to see Inventra options +# +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_BERRY_CHARGE=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_VST=m +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_NOP_USB_XCEIV=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_WLP=m +CONFIG_UWB_I1480U=m +CONFIG_UWB_I1480U_WLP=m +# CONFIG_MMC is not set +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_WM831X_STATUS=m +CONFIG_LEDS_WM8350=m +CONFIG_LEDS_BD2802=m + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_USER_MEM=y +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_MTHCA_DEBUG=y +CONFIG_INFINIBAND_AMSO1100=m +# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set +CONFIG_MLX4_INFINIBAND=m +CONFIG_INFINIBAND_NES=m +# CONFIG_INFINIBAND_NES_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_ISER=m +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +# CONFIG_RTC_DRV_M41T80_WDT is not set +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=m +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_V3020=m +CONFIG_RTC_DRV_WM831X=m +CONFIG_RTC_DRV_WM8350=m +CONFIG_RTC_DRV_PCF50633=m +CONFIG_RTC_DRV_AB3100=m + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PL030 is not set +CONFIG_RTC_DRV_PL031=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_SMX=m +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_ET131X is not set +# CONFIG_VIDEO_GO7007 is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_POCH is not set +# CONFIG_BRCM80211 is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_PANEL is not set +# CONFIG_ALTERA_PCIE_CHDMA is not set +# CONFIG_RTL8187SE is not set +# CONFIG_RTL8192SU is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTL8192E is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_B3DFG is not set +# CONFIG_IDE_PHISON is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set +# CONFIG_VME_BUS is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set +# CONFIG_RAMZSWAP is not set + +# +# Speakup console speech +# +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_ACNTPC=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +CONFIG_SPEAKUP_SYNTH_DTLK=m +CONFIG_SPEAKUP_SYNTH_KEYPC=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +# CONFIG_FB_XGI is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=y +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_OCFS2_FS_POSIX_ACL=y +CONFIG_BTRFS_FS=y +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=m +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_GENERIC_ACL=y + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set +CONFIG_AUFS_FS=m +CONFIG_AUFS_BRANCH_MAX_127=y +# CONFIG_AUFS_BRANCH_MAX_511 is not set +# CONFIG_AUFS_BRANCH_MAX_1023 is not set +# CONFIG_AUFS_BRANCH_MAX_32767 is not set +# CONFIG_AUFS_HINOTIFY is not set +# CONFIG_AUFS_EXPORT is not set +# CONFIG_AUFS_RDU is not set +# CONFIG_AUFS_SP_IATTR is not set +# CONFIG_AUFS_SHWH is not set +# CONFIG_AUFS_BR_RAMFS is not set +# CONFIG_AUFS_BR_FUSE is not set +CONFIG_AUFS_BDEV_LOOP=y +# CONFIG_AUFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_NFS_FSCACHE=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_EXPERIMENTAL=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +# CONFIG_NCPFS_SMALLDOS is not set +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +# CONFIG_AFS_DEBUG is not set +CONFIG_AFS_FSCACHE=y +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_KARMA_PARTITION=y +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_MASK=0x01b6 +CONFIG_STRIP_ASM_SYMS=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_BOOT_TRACER=y +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_PATH=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +CONFIG_LSM_MMAP_MIN_ADDR=32768 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +CONFIG_SECURITY_TOMOYO=y +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_HIFN_795X=m +CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y +CONFIG_LRU_CACHE=m diff -Nru linux-3.2.21/debian/config/armhf/config.rpi linux-3.2.21/debian/config/armhf/config.rpi --- linux-3.2.21/debian/config/armhf/config.rpi 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/config/armhf/config.rpi 2012-06-24 01:29:42.000000000 +0100 @@ -0,0 +1,3497 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm 3.2.18-rpi1 Kernel Configuration +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_SCHED_CLOCK=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_USES_GETTIMEOFFSET is not set +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_KTIME_SCALAR=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_NEED_MACH_MEMORY_H=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_HAVE_IRQ_WORK=y +CONFIG_IRQ_WORK=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_FHANDLE=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SPARSE_IRQ=y +CONFIG_GENERIC_IRQ_SHOW=y +# CONFIG_SPARSE_IRQ is not set + +# +# RCU Subsystem +# +CONFIG_TINY_RCU=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_MM_OWNER=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +# CONFIG_UID16 is not set +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_THROTTLING is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_PRIMA2 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_MXS is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LPC32XX is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_PICOXCELL is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P64X0 is not set +# CONFIG_ARCH_S5PC100 is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_TCC_926 is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set +CONFIG_ARCH_BCM2708=y +# CONFIG_ARCH_VT8500 is not set +# CONFIG_ARCH_ZYNQ is not set +CONFIG_GPIO_PCA953X=m +CONFIG_KEYBOARD_GPIO_POLLED=m + +# +# System MMU +# + +# +# Broadcom BCM2708 Implementations +# +CONFIG_MACH_BCM2708=y +CONFIG_BCM2708_GPIO=y +CONFIG_BCM2708_VCMEM=y +# CONFIG_BCM2708_NOL2CACHE is not set + +# +# Processor Type +# +CONFIG_CPU_V6=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_USE_DOMAINS=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +CONFIG_CPU_HAS_PMU=y +# CONFIG_ARM_ERRATA_326103 is not set +CONFIG_ARM_ERRATA_411920=y +# CONFIG_ARM_ERRATA_364296 is not set + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_COUNT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HAVE_ARCH_PFN_VALID=y +# CONFIG_HIGHMEM is not set +CONFIG_HW_PERF_EVENTS=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_COMPACTION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NEED_PER_CPU_KM=y +# CONFIG_CLEANCACHE is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set +# CONFIG_SECCOMP is not set +CONFIG_CC_STACKPROTECTOR=y +# CONFIG_DEPRECATED_PARAM_STRUCT is not set + +# +# Boot options +# +# CONFIG_USE_OF is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait" +CONFIG_CMDLINE_FROM_BOOTLOADER=y +# CONFIG_CMDLINE_EXTEND is not set +# CONFIG_CMDLINE_FORCE is not set +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_AUTO_ZRELADDR is not set + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_PM_SLEEP=y +CONFIG_PM_RUNTIME=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_APM_EMULATION is not set +CONFIG_PM_CLK=y +CONFIG_CPU_PM=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m + +# +# DECnet: Netfilter Configuration +# +CONFIG_DECNET_NF_GRABULATOR=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_NET_DCCPPROBE=m +CONFIG_IP_SCTP=m +CONFIG_NET_SCTPPROBE=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set +CONFIG_TIPC=m +CONFIG_TIPC_ADVANCED=y +CONFIG_TIPC_PORTS=8191 +CONFIG_TIPC_LOG=0 +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +# CONFIG_L2TP_DEBUGFS is not set +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_DECNET=m +# CONFIG_DECNET_ROUTER is not set +CONFIG_LLC=m +CONFIG_LLC2=m +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +CONFIG_LAPB=m +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +CONFIG_PHONET=m +CONFIG_IEEE802154=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=y +CONFIG_BATMAN_ADV=m +# CONFIG_BATMAN_ADV_DEBUG is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +CONFIG_AX25=m +# CONFIG_AX25_DAMA_SLAVE is not set +CONFIG_NETROM=m +CONFIG_ROSE=m + +# +# AX.25 network device drivers +# +CONFIG_MKISS=m +CONFIG_6PACK=m +CONFIG_BPQETHER=m +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_YAM=m +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +CONFIG_CAN_SLCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +# CONFIG_CAN_MCP251X is not set +CONFIG_CAN_SJA1000=m +# CONFIG_CAN_SJA1000_PLATFORM is not set +# CONFIG_CAN_C_CAN is not set + +# +# CAN USB interfaces +# +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_SOFTING=m +# CONFIG_CAN_DEBUG_DEVICES is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +CONFIG_DONGLE=y +CONFIG_ESI_DONGLE=m +CONFIG_ACTISYS_DONGLE=m +CONFIG_TEKRAM_DONGLE=m +CONFIG_TOIM3232_DONGLE=m +CONFIG_LITELINK_DONGLE=m +CONFIG_MA600_DONGLE=m +CONFIG_GIRBIL_DONGLE=m +CONFIG_MCP2120_DONGLE=m +CONFIG_OLD_BELKIN_DONGLE=m +CONFIG_ACT200L_DONGLE=m +CONFIG_KINGSUN_DONGLE=m +CONFIG_KSDAZZLE_DONGLE=m +CONFIG_KS959_DONGLE=m + +# +# FIR device drivers +# +CONFIG_USB_IRDA=m +CONFIG_SIGMATEL_FIR=m +CONFIG_MCS_FIR=m +CONFIG_BT=m +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +CONFIG_RXKAD=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +CONFIG_RFKILL_GPIO=m +CONFIG_NET_9P=m +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set +CONFIG_NFC=m +CONFIG_NFC_NCI=m + +# +# Near Field Communication (NFC) devices +# +# CONFIG_PN544_NFC is not set +CONFIG_NFC_PN533=m + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_DEVTMPFS=y +# CONFIG_DEVTMPFS_MOUNT is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=m +CONFIG_MTD_TESTS=m +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=m +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=m +CONFIG_M25PXX_USE_FAST_READ=y +CONFIG_MTD_SST25L=m +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_MG_DISK is not set +CONFIG_BLK_DEV_RBD=m +# CONFIG_SENSORS_LIS3LV02D is not set +CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set +# CONFIG_ATMEL_PWM is not set +# CONFIG_ICS932S401 is not set +CONFIG_ENCLOSURE_SERVICES=m +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1780 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_BMP085 is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +CONFIG_IWMC3200TOP=m +# CONFIG_IWMC3200TOP_DEBUG is not set +# CONFIG_IWMC3200TOP_DEBUGFS is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set +CONFIG_BCM2708_VCHIQ=y + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_SCSI_DH=m +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_BUFIO=m +CONFIG_DM_PERSISTENT_DATA=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +# CONFIG_DM_DEBUG_SPACE_MAPS is not set +CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +# CONFIG_TARGET_CORE is not set +CONFIG_NETDEVICES=y +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_MII=y +CONFIG_IEEE802154_DRIVERS=m +# CONFIG_IEEE802154_FAKEHARD is not set +CONFIG_IFB=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_ATM_DRIVERS=y +CONFIG_ATM_DUMMY=m +CONFIG_ATM_TCP=m + +# +# CAIF transport drivers +# +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_DM9000 is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_FARADAY=y +# CONFIG_FTMAC100 is not set +# CONFIG_FTGMAC100 is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_NET_VENDOR_I825XX is not set +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +CONFIG_NET_VENDOR_NATSEMI=y +CONFIG_NET_VENDOR_8390=y +# CONFIG_AX88796 is not set +# CONFIG_ETHOC is not set +CONFIG_NET_VENDOR_SEEQ=y +# CONFIG_SEEQ8005 is not set +CONFIG_NET_VENDOR_SMSC=y +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +CONFIG_NET_VENDOR_STMICRO=y +# CONFIG_STMMAC_ETH is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +CONFIG_MDIO_BITBANG=m +# CONFIG_MDIO_GPIO is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +CONFIG_USB_KC2190=y +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_WLAN=y +CONFIG_LIBERTAS_THINFIRM=m +# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_AT76C50X_USB=m +CONFIG_USB_ZD1201=m +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y +CONFIG_MAC80211_HWSIM=m +CONFIG_ATH_COMMON=m +# CONFIG_ATH_DEBUG is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K=m +# CONFIG_ATH9K_AHB is not set +# CONFIG_ATH9K_DEBUGFS is not set +CONFIG_ATH9K_RATE_CONTROL=y +CONFIG_ATH9K_HTC=m +# CONFIG_ATH9K_HTC_DEBUGFS is not set +CONFIG_CARL9170=m +CONFIG_CARL9170_LEDS=y +CONFIG_CARL9170_WPC=y +# CONFIG_ATH6KL is not set +CONFIG_B43=m +CONFIG_B43_BCMA=y +CONFIG_B43_SSB=y +# CONFIG_B43_SDIO is not set +CONFIG_B43_BCMA_PIO=y +CONFIG_B43_PIO=y +# CONFIG_B43_PHY_N is not set +CONFIG_B43_PHY_LP=y +# CONFIG_B43_PHY_HT is not set +CONFIG_B43_LEDS=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_DEBUG=y +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +# CONFIG_BRCMFMAC is not set +CONFIG_HOSTAP=m +# CONFIG_HOSTAP_FIRMWARE is not set +CONFIG_IWM=m +# CONFIG_IWM_DEBUG is not set +# CONFIG_IWM_TRACING is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_MESH is not set +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +# CONFIG_P54_SPI is not set +CONFIG_P54_LEDS=y +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT53XX=y +# CONFIG_RT2800USB_UNKNOWN is not set +CONFIG_RT2800_LIB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTL8192C_COMMON=m +CONFIG_WL1251=m +# CONFIG_WL1251_SPI is not set +# CONFIG_WL1251_SDIO is not set +CONFIG_WL12XX_MENU=m +# CONFIG_WL12XX is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m + +# +# WiMAX Wireless Broadband devices +# +CONFIG_WIMAX_I2400M=m +CONFIG_WIMAX_I2400M_USB=m +# CONFIG_WIMAX_I2400M_SDIO is not set +CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 +# CONFIG_WAN is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=m +# CONFIG_KEYBOARD_TCA6416 is not set +CONFIG_KEYBOARD_MATRIX=m +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_SERIAL=m +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +CONFIG_MOUSE_GPIO=m +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_AS5011 is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_USB_WACOM=m +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +CONFIG_TOUCHSCREEN_AD7879=m +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_HAMPSHIRE=m +# CONFIG_TOUCHSCREEN_EETI is not set +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y +CONFIG_TOUCHSCREEN_USB_NEXIO=y +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_TSC_SERIO=m +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_TOUCHSCREEN_W90X900=m +# CONFIG_TOUCHSCREEN_ST1232 is not set +# CONFIG_TOUCHSCREEN_TPS6507X is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AD714X=m +CONFIG_INPUT_AD714X_I2C=m +CONFIG_INPUT_AD714X_SPI=m +CONFIG_INPUT_BMA150=m +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MPU3050 is not set +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +# CONFIG_INPUT_KXTJ9 is not set +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF8574 is not set +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_ADXL34X_I2C=m +CONFIG_INPUT_ADXL34X_SPI=m +CONFIG_INPUT_CMA3000=m +# CONFIG_INPUT_CMA3000_I2C is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_LIBPS2 is not set +CONFIG_SERIO_RAW=m +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +CONFIG_GAMEPORT=m +CONFIG_GAMEPORT_NS558=m +CONFIG_GAMEPORT_L4=m + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +# CONFIG_DEVKMEM is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_SHARE_IRQ is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX3107 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_TTY_PRINTK is not set +# CONFIG_HVC_DCC is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_TCG_TPM is not set +CONFIG_RAMOOPS=m +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_MUX=m + +# +# Multiplexer I2C Chip support +# +CONFIG_I2C_MUX_GPIO=m +CONFIG_I2C_MUX_PCA9541=m +CONFIG_I2C_MUX_PCA954x=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BCM2708=m +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set +CONFIG_I2C_GPIO=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +CONFIG_I2C_TINY_USB=m + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +CONFIG_SPI_BCM2708=m +CONFIG_SPI_BITBANG=m +CONFIG_SPI_GPIO=m +# CONFIG_SPI_OC_TINY is not set +# CONFIG_SPI_PL022 is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +CONFIG_PPS=m +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=m + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MAX730X=m + +# +# Memory mapped GPIO drivers: +# +# CONFIG_GPIO_GENERIC_PLATFORM is not set +# CONFIG_GPIO_IT8761E is not set +# CONFIG_GPIO_PL061 is not set + +# +# I2C GPIO expanders: +# +CONFIG_GPIO_MAX7300=m +CONFIG_GPIO_MAX732X=m +CONFIG_GPIO_PCF857X=m +# CONFIG_GPIO_SX150X is not set +CONFIG_GPIO_ADP5588=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +CONFIG_GPIO_MAX7301=m +CONFIG_GPIO_MCP23S08=m +CONFIG_GPIO_MC33880=m +CONFIG_GPIO_74X164=m + +# +# AC97 GPIO expanders: +# + +# +# MODULbus GPIO expanders: +# +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_W1_MASTER_GPIO=m + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2408=m +CONFIG_W1_SLAVE_DS2423=m +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +CONFIG_W1_SLAVE_DS2433_CRC=y +CONFIG_W1_SLAVE_DS2760=m +CONFIG_W1_SLAVE_DS2780=m +CONFIG_W1_SLAVE_BQ27000=m +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=m +# CONFIG_TEST_POWER is not set +CONFIG_BATTERY_DS2760=m +CONFIG_BATTERY_DS2780=m +CONFIG_BATTERY_DS2782=m +CONFIG_BATTERY_BQ20Z75=m +CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_BQ27X00_I2C=y +CONFIG_BATTERY_BQ27X00_PLATFORM=y +CONFIG_BATTERY_MAX17040=m +CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_MAX8903=m +CONFIG_CHARGER_GPIO=m +CONFIG_HWMON=m +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +CONFIG_SENSORS_AD7314=m +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADCXX=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_GPIO_FAN=m +# CONFIG_SENSORS_IT87 is not set +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_LINEAGE=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM70=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_MAX1111=m +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +CONFIG_SENSORS_MAX16064=m +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SMM665=m +# CONFIG_SENSORS_DME1737 is not set +CONFIG_SENSORS_EMC1403=m +CONFIG_SENSORS_EMC2103=m +CONFIG_SENSORS_EMC6W201=m +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH56XX_COMMON is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_ADS7871=m +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +# CONFIG_SENSORS_VT1211 is not set +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_CORE is not set +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +CONFIG_BCM2708_WDT=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +# CONFIG_SSB_SDIOHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +CONFIG_BCMA=m +CONFIG_BCMA_BLOCKIO=y +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13XXX is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_REGULATOR is not set +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +# CONFIG_VIDEO_V4L2_SUBDEV_API is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_RC_CORE=m +CONFIG_LIRC=m +CONFIG_RC_MAP=m +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_RC5_SZ_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m +CONFIG_IR_LIRC_CODEC=m +CONFIG_RC_ATI_REMOTE=m +CONFIG_IR_IMON=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +# CONFIG_RC_LOOPBACK is not set +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_CUSTOMISE=y + +# +# Customize TV tuners +# +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +# CONFIG_MEDIA_TUNER_XC4000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +# CONFIG_MEDIA_TUNER_MC44S803 is not set +# CONFIG_MEDIA_TUNER_MAX2165 is not set +# CONFIG_MEDIA_TUNER_TDA18218 is not set +# CONFIG_MEDIA_TUNER_TDA18212 is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +CONFIG_VIDEO_IR_I2C=m + +# +# Encoders, decoders, sensors and other helper chips +# + +# +# Audio decoders, processors and mixers +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA7191 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_AK881X is not set + +# +# Camera sensor devices +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SR030PC30 is not set + +# +# Flash devices +# +# CONFIG_VIDEO_ADP1653 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set + +# +# Miscelaneous helper chips +# +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA2 is not set +CONFIG_SOC_CAMERA=m +# CONFIG_SOC_CAMERA_IMX074 is not set +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV2640 is not set +# CONFIG_SOC_CAMERA_OV5642 is not set +# CONFIG_SOC_CAMERA_OV6650 is not set +# CONFIG_SOC_CAMERA_OV772X is not set +# CONFIG_SOC_CAMERA_OV9640 is not set +# CONFIG_SOC_CAMERA_OV9740 is not set +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +CONFIG_USB_GSPCA_TOPRO=m +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +CONFIG_VIDEO_TM6000=m +CONFIG_VIDEO_TM6000_ALSA=m +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_V4L_MEM2MEM_DRIVERS=y +# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_I2C_SI4713 is not set +# CONFIG_RADIO_SI4713 is not set +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_SAA7706H is not set +# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_WL1273 is not set + +# +# Texas Instruments WL128x FM driver (ST based) +# +# CONFIG_RADIO_WL128X is not set + +# +# Graphics support +# +CONFIG_DRM=m +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +# CONFIG_FB_WMT_GE_ROPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_BCM2708=y +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SMSCUFX=m +CONFIG_FB_UDL=m +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_MPU401_UART=m +CONFIG_SND_DRIVERS=y +CONFIG_SND_DUMMY=m +CONFIG_SND_ALOOP=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_ARM=y +# CONFIG_SND_ARMAACI is not set +CONFIG_SND_BCM2835=m +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_CAIAQ=m +# CONFIG_SND_USB_CAIAQ_INPUT is not set +CONFIG_SND_USB_6FIRE=m +# CONFIG_SND_SOC is not set +CONFIG_SOUND_PRIME=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_ACRUX=m +# CONFIG_HID_ACRUX_FF is not set +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +# CONFIG_HID_PRODIKEYS is not set +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_EZKEY=m +CONFIG_HID_HOLTEK=m +# CONFIG_HOLTEK_FF is not set +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LCPOWER=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_DJ=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +CONFIG_LOGIWHEELS_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=m +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +# CONFIG_HID_PICOLCD_FB is not set +# CONFIG_HID_PICOLCD_BACKLIGHT is not set +# CONFIG_HID_PICOLCD_LCD is not set +# CONFIG_HID_PICOLCD_LEDS is not set +CONFIG_HID_PRIMAX=m +CONFIG_HID_QUANTA=m +CONFIG_HID_ROCCAT=m +CONFIG_HID_ROCCAT_COMMON=m +CONFIG_HID_ROCCAT_ARVO=m +CONFIG_HID_ROCCAT_KONE=m +CONFIG_HID_ROCCAT_KONEPLUS=m +CONFIG_HID_ROCCAT_KOVAPLUS=m +CONFIG_HID_ROCCAT_PYRA=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SPEEDLINK=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=m +CONFIG_HID_THRUSTMASTER=m +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_WACOM=m +# CONFIG_HID_WACOM_POWER_SUPPLY is not set +CONFIG_HID_WIIMOTE=m +CONFIG_HID_ZEROPLUS=m +# CONFIG_ZEROPLUS_FF is not set +CONFIG_HID_ZYDACRON=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_ARCH_HAS_XHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_DWC3 is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_DWCOTG=y + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=y +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m +CONFIG_USB_SERIAL_ZIO=m +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +# CONFIG_USB_ATM is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_ARMMMCI is not set +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set +CONFIG_MMC_SDHCI_BCM2708=y +CONFIG_MMC_SDHCI_BCM2708_DMA=y +# CONFIG_MMC_BCM2708 is not set +CONFIG_MMC_SPI=m +# CONFIG_MMC_DW is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_LM3530=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_PCA9532_GPIO=y +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_LT3593=m +# CONFIG_LEDS_RENESAS_TPU is not set +CONFIG_LEDS_TRIGGERS=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +# CONFIG_RTC_DRV_M41T80_WDT is not set +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m + +# +# SPI RTC drivers +# +CONFIG_RTC_DRV_M41T93=m +CONFIG_RTC_DRV_M41T94=m +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1390=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_DS3234=m +CONFIG_RTC_DRV_PCF2123=m + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PL030 is not set +# CONFIG_RTC_DRV_PL031 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m + +# +# Virtio drivers +# +# CONFIG_VIRTIO_BALLOON is not set +# CONFIG_VIRTIO_MMIO is not set +CONFIG_STAGING=y +# CONFIG_USBIP_CORE is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_R8712U is not set +# CONFIG_RTS5139 is not set +# CONFIG_TRANZPORT is not set +# CONFIG_POHMELFS is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6656 is not set +# CONFIG_IIO is not set +# CONFIG_XVMALLOC is not set +# CONFIG_ZRAM is not set +# CONFIG_FB_SM7XX is not set +# CONFIG_USB_ENESTORAGE is not set +# CONFIG_BCM_WIMAX is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +# CONFIG_SPEAKUP is not set +# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +# CONFIG_STAGING_MEDIA is not set +CONFIG_CLKDEV_LOOKUP=y + +# +# Hardware Spinlock drivers +# +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_VIRT_DRIVERS is not set +# CONFIG_PM_DEVFREQ is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=m +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_GENERIC_ACL=y + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +# CONFIG_JFFS2_FS is not set +CONFIG_LOGFS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +# CONFIG_HPFS_FS is not set +CONFIG_QNX4FS_FS=m +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_PSTORE=y +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_PNFS_FILE_LAYOUT=m +CONFIG_PNFS_BLOCK=m +CONFIG_NFS_FSCACHE=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFS_USE_NEW_IDMAPPER is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_CEPH_FS=m +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_FSCACHE=y +CONFIG_CIFS_ACL=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +# CONFIG_NCPFS_SMALLDOS is not set +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +# CONFIG_AFS_DEBUG is not set +CONFIG_AFS_FSCACHE=y +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +CONFIG_ACORN_PARTITION=y +# CONFIG_ACORN_PARTITION_CUMANA is not set +# CONFIG_ACORN_PARTITION_EESOX is not set +CONFIG_ACORN_PARTITION_ICS=y +# CONFIG_ACORN_PARTITION_ADFS is not set +# CONFIG_ACORN_PARTITION_POWERTEC is not set +CONFIG_ACORN_PARTITION_RISCIX=y +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +# CONFIG_LDM_DEBUG is not set +CONFIG_SGI_PARTITION=y +CONFIG_ULTRIX_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_HARDLOCKUP_DETECTOR is not set +# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_ATOMIC_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_BOOT_PRINTK_DELAY=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_EVENT_POWER_TRACING_DEPRECATED=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_KPROBE_EVENT is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_ASYNC_RAID6_TEST is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_STRICT_DEVMEM is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_LL_UART_NONE is not set +# CONFIG_DEBUG_ICEDCC is not set +CONFIG_DEBUG_BCM2708_UART0=y +CONFIG_EARLY_PRINTK=y +# CONFIG_OC_ETM is not set +# CONFIG_ARM_KPROBES_TEST is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_ENCRYPTED_KEYS=m +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY_DMESG_RESTRICT is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_USER_API=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=y +CONFIG_CRC8=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_XZ_DEC=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_AVERAGE=y +CONFIG_CORDIC=m diff -Nru linux-3.2.21/debian/config/armhf/defines linux-3.2.21/debian/config/armhf/defines --- linux-3.2.21/debian/config/armhf/defines 2012-06-03 16:54:26.000000000 +0100 +++ linux-3.2.21/debian/config/armhf/defines 2012-06-24 22:44:42.000000000 +0100 @@ -1,11 +1,10 @@ [base] flavours: - mx5 - omap - vexpress + rpi kernel-arch: arm [image] +initramfs: false suggests: fdutils configs: armel/config @@ -35,3 +34,17 @@ hardware: ARM Ltd. Versatile Express hardware-long: ARM Ltd. Versatile Express family of processors +[rpi_build] +image-file: arch/arm/boot/zImage + +[rpi_description] +hardware: Raspberry pi +hardware-long: Raspberry pi + +[qemu_build] +image-file: arch/arm/boot/zImage + +[qemu_description] +hardware: qemu +hardware-long: qemu-system-arm with options "-M versatilepb -cpu arm1136 -m 256" + diff -Nru linux-3.2.21/debian/config.defines.dump linux-3.2.21/debian/config.defines.dump --- linux-3.2.21/debian/config.defines.dump 2012-06-22 13:54:26.000000000 +0100 +++ linux-3.2.21/debian/config.defines.dump 2012-06-24 23:21:07.000000000 +0100 @@ -9,2159 +9,2202 @@ p3 (dp4 (S'description' -S'hppa' +S'armhf' p5 -NS'parisc64-smp' +NS'mx5' tp6 (dp7 S'hardware' p8 -S'multiprocessor 64-bit PA-RISC' +S'Freescale i.MX51' p9 -ss(S'image' -S'amd64' +sS'hardware-long' p10 -tp11 -(dp12 -S'configs' -p13 -(lp14 -S'kernelarch-x86/config' +S'Support for Freescale i.MX51 family of processors' +p11 +ss(S'description' +S'i386' +p12 +NS'486' +tp13 +(dp14 +S'hardware' p15 -asS'bootloaders' +S'older PCs' p16 -(lp17 -S'grub-pc' -p18 -aS'extlinux' +sS'parts' +p17 +(lp18 +S'up' p19 -aS'lilo' +asS'hardware-long' p20 -ass(S'build' -S's390x' +S'PCs with a single processor not supporting PAE' p21 -NS's390x' -tp22 -(dp23 -S'debug-info' -p24 -I01 -ss(S'description' -g5 -NS'parisc' -tp25 -(dp26 -S'hardware' +ss(S'image' +S'amd64' +p22 +tp23 +(dp24 +S'configs' +p25 +(lp26 +S'kernelarch-x86/config' p27 -S'32-bit PA-RISC' +asS'bootloaders' p28 -ss(S'description' -S'powerpc' -p29 -NS'powerpc64' -tp30 -(dp31 -S'hardware' +(lp29 +S'grub-pc' +p30 +aS'extlinux' +p31 +aS'lilo' p32 -S'64-bit PowerPC' +ass(S'description' +NS'rt' p33 -ss(S'base' -g10 -S'none' -p34 -tp35 -(dp36 -S'flavours' +tp34 +(dp35 +S'part-long-rt' +p36 +S'This kernel includes the PREEMPT_RT realtime patch set.' p37 -(lp38 -S'amd64' -p39 -ass(S'description' -S'mips' +sS'parts' +p38 +(lp39 +S'rt' p40 -NS'4kc-malta' -tp41 -(dp42 -S'hardware' +asS'part-short-rt' +p41 +S'PREEMPT_RT' +p42 +ss(S'base' +g22 +S'none' p43 -S'MIPS Malta' -p44 -sS'hardware-long' -p45 -S'MIPS Malta boards' +tp44 +(dp45 +S'flavours' p46 -ss(S'image' -S'ia64' -p47 -tp48 -(dp49 -S'suggests' -p50 -S'fdutils' +(lp47 +S'amd64' +p48 +ass(S'build' +g5 +NS'qemu' +tp49 +(dp50 +S'image-file' p51 -sS'bootloaders' +S'arch/arm/boot/zImage' p52 -(lp53 -S'elilo' -p54 -ass(S'description' -S'mipsel' -p55 -NS'sb1a-bcm91480b' -tp56 -(dp57 +ss(S'description' +S'armel' +p53 +NS'kirkwood' +tp54 +(dp55 S'hardware' +p56 +S'Marvell Kirkwood' +p57 +sS'hardware-long' p58 -S'BCM91480B' +S'Marvell Kirkwood based systems (SheevaPlug, QNAP TS-119/TS-219, etc)' p59 -sS'hardware-long' -p60 -S'Broadcom BCM91480B systems (aka BigSur)' -p61 ss(S'description' -g5 -NS'parisc64' -tp62 -(dp63 +S'mipsel' +p60 +NS'sb1-bcm91250a' +tp61 +(dp62 S'hardware' +p63 +S'BCM91250A' p64 -S'64-bit PA-RISC' +sS'hardware-long' p65 -ss(S'xen' -S'i386' +S'Broadcom BCM91250A systems (aka SWARM)' p66 -S'none' +ss(S'image' +S'ia64' p67 -S'amd64' tp68 (dp69 -S'flavours' +S'suggests' p70 -(lp71 -S'amd64' +S'fdutils' +p71 +sS'bootloaders' p72 -asS'dom0-support' -p73 -I01 -ss(S'image' -g21 -NS's390x-tape' -tp74 -(dp75 -S'configs' -p76 -(lp77 -S's390/config.s390x-tape' +(lp73 +S'elilo' +p74 +ass(S'build' +g53 +NS'ixp4xx' +tp75 +(dp76 +S'image-file' +p77 +S'arch/arm/boot/zImage' p78 -asS'override-localversion' +ss(S'xen' +g12 +S'none' p79 -S's390x' -p80 -sS'type' -p81 -S'plain-s390-tape' +S'amd64' +tp80 +(dp81 +S'flavours' p82 -sS'initramfs' -p83 -I00 -ss(S'version' +(lp83 +S'amd64' p84 -tp85 -(dp86 -S'abiname' -p87 -S'3.2.0-3' -p88 -sS'source' +asS'dom0-support' +p85 +I01 +ss(S'image' +S'powerpc' +p86 +NS'powerpc-smp' +tp87 +(dp88 +S'configs' p89 -V3.2.21-1 -p90 -ss(S'description' -g10 -g34 +(lp90 +S'powerpc/config.powerpc' +p91 +aS'powerpc/config.powerpc-smp' +p92 +ass(S'description' +g22 +g43 S'amd64' -tp91 -(dp92 +tp93 +(dp94 S'parts' -p93 -(lp94 -S'xen' p95 +(lp96 +S'xen' +p97 ass(S'base' -g5 -NS'parisc64' -tp96 -(dp97 -S'override-host-type' p98 -S'hppa64-linux-gnu' -p99 -sS'cflags' -p100 -S'-fno-cse-follow-jumps' -p101 -ss(S'description' -S'm68k' -p102 -NS'mvme16x' -tp103 -(dp104 -S'hardware' -p105 -S'Motorola MVME162/6/7, MVME172/7' -p106 -ss(S'base' -p107 S'ppc64' -p108 +p99 S'none' -p109 -tp110 -(dp111 +p100 +tp101 +(dp102 S'implicit-flavour' -p112 +p103 I01 sS'flavours' -p113 -(lp114 +p104 +(lp105 S'powerpc64' -p115 +p106 +ass(S'image' +S'sparc64' +p107 +NS'sparc64-smp' +tp108 +(dp109 +S'configs' +p110 +(lp111 +S'sparc/config.sparc64-smp' +p112 ass(S'description' -g10 -NS'amd64' -tp116 -(dp117 -S'hardware' +g12 +g79 +S'amd64' +tp113 +(dp114 +S'parts' +p115 +(lp116 +S'xen' +p117 +ass(S'base' +S'alpha' p118 -S'64-bit PCs' -p119 -sS'hardware-long' -p120 -S'PCs with AMD64 or Intel 64 processors' +tp119 +(dp120 +S'kernel-arch' p121 -ss(S'description' -g55 -NS'loongson-2f' -tp122 -(dp123 -S'hardware' -p124 -S'Loongson 2F' +S'alpha' +p122 +sS'featuresets' +p123 +(lp124 +g100 +asS'compiler' p125 -sS'hardware-long' +S'gcc-4.5' p126 -S'Lemote Loongson 2F systems' -p127 -ss(S'build' -S'armel' -p128 -NS'kirkwood' -tp129 -(dp130 -S'image-file' -p131 -S'arch/arm/boot/zImage' -p132 ss(S'build' -g128 -NS'mv78xx0' -tp133 -(dp134 +g5 +NS'omap' +tp127 +(dp128 S'image-file' -p135 +p129 S'arch/arm/boot/zImage' -p136 +p130 ss(S'description' -S'alpha' -p137 -NS'alpha-generic' -tp138 -(dp139 +S'sparc' +p131 +NS'sparc64-smp' +tp132 +(dp133 S'hardware' -p140 -S'Alpha' -p141 -sS'hardware-long' +p134 +S'multiprocessor 64-bit UltraSPARC' +p135 +ss(g98 +g5 +g100 +tp136 +(dp137 +g103 +I01 +sg104 +(lp138 +S'rpi' +p139 +ass(S'base' +g12 +S'rt' +tp140 +(dp141 +S'flavours' p142 -S'DEC Alpha systems with extended kernel start address (Wildfire, Titan, Marvel)' -p143 -ss(S'base' -g137 -tp144 -(dp145 -S'kernel-arch' -p146 -S'alpha' -p147 -sS'featuresets' +(lp143 +S'686-pae' +p144 +ass(g98 +g86 +g100 +tp145 +(dp146 +g103 +I01 +sg104 +(lp147 +S'powerpc' p148 -(lp149 -g109 -asS'compiler' +aS'powerpc-smp' +p149 +aS'powerpc64' p150 -S'gcc-4.5' -p151 -ss(S'description' -g66 -NS'686-pae' -tp152 -(dp153 +ass(S'description' +g118 +NS'alpha-legacy' +tp151 +(dp152 S'hardware' +p153 +S'Alpha Legacy' p154 -S'modern PCs' +sS'hardware-long' p155 -sS'parts' +S'DEC Alpha systems with legacy kernel start address' p156 -(lp157 -S'pae' -p158 -asS'hardware-long' +ss(S'image' +g86 +tp157 +(dp158 +S'suggests' p159 -S'PCs with one or more processors supporting PAE' +S'mkvmlinuz' p160 -ss(g107 -S'armhf' -p161 -g109 -tp162 -(dp163 -g112 -I01 -sg113 -(lp164 -S'mx5' -p165 -aS'omap' -p166 -aS'vexpress' -p167 -ass(S'base' -g161 +ss(S'image' +g53 +NS'kirkwood' +tp161 +(dp162 +S'check-size' +p163 +S'2097080' +p164 +sS'recommends' +p165 +S'uboot-mkimage' +p166 +ss(S'description' +S'sh4' +p167 +NS'sh7785lcr' tp168 (dp169 -S'kernel-arch' +S'hardware' p170 -S'arm' +S'sh7785lcr' p171 -sg148 -(lp172 -g109 -ass(S'base' -g66 +sS'hardware-long' +p172 +S'Renesas SH7785 reference board' +p173 +ss(S'base' +g22 S'rt' -tp173 -(dp174 +tp174 +(dp175 S'flavours' -p175 -(lp176 -S'686-pae' -p177 -ass(S'image' -S's390' +p176 +(lp177 +S'amd64' p178 -NS's390-tape' +ass(S'description' +g53 +NS'mv78xx0' tp179 (dp180 -S'override-localversion' +S'hardware' p181 -S's390' +S'Marvell 78xx0' p182 -sS'type' +sS'hardware-long' p183 -S'plain-s390-tape' +S'Marvell DB-78xx0-BP Development Board' p184 -sS'initramfs' -p185 -I00 -ss(g107 -g29 -g109 -tp186 -(dp187 -g112 -I01 -sg113 -(lp188 -S'powerpc' +ss(S'description' +g60 +NS'r5k-cobalt' +tp185 +(dp186 +S'hardware' +p187 +S'Cobalt' +p188 +sS'hardware-long' p189 -aS'powerpc-smp' +S'Cobalt systems (Qube, RaQ, Qube2, RaQ2)' p190 -aS'powerpc64' -p191 -ass(S'description' -S'sparc' -p192 -NS'sparc64' -tp193 -(dp194 -S'hardware' +ss(S'base' +g12 +tp191 +(dp192 +S'kernel-arch' +p193 +S'x86' +p194 +sS'featuresets' p195 -S'uniprocessor 64-bit UltraSPARC' -p196 -ss(S'image' -g66 -NS'amd64' -tp197 -(dp198 -S'configs' -p199 -(lp200 -S'kernelarch-x86/config-arch-64' +(lp196 +S'none' +p197 +aS'rt' +p198 +ass(S'base' +g60 +tp199 +(dp200 +S'kernel-arch' p201 -asS'recommends' +S'mips' p202 -S'libc6-i686' -p203 -ss(S'image' -g29 +sg123 +(lp203 +g100 +ass(S'base' tp204 (dp205 -S'suggests' +S'arches' p206 -S'mkvmlinuz' -p207 -ss(S'base' -g10 -S'rt' -tp208 -(dp209 -S'flavours' +(lp207 +S'alpha' +p208 +aS'amd64' +p209 +aS'armel' p210 -(lp211 -S'amd64' +aS'armhf' +p211 +aS'hppa' p212 -ass(S'description' -g102 -NS'atari' -tp213 -(dp214 -S'hardware' +aS'i386' +p213 +aS'ia64' +p214 +aS'm68k' p215 -S'Atari' +aS'mips' p216 -ss(S'description' -g40 -NS'r5k-ip32' -tp217 -(dp218 -S'hardware' +aS'mipsel' +p217 +aS'powerpc' +p218 +aS'ppc64' p219 -S'SGI IP32' +aS's390' p220 -sS'hardware-long' +aS's390x' p221 -S'SGI IP32 systems (O2)' +aS'sh4' p222 -ss(S'description' -g55 -NS'4kc-malta' -tp223 -(dp224 -S'hardware' +aS'sparc' +p223 +aS'sparc64' +p224 +asS'featuresets' p225 -S'MIPS Malta' -p226 -sS'hardware-long' +(lp226 +S'none' p227 -S'MIPS Malta boards' +aS'rt' p228 +asS'compiler' +p229 +S'gcc-4.6' +p230 ss(S'description' -g66 -g67 -S'amd64' -tp229 -(dp230 -S'parts' +S'm68k' p231 -(lp232 -S'xen' -p233 -ass(S'image' -g128 -NS'kirkwood' -tp234 -(dp235 -S'check-size' -p236 -S'2097080' -p237 -sS'recommends' +NS'amiga' +tp232 +(dp233 +S'hardware' +p234 +S'Amiga' +p235 +ss(S'description' +g5 +NS'rpi' +tp236 +(dp237 +S'hardware' p238 -S'uboot-mkimage' +S'Raspberry pi' p239 -ss(S'base' -g66 -tp240 -(dp241 -S'kernel-arch' -p242 -S'x86' -p243 -sS'featuresets' +sS'hardware-long' +p240 +S'Raspberry pi' +p241 +ss(S'description' +g53 +NS'iop32x' +tp242 +(dp243 +S'hardware' p244 -(lp245 -S'none' +S'IOP32x' +p245 +sS'hardware-long' p246 -aS'rt' +S'IOP32x based systems (Thecus N2100, etc)' p247 -ass(S'base' -g55 +ss(S'description' +g12 +NS'686-pae' tp248 (dp249 -S'kernel-arch' +S'hardware' p250 -S'mips' +S'modern PCs' p251 -sg148 -(lp252 -g109 -ass(S'base' -g5 -NS'parisc64-smp' -tp253 -(dp254 -S'override-host-type' +sS'parts' +p252 +(lp253 +S'pae' +p254 +asS'hardware-long' p255 -S'hppa64-linux-gnu' +S'PCs with one or more processors supporting PAE' p256 -sS'cflags' -p257 -S'-fno-cse-follow-jumps' -p258 -ss(S'description' -g40 -NS'sb1a-bcm91480b' -tp259 -(dp260 -S'hardware' -p261 -S'BCM91480B' -p262 -sS'hardware-long' -p263 -S'Broadcom BCM91480B systems (aka BigSur)' -p264 -ss(S'build' -g178 -NS's390-tape' -tp265 -(dp266 -S'modules' -p267 -I00 -ss(S'description' -g137 -NS'alpha-legacy' -tp268 -(dp269 -S'hardware' -p270 -S'Alpha Legacy' -p271 -sS'hardware-long' -p272 -S'DEC Alpha systems with legacy kernel start address' -p273 -ss(g107 -g55 -g109 -tp274 -(dp275 -g112 +ss(g98 +g60 +g100 +tp257 +(dp258 +g103 I01 -sg113 -(lp276 +sg104 +(lp259 S'r5k-cobalt' -p277 +p260 aS'sb1-bcm91250a' -p278 +p261 aS'sb1a-bcm91480b' -p279 +p262 aS'4kc-malta' -p280 +p263 aS'5kc-malta' -p281 +p264 aS'loongson-2f' -p282 +p265 ass(S'relations' -tp283 -(dp284 +tp266 +(dp267 S'initramfs-fallback' -p285 +p268 S'linux-initramfs-tool' -p286 +p269 sS'lilo' -p287 +p270 S'lilo (>= 22.8-8.2~)' -p288 +p271 sS'gcc-4.6' -p289 +p272 S'gcc-4.6' -p290 +p273 sS'gcc-4.5' -p291 +p274 S'gcc-4.5' -p292 +p275 sS'gcc-4.4' -p293 +p276 S'gcc-4.4' -p294 +p277 sS'elilo' -p295 +p278 S'elilo (>= 3.12-3.1~)' -p296 +p279 sS's390-tools' -p297 +p280 S's390-tools (>= 1.8.3-2~)' -p298 +p281 sS'initramfs-tools' -p299 +p282 S'initramfs-tools (>= 0.99~)' -p300 -ss(S'build' -g161 -NS'mx5' -tp301 -(dp302 +p283 +ss(S'image' +g5 +tp284 +(dp285 +S'suggests' +p286 +S'fdutils' +p287 +sS'configs' +p288 +(lp289 +S'armel/config' +p290 +aS'armhf/config' +p291 +asS'initramfs' +p292 +I00 +ss(g98 +g167 +g100 +tp293 +(dp294 +g103 +I01 +sg104 +(lp295 +S'sh7751r' +p296 +aS'sh7785lcr' +p297 +ass(S'build' +g5 +NS'vexpress' +tp298 +(dp299 S'image-file' -p303 +p300 S'arch/arm/boot/zImage' -p304 -ss(S'build' -g128 -NS'ixp4xx' -tp305 -(dp306 -S'image-file' +p301 +ss(S'base' +S'hppa' +p302 +NS'parisc64-smp' +tp303 +(dp304 +S'override-host-type' +p305 +S'hppa64-linux-gnu' +p306 +sS'cflags' p307 -S'arch/arm/boot/zImage' +S'-fno-cse-follow-jumps' p308 -ss(S'description' -g40 -NS'r4k-ip22' +ss(S'base' +g53 tp309 (dp310 -S'hardware' +S'kernel-arch' p311 -S'SGI IP22' +S'arm' p312 -sS'hardware-long' -p313 -S'SGI IP22 systems (Indy, Indigo2)' -p314 -ss(S'image' -g29 -NS'powerpc-smp' -tp315 -(dp316 -S'configs' +sg123 +(lp313 +g100 +ass(S'base' +g131 +tp314 +(dp315 +S'kernel-arch' +p316 +S'sparc' p317 +sg123 (lp318 -S'powerpc/config.powerpc' -p319 -aS'powerpc/config.powerpc-smp' -p320 +g100 +ass(S'build' +g53 +NS'kirkwood' +tp319 +(dp320 +S'image-file' +p321 +S'arch/arm/boot/zImage' +p322 +ss(S'abi' +Ng33 +tp323 +(dp324 +S'ignore-changes' +p325 +(lp326 +S'*' ass(S'description' -g40 -NS'5kc-malta' -tp321 -(dp322 -S'hardware' -p323 -S'MIPS Malta (64-bit)' -p324 +g5 +NS'qemu' +tp327 +(dp328 +S'hardware' +p329 +S'qemu' +p330 sS'hardware-long' -p325 -S'MIPS Malta boards (64-bit)' -p326 -ss(g107 -S'sh4' -p327 -g109 -tp328 -(dp329 -g112 -I01 -sg113 -(lp330 -S'sh7751r' p331 -aS'sh7785lcr' +S'qemu-system-arm with options "-M versatilepb -cpu arm1136 -m 256"' p332 -ass(S'description' -g161 -NS'mx5' -tp333 -(dp334 -S'hardware' -p335 -S'Freescale i.MX51' -p336 -sS'hardware-long' +ss(g98 +S's390' +p333 +g100 +tp334 +(dp335 +g103 +I01 +sg104 +(lp336 +S's390x' p337 -S'Support for Freescale i.MX51 family of processors' +aS's390x-tape' p338 -ss(S'description' -g128 -NS'kirkwood' -tp339 -(dp340 -S'hardware' -p341 -S'Marvell Kirkwood' -p342 -sS'hardware-long' +ass(g98 +S's390x' +p339 +g100 +tp340 +(dp341 +g103 +I01 +sg104 +(lp342 +S's390x' p343 -S'Marvell Kirkwood based systems (SheevaPlug, QNAP TS-119/TS-219, etc)' +aS's390x-tape' p344 -ss(S'base' -g128 -tp345 -(dp346 -S'kernel-arch' -p347 -S'arm' -p348 -sg148 -(lp349 -g109 ass(S'base' -g192 -tp350 -(dp351 +S'mips' +p345 +tp346 +(dp347 S'kernel-arch' -p352 -S'sparc' +p348 +S'mips' +p349 +sg123 +(lp350 +g100 +ass(S'build' +g333 +NS's390-tape' +tp351 +(dp352 +S'modules' p353 -sg148 -(lp354 -g109 -ass(S'description' -g192 -NS'sparc64-smp' -tp355 -(dp356 -S'hardware' -p357 -S'multiprocessor 64-bit UltraSPARC' -p358 -ss(S'description' -g102 -NS'mvme147' -tp359 -(dp360 -S'hardware' +I00 +ss(S'build' +g22 +tp354 +(dp355 +S'debug-info' +p356 +I01 +ss(S'image' +g60 +tp357 +(dp358 +S'configs' +p359 +(lp360 +S'kernelarch-mips/config' p361 -S'Motorola MVME147' +aS'mipsel/config' p362 -ss(g107 -g178 -g109 -tp363 -(dp364 -g112 -I01 -sg113 -(lp365 -S's390x' +asS'initramfs' +p363 +I00 +ss(S'description' +g107 +NS'sparc64' +tp364 +(dp365 +S'hardware' p366 -aS's390x-tape' +S'uniprocessor 64-bit UltraSPARC' p367 -ass(S'build' -g66 -NS'686-pae' +ss(S'xen' +g12 +g79 +S'686-pae' tp368 (dp369 -S'debug-info' +S'flavours' p370 -I01 -ss(g107 -g21 -g109 -tp371 -(dp372 -g112 -I01 -sg113 -(lp373 -S's390x' +(lp371 +S'i386' +p372 +aS'amd64' +p373 +asS'dom0-support' p374 -aS's390x-tape' -p375 -ass(S'base' -g40 -tp376 -(dp377 -S'kernel-arch' +I01 +ss(S'description' +g345 +NS'5kc-malta' +tp375 +(dp376 +S'hardware' +p377 +S'MIPS Malta (64-bit)' p378 -S'mips' +sS'hardware-long' p379 -sg148 -(lp380 -g109 -ass(S'description' -g21 -NS's390x' +S'MIPS Malta boards (64-bit)' +p380 +ss(S'description' +g5 +NS'vexpress' tp381 (dp382 S'hardware' p383 -S'IBM zSeries' +S'ARM Ltd. Versatile Express' p384 -sS'parts' +sS'hardware-long' p385 -(lp386 -S'reader' -p387 -ass(S'build' -g10 -tp388 -(dp389 -S'debug-info' +S'ARM Ltd. Versatile Express family of processors' +p386 +ss(S'image' +g60 +NS'loongson-2f' +tp387 +(dp388 +S'recommends' +p389 +S'libc6-loongson2f' p390 -I01 -ss(S'abi' -NS'rt' -p391 -tp392 -(dp393 -S'ignore-changes' +ss(S'base' +g22 +tp391 +(dp392 +S'kernel-arch' +p393 +S'x86' p394 -(lp395 -S'*' -ass(S'image' -g55 -tp396 -(dp397 -S'configs' +sS'featuresets' +p395 +(lp396 +S'none' +p397 +aS'rt' p398 -(lp399 -S'kernelarch-mips/config' -p400 -aS'mipsel/config' +ass(S'base' +g67 +tp399 +(dp400 +S'kernel-arch' p401 -asS'initramfs' +S'ia64' p402 -I00 -ss(S'xen' -g66 -g67 -S'686-pae' -tp403 -(dp404 -S'flavours' -p405 -(lp406 -S'i386' +sg123 +(lp403 +g100 +ass(S'description' +g60 +NS'5kc-malta' +tp404 +(dp405 +S'hardware' +p406 +S'MIPS Malta (64-bit)' p407 -aS'amd64' +sS'hardware-long' p408 -asS'dom0-support' +S'MIPS Malta boards (64-bit)' p409 -I01 ss(S'description' -g137 -NS'alpha-smp' +g118 +NS'alpha-generic' tp410 (dp411 S'hardware' p412 -S'Alpha SMP' +S'Alpha' p413 sS'hardware-long' p414 -S'DEC Alpha SMP systems with extended kernel start address (Wildfire, Titan, Marvel)' +S'DEC Alpha systems with extended kernel start address (Wildfire, Titan, Marvel)' p415 -ss(S'description' -S'sparc64' -p416 -NS'sparc64-smp' -tp417 -(dp418 -S'hardware' -p419 -S'multiprocessor 64-bit UltraSPARC' -p420 ss(S'base' -g10 +g333 +tp416 +(dp417 +S'kernel-arch' +p418 +S's390' +p419 +sg123 +(lp420 +g100 +ass(g98 +g53 +g100 tp421 (dp422 -S'kernel-arch' -p423 -S'x86' +g103 +I01 +sg104 +(lp423 +S'iop32x' p424 -sS'featuresets' +aS'ixp4xx' p425 -(lp426 -S'none' +aS'kirkwood' +p426 +aS'mv78xx0' p427 -aS'rt' +aS'orion5x' p428 -ass(S'base' -g47 -tp429 -(dp430 -S'kernel-arch' -p431 -S'ia64' +aS'versatile' +p429 +ass(S'description' +g231 +NS'atari' +tp430 +(dp431 +S'hardware' p432 -sg148 -(lp433 -g109 -ass(S'image' -g55 -NS'sb1-bcm91250a' +S'Atari' +p433 +ss(S'image' tp434 (dp435 -S'configs' +S'initramfs-generators' p436 (lp437 -S'mips/config.sb1-bcm91250a' +S'initramfs-tools' p438 -ass(S'build' -g178 -NS's390x' -tp439 -(dp440 -S'debug-info' +aS'initramfs-fallback' +p439 +asS'type' +p440 +S'plain' p441 -I01 -ss(S'image' -g327 -NS'sh7785lcr' +ss(S'description' +g345 +NS'sb1a-bcm91480b' tp442 (dp443 -S'check-size' +S'hardware' p444 -S'4194304' +S'BCM91480B' p445 -sS'recommends' +sS'hardware-long' p446 -S'uboot-mkimage' +S'Broadcom BCM91480B systems (aka BigSur)' p447 -ss(S'base' -g178 +ss(S'description' +g12 tp448 (dp449 -S'kernel-arch' +S'part-long-pae' p450 -S's390' +S'This kernel requires PAE (Physical Address Extension).\nThis feature is supported by the Intel Pentium Pro/II/III/4/4M/D, Xeon,\nCore and Atom; AMD Geode NX, Athlon (K7), Duron, Opteron, Sempron,\nTurion or Phenom; Transmeta Efficeon; VIA C7; and some other processors.' p451 -sg148 -(lp452 -g109 -ass(g107 -g128 -g109 -tp453 -(dp454 -g112 -I01 -sg113 -(lp455 -S'iop32x' -p456 -aS'ixp4xx' -p457 -aS'kirkwood' -p458 -aS'mv78xx0' -p459 -aS'orion5x' -p460 -aS'versatile' -p461 -ass(S'description' -g66 -NS'amd64' -tp462 -(dp463 -S'hardware' -p464 -S'64-bit PCs' -p465 -sS'hardware-long' -p466 -S'PCs with AMD64 or Intel 64 processors' -p467 ss(S'description' -g66 -tp468 -(dp469 -S'part-long-pae' -p470 -S'This kernel requires PAE (Physical Address Extension).\nThis feature is supported by the Intel Pentium Pro/II/III/4/4M/D, Xeon,\nCore and Atom; AMD Geode NX, Athlon (K7), Duron, Opteron, Sempron,\nTurion or Phenom; Transmeta Efficeon; VIA C7; and some other processors.' -p471 +g86 +NS'powerpc' +tp452 +(dp453 +S'hardware' +p454 +S'uniprocessor 32-bit PowerPC' +p455 ss(S'image' -g10 -NS'amd64' -tp472 -(dp473 +g60 +NS'sb1-bcm91250a' +tp456 +(dp457 S'configs' -p474 -(lp475 -S'kernelarch-x86/config-arch-64' -p476 -ass(S'description' -g178 -NS's390x' -tp477 -(dp478 -S'hardware' -p479 -S'IBM zSeries' -p480 -sS'parts' -p481 -(lp482 -S'reader' -p483 -ass(S'base' -g66 -g67 -tp484 -(dp485 -S'flavours' -p486 -(lp487 -S'486' -p488 -aS'686-pae' -p489 -aS'amd64' -p490 -ass(S'xen' -g10 -g34 +p458 +(lp459 +S'mips/config.sb1-bcm91250a' +p460 +ass(S'image' +g60 +NS'4kc-malta' +tp461 +(dp462 +S'configs' +p463 +(lp464 +S'mips/config.4kc-malta' +p465 +ass(S'image' +g131 +NS'sparc32' +tp466 +(dp467 +S'image-postproc' +p468 +S'sparc32-image-postproc' +p469 +ss(S'xen' +g22 +g43 S'amd64' -tp491 -(dp492 +tp470 +(dp471 S'flavours' -p493 -(lp494 +p472 +(lp473 S'amd64' -p495 +p474 asS'dom0-support' -p496 +p475 I01 -ss(S'description' -g21 -NS's390x-tape' -tp497 -(dp498 -S'hardware' +ss(S'image' +g12 +NS'486' +tp476 +(dp477 +S'configs' +p478 +(lp479 +S'kernelarch-x86/config-arch-32' +p480 +ass(S'image' +g53 +tp481 +(dp482 +S'suggests' +p483 +S'fdutils' +p484 +ss(S'image' +g333 +tp485 +(dp486 +S'bootloaders' +p487 +(lp488 +S's390-tools' +p489 +ass(S'image' +g339 +NS's390x' +tp490 +(dp491 +S'configs' +p492 +(lp493 +S's390/config.s390x' +p494 +ass(S'abi' +g339 +tp495 +(dp496 +S'ignore-changes' +p497 +(lp498 +S'arch_pick_mmap_layout' p499 -S'IBM zSeries' -p500 -sS'parts' -p501 -(lp502 -S'tape' -p503 ass(S'image' -g128 +g5 +NS'omap' +tp500 +(dp501 +S'recommends' +p502 +S'uboot-mkimage' +p503 +ss(S'image' +g302 tp504 (dp505 S'suggests' p506 -S'fdutils' +S'palo' p507 -ss(S'image' -g178 +ss(S'build' +g5 +NS'rpi' tp508 (dp509 -S'bootloaders' +S'image-file' p510 -(lp511 -S's390-tools' -p512 -ass(S'abi' -g21 -tp513 -(dp514 -S'ignore-changes' +S'arch/arm/boot/zImage' +p511 +ss(S'relations' +g302 +tp512 +(dp513 +S'gcc-4.4' +p514 +S'gcc-4.4, binutils-hppa64, gcc-4.4-hppa64' p515 -(lp516 -S'arch_pick_mmap_layout' -p517 -ass(S'image' -g66 -NS'486' -tp518 -(dp519 -S'configs' +ss(S'description' +g53 +NS'orion5x' +tp516 +(dp517 +S'hardware' +p518 +S'Marvell Orion' +p519 +sS'hardware-long' p520 -(lp521 -S'kernelarch-x86/config-arch-32' -p522 -ass(S'image' -g55 -NS'sb1a-bcm91480b' -tp523 -(dp524 -S'configs' +S'Marvell Orion 5181, 5182 and 5281 based systems (QNAP TS-109/TS-209, etc)' +p521 +ss(S'description' +g333 +NS's390-tape' +tp522 +(dp523 +S'hardware' +p524 +S'IBM S/390' p525 -(lp526 -S'mips/config.sb1a-bcm91480b' -p527 +sS'parts' +p526 +(lp527 +S'tape' +p528 +ass(S'abi' +g333 +tp529 +(dp530 +S'ignore-changes' +p531 +(lp532 +S'arch_pick_mmap_layout' +p533 ass(S'description' -g47 -NS'mckinley' -tp528 -(dp529 +g53 +NS'ixp4xx' +tp534 +(dp535 S'hardware' -p530 -S'Itanium II' -p531 -ss(S'relations' -g5 -tp532 -(dp533 -S'gcc-4.4' -p534 -S'gcc-4.4, binutils-hppa64, gcc-4.4-hppa64' -p535 -ss(S'image' -g161 -NS'omap' -tp536 -(dp537 -S'recommends' +p536 +S'IXP4xx' +p537 +sS'hardware-long' p538 -S'uboot-mkimage' +S'IXP4xx based systems (Linksys NSLU2, etc)' p539 ss(S'description' -g29 -NS'powerpc' +g118 +NS'alpha-smp' tp540 (dp541 S'hardware' p542 -S'uniprocessor 32-bit PowerPC' +S'Alpha SMP' p543 -ss(S'abi' -g178 -tp544 -(dp545 -S'ignore-changes' -p546 -(lp547 -S'arch_pick_mmap_layout' +sS'hardware-long' +p544 +S'DEC Alpha SMP systems with extended kernel start address (Wildfire, Titan, Marvel)' +p545 +ss(S'image' +g22 +NS'amd64' +tp546 +(dp547 +S'configs' p548 +(lp549 +S'kernelarch-x86/config-arch-64' +p550 ass(S'image' -g55 -NS'4kc-malta' -tp549 -(dp550 -S'configs' -p551 -(lp552 -S'mips/config.4kc-malta' +g99 +tp551 +(dp552 +S'suggests' p553 -ass(g107 -g5 -g109 -tp554 -(dp555 -g112 -I01 -sg113 +S'mkvmlinuz' +p554 +sS'configs' +p555 (lp556 -S'parisc' +S'powerpc/config' p557 +ass(g98 +g302 +g100 +tp558 +(dp559 +g103 +I01 +sg104 +(lp560 +S'parisc' +p561 aS'parisc-smp' -p558 +p562 aS'parisc64' -p559 -aS'parisc64-smp' -p560 -ass(S'build' -g178 -NS's390x-tape' -tp561 -(dp562 -S'modules' p563 -I00 -ss(S'image' -g137 -tp564 -(dp565 +aS'parisc64-smp' +p564 +ass(S'image' +g118 +tp565 +(dp566 S'suggests' -p566 -S'aboot, fdutils' p567 -ss(S'description' -g128 -NS'orion5x' -tp568 -(dp569 -S'hardware' -p570 -S'Marvell Orion' +S'aboot, fdutils' +p568 +ss(S'base' +g107 +tp569 +(dp570 +S'kernel-arch' p571 -sS'hardware-long' +S'sparc' p572 -S'Marvell Orion 5181, 5182 and 5281 based systems (QNAP TS-109/TS-209, etc)' -p573 -ss(S'base' -g416 +sg123 +(lp573 +g100 +ass(S'image' +g99 +NS'powerpc64' tp574 (dp575 -S'kernel-arch' +S'configs' p576 -S'sparc' -p577 -sg148 -(lp578 -g109 -ass(S'build' -g128 -NS'iop32x' -tp579 -(dp580 -S'image-file' -p581 -S'arch/arm/boot/zImage' +(lp577 +S'powerpc/config.powerpc64' +p578 +ass(S'version' +p579 +tp580 +(dp581 +S'abiname' p582 -ss(S'base' -NS'rt' -tp583 -(dp584 -S'enabled' +S'3.2.0-3' +p583 +sS'source' +p584 +V3.2.21-1+rpi1 p585 -I01 ss(S'description' -g55 -NS'5kc-malta' +g86 +NS'powerpc-smp' tp586 (dp587 S'hardware' p588 -S'MIPS Malta (64-bit)' +S'multiprocessor 32-bit PowerPC' p589 -sS'hardware-long' -p590 -S'MIPS Malta boards (64-bit)' -p591 ss(S'base' -g21 -tp592 -(dp593 +g339 +tp590 +(dp591 S'kernel-arch' -p594 +p592 S's390' -p595 -sg148 -(lp596 -g109 +p593 +sg123 +(lp594 +g100 ass(S'description' -g55 -NS'r5k-cobalt' -tp597 -(dp598 +g67 +NS'mckinley' +tp595 +(dp596 +S'hardware' +p597 +S'Itanium II' +p598 +ss(S'description' +g107 +NS'sparc64-smp' +tp599 +(dp600 S'hardware' -p599 -S'Cobalt' -p600 -sS'hardware-long' p601 -S'Cobalt systems (Qube, RaQ, Qube2, RaQ2)' +S'multiprocessor 64-bit UltraSPARC' p602 ss(S'image' -g55 -NS'loongson-2f' +g345 tp603 (dp604 -S'recommends' -p605 -S'libc6-loongson2f' -p606 -ss(S'build' -g128 -NS'orion5x' -tp607 -(dp608 -S'image-file' -p609 -S'arch/arm/boot/zImage' -p610 -ss(S'image' -g108 -tp611 -(dp612 -S'suggests' -p613 -S'mkvmlinuz' -p614 -sS'configs' -p615 -(lp616 -S'powerpc/config' -p617 -ass(S'image' -g40 -tp618 -(dp619 S'configs' -p620 -(lp621 +p605 +(lp606 S'kernelarch-mips/config' -p622 +p607 aS'mips/config' -p623 +p608 asS'initramfs' -p624 +p609 I00 ss(S'image' -g66 -tp625 -(dp626 +g12 +tp610 +(dp611 S'configs' -p627 -(lp628 +p612 +(lp613 S'kernelarch-x86/config' -p629 +p614 asS'bootloaders' -p630 -(lp631 +p615 +(lp616 S'grub-pc' -p632 +p617 aS'extlinux' -p633 +p618 aS'lilo' -p634 -ass(g107 -g192 -g109 -tp635 -(dp636 -g112 +p619 +ass(g98 +g131 +g100 +tp620 +(dp621 +g103 I01 -sg113 -(lp637 +sg104 +(lp622 S'sparc64' -p638 +p623 aS'sparc64-smp' -p639 +p624 ass(S'base' -g108 -tp640 -(dp641 +g99 +tp625 +(dp626 S'kernel-arch' -p642 +p627 S'powerpc' -p643 -sg148 -(lp644 -g109 -ass(g107 -g137 -g109 -tp645 -(dp646 -g112 +p628 +sg123 +(lp629 +g100 +ass(g98 +g118 +g100 +tp630 +(dp631 +g103 I01 -sg113 -(lp647 +sg104 +(lp632 S'alpha-generic' -p648 +p633 aS'alpha-smp' -p649 +p634 aS'alpha-legacy' -p650 +p635 ass(S'description' -g66 +g22 +NS'amd64' +tp636 +(dp637 +S'hardware' +p638 +S'64-bit PCs' +p639 +sS'hardware-long' +p640 +S'PCs with AMD64 or Intel 64 processors' +p641 +ss(S'image' +g339 +NS's390x-tape' +tp642 +(dp643 +S'configs' +p644 +(lp645 +S's390/config.s390x-tape' +p646 +asS'override-localversion' +p647 +S's390x' +p648 +sS'type' +p649 +S'plain-s390-tape' +p650 +sS'initramfs' +p651 +I00 +ss(g98 g67 -S'686-pae' -tp651 -(dp652 -S'parts' -p653 -(lp654 -S'xen' -p655 -ass(g107 -g47 -g109 -tp656 -(dp657 -g112 +g100 +tp652 +(dp653 +g103 I01 -sg113 -(lp658 +sg104 +(lp654 S'itanium' -p659 +p655 aS'mckinley' -p660 +p656 ass(S'description' -g178 +g302 +NS'parisc64' +tp657 +(dp658 +S'hardware' +p659 +S'64-bit PA-RISC' +p660 +ss(S'description' +g131 +NS'sparc64' tp661 (dp662 -S'part-short-tape' +S'hardware' p663 -S'IPL from tape' +S'uniprocessor 64-bit UltraSPARC' p664 -sS'part-long-tape' -p665 -S'This kernel has support to IPL (boot) from a tape.' -p666 -sS'part-long-reader' +ss(S'image' +g53 +NS'orion5x' +tp665 +(dp666 +S'check-size' p667 -S'This kernel has support to IPL (boot) from a VM reader or DASD device.' +S'1572792' p668 -ss(S'description' -g178 -NS's390-tape' -tp669 -(dp670 -S'hardware' -p671 -S'IBM S/390' -p672 -sS'parts' -p673 -(lp674 -S'tape' -p675 -ass(g107 -g40 -g109 -tp676 -(dp677 -g112 +sS'recommends' +p669 +S'uboot-mkimage' +p670 +ss(g98 +g345 +g100 +tp671 +(dp672 +g103 I01 -sg113 -(lp678 +sg104 +(lp673 S'r4k-ip22' -p679 +p674 aS'r5k-ip32' -p680 +p675 aS'sb1-bcm91250a' -p681 +p676 aS'sb1a-bcm91480b' -p682 +p677 aS'4kc-malta' -p683 +p678 aS'5kc-malta' -p684 +p679 aS'octeon' -p685 -ass(S'image' -g416 -NS'sparc64-smp' -tp686 -(dp687 -S'configs' -p688 -(lp689 -S'sparc/config.sparc64-smp' +p680 +ass(S'base' +g302 +tp681 +(dp682 +S'kernel-arch' +p683 +S'parisc' +p684 +sg123 +(lp685 +g100 +asS'compiler' +p686 +S'gcc-4.4' +p687 +ss(S'description' +g12 +g79 +S'686-pae' +tp688 +(dp689 +S'parts' p690 +(lp691 +S'xen' +p692 ass(S'description' -g108 -NS'powerpc64' -tp691 -(dp692 +g333 +NS's390' +tp693 +(dp694 S'hardware' -p693 -S'64-bit PowerPC' -p694 -ss(S'image' -g102 -tp695 -(dp696 -S'suggests' +p695 +S'IBM S/390' +p696 +sS'parts' p697 -S'vmelilo, fdutils' -p698 -sS'initramfs' +(lp698 +S'reader' p699 -I00 -ss(S'description' -g327 -NS'sh7751r' +ass(S'description' +g302 +NS'parisc' tp700 (dp701 S'hardware' p702 -S'sh7751r' +S'32-bit PA-RISC' p703 -sS'hardware-long' -p704 -S'Renesas SH7751R R2D plus board' -p705 +ss(S'build' +g53 +NS'mv78xx0' +tp704 +(dp705 +S'image-file' +p706 +S'arch/arm/boot/zImage' +p707 ss(S'description' -g40 -NS'sb1-bcm91250a' -tp706 -(dp707 +g67 +NS'itanium' +tp708 +(dp709 S'hardware' -p708 -S'BCM91250A' -p709 -sS'hardware-long' p710 -S'Broadcom BCM91250A systems (aka SWARM)' +S'Itanium' p711 -ss(S'description' -g40 -NS'octeon' +ss(S'image' +g231 tp712 (dp713 -S'hardware' +S'suggests' p714 -S'Octeon' +S'vmelilo, fdutils' p715 -sS'hardware-long' +sS'initramfs' p716 -S'Cavium Networks Octeon' -p717 -ss(S'description' -Ng391 -tp718 -(dp719 -S'part-long-rt' -p720 -S'This kernel includes the PREEMPT_RT realtime patch set.' +I00 +ss(S'image' +g60 +NS'sb1a-bcm91480b' +tp717 +(dp718 +S'configs' +p719 +(lp720 +S'mips/config.sb1a-bcm91480b' p721 -sS'parts' -p722 -(lp723 -S'rt' +ass(S'description' +g333 +tp722 +(dp723 +S'part-short-tape' p724 -asS'part-short-rt' +S'IPL from tape' p725 -S'PREEMPT_RT' +sS'part-long-tape' p726 -ss(S'description' -g102 -NS'bvme6000' -tp727 -(dp728 -S'hardware' +S'This kernel has support to IPL (boot) from a tape.' +p727 +sS'part-long-reader' +p728 +S'This kernel has support to IPL (boot) from a VM reader or DASD device.' p729 -S'BVM BVME4000 and BVME6000' -p730 -ss(S'image' -g128 -NS'ixp4xx' -tp731 -(dp732 -S'check-size' +ss(S'build' +g167 +NS'sh7751r' +tp730 +(dp731 +S'image-file' +p732 +S'arch/sh/boot/zImage' p733 -S'1441760' -p734 -ss(S'image' -g327 -tp735 -(dp736 -S'suggests' +ss(S'description' +g60 +NS'4kc-malta' +tp734 +(dp735 +S'hardware' +p736 +S'MIPS Malta' p737 -S'fdutils' +sS'hardware-long' p738 +S'MIPS Malta boards' +p739 ss(S'base' g5 -tp739 -(dp740 +tp740 +(dp741 S'kernel-arch' -p741 -S'parisc' p742 -sg148 -(lp743 -g109 -asS'compiler' -p744 -S'gcc-4.4' -p745 -ss(S'base' -g327 -tp746 -(dp747 -S'kernel-arch' +S'arm' +p743 +sg123 +(lp744 +g100 +ass(S'description' +g345 +NS'sb1-bcm91250a' +tp745 +(dp746 +S'hardware' +p747 +S'BCM91250A' p748 -S'sh' +sS'hardware-long' p749 -sg148 -(lp750 -g109 -ass(S'image' -g192 +S'Broadcom BCM91250A systems (aka SWARM)' +p750 +ss(S'image' +g167 tp751 (dp752 S'suggests' p753 -S'silo, fdutils' +S'fdutils' p754 -ss(S'description' +ss(S'image' +g333 +NS's390-tape' tp755 (dp756 -S'part-long-up' +S'override-localversion' p757 -S'This kernel is not suitable for SMP (multi-processor,\nmulti-core or hyper-threaded) systems.' +S's390' p758 -sS'part-long-xen' +sS'type' p759 -S'This kernel also runs on a Xen hypervisor.\nIt supports both privileged (dom0) and unprivileged (domU) operation.' +S'plain-s390-tape' p760 -ss(S'image' -g416 -NS'sparc64' -tp761 -(dp762 -S'configs' -p763 -(lp764 -S'sparc/config.sparc64' -p765 -ass(S'image' -g128 -NS'orion5x' -tp766 -(dp767 -S'check-size' +sS'initramfs' +p761 +I00 +ss(S'base' +NS'rt' +tp762 +(dp763 +S'enabled' +p764 +I01 +ss(S'description' +g345 +NS'r4k-ip22' +tp765 +(dp766 +S'hardware' +p767 +S'SGI IP22' p768 -S'1572792' +sS'hardware-long' p769 -sS'recommends' +S'SGI IP22 systems (Indy, Indigo2)' p770 -S'uboot-mkimage' -p771 -ss(S'description' -g55 -NS'sb1-bcm91250a' -tp772 -(dp773 -S'hardware' +ss(S'base' +g167 +tp771 +(dp772 +S'kernel-arch' +p773 +S'sh' p774 -S'BCM91250A' -p775 -sS'hardware-long' -p776 -S'Broadcom BCM91250A systems (aka SWARM)' -p777 -ss(S'image' -g416 -tp778 -(dp779 -S'suggests' -p780 -S'silo, fdutils' -p781 -sS'configs' -p782 -(lp783 -S'sparc/config' -p784 +sg123 +(lp775 +g100 ass(S'description' -g178 -NS's390' -tp785 -(dp786 +g333 +NS's390x' +tp776 +(dp777 S'hardware' -p787 -S'IBM S/390' -p788 +p778 +S'IBM zSeries' +p779 sS'parts' -p789 -(lp790 +p780 +(lp781 S'reader' -p791 -ass(S'description' -g128 -NS'iop32x' -tp792 -(dp793 +p782 +ass(S'image' +g131 +tp783 +(dp784 +S'suggests' +p785 +S'silo, fdutils' +p786 +ss(S'build' +g5 +NS'mx5' +tp787 +(dp788 +S'image-file' +p789 +S'arch/arm/boot/zImage' +p790 +ss(S'description' +g53 +NS'versatile' +tp791 +(dp792 S'hardware' +p793 +S'Versatile' p794 -S'IOP32x' -p795 sS'hardware-long' +p795 +S'Versatile systems (PB, AB, Qemu)' p796 -S'IOP32x based systems (Thecus N2100, etc)' -p797 -ss(S'image' -g192 -NS'sparc32' -tp798 -(dp799 -S'image-postproc' -p800 -S'sparc32-image-postproc' -p801 ss(S'description' -g29 -NS'powerpc-smp' -tp802 -(dp803 +g339 +NS's390x-tape' +tp797 +(dp798 S'hardware' -p804 -S'multiprocessor 32-bit PowerPC' -p805 -ss(S'base' -g29 -tp806 -(dp807 -S'kernel-arch' -p808 -S'powerpc' -p809 -sg148 -(lp810 -g109 +p799 +S'IBM zSeries' +p800 +sS'parts' +p801 +(lp802 +S'tape' +p803 ass(S'image' -g178 -NS's390x-tape' -tp811 -(dp812 -S'override-localversion' -p813 -S's390x' -p814 -sS'type' -p815 -S'plain-s390-tape' -p816 -sS'initramfs' -p817 -I00 -ss(S'build' -g161 -NS'vexpress' -tp818 -(dp819 +g60 +NS'5kc-malta' +tp804 +(dp805 +S'configs' +p806 +(lp807 +S'mips/config.5kc-malta' +p808 +ass(S'build' +g53 +NS'iop32x' +tp809 +(dp810 S'image-file' -p820 +p811 S'arch/arm/boot/zImage' -p821 +p812 ss(S'description' -g128 -NS'ixp4xx' -tp822 -(dp823 +g302 +NS'parisc64-smp' +tp813 +(dp814 S'hardware' +p815 +S'multiprocessor 64-bit PA-RISC' +p816 +ss(S'build' +g339 +NS's390x' +tp817 +(dp818 +S'debug-info' +p819 +I01 +ss(S'image' +g107 +tp820 +(dp821 +S'suggests' +p822 +S'silo, fdutils' +p823 +sS'configs' p824 -S'IXP4xx' -p825 -sS'hardware-long' +(lp825 +S'sparc/config' p826 -S'IXP4xx based systems (Linksys NSLU2, etc)' -p827 -ss(S'description' -g102 -NS'mac' -tp828 -(dp829 -S'hardware' +ass(S'base' +g86 +tp827 +(dp828 +S'kernel-arch' +p829 +S'powerpc' p830 -S'Macintosh' -p831 -ss(S'description' -g21 +sg123 +(lp831 +g100 +ass(S'description' +g345 +NS'r5k-ip32' tp832 (dp833 -S'part-short-tape' +S'hardware' p834 -S'IPL from tape' +S'SGI IP32' p835 -sS'part-long-tape' +sS'hardware-long' p836 -S'This kernel has support to IPL (boot) from a tape.' +S'SGI IP32 systems (O2)' p837 -sS'part-long-reader' -p838 -S'This kernel has support to IPL (boot) from a VM reader or DASD device.' -p839 -ss(S'image' -g161 -tp840 -(dp841 -S'suggests' -p842 -S'fdutils' +ss(S'build' +g333 +NS's390x-tape' +tp838 +(dp839 +S'modules' +p840 +I00 +ss(S'build' +g333 +NS's390x' +tp841 +(dp842 +S'debug-info' p843 -sS'configs' -p844 -(lp845 -S'armel/config' +I01 +ss(S'description' +g5 +NS'omap' +tp844 +(dp845 +S'hardware' p846 -aS'armhf/config' +S'TI OMAP3+' p847 -ass(S'description' -g47 -NS'itanium' -tp848 -(dp849 -S'hardware' -p850 -S'Itanium' -p851 +sS'hardware-long' +p848 +S'Texas Instruments OMAP3 or OMAP4 based systems' +p849 +ss(S'build' +g12 +NS'686-pae' +tp850 +(dp851 +S'debug-info' +p852 +I01 ss(S'description' -g161 -NS'vexpress' -tp852 -(dp853 +g302 +NS'parisc-smp' +tp853 +(dp854 S'hardware' -p854 -S'ARM Ltd. Versatile Express' p855 -sS'hardware-long' +S'multiprocessor 32-bit PA-RISC' p856 -S'ARM Ltd. Versatile Express family of processors' -p857 -ss(g107 -g102 -g109 -tp858 -(dp859 -g112 -I01 -sg113 -(lp860 -S'amiga' +ss(S'description' +g339 +tp857 +(dp858 +S'part-short-tape' +p859 +S'IPL from tape' +p860 +sS'part-long-tape' p861 -aS'atari' +S'This kernel has support to IPL (boot) from a tape.' p862 -aS'bvme6000' +sS'part-long-reader' p863 -aS'mac' +S'This kernel has support to IPL (boot) from a VM reader or DASD device.' p864 -aS'mvme147' -p865 -aS'mvme16x' -p866 -ass(S'description' -g66 -NS'486' -tp867 -(dp868 +ss(S'description' +g333 +NS's390x-tape' +tp865 +(dp866 S'hardware' -p869 -S'older PCs' -p870 +p867 +S'IBM zSeries' +p868 sS'parts' +p869 +(lp870 +S'tape' p871 -(lp872 -S'up' -p873 -asS'hardware-long' -p874 -S'PCs with a single processor not supporting PAE' -p875 -ss(S'description' -g161 -NS'omap' -tp876 -(dp877 -S'hardware' +ass(S'abi' +tp872 +(dp873 +S'abiname' +p874 +S'3' +ss(S'base' +g302 +NS'parisc64' +tp875 +(dp876 +S'override-host-type' +p877 +S'hppa64-linux-gnu' p878 -S'TI OMAP3+' +sS'cflags' p879 -sS'hardware-long' +S'-fno-cse-follow-jumps' p880 -S'Texas Instruments OMAP3 or OMAP4 based systems' -p881 -ss(S'description' -g128 -NS'mv78xx0' -tp882 -(dp883 -S'hardware' -p884 -S'Marvell 78xx0' +ss(S'image' +g12 +NS'amd64' +tp881 +(dp882 +S'configs' +p883 +(lp884 +S'kernelarch-x86/config-arch-64' p885 -sS'hardware-long' +asS'recommends' p886 -S'Marvell DB-78xx0-BP Development Board' +S'libc6-i686' p887 -ss(S'base' +ss(S'description' +g339 +NS's390x' tp888 (dp889 -S'arches' +S'hardware' p890 -(lp891 -S'alpha' +S'IBM zSeries' +p891 +sS'parts' p892 -aS'amd64' -p893 -aS'armel' +(lp893 +S'reader' p894 -aS'armhf' -p895 -aS'hppa' -p896 -aS'i386' -p897 -aS'ia64' +ass(g98 +g231 +g100 +tp895 +(dp896 +g103 +I01 +sg104 +(lp897 +S'amiga' p898 -aS'm68k' +aS'atari' p899 -aS'mips' +aS'bvme6000' p900 -aS'mipsel' +aS'mac' p901 -aS'powerpc' +aS'mvme147' p902 -aS'ppc64' +aS'mvme16x' p903 -aS's390' -p904 -aS's390x' -p905 -aS'sh4' +ass(S'description' +g131 +NS'sparc32' +tp904 +(dp905 +S'hardware' p906 -aS'sparc' +S'uniprocessor sparc32 (sun4m)' p907 -aS'sparc64' -p908 -asS'featuresets' -p909 -(lp910 -S'none' -p911 -aS'rt' +ss(S'base' +g12 +g79 +tp908 +(dp909 +S'flavours' +p910 +(lp911 +S'486' p912 -asS'compiler' +aS'686-pae' p913 -S'gcc-4.6' +aS'amd64' p914 -ss(S'description' -g128 -NS'versatile' +ass(S'description' +g231 +NS'mvme147' tp915 (dp916 S'hardware' p917 -S'Versatile' +S'Motorola MVME147' p918 -sS'hardware-long' -p919 -S'Versatile systems (PB, AB, Qemu)' -p920 ss(S'build' -g21 +g339 NS's390x-tape' -tp921 -(dp922 +tp919 +(dp920 S'modules' -p923 +p921 I00 -ss(S'description' -g5 -NS'parisc-smp' -tp924 -(dp925 -S'hardware' +ss(S'image' +g107 +NS'sparc64' +tp922 +(dp923 +S'configs' +p924 +(lp925 +S'sparc/config.sparc64' p926 -S'multiprocessor 32-bit PA-RISC' -p927 -ss(S'build' -g161 -NS'omap' -tp928 -(dp929 -S'image-file' +ass(S'description' +g167 +NS'sh7751r' +tp927 +(dp928 +S'hardware' +p929 +S'sh7751r' p930 -S'arch/arm/boot/zImage' +sS'hardware-long' p931 +S'Renesas SH7751R R2D plus board' +p932 +ss(S'description' +tp933 +(dp934 +S'part-long-up' +p935 +S'This kernel is not suitable for SMP (multi-processor,\nmulti-core or hyper-threaded) systems.' +p936 +sS'part-long-xen' +p937 +S'This kernel also runs on a Xen hypervisor.\nIt supports both privileged (dom0) and unprivileged (domU) operation.' +p938 ss(S'base' -g102 -tp932 -(dp933 +g231 +tp939 +(dp940 S'kernel-arch' -p934 +p941 S'm68k' -p935 -sg148 -(lp936 -g109 +p942 +sg123 +(lp943 +g100 asS'cflags' -p937 +p944 S'-ffreestanding' -p938 +p945 sS'compiler' -p939 +p946 S'gcc-4.6' -p940 +p947 ss(S'description' -g327 -NS'sh7785lcr' -tp941 -(dp942 +g60 +NS'loongson-2f' +tp948 +(dp949 S'hardware' -p943 -S'sh7785lcr' -p944 -sS'hardware-long' -p945 -S'Renesas SH7785 reference board' -p946 -ss(S'image' -tp947 -(dp948 -S'initramfs-generators' -p949 -(lp950 -S'initramfs-tools' +p950 +S'Loongson 2F' p951 -aS'initramfs-fallback' +sS'hardware-long' p952 -asS'type' +S'Lemote Loongson 2F systems' p953 -S'plain' -p954 -ss(S'image' -g108 -NS'powerpc64' -tp955 -(dp956 -S'configs' +ss(S'description' +g60 +NS'sb1a-bcm91480b' +tp954 +(dp955 +S'hardware' +p956 +S'BCM91480B' p957 -(lp958 -S'powerpc/config.powerpc64' +sS'hardware-long' +p958 +S'Broadcom BCM91480B systems (aka BigSur)' p959 -ass(S'image' -g66 -NS'686-pae' +ss(S'description' +g231 +NS'mvme16x' tp960 (dp961 -S'configs' +S'hardware' p962 -(lp963 -S'kernelarch-x86/config-arch-32' -p964 -asS'recommends' -p965 -S'libc6-i686' -p966 -ss(S'image' -g55 -NS'5kc-malta' -tp967 -(dp968 -S'configs' -p969 -(lp970 -S'mips/config.5kc-malta' -p971 +S'Motorola MVME162/6/7, MVME172/7' +p963 +ss(g98 +g107 +g100 +tp964 +(dp965 +g103 +I01 +sg104 +(lp966 +S'sparc64' +p967 +aS'sparc64-smp' +p968 ass(S'description' -g192 -NS'sparc32' -tp972 -(dp973 +g231 +NS'mac' +tp969 +(dp970 +S'hardware' +p971 +S'Macintosh' +p972 +ss(S'description' +g345 +NS'octeon' +tp973 +(dp974 S'hardware' -p974 -S'uniprocessor sparc32 (sun4m)' p975 -ss(S'image' -g21 -NS's390x' -tp976 -(dp977 -S'configs' +S'Octeon' +p976 +sS'hardware-long' +p977 +S'Cavium Networks Octeon' p978 -(lp979 -S's390/config.s390x' -p980 -ass(g107 -g416 -g109 -tp981 -(dp982 -g112 -I01 -sg113 -(lp983 -S'sparc64' -p984 -aS'sparc64-smp' -p985 -ass(S'image' -g5 -tp986 -(dp987 -S'suggests' -p988 -S'palo' -p989 +ss(S'description' +g231 +NS'bvme6000' +tp979 +(dp980 +S'hardware' +p981 +S'BVM BVME4000 and BVME6000' +p982 ss(S'build' -g327 +g167 NS'sh7785lcr' -tp990 -(dp991 +tp983 +(dp984 S'image-file' -p992 +p985 S'arch/sh/boot/zImage' -p993 -ss(S'abi' -tp994 -(dp995 -S'abiname' -p996 -S'3' +p986 ss(S'description' -g178 -NS's390x-tape' -tp997 -(dp998 +g99 +NS'powerpc64' +tp987 +(dp988 S'hardware' -p999 -S'IBM zSeries' +p989 +S'64-bit PowerPC' +p990 +ss(S'image' +g333 +NS's390x-tape' +tp991 +(dp992 +S'override-localversion' +p993 +S's390x' +p994 +sS'type' +p995 +S'plain-s390-tape' +p996 +sS'initramfs' +p997 +I00 +ss(S'image' +g167 +NS'sh7785lcr' +tp998 +(dp999 +S'check-size' p1000 -sS'parts' +S'4194304' p1001 -(lp1002 -S'tape' +sS'recommends' +p1002 +S'uboot-mkimage' p1003 -ass(S'description' -g416 -NS'sparc64' +ss(S'image' +g339 tp1004 (dp1005 -S'hardware' -p1006 -S'uniprocessor 64-bit UltraSPARC' -p1007 -ss(S'image' -g21 -tp1008 -(dp1009 S'configs' -p1010 -(lp1011 +p1006 +(lp1007 S's390/config' -p1012 +p1008 asS'bootloaders' -p1013 -(lp1014 +p1009 +(lp1010 S's390-tools' +p1011 +ass(S'image' +g53 +NS'iop32x' +tp1012 +(dp1013 +S'check-size' +p1014 +S'1441784' p1015 -ass(S'build' -g327 -NS'sh7751r' +ss(S'build' +g53 +NS'orion5x' tp1016 (dp1017 S'image-file' p1018 -S'arch/sh/boot/zImage' +S'arch/arm/boot/zImage' p1019 ss(S'description' -g102 -NS'amiga' +g12 +NS'amd64' tp1020 (dp1021 S'hardware' p1022 -S'Amiga' +S'64-bit PCs' p1023 +sS'hardware-long' +p1024 +S'PCs with AMD64 or Intel 64 processors' +p1025 +ss(S'description' +g86 +NS'powerpc64' +tp1026 +(dp1027 +S'hardware' +p1028 +S'64-bit PowerPC' +p1029 ss(S'image' -g128 -NS'iop32x' -tp1024 -(dp1025 +g53 +NS'ixp4xx' +tp1030 +(dp1031 S'check-size' -p1026 -S'1441784' -p1027 -sstRp1028 +p1032 +S'1441760' +p1033 +ss(S'image' +g12 +NS'686-pae' +tp1034 +(dp1035 +S'configs' +p1036 +(lp1037 +S'kernelarch-x86/config-arch-32' +p1038 +asS'recommends' +p1039 +S'libc6-i686' +p1040 +ss(S'description' +g345 +NS'4kc-malta' +tp1041 +(dp1042 +S'hardware' +p1043 +S'MIPS Malta' +p1044 +sS'hardware-long' +p1045 +S'MIPS Malta boards' +p1046 +sstRp1047 . \ No newline at end of file diff -Nru linux-3.2.21/debian/control linux-3.2.21/debian/control --- linux-3.2.21/debian/control 2012-06-22 13:54:27.000000000 +0100 +++ linux-3.2.21/debian/control 2012-06-24 23:21:09.000000000 +0100 @@ -2682,406 +2682,288 @@ Package: linux-headers-3.2.0-3-all-armhf Architecture: armhf -Depends: ${misc:Depends}, linux-headers-3.2.0-3-mx5 (= ${binary:Version}), linux-headers-3.2.0-3-omap (= ${binary:Version}), linux-headers-3.2.0-3-vexpress (= ${binary:Version}) +Depends: ${misc:Depends}, linux-headers-3.2.0-3-rpi (= ${binary:Version}) Description: All header files for Linux 3.2 (meta-package) This package depends against all architecture-specific kernel header files for Linux kernel version 3.2, generally used for building out-of-tree kernel modules. -Package: kernel-image-3.2.0-3-mx5-di +Package: kernel-image-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra -Provides: kernel-image, rtc-modules +Provides: kernel-image Description: Linux kernel binary image for the Debian installer This package contains the kernel image for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: nic-modules-3.2.0-3-mx5-di +Package: nic-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: nic-modules -Depends: kernel-image-3.2.0-3-mx5-di, nic-shared-modules-3.2.0-3-mx5-di, core-modules-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: Common NIC drivers This package contains common NIC drivers for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: nic-shared-modules-3.2.0-3-mx5-di -Architecture: armhf -Section: debian-installer -Priority: standard -Provides: nic-shared-modules -Depends: kernel-image-3.2.0-3-mx5-di -Description: Shared NIC drivers - This package contains NIC drivers needed by combinations of nic-modules, - nic-extra-modules, nic-pcmcia-modules, and nic-wireless-modules. -XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 - -Package: scsi-core-modules-3.2.0-3-mx5-di +Package: scsi-core-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: loop-modules-3.2.0-3-mx5-di +Package: loop-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: loop-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: Loopback filesystem support This package contains loopback filesystem support for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: ipv6-modules-3.2.0-3-mx5-di -Architecture: armhf -Section: debian-installer -Priority: extra -Provides: ipv6-modules -Depends: kernel-image-3.2.0-3-mx5-di -Description: IPv6 driver - This package contains the IPv6 driver for the kernel. -XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 - -Package: btrfs-modules-3.2.0-3-mx5-di +Package: btrfs-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-3.2.0-3-mx5-di, core-modules-3.2.0-3-mx5-di, crc-modules-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di, crc-modules-3.2.0-3-rpi-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: ext2-modules-3.2.0-3-mx5-di +Package: ext2-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: ext2-modules -Depends: kernel-image-3.2.0-3-mx5-di, core-modules-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: EXT2 filesystem support This package contains the EXT2 filesystem module for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: ext3-modules-3.2.0-3-mx5-di +Package: ext3-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: ext3-modules -Depends: kernel-image-3.2.0-3-mx5-di, core-modules-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: ext4-modules-3.2.0-3-mx5-di -Architecture: armhf -Section: debian-installer -Priority: standard -Provides: ext4-modules -Depends: kernel-image-3.2.0-3-mx5-di, core-modules-3.2.0-3-mx5-di -Description: EXT4 filesystem support - This package contains the EXT4 filesystem module for the kernel. -XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 - -Package: isofs-modules-3.2.0-3-mx5-di +Package: isofs-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: jfs-modules-3.2.0-3-mx5-di +Package: jfs-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: jfs-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: JFS filesystem support This package contains the JFS filesystem module for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: reiserfs-modules-3.2.0-3-mx5-di +Package: reiserfs-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: reiserfs-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: Reiser filesystem support This package contains the Reiser filesystem module for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: fat-modules-3.2.0-3-mx5-di +Package: fat-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: fat-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: minix-modules-3.2.0-3-mx5-di +Package: minix-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: minix-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: Minix filesystem support This package contains the Minix filesystem module for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: md-modules-3.2.0-3-mx5-di +Package: md-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: multipath-modules-3.2.0-3-mx5-di +Package: multipath-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-3.2.0-3-mx5-di, md-modules-3.2.0-3-mx5-di, scsi-core-modules-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di, md-modules-3.2.0-3-rpi-di, scsi-core-modules-3.2.0-3-rpi-di Description: Multipath support This package contains DM-Multipath modules for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: usb-storage-modules-3.2.0-3-mx5-di +Package: usb-storage-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-3.2.0-3-mx5-di, scsi-core-modules-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di, scsi-core-modules-3.2.0-3-rpi-di Description: USB storage support This package contains the USB storage driver for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: input-modules-3.2.0-3-mx5-di +Package: input-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: Input devices support This package contains input device drivers for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: nic-usb-modules-3.2.0-3-mx5-di +Package: nic-usb-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: standard Provides: nic-usb-modules -Depends: kernel-image-3.2.0-3-mx5-di, nic-shared-modules-3.2.0-3-mx5-di, core-modules-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: USB NIC drivers This package contains USB network adapter drivers for the kernel. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 - -Package: core-modules-3.2.0-3-mx5-di -Architecture: armhf -Section: debian-installer -Priority: standard -Provides: core-modules -Depends: kernel-image-3.2.0-3-mx5-di -Description: Core modules - This package contains core modules for the kernel, that will almost - always be needed. -XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: crc-modules-3.2.0-3-mx5-di +Package: crc-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: CRC modules This package contains CRC support modules. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: crypto-modules-3.2.0-3-mx5-di +Package: crypto-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: crypto modules This package contains crypto modules. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: crypto-dm-modules-3.2.0-3-mx5-di +Package: crypto-dm-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-3.2.0-3-mx5-di, md-modules-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di, md-modules-3.2.0-3-rpi-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 - -Package: mmc-modules-3.2.0-3-mx5-di -Architecture: armhf -Section: debian-installer -Priority: extra -Provides: mmc-modules -Depends: kernel-image-3.2.0-3-mx5-di, core-modules-3.2.0-3-mx5-di -Description: MMC/SD card modules - This package contains modules needed to support MMC (multimedia) and SD - cards. -XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: nbd-modules-3.2.0-3-mx5-di +Package: nbd-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: squashfs-modules-3.2.0-3-mx5-di +Package: squashfs-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: squashfs modules This package contains squashfs modules. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: uinput-modules-3.2.0-3-mx5-di +Package: uinput-modules-3.2.0-3-rpi-di Architecture: armhf Section: debian-installer Priority: extra Provides: uinput-modules -Depends: kernel-image-3.2.0-3-mx5-di +Depends: kernel-image-3.2.0-3-rpi-di Description: uinput support This package contains the uinput module. XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 +XB-Kernel-Version: 3.2.0-3-rpi -Package: udf-modules-3.2.0-3-mx5-di +Package: linux-image-3.2.0-3-rpi Architecture: armhf -Section: debian-installer -Priority: extra -Provides: udf-modules -Depends: kernel-image-3.2.0-3-mx5-di, crc-modules-3.2.0-3-mx5-di -Description: UDF modules - This package contains the UDF filesystem module. -XC-Package-Type: udeb -XB-Kernel-Version: 3.2.0-3-mx5 - -Package: linux-image-3.2.0-3-mx5 -Architecture: armhf -Provides: linux-image, linux-modules-3.2.0-3-mx5 +Provides: linux-image, linux-modules-3.2.0-3-rpi Pre-Depends: debconf | debconf-2.0 -Depends: kmod | module-init-tools, linux-base (>= 3~), ${misc:Depends}, initramfs-tools (>= 0.99~) [armhf] | linux-initramfs-tool [armhf] +Depends: kmod | module-init-tools, linux-base (>= 3~), ${misc:Depends} Recommends: firmware-linux-free (>= 3~) Suggests: linux-doc-3.2, fdutils [armhf] -Breaks: at (<< 3.1.12-1+squeeze1), initramfs-tools (<< 0.99~) -Description: Linux 3.2 for Freescale i.MX51 - The Linux kernel 3.2 and modules for use on Support for Freescale i.MX51 - family of processors. +Breaks: at (<< 3.1.12-1+squeeze1) +Description: Linux 3.2 for Raspberry pi + The Linux kernel 3.2 and modules for use on Raspberry pi. -Package: linux-headers-3.2.0-3-mx5 +Package: linux-headers-3.2.0-3-rpi Architecture: armhf Provides: linux-headers Depends: linux-headers-3.2.0-3-common (= ${binary:Version}), linux-kbuild-3.2, ${misc:Depends}, gcc-4.6 -Description: Header files for Linux 3.2.0-3-mx5 +Description: Header files for Linux 3.2.0-3-rpi This package provides the architecture-specific kernel header files for - Linux kernel 3.2.0-3-mx5, generally used for building out-of-tree kernel + Linux kernel 3.2.0-3-rpi, generally used for building out-of-tree kernel modules. These files are going to be installed into - /usr/src/linux-headers-3.2.0-3-mx5, and can be used for building modules - that load into the kernel provided by the linux-image-3.2.0-3-mx5 package. - -Package: linux-image-3.2.0-3-omap -Architecture: armhf -Provides: linux-image, linux-modules-3.2.0-3-omap -Pre-Depends: debconf | debconf-2.0 -Depends: kmod | module-init-tools, linux-base (>= 3~), ${misc:Depends}, initramfs-tools (>= 0.99~) [armhf] | linux-initramfs-tool [armhf] -Recommends: firmware-linux-free (>= 3~), uboot-mkimage [armhf] -Suggests: linux-doc-3.2, fdutils [armhf] -Breaks: at (<< 3.1.12-1+squeeze1), initramfs-tools (<< 0.99~) -Description: Linux 3.2 for TI OMAP3+ - The Linux kernel 3.2 and modules for use on Texas Instruments OMAP3 or - OMAP4 based systems. - -Package: linux-headers-3.2.0-3-omap -Architecture: armhf -Provides: linux-headers -Depends: linux-headers-3.2.0-3-common (= ${binary:Version}), linux-kbuild-3.2, ${misc:Depends}, gcc-4.6 -Description: Header files for Linux 3.2.0-3-omap - This package provides the architecture-specific kernel header files for - Linux kernel 3.2.0-3-omap, generally used for building out-of-tree kernel - modules. These files are going to be installed into - /usr/src/linux-headers-3.2.0-3-omap, and can be used for building modules - that load into the kernel provided by the linux-image-3.2.0-3-omap - package. - -Package: linux-image-3.2.0-3-vexpress -Architecture: armhf -Provides: linux-image, linux-modules-3.2.0-3-vexpress -Pre-Depends: debconf | debconf-2.0 -Depends: kmod | module-init-tools, linux-base (>= 3~), ${misc:Depends}, initramfs-tools (>= 0.99~) [armhf] | linux-initramfs-tool [armhf] -Recommends: firmware-linux-free (>= 3~) -Suggests: linux-doc-3.2, fdutils [armhf] -Breaks: at (<< 3.1.12-1+squeeze1), initramfs-tools (<< 0.99~) -Description: Linux 3.2 for ARM Ltd. Versatile Express - The Linux kernel 3.2 and modules for use on ARM Ltd. Versatile Express - family of processors. - -Package: linux-headers-3.2.0-3-vexpress -Architecture: armhf -Provides: linux-headers -Depends: linux-headers-3.2.0-3-common (= ${binary:Version}), linux-kbuild-3.2, ${misc:Depends}, gcc-4.6 -Description: Header files for Linux 3.2.0-3-vexpress - This package provides the architecture-specific kernel header files for - Linux kernel 3.2.0-3-vexpress, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-3.2.0-3-vexpress, and can be used for building - modules that load into the kernel provided by the - linux-image-3.2.0-3-vexpress package. + /usr/src/linux-headers-3.2.0-3-rpi, and can be used for building modules + that load into the kernel provided by the linux-image-3.2.0-3-rpi package. Package: linux-headers-3.2.0-3-all-hppa Architecture: hppa diff -Nru linux-3.2.21/debian/control.md5sum linux-3.2.21/debian/control.md5sum --- linux-3.2.21/debian/control.md5sum 2012-06-22 13:54:27.000000000 +0100 +++ linux-3.2.21/debian/control.md5sum 2012-06-24 23:21:09.000000000 +0100 @@ -1,5 +1,5 @@ f340f5238a20580b3abbb277c65ccbd4 debian/bin/gencontrol.py -85e12a64885fe350d076e8520097198a debian/changelog +51efa02abcc10251e971192e32ded579 debian/changelog d253b8a3cc1ffc2054b1d485facc490a debian/templates/control.headers.arch.in d60e1ee86882c530ea74bfbb684a506e debian/templates/control.headers.featureset.in 3a8040742dfc77adae08116a336e98c3 debian/templates/control.headers.in @@ -15,7 +15,7 @@ 2aadec33687e2fb0e60f8bd776344625 debian/config/alpha/defines cd9053a6377dbb5acb9bc4e463d3cab2 debian/config/amd64/defines 159a7bc773dbd2714d6fe996f03b257d debian/config/armel/defines -566f46c44cf99931743dce05d61af063 debian/config/armhf/defines +64cac20c05a9142303597bc20caa3be1 debian/config/armhf/defines 366b94d652a66b437eabcd165bcc9610 debian/config/featureset-rt/defines 7663688e373ff5b5857c15e69a7c1d3e debian/config/hppa/defines 7f619d82e1b95e860db369aba7ed7e4b debian/config/i386/defines @@ -36,7 +36,7 @@ 7146ff53fc4f9fbb49948225d8589b69 debian/config/i386/rt/defines 7ecaa8334419297fe6715afadae794c6 debian/installer/amd64/kernel-versions 07c9cbe632c22b1a4d696e305a43dd79 debian/installer/armel/kernel-versions -61a308156c33384c37b66a30a0084e3c debian/installer/armhf/kernel-versions +a3a7c83c8a8d50314dc8f43023ecb21d debian/installer/armhf/kernel-versions fb5fd18c89403e59d2df08c6b261ba87 debian/installer/hppa/kernel-versions 967797430d58c1aeecac819cd6c23bd8 debian/installer/i386/kernel-versions 3003a272236f91494508a5f7e9c9b467 debian/installer/ia64/kernel-versions diff -Nru linux-3.2.21/debian/installer/armhf/kernel-versions linux-3.2.21/debian/installer/armhf/kernel-versions --- linux-3.2.21/debian/installer/armhf/kernel-versions 2012-06-03 16:54:26.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/kernel-versions 2012-06-23 23:11:01.000000000 +0100 @@ -1,2 +1,2 @@ # arch version flavour installedname suffix build-depends -armhf - mx5 - y - +armhf - rpi - y - diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/btrfs-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/btrfs-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/btrfs-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/btrfs-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crc-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crc-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crc-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crc-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +crc-ccitt diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crypto-dm-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crypto-dm-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crypto-dm-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crypto-dm-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crypto-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crypto-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crypto-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/crypto-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/ext2-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/ext2-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/ext2-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/ext2-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/ext3-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/ext3-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/ext3-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/ext3-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/fat-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/fat-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/fat-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/fat-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/input-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/input-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/input-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/input-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1,4 @@ +#include +usbhid - +usbmouse - +usbkbd - diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/isofs-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/isofs-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/isofs-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/isofs-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/jfs-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/jfs-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/jfs-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/jfs-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/kernel-image linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/kernel-image --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/kernel-image 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/kernel-image 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +# empty diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/loop-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/loop-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/loop-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/loop-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/md-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/md-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/md-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/md-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/minix-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/minix-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/minix-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/minix-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/multipath-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/multipath-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/multipath-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/multipath-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nbd-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nbd-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nbd-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nbd-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nic-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nic-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nic-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nic-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1,3 @@ +inet_lro - +asix ? +rt2800usb diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nic-usb-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nic-usb-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nic-usb-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/nic-usb-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/reiserfs-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/reiserfs-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/reiserfs-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/reiserfs-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/scsi-core-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/scsi-core-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/scsi-core-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/scsi-core-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1,3 @@ +#include +scsi_mod - +sd_mod - diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/squashfs-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/squashfs-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/squashfs-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/squashfs-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/uinput-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/uinput-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/uinput-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/uinput-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1 @@ +#include diff -Nru linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/usb-storage-modules linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/usb-storage-modules --- linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/usb-storage-modules 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/installer/armhf/modules/armhf-rpi/usb-storage-modules 2012-06-23 23:11:01.000000000 +0100 @@ -0,0 +1,2 @@ +#include +usb-storage - diff -Nru linux-3.2.21/debian/patches/rpi-bootc-20120624.patch linux-3.2.21/debian/patches/rpi-bootc-20120624.patch --- linux-3.2.21/debian/patches/rpi-bootc-20120624.patch 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.21/debian/patches/rpi-bootc-20120624.patch 2012-06-24 00:56:51.000000000 +0100 @@ -0,0 +1,76517 @@ +diff -urN upstream-3.2.21/arch/arm/configs/bcmrpi_cutdown_defconfig bootc-3.2.21/arch/arm/configs/bcmrpi_cutdown_defconfig +--- upstream-3.2.21/arch/arm/configs/bcmrpi_cutdown_defconfig 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/configs/bcmrpi_cutdown_defconfig 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,494 @@ ++CONFIG_EXPERIMENTAL=y ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++# CONFIG_UID16 is not set ++# CONFIG_KALLSYMS is not set ++CONFIG_EMBEDDED=y ++# CONFIG_VM_EVENT_COUNTERS is not set ++# CONFIG_COMPAT_BRK is not set ++CONFIG_SLAB=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++# CONFIG_BLK_DEV_BSG is not set ++CONFIG_ARCH_BCM2708=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_AEABI=y ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait" ++CONFIG_CPU_IDLE=y ++CONFIG_VFP=y ++CONFIG_BINFMT_MISC=m ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_SYN_COOKIES=y ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_LRO is not set ++# CONFIG_INET_DIAG is not set ++# CONFIG_IPV6 is not set ++CONFIG_NET_PKTGEN=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_L2CAP=y ++CONFIG_BT_SCO=y ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_CFG80211=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_RC_PID=y ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_NFC_PN533=m ++CONFIG_DEVTMPFS=y ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_MISC_DEVICES=y ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_BLK_DEV_SR=m ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_LOWLEVEL is not set ++CONFIG_NETDEVICES=y ++CONFIG_TUN=m ++CONFIG_PHYLIB=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_NET_ETHERNET=y ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_AT76C50X_USB=m ++CONFIG_USB_ZD1201=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_RTL8187=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_ATH_COMMON=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_B43=m ++CONFIG_B43LEGACY=m ++CONFIG_HOSTAP=m ++CONFIG_IWM=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RTL8192CU=m ++CONFIG_WL1251=m ++CONFIG_WL12XX_MENU=m ++CONFIG_ZD1211RW=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_KC2190=y ++# CONFIG_USB_NET_ZAURUS is not set ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_PPP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_NETCONSOLE=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_VT_HW_CONSOLE_BINDING=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++# CONFIG_HW_RANDOM is not set ++CONFIG_RAW_DRIVER=y ++CONFIG_GPIO_SYSFS=y ++# CONFIG_HWMON is not set ++CONFIG_WATCHDOG=y ++CONFIG_BCM2708_WDT=m ++# CONFIG_MFD_SUPPORT is not set ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_BCM2835=m ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_QUANTA=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_UAS=y ++CONFIG_USB_LIBUSUAL=y ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_FUNSOFT=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_MOTOROLA=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_HP4X=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIEMENS_MPI=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m ++CONFIG_USB_SERIAL_ZIO=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_LED=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_MMC=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SDHCI_BCM2708=y ++CONFIG_MMC_SDHCI_BCM2708_DMA=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=m ++CONFIG_LEDS_TRIGGER_HEARTBEAT=m ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m ++CONFIG_UIO=m ++CONFIG_UIO_PDRV=m ++CONFIG_UIO_PDRV_GENIRQ=m ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_FSCACHE=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_CONFIGFS_FS=y ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_9P_FS=m ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_EFI_PARTITION=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_NLS_UTF8=m ++# CONFIG_SCHED_DEBUG is not set ++# CONFIG_DEBUG_BUGVERBOSE is not set ++# CONFIG_FTRACE is not set ++# CONFIG_ARM_UNWIND is not set ++CONFIG_CRYPTO_AUTHENC=m ++CONFIG_CRYPTO_SEQIV=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_HMAC=y ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++CONFIG_CRYPTO_SHA256=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_DEFLATE=m ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++# CONFIG_CRYPTO_HW is not set ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y +diff -urN upstream-3.2.21/arch/arm/configs/bcmrpi_defconfig bootc-3.2.21/arch/arm/configs/bcmrpi_defconfig +--- upstream-3.2.21/arch/arm/configs/bcmrpi_defconfig 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/configs/bcmrpi_defconfig 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,530 @@ ++CONFIG_EXPERIMENTAL=y ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_FHANDLE=y ++CONFIG_AUDIT=y ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_RESOURCE_COUNTERS=y ++CONFIG_BLK_CGROUP=y ++CONFIG_NAMESPACES=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_EMBEDDED=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_SLAB=y ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++# CONFIG_BLK_DEV_BSG is not set ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_CFQ_GROUP_IOSCHED=y ++CONFIG_ARCH_BCM2708=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_AEABI=y ++CONFIG_SECCOMP=y ++CONFIG_CC_STACKPROTECTOR=y ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait" ++CONFIG_KEXEC=y ++CONFIG_CPU_IDLE=y ++CONFIG_VFP=y ++CONFIG_BINFMT_MISC=m ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_SYN_COOKIES=y ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_LRO is not set ++# CONFIG_INET_DIAG is not set ++# CONFIG_IPV6 is not set ++CONFIG_NET_PKTGEN=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_L2CAP=y ++CONFIG_BT_SCO=y ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_CFG80211=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_RC_PID=y ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_NFC_PN533=m ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_MISC_DEVICES=y ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_BLK_DEV_SR=m ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_LOWLEVEL is not set ++CONFIG_MD=y ++CONFIG_NETDEVICES=y ++CONFIG_TUN=m ++CONFIG_PHYLIB=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_NET_ETHERNET=y ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_AT76C50X_USB=m ++CONFIG_USB_ZD1201=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_RTL8187=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_ATH_COMMON=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_B43=m ++CONFIG_B43LEGACY=m ++CONFIG_HOSTAP=m ++CONFIG_IWM=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RTL8192CU=m ++CONFIG_WL1251=m ++CONFIG_WL12XX_MENU=m ++CONFIG_ZD1211RW=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_KC2190=y ++# CONFIG_USB_NET_ZAURUS is not set ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_PPP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_NETCONSOLE=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_VT_HW_CONSOLE_BINDING=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++# CONFIG_HW_RANDOM is not set ++CONFIG_RAW_DRIVER=y ++CONFIG_GPIO_SYSFS=y ++# CONFIG_HWMON is not set ++CONFIG_WATCHDOG=y ++CONFIG_BCM2708_WDT=m ++# CONFIG_MFD_SUPPORT is not set ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_BCM2835=m ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_QUANTA=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_UAS=y ++CONFIG_USB_LIBUSUAL=y ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_FUNSOFT=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_MOTOROLA=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_HP4X=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIEMENS_MPI=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m ++CONFIG_USB_SERIAL_ZIO=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_LED=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_MMC=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SDHCI_BCM2708=y ++CONFIG_MMC_SDHCI_BCM2708_DMA=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=m ++CONFIG_LEDS_TRIGGER_HEARTBEAT=m ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m ++CONFIG_UIO=m ++CONFIG_UIO_PDRV=m ++CONFIG_UIO_PDRV_GENIRQ=m ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_JFS_STATISTICS=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_FANOTIFY=y ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_FSCACHE=y ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_HISTOGRAM=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_CONFIGFS_FS=y ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_9P_FS=m ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_EFI_PARTITION=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_NLS_UTF8=m ++CONFIG_PRINTK_TIME=y ++CONFIG_DETECT_HUNG_TASK=y ++CONFIG_TIMER_STATS=y ++CONFIG_DEBUG_STACK_USAGE=y ++CONFIG_DEBUG_INFO=y ++CONFIG_DEBUG_MEMORY_INIT=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_LATENCYTOP=y ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_IRQSOFF_TRACER=y ++CONFIG_SCHED_TRACER=y ++CONFIG_STACK_TRACER=y ++CONFIG_BLK_DEV_IO_TRACE=y ++CONFIG_FUNCTION_PROFILER=y ++CONFIG_KGDB=y ++CONFIG_KGDB_KDB=y ++CONFIG_KDB_KEYBOARD=y ++CONFIG_STRICT_DEVMEM=y ++CONFIG_CRYPTO_AUTHENC=m ++CONFIG_CRYPTO_SEQIV=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_HMAC=y ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++CONFIG_CRYPTO_SHA256=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_DEFLATE=m ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++# CONFIG_CRYPTO_HW is not set ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y +diff -urN upstream-3.2.21/arch/arm/configs/bcmrpi_emergency_defconfig bootc-3.2.21/arch/arm/configs/bcmrpi_emergency_defconfig +--- upstream-3.2.21/arch/arm/configs/bcmrpi_emergency_defconfig 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/configs/bcmrpi_emergency_defconfig 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,532 @@ ++CONFIG_EXPERIMENTAL=y ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_FHANDLE=y ++CONFIG_AUDIT=y ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="../target_fs" ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_RESOURCE_COUNTERS=y ++CONFIG_BLK_CGROUP=y ++CONFIG_NAMESPACES=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_EMBEDDED=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_SLAB=y ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++# CONFIG_BLK_DEV_BSG is not set ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_CFQ_GROUP_IOSCHED=y ++CONFIG_ARCH_BCM2708=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_AEABI=y ++CONFIG_SECCOMP=y ++CONFIG_CC_STACKPROTECTOR=y ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait" ++CONFIG_KEXEC=y ++CONFIG_CPU_IDLE=y ++CONFIG_VFP=y ++CONFIG_BINFMT_MISC=m ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_SYN_COOKIES=y ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_LRO is not set ++# CONFIG_INET_DIAG is not set ++# CONFIG_IPV6 is not set ++CONFIG_NET_PKTGEN=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_L2CAP=y ++CONFIG_BT_SCO=y ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_CFG80211=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_RC_PID=y ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_NFC_PN533=m ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_MISC_DEVICES=y ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_BLK_DEV_SR=m ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_LOWLEVEL is not set ++CONFIG_MD=y ++CONFIG_NETDEVICES=y ++CONFIG_TUN=m ++CONFIG_PHYLIB=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_NET_ETHERNET=y ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_AT76C50X_USB=m ++CONFIG_USB_ZD1201=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_RTL8187=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_ATH_COMMON=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_B43=m ++CONFIG_B43LEGACY=m ++CONFIG_HOSTAP=m ++CONFIG_IWM=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RTL8192CU=m ++CONFIG_WL1251=m ++CONFIG_WL12XX_MENU=m ++CONFIG_ZD1211RW=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_KC2190=y ++# CONFIG_USB_NET_ZAURUS is not set ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_PPP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_NETCONSOLE=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_VT_HW_CONSOLE_BINDING=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++# CONFIG_HW_RANDOM is not set ++CONFIG_RAW_DRIVER=y ++CONFIG_GPIO_SYSFS=y ++# CONFIG_HWMON is not set ++CONFIG_WATCHDOG=y ++CONFIG_BCM2708_WDT=m ++# CONFIG_MFD_SUPPORT is not set ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_BCM2835=m ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_QUANTA=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_UAS=y ++CONFIG_USB_LIBUSUAL=y ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_FUNSOFT=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_MOTOROLA=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_HP4X=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIEMENS_MPI=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m ++CONFIG_USB_SERIAL_ZIO=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_LED=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_MMC=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SDHCI_BCM2708=y ++CONFIG_MMC_SDHCI_BCM2708_DMA=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=m ++CONFIG_LEDS_TRIGGER_HEARTBEAT=m ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m ++CONFIG_UIO=m ++CONFIG_UIO_PDRV=m ++CONFIG_UIO_PDRV_GENIRQ=m ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_JFS_STATISTICS=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_FANOTIFY=y ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_FSCACHE=y ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_HISTOGRAM=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_CONFIGFS_FS=y ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_9P_FS=m ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_EFI_PARTITION=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_NLS_UTF8=m ++CONFIG_PRINTK_TIME=y ++CONFIG_DETECT_HUNG_TASK=y ++CONFIG_TIMER_STATS=y ++CONFIG_DEBUG_STACK_USAGE=y ++CONFIG_DEBUG_INFO=y ++CONFIG_DEBUG_MEMORY_INIT=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_LATENCYTOP=y ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_IRQSOFF_TRACER=y ++CONFIG_SCHED_TRACER=y ++CONFIG_STACK_TRACER=y ++CONFIG_BLK_DEV_IO_TRACE=y ++CONFIG_FUNCTION_PROFILER=y ++CONFIG_KGDB=y ++CONFIG_KGDB_KDB=y ++CONFIG_KDB_KEYBOARD=y ++CONFIG_STRICT_DEVMEM=y ++CONFIG_CRYPTO_AUTHENC=m ++CONFIG_CRYPTO_SEQIV=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_HMAC=y ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++CONFIG_CRYPTO_SHA256=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_DEFLATE=m ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++# CONFIG_CRYPTO_HW is not set ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y +diff -urN upstream-3.2.21/arch/arm/Kconfig bootc-3.2.21/arch/arm/Kconfig +--- upstream-3.2.21/arch/arm/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/arch/arm/Kconfig 2012-06-23 23:51:28.000000000 +0000 +@@ -955,6 +955,21 @@ + help + Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). + ++config ARCH_BCM2708 ++ bool "Broadcom BCM2708 family" ++ select CPU_V6 ++ select ARM_AMBA ++ select HAVE_CLK ++ select HAVE_SCHED_CLOCK ++ select NEED_MACH_MEMORY_H ++ select CLKDEV_LOOKUP ++ select GENERIC_CLOCKEVENTS ++ select ARM_ERRATA_411920 ++ select MACH_BCM2708 ++ select VC4 ++ help ++ This enables support for Broadcom BCM2708 boards. ++ + config ARCH_VT8500 + bool "VIA/WonderMedia 85xx" + select CPU_ARM926T +@@ -1098,6 +1113,7 @@ + source "arch/arm/mach-vt8500/Kconfig" + + source "arch/arm/mach-w90x900/Kconfig" ++source "arch/arm/mach-bcm2708/Kconfig" + + # Definitions to make life easier + config ARCH_ACORN +diff -urN upstream-3.2.21/arch/arm/Kconfig.debug bootc-3.2.21/arch/arm/Kconfig.debug +--- upstream-3.2.21/arch/arm/Kconfig.debug 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/arch/arm/Kconfig.debug 2012-06-23 23:51:28.000000000 +0000 +@@ -247,6 +247,14 @@ + their output to the standard serial port on the RealView + PB1176 platform. + ++ config DEBUG_BCM2708_UART0 ++ bool "Broadcom BCM2708 UART0 (PL011)" ++ depends on MACH_BCM2708 ++ help ++ Say Y here if you want the debug print routines to direct ++ their output to UART 0. The port must have been initialised ++ by the boot-loader before use. ++ + endchoice + + config EARLY_PRINTK +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/armctrl.c bootc-3.2.21/arch/arm/mach-bcm2708/armctrl.c +--- upstream-3.2.21/arch/arm/mach-bcm2708/armctrl.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/armctrl.c 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,399 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/armctrl.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include ++#include ++#include ++#include ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39) ++#include ++#else ++#include ++#endif ++#include ++ ++#include ++#include ++#include "armctrl.h" ++ ++/* For support of kernels >= 3.0 assume only one VIC for now*/ ++static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = { ++ INTERRUPT_VC_JPEG, ++ INTERRUPT_VC_USB, ++ INTERRUPT_VC_3D, ++ INTERRUPT_VC_DMA2, ++ INTERRUPT_VC_DMA3, ++ INTERRUPT_VC_I2C, ++ INTERRUPT_VC_SPI, ++ INTERRUPT_VC_I2SPCM, ++ INTERRUPT_VC_SDIO, ++ INTERRUPT_VC_UART, ++ INTERRUPT_VC_ARASANSDIO ++}; ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) ++static void armctrl_mask_irq(struct irq_data *d) ++#else ++static void armctrl_mask_irq(unsigned int irq) ++#endif ++{ ++ static const unsigned int disables[4] = { ++ IO_ADDRESS(ARM_IRQ_DIBL1), ++ IO_ADDRESS(ARM_IRQ_DIBL2), ++ IO_ADDRESS(ARM_IRQ_DIBL3), ++ 0 ++ }; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) ++ unsigned int data = (unsigned int)irq_get_chip_data(d->irq); ++#else ++ unsigned int data = (unsigned int)get_irq_chip_data(irq); ++#endif ++ writel(1 << (data & 0x1f), __io(disables[(data >> 5) & 0x3])); ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) ++static void armctrl_unmask_irq(struct irq_data *d) ++#else ++static void armctrl_unmask_irq(unsigned int irq) ++#endif ++{ ++ static const unsigned int enables[4] = { ++ IO_ADDRESS(ARM_IRQ_ENBL1), ++ IO_ADDRESS(ARM_IRQ_ENBL2), ++ IO_ADDRESS(ARM_IRQ_ENBL3), ++ 0 ++ }; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) ++ unsigned int data = (unsigned int)irq_get_chip_data(d->irq); ++#else ++ unsigned int data = (unsigned int)get_irq_chip_data(irq); ++#endif ++ writel(1 << (data & 0x1f), __io(enables[(data >> 5) & 0x3])); ++} ++ ++#if defined(CONFIG_PM) ++ ++/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */ ++ ++/* Static defines ++ * struct armctrl_device - VIC PM device (< 3.xx) ++ * @sysdev: The system device which is registered. (< 3.xx) ++ * @irq: The IRQ number for the base of the VIC. ++ * @base: The register base for the VIC. ++ * @resume_sources: A bitmask of interrupts for resume. ++ * @resume_irqs: The IRQs enabled for resume. ++ * @int_select: Save for VIC_INT_SELECT. ++ * @int_enable: Save for VIC_INT_ENABLE. ++ * @soft_int: Save for VIC_INT_SOFT. ++ * @protect: Save for VIC_PROTECT. ++ */ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39) ++struct armctrl_device { ++ struct sys_device sysdev; ++#else ++ struct armctrl_info { ++#endif ++ void __iomem *base; ++ int irq; ++ u32 resume_sources; ++ u32 resume_irqs; ++ u32 int_select; ++ u32 int_enable; ++ u32 soft_int; ++ u32 protect; ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39) ++}; ++#else ++ } armctrl; ++#endif ++ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39) ++ ++static struct armctrl_device armctrl_devices[1]; ++ ++static inline struct armctrl_device *to_vic(struct sys_device *sys) ++{ ++ return container_of(sys, struct armctrl_device, sysdev); ++} ++ ++static int armctrl_id; ++ ++static int armctrl_class_resume(struct sys_device *dev) ++{ ++#if 0 // FIXME ++ struct armctrl_device *armctrl = to_vic(dev); ++ void __iomem *base = armctrl->base; ++ ++ printk(KERN_DEBUG "%s: resuming armctrl at %p\n", __func__, base); ++ ++ writel(armctrl->int_select, base + VIC_INT_SELECT); ++ writel(armctrl->protect, base + VIC_PROTECT); ++ ++ /* set the enabled ints and then clear the non-enabled */ ++ writel(armctrl->int_enable, base + VIC_INT_ENABLE); ++ writel(~armctrl->int_enable, base + VIC_INT_ENABLE_CLEAR); ++ ++ /* and the same for the soft-int register */ ++ ++ writel(armctrl->soft_int, base + VIC_INT_SOFT); ++ writel(~armctrl->soft_int, base + VIC_INT_SOFT_CLEAR); ++#endif ++ return 0; ++} ++ ++static int armctrl_class_suspend(struct sys_device *dev, pm_message_t state) ++{ ++#if 0 // FIXME ++ struct armctrl_device *armctrl = to_vic(dev); ++ void __iomem *base = armctrl->base; ++ ++ printk(KERN_DEBUG "%s: suspending armctrl at %p\n", __func__, base); ++ ++ armctrl->int_select = readl(base + VIC_INT_SELECT); ++ armctrl->int_enable = readl(base + VIC_INT_ENABLE); ++ armctrl->soft_int = readl(base + VIC_INT_SOFT); ++ armctrl->protect = readl(base + VIC_PROTECT); ++ ++ /* set the interrupts (if any) that are used for ++ * resuming the system */ ++ ++ writel(armctrl->resume_irqs, base + VIC_INT_ENABLE); ++ writel(~armctrl->resume_irqs, base + VIC_INT_ENABLE_CLEAR); ++#endif ++ return 0; ++} ++ ++struct sysdev_class armctrl_class = { ++ .name = "armctrl", ++ .suspend = armctrl_class_suspend, ++ .resume = armctrl_class_resume, ++}; ++ ++#endif // < 2.6.39 ++ ++static int armctrl_suspend(void) ++{ ++ return 0; ++} ++ ++static void armctrl_resume(void) ++{ ++ return; ++} ++ ++ ++/** ++ * armctrl_pm_register - Register a VIC for later power management control ++ * @base: The base address of the VIC. ++ * @irq: The base IRQ for the VIC. ++ * @resume_sources: bitmask of interrupts allowed for resume sources. ++ * ++ * For older kernels (< 3.xx) do - ++ * Register the VIC with the system device tree so that it can be notified ++ * of suspend and resume requests and ensure that the correct actions are ++ * taken to re-instate the settings on resume. ++ */ ++static void __init armctrl_pm_register(void __iomem * base, unsigned int irq, ++ u32 resume_sources) ++{ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39) ++ struct armctrl_device *v; ++ ++ if (armctrl_id >= ARRAY_SIZE(armctrl_devices)) ++ printk(KERN_ERR ++ "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", ++ __func__); ++ else { ++ v = &armctrl_devices[armctrl_id]; ++ v->base = base; ++ v->resume_sources = resume_sources; ++ v->irq = irq; ++ armctrl_id++; ++ } ++#else ++ armctrl.base = base; ++ armctrl.resume_sources = resume_sources; ++ armctrl.irq = irq; ++#endif ++} ++ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39) ++ ++/** ++ * armctrl_pm_init - initicall to register VIC pm ++ * ++ * This is called via late_initcall() to register ++ * the resources for the VICs due to the early ++ * nature of the VIC's registration. ++*/ ++static int __init armctrl_pm_init(void) ++{ ++ struct armctrl_device *dev = armctrl_devices; ++ int err; ++ int id; ++ ++ if (armctrl_id == 0) ++ return 0; ++ ++ err = sysdev_class_register(&armctrl_class); ++ if (err) { ++ printk(KERN_ERR "%s: cannot register class\n", __func__); ++ return err; ++ } ++ ++ for (id = 0; id < armctrl_id; id++, dev++) { ++ dev->sysdev.id = id; ++ dev->sysdev.cls = &armctrl_class; ++ ++ err = sysdev_register(&dev->sysdev); ++ if (err) { ++ printk(KERN_ERR "%s: failed to register device\n", ++ __func__); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ ++late_initcall(armctrl_pm_init); ++ ++#endif // VERSION check ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) ++static int armctrl_set_wake(struct irq_data *d, unsigned int on) ++#else ++static int armctrl_set_wake(unsigned int irq, unsigned int on) ++#endif ++{ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39) ++ struct armctrl_device *armctrl = &armctrl_devices[0]; ++#endif ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) ++ unsigned int off = d->irq & 31; ++#else ++ unsigned int off = irq & 31; ++#endif ++ u32 bit = 1 << off; ++ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39) ++ if (!armctrl) ++ return -EINVAL; ++ ++ if (!(bit & armctrl->resume_sources)) ++ return -EINVAL; ++ ++ if (on) ++ armctrl->resume_irqs |= bit; ++ else ++ armctrl->resume_irqs &= ~bit; ++#else ++ if (!(bit & armctrl.resume_sources)) ++ return -EINVAL; ++ ++ if (on) ++ armctrl.resume_irqs |= bit; ++ else ++ armctrl.resume_irqs &= ~bit; ++#endif ++ ++ return 0; ++} ++ ++#else ++static inline void armctrl_pm_register(void __iomem *base, unsigned int irq, ++ u32 arg1) ++{ ++} ++#define armctrl_suspend NULL ++#define armctrl_resume NULL ++#define armctrl_set_wake NULL ++#endif /* CONFIG_PM */ ++ ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39) ++ ++static struct syscore_ops armctrl_syscore_ops = { ++ .suspend = armctrl_suspend, ++ .resume = armctrl_resume, ++}; ++ ++/** ++ * armctrl_syscore_init - initicall to register VIC pm functions ++ * ++ * This is called via late_initcall() to register ++ * the resources for the VICs due to the early ++ * nature of the VIC's registration. ++*/ ++static int __init armctrl_syscore_init(void) ++{ ++ register_syscore_ops(&armctrl_syscore_ops); ++ return 0; ++} ++ ++late_initcall(armctrl_syscore_init); ++ ++#endif ++ ++static struct irq_chip armctrl_chip = { ++ .name = "ARMCTRL", ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) ++ .irq_ack = armctrl_mask_irq, ++ .irq_mask = armctrl_mask_irq, ++ .irq_unmask = armctrl_unmask_irq, ++ .irq_set_wake = armctrl_set_wake, ++#else ++ .ack = armctrl_mask_irq, ++ .mask = armctrl_mask_irq, ++ .unmask = armctrl_unmask_irq, ++ .set_wake = armctrl_set_wake, ++#endif ++}; ++ ++/** ++ * armctrl_init - initialise a vectored interrupt controller ++ * @base: iomem base address ++ * @irq_start: starting interrupt number, must be muliple of 32 ++ * @armctrl_sources: bitmask of interrupt sources to allow ++ * @resume_sources: bitmask of interrupt sources to allow for resume ++ */ ++int __init armctrl_init(void __iomem * base, unsigned int irq_start, ++ u32 armctrl_sources, u32 resume_sources) ++{ ++ unsigned int irq; ++ ++ for (irq = 0; irq < NR_IRQS; irq++) { ++ unsigned int data = irq; ++ if (irq >= INTERRUPT_JPEG) ++ data = remap_irqs[irq - INTERRUPT_JPEG]; ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) ++ irq_set_chip(irq, &armctrl_chip); ++ irq_set_chip_data(irq, (void *)data); ++ irq_set_handler(irq, handle_level_irq); ++#else ++ set_irq_chip(irq, &armctrl_chip); ++ set_irq_chip_data(irq, (void *)data); ++ set_irq_handler(irq, handle_level_irq); ++#endif ++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_DISABLED); ++ } ++ ++ armctrl_pm_register(base, irq_start, resume_sources); ++ return 0; ++} +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/armctrl.h bootc-3.2.21/arch/arm/mach-bcm2708/armctrl.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/armctrl.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/armctrl.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,27 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/armctrl.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __BCM2708_ARMCTRL_H ++#define __BCM2708_ARMCTRL_H ++ ++extern int __init armctrl_init(void __iomem * base, unsigned int irq_start, ++ u32 armctrl_sources, u32 resume_sources); ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/bcm2708.c bootc-3.2.21/arch/arm/mach-bcm2708/bcm2708.c +--- upstream-3.2.21/arch/arm/mach-bcm2708/bcm2708.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/bcm2708.c 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,749 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/bcm2708.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include "bcm2708.h" ++#include "armctrl.h" ++#include "clock.h" ++ ++/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to ++ * give us IO access only to 64Mbytes of physical memory (26 bits). We could ++ * represent this window by setting our dmamasks to 26 bits but, in fact ++ * we're not going to use addresses outside this range (they're not in real ++ * memory) so we don't bother. ++ * ++ * In the future we might include code to use this IOMMU to remap other ++ * physical addresses onto VideoCore memory then the use of 32-bits would be ++ * more legitimate. ++ */ ++#define DMA_MASK_BITS_COMMON 32 ++ ++static DEFINE_CLOCK_DATA(cd); ++ ++/* command line parameters */ ++static unsigned boardrev, serial; ++ ++static void __init bcm2708_init_led(void); ++ ++void __init bcm2708_init_irq(void) ++{ ++ armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0); ++} ++ ++static struct map_desc bcm2708_io_desc[] __initdata = { ++ { ++ .virtual = IO_ADDRESS(ARMCTRL_BASE), ++ .pfn = __phys_to_pfn(ARMCTRL_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE}, ++ { ++ .virtual = IO_ADDRESS(UART0_BASE), ++ .pfn = __phys_to_pfn(UART0_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE}, ++ { ++ .virtual = IO_ADDRESS(UART1_BASE), ++ .pfn = __phys_to_pfn(UART1_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE}, ++#ifdef CONFIG_MMC_BCM2708 /* broadcom legacy SD */ ++ { ++ .virtual = IO_ADDRESS(MMCI0_BASE), ++ .pfn = __phys_to_pfn(MMCI0_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE}, ++#endif ++ { ++ .virtual = IO_ADDRESS(DMA_BASE), ++ .pfn = __phys_to_pfn(DMA_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE}, ++ { ++ .virtual = IO_ADDRESS(MCORE_BASE), ++ .pfn = __phys_to_pfn(MCORE_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE}, ++ { ++ .virtual = IO_ADDRESS(ST_BASE), ++ .pfn = __phys_to_pfn(ST_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE}, ++ { ++ .virtual = IO_ADDRESS(USB_BASE), ++ .pfn = __phys_to_pfn(USB_BASE), ++ .length = SZ_128K, ++ .type = MT_DEVICE}, ++ { ++ .virtual = IO_ADDRESS(PM_BASE), ++ .pfn = __phys_to_pfn(PM_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE}, ++ { ++ .virtual = IO_ADDRESS(GPIO_BASE), ++ .pfn = __phys_to_pfn(GPIO_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE} ++}; ++ ++void __init bcm2708_map_io(void) ++{ ++ iotable_init(bcm2708_io_desc, ARRAY_SIZE(bcm2708_io_desc)); ++} ++ ++// The STC is a free running counter that increments at the rate of 1MHz ++#define STC_FREQ_HZ 1000000 ++ ++static cycle_t stc_read_cycles(struct clocksource *cs) ++{ ++ /* STC: a free running counter that increments at the rate of 1MHz */ ++ return (cycle_t) readl(__io_address(ST_BASE + 0x04)); ++} ++ ++static struct clocksource clocksource_stc = { ++ .name = "stc", ++ .rating = 300, ++ .read = stc_read_cycles, ++ .mask = CLOCKSOURCE_MASK(32), ++ .flags = CLOCK_SOURCE_IS_CONTINUOUS, ++}; ++ ++unsigned long frc_clock_ticks32(void) ++{ ++ return (unsigned long)stc_read_cycles(&clocksource_stc); ++} ++ ++static void __init bcm2708_clocksource_init(void) ++{ ++ // calculate .shift and .mult values and register clocksource ++ if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) { ++ printk(KERN_ERR "timer: failed to initialize clock " ++ "source %s\n", clocksource_stc.name); ++ } ++} ++ ++unsigned long long sched_clock(void) ++{ ++ u32 cyc = clocksource_stc.read(&clocksource_stc); ++ return cyc_to_fixed_sched_clock(&cd, cyc, clocksource_stc.mask, ++ clocksource_stc.mult, clocksource_stc.shift); ++} ++ ++static void notrace bcm2708_update_sched_clock(void) ++{ ++ u32 cyc = clocksource_stc.read(&clocksource_stc); ++ update_sched_clock(&cd, cyc, clocksource_stc.mask); ++} ++ ++/* ++ * These are fixed clocks. ++ */ ++static struct clk ref24_clk = { ++ .rate = UART0_CLOCK, /* The UART is clocked at 3MHz via APB_CLK */ ++}; ++ ++static struct clk osc_clk = { ++#ifdef CONFIG_ARCH_BCM2708_CHIPIT ++ .rate = 27000000, ++#else ++ .rate = 500000000, /* ARM clock is set from the VideoCore booter */ ++#endif ++}; ++ ++/* warning - the USB needs a clock > 34MHz */ ++ ++static struct clk sdhost_clk = { ++#ifdef CONFIG_ARCH_BCM2708_CHIPIT ++ .rate = 4000000, /* 4MHz */ ++#else ++ .rate = 250000000, /* 250MHz */ ++#endif ++}; ++ ++static struct clk_lookup lookups[] = { ++ { /* UART0 */ ++ .dev_id = "dev:f1", ++ .clk = &ref24_clk, ++ }, ++ { /* USB */ ++ .dev_id = "bcm2708_usb", ++ .clk = &osc_clk, ++#ifdef CONFIG_MMC_BCM2708 ++ }, ++ { /* MCI */ ++ .dev_id = "bcm2708_mci.0", ++ .clk = &sdhost_clk, ++#endif ++ }, { /* SPI */ ++ .dev_id = "bcm2708_spi.0", ++ .clk = &sdhost_clk, ++ }, { /* BSC0 */ ++ .dev_id = "bcm2708_i2c.0", ++ .clk = &sdhost_clk, ++ }, { /* BSC1 */ ++ .dev_id = "bcm2708_i2c.1", ++ .clk = &sdhost_clk, ++ } ++}; ++ ++#define UART0_IRQ { IRQ_UART, NO_IRQ } ++#define UART0_DMA { 15, 14 } ++ ++AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); ++ ++static struct amba_device *amba_devs[] __initdata = { ++ &uart0_device, ++}; ++ ++static struct resource bcm2708_dmaman_resources[] = { ++ { ++ .start = DMA_BASE, ++ .end = DMA_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct platform_device bcm2708_dmaman_device = { ++ .name = BCM_DMAMAN_DRIVER_NAME, ++ .id = 0, /* first bcm2708_dma */ ++ .resource = bcm2708_dmaman_resources, ++ .num_resources = ARRAY_SIZE(bcm2708_dmaman_resources), ++}; ++ ++#ifdef CONFIG_MMC_BCM2708 ++static struct resource bcm2708_mci_resources[] = { ++ { ++ .start = MMCI0_BASE, ++ .end = MMCI0_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = IRQ_SDIO, ++ .end = IRQ_SDIO, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device bcm2708_mci_device = { ++ .name = "bcm2708_mci", ++ .id = 0, /* first bcm2708_mci */ ++ .resource = bcm2708_mci_resources, ++ .num_resources = ARRAY_SIZE(bcm2708_mci_resources), ++ .dev = { ++ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), ++ }, ++}; ++#endif /* CONFIG_MMC_BCM2708 */ ++ ++static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); ++ ++static struct platform_device bcm2708_fb_device = { ++ .name = "bcm2708_fb", ++ .id = -1, /* only one bcm2708_fb */ ++ .resource = NULL, ++ .num_resources = 0, ++ .dev = { ++ .dma_mask = &fb_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), ++ }, ++}; ++ ++static struct plat_serial8250_port bcm2708_uart1_platform_data[] = { ++ { ++ .mapbase = UART1_BASE + 0x40, ++ .irq = IRQ_AUX, ++ .uartclk = 125000000, ++ .regshift = 2, ++ .iotype = UPIO_MEM, ++ .flags = UPF_FIXED_TYPE | UPF_IOREMAP | UPF_SKIP_TEST, ++ .type = PORT_8250, ++ }, ++ {}, ++}; ++ ++static struct platform_device bcm2708_uart1_device = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev = { ++ .platform_data = bcm2708_uart1_platform_data, ++ }, ++}; ++ ++static struct resource bcm2708_usb_resources[] = { ++ [0] = { ++ .start = USB_BASE, ++ .end = USB_BASE + SZ_128K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_USB, ++ .end = IRQ_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); ++ ++static struct platform_device bcm2708_usb_device = { ++ .name = "bcm2708_usb", ++ .id = -1, /* only one bcm2708_usb */ ++ .resource = bcm2708_usb_resources, ++ .num_resources = ARRAY_SIZE(bcm2708_usb_resources), ++ .dev = { ++ .dma_mask = &usb_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), ++ }, ++}; ++ ++static struct resource bcm2708_vcio_resources[] = { ++ [0] = { /* mailbox/semaphore/doorbell access */ ++ .start = MCORE_BASE, ++ .end = MCORE_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); ++ ++static struct platform_device bcm2708_vcio_device = { ++ .name = BCM_VCIO_DRIVER_NAME, ++ .id = -1, /* only one VideoCore I/O area */ ++ .resource = bcm2708_vcio_resources, ++ .num_resources = ARRAY_SIZE(bcm2708_vcio_resources), ++ .dev = { ++ .dma_mask = &vcio_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), ++ }, ++}; ++ ++#ifdef CONFIG_BCM2708_GPIO ++#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio" ++ ++static struct resource bcm2708_gpio_resources[] = { ++ [0] = { /* general purpose I/O */ ++ .start = GPIO_BASE, ++ .end = GPIO_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static u64 gpio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); ++ ++static struct platform_device bcm2708_gpio_device = { ++ .name = BCM_GPIO_DRIVER_NAME, ++ .id = -1, /* only one VideoCore I/O area */ ++ .resource = bcm2708_gpio_resources, ++ .num_resources = ARRAY_SIZE(bcm2708_gpio_resources), ++ .dev = { ++ .dma_mask = &gpio_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), ++ }, ++}; ++#endif ++ ++static struct resource bcm2708_systemtimer_resources[] = { ++ [0] = { /* system timer access */ ++ .start = ST_BASE, ++ .end = ST_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = IRQ_TIMER3, ++ .end = IRQ_TIMER3, ++ .flags = IORESOURCE_IRQ, ++ } ++ ++}; ++ ++static u64 systemtimer_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); ++ ++static struct platform_device bcm2708_systemtimer_device = { ++ .name = "bcm2708_systemtimer", ++ .id = -1, /* only one VideoCore I/O area */ ++ .resource = bcm2708_systemtimer_resources, ++ .num_resources = ARRAY_SIZE(bcm2708_systemtimer_resources), ++ .dev = { ++ .dma_mask = &systemtimer_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), ++ }, ++}; ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708 /* Arasan emmc SD */ ++static struct resource bcm2708_emmc_resources[] = { ++ [0] = { ++ .start = EMMC_BASE, ++ .end = EMMC_BASE + SZ_256 - 1, /* we only need this area */ ++ /* the memory map actually makes SZ_4K available */ ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_ARASANSDIO, ++ .end = IRQ_ARASANSDIO, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static u64 bcm2708_emmc_dmamask = 0xffffffffUL; ++ ++struct platform_device bcm2708_emmc_device = { ++ .name = "bcm2708_sdhci", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(bcm2708_emmc_resources), ++ .resource = bcm2708_emmc_resources, ++ .dev = { ++ .dma_mask = &bcm2708_emmc_dmamask, ++ .coherent_dma_mask = 0xffffffffUL}, ++}; ++#endif /* CONFIG_MMC_SDHCI_BCM2708 */ ++ ++static struct resource bcm2708_powerman_resources[] = { ++ [0] = { ++ .start = PM_BASE, ++ .end = PM_BASE + SZ_256 - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static u64 powerman_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); ++ ++struct platform_device bcm2708_powerman_device = { ++ .name = "bcm2708_powerman", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(bcm2708_powerman_resources), ++ .resource = bcm2708_powerman_resources, ++ .dev = { ++ .dma_mask = &powerman_dmamask, ++ .coherent_dma_mask = 0xffffffffUL}, ++}; ++ ++static struct platform_device bcm2708_alsa_devices[] = { ++ [0] = { ++ .name = "bcm2835_AUD0", ++ .id = 0, /* first audio device */ ++ .resource = 0, ++ .num_resources = 0, ++ }, ++}; ++ ++static struct resource bcm2708_spi_resources[] = { ++ { ++ .start = SPI0_BASE, ++ .end = SPI0_BASE + SZ_256 - 1, ++ .flags = IORESOURCE_MEM, ++ }, { ++ .start = IRQ_SPI, ++ .end = IRQ_SPI, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device bcm2708_spi_device = { ++ .name = "bcm2708_spi", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(bcm2708_spi_resources), ++ .resource = bcm2708_spi_resources, ++}; ++ ++static struct spi_board_info bcm2708_spi_devices[] = { ++ { ++ .modalias = "spidev", ++ .max_speed_hz = 500000, ++ .bus_num = 0, ++ .chip_select = 0, ++ .mode = SPI_MODE_0, ++ }, { ++ .modalias = "spidev", ++ .max_speed_hz = 500000, ++ .bus_num = 0, ++ .chip_select = 1, ++ .mode = SPI_MODE_0, ++ } ++}; ++ ++static struct resource bcm2708_bsc0_resources[] = { ++ { ++ .start = BSC0_BASE, ++ .end = BSC0_BASE + SZ_256 - 1, ++ .flags = IORESOURCE_MEM, ++ }, { ++ .start = INTERRUPT_I2C, ++ .end = INTERRUPT_I2C, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device bcm2708_bsc0_device = { ++ .name = "bcm2708_i2c", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(bcm2708_bsc0_resources), ++ .resource = bcm2708_bsc0_resources, ++}; ++ ++ ++static struct resource bcm2708_bsc1_resources[] = { ++ { ++ .start = BSC1_BASE, ++ .end = BSC1_BASE + SZ_256 - 1, ++ .flags = IORESOURCE_MEM, ++ }, { ++ .start = INTERRUPT_I2C, ++ .end = INTERRUPT_I2C, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device bcm2708_bsc1_device = { ++ .name = "bcm2708_i2c", ++ .id = 1, ++ .num_resources = ARRAY_SIZE(bcm2708_bsc1_resources), ++ .resource = bcm2708_bsc1_resources, ++}; ++ ++int __init bcm_register_device(struct platform_device *pdev) ++{ ++ int ret; ++ ++ ret = platform_device_register(pdev); ++ if (ret) ++ pr_debug("Unable to register platform device '%s': %d\n", ++ pdev->name, ret); ++ ++ return ret; ++} ++ ++void __init bcm2708_init(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(lookups); i++) ++ clkdev_add(&lookups[i]); ++ ++ bcm_register_device(&bcm2708_dmaman_device); ++ bcm_register_device(&bcm2708_vcio_device); ++#ifdef CONFIG_BCM2708_GPIO ++ bcm_register_device(&bcm2708_gpio_device); ++#endif ++ bcm_register_device(&bcm2708_systemtimer_device); ++#ifdef CONFIG_MMC_BCM2708 ++ bcm_register_device(&bcm2708_mci_device); ++#endif ++ bcm_register_device(&bcm2708_fb_device); ++ bcm_register_device(&bcm2708_usb_device); ++ bcm_register_device(&bcm2708_uart1_device); ++ bcm_register_device(&bcm2708_powerman_device); ++#ifdef CONFIG_MMC_SDHCI_BCM2708 ++ bcm_register_device(&bcm2708_emmc_device); ++#endif ++ bcm2708_init_led(); ++ for (i = 0; i < ARRAY_SIZE(bcm2708_alsa_devices); i++) ++ bcm_register_device(&bcm2708_alsa_devices[i]); ++ ++ bcm_register_device(&bcm2708_spi_device); ++ bcm_register_device(&bcm2708_bsc0_device); ++ bcm_register_device(&bcm2708_bsc1_device); ++ ++#ifdef CONFIG_BCM2708_VCMEM ++ { ++ extern void vc_mem_connected_init(void); ++ vc_mem_connected_init(); ++ } ++#endif ++ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { ++ struct amba_device *d = amba_devs[i]; ++ amba_device_register(d, &iomem_resource); ++ } ++ system_rev = boardrev; ++ system_serial_low = serial; ++ ++#ifdef CONFIG_SPI ++ spi_register_board_info(bcm2708_spi_devices, ++ ARRAY_SIZE(bcm2708_spi_devices)); ++#endif ++} ++ ++#define TIMER_PERIOD 10000 /* HZ in microsecs */ ++ ++static void timer_set_mode(enum clock_event_mode mode, ++ struct clock_event_device *clk) ++{ ++ unsigned long stc; ++ ++ switch (mode) { ++ case CLOCK_EVT_MODE_PERIODIC: ++ stc = readl(__io_address(ST_BASE + 0x04)); ++ writel(stc + TIMER_PERIOD, __io_address(ST_BASE + 0x18)); /* stc3 */ ++ break; ++ case CLOCK_EVT_MODE_ONESHOT: ++ case CLOCK_EVT_MODE_UNUSED: ++ case CLOCK_EVT_MODE_SHUTDOWN: ++ default: ++ printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n", ++ (int)mode); ++ break; ++ } ++ ++} ++ ++static int timer_set_next_event(unsigned long cycles, ++ struct clock_event_device *unused) ++{ ++ unsigned long stc; ++ ++ stc = readl(__io_address(ST_BASE + 0x04)); ++ writel(stc + cycles, __io_address(ST_BASE + 0x18)); /* stc3 */ ++ return 0; ++} ++ ++static struct clock_event_device timer0_clockevent = { ++ .name = "timer0", ++ .shift = 32, ++ .features = CLOCK_EVT_FEAT_ONESHOT, ++ .set_mode = timer_set_mode, ++ .set_next_event = timer_set_next_event, ++}; ++ ++/* ++ * IRQ handler for the timer ++ */ ++static irqreturn_t bcm2708_timer_interrupt(int irq, void *dev_id) ++{ ++ struct clock_event_device *evt = &timer0_clockevent; ++ ++ writel(1 << 3, __io_address(ST_BASE + 0x00)); /* stcs clear timer int */ ++ ++ evt->event_handler(evt); ++ ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction bcm2708_timer_irq = { ++ .name = "BCM2708 Timer Tick", ++ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, ++ .handler = bcm2708_timer_interrupt, ++}; ++ ++/* ++ * Set up timer interrupt, and return the current time in seconds. ++ */ ++static void __init bcm2708_timer_init(void) ++{ ++ /* init high res timer */ ++ bcm2708_clocksource_init(); ++ ++ /* ++ * Initialise to a known state (all timers off) ++ */ ++ writel(0, __io_address(ARM_T_CONTROL)); ++ /* ++ * Make irqs happen for the system timer ++ */ ++ setup_irq(IRQ_TIMER3, &bcm2708_timer_irq); ++ ++ init_fixed_sched_clock(&cd, bcm2708_update_sched_clock, 32, ++ STC_FREQ_HZ, clocksource_stc.mult, clocksource_stc.shift); ++ ++ timer0_clockevent.mult = ++ div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift); ++ timer0_clockevent.max_delta_ns = ++ clockevent_delta2ns(0xffffffff, &timer0_clockevent); ++ timer0_clockevent.min_delta_ns = ++ clockevent_delta2ns(0xf, &timer0_clockevent); ++ ++ timer0_clockevent.cpumask = cpumask_of(0); ++ clockevents_register_device(&timer0_clockevent); ++} ++ ++struct sys_timer bcm2708_timer = { ++ .init = bcm2708_timer_init, ++}; ++ ++#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) ++#include ++ ++static struct gpio_led bcm2708_leds[] = { ++ [0] = { ++ .gpio = 16, ++ .name = "led0", ++ .default_trigger = "mmc0", ++ .active_low = 1, ++ }, ++}; ++ ++static struct gpio_led_platform_data bcm2708_led_pdata = { ++ .num_leds = ARRAY_SIZE(bcm2708_leds), ++ .leds = bcm2708_leds, ++}; ++ ++static struct platform_device bcm2708_led_device = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev = { ++ .platform_data = &bcm2708_led_pdata, ++ }, ++}; ++ ++static void __init bcm2708_init_led(void) ++{ ++ platform_device_register(&bcm2708_led_device); ++} ++#else ++static inline void bcm2708_init_led(void) ++{ ++} ++#endif ++ ++MACHINE_START(BCM2708, "BCM2708") ++ /* Maintainer: Broadcom Europe Ltd. */ ++ .map_io = bcm2708_map_io,.init_irq = bcm2708_init_irq,.timer = ++ &bcm2708_timer,.init_machine = ++ bcm2708_init, MACHINE_END module_param(boardrev, uint, 0644); ++module_param(serial, uint, 0644); +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/bcm2708_gpio.c bootc-3.2.21/arch/arm/mach-bcm2708/bcm2708_gpio.c +--- upstream-3.2.21/arch/arm/mach-bcm2708/bcm2708_gpio.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/bcm2708_gpio.c 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,323 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/bcm2708_gpio.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio" ++#define DRIVER_NAME BCM_GPIO_DRIVER_NAME ++#define BCM_GPIO_USE_IRQ 0 ++ ++#define GPIOFSEL(x) (0x00+(x)*4) ++#define GPIOSET(x) (0x1c+(x)*4) ++#define GPIOCLR(x) (0x28+(x)*4) ++#define GPIOLEV(x) (0x34+(x)*4) ++#define GPIOEDS(x) (0x40+(x)*4) ++#define GPIOREN(x) (0x4c+(x)*4) ++#define GPIOFEN(x) (0x58+(x)*4) ++#define GPIOHEN(x) (0x64+(x)*4) ++#define GPIOLEN(x) (0x70+(x)*4) ++#define GPIOAREN(x) (0x7c+(x)*4) ++#define GPIOAFEN(x) (0x88+(x)*4) ++#define GPIOUD(x) (0x94+(x)*4) ++#define GPIOUDCLK(x) (0x98+(x)*4) ++ ++enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT, ++ GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4, ++ GPIO_FSEL_ALT0, GPIO_FSEL_ALT1, ++ GPIO_FSEL_ALT2, GPIO_FSEL_ALT3, }; ++ ++ /* Each of the two spinlocks protects a different set of hardware ++ * regiters and data structurs. This decouples the code of the IRQ from ++ * the GPIO code. This also makes the case of a GPIO routine call from ++ * the IRQ code simpler. ++ */ ++static DEFINE_SPINLOCK(lock); /* GPIO registers */ ++static DEFINE_SPINLOCK(irq_lock); /* IRQ registers */ ++ ++ ++struct bcm2708_gpio { ++ /* We use a list of bcm2708_gpio structs for each trigger IRQ in the main ++ * interrupts controller of the system. We need this to support systems ++ * in which more that one bcm2708s are connected to the same IRQ. The ISR ++ * interates through this list to find the source of the interrupt. ++ */ ++ struct list_head list; ++ ++ void __iomem *base; ++ unsigned irq_base; ++ struct gpio_chip gc; ++}; ++ ++static int bcm2708_set_function(struct gpio_chip *gc, unsigned offset, int function) ++{ ++ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); ++ unsigned long flags; ++ unsigned gpiodir; ++ unsigned gpio_bank = offset/10; ++ unsigned gpio_field_offset = (offset - 10*gpio_bank) * 3; ++ ++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set_function %p (%d,%d)\n", gc, offset, function); ++ if (offset >= ARCH_NR_GPIOS) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&lock, flags); ++ ++ gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank)); ++ gpiodir &= ~(7 << gpio_field_offset); ++ gpiodir |= function << gpio_field_offset; ++ writel(gpiodir, gpio->base + GPIOFSEL(gpio_bank)); ++ spin_unlock_irqrestore(&lock, flags); ++ gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank)); ++ ++ return 0; ++} ++ ++ ++static int bcm2708_gpio_dir_in(struct gpio_chip *gc, unsigned offset) ++{ ++ return bcm2708_set_function(gc, offset, GPIO_FSEL_INPUT); ++} ++ ++static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value); ++static int bcm2708_gpio_dir_out(struct gpio_chip *gc, unsigned offset, int value) ++{ ++ int ret; ++ ret = bcm2708_set_function(gc, offset, GPIO_FSEL_OUTPUT); ++ if (ret >= 0) ++ bcm2708_gpio_set(gc, offset, value); ++ return ret; ++} ++ ++static int bcm2708_gpio_get(struct gpio_chip *gc, unsigned offset) ++{ ++ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); ++ unsigned gpio_bank = offset/32; ++ unsigned gpio_field_offset = (offset - 32*gpio_bank); ++ unsigned lev; ++ ++ if (offset >= ARCH_NR_GPIOS) ++ return 0; ++ lev = readl(gpio->base + GPIOLEV(gpio_bank)); ++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_get %p (%d)=%d\n", gc, offset, 0x1 & (lev>>gpio_field_offset)); ++ return 0x1 & (lev>>gpio_field_offset); ++} ++ ++static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value) ++{ ++ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); ++ unsigned gpio_bank = offset/32; ++ unsigned gpio_field_offset = (offset - 32*gpio_bank); ++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set %p (%d=%d)\n", gc, offset, value); ++ if (offset >= ARCH_NR_GPIOS) ++ return; ++ if (value) ++ writel(1<base + GPIOSET(gpio_bank)); ++ else ++ writel(1<base + GPIOCLR(gpio_bank)); ++} ++ ++/* ++ * bcm2708 GPIO IRQ ++ */ ++ ++#if BCM_GPIO_USE_IRQ ++static void bcm2708_irq_disable(unsigned irq) ++{ ++ struct bcm2708_gpio *chip = get_irq_chip_data(irq); ++ //int offset = irq - gpio->irq_base; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&chip->irq_lock, flags); ++ // disable gpio interrupts here ++ spin_unlock_irqrestore(&chip->irq_lock, flags); ++} ++ ++static void bcm2708_irq_enable(unsigned irq) ++{ ++ struct bcm2708_gpio *chip = get_irq_chip_data(irq); ++ //int offset = irq - chip->irq_base; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&chip->irq_lock, flags); ++ // enable gpio interrupts here ++ spin_unlock_irqrestore(&chip->irq_lock, flags); ++} ++ ++static int bcm2708_irq_type(unsigned irq, unsigned trigger) ++{ ++ struct bcm2708_gpio *chip = get_irq_chip_data(irq); ++ int offset = irq - chip->irq_base; ++ unsigned long flags; ++ unsigned gpio_bank = offset/32; ++ unsigned gpio_field_offset = (offset - 32*gpio_bank); ++ unsigned gpioren, gpiofen, gpiohen, gpiolen; ++ ++ if (offset < 0 || offset >= ARCH_NR_GPIOS) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&chip->irq_lock, flags); ++ ++ gpioren = readl(chip->base + GPIOREN(gpio_bank)); ++ gpiofen = readl(chip->base + GPIOFEN(gpio_bank)); ++ gpiohen = readl(chip->base + GPIOHEN(gpio_bank)); ++ gpiolen = readl(chip->base + GPIOLEN(gpio_bank)); ++ ++ if (trigger & (IRQ_TYPE_EDGE_RISING)) ++ gpioren |= (1<base + GPIOREN(gpio_bank)); ++ writel(gpiofen, chip->base + GPIOFEN(gpio_bank)); ++ writel(gpiohen, chip->base + GPIOHEN(gpio_bank)); ++ writel(gpiolen, chip->base + GPIOLEN(gpio_bank)); ++ ++ spin_unlock_irqrestore(&chip->irq_lock, flags); ++ ++ return 0; ++} ++ ++static struct irq_chip bcm2708_irqchip = { ++ .name = "GPIO", ++ .enable = bcm2708_irq_enable, ++ .disable = bcm2708_irq_disable, ++ .set_type = bcm2708_irq_type, ++}; ++ ++static void bcm2708_irq_handler(unsigned irq, struct irq_desc *desc) ++{ ++ struct list_head *chip_list = get_irq_data(irq); ++ struct list_head *ptr; ++ struct bcm2708_gpio *chip; ++ unsigned gpio_bank; ++ ++ desc->chip->ack(irq); ++ list_for_each(ptr, chip_list) { ++ unsigned long pending; ++ int offset; ++ ++ chip = list_entry(ptr, struct bcm2708_gpio, list); ++ for (gpio_bank = 0; gpio_bank < ARCH_NR_GPIOS/32; gpio_bank++) { ++ pending = readl(chip->base + GPIOEDS(gpio_bank)); ++ writel(pending, chip->base + GPIOEDS(gpio_bank)); ++ ++ if (pending == 0) ++ continue; ++ ++ for_each_set_bit(offset, &pending, ARCH_NR_GPIOS) ++ generic_handle_irq(gpio_to_irq(offset+32*gpio_bank)); ++ } ++ } ++ desc->chip->unmask(irq); ++} ++#endif /* #if BCM_GPIO_USE_IRQ */ ++ ++static int bcm2708_gpio_probe(struct platform_device *dev) ++{ ++ struct bcm2708_gpio *ucb; ++ struct resource *res; ++ int err = 0; ++ ++ printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_probe %p\n", dev); ++ ++ ucb = kzalloc(sizeof(*ucb), GFP_KERNEL); ++ if (NULL == ucb) { ++ printk(KERN_ERR DRIVER_NAME ": failed to allocate " ++ "mailbox memory\n"); ++ err = -ENOMEM; ++ goto err; ++ } ++ ++ res = platform_get_resource(dev, IORESOURCE_MEM, 0); ++ ++ platform_set_drvdata(dev, ucb); ++ ucb->base = __io_address(GPIO_BASE); ++ ++ ucb->gc.label = "bcm2708_gpio"; ++ ucb->gc.base = 0; ++ ucb->gc.ngpio = ARCH_NR_GPIOS; ++ ucb->gc.owner = THIS_MODULE; ++ ++ ucb->gc.direction_input = bcm2708_gpio_dir_in; ++ ucb->gc.direction_output = bcm2708_gpio_dir_out; ++ ucb->gc.get = bcm2708_gpio_get; ++ ucb->gc.set = bcm2708_gpio_set; ++ ucb->gc.can_sleep = 0; ++ ++ err = gpiochip_add(&ucb->gc); ++ if (err) ++ goto err; ++ ++err: ++ return err; ++ ++} ++ ++static int bcm2708_gpio_remove(struct platform_device *dev) ++{ ++ int err = 0; ++ struct bcm2708_gpio *ucb = platform_get_drvdata(dev); ++ ++ printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_remove %p\n", dev); ++ ++ err = gpiochip_remove(&ucb->gc); ++ ++ platform_set_drvdata(dev, NULL); ++ kfree(ucb); ++ ++ return err; ++} ++ ++static struct platform_driver bcm2708_gpio_driver = { ++ .probe = bcm2708_gpio_probe, ++ .remove = bcm2708_gpio_remove, ++ .driver = { ++ .name = "bcm2708_gpio" ++ }, ++}; ++ ++static int __init bcm2708_gpio_init(void) ++{ ++ return platform_driver_register(&bcm2708_gpio_driver); ++} ++ ++static void __exit bcm2708_gpio_exit(void) ++{ ++ platform_driver_unregister(&bcm2708_gpio_driver); ++} ++ ++module_init(bcm2708_gpio_init); ++module_exit(bcm2708_gpio_exit); ++ ++MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver"); ++MODULE_LICENSE("GPL"); ++ +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/bcm2708.h bootc-3.2.21/arch/arm/mach-bcm2708/bcm2708.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/bcm2708.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/bcm2708.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,51 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/bcm2708.h ++ * ++ * BCM2708 machine support header ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __BCM2708_BCM2708_H ++#define __BCM2708_BCM2708_H ++ ++#include ++ ++extern void __init bcm2708_init(void); ++extern void __init bcm2708_init_irq(void); ++extern void __init bcm2708_map_io(void); ++extern struct sys_timer bcm2708_timer; ++extern unsigned int mmc_status(struct device *dev); ++ ++#define AMBA_DEVICE(name, busid, base, plat) \ ++static struct amba_device name##_device = { \ ++ .dev = { \ ++ .coherent_dma_mask = ~0, \ ++ .init_name = busid, \ ++ .platform_data = plat, \ ++ }, \ ++ .res = { \ ++ .start = base##_BASE, \ ++ .end = (base##_BASE) + SZ_4K - 1,\ ++ .flags = IORESOURCE_MEM, \ ++ }, \ ++ .dma_mask = ~0, \ ++ .irq = base##_IRQ, \ ++ /* .dma = base##_DMA,*/ \ ++} ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/clock.c bootc-3.2.21/arch/arm/mach-bcm2708/clock.c +--- upstream-3.2.21/arch/arm/mach-bcm2708/clock.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/clock.c 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,61 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/clock.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "clock.h" ++ ++int clk_enable(struct clk *clk) ++{ ++ return 0; ++} ++EXPORT_SYMBOL(clk_enable); ++ ++void clk_disable(struct clk *clk) ++{ ++} ++EXPORT_SYMBOL(clk_disable); ++ ++unsigned long clk_get_rate(struct clk *clk) ++{ ++ return clk->rate; ++} ++EXPORT_SYMBOL(clk_get_rate); ++ ++long clk_round_rate(struct clk *clk, unsigned long rate) ++{ ++ return clk->rate; ++} ++EXPORT_SYMBOL(clk_round_rate); ++ ++int clk_set_rate(struct clk *clk, unsigned long rate) ++{ ++ return -EIO; ++} ++EXPORT_SYMBOL(clk_set_rate); +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/clock.h bootc-3.2.21/arch/arm/mach-bcm2708/clock.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/clock.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/clock.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,24 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/clock.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++struct module; ++ ++struct clk { ++ unsigned long rate; ++}; +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/dma.c bootc-3.2.21/arch/arm/mach-bcm2708/dma.c +--- upstream-3.2.21/arch/arm/mach-bcm2708/dma.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/dma.c 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,397 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/dma.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++/*****************************************************************************\ ++ * * ++ * Configuration * ++ * * ++\*****************************************************************************/ ++ ++#define CACHE_LINE_MASK 31 ++#define DRIVER_NAME BCM_DMAMAN_DRIVER_NAME ++#define DEFAULT_DMACHAN_BITMAP 0x10 /* channel 4 only */ ++ ++/* valid only for channels 0 - 14, 15 has its own base address */ ++#define BCM2708_DMA_CHAN(n) ((n)<<8) /* base address */ ++#define BCM2708_DMA_CHANIO(dma_base, n) \ ++ ((void __iomem *)((char *)(dma_base)+BCM2708_DMA_CHAN(n))) ++ ++ ++/*****************************************************************************\ ++ * * ++ * DMA Auxilliary Functions * ++ * * ++\*****************************************************************************/ ++ ++/* A DMA buffer on an arbitrary boundary may separate a cache line into a ++ section inside the DMA buffer and another section outside it. ++ Even if we flush DMA buffers from the cache there is always the chance that ++ during a DMA someone will access the part of a cache line that is outside ++ the DMA buffer - which will then bring in unwelcome data. ++ Without being able to dictate our own buffer pools we must insist that ++ DMA buffers consist of a whole number of cache lines. ++*/ ++ ++extern int ++bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len) ++{ ++ int i; ++ ++ for (i = 0; i < sg_len; i++) { ++ if (sg_ptr[i].offset & CACHE_LINE_MASK || ++ sg_ptr[i].length & CACHE_LINE_MASK) ++ return 0; ++ } ++ ++ return 1; ++} ++EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma); ++ ++extern void ++bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block) ++{ ++ dsb(); /* ARM data synchronization (push) operation */ ++ ++ writel(control_block, dma_chan_base + BCM2708_DMA_ADDR); ++ writel(BCM2708_DMA_ACTIVE, dma_chan_base + BCM2708_DMA_CS); ++} ++ ++extern void bcm_dma_wait_idle(void __iomem *dma_chan_base) ++{ ++ dsb(); ++ ++ /* ugly busy wait only option for now */ ++ while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE); ++} ++ ++EXPORT_SYMBOL_GPL(bcm_dma_start); ++ ++/* Complete an ongoing DMA (assuming its results are to be ignored) ++ Does nothing if there is no DMA in progress. ++ This routine waits for the current AXI transfer to complete before ++ terminating the current DMA. If the current transfer is hung on a DREQ used ++ by an uncooperative peripheral the AXI transfer may never complete. In this ++ case the routine times out and return a non-zero error code. ++ Use of this routine doesn't guarantee that the ongoing or aborted DMA ++ does not produce an interrupt. ++*/ ++extern int ++bcm_dma_abort(void __iomem *dma_chan_base) ++{ ++ unsigned long int cs; ++ int rc = 0; ++ ++ cs = readl(dma_chan_base + BCM2708_DMA_CS); ++ ++ if (BCM2708_DMA_ACTIVE & cs) { ++ long int timeout = 10000; ++ ++ /* write 0 to the active bit - pause the DMA */ ++ writel(0, dma_chan_base + BCM2708_DMA_CS); ++ ++ /* wait for any current AXI transfer to complete */ ++ while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0) ++ cs = readl(dma_chan_base + BCM2708_DMA_CS); ++ ++ if (0 != (cs & BCM2708_DMA_ISPAUSED)) { ++ /* we'll un-pause when we set of our next DMA */ ++ rc = -ETIMEDOUT; ++ ++ } else if (BCM2708_DMA_ACTIVE & cs) { ++ /* terminate the control block chain */ ++ writel(0, dma_chan_base + BCM2708_DMA_NEXTCB); ++ ++ /* abort the whole DMA */ ++ writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE, ++ dma_chan_base + BCM2708_DMA_CS); ++ } ++ } ++ ++ return rc; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_abort); ++ ++ ++/***************************************************************************** \ ++ * * ++ * DMA Manager Device Methods * ++ * * ++\*****************************************************************************/ ++ ++struct vc_dmaman { ++ void __iomem *dma_base; ++ u32 chan_available; /* bitmap of available channels */ ++ u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */ ++}; ++ ++static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base, ++ u32 chans_available) ++{ ++ dmaman->dma_base = dma_base; ++ dmaman->chan_available = chans_available; ++ dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c; /* chans 2 & 3 */ ++} ++ ++static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman, ++ unsigned preferred_feature_set) ++{ ++ u32 chans; ++ int feature; ++ ++ chans = dmaman->chan_available; ++ for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++) ++ /* select the subset of available channels with the desired ++ feature so long as some of the candidate channels have that ++ feature */ ++ if ((preferred_feature_set & (1 << feature)) && ++ (chans & dmaman->has_feature[feature])) ++ chans &= dmaman->has_feature[feature]; ++ ++ if (chans) { ++ int chan = 0; ++ /* return the ordinal of the first channel in the bitmap */ ++ while (chans != 0 && (chans & 1) == 0) { ++ chans >>= 1; ++ chan++; ++ } ++ /* claim the channel */ ++ dmaman->chan_available &= ~(1 << chan); ++ return chan; ++ } else ++ return -ENOMEM; ++} ++ ++static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan) ++{ ++ if (chan < 0) ++ return -EINVAL; ++ else if ((1 << chan) & dmaman->chan_available) ++ return -EIDRM; ++ else { ++ dmaman->chan_available |= (1 << chan); ++ return 0; ++ } ++} ++ ++/*****************************************************************************\ ++ * * ++ * DMA IRQs * ++ * * ++\*****************************************************************************/ ++ ++static unsigned char bcm_dma_irqs[] = { ++ IRQ_DMA0, ++ IRQ_DMA1, ++ IRQ_DMA2, ++ IRQ_DMA3, ++ IRQ_DMA4, ++ IRQ_DMA5, ++ IRQ_DMA6, ++ IRQ_DMA7, ++ IRQ_DMA8, ++ IRQ_DMA9, ++ IRQ_DMA10, ++ IRQ_DMA11, ++ IRQ_DMA12 ++}; ++ ++ ++/***************************************************************************** \ ++ * * ++ * DMA Manager Monitor * ++ * * ++\*****************************************************************************/ ++ ++static struct device *dmaman_dev; /* we assume there's only one! */ ++ ++extern int bcm_dma_chan_alloc(unsigned preferred_feature_set, ++ void __iomem **out_dma_base, int *out_dma_irq) ++{ ++ if (!dmaman_dev) ++ return -ENODEV; ++ else { ++ struct vc_dmaman *dmaman = dev_get_drvdata(dmaman_dev); ++ int rc; ++ ++ device_lock(dmaman_dev); ++ rc = vc_dmaman_chan_alloc(dmaman, preferred_feature_set); ++ if (rc >= 0) { ++ *out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base, ++ rc); ++ *out_dma_irq = bcm_dma_irqs[rc]; ++ } ++ device_unlock(dmaman_dev); ++ ++ return rc; ++ } ++} ++EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc); ++ ++extern int bcm_dma_chan_free(int channel) ++{ ++ if (dmaman_dev) { ++ struct vc_dmaman *dmaman = dev_get_drvdata(dmaman_dev); ++ int rc; ++ ++ device_lock(dmaman_dev); ++ rc = vc_dmaman_chan_free(dmaman, channel); ++ device_unlock(dmaman_dev); ++ ++ return rc; ++ } else ++ return -ENODEV; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_chan_free); ++ ++static int dev_dmaman_register(const char *dev_name, struct device *dev) ++{ ++ int rc = dmaman_dev ? -EINVAL : 0; ++ dmaman_dev = dev; ++ return rc; ++} ++ ++static void dev_dmaman_deregister(const char *dev_name, struct device *dev) ++{ ++ dmaman_dev = NULL; ++} ++ ++/*****************************************************************************\ ++ * * ++ * DMA Device * ++ * * ++\*****************************************************************************/ ++ ++static int dmachans = -1; /* module parameter */ ++ ++static int bcm_dmaman_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ struct vc_dmaman *dmaman; ++ struct resource *dma_res = NULL; ++ void __iomem *dma_base = NULL; ++ int have_dma_region = 0; ++ ++ dmaman = kzalloc(sizeof(*dmaman), GFP_KERNEL); ++ if (NULL == dmaman) { ++ printk(KERN_ERR DRIVER_NAME ": failed to allocate " ++ "DMA management memory\n"); ++ ret = -ENOMEM; ++ } else { ++ ++ dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (dma_res == NULL) { ++ printk(KERN_ERR DRIVER_NAME ": failed to obtain memory " ++ "resource\n"); ++ ret = -ENODEV; ++ } else if (!request_mem_region(dma_res->start, ++ resource_size(dma_res), ++ DRIVER_NAME)) { ++ dev_err(&pdev->dev, "cannot obtain DMA region\n"); ++ ret = -EBUSY; ++ } else { ++ have_dma_region = 1; ++ dma_base = ioremap(dma_res->start, ++ resource_size(dma_res)); ++ if (!dma_base) { ++ dev_err(&pdev->dev, "cannot map DMA region\n"); ++ ret = -ENOMEM; ++ } else { ++ /* use module parameter if one was provided */ ++ if (dmachans > 0) ++ vc_dmaman_init(dmaman, dma_base, ++ dmachans); ++ else ++ vc_dmaman_init(dmaman, dma_base, ++ DEFAULT_DMACHAN_BITMAP); ++ ++ platform_set_drvdata(pdev, dmaman); ++ dev_dmaman_register(DRIVER_NAME, &pdev->dev); ++ ++ printk(KERN_INFO DRIVER_NAME ": DMA manager " ++ "at %p\n", dma_base); ++ } ++ } ++ } ++ if (ret != 0) { ++ if (dma_base) ++ iounmap(dma_base); ++ if (dma_res && have_dma_region) ++ release_mem_region(dma_res->start, ++ resource_size(dma_res)); ++ if (dmaman) ++ kfree(dmaman); ++ } ++ return ret; ++} ++ ++static int bcm_dmaman_remove(struct platform_device *pdev) ++{ ++ struct vc_dmaman *dmaman = platform_get_drvdata(pdev); ++ ++ platform_set_drvdata(pdev, NULL); ++ dev_dmaman_deregister(DRIVER_NAME, &pdev->dev); ++ kfree(dmaman); ++ ++ return 0; ++} ++ ++static struct platform_driver bcm_dmaman_driver = { ++ .probe = bcm_dmaman_probe, ++ .remove = bcm_dmaman_remove, ++ ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++/*****************************************************************************\ ++ * * ++ * Driver init/exit * ++ * * ++\*****************************************************************************/ ++ ++static int __init bcm_dmaman_drv_init(void) ++{ ++ int ret; ++ ++ ret = platform_driver_register(&bcm_dmaman_driver); ++ if (ret != 0) { ++ printk(KERN_ERR DRIVER_NAME ": failed to register " ++ "on platform\n"); ++ } ++ ++ return ret; ++} ++ ++static void __exit bcm_dmaman_drv_exit(void) ++{ ++ platform_driver_unregister(&bcm_dmaman_driver); ++} ++ ++module_init(bcm_dmaman_drv_init); ++module_exit(bcm_dmaman_drv_exit); ++ ++module_param(dmachans, int, 0644); ++ ++MODULE_AUTHOR("Gray Girling "); ++MODULE_DESCRIPTION("DMA channel manager driver"); ++MODULE_LICENSE("GPL"); ++ ++MODULE_PARM_DESC(dmachans, "Bitmap of DMA channels available to the ARM"); +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/arm_control.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/arm_control.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/arm_control.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/arm_control.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,419 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/arm_control.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __BCM2708_ARM_CONTROL_H ++#define __BCM2708_ARM_CONTROL_H ++ ++/* ++ * Definitions and addresses for the ARM CONTROL logic ++ * This file is manually generated. ++ */ ++ ++#define ARM_BASE 0x7E00B000 ++ ++/* Basic configuration */ ++#define ARM_CONTROL0 HW_REGISTER_RW(ARM_BASE+0x000) ++#define ARM_C0_SIZ128M 0x00000000 ++#define ARM_C0_SIZ256M 0x00000001 ++#define ARM_C0_SIZ512M 0x00000002 ++#define ARM_C0_SIZ1G 0x00000003 ++#define ARM_C0_BRESP0 0x00000000 ++#define ARM_C0_BRESP1 0x00000004 ++#define ARM_C0_BRESP2 0x00000008 ++#define ARM_C0_BOOTHI 0x00000010 ++#define ARM_C0_UNUSED05 0x00000020 /* free */ ++#define ARM_C0_FULLPERI 0x00000040 ++#define ARM_C0_UNUSED78 0x00000180 /* free */ ++#define ARM_C0_JTAGMASK 0x00000E00 ++#define ARM_C0_JTAGOFF 0x00000000 ++#define ARM_C0_JTAGBASH 0x00000800 /* Debug on GPIO off */ ++#define ARM_C0_JTAGGPIO 0x00000C00 /* Debug on GPIO on */ ++#define ARM_C0_APROTMSK 0x0000F000 ++#define ARM_C0_DBG0SYNC 0x00010000 /* VPU0 halt sync */ ++#define ARM_C0_DBG1SYNC 0x00020000 /* VPU1 halt sync */ ++#define ARM_C0_SWDBGREQ 0x00040000 /* HW debug request */ ++#define ARM_C0_PASSHALT 0x00080000 /* ARM halt passed to debugger */ ++#define ARM_C0_PRIO_PER 0x00F00000 /* per priority mask */ ++#define ARM_C0_PRIO_L2 0x0F000000 ++#define ARM_C0_PRIO_UC 0xF0000000 ++ ++#define ARM_C0_APROTPASS 0x0000A000 /* Translate 1:1 */ ++#define ARM_C0_APROTUSER 0x00000000 /* Only user mode */ ++#define ARM_C0_APROTSYST 0x0000F000 /* Only system mode */ ++ ++ ++#define ARM_CONTROL1 HW_REGISTER_RW(ARM_BASE+0x440) ++#define ARM_C1_TIMER 0x00000001 /* re-route timer IRQ to VC */ ++#define ARM_C1_MAIL 0x00000002 /* re-route Mail IRQ to VC */ ++#define ARM_C1_BELL0 0x00000004 /* re-route Doorbell 0 to VC */ ++#define ARM_C1_BELL1 0x00000008 /* re-route Doorbell 1 to VC */ ++#define ARM_C1_PERSON 0x00000100 /* peripherals on */ ++#define ARM_C1_REQSTOP 0x00000200 /* ASYNC bridge request stop */ ++ ++#define ARM_STATUS HW_REGISTER_RW(ARM_BASE+0x444) ++#define ARM_S_ACKSTOP 0x80000000 /* Bridge stopped */ ++#define ARM_S_READPEND 0x000003FF /* pending reads counter */ ++#define ARM_S_WRITPEND 0x000FFC00 /* pending writes counter */ ++ ++#define ARM_ERRHALT HW_REGISTER_RW(ARM_BASE+0x448) ++#define ARM_EH_PERIBURST 0x00000001 /* Burst write seen on peri bus */ ++#define ARM_EH_ILLADDRS1 0x00000002 /* Address bits 25-27 error */ ++#define ARM_EH_ILLADDRS2 0x00000004 /* Address bits 31-28 error */ ++#define ARM_EH_VPU0HALT 0x00000008 /* VPU0 halted & in debug mode */ ++#define ARM_EH_VPU1HALT 0x00000010 /* VPU1 halted & in debug mode */ ++#define ARM_EH_ARMHALT 0x00000020 /* ARM in halted debug mode */ ++ ++#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C) ++#define ARM_ID HW_REGISTER_RW(ARM_BASE+0x44C) ++#define ARM_IDVAL 0x364D5241 ++ ++/* Translation memory */ ++#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100) ++/* 32 locations: 0x100.. 0x17F */ ++/* 32 spare means we CAN go to 64 pages.... */ ++ ++ ++/* Interrupts */ ++#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200) /* Top IRQ bits */ ++#define ARM_I0_TIMER 0x00000001 /* timer IRQ */ ++#define ARM_I0_MAIL 0x00000002 /* Mail IRQ */ ++#define ARM_I0_BELL0 0x00000004 /* Doorbell 0 */ ++#define ARM_I0_BELL1 0x00000008 /* Doorbell 1 */ ++#define ARM_I0_BANK1 0x00000100 /* Bank1 IRQ */ ++#define ARM_I0_BANK2 0x00000200 /* Bank2 IRQ */ ++ ++#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */ ++/* todo: all I1_interrupt sources */ ++#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */ ++/* todo: all I2_interrupt sources */ ++ ++#define ARM_IRQ_FAST HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */ ++#define ARM_IF_INDEX 0x0000007F /* FIQ select */ ++#define ARM_IF_ENABLE 0x00000080 /* FIQ enable */ ++#define ARM_IF_VCMASK 0x0000003F /* FIQ = (index from VC source) */ ++#define ARM_IF_TIMER 0x00000040 /* FIQ = ARM timer */ ++#define ARM_IF_MAIL 0x00000041 /* FIQ = ARM Mail */ ++#define ARM_IF_BELL0 0x00000042 /* FIQ = ARM Doorbell 0 */ ++#define ARM_IF_BELL1 0x00000043 /* FIQ = ARM Doorbell 1 */ ++#define ARM_IF_VP0HALT 0x00000044 /* FIQ = VPU0 Halt seen */ ++#define ARM_IF_VP1HALT 0x00000045 /* FIQ = VPU1 Halt seen */ ++#define ARM_IF_ILLEGAL 0x00000046 /* FIQ = Illegal access seen */ ++ ++#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */ ++#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */ ++#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */ ++#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */ ++#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */ ++#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */ ++#define ARM_IE_TIMER 0x00000001 /* Timer IRQ */ ++#define ARM_IE_MAIL 0x00000002 /* Mail IRQ */ ++#define ARM_IE_BELL0 0x00000004 /* Doorbell 0 */ ++#define ARM_IE_BELL1 0x00000008 /* Doorbell 1 */ ++#define ARM_IE_VP0HALT 0x00000010 /* VPU0 Halt */ ++#define ARM_IE_VP1HALT 0x00000020 /* VPU1 Halt */ ++#define ARM_IE_ILLEGAL 0x00000040 /* Illegal access seen */ ++ ++/* Timer */ ++/* For reg. fields see sp804 spec. */ ++#define ARM_T_LOAD HW_REGISTER_RW(ARM_BASE+0x400) ++#define ARM_T_VALUE HW_REGISTER_RW(ARM_BASE+0x404) ++#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408) ++#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C) ++#define ARM_T_RAWIRQ HW_REGISTER_RW(ARM_BASE+0x410) ++#define ARM_T_MSKIRQ HW_REGISTER_RW(ARM_BASE+0x414) ++#define ARM_T_RELOAD HW_REGISTER_RW(ARM_BASE+0x418) ++#define ARM_T_PREDIV HW_REGISTER_RW(ARM_BASE+0x41c) ++#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420) ++ ++#define TIMER_CTRL_ONESHOT (1 << 0) ++#define TIMER_CTRL_32BIT (1 << 1) ++#define TIMER_CTRL_DIV1 (0 << 2) ++#define TIMER_CTRL_DIV16 (1 << 2) ++#define TIMER_CTRL_DIV256 (2 << 2) ++#define TIMER_CTRL_IE (1 << 5) ++#define TIMER_CTRL_PERIODIC (1 << 6) ++#define TIMER_CTRL_ENABLE (1 << 7) ++#define TIMER_CTRL_DBGHALT (1 << 8) ++#define TIMER_CTRL_ENAFREE (1 << 9) ++#define TIMER_CTRL_FREEDIV_SHIFT 16) ++#define TIMER_CTRL_FREEDIV_MASK 0xff ++ ++/* Semaphores, Doorbells, Mailboxes */ ++#define ARM_SBM_OWN0 (ARM_BASE+0x800) ++#define ARM_SBM_OWN1 (ARM_BASE+0x900) ++#define ARM_SBM_OWN2 (ARM_BASE+0xA00) ++#define ARM_SBM_OWN3 (ARM_BASE+0xB00) ++ ++/* MAILBOXES ++ * Register flags are common across all ++ * owner registers. See end of this section ++ * ++ * Semaphores, Doorbells, Mailboxes Owner 0 ++ * ++ */ ++ ++#define ARM_0_SEMS HW_REGISTER_RW(ARM_SBM_OWN0+0x00) ++#define ARM_0_SEM0 HW_REGISTER_RW(ARM_SBM_OWN0+0x00) ++#define ARM_0_SEM1 HW_REGISTER_RW(ARM_SBM_OWN0+0x04) ++#define ARM_0_SEM2 HW_REGISTER_RW(ARM_SBM_OWN0+0x08) ++#define ARM_0_SEM3 HW_REGISTER_RW(ARM_SBM_OWN0+0x0C) ++#define ARM_0_SEM4 HW_REGISTER_RW(ARM_SBM_OWN0+0x10) ++#define ARM_0_SEM5 HW_REGISTER_RW(ARM_SBM_OWN0+0x14) ++#define ARM_0_SEM6 HW_REGISTER_RW(ARM_SBM_OWN0+0x18) ++#define ARM_0_SEM7 HW_REGISTER_RW(ARM_SBM_OWN0+0x1C) ++#define ARM_0_BELL0 HW_REGISTER_RW(ARM_SBM_OWN0+0x40) ++#define ARM_0_BELL1 HW_REGISTER_RW(ARM_SBM_OWN0+0x44) ++#define ARM_0_BELL2 HW_REGISTER_RW(ARM_SBM_OWN0+0x48) ++#define ARM_0_BELL3 HW_REGISTER_RW(ARM_SBM_OWN0+0x4C) ++/* MAILBOX 0 access in Owner 0 area */ ++/* Some addresses should ONLY be used by owner 0 */ ++#define ARM_0_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) */ ++#define ARM_0_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) Normal read */ ++#define ARM_0_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN0+0x90) /* none-pop read */ ++#define ARM_0_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN0+0x94) /* Sender read (only LS 2 bits) */ ++#define ARM_0_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN0+0x98) /* Status read */ ++#define ARM_0_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0x9C) /* Config read/write */ ++/* MAILBOX 1 access in Owner 0 area */ ++/* Owner 0 should only WRITE to this mailbox */ ++#define ARM_0_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) /* .. 0xAC (4 locations) */ ++/*#define ARM_0_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_0_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_0_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */ ++#define ARM_0_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN0+0xB8) /* Status read */ ++/*#define ARM_0_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */ ++/* General SEM, BELL, MAIL config/status */ ++#define ARM_0_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE0) /* semaphore clear/debug register */ ++#define ARM_0_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE4) /* Doorbells clear/debug register */ ++#define ARM_0_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xF8) /* ALL interrupts */ ++#define ARM_0_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xFC) /* IRQS pending for owner 0 */ ++ ++/* Semaphores, Doorbells, Mailboxes Owner 1 */ ++#define ARM_1_SEMS HW_REGISTER_RW(ARM_SBM_OWN1+0x00) ++#define ARM_1_SEM0 HW_REGISTER_RW(ARM_SBM_OWN1+0x00) ++#define ARM_1_SEM1 HW_REGISTER_RW(ARM_SBM_OWN1+0x04) ++#define ARM_1_SEM2 HW_REGISTER_RW(ARM_SBM_OWN1+0x08) ++#define ARM_1_SEM3 HW_REGISTER_RW(ARM_SBM_OWN1+0x0C) ++#define ARM_1_SEM4 HW_REGISTER_RW(ARM_SBM_OWN1+0x10) ++#define ARM_1_SEM5 HW_REGISTER_RW(ARM_SBM_OWN1+0x14) ++#define ARM_1_SEM6 HW_REGISTER_RW(ARM_SBM_OWN1+0x18) ++#define ARM_1_SEM7 HW_REGISTER_RW(ARM_SBM_OWN1+0x1C) ++#define ARM_1_BELL0 HW_REGISTER_RW(ARM_SBM_OWN1+0x40) ++#define ARM_1_BELL1 HW_REGISTER_RW(ARM_SBM_OWN1+0x44) ++#define ARM_1_BELL2 HW_REGISTER_RW(ARM_SBM_OWN1+0x48) ++#define ARM_1_BELL3 HW_REGISTER_RW(ARM_SBM_OWN1+0x4C) ++/* MAILBOX 0 access in Owner 0 area */ ++/* Owner 1 should only WRITE to this mailbox */ ++#define ARM_1_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0x80) /* .. 0x8C (4 locations) */ ++/*#define ARM_1_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */ ++#define ARM_1_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN1+0x98) /* Status read */ ++/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */ ++/* MAILBOX 1 access in Owner 0 area */ ++#define ARM_1_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) */ ++#define ARM_1_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) Normal read */ ++#define ARM_1_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN1+0xB0) /* none-pop read */ ++#define ARM_1_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN1+0xB4) /* Sender read (only LS 2 bits) */ ++#define ARM_1_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN1+0xB8) /* Status read */ ++#define ARM_1_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0xBC) ++/* General SEM, BELL, MAIL config/status */ ++#define ARM_1_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE0) /* semaphore clear/debug register */ ++#define ARM_1_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE4) /* Doorbells clear/debug register */ ++#define ARM_1_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xFC) /* IRQS pending for owner 1 */ ++#define ARM_1_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xF8) /* ALL interrupts */ ++ ++/* Semaphores, Doorbells, Mailboxes Owner 2 */ ++#define ARM_2_SEMS HW_REGISTER_RW(ARM_SBM_OWN2+0x00) ++#define ARM_2_SEM0 HW_REGISTER_RW(ARM_SBM_OWN2+0x00) ++#define ARM_2_SEM1 HW_REGISTER_RW(ARM_SBM_OWN2+0x04) ++#define ARM_2_SEM2 HW_REGISTER_RW(ARM_SBM_OWN2+0x08) ++#define ARM_2_SEM3 HW_REGISTER_RW(ARM_SBM_OWN2+0x0C) ++#define ARM_2_SEM4 HW_REGISTER_RW(ARM_SBM_OWN2+0x10) ++#define ARM_2_SEM5 HW_REGISTER_RW(ARM_SBM_OWN2+0x14) ++#define ARM_2_SEM6 HW_REGISTER_RW(ARM_SBM_OWN2+0x18) ++#define ARM_2_SEM7 HW_REGISTER_RW(ARM_SBM_OWN2+0x1C) ++#define ARM_2_BELL0 HW_REGISTER_RW(ARM_SBM_OWN2+0x40) ++#define ARM_2_BELL1 HW_REGISTER_RW(ARM_SBM_OWN2+0x44) ++#define ARM_2_BELL2 HW_REGISTER_RW(ARM_SBM_OWN2+0x48) ++#define ARM_2_BELL3 HW_REGISTER_RW(ARM_SBM_OWN2+0x4C) ++/* MAILBOX 0 access in Owner 2 area */ ++/* Owner 2 should only WRITE to this mailbox */ ++#define ARM_2_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0x80) /* .. 0x8C (4 locations) */ ++/*#define ARM_2_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN2+0x80) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94) */ /* DO NOT USE THIS !!!!! */ ++#define ARM_2_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN2+0x98) /* Status read */ ++/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C) */ /* DO NOT USE THIS !!!!! */ ++/* MAILBOX 1 access in Owner 2 area */ ++/* Owner 2 should only WRITE to this mailbox */ ++#define ARM_2_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) /* .. 0xAC (4 locations) */ ++/*#define ARM_2_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_2_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_2_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */ ++#define ARM_2_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN2+0xB8) /* Status read */ ++/*#define ARM_2_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */ ++/* General SEM, BELL, MAIL config/status */ ++#define ARM_2_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE0) /* semaphore clear/debug register */ ++#define ARM_2_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE4) /* Doorbells clear/debug register */ ++#define ARM_2_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xFC) /* IRQS pending for owner 2 */ ++#define ARM_2_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xF8) /* ALL interrupts */ ++ ++/* Semaphores, Doorbells, Mailboxes Owner 3 */ ++#define ARM_3_SEMS HW_REGISTER_RW(ARM_SBM_OWN3+0x00) ++#define ARM_3_SEM0 HW_REGISTER_RW(ARM_SBM_OWN3+0x00) ++#define ARM_3_SEM1 HW_REGISTER_RW(ARM_SBM_OWN3+0x04) ++#define ARM_3_SEM2 HW_REGISTER_RW(ARM_SBM_OWN3+0x08) ++#define ARM_3_SEM3 HW_REGISTER_RW(ARM_SBM_OWN3+0x0C) ++#define ARM_3_SEM4 HW_REGISTER_RW(ARM_SBM_OWN3+0x10) ++#define ARM_3_SEM5 HW_REGISTER_RW(ARM_SBM_OWN3+0x14) ++#define ARM_3_SEM6 HW_REGISTER_RW(ARM_SBM_OWN3+0x18) ++#define ARM_3_SEM7 HW_REGISTER_RW(ARM_SBM_OWN3+0x1C) ++#define ARM_3_BELL0 HW_REGISTER_RW(ARM_SBM_OWN3+0x40) ++#define ARM_3_BELL1 HW_REGISTER_RW(ARM_SBM_OWN3+0x44) ++#define ARM_3_BELL2 HW_REGISTER_RW(ARM_SBM_OWN3+0x48) ++#define ARM_3_BELL3 HW_REGISTER_RW(ARM_SBM_OWN3+0x4C) ++/* MAILBOX 0 access in Owner 3 area */ ++/* Owner 3 should only WRITE to this mailbox */ ++#define ARM_3_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0x80) /* .. 0x8C (4 locations) */ ++/*#define ARM_3_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN3+0x80) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94) */ /* DO NOT USE THIS !!!!! */ ++#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98) /* Status read */ ++/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C) */ /* DO NOT USE THIS !!!!! */ ++/* MAILBOX 1 access in Owner 3 area */ ++/* Owner 3 should only WRITE to this mailbox */ ++#define ARM_3_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) /* .. 0xAC (4 locations) */ ++/*#define ARM_3_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_3_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */ ++/*#define ARM_3_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */ ++#define ARM_3_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN3+0xB8) /* Status read */ ++/*#define ARM_3_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */ ++/* General SEM, BELL, MAIL config/status */ ++#define ARM_3_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE0) /* semaphore clear/debug register */ ++#define ARM_3_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE4) /* Doorbells clear/debug register */ ++#define ARM_3_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xFC) /* IRQS pending for owner 3 */ ++#define ARM_3_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xF8) /* ALL interrupts */ ++ ++ ++ ++/* Mailbox flags. Valid for all owners */ ++ ++/* Mailbox status register (...0x98) */ ++#define ARM_MS_FULL 0x80000000 ++#define ARM_MS_EMPTY 0x40000000 ++#define ARM_MS_LEVEL 0x400000FF /* Max. value depdnds on mailbox depth parameter */ ++ ++/* MAILBOX config/status register (...0x9C) */ ++/* ANY write to this register clears the error bits! */ ++#define ARM_MC_IHAVEDATAIRQEN 0x00000001 /* mailbox irq enable: has data */ ++#define ARM_MC_IHAVESPACEIRQEN 0x00000002 /* mailbox irq enable: has space */ ++#define ARM_MC_OPPISEMPTYIRQEN 0x00000004 /* mailbox irq enable: Opp. is empty */ ++#define ARM_MC_MAIL_CLEAR 0x00000008 /* mailbox clear write 1, then 0 */ ++#define ARM_MC_IHAVEDATAIRQPEND 0x00000010 /* mailbox irq pending: has space */ ++#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */ ++#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */ ++/* Bit 7 is unused */ ++#define ARM_MC_ERRNOOWN 0x00000100 /* error : none owner read from mailbox */ ++#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */ ++#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */ ++ ++/* Semaphore clear/debug register (...0xE0) */ ++#define ARM_SD_OWN0 0x00000003 /* Owner of sem 0 */ ++#define ARM_SD_OWN1 0x0000000C /* Owner of sem 1 */ ++#define ARM_SD_OWN2 0x00000030 /* Owner of sem 2 */ ++#define ARM_SD_OWN3 0x000000C0 /* Owner of sem 3 */ ++#define ARM_SD_OWN4 0x00000300 /* Owner of sem 4 */ ++#define ARM_SD_OWN5 0x00000C00 /* Owner of sem 5 */ ++#define ARM_SD_OWN6 0x00003000 /* Owner of sem 6 */ ++#define ARM_SD_OWN7 0x0000C000 /* Owner of sem 7 */ ++#define ARM_SD_SEM0 0x00010000 /* Status of sem 0 */ ++#define ARM_SD_SEM1 0x00020000 /* Status of sem 1 */ ++#define ARM_SD_SEM2 0x00040000 /* Status of sem 2 */ ++#define ARM_SD_SEM3 0x00080000 /* Status of sem 3 */ ++#define ARM_SD_SEM4 0x00100000 /* Status of sem 4 */ ++#define ARM_SD_SEM5 0x00200000 /* Status of sem 5 */ ++#define ARM_SD_SEM6 0x00400000 /* Status of sem 6 */ ++#define ARM_SD_SEM7 0x00800000 /* Status of sem 7 */ ++ ++/* Doorbells clear/debug register (...0xE4) */ ++#define ARM_BD_OWN0 0x00000003 /* Owner of doorbell 0 */ ++#define ARM_BD_OWN1 0x0000000C /* Owner of doorbell 1 */ ++#define ARM_BD_OWN2 0x00000030 /* Owner of doorbell 2 */ ++#define ARM_BD_OWN3 0x000000C0 /* Owner of doorbell 3 */ ++#define ARM_BD_BELL0 0x00000100 /* Status of doorbell 0 */ ++#define ARM_BD_BELL1 0x00000200 /* Status of doorbell 1 */ ++#define ARM_BD_BELL2 0x00000400 /* Status of doorbell 2 */ ++#define ARM_BD_BELL3 0x00000800 /* Status of doorbell 3 */ ++ ++/* MY IRQS register (...0xF8) */ ++#define ARM_MYIRQ_BELL 0x00000001 /* This owner has a doorbell IRQ */ ++#define ARM_MYIRQ_MAIL 0x00000002 /* This owner has a mailbox IRQ */ ++ ++/* ALL IRQS register (...0xF8) */ ++#define ARM_AIS_BELL0 0x00000001 /* Doorbell 0 IRQ pending */ ++#define ARM_AIS_BELL1 0x00000002 /* Doorbell 1 IRQ pending */ ++#define ARM_AIS_BELL2 0x00000004 /* Doorbell 2 IRQ pending */ ++#define ARM_AIS_BELL3 0x00000008 /* Doorbell 3 IRQ pending */ ++#define ARM_AIS0_HAVEDATA 0x00000010 /* MAIL 0 has data IRQ pending */ ++#define ARM_AIS0_HAVESPAC 0x00000020 /* MAIL 0 has space IRQ pending */ ++#define ARM_AIS0_OPPEMPTY 0x00000040 /* MAIL 0 opposite is empty IRQ */ ++#define ARM_AIS1_HAVEDATA 0x00000080 /* MAIL 1 has data IRQ pending */ ++#define ARM_AIS1_HAVESPAC 0x00000100 /* MAIL 1 has space IRQ pending */ ++#define ARM_AIS1_OPPEMPTY 0x00000200 /* MAIL 1 opposite is empty IRQ */ ++/* Note that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */ ++/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */ ++/* */ ++/* ARM JTAG BASH */ ++/* */ ++#define AJB_BASE 0x7e2000c0 ++ ++#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00) ++#define AJB_BITS0 0x000000 ++#define AJB_BITS4 0x000004 ++#define AJB_BITS8 0x000008 ++#define AJB_BITS12 0x00000C ++#define AJB_BITS16 0x000010 ++#define AJB_BITS20 0x000014 ++#define AJB_BITS24 0x000018 ++#define AJB_BITS28 0x00001C ++#define AJB_BITS32 0x000020 ++#define AJB_BITS34 0x000022 ++#define AJB_OUT_MS 0x000040 ++#define AJB_OUT_LS 0x000000 ++#define AJB_INV_CLK 0x000080 ++#define AJB_D0_RISE 0x000100 ++#define AJB_D0_FALL 0x000000 ++#define AJB_D1_RISE 0x000200 ++#define AJB_D1_FALL 0x000000 ++#define AJB_IN_RISE 0x000400 ++#define AJB_IN_FALL 0x000000 ++#define AJB_ENABLE 0x000800 ++#define AJB_HOLD0 0x000000 ++#define AJB_HOLD1 0x001000 ++#define AJB_HOLD2 0x002000 ++#define AJB_HOLD3 0x003000 ++#define AJB_RESETN 0x004000 ++#define AJB_CLKSHFT 16 ++#define AJB_BUSY 0x80000000 ++#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04) ++#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08) ++#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c) ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/arm_power.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/arm_power.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/arm_power.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/arm_power.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,60 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/include/mach/arm_power.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _ARM_POWER_H ++#define _ARM_POWER_H ++ ++/* Use meaningful names on each side */ ++#ifdef __VIDEOCORE__ ++#define PREFIX(x) ARM_##x ++#else ++#define PREFIX(x) BCM_##x ++#endif ++ ++enum { ++ PREFIX(POWER_SDCARD_BIT), ++ PREFIX(POWER_UART_BIT), ++ PREFIX(POWER_MINIUART_BIT), ++ PREFIX(POWER_USB_BIT), ++ PREFIX(POWER_I2C0_BIT), ++ PREFIX(POWER_I2C1_BIT), ++ PREFIX(POWER_I2C2_BIT), ++ PREFIX(POWER_SPI_BIT), ++ PREFIX(POWER_CCP2TX_BIT), ++ ++ PREFIX(POWER_MAX) ++}; ++ ++enum { ++ PREFIX(POWER_SDCARD) = (1 << PREFIX(POWER_SDCARD_BIT)), ++ PREFIX(POWER_UART) = (1 << PREFIX(POWER_UART_BIT)), ++ PREFIX(POWER_MINIUART) = (1 << PREFIX(POWER_MINIUART_BIT)), ++ PREFIX(POWER_USB) = (1 << PREFIX(POWER_USB_BIT)), ++ PREFIX(POWER_I2C0) = (1 << PREFIX(POWER_I2C0_BIT)), ++ PREFIX(POWER_I2C1_MASK) = (1 << PREFIX(POWER_I2C1_BIT)), ++ PREFIX(POWER_I2C2_MASK) = (1 << PREFIX(POWER_I2C2_BIT)), ++ PREFIX(POWER_SPI_MASK) = (1 << PREFIX(POWER_SPI_BIT)), ++ PREFIX(POWER_CCP2TX_MASK) = (1 << PREFIX(POWER_CCP2TX_BIT)), ++ ++ PREFIX(POWER_MASK) = (1 << PREFIX(POWER_MAX)) - 1, ++ PREFIX(POWER_NONE) = 0 ++}; ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/clkdev.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/clkdev.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/clkdev.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/clkdev.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,7 @@ ++#ifndef __ASM_MACH_CLKDEV_H ++#define __ASM_MACH_CLKDEV_H ++ ++#define __clk_get(clk) ({ 1; }) ++#define __clk_put(clk) do { } while (0) ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/debug-macro.S bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/debug-macro.S +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/debug-macro.S 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/debug-macro.S 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,22 @@ ++/* arch/arm/mach-bcm2708/include/mach/debug-macro.S ++ * ++ * Debugging macro include header ++ * ++ * Copyright (C) 2010 Broadcom ++ * Copyright (C) 1994-1999 Russell King ++ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++*/ ++ ++#include ++ ++ .macro addruart, rp, rv, tmp ++ ldr \rp, =UART0_BASE ++ ldr \rv, =IO_ADDRESS(UART0_BASE) ++ .endm ++ ++#include +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/dma.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/dma.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/dma.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/dma.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,84 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/include/mach/dma.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++#ifndef _MACH_BCM2708_DMA_H ++#define _MACH_BCM2708_DMA_H ++ ++#define BCM_DMAMAN_DRIVER_NAME "bcm2708_dma" ++ ++/* DMA CS Control and Status bits */ ++#define BCM2708_DMA_ACTIVE (1 << 0) ++#define BCM2708_DMA_INT (1 << 2) ++#define BCM2708_DMA_ISPAUSED (1 << 4) /* Pause requested or not active */ ++#define BCM2708_DMA_ISHELD (1 << 5) /* Is held by DREQ flow control */ ++#define BCM2708_DMA_ERR (1 << 8) ++#define BCM2708_DMA_ABORT (1 << 30) /* stop current CB, go to next, WO */ ++#define BCM2708_DMA_RESET (1 << 31) /* WO, self clearing */ ++ ++/* DMA control block "info" field bits */ ++#define BCM2708_DMA_INT_EN (1 << 0) ++#define BCM2708_DMA_TDMODE (1 << 1) ++#define BCM2708_DMA_WAIT_RESP (1 << 3) ++#define BCM2708_DMA_D_INC (1 << 4) ++#define BCM2708_DMA_D_WIDTH (1 << 5) ++#define BCM2708_DMA_D_DREQ (1 << 6) ++#define BCM2708_DMA_S_INC (1 << 8) ++#define BCM2708_DMA_S_WIDTH (1 << 9) ++#define BCM2708_DMA_S_DREQ (1 << 10) ++ ++#define BCM2708_DMA_BURST(x) (((x)&0xf) << 12) ++#define BCM2708_DMA_PER_MAP(x) ((x) << 16) ++#define BCM2708_DMA_WAITS(x) (((x)&0x1f) << 21) ++ ++#define BCM2708_DMA_DREQ_EMMC 11 ++#define BCM2708_DMA_DREQ_SDHOST 13 ++ ++#define BCM2708_DMA_CS 0x00 /* Control and Status */ ++#define BCM2708_DMA_ADDR 0x04 ++/* the current control block appears in the following registers - read only */ ++#define BCM2708_DMA_INFO 0x08 ++#define BCM2708_DMA_NEXTCB 0x1C ++#define BCM2708_DMA_DEBUG 0x20 ++ ++#define BCM2708_DMA4_CS (BCM2708_DMA_CHAN(4)+BCM2708_DMA_CS) ++#define BCM2708_DMA4_ADDR (BCM2708_DMA_CHAN(4)+BCM2708_DMA_ADDR) ++ ++#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w)) ++ ++struct bcm2708_dma_cb { ++ unsigned long info; ++ unsigned long src; ++ unsigned long dst; ++ unsigned long length; ++ unsigned long stride; ++ unsigned long next; ++ unsigned long pad[2]; ++}; ++ ++extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len); ++extern void bcm_dma_start(void __iomem *dma_chan_base, ++ dma_addr_t control_block); ++extern void bcm_dma_wait_idle(void __iomem *dma_chan_base); ++extern int /*rc*/ bcm_dma_abort(void __iomem *dma_chan_base); ++ ++/* When listing features we can ask for when allocating DMA channels give ++ those with higher priority smaller ordinal numbers */ ++#define BCM_DMA_FEATURE_FAST_ORD 0 ++#define BCM_DMA_FEATURE_FAST (1< ++ ++ .macro disable_fiq ++ .endm ++ ++ .macro get_irqnr_preamble, base, tmp ++ ldr \base, =IO_ADDRESS(ARMCTRL_IC_BASE) ++ .endm ++ ++ .macro arch_ret_to_user, tmp1, tmp2 ++ .endm ++ ++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ++ /* get masked status */ ++ ldr \irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)] ++ mov \irqnr, #(ARM_IRQ0_BASE + 31) ++ and \tmp, \irqstat, #0x300 @ save bits 8 and 9 ++ /* clear bits 8 and 9, and test */ ++ bics \irqstat, \irqstat, #0x300 ++ bne 1010f ++ ++ tst \tmp, #0x100 ++ ldrne \irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)] ++ movne \irqnr, #(ARM_IRQ1_BASE + 31) ++ @ Mask out the interrupts also present in PEND0 - see SW-5809 ++ bicne \irqstat, #((1<<7) | (1<<9) | (1<<10)) ++ bicne \irqstat, #((1<<18) | (1<<19)) ++ bne 1010f ++ ++ tst \tmp, #0x200 ++ ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)] ++ movne \irqnr, #(ARM_IRQ2_BASE + 31) ++ @ Mask out the interrupts also present in PEND0 - see SW-5809 ++ bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25)) ++ bicne \irqstat, #((1<<30)) ++ beq 1020f ++ ++1010: ++ @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1)) ++ @ N.B. CLZ is an ARM5 instruction. ++ sub \tmp, \irqstat, #1 ++ eor \irqstat, \irqstat, \tmp ++ clz \tmp, \irqstat ++ sub \irqnr, \tmp ++ ++1020: @ EQ will be set if no irqs pending ++ ++ .endm +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/frc.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/frc.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/frc.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/frc.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,38 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/timex.h ++ * ++ * BCM2708 free running counter (timer) ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _MACH_FRC_H ++#define _MACH_FRC_H ++ ++#define FRC_TICK_RATE (1000000) ++ ++/*! Free running counter incrementing at the CLOCK_TICK_RATE ++ (slightly faster than frc_clock_ticks63() ++ */ ++extern unsigned long frc_clock_ticks32(void); ++ ++/*! Free running counter incrementing at the CLOCK_TICK_RATE ++ * Note - top bit should be ignored (see cnt32_to_63) ++ */ ++extern unsigned long long frc_clock_ticks63(void); ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/gpio.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/gpio.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/gpio.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/gpio.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,48 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/gpio.h ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#ifndef __ASM_ARCH_GPIO_H ++#define __ASM_ARCH_GPIO_H ++ ++#define ARCH_NR_GPIOS 54 // number of gpio lines ++ ++#include ++ ++ ++#ifdef CONFIG_GPIOLIB ++ ++static inline int gpio_get_value(unsigned gpio) ++{ ++ return __gpio_get_value(gpio); ++} ++ ++static inline void gpio_set_value(unsigned gpio, int value) ++{ ++ __gpio_set_value(gpio, value); ++} ++ ++static inline int gpio_cansleep(unsigned gpio) ++{ ++ return __gpio_cansleep(gpio); ++} ++ ++static inline int gpio_to_irq(unsigned gpio) ++{ ++ WARN_ON(1); ++ return -ENOSYS; ++} ++ ++static inline int irq_to_gpio(unsigned int irq) ++{ ++ WARN_ON(1); ++ return -EINVAL; ++} ++ ++#endif /* CONFIG_GPIOLIB */ ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/hardware.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/hardware.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/hardware.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/hardware.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,28 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/hardware.h ++ * ++ * This file contains the hardware definitions of the BCM2708 devices. ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_HARDWARE_H ++#define __ASM_ARCH_HARDWARE_H ++ ++#include ++#include ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/io.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/io.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/io.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/io.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,28 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/io.h ++ * ++ * Copyright (C) 2003 ARM Limited ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARM_ARCH_IO_H ++#define __ASM_ARM_ARCH_IO_H ++ ++#define IO_SPACE_LIMIT 0xffffffff ++ ++#define __io(a) __typesafe_io(a) ++#define __mem_pci(a) (a) ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/irqs.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/irqs.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/irqs.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/irqs.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,190 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/irqs.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * Copyright (C) 2003 ARM Limited ++ * Copyright (C) 2000 Deep Blue Solutions Ltd. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _BCM2708_IRQS_H_ ++#define _BCM2708_IRQS_H_ ++ ++#include ++ ++/* ++ * IRQ interrupts definitions are the same as the INT definitions ++ * held within platform.h ++ */ ++#define IRQ_ARMCTRL_START 0 ++#define IRQ_TIMER0 (IRQ_ARMCTRL_START + INTERRUPT_TIMER0) ++#define IRQ_TIMER1 (IRQ_ARMCTRL_START + INTERRUPT_TIMER1) ++#define IRQ_TIMER2 (IRQ_ARMCTRL_START + INTERRUPT_TIMER2) ++#define IRQ_TIMER3 (IRQ_ARMCTRL_START + INTERRUPT_TIMER3) ++#define IRQ_CODEC0 (IRQ_ARMCTRL_START + INTERRUPT_CODEC0) ++#define IRQ_CODEC1 (IRQ_ARMCTRL_START + INTERRUPT_CODEC1) ++#define IRQ_CODEC2 (IRQ_ARMCTRL_START + INTERRUPT_CODEC2) ++#define IRQ_JPEG (IRQ_ARMCTRL_START + INTERRUPT_JPEG) ++#define IRQ_ISP (IRQ_ARMCTRL_START + INTERRUPT_ISP) ++#define IRQ_USB (IRQ_ARMCTRL_START + INTERRUPT_USB) ++#define IRQ_3D (IRQ_ARMCTRL_START + INTERRUPT_3D) ++#define IRQ_TRANSPOSER (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER) ++#define IRQ_MULTICORESYNC0 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0) ++#define IRQ_MULTICORESYNC1 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1) ++#define IRQ_MULTICORESYNC2 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2) ++#define IRQ_MULTICORESYNC3 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3) ++#define IRQ_DMA0 (IRQ_ARMCTRL_START + INTERRUPT_DMA0) ++#define IRQ_DMA1 (IRQ_ARMCTRL_START + INTERRUPT_DMA1) ++#define IRQ_DMA2 (IRQ_ARMCTRL_START + INTERRUPT_DMA2) ++#define IRQ_DMA3 (IRQ_ARMCTRL_START + INTERRUPT_DMA3) ++#define IRQ_DMA4 (IRQ_ARMCTRL_START + INTERRUPT_DMA4) ++#define IRQ_DMA5 (IRQ_ARMCTRL_START + INTERRUPT_DMA5) ++#define IRQ_DMA6 (IRQ_ARMCTRL_START + INTERRUPT_DMA6) ++#define IRQ_DMA7 (IRQ_ARMCTRL_START + INTERRUPT_DMA7) ++#define IRQ_DMA8 (IRQ_ARMCTRL_START + INTERRUPT_DMA8) ++#define IRQ_DMA9 (IRQ_ARMCTRL_START + INTERRUPT_DMA9) ++#define IRQ_DMA10 (IRQ_ARMCTRL_START + INTERRUPT_DMA10) ++#define IRQ_DMA11 (IRQ_ARMCTRL_START + INTERRUPT_DMA11) ++#define IRQ_DMA12 (IRQ_ARMCTRL_START + INTERRUPT_DMA12) ++#define IRQ_AUX (IRQ_ARMCTRL_START + INTERRUPT_AUX) ++#define IRQ_ARM (IRQ_ARMCTRL_START + INTERRUPT_ARM) ++#define IRQ_VPUDMA (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA) ++#define IRQ_HOSTPORT (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT) ++#define IRQ_VIDEOSCALER (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER) ++#define IRQ_CCP2TX (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX) ++#define IRQ_SDC (IRQ_ARMCTRL_START + INTERRUPT_SDC) ++#define IRQ_DSI0 (IRQ_ARMCTRL_START + INTERRUPT_DSI0) ++#define IRQ_AVE (IRQ_ARMCTRL_START + INTERRUPT_AVE) ++#define IRQ_CAM0 (IRQ_ARMCTRL_START + INTERRUPT_CAM0) ++#define IRQ_CAM1 (IRQ_ARMCTRL_START + INTERRUPT_CAM1) ++#define IRQ_HDMI0 (IRQ_ARMCTRL_START + INTERRUPT_HDMI0) ++#define IRQ_HDMI1 (IRQ_ARMCTRL_START + INTERRUPT_HDMI1) ++#define IRQ_PIXELVALVE1 (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1) ++#define IRQ_I2CSPISLV (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV) ++#define IRQ_DSI1 (IRQ_ARMCTRL_START + INTERRUPT_DSI1) ++#define IRQ_PWA0 (IRQ_ARMCTRL_START + INTERRUPT_PWA0) ++#define IRQ_PWA1 (IRQ_ARMCTRL_START + INTERRUPT_PWA1) ++#define IRQ_CPR (IRQ_ARMCTRL_START + INTERRUPT_CPR) ++#define IRQ_SMI (IRQ_ARMCTRL_START + INTERRUPT_SMI) ++#define IRQ_GPIO0 (IRQ_ARMCTRL_START + INTERRUPT_GPIO0) ++#define IRQ_GPIO1 (IRQ_ARMCTRL_START + INTERRUPT_GPIO1) ++#define IRQ_GPIO2 (IRQ_ARMCTRL_START + INTERRUPT_GPIO2) ++#define IRQ_GPIO3 (IRQ_ARMCTRL_START + INTERRUPT_GPIO3) ++#define IRQ_I2C (IRQ_ARMCTRL_START + INTERRUPT_I2C) ++#define IRQ_SPI (IRQ_ARMCTRL_START + INTERRUPT_SPI) ++#define IRQ_I2SPCM (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM) ++#define IRQ_SDIO (IRQ_ARMCTRL_START + INTERRUPT_SDIO) ++#define IRQ_UART (IRQ_ARMCTRL_START + INTERRUPT_UART) ++#define IRQ_SLIMBUS (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS) ++#define IRQ_VEC (IRQ_ARMCTRL_START + INTERRUPT_VEC) ++#define IRQ_CPG (IRQ_ARMCTRL_START + INTERRUPT_CPG) ++#define IRQ_RNG (IRQ_ARMCTRL_START + INTERRUPT_RNG) ++#define IRQ_ARASANSDIO (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO) ++#define IRQ_AVSPMON (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON) ++ ++#define IRQ_ARM_TIMER (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER) ++#define IRQ_ARM_MAILBOX (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX) ++#define IRQ_ARM_DOORBELL_0 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0) ++#define IRQ_ARM_DOORBELL_1 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1) ++#define IRQ_VPU0_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED) ++#define IRQ_VPU1_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED) ++#define IRQ_ILLEGAL_TYPE0 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0) ++#define IRQ_ILLEGAL_TYPE1 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1) ++#define IRQ_PENDING1 (IRQ_ARMCTRL_START + INTERRUPT_PENDING1) ++#define IRQ_PENDING2 (IRQ_ARMCTRL_START + INTERRUPT_PENDING2) ++ ++/* ++ * FIQ interrupts definitions are the same as the INT definitions. ++ */ ++#define FIQ_TIMER0 INT_TIMER0 ++#define FIQ_TIMER1 INT_TIMER1 ++#define FIQ_TIMER2 INT_TIMER2 ++#define FIQ_TIMER3 INT_TIMER3 ++#define FIQ_CODEC0 INT_CODEC0 ++#define FIQ_CODEC1 INT_CODEC1 ++#define FIQ_CODEC2 INT_CODEC2 ++#define FIQ_JPEG INT_JPEG ++#define FIQ_ISP INT_ISP ++#define FIQ_USB INT_USB ++#define FIQ_3D INT_3D ++#define FIQ_TRANSPOSER INT_TRANSPOSER ++#define FIQ_MULTICORESYNC0 INT_MULTICORESYNC0 ++#define FIQ_MULTICORESYNC1 INT_MULTICORESYNC1 ++#define FIQ_MULTICORESYNC2 INT_MULTICORESYNC2 ++#define FIQ_MULTICORESYNC3 INT_MULTICORESYNC3 ++#define FIQ_DMA0 INT_DMA0 ++#define FIQ_DMA1 INT_DMA1 ++#define FIQ_DMA2 INT_DMA2 ++#define FIQ_DMA3 INT_DMA3 ++#define FIQ_DMA4 INT_DMA4 ++#define FIQ_DMA5 INT_DMA5 ++#define FIQ_DMA6 INT_DMA6 ++#define FIQ_DMA7 INT_DMA7 ++#define FIQ_DMA8 INT_DMA8 ++#define FIQ_DMA9 INT_DMA9 ++#define FIQ_DMA10 INT_DMA10 ++#define FIQ_DMA11 INT_DMA11 ++#define FIQ_DMA12 INT_DMA12 ++#define FIQ_AUX INT_AUX ++#define FIQ_ARM INT_ARM ++#define FIQ_VPUDMA INT_VPUDMA ++#define FIQ_HOSTPORT INT_HOSTPORT ++#define FIQ_VIDEOSCALER INT_VIDEOSCALER ++#define FIQ_CCP2TX INT_CCP2TX ++#define FIQ_SDC INT_SDC ++#define FIQ_DSI0 INT_DSI0 ++#define FIQ_AVE INT_AVE ++#define FIQ_CAM0 INT_CAM0 ++#define FIQ_CAM1 INT_CAM1 ++#define FIQ_HDMI0 INT_HDMI0 ++#define FIQ_HDMI1 INT_HDMI1 ++#define FIQ_PIXELVALVE1 INT_PIXELVALVE1 ++#define FIQ_I2CSPISLV INT_I2CSPISLV ++#define FIQ_DSI1 INT_DSI1 ++#define FIQ_PWA0 INT_PWA0 ++#define FIQ_PWA1 INT_PWA1 ++#define FIQ_CPR INT_CPR ++#define FIQ_SMI INT_SMI ++#define FIQ_GPIO0 INT_GPIO0 ++#define FIQ_GPIO1 INT_GPIO1 ++#define FIQ_GPIO2 INT_GPIO2 ++#define FIQ_GPIO3 INT_GPIO3 ++#define FIQ_I2C INT_I2C ++#define FIQ_SPI INT_SPI ++#define FIQ_I2SPCM INT_I2SPCM ++#define FIQ_SDIO INT_SDIO ++#define FIQ_UART INT_UART ++#define FIQ_SLIMBUS INT_SLIMBUS ++#define FIQ_VEC INT_VEC ++#define FIQ_CPG INT_CPG ++#define FIQ_RNG INT_RNG ++#define FIQ_ARASANSDIO INT_ARASANSDIO ++#define FIQ_AVSPMON INT_AVSPMON ++ ++#define FIQ_ARM_TIMER INT_ARM_TIMER ++#define FIQ_ARM_MAILBOX INT_ARM_MAILBOX ++#define FIQ_ARM_DOORBELL_0 INT_ARM_DOORBELL_0 ++#define FIQ_ARM_DOORBELL_1 INT_ARM_DOORBELL_1 ++#define FIQ_VPU0_HALTED INT_VPU0_HALTED ++#define FIQ_VPU1_HALTED INT_VPU1_HALTED ++#define FIQ_ILLEGAL_TYPE0 INT_ILLEGAL_TYPE0 ++#define FIQ_ILLEGAL_TYPE1 INT_ILLEGAL_TYPE1 ++#define FIQ_PENDING1 INT_PENDING1 ++#define FIQ_PENDING2 INT_PENDING2 ++ ++#define NR_IRQS (64 + 21) ++ ++#endif /* _BCM2708_IRQS_H_ */ +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/memory.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/memory.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/memory.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/memory.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,64 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/memory.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_MEMORY_H ++#define __ASM_ARCH_MEMORY_H ++ ++/* Memory overview: ++ ++ [ARMcore] <--virtual addr--> ++ [ARMmmu] <--physical addr--> ++ [GERTmap] <--bus add--> ++ [VCperiph] ++ ++*/ ++ ++/* ++ * Physical DRAM offset. ++ */ ++#define PLAT_PHYS_OFFSET UL(0x00000000) ++#define VC_ARMMEM_OFFSET UL(0x00000000) /* offset in VC of ARM memory */ ++ ++#ifdef CONFIG_BCM2708_NOL2CACHE ++ #define _REAL_BUS_OFFSET UL(0xC0000000) /* don't use L1 or L2 caches */ ++#else ++ #define _REAL_BUS_OFFSET UL(0x40000000) /* use L2 cache */ ++#endif ++ ++/* We're using the memory at 64M in the VideoCore for Linux - this adjustment ++ * will provide the offset into this area as well as setting the bits that ++ * stop the L1 and L2 cache from being used ++ * ++ * WARNING: this only works because the ARM is given memory at a fixed location ++ * (ARMMEM_OFFSET) ++ */ ++#define BUS_OFFSET (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET) ++#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) ++#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) ++#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PLAT_PHYS_OFFSET)) ++#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PLAT_PHYS_OFFSET)) ++ ++/* ++ * Consistent DMA area set to 2M. Framebuffer now allocated on host ++ */ ++ ++ ++#define CONSISTENT_DMA_SIZE 0x00200000 ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/platform.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/platform.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/platform.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/platform.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,213 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/platform.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _BCM2708_PLATFORM_H ++#define _BCM2708_PLATFORM_H ++ ++ ++/* macros to get at IO space when running virtually */ ++#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) ++ ++#define __io_address(a) __io(IO_ADDRESS(a)) ++ ++ ++/* ++ * SDRAM ++ */ ++#define BCM2708_SDRAM_BASE 0x00000000 ++ ++/* ++ * Logic expansion modules ++ * ++ */ ++ ++ ++/* ------------------------------------------------------------------------ ++ * BCM2708 ARMCTRL Registers ++ * ------------------------------------------------------------------------ ++ */ ++ ++#define HW_REGISTER_RW(addr) (addr) ++#define HW_REGISTER_RO(addr) (addr) ++ ++#include "arm_control.h" ++#undef ARM_BASE ++ ++/* ++ * Definitions and addresses for the ARM CONTROL logic ++ * This file is manually generated. ++ */ ++ ++#define BCM2708_PERI_BASE 0x20000000 ++#define ST_BASE (BCM2708_PERI_BASE + 0x3000) /* System Timer */ ++#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */ ++#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */ ++#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */ ++#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */ ++#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */ ++#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */ ++#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */ ++#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */ ++#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */ ++#define EMMC_BASE (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */ ++#define SMI_BASE (BCM2708_PERI_BASE + 0x600000) /* SMI */ ++#define BSC1_BASE (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */ ++#define USB_BASE (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */ ++#define MCORE_BASE (BCM2708_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/ ++ ++#define ARMCTRL_BASE (ARM_BASE + 0x000) ++#define ARMCTRL_IC_BASE (ARM_BASE + 0x200) /* ARM interrupt controller */ ++#define ARMCTRL_TIMER0_1_BASE (ARM_BASE + 0x400) /* Timer 0 and 1 */ ++#define ARMCTRL_0_SBM_BASE (ARM_BASE + 0x800) /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */ ++ ++ ++/* ++ * Interrupt assignments ++ */ ++ ++#define ARM_IRQ1_BASE 0 ++#define INTERRUPT_TIMER0 (ARM_IRQ1_BASE + 0) ++#define INTERRUPT_TIMER1 (ARM_IRQ1_BASE + 1) ++#define INTERRUPT_TIMER2 (ARM_IRQ1_BASE + 2) ++#define INTERRUPT_TIMER3 (ARM_IRQ1_BASE + 3) ++#define INTERRUPT_CODEC0 (ARM_IRQ1_BASE + 4) ++#define INTERRUPT_CODEC1 (ARM_IRQ1_BASE + 5) ++#define INTERRUPT_CODEC2 (ARM_IRQ1_BASE + 6) ++#define INTERRUPT_VC_JPEG (ARM_IRQ1_BASE + 7) ++#define INTERRUPT_ISP (ARM_IRQ1_BASE + 8) ++#define INTERRUPT_VC_USB (ARM_IRQ1_BASE + 9) ++#define INTERRUPT_VC_3D (ARM_IRQ1_BASE + 10) ++#define INTERRUPT_TRANSPOSER (ARM_IRQ1_BASE + 11) ++#define INTERRUPT_MULTICORESYNC0 (ARM_IRQ1_BASE + 12) ++#define INTERRUPT_MULTICORESYNC1 (ARM_IRQ1_BASE + 13) ++#define INTERRUPT_MULTICORESYNC2 (ARM_IRQ1_BASE + 14) ++#define INTERRUPT_MULTICORESYNC3 (ARM_IRQ1_BASE + 15) ++#define INTERRUPT_DMA0 (ARM_IRQ1_BASE + 16) ++#define INTERRUPT_DMA1 (ARM_IRQ1_BASE + 17) ++#define INTERRUPT_VC_DMA2 (ARM_IRQ1_BASE + 18) ++#define INTERRUPT_VC_DMA3 (ARM_IRQ1_BASE + 19) ++#define INTERRUPT_DMA4 (ARM_IRQ1_BASE + 20) ++#define INTERRUPT_DMA5 (ARM_IRQ1_BASE + 21) ++#define INTERRUPT_DMA6 (ARM_IRQ1_BASE + 22) ++#define INTERRUPT_DMA7 (ARM_IRQ1_BASE + 23) ++#define INTERRUPT_DMA8 (ARM_IRQ1_BASE + 24) ++#define INTERRUPT_DMA9 (ARM_IRQ1_BASE + 25) ++#define INTERRUPT_DMA10 (ARM_IRQ1_BASE + 26) ++#define INTERRUPT_DMA11 (ARM_IRQ1_BASE + 27) ++#define INTERRUPT_DMA12 (ARM_IRQ1_BASE + 28) ++#define INTERRUPT_AUX (ARM_IRQ1_BASE + 29) ++#define INTERRUPT_ARM (ARM_IRQ1_BASE + 30) ++#define INTERRUPT_VPUDMA (ARM_IRQ1_BASE + 31) ++ ++#define ARM_IRQ2_BASE 32 ++#define INTERRUPT_HOSTPORT (ARM_IRQ2_BASE + 0) ++#define INTERRUPT_VIDEOSCALER (ARM_IRQ2_BASE + 1) ++#define INTERRUPT_CCP2TX (ARM_IRQ2_BASE + 2) ++#define INTERRUPT_SDC (ARM_IRQ2_BASE + 3) ++#define INTERRUPT_DSI0 (ARM_IRQ2_BASE + 4) ++#define INTERRUPT_AVE (ARM_IRQ2_BASE + 5) ++#define INTERRUPT_CAM0 (ARM_IRQ2_BASE + 6) ++#define INTERRUPT_CAM1 (ARM_IRQ2_BASE + 7) ++#define INTERRUPT_HDMI0 (ARM_IRQ2_BASE + 8) ++#define INTERRUPT_HDMI1 (ARM_IRQ2_BASE + 9) ++#define INTERRUPT_PIXELVALVE1 (ARM_IRQ2_BASE + 10) ++#define INTERRUPT_I2CSPISLV (ARM_IRQ2_BASE + 11) ++#define INTERRUPT_DSI1 (ARM_IRQ2_BASE + 12) ++#define INTERRUPT_PWA0 (ARM_IRQ2_BASE + 13) ++#define INTERRUPT_PWA1 (ARM_IRQ2_BASE + 14) ++#define INTERRUPT_CPR (ARM_IRQ2_BASE + 15) ++#define INTERRUPT_SMI (ARM_IRQ2_BASE + 16) ++#define INTERRUPT_GPIO0 (ARM_IRQ2_BASE + 17) ++#define INTERRUPT_GPIO1 (ARM_IRQ2_BASE + 18) ++#define INTERRUPT_GPIO2 (ARM_IRQ2_BASE + 19) ++#define INTERRUPT_GPIO3 (ARM_IRQ2_BASE + 20) ++#define INTERRUPT_VC_I2C (ARM_IRQ2_BASE + 21) ++#define INTERRUPT_VC_SPI (ARM_IRQ2_BASE + 22) ++#define INTERRUPT_VC_I2SPCM (ARM_IRQ2_BASE + 23) ++#define INTERRUPT_VC_SDIO (ARM_IRQ2_BASE + 24) ++#define INTERRUPT_VC_UART (ARM_IRQ2_BASE + 25) ++#define INTERRUPT_SLIMBUS (ARM_IRQ2_BASE + 26) ++#define INTERRUPT_VEC (ARM_IRQ2_BASE + 27) ++#define INTERRUPT_CPG (ARM_IRQ2_BASE + 28) ++#define INTERRUPT_RNG (ARM_IRQ2_BASE + 29) ++#define INTERRUPT_VC_ARASANSDIO (ARM_IRQ2_BASE + 30) ++#define INTERRUPT_AVSPMON (ARM_IRQ2_BASE + 31) ++ ++#define ARM_IRQ0_BASE 64 ++#define INTERRUPT_ARM_TIMER (ARM_IRQ0_BASE + 0) ++#define INTERRUPT_ARM_MAILBOX (ARM_IRQ0_BASE + 1) ++#define INTERRUPT_ARM_DOORBELL_0 (ARM_IRQ0_BASE + 2) ++#define INTERRUPT_ARM_DOORBELL_1 (ARM_IRQ0_BASE + 3) ++#define INTERRUPT_VPU0_HALTED (ARM_IRQ0_BASE + 4) ++#define INTERRUPT_VPU1_HALTED (ARM_IRQ0_BASE + 5) ++#define INTERRUPT_ILLEGAL_TYPE0 (ARM_IRQ0_BASE + 6) ++#define INTERRUPT_ILLEGAL_TYPE1 (ARM_IRQ0_BASE + 7) ++#define INTERRUPT_PENDING1 (ARM_IRQ0_BASE + 8) ++#define INTERRUPT_PENDING2 (ARM_IRQ0_BASE + 9) ++#define INTERRUPT_JPEG (ARM_IRQ0_BASE + 10) ++#define INTERRUPT_USB (ARM_IRQ0_BASE + 11) ++#define INTERRUPT_3D (ARM_IRQ0_BASE + 12) ++#define INTERRUPT_DMA2 (ARM_IRQ0_BASE + 13) ++#define INTERRUPT_DMA3 (ARM_IRQ0_BASE + 14) ++#define INTERRUPT_I2C (ARM_IRQ0_BASE + 15) ++#define INTERRUPT_SPI (ARM_IRQ0_BASE + 16) ++#define INTERRUPT_I2SPCM (ARM_IRQ0_BASE + 17) ++#define INTERRUPT_SDIO (ARM_IRQ0_BASE + 18) ++#define INTERRUPT_UART (ARM_IRQ0_BASE + 19) ++#define INTERRUPT_ARASANSDIO (ARM_IRQ0_BASE + 20) ++ ++#define MAXIRQNUM (32 + 32 + 20) ++#define MAXFIQNUM (32 + 32 + 20) ++ ++#define MAX_TIMER 2 ++#define MAX_PERIOD 699050 ++#define TICKS_PER_uSEC 1 ++ ++/* ++ * These are useconds NOT ticks. ++ * ++ */ ++#define mSEC_1 1000 ++#define mSEC_5 (mSEC_1 * 5) ++#define mSEC_10 (mSEC_1 * 10) ++#define mSEC_25 (mSEC_1 * 25) ++#define SEC_1 (mSEC_1 * 1000) ++ ++/* ++ * Watchdog ++ */ ++#define PM_RSTC (PM_BASE+0x1c) ++#define PM_WDOG (PM_BASE+0x24) ++ ++#define PM_WDOG_RESET 0000000000 ++#define PM_PASSWORD 0x5a000000 ++#define PM_WDOG_TIME_SET 0x000fffff ++#define PM_RSTC_WRCFG_CLR 0xffffffcf ++#define PM_RSTC_WRCFG_SET 0x00000030 ++#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 ++#define PM_RSTC_RESET 0x00000102 ++ ++/* AMBA UART clock */ ++#define UART0_CLOCK 3000000 ++ ++ ++#endif ++ ++/* END */ +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/power.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/power.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/power.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/power.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,26 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/power.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This device provides a shared mechanism for controlling the power to ++ * VideoCore subsystems. ++ */ ++ ++#ifndef _MACH_BCM2708_POWER_H ++#define _MACH_BCM2708_POWER_H ++ ++#include ++#include ++ ++typedef unsigned int BCM_POWER_HANDLE_T; ++ ++extern int bcm_power_open(BCM_POWER_HANDLE_T *handle); ++extern int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request); ++extern int bcm_power_close(BCM_POWER_HANDLE_T handle); ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/system.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/system.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/system.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/system.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,53 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/system.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * Copyright (C) 2003 ARM Limited ++ * Copyright (C) 2000 Deep Blue Solutions Ltd ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_SYSTEM_H ++#define __ASM_ARCH_SYSTEM_H ++ ++#include ++#include ++#include ++ ++static inline void arch_idle(void) ++{ ++ /* ++ * This should do all the clock switching ++ * and wait for interrupt tricks ++ */ ++ cpu_do_idle(); ++} ++ ++static inline void arch_reset(char mode, const char *cmd) ++{ ++ uint32_t pm_rstc, pm_wdog; ++ uint32_t timeout = 10; ++ ++ /* Setup watchdog for reset */ ++ pm_rstc = readl(IO_ADDRESS(PM_RSTC)); ++ ++ pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0) ++ pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET; ++ ++ writel(pm_wdog, IO_ADDRESS(PM_WDOG)); ++ writel(pm_rstc, IO_ADDRESS(PM_RSTC)); ++} ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/timex.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/timex.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/timex.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/timex.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,23 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/timex.h ++ * ++ * BCM2708 sysem clock frequency ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#define CLOCK_TICK_RATE (1000000) +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/uncompress.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/uncompress.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/uncompress.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/uncompress.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,84 @@ ++/* ++ * arch/arm/mach-bcn2708/include/mach/uncompress.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * Copyright (C) 2003 ARM Limited ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++ ++#define UART_BAUD 115200 ++ ++#define BCM2708_UART_DR UART0_BASE + UART01x_DR ++#define BCM2708_UART_FR UART0_BASE + UART01x_FR ++#define BCM2708_UART_IBRD UART0_BASE + UART011_IBRD ++#define BCM2708_UART_FBRD UART0_BASE + UART011_FBRD ++#define BCM2708_UART_LCRH UART0_BASE + UART011_LCRH ++#define BCM2708_UART_CR UART0_BASE + UART011_CR ++ ++/* ++ * This does not append a newline ++ */ ++static inline void putc(int c) ++{ ++ while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF) ++ barrier(); ++ ++ __raw_writel(c, BCM2708_UART_DR); ++} ++ ++static inline void flush(void) ++{ ++ int fr; ++ ++ do { ++ fr = __raw_readl(BCM2708_UART_FR); ++ barrier(); ++ } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); ++} ++ ++static inline void arch_decomp_setup(void) ++{ ++ int temp, div, rem, frac; ++ ++ temp = 16 * UART_BAUD; ++ div = UART0_CLOCK / temp; ++ rem = UART0_CLOCK % temp; ++ temp = (8 * rem) / UART_BAUD; ++ frac = (temp >> 1) + (temp & 1); ++ ++ /* Make sure the UART is disabled before we start */ ++ __raw_writel(0, BCM2708_UART_CR); ++ ++ /* Set the baud rate */ ++ __raw_writel(div, BCM2708_UART_IBRD); ++ __raw_writel(frac, BCM2708_UART_FBRD); ++ ++ /* Set the UART to 8n1, FIFO enabled */ ++ __raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH); ++ ++ /* Enable the UART */ ++ __raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE, ++ BCM2708_UART_CR); ++} ++ ++/* ++ * nothing to do ++ */ ++#define arch_decomp_wdog() +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/vcio.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/vcio.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/vcio.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/vcio.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,42 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/vcio.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef _MACH_BCM2708_VCIO_H ++#define _MACH_BCM2708_VCIO_H ++ ++/* Routines to handle I/O via the VideoCore "ARM control" registers ++ * (semaphores, doorbells, mailboxes) ++ */ ++ ++#define BCM_VCIO_DRIVER_NAME "bcm2708_vcio" ++ ++/* Constants shared with the ARM identifying separate mailbox channels */ ++#define MBOX_CHAN_POWER 0 /* for use by the power management interface */ ++#define MBOX_CHAN_FB 1 /* for use by the frame buffer */ ++#define MBOX_CHAN_VUART 2 /* for use by the virtual UART */ ++#define MBOX_CHAN_VCHIQ 3 /* for use by the VCHIQ interface */ ++#define MBOX_CHAN_LEDS 4 /* for use by the leds interface */ ++#define MBOX_CHAN_BUTTONS 5 /* for use by the buttons interface */ ++#define MBOX_CHAN_TOUCH 6 /* for use by the touchscreen interface */ ++#define MBOX_CHAN_COUNT 7 ++ ++extern int /*rc*/ bcm_mailbox_read(unsigned chan, uint32_t *data28); ++extern int /*rc*/ bcm_mailbox_write(unsigned chan, uint32_t data28); ++ ++#endif +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/vc_mem.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/vc_mem.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/vc_mem.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/vc_mem.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,35 @@ ++/***************************************************************************** ++* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#if !defined( VC_MEM_H ) ++#define VC_MEM_H ++ ++#include ++ ++#define VC_MEM_IOC_MAGIC 'v' ++ ++#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) ++#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) ++#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) ++ ++#if defined( __KERNEL__ ) ++#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF ++ ++extern unsigned long mm_vc_mem_phys_addr; ++extern unsigned int mm_vc_mem_size; ++extern int vc_mem_get_current_size( void ); ++#endif ++ ++#endif /* VC_MEM_H */ ++ +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/vmalloc.h bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/vmalloc.h +--- upstream-3.2.21/arch/arm/mach-bcm2708/include/mach/vmalloc.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/include/mach/vmalloc.h 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,20 @@ ++/* ++ * arch/arm/mach-bcm2708/include/mach/vmalloc.h ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#define VMALLOC_END (0xd8000000) +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/Kconfig bootc-3.2.21/arch/arm/mach-bcm2708/Kconfig +--- upstream-3.2.21/arch/arm/mach-bcm2708/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/Kconfig 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,32 @@ ++menu "Broadcom BCM2708 Implementations" ++ depends on ARCH_BCM2708 ++ ++config MACH_BCM2708 ++ bool "Broadcom BCM2708 Development Platform" ++ select CPU_V6 ++ help ++ Include support for the Broadcom(R) BCM2708 platform. ++ ++config BCM2708_GPIO ++ bool "BCM2708 gpio support" ++ depends on MACH_BCM2708 ++ select ARCH_REQUIRE_GPIOLIB ++ default y ++ help ++ Include support for the Broadcom(R) BCM2708 gpio. ++ ++config BCM2708_VCMEM ++ bool "Videocore Memory" ++ depends on MACH_BCM2708 ++ default y ++ help ++ Helper for videocore memory access and total size allocation. ++ ++config BCM2708_NOL2CACHE ++ bool "Videocore L2 cache disable" ++ depends on MACH_BCM2708 ++ default n ++ help ++ Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt. ++ ++endmenu +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/Makefile bootc-3.2.21/arch/arm/mach-bcm2708/Makefile +--- upstream-3.2.21/arch/arm/mach-bcm2708/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/Makefile 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,8 @@ ++# ++# Makefile for the linux kernel. ++# ++ ++obj-$(CONFIG_MACH_BCM2708) += clock.o bcm2708.o armctrl.o vcio.o power.o dma.o ++obj-$(CONFIG_BCM2708_GPIO) += bcm2708_gpio.o ++obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o ++ +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/Makefile.boot bootc-3.2.21/arch/arm/mach-bcm2708/Makefile.boot +--- upstream-3.2.21/arch/arm/mach-bcm2708/Makefile.boot 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/Makefile.boot 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,3 @@ ++ zreladdr-y := 0x00008000 ++params_phys-y := 0x00000100 ++initrd_phys-y := 0x00800000 +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/power.c bootc-3.2.21/arch/arm/mach-bcm2708/power.c +--- upstream-3.2.21/arch/arm/mach-bcm2708/power.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/power.c 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,194 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/power.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This device provides a shared mechanism for controlling the power to ++ * VideoCore subsystems. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "bcm2708_power" ++ ++#define BCM_POWER_MAXCLIENTS 4 ++#define BCM_POWER_NOCLIENT (1<<31) ++ ++/* Some drivers expect there devices to be permanently powered */ ++#define BCM_POWER_ALWAYS_ON (BCM_POWER_USB) ++ ++#if 1 ++#define DPRINTK printk ++#else ++#define DPRINTK if (0) printk ++#endif ++ ++struct state_struct { ++ uint32_t global_request; ++ uint32_t client_request[BCM_POWER_MAXCLIENTS]; ++ struct semaphore client_mutex; ++ struct semaphore mutex; ++} g_state; ++ ++int bcm_power_open(BCM_POWER_HANDLE_T *handle) ++{ ++ BCM_POWER_HANDLE_T i; ++ int ret = -EBUSY; ++ ++ down(&g_state.client_mutex); ++ ++ for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) { ++ if (g_state.client_request[i] == BCM_POWER_NOCLIENT) { ++ g_state.client_request[i] = BCM_POWER_NONE; ++ *handle = i; ++ ret = 0; ++ break; ++ } ++ } ++ ++ up(&g_state.client_mutex); ++ ++ DPRINTK("bcm_power_open() -> %d\n", *handle); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(bcm_power_open); ++ ++int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request) ++{ ++ int rc = 0; ++ ++ DPRINTK("bcm_power_request(%d, %x)\n", handle, request); ++ ++ if ((handle < BCM_POWER_MAXCLIENTS) && ++ (g_state.client_request[handle] != BCM_POWER_NOCLIENT)) { ++ if (down_interruptible(&g_state.mutex) != 0) { ++ DPRINTK("bcm_power_request -> interrupted\n"); ++ return -EINTR; ++ } ++ ++ if (request != g_state.client_request[handle]) { ++ uint32_t others_request = 0; ++ uint32_t global_request; ++ BCM_POWER_HANDLE_T i; ++ ++ for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) { ++ if (i != handle) ++ others_request |= ++ g_state.client_request[i]; ++ } ++ others_request &= ~BCM_POWER_NOCLIENT; ++ ++ global_request = request | others_request; ++ if (global_request != g_state.global_request) { ++ uint32_t actual; ++ ++ /* Send a request to VideoCore */ ++ bcm_mailbox_write(MBOX_CHAN_POWER, ++ global_request << 4); ++ ++ /* Wait for a response during power-up */ ++ if (global_request & ~g_state.global_request) { ++ rc = bcm_mailbox_read(MBOX_CHAN_POWER, ++ &actual); ++ DPRINTK ++ ("bcm_mailbox_read -> %08x, %d\n", ++ actual, rc); ++ actual >>= 4; ++ } else { ++ rc = 0; ++ actual = global_request; ++ } ++ ++ if (rc == 0) { ++ if (actual != global_request) { ++ printk(KERN_ERR ++ "%s: prev global %x, new global %x, actual %x, request %x, others_request %x\n", ++ __func__, ++ g_state.global_request, ++ global_request, actual, request, others_request); ++ /* A failure */ ++ BUG_ON((others_request & actual) ++ != others_request); ++ request &= actual; ++ rc = -EIO; ++ } ++ ++ g_state.global_request = actual; ++ g_state.client_request[handle] = ++ request; ++ } ++ } ++ } ++ up(&g_state.mutex); ++ } else { ++ rc = -EINVAL; ++ } ++ DPRINTK("bcm_power_request -> %d\n", rc); ++ return rc; ++} ++EXPORT_SYMBOL_GPL(bcm_power_request); ++ ++int bcm_power_close(BCM_POWER_HANDLE_T handle) ++{ ++ int rc; ++ ++ DPRINTK("bcm_power_close(%d)\n", handle); ++ ++ rc = bcm_power_request(handle, BCM_POWER_NONE); ++ if (rc == 0) ++ g_state.client_request[handle] = BCM_POWER_NOCLIENT; ++ ++ return rc; ++} ++EXPORT_SYMBOL_GPL(bcm_power_close); ++ ++static int __init bcm_power_init(void) ++{ ++#if defined(BCM_POWER_ALWAYS_ON) ++ BCM_POWER_HANDLE_T always_on_handle; ++#endif ++ int rc = 0; ++ int i; ++ ++ printk(KERN_INFO "bcm_power: Broadcom power driver\n"); ++ bcm_mailbox_write(MBOX_CHAN_POWER, 0); ++ ++ for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) ++ g_state.client_request[i] = BCM_POWER_NOCLIENT; ++ ++ sema_init(&g_state.client_mutex, 1); ++ sema_init(&g_state.mutex, 1); ++ ++ g_state.global_request = 0; ++ ++#if defined(BCM_POWER_ALWAYS_ON) ++ if (BCM_POWER_ALWAYS_ON) { ++ bcm_power_open(&always_on_handle); ++ bcm_power_request(always_on_handle, BCM_POWER_ALWAYS_ON); ++ } ++#endif ++ ++ return rc; ++} ++ ++static void __exit bcm_power_exit(void) ++{ ++ bcm_mailbox_write(MBOX_CHAN_POWER, 0); ++} ++ ++arch_initcall(bcm_power_init); /* Initialize early */ ++module_exit(bcm_power_exit); ++ ++MODULE_AUTHOR("Phil Elwell"); ++MODULE_DESCRIPTION("Interface to BCM2708 power management"); ++MODULE_LICENSE("GPL"); +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/vcio.c bootc-3.2.21/arch/arm/mach-bcm2708/vcio.c +--- upstream-3.2.21/arch/arm/mach-bcm2708/vcio.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/vcio.c 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,308 @@ ++/* ++ * linux/arch/arm/mach-bcm2708/vcio.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This device provides a shared mechanism for writing to the mailboxes, ++ * semaphores, doorbells etc. that are shared between the ARM and the ++ * VideoCore processor ++ */ ++ ++#if defined(CONFIG_SERIAL_BCM_MBOX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++#define SUPPORT_SYSRQ ++#endif ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++ ++#define DRIVER_NAME BCM_VCIO_DRIVER_NAME ++ ++/* ---------------------------------------------------------------------- ++ * Mailbox ++ * -------------------------------------------------------------------- */ ++ ++/* offsets from a mail box base address */ ++#define MAIL_WRT 0x00 /* write - and next 4 words */ ++#define MAIL_RD 0x00 /* read - and next 4 words */ ++#define MAIL_POL 0x10 /* read without popping the fifo */ ++#define MAIL_SND 0x14 /* sender ID (bottom two bits) */ ++#define MAIL_STA 0x18 /* status */ ++#define MAIL_CNF 0x1C /* configuration */ ++ ++#define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf)) ++#define MBOX_MSG_LSB(chan, data28) (((data28) << 4) | ((chan) & 0xf)) ++#define MBOX_CHAN(msg) ((msg) & 0xf) ++#define MBOX_DATA28(msg) ((msg) & ~0xf) ++#define MBOX_DATA28_LSB(msg) (((uint32_t)msg) >> 4) ++ ++#define MBOX_MAGIC 0xd0d0c0de ++ ++struct vc_mailbox { ++ struct device *dev; /* parent device */ ++ void __iomem *status; ++ void __iomem *config; ++ void __iomem *read; ++ void __iomem *write; ++ uint32_t msg[MBOX_CHAN_COUNT]; ++ struct semaphore sema[MBOX_CHAN_COUNT]; ++ uint32_t magic; ++}; ++ ++static void mbox_init(struct vc_mailbox *mbox_out, struct device *dev, ++ uint32_t addr_mbox) ++{ ++ int i; ++ ++ mbox_out->dev = dev; ++ mbox_out->status = __io_address(addr_mbox + MAIL_STA); ++ mbox_out->config = __io_address(addr_mbox + MAIL_CNF); ++ mbox_out->read = __io_address(addr_mbox + MAIL_RD); ++ /* Write to the other mailbox */ ++ mbox_out->write = ++ __io_address((addr_mbox ^ ARM_0_MAIL0_WRT ^ ARM_0_MAIL1_WRT) + ++ MAIL_WRT); ++ ++ for (i = 0; i < MBOX_CHAN_COUNT; i++) { ++ mbox_out->msg[i] = 0; ++ sema_init(&mbox_out->sema[i], 0); ++ } ++ ++ /* Enable the interrupt on data reception */ ++ writel(ARM_MC_IHAVEDATAIRQEN, mbox_out->config); ++ ++ mbox_out->magic = MBOX_MAGIC; ++} ++ ++static int mbox_write(struct vc_mailbox *mbox, unsigned chan, uint32_t data28) ++{ ++ int rc; ++ ++ if (mbox->magic != MBOX_MAGIC) ++ rc = -EINVAL; ++ else { ++ /* wait for the mailbox FIFO to have some space in it */ ++ while (0 != (readl(mbox->status) & ARM_MS_FULL)) ++ cpu_relax(); ++ ++ writel(MBOX_MSG(chan, data28), mbox->write); ++ rc = 0; ++ } ++ return rc; ++} ++ ++static int mbox_read(struct vc_mailbox *mbox, unsigned chan, uint32_t *data28) ++{ ++ int rc; ++ ++ if (mbox->magic != MBOX_MAGIC) ++ rc = -EINVAL; ++ else { ++ if (down_interruptible(&mbox->sema[chan]) == 0) { ++ *data28 = MBOX_DATA28(mbox->msg[chan]); ++ mbox->msg[chan] = 0; ++ rc = 0; ++ } else { ++ /* The wait was interrupted */ ++ rc = -EINTR; ++ } ++ } ++ return rc; ++} ++ ++static irqreturn_t mbox_irq(int irq, void *dev_id) ++{ ++ /* wait for the mailbox FIFO to have some data in it */ ++ struct vc_mailbox *mbox = (struct vc_mailbox *) dev_id; ++ int status = readl(mbox->status); ++ int ret = IRQ_NONE; ++ ++ while (!(status & ARM_MS_EMPTY)) { ++ uint32_t msg = readl(mbox->read); ++ int chan = MBOX_CHAN(msg); ++ if (chan < MBOX_CHAN_COUNT) { ++ if (mbox->msg[chan]) { ++ /* Overflow */ ++ printk(KERN_ERR DRIVER_NAME ++ ": mbox chan %d overflow - drop %08x\n", ++ chan, msg); ++ } else { ++ mbox->msg[chan] = (msg | 0xf); ++ up(&mbox->sema[chan]); ++ } ++ } else { ++ printk(KERN_ERR DRIVER_NAME ++ ": invalid channel selector (msg %08x)\n", msg); ++ } ++ ret = IRQ_HANDLED; ++ status = readl(mbox->status); ++ } ++ return ret; ++} ++ ++static struct irqaction mbox_irqaction = { ++ .name = "ARM Mailbox IRQ", ++ .flags = IRQF_DISABLED | IRQF_IRQPOLL, ++ .handler = mbox_irq, ++}; ++ ++/* ---------------------------------------------------------------------- ++ * Mailbox Methods ++ * -------------------------------------------------------------------- */ ++ ++static struct device *mbox_dev; /* we assume there's only one! */ ++ ++static int dev_mbox_write(struct device *dev, unsigned chan, uint32_t data28) ++{ ++ int rc; ++ ++ struct vc_mailbox *mailbox = dev_get_drvdata(dev); ++ device_lock(dev); ++ rc = mbox_write(mailbox, chan, data28); ++ device_unlock(dev); ++ ++ return rc; ++} ++ ++static int dev_mbox_read(struct device *dev, unsigned chan, uint32_t *data28) ++{ ++ int rc; ++ ++ struct vc_mailbox *mailbox = dev_get_drvdata(dev); ++ device_lock(dev); ++ rc = mbox_read(mailbox, chan, data28); ++ device_unlock(dev); ++ ++ return rc; ++} ++ ++extern int bcm_mailbox_write(unsigned chan, uint32_t data28) ++{ ++ if (mbox_dev) ++ return dev_mbox_write(mbox_dev, chan, data28); ++ else ++ return -ENODEV; ++} ++EXPORT_SYMBOL_GPL(bcm_mailbox_write); ++ ++extern int bcm_mailbox_read(unsigned chan, uint32_t *data28) ++{ ++ if (mbox_dev) ++ return dev_mbox_read(mbox_dev, chan, data28); ++ else ++ return -ENODEV; ++} ++EXPORT_SYMBOL_GPL(bcm_mailbox_read); ++ ++static void dev_mbox_register(const char *dev_name, struct device *dev) ++{ ++ mbox_dev = dev; ++} ++ ++/* ---------------------------------------------------------------------- ++ * Platform Device for Mailbox ++ * -------------------------------------------------------------------- */ ++ ++static int bcm_vcio_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ struct vc_mailbox *mailbox; ++ ++ mailbox = kzalloc(sizeof(*mailbox), GFP_KERNEL); ++ if (NULL == mailbox) { ++ printk(KERN_ERR DRIVER_NAME ": failed to allocate " ++ "mailbox memory\n"); ++ ret = -ENOMEM; ++ } else { ++ struct resource *res; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (res == NULL) { ++ printk(KERN_ERR DRIVER_NAME ": failed to obtain memory " ++ "resource\n"); ++ ret = -ENODEV; ++ kfree(mailbox); ++ } else { ++ /* should be based on the registers from res really */ ++ mbox_init(mailbox, &pdev->dev, ARM_0_MAIL0_RD); ++ ++ platform_set_drvdata(pdev, mailbox); ++ dev_mbox_register(DRIVER_NAME, &pdev->dev); ++ ++ mbox_irqaction.dev_id = mailbox; ++ setup_irq(IRQ_ARM_MAILBOX, &mbox_irqaction); ++ printk(KERN_INFO DRIVER_NAME ": mailbox at %p\n", ++ __io_address(ARM_0_MAIL0_RD)); ++ } ++ } ++ return ret; ++} ++ ++static int bcm_vcio_remove(struct platform_device *pdev) ++{ ++ struct vc_mailbox *mailbox = platform_get_drvdata(pdev); ++ ++ platform_set_drvdata(pdev, NULL); ++ kfree(mailbox); ++ ++ return 0; ++} ++ ++static struct platform_driver bcm_mbox_driver = { ++ .probe = bcm_vcio_probe, ++ .remove = bcm_vcio_remove, ++ ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init bcm_mbox_init(void) ++{ ++ int ret; ++ ++ printk(KERN_INFO "mailbox: Broadcom VideoCore Mailbox driver\n"); ++ ++ ret = platform_driver_register(&bcm_mbox_driver); ++ if (ret != 0) { ++ printk(KERN_ERR DRIVER_NAME ": failed to register " ++ "on platform\n"); ++ } ++ ++ return ret; ++} ++ ++static void __exit bcm_mbox_exit(void) ++{ ++ platform_driver_unregister(&bcm_mbox_driver); ++} ++ ++arch_initcall(bcm_mbox_init); /* Initialize early */ ++module_exit(bcm_mbox_exit); ++ ++MODULE_AUTHOR("Gray Girling"); ++MODULE_DESCRIPTION("ARM I/O to VideoCore processor"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:bcm-mbox"); +diff -urN upstream-3.2.21/arch/arm/mach-bcm2708/vc_mem.c bootc-3.2.21/arch/arm/mach-bcm2708/vc_mem.c +--- upstream-3.2.21/arch/arm/mach-bcm2708/vc_mem.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mach-bcm2708/vc_mem.c 2012-06-23 23:51:28.000000000 +0000 +@@ -0,0 +1,466 @@ ++/***************************************************************************** ++* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_ARCH_KONA ++#include ++#elif CONFIG_ARCH_BCM2708 ++#else ++#include ++#endif ++ ++#include "mach/vc_mem.h" ++//#include "interface/vchiq_arm/vchiq_connected.h" ++ ++#define DRIVER_NAME "vc-mem" ++ ++// Uncomment to enable debug logging ++//#define ENABLE_DBG ++ ++#if defined(ENABLE_DBG) ++#define LOG_DBG( fmt, ... ) printk( KERN_INFO fmt "\n", ##__VA_ARGS__ ) ++#else ++#define LOG_DBG( fmt, ... ) ++#endif ++#define LOG_ERR( fmt, ... ) printk( KERN_ERR fmt "\n", ##__VA_ARGS__ ) ++ ++// Device (/dev) related variables ++static dev_t vc_mem_devnum = 0; ++static struct class *vc_mem_class = NULL; ++static struct cdev vc_mem_cdev; ++static int vc_mem_inited = 0; ++ ++// Proc entry ++static struct proc_dir_entry *vc_mem_proc_entry; ++ ++/* ++ * Videocore memory addresses and size ++ * ++ * Drivers that wish to know the videocore memory addresses and sizes should ++ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in ++ * headers. This allows the other drivers to not be tied down to a a certain ++ * address/size at compile time. ++ * ++ * In the future, the goal is to have the videocore memory virtual address and ++ * size be calculated at boot time rather than at compile time. The decision of ++ * where the videocore memory resides and its size would be in the hands of the ++ * bootloader (and/or kernel). When that happens, the values of these variables ++ * would be calculated and assigned in the init function. ++ */ ++#ifdef CONFIG_ARCH_KONA ++ ++#include ++unsigned long mm_vc_mem_phys_addr = VC_EMI; ++ ++#elif CONFIG_ARCH_BCM2708 ++ ++// in the 2835 VC in mapped above ARM, but ARM has full access to VC space ++unsigned long mm_vc_mem_phys_addr = 0x00000000; ++ ++#else ++ ++#include ++unsigned long mm_vc_mem_phys_addr = MM_ADDR_IO_VC_EMI; ++ ++#endif ++ ++unsigned int mm_vc_mem_size = 0; ++unsigned int mm_vc_mem_base = 0; ++ ++EXPORT_SYMBOL(mm_vc_mem_phys_addr); ++EXPORT_SYMBOL(mm_vc_mem_size); ++EXPORT_SYMBOL(mm_vc_mem_base); ++ ++/**************************************************************************** ++* ++* vc_mem_open ++* ++***************************************************************************/ ++ ++static int ++vc_mem_open(struct inode *inode, struct file *file) ++{ ++ (void) inode; ++ (void) file; ++ ++ LOG_DBG("%s: called file = 0x%p", __func__, file); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_release ++* ++***************************************************************************/ ++ ++static int ++vc_mem_release(struct inode *inode, struct file *file) ++{ ++ (void) inode; ++ (void) file; ++ ++ LOG_DBG("%s: called file = 0x%p", __func__, file); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_size ++* ++***************************************************************************/ ++ ++static void ++vc_mem_get_size(void) ++{ ++ mm_vc_mem_size = 256 * 1024 * 1024; // Static for now ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_base ++* ++***************************************************************************/ ++ ++static void ++vc_mem_get_base(void) ++{ ++ mm_vc_mem_base = 128 * 1024 * 1024; // Static for now ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_current_size ++* ++***************************************************************************/ ++ ++int ++vc_mem_get_current_size(void) ++{ ++ vc_mem_get_size(); ++ return mm_vc_mem_size; ++} ++ ++EXPORT_SYMBOL_GPL(vc_mem_get_current_size); ++ ++/**************************************************************************** ++* ++* vc_mem_ioctl ++* ++***************************************************************************/ ++ ++static long ++vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int rc = 0; ++ ++ (void) cmd; ++ (void) arg; ++ ++ LOG_DBG("%s: called file = 0x%p", __func__, file); ++ ++ switch (cmd) { ++ case VC_MEM_IOC_MEM_PHYS_ADDR: ++ { ++ LOG_DBG("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p", ++ __func__, (void *) mm_vc_mem_phys_addr); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, ++ sizeof (mm_vc_mem_phys_addr)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ case VC_MEM_IOC_MEM_SIZE: ++ { ++ // Get the videocore memory size first ++ vc_mem_get_size(); ++ ++ LOG_DBG("%s: VC_MEM_IOC_MEM_SIZE=%u", __func__, ++ mm_vc_mem_size); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_size, ++ sizeof (mm_vc_mem_size)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ case VC_MEM_IOC_MEM_BASE: ++ { ++ // Get the videocore memory base ++ vc_mem_get_base(); ++ ++ LOG_DBG("%s: VC_MEM_IOC_MEM_BASE=%u", __func__, ++ mm_vc_mem_base); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_base, ++ sizeof (mm_vc_mem_base)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ default: ++ { ++ return -ENOTTY; ++ } ++ } ++ LOG_DBG("%s: file = 0x%p returning %d", __func__, file, rc); ++ ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_mmap ++* ++***************************************************************************/ ++ ++static int ++vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) ++{ ++ int rc = 0; ++ unsigned long length = vma->vm_end - vma->vm_start; ++ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; ++ ++ LOG_DBG("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx", ++ __func__, (long) vma->vm_start, (long) vma->vm_end, ++ (long) vma->vm_pgoff); ++ ++ if (offset + length > mm_vc_mem_size) { ++ LOG_ERR("%s: length %ld is too big", __func__, length); ++ return -EINVAL; ++ } ++ // Do not cache the memory map ++ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ++ ++ rc = remap_pfn_range(vma, vma->vm_start, ++ (mm_vc_mem_phys_addr >> PAGE_SHIFT) + ++ vma->vm_pgoff, length, vma->vm_page_prot); ++ if (rc != 0) { ++ LOG_ERR("%s: remap_pfn_range failed (rc=%d)", __func__, rc); ++ } ++ ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* File Operations for the driver. ++* ++***************************************************************************/ ++ ++static const struct file_operations vc_mem_fops = { ++ .owner = THIS_MODULE, ++ .open = vc_mem_open, ++ .release = vc_mem_release, ++ .unlocked_ioctl = vc_mem_ioctl, ++ .mmap = vc_mem_mmap, ++}; ++ ++/**************************************************************************** ++* ++* vc_mem_proc_read ++* ++***************************************************************************/ ++ ++static int ++vc_mem_proc_read(char *buf, char **start, off_t offset, int count, int *eof, ++ void *data) ++{ ++ char *p = buf; ++ ++ (void) start; ++ (void) count; ++ (void) data; ++ ++ if (offset > 0) { ++ *eof = 1; ++ return 0; ++ } ++ // Get the videocore memory size first ++ vc_mem_get_size(); ++ ++ p += sprintf(p, "Videocore memory:\n"); ++ if (mm_vc_mem_phys_addr != 0) ++ p += sprintf(p, " Physical address: 0x%p\n", ++ (void *) mm_vc_mem_phys_addr); ++ else ++ p += sprintf(p, " Physical address: 0x00000000\n"); ++ p += sprintf(p, " Length (bytes): %u\n", mm_vc_mem_size); ++ ++ *eof = 1; ++ return p - buf; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_proc_write ++* ++***************************************************************************/ ++ ++static int ++vc_mem_proc_write(struct file *file, const char __user * buffer, ++ unsigned long count, void *data) ++{ ++ int rc = -EFAULT; ++ char input_str[10]; ++ ++ memset(input_str, 0, sizeof (input_str)); ++ ++ if (count > sizeof (input_str)) { ++ LOG_ERR("%s: input string length too long", __func__); ++ goto out; ++ } ++ ++ if (copy_from_user(input_str, buffer, count - 1)) { ++ LOG_ERR("%s: failed to get input string", __func__); ++ goto out; ++ } ++ ++ if (strncmp(input_str, "connect", strlen("connect")) == 0) { ++ // Get the videocore memory size from the videocore ++ vc_mem_get_size(); ++ } ++ ++ out: ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_connected_init ++* ++* This function is called once the videocore has been connected. ++* ++***************************************************************************/ ++ ++void ++vc_mem_connected_init(void) ++{ ++ int rc = -EFAULT; ++ struct device *dev; ++ ++ LOG_DBG("%s: called", __func__); ++ ++ vc_mem_get_size(); ++ ++ printk("vc-mem: mm_vc_mem_phys_addr = 0x%08lx\n", mm_vc_mem_phys_addr); ++ printk("vc-mem: mm_vc_mem_size = 0x%08x (%u MiB)\n", ++ mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); ++ ++ if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { ++ LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc); ++ goto out_err; ++ } ++ ++ cdev_init(&vc_mem_cdev, &vc_mem_fops); ++ if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { ++ LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc); ++ goto out_unregister; ++ } ++ ++ vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME); ++ if (IS_ERR(vc_mem_class)) { ++ rc = PTR_ERR(vc_mem_class); ++ LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc); ++ goto out_cdev_del; ++ } ++ ++ dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL, ++ DRIVER_NAME); ++ if (IS_ERR(dev)) { ++ rc = PTR_ERR(dev); ++ LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc); ++ goto out_class_destroy; ++ } ++ ++ vc_mem_proc_entry = create_proc_entry(DRIVER_NAME, 0444, NULL); ++ if (vc_mem_proc_entry == NULL) { ++ rc = -EFAULT; ++ LOG_ERR("%s: create_proc_entry failed", __func__); ++ goto out_device_destroy; ++ } ++ vc_mem_proc_entry->read_proc = vc_mem_proc_read; ++ vc_mem_proc_entry->write_proc = vc_mem_proc_write; ++ ++ vc_mem_inited = 1; ++ return; ++ ++ out_device_destroy: ++ device_destroy(vc_mem_class, vc_mem_devnum); ++ ++ out_class_destroy: ++ class_destroy(vc_mem_class); ++ vc_mem_class = NULL; ++ ++ out_cdev_del: ++ cdev_del(&vc_mem_cdev); ++ ++ out_unregister: ++ unregister_chrdev_region(vc_mem_devnum, 1); ++ ++ out_err: ++ return; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_init ++* ++***************************************************************************/ ++ ++static int __init ++vc_mem_init(void) ++{ ++ printk(KERN_INFO "vc-mem: Videocore memory driver\n"); ++ ++ //vchiq_add_connected_callback(vc_mem_connected_init); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_exit ++* ++***************************************************************************/ ++ ++static void __exit ++vc_mem_exit(void) ++{ ++ LOG_DBG("%s: called", __func__); ++ ++ if (vc_mem_inited) { ++ remove_proc_entry(vc_mem_proc_entry->name, NULL); ++ device_destroy(vc_mem_class, vc_mem_devnum); ++ class_destroy(vc_mem_class); ++ cdev_del(&vc_mem_cdev); ++ unregister_chrdev_region(vc_mem_devnum, 1); ++ } ++} ++ ++module_init(vc_mem_init); ++module_exit(vc_mem_exit); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Broadcom Corporation"); +diff -urN upstream-3.2.21/arch/arm/Makefile bootc-3.2.21/arch/arm/Makefile +--- upstream-3.2.21/arch/arm/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/arch/arm/Makefile 2012-06-23 23:51:28.000000000 +0000 +@@ -198,6 +198,7 @@ + machine-$(CONFIG_MACH_SPEAR320) := spear3xx + machine-$(CONFIG_MACH_SPEAR600) := spear6xx + machine-$(CONFIG_ARCH_ZYNQ) := zynq ++machine-$(CONFIG_ARCH_BCM2708) := bcm2708 + + # Platform directory name. This list is sorted alphanumerically + # by CONFIG_* macro name. +diff -urN upstream-3.2.21/arch/arm/mm/alignment.c bootc-3.2.21/arch/arm/mm/alignment.c +--- upstream-3.2.21/arch/arm/mm/alignment.c 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mm/alignment.c 2012-06-23 23:51:30.000000000 +0000 +@@ -855,9 +855,11 @@ + case 0x08000000: /* ldm or stm, or thumb-2 32bit instruction */ + if (thumb2_32b) + handler = do_alignment_t32_to_handler(&instr, regs, &offset); +- else ++ else { ++ offset.un = 0; /* to keep compiler happy */ + handler = do_alignment_ldmstm; +- break; ++ } ++ break; + + default: + goto bad; +diff -urN upstream-3.2.21/arch/arm/mm/Kconfig bootc-3.2.21/arch/arm/mm/Kconfig +--- upstream-3.2.21/arch/arm/mm/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mm/Kconfig 2012-06-23 23:51:30.000000000 +0000 +@@ -390,7 +390,7 @@ + + # ARMv6 + config CPU_V6 +- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX ++ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || MACH_BCM2708 + select CPU_32v6 + select CPU_ABRT_EV6 + select CPU_PABRT_V6 +diff -urN upstream-3.2.21/arch/arm/mm/proc-v6.S bootc-3.2.21/arch/arm/mm/proc-v6.S +--- upstream-3.2.21/arch/arm/mm/proc-v6.S 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/arch/arm/mm/proc-v6.S 2012-06-23 23:51:31.000000000 +0000 +@@ -70,10 +70,19 @@ + * + * IRQs are already disabled. + */ ++ ++/* See jira SW-5991 for details of this workaround */ + ENTRY(cpu_v6_do_idle) +- mov r1, #0 +- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode +- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt ++ .align 5 ++ mov r1, #2 ++1: subs r1, #1 ++ nop ++ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode ++ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt ++ nop ++ nop ++ nop ++ bne 1b + mov pc, lr + + ENTRY(cpu_v6_dcache_clean_area) +diff -urN upstream-3.2.21/drivers/i2c/busses/i2c-bcm2708.c bootc-3.2.21/drivers/i2c/busses/i2c-bcm2708.c +--- upstream-3.2.21/drivers/i2c/busses/i2c-bcm2708.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/i2c/busses/i2c-bcm2708.c 2012-06-23 23:51:52.000000000 +0000 +@@ -0,0 +1,379 @@ ++/* ++ * Driver for Broadcom BCM2708 BSC Controllers ++ * ++ * Copyright (C) 2012 Chris Boot & Frank Buss ++ * ++ * This driver is inspired by: ++ * i2c-ocores.c, by Peter Korsgaard ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* BSC register offsets */ ++#define BSC_C 0x00 ++#define BSC_S 0x04 ++#define BSC_DLEN 0x08 ++#define BSC_A 0x0c ++#define BSC_FIFO 0x10 ++#define BSC_DIV 0x14 ++#define BSC_DEL 0x18 ++#define BSC_CLKT 0x1c ++ ++/* Bitfields in BSC_C */ ++#define BSC_C_I2CEN 0x00008000 ++#define BSC_C_INTR 0x00000400 ++#define BSC_C_INTT 0x00000200 ++#define BSC_C_INTD 0x00000100 ++#define BSC_C_ST 0x00000080 ++#define BSC_C_CLEAR_1 0x00000020 ++#define BSC_C_CLEAR_2 0x00000010 ++#define BSC_C_READ 0x00000001 ++ ++/* Bitfields in BSC_S */ ++#define BSC_S_CLKT 0x00000200 ++#define BSC_S_ERR 0x00000100 ++#define BSC_S_RXF 0x00000080 ++#define BSC_S_TXE 0x00000040 ++#define BSC_S_RXD 0x00000020 ++#define BSC_S_TXD 0x00000010 ++#define BSC_S_RXR 0x00000008 ++#define BSC_S_TXW 0x00000004 ++#define BSC_S_DONE 0x00000002 ++#define BSC_S_TA 0x00000001 ++ ++#define I2C_CLOCK_HZ 100000 /* FIXME: get from DT */ ++#define I2C_TIMEOUT_MS 150 ++ ++#define DRV_NAME "bcm2708_i2c" ++ ++struct bcm2708_i2c { ++ struct i2c_adapter adapter; ++ ++ spinlock_t lock; ++ void __iomem *base; ++ int irq; ++ struct clk *clk; ++ ++ struct completion done; ++ ++ struct i2c_msg *msg; ++ int pos; ++ int nmsgs; ++ bool error; ++}; ++ ++/* ++ * This function sets the ALT mode on the I2C pins so that we can use them with ++ * the BSC hardware. ++ * ++ * FIXME: This is a hack. Use pinmux / pinctrl. ++ */ ++static void bcm2708_i2c_init_pinmode(void) ++{ ++#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3)) ++#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3)) ++ ++ int pin; ++ u32 *gpio = ioremap(0x20200000, SZ_16K); ++ ++ /* BSC0 is on GPIO 0 & 1, BSC1 is on GPIO 2 & 3 */ ++ for (pin = 0; pin <= 3; pin++) { ++ INP_GPIO(pin); /* set mode to GPIO input first */ ++ SET_GPIO_ALT(pin, 0); /* set mode to ALT 0 */ ++ } ++ ++ iounmap(gpio); ++ ++#undef INP_GPIO ++#undef SET_GPIO_ALT ++} ++ ++static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg) ++{ ++ return readl(bi->base + reg); ++} ++ ++static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val) ++{ ++ writel(val, bi->base + reg); ++} ++ ++static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi) ++{ ++ bcm2708_wr(bi, BSC_C, 0); ++ bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE); ++} ++ ++static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi) ++{ ++ while ((bcm2708_rd(bi, BSC_S) & BSC_S_RXD) && (bi->pos < bi->msg->len)) ++ bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO); ++} ++ ++static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi) ++{ ++ while ((bcm2708_rd(bi, BSC_S) & BSC_S_TXD) && (bi->pos < bi->msg->len)) ++ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]); ++} ++ ++static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi) ++{ ++ unsigned long bus_hz; ++ u32 cdiv; ++ u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1; ++ ++ bus_hz = clk_get_rate(bi->clk); ++ cdiv = bus_hz / I2C_CLOCK_HZ; ++ ++ if (bi->msg->flags & I2C_M_RD) ++ c |= BSC_C_INTR | BSC_C_READ; ++ else ++ c |= BSC_C_INTT; ++ ++ bcm2708_wr(bi, BSC_DIV, cdiv); ++ bcm2708_wr(bi, BSC_A, bi->msg->addr); ++ bcm2708_wr(bi, BSC_DLEN, bi->msg->len); ++ bcm2708_wr(bi, BSC_C, c); ++} ++ ++static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id) ++{ ++ struct bcm2708_i2c *bi = dev_id; ++ bool handled = true; ++ u32 s; ++ ++ spin_lock(&bi->lock); ++ ++ s = bcm2708_rd(bi, BSC_S); ++ ++ if (s & (BSC_S_CLKT | BSC_S_ERR)) { ++ bcm2708_bsc_reset(bi); ++ bi->error = true; ++ ++ /* wake up our bh */ ++ complete(&bi->done); ++ } else if (s & BSC_S_DONE) { ++ bi->nmsgs--; ++ ++ if (bi->msg->flags & I2C_M_RD) ++ bcm2708_bsc_fifo_drain(bi); ++ ++ bcm2708_bsc_reset(bi); ++ ++ if (bi->nmsgs) { ++ /* advance to next message */ ++ bi->msg++; ++ bi->pos = 0; ++ bcm2708_bsc_setup(bi); ++ } else { ++ /* wake up our bh */ ++ complete(&bi->done); ++ } ++ } else if (s & BSC_S_TXW) { ++ bcm2708_bsc_fifo_fill(bi); ++ } else if (s & BSC_S_RXR) { ++ bcm2708_bsc_fifo_drain(bi); ++ } else { ++ handled = false; ++ } ++ ++ spin_unlock(&bi->lock); ++ ++ return handled ? IRQ_HANDLED : IRQ_NONE; ++} ++ ++static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap, ++ struct i2c_msg *msgs, int num) ++{ ++ struct bcm2708_i2c *bi = adap->algo_data; ++ unsigned long flags; ++ int ret; ++ ++ spin_lock_irqsave(&bi->lock, flags); ++ ++ INIT_COMPLETION(bi->done); ++ bi->msg = msgs; ++ bi->pos = 0; ++ bi->nmsgs = num; ++ bi->error = false; ++ ++ spin_unlock_irqrestore(&bi->lock, flags); ++ ++ bcm2708_bsc_setup(bi); ++ ++ ret = wait_for_completion_timeout(&bi->done, ++ msecs_to_jiffies(I2C_TIMEOUT_MS)); ++ if (ret == 0) { ++ dev_err(&adap->dev, "transfer timed out\n"); ++ spin_lock_irqsave(&bi->lock, flags); ++ bcm2708_bsc_reset(bi); ++ spin_unlock_irqrestore(&bi->lock, flags); ++ return -ETIMEDOUT; ++ } ++ ++ return bi->error ? -EIO : num; ++} ++ ++static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap) ++{ ++ return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL; ++} ++ ++static struct i2c_algorithm bcm2708_i2c_algorithm = { ++ .master_xfer = bcm2708_i2c_master_xfer, ++ .functionality = bcm2708_i2c_functionality, ++}; ++ ++static int __devinit bcm2708_i2c_probe(struct platform_device *pdev) ++{ ++ struct resource *regs; ++ int irq, err = -ENOMEM; ++ struct clk *clk; ++ struct bcm2708_i2c *bi; ++ struct i2c_adapter *adap; ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ dev_err(&pdev->dev, "could not get IO memory\n"); ++ return -ENXIO; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) { ++ dev_err(&pdev->dev, "could not get IRQ\n"); ++ return irq; ++ } ++ ++ clk = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(clk)) { ++ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk)); ++ return PTR_ERR(clk); ++ } ++ ++ bcm2708_i2c_init_pinmode(); ++ ++ bi = kzalloc(sizeof(*bi), GFP_KERNEL); ++ if (!bi) ++ goto out_clk_put; ++ ++ platform_set_drvdata(pdev, bi); ++ ++ adap = &bi->adapter; ++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC; ++ adap->algo = &bcm2708_i2c_algorithm; ++ adap->algo_data = bi; ++ adap->dev.parent = &pdev->dev; ++ adap->nr = pdev->id; ++ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); ++ ++ switch (pdev->id) { ++ case 0: ++ adap->class = I2C_CLASS_HWMON; ++ break; ++ case 1: ++ adap->class = I2C_CLASS_DDC; ++ break; ++ default: ++ dev_err(&pdev->dev, "can only bind to BSC 0 or 1\n"); ++ err = -ENXIO; ++ goto out_free_bi; ++ } ++ ++ spin_lock_init(&bi->lock); ++ init_completion(&bi->done); ++ ++ bi->base = ioremap(regs->start, resource_size(regs)); ++ if (!bi->base) { ++ dev_err(&pdev->dev, "could not remap memory\n"); ++ goto out_free_bi; ++ } ++ ++ bi->irq = irq; ++ bi->clk = clk; ++ ++ err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED, ++ dev_name(&pdev->dev), bi); ++ if (err) { ++ dev_err(&pdev->dev, "could not request IRQ: %d\n", err); ++ goto out_iounmap; ++ } ++ ++ bcm2708_bsc_reset(bi); ++ ++ err = i2c_add_numbered_adapter(adap); ++ if (err < 0) { ++ dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err); ++ goto out_free_irq; ++ } ++ ++ dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d)\n", ++ pdev->id, (unsigned long)regs->start, irq); ++ ++ return 0; ++ ++out_free_irq: ++ free_irq(bi->irq, bi); ++out_iounmap: ++ iounmap(bi->base); ++out_free_bi: ++ kfree(bi); ++out_clk_put: ++ clk_put(clk); ++ return err; ++} ++ ++static int __devexit bcm2708_i2c_remove(struct platform_device *pdev) ++{ ++ struct bcm2708_i2c *bi = platform_get_drvdata(pdev); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ i2c_del_adapter(&bi->adapter); ++ free_irq(bi->irq, bi); ++ iounmap(bi->base); ++ clk_disable(bi->clk); ++ clk_put(bi->clk); ++ kfree(bi); ++ ++ return 0; ++} ++ ++static struct platform_driver bcm2708_i2c_driver = { ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = bcm2708_i2c_probe, ++ .remove = __devexit_p(bcm2708_i2c_remove), ++}; ++module_platform_driver(bcm2708_i2c_driver); ++ ++MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708"); ++MODULE_AUTHOR("Chris Boot "); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:" DRV_NAME); +diff -urN upstream-3.2.21/drivers/i2c/busses/Kconfig bootc-3.2.21/drivers/i2c/busses/Kconfig +--- upstream-3.2.21/drivers/i2c/busses/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/i2c/busses/Kconfig 2012-06-23 23:51:52.000000000 +0000 +@@ -308,6 +308,14 @@ + This driver can also be built as a module. If so, the module + will be called i2c-au1550. + ++config I2C_BCM2708 ++ tristate "BCM2708 BSC" ++ depends on MACH_BCM2708 ++ help ++ Enabling this option will add BSC (Broadcom Serial Controller) ++ support for the BCM2708. BSC is a Broadcom proprietary bus compatible ++ with I2C/TWI/SMBus. ++ + config I2C_BLACKFIN_TWI + tristate "Blackfin TWI I2C support" + depends on BLACKFIN +diff -urN upstream-3.2.21/drivers/i2c/busses/Makefile bootc-3.2.21/drivers/i2c/busses/Makefile +--- upstream-3.2.21/drivers/i2c/busses/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/i2c/busses/Makefile 2012-06-23 23:51:52.000000000 +0000 +@@ -30,6 +30,7 @@ + # Embedded system I2C/SMBus host controller drivers + obj-$(CONFIG_I2C_AT91) += i2c-at91.o + obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o ++obj-$(CONFIG_I2C_BCM2708) += i2c-bcm2708.o + obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o + obj-$(CONFIG_I2C_CPM) += i2c-cpm.o + obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o +diff -urN upstream-3.2.21/drivers/misc/Kconfig bootc-3.2.21/drivers/misc/Kconfig +--- upstream-3.2.21/drivers/misc/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/Kconfig 2012-06-23 23:52:02.000000000 +0000 +@@ -508,5 +508,6 @@ + source "drivers/misc/lis3lv02d/Kconfig" + source "drivers/misc/carma/Kconfig" + source "drivers/misc/altera-stapl/Kconfig" ++source "drivers/misc/vc04_services/Kconfig" + + endif # MISC_DEVICES +diff -urN upstream-3.2.21/drivers/misc/Makefile bootc-3.2.21/drivers/misc/Makefile +--- upstream-3.2.21/drivers/misc/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/Makefile 2012-06-23 23:52:02.000000000 +0000 +@@ -48,3 +48,4 @@ + obj-y += carma/ + obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o + obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ ++obj-y += vc04_services/ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/connections/connection.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/connections/connection.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/connections/connection.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/connections/connection.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,309 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef CONNECTION_H_ ++#define CONNECTION_H_ ++ ++#include "interface/vchi/vchi_cfg_internal.h" ++#include "interface/vchi/vchi_common.h" ++#include "interface/vchi/message_drivers/message.h" ++ ++/****************************************************************************** ++ Global defs ++ *****************************************************************************/ ++ ++// Opaque handle for a connection / service pair ++typedef struct opaque_vchi_connection_connected_service_handle_t *VCHI_CONNECTION_SERVICE_HANDLE_T; ++ ++// opaque handle to the connection state information ++typedef struct opaque_vchi_connection_info_t VCHI_CONNECTION_STATE_T; ++ ++typedef struct vchi_connection_t VCHI_CONNECTION_T; ++ ++ ++/****************************************************************************** ++ API ++ *****************************************************************************/ ++ ++// Routine to init a connection with a particular low level driver ++typedef VCHI_CONNECTION_STATE_T * (*VCHI_CONNECTION_INIT_T)( struct vchi_connection_t * connection, ++ const VCHI_MESSAGE_DRIVER_T * driver ); ++ ++// Routine to control CRC enabling at a connection level ++typedef int32_t (*VCHI_CONNECTION_CRC_CONTROL_T)( VCHI_CONNECTION_STATE_T *state_handle, ++ VCHI_CRC_CONTROL_T control ); ++ ++// Routine to create a service ++typedef int32_t (*VCHI_CONNECTION_SERVICE_CONNECT_T)( VCHI_CONNECTION_STATE_T *state_handle, ++ vcos_fourcc_t service_id, ++ uint32_t rx_fifo_size, ++ uint32_t tx_fifo_size, ++ int server, ++ VCHI_CALLBACK_T callback, ++ void *callback_param, ++ vcos_bool_t want_crc, ++ vcos_bool_t want_unaligned_bulk_rx, ++ vcos_bool_t want_unaligned_bulk_tx, ++ VCHI_CONNECTION_SERVICE_HANDLE_T *service_handle ); ++ ++// Routine to close a service ++typedef int32_t (*VCHI_CONNECTION_SERVICE_DISCONNECT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle ); ++ ++// Routine to queue a message ++typedef int32_t (*VCHI_CONNECTION_SERVICE_QUEUE_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ const void *data, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void *msg_handle ); ++ ++// scatter-gather (vector) message queueing ++typedef int32_t (*VCHI_CONNECTION_SERVICE_QUEUE_MESSAGEV_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ VCHI_MSG_VECTOR_T *vector, ++ uint32_t count, ++ VCHI_FLAGS_T flags, ++ void *msg_handle ); ++ ++// Routine to dequeue a message ++typedef int32_t (*VCHI_CONNECTION_SERVICE_DEQUEUE_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ void *data, ++ uint32_t max_data_size_to_read, ++ uint32_t *actual_msg_size, ++ VCHI_FLAGS_T flags ); ++ ++// Routine to peek at a message ++typedef int32_t (*VCHI_CONNECTION_SERVICE_PEEK_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ void **data, ++ uint32_t *msg_size, ++ VCHI_FLAGS_T flags ); ++ ++// Routine to hold a message ++typedef int32_t (*VCHI_CONNECTION_SERVICE_HOLD_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ void **data, ++ uint32_t *msg_size, ++ VCHI_FLAGS_T flags, ++ void **message_handle ); ++ ++// Routine to initialise a received message iterator ++typedef int32_t (*VCHI_CONNECTION_SERVICE_LOOKAHEAD_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ VCHI_MSG_ITER_T *iter, ++ VCHI_FLAGS_T flags ); ++ ++// Routine to release a held message ++typedef int32_t (*VCHI_CONNECTION_HELD_MSG_RELEASE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ void *message_handle ); ++ ++// Routine to get info on a held message ++typedef int32_t (*VCHI_CONNECTION_HELD_MSG_INFO_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ void *message_handle, ++ void **data, ++ int32_t *msg_size, ++ uint32_t *tx_timestamp, ++ uint32_t *rx_timestamp ); ++ ++// Routine to check whether the iterator has a next message ++typedef vcos_bool_t (*VCHI_CONNECTION_MSG_ITER_HAS_NEXT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service, ++ const VCHI_MSG_ITER_T *iter ); ++ ++// Routine to advance the iterator ++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_NEXT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service, ++ VCHI_MSG_ITER_T *iter, ++ void **data, ++ uint32_t *msg_size ); ++ ++// Routine to remove the last message returned by the iterator ++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_REMOVE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service, ++ VCHI_MSG_ITER_T *iter ); ++ ++// Routine to hold the last message returned by the iterator ++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_HOLD_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service, ++ VCHI_MSG_ITER_T *iter, ++ void **msg_handle ); ++ ++// Routine to transmit bulk data ++typedef int32_t (*VCHI_CONNECTION_BULK_QUEUE_TRANSMIT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ const void *data_src, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void *bulk_handle ); ++ ++// Routine to receive data ++typedef int32_t (*VCHI_CONNECTION_BULK_QUEUE_RECEIVE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, ++ void *data_dst, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void *bulk_handle ); ++ ++// Routine to report if a server is available ++typedef int32_t (*VCHI_CONNECTION_SERVER_PRESENT)( VCHI_CONNECTION_STATE_T *state, vcos_fourcc_t service_id, int32_t peer_flags ); ++ ++// Routine to report the number of RX slots available ++typedef int (*VCHI_CONNECTION_RX_SLOTS_AVAILABLE)( const VCHI_CONNECTION_STATE_T *state ); ++ ++// Routine to report the RX slot size ++typedef uint32_t (*VCHI_CONNECTION_RX_SLOT_SIZE)( const VCHI_CONNECTION_STATE_T *state ); ++ ++// Callback to indicate that the other side has added a buffer to the rx bulk DMA FIFO ++typedef void (*VCHI_CONNECTION_RX_BULK_BUFFER_ADDED)(VCHI_CONNECTION_STATE_T *state, ++ vcos_fourcc_t service, ++ uint32_t length, ++ MESSAGE_TX_CHANNEL_T channel, ++ uint32_t channel_params, ++ uint32_t data_length, ++ uint32_t data_offset); ++ ++// Callback to inform a service that a Xon or Xoff message has been received ++typedef void (*VCHI_CONNECTION_FLOW_CONTROL)(VCHI_CONNECTION_STATE_T *state, vcos_fourcc_t service_id, int32_t xoff); ++ ++// Callback to inform a service that a server available reply message has been received ++typedef void (*VCHI_CONNECTION_SERVER_AVAILABLE_REPLY)(VCHI_CONNECTION_STATE_T *state, vcos_fourcc_t service_id, uint32_t flags); ++ ++// Callback to indicate that bulk auxiliary messages have arrived ++typedef void (*VCHI_CONNECTION_BULK_AUX_RECEIVED)(VCHI_CONNECTION_STATE_T *state); ++ ++// Callback to indicate that bulk auxiliary messages have arrived ++typedef void (*VCHI_CONNECTION_BULK_AUX_TRANSMITTED)(VCHI_CONNECTION_STATE_T *state, void *handle); ++ ++// Callback with all the connection info you require ++typedef void (*VCHI_CONNECTION_INFO)(VCHI_CONNECTION_STATE_T *state, uint32_t protocol_version, uint32_t slot_size, uint32_t num_slots, uint32_t min_bulk_size); ++ ++// Callback to inform of a disconnect ++typedef void (*VCHI_CONNECTION_DISCONNECT)(VCHI_CONNECTION_STATE_T *state, uint32_t flags); ++ ++// Callback to inform of a power control request ++typedef void (*VCHI_CONNECTION_POWER_CONTROL)(VCHI_CONNECTION_STATE_T *state, MESSAGE_TX_CHANNEL_T channel, vcos_bool_t enable); ++ ++// allocate memory suitably aligned for this connection ++typedef void * (*VCHI_BUFFER_ALLOCATE)(VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, uint32_t * length); ++ ++// free memory allocated by buffer_allocate ++typedef void (*VCHI_BUFFER_FREE)(VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, void * address); ++ ++ ++/****************************************************************************** ++ System driver struct ++ *****************************************************************************/ ++ ++struct opaque_vchi_connection_api_t ++{ ++ // Routine to init the connection ++ VCHI_CONNECTION_INIT_T init; ++ ++ // Connection-level CRC control ++ VCHI_CONNECTION_CRC_CONTROL_T crc_control; ++ ++ // Routine to connect to or create service ++ VCHI_CONNECTION_SERVICE_CONNECT_T service_connect; ++ ++ // Routine to disconnect from a service ++ VCHI_CONNECTION_SERVICE_DISCONNECT_T service_disconnect; ++ ++ // Routine to queue a message ++ VCHI_CONNECTION_SERVICE_QUEUE_MESSAGE_T service_queue_msg; ++ ++ // scatter-gather (vector) message queue ++ VCHI_CONNECTION_SERVICE_QUEUE_MESSAGEV_T service_queue_msgv; ++ ++ // Routine to dequeue a message ++ VCHI_CONNECTION_SERVICE_DEQUEUE_MESSAGE_T service_dequeue_msg; ++ ++ // Routine to peek at a message ++ VCHI_CONNECTION_SERVICE_PEEK_MESSAGE_T service_peek_msg; ++ ++ // Routine to hold a message ++ VCHI_CONNECTION_SERVICE_HOLD_MESSAGE_T service_hold_msg; ++ ++ // Routine to initialise a received message iterator ++ VCHI_CONNECTION_SERVICE_LOOKAHEAD_MESSAGE_T service_look_ahead_msg; ++ ++ // Routine to release a message ++ VCHI_CONNECTION_HELD_MSG_RELEASE_T held_msg_release; ++ ++ // Routine to get information on a held message ++ VCHI_CONNECTION_HELD_MSG_INFO_T held_msg_info; ++ ++ // Routine to check for next message on iterator ++ VCHI_CONNECTION_MSG_ITER_HAS_NEXT_T msg_iter_has_next; ++ ++ // Routine to get next message on iterator ++ VCHI_CONNECTION_MSG_ITER_NEXT_T msg_iter_next; ++ ++ // Routine to remove the last message returned by iterator ++ VCHI_CONNECTION_MSG_ITER_REMOVE_T msg_iter_remove; ++ ++ // Routine to hold the last message returned by iterator ++ VCHI_CONNECTION_MSG_ITER_HOLD_T msg_iter_hold; ++ ++ // Routine to transmit bulk data ++ VCHI_CONNECTION_BULK_QUEUE_TRANSMIT_T bulk_queue_transmit; ++ ++ // Routine to receive data ++ VCHI_CONNECTION_BULK_QUEUE_RECEIVE_T bulk_queue_receive; ++ ++ // Routine to report the available servers ++ VCHI_CONNECTION_SERVER_PRESENT server_present; ++ ++ // Routine to report the number of RX slots available ++ VCHI_CONNECTION_RX_SLOTS_AVAILABLE connection_rx_slots_available; ++ ++ // Routine to report the RX slot size ++ VCHI_CONNECTION_RX_SLOT_SIZE connection_rx_slot_size; ++ ++ // Callback to indicate that the other side has added a buffer to the rx bulk DMA FIFO ++ VCHI_CONNECTION_RX_BULK_BUFFER_ADDED rx_bulk_buffer_added; ++ ++ // Callback to inform a service that a Xon or Xoff message has been received ++ VCHI_CONNECTION_FLOW_CONTROL flow_control; ++ ++ // Callback to inform a service that a server available reply message has been received ++ VCHI_CONNECTION_SERVER_AVAILABLE_REPLY server_available_reply; ++ ++ // Callback to indicate that bulk auxiliary messages have arrived ++ VCHI_CONNECTION_BULK_AUX_RECEIVED bulk_aux_received; ++ ++ // Callback to indicate that a bulk auxiliary message has been transmitted ++ VCHI_CONNECTION_BULK_AUX_TRANSMITTED bulk_aux_transmitted; ++ ++ // Callback to provide information about the connection ++ VCHI_CONNECTION_INFO connection_info; ++ ++ // Callback to notify that peer has requested disconnect ++ VCHI_CONNECTION_DISCONNECT disconnect; ++ ++ // Callback to notify that peer has requested power change ++ VCHI_CONNECTION_POWER_CONTROL power_control; ++ ++ // allocate memory suitably aligned for this connection ++ VCHI_BUFFER_ALLOCATE buffer_allocate; ++ ++ // free memory allocated by buffer_allocate ++ VCHI_BUFFER_FREE buffer_free; ++ ++}; ++ ++struct vchi_connection_t { ++ const VCHI_CONNECTION_API_T *api; ++ VCHI_CONNECTION_STATE_T *state; ++#ifdef VCHI_COARSE_LOCKING ++ VCOS_SEMAPHORE_T sem; ++#endif ++}; ++ ++ ++#endif /* CONNECTION_H_ */ ++ ++/****************************** End of file **********************************/ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,186 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _VCHI_MESSAGE_H_ ++#define _VCHI_MESSAGE_H_ ++ ++#include "interface/vchi/vchi_cfg_internal.h" ++#include "interface/vcos/vcos.h" ++#include "interface/vchi/vchi_common.h" ++ ++ ++typedef enum message_event_type { ++ MESSAGE_EVENT_NONE, ++ MESSAGE_EVENT_NOP, ++ MESSAGE_EVENT_MESSAGE, ++ MESSAGE_EVENT_SLOT_COMPLETE, ++ MESSAGE_EVENT_RX_BULK_PAUSED, ++ MESSAGE_EVENT_RX_BULK_COMPLETE, ++ MESSAGE_EVENT_TX_COMPLETE, ++ MESSAGE_EVENT_MSG_DISCARDED ++} MESSAGE_EVENT_TYPE_T; ++ ++typedef enum vchi_msg_flags ++{ ++ VCHI_MSG_FLAGS_NONE = 0x0, ++ VCHI_MSG_FLAGS_TERMINATE_DMA = 0x1 ++} VCHI_MSG_FLAGS_T; ++ ++typedef enum message_tx_channel ++{ ++ MESSAGE_TX_CHANNEL_MESSAGE = 0, ++ MESSAGE_TX_CHANNEL_BULK = 1 // drivers may provide multiple bulk channels, from 1 upwards ++} MESSAGE_TX_CHANNEL_T; ++ ++// Macros used for cycling through bulk channels ++#define MESSAGE_TX_CHANNEL_BULK_PREV(c) (MESSAGE_TX_CHANNEL_BULK+((c)-MESSAGE_TX_CHANNEL_BULK+VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION-1)%VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION) ++#define MESSAGE_TX_CHANNEL_BULK_NEXT(c) (MESSAGE_TX_CHANNEL_BULK+((c)-MESSAGE_TX_CHANNEL_BULK+1)%VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION) ++ ++typedef enum message_rx_channel ++{ ++ MESSAGE_RX_CHANNEL_MESSAGE = 0, ++ MESSAGE_RX_CHANNEL_BULK = 1 // drivers may provide multiple bulk channels, from 1 upwards ++} MESSAGE_RX_CHANNEL_T; ++ ++// Message receive slot information ++typedef struct rx_msg_slot_info { ++ ++ struct rx_msg_slot_info *next; ++ //struct slot_info *prev; ++#if !defined VCHI_COARSE_LOCKING ++ VCOS_SEMAPHORE_T sem; ++#endif ++ ++ uint8_t *addr; // base address of slot ++ uint32_t len; // length of slot in bytes ++ ++ uint32_t write_ptr; // hardware causes this to advance ++ uint32_t read_ptr; // this module does the reading ++ int active; // is this slot in the hardware dma fifo? ++ uint32_t msgs_parsed; // count how many messages are in this slot ++ uint32_t msgs_released; // how many messages have been released ++ void *state; // connection state information ++ uint8_t ref_count[VCHI_MAX_SERVICES_PER_CONNECTION]; // reference count for slots held by services ++} RX_MSG_SLOTINFO_T; ++ ++// The message driver no longer needs to know about the fields of RX_BULK_SLOTINFO_T - sort this out. ++// In particular, it mustn't use addr and len - they're the client buffer, but the message ++// driver will be tasked with sending the aligned core section. ++typedef struct rx_bulk_slotinfo_t { ++ struct rx_bulk_slotinfo_t *next; ++ ++ VCOS_SEMAPHORE_T *blocking; ++ ++ // needed by DMA ++ void *addr; ++ uint32_t len; ++ ++ // needed for the callback ++ void *service; ++ void *handle; ++ VCHI_FLAGS_T flags; ++} RX_BULK_SLOTINFO_T; ++ ++ ++/* ---------------------------------------------------------------------- ++ * each connection driver will have a pool of the following struct. ++ * ++ * the pool will be managed by vchi_qman_* ++ * this means there will be multiple queues (single linked lists) ++ * a given struct message_info will be on exactly one of these queues ++ * at any one time ++ * -------------------------------------------------------------------- */ ++typedef struct rx_message_info { ++ ++ struct message_info *next; ++ //struct message_info *prev; ++ ++ uint8_t *addr; ++ uint32_t len; ++ RX_MSG_SLOTINFO_T *slot; // points to whichever slot contains this message ++ uint32_t tx_timestamp; ++ uint32_t rx_timestamp; ++ ++} RX_MESSAGE_INFO_T; ++ ++typedef struct { ++ MESSAGE_EVENT_TYPE_T type; ++ ++ struct { ++ // for messages ++ void *addr; // address of message ++ uint16_t slot_delta; // whether this message indicated slot delta ++ uint32_t len; // length of message ++ RX_MSG_SLOTINFO_T *slot; // slot this message is in ++ vcos_fourcc_t service; // service id this message is destined for ++ uint32_t tx_timestamp; // timestamp from the header ++ uint32_t rx_timestamp; // timestamp when we parsed it ++ } message; ++ ++ // FIXME: cleanup slot reporting... ++ RX_MSG_SLOTINFO_T *rx_msg; ++ RX_BULK_SLOTINFO_T *rx_bulk; ++ void *tx_handle; ++ MESSAGE_TX_CHANNEL_T tx_channel; ++ ++} MESSAGE_EVENT_T; ++ ++ ++// callbacks ++typedef void VCHI_MESSAGE_DRIVER_EVENT_CALLBACK_T( void *state ); ++ ++typedef struct { ++ VCHI_MESSAGE_DRIVER_EVENT_CALLBACK_T *event_callback; ++} VCHI_MESSAGE_DRIVER_OPEN_T; ++ ++ ++// handle to this instance of message driver (as returned by ->open) ++typedef struct opaque_mhandle_t *VCHI_MDRIVER_HANDLE_T; ++ ++struct opaque_vchi_message_driver_t { ++ VCHI_MDRIVER_HANDLE_T *(*open)( VCHI_MESSAGE_DRIVER_OPEN_T *params, void *state ); ++ int32_t (*suspending)( VCHI_MDRIVER_HANDLE_T *handle ); ++ int32_t (*resumed)( VCHI_MDRIVER_HANDLE_T *handle ); ++ int32_t (*power_control)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T, vcos_bool_t enable ); ++ int32_t (*add_msg_rx_slot)( VCHI_MDRIVER_HANDLE_T *handle, RX_MSG_SLOTINFO_T *slot ); // rx message ++ int32_t (*add_bulk_rx)( VCHI_MDRIVER_HANDLE_T *handle, void *data, uint32_t len, RX_BULK_SLOTINFO_T *slot ); // rx data (bulk) ++ int32_t (*send)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel, const void *data, uint32_t len, VCHI_MSG_FLAGS_T flags, void *send_handle ); // tx (message & bulk) ++ void (*next_event)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_EVENT_T *event ); // get the next event from message_driver ++ int32_t (*enable)( VCHI_MDRIVER_HANDLE_T *handle ); ++ int32_t (*form_message)( VCHI_MDRIVER_HANDLE_T *handle, vcos_fourcc_t service_id, VCHI_MSG_VECTOR_T *vector, uint32_t count, void ++ *address, uint32_t length_avail, uint32_t max_total_length, vcos_bool_t pad_to_fill, vcos_bool_t allow_partial ); ++ ++ int32_t (*update_message)( VCHI_MDRIVER_HANDLE_T *handle, void *dest, int16_t *slot_count ); ++ int32_t (*buffer_aligned)( VCHI_MDRIVER_HANDLE_T *handle, int tx, int uncached, const void *address, const uint32_t length ); ++ void * (*allocate_buffer)( VCHI_MDRIVER_HANDLE_T *handle, uint32_t *length ); ++ void (*free_buffer)( VCHI_MDRIVER_HANDLE_T *handle, void *address ); ++ int (*rx_slot_size)( VCHI_MDRIVER_HANDLE_T *handle, int msg_size ); ++ int (*tx_slot_size)( VCHI_MDRIVER_HANDLE_T *handle, int msg_size ); ++ ++ vcos_bool_t (*tx_supports_terminate)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel ); ++ uint32_t (*tx_bulk_chunk_size)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel ); ++ int (*tx_alignment)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel ); ++ int (*rx_alignment)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_RX_CHANNEL_T channel ); ++ void (*form_bulk_aux)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel, const void *data, uint32_t len, uint32_t chunk_size, const void **aux_data, int32_t *aux_len ); ++ void (*debug)( VCHI_MDRIVER_HANDLE_T *handle ); ++}; ++ ++ ++#endif // _VCHI_MESSAGE_H_ ++ ++/****************************** End of file ***********************************/ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,214 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++Contains the #defines for the number of servers / clients etc, these can be ++over-ridden from the platform makefile if needed ++=============================================================================*/ ++ ++#ifndef VCHI_CFG_H_ ++#define VCHI_CFG_H_ ++ ++/**************************************************************************************** ++ * Defines in this first section are part of the VCHI API and may be examined by VCHI ++ * services. ++ ***************************************************************************************/ ++ ++/* Required alignment of base addresses for bulk transfer, if unaligned transfers are not enabled */ ++/* Really determined by the message driver, and should be available from a run-time call. */ ++#ifndef VCHI_BULK_ALIGN ++# if __VCCOREVER__ >= 0x04000000 ++# define VCHI_BULK_ALIGN 32 // Allows for the need to do cache cleans ++# else ++# define VCHI_BULK_ALIGN 16 ++# endif ++#endif ++ ++/* Required length multiple for bulk transfers, if unaligned transfers are not enabled */ ++/* May be less than or greater than VCHI_BULK_ALIGN */ ++/* Really determined by the message driver, and should be available from a run-time call. */ ++#ifndef VCHI_BULK_GRANULARITY ++# if __VCCOREVER__ >= 0x04000000 ++# define VCHI_BULK_GRANULARITY 32 // Allows for the need to do cache cleans ++# else ++# define VCHI_BULK_GRANULARITY 16 ++# endif ++#endif ++ ++/* The largest possible message to be queued with vchi_msg_queue. */ ++#ifndef VCHI_MAX_MSG_SIZE ++# if defined VCHI_LOCAL_HOST_PORT ++# define VCHI_MAX_MSG_SIZE 16384 // makes file transfers fast, but should they be using bulk? ++# else ++# define VCHI_MAX_MSG_SIZE 4096 // NOTE: THIS MUST BE LARGER THAN OR EQUAL TO THE SIZE OF THE KHRONOS MERGE BUFFER!! ++# endif ++#endif ++ ++/****************************************************************************************** ++ * Defines below are system configuration options, and should not be used by VCHI services. ++ *****************************************************************************************/ ++ ++/* How many connections can we support? A localhost implementation uses 2 connections, ++ * 1 for host-app, 1 for VMCS, and these are hooked together by a loopback MPHI VCFW ++ * driver. */ ++#ifndef VCHI_MAX_NUM_CONNECTIONS ++# define VCHI_MAX_NUM_CONNECTIONS 3 ++#endif ++ ++/* How many services can we open per connection? Extending this doesn't cost processing time, just a small ++ * amount of static memory. */ ++#ifndef VCHI_MAX_SERVICES_PER_CONNECTION ++# define VCHI_MAX_SERVICES_PER_CONNECTION 36 ++#endif ++ ++/* Adjust if using a message driver that supports more logical TX channels */ ++#ifndef VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION ++# define VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION 9 // 1 MPHI + 8 CCP2 logical channels ++#endif ++ ++/* Adjust if using a message driver that supports more logical RX channels */ ++#ifndef VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION ++# define VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION 1 // 1 MPHI ++#endif ++ ++/* How many receive slots do we use. This times VCHI_MAX_MSG_SIZE gives the effective ++ * receive queue space, less message headers. */ ++#ifndef VCHI_NUM_READ_SLOTS ++# if defined(VCHI_LOCAL_HOST_PORT) ++# define VCHI_NUM_READ_SLOTS 4 ++# else ++# define VCHI_NUM_READ_SLOTS 48 ++# endif ++#endif ++ ++/* Do we utilise overrun facility for receive message slots? Can aid peer transmit ++ * performance. Only define on VideoCore end, talking to host. ++ */ ++//#define VCHI_MSG_RX_OVERRUN ++ ++/* How many transmit slots do we use. Generally don't need many, as the hardware driver ++ * underneath VCHI will usually have its own buffering. */ ++#ifndef VCHI_NUM_WRITE_SLOTS ++# define VCHI_NUM_WRITE_SLOTS 4 ++#endif ++ ++/* If a service has held or queued received messages in VCHI_XOFF_THRESHOLD or more slots, ++ * then it's taking up too much buffer space, and the peer service will be told to stop ++ * transmitting with an XOFF message. For this to be effective, the VCHI_NUM_READ_SLOTS ++ * needs to be considerably bigger than VCHI_NUM_WRITE_SLOTS, or the transmit latency ++ * is too high. */ ++#ifndef VCHI_XOFF_THRESHOLD ++# define VCHI_XOFF_THRESHOLD (VCHI_NUM_READ_SLOTS / 2) ++#endif ++ ++/* After we've sent an XOFF, the peer will be told to resume transmission once the local ++ * service has dequeued/released enough messages that it's now occupying ++ * VCHI_XON_THRESHOLD slots or fewer. */ ++#ifndef VCHI_XON_THRESHOLD ++# define VCHI_XON_THRESHOLD (VCHI_NUM_READ_SLOTS / 4) ++#endif ++ ++/* A size below which a bulk transfer omits the handshake completely and always goes ++ * via the message channel, if bulk auxiliary is being sent on that service. (The user ++ * can guarantee this by enabling unaligned transmits). ++ * Not API. */ ++#ifndef VCHI_MIN_BULK_SIZE ++# define VCHI_MIN_BULK_SIZE ( VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096 ) ++#endif ++ ++/* Maximum size of bulk transmission chunks, for each interface type. A trade-off between ++ * speed and latency; the smaller the chunk size the better change of messages and other ++ * bulk transmissions getting in when big bulk transfers are happening. Set to 0 to not ++ * break transmissions into chunks. ++ */ ++#ifndef VCHI_MAX_BULK_CHUNK_SIZE_MPHI ++# define VCHI_MAX_BULK_CHUNK_SIZE_MPHI (16 * 1024) ++#endif ++ ++/* NB Chunked CCP2 transmissions violate the letter of the CCP2 spec by using "JPEG8" mode ++ * with multiple-line frames. Only use if the receiver can cope. */ ++#ifndef VCHI_MAX_BULK_CHUNK_SIZE_CCP2 ++# define VCHI_MAX_BULK_CHUNK_SIZE_CCP2 0 ++#endif ++ ++/* How many TX messages can we have pending in our transmit slots. Once exhausted, ++ * vchi_msg_queue will be blocked. */ ++#ifndef VCHI_TX_MSG_QUEUE_SIZE ++# define VCHI_TX_MSG_QUEUE_SIZE 256 ++#endif ++ ++/* How many RX messages can we have parsed in the receive slots. Once exhausted, parsing ++ * will be suspended until older messages are dequeued/released. */ ++#ifndef VCHI_RX_MSG_QUEUE_SIZE ++# define VCHI_RX_MSG_QUEUE_SIZE 256 ++#endif ++ ++/* Really should be able to cope if we run out of received message descriptors, by ++ * suspending parsing as the comment above says, but we don't. This sweeps the issue ++ * under the carpet. */ ++#if VCHI_RX_MSG_QUEUE_SIZE < (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS ++# undef VCHI_RX_MSG_QUEUE_SIZE ++# define VCHI_RX_MSG_QUEUE_SIZE (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS ++#endif ++ ++/* How many bulk transmits can we have pending. Once exhausted, vchi_bulk_queue_transmit ++ * will be blocked. */ ++#ifndef VCHI_TX_BULK_QUEUE_SIZE ++# define VCHI_TX_BULK_QUEUE_SIZE 64 ++#endif ++ ++/* How many bulk receives can we have pending. Once exhausted, vchi_bulk_queue_receive ++ * will be blocked. */ ++#ifndef VCHI_RX_BULK_QUEUE_SIZE ++# define VCHI_RX_BULK_QUEUE_SIZE 64 ++#endif ++ ++/* A limit on how many outstanding bulk requests we expect the peer to give us. If ++ * the peer asks for more than this, VCHI will fail and assert. The number is determined ++ * by the peer's hardware - it's the number of outstanding requests that can be queued ++ * on all bulk channels. VC3's MPHI peripheral allows 16. */ ++#ifndef VCHI_MAX_PEER_BULK_REQUESTS ++# define VCHI_MAX_PEER_BULK_REQUESTS 32 ++#endif ++ ++/* Define VCHI_CCP2TX_MANUAL_POWER if the host tells us when to turn the CCP2 ++ * transmitter on and off. ++ */ ++/*#define VCHI_CCP2TX_MANUAL_POWER*/ ++ ++#ifndef VCHI_CCP2TX_MANUAL_POWER ++ ++/* Timeout (in milliseconds) for putting the CCP2TX interface into IDLE state. Set ++ * negative for no IDLE. ++ */ ++# ifndef VCHI_CCP2TX_IDLE_TIMEOUT ++# define VCHI_CCP2TX_IDLE_TIMEOUT 5 ++# endif ++ ++/* Timeout (in milliseconds) for putting the CCP2TX interface into OFF state. Set ++ * negative for no OFF. ++ */ ++# ifndef VCHI_CCP2TX_OFF_TIMEOUT ++# define VCHI_CCP2TX_OFF_TIMEOUT 1000 ++# endif ++ ++#endif /* VCHI_CCP2TX_MANUAL_POWER */ ++ ++#endif /* VCHI_CFG_H_ */ ++ ++/****************************** End of file **********************************/ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,56 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHI_CFG_INTERNAL_H_ ++#define VCHI_CFG_INTERNAL_H_ ++ ++/**************************************************************************************** ++ * Control optimisation attempts. ++ ***************************************************************************************/ ++ ++// Don't use lots of short-term locks - use great long ones, reducing the overall locks-per-second ++#define VCHI_COARSE_LOCKING ++ ++// Avoid lock then unlock on exit from blocking queue operations (msg tx, bulk rx/tx) ++// (only relevant if VCHI_COARSE_LOCKING) ++#define VCHI_ELIDE_BLOCK_EXIT_LOCK ++ ++// Avoid lock on non-blocking peek ++// (only relevant if VCHI_COARSE_LOCKING) ++#define VCHI_AVOID_PEEK_LOCK ++ ++// Use one slot-handler thread per connection, rather than 1 thread dealing with all connections in rotation. ++#define VCHI_MULTIPLE_HANDLER_THREADS ++ ++// Put free descriptors onto the head of the free queue, rather than the tail, so that we don't thrash ++// our way through the pool of descriptors. ++#define VCHI_PUSH_FREE_DESCRIPTORS_ONTO_HEAD ++ ++// Don't issue a MSG_AVAILABLE callback for every single message. Possibly only safe if VCHI_COARSE_LOCKING. ++#define VCHI_FEWER_MSG_AVAILABLE_CALLBACKS ++ ++// Don't use message descriptors for TX messages that don't need them ++#define VCHI_MINIMISE_TX_MSG_DESCRIPTORS ++ ++// Nano-locks for multiqueue ++//#define VCHI_MQUEUE_NANOLOCKS ++ ++// Lock-free(er) dequeuing ++//#define VCHI_RX_NANOLOCKS ++ ++#endif /*VCHI_CFG_INTERNAL_H_*/ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_common.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_common.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_common.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_common.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,152 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++Contains global defs used by submodules within vchi. ++=============================================================================*/ ++ ++#ifndef VCHI_COMMON_H_ ++#define VCHI_COMMON_H_ ++ ++ ++//flags used when sending messages (must be bitmapped) ++typedef enum ++{ ++ VCHI_FLAGS_NONE = 0x0, ++ VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE = 0x1, // waits for message to be received, or sent (NB. not the same as being seen on other side) ++ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE = 0x2, // run a callback when message sent ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED = 0x4, // return once the transfer is in a queue ready to go ++ VCHI_FLAGS_ALLOW_PARTIAL = 0x8, ++ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ = 0x10, ++ VCHI_FLAGS_CALLBACK_WHEN_DATA_READ = 0x20, ++ ++ VCHI_FLAGS_ALIGN_SLOT = 0x000080, // internal use only ++ VCHI_FLAGS_BULK_AUX_QUEUED = 0x010000, // internal use only ++ VCHI_FLAGS_BULK_AUX_COMPLETE = 0x020000, // internal use only ++ VCHI_FLAGS_BULK_DATA_QUEUED = 0x040000, // internal use only ++ VCHI_FLAGS_BULK_DATA_COMPLETE = 0x080000, // internal use only ++ VCHI_FLAGS_INTERNAL = 0xFF0000 ++} VCHI_FLAGS_T; ++ ++// constants for vchi_crc_control() ++typedef enum { ++ VCHI_CRC_NOTHING = -1, ++ VCHI_CRC_PER_SERVICE = 0, ++ VCHI_CRC_EVERYTHING = 1, ++} VCHI_CRC_CONTROL_T; ++ ++//callback reasons when an event occurs on a service ++typedef enum ++{ ++ VCHI_CALLBACK_REASON_MIN, ++ ++ //This indicates that there is data available ++ //handle is the msg id that was transmitted with the data ++ // When a message is received and there was no FULL message available previously, send callback ++ // Tasks get kicked by the callback, reset their event and try and read from the fifo until it fails ++ VCHI_CALLBACK_MSG_AVAILABLE, ++ VCHI_CALLBACK_MSG_SENT, ++ VCHI_CALLBACK_MSG_SPACE_AVAILABLE, // XXX not yet implemented ++ ++ // This indicates that a transfer from the other side has completed ++ VCHI_CALLBACK_BULK_RECEIVED, ++ //This indicates that data queued up to be sent has now gone ++ //handle is the msg id that was used when sending the data ++ VCHI_CALLBACK_BULK_SENT, ++ VCHI_CALLBACK_BULK_RX_SPACE_AVAILABLE, // XXX not yet implemented ++ VCHI_CALLBACK_BULK_TX_SPACE_AVAILABLE, // XXX not yet implemented ++ ++ VCHI_CALLBACK_SERVICE_CLOSED, ++ ++ // this side has sent XOFF to peer due to lack of data consumption by service ++ // (suggests the service may need to take some recovery action if it has ++ // been deliberately holding off consuming data) ++ VCHI_CALLBACK_SENT_XOFF, ++ VCHI_CALLBACK_SENT_XON, ++ ++ // indicates that a bulk transfer has finished reading the source buffer ++ VCHI_CALLBACK_BULK_DATA_READ, ++ ++ // power notification events (currently host side only) ++ VCHI_CALLBACK_PEER_OFF, ++ VCHI_CALLBACK_PEER_SUSPENDED, ++ VCHI_CALLBACK_PEER_ON, ++ VCHI_CALLBACK_PEER_RESUMED, ++ VCHI_CALLBACK_FORCED_POWER_OFF, ++ ++#ifdef USE_VCHIQ_ARM ++ // some extra notifications provided by vchiq_arm ++ VCHI_CALLBACK_SERVICE_OPENED, ++ VCHI_CALLBACK_BULK_RECEIVE_ABORTED, ++ VCHI_CALLBACK_BULK_TRANSMIT_ABORTED, ++#endif ++ ++ VCHI_CALLBACK_REASON_MAX ++} VCHI_CALLBACK_REASON_T; ++ ++//Calback used by all services / bulk transfers ++typedef void (*VCHI_CALLBACK_T)( void *callback_param, //my service local param ++ VCHI_CALLBACK_REASON_T reason, ++ void *handle ); //for transmitting msg's only ++ ++ ++ ++/* ++ * Define vector struct for scatter-gather (vector) operations ++ * Vectors can be nested - if a vector element has negative length, then ++ * the data pointer is treated as pointing to another vector array, with ++ * '-vec_len' elements. Thus to append a header onto an existing vector, ++ * you can do this: ++ * ++ * void foo(const VCHI_MSG_VECTOR_T *v, int n) ++ * { ++ * VCHI_MSG_VECTOR_T nv[2]; ++ * nv[0].vec_base = my_header; ++ * nv[0].vec_len = sizeof my_header; ++ * nv[1].vec_base = v; ++ * nv[1].vec_len = -n; ++ * ... ++ * ++ */ ++typedef struct vchi_msg_vector { ++ const void *vec_base; ++ int32_t vec_len; ++} VCHI_MSG_VECTOR_T; ++ ++// Opaque type for a connection API ++typedef struct opaque_vchi_connection_api_t VCHI_CONNECTION_API_T; ++ ++// Opaque type for a message driver ++typedef struct opaque_vchi_message_driver_t VCHI_MESSAGE_DRIVER_T; ++ ++ ++// Iterator structure for reading ahead through received message queue. Allocated by client, ++// initialised by vchi_msg_look_ahead. Fields are for internal VCHI use only. ++// Iterates over messages in queue at the instant of the call to vchi_msg_lookahead - ++// will not proceed to messages received since. Behaviour is undefined if an iterator ++// is used again after messages for that service are removed/dequeued by any ++// means other than vchi_msg_iter_... calls on the iterator itself. ++typedef struct { ++ struct opaque_vchi_service_t *service; ++ void *last; ++ void *next; ++ void *remove; ++} VCHI_MSG_ITER_T; ++ ++ ++#endif // VCHI_COMMON_H_ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,347 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++Contains the protypes for the vchi functions. ++=============================================================================*/ ++ ++#ifndef VCHI_H_ ++#define VCHI_H_ ++ ++#include "interface/vcos/vcos.h" ++#include "interface/vchi/vchi_cfg.h" ++#include "interface/vchi/vchi_common.h" ++#include "interface/vchi/connections/connection.h" ++#include "vchi_mh.h" ++ ++ ++/****************************************************************************** ++ Global defs ++ *****************************************************************************/ ++ ++#define VCHI_BULK_ROUND_UP(x) ((((unsigned long)(x))+VCHI_BULK_ALIGN-1) & ~(VCHI_BULK_ALIGN-1)) ++#define VCHI_BULK_ROUND_DOWN(x) (((unsigned long)(x)) & ~(VCHI_BULK_ALIGN-1)) ++#define VCHI_BULK_ALIGN_NBYTES(x) (VCHI_BULK_ALIGNED(x) ? 0 : (VCHI_BULK_ALIGN - ((unsigned long)(x) & (VCHI_BULK_ALIGN-1)))) ++ ++#ifdef USE_VCHIQ_ARM ++#define VCHI_BULK_ALIGNED(x) 1 ++#else ++#define VCHI_BULK_ALIGNED(x) (((unsigned long)(x) & (VCHI_BULK_ALIGN-1)) == 0) ++#endif ++ ++ ++typedef enum ++{ ++ VCHI_VEC_POINTER, ++ VCHI_VEC_HANDLE, ++ VCHI_VEC_LIST ++} VCHI_MSG_VECTOR_TYPE_T; ++ ++typedef struct vchi_msg_vector_ex { ++ ++ VCHI_MSG_VECTOR_TYPE_T type; ++ union ++ { ++ // a memory handle ++ struct ++ { ++ VCHI_MEM_HANDLE_T handle; ++ uint32_t offset; ++ int32_t vec_len; ++ } handle; ++ ++ // an ordinary data pointer ++ struct ++ { ++ const void *vec_base; ++ int32_t vec_len; ++ } ptr; ++ ++ // a nested vector list ++ struct ++ { ++ struct vchi_msg_vector_ex *vec; ++ uint32_t vec_len; ++ } list; ++ } u; ++} VCHI_MSG_VECTOR_EX_T; ++ ++ ++// Construct an entry in a msg vector for a pointer (p) of length (l) ++#define VCHI_VEC_POINTER(p,l) VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } } ++ ++// Construct an entry in a msg vector for a message handle (h), starting at offset (o) of length (l) ++#define VCHI_VEC_HANDLE(h,o,l) VCHI_VEC_HANDLE, { { (h), (o), (l) } } ++ ++// Macros to manipulate fourcc_t values ++#define MAKE_FOURCC(x) ((fourcc_t)( (x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3] )) ++#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF,(x >> 16) & 0xFF,(x >> 8) & 0xFF, x & 0xFF ++ ++ ++// Opaque service information ++struct opaque_vchi_service_t; ++ ++// Descriptor for a held message. Allocated by client, initialised by vchi_msg_hold, ++// vchi_msg_iter_hold or vchi_msg_iter_hold_next. Fields are for internal VCHI use only. ++typedef struct ++{ ++ struct opaque_vchi_service_t *service; ++ void *message; ++} VCHI_HELD_MSG_T; ++ ++ ++ ++// structure used to provide the information needed to open a server or a client ++typedef struct { ++ vcos_fourcc_t service_id; ++ VCHI_CONNECTION_T *connection; ++ uint32_t rx_fifo_size; ++ uint32_t tx_fifo_size; ++ VCHI_CALLBACK_T callback; ++ void *callback_param; ++ vcos_bool_t want_unaligned_bulk_rx; // client intends to receive bulk transfers of odd lengths or into unaligned buffers ++ vcos_bool_t want_unaligned_bulk_tx; // client intends to transmit bulk transfers of odd lengths or out of unaligned buffers ++ vcos_bool_t want_crc; // client wants to check CRCs on (bulk) transfers. Only needs to be set at 1 end - will do both directions. ++} SERVICE_CREATION_T; ++ ++// Opaque handle for a VCHI instance ++typedef struct opaque_vchi_instance_handle_t *VCHI_INSTANCE_T; ++ ++// Opaque handle for a server or client ++typedef struct opaque_vchi_service_handle_t *VCHI_SERVICE_HANDLE_T; ++ ++// Service registration & startup ++typedef void (*VCHI_SERVICE_INIT)(VCHI_INSTANCE_T initialise_instance, VCHI_CONNECTION_T **connections, uint32_t num_connections); ++ ++typedef struct service_info_tag { ++ const char * const vll_filename; /* VLL to load to start this service. This is an empty string if VLL is "static" */ ++ VCHI_SERVICE_INIT init; /* Service initialisation function */ ++ void *vll_handle; /* VLL handle; NULL when unloaded or a "static VLL" in build */ ++} SERVICE_INFO_T; ++ ++/****************************************************************************** ++ Global funcs - implementation is specific to which side you are on (local / remote) ++ *****************************************************************************/ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection( const VCHI_CONNECTION_API_T * function_table, ++ const VCHI_MESSAGE_DRIVER_T * low_level); ++ ++ ++// Routine used to initialise the vchi on both local + remote connections ++extern int32_t vchi_initialise( VCHI_INSTANCE_T *instance_handle ); ++ ++extern int32_t vchi_exit( void ); ++ ++extern int32_t vchi_connect( VCHI_CONNECTION_T **connections, ++ const uint32_t num_connections, ++ VCHI_INSTANCE_T instance_handle ); ++ ++//When this is called, ensure that all services have no data pending. ++//Bulk transfers can remain 'queued' ++extern int32_t vchi_disconnect( VCHI_INSTANCE_T instance_handle ); ++ ++// Global control over bulk CRC checking ++extern int32_t vchi_crc_control( VCHI_CONNECTION_T *connection, ++ VCHI_CRC_CONTROL_T control ); ++ ++// helper functions ++extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length); ++extern void vchi_free_buffer(VCHI_SERVICE_HANDLE_T handle, void *address); ++extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle); ++ ++ ++/****************************************************************************** ++ Global service API ++ *****************************************************************************/ ++// Routine to create a named service ++extern int32_t vchi_service_create( VCHI_INSTANCE_T instance_handle, ++ SERVICE_CREATION_T *setup, ++ VCHI_SERVICE_HANDLE_T *handle ); ++ ++// Routine to destory a service ++extern int32_t vchi_service_destroy( const VCHI_SERVICE_HANDLE_T handle ); ++ ++// Routine to open a named service ++extern int32_t vchi_service_open( VCHI_INSTANCE_T instance_handle, ++ SERVICE_CREATION_T *setup, ++ VCHI_SERVICE_HANDLE_T *handle); ++ ++// Routine to close a named service ++extern int32_t vchi_service_close( const VCHI_SERVICE_HANDLE_T handle ); ++ ++// Routine to increment ref count on a named service ++extern int32_t vchi_service_use( const VCHI_SERVICE_HANDLE_T handle ); ++ ++// Routine to decrement ref count on a named service ++extern int32_t vchi_service_release( const VCHI_SERVICE_HANDLE_T handle ); ++ ++// Routine to send a message accross a service ++extern int32_t vchi_msg_queue( VCHI_SERVICE_HANDLE_T handle, ++ const void *data, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void *msg_handle ); ++ ++// scatter-gather (vector) and send message ++int32_t vchi_msg_queuev_ex( VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MSG_VECTOR_EX_T *vector, ++ uint32_t count, ++ VCHI_FLAGS_T flags, ++ void *msg_handle ); ++ ++// legacy scatter-gather (vector) and send message, only handles pointers ++int32_t vchi_msg_queuev( VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MSG_VECTOR_T *vector, ++ uint32_t count, ++ VCHI_FLAGS_T flags, ++ void *msg_handle ); ++ ++// Routine to receive a msg from a service ++// Dequeue is equivalent to hold, copy into client buffer, release ++extern int32_t vchi_msg_dequeue( VCHI_SERVICE_HANDLE_T handle, ++ void *data, ++ uint32_t max_data_size_to_read, ++ uint32_t *actual_msg_size, ++ VCHI_FLAGS_T flags ); ++ ++// Routine to look at a message in place. ++// The message is not dequeued, so a subsequent call to peek or dequeue ++// will return the same message. ++extern int32_t vchi_msg_peek( VCHI_SERVICE_HANDLE_T handle, ++ void **data, ++ uint32_t *msg_size, ++ VCHI_FLAGS_T flags ); ++ ++// Routine to remove a message after it has been read in place with peek ++// The first message on the queue is dequeued. ++extern int32_t vchi_msg_remove( VCHI_SERVICE_HANDLE_T handle ); ++ ++// Routine to look at a message in place. ++// The message is dequeued, so the caller is left holding it; the descriptor is ++// filled in and must be released when the user has finished with the message. ++extern int32_t vchi_msg_hold( VCHI_SERVICE_HANDLE_T handle, ++ void **data, // } may be NULL, as info can be ++ uint32_t *msg_size, // } obtained from HELD_MSG_T ++ VCHI_FLAGS_T flags, ++ VCHI_HELD_MSG_T *message_descriptor ); ++ ++// Initialise an iterator to look through messages in place ++extern int32_t vchi_msg_look_ahead( VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MSG_ITER_T *iter, ++ VCHI_FLAGS_T flags ); ++ ++/****************************************************************************** ++ Global service support API - operations on held messages and message iterators ++ *****************************************************************************/ ++ ++// Routine to get the address of a held message ++extern void *vchi_held_msg_ptr( const VCHI_HELD_MSG_T *message ); ++ ++// Routine to get the size of a held message ++extern int32_t vchi_held_msg_size( const VCHI_HELD_MSG_T *message ); ++ ++// Routine to get the transmit timestamp as written into the header by the peer ++extern uint32_t vchi_held_msg_tx_timestamp( const VCHI_HELD_MSG_T *message ); ++ ++// Routine to get the reception timestamp, written as we parsed the header ++extern uint32_t vchi_held_msg_rx_timestamp( const VCHI_HELD_MSG_T *message ); ++ ++// Routine to release a held message after it has been processed ++extern int32_t vchi_held_msg_release( VCHI_HELD_MSG_T *message ); ++ ++// Indicates whether the iterator has a next message. ++extern vcos_bool_t vchi_msg_iter_has_next( const VCHI_MSG_ITER_T *iter ); ++ ++// Return the pointer and length for the next message and advance the iterator. ++extern int32_t vchi_msg_iter_next( VCHI_MSG_ITER_T *iter, ++ void **data, ++ uint32_t *msg_size ); ++ ++// Remove the last message returned by vchi_msg_iter_next. ++// Can only be called once after each call to vchi_msg_iter_next. ++extern int32_t vchi_msg_iter_remove( VCHI_MSG_ITER_T *iter ); ++ ++// Hold the last message returned by vchi_msg_iter_next. ++// Can only be called once after each call to vchi_msg_iter_next. ++extern int32_t vchi_msg_iter_hold( VCHI_MSG_ITER_T *iter, ++ VCHI_HELD_MSG_T *message ); ++ ++// Return information for the next message, and hold it, advancing the iterator. ++extern int32_t vchi_msg_iter_hold_next( VCHI_MSG_ITER_T *iter, ++ void **data, // } may be NULL ++ uint32_t *msg_size, // } ++ VCHI_HELD_MSG_T *message ); ++ ++ ++/****************************************************************************** ++ Global bulk API ++ *****************************************************************************/ ++ ++// Routine to prepare interface for a transfer from the other side ++extern int32_t vchi_bulk_queue_receive( VCHI_SERVICE_HANDLE_T handle, ++ void *data_dst, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void *transfer_handle ); ++ ++ ++// Prepare interface for a transfer from the other side into relocatable memory. ++int32_t vchi_bulk_queue_receive_reloc( const VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T h_dst, ++ uint32_t offset, ++ uint32_t data_size, ++ const VCHI_FLAGS_T flags, ++ void * const bulk_handle ); ++ ++// Routine to queue up data ready for transfer to the other (once they have signalled they are ready) ++extern int32_t vchi_bulk_queue_transmit( VCHI_SERVICE_HANDLE_T handle, ++ const void *data_src, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void *transfer_handle ); ++ ++ ++/****************************************************************************** ++ Configuration plumbing ++ *****************************************************************************/ ++ ++// function prototypes for the different mid layers (the state info gives the different physical connections) ++extern const VCHI_CONNECTION_API_T *single_get_func_table( void ); ++//extern const VCHI_CONNECTION_API_T *local_server_get_func_table( void ); ++//extern const VCHI_CONNECTION_API_T *local_client_get_func_table( void ); ++ ++// declare all message drivers here ++const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table( void ); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++extern int32_t vchi_bulk_queue_transmit_reloc( VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T h_src, ++ uint32_t offset, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void *transfer_handle ); ++#endif /* VCHI_H_ */ ++ ++/****************************** End of file **********************************/ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_mh.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_mh.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_mh.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchi/vchi_mh.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,27 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHI_MH_H_ ++#define VCHI_MH_H_ ++ ++#include ++ ++typedef int32_t VCHI_MEM_HANDLE_T; ++#define VCHI_MEM_HANDLE_INVALID 0 ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,512 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++ ++#define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32) ++ ++#define VCHIQ_DOORBELL_IRQ IRQ_ARM_DOORBELL_0 ++#define VCHIQ_ARM_ADDRESS(x) ((void *)__virt_to_bus((unsigned)x)) ++ ++#include "vchiq_arm.h" ++#include "vchiq_2835.h" ++ ++#define MAX_FRAGMENTS (VCHIQ_NUM_CURRENT_BULKS * 2) ++ ++#define VCOS_LOG_CATEGORY (&vchiq_arm_log_category) ++ ++static char *g_slot_mem; ++static int g_slot_mem_size; ++dma_addr_t g_slot_phys; ++static FRAGMENTS_T *g_fragments_base; ++static FRAGMENTS_T *g_free_fragments; ++struct semaphore g_free_fragments_sema; ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) ++static DEFINE_SEMAPHORE(g_free_fragments_mutex); ++#else ++static DECLARE_MUTEX(g_free_fragments_mutex); ++#endif ++ ++static irqreturn_t ++vchiq_doorbell_irq(int irq, void *dev_id); ++ ++static int ++create_pagelist(char __user *buf, size_t count, unsigned short type, ++ struct task_struct *task, PAGELIST_T ** ppagelist); ++ ++static void ++free_pagelist(PAGELIST_T *pagelist, int actual); ++ ++int __init ++vchiq_platform_vcos_init(void) ++{ ++ return (vcos_init() == VCOS_SUCCESS) ? 0 : -EINVAL; ++} ++ ++int __init ++vchiq_platform_init(VCHIQ_STATE_T *state) ++{ ++ VCHIQ_SLOT_ZERO_T *vchiq_slot_zero; ++ int frag_mem_size; ++ int err; ++ int i; ++ ++ /* Allocate space for the channels in coherent memory */ ++ g_slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE); ++ frag_mem_size = PAGE_ALIGN(sizeof(FRAGMENTS_T) * MAX_FRAGMENTS); ++ ++ g_slot_mem = dma_alloc_coherent(NULL, g_slot_mem_size + frag_mem_size, ++ &g_slot_phys, GFP_ATOMIC); ++ ++ if (!g_slot_mem) { ++ vcos_log_error("Unable to allocate channel memory"); ++ err = -ENOMEM; ++ goto failed_alloc; ++ } ++ ++ vcos_assert(((int)g_slot_mem & (PAGE_SIZE - 1)) == 0); ++ ++ vchiq_slot_zero = vchiq_init_slots(g_slot_mem, g_slot_mem_size); ++ if (!vchiq_slot_zero) ++ { ++ err = -EINVAL; ++ goto failed_init_slots; ++ } ++ ++ vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX] = (int)g_slot_phys + g_slot_mem_size; ++ vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX] = MAX_FRAGMENTS; ++ ++ g_fragments_base = (FRAGMENTS_T *)(g_slot_mem + g_slot_mem_size); ++ g_slot_mem_size += frag_mem_size; ++ ++ g_free_fragments = g_fragments_base; ++ for (i = 0; i < (MAX_FRAGMENTS - 1); i++) { ++ *(FRAGMENTS_T **) & g_fragments_base[i] = ++ &g_fragments_base[i + 1]; ++ } ++ *(FRAGMENTS_T **) & g_fragments_base[i] = NULL; ++ sema_init(&g_free_fragments_sema, MAX_FRAGMENTS); ++ ++ if (vchiq_init_state(state, vchiq_slot_zero, 0/*slave*/) != ++ VCHIQ_SUCCESS) ++ { ++ err = -EINVAL; ++ goto failed_vchiq_init; ++ } ++ ++ err = request_irq(VCHIQ_DOORBELL_IRQ, vchiq_doorbell_irq, ++ IRQF_SAMPLE_RANDOM | IRQF_IRQPOLL, "VCHIQ doorbell", ++ state); ++ if (err < 0) ++ { ++ printk( KERN_ERR "%s: failed to register irq=%d err=%d\n", __func__, ++ VCHIQ_DOORBELL_IRQ, err ); ++ goto failed_request_irq; ++ } ++ ++ /* Send the base address of the slots to VideoCore */ ++ ++ dsb(); /* Ensure all writes have completed */ ++ ++ bcm_mailbox_write(MBOX_CHAN_VCHIQ, (unsigned int)g_slot_phys); ++ ++ vcos_log_info("vchiq_init - done (slots %x, phys %x)", ++ (unsigned int)vchiq_slot_zero, g_slot_phys); ++ ++ return 0; ++ ++failed_request_irq: ++failed_vchiq_init: ++failed_init_slots: ++ dma_free_coherent(NULL, g_slot_mem_size, g_slot_mem, g_slot_phys); ++ ++failed_alloc: ++ return err; ++} ++ ++void __exit ++vchiq_platform_exit(VCHIQ_STATE_T *state) ++{ ++ free_irq(VCHIQ_DOORBELL_IRQ, state); ++ dma_free_coherent(NULL, g_slot_mem_size, ++ g_slot_mem, g_slot_phys); ++} ++ ++void ++remote_event_signal(REMOTE_EVENT_T *event) ++{ ++ event->fired = 1; ++ ++ /* The test on the next line also ensures the write on the previous line ++ has completed */ ++ ++ if (event->armed) { ++ /* trigger vc interrupt */ ++ dsb(); /* data barrier operation */ ++ ++ writel(0, __io_address(ARM_0_BELL2)); ++ } ++} ++ ++int ++vchiq_copy_from_user(void *dst, const void *src, int size) ++{ ++ if ( (uint32_t)src < TASK_SIZE) ++ { ++ return copy_from_user(dst, src, size); ++ } ++ else ++ { ++ memcpy( dst, src, size ); ++ return 0; ++ } ++} ++ ++VCHIQ_STATUS_T ++vchiq_prepare_bulk_data(VCHIQ_BULK_T *bulk, VCHI_MEM_HANDLE_T memhandle, ++ void *offset, int size, int dir) ++{ ++ PAGELIST_T *pagelist; ++ int ret; ++ ++ vcos_assert(memhandle == VCHI_MEM_HANDLE_INVALID); ++ ++ ret = create_pagelist((char __user *)offset, size, ++ (dir == VCHIQ_BULK_RECEIVE) ++ ? PAGELIST_READ ++ : PAGELIST_WRITE, ++ current, ++ &pagelist); ++ if (ret != 0) ++ return VCHIQ_ERROR; ++ ++ bulk->handle = memhandle; ++ bulk->data = VCHIQ_ARM_ADDRESS(pagelist); ++ ++ /* Store the pagelist address in remote_data, which isn't used by the ++ slave. */ ++ bulk->remote_data = pagelist; ++ ++ return VCHIQ_SUCCESS; ++} ++ ++void ++vchiq_complete_bulk(VCHIQ_BULK_T *bulk) ++{ ++ free_pagelist((PAGELIST_T *)bulk->remote_data, bulk->actual); ++} ++ ++void ++vchiq_transfer_bulk(VCHIQ_BULK_T *bulk) ++{ ++ /* ++ * This should only be called on the master (VideoCore) side, but ++ * provide an implementation to avoid the need for ifdefery. ++ */ ++ vcos_assert(!"This code should not be called by the ARM on BCM2835"); ++} ++ ++void ++vchiq_dump_platform_state(void *dump_context) ++{ ++ char buf[80]; ++ int len; ++ len = vcos_snprintf(buf, sizeof(buf), ++ " Platform: 2835 (VC master)"); ++ vchiq_dump(dump_context, buf, len + 1); ++} ++ ++VCHIQ_STATUS_T ++vchiq_platform_suspend(VCHIQ_STATE_T *state) ++{ ++ vcos_unused(state); ++ vcos_assert_msg(0, "Suspend/resume not supported"); ++ return VCHIQ_ERROR; ++} ++ ++VCHIQ_STATUS_T ++vchiq_platform_resume(VCHIQ_STATE_T *state) ++{ ++ vcos_unused(state); ++ vcos_assert_msg(0, "Suspend/resume not supported"); ++ return VCHIQ_ERROR; ++} ++ ++void ++vchiq_platform_paused(VCHIQ_STATE_T *state) ++{ ++ vcos_unused(state); ++ vcos_assert_msg(0, "Suspend/resume not supported"); ++} ++ ++void ++vchiq_platform_resumed(VCHIQ_STATE_T *state) ++{ ++ vcos_unused(state); ++ vcos_assert_msg(0, "Suspend/resume not supported"); ++} ++ ++int ++vchiq_platform_videocore_wanted(VCHIQ_STATE_T* state) ++{ ++ vcos_unused(state); ++ return 1; // autosuspend not supported - videocore always wanted ++} ++ ++#if VCOS_HAVE_TIMER ++int ++vchiq_platform_use_suspend_timer(void) ++{ ++ return 0; ++} ++#endif ++void ++vchiq_dump_platform_use_state(VCHIQ_STATE_T *state) ++{ ++ vcos_unused(state); ++} ++ ++VCHIQ_STATUS_T ++vchiq_platform_init_state(VCHIQ_STATE_T *state) ++{ ++ vcos_unused(state); ++ return VCHIQ_SUCCESS; ++} ++ ++VCHIQ_ARM_STATE_T* ++vchiq_platform_get_arm_state(VCHIQ_STATE_T *state) ++{ ++ vcos_unused(state); ++ return NULL; ++} ++ ++/* ++ * Local functions ++ */ ++ ++static irqreturn_t ++vchiq_doorbell_irq(int irq, void *dev_id) ++{ ++ VCHIQ_STATE_T *state = dev_id; ++ irqreturn_t ret = IRQ_NONE; ++ unsigned int status; ++ ++ /* Read (and clear) the doorbell */ ++ status = readl(__io_address(ARM_0_BELL0)); ++ ++ if (status & 0x4) { /* Was the doorbell rung? */ ++ remote_event_pollall(state); ++ ret = IRQ_HANDLED; ++ } ++ ++ return ret; ++} ++ ++/* There is a potential problem with partial cache lines (pages?) ++ at the ends of the block when reading. If the CPU accessed anything in ++ the same line (page?) then it may have pulled old data into the cache, ++ obscuring the new data underneath. We can solve this by transferring the ++ partial cache lines separately, and allowing the ARM to copy into the ++ cached area. ++ ++ N.B. This implementation plays slightly fast and loose with the Linux ++ driver programming rules, e.g. its use of __virt_to_bus instead of ++ dma_map_single, but it isn't a multi-platform driver and it benefits ++ from increased speed as a result. ++ */ ++ ++static int ++create_pagelist(char __user *buf, size_t count, unsigned short type, ++ struct task_struct *task, PAGELIST_T ** ppagelist) ++{ ++ PAGELIST_T *pagelist; ++ struct page **pages; ++ struct page *page; ++ unsigned long *addrs; ++ unsigned int num_pages, offset, i; ++ char *addr, *base_addr, *next_addr; ++ int run, addridx, actual_pages; ++ ++ offset = (unsigned int)buf & (PAGE_SIZE - 1); ++ num_pages = (count + offset + PAGE_SIZE - 1) / PAGE_SIZE; ++ ++ *ppagelist = NULL; ++ ++ /* Allocate enough storage to hold the page pointers and the page list */ ++ pagelist = (PAGELIST_T *) kmalloc(sizeof(PAGELIST_T) + ++ (num_pages * sizeof(unsigned long)) + ++ (num_pages * sizeof(pages[0])), ++ GFP_KERNEL); ++ ++ vcos_log_trace("create_pagelist - %x", (unsigned int)pagelist); ++ if (!pagelist) ++ return -ENOMEM; ++ ++ addrs = pagelist->addrs; ++ pages = (struct page **)(addrs + num_pages); ++ ++ down_read(&task->mm->mmap_sem); ++ actual_pages = get_user_pages(task, task->mm, ++ (unsigned long)buf & ~(PAGE_SIZE - 1), num_pages, ++ (type == PAGELIST_READ) /*Write */ , 0 /*Force */ , ++ pages, NULL /*vmas */ ); ++ up_read(&task->mm->mmap_sem); ++ ++ if (actual_pages != num_pages) ++ { ++ for (i = 0; i < actual_pages; i++) { ++ page_cache_release(pages[i]); ++ } ++ kfree(pagelist); ++ return -EINVAL; ++ } ++ ++ pagelist->length = count; ++ pagelist->type = type; ++ pagelist->offset = offset; ++ ++ /* Group the pages into runs of contiguous pages */ ++ ++ base_addr = VCHIQ_ARM_ADDRESS(page_address(pages[0])); ++ next_addr = base_addr + PAGE_SIZE; ++ addridx = 0; ++ run = 0; ++ ++ for (i = 1; i < num_pages; i++) { ++ addr = VCHIQ_ARM_ADDRESS(page_address(pages[i])); ++ if ((addr == next_addr) && (run < (PAGE_SIZE - 1))) { ++ next_addr += PAGE_SIZE; ++ run++; ++ } else { ++ addrs[addridx] = (unsigned long)base_addr + run; ++ addridx++; ++ base_addr = addr; ++ next_addr = addr + PAGE_SIZE; ++ run = 0; ++ } ++ } ++ ++ addrs[addridx] = (unsigned long)base_addr + run; ++ addridx++; ++ ++ /* Partial cache lines (fragments) require special measures */ ++ if ((type == PAGELIST_READ) && ++ ((pagelist->offset & (CACHE_LINE_SIZE - 1)) || ++ ((pagelist->offset + pagelist->length) & (CACHE_LINE_SIZE - 1)))) { ++ FRAGMENTS_T *fragments; ++ ++ if (down_interruptible(&g_free_fragments_sema) != 0) { ++ kfree(pagelist); ++ return -EINTR; ++ } ++ ++ vcos_assert(g_free_fragments != NULL); ++ ++ down(&g_free_fragments_mutex); ++ fragments = (FRAGMENTS_T *) g_free_fragments; ++ vcos_assert(fragments != NULL); ++ g_free_fragments = *(FRAGMENTS_T **) g_free_fragments; ++ up(&g_free_fragments_mutex); ++ pagelist->type = ++ PAGELIST_READ_WITH_FRAGMENTS + (fragments - ++ g_fragments_base); ++ } ++ ++ for (page = virt_to_page(pagelist); ++ page <= virt_to_page(addrs + num_pages - 1); page++) { ++ flush_dcache_page(page); ++ } ++ ++ *ppagelist = pagelist; ++ ++ return 0; ++} ++ ++static void ++free_pagelist(PAGELIST_T *pagelist, int actual) ++{ ++ struct page **pages; ++ unsigned int num_pages, i; ++ ++ vcos_log_trace("free_pagelist - %x, %d", (unsigned int)pagelist, actual); ++ ++ num_pages = ++ (pagelist->length + pagelist->offset + PAGE_SIZE - 1) / PAGE_SIZE; ++ ++ pages = (struct page **)(pagelist->addrs + num_pages); ++ ++ /* Deal with any partial cache lines (fragments) */ ++ if (pagelist->type >= PAGELIST_READ_WITH_FRAGMENTS) { ++ FRAGMENTS_T *fragments = ++ g_fragments_base + (pagelist->type - ++ PAGELIST_READ_WITH_FRAGMENTS); ++ int head_bytes, tail_bytes; ++ ++ if (actual >= 0) ++ { ++ if ((head_bytes = (CACHE_LINE_SIZE - pagelist->offset) & (CACHE_LINE_SIZE - 1)) != 0) { ++ if (head_bytes > actual) ++ head_bytes = actual; ++ ++ memcpy((char *)page_address(pages[0]) + ++ pagelist->offset, fragments->headbuf, ++ head_bytes); ++ } ++ if ((head_bytes < actual) && ++ (tail_bytes = ++ (pagelist->offset + actual) & (CACHE_LINE_SIZE - ++ 1)) != 0) { ++ memcpy((char *)page_address(pages[num_pages - 1]) + ++ ((pagelist->offset + actual) & (PAGE_SIZE - ++ 1) & ~(CACHE_LINE_SIZE - 1)), ++ fragments->tailbuf, tail_bytes); ++ } ++ } ++ ++ down(&g_free_fragments_mutex); ++ *(FRAGMENTS_T **) fragments = g_free_fragments; ++ g_free_fragments = fragments; ++ up(&g_free_fragments_mutex); ++ up(&g_free_fragments_sema); ++ } ++ ++ for (i = 0; i < num_pages; i++) { ++ if (pagelist->type != PAGELIST_WRITE) ++ set_page_dirty(pages[i]); ++ page_cache_release(pages[i]); ++ } ++ ++ kfree(pagelist); ++} ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,27 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_2835_H ++#define VCHIQ_2835_H ++ ++#include "vchiq_pagelist.h" ++ ++#define VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX 0 ++#define VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX 1 ++ ++#endif /* VCHIQ_2835_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,1912 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vchiq_core.h" ++#include "vchiq_ioctl.h" ++#include "vchiq_arm.h" ++ ++#define DEVICE_NAME "vchiq" ++ ++/* Override the default prefix, which would be vchiq_arm (from the filename) */ ++#undef MODULE_PARAM_PREFIX ++#define MODULE_PARAM_PREFIX DEVICE_NAME "." ++ ++#define VCHIQ_MINOR 0 ++ ++/* Some per-instance constants */ ++#define MAX_COMPLETIONS 16 ++#define MAX_SERVICES 64 ++#define MAX_ELEMENTS 8 ++#define MSG_QUEUE_SIZE 64 ++ ++#define VCOS_LOG_CATEGORY (&vchiq_arm_log_category) ++ ++#define VCHIQ_ARM_VCSUSPEND_TASK_STACK 4096 ++ ++#if VCOS_HAVE_TIMER ++#define SUSPEND_TIMER_TIMEOUT_MS 100 ++static VCOS_TIMER_T g_suspend_timer; ++static void suspend_timer_callback(void *context); ++#endif ++ ++ ++typedef struct client_service_struct { ++ VCHIQ_SERVICE_T *service; ++ void *userdata; ++ VCHIQ_INSTANCE_T instance; ++ int handle; ++ int is_vchi; ++ volatile int dequeue_pending; ++ volatile int message_available_pos; ++ volatile int msg_insert; ++ volatile int msg_remove; ++ VCOS_EVENT_T insert_event; ++ VCOS_EVENT_T remove_event; ++ VCHIQ_HEADER_T *msg_queue[MSG_QUEUE_SIZE]; ++} USER_SERVICE_T; ++ ++struct vchiq_instance_struct { ++ VCHIQ_STATE_T *state; ++ VCHIQ_COMPLETION_DATA_T completions[MAX_COMPLETIONS]; ++ volatile int completion_insert; ++ volatile int completion_remove; ++ VCOS_EVENT_T insert_event; ++ VCOS_EVENT_T remove_event; ++ ++ USER_SERVICE_T services[MAX_SERVICES]; ++ ++ int connected; ++ int closing; ++ int pid; ++ int mark; ++}; ++ ++typedef struct dump_context_struct ++{ ++ char __user *buf; ++ size_t actual; ++ size_t space; ++ loff_t offset; ++} DUMP_CONTEXT_T; ++ ++VCOS_LOG_CAT_T vchiq_arm_log_category; ++ ++static struct cdev vchiq_cdev; ++static dev_t vchiq_devid; ++static VCHIQ_STATE_T g_state; ++static struct class *vchiq_class; ++static struct device *vchiq_dev; ++ ++static const char *ioctl_names[] = ++{ ++ "CONNECT", ++ "SHUTDOWN", ++ "CREATE_SERVICE", ++ "REMOVE_SERVICE", ++ "QUEUE_MESSAGE", ++ "QUEUE_BULK_TRANSMIT", ++ "QUEUE_BULK_RECEIVE", ++ "AWAIT_COMPLETION", ++ "DEQUEUE_MESSAGE", ++ "GET_CLIENT_ID", ++ "GET_CONFIG", ++ "CLOSE_SERVICE", ++ "USE_SERVICE", ++ "RELEASE_SERVICE", ++ "SET_SERVICE_OPTION", ++ "DUMP_PHYS_MEM" ++}; ++ ++vcos_static_assert(vcos_countof(ioctl_names) == (VCHIQ_IOC_MAX + 1)); ++ ++VCOS_LOG_LEVEL_T vchiq_default_arm_log_level = VCOS_LOG_ERROR; ++ ++static void ++dump_phys_mem( void *virt_addr, uint32_t num_bytes ); ++ ++/**************************************************************************** ++* ++* find_service_by_handle ++* ++***************************************************************************/ ++ ++static inline USER_SERVICE_T *find_service_by_handle( ++ VCHIQ_INSTANCE_T instance, int handle ) ++{ ++ USER_SERVICE_T *user_service; ++ ++ if (( handle >= 0 ) ++ && ( handle < MAX_SERVICES )) ++ { ++ user_service = &instance->services[ handle ]; ++ ++ if ( user_service->service != NULL ) ++ { ++ return user_service; ++ } ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* ++* find_avail_service_handle ++* ++***************************************************************************/ ++ ++static inline USER_SERVICE_T *find_avail_service_handle( ++ VCHIQ_INSTANCE_T instance) ++{ ++ int handle; ++ ++ for ( handle = 0; handle < MAX_SERVICES; handle++ ) ++ { ++ if ( instance->services[handle].service == NULL ) ++ { ++ instance->services[handle].instance = instance; ++ instance->services[handle].handle = handle; ++ ++ return &instance->services[handle]; ++ } ++ } ++ return NULL; ++} ++ ++/**************************************************************************** ++* ++* add_completion ++* ++***************************************************************************/ ++ ++static VCHIQ_STATUS_T ++add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason, ++ VCHIQ_HEADER_T *header, USER_SERVICE_T *service, void *bulk_userdata) ++{ ++ VCHIQ_COMPLETION_DATA_T *completion; ++ DEBUG_INITIALISE(g_state.local) ++ ++ while (instance->completion_insert == ++ (instance->completion_remove + MAX_COMPLETIONS)) { ++ /* Out of space - wait for the client */ ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ vcos_log_trace("add_completion - completion queue full"); ++ DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT); ++ if (vcos_event_wait(&instance->remove_event) != VCOS_SUCCESS) { ++ vcos_log_info("service_callback interrupted"); ++ return VCHIQ_RETRY; ++ } else if (instance->closing) { ++ vcos_log_info("service_callback closing"); ++ return VCHIQ_ERROR; ++ } ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ } ++ ++ completion = ++ &instance-> ++ completions[instance->completion_insert & (MAX_COMPLETIONS - 1)]; ++ ++ completion->header = header; ++ completion->reason = reason; ++ completion->service_userdata = service; ++ completion->bulk_userdata = bulk_userdata; ++ ++ /* A write barrier is needed here to ensure that the entire completion ++ record is written out before the insert point. */ ++ vcos_wmb(&completion->bulk_userdata); ++ ++ if (reason == VCHIQ_MESSAGE_AVAILABLE) ++ service->message_available_pos = instance->completion_insert; ++ instance->completion_insert++; ++ ++ vcos_event_signal(&instance->insert_event); ++ ++ return VCHIQ_SUCCESS; ++} ++ ++/**************************************************************************** ++* ++* service_callback ++* ++***************************************************************************/ ++ ++static VCHIQ_STATUS_T ++service_callback(VCHIQ_REASON_T reason, VCHIQ_HEADER_T *header, ++ VCHIQ_SERVICE_HANDLE_T handle, void *bulk_userdata) ++{ ++ /* How do we ensure the callback goes to the right client? ++ The service_user data points to a USER_SERVICE_T record containing the ++ original callback and the user state structure, which contains a circular ++ buffer for completion records. ++ */ ++ USER_SERVICE_T *service = ++ (USER_SERVICE_T *) VCHIQ_GET_SERVICE_USERDATA(handle); ++ VCHIQ_INSTANCE_T instance = service->instance; ++ DEBUG_INITIALISE(g_state.local) ++ ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ vcos_log_trace ++ ("service_callback - service %lx(%d), reason %d, header %lx, " ++ "instance %lx, bulk_userdata %lx", ++ (unsigned long)service, ((VCHIQ_SERVICE_T *) handle)->localport, ++ reason, (unsigned long)header, ++ (unsigned long)instance, (unsigned long)bulk_userdata); ++ ++ if (!instance || instance->closing) { ++ return VCHIQ_SUCCESS; ++ } ++ ++ if (header && service->is_vchi) ++ { ++ while (service->msg_insert == (service->msg_remove + MSG_QUEUE_SIZE)) ++ { ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ DEBUG_COUNT(MSG_QUEUE_FULL_COUNT); ++ vcos_log_trace("service_callback - msg queue full"); ++ /* If there is no MESSAGE_AVAILABLE in the completion queue, add one */ ++ if ((service->message_available_pos - instance->completion_remove) < 0) ++ { ++ VCHIQ_STATUS_T status; ++ vcos_log_warn("Inserting extra MESSAGE_AVAILABLE"); ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ status = add_completion(instance, reason, NULL, service, bulk_userdata); ++ if (status != VCHIQ_SUCCESS) ++ { ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ return status; ++ } ++ } ++ ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ if (vcos_event_wait(&service->remove_event) != VCOS_SUCCESS) { ++ vcos_log_info("service_callback interrupted"); ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ return VCHIQ_RETRY; ++ } else if (instance->closing) { ++ vcos_log_info("service_callback closing"); ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ return VCHIQ_ERROR; ++ } ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ } ++ ++ service->msg_queue[service->msg_insert & (MSG_QUEUE_SIZE - 1)] = ++ header; ++ ++ /* A write memory barrier is needed to ensure that the store of header ++ is completed before the insertion point is updated */ ++ vcos_wmb(&service->msg_queue[service->msg_insert & (MSG_QUEUE_SIZE - 1)]); ++ ++ service->msg_insert++; ++ vcos_event_signal(&service->insert_event); ++ ++ /* If there is a thread waiting in DEQUEUE_MESSAGE, or if ++ there is a MESSAGE_AVAILABLE in the completion queue then ++ bypass the completion queue. */ ++ if (((service->message_available_pos - instance->completion_remove) >= 0) || ++ service->dequeue_pending) ++ { ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ service->dequeue_pending = 0; ++ return VCHIQ_SUCCESS; ++ } ++ ++ header = NULL; ++ } ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ ++ return add_completion(instance, reason, header, service, bulk_userdata); ++} ++ ++/**************************************************************************** ++* ++* vchiq_ioctl ++* ++***************************************************************************/ ++ ++static long ++vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ VCHIQ_INSTANCE_T instance = file->private_data; ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ long ret = 0; ++ int i, rc; ++ DEBUG_INITIALISE(g_state.local) ++ ++ vcos_log_trace("vchiq_ioctl - instance %x, cmd %s, arg %lx", ++ (unsigned int)instance, ++ ((_IOC_TYPE(cmd) == VCHIQ_IOC_MAGIC) && (_IOC_NR(cmd) <= VCHIQ_IOC_MAX)) ? ++ ioctl_names[_IOC_NR(cmd)] : "", arg); ++ ++ switch (cmd) { ++ case VCHIQ_IOC_SHUTDOWN: ++ if (!instance->connected) ++ break; ++ ++ /* Remove all services */ ++ for (i = 0; i < MAX_SERVICES; i++) { ++ USER_SERVICE_T *service = &instance->services[i]; ++ if (service->service != NULL) { ++ status = vchiq_remove_service(&service->service->base); ++ if (status != VCHIQ_SUCCESS) ++ break; ++ service->service = NULL; ++ } ++ } ++ ++ if (status == VCHIQ_SUCCESS) { ++ /* Wake the completion thread and ask it to exit */ ++ instance->closing = 1; ++ vcos_event_signal(&instance->insert_event); ++ } ++ ++ break; ++ ++ case VCHIQ_IOC_CONNECT: ++ if (instance->connected) { ++ ret = -EINVAL; ++ break; ++ } ++ if ((rc=vcos_mutex_lock(&instance->state->mutex)) != VCOS_SUCCESS) { ++ vcos_log_error("vchiq: connect: could not lock mutex for state %d: %d", ++ instance->state->id, rc); ++ ret = -EINTR; ++ break; ++ } ++ status = vchiq_connect_internal(instance->state, instance); ++ vcos_mutex_unlock(&instance->state->mutex); ++ ++ if (status == VCHIQ_SUCCESS) ++ instance->connected = 1; ++ else ++ vcos_log_error("vchiq: could not connect: %d", status); ++ break; ++ ++ case VCHIQ_IOC_CREATE_SERVICE: ++ { ++ VCHIQ_CREATE_SERVICE_T args; ++ VCHIQ_SERVICE_T *service = NULL; ++ USER_SERVICE_T *user_service = NULL; ++ void *userdata; ++ int srvstate; ++ ++ if (copy_from_user ++ (&args, (const void __user *)arg, ++ sizeof(args)) != 0) { ++ ret = -EFAULT; ++ break; ++ } ++ ++ for (i = 0; i < MAX_SERVICES; i++) { ++ if (instance->services[i].service == NULL) { ++ user_service = &instance->services[i]; ++ break; ++ } ++ } ++ ++ if (!user_service) { ++ ret = -EMFILE; ++ break; ++ } ++ ++ if (args.is_open) { ++ if (instance->connected) ++ srvstate = VCHIQ_SRVSTATE_OPENING; ++ else { ++ ret = -ENOTCONN; ++ break; ++ } ++ } else { ++ srvstate = ++ instance->connected ? ++ VCHIQ_SRVSTATE_LISTENING : ++ VCHIQ_SRVSTATE_HIDDEN; ++ } ++ ++ vcos_mutex_lock(&instance->state->mutex); ++ ++ userdata = args.params.userdata; ++ args.params.callback = service_callback; ++ args.params.userdata = user_service; ++ service = ++ vchiq_add_service_internal(instance->state, ++ &args.params, srvstate, ++ instance); ++ ++ vcos_mutex_unlock(&instance->state->mutex); ++ ++ if (service != NULL) { ++ user_service->service = service; ++ user_service->userdata = userdata; ++ user_service->instance = instance; ++ user_service->handle = i; ++ user_service->is_vchi = args.is_vchi; ++ user_service->dequeue_pending = 0; ++ user_service->message_available_pos = instance->completion_remove - 1; ++ user_service->msg_insert = 0; ++ user_service->msg_remove = 0; ++ vcos_event_create(&user_service->insert_event, "insert_event"); ++ vcos_event_create(&user_service->remove_event, "remove_event"); ++ ++ if (args.is_open) { ++ status = ++ vchiq_open_service_internal ++ (service, instance->pid); ++ if (status != VCHIQ_SUCCESS) { ++ vchiq_remove_service ++ (&service->base); ++ ret = ++ (status == ++ VCHIQ_RETRY) ? -EINTR : ++ -EIO; ++ user_service->service = NULL; ++ user_service->instance = NULL; ++ vcos_event_delete(&user_service->insert_event); ++ vcos_event_delete(&user_service->remove_event); ++ break; ++ } ++ } ++ ++ if (copy_to_user((void __user *) ++ &(((VCHIQ_CREATE_SERVICE_T __user ++ *) arg)->handle), ++ (const void *)&user_service-> ++ handle, ++ sizeof(user_service-> ++ handle)) != 0) ++ ret = -EFAULT; ++ } else { ++ ret = -EEXIST; ++ } ++ } ++ break; ++ ++ case VCHIQ_IOC_CLOSE_SERVICE: ++ { ++ USER_SERVICE_T *user_service; ++ int handle = (int)arg; ++ ++ user_service = find_service_by_handle(instance, handle); ++ if (user_service != NULL) ++ { ++ int is_server = (user_service->service->public_fourcc != VCHIQ_FOURCC_INVALID); ++ ++ status = ++ vchiq_close_service(&user_service->service->base); ++ if ((status == VCHIQ_SUCCESS) && !is_server) ++ { ++ vcos_event_delete(&user_service->insert_event); ++ vcos_event_delete(&user_service->remove_event); ++ user_service->service = NULL; ++ } ++ } else ++ ret = -EINVAL; ++ } ++ break; ++ ++ case VCHIQ_IOC_REMOVE_SERVICE: ++ { ++ USER_SERVICE_T *user_service; ++ int handle = (int)arg; ++ ++ user_service = find_service_by_handle(instance, handle); ++ if (user_service != NULL) ++ { ++ status = ++ vchiq_remove_service(&user_service->service->base); ++ if (status == VCHIQ_SUCCESS) ++ { ++ vcos_event_delete(&user_service->insert_event); ++ vcos_event_delete(&user_service->remove_event); ++ user_service->service = NULL; ++ } ++ } else ++ ret = -EINVAL; ++ } ++ break; ++ ++ case VCHIQ_IOC_USE_SERVICE: ++ case VCHIQ_IOC_RELEASE_SERVICE: ++ { ++ USER_SERVICE_T *user_service; ++ int handle = (int)arg; ++ ++ user_service = find_service_by_handle(instance, handle); ++ if (user_service != NULL) ++ { ++ status = (cmd == VCHIQ_IOC_USE_SERVICE) ? vchiq_use_service(&user_service->service->base) : vchiq_release_service(&user_service->service->base); ++ if (status != VCHIQ_SUCCESS) ++ { ++ ret = -EINVAL; /* ??? */ ++ } ++ } ++ } ++ break; ++ ++ case VCHIQ_IOC_QUEUE_MESSAGE: ++ { ++ VCHIQ_QUEUE_MESSAGE_T args; ++ USER_SERVICE_T *user_service; ++ ++ if (copy_from_user ++ (&args, (const void __user *)arg, ++ sizeof(args)) != 0) { ++ ret = -EFAULT; ++ break; ++ } ++ user_service = find_service_by_handle(instance, args.handle); ++ if ((user_service != NULL) && (args.count <= MAX_ELEMENTS)) ++ { ++ /* Copy elements into kernel space */ ++ VCHIQ_ELEMENT_T elements[MAX_ELEMENTS]; ++ if (copy_from_user ++ (elements, args.elements, ++ args.count * sizeof(VCHIQ_ELEMENT_T)) == 0) ++ status = ++ vchiq_queue_message ++ (&user_service->service->base, ++ elements, args.count); ++ else ++ ret = -EFAULT; ++ } else { ++ ret = -EINVAL; ++ } ++ } ++ break; ++ ++ case VCHIQ_IOC_QUEUE_BULK_TRANSMIT: ++ case VCHIQ_IOC_QUEUE_BULK_RECEIVE: ++ { ++ VCHIQ_QUEUE_BULK_TRANSFER_T args; ++ USER_SERVICE_T *user_service; ++ VCHIQ_BULK_DIR_T dir = ++ (cmd == VCHIQ_IOC_QUEUE_BULK_TRANSMIT) ? ++ VCHIQ_BULK_TRANSMIT : VCHIQ_BULK_RECEIVE; ++ ++ if (copy_from_user ++ (&args, (const void __user *)arg, ++ sizeof(args)) != 0) { ++ ret = -EFAULT; ++ break; ++ } ++ user_service = find_service_by_handle(instance, args.handle); ++ if (user_service != NULL) ++ { ++ status = ++ vchiq_bulk_transfer ++ ((VCHIQ_SERVICE_T *)user_service->service, ++ VCHI_MEM_HANDLE_INVALID, ++ args.data, args.size, ++ args.userdata, args.mode, ++ dir); ++ } else { ++ ret = -EINVAL; ++ } ++ } ++ break; ++ ++ case VCHIQ_IOC_AWAIT_COMPLETION: ++ { ++ VCHIQ_AWAIT_COMPLETION_T args; ++ ++ DEBUG_TRACE(AWAIT_COMPLETION_LINE); ++ if (!instance->connected) { ++ ret = -ENOTCONN; ++ break; ++ } ++ ++ if (copy_from_user ++ (&args, (const void __user *)arg, ++ sizeof(args)) != 0) { ++ ret = -EFAULT; ++ break; ++ } ++ DEBUG_TRACE(AWAIT_COMPLETION_LINE); ++ while ((instance->completion_remove == ++ instance->completion_insert) ++ && !instance->closing) { ++ DEBUG_TRACE(AWAIT_COMPLETION_LINE); ++ if (vcos_event_wait(&instance->insert_event) != ++ VCOS_SUCCESS) { ++ DEBUG_TRACE(AWAIT_COMPLETION_LINE); ++ vcos_log_info ++ ("AWAIT_COMPLETION interrupted"); ++ ret = -EINTR; ++ break; ++ } ++ } ++ DEBUG_TRACE(AWAIT_COMPLETION_LINE); ++ ++ /* A read memory barrier is needed to stop prefetch of a stale ++ completion record */ ++ vcos_rmb(); ++ ++ if (ret == 0) { ++ int msgbufcount = args.msgbufcount; ++ for (ret = 0; ret < args.count; ret++) { ++ VCHIQ_COMPLETION_DATA_T *completion; ++ USER_SERVICE_T *service; ++ VCHIQ_HEADER_T *header; ++ if (instance->completion_remove == ++ instance->completion_insert) ++ break; ++ completion = ++ &instance-> ++ completions ++ [instance->completion_remove & ++ (MAX_COMPLETIONS - 1)]; ++ ++ service = (USER_SERVICE_T *)completion->service_userdata; ++ completion->service_userdata = service->userdata; ++ ++ header = completion->header; ++ if (header) ++ { ++ void __user *msgbuf; ++ int msglen; ++ ++ msglen = header->size + sizeof(VCHIQ_HEADER_T); ++ /* This must be a VCHIQ-style service */ ++ if (args.msgbufsize < msglen) ++ { ++ vcos_log_error("header %x: msgbufsize %x < msglen %x", ++ (unsigned int)header, args.msgbufsize, msglen); ++ vcos_assert(0); ++ if (ret == 0) ++ ret = -EMSGSIZE; ++ break; ++ } ++ if (msgbufcount <= 0) ++ { ++ /* Stall here for lack of a buffer for the message */ ++ break; ++ } ++ /* Get the pointer from user space */ ++ msgbufcount--; ++ if (copy_from_user(&msgbuf, ++ (const void __user *)&args.msgbufs[msgbufcount], ++ sizeof(msgbuf)) != 0) ++ { ++ if (ret == 0) ++ ret = -EFAULT; ++ break; ++ } ++ ++ /* Copy the message to user space */ ++ if (copy_to_user(msgbuf, header, msglen) != 0) ++ { ++ if (ret == 0) ++ ret = -EFAULT; ++ break; ++ } ++ ++ /* Now it has been copied, the message can be released. */ ++ vchiq_release_message(&service->service->base, header); ++ ++ /* The completion must point to the msgbuf */ ++ completion->header = msgbuf; ++ } ++ ++ if (copy_to_user ++ ((void __user *)((size_t) args.buf + ++ ret * ++ sizeof ++ (VCHIQ_COMPLETION_DATA_T)), ++ completion, ++ sizeof(VCHIQ_COMPLETION_DATA_T)) != ++ 0) { ++ if (ret == 0) ++ ret = -EFAULT; ++ break; ++ } ++ instance->completion_remove++; ++ } ++ ++ if (msgbufcount != args.msgbufcount) ++ { ++ if (copy_to_user((void __user *) ++ &((VCHIQ_AWAIT_COMPLETION_T *)arg)->msgbufcount, ++ &msgbufcount, sizeof(msgbufcount)) != 0) ++ { ++ ret = -EFAULT; ++ break; ++ } ++ } ++ } ++ ++ if (ret != 0) ++ vcos_event_signal(&instance->remove_event); ++ DEBUG_TRACE(AWAIT_COMPLETION_LINE); ++ } ++ break; ++ ++ case VCHIQ_IOC_DEQUEUE_MESSAGE: ++ { ++ VCHIQ_DEQUEUE_MESSAGE_T args; ++ USER_SERVICE_T *user_service; ++ VCHIQ_HEADER_T *header; ++ ++ DEBUG_TRACE(DEQUEUE_MESSAGE_LINE); ++ if (copy_from_user ++ (&args, (const void __user *)arg, ++ sizeof(args)) != 0) { ++ ret = -EFAULT; ++ break; ++ } ++ user_service = &instance->services[args.handle]; ++ if ((args.handle < 0) || (args.handle >= MAX_SERVICES) || ++ (user_service->service == NULL) || ++ (user_service->is_vchi == 0)) { ++ ret = -EINVAL; ++ break; ++ } ++ if (user_service->msg_remove == user_service->msg_insert) ++ { ++ if (!args.blocking) ++ { ++ DEBUG_TRACE(DEQUEUE_MESSAGE_LINE); ++ ret = -EWOULDBLOCK; ++ break; ++ } ++ user_service->dequeue_pending = 1; ++ do { ++ DEBUG_TRACE(DEQUEUE_MESSAGE_LINE); ++ if (vcos_event_wait(&user_service->insert_event) != ++ VCOS_SUCCESS) { ++ vcos_log_info("DEQUEUE_MESSAGE interrupted"); ++ ret = -EINTR; ++ break; ++ } ++ } ++ while (user_service->msg_remove == user_service->msg_insert); ++ } ++ ++ /* A read memory barrier is needed to stop prefetch of a stale ++ header value */ ++ vcos_rmb(); ++ ++ header = user_service->msg_queue[user_service->msg_remove & ++ (MSG_QUEUE_SIZE - 1)]; ++ if (header == NULL) ++ ret = -ENOTCONN; ++ else if (header->size <= args.bufsize) ++ { ++ /* Copy to user space if msgbuf is not NULL */ ++ if ((args.buf == NULL) || ++ (copy_to_user((void __user *)args.buf, header->data, ++ header->size) == 0)) ++ { ++ ret = header->size; ++ vchiq_release_message(&user_service->service->base, ++ header); ++ user_service->msg_remove++; ++ vcos_event_signal(&user_service->remove_event); ++ } ++ else ++ ret = -EFAULT; ++ } ++ else ++ { ++ vcos_log_error("header %x: bufsize %x < size %x", ++ (unsigned int)header, args.bufsize, header->size); ++ vcos_assert(0); ++ ret = -EMSGSIZE; ++ } ++ DEBUG_TRACE(DEQUEUE_MESSAGE_LINE); ++ } ++ break; ++ ++ case VCHIQ_IOC_GET_CLIENT_ID: ++ { ++ USER_SERVICE_T *user_service; ++ int handle = (int)arg; ++ ++ user_service = find_service_by_handle(instance, handle); ++ if (user_service != NULL) ++ ret = vchiq_get_client_id(&user_service->service->base); ++ else ++ ret = 0; ++ } ++ break; ++ ++ case VCHIQ_IOC_GET_CONFIG: ++ { ++ VCHIQ_GET_CONFIG_T args; ++ VCHIQ_CONFIG_T config; ++ ++ if (copy_from_user ++ (&args, (const void __user *)arg, ++ sizeof(args)) != 0) { ++ ret = -EFAULT; ++ break; ++ } ++ if (args.config_size > sizeof(config)) ++ { ++ ret = -EINVAL; ++ break; ++ } ++ status = vchiq_get_config(instance, args.config_size, &config); ++ if (status == VCHIQ_SUCCESS) ++ { ++ if (copy_to_user((void __user *)args.pconfig, ++ &config, args.config_size) != 0) ++ { ++ ret = -EFAULT; ++ break; ++ } ++ } ++ } ++ break; ++ ++ case VCHIQ_IOC_SET_SERVICE_OPTION: ++ { ++ VCHIQ_SET_SERVICE_OPTION_T args; ++ USER_SERVICE_T *user_service; ++ ++ if (copy_from_user( ++ &args, (const void __user *)arg, ++ sizeof(args)) != 0) ++ { ++ ret = -EFAULT; ++ break; ++ } ++ ++ user_service = find_service_by_handle(instance, args.handle); ++ if (user_service != NULL) ++ { ++ status = vchiq_set_service_option( ++ &user_service->service->base, ++ args.option, args.value); ++ } ++ else ++ { ++ ret = -EINVAL; ++ } ++ } ++ break; ++ ++ case VCHIQ_IOC_DUMP_PHYS_MEM: ++ { ++ VCHIQ_DUMP_MEM_T args; ++ ++ if (copy_from_user ++ (&args, (const void __user *)arg, ++ sizeof(args)) != 0) { ++ ret = -EFAULT; ++ break; ++ } ++ dump_phys_mem( args.virt_addr, args.num_bytes ); ++ } ++ break; ++ ++ ++ default: ++ ret = -ENOTTY; ++ break; ++ } ++ ++ if (ret == 0) { ++ if (status == VCHIQ_ERROR) ++ ret = -EIO; ++ else if (status == VCHIQ_RETRY) ++ ret = -EINTR; ++ } ++ ++ if ((ret < 0) && (ret != -EINTR) && (ret != -EWOULDBLOCK)) ++ vcos_log_warn(" ioctl instance %lx, cmd %s -> status %d, %ld", ++ (unsigned long)instance, ++ (_IOC_NR(cmd) <= VCHIQ_IOC_MAX) ? ioctl_names[_IOC_NR(cmd)] : ++ "", status, ret); ++ else ++ vcos_log_trace(" ioctl instance %lx, cmd %s -> status %d, %ld", ++ (unsigned long)instance, ++ (_IOC_NR(cmd) <= VCHIQ_IOC_MAX) ? ioctl_names[_IOC_NR(cmd)] : ++ "", status, ret); ++ ++ return ret; ++} ++ ++/**************************************************************************** ++* ++* vchiq_open ++* ++***************************************************************************/ ++ ++static int ++vchiq_open(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode) & 0x0f; ++ vcos_log_info("vchiq_open"); ++ switch (dev) { ++ case VCHIQ_MINOR: ++ { ++ VCHIQ_STATE_T *state = vchiq_get_state(); ++ VCHIQ_INSTANCE_T instance; ++ ++ if (!state) ++ { ++ vcos_log_error( "vchiq has no connection to VideoCore"); ++ return -ENOTCONN; ++ } ++ ++ instance = kzalloc(sizeof(*instance), GFP_KERNEL); ++ if (!instance) ++ return -ENOMEM; ++ ++ instance->state = state; ++ instance->pid = current->tgid; ++ vcos_event_create(&instance->insert_event, DEVICE_NAME); ++ vcos_event_create(&instance->remove_event, DEVICE_NAME); ++ ++ file->private_data = instance; ++ } ++ break; ++ ++ default: ++ vcos_log_error("Unknown minor device: %d", dev); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vchiq_release ++* ++***************************************************************************/ ++ ++static int ++vchiq_release(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode) & 0x0f; ++ int ret = 0; ++ switch (dev) { ++ case VCHIQ_MINOR: ++ { ++ VCHIQ_INSTANCE_T instance = file->private_data; ++ int i; ++ ++ vcos_log_info("vchiq_release: instance=%lx", ++ (unsigned long)instance); ++ ++ instance->closing = 1; ++ ++ /* Wake the slot handler if the completion queue is full */ ++ vcos_event_signal(&instance->remove_event); ++ ++ /* Mark all services for termination... */ ++ ++ for (i = 0; i < MAX_SERVICES; i++) { ++ USER_SERVICE_T *user_service = ++ &instance->services[i]; ++ if (user_service->service != NULL) ++ { ++ /* Wake the slot handler if the msg queue is full */ ++ vcos_event_signal(&user_service->remove_event); ++ ++ if ((user_service->service->srvstate != VCHIQ_SRVSTATE_CLOSEWAIT) && ++ (user_service->service->srvstate != VCHIQ_SRVSTATE_LISTENING)) ++ { ++ vchiq_terminate_service_internal(user_service->service); ++ } ++ } ++ } ++ ++ /* ...and wait for them to die */ ++ ++ for (i = 0; i < MAX_SERVICES; i++) { ++ USER_SERVICE_T *user_service = ++ &instance->services[i]; ++ if (user_service->service != NULL) ++ { ++ /* Wait in this non-portable fashion because interruptible ++ calls will not block in this context. */ ++ while ((user_service->service->srvstate != VCHIQ_SRVSTATE_CLOSEWAIT) && ++ (user_service->service->srvstate != VCHIQ_SRVSTATE_LISTENING)) ++ { ++ down(&user_service->service->remove_event); ++ } ++ ++ vchiq_free_service_internal ++ (user_service->service); ++ } ++ } ++ ++ vcos_event_delete(&instance->insert_event); ++ vcos_event_delete(&instance->remove_event); ++ ++ kfree(instance); ++ file->private_data = NULL; ++ } ++ break; ++ ++ default: ++ vcos_log_error("Unknown minor device: %d", dev); ++ ret = -ENXIO; ++ } ++ ++ return ret; ++} ++ ++/**************************************************************************** ++* ++* vchiq_dump ++* ++***************************************************************************/ ++ ++void ++vchiq_dump(void *dump_context, const char *str, int len) ++{ ++ DUMP_CONTEXT_T *context = (DUMP_CONTEXT_T *)dump_context; ++ ++ if ((context->actual >= 0) && (context->actual < context->space)) ++ { ++ int copy_bytes; ++ if (context->offset > 0) ++ { ++ int skip_bytes = vcos_min(len, context->offset); ++ str += skip_bytes; ++ len -= skip_bytes; ++ context->offset -= skip_bytes; ++ if (context->offset > 0) ++ return; ++ } ++ copy_bytes = vcos_min(len, context->space - context->actual); ++ if (copy_bytes == 0) ++ return; ++ if (copy_to_user(context->buf + context->actual, str, copy_bytes)) ++ context->actual = -EFAULT; ++ context->actual += copy_bytes; ++ len -= copy_bytes; ++ ++ /* If tne terminating NUL is included in the length, then it marks ++ * the end of a line and should be replaced with a carriage return. ++ */ ++ if ((len == 0) && (str[copy_bytes - 1] == '\0')) ++ { ++ char cr = '\n'; ++ if (copy_to_user(context->buf + context->actual - 1, &cr, 1)) ++ { ++ context->actual = -EFAULT; ++ } ++ } ++ } ++} ++ ++/**************************************************************************** ++* ++* vchiq_dump_platform_instance_state ++* ++***************************************************************************/ ++ ++void ++vchiq_dump_platform_instances(void *dump_context) ++{ ++ VCHIQ_STATE_T *state = vchiq_get_state(); ++ char buf[80]; ++ int len; ++ int i; ++ ++ /* There is no list of instances, so instead scan all services, ++ marking those that have been dumped. */ ++ ++ for (i = 0; i < state->unused_service; i++) ++ { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ VCHIQ_INSTANCE_T instance; ++ ++ if (service ++ && ((instance = service->instance) != NULL) ++ && (service->base.callback == service_callback)) ++ instance->mark = 0; ++ } ++ ++ for (i = 0; i < state->unused_service; i++) ++ { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ VCHIQ_INSTANCE_T instance; ++ ++ if (service ++ && ((instance = service->instance) != NULL) ++ && (service->base.callback == service_callback)) ++ { ++ if (!instance->mark) ++ { ++ len = vcos_snprintf(buf, sizeof(buf), ++ "Instance %x: pid %d,%s completions %d/%d", ++ (unsigned int)instance, instance->pid, ++ instance->connected ? " connected," : "", ++ instance->completion_insert - instance->completion_remove, ++ MAX_COMPLETIONS); ++ ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ instance->mark = 1; ++ } ++ } ++ } ++} ++ ++/**************************************************************************** ++* ++* vchiq_dump_platform_service_state ++* ++***************************************************************************/ ++ ++void ++vchiq_dump_platform_service_state(void *dump_context, VCHIQ_SERVICE_T *service) ++{ ++ USER_SERVICE_T *user_service = (USER_SERVICE_T *)service->base.userdata; ++ char buf[80]; ++ int len; ++ ++ len = vcos_snprintf(buf, sizeof(buf), " instance %x", ++ service->instance); ++ ++ if ((service->base.callback == service_callback) && user_service->is_vchi) ++ { ++ len += vcos_snprintf(buf + len, sizeof(buf) - len, ++ ", %d/%d messages", ++ user_service->msg_insert - user_service->msg_remove, ++ MSG_QUEUE_SIZE); ++ ++ if (user_service->dequeue_pending) ++ len += vcos_snprintf(buf + len, sizeof(buf) - len, ++ " (dequeue pending)"); ++ } ++ ++ vchiq_dump(dump_context, buf, len + 1); ++} ++ ++/**************************************************************************** ++* ++* dump_user_mem ++* ++***************************************************************************/ ++ ++static void ++dump_phys_mem( void *virt_addr, uint32_t num_bytes ) ++{ ++ int rc; ++ uint8_t *end_virt_addr = virt_addr + num_bytes; ++ int num_pages; ++ int offset; ++ int end_offset; ++ int page_idx; ++ int prev_idx; ++ struct page *page; ++ struct page **pages; ++ uint8_t *kmapped_virt_ptr; ++ ++ // Align virtAddr and endVirtAddr to 16 byte boundaries. ++ ++ virt_addr = (void *)((unsigned long)virt_addr & ~0x0fuL ); ++ end_virt_addr = (void *)(( (unsigned long)end_virt_addr + 15uL ) & ~0x0fuL); ++ ++ offset = (int)(long)virt_addr & ( PAGE_SIZE - 1 ); ++ end_offset = (int)(long)end_virt_addr & ( PAGE_SIZE - 1 ); ++ ++ num_pages = (offset + num_bytes + PAGE_SIZE - 1) / PAGE_SIZE; ++ ++ if (( pages = kmalloc( sizeof( struct page *) * num_pages, GFP_KERNEL )) == NULL ) ++ { ++ printk( KERN_ERR "Unable to allocation memory for %d pages\n", num_pages ); ++ return; ++ } ++ ++ down_read( ¤t->mm->mmap_sem ); ++ rc = get_user_pages( current, /* task */ ++ current->mm, /* mm */ ++ (unsigned long)virt_addr, /* start */ ++ num_pages, /* len */ ++ 0, /* write */ ++ 0, /* force */ ++ pages, /* pages (array of pointers to page) */ ++ NULL ); /* vmas */ ++ up_read( ¤t->mm->mmap_sem ); ++ ++ prev_idx = -1; ++ page = NULL; ++ ++ while ( offset < end_offset ) { ++ ++ int page_offset = offset % PAGE_SIZE; ++ page_idx = offset / PAGE_SIZE; ++ ++ if ( page_idx != prev_idx ) { ++ ++ if (page != NULL) { ++ kunmap( page ); ++ } ++ page = pages[page_idx]; ++ kmapped_virt_ptr = kmap( page ); ++ ++ prev_idx = page_idx; ++ } ++ ++ vcos_log_dump_mem_impl( &vchiq_arm_log_category, "ph", ++ (uint32_t)(unsigned long)&kmapped_virt_ptr[page_offset], ++ &kmapped_virt_ptr[page_offset], 16 ); ++ ++ offset += 16; ++ } ++ if (page != NULL) { ++ kunmap( page ); ++ } ++ ++ for ( page_idx = 0; page_idx < num_pages; page_idx++ ) { ++ page_cache_release( pages[page_idx] ); ++ } ++ kfree( pages ); ++} ++ ++/**************************************************************************** ++* ++* vchiq_read ++* ++***************************************************************************/ ++ ++static ssize_t ++vchiq_read(struct file * file, char __user * buf, ++ size_t count, loff_t *ppos) ++{ ++ DUMP_CONTEXT_T context; ++ context.buf = buf; ++ context.actual = 0; ++ context.space = count; ++ context.offset = *ppos; ++ ++ vchiq_dump_state(&context, &g_state); ++ ++ if (context.actual >= 0) ++ *ppos += context.actual; ++ ++ return context.actual; ++} ++ ++VCHIQ_STATE_T * ++vchiq_get_state(void) ++{ ++ ++ if (g_state.remote == NULL) ++ { ++ printk( "%s: g_state.remote == NULL\n", __func__ ); ++ } ++ else ++ { ++ if ( g_state.remote->initialised != 1) ++ { ++ printk( "%s: g_state.remote->initialised != 1 (%d)\n", __func__, g_state.remote->initialised ); ++ } ++ } ++ ++ return ((g_state.remote != NULL) && ++ (g_state.remote->initialised == 1)) ? &g_state : NULL; ++} ++ ++static const struct file_operations ++vchiq_fops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = vchiq_ioctl, ++ .open = vchiq_open, ++ .release = vchiq_release, ++ .read = vchiq_read ++}; ++ ++/* ++ * Autosuspend related functionality ++ */ ++ ++static int vchiq_videocore_wanted(VCHIQ_STATE_T* state) ++{ ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ if(!arm_state) ++ { // autosuspend not supported - always return wanted ++ return 1; ++ } ++ else if(!arm_state->videocore_use_count) ++ { // usage count zero - check for override ++ return vchiq_platform_videocore_wanted(state); ++ } ++ else ++ { // non-zero usage count - videocore still required ++ return 1; ++ } ++} ++ ++ ++/* Called by the lp thread */ ++static void * ++lp_func(void *v) ++{ ++ VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v; ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ ++ while (1) { ++ vcos_event_wait(&arm_state->lp_evt); ++ ++ vcos_mutex_lock(&arm_state->use_count_mutex); ++ if (!vchiq_videocore_wanted(state)) ++ { ++ arm_state->suspend_pending = 1; ++ } ++ vcos_mutex_unlock(&arm_state->use_count_mutex); ++ ++ vchiq_arm_vcsuspend(state); ++ } ++ return NULL; ++} ++/* Called by the hp thread */ ++static void * ++hp_func(void *v) ++{ ++ VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v; ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ int send_pending; ++ ++ while (1) { ++ vcos_event_wait(&arm_state->hp_evt); ++ ++ send_pending = 0; ++ ++ vcos_mutex_lock(&arm_state->use_count_mutex); ++ if (vchiq_videocore_wanted(state)) ++ { ++ vchiq_arm_vcresume(state); ++ } ++ if(arm_state->use_notify_pending) ++ { ++ send_pending = arm_state->use_notify_pending; ++ arm_state->use_notify_pending=0; ++ } ++ vcos_mutex_unlock(&arm_state->use_count_mutex); ++ while(send_pending--) ++ { ++ vcos_log_info( "%s sending VCHIQ_MSG_REMOTE_USE_ACTIVE", __func__); ++ if ( vchiq_send_remote_use_active(state) != VCHIQ_SUCCESS) ++ { ++ BUG(); /* vc should be resumed, so shouldn't be a problem sending message */ ++ } ++ } ++ } ++ return NULL; ++} ++ ++VCHIQ_STATUS_T ++vchiq_arm_init_state(VCHIQ_STATE_T* state, VCHIQ_ARM_STATE_T *arm_state) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ VCOS_THREAD_ATTR_T attrs; ++ char threadname[10]; ++ ++ if(arm_state) ++ { ++ vcos_mutex_create(&arm_state->use_count_mutex, "v.use_count_mutex"); ++ vcos_mutex_create(&arm_state->suspend_resume_mutex, "v.susp_res_mutex"); ++ ++ vcos_event_create(&arm_state->lp_evt, "LP_EVT"); ++ vcos_event_create(&arm_state->hp_evt, "HP_EVT"); ++ ++ vcos_thread_attr_init(&attrs); ++ vcos_thread_attr_setstacksize(&attrs, VCHIQ_ARM_VCSUSPEND_TASK_STACK); ++ vcos_thread_attr_setpriority(&attrs, VCOS_THREAD_PRI_LOWEST); ++ vcos_snprintf(threadname, sizeof(threadname), "VCHIQl-%d", state->id); ++ if(vcos_thread_create(&arm_state->lp_thread, threadname, &attrs, lp_func, state) != VCOS_SUCCESS) ++ { ++ vcos_log_error("vchiq: FATAL: couldn't create thread %s", threadname); ++ status = VCHIQ_ERROR; ++ } ++ else ++ { ++ vcos_thread_attr_init(&attrs); ++ vcos_thread_attr_setstacksize(&attrs, VCHIQ_ARM_VCSUSPEND_TASK_STACK); ++ vcos_thread_attr_setpriority(&attrs, VCOS_THREAD_PRI_HIGHEST); ++ vcos_snprintf(threadname, sizeof(threadname), "VCHIQh-%d", state->id); ++ ++ if(vcos_thread_create(&arm_state->hp_thread, threadname, &attrs, hp_func, state) != VCOS_SUCCESS) ++ { ++ vcos_log_error("vchiq: FATAL: couldn't create thread %s", threadname); ++ status = VCHIQ_ERROR; ++ } ++ } ++ } ++ return status; ++} ++ ++ ++VCHIQ_STATUS_T ++vchiq_arm_vcsuspend(VCHIQ_STATE_T *state) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ ++ if (state->conn_state != VCHIQ_CONNSTATE_CONNECTED) ++ return VCHIQ_ERROR; ++ ++ if(arm_state->suspend_pending) ++ { ++ vcos_mutex_lock(&arm_state->suspend_resume_mutex); ++ if(arm_state->videocore_suspended) ++ { ++ vcos_log_info("%s - already suspended", __func__); ++ } ++ else ++ { ++ vcos_log_info("%s - suspending", __func__); ++ ++ status = vchiq_platform_suspend(state); ++ arm_state->videocore_suspended = (status == VCHIQ_SUCCESS) ? 1 : 0; ++ ++ vcos_mutex_unlock(&arm_state->suspend_resume_mutex); ++ ++ vcos_mutex_lock(&arm_state->use_count_mutex); ++ if(!arm_state->suspend_pending) ++ { /* Something has changed the suspend_pending state while we were suspending. ++ Run the HP task to check if we need to resume */ ++ vcos_log_info( "%s trigger HP task to check resume", __func__); ++ vcos_event_signal(&arm_state->hp_evt); ++ } ++ arm_state->suspend_pending = 0; ++ vcos_mutex_unlock(&arm_state->use_count_mutex); ++ } ++ } ++ else ++ { ++ vchiq_check_resume(state); ++ } ++ return status; ++} ++ ++ ++VCHIQ_STATUS_T ++vchiq_arm_vcresume(VCHIQ_STATE_T *state) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ vcos_mutex_lock(&arm_state->suspend_resume_mutex); ++ ++ status = vchiq_platform_resume(state); ++ arm_state->videocore_suspended = (status == VCHIQ_RETRY) ? 1 : 0; ++ ++ vcos_mutex_unlock(&arm_state->suspend_resume_mutex); ++ ++ return status; ++} ++ ++void ++vchiq_check_resume(VCHIQ_STATE_T* state) ++{ ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ vcos_mutex_lock(&arm_state->use_count_mutex); ++ ++ if (arm_state->videocore_suspended && vchiq_videocore_wanted(state)) ++ { /* signal high priority task to resume vc */ ++ vcos_event_signal(&arm_state->hp_evt); ++ } ++ ++ vcos_mutex_unlock(&arm_state->use_count_mutex); ++} ++ ++void ++vchiq_check_suspend(VCHIQ_STATE_T* state) ++{ ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ ++ vcos_mutex_lock(&arm_state->use_count_mutex); ++ ++ if (!arm_state->videocore_suspended && !vchiq_videocore_wanted(state)) ++ { /* signal low priority task to suspend vc */ ++ vcos_event_signal(&arm_state->lp_evt); ++ } ++ ++ vcos_mutex_unlock(&arm_state->use_count_mutex); ++} ++ ++ ++ ++static VCHIQ_STATUS_T ++vchiq_use_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, int block_while_resume) ++{ ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ VCHIQ_STATUS_T ret = VCHIQ_SUCCESS; ++ char entity[10]; ++ int* entity_uc; ++ ++ if(arm_state) ++ { ++ vcos_mutex_lock(&arm_state->use_count_mutex); ++ ++ if (service) ++ { ++ sprintf(entity, "%c%c%c%c:%03d",VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc), service->client_id); ++ entity_uc = &service->service_use_count; ++ } ++ else ++ { ++ sprintf(entity, "PEER: "); ++ entity_uc = &arm_state->peer_use_count; ++ } ++ ++ if (!arm_state->videocore_suspended && !vchiq_videocore_wanted(state)) ++ { ++#if VCOS_HAVE_TIMER ++ if (vchiq_platform_use_suspend_timer()) ++ { ++ vcos_log_trace( "%s %s - cancel suspend timer", __func__, entity); ++ } ++ vcos_timer_cancel(&g_suspend_timer); ++#endif ++ } ++ ++ arm_state->videocore_use_count++; ++ (*entity_uc)++; ++ arm_state->suspend_pending = 0; ++ ++ if (arm_state->videocore_suspended && vchiq_videocore_wanted(state)) ++ { ++ vcos_log_info( "%s %s count %d, state count %d", __func__, entity, *entity_uc, arm_state->videocore_use_count); ++ if(block_while_resume) ++ { ++ ret = vchiq_arm_vcresume(state); ++ } ++ else ++ { ++ vcos_log_info( "%s trigger HP task to do resume", __func__); /* triggering is done below */ ++ } ++ } ++ else ++ { ++ vcos_log_trace( "%s %s count %d, state count %d", __func__, entity, *entity_uc, arm_state->videocore_use_count); ++ } ++ if(!block_while_resume) ++ { ++ arm_state->use_notify_pending++; ++ vcos_event_signal(&arm_state->hp_evt); /* hp task will check if we need to resume and also send use notify */ ++ } ++ ++ if (ret == VCHIQ_RETRY) ++ { /* if we're told to retry, decrement the counters. VCHIQ_ERROR probably means we're already resumed. */ ++ (*entity_uc)--; ++ arm_state->videocore_use_count--; ++ } ++ ++ vcos_mutex_unlock(&arm_state->use_count_mutex); ++ } ++ return ret; ++} ++ ++static VCHIQ_STATUS_T ++vchiq_release_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service) ++{ ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ VCHIQ_STATUS_T ret = VCHIQ_SUCCESS; ++ char entity[10]; ++ int* entity_uc; ++ ++ if(arm_state) ++ { ++ vcos_mutex_lock(&arm_state->use_count_mutex); ++ ++ if (service) ++ { ++ sprintf(entity, "%c%c%c%c:%03d",VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc), service->client_id); ++ entity_uc = &service->service_use_count; ++ } ++ else ++ { ++ sprintf(entity, "PEER: "); ++ entity_uc = &arm_state->peer_use_count; ++ } ++ ++ if (*entity_uc && arm_state->videocore_use_count) ++ { ++ arm_state->videocore_use_count--; ++ (*entity_uc)--; ++ ++ if (!vchiq_videocore_wanted(state)) ++ { ++#if VCOS_HAVE_TIMER ++ if (vchiq_platform_use_suspend_timer()) ++ { ++ vcos_log_trace( "%s %s count %d, state count %d - starting suspend timer", __func__, entity, *entity_uc, arm_state->videocore_use_count); ++ vcos_timer_cancel(&g_suspend_timer); ++ vcos_timer_set(&g_suspend_timer, SUSPEND_TIMER_TIMEOUT_MS); ++ } ++ else ++#endif ++ { ++ vcos_log_info( "%s %s count %d, state count %d - suspend pending", __func__, entity, *entity_uc, arm_state->videocore_use_count); ++ vcos_event_signal(&arm_state->lp_evt); /* kick the lp thread to do the suspend */ ++ } ++ } ++ else ++ { ++ vcos_log_trace( "%s %s count %d, state count %d", __func__, entity, *entity_uc, arm_state->videocore_use_count); ++ } ++ } ++ else ++ { ++ vcos_log_error( "%s %s ERROR releasing service; count %d, state count %d", __func__, entity, *entity_uc, arm_state->videocore_use_count); ++ ret = VCHIQ_ERROR; ++ } ++ ++ vcos_mutex_unlock(&arm_state->use_count_mutex); ++ } ++ return ret; ++} ++ ++VCHIQ_STATUS_T ++vchiq_on_remote_use(VCHIQ_STATE_T *state) ++{ ++ vcos_log_info("%s state %p", __func__, state); ++ return state ? vchiq_use_internal(state, NULL, 0) : VCHIQ_ERROR; ++} ++ ++VCHIQ_STATUS_T ++vchiq_on_remote_release(VCHIQ_STATE_T *state) ++{ ++ vcos_log_info("%s state %p", __func__, state); ++ return state ? vchiq_release_internal(state, NULL) : VCHIQ_ERROR; ++} ++ ++VCHIQ_STATUS_T ++vchiq_use_service_internal(VCHIQ_SERVICE_T *service) ++{ ++ VCHIQ_STATE_T* state = NULL; ++ ++ if (service) ++ { ++ state = service->state; ++ } ++ ++ if (!service || !state) ++ { ++ return VCHIQ_ERROR; ++ } ++ return vchiq_use_internal(state, service, 1); ++} ++ ++VCHIQ_STATUS_T ++vchiq_release_service_internal(VCHIQ_SERVICE_T *service) ++{ ++ VCHIQ_STATE_T* state = NULL; ++ ++ if (service) ++ { ++ state = service->state; ++ } ++ ++ if (!service || !state) ++ { ++ return VCHIQ_ERROR; ++ } ++ return vchiq_release_internal(state, service); ++} ++ ++ ++#if VCOS_HAVE_TIMER ++static void suspend_timer_callback(void* context) ++{ ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state((VCHIQ_STATE_T*)context); ++ vcos_log_info( "%s - suspend pending", __func__); ++ vcos_event_signal(&arm_state->lp_evt); ++} ++#endif ++ ++VCHIQ_STATUS_T ++vchiq_use_service(VCHIQ_SERVICE_HANDLE_T handle) ++{ ++ VCHIQ_STATUS_T ret = VCHIQ_ERROR; ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *) handle; ++ if (service) ++ { ++ ret = vchiq_use_service_internal(service); ++ } ++ return ret; ++} ++ ++VCHIQ_STATUS_T ++vchiq_release_service(VCHIQ_SERVICE_HANDLE_T handle) ++{ ++ VCHIQ_STATUS_T ret = VCHIQ_ERROR; ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *) handle; ++ if (service) ++ { ++ ret = vchiq_release_service_internal(service); ++ } ++ return ret; ++} ++ ++void ++vchiq_dump_service_use_state(VCHIQ_STATE_T *state) ++{ ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state); ++ int i; ++ if(arm_state) ++ { ++ vcos_mutex_lock(&arm_state->suspend_resume_mutex); ++ if (arm_state->videocore_suspended) ++ { ++ vcos_log_warn("--VIDEOCORE SUSPENDED--"); ++ } ++ else ++ { ++ vcos_log_warn("--VIDEOCORE AWAKE--"); ++ } ++ for (i = 0; i < state->unused_service; i++) { ++ VCHIQ_SERVICE_T *service_ptr = state->services[i]; ++ if (service_ptr && (service_ptr->srvstate != VCHIQ_SRVSTATE_FREE)) ++ { ++ if (service_ptr->service_use_count) ++ vcos_log_error("----- %c%c%c%c:%d service count %d <-- preventing suspend", VCHIQ_FOURCC_AS_4CHARS(service_ptr->base.fourcc), service_ptr->client_id, service_ptr->service_use_count); ++ else ++ vcos_log_warn("----- %c%c%c%c:%d service count 0", VCHIQ_FOURCC_AS_4CHARS(service_ptr->base.fourcc), service_ptr->client_id); ++ } ++ } ++ vcos_log_warn("----- PEER use count count %d", arm_state->peer_use_count); ++ vcos_log_warn("--- Overall vchiq instance use count %d", arm_state->videocore_use_count); ++ ++ vchiq_dump_platform_use_state(state); ++ ++ vcos_mutex_unlock(&arm_state->suspend_resume_mutex); ++ } ++} ++ ++VCHIQ_STATUS_T ++vchiq_check_service(VCHIQ_SERVICE_T * service) ++{ ++ VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(service->state); ++ VCHIQ_STATUS_T ret = VCHIQ_ERROR; ++ /* on 2835 vchiq does not have an arm_state */ ++ if (!arm_state) ++ return VCHIQ_SUCCESS; ++ if (service && arm_state) ++ { ++ vcos_mutex_lock(&arm_state->use_count_mutex); ++ if (!service->service_use_count) ++ { ++ vcos_log_error( "%s ERROR - %c%c%c%c:%d service count %d, state count %d, videocore_suspended %d", __func__,VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc), service->client_id, service->service_use_count, arm_state->videocore_use_count, arm_state->videocore_suspended); ++ vchiq_dump_service_use_state(service->state); ++ vcos_assert(0); // vcos_assert should kill the calling thread, so a user thread shouldn't be able to kill the kernel. ++ } ++ else ++ { ++ ret = VCHIQ_SUCCESS; ++ } ++ vcos_mutex_unlock(&arm_state->use_count_mutex); ++ } ++ return ret; ++} ++ ++/* stub functions */ ++void vchiq_on_remote_use_active(VCHIQ_STATE_T *state) ++{ ++ vcos_unused(state); ++} ++ ++void vchiq_platform_conn_state_changed(VCHIQ_STATE_T *state, VCHIQ_CONNSTATE_T oldstate, VCHIQ_CONNSTATE_T newstate) ++{ ++ vcos_unused(state); ++ vcos_unused(oldstate); ++ vcos_unused(oldstate); ++} ++ ++ ++/**************************************************************************** ++* ++* vchiq_init - called when the module is loaded. ++* ++***************************************************************************/ ++ ++static int __init ++vchiq_init(void) ++{ ++ int err; ++ void *ptr_err; ++ ++ err = vchiq_platform_vcos_init(); ++ if (err != 0) ++ goto failed_platform_vcos_init; ++ ++ vcos_log_set_level(VCOS_LOG_CATEGORY, vchiq_default_arm_log_level); ++ vcos_log_register("vchiq_arm", VCOS_LOG_CATEGORY); ++ ++ if ((err = ++ alloc_chrdev_region(&vchiq_devid, VCHIQ_MINOR, 1, ++ DEVICE_NAME)) != 0) { ++ vcos_log_error("Unable to allocate device number"); ++ goto failed_alloc_chrdev; ++ } ++ cdev_init(&vchiq_cdev, &vchiq_fops); ++ vchiq_cdev.owner = THIS_MODULE; ++ if ((err = cdev_add(&vchiq_cdev, vchiq_devid, 1)) != 0) { ++ vcos_log_error("Unable to register device"); ++ goto failed_cdev_add; ++ } ++ ++ /* create sysfs entries */ ++ vchiq_class = class_create(THIS_MODULE, DEVICE_NAME); ++ if (IS_ERR(ptr_err = vchiq_class)) ++ goto failed_class_create; ++ ++ vchiq_dev = device_create(vchiq_class, NULL, ++ vchiq_devid, NULL, "vchiq"); ++ if (IS_ERR(ptr_err = vchiq_dev)) ++ goto failed_device_create; ++ ++ err = vchiq_platform_init(&g_state); ++ if (err != 0) ++ goto failed_platform_init; ++ ++#if VCOS_HAVE_TIMER ++ vcos_timer_create( &g_suspend_timer, "suspend_timer", suspend_timer_callback, (void*)(&g_state)); ++#endif ++ ++ vcos_log_error("vchiq: initialised - version %d (min %d), device %d.%d", ++ VCHIQ_VERSION, VCHIQ_VERSION_MIN, ++ MAJOR(vchiq_devid), MINOR(vchiq_devid)); ++ ++ return 0; ++ ++failed_platform_init: ++ device_destroy(vchiq_class, vchiq_devid); ++failed_device_create: ++ class_destroy(vchiq_class); ++failed_class_create: ++ cdev_del(&vchiq_cdev); ++ err = PTR_ERR(ptr_err); ++failed_cdev_add: ++ unregister_chrdev_region(vchiq_devid, 1); ++failed_alloc_chrdev: ++failed_platform_vcos_init: ++ printk(KERN_WARNING "could not load vchiq\n"); ++ return err; ++} ++/**************************************************************************** ++* ++* vchiq_exit - called when the module is unloaded. ++* ++***************************************************************************/ ++ ++static void __exit ++vchiq_exit(void) ++{ ++ vchiq_platform_exit(&g_state); ++ device_destroy(vchiq_class, vchiq_devid); ++ class_destroy(vchiq_class); ++ cdev_del(&vchiq_cdev); ++ unregister_chrdev_region(vchiq_devid, 1); ++ vcos_log_unregister(VCOS_LOG_CATEGORY); ++} ++ ++module_init(vchiq_init); ++module_exit(vchiq_exit); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Broadcom Corporation"); +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,118 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_ARM_H ++#define VCHIQ_ARM_H ++ ++#include "vchiq_core.h" ++ ++ ++typedef struct vchiq_arm_state_struct { ++ ++ VCOS_THREAD_T lp_thread; /* processes low priority messages (eg suspend) */ ++ VCOS_THREAD_T hp_thread; /* processes high priority messages (eg resume) */ ++ ++ VCOS_EVENT_T lp_evt; ++ VCOS_EVENT_T hp_evt; ++ ++ VCOS_MUTEX_T use_count_mutex; ++ VCOS_MUTEX_T suspend_resume_mutex; ++ ++ int suspend_pending; ++ ++ /* Global use count for videocore. ++ * This is equal to the sum of the use counts for all services. When this hits ++ * zero the videocore suspend procedure will be initiated. */ ++ int videocore_use_count; ++ ++ /* Use count to track requests from videocore peer. ++ * This use count is not associated with a service, so needs to be tracked separately ++ * with the state. ++ */ ++ int peer_use_count; ++ ++ /* Flag to indicate whether videocore is currently suspended */ ++ int videocore_suspended; ++ ++ /* Flag to indicate whether a notification is pending back to videocore that it's ++ * "remote use request" has been actioned */ ++ int use_notify_pending; ++} VCHIQ_ARM_STATE_T; ++ ++ ++extern VCOS_LOG_CAT_T vchiq_arm_log_category; ++ ++extern int __init ++vchiq_platform_vcos_init(void); ++ ++extern int __init ++vchiq_platform_init(VCHIQ_STATE_T *state); ++ ++extern void __exit ++vchiq_platform_exit(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATE_T * ++vchiq_get_state(void); ++ ++extern VCHIQ_STATUS_T ++vchiq_arm_vcsuspend(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATUS_T ++vchiq_arm_vcresume(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATUS_T ++vchiq_arm_init_state(VCHIQ_STATE_T *state, VCHIQ_ARM_STATE_T *arm_state); ++ ++extern void ++vchiq_check_resume(VCHIQ_STATE_T* state); ++ ++extern void ++vchiq_check_suspend(VCHIQ_STATE_T* state); ++ ++extern VCHIQ_STATUS_T ++vchiq_use_service(VCHIQ_SERVICE_HANDLE_T handle); ++ ++extern VCHIQ_STATUS_T ++vchiq_release_service(VCHIQ_SERVICE_HANDLE_T handle); ++ ++extern VCHIQ_STATUS_T ++vchiq_check_service(VCHIQ_SERVICE_T * service); ++ ++extern VCHIQ_STATUS_T ++vchiq_platform_suspend(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATUS_T ++vchiq_platform_resume(VCHIQ_STATE_T *state); ++ ++extern int ++vchiq_platform_videocore_wanted(VCHIQ_STATE_T* state); ++ ++extern int ++vchiq_platform_use_suspend_timer(void); ++ ++extern void ++vchiq_dump_platform_use_state(VCHIQ_STATE_T *state); ++ ++extern void ++vchiq_dump_service_use_state(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_ARM_STATE_T* ++vchiq_platform_get_arm_state(VCHIQ_STATE_T *state); ++ ++ ++#endif /* VCHIQ_ARM_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,43 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_CFG_H ++#define VCHIQ_CFG_H ++ ++#define VCHIQ_MAGIC VCHIQ_MAKE_FOURCC('V','C','H','I') ++/* The version of VCHIQ - change with any non-trivial change */ ++#define VCHIQ_VERSION 2 ++/* The minimum compatible version - update to match VCHIQ_VERSION with any incompatible change */ ++#define VCHIQ_VERSION_MIN 2 ++ ++#define VCHIQ_MAX_SERVICES 4096 ++#define VCHIQ_MAX_SLOTS 128 ++#define VCHIQ_MAX_SLOTS_PER_SIDE 64 ++ ++#define VCHIQ_NUM_CURRENT_BULKS 32 ++#define VCHIQ_NUM_SERVICE_BULKS 4 ++ ++#ifndef VCHIQ_ENABLE_DEBUG ++#define VCHIQ_ENABLE_DEBUG 1 ++#endif ++ ++#ifndef VCHIQ_ENABLE_STATS ++#define VCHIQ_ENABLE_STATS 1 ++#endif ++ ++#endif /* VCHIQ_CFG_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,101 @@ ++/***************************************************************************** ++* Copyright 2001 - 2010 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include "vcos.h" ++#include "vchiq_connected.h" ++#include ++ ++#define MAX_CALLBACKS 10 ++ ++static int g_connected = 0; ++static int g_num_deferred_callbacks; ++static VCHIQ_CONNECTED_CALLBACK_T g_deferred_callback[ MAX_CALLBACKS ]; ++static VCOS_ONCE_T g_once_init; ++static VCOS_MUTEX_T g_connected_mutex; ++ ++extern VCOS_LOG_CAT_T vchiq_core_log_category; ++#define VCOS_LOG_CATEGORY (&vchiq_core_log_category) ++ ++/**************************************************************************** ++* ++* Function to initialize our lock. ++* ++***************************************************************************/ ++ ++static void connected_init( void ) ++{ ++ vcos_mutex_create( &g_connected_mutex, "connected_mutex"); ++} ++ ++/**************************************************************************** ++* ++* This function is used to defer initialization until the vchiq stack is ++* initialized. If the stack is already initialized, then the callback will ++* be made immediately, otherwise it will be deferred until ++* vchiq_call_connected_callbacks is called. ++* ++***************************************************************************/ ++ ++void vchiq_add_connected_callback( VCHIQ_CONNECTED_CALLBACK_T callback ) ++{ ++ vcos_once( &g_once_init, connected_init ); ++ ++ vcos_mutex_lock( &g_connected_mutex ); ++ ++ if ( g_connected ) ++ { ++ // We're already connected. Call the callback immediately. ++ ++ callback(); ++ } ++ else ++ { ++ if ( g_num_deferred_callbacks >= MAX_CALLBACKS ) ++ { ++ vcos_log_error( "There already %d callback registered - please increase MAX_CALLBACKS", ++ g_num_deferred_callbacks ); ++ } ++ else ++ { ++ g_deferred_callback[ g_num_deferred_callbacks ] = callback; ++ g_num_deferred_callbacks++; ++ } ++ } ++ vcos_mutex_unlock( &g_connected_mutex ); ++} ++ ++/**************************************************************************** ++* ++* This function is called by the vchiq stack once it has been connected to ++* the videocore and clients can start to use the stack. ++* ++***************************************************************************/ ++ ++void vchiq_call_connected_callbacks( void ) ++{ ++ int i; ++ ++ vcos_once( &g_once_init, connected_init ); ++ ++ vcos_mutex_lock( &g_connected_mutex ); ++ for ( i = 0; i < g_num_deferred_callbacks; i++ )\ ++ { ++ g_deferred_callback[i](); ++ } ++ g_num_deferred_callbacks = 0; ++ g_connected = 1; ++ vcos_mutex_unlock( &g_connected_mutex ); ++} ++ ++EXPORT_SYMBOL( vchiq_add_connected_callback ); +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,32 @@ ++/***************************************************************************** ++* Copyright 2001 - 2010 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef VCHIQ_CONNECTED_H ++#define VCHIQ_CONNECTED_H ++ ++/* ---- Include Files ----------------------------------------------------- */ ++ ++/* ---- Constants and Types ---------------------------------------------- */ ++ ++typedef void (*VCHIQ_CONNECTED_CALLBACK_T)( void ); ++ ++/* ---- Variable Externs ------------------------------------------------- */ ++ ++/* ---- Function Prototypes ---------------------------------------------- */ ++ ++void vchiq_add_connected_callback( VCHIQ_CONNECTED_CALLBACK_T callback ); ++void vchiq_call_connected_callbacks( void ); ++ ++#endif /* VCHIQ_CONNECTED_H */ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,2717 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include "vchiq_core.h" ++ ++#define VCHIQ_SLOT_HANDLER_STACK 8192 ++ ++#define SLOT_INFO_FROM_INDEX(state, index) (state->slot_info + (index)) ++#define SLOT_DATA_FROM_INDEX(state, index) (state->slot_data + (index)) ++#define SLOT_INDEX_FROM_DATA(state, data) (((unsigned int)((char *)data - (char *)state->slot_data)) / VCHIQ_SLOT_SIZE) ++#define SLOT_INDEX_FROM_INFO(state, info) ((unsigned int)(info - state->slot_info)) ++#define SLOT_QUEUE_INDEX_FROM_POS(pos) ((int)((unsigned int)(pos) / VCHIQ_SLOT_SIZE)) ++ ++#define VCOS_LOG_CATEGORY (&vchiq_core_log_category) ++ ++#define BULK_INDEX(x) (x & (VCHIQ_NUM_SERVICE_BULKS - 1)) ++ ++ ++/* Used to check use counts allow vchiq use. */ ++extern VCHIQ_STATUS_T vchiq_check_service(VCHIQ_SERVICE_T * service); ++ ++ ++typedef struct bulk_waiter_struct ++{ ++ VCOS_EVENT_T event; ++ int actual; ++} BULK_WAITER_T; ++ ++typedef struct vchiq_open_payload_struct{ ++ int fourcc; ++ int client_id; ++ short version; ++ short version_min; ++} VCHIQ_OPEN_PAYLOAD_T; ++ ++vcos_static_assert(sizeof(VCHIQ_HEADER_T) == 8); /* we require this for consistency between endpoints */ ++vcos_static_assert(IS_POW2(sizeof(VCHIQ_HEADER_T))); ++vcos_static_assert(IS_POW2(VCHIQ_NUM_CURRENT_BULKS)); ++vcos_static_assert(IS_POW2(VCHIQ_NUM_SERVICE_BULKS)); ++ ++VCOS_LOG_CAT_T vchiq_core_log_category; ++VCOS_LOG_CAT_T vchiq_core_msg_log_category; ++VCOS_LOG_LEVEL_T vchiq_default_core_log_level = VCOS_LOG_WARN; ++VCOS_LOG_LEVEL_T vchiq_default_core_msg_log_level = VCOS_LOG_WARN; ++ ++static const char *const srvstate_names[] = ++{ ++ "FREE", ++ "HIDDEN", ++ "LISTENING", ++ "OPENING", ++ "OPEN", ++ "CLOSESENT", ++ "CLOSING", ++ "CLOSEWAIT" ++}; ++ ++static const char *const reason_names[] = ++{ ++ "SERVICE_OPENED", ++ "SERVICE_CLOSED", ++ "MESSAGE_AVAILABLE", ++ "BULK_TRANSMIT_DONE", ++ "BULK_RECEIVE_DONE", ++ "BULK_TRANSMIT_ABORTED", ++ "BULK_RECEIVE_ABORTED" ++}; ++ ++static const char *const conn_state_names[] = ++{ ++ "DISCONNECTED", ++ "CONNECTED", ++ "PAUSING", ++ "PAUSE_SENT", ++ "PAUSED", ++ "RESUMING" ++}; ++ ++static const char *msg_type_str( unsigned int msg_type ) ++{ ++ switch (msg_type) { ++ case VCHIQ_MSG_PADDING: return "PADDING"; ++ case VCHIQ_MSG_CONNECT: return "CONNECT"; ++ case VCHIQ_MSG_OPEN: return "OPEN"; ++ case VCHIQ_MSG_OPENACK: return "OPENACK"; ++ case VCHIQ_MSG_CLOSE: return "CLOSE"; ++ case VCHIQ_MSG_DATA: return "DATA"; ++ case VCHIQ_MSG_BULK_RX: return "BULK_RX"; ++ case VCHIQ_MSG_BULK_TX: return "BULK_TX"; ++ case VCHIQ_MSG_BULK_RX_DONE: return "BULK_RX_DONE"; ++ case VCHIQ_MSG_BULK_TX_DONE: return "BULK_TX_DONE"; ++ case VCHIQ_MSG_PAUSE: return "PAUSE"; ++ case VCHIQ_MSG_RESUME: return "RESUME"; ++ } ++ return "???"; ++} ++ ++static inline void ++vchiq_set_service_state(VCHIQ_SERVICE_T *service, int newstate) ++{ ++ vcos_log_info("%d: srv:%d %s->%s", service->state->id, service->localport, ++ srvstate_names[service->srvstate], ++ srvstate_names[newstate]); ++ service->srvstate = newstate; ++} ++ ++static inline int ++is_valid_service(VCHIQ_SERVICE_T *service) ++{ ++ return ((service != NULL) && ++ (service->srvstate != VCHIQ_SRVSTATE_FREE)); ++} ++ ++static inline VCHIQ_STATUS_T ++make_service_callback(VCHIQ_SERVICE_T *service, VCHIQ_REASON_T reason, ++ VCHIQ_HEADER_T *header, void *bulk_userdata) ++{ ++ vcos_log_trace("%d: callback:%d (%s, %x, %x)", service->state->id, ++ service->localport, reason_names[reason], ++ (unsigned int)header, (unsigned int)bulk_userdata); ++ return service->base.callback(reason, header, &service->base, bulk_userdata); ++} ++ ++static inline void ++vchiq_set_conn_state(VCHIQ_STATE_T *state, VCHIQ_CONNSTATE_T newstate) ++{ ++ VCHIQ_CONNSTATE_T oldstate = state->conn_state; ++ vcos_log_info("%d: %s->%s", state->id, ++ conn_state_names[oldstate], ++ conn_state_names[newstate]); ++ state->conn_state = newstate; ++ vchiq_platform_conn_state_changed(state, oldstate, newstate); ++} ++ ++static inline void ++remote_event_create(REMOTE_EVENT_T *event) ++{ ++ event->armed = 0; ++ /* Don't clear the 'fired' flag because it may already have been set by the other side */ ++ vcos_event_create(event->event, "vchiq"); ++} ++ ++static inline void ++remote_event_destroy(REMOTE_EVENT_T *event) ++{ ++ vcos_event_delete(event->event); ++} ++ ++static inline int ++remote_event_wait(REMOTE_EVENT_T *event) ++{ ++ if (!event->fired) ++ { ++ event->armed = 1; ++ if (event->fired) /* Also ensures the write has completed */ ++ event->armed = 0; ++ else if (vcos_event_wait(event->event) != VCOS_SUCCESS) ++ return 0; ++ } ++ ++ event->fired = 0; ++ return 1; ++} ++ ++static inline void ++remote_event_signal_local(REMOTE_EVENT_T *event) ++{ ++ event->armed = 0; ++ vcos_event_signal(event->event); ++} ++ ++static inline void ++remote_event_poll(REMOTE_EVENT_T *event) ++{ ++ if (event->armed) ++ remote_event_signal_local(event); ++} ++ ++void ++remote_event_pollall(VCHIQ_STATE_T *state) ++{ ++ remote_event_poll(&state->local->trigger); ++ remote_event_poll(&state->local->recycle); ++} ++ ++/* Round up message sizes so that any space at the end of a slot is always big ++ enough for a header. This relies on header size being a power of two, which ++ has been verified earlier by a static assertion. */ ++ ++static inline unsigned int ++calc_stride(unsigned int size) ++{ ++ /* Allow room for the header */ ++ size += sizeof(VCHIQ_HEADER_T); ++ ++ /* Round up */ ++ return (size + sizeof(VCHIQ_HEADER_T) - 1) & ~(sizeof(VCHIQ_HEADER_T) - 1); ++} ++ ++static VCHIQ_SERVICE_T * ++get_listening_service(VCHIQ_STATE_T *state, int fourcc) ++{ ++ int i; ++ ++ vcos_assert(fourcc != VCHIQ_FOURCC_INVALID); ++ ++ for (i = 0; i < state->unused_service; i++) ++ { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ if (service && ++ (service->public_fourcc == fourcc) && ++ ((service->srvstate == VCHIQ_SRVSTATE_LISTENING) || ++ ((service->srvstate == VCHIQ_SRVSTATE_OPEN) && ++ (service->remoteport == VCHIQ_PORT_FREE)))) ++ return service; ++ } ++ ++ return NULL; ++} ++ ++static VCHIQ_SERVICE_T * ++get_connected_service(VCHIQ_STATE_T *state, unsigned int port) ++{ ++ int i; ++ for (i = 0; i < state->unused_service; i++) { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ if (service && (service->srvstate == VCHIQ_SRVSTATE_OPEN) ++ && (service->remoteport == port)) { ++ return service; ++ } ++ } ++ return NULL; ++} ++ ++static inline void ++request_poll(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, int poll_type) ++{ ++ if (service) ++ { ++ vcos_atomic_flags_or(&service->poll_flags, (1 << poll_type)); ++ vcos_atomic_flags_or(&state->poll_services[service->localport>>5], ++ (1 <<(service->localport & 0x1f))); ++ } ++ ++ state->poll_needed = 1; ++ vcos_wmb(&state->poll_needed); ++ ++ /* ... and ensure the slot handler runs. */ ++ remote_event_signal_local(&state->local->trigger); ++} ++ ++/* Called from queue_message, by the slot handler and application threads, ++ with slot_mutex held */ ++static VCHIQ_HEADER_T * ++reserve_space(VCHIQ_STATE_T *state, int space, int is_blocking) ++{ ++ VCHIQ_SHARED_STATE_T *local = state->local; ++ int tx_pos = state->local_tx_pos; ++ int slot_space = VCHIQ_SLOT_SIZE - (tx_pos & VCHIQ_SLOT_MASK); ++ ++ if (space > slot_space) { ++ VCHIQ_HEADER_T *header; ++ /* Fill the remaining space with padding */ ++ vcos_assert(state->tx_data != NULL); ++ header = (VCHIQ_HEADER_T *) (state->tx_data + (tx_pos & VCHIQ_SLOT_MASK)); ++ header->msgid = VCHIQ_MSGID_PADDING; ++ header->size = slot_space - sizeof(VCHIQ_HEADER_T); ++ ++ tx_pos += slot_space; ++ } ++ ++ /* If necessary, get the next slot. */ ++ if ((tx_pos & VCHIQ_SLOT_MASK) == 0) ++ { ++ int slot_index; ++ ++ /* If there is no free slot... */ ++ if (tx_pos == (state->slot_queue_available * VCHIQ_SLOT_SIZE)) ++ { ++ /* ...wait for one. */ ++ VCHIQ_STATS_INC(state, slot_stalls); ++ ++ /* But first, flush through the last slot. */ ++ local->tx_pos = tx_pos; ++ remote_event_signal(&state->remote->trigger); ++ ++ do { ++ if (!is_blocking || ++ (vcos_event_wait(&state->slot_available_event) != VCOS_SUCCESS)) ++ { ++ return NULL; /* No space available now */ ++ } ++ } ++ while (tx_pos == (state->slot_queue_available * VCHIQ_SLOT_SIZE)); ++ } ++ ++ slot_index = local->slot_queue[SLOT_QUEUE_INDEX_FROM_POS(tx_pos) & VCHIQ_SLOT_QUEUE_MASK]; ++ state->tx_data = (char *)SLOT_DATA_FROM_INDEX(state, slot_index); ++ } ++ ++ state->local_tx_pos = tx_pos + space; ++ ++ return (VCHIQ_HEADER_T *)(state->tx_data + (tx_pos & VCHIQ_SLOT_MASK)); ++} ++ ++/* Called with slot_mutex held */ ++static void ++process_free_queue(VCHIQ_STATE_T *state) ++{ ++ VCHIQ_SHARED_STATE_T *local = state->local; ++ BITSET_T service_found[BITSET_SIZE(VCHIQ_MAX_SERVICES)]; ++ int slot_queue_available; ++ ++ /* Use a read memory barrier to ensure that any state that may have ++ been modified by another thread is not masked by stale prefetched ++ values. */ ++ vcos_rmb(); ++ ++ /* Find slots which have been freed by the other side, and return them to ++ the available queue. */ ++ slot_queue_available = state->slot_queue_available; ++ ++ while (slot_queue_available != local->slot_queue_recycle) ++ { ++ unsigned int pos; ++ int slot_index = local->slot_queue[slot_queue_available++ & VCHIQ_SLOT_QUEUE_MASK]; ++ char *data = (char *)SLOT_DATA_FROM_INDEX(state, slot_index); ++ ++ vcos_log_trace("%d: pfq %d=%x %x %x", state->id, slot_index, ++ (unsigned int)data, local->slot_queue_recycle, ++ slot_queue_available); ++ ++ /* Initialise the bitmask for services which have used this slot */ ++ BITSET_ZERO(service_found); ++ ++ pos = 0; ++ ++ while (pos < VCHIQ_SLOT_SIZE) ++ { ++ VCHIQ_HEADER_T *header = (VCHIQ_HEADER_T *)(data + pos); ++ int msgid = header->msgid; ++ if (VCHIQ_MSG_TYPE(msgid) == VCHIQ_MSG_DATA) ++ { ++ int port = VCHIQ_MSG_SRCPORT(msgid); ++ VCHIQ_SERVICE_QUOTA_T *service_quota = ++ &state->service_quotas[port]; ++ int count; ++ count = service_quota->message_use_count; ++ if (count > 0) ++ { ++ service_quota->message_use_count = count - 1; ++ if (count == service_quota->message_quota) ++ { ++ /* Signal the service that it has dropped below its quota */ ++ vcos_event_signal(&service_quota->quota_event); ++ } ++ } ++ else ++ { ++ vcos_log_error("service %d message_use_count=%d (header %x," ++ " msgid %x, header->msgid %x, header->size %x)", ++ port, service_quota->message_use_count, ++ (unsigned int)header, msgid, header->msgid, ++ header->size); ++ vcos_assert(0); ++ } ++ if (!BITSET_IS_SET(service_found, port)) ++ { ++ /* Set the found bit for this service */ ++ BITSET_SET(service_found, port); ++ ++ count = service_quota->slot_use_count; ++ if (count > 0) ++ { ++ service_quota->slot_use_count = count - 1; ++ /* Signal the service in case it has dropped below its quota */ ++ vcos_event_signal(&service_quota->quota_event); ++ vcos_log_trace("%d: pfq:%d %x@%x - slot_use->%d", ++ state->id, port, ++ header->size, (unsigned int)header, ++ service_quota->slot_use_count); ++ } ++ else ++ { ++ vcos_log_error("service %d slot_use_count=%d (header %x," ++ " msgid %x, header->msgid %x, header->size %x)", ++ port, service_quota->slot_use_count, ++ (unsigned int)header, msgid, header->msgid, ++ header->size); ++ vcos_assert(0); ++ } ++ } ++ } ++ ++ pos += calc_stride(header->size); ++ if (pos > VCHIQ_SLOT_SIZE) ++ { ++ vcos_log_error("pfq - pos %x: header %x, msgid %x, header->msgid %x, header->size %x", ++ pos, (unsigned int)header, msgid, header->msgid, header->size); ++ vcos_assert(0); ++ } ++ } ++ } ++ ++ if (slot_queue_available != state->slot_queue_available) ++ { ++ state->slot_queue_available = slot_queue_available; ++ vcos_wmb(&state->slot_queue_available); ++ vcos_event_signal(&state->slot_available_event); ++ } ++} ++ ++/* Called by the slot handler and application threads */ ++static VCHIQ_STATUS_T ++queue_message(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, ++ int msgid, const VCHIQ_ELEMENT_T *elements, ++ int count, int size, int is_blocking) ++{ ++ VCHIQ_SHARED_STATE_T *local; ++ VCHIQ_SERVICE_QUOTA_T *service_quota = NULL; ++ VCHIQ_HEADER_T *header; ++ ++ unsigned int stride; ++ ++ local = state->local; ++ ++ stride = calc_stride(size); ++ ++ vcos_assert(stride <= VCHIQ_SLOT_SIZE); ++ ++ /* On platforms where vcos_mutex_lock cannot fail, the return will never ++ be taken and the compiler may optimise out that code. Let Coverity ++ know this is intentional. ++ */ ++ /* coverity[constant_expression_result] */ ++ if ((VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_RESUME) && ++ (vcos_mutex_lock(&state->slot_mutex) != VCOS_SUCCESS)) ++ return VCHIQ_RETRY; ++ ++ if (service) ++ { ++ int tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos + stride - 1); ++ ++ if (service->srvstate != VCHIQ_SRVSTATE_OPEN) ++ { ++ /* The service has been closed, probably while waiting for the mutex */ ++ vcos_mutex_unlock(&state->slot_mutex); ++ return VCHIQ_ERROR; ++ } ++ ++ service_quota = &state->service_quotas[service->localport]; ++ ++ /* ...ensure it doesn't use more than its quota of messages or slots */ ++ while ((service_quota->message_use_count == service_quota->message_quota) || ++ ((tx_end_index != service_quota->previous_tx_index) && ++ (service_quota->slot_use_count == service_quota->slot_quota))) ++ { ++ vcos_log_trace("%d: qm:%d %s,%x - quota stall (msg %d, slot %d)", ++ state->id, service->localport, ++ msg_type_str(VCHIQ_MSG_TYPE(msgid)), size, ++ service_quota->message_use_count, service_quota->slot_use_count); ++ VCHIQ_SERVICE_STATS_INC(service, quota_stalls); ++ vcos_mutex_unlock(&state->slot_mutex); ++ if (vcos_event_wait(&service_quota->quota_event) != VCOS_SUCCESS) ++ return VCHIQ_RETRY; ++ if (vcos_mutex_lock(&state->slot_mutex) != VCOS_SUCCESS) ++ return VCHIQ_RETRY; ++ tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos + stride - 1); ++ } ++ } ++ ++ header = reserve_space(state, stride, is_blocking); ++ ++ if (!header) { ++ if (service) ++ VCHIQ_SERVICE_STATS_INC(service, slot_stalls); ++ vcos_mutex_unlock(&state->slot_mutex); ++ return VCHIQ_RETRY; ++ } ++ ++ if (service) { ++ int i, pos; ++ int tx_end_index; ++ ++ vcos_log_info("%d: qm %s@%x,%x (%d->%d)", state->id, ++ msg_type_str(VCHIQ_MSG_TYPE(msgid)), ++ (unsigned int)header, size, ++ VCHIQ_MSG_SRCPORT(msgid), ++ VCHIQ_MSG_DSTPORT(msgid)); ++ ++ for (i = 0, pos = 0; i < (unsigned int)count; ++ pos += elements[i++].size) ++ if (elements[i].size) { ++ if (vchiq_copy_from_user ++ (header->data + pos, elements[i].data, ++ (size_t) elements[i].size) != ++ VCHIQ_SUCCESS) { ++ vcos_mutex_unlock(&state->slot_mutex); ++ VCHIQ_SERVICE_STATS_INC(service, error_count); ++ return VCHIQ_ERROR; ++ } ++ if (i == 0) { ++ vcos_log_dump_mem( &vchiq_core_msg_log_category, ++ "Sent", 0, header->data + pos, ++ vcos_min( 64, elements[0].size )); ++ } ++ } ++ ++ /* If this transmission can't fit in the last slot used by this service... */ ++ tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos - 1); ++ if (tx_end_index != service_quota->previous_tx_index) ++ { ++ service_quota->slot_use_count++; ++ vcos_log_trace("%d: qm:%d %s,%x - slot_use->%d", ++ state->id, service->localport, ++ msg_type_str(VCHIQ_MSG_TYPE(msgid)), size, ++ service_quota->slot_use_count); ++ } ++ ++ service_quota->previous_tx_index = tx_end_index; ++ service_quota->message_use_count++; ++ VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count); ++ VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size); ++ } else { ++ vcos_log_info("%d: qm %s@%x,%x (%d->%d)", state->id, ++ msg_type_str(VCHIQ_MSG_TYPE(msgid)), ++ (unsigned int)header, size, ++ VCHIQ_MSG_SRCPORT(msgid), ++ VCHIQ_MSG_DSTPORT(msgid)); ++ if (size != 0) ++ { ++ vcos_assert((count == 1) && (size == elements[0].size)); ++ memcpy(header->data, elements[0].data, elements[0].size); ++ } ++ VCHIQ_STATS_INC(state, ctrl_tx_count); ++ } ++ ++ header->msgid = msgid; ++ header->size = size; ++ ++ if (vcos_is_log_enabled( &vchiq_core_msg_log_category, VCOS_LOG_INFO)) ++ { ++ int svc_fourcc; ++ ++ svc_fourcc = service ++ ? service->base.fourcc ++ : VCHIQ_MAKE_FOURCC('?','?','?','?'); ++ ++ vcos_log_impl( &vchiq_core_msg_log_category, ++ VCOS_LOG_INFO, ++ "Sent Msg %s(%u) to %c%c%c%c s:%u d:%d len:%d", ++ msg_type_str(VCHIQ_MSG_TYPE(msgid)), ++ VCHIQ_MSG_TYPE(msgid), ++ VCHIQ_FOURCC_AS_4CHARS(svc_fourcc), ++ VCHIQ_MSG_SRCPORT(msgid), ++ VCHIQ_MSG_DSTPORT(msgid), ++ size ); ++ } ++ ++ /* Make the new tx_pos visible to the peer. */ ++ local->tx_pos = state->local_tx_pos; ++ vcos_wmb(&local->tx_pos); ++ ++ if (VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_PAUSE) ++ vcos_mutex_unlock(&state->slot_mutex); ++ ++ remote_event_signal(&state->remote->trigger); ++ ++ return VCHIQ_SUCCESS; ++} ++ ++static inline void ++claim_slot(VCHIQ_SLOT_INFO_T *slot) ++{ ++ slot->use_count++; ++} ++ ++static void ++release_slot(VCHIQ_STATE_T *state, VCHIQ_SLOT_INFO_T *slot_info) ++{ ++ int release_count; ++ vcos_mutex_lock(&state->recycle_mutex); ++ ++ release_count = slot_info->release_count; ++ slot_info->release_count = ++release_count; ++ ++ if (release_count == slot_info->use_count) ++ { ++ int slot_queue_recycle; ++ /* Add to the freed queue */ ++ ++ /* A read barrier is necessary here to prevent speculative fetches of ++ remote->slot_queue_recycle from overtaking the mutex. */ ++ vcos_rmb(); ++ ++ slot_queue_recycle = state->remote->slot_queue_recycle; ++ state->remote->slot_queue[slot_queue_recycle & VCHIQ_SLOT_QUEUE_MASK] = ++ SLOT_INDEX_FROM_INFO(state, slot_info); ++ state->remote->slot_queue_recycle = slot_queue_recycle + 1; ++ vcos_log_info("%d: release_slot %d - recycle->%x", ++ state->id, SLOT_INDEX_FROM_INFO(state, slot_info), ++ state->remote->slot_queue_recycle); ++ ++ /* A write barrier is necessary, but remote_event_signal contains one. */ ++ remote_event_signal(&state->remote->recycle); ++ } ++ ++ vcos_mutex_unlock(&state->recycle_mutex); ++} ++ ++/* Called by the slot handler - don't hold the bulk mutex */ ++static VCHIQ_STATUS_T ++notify_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ ++ vcos_log_trace("%d: nb:%d %cx - p=%x rn=%x r=%x", ++ service->state->id, service->localport, ++ (queue == &service->bulk_tx) ? 't' : 'r', ++ queue->process, queue->remote_notify, queue->remove); ++ ++ if (service->state->is_master) ++ { ++ while (queue->remote_notify != queue->process) ++ { ++ VCHIQ_BULK_T *bulk = &queue->bulks[BULK_INDEX(queue->remote_notify)]; ++ int msgtype = (bulk->dir == VCHIQ_BULK_TRANSMIT) ? ++ VCHIQ_MSG_BULK_RX_DONE : VCHIQ_MSG_BULK_TX_DONE; ++ int msgid = VCHIQ_MAKE_MSG(msgtype, service->localport, service->remoteport); ++ VCHIQ_ELEMENT_T element = { &bulk->actual, 4 }; ++ /* Only reply to non-dummy bulk requests */ ++ if (bulk->remote_data) ++ { ++ status = queue_message(service->state, NULL, msgid, &element, 1, 4, 0); ++ if (status != VCHIQ_SUCCESS) ++ break; ++ } ++ queue->remote_notify++; ++ } ++ } ++ else ++ { ++ queue->remote_notify = queue->process; ++ } ++ ++ if (status == VCHIQ_SUCCESS) ++ { ++ while (queue->remove != queue->remote_notify) ++ { ++ VCHIQ_BULK_T *bulk = &queue->bulks[BULK_INDEX(queue->remove)]; ++ ++ /* Only generate callbacks for non-dummy bulk requests */ ++ if (bulk->data) ++ { ++ if (bulk->actual != VCHIQ_BULK_ACTUAL_ABORTED) ++ { ++ if (bulk->dir == VCHIQ_BULK_TRANSMIT) ++ { ++ VCHIQ_SERVICE_STATS_INC(service, bulk_tx_count); ++ VCHIQ_SERVICE_STATS_ADD(service, bulk_tx_bytes, bulk->actual); ++ } ++ else ++ { ++ VCHIQ_SERVICE_STATS_INC(service, bulk_rx_count); ++ VCHIQ_SERVICE_STATS_ADD(service, bulk_rx_bytes, bulk->actual); ++ } ++ } ++ else ++ { ++ VCHIQ_SERVICE_STATS_INC(service, bulk_aborted_count); ++ } ++ if (bulk->mode == VCHIQ_BULK_MODE_BLOCKING) ++ { ++ BULK_WAITER_T *waiter = (BULK_WAITER_T *)bulk->userdata; ++ if (waiter) ++ { ++ waiter->actual = bulk->actual; ++ vcos_event_signal(&waiter->event); ++ } ++ } ++ else if (bulk->mode == VCHIQ_BULK_MODE_CALLBACK) ++ { ++ VCHIQ_REASON_T reason = (bulk->dir == VCHIQ_BULK_TRANSMIT) ? ++ ((bulk->actual == VCHIQ_BULK_ACTUAL_ABORTED) ? ++ VCHIQ_BULK_TRANSMIT_ABORTED : VCHIQ_BULK_TRANSMIT_DONE) : ++ ((bulk->actual == VCHIQ_BULK_ACTUAL_ABORTED) ? ++ VCHIQ_BULK_RECEIVE_ABORTED : VCHIQ_BULK_RECEIVE_DONE); ++ status = make_service_callback(service, reason, ++ NULL, bulk->userdata); ++ if (status == VCHIQ_RETRY) ++ break; ++ } ++ } ++ ++ queue->remove++; ++ vcos_event_signal(&service->bulk_remove_event); ++ } ++ } ++ ++ if (status != VCHIQ_SUCCESS) ++ request_poll(service->state, service, (queue == &service->bulk_tx) ? ++ VCHIQ_POLL_TXNOTIFY : VCHIQ_POLL_RXNOTIFY); ++ ++ return status; ++} ++ ++/* Called by the slot handler thread */ ++static void ++poll_services(VCHIQ_STATE_T *state) ++{ ++ int group, i; ++ ++ for (group = 0; group < BITSET_SIZE(state->unused_service); group++) ++ { ++ uint32_t flags; ++ flags = vcos_atomic_flags_get_and_clear(&state->poll_services[group]); ++ for (i = 0; flags; i++) ++ { ++ if (flags & (1 << i)) ++ { ++ VCHIQ_SERVICE_T *service = state->services[(group<<5) + i]; ++ uint32_t service_flags = ++ vcos_atomic_flags_get_and_clear(&service->poll_flags); ++ if (service_flags & (1 << VCHIQ_POLL_TERMINATE)) ++ { ++ vcos_log_info("%d: ps - terminate %d<->%d", state->id, service->localport, service->remoteport); ++ if (vchiq_close_service_internal(service, 0/*!close_recvd*/) != VCHIQ_SUCCESS) ++ request_poll(state, service, VCHIQ_POLL_TERMINATE); ++ } ++ if (service_flags & (1 << VCHIQ_POLL_TXNOTIFY)) ++ notify_bulks(service, &service->bulk_tx); ++ if (service_flags & (1 << VCHIQ_POLL_RXNOTIFY)) ++ notify_bulks(service, &service->bulk_rx); ++ flags &= ~(1 << i); ++ } ++ } ++ } ++} ++ ++/* Called by the slot handler or application threads, holding the bulk mutex. */ ++static int ++resolve_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue) ++{ ++ VCHIQ_STATE_T *state = service->state; ++ int resolved = 0; ++ ++ while ((queue->process != queue->local_insert) && ++ (queue->process != queue->remote_insert)) ++ { ++ VCHIQ_BULK_T *bulk = &queue->bulks[BULK_INDEX(queue->process)]; ++ ++ vcos_log_trace("%d: rb:%d %cx - li=%x ri=%x p=%x", ++ state->id, service->localport, ++ (queue == &service->bulk_tx) ? 't' : 'r', ++ queue->local_insert, queue->remote_insert, ++ queue->process); ++ ++ vcos_assert((int)(queue->local_insert - queue->process) > 0); ++ vcos_assert((int)(queue->remote_insert - queue->process) > 0); ++ vchiq_transfer_bulk(bulk); ++ ++ if (vcos_is_log_enabled( &vchiq_core_msg_log_category, VCOS_LOG_INFO)) ++ { ++ const char *header = (queue == &service->bulk_tx) ? ++ "Send Bulk to" : "Recv Bulk from"; ++ if (bulk->actual != VCHIQ_BULK_ACTUAL_ABORTED) ++ vcos_log_impl( &vchiq_core_msg_log_category, ++ VCOS_LOG_INFO, ++ "%s %c%c%c%c d:%d len:%d %x<->%x", ++ header, ++ VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc), ++ service->remoteport, ++ bulk->size, ++ (unsigned int)bulk->data, ++ (unsigned int)bulk->remote_data ); ++ else ++ vcos_log_impl( &vchiq_core_msg_log_category, ++ VCOS_LOG_INFO, ++ "%s %c%c%c%c d:%d ABORTED - tx len:%d, rx len:%d %x<->%x", ++ header, ++ VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc), ++ service->remoteport, ++ bulk->size, ++ bulk->remote_size, ++ (unsigned int)bulk->data, ++ (unsigned int)bulk->remote_data ); ++ } ++ ++ vchiq_complete_bulk(bulk); ++ queue->process++; ++ resolved++; ++ } ++ return resolved; ++} ++ ++/* Called with the bulk_mutex held */ ++static void ++abort_outstanding_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue) ++{ ++ int is_tx = (queue == &service->bulk_tx); ++ vcos_log_trace("%d: aob:%d %cx - li=%x ri=%x p=%x", ++ service->state->id, service->localport, is_tx ? 't' : 'r', ++ queue->local_insert, queue->remote_insert, queue->process); ++ ++ vcos_assert((int)(queue->local_insert - queue->process) >= 0); ++ vcos_assert((int)(queue->remote_insert - queue->process) >= 0); ++ ++ while ((queue->process != queue->local_insert) || ++ (queue->process != queue->remote_insert)) ++ { ++ VCHIQ_BULK_T *bulk = &queue->bulks[BULK_INDEX(queue->process)]; ++ ++ if (queue->process == queue->remote_insert) ++ { ++ /* fabricate a matching dummy bulk */ ++ bulk->remote_data = NULL; ++ bulk->remote_size = 0; ++ queue->remote_insert++; ++ } ++ ++ if (queue->process != queue->local_insert) ++ { ++ vchiq_complete_bulk(bulk); ++ ++ if (vcos_is_log_enabled( &vchiq_core_msg_log_category, VCOS_LOG_INFO)) ++ { ++ vcos_log_impl( &vchiq_core_msg_log_category, ++ VCOS_LOG_INFO, ++ "%s %c%c%c%c d:%d ABORTED - tx len:%d, rx len:%d", ++ is_tx ? "Send Bulk to" : "Recv Bulk from", ++ VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc), ++ service->remoteport, ++ bulk->size, ++ bulk->remote_size ); ++ } ++ } ++ else ++ { ++ /* fabricate a matching dummy bulk */ ++ bulk->data = NULL; ++ bulk->size = 0; ++ bulk->actual = VCHIQ_BULK_ACTUAL_ABORTED; ++ bulk->dir = is_tx ? VCHIQ_BULK_TRANSMIT : VCHIQ_BULK_RECEIVE; ++ queue->local_insert++; ++ } ++ ++ queue->process++; ++ } ++} ++ ++static void ++pause_bulks(VCHIQ_STATE_T *state) ++{ ++ int i; ++ ++ /* Block bulk transfers from all services */ ++ for (i = 0; i < state->unused_service; i++) ++ { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ if (!service || (service->srvstate != VCHIQ_SRVSTATE_OPEN)) ++ continue; ++ ++ vcos_log_trace("locking bulk_mutex for service %d", i); ++ vcos_mutex_lock(&service->bulk_mutex); ++ } ++} ++ ++static void ++resume_bulks(VCHIQ_STATE_T *state) ++{ ++ int i; ++ ++ /* Poll all services in case any bulk transfers have been ++ deferred */ ++ for (i = 0; i < state->unused_service; i++) ++ { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ if (!service || (service->srvstate != VCHIQ_SRVSTATE_OPEN)) ++ continue; ++ ++ if (resolve_bulks(service, &service->bulk_tx)) ++ request_poll(state, service, VCHIQ_POLL_TXNOTIFY); ++ if (resolve_bulks(service, &service->bulk_rx)) ++ request_poll(state, service, VCHIQ_POLL_RXNOTIFY); ++ vcos_log_trace("unlocking bulk_mutex for service %d", i); ++ vcos_mutex_unlock(&service->bulk_mutex); ++ } ++} ++ ++/* Called by the slot handler thread */ ++static void ++parse_rx_slots(VCHIQ_STATE_T *state) ++{ ++ VCHIQ_SHARED_STATE_T *remote = state->remote; ++ int tx_pos; ++ DEBUG_INITIALISE(state->local) ++ ++ tx_pos = remote->tx_pos; ++ ++ while (state->rx_pos != tx_pos) { ++ VCHIQ_SERVICE_T *service = NULL; ++ VCHIQ_HEADER_T *header; ++ int msgid, size; ++ int type; ++ unsigned int localport, remoteport; ++ ++ DEBUG_TRACE(PARSE_LINE); ++ if (!state->rx_data) ++ { ++ int rx_index; ++ vcos_assert((state->rx_pos & VCHIQ_SLOT_MASK) == 0); ++ rx_index = remote->slot_queue[SLOT_QUEUE_INDEX_FROM_POS(state->rx_pos) & VCHIQ_SLOT_QUEUE_MASK]; ++ state->rx_data = (char *)SLOT_DATA_FROM_INDEX(state, rx_index); ++ state->rx_info = SLOT_INFO_FROM_INDEX(state, rx_index); ++ ++ /* Initialise use_count to one, and increment release_count at the end ++ of the slot to avoid releasing the slot prematurely. */ ++ state->rx_info->use_count = 1; ++ state->rx_info->release_count = 0; ++ } ++ ++ header = (VCHIQ_HEADER_T *)(state->rx_data + (state->rx_pos & VCHIQ_SLOT_MASK)); ++ DEBUG_VALUE(PARSE_HEADER, (int)header); ++ msgid = header->msgid; ++ DEBUG_VALUE(PARSE_MSGID, msgid); ++ size = header->size; ++ type = VCHIQ_MSG_TYPE(msgid); ++ localport = VCHIQ_MSG_DSTPORT(msgid); ++ remoteport = VCHIQ_MSG_SRCPORT(msgid); ++ ++ if (type != VCHIQ_MSG_DATA) ++ { ++ VCHIQ_STATS_INC(state, ctrl_rx_count); ++ } ++ ++ switch (type) ++ { ++ case VCHIQ_MSG_OPENACK: ++ case VCHIQ_MSG_CLOSE: ++ case VCHIQ_MSG_DATA: ++ case VCHIQ_MSG_BULK_RX: ++ case VCHIQ_MSG_BULK_TX: ++ case VCHIQ_MSG_BULK_RX_DONE: ++ case VCHIQ_MSG_BULK_TX_DONE: ++ if (localport <= VCHIQ_PORT_MAX) ++ { ++ service = state->services[localport]; ++ if (service && (service->srvstate == VCHIQ_SRVSTATE_FREE)) ++ service = NULL; ++ } ++ if (!service) ++ { ++ vcos_log_error( ++ "%d: prs %s@%x (%d->%d) - invalid/closed service %d", ++ state->id, msg_type_str(type), (unsigned int)header, ++ remoteport, localport, localport); ++ goto skip_message; ++ } ++ default: ++ break; ++ } ++ ++ if ( vcos_is_log_enabled( &vchiq_core_msg_log_category, VCOS_LOG_INFO)) ++ { ++ int svc_fourcc; ++ ++ svc_fourcc = service ++ ? service->base.fourcc ++ : VCHIQ_MAKE_FOURCC('?','?','?','?'); ++ vcos_log_impl( &vchiq_core_msg_log_category, ++ VCOS_LOG_INFO, ++ "Rcvd Msg %s(%u) from %c%c%c%c s:%d d:%d len:%d", ++ msg_type_str(type), type, ++ VCHIQ_FOURCC_AS_4CHARS(svc_fourcc), ++ remoteport, localport, size ); ++ if (size > 0) { ++ vcos_log_dump_mem( &vchiq_core_msg_log_category, ++ "Rcvd", 0, header->data, ++ vcos_min( 64, size )); ++ } ++ } ++ ++ if (((unsigned int)header & VCHIQ_SLOT_MASK) + calc_stride(size) > VCHIQ_SLOT_SIZE) ++ { ++ vcos_log_error("header %x (msgid %x) - size %x too big for slot", ++ (unsigned int)header, (unsigned int)msgid, (unsigned int)size); ++ vcos_assert(0); ++ } ++ ++ switch (type) { ++ case VCHIQ_MSG_OPEN: ++ vcos_assert(VCHIQ_MSG_DSTPORT(msgid) == 0); ++ if (vcos_verify(size == sizeof(VCHIQ_OPEN_PAYLOAD_T))) { ++ const VCHIQ_OPEN_PAYLOAD_T *payload = (VCHIQ_OPEN_PAYLOAD_T *)header->data; ++ unsigned int fourcc; ++ ++ fourcc = payload->fourcc; ++ vcos_log_info("%d: prs OPEN@%x (%d->'%c%c%c%c')", ++ state->id, (unsigned int)header, ++ localport, ++ VCHIQ_FOURCC_AS_4CHARS(fourcc)); ++ ++ service = get_listening_service(state, fourcc); ++ ++ if (service) ++ { ++ /* A matching service exists */ ++ short version = payload->version; ++ short version_min = payload->version_min; ++ if ((service->version < version_min) || ++ (version < service->version_min)) ++ { ++ /* Version mismatch */ ++ vcos_log_error("%d: service %d (%c%c%c%c) version mismatch -" ++ " local (%d, min %d) vs. remote (%d, min %d)", ++ state->id, service->localport, ++ VCHIQ_FOURCC_AS_4CHARS(fourcc), ++ service->version, service->version_min, ++ version, version_min); ++ goto fail_open; ++ } ++ if (service->srvstate == VCHIQ_SRVSTATE_LISTENING) ++ { ++ /* Acknowledge the OPEN */ ++ if (queue_message(state, NULL, ++ VCHIQ_MAKE_MSG(VCHIQ_MSG_OPENACK, service->localport, remoteport), ++ NULL, 0, 0, 0) == VCHIQ_RETRY) ++ return; /* Bail out if not ready */ ++ ++ /* The service is now open */ ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_OPEN); ++ } ++ ++ service->remoteport = remoteport; ++ service->client_id = ((int *)header->data)[1]; ++ if (make_service_callback(service, VCHIQ_SERVICE_OPENED, ++ NULL, NULL) == VCHIQ_RETRY) ++ { ++ /* Bail out if not ready */ ++ service->remoteport = VCHIQ_PORT_FREE; ++ return; ++ } ++ ++ /* Break out, and skip the failure handling */ ++ break; ++ } ++ } ++ fail_open: ++ /* No available service, or an invalid request - send a CLOSE */ ++ if (queue_message(state, NULL, ++ VCHIQ_MAKE_MSG(VCHIQ_MSG_CLOSE, 0, VCHIQ_MSG_SRCPORT(msgid)), ++ NULL, 0, 0, 0) == VCHIQ_RETRY) ++ return; /* Bail out if not ready */ ++ break; ++ case VCHIQ_MSG_OPENACK: ++ { ++ vcos_log_info("%d: prs OPENACK@%x (%d->%d)", ++ state->id, (unsigned int)header, ++ remoteport, localport); ++ if (service->srvstate == VCHIQ_SRVSTATE_OPENING) { ++ service->remoteport = remoteport; ++ vchiq_set_service_state(service, ++ VCHIQ_SRVSTATE_OPEN); ++ vcos_event_signal(&service->remove_event); ++ } ++ } ++ break; ++ case VCHIQ_MSG_CLOSE: ++ { ++ vcos_assert(size == 0); /* There should be no data */ ++ ++ vcos_log_info("%d: prs CLOSE@%x (%d->%d)", ++ state->id, (unsigned int)header, ++ remoteport, localport); ++ ++ if ((service->remoteport != remoteport) && ++ VCHIQ_PORT_IS_VALID(service->remoteport)) { ++ /* This could be from a client which hadn't yet received ++ the OPENACK - look for the connected service */ ++ service = get_connected_service(state, remoteport); ++ if (!service) ++ break; ++ } ++ ++ if (vchiq_close_service_internal(service, ++ 1/*close_recvd*/) == VCHIQ_RETRY) ++ return; /* Bail out if not ready */ ++ ++ if (vcos_is_log_enabled( &vchiq_core_msg_log_category, VCOS_LOG_INFO)) ++ { ++ vcos_log_impl( &vchiq_core_msg_log_category, ++ VCOS_LOG_INFO, ++ "Close Service %c%c%c%c s:%u d:%d", ++ VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc), ++ service->localport, ++ service->remoteport ); ++ } ++ } ++ break; ++ case VCHIQ_MSG_DATA: ++ { ++ vcos_log_trace("%d: prs DATA@%x,%x (%d->%d)", ++ state->id, (unsigned int)header, size, ++ remoteport, localport); ++ ++ if ((service->remoteport == remoteport) ++ && (service->srvstate == ++ VCHIQ_SRVSTATE_OPEN)) { ++ header->msgid = msgid | VCHIQ_MSGID_CLAIMED; ++ claim_slot(state->rx_info); ++ DEBUG_TRACE(PARSE_LINE); ++ if (make_service_callback(service, ++ VCHIQ_MESSAGE_AVAILABLE, header, ++ NULL) == VCHIQ_RETRY) ++ { ++ DEBUG_TRACE(PARSE_LINE); ++ return; /* Bail out if not ready */ ++ } ++ VCHIQ_SERVICE_STATS_INC(service, ctrl_rx_count); ++ VCHIQ_SERVICE_STATS_ADD(service, ctrl_rx_bytes, size); ++ } ++ else ++ { ++ VCHIQ_STATS_INC(state, error_count); ++ } ++ } ++ break; ++ case VCHIQ_MSG_CONNECT: ++ vcos_log_info("%d: prs CONNECT@%x", ++ state->id, (unsigned int)header); ++ vcos_event_signal(&state->connect); ++ break; ++ case VCHIQ_MSG_BULK_RX: ++ case VCHIQ_MSG_BULK_TX: ++ { ++ VCHIQ_BULK_QUEUE_T *queue; ++ vcos_assert(state->is_master); ++ queue = (type == VCHIQ_MSG_BULK_RX) ? ++ &service->bulk_tx : &service->bulk_rx; ++ if ((service->remoteport == remoteport) ++ && (service->srvstate == ++ VCHIQ_SRVSTATE_OPEN)) ++ { ++ VCHIQ_BULK_T *bulk; ++ int resolved; ++ ++ vcos_assert(queue->remote_insert < queue->remove + ++ VCHIQ_NUM_SERVICE_BULKS); ++ bulk = &queue->bulks[BULK_INDEX(queue->remote_insert)]; ++ bulk->remote_data = (void *)((int *)header->data)[0]; ++ bulk->remote_size = ((int *)header->data)[1]; ++ ++ vcos_log_info("%d: prs %s@%x (%d->%d) %x@%x", ++ state->id, msg_type_str(type), ++ (unsigned int)header, ++ remoteport, localport, ++ bulk->remote_size, ++ (unsigned int)bulk->remote_data); ++ ++ queue->remote_insert++; ++ ++ if (state->conn_state != VCHIQ_CONNSTATE_CONNECTED) ++ break; ++ ++ DEBUG_TRACE(PARSE_LINE); ++ if (vcos_mutex_lock(&service->bulk_mutex) != VCOS_SUCCESS) ++ { ++ DEBUG_TRACE(PARSE_LINE); ++ return; ++ } ++ DEBUG_TRACE(PARSE_LINE); ++ resolved = resolve_bulks(service, queue); ++ vcos_mutex_unlock(&service->bulk_mutex); ++ if (resolved) ++ notify_bulks(service, queue); ++ } ++ } ++ break; ++ case VCHIQ_MSG_BULK_RX_DONE: ++ case VCHIQ_MSG_BULK_TX_DONE: ++ { ++ vcos_assert(!state->is_master); ++ if ((service->remoteport == remoteport) ++ && (service->srvstate != ++ VCHIQ_SRVSTATE_FREE)) { ++ VCHIQ_BULK_QUEUE_T *queue; ++ VCHIQ_BULK_T *bulk; ++ ++ queue = (type == VCHIQ_MSG_BULK_RX_DONE) ? ++ &service->bulk_rx : &service->bulk_tx; ++ ++ bulk = &queue->bulks[BULK_INDEX(queue->process)]; ++ bulk->actual = *(int *)header->data; ++ ++ vcos_log_info("%d: prs %s@%x (%d->%d) %x@%x", ++ state->id, msg_type_str(type), ++ (unsigned int)header, ++ remoteport, localport, ++ bulk->actual, (unsigned int)bulk->data); ++ ++ vcos_log_trace("%d: prs:%d %cx li=%x ri=%x p=%x", ++ state->id, localport, ++ (type == VCHIQ_MSG_BULK_RX_DONE) ? 'r' : 't', ++ queue->local_insert, ++ queue->remote_insert, queue->process); ++ ++ DEBUG_TRACE(PARSE_LINE); ++ if (vcos_mutex_lock(&service->bulk_mutex) != VCOS_SUCCESS) ++ { ++ DEBUG_TRACE(PARSE_LINE); ++ return; ++ } ++ DEBUG_TRACE(PARSE_LINE); ++ vcos_assert(queue->process != queue->local_insert); ++ vchiq_complete_bulk(bulk); ++ queue->process++; ++ vcos_mutex_unlock(&service->bulk_mutex); ++ DEBUG_TRACE(PARSE_LINE); ++ notify_bulks(service, queue); ++ DEBUG_TRACE(PARSE_LINE); ++ } ++ } ++ break; ++ case VCHIQ_MSG_PADDING: ++ vcos_log_trace("%d: prs PADDING@%x,%x", ++ state->id, (unsigned int)header, size); ++ break; ++ case VCHIQ_MSG_PAUSE: ++ /* If initiated, signal the application thread */ ++ vcos_log_trace("%d: prs PAUSE@%x,%x", ++ state->id, (unsigned int)header, size); ++ if (state->conn_state != VCHIQ_CONNSTATE_PAUSE_SENT) ++ { ++ /* Send a PAUSE in response */ ++ if (queue_message(state, NULL, ++ VCHIQ_MAKE_MSG(VCHIQ_MSG_PAUSE, 0, 0), ++ NULL, 0, 0, 0) == VCHIQ_RETRY) ++ return; /* Bail out if not ready */ ++ if (state->is_master) ++ pause_bulks(state); ++ } ++ /* At this point slot_mutex is held */ ++ vchiq_set_conn_state(state, VCHIQ_CONNSTATE_PAUSED); ++ vchiq_platform_paused(state); ++ break; ++ case VCHIQ_MSG_RESUME: ++ vcos_log_trace("%d: prs RESUME@%x,%x", ++ state->id, (unsigned int)header, size); ++ /* Release the slot mutex */ ++ vcos_mutex_unlock(&state->slot_mutex); ++ if (state->is_master) ++ resume_bulks(state); ++ vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED); ++ vchiq_platform_resumed(state); ++ break; ++ ++ case VCHIQ_MSG_REMOTE_USE: ++ vchiq_on_remote_use(state); ++ break; ++ case VCHIQ_MSG_REMOTE_RELEASE: ++ vchiq_on_remote_release(state); ++ break; ++ case VCHIQ_MSG_REMOTE_USE_ACTIVE: ++ vchiq_on_remote_use_active(state); ++ break; ++ ++ default: ++ vcos_log_error("%d: prs invalid msgid %x@%x,%x", ++ state->id, msgid, (unsigned int)header, size); ++ vcos_assert(0); ++ break; ++ } ++ ++ skip_message: ++ state->rx_pos += calc_stride(size); ++ ++ DEBUG_TRACE(PARSE_LINE); ++ /* Perform some housekeeping when the end of the slot is reached. */ ++ if ((state->rx_pos & VCHIQ_SLOT_MASK) == 0) ++ { ++ /* Remove the extra reference count. */ ++ release_slot(state, state->rx_info); ++ state->rx_data = NULL; ++ } ++ } ++} ++ ++/* Called by the slot handler thread */ ++static void * ++slot_handler_func(void *v) ++{ ++ VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v; ++ VCHIQ_SHARED_STATE_T *local = state->local; ++ DEBUG_INITIALISE(local) ++ ++ while (1) { ++ DEBUG_COUNT(SLOT_HANDLER_COUNT); ++ DEBUG_TRACE(SLOT_HANDLER_LINE); ++ remote_event_wait(&local->trigger); ++ ++ vcos_rmb(); ++ ++ DEBUG_TRACE(SLOT_HANDLER_LINE); ++ if (state->poll_needed) ++ { ++ state->poll_needed = 0; ++ ++ /* Handle service polling and other rare conditions here out ++ of the mainline code */ ++ switch (state->conn_state) ++ { ++ case VCHIQ_CONNSTATE_CONNECTED: ++ /* Poll the services as requested */ ++ poll_services(state); ++ break; ++ ++ case VCHIQ_CONNSTATE_PAUSING: ++ if (queue_message(state, NULL, ++ VCHIQ_MAKE_MSG(VCHIQ_MSG_PAUSE, 0, 0), NULL, 0, 0, 0) ++ != VCHIQ_RETRY) ++ { ++ if (state->is_master) ++ pause_bulks(state); ++ vchiq_set_conn_state(state, VCHIQ_CONNSTATE_PAUSE_SENT); ++ } ++ else ++ { ++ state->poll_needed = 1; /* Retry later */ ++ } ++ break; ++ ++ case VCHIQ_CONNSTATE_RESUMING: ++ if (queue_message(state, NULL, ++ VCHIQ_MAKE_MSG(VCHIQ_MSG_RESUME, 0, 0), NULL, 0, 0, 0) ++ != VCHIQ_RETRY) ++ { ++ if (state->is_master) ++ resume_bulks(state); ++ vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED); ++ vchiq_platform_resumed(state); ++ } ++ else ++ { ++ /* This should really be impossible, since the PAUSE should ++ have flushed through outstanding messages. */ ++ vcos_log_error("Failed to send RESUME message"); ++ vcos_demand(0); ++ } ++ break; ++ default: ++ break; ++ } ++ } ++ ++ DEBUG_TRACE(SLOT_HANDLER_LINE); ++ parse_rx_slots(state); ++ } ++ return NULL; ++} ++ ++ ++/* Called by the recycle thread */ ++static void * ++recycle_func(void *v) ++{ ++ VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v; ++ VCHIQ_SHARED_STATE_T *local = state->local; ++ ++ while (1) { ++ remote_event_wait(&local->recycle); ++ ++ vcos_mutex_lock(&state->slot_mutex); ++ ++ process_free_queue(state); ++ ++ vcos_mutex_unlock(&state->slot_mutex); ++ } ++ return NULL; ++} ++ ++ ++static void ++init_bulk_queue(VCHIQ_BULK_QUEUE_T *queue) ++{ ++ queue->local_insert = 0; ++ queue->remote_insert = 0; ++ queue->process = 0; ++ queue->remote_notify = 0; ++ queue->remove = 0; ++} ++ ++VCHIQ_SLOT_ZERO_T * ++vchiq_init_slots(void *mem_base, int mem_size) ++{ ++ int mem_align = (VCHIQ_SLOT_SIZE - (int)mem_base) & VCHIQ_SLOT_MASK; ++ VCHIQ_SLOT_ZERO_T *slot_zero = (VCHIQ_SLOT_ZERO_T *)((char *)mem_base + mem_align); ++ int num_slots = (mem_size - mem_align)/VCHIQ_SLOT_SIZE; ++ int first_data_slot = VCHIQ_SLOT_ZERO_SLOTS; ++ ++ /* Ensure there is enough memory to run an absolutely minimum system */ ++ num_slots -= first_data_slot; ++ ++ if (num_slots < 4) ++ { ++ vcos_log_error("vchiq_init_slots - insufficient memory %x bytes", mem_size); ++ return NULL; ++ } ++ ++ memset(slot_zero, 0, sizeof(VCHIQ_SLOT_ZERO_T)); ++ ++ slot_zero->magic = VCHIQ_MAGIC; ++ slot_zero->version = VCHIQ_VERSION; ++ slot_zero->version_min = VCHIQ_VERSION_MIN; ++ slot_zero->slot_zero_size = sizeof(VCHIQ_SLOT_ZERO_T); ++ slot_zero->slot_size = VCHIQ_SLOT_SIZE; ++ slot_zero->max_slots = VCHIQ_MAX_SLOTS; ++ slot_zero->max_slots_per_side = VCHIQ_MAX_SLOTS_PER_SIDE; ++ ++ slot_zero->master.slot_first = first_data_slot; ++ slot_zero->slave.slot_first = first_data_slot + (num_slots/2); ++ slot_zero->master.slot_last = slot_zero->slave.slot_first - 1; ++ slot_zero->slave.slot_last = first_data_slot + num_slots - 1; ++ ++ return slot_zero; ++} ++ ++VCHIQ_STATUS_T ++vchiq_init_state(VCHIQ_STATE_T *state, VCHIQ_SLOT_ZERO_T *slot_zero, int is_master) ++{ ++ VCHIQ_SHARED_STATE_T *local; ++ VCHIQ_SHARED_STATE_T *remote; ++ VCOS_THREAD_ATTR_T attrs; ++ VCHIQ_STATUS_T status; ++ char threadname[10]; ++ static int id = 0; ++ int i; ++ ++ vcos_log_set_level(&vchiq_core_log_category, vchiq_default_core_log_level); ++ vcos_log_set_level(&vchiq_core_msg_log_category, vchiq_default_core_msg_log_level); ++ vcos_log_register("vchiq_core", &vchiq_core_log_category); ++ vcos_log_register("vchiq_core_msg", &vchiq_core_msg_log_category); ++ ++ vcos_log_warn( "%s: slot_zero = 0x%08lx, is_master = %d", __func__, (unsigned long)slot_zero, is_master ); ++ ++ /* Check the input configuration */ ++ ++ if (slot_zero->magic != VCHIQ_MAGIC) ++ { ++ vcos_log_error("slot_zero=%x: magic=%x (expected %x)", ++ (unsigned int)slot_zero, slot_zero->magic, VCHIQ_MAGIC); ++ return VCHIQ_ERROR; ++ } ++ ++ if (slot_zero->version < VCHIQ_VERSION_MIN) ++ { ++ vcos_log_error("slot_zero=%x: peer_version=%x (minimum %x)", ++ (unsigned int)slot_zero, slot_zero->version, VCHIQ_VERSION_MIN); ++ return VCHIQ_ERROR; ++ } ++ ++ if (VCHIQ_VERSION < slot_zero->version_min) ++ { ++ vcos_log_error("slot_zero=%x: version=%x (peer minimum %x)", ++ (unsigned int)slot_zero, VCHIQ_VERSION, slot_zero->version_min); ++ return VCHIQ_ERROR; ++ } ++ ++ if (slot_zero->slot_zero_size != sizeof(VCHIQ_SLOT_ZERO_T)) ++ { ++ vcos_log_error("slot_zero=%x: slot_zero_size=%x (expected %x)", ++ (unsigned int)slot_zero, slot_zero->slot_zero_size, sizeof(VCHIQ_SLOT_ZERO_T)); ++ return VCHIQ_ERROR; ++ } ++ ++ if (slot_zero->slot_size != VCHIQ_SLOT_SIZE) ++ { ++ vcos_log_error("slot_zero=%x: slot_size=%d (expected %d", ++ (unsigned int)slot_zero, slot_zero->slot_size, VCHIQ_SLOT_SIZE); ++ return VCHIQ_ERROR; ++ } ++ ++ if (slot_zero->max_slots != VCHIQ_MAX_SLOTS) ++ { ++ vcos_log_error("slot_zero=%x: max_slots=%d (expected %d)", ++ (unsigned int)slot_zero, slot_zero->max_slots, VCHIQ_MAX_SLOTS); ++ return VCHIQ_ERROR; ++ } ++ ++ if (slot_zero->max_slots_per_side != VCHIQ_MAX_SLOTS_PER_SIDE) ++ { ++ vcos_log_error("slot_zero=%x: max_slots_per_side=%d (expected %d)", ++ (unsigned int)slot_zero, slot_zero->max_slots_per_side, ++ VCHIQ_MAX_SLOTS_PER_SIDE); ++ return VCHIQ_ERROR; ++ } ++ ++ if (is_master) ++ { ++ local = &slot_zero->master; ++ remote = &slot_zero->slave; ++ } ++ else ++ { ++ local = &slot_zero->slave; ++ remote = &slot_zero->master; ++ } ++ ++ if (local->initialised) ++ { ++ if (remote->initialised) ++ vcos_log_error("vchiq: FATAL: local state has already been initialised"); ++ else ++ vcos_log_error("vchiq: FATAL: master/slave mismatch - two %ss", is_master ? "master" : "slave"); ++ return VCHIQ_ERROR; ++ } ++ ++ memset(state, 0, sizeof(VCHIQ_STATE_T)); ++ vcos_log_warn( "%s: called", __func__); ++ state->id = id++; ++ state->is_master = is_master; ++ ++ /* ++ initialize shared state pointers ++ */ ++ ++ state->local = local; ++ state->remote = remote; ++ state->slot_data = (VCHIQ_SLOT_T *)slot_zero; ++ ++ /* ++ initialize events and mutexes ++ */ ++ ++ vcos_event_create(&state->connect, "v.connect"); ++ vcos_mutex_create(&state->mutex, "v.mutex"); ++ vcos_event_create(&state->trigger_event, "v.trigger_event"); ++ vcos_event_create(&state->recycle_event, "v.recycle_event"); ++ ++ vcos_mutex_create(&state->slot_mutex, "v.slot_mutex"); ++ vcos_mutex_create(&state->recycle_mutex, "v.recycle_mutex"); ++ ++ vcos_event_create(&state->slot_available_event, "v.slot_available_event"); ++ vcos_event_create(&state->slot_remove_event, "v.slot_remove_event"); ++ ++ state->slot_queue_available = 0; ++ ++ for (i = 0; i < VCHIQ_MAX_SERVICES; i++) ++ { ++ VCHIQ_SERVICE_QUOTA_T *service_quota = &state->service_quotas[i]; ++ vcos_event_create(&service_quota->quota_event, "v.quota_event"); ++ } ++ ++ for (i = local->slot_first; i <= local->slot_last; i++) ++ { ++ local->slot_queue[state->slot_queue_available++] = i; ++ } ++ ++ state->default_slot_quota = state->slot_queue_available/2; ++ state->default_message_quota = vcos_min(state->default_slot_quota * 256, (unsigned short)~0); ++ ++ local->trigger.event = &state->trigger_event; ++ remote_event_create(&local->trigger); ++ local->tx_pos = 0; ++ ++ local->recycle.event = &state->recycle_event; ++ remote_event_create(&local->recycle); ++ local->slot_queue_recycle = state->slot_queue_available; ++ ++ local->debug[DEBUG_ENTRIES] = DEBUG_MAX; ++ ++ /* ++ bring up slot handler thread ++ */ ++ ++ vcos_thread_attr_init(&attrs); ++ vcos_thread_attr_setstacksize(&attrs, VCHIQ_SLOT_HANDLER_STACK); ++ vcos_thread_attr_setpriority(&attrs, VCOS_THREAD_PRI_REALTIME); ++ vcos_snprintf(threadname, sizeof(threadname), "VCHIQ-%d", state->id); ++ if (vcos_thread_create(&state->slot_handler_thread, threadname, ++ &attrs, slot_handler_func, state) != VCOS_SUCCESS) ++ { ++ vcos_log_error("vchiq: FATAL: couldn't create thread %s", threadname); ++ return VCHIQ_ERROR; ++ } ++ ++ vcos_thread_attr_init(&attrs); ++ vcos_thread_attr_setstacksize(&attrs, VCHIQ_SLOT_HANDLER_STACK); ++ vcos_thread_attr_setpriority(&attrs, VCOS_THREAD_PRI_REALTIME); ++ vcos_snprintf(threadname, sizeof(threadname), "VCHIQr-%d", state->id); ++ if (vcos_thread_create(&state->recycle_thread, threadname, ++ &attrs, recycle_func, state) != VCOS_SUCCESS) ++ { ++ vcos_log_error("vchiq: FATAL: couldn't create thread %s", threadname); ++ return VCHIQ_ERROR; ++ } ++ ++ status = vchiq_platform_init_state(state); ++ ++ /* Indicate readiness to the other side */ ++ local->initialised = 1; ++ ++ return status; ++} ++ ++/* Called from application thread when a client or server service is created. */ ++VCHIQ_SERVICE_T * ++vchiq_add_service_internal(VCHIQ_STATE_T *state, ++ const VCHIQ_SERVICE_PARAMS_T *params, int srvstate, ++ VCHIQ_INSTANCE_T instance) ++{ ++ VCHIQ_SERVICE_T **pservice = NULL; ++ VCHIQ_SERVICE_T *service = NULL; ++ int i; ++ ++ /* Prepare to use a previously unused service */ ++ if (state->unused_service < VCHIQ_MAX_SERVICES) ++ { ++ pservice = &state->services[state->unused_service]; ++ } ++ ++ if (srvstate == VCHIQ_SRVSTATE_OPENING) { ++ for (i = 0; i < state->unused_service; i++) { ++ VCHIQ_SERVICE_T *srv = state->services[i]; ++ if (!srv) ++ { ++ pservice = &state->services[i]; ++ break; ++ } ++ if (srv->srvstate == VCHIQ_SRVSTATE_FREE) { ++ service = srv; ++ break; ++ } ++ } ++ } else { ++ for (i = (state->unused_service - 1); i >= 0; i--) { ++ VCHIQ_SERVICE_T *srv = state->services[i]; ++ if (!srv) ++ pservice = &state->services[i]; ++ else if (srv->srvstate == VCHIQ_SRVSTATE_FREE) { ++ service = srv; ++ } else if ((srv->public_fourcc == params->fourcc) && ++ ((srv->instance != instance) ++ || (srv->base.callback != params->callback))) { ++ /* There is another server using this fourcc which doesn't match */ ++ pservice = NULL; ++ service = NULL; ++ } ++ } ++ } ++ ++ if (pservice && !service) ++ { ++ service = vcos_malloc(sizeof(VCHIQ_SERVICE_T), "VCHIQ service"); ++ if (service) ++ { ++ service->srvstate = VCHIQ_SRVSTATE_FREE; ++ service->localport = (pservice - state->services); ++ vcos_event_create(&service->remove_event, "v.remove_event"); ++ vcos_event_create(&service->bulk_remove_event, "v.bulk_remove_event"); ++ vcos_mutex_create(&service->bulk_mutex, "v.bulk_mutex"); ++ *pservice = service; ++ } ++ else ++ { ++ vcos_log_error("vchiq: Out of memory"); ++ } ++ } ++ ++ if (service) { ++ VCHIQ_SERVICE_QUOTA_T *service_quota = ++ &state->service_quotas[service->localport]; ++ if (vcos_is_log_enabled( &vchiq_core_msg_log_category, VCOS_LOG_INFO)) { ++ vcos_log_impl( &vchiq_core_msg_log_category, ++ VCOS_LOG_INFO, ++ "%s Service %c%c%c%c SrcPort:%d", ++ ( srvstate == VCHIQ_SRVSTATE_OPENING ) ++ ? "Open" : "Add", ++ VCHIQ_FOURCC_AS_4CHARS(params->fourcc), ++ service->localport ); ++ } ++ service->state = state; ++ service->base.fourcc = params->fourcc; ++ service->base.callback = params->callback; ++ service->base.userdata = params->userdata; ++ service->version = params->version; ++ service->version_min = params->version_min; ++ vchiq_set_service_state(service, srvstate); ++ service->public_fourcc = ++ (srvstate == ++ VCHIQ_SRVSTATE_OPENING) ? VCHIQ_FOURCC_INVALID : params->fourcc; ++ service->instance = instance; ++ service->remoteport = VCHIQ_PORT_FREE; ++ service->client_id = 0; ++ service->auto_close = 1; ++ service->service_use_count = 0; ++ init_bulk_queue(&service->bulk_tx); ++ init_bulk_queue(&service->bulk_rx); ++ service_quota->slot_quota = state->default_slot_quota; ++ service_quota->message_quota = state->default_message_quota; ++ if (service_quota->slot_use_count == 0) ++ service_quota->previous_tx_index = ++ SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos) - 1; ++ memset(&service->stats, 0, sizeof(service->stats)); ++ vcos_atomic_flags_create(&service->poll_flags); ++ ++ /* Ensure the events are unsignalled */ ++ while (vcos_event_try(&service->remove_event) == VCOS_SUCCESS) ++ continue; ++ while (vcos_event_try(&service_quota->quota_event) == VCOS_SUCCESS) ++ continue; ++ ++ if (pservice == &state->services[state->unused_service]) ++ state->unused_service++; ++ } ++ ++ return service; ++} ++ ++VCHIQ_STATUS_T ++vchiq_open_service_internal(VCHIQ_SERVICE_T *service, int client_id) ++{ ++ VCHIQ_OPEN_PAYLOAD_T payload = { ++ service->base.fourcc, ++ client_id, ++ service->version, ++ service->version_min ++ }; ++ VCHIQ_ELEMENT_T body = { &payload, sizeof(payload) }; ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ ++ service->client_id = client_id; ++ vchiq_use_service(&service->base); ++ status = queue_message(service->state, NULL, ++ VCHIQ_MAKE_MSG(VCHIQ_MSG_OPEN, service->localport, 0), ++ &body, 1, sizeof(payload), 1); ++ if (status == VCHIQ_SUCCESS) { ++ if (vcos_event_wait(&service->remove_event) != VCOS_SUCCESS) { ++ status = VCHIQ_RETRY; ++ vchiq_release_service(&service->base); ++ } else if (service->srvstate != VCHIQ_SRVSTATE_OPEN) { ++ vcos_log_info("%d: osi - srvstate = %d", service->state->id, service->srvstate); ++ vcos_assert(service->srvstate == VCHIQ_SRVSTATE_CLOSEWAIT); ++ status = VCHIQ_ERROR; ++ VCHIQ_SERVICE_STATS_INC(service, error_count); ++ vchiq_release_service(&service->base); ++ } ++ } ++ return status; ++} ++ ++/* Called by the slot handler */ ++VCHIQ_STATUS_T ++vchiq_close_service_internal(VCHIQ_SERVICE_T *service, int close_recvd) ++{ ++ VCHIQ_STATE_T *state = service->state; ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ ++ vcos_log_trace("%d: csi:%d (%s)", ++ service->state->id, service->localport, ++ srvstate_names[service->srvstate]); ++ ++ switch (service->srvstate) ++ { ++ case VCHIQ_SRVSTATE_OPENING: ++ if (close_recvd) ++ { ++ /* The open was rejected - tell the user */ ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_CLOSEWAIT); ++ vcos_event_signal(&service->remove_event); ++ } ++ else ++ { ++ /* Shutdown mid-open - let the other side know */ ++ status = queue_message(state, NULL, ++ VCHIQ_MAKE_MSG ++ (VCHIQ_MSG_CLOSE, ++ service->localport, ++ VCHIQ_MSG_DSTPORT(service->remoteport)), ++ NULL, 0, 0, 0); ++ ++ if (status == VCHIQ_SUCCESS) ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_CLOSESENT); ++ } ++ break; ++ ++ case VCHIQ_SRVSTATE_OPEN: ++ if (state->is_master) ++ { ++ /* Abort any outstanding bulk transfers */ ++ vcos_mutex_lock(&service->bulk_mutex); ++ abort_outstanding_bulks(service, &service->bulk_tx); ++ abort_outstanding_bulks(service, &service->bulk_rx); ++ status = notify_bulks(service, &service->bulk_tx); ++ if (status == VCHIQ_SUCCESS) ++ status = notify_bulks(service, &service->bulk_rx); ++ vcos_mutex_unlock(&service->bulk_mutex); ++ } ++ ++ if (status == VCHIQ_SUCCESS) ++ status = queue_message(state, NULL, ++ VCHIQ_MAKE_MSG ++ (VCHIQ_MSG_CLOSE, ++ service->localport, ++ VCHIQ_MSG_DSTPORT(service->remoteport)), ++ NULL, 0, 0, 0); ++ ++ if (status == VCHIQ_SUCCESS) ++ { ++ if (close_recvd) ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_CLOSING); ++ else ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_CLOSESENT); ++ } ++ break; ++ ++ case VCHIQ_SRVSTATE_CLOSESENT: ++ vcos_assert(close_recvd); ++ ++ if (!state->is_master) ++ { ++ /* Abort any outstanding bulk transfers */ ++ vcos_mutex_lock(&service->bulk_mutex); ++ abort_outstanding_bulks(service, &service->bulk_tx); ++ abort_outstanding_bulks(service, &service->bulk_rx); ++ status = notify_bulks(service, &service->bulk_tx); ++ if (status == VCHIQ_SUCCESS) ++ status = notify_bulks(service, &service->bulk_rx); ++ vcos_mutex_unlock(&service->bulk_mutex); ++ } ++ ++ if (status == VCHIQ_SUCCESS) ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_CLOSING); ++ break; ++ ++ case VCHIQ_SRVSTATE_CLOSING: ++ /* We may come here after a retry */ ++ vcos_assert(!close_recvd); ++ break; ++ ++ default: ++ vcos_log_error("vchiq_close_service_internal(%d) called in state %s", ++ close_recvd, srvstate_names[service->srvstate]); ++ vcos_assert(0); ++ break; ++ } ++ ++ if (service->srvstate == VCHIQ_SRVSTATE_CLOSING) ++ { ++ int i; ++ int uc = service->service_use_count; ++ /* Complete the close process */ ++ for( i=0; iclient_id = 0; ++ ++ /* Now tell the client that the services is closed */ ++ if (service->instance) ++ { ++ int oldstate = service->srvstate; ++ ++ /* Change the service state now for the benefit of the callback */ ++ vchiq_set_service_state(service, ++ ((service->public_fourcc == VCHIQ_FOURCC_INVALID) || ++ !service->auto_close) ? ++ VCHIQ_SRVSTATE_CLOSEWAIT : ++ VCHIQ_SRVSTATE_LISTENING); ++ ++ status = make_service_callback(service, VCHIQ_SERVICE_CLOSED, NULL, NULL); ++ ++ if (status == VCHIQ_RETRY) ++ { ++ /* Restore the old state, to be retried later */ ++ vchiq_set_service_state(service, oldstate); ++ } ++ else ++ { ++ if (status == VCHIQ_ERROR) { ++ /* Signal an error (fatal, since the other end will probably have closed) */ ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_OPEN); ++ } ++ } ++ } ++ ++ if (status != VCHIQ_RETRY) ++ { ++ if (service->srvstate == VCHIQ_SRVSTATE_CLOSING) ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_CLOSEWAIT); ++ vcos_event_signal(&service->remove_event); ++ } ++ } ++ ++ return status; ++} ++ ++/* Called from the application process upon process death */ ++void ++vchiq_terminate_service_internal(VCHIQ_SERVICE_T *service) ++{ ++ VCHIQ_STATE_T *state = service->state; ++ ++ vcos_log_info("%d: tsi - (%d<->%d)", state->id, service->localport, service->remoteport); ++ ++ /* Disconnect from the instance, to prevent any callbacks */ ++ service->instance = NULL; ++ ++ /* Mark the service for termination by the slot handler */ ++ request_poll(state, service, VCHIQ_POLL_TERMINATE); ++} ++ ++/* Called from the application process upon process death, and from ++ vchiq_remove_service */ ++void ++vchiq_free_service_internal(VCHIQ_SERVICE_T *service) ++{ ++ VCHIQ_STATE_T *state = service->state; ++ int slot_last = state->remote->slot_last; ++ int i; ++ ++ vcos_log_info("%d: fsi - (%d)", state->id, service->localport); ++ ++ vcos_mutex_lock(&state->mutex); ++ ++ /* Release any claimed messages */ ++ for (i = state->remote->slot_first; i <= slot_last; i++) ++ { ++ VCHIQ_SLOT_INFO_T *slot_info = SLOT_INFO_FROM_INDEX(state, i); ++ if (slot_info->release_count != slot_info->use_count) ++ { ++ char *data = (char *)SLOT_DATA_FROM_INDEX(state, i); ++ unsigned int pos, end; ++ ++ end = VCHIQ_SLOT_SIZE; ++ if (data == state->rx_data) ++ { ++ /* This buffer is still being read from - stop at the current read position */ ++ end = state->rx_pos & VCHIQ_SLOT_MASK; ++ } ++ ++ pos = 0; ++ ++ while (pos < end) ++ { ++ VCHIQ_HEADER_T *header = (VCHIQ_HEADER_T *)(data + pos); ++ int msgid = header->msgid; ++ int port = VCHIQ_MSG_DSTPORT(msgid); ++ if (port == service->localport) ++ { ++ if (msgid & VCHIQ_MSGID_CLAIMED) ++ { ++ header->msgid = msgid & ~VCHIQ_MSGID_CLAIMED; ++ vcos_log_info(" fsi - hdr %x", (unsigned int)header); ++ release_slot(state, slot_info); ++ } ++ } ++ pos += calc_stride(header->size); ++ if (pos > VCHIQ_SLOT_SIZE) ++ { ++ vcos_log_error("fsi - pos %x: header %x, msgid %x, header->msgid %x, header->size %x", ++ pos, (unsigned int)header, msgid, header->msgid, header->size); ++ vcos_assert(0); ++ } ++ } ++ } ++ } ++ ++ vcos_assert(state->services[service->localport] == service); ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_FREE); ++ state->services[service->localport] = NULL; ++ vcos_free(service); ++ vcos_mutex_unlock(&state->mutex); ++} ++ ++VCHIQ_STATUS_T ++vchiq_connect_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance) ++{ ++ int i; ++ ++ /* Find all services registered to this client and enable them. */ ++ for (i = 0; i < state->unused_service; i++) ++ { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ if (service && (service->instance == instance)) { ++ if (service->srvstate == VCHIQ_SRVSTATE_HIDDEN) ++ vchiq_set_service_state(service, ++ VCHIQ_SRVSTATE_LISTENING); ++ } ++ } ++ ++ if (state->conn_state == VCHIQ_CONNSTATE_DISCONNECTED) { ++ if (queue_message(state, NULL, ++ VCHIQ_MAKE_MSG(VCHIQ_MSG_CONNECT, 0, 0), NULL, 0, ++ 0, 1) == VCHIQ_RETRY) ++ return VCHIQ_RETRY; ++ vcos_event_wait(&state->connect); ++ ++ vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED); ++ } ++ ++ return VCHIQ_SUCCESS; ++} ++ ++VCHIQ_STATUS_T ++vchiq_shutdown_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ int i; ++ ++ /* Find all services registered to this client and close them. */ ++ for (i = 0; i < state->unused_service; i++) ++ { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ if (service && (service->instance == instance) && ++ ((service->srvstate == VCHIQ_SRVSTATE_OPEN) || ++ (service->srvstate == VCHIQ_SRVSTATE_LISTENING))) ++ { ++ status = vchiq_remove_service(&service->base); ++ if (status != VCHIQ_SUCCESS) ++ break; ++ } ++ } ++ ++ return status; ++} ++ ++VCHIQ_STATUS_T ++vchiq_pause_internal(VCHIQ_STATE_T *state) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ ++ switch (state->conn_state) ++ { ++ case VCHIQ_CONNSTATE_CONNECTED: ++ /* Request a pause */ ++ vchiq_set_conn_state(state, VCHIQ_CONNSTATE_PAUSING); ++ request_poll(state, NULL, 0); ++ break; ++ case VCHIQ_CONNSTATE_PAUSED: ++ break; ++ default: ++ status = VCHIQ_ERROR; ++ VCHIQ_STATS_INC(state, error_count); ++ break; ++ } ++ ++ return status; ++} ++ ++VCHIQ_STATUS_T ++vchiq_resume_internal(VCHIQ_STATE_T *state) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ ++ if (state->conn_state == VCHIQ_CONNSTATE_PAUSED) ++ { ++ vchiq_set_conn_state(state, VCHIQ_CONNSTATE_RESUMING); ++ request_poll(state, NULL, 0); ++ } ++ else ++ { ++ status = VCHIQ_ERROR; ++ VCHIQ_STATS_INC(state, error_count); ++ } ++ ++ return status; ++} ++ ++VCHIQ_STATUS_T ++vchiq_close_service(VCHIQ_SERVICE_HANDLE_T handle) ++{ ++ /* Unregister the service */ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *) handle; ++ VCHIQ_STATUS_T status = VCHIQ_ERROR; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ vcos_log_info("%d: close_service:%d", service->state->id, service->localport); ++ ++ if (service->public_fourcc != VCHIQ_FOURCC_INVALID) ++ { ++ if (service->srvstate == VCHIQ_SRVSTATE_CLOSEWAIT) ++ { ++ /* This is a non-auto-close server */ ++ vchiq_set_service_state(service, VCHIQ_SRVSTATE_LISTENING); ++ status = VCHIQ_SUCCESS; ++ } ++ } ++ else ++ { ++ /* For clients, make it an alias of vchiq_remove_service */ ++ status = vchiq_remove_service(handle); ++ } ++ ++ return status; ++} ++ ++VCHIQ_STATUS_T ++vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T handle) ++{ ++ /* Unregister the service */ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *) handle; ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ vcos_log_info("%d: remove_service:%d", service->state->id, service->localport); ++ ++ switch (service->srvstate) ++ { ++ case VCHIQ_SRVSTATE_OPENING: ++ case VCHIQ_SRVSTATE_OPEN: ++ /* Mark the service for termination by the slot handler */ ++ request_poll(service->state, service, VCHIQ_POLL_TERMINATE); ++ ++ /* Drop through... */ ++ case VCHIQ_SRVSTATE_CLOSESENT: ++ case VCHIQ_SRVSTATE_CLOSING: ++ while ((service->srvstate != VCHIQ_SRVSTATE_CLOSEWAIT) && ++ (service->srvstate != VCHIQ_SRVSTATE_LISTENING)) ++ { ++ if (vcos_event_wait(&service->remove_event) != VCOS_SUCCESS) { ++ status = VCHIQ_RETRY; ++ break; ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ if (status == VCHIQ_SUCCESS) { ++ if (service->srvstate == VCHIQ_SRVSTATE_OPEN) ++ status = VCHIQ_ERROR; ++ else ++ { ++ service->instance = NULL; ++ vchiq_free_service_internal(service); ++ } ++ } ++ ++ return status; ++} ++ ++ ++VCHIQ_STATUS_T ++vchiq_bulk_transfer(VCHIQ_SERVICE_T *service, ++ VCHI_MEM_HANDLE_T memhandle, void *offset, int size, void *userdata, ++ VCHIQ_BULK_MODE_T mode, VCHIQ_BULK_DIR_T dir) ++{ ++ VCHIQ_BULK_QUEUE_T *queue = (dir == VCHIQ_BULK_TRANSMIT) ? ++ &service->bulk_tx : &service->bulk_rx; ++ VCHIQ_BULK_T *bulk; ++ VCHIQ_STATE_T *state; ++ BULK_WAITER_T bulk_waiter; ++ const char dir_char = (dir == VCHIQ_BULK_TRANSMIT) ? 't' : 'r'; ++ const int dir_msgtype = (dir == VCHIQ_BULK_TRANSMIT) ? VCHIQ_MSG_BULK_TX : VCHIQ_MSG_BULK_RX; ++ VCHIQ_STATUS_T status = VCHIQ_ERROR; ++ ++ if (!is_valid_service(service) || ++ (service->srvstate != VCHIQ_SRVSTATE_OPEN) || ++ ((memhandle == VCHI_MEM_HANDLE_INVALID) && (offset == NULL)) || ++ (vchiq_check_service(service) != VCHIQ_SUCCESS)) ++ return VCHIQ_ERROR; ++ ++ state = service->state; ++ ++ if (vcos_mutex_lock(&service->bulk_mutex) != VCOS_SUCCESS) ++ return VCHIQ_RETRY; ++ ++ if (queue->local_insert == queue->remove + VCHIQ_NUM_SERVICE_BULKS) ++ { ++ VCHIQ_SERVICE_STATS_INC(service, bulk_stalls); ++ do { ++ vcos_mutex_unlock(&service->bulk_mutex); ++ if (vcos_event_wait(&service->bulk_remove_event) != VCOS_SUCCESS) ++ return VCHIQ_RETRY; ++ if (vcos_mutex_lock(&service->bulk_mutex) != VCOS_SUCCESS) ++ return VCHIQ_RETRY; ++ } while (queue->local_insert == queue->remove + VCHIQ_NUM_SERVICE_BULKS); ++ } ++ ++ bulk = &queue->bulks[BULK_INDEX(queue->local_insert)]; ++ ++ if (mode == VCHIQ_BULK_MODE_BLOCKING) ++ { ++ vcos_event_create(&bulk_waiter.event, "bulk_waiter"); ++ bulk_waiter.actual = 0; ++ userdata = &bulk_waiter; ++ } ++ ++ bulk->mode = mode; ++ bulk->dir = dir; ++ bulk->userdata = userdata; ++ bulk->size = size; ++ bulk->actual = VCHIQ_BULK_ACTUAL_ABORTED; ++ ++ if (vchiq_prepare_bulk_data(bulk, memhandle, offset, size, dir) != VCHIQ_SUCCESS) ++ { ++ goto error_exit; ++ } ++ ++ vcos_log_info("%d: bt (%d->%d) %cx %x@%x %x", state->id, ++ service->localport, service->remoteport, dir_char, ++ size, (unsigned int)bulk->data, (unsigned int)userdata); ++ ++ if (state->is_master) ++ { ++ queue->local_insert++; ++ if (resolve_bulks(service, queue)) ++ request_poll(state, service, (dir == VCHIQ_BULK_TRANSMIT) ? ++ VCHIQ_POLL_TXNOTIFY : VCHIQ_POLL_RXNOTIFY); ++ } ++ else ++ { ++ int payload[2] = { (int)bulk->data, bulk->size }; ++ VCHIQ_ELEMENT_T element = { payload, sizeof(payload) }; ++ ++ if (queue_message(state, NULL, ++ VCHIQ_MAKE_MSG(dir_msgtype, ++ service->localport, service->remoteport), ++ &element, 1, sizeof(payload), 1) != VCHIQ_SUCCESS) ++ { ++ vchiq_complete_bulk(bulk); ++ goto error_exit; ++ } ++ queue->local_insert++; ++ queue->remote_insert++; ++ } ++ ++ vcos_mutex_unlock(&service->bulk_mutex); ++ ++ vcos_log_trace("%d: bt:%d %cx li=%x ri=%x p=%x", state->id, ++ service->localport, dir_char, ++ queue->local_insert, queue->remote_insert, queue->process); ++ ++ status = VCHIQ_SUCCESS; ++ ++ if (mode == VCHIQ_BULK_MODE_BLOCKING) ++ { ++ if (vcos_event_wait(&bulk_waiter.event) != VCOS_SUCCESS) ++ { ++ vcos_log_info("bulk wait interrupted"); ++ /* Stop notify_bulks signalling a non-existent waiter */ ++ bulk->userdata = NULL; ++ status = VCHIQ_ERROR; ++ } ++ else if (bulk_waiter.actual == VCHIQ_BULK_ACTUAL_ABORTED) ++ status = VCHIQ_ERROR; ++ ++ vcos_event_delete(&bulk_waiter.event); ++ } ++ ++ return status; ++ ++error_exit: ++ if (mode == VCHIQ_BULK_MODE_BLOCKING) ++ vcos_event_delete(&bulk_waiter.event); ++ vcos_mutex_unlock(&service->bulk_mutex); ++ ++ return status; ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle, ++ const void *data, int size, void *userdata) ++{ ++ return vchiq_bulk_transfer((VCHIQ_SERVICE_T *)handle, ++ VCHI_MEM_HANDLE_INVALID, (void *)data, size, userdata, ++ VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_TRANSMIT); ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, void *data, int size, ++ void *userdata) ++{ ++ return vchiq_bulk_transfer((VCHIQ_SERVICE_T *)handle, ++ VCHI_MEM_HANDLE_INVALID, data, size, userdata, ++ VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_RECEIVE); ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_bulk_transmit_handle(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T memhandle, const void *offset, int size, void *userdata) ++{ ++ return vchiq_bulk_transfer((VCHIQ_SERVICE_T *)handle, ++ memhandle, (void *)offset, size, userdata, ++ VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_TRANSMIT); ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_bulk_receive_handle(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T memhandle, void *offset, int size, void *userdata) ++{ ++ return vchiq_bulk_transfer((VCHIQ_SERVICE_T *)handle, ++ memhandle, offset, size, userdata, ++ VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_RECEIVE); ++} ++ ++VCHIQ_STATUS_T ++vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle, const void *data, int size, ++ void *userdata, VCHIQ_BULK_MODE_T mode) ++{ ++ return vchiq_bulk_transfer((VCHIQ_SERVICE_T *)handle, ++ VCHI_MEM_HANDLE_INVALID, (void *)data, size, userdata, ++ mode, VCHIQ_BULK_TRANSMIT); ++} ++ ++VCHIQ_STATUS_T ++vchiq_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, void *data, int size, ++ void *userdata, VCHIQ_BULK_MODE_T mode) ++{ ++ return vchiq_bulk_transfer((VCHIQ_SERVICE_T *)handle, ++ VCHI_MEM_HANDLE_INVALID, data, size, userdata, ++ mode, VCHIQ_BULK_RECEIVE); ++} ++ ++VCHIQ_STATUS_T ++vchiq_bulk_transmit_handle(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T memhandle, const void *offset, int size, void *userdata, ++ VCHIQ_BULK_MODE_T mode) ++{ ++ return vchiq_bulk_transfer((VCHIQ_SERVICE_T *)handle, ++ memhandle, (void *)offset, size, userdata, ++ mode, VCHIQ_BULK_TRANSMIT); ++} ++ ++VCHIQ_STATUS_T ++vchiq_bulk_receive_handle(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T memhandle, void *offset, int size, void *userdata, ++ VCHIQ_BULK_MODE_T mode) ++{ ++ return vchiq_bulk_transfer((VCHIQ_SERVICE_T *)handle, ++ memhandle, offset, size, userdata, ++ mode, VCHIQ_BULK_RECEIVE); ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_message(VCHIQ_SERVICE_HANDLE_T handle, ++ const VCHIQ_ELEMENT_T *elements, int count) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *) handle; ++ ++ unsigned int size = 0; ++ unsigned int i; ++ ++ if (!is_valid_service(service) || ++ (service->srvstate != VCHIQ_SRVSTATE_OPEN) || ++ (vchiq_check_service(service) != VCHIQ_SUCCESS)) ++ return VCHIQ_ERROR; ++ ++ for (i = 0; i < (unsigned int)count; i++) ++ { ++ if (elements[i].size) ++ { ++ if (elements[i].data == NULL) ++ { ++ VCHIQ_SERVICE_STATS_INC(service, error_count); ++ return VCHIQ_ERROR; ++ } ++ size += elements[i].size; ++ } ++ } ++ ++ if (size > VCHIQ_MAX_MSG_SIZE) ++ { ++ VCHIQ_SERVICE_STATS_INC(service, error_count); ++ return VCHIQ_ERROR; ++ } ++ ++ return queue_message(service->state, service, ++ VCHIQ_MAKE_MSG(VCHIQ_MSG_DATA, service->localport, ++ service->remoteport), elements, count, size, 1); ++} ++ ++void ++vchiq_release_message(VCHIQ_SERVICE_HANDLE_T handle, VCHIQ_HEADER_T *header) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ VCHIQ_STATE_T *state; ++ int slot_index; ++ int msgid; ++ ++ if (!is_valid_service(service)) ++ return; ++ ++ state = service->state; ++ ++ slot_index = SLOT_INDEX_FROM_DATA(state, (void *)header); ++ ++ if ((slot_index >= state->remote->slot_first) && ++ (slot_index <= state->remote->slot_last) && ++ ((msgid = header->msgid) & VCHIQ_MSGID_CLAIMED)) ++ { ++ VCHIQ_SLOT_INFO_T *slot_info = SLOT_INFO_FROM_INDEX(state, slot_index); ++ ++ /* Rewrite the message header to prevent a double release */ ++ header->msgid = msgid & ~VCHIQ_MSGID_CLAIMED; ++ ++ release_slot(state, slot_info); ++ } ++} ++ ++int ++vchiq_get_client_id(VCHIQ_SERVICE_HANDLE_T handle) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ return service ? service->client_id : 0; ++} ++ ++VCHIQ_STATUS_T ++vchiq_get_config(VCHIQ_INSTANCE_T instance, ++ int config_size, VCHIQ_CONFIG_T *pconfig) ++{ ++ VCHIQ_CONFIG_T config; ++ ++ vcos_unused(instance); ++ ++ config.max_msg_size = VCHIQ_MAX_MSG_SIZE; ++ config.bulk_threshold = VCHIQ_MAX_MSG_SIZE; ++ config.max_outstanding_bulks = VCHIQ_NUM_SERVICE_BULKS; ++ config.max_services = VCHIQ_MAX_SERVICES; ++ config.version = VCHIQ_VERSION; ++ config.version_min = VCHIQ_VERSION_MIN; ++ ++ if (config_size > sizeof(VCHIQ_CONFIG_T)) ++ return VCHIQ_ERROR; ++ ++ memcpy(pconfig, &config, vcos_min(config_size, sizeof(VCHIQ_CONFIG_T))); ++ ++ return VCHIQ_SUCCESS; ++} ++ ++VCHIQ_STATUS_T ++vchiq_set_service_option(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHIQ_SERVICE_OPTION_T option, int value) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ VCHIQ_STATUS_T status = VCHIQ_ERROR; ++ ++ if (is_valid_service(service)) ++ { ++ switch (option) ++ { ++ case VCHIQ_SERVICE_OPTION_AUTOCLOSE: ++ service->auto_close = value; ++ status = VCHIQ_SUCCESS; ++ break; ++ ++ case VCHIQ_SERVICE_OPTION_SLOT_QUOTA: ++ { ++ VCHIQ_SERVICE_QUOTA_T *service_quota = ++ &service->state->service_quotas[service->localport]; ++ if (value == 0) ++ value = service->state->default_slot_quota; ++ if ((value >= service_quota->slot_use_count) && ++ (value < (unsigned short)~0)) ++ { ++ service_quota->slot_quota = value; ++ if ((value >= service_quota->slot_use_count) && ++ (service_quota->message_quota >= service_quota->message_use_count)) ++ { ++ /* Signal the service that it may have dropped below its quota */ ++ vcos_event_signal(&service_quota->quota_event); ++ } ++ status = VCHIQ_SUCCESS; ++ } ++ } ++ break; ++ ++ case VCHIQ_SERVICE_OPTION_MESSAGE_QUOTA: ++ { ++ VCHIQ_SERVICE_QUOTA_T *service_quota = ++ &service->state->service_quotas[service->localport]; ++ if (value == 0) ++ value = service->state->default_message_quota; ++ if ((value >= service_quota->message_use_count) && ++ (value < (unsigned short)~0)) ++ { ++ service_quota->message_quota = value; ++ if ((value >= service_quota->message_use_count) && ++ (service_quota->slot_quota >= service_quota->slot_use_count)) ++ { ++ /* Signal the service that it may have dropped below its quota */ ++ vcos_event_signal(&service_quota->quota_event); ++ } ++ status = VCHIQ_SUCCESS; ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ } ++ ++ return status; ++} ++ ++void ++vchiq_dump_shared_state(void *dump_context, VCHIQ_STATE_T *state, ++ VCHIQ_SHARED_STATE_T *shared, const char *label) ++{ ++ static const char *const debug_names[] = ++ { ++ "", ++ "SLOT_HANDLER_COUNT", ++ "SLOT_HANDLER_LINE", ++ "PARSE_LINE", ++ "PARSE_HEADER", ++ "PARSE_MSGID", ++ "AWAIT_COMPLETION_LINE", ++ "DEQUEUE_MESSAGE_LINE", ++ "SERVICE_CALLBACK_LINE", ++ "MSG_QUEUE_FULL_COUNT", ++ "COMPLETION_QUEUE_FULL_COUNT" ++ }; ++ int i; ++ ++ char buf[80]; ++ int len; ++ len = vcos_snprintf(buf, sizeof(buf), ++ " %s: slots %d-%d tx_pos=%x recycle=%x", ++ label, shared->slot_first, shared->slot_last, ++ shared->tx_pos, shared->slot_queue_recycle); ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ len = vcos_snprintf(buf, sizeof(buf), ++ " Slots claimed:"); ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ for (i = shared->slot_first; i <= shared->slot_last; i++) ++ { ++ VCHIQ_SLOT_INFO_T slot_info = *SLOT_INFO_FROM_INDEX(state, i); ++ if (slot_info.use_count != slot_info.release_count) ++ { ++ len = vcos_snprintf(buf, sizeof(buf), ++ " %d: %d/%d", i, slot_info.use_count, slot_info.release_count); ++ vchiq_dump(dump_context, buf, len + 1); ++ } ++ } ++ ++ for (i = 1; i < shared->debug[DEBUG_ENTRIES]; i++) ++ { ++ len = vcos_snprintf(buf, sizeof(buf), " DEBUG: %s = %d(%x)", ++ debug_names[i], shared->debug[i], shared->debug[i]); ++ vchiq_dump(dump_context, buf, len + 1); ++ } ++} ++ ++void ++vchiq_dump_state(void *dump_context, VCHIQ_STATE_T *state) ++{ ++ char buf[80]; ++ int len; ++ int i; ++ ++ len = vcos_snprintf(buf, sizeof(buf), "State %d: %s", state->id, ++ conn_state_names[state->conn_state]); ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ len = vcos_snprintf(buf, sizeof(buf), ++ " tx_pos=%x(@%x), rx_pos=%x(@%x)", ++ state->id, state->local->tx_pos, ++ (uint32_t)state->tx_data + (state->local_tx_pos & VCHIQ_SLOT_MASK), ++ state->rx_pos, ++ (uint32_t)state->rx_data + (state->rx_pos & VCHIQ_SLOT_MASK)); ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ len = vcos_snprintf(buf, sizeof(buf), ++ " Version: %d (min %d)", ++ VCHIQ_VERSION, VCHIQ_VERSION_MIN); ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ if (VCHIQ_ENABLE_STATS) ++ { ++ len = vcos_snprintf(buf, sizeof(buf), ++ " Stats: ctrl_tx_count=%d, ctrl_rx_count=%d, error_count=%d", ++ state->stats.ctrl_tx_count, state->stats.ctrl_rx_count, ++ state->stats.slot_stalls); ++ vchiq_dump(dump_context, buf, len + 1); ++ } ++ ++ len = vcos_snprintf(buf, sizeof(buf), ++ " Slots: %d available, %d recyclable, %d stalls", ++ state->slot_queue_available - SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos), ++ state->local->slot_queue_recycle - state->slot_queue_available, ++ state->stats.slot_stalls); ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ vchiq_dump_platform_state(dump_context); ++ ++ vchiq_dump_shared_state(dump_context, state, state->local, "Local"); ++ vchiq_dump_shared_state(dump_context, state, state->remote, "Remote"); ++ ++ vchiq_dump_platform_instances(dump_context); ++ ++ for (i = 0; i < state->unused_service; i++) { ++ VCHIQ_SERVICE_T *service = state->services[i]; ++ ++ if (service && (service->srvstate != VCHIQ_SRVSTATE_FREE)) ++ vchiq_dump_service_state(dump_context, service); ++ } ++} ++ ++void ++vchiq_dump_service_state(void *dump_context, VCHIQ_SERVICE_T *service) ++{ ++ char buf[80]; ++ int len; ++ ++ len = vcos_snprintf(buf, sizeof(buf), "Service %d: %s", ++ service->localport, srvstate_names[service->srvstate]); ++ ++ if (service->srvstate != VCHIQ_SRVSTATE_FREE) ++ { ++ char remoteport[30]; ++ VCHIQ_SERVICE_QUOTA_T *service_quota = ++ &service->state->service_quotas[service->localport]; ++ int fourcc = service->base.fourcc; ++ if (service->remoteport != VCHIQ_PORT_FREE) ++ { ++ int len2 = vcos_snprintf(remoteport, sizeof(remoteport), "%d", ++ service->remoteport); ++ if (service->public_fourcc != VCHIQ_FOURCC_INVALID) ++ vcos_snprintf(remoteport + len2, sizeof(remoteport) - len2, ++ " (client %x)", service->client_id); ++ } ++ else ++ vcos_strcpy(remoteport, "n/a"); ++ ++ len += vcos_snprintf(buf + len, sizeof(buf) - len, ++ " '%c%c%c%c' remote %s (msg use %d/%d, slot use %d/%d)", ++ VCHIQ_FOURCC_AS_4CHARS(fourcc), ++ remoteport, ++ service_quota->message_use_count, ++ service_quota->message_quota, ++ service_quota->slot_use_count, ++ service_quota->slot_quota); ++ ++ if (VCHIQ_ENABLE_STATS) ++ { ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ len = vcos_snprintf(buf, sizeof(buf), ++ " Ctrl: tx_count=%d, tx_bytes=%" PRIu64 ", rx_count=%d, rx_bytes=%" PRIu64, ++ service->stats.ctrl_tx_count, service->stats.ctrl_tx_bytes, ++ service->stats.ctrl_rx_count, service->stats.ctrl_rx_bytes); ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ len = vcos_snprintf(buf, sizeof(buf), ++ " Bulk: tx_count=%d, tx_bytes=%" PRIu64 ", rx_count=%d, rx_bytes=%" PRIu64, ++ service->stats.bulk_tx_count, service->stats.bulk_tx_bytes, ++ service->stats.bulk_rx_count, service->stats.bulk_rx_bytes); ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ len = vcos_snprintf(buf, sizeof(buf), ++ " %d quota stalls, %d slot stalls, %d bulk stalls, %d aborted, %d errors", ++ service->stats.quota_stalls, service->stats.slot_stalls, ++ service->stats.bulk_stalls, service->stats.bulk_aborted_count, ++ service->stats.error_count); ++ } ++ } ++ ++ vchiq_dump(dump_context, buf, len + 1); ++ ++ vchiq_dump_platform_service_state(dump_context, service); ++} ++ ++ ++VCHIQ_STATUS_T vchiq_send_remote_use(VCHIQ_STATE_T * state) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_RETRY; ++ if(state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED) ++ { ++ status = queue_message(state, NULL, VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_USE, 0, 0), NULL, 0, 0, 0); ++ } ++ return status; ++} ++ ++VCHIQ_STATUS_T vchiq_send_remote_release(VCHIQ_STATE_T * state) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_RETRY; ++ if(state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED) ++ { ++ status = queue_message(state, NULL, VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_RELEASE, 0, 0), NULL, 0, 0, 0); ++ } ++ return status; ++} ++ ++VCHIQ_STATUS_T vchiq_send_remote_use_active(VCHIQ_STATE_T * state) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_RETRY; ++ if(state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED) ++ { ++ status = queue_message(state, NULL, VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_USE_ACTIVE, 0, 0), NULL, 0, 0, 0); ++ } ++ return status; ++} +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,506 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_CORE_H ++#define VCHIQ_CORE_H ++ ++#include "vchiq_cfg.h" ++ ++#include "vchiq.h" ++ ++#define IS_POW2(x) (x && ((x & (x - 1)) == 0)) ++ ++/* Ensure that the slot size and maximum number of slots are powers of 2 */ ++vcos_static_assert(IS_POW2(VCHIQ_SLOT_SIZE)); ++vcos_static_assert(IS_POW2(VCHIQ_MAX_SLOTS)); ++vcos_static_assert(IS_POW2(VCHIQ_MAX_SLOTS_PER_SIDE)); ++ ++#define VCHIQ_SLOT_MASK (VCHIQ_SLOT_SIZE - 1) ++#define VCHIQ_SLOT_QUEUE_MASK (VCHIQ_MAX_SLOTS_PER_SIDE - 1) ++#define VCHIQ_SLOT_ZERO_SLOTS ((sizeof(VCHIQ_SLOT_ZERO_T) + \ ++ VCHIQ_SLOT_SIZE - 1) / VCHIQ_SLOT_SIZE) ++ ++#define VCHIQ_MSG_PADDING 0 // - ++#define VCHIQ_MSG_CONNECT 1 // - ++#define VCHIQ_MSG_OPEN 2 // + (srcport, -), fourcc, client_id ++#define VCHIQ_MSG_OPENACK 3 // + (srcport, dstport) ++#define VCHIQ_MSG_CLOSE 4 // + (srcport, dstport) ++#define VCHIQ_MSG_DATA 5 // + (srcport, dstport) ++#define VCHIQ_MSG_BULK_RX 6 // + (srcport, dstport), data, size ++#define VCHIQ_MSG_BULK_TX 7 // + (srcport, dstport), data, size ++#define VCHIQ_MSG_BULK_RX_DONE 8 // + (srcport, dstport), actual ++#define VCHIQ_MSG_BULK_TX_DONE 9 // + (srcport, dstport), actual ++#define VCHIQ_MSG_PAUSE 10 // - ++#define VCHIQ_MSG_RESUME 11 // - ++#define VCHIQ_MSG_REMOTE_USE 12 // - ++#define VCHIQ_MSG_REMOTE_RELEASE 13 // - ++#define VCHIQ_MSG_REMOTE_USE_ACTIVE 14 // - ++ ++#define VCHIQ_PORT_MAX (VCHIQ_MAX_SERVICES - 1) ++#define VCHIQ_PORT_FREE 0x1000 ++#define VCHIQ_PORT_IS_VALID(port) (port < VCHIQ_PORT_FREE) ++#define VCHIQ_MAKE_MSG(type,srcport,dstport) ((type<<24) | (srcport<<12) | (dstport<<0)) ++#define VCHIQ_MSG_TYPE(msgid) ((unsigned int)msgid >> 24) ++#define VCHIQ_MSG_SRCPORT(msgid) (unsigned short)(((unsigned int)msgid >> 12) & 0xfff) ++#define VCHIQ_MSG_DSTPORT(msgid) ((unsigned short)msgid & 0xfff) ++ ++#define VCHIQ_FOURCC_AS_4CHARS(fourcc) \ ++ ((fourcc) >> 24) & 0xff, \ ++ ((fourcc) >> 16) & 0xff, \ ++ ((fourcc) >> 8) & 0xff, \ ++ ((fourcc) ) & 0xff ++ ++/* Ensure the fields are wide enough */ ++vcos_static_assert(VCHIQ_MSG_SRCPORT(VCHIQ_MAKE_MSG(0,0,VCHIQ_PORT_MAX)) == 0); ++vcos_static_assert(VCHIQ_MSG_TYPE(VCHIQ_MAKE_MSG(0,VCHIQ_PORT_MAX,0)) == 0); ++vcos_static_assert((unsigned int)VCHIQ_PORT_MAX < (unsigned int)VCHIQ_PORT_FREE); ++ ++#define VCHIQ_MSGID_PADDING VCHIQ_MAKE_MSG(VCHIQ_MSG_PADDING,0,0) ++#define VCHIQ_MSGID_CLAIMED 0x40000000 ++ ++#define VCHIQ_FOURCC_INVALID 0x00000000 ++#define VCHIQ_FOURCC_IS_LEGAL(fourcc) (fourcc != VCHIQ_FOURCC_INVALID) ++ ++#define VCHIQ_BULK_ACTUAL_ABORTED -1 ++ ++typedef uint32_t BITSET_T; ++ ++vcos_static_assert((sizeof(BITSET_T) * 8) == 32); ++ ++#define BITSET_SIZE(b) ((b + 31) >> 5) ++#define BITSET_WORD(b) (b >> 5) ++#define BITSET_BIT(b) (1 << (b & 31)) ++#define BITSET_ZERO(bs) memset(bs, 0, sizeof(bs)) ++#define BITSET_IS_SET(bs, b) (bs[BITSET_WORD(b)] & BITSET_BIT(b)) ++#define BITSET_SET(bs, b) (bs[BITSET_WORD(b)] |= BITSET_BIT(b)) ++#define BITSET_CLR(bs, b) (bs[BITSET_WORD(b)] &= ~BITSET_BIT(b)) ++ ++#if VCHIQ_ENABLE_STATS ++#define VCHIQ_STATS_INC(state, stat) (state->stats. stat ++) ++#define VCHIQ_SERVICE_STATS_INC(service, stat) (service->stats. stat ++) ++#define VCHIQ_SERVICE_STATS_ADD(service, stat, addend) (service->stats. stat += addend) ++#else ++#define VCHIQ_STATS_INC(state, stat) ((void)0) ++#define VCHIQ_SERVICE_STATS_INC(service, stat) ((void)0) ++#define VCHIQ_SERVICE_STATS_ADD(service, stat, addend) ((void)0) ++#endif ++ ++enum ++{ ++ DEBUG_ENTRIES, ++#if VCHIQ_ENABLE_DEBUG ++ DEBUG_SLOT_HANDLER_COUNT, ++ DEBUG_SLOT_HANDLER_LINE, ++ DEBUG_PARSE_LINE, ++ DEBUG_PARSE_HEADER, ++ DEBUG_PARSE_MSGID, ++ DEBUG_AWAIT_COMPLETION_LINE, ++ DEBUG_DEQUEUE_MESSAGE_LINE, ++ DEBUG_SERVICE_CALLBACK_LINE, ++ DEBUG_MSG_QUEUE_FULL_COUNT, ++ DEBUG_COMPLETION_QUEUE_FULL_COUNT, ++#endif ++ DEBUG_MAX ++}; ++ ++#if VCHIQ_ENABLE_DEBUG ++ ++#define DEBUG_INITIALISE(local) volatile int *debug_ptr = (local)->debug; ++#define DEBUG_TRACE(d) debug_ptr[DEBUG_ ## d] = __LINE__ ++#define DEBUG_VALUE(d,v) debug_ptr[DEBUG_ ## d] = (v) ++#define DEBUG_COUNT(d) debug_ptr[DEBUG_ ## d]++ ++ ++#else /* VCHIQ_ENABLE_DEBUG */ ++ ++#define DEBUG_INITIALISE(local) ++#define DEBUG_TRACE(d) ++#define DEBUG_VALUE(d,v) ++#define DEBUG_COUNT(d) ++ ++#endif /* VCHIQ_ENABLE_DEBUG */ ++ ++typedef enum ++{ ++ VCHIQ_CONNSTATE_DISCONNECTED, ++ VCHIQ_CONNSTATE_CONNECTED, ++ VCHIQ_CONNSTATE_PAUSING, ++ VCHIQ_CONNSTATE_PAUSE_SENT, ++ VCHIQ_CONNSTATE_PAUSED, ++ VCHIQ_CONNSTATE_RESUMING ++} VCHIQ_CONNSTATE_T; ++ ++enum ++{ ++ VCHIQ_SRVSTATE_FREE, ++ VCHIQ_SRVSTATE_HIDDEN, ++ VCHIQ_SRVSTATE_LISTENING, ++ VCHIQ_SRVSTATE_OPENING, ++ VCHIQ_SRVSTATE_OPEN, ++ VCHIQ_SRVSTATE_CLOSESENT, ++ VCHIQ_SRVSTATE_CLOSING, ++ VCHIQ_SRVSTATE_CLOSEWAIT ++}; ++ ++enum ++{ ++ VCHIQ_POLL_TERMINATE, ++ VCHIQ_POLL_TXNOTIFY, ++ VCHIQ_POLL_RXNOTIFY, ++ VCHIQ_POLL_COUNT ++}; ++ ++typedef enum ++{ ++ VCHIQ_BULK_TRANSMIT, ++ VCHIQ_BULK_RECEIVE ++} VCHIQ_BULK_DIR_T; ++ ++typedef struct vchiq_bulk_struct { ++ short mode; ++ short dir; ++ void *userdata; ++ VCHI_MEM_HANDLE_T handle; ++ void *data; ++ int size; ++ void *remote_data; ++ int remote_size; ++ int actual; ++} VCHIQ_BULK_T; ++ ++typedef struct vchiq_bulk_queue_struct { ++ int local_insert; /* Where to insert the next local bulk */ ++ int remote_insert; /* Where to insert the next remote bulk (master) */ ++ int process; /* Bulk to transfer next */ ++ int remote_notify; /* Bulk to notify the remote client of next (master) */ ++ int remove; /* Bulk to notify the local client of, and remove, next */ ++ VCHIQ_BULK_T bulks[VCHIQ_NUM_SERVICE_BULKS]; ++} VCHIQ_BULK_QUEUE_T; ++ ++typedef struct remote_event_struct { ++ volatile int armed; ++ volatile int fired; ++ VCOS_EVENT_T * event; ++} REMOTE_EVENT_T; ++ ++typedef struct opaque_platform_state_t* VCHIQ_PLATFORM_STATE_T; ++ ++typedef struct vchiq_state_struct VCHIQ_STATE_T; ++ ++typedef struct vchiq_slot_struct { ++ char data[VCHIQ_SLOT_SIZE]; ++} VCHIQ_SLOT_T; ++ ++typedef struct vchiq_slot_info_struct { ++ /* Use two counters rather than one to avoid the need for a mutex. */ ++ volatile short use_count; ++ volatile short release_count; ++} VCHIQ_SLOT_INFO_T; ++ ++typedef struct vchiq_service_struct { ++ VCHIQ_SERVICE_BASE_T base; ++ volatile int srvstate; ++ unsigned int localport; ++ unsigned int remoteport; ++ int public_fourcc; ++ int client_id; ++ int auto_close; ++ VCOS_ATOMIC_FLAGS_T poll_flags; ++ short version; ++ short version_min; ++ ++ VCHIQ_STATE_T *state; ++ VCHIQ_INSTANCE_T instance; ++ ++ int service_use_count; ++ ++ VCHIQ_BULK_QUEUE_T bulk_tx; ++ VCHIQ_BULK_QUEUE_T bulk_rx; ++ ++ VCOS_EVENT_T remove_event; ++ VCOS_EVENT_T bulk_remove_event; ++ VCOS_MUTEX_T bulk_mutex; ++ ++ struct service_stats_struct ++ { ++ int quota_stalls; ++ int slot_stalls; ++ int bulk_stalls; ++ int error_count; ++ int ctrl_tx_count; ++ int ctrl_rx_count; ++ int bulk_tx_count; ++ int bulk_rx_count; ++ int bulk_aborted_count; ++ uint64_t ctrl_tx_bytes; ++ uint64_t ctrl_rx_bytes; ++ uint64_t bulk_tx_bytes; ++ uint64_t bulk_rx_bytes; ++ } stats; ++} VCHIQ_SERVICE_T; ++ ++/* The quota information is outside VCHIQ_SERVICE_T so that it can be ++ statically allocated, since for accounting reasons a service's slot ++ usage is carried over between users of the same port number. ++ */ ++typedef struct vchiq_service_quota_struct { ++ unsigned short slot_quota; ++ unsigned short slot_use_count; ++ unsigned short message_quota; ++ unsigned short message_use_count; ++ VCOS_EVENT_T quota_event; ++ int previous_tx_index; ++} VCHIQ_SERVICE_QUOTA_T; ++ ++typedef struct vchiq_shared_state_struct { ++ ++ /* A non-zero value here indicates that the content is valid. */ ++ int initialised; ++ ++ /* The first and last (inclusive) slots allocated to the owner. */ ++ int slot_first; ++ int slot_last; ++ ++ /* Signalling this event indicates that owner's slot handler thread should ++ run. */ ++ REMOTE_EVENT_T trigger; ++ ++ /* Indicates the byte position within the stream where the next message ++ will be written. The least significant bits are an index into the slot. ++ The next bits are the index of the slot in slot_queue. */ ++ volatile int tx_pos; ++ ++ /* This event should be signalled when a slot is recycled. */ ++ REMOTE_EVENT_T recycle; ++ ++ /* The slot_queue index where the next recycled slot will be written. */ ++ volatile int slot_queue_recycle; ++ ++ /* A circular buffer of slot indexes. */ ++ int slot_queue[VCHIQ_MAX_SLOTS_PER_SIDE]; ++ ++ /* Debugging state */ ++ volatile int debug[DEBUG_MAX]; ++} VCHIQ_SHARED_STATE_T; ++ ++typedef struct vchiq_slot_zero_struct { ++ int magic; ++ short version; ++ short version_min; ++ int slot_zero_size; ++ int slot_size; ++ int max_slots; ++ int max_slots_per_side; ++ int platform_data[2]; ++ VCHIQ_SHARED_STATE_T master; ++ VCHIQ_SHARED_STATE_T slave; ++ VCHIQ_SLOT_INFO_T slots[VCHIQ_MAX_SLOTS]; ++} VCHIQ_SLOT_ZERO_T; ++ ++struct vchiq_state_struct { ++ int id; ++ int initialised; ++ VCHIQ_CONNSTATE_T conn_state; ++ int is_master; ++ ++ VCHIQ_SHARED_STATE_T *local; ++ VCHIQ_SHARED_STATE_T *remote; ++ VCHIQ_SLOT_T *slot_data; ++ ++ unsigned short default_slot_quota; ++ unsigned short default_message_quota; ++ ++ VCOS_EVENT_T connect; // event indicating connect message received ++ VCOS_MUTEX_T mutex; // mutex protecting services ++ VCHIQ_INSTANCE_T *instance; ++ ++ VCOS_THREAD_T slot_handler_thread; // processes incoming messages ++ VCOS_THREAD_T recycle_thread; // processes recycled slots ++ ++ /* Local implementation of the trigger remote event */ ++ VCOS_EVENT_T trigger_event; ++ ++ /* Local implementation of the recycle remote event */ ++ VCOS_EVENT_T recycle_event; ++ ++ char *tx_data; ++ char *rx_data; ++ VCHIQ_SLOT_INFO_T *rx_info; ++ ++ VCOS_MUTEX_T slot_mutex; ++ ++ VCOS_MUTEX_T recycle_mutex; ++ ++ /* Indicates the byte position within the stream from where the next message ++ will be read. The least significant bits are an index into the slot. ++ The next bits are the index of the slot in remote->slot_queue. */ ++ int rx_pos; ++ ++ /* A cached copy of local->tx_pos. Only write to local->tx_pos, and read ++ from remote->tx_pos. */ ++ int local_tx_pos; ++ ++ /* The slot_queue index of the slot to become available next. */ ++ int slot_queue_available; ++ ++ /* A flag to indicate if any poll has been requested */ ++ int poll_needed; ++ ++ /* An array of bit sets indicating which services must be polled. */ ++ VCOS_ATOMIC_FLAGS_T poll_services[BITSET_SIZE(VCHIQ_MAX_SERVICES)]; ++ ++ /* The number of the first unused service */ ++ int unused_service; ++ ++ /* Signalled when a free slot becomes available. */ ++ VCOS_EVENT_T slot_available_event; ++ ++ VCOS_EVENT_T slot_remove_event; ++ ++ struct state_stats_struct ++ { ++ int slot_stalls; ++ int ctrl_tx_count; ++ int ctrl_rx_count; ++ int error_count; ++ } stats; ++ ++ VCHIQ_SERVICE_T *services[VCHIQ_MAX_SERVICES]; ++ VCHIQ_SERVICE_QUOTA_T service_quotas[VCHIQ_MAX_SERVICES]; ++ VCHIQ_SLOT_INFO_T slot_info[VCHIQ_MAX_SLOTS]; ++ ++ VCHIQ_PLATFORM_STATE_T platform_state; ++}; ++ ++extern VCHIQ_SLOT_ZERO_T * ++vchiq_init_slots(void *mem_base, int mem_size); ++ ++extern VCHIQ_STATUS_T ++vchiq_init_state(VCHIQ_STATE_T *state, VCHIQ_SLOT_ZERO_T *slot_zero, int is_master); ++ ++extern VCHIQ_STATUS_T ++vchiq_connect_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance); ++ ++extern VCHIQ_SERVICE_T * ++vchiq_add_service_internal(VCHIQ_STATE_T *state, ++ const VCHIQ_SERVICE_PARAMS_T *params, int srvstate, ++ VCHIQ_INSTANCE_T instance); ++ ++extern VCHIQ_STATUS_T ++vchiq_open_service_internal(VCHIQ_SERVICE_T *service, int client_id); ++ ++extern VCHIQ_STATUS_T ++vchiq_close_service_internal(VCHIQ_SERVICE_T *service, int close_recvd); ++ ++extern void ++vchiq_terminate_service_internal(VCHIQ_SERVICE_T *service); ++ ++extern void ++vchiq_free_service_internal(VCHIQ_SERVICE_T *service); ++ ++extern VCHIQ_STATUS_T ++vchiq_shutdown_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance); ++ ++extern VCHIQ_STATUS_T ++vchiq_pause_internal(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATUS_T ++vchiq_resume_internal(VCHIQ_STATE_T *state); ++ ++extern void ++remote_event_pollall(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATUS_T ++vchiq_bulk_transfer(VCHIQ_SERVICE_T *service, ++ VCHI_MEM_HANDLE_T memhandle, void *offset, int size, void *userdata, ++ VCHIQ_BULK_MODE_T mode, VCHIQ_BULK_DIR_T dir); ++ ++extern void ++vchiq_dump_state(void *dump_context, VCHIQ_STATE_T *state); ++ ++extern void ++vchiq_dump_service_state(void *dump_context, VCHIQ_SERVICE_T *service); ++ ++/* The following functions are called from vchiq_core, and external ++ implementations must be provided. */ ++ ++extern VCHIQ_STATUS_T ++vchiq_prepare_bulk_data(VCHIQ_BULK_T *bulk, ++ VCHI_MEM_HANDLE_T memhandle, void *offset, int size, int dir); ++ ++extern void ++vchiq_transfer_bulk(VCHIQ_BULK_T *bulk); ++ ++extern void ++vchiq_complete_bulk(VCHIQ_BULK_T *bulk); ++ ++extern VCHIQ_STATUS_T ++vchiq_copy_from_user(void *dst, const void *src, int size); ++ ++extern void ++remote_event_signal(REMOTE_EVENT_T *event); ++ ++extern void ++vchiq_platform_paused(VCHIQ_STATE_T *state); ++ ++extern void ++vchiq_platform_resumed(VCHIQ_STATE_T *state); ++ ++extern void ++vchiq_dump(void *dump_context, const char *str, int len); ++ ++extern void ++vchiq_dump_platform_state(void *dump_context); ++ ++extern void ++vchiq_dump_platform_instances(void *dump_context); ++ ++extern void ++vchiq_dump_platform_service_state(void *dump_context, ++ VCHIQ_SERVICE_T *service); ++ ++extern VCHIQ_STATUS_T ++vchiq_use_service_internal(VCHIQ_SERVICE_T *service); ++ ++extern VCHIQ_STATUS_T ++vchiq_release_service_internal(VCHIQ_SERVICE_T *service); ++ ++extern VCHIQ_STATUS_T ++vchiq_on_remote_use(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATUS_T ++vchiq_on_remote_release(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATUS_T ++vchiq_platform_init_state(VCHIQ_STATE_T *state); ++ ++extern void ++vchiq_on_remote_use_active(VCHIQ_STATE_T *state); ++ ++extern VCHIQ_STATUS_T ++vchiq_send_remote_use(VCHIQ_STATE_T * state); ++ ++extern VCHIQ_STATUS_T ++vchiq_send_remote_release(VCHIQ_STATE_T * state); ++ ++extern VCHIQ_STATUS_T ++vchiq_send_remote_use_active(VCHIQ_STATE_T * state); ++ ++extern void ++vchiq_platform_conn_state_changed(VCHIQ_STATE_T* state, VCHIQ_CONNSTATE_T oldstate, VCHIQ_CONNSTATE_T newstate); ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,27 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_VCHIQ_H ++#define VCHIQ_VCHIQ_H ++ ++#include "vchiq_if.h" ++#include "vchiq_util.h" ++#include "interface/vcos/vcos.h" ++ ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,155 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_IF_H ++#define VCHIQ_IF_H ++ ++#include "interface/vchi/vchi_mh.h" ++ ++#define VCHIQ_SLOT_SIZE 4096 ++#define VCHIQ_MAX_MSG_SIZE (VCHIQ_SLOT_SIZE - sizeof(VCHIQ_HEADER_T)) ++#define VCHIQ_CHANNEL_SIZE VCHIQ_MAX_MSG_SIZE /* For backwards compatibility */ ++ ++#define VCHIQ_MAKE_FOURCC(x0, x1, x2, x3) (((x0) << 24) | ((x1) << 16) | ((x2) << 8) | (x3)) ++#define VCHIQ_GET_SERVICE_USERDATA(service) (service->userdata) ++#define VCHIQ_GET_SERVICE_FOURCC(service) (service->fourcc) ++ ++typedef enum { ++ VCHIQ_SERVICE_OPENED, // service, -, - ++ VCHIQ_SERVICE_CLOSED, // service, -, - ++ VCHIQ_MESSAGE_AVAILABLE, // service, header, - ++ VCHIQ_BULK_TRANSMIT_DONE, // service, -, bulk_userdata ++ VCHIQ_BULK_RECEIVE_DONE, // service, -, bulk_userdata ++ VCHIQ_BULK_TRANSMIT_ABORTED, // service, -, bulk_userdata ++ VCHIQ_BULK_RECEIVE_ABORTED // service, -, bulk_userdata ++} VCHIQ_REASON_T; ++ ++typedef enum ++{ ++ VCHIQ_ERROR = -1, ++ VCHIQ_SUCCESS = 0, ++ VCHIQ_RETRY = 1 ++} VCHIQ_STATUS_T; ++ ++typedef enum ++{ ++ VCHIQ_BULK_MODE_CALLBACK, ++ VCHIQ_BULK_MODE_BLOCKING, ++ VCHIQ_BULK_MODE_NOCALLBACK ++} VCHIQ_BULK_MODE_T; ++ ++typedef enum ++{ ++ VCHIQ_SERVICE_OPTION_AUTOCLOSE, ++ VCHIQ_SERVICE_OPTION_SLOT_QUOTA, ++ VCHIQ_SERVICE_OPTION_MESSAGE_QUOTA ++} VCHIQ_SERVICE_OPTION_T; ++ ++#ifdef __HIGHC__ ++/* Allow zero-sized arrays without warnings */ ++#pragma warning (push) ++#pragma warning (disable : 4200) ++#endif ++ ++typedef struct vchiq_header_struct { ++ /* The message identifier - opaque to applications. */ ++ int msgid; ++ ++ /* Size of message data. */ ++ unsigned int size; ++ ++ char data[0]; /* message */ ++} VCHIQ_HEADER_T; ++ ++#ifdef __HIGHC__ ++#pragma warning (pop) ++#endif ++ ++typedef struct { ++ const void *data; ++ int size; ++} VCHIQ_ELEMENT_T; ++ ++typedef const struct vchiq_service_base_struct *VCHIQ_SERVICE_HANDLE_T; ++ ++typedef VCHIQ_STATUS_T (*VCHIQ_CALLBACK_T)(VCHIQ_REASON_T, VCHIQ_HEADER_T *, VCHIQ_SERVICE_HANDLE_T, void *); ++ ++typedef struct vchiq_service_base_struct { ++ int fourcc; ++ VCHIQ_CALLBACK_T callback; ++ void *userdata; ++} VCHIQ_SERVICE_BASE_T; ++ ++typedef struct vchiq_service_params_struct { ++ int fourcc; ++ VCHIQ_CALLBACK_T callback; ++ void *userdata; ++ short version; /* Increment for non-trivial changes */ ++ short version_min; /* Update for incompatible changes */ ++} VCHIQ_SERVICE_PARAMS_T; ++ ++typedef struct vchiq_config_struct { ++ int max_msg_size; ++ int bulk_threshold; /* The message size aboce which it is better to use ++ a bulk transfer (<= max_msg_size) */ ++ int max_outstanding_bulks; ++ int max_services; ++ short version; /* The version of VCHIQ */ ++ short version_min; /* The minimum compatible version of VCHIQ */ ++} VCHIQ_CONFIG_T; ++ ++typedef struct vchiq_instance_struct *VCHIQ_INSTANCE_T; ++typedef void (*VCHIQ_REMOTE_USE_CALLBACK_T)(void* cb_arg); ++ ++ ++extern VCHIQ_STATUS_T vchiq_initialise(VCHIQ_INSTANCE_T *pinstance); ++extern VCHIQ_STATUS_T vchiq_shutdown(VCHIQ_INSTANCE_T instance); ++extern VCHIQ_STATUS_T vchiq_connect(VCHIQ_INSTANCE_T instance); ++extern VCHIQ_STATUS_T vchiq_add_service(VCHIQ_INSTANCE_T instance, int fourcc, VCHIQ_CALLBACK_T callback, void *userdata, VCHIQ_SERVICE_HANDLE_T *pservice); ++extern VCHIQ_STATUS_T vchiq_open_service(VCHIQ_INSTANCE_T instance, int fourcc, VCHIQ_CALLBACK_T callback, void *userdata, VCHIQ_SERVICE_HANDLE_T *pservice); ++extern VCHIQ_STATUS_T vchiq_add_service_params(VCHIQ_INSTANCE_T instance, ++ const VCHIQ_SERVICE_PARAMS_T *params, ++ VCHIQ_SERVICE_HANDLE_T *pservice); ++extern VCHIQ_STATUS_T vchiq_open_service_params(VCHIQ_INSTANCE_T instance, ++ const VCHIQ_SERVICE_PARAMS_T *params, ++ VCHIQ_SERVICE_HANDLE_T *pservice); ++extern VCHIQ_STATUS_T vchiq_close_service(VCHIQ_SERVICE_HANDLE_T service); ++extern VCHIQ_STATUS_T vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T service); ++extern VCHIQ_STATUS_T vchiq_use_service(VCHIQ_SERVICE_HANDLE_T service); ++extern VCHIQ_STATUS_T vchiq_release_service(VCHIQ_SERVICE_HANDLE_T service); ++ ++extern VCHIQ_STATUS_T vchiq_queue_message(VCHIQ_SERVICE_HANDLE_T service, const VCHIQ_ELEMENT_T *elements, int count); ++extern void vchiq_release_message(VCHIQ_SERVICE_HANDLE_T service, VCHIQ_HEADER_T *header); ++extern VCHIQ_STATUS_T vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T service, const void *data, int size, void *userdata); ++extern VCHIQ_STATUS_T vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T service, void *data, int size, void *userdata); ++extern VCHIQ_STATUS_T vchiq_queue_bulk_transmit_handle(VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle, const void *offset, int size, void *userdata); ++extern VCHIQ_STATUS_T vchiq_queue_bulk_receive_handle(VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle, void *offset, int size, void *userdata); ++extern VCHIQ_STATUS_T vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T service, const void *data, int size, void *userdata, VCHIQ_BULK_MODE_T mode); ++extern VCHIQ_STATUS_T vchiq_bulk_receive(VCHIQ_SERVICE_HANDLE_T service, void *data, int size, void *userdata, VCHIQ_BULK_MODE_T mode); ++extern VCHIQ_STATUS_T vchiq_bulk_transmit_handle(VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle, const void *offset, int size, void *userdata, VCHIQ_BULK_MODE_T mode); ++extern VCHIQ_STATUS_T vchiq_bulk_receive_handle(VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle, void *offset, int size, void *userdata, VCHIQ_BULK_MODE_T mode); ++extern int vchiq_get_client_id(VCHIQ_SERVICE_HANDLE_T service); ++extern VCHIQ_STATUS_T vchiq_get_config(VCHIQ_INSTANCE_T instance, int config_size, VCHIQ_CONFIG_T *pconfig); ++extern VCHIQ_STATUS_T vchiq_set_service_option(VCHIQ_SERVICE_HANDLE_T service, VCHIQ_SERVICE_OPTION_T option, int value); ++ ++extern VCHIQ_STATUS_T vchiq_remote_use(VCHIQ_INSTANCE_T instance, VCHIQ_REMOTE_USE_CALLBACK_T callback, void* cb_arg); ++extern VCHIQ_STATUS_T vchiq_remote_release(VCHIQ_INSTANCE_T instance); ++ ++extern VCHIQ_STATUS_T vchiq_dump_phys_mem( VCHIQ_SERVICE_HANDLE_T service, void *ptr, size_t num_bytes ); ++ ++#endif /* VCHIQ_IF_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,105 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_IOCTLS_H ++#define VCHIQ_IOCTLS_H ++ ++#include ++#include "vchiq_if.h" ++ ++#define VCHIQ_IOC_MAGIC 0xc4 ++#define VCHIQ_INVALID_HANDLE -1 ++ ++typedef struct { ++ VCHIQ_SERVICE_PARAMS_T params; ++ int is_open; ++ int is_vchi; ++ int handle; /* OUT */ ++} VCHIQ_CREATE_SERVICE_T; ++ ++typedef struct { ++ int handle; ++ int count; ++ const VCHIQ_ELEMENT_T *elements; ++} VCHIQ_QUEUE_MESSAGE_T; ++ ++typedef struct { ++ int handle; ++ void *data; ++ int size; ++ void *userdata; ++ VCHIQ_BULK_MODE_T mode; ++} VCHIQ_QUEUE_BULK_TRANSFER_T; ++ ++typedef struct { ++ VCHIQ_REASON_T reason; ++ VCHIQ_HEADER_T *header; ++ void *service_userdata; ++ void *bulk_userdata; ++} VCHIQ_COMPLETION_DATA_T; ++ ++typedef struct { ++ int count; ++ VCHIQ_COMPLETION_DATA_T *buf; ++ int msgbufsize; ++ int msgbufcount; /* IN/OUT */ ++ void **msgbufs; ++} VCHIQ_AWAIT_COMPLETION_T; ++ ++typedef struct { ++ int handle; ++ int blocking; ++ int bufsize; ++ void *buf; ++} VCHIQ_DEQUEUE_MESSAGE_T; ++ ++typedef struct { ++ int config_size; ++ VCHIQ_CONFIG_T *pconfig; ++} VCHIQ_GET_CONFIG_T; ++ ++typedef struct { ++ int handle; ++ VCHIQ_SERVICE_OPTION_T option; ++ int value; ++} VCHIQ_SET_SERVICE_OPTION_T; ++ ++typedef struct { ++ void *virt_addr; ++ size_t num_bytes; ++} VCHIQ_DUMP_MEM_T; ++ ++#define VCHIQ_IOC_CONNECT _IO(VCHIQ_IOC_MAGIC, 0) ++#define VCHIQ_IOC_SHUTDOWN _IO(VCHIQ_IOC_MAGIC, 1) ++#define VCHIQ_IOC_CREATE_SERVICE _IOWR(VCHIQ_IOC_MAGIC, 2, VCHIQ_CREATE_SERVICE_T) ++#define VCHIQ_IOC_REMOVE_SERVICE _IO(VCHIQ_IOC_MAGIC, 3) ++#define VCHIQ_IOC_QUEUE_MESSAGE _IOW(VCHIQ_IOC_MAGIC, 4, VCHIQ_QUEUE_MESSAGE_T) ++#define VCHIQ_IOC_QUEUE_BULK_TRANSMIT _IOW(VCHIQ_IOC_MAGIC, 5, VCHIQ_QUEUE_BULK_TRANSFER_T) ++#define VCHIQ_IOC_QUEUE_BULK_RECEIVE _IOW(VCHIQ_IOC_MAGIC, 6, VCHIQ_QUEUE_BULK_TRANSFER_T) ++#define VCHIQ_IOC_AWAIT_COMPLETION _IOWR(VCHIQ_IOC_MAGIC, 7, VCHIQ_AWAIT_COMPLETION_T) ++#define VCHIQ_IOC_DEQUEUE_MESSAGE _IOWR(VCHIQ_IOC_MAGIC, 8, VCHIQ_DEQUEUE_MESSAGE_T) ++#define VCHIQ_IOC_GET_CLIENT_ID _IO(VCHIQ_IOC_MAGIC, 9) ++#define VCHIQ_IOC_GET_CONFIG _IOWR(VCHIQ_IOC_MAGIC, 10, VCHIQ_GET_CONFIG_T) ++#define VCHIQ_IOC_CLOSE_SERVICE _IO(VCHIQ_IOC_MAGIC, 11) ++#define VCHIQ_IOC_USE_SERVICE _IO(VCHIQ_IOC_MAGIC, 12) ++#define VCHIQ_IOC_RELEASE_SERVICE _IO(VCHIQ_IOC_MAGIC, 13) ++#define VCHIQ_IOC_SET_SERVICE_OPTION _IOW(VCHIQ_IOC_MAGIC, 14, VCHIQ_SET_SERVICE_OPTION_T) ++#define VCHIQ_IOC_DUMP_PHYS_MEM _IOW(VCHIQ_IOC_MAGIC, 15, VCHIQ_DUMP_MEM_T) ++#define VCHIQ_IOC_MAX 15 ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,297 @@ ++/***************************************************************************** ++* Copyright 2001 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/* ---- Include Files ---------------------------------------------------- */ ++ ++#include ++#include ++ ++#include "vchiq_core.h" ++#include "vchiq_arm.h" ++#include "interface/vcos/vcos_logging.h" ++ ++/* ---- Public Variables ------------------------------------------------- */ ++ ++extern VCOS_LOG_CAT_T vchiq_core_log_category; ++#define VCOS_LOG_CATEGORY (&vchiq_core_log_category) ++ ++/* ---- Private Constants and Types -------------------------------------- */ ++ ++struct vchiq_instance_struct { ++ VCHIQ_STATE_T *state; ++ ++ int connected; ++}; ++ ++/**************************************************************************** ++* ++* vchiq_initialise ++* ++***************************************************************************/ ++ ++VCHIQ_STATUS_T vchiq_initialise( VCHIQ_INSTANCE_T *instanceOut ) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_ERROR; ++ VCHIQ_STATE_T *state; ++ VCHIQ_INSTANCE_T instance = NULL; ++ ++ vcos_log_trace( "%s called", __func__ ); ++ ++ state = vchiq_get_state(); ++ if (!state) ++ { ++ printk( KERN_ERR "%s: videocore not initialized\n", __func__ ); ++ goto failed; ++ } ++ ++ instance = kzalloc( sizeof(*instance), GFP_KERNEL ); ++ if( !instance ) ++ { ++ printk( KERN_ERR "%s: error allocating vchiq instance\n", __func__ ); ++ goto failed; ++ } ++ ++ instance->connected = 0; ++ instance->state = state; ++ ++ *instanceOut = instance; ++ ++ status = VCHIQ_SUCCESS; ++ ++failed: ++ vcos_log_trace( "%s(%p): returning %d", __func__, instance, status ); ++ ++ return status; ++} ++ ++/**************************************************************************** ++* ++* vchiq_shutdown ++* ++***************************************************************************/ ++ ++VCHIQ_STATUS_T vchiq_shutdown( VCHIQ_INSTANCE_T instance ) ++{ ++ VCHIQ_STATUS_T status; ++ VCHIQ_STATE_T *state = instance->state; ++ ++ vcos_log_trace( "%s(%p) called", __func__, instance ); ++ ++ vcos_mutex_lock(&state->mutex); ++ ++ /* Remove all services */ ++ status = vchiq_shutdown_internal(state, instance); ++ ++ vcos_mutex_unlock(&state->mutex); ++ ++ if (status == VCHIQ_SUCCESS) ++ kfree(instance); ++ ++ vcos_log_trace( "%s(%p): returning %d", __func__, instance, status ); ++ ++ return status; ++} ++ ++/**************************************************************************** ++* ++* vchiq_is_connected ++* ++***************************************************************************/ ++ ++int vchiq_is_connected(VCHIQ_INSTANCE_T instance) ++{ ++ return instance->connected; ++} ++ ++/**************************************************************************** ++* ++* vchiq_connect ++* ++***************************************************************************/ ++ ++VCHIQ_STATUS_T vchiq_connect(VCHIQ_INSTANCE_T instance) ++{ ++ VCHIQ_STATUS_T status; ++ VCHIQ_STATE_T *state = instance->state; ++ ++ vcos_log_trace( "%s(%p) called", __func__, instance ); ++ ++ if (vcos_mutex_lock(&state->mutex) != VCOS_SUCCESS) { ++ vcos_log_trace( "%s: call to vcos_mutex_lock failed", __func__ ); ++ status = VCHIQ_RETRY; ++ goto failed; ++ } ++ status = vchiq_connect_internal(state, instance); ++ ++ if (status == VCHIQ_SUCCESS) ++ instance->connected = 1; ++ ++ vcos_mutex_unlock(&state->mutex); ++ ++failed: ++ vcos_log_trace( "%s(%p): returning %d", __func__, instance, status ); ++ ++ return status; ++} ++ ++/**************************************************************************** ++* ++* vchiq_add_service ++* ++***************************************************************************/ ++ ++VCHIQ_STATUS_T vchiq_add_service( ++ VCHIQ_INSTANCE_T instance, ++ int fourcc, ++ VCHIQ_CALLBACK_T callback, ++ void *userdata, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_SERVICE_PARAMS_T params; ++ ++ params.fourcc = fourcc; ++ params.callback = callback; ++ params.userdata = userdata; ++ params.version = 0; ++ params.version_min = 0; ++ ++ return vchiq_add_service_params(instance, ¶ms, pservice); ++} ++ ++/**************************************************************************** ++* ++* vchiq_open_service ++* ++***************************************************************************/ ++ ++VCHIQ_STATUS_T vchiq_open_service( ++ VCHIQ_INSTANCE_T instance, ++ int fourcc, ++ VCHIQ_CALLBACK_T callback, ++ void *userdata, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_SERVICE_PARAMS_T params; ++ ++ params.fourcc = fourcc; ++ params.callback = callback; ++ params.userdata = userdata; ++ params.version = 0; ++ params.version_min = 0; ++ ++ return vchiq_open_service_params(instance, ¶ms, pservice); ++} ++ ++/**************************************************************************** ++* ++* vchiq_add_service_params ++* ++***************************************************************************/ ++ ++VCHIQ_STATUS_T vchiq_add_service_params( ++ VCHIQ_INSTANCE_T instance, ++ const VCHIQ_SERVICE_PARAMS_T *params, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_STATUS_T status; ++ VCHIQ_STATE_T *state = instance->state; ++ VCHIQ_SERVICE_T *service; ++ int srvstate; ++ ++ vcos_log_trace( "%s(%p) called", __func__, instance ); ++ ++ *pservice = NULL; ++ ++ srvstate = vchiq_is_connected( instance ) ++ ? VCHIQ_SRVSTATE_LISTENING ++ : VCHIQ_SRVSTATE_HIDDEN; ++ ++ vcos_mutex_lock(&state->mutex); ++ ++ service = vchiq_add_service_internal( ++ state, ++ params, ++ srvstate, ++ instance); ++ ++ vcos_mutex_unlock(&state->mutex); ++ ++ if ( service ) ++ { ++ *pservice = &service->base; ++ status = VCHIQ_SUCCESS; ++ } ++ else ++ { ++ status = VCHIQ_ERROR; ++ } ++ ++ vcos_log_trace( "%s(%p): returning %d", __func__, instance, status ); ++ ++ return status; ++} ++ ++/**************************************************************************** ++* ++* vchiq_open_service_params ++* ++***************************************************************************/ ++ ++VCHIQ_STATUS_T vchiq_open_service_params( ++ VCHIQ_INSTANCE_T instance, ++ const VCHIQ_SERVICE_PARAMS_T *params, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_ERROR; ++ VCHIQ_STATE_T *state = instance->state; ++ VCHIQ_SERVICE_T *service; ++ ++ vcos_log_trace( "%s(%p) called", __func__, instance ); ++ ++ *pservice = NULL; ++ ++ if (!vchiq_is_connected(instance)) ++ goto failed; ++ ++ vcos_mutex_lock(&state->mutex); ++ ++ service = vchiq_add_service_internal(state, ++ params, ++ VCHIQ_SRVSTATE_OPENING, ++ instance); ++ ++ vcos_mutex_unlock(&state->mutex); ++ ++ if ( service ) ++ { ++ status = vchiq_open_service_internal(service, current->pid); ++ if ( status == VCHIQ_SUCCESS ) ++ *pservice = &service->base; ++ else ++ vchiq_remove_service(&service->base); ++ } ++ ++failed: ++ vcos_log_trace( "%s(%p): returning %d", __func__, instance, status ); ++ ++ return status; ++} ++ ++EXPORT_SYMBOL(vchiq_initialise); ++EXPORT_SYMBOL(vchiq_shutdown); ++EXPORT_SYMBOL(vchiq_connect); ++EXPORT_SYMBOL(vchiq_add_service); ++EXPORT_SYMBOL(vchiq_open_service); ++EXPORT_SYMBOL(vchiq_add_service_params); ++EXPORT_SYMBOL(vchiq_open_service_params); +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_lib.c bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_lib.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_lib.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_lib.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,1628 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include "vchiq.h" ++#include "vchiq_cfg.h" ++#include "vchiq_ioctl.h" ++#include "interface/vchi/vchi.h" ++#include "interface/vchi/common/endian.h" ++#include "interface/vcos/vcos.h" ++ ++#define VCHIQ_MAX_INSTANCE_SERVICES 32 ++#define MSGBUF_SIZE (VCHIQ_MAX_MSG_SIZE + sizeof(VCHIQ_HEADER_T)) ++ ++#define RETRY(r,x) do { r = x; } while ((r == -1) && (errno == EINTR)) ++ ++#define VCOS_LOG_CATEGORY (&vchiq_lib_log_category) ++ ++typedef struct vchiq_service_struct ++{ ++ VCHIQ_SERVICE_BASE_T base; ++ int handle; ++ int fd; ++ VCHI_CALLBACK_T vchi_callback; ++ void *peek_buf; ++ int peek_size; ++ int client_id; ++} VCHIQ_SERVICE_T; ++ ++typedef struct vchiq_service_struct VCHI_SERVICE_T; ++ ++struct vchiq_instance_struct ++{ ++ int fd; ++ int initialised; ++ int connected; ++ VCOS_THREAD_T completion_thread; ++ VCOS_MUTEX_T mutex; ++ int used_services; ++ VCHIQ_SERVICE_T services[VCHIQ_MAX_INSTANCE_SERVICES]; ++} vchiq_instance; ++ ++typedef struct vchiq_instance_struct VCHI_STATE_T; ++ ++/* Local data */ ++static VCOS_LOG_LEVEL_T vchiq_default_lib_log_level = VCOS_LOG_WARN; ++static VCOS_LOG_CAT_T vchiq_lib_log_category; ++static VCOS_MUTEX_T vchiq_lib_mutex; ++static void *free_msgbufs; ++ ++ ++/* Local utility functions */ ++static VCHIQ_INSTANCE_T ++vchiq_lib_init(void); ++ ++static void *completion_thread(void *); ++ ++static VCHIQ_STATUS_T ++create_service(VCHIQ_INSTANCE_T instance, ++ const VCHIQ_SERVICE_PARAMS_T *params, ++ VCHI_CALLBACK_T vchi_callback, ++ int is_open, ++ VCHIQ_SERVICE_HANDLE_T *pservice); ++ ++static int ++fill_peek_buf(VCHI_SERVICE_T *service, ++ VCHI_FLAGS_T flags); ++ ++static void * ++alloc_msgbuf(void); ++ ++static void ++free_msgbuf(void *buf); ++ ++static __inline int ++is_valid_instance(VCHIQ_INSTANCE_T instance) ++{ ++ return (instance == &vchiq_instance) && (instance->initialised > 0); ++} ++ ++static __inline int ++is_valid_service(VCHIQ_SERVICE_T *service) ++{ ++ return ((service != NULL) && (service->fd != VCHIQ_INVALID_HANDLE)); ++} ++ ++/* ++ * VCHIQ API ++ */ ++ ++VCHIQ_STATUS_T ++vchiq_initialise(VCHIQ_INSTANCE_T *pinstance) ++{ ++ VCHIQ_INSTANCE_T instance; ++ ++ instance = vchiq_lib_init(); ++ ++ vcos_log_trace( "%s: returning instance handle %p", __func__, instance ); ++ ++ *pinstance = instance; ++ ++ return (instance != NULL) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++VCHIQ_STATUS_T ++vchiq_shutdown(VCHIQ_INSTANCE_T instance) ++{ ++ vcos_log_trace( "%s called", __func__ ); ++ ++ if (!is_valid_instance(instance)) ++ return VCHIQ_ERROR; ++ ++ vcos_mutex_lock(&instance->mutex); ++ ++ if (instance->initialised == 1) ++ { ++ int i; ++ ++ instance->initialised = -1; /* Enter limbo */ ++ ++ /* Remove all services */ ++ ++ for (i = 0; i < instance->used_services; i++) ++ { ++ if (instance->services[i].handle != VCHIQ_INVALID_HANDLE) ++ { ++ vchiq_remove_service(&instance->services[i].base); ++ instance->services[i].handle = VCHIQ_INVALID_HANDLE; ++ } ++ } ++ ++ if (instance->connected) ++ { ++ int ret; ++ RETRY(ret, ioctl(instance->fd, VCHIQ_IOC_SHUTDOWN, 0)); ++ vcos_assert(ret == 0); ++ vcos_thread_join(&instance->completion_thread, NULL); ++ instance->connected = 0; ++ } ++ ++ close(instance->fd); ++ instance->fd = -1; ++ } ++ else if (instance->initialised > 1) ++ { ++ instance->initialised--; ++ } ++ ++ vcos_mutex_unlock(&instance->mutex); ++ ++ vcos_global_lock(); ++ ++ if (instance->initialised == -1) ++ { ++ vcos_mutex_delete(&instance->mutex); ++ instance->initialised = 0; ++ } ++ ++ vcos_global_unlock(); ++ ++ vcos_log_trace( "%s returning", __func__ ); ++ ++ return VCHIQ_SUCCESS; ++} ++ ++VCHIQ_STATUS_T ++vchiq_connect(VCHIQ_INSTANCE_T instance) ++{ ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ ++ vcos_log_trace( "%s called", __func__ ); ++ ++ if (!is_valid_instance(instance)) ++ return VCHIQ_ERROR; ++ ++ vcos_mutex_lock(&instance->mutex); ++ ++ if (!instance->connected) ++ { ++ int ret = ioctl(instance->fd, VCHIQ_IOC_CONNECT, 0); ++ if (ret == 0) ++ { ++ VCOS_THREAD_ATTR_T attrs; ++ instance->connected = 1; ++ vcos_thread_attr_init(&attrs); ++ vcos_thread_create(&instance->completion_thread, "VCHIQ completion", ++ &attrs, completion_thread, instance); ++ } ++ else ++ { ++ status = VCHIQ_ERROR; ++ } ++ } ++ ++ vcos_mutex_unlock(&instance->mutex); ++ ++ return status; ++} ++ ++VCHIQ_STATUS_T ++vchiq_add_service(VCHIQ_INSTANCE_T instance, ++ int fourcc, ++ VCHIQ_CALLBACK_T callback, ++ void *userdata, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_SERVICE_PARAMS_T params; ++ ++ params.fourcc = fourcc; ++ params.callback = callback; ++ params.userdata = userdata; ++ params.version = 0; ++ params.version_min = 0; ++ ++ return vchiq_add_service_params(instance, ¶ms, pservice); ++} ++ ++VCHIQ_STATUS_T ++vchiq_open_service(VCHIQ_INSTANCE_T instance, ++ int fourcc, ++ VCHIQ_CALLBACK_T callback, ++ void *userdata, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_SERVICE_PARAMS_T params; ++ ++ params.fourcc = fourcc; ++ params.callback = callback; ++ params.userdata = userdata; ++ params.version = 0; ++ params.version_min = 0; ++ ++ return vchiq_open_service_params(instance, ¶ms, pservice); ++} ++ ++VCHIQ_STATUS_T ++vchiq_add_service_params(VCHIQ_INSTANCE_T instance, ++ const VCHIQ_SERVICE_PARAMS_T *params, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_STATUS_T status; ++ ++ vcos_log_trace( "%s called fourcc = 0x%08x (%c%c%c%c)", ++ __func__, ++ params->fourcc, ++ (params->fourcc >> 24) & 0xff, ++ (params->fourcc >> 16) & 0xff, ++ (params->fourcc >> 8) & 0xff, ++ (params->fourcc ) & 0xff ); ++ ++ if (!params->callback) ++ return VCHIQ_ERROR; ++ ++ if (!is_valid_instance(instance)) ++ return VCHIQ_ERROR; ++ ++ status = create_service(instance, ++ params, ++ NULL/*vchi_callback*/, ++ 0/*!open*/, ++ pservice); ++ ++ vcos_log_trace( "%s returning service handle = 0x%08x", __func__, (uint32_t)*pservice ); ++ ++ return status; ++} ++ ++VCHIQ_STATUS_T ++vchiq_open_service_params(VCHIQ_INSTANCE_T instance, ++ const VCHIQ_SERVICE_PARAMS_T *params, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_STATUS_T status; ++ ++ vcos_log_trace( "%s called fourcc = 0x%08x (%c%c%c%c)", ++ __func__, ++ params->fourcc, ++ (params->fourcc >> 24) & 0xff, ++ (params->fourcc >> 16) & 0xff, ++ (params->fourcc >> 8) & 0xff, ++ (params->fourcc ) & 0xff ); ++ ++ if (!params->callback) ++ return VCHIQ_ERROR; ++ ++ if (!is_valid_instance(instance)) ++ return VCHIQ_ERROR; ++ ++ status = create_service(instance, ++ params, ++ NULL/*vchi_callback*/, ++ 1/*open*/, ++ pservice); ++ ++ vcos_log_trace( "%s returning service handle = 0x%08x", __func__, (uint32_t)*pservice ); ++ ++ return status; ++} ++ ++VCHIQ_STATUS_T ++vchiq_close_service(VCHIQ_SERVICE_HANDLE_T handle) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ int ret; ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_CLOSE_SERVICE, service->handle)); ++ ++ if (ret != 0) ++ return VCHIQ_ERROR; ++ ++ service->handle = VCHIQ_INVALID_HANDLE; ++ return VCHIQ_SUCCESS; ++} ++ ++VCHIQ_STATUS_T ++vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T handle) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ int ret; ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_REMOVE_SERVICE, service->handle)); ++ ++ if (ret != 0) ++ return VCHIQ_ERROR; ++ ++ service->handle = VCHIQ_INVALID_HANDLE; ++ return VCHIQ_SUCCESS; ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_message(VCHIQ_SERVICE_HANDLE_T handle, ++ const VCHIQ_ELEMENT_T *elements, ++ int count) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ VCHIQ_QUEUE_MESSAGE_T args; ++ int ret; ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ args.handle = service->handle; ++ args.elements = elements; ++ args.count = count; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_MESSAGE, &args)); ++ ++ return (ret >= 0) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++void ++vchiq_release_message(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHIQ_HEADER_T *header) ++{ ++ vcos_log_trace( "%s handle=%08x, header=%x", __func__, (uint32_t)handle, (uint32_t)header ); ++ ++ free_msgbuf(header); ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle, ++ const void *data, ++ int size, ++ void *userdata) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ VCHIQ_QUEUE_BULK_TRANSFER_T args; ++ int ret; ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ args.handle = service->handle; ++ args.data = (void *)data; ++ args.size = size; ++ args.userdata = userdata; ++ args.mode = VCHIQ_BULK_MODE_CALLBACK; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_BULK_TRANSMIT, &args)); ++ ++ return (ret >= 0) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, ++ void *data, ++ int size, ++ void *userdata) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ VCHIQ_QUEUE_BULK_TRANSFER_T args; ++ int ret; ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ args.handle = service->handle; ++ args.data = data; ++ args.size = size; ++ args.userdata = userdata; ++ args.mode = VCHIQ_BULK_MODE_CALLBACK; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_BULK_RECEIVE, &args)); ++ ++ return (ret >= 0) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_bulk_transmit_handle(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T memhandle, ++ const void *offset, ++ int size, ++ void *userdata) ++{ ++ vcos_assert(memhandle == VCHI_MEM_HANDLE_INVALID); ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ return vchiq_queue_bulk_transmit(handle, offset, size, userdata); ++} ++ ++VCHIQ_STATUS_T ++vchiq_queue_bulk_receive_handle(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T memhandle, ++ void *offset, ++ int size, ++ void *userdata) ++{ ++ vcos_assert(memhandle == VCHI_MEM_HANDLE_INVALID); ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ return vchiq_queue_bulk_receive(handle, offset, size, userdata); ++} ++ ++VCHIQ_STATUS_T ++vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle, ++ const void *data, ++ int size, ++ void *userdata, ++ VCHIQ_BULK_MODE_T mode) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ VCHIQ_QUEUE_BULK_TRANSFER_T args; ++ int ret; ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ args.handle = service->handle; ++ args.data = (void *)data; ++ args.size = size; ++ args.userdata = userdata; ++ args.mode = mode; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_BULK_TRANSMIT, &args)); ++ ++ return (ret >= 0) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++VCHIQ_STATUS_T ++vchiq_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, ++ void *data, ++ int size, ++ void *userdata, ++ VCHIQ_BULK_MODE_T mode) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ VCHIQ_QUEUE_BULK_TRANSFER_T args; ++ int ret; ++ ++ vcos_log_trace( "%s called service handle = 0x%08x", __func__, (uint32_t)handle ); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ args.handle = service->handle; ++ args.data = data; ++ args.size = size; ++ args.userdata = userdata; ++ args.mode = mode; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_BULK_RECEIVE, &args)); ++ ++ return (ret >= 0) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++VCHIQ_STATUS_T ++vchiq_bulk_transmit_handle(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T memhandle, ++ const void *offset, ++ int size, ++ void *userdata, ++ VCHIQ_BULK_MODE_T mode) ++{ ++ vcos_assert(memhandle == VCHI_MEM_HANDLE_INVALID); ++ ++ return vchiq_bulk_transmit(handle, offset, size, userdata, mode); ++} ++ ++VCHIQ_STATUS_T ++vchiq_bulk_receive_handle(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T memhandle, ++ void *offset, ++ int size, ++ void *userdata, ++ VCHIQ_BULK_MODE_T mode) ++{ ++ vcos_assert(memhandle == VCHI_MEM_HANDLE_INVALID); ++ ++ return vchiq_bulk_receive(handle, offset, size, userdata, mode); ++} ++ ++int ++vchiq_get_client_id(VCHIQ_SERVICE_HANDLE_T handle) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ return ioctl(service->fd, VCHIQ_IOC_GET_CLIENT_ID, service->handle); ++} ++ ++VCHIQ_STATUS_T ++vchiq_get_config(VCHIQ_INSTANCE_T instance, ++ int config_size, ++ VCHIQ_CONFIG_T *pconfig) ++{ ++ VCHIQ_GET_CONFIG_T args; ++ int ret; ++ ++ if (!is_valid_instance(instance)) ++ return VCHIQ_ERROR; ++ ++ args.config_size = config_size; ++ args.pconfig = pconfig; ++ ++ RETRY(ret, ioctl(instance->fd, VCHIQ_IOC_GET_CONFIG, &args)); ++ ++ return (ret >= 0) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++int32_t ++vchiq_use_service( const VCHIQ_SERVICE_HANDLE_T handle ) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_USE_SERVICE, service->handle)); ++ return ret; ++} ++ ++int32_t ++vchiq_release_service( const VCHIQ_SERVICE_HANDLE_T handle ) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ int ret; ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_RELEASE_SERVICE, service->handle)); ++ return ret; ++} ++ ++VCHIQ_STATUS_T ++vchiq_set_service_option(VCHIQ_SERVICE_HANDLE_T handle, ++ VCHIQ_SERVICE_OPTION_T option, int value) ++{ ++ VCHIQ_SET_SERVICE_OPTION_T args; ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ args.handle = service->handle; ++ args.option = option; ++ args.value = value; ++ ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_SET_SERVICE_OPTION, &args)); ++ ++ return (ret >= 0) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++/* ++ * VCHI API ++ */ ++ ++/* ---------------------------------------------------------------------- ++ * return pointer to the mphi message driver function table ++ * -------------------------------------------------------------------- */ ++const VCHI_MESSAGE_DRIVER_T * ++vchi_mphi_message_driver_func_table( void ) ++{ ++ return NULL; ++} ++ ++/* ---------------------------------------------------------------------- ++ * return a pointer to the 'single' connection driver fops ++ * -------------------------------------------------------------------- */ ++const VCHI_CONNECTION_API_T * ++single_get_func_table( void ) ++{ ++ return NULL; ++} ++ ++VCHI_CONNECTION_T * ++vchi_create_connection( const VCHI_CONNECTION_API_T * function_table, ++ const VCHI_MESSAGE_DRIVER_T * low_level ) ++{ ++ vcos_unused(function_table); ++ vcos_unused(low_level); ++ ++ return NULL; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_peek ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle, ++ * void **data, ++ * uint32_t *msg_size, ++ * VCHI_FLAGS_T flags ++ * ++ * Description: Routine to return a pointer to the current message (to allow in place processing) ++ * The message can be removed using vchi_msg_remove when you're finished ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_msg_peek( VCHI_SERVICE_HANDLE_T handle, ++ void **data, ++ uint32_t *msg_size, ++ VCHI_FLAGS_T flags ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ ret = fill_peek_buf(service, flags); ++ ++ if (ret == 0) ++ { ++ *data = service->peek_buf; ++ *msg_size = service->peek_size; ++ } ++ ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_remove ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle, ++ * ++ * Description: Routine to remove a message (after it has been read with vchi_msg_peek) ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_msg_remove( VCHI_SERVICE_HANDLE_T handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ /* Why would you call vchi_msg_remove without calling vchi_msg_peek first? */ ++ vcos_assert(service->peek_size >= 0); ++ ++ /* Invalidate the content but reuse the buffer */ ++ service->peek_size = -1; ++ ++ return 0; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_queue ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * const void *data, ++ * uint32_t data_size, ++ * VCHI_FLAGS_T flags, ++ * void *msg_handle, ++ * ++ * Description: Thin wrapper to queue a message onto a connection ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_msg_queue( VCHI_SERVICE_HANDLE_T handle, ++ const void * data, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void * msg_handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ VCHIQ_QUEUE_MESSAGE_T args; ++ VCHIQ_ELEMENT_T element = {data, data_size}; ++ int ret; ++ ++ vcos_unused(msg_handle); ++ vcos_assert(flags == VCHI_FLAGS_BLOCK_UNTIL_QUEUED); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ args.handle = service->handle; ++ args.elements = &element; ++ args.count = 1; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_MESSAGE, &args)); ++ ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_bulk_queue_receive ++ * ++ * Arguments: VCHI_BULK_HANDLE_T handle, ++ * void *data_dst, ++ * const uint32_t data_size, ++ * VCHI_FLAGS_T flags ++ * void *bulk_handle ++ * ++ * Description: Routine to setup a rcv buffer ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_bulk_queue_receive( VCHI_SERVICE_HANDLE_T handle, ++ void * data_dst, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void * bulk_handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ VCHIQ_QUEUE_BULK_TRANSFER_T args; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ switch ((int)flags) { ++ case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ args.mode = VCHIQ_BULK_MODE_CALLBACK; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE: ++ args.mode = VCHIQ_BULK_MODE_BLOCKING; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ case VCHI_FLAGS_NONE: ++ args.mode = VCHIQ_BULK_MODE_NOCALLBACK; ++ break; ++ default: ++ vcos_assert(0); ++ break; ++ } ++ ++ args.handle = service->handle; ++ args.data = data_dst; ++ args.size = data_size; ++ args.userdata = bulk_handle; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_BULK_RECEIVE, &args)); ++ ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_bulk_queue_transmit ++ * ++ * Arguments: VCHI_BULK_HANDLE_T handle, ++ * const void *data_src, ++ * uint32_t data_size, ++ * VCHI_FLAGS_T flags, ++ * void *bulk_handle ++ * ++ * Description: Routine to transmit some data ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_bulk_queue_transmit( VCHI_SERVICE_HANDLE_T handle, ++ const void * data_src, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void * bulk_handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ VCHIQ_QUEUE_BULK_TRANSFER_T args; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ switch ((int)flags) { ++ case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ args.mode = VCHIQ_BULK_MODE_CALLBACK; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_DATA_READ: ++ case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE: ++ args.mode = VCHIQ_BULK_MODE_BLOCKING; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ case VCHI_FLAGS_NONE: ++ args.mode = VCHIQ_BULK_MODE_NOCALLBACK; ++ break; ++ default: ++ vcos_assert(0); ++ break; ++ } ++ ++ args.handle = service->handle; ++ args.data = (void *)data_src; ++ args.size = data_size; ++ args.userdata = bulk_handle; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_BULK_TRANSMIT, &args)); ++ ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_dequeue ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * void *data, ++ * uint32_t max_data_size_to_read, ++ * uint32_t *actual_msg_size ++ * VCHI_FLAGS_T flags ++ * ++ * Description: Routine to dequeue a message into the supplied buffer ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_msg_dequeue( VCHI_SERVICE_HANDLE_T handle, ++ void *data, ++ uint32_t max_data_size_to_read, ++ uint32_t *actual_msg_size, ++ VCHI_FLAGS_T flags ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ VCHIQ_DEQUEUE_MESSAGE_T args; ++ int ret; ++ ++ vcos_assert(flags == VCHI_FLAGS_NONE || flags == VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ if (service->peek_size >= 0) ++ { ++ fprintf(stderr, "vchi_msg_dequeue -> using peek buffer\n"); ++ if ((uint32_t)service->peek_size <= max_data_size_to_read) ++ { ++ memcpy(data, service->peek_buf, service->peek_size); ++ *actual_msg_size = service->peek_size; ++ /* Invalidate the peek data, but retain the buffer */ ++ service->peek_size = -1; ++ ret = 0; ++ } ++ else ++ { ++ ret = -1; ++ } ++ } ++ else ++ { ++ args.handle = service->handle; ++ args.blocking = (flags == VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE); ++ args.bufsize = max_data_size_to_read; ++ args.buf = data; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_DEQUEUE_MESSAGE, &args)); ++ if (ret >= 0) ++ { ++ *actual_msg_size = ret; ++ ret = 0; ++ } ++ } ++ ++ if ((ret < 0) && (errno != EWOULDBLOCK)) ++ fprintf(stderr, "vchi_msg_dequeue -> %d(%d)\n", ret, errno); ++ ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_queuev ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * const void *data, ++ * uint32_t data_size, ++ * VCHI_FLAGS_T flags, ++ * void *msg_handle ++ * ++ * Description: Thin wrapper to queue a message onto a connection ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++ ++vcos_static_assert(sizeof(VCHI_MSG_VECTOR_T) == sizeof(VCHIQ_ELEMENT_T)); ++vcos_static_assert(offsetof(VCHI_MSG_VECTOR_T, vec_base) == offsetof(VCHIQ_ELEMENT_T, data)); ++vcos_static_assert(offsetof(VCHI_MSG_VECTOR_T, vec_len) == offsetof(VCHIQ_ELEMENT_T, size)); ++ ++int32_t ++vchi_msg_queuev( VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MSG_VECTOR_T * vector, ++ uint32_t count, ++ VCHI_FLAGS_T flags, ++ void *msg_handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ VCHIQ_QUEUE_MESSAGE_T args; ++ int ret; ++ ++ vcos_unused(msg_handle); ++ ++ vcos_assert(flags == VCHI_FLAGS_BLOCK_UNTIL_QUEUED); ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ args.handle = service->handle; ++ args.elements = (const VCHIQ_ELEMENT_T *)vector; ++ args.count = count; ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_QUEUE_MESSAGE, &args)); ++ ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_held_msg_release ++ * ++ * Arguments: VCHI_HELD_MSG_T *message ++ * ++ * Description: Routine to release a held message (after it has been read with vchi_msg_hold) ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_held_msg_release( VCHI_HELD_MSG_T *message ) ++{ ++ int ret = -1; ++ ++ if (message && message->message && !message->service) ++ { ++ free_msgbuf(message->message); ++ ret = 0; ++ } ++ ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_hold ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * void **data, ++ * uint32_t *msg_size, ++ * VCHI_FLAGS_T flags, ++ * VCHI_HELD_MSG_T *message_handle ++ * ++ * Description: Routine to return a pointer to the current message (to allow in place processing) ++ * The message is dequeued - don't forget to release the message using ++ * vchi_held_msg_release when you're finished ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_msg_hold( VCHI_SERVICE_HANDLE_T handle, ++ void **data, ++ uint32_t *msg_size, ++ VCHI_FLAGS_T flags, ++ VCHI_HELD_MSG_T *message_handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ ret = fill_peek_buf(service, flags); ++ ++ if (ret == 0) ++ { ++ *data = service->peek_buf; ++ *msg_size = service->peek_size; ++ ++ message_handle->message = service->peek_buf; ++ message_handle->service = NULL; ++ ++ service->peek_size = -1; ++ service->peek_buf = NULL; ++ } ++ ++ return 0; ++} ++ ++/*********************************************************** ++ * Name: vchi_initialise ++ * ++ * Arguments: VCHI_INSTANCE_T *instance_handle ++ * VCHI_CONNECTION_T **connections ++ * const uint32_t num_connections ++ * ++ * Description: Initialises the hardware but does not transmit anything ++ * When run as a Host App this will be called twice hence the need ++ * to malloc the state information ++ * ++ * Returns: 0 if successful, failure otherwise ++ * ++ ***********************************************************/ ++int32_t ++vchi_initialise( VCHI_INSTANCE_T *instance_handle ) ++{ ++ VCHIQ_INSTANCE_T instance; ++ ++ instance = vchiq_lib_init(); ++ ++ vcos_log_trace( "%s: returning instance handle %p", __func__, instance ); ++ ++ *instance_handle = (VCHI_INSTANCE_T)instance; ++ ++ return (instance != NULL) ? 0 : -1; ++} ++ ++/*********************************************************** ++ * Name: vchi_connect ++ * ++ * Arguments: VCHI_CONNECTION_T **connections ++ * const uint32_t num_connections ++ * VCHI_INSTANCE_T instance_handle ) ++ * ++ * Description: Starts the command service on each connection, ++ * causing INIT messages to be pinged back and forth ++ * ++ * Returns: 0 if successful, failure otherwise ++ * ++ ***********************************************************/ ++int32_t ++vchi_connect( VCHI_CONNECTION_T **connections, ++ const uint32_t num_connections, ++ VCHI_INSTANCE_T instance_handle ) ++{ ++ VCHIQ_STATUS_T status; ++ ++ vcos_unused(connections); ++ vcos_unused(num_connections); ++ ++ status = vchiq_connect((VCHIQ_INSTANCE_T)instance_handle); ++ ++ return (status == VCHIQ_SUCCESS) ? 0 : -1; ++} ++ ++ ++/*********************************************************** ++ * Name: vchi_disconnect ++ * ++ * Arguments: VCHI_INSTANCE_T instance_handle ++ * ++ * Description: Stops the command service on each connection, ++ * causing DE-INIT messages to be pinged back and forth ++ * ++ * Returns: 0 if successful, failure otherwise ++ * ++ ***********************************************************/ ++int32_t ++vchi_disconnect( VCHI_INSTANCE_T instance_handle ) ++{ ++ VCHIQ_STATUS_T status; ++ ++ status = vchiq_shutdown((VCHIQ_INSTANCE_T)instance_handle); ++ ++ return (status == VCHIQ_SUCCESS) ? 0 : -1; ++} ++ ++ ++/*********************************************************** ++ * Name: vchi_service_open ++ * Name: vchi_service_create ++ * ++ * Arguments: VCHI_INSTANCE_T *instance_handle ++ * SERVICE_CREATION_T *setup, ++ * VCHI_SERVICE_HANDLE_T *handle ++ * ++ * Description: Routine to open a service ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t ++vchi_service_open( VCHI_INSTANCE_T instance_handle, ++ SERVICE_CREATION_T *setup, ++ VCHI_SERVICE_HANDLE_T *handle ) ++{ ++ VCHIQ_SERVICE_PARAMS_T params; ++ VCHIQ_STATUS_T status; ++ ++ memset(¶ms, 0, sizeof(params)); ++ params.fourcc = setup->service_id; ++ params.userdata = setup->callback_param; ++ ++ status = create_service((VCHIQ_INSTANCE_T)instance_handle, ++ ¶ms, ++ setup->callback, ++ 1/*open*/, ++ (VCHIQ_SERVICE_HANDLE_T *)handle); ++ ++ return (status == VCHIQ_SUCCESS) ? 0 : -1; ++} ++ ++int32_t ++vchi_service_create( VCHI_INSTANCE_T instance_handle, ++ SERVICE_CREATION_T *setup, VCHI_SERVICE_HANDLE_T *handle ) ++{ ++ VCHIQ_SERVICE_PARAMS_T params; ++ VCHIQ_STATUS_T status; ++ ++ memset(¶ms, 0, sizeof(params)); ++ params.fourcc = setup->service_id; ++ params.userdata = setup->callback_param; ++ ++ status = create_service((VCHIQ_INSTANCE_T)instance_handle, ++ ¶ms, ++ setup->callback, ++ 0/*!open*/, ++ (VCHIQ_SERVICE_HANDLE_T *)handle); ++ ++ return (status == VCHIQ_SUCCESS) ? 0 : -1; ++} ++ ++int32_t ++vchi_service_close( const VCHI_SERVICE_HANDLE_T handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_REMOVE_SERVICE, service->handle)); ++ ++ if (ret == 0) ++ service->handle = VCHIQ_INVALID_HANDLE; ++ ++ return ret; ++} ++ ++int32_t ++vchi_service_destroy( const VCHI_SERVICE_HANDLE_T handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_REMOVE_SERVICE, service->handle)); ++ ++ if (ret == 0) ++ service->handle = VCHIQ_INVALID_HANDLE; ++ ++ return ret; ++} ++ ++/* ---------------------------------------------------------------------- ++ * read a uint32_t from buffer. ++ * network format is defined to be little endian ++ * -------------------------------------------------------------------- */ ++uint32_t ++vchi_readbuf_uint32( const void *_ptr ) ++{ ++ const unsigned char *ptr = _ptr; ++ return ptr[0] | (ptr[1] << 8) | (ptr[2] << 16) | (ptr[3] << 24); ++} ++ ++/* ---------------------------------------------------------------------- ++ * write a uint32_t to buffer. ++ * network format is defined to be little endian ++ * -------------------------------------------------------------------- */ ++void ++vchi_writebuf_uint32( void *_ptr, uint32_t value ) ++{ ++ unsigned char *ptr = _ptr; ++ ptr[0] = (unsigned char)((value >> 0) & 0xFF); ++ ptr[1] = (unsigned char)((value >> 8) & 0xFF); ++ ptr[2] = (unsigned char)((value >> 16) & 0xFF); ++ ptr[3] = (unsigned char)((value >> 24) & 0xFF); ++} ++ ++/* ---------------------------------------------------------------------- ++ * read a uint16_t from buffer. ++ * network format is defined to be little endian ++ * -------------------------------------------------------------------- */ ++uint16_t ++vchi_readbuf_uint16( const void *_ptr ) ++{ ++ const unsigned char *ptr = _ptr; ++ return ptr[0] | (ptr[1] << 8); ++} ++ ++/* ---------------------------------------------------------------------- ++ * write a uint16_t into the buffer. ++ * network format is defined to be little endian ++ * -------------------------------------------------------------------- */ ++void ++vchi_writebuf_uint16( void *_ptr, uint16_t value ) ++{ ++ unsigned char *ptr = _ptr; ++ ptr[0] = (value >> 0) & 0xFF; ++ ptr[1] = (value >> 8) & 0xFF; ++} ++ ++/*********************************************************** ++ * Name: vchi_service_use ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle ++ * ++ * Description: Routine to increment refcount on a service ++ * ++ * Returns: void ++ * ++ ***********************************************************/ ++int32_t ++vchi_service_use( const VCHI_SERVICE_HANDLE_T handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_USE_SERVICE, service->handle)); ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_service_release ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle ++ * ++ * Description: Routine to decrement refcount on a service ++ * ++ * Returns: void ++ * ++ ***********************************************************/ ++int32_t vchi_service_release( const VCHI_SERVICE_HANDLE_T handle ) ++{ ++ VCHI_SERVICE_T *service = (VCHI_SERVICE_T *)handle; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_RELEASE_SERVICE, service->handle)); ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchiq_dump_phys_mem ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle ++ * void *buffer ++ * size_t num_bytes ++ * ++ * Description: Dumps the physical memory associated with ++ * a buffer. ++ * ++ * Returns: void ++ * ++ ***********************************************************/ ++VCHIQ_STATUS_T vchiq_dump_phys_mem( VCHIQ_SERVICE_HANDLE_T handle, ++ void *ptr, ++ size_t num_bytes ) ++{ ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)handle; ++ VCHIQ_DUMP_MEM_T dump_mem; ++ int ret; ++ ++ if (!is_valid_service(service)) ++ return VCHIQ_ERROR; ++ ++ dump_mem.virt_addr = ptr; ++ dump_mem.num_bytes = num_bytes; ++ ++ RETRY(ret,ioctl(service->fd, VCHIQ_IOC_DUMP_PHYS_MEM, &dump_mem)); ++ return (ret >= 0) ? VCHIQ_SUCCESS : VCHIQ_ERROR; ++} ++ ++ ++ ++/* ++ * Support functions ++ */ ++ ++static VCHIQ_INSTANCE_T ++vchiq_lib_init(void) ++{ ++ static int mutex_initialised = 0; ++ static VCOS_MUTEX_T vchiq_lib_mutex; ++ VCHIQ_INSTANCE_T instance = &vchiq_instance; ++ ++ vcos_global_lock(); ++ if (!mutex_initialised) ++ { ++ vcos_mutex_create(&vchiq_lib_mutex, "vchiq-init"); ++ ++ vcos_log_set_level( &vchiq_lib_log_category, vchiq_default_lib_log_level ); ++ vcos_log_register( "vchiq_lib", &vchiq_lib_log_category ); ++ ++ mutex_initialised = 1; ++ } ++ vcos_global_unlock(); ++ ++ vcos_mutex_lock(&vchiq_lib_mutex); ++ ++ if (instance->initialised == 0) ++ { ++ instance->fd = open("/dev/vchiq", O_RDWR); ++ if (instance->fd >= 0) ++ { ++ VCHIQ_GET_CONFIG_T args; ++ VCHIQ_CONFIG_T config; ++ int ret; ++ args.config_size = sizeof(config); ++ args.pconfig = &config; ++ RETRY(ret, ioctl(instance->fd, VCHIQ_IOC_GET_CONFIG, &args)); ++ if ((ret == 0) && (config.version >= VCHIQ_VERSION_MIN) && (config.version_min <= VCHIQ_VERSION)) ++ { ++ instance->used_services = 0; ++ vcos_mutex_create(&instance->mutex, "VCHIQ instance"); ++ instance->initialised = 1; ++ } ++ else ++ { ++ if (ret == 0) ++ { ++ vcos_log_error("Incompatible VCHIQ library - driver version %d (min %d), library version %d (min %d)", ++ config.version, config.version_min, VCHIQ_VERSION, VCHIQ_VERSION_MIN); ++ } ++ else ++ { ++ vcos_log_error("Very incompatible VCHIQ library - cannot retrieve driver version"); ++ } ++ close(instance->fd); ++ instance = NULL; ++ } ++ } ++ else ++ { ++ instance = NULL; ++ } ++ } ++ else if (instance->initialised > 0) ++ { ++ instance->initialised++; ++ } ++ ++ vcos_mutex_unlock(&vchiq_lib_mutex); ++ ++ return instance; ++} ++ ++static void * ++completion_thread(void *arg) ++{ ++ VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)arg; ++ VCHIQ_AWAIT_COMPLETION_T args; ++ VCHIQ_COMPLETION_DATA_T completions[8]; ++ void *msgbufs[8]; ++ ++ static const VCHI_CALLBACK_REASON_T vchiq_reason_to_vchi[] = ++ { ++ VCHI_CALLBACK_SERVICE_OPENED, // VCHIQ_SERVICE_OPENED ++ VCHI_CALLBACK_SERVICE_CLOSED, // VCHIQ_SERVICE_CLOSED ++ VCHI_CALLBACK_MSG_AVAILABLE, // VCHIQ_MESSAGE_AVAILABLE ++ VCHI_CALLBACK_BULK_SENT, // VCHIQ_BULK_TRANSMIT_DONE ++ VCHI_CALLBACK_BULK_RECEIVED, // VCHIQ_BULK_RECEIVE_DONE ++ VCHI_CALLBACK_BULK_TRANSMIT_ABORTED, // VCHIQ_BULK_TRANSMIT_ABORTED ++ VCHI_CALLBACK_BULK_RECEIVE_ABORTED, // VCHIQ_BULK_RECEIVE_ABORTED ++ }; ++ ++ args.count = vcos_countof(completions); ++ args.buf = completions; ++ args.msgbufsize = MSGBUF_SIZE; ++ args.msgbufcount = 0; ++ args.msgbufs = msgbufs; ++ ++ while (1) ++ { ++ int ret, i; ++ ++ while ((unsigned int)args.msgbufcount < vcos_countof(msgbufs)) ++ { ++ void *msgbuf = alloc_msgbuf(); ++ if (msgbuf) ++ { ++ msgbufs[args.msgbufcount++] = msgbuf; ++ } ++ else ++ { ++ fprintf(stderr, "vchiq_lib: failed to allocate a message buffer\n"); ++ vcos_demand(args.msgbufcount != 0); ++ } ++ } ++ ++ RETRY(ret, ioctl(instance->fd, VCHIQ_IOC_AWAIT_COMPLETION, &args)); ++ ++ if (ret <= 0) ++ break; ++ ++ for (i = 0; i < ret; i++) ++ { ++ VCHIQ_COMPLETION_DATA_T *completion = &completions[i]; ++ VCHIQ_SERVICE_T *service = (VCHIQ_SERVICE_T *)completion->service_userdata; ++ if (service->base.callback) ++ { ++ vcos_log_trace( "callback(%x, %x, %x, %x)", ++ completion->reason, (uint32_t)completion->header, ++ (uint32_t)&service->base, (uint32_t)completion->bulk_userdata ); ++ service->base.callback(completion->reason, completion->header, ++ &service->base, completion->bulk_userdata); ++ } ++ else if (service->vchi_callback) ++ { ++ VCHI_CALLBACK_REASON_T vchi_reason = ++ vchiq_reason_to_vchi[completion->reason]; ++ service->vchi_callback(service->base.userdata, vchi_reason, completion->bulk_userdata); ++ } ++ } ++ } ++ return NULL; ++} ++ ++static VCHIQ_STATUS_T ++create_service(VCHIQ_INSTANCE_T instance, ++ const VCHIQ_SERVICE_PARAMS_T *params, ++ VCHI_CALLBACK_T vchi_callback, ++ int is_open, ++ VCHIQ_SERVICE_HANDLE_T *pservice) ++{ ++ VCHIQ_SERVICE_T *service = NULL; ++ VCHIQ_STATUS_T status = VCHIQ_SUCCESS; ++ int i; ++ ++ if (!is_valid_instance(instance)) ++ return VCHIQ_ERROR; ++ ++ vcos_mutex_lock(&instance->mutex); ++ ++ /* Find a free service */ ++ if (is_open) ++ { ++ /* Find a free service */ ++ for (i = 0; i < instance->used_services; i++) ++ { ++ if (instance->services[i].handle == VCHIQ_INVALID_HANDLE) ++ { ++ service = &instance->services[i]; ++ break; ++ } ++ } ++ } ++ else ++ { ++ for (i = (instance->used_services - 1); i >= 0; i--) ++ { ++ VCHIQ_SERVICE_T *srv = &instance->services[i]; ++ if (srv->handle == VCHIQ_INVALID_HANDLE) ++ { ++ service = srv; ++ } ++ else if ( ++ (srv->base.fourcc == params->fourcc) && ++ ((srv->base.callback != params->callback) || ++ (srv->vchi_callback != vchi_callback))) ++ { ++ /* There is another server using this fourcc which doesn't match */ ++ service = NULL; ++ status = VCHIQ_ERROR; ++ break; ++ } ++ } ++ } ++ ++ if (!service && (status == VCHIQ_SUCCESS) && ++ (instance->used_services < VCHIQ_MAX_INSTANCE_SERVICES)) ++ service = &instance->services[instance->used_services++]; ++ ++ if (service) ++ { ++ VCHIQ_CREATE_SERVICE_T args; ++ int ret; ++ service->base.fourcc = params->fourcc; ++ service->base.callback = params->callback; ++ service->vchi_callback = vchi_callback; ++ service->base.userdata = params->userdata; ++ service->fd = instance->fd; ++ service->peek_size = -1; ++ service->peek_buf = NULL; ++ ++ args.params = *params; ++ args.params.userdata = service; ++ args.is_open = is_open; ++ args.is_vchi = (params->callback == NULL); ++ args.handle = -1; /* OUT parameter */ ++ RETRY(ret, ioctl(instance->fd, VCHIQ_IOC_CREATE_SERVICE, &args)); ++ if (ret == 0) ++ service->handle = args.handle; ++ else ++ status = VCHIQ_ERROR; ++ } ++ ++ *pservice = (status == VCHIQ_SUCCESS) ? &service->base : NULL; ++ ++ vcos_mutex_unlock(&instance->mutex); ++ ++ return status; ++} ++ ++static int ++fill_peek_buf(VCHI_SERVICE_T *service, ++ VCHI_FLAGS_T flags) ++{ ++ VCHIQ_DEQUEUE_MESSAGE_T args; ++ int ret = 0; ++ ++ vcos_assert(flags == VCHI_FLAGS_NONE || flags == VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE); ++ ++ if (service->peek_size < 0) ++ { ++ if (!service->peek_buf) ++ service->peek_buf = alloc_msgbuf(); ++ ++ if (service->peek_buf) ++ { ++ args.handle = service->handle; ++ args.blocking = (flags == VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE); ++ args.bufsize = MSGBUF_SIZE; ++ args.buf = service->peek_buf; ++ ++ RETRY(ret, ioctl(service->fd, VCHIQ_IOC_DEQUEUE_MESSAGE, &args)); ++ ++ if (ret >= 0) ++ { ++ service->peek_size = ret; ++ ret = 0; ++ } ++ else ++ { ++ ret = -1; ++ } ++ } ++ else ++ { ++ ret = -1; ++ } ++ } ++ ++ return ret; ++} ++ ++ ++static void * ++alloc_msgbuf(void) ++{ ++ void *msgbuf; ++ vcos_mutex_lock(&vchiq_lib_mutex); ++ msgbuf = free_msgbufs; ++ if (msgbuf) ++ free_msgbufs = *(void **)msgbuf; ++ vcos_mutex_unlock(&vchiq_lib_mutex); ++ if (!msgbuf) ++ msgbuf = malloc(MSGBUF_SIZE); ++ return msgbuf; ++} ++ ++static void ++free_msgbuf(void *buf) ++{ ++ vcos_mutex_lock(&vchiq_lib_mutex); ++ *(void **)buf = free_msgbufs; ++ free_msgbufs = buf; ++ vcos_mutex_unlock(&vchiq_lib_mutex); ++} +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,45 @@ ++/***************************************************************************** ++* Copyright 2001 - 2010 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef VCHIQ_MEMDRV_H ++#define VCHIQ_MEMDRV_H ++ ++/* ---- Include Files ----------------------------------------------------- */ ++ ++#include ++#include "vchiq_if.h" ++ ++/* ---- Constants and Types ---------------------------------------------- */ ++ ++typedef struct ++{ ++ void *armSharedMemVirt; ++ dma_addr_t armSharedMemPhys; ++ size_t armSharedMemSize; ++ ++ void *vcSharedMemVirt; ++ dma_addr_t vcSharedMemPhys; ++ size_t vcSharedMemSize; ++ ++} VCHIQ_SHARED_MEM_INFO_T; ++ ++/* ---- Variable Externs ------------------------------------------------- */ ++ ++/* ---- Function Prototypes ---------------------------------------------- */ ++ ++void vchiq_get_shared_mem_info( VCHIQ_SHARED_MEM_INFO_T *info ); ++ ++VCHIQ_STATUS_T vchiq_memdrv_initialise(void); ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,43 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_PAGELIST_H ++#define VCHIQ_PAGELIST_H ++ ++#ifndef PAGE_SIZE ++#define PAGE_SIZE 4096 ++#endif ++#define CACHE_LINE_SIZE 32 ++#define PAGELIST_WRITE 0 ++#define PAGELIST_READ 1 ++#define PAGELIST_READ_WITH_FRAGMENTS 2 ++ ++typedef struct pagelist_struct { ++ unsigned long length; ++ unsigned short type; ++ unsigned short offset; ++ unsigned long addrs[1]; /* N.B. 12 LSBs hold the number of following ++ pages at consecutive addresses. */ ++} PAGELIST_T; ++ ++typedef struct fragments_struct { ++ char headbuf[CACHE_LINE_SIZE]; ++ char tailbuf[CACHE_LINE_SIZE]; ++} FRAGMENTS_T; ++ ++#endif /* VCHIQ_PAGELIST_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,1001 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include "interface/vchi/vchi.h" ++#include "vchiq.h" ++#include "vchiq_core.h" ++ ++#include "vchiq_util.h" ++ ++#include ++ ++#if defined(__KERNEL__) ++#include ++#endif ++ ++#define vchiq_status_to_vchi(status) ((int32_t)status) ++ ++typedef struct { ++ VCHIQ_SERVICE_HANDLE_T handle; ++ ++ VCHIU_QUEUE_T queue; ++ ++ VCHI_CALLBACK_T callback; ++ void *callback_param; ++} SHIM_SERVICE_T; ++ ++/* ---------------------------------------------------------------------- ++ * return pointer to the mphi message driver function table ++ * -------------------------------------------------------------------- */ ++#ifdef WIN32 ++const VCHI_MESSAGE_DRIVER_T * ++mphi_get_func_table( void ) ++{ ++ return NULL; ++} ++#endif ++ ++/* ---------------------------------------------------------------------- ++ * return pointer to the mphi message driver function table ++ * -------------------------------------------------------------------- */ ++const VCHI_MESSAGE_DRIVER_T * ++vchi_mphi_message_driver_func_table( void ) ++{ ++ return NULL; ++} ++ ++/* ---------------------------------------------------------------------- ++ * return a pointer to the 'single' connection driver fops ++ * -------------------------------------------------------------------- */ ++const VCHI_CONNECTION_API_T * ++single_get_func_table( void ) ++{ ++ return NULL; ++} ++ ++VCHI_CONNECTION_T * vchi_create_connection( const VCHI_CONNECTION_API_T * function_table, ++ const VCHI_MESSAGE_DRIVER_T * low_level) ++{ ++ vcos_unused(function_table); ++ vcos_unused(low_level); ++ return NULL; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_peek ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle, ++ * void **data, ++ * uint32_t *msg_size, ++ * VCHI_FLAGS_T flags ++ * ++ * Description: Routine to return a pointer to the current message (to allow in place processing) ++ * The message can be removed using vchi_msg_remove when you're finished ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_msg_peek( VCHI_SERVICE_HANDLE_T handle, ++ void **data, ++ uint32_t *msg_size, ++ VCHI_FLAGS_T flags ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_HEADER_T *header; ++ ++ vcos_assert(flags == VCHI_FLAGS_NONE || flags == VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE); ++ ++ if (flags == VCHI_FLAGS_NONE) ++ if (vchiu_queue_is_empty(&service->queue)) ++ return -1; ++ ++ header = vchiu_queue_peek(&service->queue); ++ ++ *data = header->data; ++ *msg_size = header->size; ++ ++ return 0; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_remove ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle, ++ * ++ * Description: Routine to remove a message (after it has been read with vchi_msg_peek) ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_msg_remove( VCHI_SERVICE_HANDLE_T handle ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_HEADER_T *header; ++ ++ header = vchiu_queue_pop(&service->queue); ++ ++ vchiq_release_message(service->handle, header); ++ ++ return 0; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_queue ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * const void *data, ++ * uint32_t data_size, ++ * VCHI_FLAGS_T flags, ++ * void *msg_handle, ++ * ++ * Description: Thin wrapper to queue a message onto a connection ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_msg_queue( VCHI_SERVICE_HANDLE_T handle, ++ const void * data, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void * msg_handle ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_ELEMENT_T element = {data, data_size}; ++ VCHIQ_STATUS_T status; ++ ++ vcos_unused(msg_handle); ++ ++ vcos_assert(flags == VCHI_FLAGS_BLOCK_UNTIL_QUEUED); ++ ++ status = vchiq_queue_message(service->handle, &element, 1); ++ ++ // On some platforms, like linux kernel, vchiq_queue_message() may return ++ // VCHIQ_RETRY, so we need to implment a retry mechanism since this ++ // function is supposed to block until queued ++ while ( status == VCHIQ_RETRY ) ++ { ++ vcos_sleep( 1 ); ++ status = vchiq_queue_message(service->handle, &element, 1); ++ } ++ ++ return vchiq_status_to_vchi(status); ++} ++ ++/*********************************************************** ++ * Name: vchi_bulk_queue_receive ++ * ++ * Arguments: VCHI_BULK_HANDLE_T handle, ++ * void *data_dst, ++ * const uint32_t data_size, ++ * VCHI_FLAGS_T flags ++ * void *bulk_handle ++ * ++ * Description: Routine to setup a rcv buffer ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_bulk_queue_receive( VCHI_SERVICE_HANDLE_T handle, ++ void * data_dst, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void * bulk_handle ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_BULK_MODE_T mode; ++ VCHIQ_STATUS_T status; ++ ++ switch ((int)flags) { ++ case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ vcos_assert(service->callback); ++ mode = VCHIQ_BULK_MODE_CALLBACK; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE: ++ mode = VCHIQ_BULK_MODE_BLOCKING; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ case VCHI_FLAGS_NONE: ++ mode = VCHIQ_BULK_MODE_NOCALLBACK; ++ break; ++ default: ++ vcos_assert(0); ++ return vchiq_status_to_vchi(VCHIQ_ERROR); ++ } ++ ++ status = vchiq_bulk_receive(service->handle, data_dst, data_size, ++ bulk_handle, mode); ++ ++ // On some platforms, like linux kernel, vchiq_bulk_receive() may return ++ // VCHIQ_RETRY, so we need to implment a retry mechanism since this ++ // function is supposed to block until queued ++ while ( status == VCHIQ_RETRY ) ++ { ++ vcos_sleep( 1 ); ++ status = vchiq_bulk_receive(service->handle, data_dst, data_size, ++ bulk_handle, mode); ++ } ++ ++ return vchiq_status_to_vchi(status); ++} ++ ++/*********************************************************** ++ * Name: vchi_bulk_queue_receive_reloc ++ * ++ * Arguments: VCHI_BULK_HANDLE_T handle, ++ * VCHI_MEM_HANDLE_T h ++ * uint32_t offset ++ * const uint32_t data_size, ++ * VCHI_FLAGS_T flags ++ * void *bulk_handle ++ * ++ * Description: Routine to setup a relocatable rcv buffer ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_bulk_queue_receive_reloc( const VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T h, ++ uint32_t offset, ++ uint32_t data_size, ++ const VCHI_FLAGS_T flags, ++ void * const bulk_handle ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_BULK_MODE_T mode; ++ VCHIQ_STATUS_T status; ++ ++ switch ((int)flags) { ++ case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ vcos_assert(service->callback); ++ mode = VCHIQ_BULK_MODE_CALLBACK; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE: ++ mode = VCHIQ_BULK_MODE_BLOCKING; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ case VCHI_FLAGS_NONE: ++ mode = VCHIQ_BULK_MODE_NOCALLBACK; ++ break; ++ default: ++ vcos_assert(0); ++ return vchiq_status_to_vchi(VCHIQ_ERROR); ++ } ++ ++ status = vchiq_bulk_receive_handle(service->handle, h, (void*)offset, ++ data_size, bulk_handle, mode); ++ ++ // On some platforms, like linux kernel, vchiq_bulk_receive_handle() may ++ // return VCHIQ_RETRY, so we need to implment a retry mechanism since ++ // this function is supposed to block until queued ++ while ( status == VCHIQ_RETRY ) ++ { ++ vcos_sleep( 1 ); ++ status = vchiq_bulk_receive_handle(service->handle, h, (void*)offset, ++ data_size, bulk_handle, mode); ++ } ++ ++ return vchiq_status_to_vchi(status); ++} ++ ++/*********************************************************** ++ * Name: vchi_bulk_queue_transmit ++ * ++ * Arguments: VCHI_BULK_HANDLE_T handle, ++ * const void *data_src, ++ * uint32_t data_size, ++ * VCHI_FLAGS_T flags, ++ * void *bulk_handle ++ * ++ * Description: Routine to transmit some data ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_bulk_queue_transmit( VCHI_SERVICE_HANDLE_T handle, ++ const void * data_src, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void * bulk_handle ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_BULK_MODE_T mode; ++ VCHIQ_STATUS_T status; ++ ++ switch ((int)flags) { ++ case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ vcos_assert(service->callback); ++ mode = VCHIQ_BULK_MODE_CALLBACK; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_DATA_READ: ++ case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE: ++ mode = VCHIQ_BULK_MODE_BLOCKING; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ case VCHI_FLAGS_NONE: ++ mode = VCHIQ_BULK_MODE_NOCALLBACK; ++ break; ++ default: ++ vcos_assert(0); ++ return vchiq_status_to_vchi(VCHIQ_ERROR); ++ } ++ ++ status = vchiq_bulk_transmit(service->handle, data_src, data_size, ++ bulk_handle, mode); ++ ++ // On some platforms, like linux kernel, vchiq_bulk_transmit() may return ++ // VCHIQ_RETRY, so we need to implment a retry mechanism since this ++ // function is supposed to block until queued ++ while ( status == VCHIQ_RETRY ) ++ { ++ vcos_sleep( 1 ); ++ status = vchiq_bulk_transmit(service->handle, data_src, data_size, ++ bulk_handle, mode); ++ } ++ ++ return vchiq_status_to_vchi(status); ++} ++ ++/*********************************************************** ++ * Name: vchi_bulk_queue_transmit_reloc ++ * ++ * Arguments: VCHI_BULK_HANDLE_T handle, ++ * VCHI_MEM_HANDLE_T h_src, ++ * uint32_t offset, ++ * uint32_t data_size, ++ * VCHI_FLAGS_T flags, ++ * void *bulk_handle ++ * ++ * Description: Routine to transmit some data from a relocatable buffer ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++ ++int32_t vchi_bulk_queue_transmit_reloc( VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MEM_HANDLE_T h_src, ++ uint32_t offset, ++ uint32_t data_size, ++ VCHI_FLAGS_T flags, ++ void * const bulk_handle ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_BULK_MODE_T mode; ++ VCHIQ_STATUS_T status; ++ ++ switch ((int)flags) { ++ case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ vcos_assert(service->callback); ++ mode = VCHIQ_BULK_MODE_CALLBACK; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_DATA_READ: ++ case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE: ++ mode = VCHIQ_BULK_MODE_BLOCKING; ++ break; ++ case VCHI_FLAGS_BLOCK_UNTIL_QUEUED: ++ case VCHI_FLAGS_NONE: ++ mode = VCHIQ_BULK_MODE_NOCALLBACK; ++ break; ++ default: ++ vcos_assert(0); ++ return vchiq_status_to_vchi(VCHIQ_ERROR); ++ } ++ ++ status = vchiq_bulk_transmit_handle(service->handle, h_src, (void*)offset, ++ data_size, bulk_handle, mode); ++ ++ // On some platforms, like linux kernel, vchiq_bulk_transmit_handle() may ++ // return VCHIQ_RETRY, so we need to implment a retry mechanism since this ++ // function is supposed to block until queued ++ while ( status == VCHIQ_RETRY ) ++ { ++ vcos_sleep( 1 ); ++ status = vchiq_bulk_transmit_handle(service->handle, h_src, (void*)offset, ++ data_size, bulk_handle, mode); ++ } ++ ++ return vchiq_status_to_vchi(status); ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_dequeue ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * void *data, ++ * uint32_t max_data_size_to_read, ++ * uint32_t *actual_msg_size ++ * VCHI_FLAGS_T flags ++ * ++ * Description: Routine to dequeue a message into the supplied buffer ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_msg_dequeue( VCHI_SERVICE_HANDLE_T handle, ++ void *data, ++ uint32_t max_data_size_to_read, ++ uint32_t *actual_msg_size, ++ VCHI_FLAGS_T flags ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_HEADER_T *header; ++ ++ vcos_assert(flags == VCHI_FLAGS_NONE || flags == VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE); ++ ++ if (flags == VCHI_FLAGS_NONE) ++ if (vchiu_queue_is_empty(&service->queue)) ++ return -1; ++ ++ header = vchiu_queue_pop(&service->queue); ++ ++ memcpy(data, header->data, header->size < max_data_size_to_read ? header->size : max_data_size_to_read); ++ ++ *actual_msg_size = header->size; ++ ++ vchiq_release_message(service->handle, header); ++ ++ return 0; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_queuev ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * const void *data, ++ * uint32_t data_size, ++ * VCHI_FLAGS_T flags, ++ * void *msg_handle ++ * ++ * Description: Thin wrapper to queue a message onto a connection ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++ ++vcos_static_assert(sizeof(VCHI_MSG_VECTOR_T) == sizeof(VCHIQ_ELEMENT_T)); ++vcos_static_assert(offsetof(VCHI_MSG_VECTOR_T, vec_base) == offsetof(VCHIQ_ELEMENT_T, data)); ++vcos_static_assert(offsetof(VCHI_MSG_VECTOR_T, vec_len) == offsetof(VCHIQ_ELEMENT_T, size)); ++ ++int32_t vchi_msg_queuev( VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MSG_VECTOR_T * vector, ++ uint32_t count, ++ VCHI_FLAGS_T flags, ++ void *msg_handle ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ ++ vcos_unused(msg_handle); ++ ++ vcos_assert(flags == VCHI_FLAGS_BLOCK_UNTIL_QUEUED); ++ ++ return vchiq_status_to_vchi(vchiq_queue_message(service->handle, (const VCHIQ_ELEMENT_T *)vector, count)); ++} ++ ++#ifdef USE_MEMMGR ++ ++/*********************************************************** ++ * Name: vchi_msg_queuev_ex ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * VCHI_MSG_VECTOR_EX_T *vector ++ * uint32_t count ++ * VCHI_FLAGS_T flags, ++ * void *msg_handle ++ * ++ * Description: Thin wrapper to queue an array of messages onto a connection ++ * Supports resolving MEM_HANDLE's at last possible moment to avoid deadlocks. ++ * ++ * Currently just a shim, so deadlocks are still possible! ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_msg_queuev_ex( const VCHI_SERVICE_HANDLE_T handle, ++ VCHI_MSG_VECTOR_EX_T * const vector, ++ const uint32_t count, ++ const VCHI_FLAGS_T flags, ++ void * const msg_handle ) ++{ ++ int32_t success = -1; ++ // For now, we don't actually support sending anything other than ++ // a pointer, so handles have to be patched up; this is likely ++ // to cause deadlocks. This code is not designed to be either ++ // pretty, efficient, or deadlock-free. ++ ++ #define max_vecs 16 ++ VCHI_MSG_VECTOR_T copy[max_vecs]; ++ const uint8_t *orig[max_vecs]; ++ ++ int i; ++ vcos_unused(msg_handle); ++ ++ if (count > sizeof(copy)/sizeof(copy[0])) ++ { ++ vcos_assert(0); ++ return -1; ++ } ++ ++ for (i=0; iu.ptr.vec_base; ++ copy[i].vec_len = v->u.ptr.vec_len; ++ break; ++ case VCHI_VEC_HANDLE: ++ vcos_assert(v->u.handle.offset+v->u.handle.vec_len <= mem_get_size(v->u.handle.handle)); ++ copy[i].vec_base = (uint8_t*)mem_lock(v->u.handle.handle) + v->u.handle.offset; ++ orig[i] = copy[i].vec_base; ++ copy[i].vec_len = v->u.handle.vec_len; ++ break; ++ case VCHI_VEC_LIST: ++ vcos_assert(0); // FIXME: implement this ++ break; ++ default: ++ vcos_assert(0); ++ } ++ } ++ success = vchi_msg_queuev( handle, ++ copy, ++ count, ++ flags &~ VCHI_FLAGS_INTERNAL, ++ msg_handle ); ++ if (vcos_verify(success == 0)) ++ { ++ // now we need to patch up the vectors if any have been only partially consumed, and ++ // unlock memory handles. ++ ++ for (i=0; iu.ptr.vec_base = copy[i].vec_base; ++ v->u.ptr.vec_len = copy[i].vec_len; ++ } ++ break; ++ case VCHI_VEC_HANDLE: ++ mem_unlock(v->u.handle.handle); ++ if (flags & VCHI_FLAGS_ALLOW_PARTIAL) ++ { ++ const uint8_t *old = orig[i]; ++ uint32_t change = (const uint8_t*)copy[i].vec_base-old; ++ v->u.handle.offset += change; ++ v->u.handle.vec_len -= change; ++ } ++ break; ++ default: ++ vcos_assert(0); ++ } ++ } ++ } ++ ++ return vchiq_status_to_vchi(success); ++} ++ ++#endif ++ ++/*********************************************************** ++ * Name: vchi_held_msg_release ++ * ++ * Arguments: VCHI_HELD_MSG_T *message ++ * ++ * Description: Routine to release a held message (after it has been read with vchi_msg_hold) ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_held_msg_release( VCHI_HELD_MSG_T *message ) ++{ ++ vchiq_release_message((VCHIQ_SERVICE_HANDLE_T)message->service, (VCHIQ_HEADER_T *)message->message); ++ ++ return 0; ++} ++ ++/*********************************************************** ++ * Name: vchi_msg_hold ++ * ++ * Arguments: VCHI_SERVICE_HANDLE_T handle, ++ * void **data, ++ * uint32_t *msg_size, ++ * VCHI_FLAGS_T flags, ++ * VCHI_HELD_MSG_T *message_handle ++ * ++ * Description: Routine to return a pointer to the current message (to allow in place processing) ++ * The message is dequeued - don't forget to release the message using ++ * vchi_held_msg_release when you're finished ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++int32_t vchi_msg_hold( VCHI_SERVICE_HANDLE_T handle, ++ void **data, ++ uint32_t *msg_size, ++ VCHI_FLAGS_T flags, ++ VCHI_HELD_MSG_T *message_handle ) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ VCHIQ_HEADER_T *header; ++ ++ vcos_assert(flags == VCHI_FLAGS_NONE || flags == VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE); ++ ++ if (flags == VCHI_FLAGS_NONE) ++ if (vchiu_queue_is_empty(&service->queue)) ++ return -1; ++ ++ header = vchiu_queue_pop(&service->queue); ++ ++ *data = header->data; ++ *msg_size = header->size; ++ ++ message_handle->service = (struct opaque_vchi_service_t *)service->handle; ++ message_handle->message = header; ++ ++ return 0; ++} ++ ++/*********************************************************** ++ * Name: vchi_initialise ++ * ++ * Arguments: VCHI_INSTANCE_T *instance_handle ++ * VCHI_CONNECTION_T **connections ++ * const uint32_t num_connections ++ * ++ * Description: Initialises the hardware but does not transmit anything ++ * When run as a Host App this will be called twice hence the need ++ * to malloc the state information ++ * ++ * Returns: 0 if successful, failure otherwise ++ * ++ ***********************************************************/ ++ ++int32_t vchi_initialise( VCHI_INSTANCE_T *instance_handle ) ++{ ++ VCHIQ_INSTANCE_T instance; ++ VCHIQ_STATUS_T status; ++ ++ status = vchiq_initialise(&instance); ++ ++ *instance_handle = (VCHI_INSTANCE_T)instance; ++ ++ return vchiq_status_to_vchi(status); ++} ++ ++/*********************************************************** ++ * Name: vchi_connect ++ * ++ * Arguments: VCHI_CONNECTION_T **connections ++ * const uint32_t num_connections ++ * VCHI_INSTANCE_T instance_handle ) ++ * ++ * Description: Starts the command service on each connection, ++ * causing INIT messages to be pinged back and forth ++ * ++ * Returns: 0 if successful, failure otherwise ++ * ++ ***********************************************************/ ++int32_t vchi_connect( VCHI_CONNECTION_T **connections, ++ const uint32_t num_connections, ++ VCHI_INSTANCE_T instance_handle ) ++{ ++ VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle; ++ ++ vcos_unused(connections); ++ vcos_unused(num_connections); ++ ++ return vchiq_connect(instance); ++} ++ ++ ++/*********************************************************** ++ * Name: vchi_disconnect ++ * ++ * Arguments: VCHI_INSTANCE_T instance_handle ++ * ++ * Description: Stops the command service on each connection, ++ * causing DE-INIT messages to be pinged back and forth ++ * ++ * Returns: 0 if successful, failure otherwise ++ * ++ ***********************************************************/ ++int32_t vchi_disconnect( VCHI_INSTANCE_T instance_handle ) ++{ ++ VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle; ++ return vchiq_status_to_vchi(vchiq_shutdown(instance)); ++} ++ ++ ++/*********************************************************** ++ * Name: vchi_service_open ++ * Name: vchi_service_create ++ * ++ * Arguments: VCHI_INSTANCE_T *instance_handle ++ * SERVICE_CREATION_T *setup, ++ * VCHI_SERVICE_HANDLE_T *handle ++ * ++ * Description: Routine to open a service ++ * ++ * Returns: int32_t - success == 0 ++ * ++ ***********************************************************/ ++ ++static VCHIQ_STATUS_T shim_callback(VCHIQ_REASON_T reason, VCHIQ_HEADER_T *header, VCHIQ_SERVICE_HANDLE_T handle, void *bulk_user) ++{ ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)VCHIQ_GET_SERVICE_USERDATA(handle); ++ ++ switch (reason) { ++ case VCHIQ_MESSAGE_AVAILABLE: ++ vchiu_queue_push(&service->queue, header); ++ ++ if (service->callback) ++ service->callback(service->callback_param, VCHI_CALLBACK_MSG_AVAILABLE, NULL); ++ break; ++ case VCHIQ_BULK_TRANSMIT_DONE: ++ if (service->callback) ++ service->callback(service->callback_param, VCHI_CALLBACK_BULK_SENT, bulk_user); ++ break; ++ case VCHIQ_BULK_RECEIVE_DONE: ++ if (service->callback) ++ service->callback(service->callback_param, VCHI_CALLBACK_BULK_RECEIVED, bulk_user); ++ break; ++ case VCHIQ_SERVICE_CLOSED: ++ if (service->callback) ++ service->callback(service->callback_param, VCHI_CALLBACK_SERVICE_CLOSED, NULL); ++ break; ++ case VCHIQ_SERVICE_OPENED: ++ /* No equivalent VCHI reason */ ++ break; ++ case VCHIQ_BULK_TRANSMIT_ABORTED: ++ if (service->callback) ++ service->callback(service->callback_param, VCHI_CALLBACK_BULK_TRANSMIT_ABORTED, bulk_user); ++ break; ++ case VCHIQ_BULK_RECEIVE_ABORTED: ++ if (service->callback) ++ service->callback(service->callback_param, VCHI_CALLBACK_BULK_RECEIVE_ABORTED, bulk_user); ++ break; ++ default: ++ vcos_assert(0); ++ break; ++ } ++ ++ return VCHIQ_SUCCESS; ++} ++ ++static SHIM_SERVICE_T *service_alloc(VCHIQ_INSTANCE_T instance, ++ SERVICE_CREATION_T *setup) ++{ ++ SHIM_SERVICE_T *service = vcos_calloc(1, sizeof(SHIM_SERVICE_T), "vchiq_shim"); ++ ++ vcos_unused(instance); ++ ++ if (service) ++ { ++ if (vchiu_queue_init(&service->queue, 64)) ++ { ++ service->callback = setup->callback; ++ service->callback_param = setup->callback_param; ++ } ++ else ++ { ++ vcos_free(service); ++ service = NULL; ++ } ++ } ++ ++ return service; ++} ++ ++static void service_free(SHIM_SERVICE_T *service) ++{ ++ if (service) ++ { ++ vchiu_queue_delete(&service->queue); ++ vcos_free((void*)service); ++ } ++} ++ ++int32_t vchi_service_open( VCHI_INSTANCE_T instance_handle, ++ SERVICE_CREATION_T *setup, ++ VCHI_SERVICE_HANDLE_T *handle) ++{ ++ VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle; ++ SHIM_SERVICE_T *service = service_alloc(instance, setup); ++ if (service) ++ { ++ VCHIQ_STATUS_T status = vchiq_open_service(instance, setup->service_id, shim_callback, service, &service->handle); ++ if (status != VCHIQ_SUCCESS) ++ { ++ service_free(service); ++ service = NULL; ++ } ++ } ++ ++ *handle = (VCHI_SERVICE_HANDLE_T)service; ++ ++ return (service != NULL) ? 0 : -1; ++} ++ ++int32_t vchi_service_create( VCHI_INSTANCE_T instance_handle, ++ SERVICE_CREATION_T *setup, ++ VCHI_SERVICE_HANDLE_T *handle ) ++{ ++ VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle; ++ SHIM_SERVICE_T *service = service_alloc(instance, setup); ++ if (service) ++ { ++ VCHIQ_STATUS_T status = vchiq_add_service(instance, setup->service_id, shim_callback, service, &service->handle); ++ if (status != VCHIQ_SUCCESS) ++ { ++ service_free(service); ++ service = NULL; ++ } ++ } ++ ++ *handle = (VCHI_SERVICE_HANDLE_T)service; ++ ++ return (service != NULL) ? 0 : -1; ++} ++ ++int32_t vchi_service_close( const VCHI_SERVICE_HANDLE_T handle ) ++{ ++ int32_t ret = -1; ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ if(service) ++ { ++ VCHIQ_STATUS_T status = vchiq_close_service(service->handle); ++ if (status == VCHIQ_SUCCESS) ++ { ++ service_free(service); ++ service = NULL; ++ } ++ ++ ret = vchiq_status_to_vchi( status ); ++ } ++ return ret; ++} ++ ++int32_t vchi_service_destroy( const VCHI_SERVICE_HANDLE_T handle ) ++{ ++ int32_t ret = -1; ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ if(service) ++ { ++ VCHIQ_STATUS_T status = vchiq_remove_service(service->handle); ++ if (status == VCHIQ_SUCCESS) ++ { ++ service_free(service); ++ service = NULL; ++ } ++ ++ ret = vchiq_status_to_vchi( status ); ++ } ++ return ret; ++} ++ ++/* ---------------------------------------------------------------------- ++ * read a uint32_t from buffer. ++ * network format is defined to be little endian ++ * -------------------------------------------------------------------- */ ++uint32_t ++vchi_readbuf_uint32( const void *_ptr ) ++{ ++ const unsigned char *ptr = _ptr; ++ return ptr[0] | (ptr[1] << 8) | (ptr[2] << 16) | (ptr[3] << 24); ++} ++ ++/* ---------------------------------------------------------------------- ++ * write a uint32_t to buffer. ++ * network format is defined to be little endian ++ * -------------------------------------------------------------------- */ ++void ++vchi_writebuf_uint32( void *_ptr, uint32_t value ) ++{ ++ unsigned char *ptr = _ptr; ++ ptr[0] = (unsigned char)((value >> 0) & 0xFF); ++ ptr[1] = (unsigned char)((value >> 8) & 0xFF); ++ ptr[2] = (unsigned char)((value >> 16) & 0xFF); ++ ptr[3] = (unsigned char)((value >> 24) & 0xFF); ++} ++ ++/* ---------------------------------------------------------------------- ++ * read a uint16_t from buffer. ++ * network format is defined to be little endian ++ * -------------------------------------------------------------------- */ ++uint16_t ++vchi_readbuf_uint16( const void *_ptr ) ++{ ++ const unsigned char *ptr = _ptr; ++ return ptr[0] | (ptr[1] << 8); ++} ++ ++/* ---------------------------------------------------------------------- ++ * write a uint16_t into the buffer. ++ * network format is defined to be little endian ++ * -------------------------------------------------------------------- */ ++void ++vchi_writebuf_uint16( void *_ptr, uint16_t value ) ++{ ++ unsigned char *ptr = _ptr; ++ ptr[0] = (value >> 0) & 0xFF; ++ ptr[1] = (value >> 8) & 0xFF; ++} ++ ++/*********************************************************** ++ * Name: vchi_service_use ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle ++ * ++ * Description: Routine to increment refcount on a service ++ * ++ * Returns: void ++ * ++ ***********************************************************/ ++int32_t vchi_service_use( const VCHI_SERVICE_HANDLE_T handle ) ++{ ++ int32_t ret = -1; ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ if(service) ++ { ++ ret = vchiq_status_to_vchi(vchiq_use_service(service->handle)); ++ } ++ return ret; ++} ++ ++/*********************************************************** ++ * Name: vchi_service_release ++ * ++ * Arguments: const VCHI_SERVICE_HANDLE_T handle ++ * ++ * Description: Routine to decrement refcount on a service ++ * ++ * Returns: void ++ * ++ ***********************************************************/ ++int32_t vchi_service_release( const VCHI_SERVICE_HANDLE_T handle ) ++{ ++ int32_t ret = -1; ++ SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle; ++ if(service) ++ { ++ ret = vchiq_status_to_vchi(vchiq_release_service(service->handle)); ++ } ++ return ret; ++} ++ ++#if defined(__KERNEL__) ++EXPORT_SYMBOL(vchi_initialise); ++EXPORT_SYMBOL(vchi_connect); ++EXPORT_SYMBOL(vchi_bulk_queue_transmit); ++EXPORT_SYMBOL(vchi_msg_dequeue); ++EXPORT_SYMBOL(vchi_msg_queue); ++EXPORT_SYMBOL(vchi_msg_queuev); ++EXPORT_SYMBOL(vchi_msg_peek); ++EXPORT_SYMBOL(vchi_msg_remove); ++EXPORT_SYMBOL(vchi_service_close); ++EXPORT_SYMBOL(vchi_service_open); ++EXPORT_SYMBOL(vchi_service_create); ++EXPORT_SYMBOL(vchi_service_destroy); ++EXPORT_SYMBOL(vchi_service_use); ++EXPORT_SYMBOL(vchi_service_release); ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,97 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include "vchiq_util.h" ++ ++#if !defined(__KERNEL__) ++#include ++#endif ++ ++static __inline int is_pow2(int i) ++{ ++ return i && !(i & (i - 1)); ++} ++ ++int vchiu_queue_init(VCHIU_QUEUE_T *queue, int size) ++{ ++ vcos_assert(is_pow2(size)); ++ ++ queue->size = size; ++ queue->read = 0; ++ queue->write = 0; ++ ++ vcos_event_create(&queue->pop, "vchiu"); ++ vcos_event_create(&queue->push, "vchiu"); ++ ++ queue->storage = vcos_malloc(size * sizeof(VCHIQ_HEADER_T *), VCOS_FUNCTION); ++ if (queue->storage == NULL) ++ { ++ vchiu_queue_delete(queue); ++ return 0; ++ } ++ return 1; ++} ++ ++void vchiu_queue_delete(VCHIU_QUEUE_T *queue) ++{ ++ vcos_event_delete(&queue->pop); ++ vcos_event_delete(&queue->push); ++ if (queue->storage != NULL) ++ vcos_free(queue->storage); ++} ++ ++int vchiu_queue_is_empty(VCHIU_QUEUE_T *queue) ++{ ++ return queue->read == queue->write; ++} ++ ++void vchiu_queue_push(VCHIU_QUEUE_T *queue, VCHIQ_HEADER_T *header) ++{ ++ while (queue->write == queue->read + queue->size) ++ vcos_event_wait(&queue->pop); ++ ++ queue->storage[queue->write & (queue->size - 1)] = header; ++ ++ queue->write++; ++ ++ vcos_event_signal(&queue->push); ++} ++ ++VCHIQ_HEADER_T *vchiu_queue_peek(VCHIU_QUEUE_T *queue) ++{ ++ while (queue->write == queue->read) ++ vcos_event_wait(&queue->push); ++ ++ return queue->storage[queue->read & (queue->size - 1)]; ++} ++ ++VCHIQ_HEADER_T *vchiu_queue_pop(VCHIU_QUEUE_T *queue) ++{ ++ VCHIQ_HEADER_T *header; ++ ++ while (queue->write == queue->read) ++ vcos_event_wait(&queue->push); ++ ++ header = queue->storage[queue->read & (queue->size - 1)]; ++ ++ queue->read++; ++ ++ vcos_event_signal(&queue->pop); ++ ++ return header; ++} +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,47 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCHIQ_UTIL_H ++#define VCHIQ_UTIL_H ++ ++#include "vchiq_if.h" ++#include "interface/vcos/vcos.h" ++ ++typedef struct { ++ int size; ++ int read; ++ int write; ++ ++ VCOS_EVENT_T pop; ++ VCOS_EVENT_T push; ++ ++ VCHIQ_HEADER_T **storage; ++} VCHIU_QUEUE_T; ++ ++extern int vchiu_queue_init(VCHIU_QUEUE_T *queue, int size); ++extern void vchiu_queue_delete(VCHIU_QUEUE_T *queue); ++ ++extern int vchiu_queue_is_empty(VCHIU_QUEUE_T *queue); ++ ++extern void vchiu_queue_push(VCHIU_QUEUE_T *queue, VCHIQ_HEADER_T *header); ++ ++extern VCHIQ_HEADER_T *vchiu_queue_peek(VCHIU_QUEUE_T *queue); ++extern VCHIQ_HEADER_T *vchiu_queue_pop(VCHIU_QUEUE_T *queue); ++ ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_cmd.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_cmd.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_cmd.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_cmd.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,681 @@ ++/***************************************************************************** ++* Copyright 2009 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/***************************************************************************** ++* ++* This file provides a generic command line interface which allows ++* vcos internals to be manipulated and/or displayed. ++* ++*****************************************************************************/ ++ ++/* ---- Include Files ---------------------------------------------------- */ ++ ++#include "interface/vcos/vcos.h" ++ ++#ifdef HAVE_VCOS_VERSION ++#include "interface/vcos/vcos_build_info.h" ++#endif ++ ++ #ifdef _VIDEOCORE ++#include vcfw/logging/logging.h ++#endif ++ ++/* ---- Public Variables ------------------------------------------------- */ ++ ++/* ---- Private Constants and Types -------------------------------------- */ ++ ++#define VCOS_LOG_CATEGORY (&vcos_cmd_log_category) ++VCOS_LOG_CAT_T vcos_cmd_log_category; ++ ++/* ---- Private Variables ------------------------------------------------ */ ++ ++static struct VCOS_CMD_GLOBALS_T ++{ ++ VCOS_MUTEX_T lock; ++ VCOS_ONCE_T initialized; ++ ++ unsigned num_cmd_entries; ++ unsigned num_cmd_alloc; ++ VCOS_CMD_T *cmd_entry; ++ ++ VCOS_LOG_CAT_T *log_category; ++} cmd_globals; ++ ++/* ---- Private Function Prototypes -------------------------------------- */ ++ ++static VCOS_STATUS_T help_cmd( VCOS_CMD_PARAM_T *param ); ++ ++/* ---- Functions ------------------------------------------------------- */ ++ ++/***************************************************************************** ++* ++* Walks through the commands looking for a particular command ++* ++*****************************************************************************/ ++ ++static VCOS_CMD_T *find_cmd( VCOS_CMD_T *cmd_entry, const char *name ) ++{ ++ VCOS_CMD_T *scan_entry = cmd_entry; ++ ++ while ( scan_entry->name != NULL ) ++ { ++ if ( vcos_strcmp( scan_entry->name, name ) == 0 ) ++ { ++ return scan_entry; ++ } ++ scan_entry++; ++ } ++ ++ return NULL; ++} ++ ++/***************************************************************************** ++* ++* Saves away ++* each line individually. ++* ++*****************************************************************************/ ++ ++void vcos_cmd_always_log_output( VCOS_LOG_CAT_T *log_category ) ++{ ++ cmd_globals.log_category = log_category; ++} ++ ++/***************************************************************************** ++* ++* Walks through a buffer containing newline separated lines, and logs ++* each line individually. ++* ++*****************************************************************************/ ++ ++static void cmd_log_results( VCOS_CMD_PARAM_T *param ) ++{ ++ char *start; ++ char *end; ++ ++ start = end = param->result_buf; ++ ++ while ( *start != '\0' ) ++ { ++ while (( *end != '\0' ) && ( *end != '\n' )) ++ end++; ++ ++ if ( *end == '\n' ) ++ { ++ *end++ = '\0'; ++ } ++ ++ if ( cmd_globals.log_category != NULL ) ++ { ++ if ( vcos_is_log_enabled( cmd_globals.log_category, VCOS_LOG_INFO )) ++ { ++ vcos_log_impl( cmd_globals.log_category, VCOS_LOG_INFO, "%s", start ); ++ } ++ } ++ else ++ { ++ vcos_log_info( "%s", start ); ++ } ++ ++ start = end; ++ } ++ ++ /* Since we logged the buffer, reset the pointer back to the beginning. */ ++ ++ param->result_ptr = param->result_buf; ++ param->result_buf[0] = '\0'; ++} ++ ++/***************************************************************************** ++* ++* Since we may have limited output space, we create a generic routine ++* which tries to use the result space, but will switch over to using ++* logging if the output is too large. ++* ++*****************************************************************************/ ++ ++void vcos_cmd_vprintf( VCOS_CMD_PARAM_T *param, const char *fmt, va_list args ) ++{ ++ int bytes_written; ++ int bytes_remaining; ++ ++ bytes_remaining = (int)(param->result_size - ( param->result_ptr - param->result_buf )); ++ ++ bytes_written = vcos_vsnprintf( param->result_ptr, bytes_remaining, fmt, args ); ++ ++ if ( cmd_globals.log_category != NULL ) ++ { ++ /* We're going to log each line as we encounter it. If the buffer ++ * doesn't end in a newline, then we'll wait for one first. ++ */ ++ ++ if ( (( bytes_written + 1 ) >= bytes_remaining ) ++ || ( param->result_ptr[ bytes_written - 1 ] == '\n' )) ++ { ++ cmd_log_results( param ); ++ } ++ else ++ { ++ param->result_ptr += bytes_written; ++ } ++ } ++ else ++ { ++ if (( bytes_written + 1 ) >= bytes_remaining ) ++ { ++ /* Output doesn't fit - switch over to logging */ ++ ++ param->use_log = 1; ++ ++ *param->result_ptr = '\0'; /* Zap the partial line that didn't fit above. */ ++ ++ cmd_log_results( param ); /* resets result_ptr */ ++ ++ bytes_written = vcos_vsnprintf( param->result_ptr, bytes_remaining, fmt, args ); ++ } ++ param->result_ptr += bytes_written; ++ } ++} ++ ++/***************************************************************************** ++* ++* Prints the output. ++* ++*****************************************************************************/ ++ ++void vcos_cmd_printf( VCOS_CMD_PARAM_T *param, const char *fmt, ... ) ++{ ++ va_list args; ++ ++ va_start( args, fmt ); ++ vcos_cmd_vprintf( param, fmt, args ); ++ va_end( args ); ++} ++ ++/***************************************************************************** ++* ++* Prints the arguments which were on the command line prior to ours. ++* ++*****************************************************************************/ ++ ++static void print_argument_prefix( VCOS_CMD_PARAM_T *param ) ++{ ++ int arg_idx; ++ ++ for ( arg_idx = 0; ¶m->argv_orig[arg_idx] != param->argv; arg_idx++ ) ++ { ++ vcos_cmd_printf( param, "%s ", param->argv_orig[arg_idx] ); ++ } ++} ++ ++/***************************************************************************** ++* ++* Prints an error message, prefixed by the command chain required to get ++* to where we're at. ++* ++*****************************************************************************/ ++ ++void vcos_cmd_error( VCOS_CMD_PARAM_T *param, const char *fmt, ... ) ++{ ++ va_list args; ++ ++ print_argument_prefix( param ); ++ ++ va_start( args, fmt ); ++ vcos_cmd_vprintf( param, fmt, args ); ++ va_end( args ); ++ vcos_cmd_printf( param, "\n" ); ++} ++ ++/**************************************************************************** ++* ++* usage - prints command usage for an array of commands. ++* ++***************************************************************************/ ++ ++static void usage( VCOS_CMD_PARAM_T *param, VCOS_CMD_T *cmd_entry ) ++{ ++ int cmd_idx; ++ int nameWidth = 0; ++ int argsWidth = 0; ++ VCOS_CMD_T *scan_entry; ++ ++ vcos_cmd_printf( param, "Usage: " ); ++ print_argument_prefix( param ); ++ vcos_cmd_printf( param, "command [args ...]\n" ); ++ vcos_cmd_printf( param, "\n" ); ++ vcos_cmd_printf( param, "Where command is one of the following:\n" ); ++ ++ for ( cmd_idx = 0; cmd_entry[cmd_idx].name != NULL; cmd_idx++ ) ++ { ++ int aw; ++ int nw; ++ ++ scan_entry = &cmd_entry[cmd_idx]; ++ ++ nw = vcos_strlen( scan_entry->name ); ++ aw = vcos_strlen( scan_entry->args ); ++ ++ if ( nw > nameWidth ) ++ { ++ nameWidth = nw; ++ } ++ if ( aw > argsWidth ) ++ { ++ argsWidth = aw; ++ } ++ } ++ ++ for ( cmd_idx = 0; cmd_entry[cmd_idx].name != NULL; cmd_idx++ ) ++ { ++ scan_entry = &cmd_entry[cmd_idx]; ++ ++ vcos_cmd_printf( param, " %-*s %-*s - %s\n", ++ nameWidth, scan_entry->name, ++ argsWidth, scan_entry->args, ++ scan_entry->descr ); ++ } ++} ++ ++/**************************************************************************** ++* ++* Prints the usage for the current command. ++* ++***************************************************************************/ ++ ++void vcos_cmd_usage( VCOS_CMD_PARAM_T *param ) ++{ ++ VCOS_CMD_T *cmd_entry; ++ ++ cmd_entry = param->cmd_entry; ++ ++ if ( cmd_entry->sub_cmd_entry != NULL ) ++ { ++ /* This command is command with sub-commands */ ++ ++ usage( param, param->cmd_entry->sub_cmd_entry ); ++ } ++ else ++ { ++ vcos_cmd_printf( param, "Usage: " ); ++ print_argument_prefix( param ); ++ vcos_cmd_printf( param, "%s - %s\n", ++ param->cmd_entry->args, ++ param->cmd_entry->descr ); ++ } ++} ++ ++/***************************************************************************** ++* ++* Command to print out the help ++* ++* This help command is only called from the main menu. ++* ++*****************************************************************************/ ++ ++static VCOS_STATUS_T help_cmd( VCOS_CMD_PARAM_T *param ) ++{ ++ VCOS_CMD_T *found_entry; ++ ++#if 0 ++ { ++ int arg_idx; ++ ++ vcos_log_trace( "%s: argc = %d", __func__, param->argc ); ++ for ( arg_idx = 0; arg_idx < param->argc; arg_idx++ ) ++ { ++ vcos_log_trace( "%s: argv[%d] = '%s'", __func__, arg_idx, param->argv[arg_idx] ); ++ } ++ } ++#endif ++ ++ /* If there is an argument after the word help, then we want to print ++ * help for that command. ++ */ ++ ++ if ( param->argc == 1 ) ++ { ++ if ( param->cmd_parent_entry == cmd_globals.cmd_entry ) ++ { ++ /* Bare help - print the command usage for the root */ ++ ++ usage( param, cmd_globals.cmd_entry ); ++ return VCOS_SUCCESS; ++ } ++ ++ /* For all other cases help requires an argument */ ++ ++ vcos_cmd_error( param, "%s requires an argument", param->argv[0] ); ++ return VCOS_EINVAL; ++ } ++ ++ /* We were given an argument. */ ++ ++ if (( found_entry = find_cmd( param->cmd_parent_entry, param->argv[1] )) != NULL ) ++ { ++ /* Make it look like the command that was specified is the one that's ++ * currently running ++ */ ++ ++ param->cmd_entry = found_entry; ++ param->argv[0] = param->argv[1]; ++ param->argv++; ++ param->argc--; ++ ++ vcos_cmd_usage( param ); ++ return VCOS_SUCCESS; ++ } ++ ++ vcos_cmd_error( param, "- unrecognized command: '%s'", param->argv[1] ); ++ return VCOS_ENOENT; ++} ++ ++/***************************************************************************** ++* ++* Command to print out the version/build information. ++* ++*****************************************************************************/ ++ ++#ifdef HAVE_VCOS_VERSION ++ ++static VCOS_STATUS_T version_cmd( VCOS_CMD_PARAM_T *param ) ++{ ++ static const char* copyright = "Copyright (c) 2011 Broadcom"; ++ ++ vcos_cmd_printf( param, "%s %s\n%s\nversion %s\n", ++ vcos_get_build_date(), ++ vcos_get_build_time(), ++ copyright, ++ vcos_get_build_version() ); ++ ++ return VCOS_SUCCESS; ++} ++ ++#endif ++ ++/***************************************************************************** ++* ++* Internal commands ++* ++*****************************************************************************/ ++ ++static VCOS_CMD_T cmd_help = { "help", "[command]", help_cmd, NULL, "Prints command help information" }; ++ ++#ifdef HAVE_VCOS_VERSION ++static VCOS_CMD_T cmd_version = { "version", "", version_cmd, NULL, "Prints build/version information" }; ++#endif ++ ++/***************************************************************************** ++* ++* Walks the command table and executes the commands ++* ++*****************************************************************************/ ++ ++static VCOS_STATUS_T execute_cmd( VCOS_CMD_PARAM_T *param, VCOS_CMD_T *cmd_entry ) ++{ ++ const char *cmdStr; ++ VCOS_CMD_T *found_entry; ++ ++#if 0 ++ { ++ int arg_idx; ++ ++ vcos_cmd_printf( param, "%s: argc = %d", __func__, param->argc ); ++ for ( arg_idx = 0; arg_idx < param->argc; arg_idx++ ) ++ { ++ vcos_cmd_printf( param, " argv[%d] = '%s'", arg_idx, param->argv[arg_idx] ); ++ } ++ vcos_cmd_printf( param, "\n" ); ++ } ++#endif ++ ++ if ( param->argc <= 1 ) ++ { ++ /* No command specified */ ++ ++ vcos_cmd_error( param, "%s - no command specified", param->argv[0] ); ++ return VCOS_EINVAL; ++ } ++ ++ /* argv[0] is the command/program that caused us to get invoked, so we strip ++ * it off. ++ */ ++ ++ param->argc--; ++ param->argv++; ++ param->cmd_parent_entry = cmd_entry; ++ ++ /* Not the help command, scan for the command and execute it. */ ++ ++ cmdStr = param->argv[0]; ++ ++ if (( found_entry = find_cmd( cmd_entry, cmdStr )) != NULL ) ++ { ++ if ( found_entry->sub_cmd_entry != NULL ) ++ { ++ return execute_cmd( param, found_entry->sub_cmd_entry ); ++ } ++ ++ param->cmd_entry = found_entry; ++ return found_entry->cmd_fn( param ); ++ } ++ ++ /* Unrecognized command - check to see if it was the help command */ ++ ++ if ( vcos_strcmp( cmdStr, cmd_help.name ) == 0 ) ++ { ++ return help_cmd( param ); ++ } ++ ++ vcos_cmd_error( param, "- unrecognized command: '%s'", cmdStr ); ++ return VCOS_ENOENT; ++} ++ ++/***************************************************************************** ++* ++* Initializes the command line parser. ++* ++*****************************************************************************/ ++ ++static void vcos_cmd_init( void ) ++{ ++ vcos_mutex_create( &cmd_globals.lock, "vcos_cmd" ); ++ ++ cmd_globals.num_cmd_entries = 0; ++ cmd_globals.num_cmd_alloc = 0; ++ cmd_globals.cmd_entry = NULL; ++} ++ ++/***************************************************************************** ++* ++* Command line processor. ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_cmd_execute( int argc, char **argv, size_t result_size, char *result_buf ) ++{ ++ VCOS_STATUS_T rc = VCOS_EINVAL; ++ VCOS_CMD_PARAM_T param; ++ ++ vcos_once( &cmd_globals.initialized, vcos_cmd_init ); ++ ++ param.argc = argc; ++ param.argv = param.argv_orig = argv; ++ ++ param.use_log = 0; ++ param.result_size = result_size; ++ param.result_ptr = result_buf; ++ param.result_buf = result_buf; ++ ++ result_buf[0] = '\0'; ++ ++ vcos_mutex_lock( &cmd_globals.lock ); ++ ++ rc = execute_cmd( ¶m, cmd_globals.cmd_entry ); ++ ++ if ( param.use_log ) ++ { ++ cmd_log_results( ¶m ); ++ vcos_snprintf( result_buf, result_size, "results logged" ); ++ } ++ else ++ if ( cmd_globals.log_category != NULL ) ++ { ++ if ( result_buf[0] != '\0' ) ++ { ++ /* There is a partial line still buffered. */ ++ ++ vcos_cmd_printf( ¶m, "\n" ); ++ } ++ } ++ ++ vcos_mutex_unlock( &cmd_globals.lock ); ++ ++ return rc; ++} ++ ++/***************************************************************************** ++* ++* Registers a command entry with the command line processor ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_cmd_register( VCOS_CMD_T *cmd_entry ) ++{ ++ VCOS_STATUS_T rc; ++ VCOS_UNSIGNED new_num_cmd_alloc; ++ VCOS_CMD_T *new_cmd_entry; ++ VCOS_CMD_T *old_cmd_entry; ++ VCOS_CMD_T *scan_entry; ++ ++ vcos_once( &cmd_globals.initialized, vcos_cmd_init ); ++ ++ vcos_assert( cmd_entry != NULL ); ++ vcos_assert( cmd_entry->name != NULL ); ++ ++ vcos_log_trace( "%s: cmd '%s'", __FUNCTION__, cmd_entry->name ); ++ ++ vcos_assert( cmd_entry->args != NULL ); ++ vcos_assert(( cmd_entry->cmd_fn != NULL ) || ( cmd_entry->sub_cmd_entry != NULL )); ++ vcos_assert( cmd_entry->descr != NULL ); ++ ++ /* We expect vcos_cmd_init to be called before vcos_logging_init, so we ++ * need to defer registering our logging category until someplace ++ * like right here. ++ */ ++ ++ if ( vcos_cmd_log_category.name == NULL ) ++ { ++ /* ++ * If you're using the command interface, you pretty much always want ++ * log messages from this file to show up. So we change the default ++ * from ERROR to be the more reasonable INFO level. ++ */ ++ ++ vcos_log_set_level(&vcos_cmd_log_category, VCOS_LOG_INFO); ++ vcos_log_register("vcos_cmd", &vcos_cmd_log_category); ++ ++ /* We register a help command so that it shows up in the usage. */ ++ ++ vcos_cmd_register( &cmd_help ); ++#ifdef HAVE_VCOS_VERSION ++ vcos_cmd_register( &cmd_version ); ++#endif ++ } ++ ++ vcos_mutex_lock( &cmd_globals.lock ); ++ ++ if ( cmd_globals.num_cmd_entries >= cmd_globals.num_cmd_alloc ) ++ { ++ if ( cmd_globals.num_cmd_alloc == 0 ) ++ { ++ /* We haven't allocated a table yet */ ++ } ++ ++ /* The number 8 is rather arbitrary. */ ++ ++ new_num_cmd_alloc = cmd_globals.num_cmd_alloc + 8; ++ ++ /* The + 1 is to ensure that we always have a NULL entry at the end. */ ++ ++ new_cmd_entry = (VCOS_CMD_T *)vcos_calloc( new_num_cmd_alloc + 1, sizeof( *cmd_entry ), "vcos_cmd_entries" ); ++ if ( new_cmd_entry == NULL ) ++ { ++ rc = VCOS_ENOMEM; ++ goto out; ++ } ++ memcpy( new_cmd_entry, cmd_globals.cmd_entry, cmd_globals.num_cmd_entries * sizeof( *cmd_entry )); ++ cmd_globals.num_cmd_alloc = new_num_cmd_alloc; ++ old_cmd_entry = cmd_globals.cmd_entry; ++ cmd_globals.cmd_entry = new_cmd_entry; ++ vcos_free( old_cmd_entry ); ++ } ++ ++ if ( cmd_globals.num_cmd_entries == 0 ) ++ { ++ /* This is the first command being registered */ ++ ++ cmd_globals.cmd_entry[0] = *cmd_entry; ++ } ++ else ++ { ++ /* Keep the list in alphabetical order. We start at the end and work backwards ++ * shuffling entries up one until we find an insertion point. ++ */ ++ ++ for ( scan_entry = &cmd_globals.cmd_entry[cmd_globals.num_cmd_entries - 1]; ++ scan_entry >= cmd_globals.cmd_entry; scan_entry-- ) ++ { ++ if ( vcos_strcmp( cmd_entry->name, scan_entry->name ) > 0 ) ++ { ++ /* We found an insertion point. */ ++ ++ break; ++ } ++ ++ scan_entry[1] = scan_entry[0]; ++ } ++ scan_entry[1] = *cmd_entry; ++ } ++ cmd_globals.num_cmd_entries++; ++ ++ rc = VCOS_SUCCESS; ++ ++out: ++ ++ vcos_mutex_unlock( &cmd_globals.lock ); ++ return rc; ++} ++ ++/***************************************************************************** ++* ++* Registers multiple commands. ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_cmd_register_multiple( VCOS_CMD_T *cmd_entry ) ++{ ++ VCOS_STATUS_T status; ++ ++ while ( cmd_entry->name != NULL ) ++ { ++ if (( status = vcos_cmd_register( cmd_entry )) != VCOS_SUCCESS ) ++ { ++ return status; ++ } ++ cmd_entry++; ++ } ++ return VCOS_SUCCESS; ++} ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_common.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_common.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_common.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_common.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,87 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - common postamble code ++=============================================================================*/ ++ ++/** \file ++ * ++ * Postamble code included by the platform-specific header files ++ */ ++ ++#define VCOS_THREAD_PRI_DEFAULT VCOS_THREAD_PRI_NORMAL ++ ++#if !defined(VCOS_THREAD_PRI_INCREASE) ++#error Which way to thread priorities go? ++#endif ++ ++#if VCOS_THREAD_PRI_INCREASE < 0 ++/* smaller numbers are higher priority */ ++#define VCOS_THREAD_PRI_LESS(x) ((x)VCOS_THREAD_PRI_MIN?(x)-1:VCOS_THREAD_PRI_MIN) ++#else ++/* bigger numbers are lower priority */ ++#define VCOS_THREAD_PRI_MORE(x) ((x)VCOS_THREAD_PRI_MIN?(x)-1:VCOS_THREAD_PRI_MIN) ++#endif ++ ++/* Convenience for Brits: */ ++#define VCOS_APPLICATION_INITIALISE VCOS_APPLICATION_INITIALIZE ++ ++/* ++ * Check for constant definitions ++ */ ++#ifndef VCOS_TICKS_PER_SECOND ++#error VCOS_TICKS_PER_SECOND not defined ++#endif ++ ++#if !defined(VCOS_THREAD_PRI_MIN) || !defined(VCOS_THREAD_PRI_MAX) ++#error Priority range not defined ++#endif ++ ++#if !defined(VCOS_THREAD_PRI_HIGHEST) || !defined(VCOS_THREAD_PRI_LOWEST) || !defined(VCOS_THREAD_PRI_NORMAL) ++#error Priority ordering not defined ++#endif ++ ++#if !defined(VCOS_CAN_SET_STACK_ADDR) ++#error Can stack addresses be set on this platform? Please set this macro to either 0 or 1. ++#endif ++ ++#if (_VCOS_AFFINITY_CPU0|_VCOS_AFFINITY_CPU1) & (~_VCOS_AFFINITY_MASK) ++#error _VCOS_AFFINITY_CPUxxx values are not consistent with _VCOS_AFFINITY_MASK ++#endif ++ ++/** Append to the end of a singly-linked queue, O(1). Works with ++ * any structure where list has members 'head' and 'tail' and ++ * item has a 'next' pointer. ++ */ ++#define VCOS_QUEUE_APPEND_TAIL(list, item) {\ ++ (item)->next = NULL;\ ++ if (!(list)->head) {\ ++ (list)->head = (list)->tail = (item); \ ++ } else {\ ++ (list)->tail->next = (item); \ ++ (list)->tail = (item); \ ++ } \ ++} ++ ++#ifndef VCOS_HAVE_TIMER ++VCOSPRE_ void VCOSPOST_ vcos_timer_init(void); ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_blockpool.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_blockpool.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_blockpool.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_blockpool.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,271 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - event flags implemented via a semaphore ++=============================================================================*/ ++ ++#ifndef VCOS_GENERIC_BLOCKPOOL_H ++#define VCOS_GENERIC_BLOCKPOOL_H ++ ++/** ++ * \file ++ * ++ * This provides a generic, thread safe implementation of a VCOS block pool ++ * fixed size memory allocator. ++ */ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++ ++/** Bits 0 to (VCOS_BLOCKPOOL_SUBPOOL_BITS - 1) are used to store the ++ * subpool id. */ ++#define VCOS_BLOCKPOOL_SUBPOOL_BITS 3 ++#define VCOS_BLOCKPOOL_MAX_SUBPOOLS (1 << VCOS_BLOCKPOOL_SUBPOOL_BITS) ++ ++/* Make zero an invalid handle at the cost of decreasing the maximum ++ * number of blocks (2^28) by 1. Alternatively, a spare bit could be ++ * used to indicated valid blocks but there are likely to be better ++ * uses for spare bits. e.g. allowing more subpools ++ */ ++#define INDEX_OFFSET 1 ++ ++#define VCOS_BLOCKPOOL_HANDLE_GET_INDEX(h) \ ++ (((h) >> VCOS_BLOCKPOOL_SUBPOOL_BITS) - INDEX_OFFSET) ++ ++#define VCOS_BLOCKPOOL_HANDLE_GET_SUBPOOL(h) \ ++ ((h) & ((1 << VCOS_BLOCKPOOL_SUBPOOL_BITS) - 1)) ++ ++#define VCOS_BLOCKPOOL_HANDLE_CREATE(i,s) \ ++ ((((i) + INDEX_OFFSET) << VCOS_BLOCKPOOL_SUBPOOL_BITS) | (s)) ++ ++#define VCOS_BLOCKPOOL_INVALID_HANDLE 0 ++ ++typedef struct VCOS_BLOCKPOOL_HEADER_TAG ++{ ++ /* Blocks either refer to to the pool if they are allocated ++ * or the free list if they are available. ++ */ ++ union { ++ struct VCOS_BLOCKPOOL_HEADER_TAG *next; ++ struct VCOS_BLOCKPOOL_SUBPOOL_TAG* subpool; ++ } owner; ++} VCOS_BLOCKPOOL_HEADER_T; ++ ++typedef struct VCOS_BLOCKPOOL_SUBPOOL_TAG ++{ ++ /** VCOS_BLOCKPOOL_SUBPOOL_MAGIC */ ++ uint32_t magic; ++ VCOS_BLOCKPOOL_HEADER_T* free_list; ++ /* The start of the pool memory */ ++ void *mem; ++ /* Address of the first block header */ ++ void *start; ++ /** The number of blocks in this sub-pool */ ++ VCOS_UNSIGNED num_blocks; ++ /** Current number of available blocks in this sub-pool */ ++ VCOS_UNSIGNED available_blocks; ++ /** Pointers to the pool that owns this sub-pool */ ++ struct VCOS_BLOCKPOOL_TAG* owner; ++ /** Define properties such as memory ownership */ ++ uint32_t flags; ++} VCOS_BLOCKPOOL_SUBPOOL_T; ++ ++typedef struct VCOS_BLOCKPOOL_TAG ++{ ++ /** VCOS_BLOCKPOOL_MAGIC */ ++ uint32_t magic; ++ /** Thread safety for Alloc, Free, Delete, Stats */ ++ VCOS_MUTEX_T mutex; ++ /** The size of the block data */ ++ size_t block_data_size; ++ /** Block size inc overheads */ ++ size_t block_size; ++ /** Name for debugging */ ++ const char *name; ++ /* The number of subpools that may be used */ ++ VCOS_UNSIGNED num_subpools; ++ /** Number of blocks in each dynamically allocated subpool */ ++ VCOS_UNSIGNED num_extension_blocks; ++ /** Array of subpools. Subpool zero is is not deleted until the pool is ++ * destroed. If the index of the pool is < num_subpools and ++ * subpool[index.mem] is null then the subpool entry is valid but ++ * "not currently allocated" */ ++ VCOS_BLOCKPOOL_SUBPOOL_T subpools[VCOS_BLOCKPOOL_MAX_SUBPOOLS]; ++} VCOS_BLOCKPOOL_T; ++ ++#define VCOS_BLOCKPOOL_ROUND_UP(x,s) (((x) + ((s) - 1)) & ~((s) - 1)) ++/** ++ * Calculates the size in bytes required for a block pool containing ++ * num_blocks of size block_size plus any overheads. ++ * ++ * The block pool header (VCOS_BLOCKPOOL_T) is allocated separately ++ * ++ * Overheads: ++ * block_size + header must be a multiple of sizeof(void*) ++ * The start of the first block may need to be up to wordsize - 1 bytes ++ * into the given buffer because statically allocated buffers within structures ++ * are not guaranteed to be word aligned. ++ */ ++#define VCOS_BLOCKPOOL_SIZE(num_blocks, block_size) \ ++ ((VCOS_BLOCKPOOL_ROUND_UP((block_size) + sizeof(VCOS_BLOCKPOOL_HEADER_T), \ ++ sizeof(void*)) * (num_blocks)) + sizeof(void*)) ++ ++/** ++ * Sanity check to verify whether a handle is potentially a blockpool handle ++ * when the pool pointer is not available. ++ * ++ * If the pool pointer is availabe use vcos_blockpool_elem_to_handle instead. ++ * ++ * @param handle the handle to verify ++ * @param max_blocks the expected maximum number of block in the pool ++ * that the handle belongs to. ++ */ ++#define VCOS_BLOCKPOOL_IS_VALID_HANDLE_FORMAT(handle, max_blocks) \ ++ ((handle) != VCOS_BLOCKPOOL_INVALID_HANDLE \ ++ && VCOS_BLOCKPOOL_HANDLE_GET_INDEX((handle)) < (max_blocks)) ++ ++VCOSPRE_ ++ VCOS_STATUS_T VCOSPOST_ vcos_generic_blockpool_init(VCOS_BLOCKPOOL_T *pool, ++ VCOS_UNSIGNED num_blocks, VCOS_UNSIGNED block_size, ++ void *start, VCOS_UNSIGNED pool_size, const char *name); ++ ++VCOSPRE_ ++ VCOS_STATUS_T VCOSPOST_ vcos_generic_blockpool_create_on_heap( ++ VCOS_BLOCKPOOL_T *pool, VCOS_UNSIGNED num_blocks, ++ VCOS_UNSIGNED block_size, const char *name); ++ ++VCOSPRE_ ++ VCOS_STATUS_T VCOSPOST_ vcos_generic_blockpool_extend(VCOS_BLOCKPOOL_T *pool, ++ VCOS_UNSIGNED num_extensions, VCOS_UNSIGNED num_blocks); ++ ++VCOSPRE_ void VCOSPOST_ *vcos_generic_blockpool_alloc(VCOS_BLOCKPOOL_T *pool); ++ ++VCOSPRE_ void VCOSPOST_ *vcos_generic_blockpool_calloc(VCOS_BLOCKPOOL_T *pool); ++ ++VCOSPRE_ void VCOSPOST_ vcos_generic_blockpool_free(void *block); ++ ++VCOSPRE_ ++ VCOS_UNSIGNED VCOSPOST_ vcos_generic_blockpool_available_count( ++ VCOS_BLOCKPOOL_T *pool); ++ ++VCOSPRE_ ++ VCOS_UNSIGNED VCOSPOST_ vcos_generic_blockpool_used_count( ++ VCOS_BLOCKPOOL_T *pool); ++ ++VCOSPRE_ void VCOSPOST_ vcos_generic_blockpool_delete(VCOS_BLOCKPOOL_T *pool); ++ ++VCOSPRE_ uint32_t VCOSPOST_ vcos_generic_blockpool_elem_to_handle(void *block); ++ ++VCOSPRE_ void VCOSPOST_ ++ *vcos_generic_blockpool_elem_from_handle( ++ VCOS_BLOCKPOOL_T *pool, uint32_t handle); ++ ++VCOSPRE_ uint32_t VCOSPOST_ ++ vcos_generic_blockpool_is_valid_elem( ++ VCOS_BLOCKPOOL_T *pool, const void *block); ++#if defined(VCOS_INLINE_BODIES) ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_blockpool_init(VCOS_BLOCKPOOL_T *pool, ++ VCOS_UNSIGNED num_blocks, VCOS_UNSIGNED block_size, ++ void *start, VCOS_UNSIGNED pool_size, const char *name) ++{ ++ return vcos_generic_blockpool_init(pool, num_blocks, block_size, ++ start, pool_size, name); ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_blockpool_create_on_heap(VCOS_BLOCKPOOL_T *pool, ++ VCOS_UNSIGNED num_blocks, VCOS_UNSIGNED block_size, const char *name) ++{ ++ return vcos_generic_blockpool_create_on_heap( ++ pool, num_blocks, block_size, name); ++} ++ ++VCOS_INLINE_IMPL ++ VCOS_STATUS_T VCOSPOST_ vcos_blockpool_extend(VCOS_BLOCKPOOL_T *pool, ++ VCOS_UNSIGNED num_extensions, VCOS_UNSIGNED num_blocks) ++{ ++ return vcos_generic_blockpool_extend(pool, num_extensions, num_blocks); ++} ++ ++VCOS_INLINE_IMPL ++void *vcos_blockpool_alloc(VCOS_BLOCKPOOL_T *pool) ++{ ++ return vcos_generic_blockpool_alloc(pool); ++} ++ ++VCOS_INLINE_IMPL ++void *vcos_blockpool_calloc(VCOS_BLOCKPOOL_T *pool) ++{ ++ return vcos_generic_blockpool_calloc(pool); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_blockpool_free(void *block) ++{ ++ vcos_generic_blockpool_free(block); ++} ++ ++VCOS_INLINE_IMPL ++VCOS_UNSIGNED vcos_blockpool_available_count(VCOS_BLOCKPOOL_T *pool) ++{ ++ return vcos_generic_blockpool_available_count(pool); ++} ++ ++VCOS_INLINE_IMPL ++VCOS_UNSIGNED vcos_blockpool_used_count(VCOS_BLOCKPOOL_T *pool) ++{ ++ return vcos_generic_blockpool_used_count(pool); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_blockpool_delete(VCOS_BLOCKPOOL_T *pool) ++{ ++ vcos_generic_blockpool_delete(pool); ++} ++ ++VCOS_INLINE_IMPL ++uint32_t vcos_blockpool_elem_to_handle(void *block) ++{ ++ return vcos_generic_blockpool_elem_to_handle(block); ++} ++ ++VCOS_INLINE_IMPL ++void *vcos_blockpool_elem_from_handle(VCOS_BLOCKPOOL_T *pool, uint32_t handle) ++{ ++ return vcos_generic_blockpool_elem_from_handle(pool, handle); ++} ++ ++VCOS_INLINE_IMPL ++uint32_t vcos_blockpool_is_valid_elem(VCOS_BLOCKPOOL_T *pool, const void *block) ++{ ++ return vcos_generic_blockpool_is_valid_elem(pool, block); ++} ++#endif /* VCOS_INLINE_BODIES */ ++ ++ ++#ifdef __cplusplus ++} ++#endif ++#endif /* VCOS_GENERIC_BLOCKPOOL_H */ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_event_flags.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_event_flags.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_event_flags.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_event_flags.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,311 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - event flags implemented via mutexes ++=============================================================================*/ ++ ++#include "interface/vcos/vcos.h" ++#include "interface/vcos/generic/vcos_generic_event_flags.h" ++ ++#include ++ ++/** A structure created by a thread that waits on the event flags ++ * for a particular combination of flags to arrive. ++ */ ++typedef struct VCOS_EVENT_WAITER_T ++{ ++ VCOS_UNSIGNED requested_events; /**< The events wanted */ ++ VCOS_UNSIGNED actual_events; /**< Actual events found */ ++ VCOS_UNSIGNED op; /**< The event operation to be used */ ++ VCOS_STATUS_T return_status; /**< The return status the waiter should pass back */ ++ VCOS_EVENT_FLAGS_T *flags; /**< Pointer to the original 'flags' structure */ ++ VCOS_THREAD_T *thread; /**< Thread waiting */ ++ struct VCOS_EVENT_WAITER_T *next; ++} VCOS_EVENT_WAITER_T; ++ ++#ifndef NDEBUG ++static int waiter_list_valid(VCOS_EVENT_FLAGS_T *flags); ++#endif ++static void event_flags_timer_expired(void *cxt); ++ ++VCOS_STATUS_T vcos_generic_event_flags_create(VCOS_EVENT_FLAGS_T *flags, const char *name) ++{ ++ VCOS_STATUS_T rc; ++ if ((rc=vcos_mutex_create(&flags->lock, name)) != VCOS_SUCCESS) ++ { ++ return rc; ++ } ++ ++ flags->events = 0; ++ flags->waiters.head = flags->waiters.tail = 0; ++ return rc; ++} ++ ++void vcos_generic_event_flags_set(VCOS_EVENT_FLAGS_T *flags, ++ VCOS_UNSIGNED bitmask, ++ VCOS_OPTION op) ++{ ++ vcos_assert(flags); ++ vcos_mutex_lock(&flags->lock); ++ if (op == VCOS_OR) ++ { ++ flags->events |= bitmask; ++ } ++ else if (op == VCOS_AND) ++ { ++ flags->events &= bitmask; ++ } ++ else ++ { ++ vcos_assert(0); ++ } ++ ++ /* Now wake up any threads that have now become signalled. */ ++ if (flags->waiters.head != NULL) ++ { ++ VCOS_UNSIGNED consumed_events = 0; ++ VCOS_EVENT_WAITER_T **pcurrent_waiter = &flags->waiters.head; ++ VCOS_EVENT_WAITER_T *prev_waiter = NULL; ++ ++ /* Walk the chain of tasks suspend on this event flag group to determine ++ * if any of their requests can be satisfied. ++ */ ++ while ((*pcurrent_waiter) != NULL) ++ { ++ VCOS_EVENT_WAITER_T *curr_waiter = *pcurrent_waiter; ++ ++ /* Determine if this request has been satisfied */ ++ ++ /* First, find the event flags in common. */ ++ VCOS_UNSIGNED waiter_satisfied = flags->events & curr_waiter->requested_events; ++ ++ /* Second, determine if all the event flags must match */ ++ if (curr_waiter->op & VCOS_AND) ++ { ++ /* All requested events must be present */ ++ waiter_satisfied = (waiter_satisfied == curr_waiter->requested_events); ++ } ++ ++ /* Wake this one up? */ ++ if (waiter_satisfied) ++ { ++ ++ if (curr_waiter->op & VCOS_CONSUME) ++ { ++ consumed_events |= curr_waiter->requested_events; ++ } ++ ++ /* remove this block from the list, taking care at the end */ ++ *pcurrent_waiter = curr_waiter->next; ++ if (curr_waiter->next == NULL) ++ flags->waiters.tail = prev_waiter; ++ ++ vcos_assert(waiter_list_valid(flags)); ++ ++ curr_waiter->return_status = VCOS_SUCCESS; ++ curr_waiter->actual_events = flags->events; ++ ++ _vcos_thread_sem_post(curr_waiter->thread); ++ } ++ else ++ { ++ /* move to next element in the list */ ++ prev_waiter = *pcurrent_waiter; ++ pcurrent_waiter = &(curr_waiter->next); ++ } ++ } ++ ++ flags->events &= ~consumed_events; ++ ++ } ++ ++ vcos_mutex_unlock(&flags->lock); ++} ++ ++void vcos_generic_event_flags_delete(VCOS_EVENT_FLAGS_T *flags) ++{ ++ vcos_mutex_delete(&flags->lock); ++} ++ ++extern VCOS_STATUS_T vcos_generic_event_flags_get(VCOS_EVENT_FLAGS_T *flags, ++ VCOS_UNSIGNED bitmask, ++ VCOS_OPTION op, ++ VCOS_UNSIGNED suspend, ++ VCOS_UNSIGNED *retrieved_bits) ++{ ++ VCOS_EVENT_WAITER_T waitreq; ++ VCOS_STATUS_T rc = VCOS_EAGAIN; ++ int satisfied = 0; ++ ++ vcos_assert(flags); ++ ++ /* default retrieved bits to 0 */ ++ *retrieved_bits = 0; ++ ++ vcos_mutex_lock(&flags->lock); ++ switch (op & VCOS_EVENT_FLAG_OP_MASK) ++ { ++ case VCOS_AND: ++ if ((flags->events & bitmask) == bitmask) ++ { ++ *retrieved_bits = flags->events; ++ rc = VCOS_SUCCESS; ++ satisfied = 1; ++ if (op & VCOS_CONSUME) ++ flags->events &= ~bitmask; ++ } ++ break; ++ ++ case VCOS_OR: ++ if (flags->events & bitmask) ++ { ++ *retrieved_bits = flags->events; ++ rc = VCOS_SUCCESS; ++ satisfied = 1; ++ if (op & VCOS_CONSUME) ++ flags->events &= ~bitmask; ++ } ++ break; ++ ++ default: ++ vcos_assert(0); ++ rc = VCOS_EINVAL; ++ break; ++ } ++ ++ if (!satisfied && suspend) ++ { ++ /* Have to go to sleep. ++ * ++ * Append to tail so we get FIFO ordering. ++ */ ++ waitreq.requested_events = bitmask; ++ waitreq.op = op; ++ waitreq.return_status = VCOS_EAGAIN; ++ waitreq.flags = flags; ++ waitreq.actual_events = 0; ++ waitreq.thread = vcos_thread_current(); ++ waitreq.next = 0; ++ vcos_assert(waitreq.thread != (VCOS_THREAD_T*)-1); ++ VCOS_QUEUE_APPEND_TAIL(&flags->waiters, &waitreq); ++ ++ if (suspend != (VCOS_UNSIGNED)-1) ++ _vcos_task_timer_set(event_flags_timer_expired, &waitreq, suspend); ++ ++ vcos_mutex_unlock(&flags->lock); ++ /* go to sleep and wait to be signalled or timeout */ ++ ++ _vcos_thread_sem_wait(); ++ ++ *retrieved_bits = waitreq.actual_events; ++ rc = waitreq.return_status; ++ ++ /* cancel the timer - do not do this while holding the mutex as it ++ * might be waiting for the timeout function to complete, which will ++ * try to take the mutex. ++ */ ++ if (suspend != (VCOS_UNSIGNED)-1) ++ _vcos_task_timer_cancel(); ++ } ++ else ++ { ++ vcos_mutex_unlock(&flags->lock); ++ } ++ ++ return rc; ++} ++ ++ ++/** Called when a get call times out. Remove this thread's ++ * entry from the waiting queue, then resume the thread. ++ */ ++static void event_flags_timer_expired(void *cxt) ++{ ++ VCOS_EVENT_WAITER_T *waitreq = (VCOS_EVENT_WAITER_T *)cxt; ++ VCOS_EVENT_FLAGS_T *flags = waitreq->flags; ++ VCOS_EVENT_WAITER_T **plist; ++ VCOS_EVENT_WAITER_T *prev = NULL; ++ VCOS_THREAD_T *thread = 0; ++ ++ vcos_assert(flags); ++ ++ vcos_mutex_lock(&flags->lock); ++ ++ /* walk the list of waiting threads on this event group, and remove ++ * the one that has expired. ++ * ++ * FIXME: could use doubly-linked list if lots of threads are found ++ * to be waiting on a single event flag instance. ++ */ ++ plist = &flags->waiters.head; ++ while (*plist != NULL) ++ { ++ if (*plist == waitreq) ++ { ++ int at_end; ++ /* found it */ ++ thread = (*plist)->thread; ++ at_end = ((*plist)->next == NULL); ++ ++ /* link past */ ++ *plist = (*plist)->next; ++ if (at_end) ++ flags->waiters.tail = prev; ++ ++ break; ++ } ++ prev = *plist; ++ plist = &(*plist)->next; ++ } ++ vcos_assert(waiter_list_valid(flags)); ++ ++ vcos_mutex_unlock(&flags->lock); ++ ++ if (thread) ++ { ++ _vcos_thread_sem_post(thread); ++ } ++} ++ ++#ifndef NDEBUG ++ ++static int waiter_list_valid(VCOS_EVENT_FLAGS_T *flags) ++{ ++ int valid; ++ /* Either both head and tail are NULL, or neither are NULL */ ++ if (flags->waiters.head == NULL) ++ { ++ valid = (flags->waiters.tail == NULL); ++ } ++ else ++ { ++ valid = (flags->waiters.tail != NULL); ++ } ++ ++ /* If head and tail point at the same non-NULL element, then there ++ * is only one element in the list. ++ */ ++ if (flags->waiters.head && (flags->waiters.head == flags->waiters.tail)) ++ { ++ valid = (flags->waiters.head->next == NULL); ++ } ++ return valid; ++} ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_event_flags.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_event_flags.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_event_flags.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_event_flags.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,118 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - event flags implemented via a semaphore ++=============================================================================*/ ++ ++#ifndef VCOS_GENERIC_EVENT_FLAGS_H ++#define VCOS_GENERIC_EVENT_FLAGS_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++ ++/** ++ * \file ++ * ++ * This provides event flags (as per Nucleus Event Groups) based on a ++ * mutex, a semaphore (per waiting thread) and a timer (per waiting ++ * thread). ++ * ++ * The data structure is a 32 bit unsigned int (the current set of ++ * flags) and a linked list of clients waiting to be 'satisfied'. ++ * ++ * The mutex merely locks access to the data structure. If a client ++ * calls vcos_event_flags_get() and the requested bits are not already ++ * present, it then sleeps on its per-thread semaphore after adding ++ * this semaphore to the queue waiting. It also sets up a timer. ++ * ++ * The per-thread semaphore and timer are actually stored in the ++ * thread context (joinable thread). In future it may become necessary ++ * to support non-VCOS threads by using thread local storage to ++ * create these objects and associate them with the thread. ++ */ ++ ++struct VCOS_EVENT_WAITER_T; ++ ++typedef struct VCOS_EVENT_FLAGS_T ++{ ++ VCOS_UNSIGNED events; /**< Events currently set */ ++ VCOS_MUTEX_T lock; /**< Serialize access */ ++ struct ++ { ++ struct VCOS_EVENT_WAITER_T *head; /**< List of threads waiting */ ++ struct VCOS_EVENT_WAITER_T *tail; /**< List of threads waiting */ ++ } waiters; ++} VCOS_EVENT_FLAGS_T; ++ ++#define VCOS_OR 1 ++#define VCOS_AND 2 ++#define VCOS_CONSUME 4 ++#define VCOS_OR_CONSUME (VCOS_OR | VCOS_CONSUME) ++#define VCOS_AND_CONSUME (VCOS_AND | VCOS_CONSUME) ++#define VCOS_EVENT_FLAG_OP_MASK (VCOS_OR|VCOS_AND) ++ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_generic_event_flags_create(VCOS_EVENT_FLAGS_T *flags, const char *name); ++VCOSPRE_ void VCOSPOST_ vcos_generic_event_flags_set(VCOS_EVENT_FLAGS_T *flags, ++ VCOS_UNSIGNED events, ++ VCOS_OPTION op); ++VCOSPRE_ void VCOSPOST_ vcos_generic_event_flags_delete(VCOS_EVENT_FLAGS_T *); ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_generic_event_flags_get(VCOS_EVENT_FLAGS_T *flags, ++ VCOS_UNSIGNED requested_events, ++ VCOS_OPTION op, ++ VCOS_UNSIGNED suspend, ++ VCOS_UNSIGNED *retrieved_events); ++ ++#ifdef VCOS_INLINE_BODIES ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_event_flags_create(VCOS_EVENT_FLAGS_T *flags, const char *name) { ++ return vcos_generic_event_flags_create(flags, name); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_event_flags_set(VCOS_EVENT_FLAGS_T *flags, ++ VCOS_UNSIGNED events, ++ VCOS_OPTION op) { ++ vcos_generic_event_flags_set(flags, events, op); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_event_flags_delete(VCOS_EVENT_FLAGS_T *f) { ++ vcos_generic_event_flags_delete(f); ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_event_flags_get(VCOS_EVENT_FLAGS_T *flags, ++ VCOS_UNSIGNED requested_events, ++ VCOS_OPTION op, ++ VCOS_UNSIGNED suspend, ++ VCOS_UNSIGNED *retrieved_events) { ++ return vcos_generic_event_flags_get(flags, requested_events, op, suspend, retrieved_events); ++} ++ ++#endif /* VCOS_INLINE_BODIES */ ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_named_sem.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_named_sem.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_named_sem.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_named_sem.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,92 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - named semaphores ++=============================================================================*/ ++ ++#ifndef VCOS_GENERIC_NAMED_SEM_H ++#define VCOS_GENERIC_NAMED_SEM_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++ ++/** ++ * \file ++ * ++ * Generic support for named semaphores, using regular ones. This is only ++ * suitable for emulating them on an embedded MMUless system, since there is ++ * no support for opening semaphores across process boundaries. ++ * ++ */ ++ ++#define VCOS_NAMED_SEMAPHORE_NAMELEN 64 ++ ++/* In theory we could use the name facility provided within Nucleus. However, this ++ * is hard to do as semaphores are constantly being created and destroyed; we ++ * would need to stop everything while allocating the memory for the semaphore ++ * list and then walking it. So keep our own list. ++ */ ++typedef struct VCOS_NAMED_SEMAPHORE_T ++{ ++ struct VCOS_NAMED_SEMAPHORE_IMPL_T *actual; /**< There are 'n' named semaphores per 1 actual semaphore */ ++ VCOS_SEMAPHORE_T *sem; /**< Pointer to actual underlying semaphore */ ++} VCOS_NAMED_SEMAPHORE_T; ++ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ ++vcos_generic_named_semaphore_create(VCOS_NAMED_SEMAPHORE_T *sem, const char *name, VCOS_UNSIGNED count); ++ ++VCOSPRE_ void VCOSPOST_ vcos_named_semaphore_delete(VCOS_NAMED_SEMAPHORE_T *sem); ++ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ _vcos_named_semaphore_init(void); ++VCOSPRE_ void VCOSPOST_ _vcos_named_semaphore_deinit(void); ++ ++#if defined(VCOS_INLINE_BODIES) ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_named_semaphore_create(VCOS_NAMED_SEMAPHORE_T *sem, const char *name, VCOS_UNSIGNED count) { ++ return vcos_generic_named_semaphore_create(sem, name, count); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_named_semaphore_wait(VCOS_NAMED_SEMAPHORE_T *sem) { ++ vcos_semaphore_wait(sem->sem); ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_named_semaphore_trywait(VCOS_NAMED_SEMAPHORE_T *sem) { ++ return vcos_semaphore_trywait(sem->sem); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_named_semaphore_post(VCOS_NAMED_SEMAPHORE_T *sem) { ++ vcos_semaphore_post(sem->sem); ++} ++ ++ ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_quickslow_mutex.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_quickslow_mutex.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_quickslow_mutex.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_quickslow_mutex.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,86 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - reentrant mutexes created from regular ones. ++=============================================================================*/ ++ ++#ifndef VCOS_GENERIC_QUICKSLOW_MUTEX_H ++#define VCOS_GENERIC_QUICKSLOW_MUTEX_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++ ++/** ++ * \file ++ * ++ * Quickslow Mutexes implemented as regular ones (i.e. quick and slow modes are the same). ++ * ++ */ ++ ++typedef VCOS_MUTEX_T VCOS_QUICKSLOW_MUTEX_T; ++ ++#if defined(VCOS_INLINE_BODIES) ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_quickslow_mutex_create(VCOS_QUICKSLOW_MUTEX_T *m, const char *name) ++{ ++ return vcos_mutex_create(m, name); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_quickslow_mutex_delete(VCOS_QUICKSLOW_MUTEX_T *m) ++{ ++ vcos_mutex_delete(m); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_quickslow_mutex_lock(VCOS_QUICKSLOW_MUTEX_T *m) ++{ ++ while (vcos_mutex_lock(m) == VCOS_EAGAIN); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_quickslow_mutex_unlock(VCOS_QUICKSLOW_MUTEX_T *m) ++{ ++ vcos_mutex_unlock(m); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_quickslow_mutex_lock_quick(VCOS_QUICKSLOW_MUTEX_T *m) ++{ ++ while (vcos_mutex_lock(m) == VCOS_EAGAIN); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_quickslow_mutex_unlock_quick(VCOS_QUICKSLOW_MUTEX_T *m) ++{ ++ vcos_mutex_unlock(m); ++} ++ ++#endif ++ ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_reentrant_mtx.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_reentrant_mtx.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_reentrant_mtx.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_reentrant_mtx.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,86 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - reentrant mutexes created from regular ones. ++=============================================================================*/ ++ ++#ifndef VCOS_GENERIC_REENTRANT_MUTEX_H ++#define VCOS_GENERIC_REENTRANT_MUTEX_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++ ++/** ++ * \file ++ * ++ * Reentrant Mutexes from regular ones. ++ * ++ */ ++ ++typedef struct VCOS_REENTRANT_MUTEX_T ++{ ++ VCOS_MUTEX_T mutex; ++ VCOS_THREAD_T *owner; ++ unsigned count; ++} VCOS_REENTRANT_MUTEX_T; ++ ++/* Extern definitions of functions that do the actual work */ ++ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_generic_reentrant_mutex_create(VCOS_REENTRANT_MUTEX_T *m, const char *name); ++ ++VCOSPRE_ void VCOSPOST_ vcos_generic_reentrant_mutex_delete(VCOS_REENTRANT_MUTEX_T *m); ++ ++VCOSPRE_ void VCOSPOST_ vcos_generic_reentrant_mutex_lock(VCOS_REENTRANT_MUTEX_T *m); ++ ++VCOSPRE_ void VCOSPOST_ vcos_generic_reentrant_mutex_unlock(VCOS_REENTRANT_MUTEX_T *m); ++ ++/* Inline forwarding functions */ ++ ++#if defined(VCOS_INLINE_BODIES) ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_reentrant_mutex_create(VCOS_REENTRANT_MUTEX_T *m, const char *name) { ++ return vcos_generic_reentrant_mutex_create(m,name); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_reentrant_mutex_delete(VCOS_REENTRANT_MUTEX_T *m) { ++ vcos_generic_reentrant_mutex_delete(m); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_reentrant_mutex_lock(VCOS_REENTRANT_MUTEX_T *m) { ++ vcos_generic_reentrant_mutex_lock(m); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_reentrant_mutex_unlock(VCOS_REENTRANT_MUTEX_T *m) { ++ vcos_generic_reentrant_mutex_unlock(m); ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_tls.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_tls.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_tls.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_generic_tls.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,155 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - generic thread local storage ++=============================================================================*/ ++ ++#ifndef VCOS_GENERIC_TLS_H ++#define VCOS_GENERIC_TLS_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++ ++/** ++ * \file ++ * ++ * Do an emulation of Thread Local Storage. The platform needs to ++ * provide a way to set and get a per-thread pointer which is ++ * where the TLS data itself is stored. ++ * ++ * ++ * Each thread that wants to join in this scheme needs to call ++ * vcos_tls_thread_register(). ++ * ++ * The platform needs to support the macros/functions ++ * _vcos_tls_thread_ptr_set() and _vcos_tls_thread_ptr_get(). ++ */ ++ ++#ifndef VCOS_WANT_TLS_EMULATION ++#error Should not be included unless TLS emulation is defined ++#endif ++ ++/** Number of slots to reserve per thread. This results in an overhead ++ * of this many words per thread. ++ */ ++#define VCOS_TLS_MAX_SLOTS 4 ++ ++/** TLS key. Allocating one of these reserves the client one of the ++ * available slots. ++ */ ++typedef VCOS_UNSIGNED VCOS_TLS_KEY_T; ++ ++/** TLS per-thread structure. Each thread gets one of these ++ * if TLS emulation (rather than native TLS support) is ++ * being used. ++ */ ++typedef struct VCOS_TLS_THREAD_T ++{ ++ void *slots[VCOS_TLS_MAX_SLOTS]; ++} VCOS_TLS_THREAD_T; ++ ++/* ++ * Internal APIs ++ */ ++ ++/** Register this thread's TLS storage area. */ ++VCOSPRE_ void VCOSPOST_ vcos_tls_thread_register(VCOS_TLS_THREAD_T *); ++ ++/** Create a new TLS key */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_generic_tls_create(VCOS_TLS_KEY_T *key); ++ ++/** Delete a TLS key */ ++VCOSPRE_ void VCOSPOST_ vcos_generic_tls_delete(VCOS_TLS_KEY_T tls); ++ ++/** Initialise the TLS library */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_tls_init(void); ++ ++/** Deinitialise the TLS library */ ++VCOSPRE_ void VCOSPOST_ vcos_tls_deinit(void); ++ ++#if defined(VCOS_INLINE_BODIES) ++ ++#undef VCOS_ASSERT_LOGGING_DISABLE ++#define VCOS_ASSERT_LOGGING_DISABLE 1 ++ ++/* ++ * Implementations of public API functions ++ */ ++ ++/** Set the given value. Since everything is per-thread, there is no need ++ * for any locking. ++ */ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_tls_set(VCOS_TLS_KEY_T tls, void *v) { ++ VCOS_TLS_THREAD_T *tlsdata = _vcos_tls_thread_ptr_get(); ++ vcos_assert(tlsdata); /* Fires if this thread has not been registered */ ++ if (tlsslots[tls] = v; ++ return VCOS_SUCCESS; ++ } ++ else ++ { ++ vcos_assert(0); ++ return VCOS_EINVAL; ++ } ++} ++ ++/** Get the given value. No locking required. ++ */ ++VCOS_INLINE_IMPL ++void *vcos_tls_get(VCOS_TLS_KEY_T tls) { ++ VCOS_TLS_THREAD_T *tlsdata = _vcos_tls_thread_ptr_get(); ++ vcos_assert(tlsdata); /* Fires if this thread has not been registered */ ++ if (tlsslots[tls]; ++ } ++ else ++ { ++ vcos_assert(0); ++ return NULL; ++ } ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_tls_create(VCOS_TLS_KEY_T *key) { ++ return vcos_generic_tls_create(key); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_tls_delete(VCOS_TLS_KEY_T tls) { ++ vcos_generic_tls_delete(tls); ++} ++ ++#undef VCOS_ASSERT_LOGGING_DISABLE ++#define VCOS_ASSERT_LOGGING_DISABLE 0 ++ ++#endif /* VCOS_INLINE_BODIES */ ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_joinable_thread_from_plain.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_joinable_thread_from_plain.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_joinable_thread_from_plain.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_joinable_thread_from_plain.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,214 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - implementation: joinable thread from plain ++=============================================================================*/ ++ ++/** \file ++ * ++ * Header file for platforms creating the joinable thread from a lowlevel ++ * thread. ++ * ++ * In addition to the actual thread, the following are also created: ++ * ++ * - a semaphore to wait on when joining the thread ++ * - a semaphore to support counted suspend/resume (used by event group) ++ * - a per-thread timer (used by event group, but could be removed) ++ */ ++ ++#ifndef VCOS_JOINABLE_THREAD_FROM_PLAIN_H ++#define VCOS_JOINABLE_THREAD_FROM_PLAIN_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_semaphore.h" ++#include "interface/vcos/vcos_lowlevel_thread.h" ++#include "interface/vcos/vcos_timer.h" ++ ++#ifdef VCOS_WANT_TLS_EMULATION ++#include "interface/vcos/generic/vcos_generic_tls.h" ++#endif ++ ++#define VCOS_THREAD_MAGIC 0x56436a74 ++ ++#define VCOS_THREAD_VALID(t) (t->magic == VCOS_THREAD_MAGIC) ++#define VCOS_HAVE_THREAD_AT_EXIT 1 ++ ++/** Thread attribute structure. Clients should not manipulate this directly, but ++ * should instead use the provided functions. ++ */ ++typedef struct VCOS_THREAD_ATTR_T ++{ ++ void *ta_stackaddr; ++ VCOS_UNSIGNED ta_stacksz; ++ VCOS_UNSIGNED ta_priority; ++ VCOS_UNSIGNED ta_affinity; ++ VCOS_UNSIGNED ta_timeslice; ++ VCOS_UNSIGNED legacy; ++ VCOS_UNSIGNED ta_autostart; ++} VCOS_THREAD_ATTR_T; ++ ++/** Each thread gets a timer, which is for internal VCOS use. ++ */ ++typedef struct _VCOS_THREAD_TIMER_T ++{ ++ VCOS_TIMER_T timer; ++ void (*pfn)(void *); ++ void *cxt; ++} _VCOS_THREAD_TIMER_T; ++ ++typedef void (*VCOS_THREAD_EXIT_HANDLER_T)(void *); ++/** Called at thread exit. ++ */ ++typedef struct VCOS_THREAD_EXIT_T ++{ ++ VCOS_THREAD_EXIT_HANDLER_T pfn; ++ void *cxt; ++} VCOS_THREAD_EXIT_T; ++#define VCOS_MAX_EXIT_HANDLERS 8 ++ ++/* The name field isn't used for anything, so we can just copy the ++ * the pointer. Nucleus makes its own copy. ++ */ ++typedef const char * VCOS_LLTHREAD_T_NAME; ++#define _VCOS_LLTHREAD_NAME(dst,src) (dst)=(src) ++ ++/* ++ * Simulated TLS support ++ */ ++ ++ ++/** Thread structure. ++ * ++ * \warning Do not access the members of this structure directly! ++ */ ++typedef struct VCOS_THREAD_T ++{ ++ VCOS_LLTHREAD_T thread; /**< The underlying thread */ ++ char name[16]; /**< The name */ ++ unsigned int magic; /**< For debug */ ++ void *exit_data; /**< Exit data passed out in vcos_joinable_thread_exit() */ ++ void *stack; /**< Stack, if not supplied by caller */ ++ VCOS_SEMAPHORE_T wait; /**< Semaphore to wait on at join */ ++ VCOS_SEMAPHORE_T suspend; /**< Semaphore to wait on for counted suspend */ ++ int16_t joined; /**< Joined yet? For debug. */ ++ VCOS_UNSIGNED legacy; /**< Use (argc,argv) for entry point arguments */ ++ void *(*entry)(void*); /**< Entry point */ ++ void *arg; /**< Argument passed to entry point */ ++ void *(*term)(void*); /**< Termination function, used by reaper */ ++ void *term_arg; /**< Argument passed to termination function */ ++ _VCOS_THREAD_TIMER_T _timer; /**< Internal timer, mainly for event groups */ ++#ifdef VCOS_WANT_TLS_EMULATION ++ VCOS_TLS_THREAD_T _tls; /**< TLS data when native TLS not available, or NULL */ ++#endif ++ /** Array of functions to call at thread exit */ ++ VCOS_THREAD_EXIT_T at_exit[VCOS_MAX_EXIT_HANDLERS]; ++ ++ struct VCOS_THREAD_T *next; /**< For linked lists of threads */ ++} VCOS_THREAD_T; ++ ++#if defined(VCOS_INLINE_BODIES) ++ ++VCOS_INLINE_IMPL ++void vcos_thread_attr_setstack(VCOS_THREAD_ATTR_T *attrs, void *addr, VCOS_UNSIGNED stacksz) { ++ attrs->ta_stackaddr = addr; ++ attrs->ta_stacksz = stacksz; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_thread_attr_setstacksize(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED stacksz) { ++ attrs->ta_stacksz = stacksz; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_thread_attr_setpriority(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED pri) { ++ attrs->ta_priority = pri; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_thread_attr_setaffinity(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED affinity) { ++ attrs->ta_affinity = affinity; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_thread_attr_settimeslice(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED ts) { ++ attrs->ta_timeslice = ts; ++} ++ ++VCOS_INLINE_IMPL ++void _vcos_thread_attr_setlegacyapi(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED legacy) { ++ attrs->legacy = legacy; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_thread_attr_setautostart(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED autostart) { ++ attrs->ta_autostart = autostart; ++} ++ ++VCOS_INLINE_IMPL ++VCOS_THREAD_T *vcos_thread_current(void) { ++ VCOS_THREAD_T *ret = (VCOS_THREAD_T*)vcos_llthread_current(); ++ /*If we're called from a non-vcos thread, this assert will fail. ++ *XXX FIXME why is this commented out? ++ *vcos_assert(ret->magic == VCOS_THREAD_MAGIC); ++ */ ++ return ret; ++} ++ ++VCOS_INLINE_IMPL ++int vcos_thread_running(VCOS_THREAD_T *thread) { ++ return vcos_llthread_running(&thread->thread); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_thread_resume(VCOS_THREAD_T *thread) { ++ vcos_llthread_resume(&thread->thread); ++} ++ ++#endif /* VCOS_INLINE_BODIES */ ++ ++/** ++ * \brief Create a VCOS_THREAD_T for the current thread. This is so we can have ++ * VCOS_THREAD_Ts even for threads not originally created by VCOS (eg the ++ * thread that calls vcos_init) ++ */ ++extern VCOS_STATUS_T _vcos_thread_create_attach(VCOS_THREAD_T *thread, ++ const char *name); ++ ++/** ++ * \brief Deletes the VCOS_THREAD_T, but does not wait for the underlying ++ * thread to exit. This will cleanup everything created by ++ * _vcos_thread_create_attach ++ */ ++extern void _vcos_thread_delete(VCOS_THREAD_T *thread); ++ ++/** Register a function to be called when the current thread exits. ++ */ ++extern VCOS_STATUS_T vcos_thread_at_exit(void (*pfn)(void*), void *cxt); ++ ++/** Deregister a previously registered at-exit function. ++ */ ++extern void vcos_thread_deregister_at_exit(void (*pfn)(void*), void *cxt); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif /* VCOS_JOINABLE_THREAD_FROM_PLAIN_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_latch_from_sem.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_latch_from_sem.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_latch_from_sem.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_latch_from_sem.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,59 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - Construct a latch from a semaphore ++=============================================================================*/ ++ ++/** FIXME: rename to vcos_mutex_from_sem.c ++ */ ++ ++typedef struct VCOS_MUTEX_T { ++ VCOS_SEMAPHORE_T sem; ++ struct VCOS_THREAD_T *owner; ++} VCOS_MUTEX_T; ++ ++extern VCOS_STATUS_T vcos_generic_mutex_create(VCOS_MUTEX_T *latch, const char *name); ++extern void vcos_generic_mutex_delete(VCOS_MUTEX_T *latch); ++extern VCOS_STATUS_T vcos_generic_mutex_lock(VCOS_MUTEX_T *latch); ++extern void vcos_generic_mutex_unlock(VCOS_MUTEX_T *latch); ++ ++#if defined(VCOS_INLINE_BODIES) ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_mutex_create(VCOS_MUTEX_T *latch, const char *name) { ++ return vcos_generic_mutex_create(latch,name); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_mutex_delete(VCOS_MUTEX_T *latch) { ++ vcos_generic_mutex_delete(latch); ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_mutex_lock(VCOS_MUTEX_T *latch) { ++ return vcos_generic_mutex_lock(latch); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_mutex_unlock(VCOS_MUTEX_T *latch) { ++ vcos_generic_mutex_unlock(latch); ++} ++ ++#endif /* VCOS_INLINE_BODIES */ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_logcat.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_logcat.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_logcat.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_logcat.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,560 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++Categorized logging for VCOS - a generic implementation. ++=============================================================================*/ ++ ++#include "interface/vcos/vcos.h" ++#include "interface/vcos/vcos_ctype.h" ++#include "interface/vcos/vcos_string.h" ++ ++static VCOS_MUTEX_T lock; ++static int warned_loglevel; /* only warn about invalid log level once */ ++static VCOS_VLOG_IMPL_FUNC_T vcos_vlog_impl_func = vcos_vlog_default_impl; ++ ++#define VCOS_LOG_CATEGORY (&dflt_log_category) ++static VCOS_LOG_CAT_T dflt_log_category; ++VCOS_LOG_CAT_T *vcos_logging_categories = NULL; ++static int inited; ++ ++#if VCOS_HAVE_CMD ++ ++/* ++ * For kernel or videocore purposes, we generally want the log command. For ++ * user-space apps, they might want to provide their own log command, so we ++ * don't include the built in on. ++ * ++ * So pthreads/vcos_platform.h defines VCOS_WANT_LOG_CMD to be 0. It is ++ * undefined elsewhere. ++ */ ++ ++# if !defined( VCOS_WANT_LOG_CMD ) ++# define VCOS_WANT_LOG_CMD 1 ++# endif ++#else ++# define VCOS_WANT_LOG_CMD 0 ++#endif ++ ++#if VCOS_WANT_LOG_CMD ++ ++/***************************************************************************** ++* ++* Does a vcos_assert(0), which is useful to test logging. ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_log_assert_cmd( VCOS_CMD_PARAM_T *param ) ++{ ++ (void)param; ++ ++#if defined( NDEBUG ) && !defined( VCOS_RELEASE_ASSERTS ) ++ vcos_log_error( "vcos_asserts have been compiled out" ); ++ vcos_cmd_printf( param, "vcos_asserts have been compiled out - did a vcos_log_error instead\n" ); ++#else ++ vcos_assert(0); ++ vcos_cmd_printf( param, "Executed vcos_assert(0)\n" ); ++#endif ++ ++ return VCOS_SUCCESS; ++} ++ ++/***************************************************************************** ++* ++* Sets a vcos logging level ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_log_set_cmd( VCOS_CMD_PARAM_T *param ) ++{ ++ VCOS_LOG_CAT_T *cat; ++ char *name; ++ char *levelStr; ++ VCOS_LOG_LEVEL_T level; ++ VCOS_STATUS_T status; ++ ++ if ( param->argc != 3 ) ++ { ++ vcos_cmd_usage( param ); ++ return VCOS_EINVAL; ++ } ++ ++ name = param->argv[1]; ++ levelStr = param->argv[2]; ++ ++ if ( vcos_string_to_log_level( levelStr, &level ) != VCOS_SUCCESS ) ++ { ++ vcos_cmd_printf( param, "Unrecognized logging level: '%s'\n", levelStr ); ++ return VCOS_EINVAL; ++ } ++ ++ vcos_mutex_lock(&lock); ++ ++ status = VCOS_SUCCESS; ++ for ( cat = vcos_logging_categories; cat != NULL; cat = cat->next ) ++ { ++ if ( vcos_strcmp( name, cat->name ) == 0 ) ++ { ++ cat->level = level; ++ vcos_cmd_printf( param, "Category %s level set to %s\n", name, levelStr ); ++ break; ++ } ++ } ++ if ( cat == NULL ) ++ { ++ vcos_cmd_printf( param, "Unrecognized category: '%s'\n", name ); ++ status = VCOS_ENOENT; ++ } ++ ++ vcos_mutex_unlock(&lock); ++ ++ return status; ++} ++ ++/***************************************************************************** ++* ++* Prints out the current settings for a given category (or all cvategories) ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_log_status_cmd( VCOS_CMD_PARAM_T *param ) ++{ ++ VCOS_LOG_CAT_T *cat; ++ VCOS_STATUS_T status; ++ ++ vcos_mutex_lock(&lock); ++ ++ if ( param->argc == 1) ++ { ++ int nw; ++ int nameWidth = 0; ++ ++ /* Print information about all of the categories. */ ++ ++ for ( cat = vcos_logging_categories; cat != NULL; cat = cat->next ) ++ { ++ nw = (int)strlen( cat->name ); ++ ++ if ( nw > nameWidth ) ++ { ++ nameWidth = nw; ++ } ++ } ++ ++ for ( cat = vcos_logging_categories; cat != NULL; cat = cat->next ) ++ { ++ vcos_cmd_printf( param, "%-*s - %s\n", nameWidth, cat->name, vcos_log_level_to_string( cat->level )); ++ } ++ } ++ else ++ { ++ /* Print information about a particular category */ ++ ++ for ( cat = vcos_logging_categories; cat != NULL; cat = cat->next ) ++ { ++ if ( vcos_strcmp( cat->name, param->argv[1] ) == 0 ) ++ { ++ vcos_cmd_printf( param, "%s - %s\n", cat->name, vcos_log_level_to_string( cat->level )); ++ break; ++ } ++ } ++ if ( cat == NULL ) ++ { ++ vcos_cmd_printf( param, "Unrecognized logging category: '%s'\n", param->argv[1] ); ++ status = VCOS_ENOENT; ++ goto out; ++ } ++ } ++ ++ status = VCOS_SUCCESS; ++out: ++ vcos_mutex_unlock(&lock); ++ ++ return status; ++} ++ ++/***************************************************************************** ++* ++* Prints out the current settings for a given category (or all cvategories) ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_log_test_cmd( VCOS_CMD_PARAM_T *param ) ++{ ++ if ( param->argc == 1 ) ++ { ++ static int seq_num = 100; ++ ++ /* No additional arguments - generate a message with an incrementing number */ ++ ++ vcos_log_error( "Test message %d", seq_num ); ++ ++ seq_num++; ++ vcos_cmd_printf( param, "Logged 'Test message %d'\n", seq_num ); ++ } ++ else ++ { ++ int arg_idx; ++ ++ /* Arguments supplied - log these */ ++ ++ for ( arg_idx = 0; arg_idx < param->argc; arg_idx++ ) ++ { ++ vcos_log_error( "argv[%d] = '%s'", arg_idx, param->argv[arg_idx] ); ++ } ++ vcos_cmd_printf( param, "Logged %d line(s) of test data\n", param->argc ); ++ } ++ return VCOS_SUCCESS; ++} ++ ++/***************************************************************************** ++* ++* Internal commands ++* ++*****************************************************************************/ ++ ++static VCOS_CMD_T log_cmd_entry[] = ++{ ++ { "assert", "", vcos_log_assert_cmd, NULL, "Does a vcos_assert(0) to test logging" }, ++ { "set", "category level", vcos_log_set_cmd, NULL, "Sets the vcos logging level for a category" }, ++ { "status", "[category]", vcos_log_status_cmd, NULL, "Prints the vcos log status for a (or all) categories" }, ++ { "test", "[arbitrary text]", vcos_log_test_cmd, NULL, "Does a vcos_log to test logging" }, ++ ++ { NULL, NULL, NULL, NULL, NULL } ++}; ++ ++static VCOS_CMD_T cmd_log = ++ { "log", "command [args]", NULL, log_cmd_entry, "Commands related to vcos logging" }; ++ ++#endif ++ ++void vcos_logging_init(void) ++{ ++ if (inited) ++ { ++ /* FIXME: should print a warning or something here */ ++ return; ++ } ++ vcos_mutex_create(&lock, "vcos_log"); ++ ++ vcos_log_platform_init(); ++ ++ vcos_log_register("default", &dflt_log_category); ++ ++#if VCOS_WANT_LOG_CMD ++ vcos_cmd_register( &cmd_log ); ++#endif ++ ++ vcos_assert(!inited); ++ inited = 1; ++} ++ ++/** Read an alphanumeric token, returning True if we succeeded. ++ */ ++ ++static int read_tok(char *tok, size_t toklen, const char **pstr, char sep) ++{ ++ const char *str = *pstr; ++ size_t n = 0; ++ char ch; ++ ++ /* skip past any whitespace */ ++ while (str[0] && isspace((int)(str[0]))) ++ str++; ++ ++ while ((ch = *str) != '\0' && ++ ch != sep && ++ (isalnum((int)ch) || (ch == '_')) && ++ n != toklen-1) ++ { ++ tok[n++] = ch; ++ str++; ++ } ++ ++ /* did it work out? */ ++ if (ch == '\0' || ch == sep) ++ { ++ if (ch) str++; /* move to next token if not at end */ ++ /* yes */ ++ tok[n] = '\0'; ++ *pstr = str; ++ return 1; ++ } ++ else ++ { ++ /* no */ ++ return 0; ++ } ++} ++ ++const char *vcos_log_level_to_string( VCOS_LOG_LEVEL_T level ) ++{ ++ switch (level) ++ { ++ case VCOS_LOG_UNINITIALIZED: return "uninit"; ++ case VCOS_LOG_NEVER: return "never"; ++ case VCOS_LOG_ERROR: return "error"; ++ case VCOS_LOG_WARN: return "warn"; ++ case VCOS_LOG_INFO: return "info"; ++ case VCOS_LOG_TRACE: return "trace"; ++ } ++ return "???"; ++} ++ ++VCOS_STATUS_T vcos_string_to_log_level( const char *str, VCOS_LOG_LEVEL_T *level ) ++{ ++ if (strcmp(str,"error") == 0) ++ *level = VCOS_LOG_ERROR; ++ else if (strcmp(str,"never") == 0) ++ *level = VCOS_LOG_NEVER; ++ else if (strcmp(str,"warn") == 0) ++ *level = VCOS_LOG_WARN; ++ else if (strcmp(str,"warning") == 0) ++ *level = VCOS_LOG_WARN; ++ else if (strcmp(str,"info") == 0) ++ *level = VCOS_LOG_INFO; ++ else if (strcmp(str,"trace") == 0) ++ *level = VCOS_LOG_TRACE; ++ else ++ return VCOS_EINVAL; ++ ++ return VCOS_SUCCESS; ++} ++ ++static int read_level(VCOS_LOG_LEVEL_T *level, const char **pstr, char sep) ++{ ++ char buf[16]; ++ int ret = 1; ++ if (read_tok(buf,sizeof(buf),pstr,sep)) ++ { ++ if (vcos_string_to_log_level(buf,level) != VCOS_SUCCESS) ++ { ++ vcos_log("Invalid trace level '%s'\n", buf); ++ ret = 0; ++ } ++ } ++ else ++ { ++ ret = 0; ++ } ++ return ret; ++} ++ ++void vcos_log_register(const char *name, VCOS_LOG_CAT_T *category) ++{ ++ const char *env; ++ VCOS_LOG_CAT_T *i; ++ ++ category->name = name; ++ if ( category->level == VCOS_LOG_UNINITIALIZED ) ++ { ++ category->level = VCOS_LOG_ERROR; ++ } ++ category->flags.want_prefix = (category != &dflt_log_category ); ++ ++ vcos_mutex_lock(&lock); ++ ++ /* is it already registered? */ ++ for (i = vcos_logging_categories; i ; i = i->next ) ++ { ++ if (i == category) ++ { ++ i->refcount++; ++ break; ++ } ++ } ++ ++ if (!i) ++ { ++ /* not yet registered */ ++ category->next = vcos_logging_categories; ++ vcos_logging_categories = category; ++ category->refcount++; ++ ++ vcos_log_platform_register(category); ++ } ++ ++ vcos_mutex_unlock(&lock); ++ ++ /* Check to see if this log level has been enabled. Look for ++ * (,)* ++ * ++ * VC_LOGLEVEL=ilcs:info,vchiq:warn ++ */ ++ ++ env = _VCOS_LOG_LEVEL(); ++ if (env) ++ { ++ do ++ { ++ char env_name[64]; ++ VCOS_LOG_LEVEL_T level; ++ if (read_tok(env_name, sizeof(env_name), &env, ':') && ++ read_level(&level, &env, ',')) ++ { ++ if (strcmp(env_name, name) == 0) ++ { ++ category->level = level; ++ break; ++ } ++ } ++ else ++ { ++ if (!warned_loglevel) ++ { ++ vcos_log("VC_LOGLEVEL format invalid at %s\n", env); ++ warned_loglevel = 1; ++ } ++ return; ++ } ++ } while (env[0] != '\0'); ++ } ++ ++ vcos_log_info( "Registered log category '%s' with level %s", ++ category->name, ++ vcos_log_level_to_string( category->level )); ++} ++ ++void vcos_log_unregister(VCOS_LOG_CAT_T *category) ++{ ++ VCOS_LOG_CAT_T **pcat; ++ vcos_mutex_lock(&lock); ++ category->refcount--; ++ if (category->refcount == 0) ++ { ++ pcat = &vcos_logging_categories; ++ while (*pcat != category) ++ { ++ if (!*pcat) ++ break; /* possibly deregistered twice? */ ++ if ((*pcat)->next == NULL) ++ { ++ vcos_assert(0); /* already removed! */ ++ vcos_mutex_unlock(&lock); ++ return; ++ } ++ pcat = &(*pcat)->next; ++ } ++ if (*pcat) ++ *pcat = category->next; ++ ++ vcos_log_platform_unregister(category); ++ } ++ vcos_mutex_unlock(&lock); ++} ++ ++VCOSPRE_ const VCOS_LOG_CAT_T * VCOSPOST_ vcos_log_get_default_category(void) ++{ ++ return &dflt_log_category; ++} ++ ++void vcos_set_log_options(const char *opt) ++{ ++ (void)opt; ++} ++ ++void vcos_log_dump_mem_impl( const VCOS_LOG_CAT_T *cat, ++ const char *label, ++ uint32_t addr, ++ const void *voidMem, ++ size_t numBytes ) ++{ ++ const uint8_t *mem = (const uint8_t *)voidMem; ++ size_t offset; ++ char lineBuf[ 100 ]; ++ char *s; ++ ++ while ( numBytes > 0 ) ++ { ++ s = lineBuf; ++ ++ for ( offset = 0; offset < 16; offset++ ) ++ { ++ if ( offset < numBytes ) ++ { ++ s += vcos_snprintf( s, 4, "%02x ", mem[ offset ]); ++ } ++ else ++ { ++ s += vcos_snprintf( s, 4, " " ); ++ } ++ } ++ ++ for ( offset = 0; offset < 16; offset++ ) ++ { ++ if ( offset < numBytes ) ++ { ++ uint8_t ch = mem[ offset ]; ++ ++ if (( ch < ' ' ) || ( ch > '~' )) ++ { ++ ch = '.'; ++ } ++ *s++ = (char)ch; ++ } ++ } ++ *s++ = '\0'; ++ ++ if (( label != NULL ) && ( *label != '\0' )) ++ { ++ vcos_log_impl( cat, VCOS_LOG_INFO, "%s: %08x: %s", label, addr, lineBuf ); ++ } ++ else ++ { ++ vcos_log_impl( cat, VCOS_LOG_INFO, "%08x: %s", addr, lineBuf ); ++ } ++ ++ addr += 16; ++ mem += 16; ++ if ( numBytes > 16 ) ++ { ++ numBytes -= 16; ++ } ++ else ++ { ++ numBytes = 0; ++ } ++ } ++ ++} ++ ++void vcos_log_impl(const VCOS_LOG_CAT_T *cat, VCOS_LOG_LEVEL_T _level, const char *fmt, ...) ++{ ++ va_list ap; ++ va_start(ap,fmt); ++ vcos_vlog_impl( cat, _level, fmt, ap ); ++ va_end(ap); ++} ++ ++void vcos_vlog_impl(const VCOS_LOG_CAT_T *cat, VCOS_LOG_LEVEL_T _level, const char *fmt, va_list args) ++{ ++ vcos_vlog_impl_func( cat, _level, fmt, args ); ++} ++ ++void vcos_set_vlog_impl( VCOS_VLOG_IMPL_FUNC_T vlog_impl_func ) ++{ ++ if ( vlog_impl_func == NULL ) ++ { ++ vcos_vlog_impl_func = vcos_vlog_default_impl; ++ } ++ else ++ { ++ vcos_vlog_impl_func = vlog_impl_func; ++ } ++} ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mem_from_malloc.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mem_from_malloc.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mem_from_malloc.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mem_from_malloc.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,84 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - memory alloc implementation ++=============================================================================*/ ++ ++#include "interface/vcos/vcos.h" ++ ++#ifndef _vcos_platform_malloc ++#include ++#define _vcos_platform_malloc malloc ++#define _vcos_platform_free free ++#endif ++ ++typedef struct malloc_header_s { ++ uint32_t guardword; ++ uint32_t size; ++ const char *description; ++ void *ptr; ++} MALLOC_HEADER_T; ++ ++ ++#define MIN_ALIGN sizeof(MALLOC_HEADER_T) ++ ++#define GUARDWORDHEAP 0xa55a5aa5 ++ ++void *vcos_generic_mem_alloc_aligned(VCOS_UNSIGNED size, VCOS_UNSIGNED align, const char *desc) ++{ ++ int local_align = align == 0 ? 1 : align; ++ int required_size = size + local_align + sizeof(MALLOC_HEADER_T); ++ void *ptr = _vcos_platform_malloc(required_size); ++ void *ret = (void *)VCOS_ALIGN_UP(((char *)ptr)+sizeof(MALLOC_HEADER_T), local_align); ++ MALLOC_HEADER_T *h = ((MALLOC_HEADER_T *)ret)-1; ++ ++ h->size = size; ++ h->description = desc; ++ h->guardword = GUARDWORDHEAP; ++ h->ptr = ptr; ++ ++ return ret; ++} ++ ++void *vcos_generic_mem_alloc(VCOS_UNSIGNED size, const char *desc) ++{ ++ return vcos_generic_mem_alloc_aligned(size,MIN_ALIGN,desc); ++} ++ ++void *vcos_generic_mem_calloc(VCOS_UNSIGNED count, VCOS_UNSIGNED sz, const char *desc) ++{ ++ uint32_t size = count*sz; ++ void *ptr = vcos_generic_mem_alloc_aligned(size,MIN_ALIGN,desc); ++ if (ptr) ++ { ++ memset(ptr, 0, size); ++ } ++ return ptr; ++} ++ ++void vcos_generic_mem_free(void *ptr) ++{ ++ MALLOC_HEADER_T *h; ++ if (! ptr) return; ++ ++ h = ((MALLOC_HEADER_T *)ptr)-1; ++ vcos_assert(h->guardword == GUARDWORDHEAP); ++ _vcos_platform_free(h->ptr); ++} ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mem_from_malloc.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mem_from_malloc.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mem_from_malloc.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mem_from_malloc.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,65 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++Create the vcos_malloc API from the regular system malloc/free ++=============================================================================*/ ++ ++/** ++ * \file ++ * ++ * Create the vcos malloc API from a regular system malloc/free library. ++ * ++ * The API lets callers specify an alignment. ++ * ++ * Under VideoCore this is not needed, as we can simply use the rtos_malloc routines. ++ * But on host platforms that won't be the case. ++ * ++ */ ++ ++VCOSPRE_ void * VCOSPOST_ vcos_generic_mem_alloc(VCOS_UNSIGNED sz, const char *desc); ++VCOSPRE_ void * VCOSPOST_ vcos_generic_mem_calloc(VCOS_UNSIGNED count, VCOS_UNSIGNED sz, const char *descr); ++VCOSPRE_ void VCOSPOST_ vcos_generic_mem_free(void *ptr); ++VCOSPRE_ void * VCOSPOST_ vcos_generic_mem_alloc_aligned(VCOS_UNSIGNED sz, VCOS_UNSIGNED align, const char *desc); ++ ++#ifdef VCOS_INLINE_BODIES ++ ++VCOS_INLINE_IMPL ++void *vcos_malloc(VCOS_UNSIGNED size, const char *description) { ++ return vcos_generic_mem_alloc(size, description); ++} ++ ++VCOS_INLINE_IMPL ++void *vcos_calloc(VCOS_UNSIGNED num, VCOS_UNSIGNED size, const char *description) { ++ return vcos_generic_mem_calloc(num, size, description); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_free(void *ptr) { ++ vcos_generic_mem_free(ptr); ++} ++ ++VCOS_INLINE_IMPL ++void * vcos_malloc_aligned(VCOS_UNSIGNED size, VCOS_UNSIGNED align, const char *description) { ++ return vcos_generic_mem_alloc_aligned(size, align, description); ++} ++ ++ ++#endif /* VCOS_INLINE_BODIES */ ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mutexes_are_reentrant.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mutexes_are_reentrant.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mutexes_are_reentrant.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_mutexes_are_reentrant.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,79 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - reentrant mutexes mapped directly to regular ones ++=============================================================================*/ ++ ++#ifndef VCOS_GENERIC_REENTRANT_MUTEX_H ++#define VCOS_GENERIC_REENTRANT_MUTEX_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "interface/vcos/vcos_mutex.h" ++ ++/** ++ * \file ++ * ++ * Reentrant Mutexes directly using the native re-entrant mutex. ++ * ++ */ ++ ++typedef VCOS_MUTEX_T VCOS_REENTRANT_MUTEX_T; ++ ++/* Inline forwarding functions */ ++ ++#if defined(VCOS_INLINE_BODIES) ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_reentrant_mutex_create(VCOS_REENTRANT_MUTEX_T *m, const char *name) { ++ return vcos_mutex_create(m,name); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_reentrant_mutex_delete(VCOS_REENTRANT_MUTEX_T *m) { ++ vcos_mutex_delete(m); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_reentrant_mutex_lock(VCOS_REENTRANT_MUTEX_T *m) { ++ vcos_mutex_lock(m); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_reentrant_mutex_unlock(VCOS_REENTRANT_MUTEX_T *m) { ++ vcos_mutex_unlock(m); ++} ++ ++VCOS_INLINE_IMPL ++int vcos_reentrant_mutex_is_locked(VCOS_REENTRANT_MUTEX_T *m) { ++ return vcos_mutex_is_locked(m); ++} ++ ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_thread_reaper.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_thread_reaper.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_thread_reaper.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/generic/vcos_thread_reaper.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,46 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - thread reaping ++=============================================================================*/ ++ ++#ifndef VCOS_THREAD_REAPER_H ++#define VCOS_THREAD_REAPER_H ++ ++#define VCOS_HAVE_THREAD_REAPER ++ ++/** Initialise the thread reaper. ++ */ ++VCOS_STATUS_T vcos_thread_reaper_init(void); ++ ++/** Reap a thread. Arranges for the thread to be automatically ++ * joined. ++ * ++ * @sa vcos_thread_join(). ++ * ++ * @param thread the thread to terminate ++ * @param on_terminated called after the thread has exited ++ * @param cxt pass back to the callback ++ * ++ */ ++void vcos_thread_reap(VCOS_THREAD_T *thread, void (*on_terminated)(void*), void *cxt); ++ ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/stdint.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/stdint.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/stdint.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/stdint.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,31 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS fAbstraction Layer - stdint.h C standard header ++=============================================================================*/ ++ ++#ifndef _VCOS_PLATFORM_LINUX_STDINT_H ++#define _VCOS_PLATFORM_LINUX_STDINT_H ++ ++/* The Linux kernel does not have a so we have to provide one of ++ our own. */ ++ ++#include /* includes integer types */ ++ ++#endif /* _VCOS_PLATFORM_LINUX_STDINT_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,627 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - pthreads types ++=============================================================================*/ ++ ++#define VCOS_INLINE_BODIES ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if defined( CONFIG_BCM_KNLLOG_SUPPORT ) ++#include ++#endif ++#include "interface/vcos/vcos.h" ++#ifdef HAVE_VCOS_VERSION ++#include "interface/vcos/vcos_build_info.h" ++#endif ++ ++VCOS_CFG_ENTRY_T vcos_cfg_dir; ++VCOS_CFG_ENTRY_T vcos_logging_cfg_dir; ++VCOS_CFG_ENTRY_T vcos_version_cfg; ++ ++#ifndef VCOS_DEFAULT_STACK_SIZE ++#define VCOS_DEFAULT_STACK_SIZE 4096 ++#endif ++ ++static VCOS_THREAD_ATTR_T default_attrs = { ++ 0, ++ VCOS_DEFAULT_STACK_SIZE, ++}; ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) ++static DEFINE_SEMAPHORE(lock); ++#else ++static DECLARE_MUTEX(lock); ++#endif ++ ++typedef void (*LEGACY_ENTRY_FN_T)(int, void *); ++ ++/** Wrapper function around the real thread function. Posts the semaphore ++ * when completed. ++ */ ++static int vcos_thread_wrapper(void *arg) ++{ ++ void *ret; ++ VCOS_THREAD_T *thread = arg; ++ ++ vcos_assert(thread->magic == VCOS_THREAD_MAGIC); ++ ++ thread->thread.thread = current; ++ ++ vcos_add_thread(thread); ++ ++#ifdef VCOS_WANT_TLS_EMULATION ++ vcos_tls_thread_register(&thread->_tls); ++#endif ++ ++ if (thread->legacy) ++ { ++ LEGACY_ENTRY_FN_T fn = (LEGACY_ENTRY_FN_T)thread->entry; ++ fn(0,thread->arg); ++ ret = 0; ++ } ++ else ++ { ++ ret = thread->entry(thread->arg); ++ } ++ ++ thread->exit_data = ret; ++ ++ vcos_remove_thread(current); ++ ++ /* For join and cleanup */ ++ vcos_semaphore_post(&thread->wait); ++ ++ return 0; ++} ++ ++VCOS_STATUS_T vcos_thread_create(VCOS_THREAD_T *thread, ++ const char *name, ++ VCOS_THREAD_ATTR_T *attrs, ++ VCOS_THREAD_ENTRY_FN_T entry, ++ void *arg) ++{ ++ VCOS_STATUS_T st; ++ struct task_struct *kthread; ++ ++ memset(thread, 0, sizeof(*thread)); ++ thread->magic = VCOS_THREAD_MAGIC; ++ strlcpy( thread->name, name, sizeof( thread->name )); ++ thread->legacy = attrs ? attrs->legacy : 0; ++ thread->entry = entry; ++ thread->arg = arg; ++ ++ if (!name) ++ { ++ vcos_assert(0); ++ return VCOS_EINVAL; ++ } ++ ++ st = vcos_semaphore_create(&thread->wait, NULL, 0); ++ if (st != VCOS_SUCCESS) ++ { ++ return st; ++ } ++ ++ st = vcos_semaphore_create(&thread->suspend, NULL, 0); ++ if (st != VCOS_SUCCESS) ++ { ++ return st; ++ } ++ ++ /*required for event groups */ ++ vcos_timer_create(&thread->_timer.timer, thread->name, NULL, NULL); ++ ++ kthread = kthread_create((int (*)(void *))vcos_thread_wrapper, (void*)thread, name); ++ vcos_assert(kthread != NULL); ++ set_user_nice(kthread, attrs->ta_priority); ++ thread->thread.thread = kthread; ++ wake_up_process(kthread); ++ return VCOS_SUCCESS; ++} ++ ++void vcos_thread_join(VCOS_THREAD_T *thread, ++ void **pData) ++{ ++ vcos_assert(thread); ++ vcos_assert(thread->magic == VCOS_THREAD_MAGIC); ++ ++ thread->joined = 1; ++ ++ vcos_semaphore_wait(&thread->wait); ++ ++ if (pData) ++ { ++ *pData = thread->exit_data; ++ } ++ ++ /* Clean up */ ++ if (thread->stack) ++ vcos_free(thread->stack); ++ ++ vcos_semaphore_delete(&thread->wait); ++ vcos_semaphore_delete(&thread->suspend); ++ ++} ++ ++uint32_t vcos_getmicrosecs( void ) ++{ ++ struct timeval tv; ++/*XXX FIX ME! switch to ktime_get_ts to use MONOTONIC clock */ ++ do_gettimeofday(&tv); ++ return (tv.tv_sec*1000000) + tv.tv_usec; ++} ++ ++VCOS_STATUS_T vcos_timer_init(void) ++{ ++ return VCOS_SUCCESS; ++} ++ ++static const char *log_prefix[] = ++{ ++ "", /* VCOS_LOG_UNINITIALIZED */ ++ "", /* VCOS_LOG_NEVER */ ++ KERN_ERR, /* VCOS_LOG_ERROR */ ++ KERN_WARNING, /* VCOS_LOG_WARN */ ++ KERN_INFO, /* VCOS_LOG_INFO */ ++ KERN_INFO /* VCOS_LOG_TRACE */ ++}; ++ ++void vcos_vlog_default_impl(const VCOS_LOG_CAT_T *cat, VCOS_LOG_LEVEL_T _level, const char *fmt, va_list args) ++{ ++ char *newline = strchr( fmt, '\n' ); ++ const char *prefix; ++ const char *real_fmt; ++ ++ preempt_disable(); ++ { ++ if ( *fmt == '<' ) ++ { ++ prefix = fmt; ++ real_fmt= &fmt[3]; ++ } ++ else ++ { ++ prefix = log_prefix[_level]; ++ real_fmt = fmt; ++ } ++#if defined( CONFIG_BCM_KNLLOG_SUPPORT ) ++ knllog_ventry( "vcos", real_fmt, args ); ++#endif ++ printk( "%.3svcos: [%d]: ", prefix, current->pid ); ++ vprintk( real_fmt, args ); ++ ++ if ( newline == NULL ) ++ { ++ printk("\n"); ++ } ++ } ++ preempt_enable(); ++} ++ ++ ++const char * _vcos_log_level(void) ++{ ++ return NULL; ++} ++ ++/***************************************************************************** ++* ++* Displays the version information in /proc/vcos/version ++* ++*****************************************************************************/ ++ ++#ifdef HAVE_VCOS_VERSION ++ ++static void show_version( VCOS_CFG_BUF_T buf, void *data ) ++{ ++ static const char* copyright = "Copyright (c) 2011 Broadcom"; ++ ++ vcos_cfg_buf_printf( buf, "Built %s %s on %s\n%s\nversion %s\n", ++ vcos_get_build_date(), ++ vcos_get_build_time(), ++ vcos_get_build_hostname(), ++ copyright, ++ vcos_get_build_version() ); ++} ++ ++#endif ++ ++/***************************************************************************** ++* ++* Initialises vcos ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_init(void) ++{ ++ if ( vcos_cfg_mkdir( &vcos_cfg_dir, NULL, "vcos" ) != VCOS_SUCCESS ) ++ { ++ printk( KERN_ERR "%s: Unable to create vcos cfg entry\n", __func__ ); ++ } ++ vcos_logging_init(); ++ ++#ifdef HAVE_VCOS_VERSION ++ if ( vcos_cfg_create_entry( &vcos_version_cfg, &vcos_cfg_dir, "version", ++ show_version, NULL, NULL ) != VCOS_SUCCESS ) ++ { ++ printk( KERN_ERR "%s: Unable to create vcos cfg entry 'version'\n", __func__ ); ++ } ++#endif ++ ++ return VCOS_SUCCESS; ++} ++ ++/***************************************************************************** ++* ++* Deinitializes vcos ++* ++*****************************************************************************/ ++ ++void vcos_deinit(void) ++{ ++#ifdef HAVE_VCOS_VERSION ++ vcos_cfg_remove_entry( &vcos_version_cfg ); ++#endif ++ vcos_cfg_remove_entry( &vcos_cfg_dir ); ++} ++ ++void vcos_global_lock(void) ++{ ++ down(&lock); ++} ++ ++void vcos_global_unlock(void) ++{ ++ up(&lock); ++} ++ ++/* vcos_thread_exit() doesn't really stop this thread here ++ * ++ * At the moment, call to do_exit() will leak task_struct for ++ * current thread, so we let the vcos_thread_wrapper() do the ++ * cleanup and exit job, and we return w/o actually stopping the thread. ++ * ++ * ToDo: Kernel v2.6.31 onwards, it is considered safe to call do_exit() ++ * from kthread, the implementation of which is combined in 2 patches ++ * with commit-ids "63706172" and "cdd140bd" in oss Linux kernel tree ++ */ ++ ++void vcos_thread_exit(void *arg) ++{ ++ VCOS_THREAD_T *thread = vcos_thread_current(); ++ ++ vcos_assert(thread); ++ vcos_assert(thread->magic == VCOS_THREAD_MAGIC); ++ ++ thread->exit_data = arg; ++} ++ ++void vcos_thread_attr_init(VCOS_THREAD_ATTR_T *attrs) ++{ ++ *attrs = default_attrs; ++} ++ ++void _vcos_task_timer_set(void (*pfn)(void *), void *cxt, VCOS_UNSIGNED ms) ++{ ++ VCOS_THREAD_T *self = vcos_thread_current(); ++ vcos_assert(self); ++ vcos_assert(self->_timer.pfn == NULL); ++ ++ vcos_timer_create( &self->_timer.timer, "TaskTimer", pfn, cxt ); ++ vcos_timer_set(&self->_timer.timer, ms); ++} ++ ++void _vcos_task_timer_cancel(void) ++{ ++ VCOS_THREAD_T *self = vcos_thread_current(); ++ if (self->_timer.timer.linux_timer.function) ++ { ++ vcos_timer_cancel(&self->_timer.timer); ++ vcos_timer_delete(&self->_timer.timer); ++ } ++} ++ ++int vcos_vsnprintf( char *buf, size_t buflen, const char *fmt, va_list ap ) ++{ ++ return vsnprintf( buf, buflen, fmt, ap ); ++} ++ ++int vcos_snprintf(char *buf, size_t buflen, const char *fmt, ...) ++{ ++ int ret; ++ va_list ap; ++ va_start(ap,fmt); ++ ret = vsnprintf(buf, buflen, fmt, ap); ++ va_end(ap); ++ return ret; ++} ++ ++int vcos_llthread_running(VCOS_LLTHREAD_T *t) { ++ vcos_assert(0); /* this function only exists as a nasty hack for the video codecs! */ ++ return 1; ++} ++ ++static int vcos_verify_bkpts = 1; ++ ++int vcos_verify_bkpts_enabled(void) ++{ ++ return vcos_verify_bkpts; ++} ++ ++/***************************************************************************** ++* ++* _vcos_log_platform_init is called from vcos_logging_init ++* ++*****************************************************************************/ ++ ++void _vcos_log_platform_init(void) ++{ ++ if ( vcos_cfg_mkdir( &vcos_logging_cfg_dir, &vcos_cfg_dir, "logging" ) != VCOS_SUCCESS ) ++ { ++ printk( KERN_ERR "%s: Unable to create logging cfg entry\n", __func__ ); ++ } ++} ++ ++/***************************************************************************** ++* ++* Called to display the contents of a logging category. ++* ++*****************************************************************************/ ++ ++static void logging_show_category( VCOS_CFG_BUF_T buf, void *data ) ++{ ++ VCOS_LOG_CAT_T *category = data; ++ ++ vcos_cfg_buf_printf( buf, "%s\n", vcos_log_level_to_string( category->level )); ++} ++ ++/***************************************************************************** ++* ++* Called to parse content for a logging category. ++* ++*****************************************************************************/ ++ ++static void logging_parse_category( VCOS_CFG_BUF_T buf, void *data ) ++{ ++ VCOS_LOG_CAT_T *category = data; ++ const char *str = vcos_cfg_buf_get_str( buf ); ++ VCOS_LOG_LEVEL_T level; ++ ++ if ( vcos_string_to_log_level( str, &level ) == VCOS_SUCCESS ) ++ { ++ category->level = level; ++ } ++ else ++ { ++ printk( KERN_ERR "%s: Unrecognized logging level: '%s'\n", ++ __func__, str ); ++ } ++} ++ ++/***************************************************************************** ++* ++* _vcos_log_platform_register is called from vcos_log_register whenever ++* a new category is registered. ++* ++*****************************************************************************/ ++ ++void _vcos_log_platform_register(VCOS_LOG_CAT_T *category) ++{ ++ VCOS_CFG_ENTRY_T entry; ++ ++ if ( vcos_cfg_create_entry( &entry, &vcos_logging_cfg_dir, category->name, ++ logging_show_category, logging_parse_category, ++ category ) != VCOS_SUCCESS ) ++ { ++ printk( KERN_ERR "%s: Unable to create cfg entry for logging category '%s'\n", ++ __func__, category->name ); ++ category->platform_data = NULL; ++ } ++ else ++ { ++ category->platform_data = entry; ++ } ++} ++ ++/***************************************************************************** ++* ++* _vcos_log_platform_unregister is called from vcos_log_unregister whenever ++* a new category is unregistered. ++* ++*****************************************************************************/ ++ ++void _vcos_log_platform_unregister(VCOS_LOG_CAT_T *category) ++{ ++ VCOS_CFG_ENTRY_T entry; ++ ++ entry = category->platform_data; ++ if ( entry != NULL ) ++ { ++ if ( vcos_cfg_remove_entry( &entry ) != VCOS_SUCCESS ) ++ { ++ printk( KERN_ERR "%s: Unable to remove cfg entry for logging category '%s'\n", ++ __func__, category->name ); ++ } ++ } ++} ++ ++/***************************************************************************** ++* ++* Allocate memory. ++* ++*****************************************************************************/ ++ ++void *vcos_platform_malloc( VCOS_UNSIGNED required_size ) ++{ ++ if ( required_size >= ( 2 * PAGE_SIZE )) ++ { ++ /* For larger allocations, use vmalloc, whose underlying allocator ++ * returns pages ++ */ ++ ++ return vmalloc( required_size ); ++ } ++ ++ /* For smaller allocation, use kmalloc */ ++ ++ return kmalloc( required_size, GFP_KERNEL ); ++} ++ ++/***************************************************************************** ++* ++* Free previously allocated memory ++* ++*****************************************************************************/ ++ ++void vcos_platform_free( void *ptr ) ++{ ++ if (((unsigned long)ptr >= VMALLOC_START ) ++ && ((unsigned long)ptr < VMALLOC_END )) ++ { ++ vfree( ptr ); ++ } ++ else ++ { ++ kfree( ptr ); ++ } ++} ++ ++/***************************************************************************** ++* ++* Execute a routine exactly once. ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_once(VCOS_ONCE_T *once_control, ++ void (*init_routine)(void)) ++{ ++ /* In order to be thread-safe we need to re-test *once_control ++ * inside the lock. The outer test is basically an optimization ++ * so that once it is initialized we don't need to waste time ++ * trying to acquire the lock. ++ */ ++ ++ if ( *once_control == 0 ) ++ { ++ vcos_global_lock(); ++ if ( *once_control == 0 ) ++ { ++ init_routine(); ++ *once_control = 1; ++ } ++ vcos_global_unlock(); ++ } ++ ++ return VCOS_SUCCESS; ++} ++ ++/***************************************************************************** ++* ++* String duplication routine. ++* ++*****************************************************************************/ ++ ++char *vcos_strdup(const char *str) ++{ ++ return kstrdup(str, GFP_KERNEL); ++} ++ ++ ++/* Export functions for modules to use */ ++EXPORT_SYMBOL( vcos_init ); ++ ++EXPORT_SYMBOL( vcos_semaphore_trywait ); ++EXPORT_SYMBOL( vcos_semaphore_post ); ++EXPORT_SYMBOL( vcos_semaphore_create ); ++EXPORT_SYMBOL( vcos_semaphore_wait ); ++EXPORT_SYMBOL( vcos_semaphore_delete ); ++ ++EXPORT_SYMBOL( vcos_log_impl ); ++EXPORT_SYMBOL( vcos_vlog_impl ); ++EXPORT_SYMBOL( vcos_vlog_default_impl ); ++EXPORT_SYMBOL( vcos_log_get_default_category ); ++EXPORT_SYMBOL( vcos_log_register ); ++EXPORT_SYMBOL( vcos_log_unregister ); ++EXPORT_SYMBOL( vcos_logging_init ); ++EXPORT_SYMBOL( vcos_log_level_to_string ); ++EXPORT_SYMBOL( vcos_string_to_log_level ); ++EXPORT_SYMBOL( vcos_log_dump_mem_impl ); ++ ++EXPORT_SYMBOL( vcos_event_create ); ++EXPORT_SYMBOL( vcos_event_delete ); ++EXPORT_SYMBOL( vcos_event_flags_set ); ++EXPORT_SYMBOL( vcos_event_signal ); ++EXPORT_SYMBOL( vcos_event_wait ); ++EXPORT_SYMBOL( vcos_event_try ); ++ ++EXPORT_SYMBOL( vcos_getmicrosecs ); ++ ++EXPORT_SYMBOL( vcos_strcasecmp ); ++EXPORT_SYMBOL( vcos_snprintf ); ++EXPORT_SYMBOL( vcos_vsnprintf ); ++ ++EXPORT_SYMBOL( vcos_thread_current ); ++EXPORT_SYMBOL( vcos_thread_join ); ++EXPORT_SYMBOL( vcos_thread_create ); ++EXPORT_SYMBOL( vcos_thread_set_priority ); ++EXPORT_SYMBOL( vcos_thread_exit ); ++EXPORT_SYMBOL( vcos_once ); ++ ++EXPORT_SYMBOL( vcos_thread_attr_init ); ++EXPORT_SYMBOL( vcos_thread_attr_setpriority ); ++EXPORT_SYMBOL( vcos_thread_attr_settimeslice ); ++EXPORT_SYMBOL( vcos_thread_attr_setstacksize ); ++EXPORT_SYMBOL( _vcos_thread_attr_setlegacyapi ); ++ ++EXPORT_SYMBOL( vcos_event_flags_create ); ++EXPORT_SYMBOL( vcos_event_flags_delete ); ++EXPORT_SYMBOL( vcos_event_flags_get ); ++ ++EXPORT_SYMBOL( vcos_sleep ); ++ ++EXPORT_SYMBOL( vcos_calloc ); ++EXPORT_SYMBOL( vcos_malloc ); ++EXPORT_SYMBOL( vcos_malloc_aligned ); ++EXPORT_SYMBOL( vcos_free ); ++ ++EXPORT_SYMBOL( vcos_mutex_create ); ++EXPORT_SYMBOL( vcos_mutex_delete ); ++EXPORT_SYMBOL( vcos_mutex_lock ); ++EXPORT_SYMBOL( vcos_mutex_unlock ); ++EXPORT_SYMBOL( vcos_mutex_trylock ); ++ ++EXPORT_SYMBOL( vcos_timer_cancel ); ++EXPORT_SYMBOL( vcos_timer_create ); ++EXPORT_SYMBOL( vcos_timer_delete ); ++EXPORT_SYMBOL( vcos_timer_set ); ++ ++EXPORT_SYMBOL( vcos_atomic_flags_create ); ++EXPORT_SYMBOL( vcos_atomic_flags_delete ); ++EXPORT_SYMBOL( vcos_atomic_flags_or ); ++EXPORT_SYMBOL( vcos_atomic_flags_get_and_clear ); ++ ++EXPORT_SYMBOL( vcos_verify_bkpts_enabled ); ++ ++EXPORT_SYMBOL( vcos_strdup ); +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel_cfg.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel_cfg.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel_cfg.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel_cfg.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,332 @@ ++/***************************************************************************** ++* Copyright 2009 - 2010 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include "interface/vcos/vcos.h" ++#include ++#include ++#include ++#include ++ ++struct opaque_vcos_cfg_buf_t ++{ ++ struct seq_file *seq; ++ char *charBuf; ++}; ++ ++struct opaque_vcos_cfg_entry_t ++{ ++ struct proc_dir_entry *pde; ++ struct proc_dir_entry *parent_pde; ++ VCOS_CFG_SHOW_FPTR showFunc; ++ VCOS_CFG_PARSE_FPTR parseFunc; ++ void *data; ++ const char *name; ++}; ++ ++/***************************************************************************** ++* ++* cfg_proc_show ++* ++*****************************************************************************/ ++ ++static int cfg_proc_show( struct seq_file *s, void *v ) ++{ ++ VCOS_CFG_ENTRY_T entry; ++ struct opaque_vcos_cfg_buf_t buf; ++ ++ entry = s->private; ++ ++ if ( entry->showFunc ) ++ { ++ memset( &buf, 0, sizeof( buf )); ++ buf.seq = s; ++ ++ entry->showFunc( &buf, entry->data ); ++ } ++ ++ return 0; ++} ++ ++/***************************************************************************** ++* ++* cfg_proc_write ++* ++*****************************************************************************/ ++ ++static ssize_t cfg_proc_write( struct file *file, const char __user *buffer, size_t count, loff_t *ppos) ++{ ++ VCOS_CFG_ENTRY_T entry = PDE(file->f_path.dentry->d_inode)->data; ++ char *charBuf; ++ struct opaque_vcos_cfg_buf_t buf; ++ size_t len; ++ ++ if ( entry->parseFunc != NULL ) ++ { ++ /* The number 4000 is rather arbitrary. It just needs to be bigger than any input ++ * string we expect to use. ++ */ ++ ++ len = count; ++ if ( count > 4000 ) ++ { ++ len = 4000; ++ } ++ ++ /* Allocate a kernel buffer to contain the string being written. */ ++ ++ charBuf = kmalloc( len + 1, GFP_KERNEL ); ++ if ( copy_from_user( charBuf, buffer, len )) ++ { ++ kfree( charBuf ); ++ return -EFAULT; ++ } ++ ++ /* echo puts a trailing newline in the buffer - strip it out. */ ++ ++ if (( len > 0 ) && ( charBuf[ len - 1 ] == '\n' )) ++ { ++ len--; ++ } ++ charBuf[len] = '\0'; ++ ++ memset( &buf, 0, sizeof( buf )); ++ buf.charBuf = charBuf; ++ ++ entry->parseFunc( &buf, entry->data ); ++ kfree( charBuf ); ++ } ++ return count; ++} ++ ++/***************************************************************************** ++* ++* cfg_proc_open ++* ++*****************************************************************************/ ++ ++static int cfg_proc_open( struct inode *inode, struct file *file ) ++{ ++ return single_open( file, cfg_proc_show, PDE(inode)->data ); ++} ++ ++static const struct file_operations cfg_proc_fops = ++{ ++ .open = cfg_proc_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++ .write = cfg_proc_write, ++}; ++ ++/***************************************************************************** ++* ++* vcos_cfg_mkdir ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_cfg_mkdir( VCOS_CFG_ENTRY_T *entryp, ++ VCOS_CFG_ENTRY_T *parent, ++ const char *dirName ) ++{ ++ VCOS_CFG_ENTRY_T entry; ++ ++ if (( entry = kzalloc( sizeof( *entry ), GFP_KERNEL )) == NULL ) ++ { ++ return VCOS_ENOMEM; ++ } ++ ++ if ( parent == NULL ) ++ { ++ entry->pde = proc_mkdir( dirName, NULL ); ++ } ++ else ++ { ++ entry->pde = proc_mkdir( dirName, (*parent)->pde ); ++ entry->parent_pde = (*parent)->pde; ++ } ++ if ( entry->pde == NULL ) ++ { ++ kfree( entry ); ++ return VCOS_ENOMEM; ++ } ++ ++ entry->name = dirName; ++ ++ *entryp = entry; ++ return VCOS_SUCCESS; ++} ++ ++/***************************************************************************** ++* ++* vcos_cfg_create_entry ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_cfg_create_entry( VCOS_CFG_ENTRY_T *entryp, ++ VCOS_CFG_ENTRY_T *parent, ++ const char *entryName, ++ VCOS_CFG_SHOW_FPTR showFunc, ++ VCOS_CFG_PARSE_FPTR parseFunc, ++ void *data ) ++{ ++ VCOS_CFG_ENTRY_T entry; ++ mode_t mode; ++ ++ *entryp = NULL; ++ ++ if (( entry = kzalloc( sizeof( *entry ), GFP_KERNEL )) == NULL ) ++ { ++ return VCOS_ENOMEM; ++ } ++ ++ mode = 0; ++ if ( showFunc != NULL ) ++ { ++ mode |= 0444; ++ } ++ if ( parseFunc != NULL ) ++ { ++ mode |= 0200; ++ } ++ ++ if ( parent == NULL ) ++ { ++ entry->pde = create_proc_entry( entryName, mode, NULL ); ++ } ++ else ++ { ++ entry->pde = create_proc_entry( entryName, mode, (*parent)->pde ); ++ entry->parent_pde = (*parent)->pde; ++ } ++ if ( entry->pde == NULL ) ++ { ++ kfree( entry ); ++ return -ENOMEM; ++ } ++ entry->showFunc = showFunc; ++ entry->parseFunc = parseFunc; ++ entry->data = data; ++ entry->name = entryName; ++ ++ entry->pde->data = entry; ++ entry->pde->proc_fops = &cfg_proc_fops; ++ ++ *entryp = entry; ++ return VCOS_SUCCESS; ++} ++ ++/***************************************************************************** ++* ++* vcos_cfg_remove_entry ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_cfg_remove_entry( VCOS_CFG_ENTRY_T *entryp ) ++{ ++ if (( entryp != NULL ) && ( *entryp != NULL )) ++ { ++ remove_proc_entry( (*entryp)->name, (*entryp)->parent_pde ); ++ ++ kfree( *entryp ); ++ *entryp = NULL; ++ } ++ ++ return VCOS_SUCCESS; ++} ++ ++/***************************************************************************** ++* ++* vcos_cfg_is_entry_created ++* ++*****************************************************************************/ ++ ++int vcos_cfg_is_entry_created( VCOS_CFG_ENTRY_T entry ) ++{ ++ return ( entry != NULL ) && ( entry->pde != NULL ); ++} ++ ++/***************************************************************************** ++* ++* vcos_cfg_buf_printf ++* ++*****************************************************************************/ ++ ++void vcos_cfg_buf_printf( VCOS_CFG_BUF_T buf, const char *fmt, ... ) ++{ ++ struct seq_file *m = buf->seq; ++ ++ /* Bah - there is no seq_vprintf */ ++ ++ va_list args; ++ int len; ++ ++ if (m->count < m->size) { ++ va_start(args, fmt); ++ len = vsnprintf(m->buf + m->count, m->size - m->count, fmt, args); ++ va_end(args); ++ if (m->count + len < m->size) { ++ m->count += len; ++ return; ++ } ++ } ++ m->count = m->size; ++} ++ ++/***************************************************************************** ++* ++* vcos_cfg_buf_get_str ++* ++*****************************************************************************/ ++ ++char *vcos_cfg_buf_get_str( VCOS_CFG_BUF_T buf ) ++{ ++ return buf->charBuf; ++} ++ ++/***************************************************************************** ++* ++* vcos_cfg_get_proc_entry ++* ++* This function is only created for a couple of backwards compatibility ' ++* issues and shouldn't normally be used. ++* ++*****************************************************************************/ ++ ++void *vcos_cfg_get_proc_entry( VCOS_CFG_ENTRY_T entry ) ++{ ++ return entry->pde; ++} ++ ++/***************************************************************************** ++* ++* vcos_cfg_get_entry_name ++* ++*****************************************************************************/ ++ ++const char *vcos_cfg_get_entry_name( VCOS_CFG_ENTRY_T entry ) ++{ ++ return entry->pde->name; ++} ++ ++ ++EXPORT_SYMBOL( vcos_cfg_mkdir ); ++EXPORT_SYMBOL( vcos_cfg_create_entry ); ++EXPORT_SYMBOL( vcos_cfg_remove_entry ); ++EXPORT_SYMBOL( vcos_cfg_get_entry_name ); ++EXPORT_SYMBOL( vcos_cfg_is_entry_created ); ++EXPORT_SYMBOL( vcos_cfg_buf_printf ); ++EXPORT_SYMBOL( vcos_cfg_buf_get_str ); ++ ++EXPORT_SYMBOL_GPL( vcos_cfg_get_proc_entry ); ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel_misc.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel_misc.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel_misc.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_linuxkernel_misc.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,111 @@ ++/***************************************************************************** ++* Copyright 2009 - 2010 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include "interface/vcos/vcos.h" ++#include ++#include ++#include ++#include ++#include ++ ++/***************************************************************************** ++* ++* vcos_semaphore_wait_freezable ++* ++*****************************************************************************/ ++ ++VCOS_STATUS_T vcos_semaphore_wait_freezable(VCOS_SEMAPHORE_T *sem) ++{ ++ int rval, sig_pended = 0; ++ unsigned long flags; ++ struct task_struct *task = current; ++ ++ while (1) { ++ rval = down_interruptible((struct semaphore *)sem); ++ if (rval == 0) { /* down now */ ++ break; ++ } else { ++ if (freezing(current)) { ++ try_to_freeze(); ++ } else { ++ spin_lock_irqsave(&task->sighand->siglock, flags); ++ if (test_tsk_thread_flag(task, TIF_SIGPENDING)) { ++ clear_tsk_thread_flag(task, TIF_SIGPENDING); ++ sig_pended = 1; ++ } ++ spin_unlock_irqrestore(&task->sighand->siglock, flags); ++ } ++ } ++ } ++ ++ if (sig_pended) { ++ spin_lock_irqsave(&task->sighand->siglock, flags); ++ set_tsk_thread_flag(task, TIF_SIGPENDING); ++ spin_unlock_irqrestore(&task->sighand->siglock, flags); ++ } ++ ++ return 0; ++} ++ ++EXPORT_SYMBOL( vcos_semaphore_wait_freezable ); ++ ++/***************************************************************************** ++* ++* vcos_kmalloc ++* ++* We really need to convert malloc to do kmalloc or vmalloc based on the ++* size, but for now we'll add a separate function. ++* ++*****************************************************************************/ ++ ++void *vcos_kmalloc(VCOS_UNSIGNED size, const char *description) ++{ ++ (void)description; ++ ++ return kmalloc( size, GFP_KERNEL ); ++} ++ ++/***************************************************************************** ++* ++* vcos_kmalloc ++* ++* We really need to convert malloc to do kmalloc or vmalloc based on the ++* size, but for now we'll add a separate function. ++* ++*****************************************************************************/ ++ ++void *vcos_kcalloc(VCOS_UNSIGNED num, VCOS_UNSIGNED size, const char *description) ++{ ++ (void)description; ++ ++ return kzalloc( num * size, GFP_KERNEL ); ++} ++ ++/***************************************************************************** ++* ++* vcos_kfree ++* ++*****************************************************************************/ ++ ++void vcos_kfree(void *ptr) ++{ ++ kfree( ptr ); ++} ++ ++EXPORT_SYMBOL( vcos_kmalloc ); ++EXPORT_SYMBOL( vcos_kcalloc ); ++EXPORT_SYMBOL( vcos_kfree ); ++ ++// END ######################################################################### ++// ############################################################################# +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_mod_init.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_mod_init.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_mod_init.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_mod_init.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,64 @@ ++/***************************************************************************** ++* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++****************************************************************************/ ++ ++/* ---- Include Files ---------------------------------------------------- */ ++ ++#include "interface/vcos/vcos.h" ++#include ++ ++/* ---- Public Variables ------------------------------------------------- */ ++ ++/* ---- Private Constants and Types -------------------------------------- */ ++ ++/* ---- Private Variables ------------------------------------------------ */ ++ ++/* ---- Private Function Prototypes -------------------------------------- */ ++ ++/* ---- Functions -------------------------------------------------------- */ ++ ++/**************************************************************************** ++* ++* Called to perform module initialization when the module is loaded ++* ++***************************************************************************/ ++ ++static int __init vcos_mod_init( void ) ++{ ++ printk( KERN_INFO "VCOS Module\n" ); ++ ++ vcos_init(); ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* Called to perform module cleanup when the module is unloaded. ++* ++***************************************************************************/ ++ ++static void __exit vcos_mod_exit( void ) ++{ ++ vcos_deinit(); ++} ++ ++/****************************************************************************/ ++ ++module_init( vcos_mod_init ); ++module_exit( vcos_mod_exit ); ++ ++MODULE_AUTHOR("Broadcom"); ++MODULE_DESCRIPTION( "VCOS Module Functions" ); ++MODULE_LICENSE( "GPL" ); ++MODULE_VERSION( "1.0" ); ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_platform.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_platform.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_platform.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_platform.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,507 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - Linux kernel (partial) implementation. ++=============================================================================*/ ++ ++/* Do not include this file directly - instead include it via vcos.h */ ++ ++/** @file ++ * ++ * Linux kernel (partial) implementation of VCOS. ++ * ++ */ ++ ++#ifndef VCOS_PLATFORM_H ++#define VCOS_PLATFORM_H ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include /* for time_t */ ++#include ++#include ++ ++#define VCOS_HAVE_RTOS 1 ++#define VCOS_HAVE_SEMAPHORE 1 ++#define VCOS_HAVE_EVENT 1 ++#define VCOS_HAVE_QUEUE 0 ++#define VCOS_HAVE_LEGACY_ISR 0 ++#define VCOS_HAVE_TIMER 1 ++#define VCOS_HAVE_CANCELLATION_SAFE_TIMER 0 ++#define VCOS_HAVE_MEMPOOL 0 ++#define VCOS_HAVE_ISR 0 ++#define VCOS_HAVE_ATOMIC_FLAGS 1 ++#define VCOS_HAVE_BLOCK_POOL 0 ++#define VCOS_HAVE_ONCE 1 ++#define VCOS_HAVE_FILE 0 ++#define VCOS_HAVE_USER_BUF 0 ++#define VCOS_HAVE_CFG 1 ++#define VCOS_HAVE_SPINLOCK 0 ++#define VCOS_HAVE_CMD 1 ++#define VCOS_HAVE_EVENT_FLAGS 1 ++ ++/* Exclude many VCOS classes which don't have predicates */ ++#define VCOS_TLS_H ++#define VCOS_NAMED_MUTEX_H ++#define VCOS_REENTRANT_MUTEX_H ++#define VCOS_NAMED_SEMAPHORE_H ++#define VCOS_QUICKSLOW_MUTEX_H ++/*#define VCOS_INIT_H */ ++/*#define VCOS_MEM_H */ ++/*#define VCOS_STRING_H */ ++ ++typedef struct semaphore VCOS_SEMAPHORE_T; ++typedef struct semaphore VCOS_EVENT_T; ++typedef struct mutex VCOS_MUTEX_T; ++typedef volatile int VCOS_ONCE_T; ++ ++typedef unsigned int VCOS_UNSIGNED; ++typedef unsigned int VCOS_OPTION; ++typedef atomic_t VCOS_ATOMIC_FLAGS_T; ++ ++typedef struct ++{ ++ struct timer_list linux_timer; ++ void *context; ++ void (*expiration_routine)(void *context); ++ ++} VCOS_TIMER_T; ++ ++typedef struct VCOS_LLTHREAD_T ++{ ++ struct task_struct *thread; /**< The thread itself */ ++ VCOS_SEMAPHORE_T suspend; /**< For support event groups and similar - a per thread semaphore */ ++} VCOS_LLTHREAD_T; ++ ++typedef enum ++{ ++ VCOS_O_RDONLY = 00000000, ++ VCOS_O_WRONLY = 00000001, ++ VCOS_O_RDWR = 00000002, ++ VCOS_O_TRUNC = 00001000, ++} VCOS_FILE_FLAGS_T; ++ ++typedef struct file *VCOS_FILE_T; ++ ++#define VCOS_SUSPEND -1 ++#define VCOS_NO_SUSPEND 0 ++ ++#define VCOS_START 1 ++#define VCOS_NO_START 0 ++ ++#define VCOS_THREAD_PRI_MIN -20 ++#define VCOS_THREAD_PRI_MAX 19 ++ ++#define VCOS_THREAD_PRI_INCREASE -1 ++#define VCOS_THREAD_PRI_HIGHEST VCOS_THREAD_PRI_MIN ++#define VCOS_THREAD_PRI_LOWEST VCOS_THREAD_PRI_MAX ++#define VCOS_THREAD_PRI_NORMAL ((VCOS_THREAD_PRI_MAX+VCOS_THREAD_PRI_MIN)/2) ++#define VCOS_THREAD_PRI_ABOVE_NORMAL (VCOS_THREAD_PRI_NORMAL + VCOS_THREAD_PRI_INCREASE) ++#define VCOS_THREAD_PRI_REALTIME VCOS_THREAD_PRI_HIGHEST ++ ++#define _VCOS_AFFINITY_DEFAULT 0 ++#define _VCOS_AFFINITY_CPU0 0 ++#define _VCOS_AFFINITY_CPU1 0 ++#define _VCOS_AFFINITY_MASK 0 ++#define VCOS_CAN_SET_STACK_ADDR 0 ++ ++#define VCOS_TICKS_PER_SECOND HZ ++ ++#include "interface/vcos/generic/vcos_generic_event_flags.h" ++#include "interface/vcos/generic/vcos_mem_from_malloc.h" ++#include "interface/vcos/generic/vcos_joinable_thread_from_plain.h" ++ ++/*********************************************************** ++ * ++ * Memory allcoation ++ * ++ ***********************************************************/ ++ ++#define _vcos_platform_malloc vcos_platform_malloc ++#define _vcos_platform_free vcos_platform_free ++ ++void *vcos_platform_malloc( VCOS_UNSIGNED required_size ); ++void vcos_platform_free( void *ptr ); ++ ++#if defined(VCOS_INLINE_BODIES) ++ ++#undef VCOS_ASSERT_LOGGING_DISABLE ++#define VCOS_ASSERT_LOGGING_DISABLE 1 ++ ++/*********************************************************** ++ * ++ * Counted Semaphores ++ * ++ ***********************************************************/ ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_semaphore_wait(VCOS_SEMAPHORE_T *sem) { ++ int ret = down_interruptible(sem); ++ if ( ret == 0 ) ++ /* Success */ ++ return VCOS_SUCCESS; ++ else if ( ret == -EINTR ) ++ /* Interrupted */ ++ return VCOS_EINTR; ++ else ++ /* Default (timeout) */ ++ return VCOS_EAGAIN; ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_semaphore_trywait(VCOS_SEMAPHORE_T *sem) { ++ if (down_trylock(sem) != 0) ++ return VCOS_EAGAIN; ++ return VCOS_SUCCESS; ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_semaphore_create(VCOS_SEMAPHORE_T *sem, ++ const char *name, ++ VCOS_UNSIGNED initial_count) { ++ sema_init(sem, initial_count); ++ return VCOS_SUCCESS; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_semaphore_delete(VCOS_SEMAPHORE_T *sem) { ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_semaphore_post(VCOS_SEMAPHORE_T *sem) { ++ up(sem); ++ return VCOS_SUCCESS; ++} ++ ++/*********************************************************** ++ * ++ * Threads ++ * ++ ***********************************************************/ ++ ++#include "vcos_thread_map.h" ++ ++VCOS_INLINE_IMPL ++VCOS_LLTHREAD_T *vcos_llthread_current(void) { ++ return &vcos_kthread_current()->thread; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_llthread_resume(VCOS_LLTHREAD_T *thread) { ++ vcos_assert(0); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_sleep(uint32_t ms) { ++ msleep(ms); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_thread_set_priority(VCOS_THREAD_T *thread, VCOS_UNSIGNED p) { ++ /* not implemented */ ++} ++VCOS_INLINE_IMPL ++VCOS_UNSIGNED vcos_thread_get_priority(VCOS_THREAD_T *thread) { ++ /* not implemented */ ++ return 0; ++} ++ ++/*********************************************************** ++ * ++ * Miscellaneous ++ * ++ ***********************************************************/ ++ ++VCOS_INLINE_IMPL ++int vcos_strcasecmp(const char *s1, const char *s2) { ++ return strcasecmp(s1,s2); ++} ++ ++ ++/*********************************************************** ++ * ++ * Mutexes ++ * ++ ***********************************************************/ ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_mutex_create(VCOS_MUTEX_T *m, const char *name) { ++ mutex_init(m); ++ return VCOS_SUCCESS; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_mutex_delete(VCOS_MUTEX_T *m) { ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_mutex_lock(VCOS_MUTEX_T *m) { ++ int ret = mutex_lock_interruptible(m); ++ if ( ret == 0 ) ++ /* Success */ ++ return VCOS_SUCCESS; ++ else if ( ret == -EINTR ) ++ /* Interrupted */ ++ return VCOS_EINTR; ++ else ++ /* Default */ ++ return VCOS_EAGAIN; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_mutex_unlock(VCOS_MUTEX_T *m) { ++ mutex_unlock(m); ++} ++ ++VCOS_INLINE_IMPL ++int vcos_mutex_is_locked(VCOS_MUTEX_T *m) { ++ if (mutex_trylock(m) != 0) ++ return 1; /* it was locked */ ++ mutex_unlock(m); ++ /* it wasn't locked */ ++ return 0; ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_mutex_trylock(VCOS_MUTEX_T *m) { ++ if (mutex_trylock(m) == 0) ++ return VCOS_SUCCESS; ++ else ++ return VCOS_EAGAIN; ++} ++ ++/* For supporting event groups - per thread semaphore */ ++VCOS_INLINE_IMPL ++void _vcos_thread_sem_wait(void) { ++ VCOS_THREAD_T *t = vcos_thread_current(); ++ vcos_semaphore_wait(&t->suspend); ++} ++ ++VCOS_INLINE_IMPL ++void _vcos_thread_sem_post(VCOS_THREAD_T *target) { ++ vcos_semaphore_post(&target->suspend); ++} ++ ++/*********************************************************** ++ * ++ * Events ++ * ++ ***********************************************************/ ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_event_create(VCOS_EVENT_T *event, const char *debug_name) ++{ ++ sema_init(event, 0); ++ return VCOS_SUCCESS; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_event_signal(VCOS_EVENT_T *event) ++{ ++ up(event); ++} ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_event_wait(VCOS_EVENT_T *event) ++{ ++ int ret = down_interruptible(event); ++ if ( ret == -EINTR ) ++ /* Interrupted */ ++ return VCOS_EINTR; ++ else if (ret != 0) ++ /* Default (timeout) */ ++ return VCOS_EAGAIN; ++ /* Emulate a maximum count of 1 by removing any extra upness */ ++ while (down_trylock(event) == 0) continue; ++ return VCOS_SUCCESS; ++} ++ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_event_try(VCOS_EVENT_T *event) ++{ ++ return (down_trylock(event) == 0) ? VCOS_SUCCESS : VCOS_EAGAIN; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_event_delete(VCOS_EVENT_T *event) ++{ ++} ++ ++/*********************************************************** ++ * ++ * Timers ++ * ++ ***********************************************************/ ++ ++VCOS_INLINE_DECL ++void vcos_timer_linux_func(unsigned long data) ++{ ++ VCOS_TIMER_T *vcos_timer = (VCOS_TIMER_T *)data; ++ ++ vcos_timer->expiration_routine( vcos_timer->context ); ++} ++ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_timer_create(VCOS_TIMER_T *timer, ++ const char *name, ++ void (*expiration_routine)(void *context), ++ void *context) { ++ init_timer(&timer->linux_timer); ++ timer->linux_timer.data = (unsigned long)timer; ++ timer->linux_timer.function = vcos_timer_linux_func; ++ ++ timer->context = context; ++ timer->expiration_routine = expiration_routine; ++ ++ return VCOS_SUCCESS; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_timer_set(VCOS_TIMER_T *timer, VCOS_UNSIGNED delay_ms) { ++ timer->linux_timer.expires = jiffies + msecs_to_jiffies(delay_ms); ++ add_timer(&timer->linux_timer); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_timer_cancel(VCOS_TIMER_T *timer) { ++ del_timer(&timer->linux_timer); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_timer_reset(VCOS_TIMER_T *timer, VCOS_UNSIGNED delay_ms) { ++ del_timer_sync(&timer->linux_timer); ++ timer->linux_timer.expires = jiffies + msecs_to_jiffies(delay_ms); ++ add_timer(&timer->linux_timer); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_timer_delete(VCOS_TIMER_T *timer) { ++ timer->context = NULL; ++ timer->expiration_routine = NULL; ++ timer->linux_timer.function = NULL; ++ timer->linux_timer.data = 0; ++ return; ++} ++ ++VCOS_INLINE_IMPL ++VCOS_UNSIGNED vcos_process_id_current(void) { ++ return (VCOS_UNSIGNED)current->pid; ++} ++ ++ ++VCOS_INLINE_IMPL ++int vcos_in_interrupt(void) { ++ return in_interrupt(); ++} ++ ++/*********************************************************** ++ * ++ * Atomic flags ++ * ++ ***********************************************************/ ++ ++VCOS_INLINE_IMPL ++VCOS_STATUS_T vcos_atomic_flags_create(VCOS_ATOMIC_FLAGS_T *atomic_flags) ++{ ++ atomic_set(atomic_flags, 0); ++ return VCOS_SUCCESS; ++} ++ ++VCOS_INLINE_IMPL ++void vcos_atomic_flags_or(VCOS_ATOMIC_FLAGS_T *atomic_flags, uint32_t flags) ++{ ++ uint32_t value; ++ do { ++ value = atomic_read(atomic_flags); ++ } while (atomic_cmpxchg(atomic_flags, value, value | flags) != value); ++} ++ ++VCOS_INLINE_IMPL ++uint32_t vcos_atomic_flags_get_and_clear(VCOS_ATOMIC_FLAGS_T *atomic_flags) ++{ ++ return atomic_xchg(atomic_flags, 0); ++} ++ ++VCOS_INLINE_IMPL ++void vcos_atomic_flags_delete(VCOS_ATOMIC_FLAGS_T *atomic_flags) ++{ ++} ++ ++#undef VCOS_ASSERT_LOGGING_DISABLE ++#define VCOS_ASSERT_LOGGING_DISABLE 0 ++ ++#endif /* VCOS_INLINE_BODIES */ ++ ++VCOS_INLINE_DECL void _vcos_thread_sem_wait(void); ++VCOS_INLINE_DECL void _vcos_thread_sem_post(VCOS_THREAD_T *); ++ ++/*********************************************************** ++ * ++ * Misc ++ * ++ ***********************************************************/ ++VCOS_INLINE_DECL char *vcos_strdup(const char *str); ++ ++/*********************************************************** ++ * ++ * Logging ++ * ++ ***********************************************************/ ++ ++VCOSPRE_ const char * VCOSPOST_ _vcos_log_level(void); ++#define _VCOS_LOG_LEVEL() _vcos_log_level() ++ ++#define vcos_log_platform_init() _vcos_log_platform_init() ++#define vcos_log_platform_register(category) _vcos_log_platform_register(category) ++#define vcos_log_platform_unregister(category) _vcos_log_platform_unregister(category) ++ ++struct VCOS_LOG_CAT_T; /* Forward declaration since vcos_logging.h hasn't been included yet */ ++ ++void _vcos_log_platform_init(void); ++void _vcos_log_platform_register(struct VCOS_LOG_CAT_T *category); ++void _vcos_log_platform_unregister(struct VCOS_LOG_CAT_T *category); ++ ++/*********************************************************** ++ * ++ * Memory barriers ++ * ++ ***********************************************************/ ++ ++#define vcos_wmb(x) wmb() ++#define vcos_rmb() rmb() ++ ++#include "interface/vcos/generic/vcos_common.h" ++/*#include "interface/vcos/generic/vcos_generic_quickslow_mutex.h" */ ++ ++#endif /* VCOS_PLATFORM_H */ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_platform_types.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_platform_types.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_platform_types.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_platform_types.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,59 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - platform-specific types and defines ++=============================================================================*/ ++ ++#ifndef VCOS_PLATFORM_TYPES_H ++#define VCOS_PLATFORM_TYPES_H ++ ++#include ++#include ++#include ++#include ++ ++#define VCOSPRE_ extern ++#define VCOSPOST_ ++ ++#if defined(__GNUC__) && (( __GNUC__ > 2 ) || (( __GNUC__ == 2 ) && ( __GNUC_MINOR__ >= 3 ))) ++#define VCOS_FORMAT_ATTR_(ARCHETYPE, STRING_INDEX, FIRST_TO_CHECK) __attribute__ ((format (ARCHETYPE, STRING_INDEX, FIRST_TO_CHECK))) ++#else ++#define VCOS_FORMAT_ATTR_(ARCHETYPE, STRING_INDEX, FIRST_TO_CHECK) ++#endif ++ ++#if !defined( __STDC_VERSION__ ) ++#define __STDC_VERSION__ 199901L ++#endif ++ ++#if !defined( __STDC_VERSION ) ++#define __STDC_VERSION __STDC_VERSION__ ++#endif ++ ++static inline void __vcos_bkpt( void ) { BUG(); } ++#define VCOS_BKPT __vcos_bkpt() ++ ++#define VCOS_ASSERT_MSG(...) printk( KERN_ERR "vcos_assert: " __VA_ARGS__ ) ++ ++#define PRId64 "lld" ++#define PRIi64 "lli" ++#define PRIo64 "llo" ++#define PRIu64 "llu" ++#define PRIx64 "llx" ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_thread_map.c bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_thread_map.c +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_thread_map.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_thread_map.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,129 @@ ++/***************************************************************************** ++* Copyright 2009 - 2010 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/** Support to allow VCOS thread-related functions to be called from ++ * threads that were not created by VCOS. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include "vcos_thread_map.h" ++#include "interface/vcos/vcos_logging.h" ++ ++/* ++ * Store the vcos_thread pointer at the end of ++ * current kthread stack, right after the thread_info ++ * structure. ++ * ++ * I belive we should be safe here to steal these 4 bytes ++ * from the stack, as long as the vcos thread does not use up ++ * all the stack available ++ * ++ * NOTE: This scheme will not work on architectures with stack growing up ++ */ ++ ++/* Shout, if we are not being compiled for ARM kernel */ ++ ++#ifndef CONFIG_ARM ++#error " **** The vcos kthread implementation may not work for non-ARM kernel ****" ++#endif ++ ++static inline void *to_current_vcos_thread(void) ++{ ++ unsigned long *vcos_data; ++ ++ vcos_data = (unsigned long *)((char *)current_thread_info() + sizeof(struct thread_info)); ++ ++ return (void *)vcos_data; ++} ++ ++ ++static inline void *to_vcos_thread(struct task_struct *tsk) ++{ ++ unsigned long *vcos_data; ++ ++ vcos_data = (unsigned long *)((char *)tsk->stack + sizeof(struct thread_info)); ++ ++ return (void *)vcos_data; ++} ++ ++/** ++ @fn uint32_t vcos_add_thread(THREAD_MAP_T *vcos_thread); ++*/ ++uint32_t vcos_add_thread(VCOS_THREAD_T *vcos_thread) ++{ ++ VCOS_THREAD_T **vcos_thread_storage = (VCOS_THREAD_T **)to_current_vcos_thread(); ++ ++ *vcos_thread_storage = vcos_thread; ++ ++ return(0); ++} ++ ++ ++/** ++ @fn uint32_t vcos_remove_thread(struct task_struct * thread_id); ++*/ ++uint32_t vcos_remove_thread(struct task_struct *thread_id) ++{ ++ /* Remove thread_id -> VCOS_THREAD_T relationship */ ++ VCOS_THREAD_T **vcos_thread_storage; ++ ++ /* ++ * We want to be able to build vcos as a loadable module, which ++ * means that we can't call get_task_struct. So we assert if we're ++ * ever called with thread_id != current. ++ */ ++ ++ BUG_ON( thread_id != current ); ++ ++ vcos_thread_storage = (VCOS_THREAD_T **)to_vcos_thread(thread_id); ++ ++ *(unsigned long *)vcos_thread_storage = 0xCAFEBABE; ++ ++ return(0); ++} ++ ++ ++VCOS_THREAD_T *vcos_kthread_current(void) ++{ ++ VCOS_THREAD_T **vcos_thread_storage = (VCOS_THREAD_T **)to_current_vcos_thread(); ++ ++ /* If we find this, either the thread is already dead or stack pages of a ++ * dead vcos thread are re-allocated to this one. ++ * ++ * Since there's no way to differentiate between these 2 cases, we just dump ++ * the current task name to the log. ++ * ++ * If the current thread is created using VCOS API, you should *never* see this ++ * print. ++ * ++ * If its a non-VCOS thread, just let it go ... ++ * ++ * To debug VCOS, uncomment printk's under the "if" condition below ++ * ++ */ ++ if (*vcos_thread_storage == (void *)0xCAFEBABE) ++ { ++ #if 0 ++ printk(KERN_DEBUG"****************************************************\n"); ++ printk(KERN_DEBUG"%s : You have a problem, if \"%s\" is a VCOS thread\n",__func__, current->comm); ++ printk(KERN_DEBUG"****************************************************\n"); ++ #endif ++ } ++ ++ return *vcos_thread_storage; ++} +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_thread_map.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_thread_map.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_thread_map.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/linuxkernel/vcos_thread_map.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,39 @@ ++/***************************************************************************** ++* Copyright 2009 - 2010 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++ ++#ifndef VCOS_THREAD_MAP_H ++#define VCOS_THREAD_MAP_H ++ ++#include ++ ++#include "vcos_platform.h" ++ ++static inline void vcos_thread_map_init(void) ++{ ++ return; ++} ++ ++static inline void vcos_thread_map_cleanup(void) ++{ ++ return; ++} ++ ++uint32_t vcos_add_thread(VCOS_THREAD_T *vcos_thread); ++ ++uint32_t vcos_remove_thread(struct task_struct *thread_id); ++ ++VCOS_THREAD_T *vcos_kthread_current(void); ++ ++#endif /*VCOS_THREAD_MAP_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_assert.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_assert.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_assert.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_assert.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,280 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - Assertion and error-handling macros. ++=============================================================================*/ ++ ++ ++#ifndef VCOS_ASSERT_H ++#define VCOS_ASSERT_H ++ ++/* ++ * Macro: ++ * vcos_assert(cond) ++ * vcos_assert_msg(cond, fmt, ...) ++ * Use: ++ * Detecting programming errors by ensuring that assumptions are correct. ++ * On failure: ++ * Performs a platform-dependent "breakpoint", usually with an assert-style ++ * message. The '_msg' variant expects a printf-style format string and ++ * parameters. ++ * If a failure is detected, the code should be fixed and rebuilt. ++ * In release builds: ++ * Generates no code, i.e. does not evaluate 'cond'. ++ * Returns: ++ * Nothing. ++ * ++ * Macro: ++ * vcos_demand(cond) ++ * vcos_demand_msg(cond, fmt, ...) ++ * Use: ++ * Detecting fatal system errors that require a reboot. ++ * On failure: ++ * Performs a platform-dependent "breakpoint", usually with an assert-style ++ * message, then calls vcos_abort (see below). ++ * In release builds: ++ * Calls vcos_abort() if 'cond' is false. ++ * Returns: ++ * Nothing (never, on failure). ++ * ++ * Macro: ++ * vcos_verify(cond) ++ * vcos_verify_msg(cond, fmt, ...) ++ * Use: ++ * Detecting run-time errors and interesting conditions, normally within an ++ * 'if' statement to catch the failures, i.e. ++ * if (!vcos_verify(cond)) handle_error(); ++ * On failure: ++ * Generates a message and optionally stops at a platform-dependent ++ * "breakpoint" (usually disabled). See vcos_verify_bkpts_enable below. ++ * In release builds: ++ * Just evaluates and returns 'cond'. ++ * Returns: ++ * Non-zero if 'cond' is true, otherwise zero. ++ * ++ * Macro: ++ * vcos_static_assert(cond) ++ * Use: ++ * Detecting compile-time errors. ++ * On failure: ++ * Generates a compiler error. ++ * In release builds: ++ * Generates a compiler error. ++ * ++ * Function: ++ * void vcos_abort(void) ++ * Use: ++ * Invokes the fatal error handling mechanism, alerting the host where ++ * applicable. ++ * Returns: ++ * Never. ++ * ++ * Macro: ++ * VCOS_VERIFY_BKPTS ++ * Use: ++ * Define in a module (before including vcos.h) to specify an alternative ++ * flag to control breakpoints on vcos_verify() failures. ++ * Returns: ++ * Non-zero values enable breakpoints. ++ * ++ * Function: ++ * int vcos_verify_bkpts_enable(int enable); ++ * Use: ++ * Sets the global flag controlling breakpoints on vcos_verify failures, ++ * enabling the breakpoints iff 'enable' is non-zero. ++ * Returns: ++ * The previous state of the flag. ++ * ++ * Function: ++ * int vcos_verify_bkpts_enabled(void); ++ * Use: ++ * Queries the state of the global flag enabling breakpoints on vcos_verify ++ * failures. ++ * Returns: ++ * The current state of the flag. ++ * ++ * Examples: ++ * ++ * int my_breakpoint_enable_flag = 1; ++ * ++ * #define VCOS_VERIFY_BKPTS my_breakpoint_enable_flag ++ * ++ * #include "interface/vcos/vcos.h" ++ * ++ * vcos_static_assert((sizeof(object) % 32) == 0); ++ * ++ * // ... ++ * ++ * vcos_assert_msg(postcondition_is_true, "Coding error"); ++ * ++ * if (!vcos_verify_msg(buf, "Buffer allocation failed (%d bytes)", size)) ++ * { ++ * // Tidy up ++ * // ... ++ * return OUT_OF_MEMORY; ++ * } ++ * ++ * vcos_demand(*p++==GUARDWORDHEAP); ++ */ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++ ++#ifdef __COVERITY__ ++#undef VCOS_ASSERT_BKPT ++#define VCOS_ASSERT_BKPT __coverity_panic__() ++#endif ++ ++#ifndef VCOS_VERIFY_BKPTS ++#define VCOS_VERIFY_BKPTS vcos_verify_bkpts_enabled() ++#endif ++ ++#ifndef VCOS_BKPT ++#if defined(__VIDEOCORE__) && !defined(VCOS_ASSERT_NO_BKPTS) ++#define VCOS_BKPT _bkpt() ++#else ++#define VCOS_BKPT (void )0 ++#endif ++#endif ++ ++#ifndef VCOS_ASSERT_BKPT ++#define VCOS_ASSERT_BKPT VCOS_BKPT ++#endif ++ ++#ifndef VCOS_VERIFY_BKPT ++#define VCOS_VERIFY_BKPT (VCOS_VERIFY_BKPTS ? VCOS_BKPT : (void)0) ++#endif ++ ++VCOSPRE_ int VCOSPOST_ vcos_verify_bkpts_enabled(void); ++VCOSPRE_ int VCOSPOST_ vcos_verify_bkpts_enable(int enable); ++VCOSPRE_ void VCOSPOST_ vcos_abort(void); ++ ++#ifndef VCOS_ASSERT_MSG ++#ifdef LOGGING ++extern void logging_assert(const char *file, const char *func, int line, const char *format, ...); ++#define VCOS_ASSERT_MSG(...) ((VCOS_ASSERT_LOGGING && !VCOS_ASSERT_LOGGING_DISABLE) ? logging_assert(__FILE__, __func__, __LINE__, __VA_ARGS__) : (void)0) ++#else ++#define VCOS_ASSERT_MSG(...) ((void)0) ++#endif ++#endif ++ ++#ifndef VCOS_VERIFY_MSG ++#define VCOS_VERIFY_MSG(...) VCOS_ASSERT_MSG(__VA_ARGS__) ++#endif ++ ++#ifndef VCOS_ASSERT_LOGGING ++#define VCOS_ASSERT_LOGGING 0 ++#endif ++ ++#ifndef VCOS_ASSERT_LOGGING_DISABLE ++#define VCOS_ASSERT_LOGGING_DISABLE 0 ++#endif ++ ++#if !defined(NDEBUG) || defined(VCOS_RELEASE_ASSERTS) ++ ++#ifndef vcos_assert ++#define vcos_assert(cond) \ ++ ( (cond) ? (void)0 : (VCOS_ASSERT_MSG("%s", #cond), VCOS_ASSERT_BKPT) ) ++#endif ++ ++#ifndef vcos_assert_msg ++#define vcos_assert_msg(cond, ...) \ ++ ( (cond) ? (void)0 : (VCOS_ASSERT_MSG(__VA_ARGS__), VCOS_ASSERT_BKPT) ) ++#endif ++ ++#else /* !defined(NDEBUG) || defined(VCOS_RELEASE_ASSERTS) */ ++ ++#ifndef vcos_assert ++#define vcos_assert(cond) (void)0 ++#endif ++ ++#ifndef vcos_assert_msg ++#define vcos_assert_msg(cond, ...) (void)0 ++#endif ++ ++#endif /* !defined(NDEBUG) || defined(VCOS_RELEASE_ASSERTS) */ ++ ++#if !defined(NDEBUG) ++ ++#ifndef vcos_demand ++#define vcos_demand(cond) \ ++ ( (cond) ? (void)0 : (VCOS_ASSERT_MSG("%s", #cond), VCOS_ASSERT_BKPT, vcos_abort()) ) ++#endif ++ ++#ifndef vcos_demand_msg ++#define vcos_demand_msg(cond, ...) \ ++ ( (cond) ? (void)0 : (VCOS_ASSERT_MSG(__VA_ARGS__), VCOS_ASSERT_BKPT, vcos_abort()) ) ++#endif ++ ++#ifndef vcos_verify ++#define vcos_verify(cond) \ ++ ( (cond) ? 1 : (VCOS_VERIFY_MSG("%s", #cond), VCOS_VERIFY_BKPT, 0) ) ++#endif ++ ++#ifndef vcos_verify_msg ++#define vcos_verify_msg(cond, ...) \ ++ ( (cond) ? 1 : (VCOS_VERIFY_MSG(__VA_ARGS__), VCOS_VERIFY_BKPT, 0) ) ++#endif ++ ++#else /* !defined(NDEBUG) */ ++ ++#ifndef vcos_demand ++#define vcos_demand(cond) \ ++ ( (cond) ? (void)0 : vcos_abort() ) ++#endif ++ ++#ifndef vcos_demand_msg ++#define vcos_demand_msg(cond, ...) \ ++ ( (cond) ? (void)0 : vcos_abort() ) ++#endif ++ ++#ifndef vcos_verify ++#define vcos_verify(cond) (cond) ++#endif ++ ++#ifndef vcos_verify_msg ++#define vcos_verify_msg(cond, ...) (cond) ++#endif ++ ++#endif /* !defined(NDEBUG) */ ++ ++#ifndef vcos_static_assert ++#if defined(__GNUC__) ++#define vcos_static_assert(cond) __attribute__((unused)) extern int vcos_static_assert[(cond)?1:-1] ++#else ++#define vcos_static_assert(cond) extern int vcos_static_assert[(cond)?1:-1] ++#endif ++#endif ++ ++#ifndef vc_assert ++#define vc_assert(cond) vcos_assert(cond) ++#endif ++ ++/** Print out a backtrace, on supported platforms. ++ */ ++extern void vcos_backtrace_self(void); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* VCOS_ASSERT_H */ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_atomic_flags.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_atomic_flags.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_atomic_flags.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_atomic_flags.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,83 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - public header file ++=============================================================================*/ ++ ++#ifndef VCOS_ATOMIC_FLAGS_H ++#define VCOS_ATOMIC_FLAGS_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file vcos_atomic_flags.h ++ * ++ * Defines atomic flags API. ++ * ++ * 32 flags. Atomic "or" and "get and clear" operations ++ */ ++ ++/** ++ * Create an atomic flags instance. ++ * ++ * @param atomic_flags Pointer to atomic flags instance, filled in on return ++ * ++ * @return VCOS_SUCCESS if succeeded. ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_atomic_flags_create(VCOS_ATOMIC_FLAGS_T *atomic_flags); ++ ++/** ++ * Atomically set the specified flags. ++ * ++ * @param atomic_flags Instance to set flags on ++ * @param flags Mask of flags to set ++ */ ++VCOS_INLINE_DECL ++void vcos_atomic_flags_or(VCOS_ATOMIC_FLAGS_T *atomic_flags, uint32_t flags); ++ ++/** ++ * Retrieve the current flags and then clear them. The entire operation is ++ * atomic. ++ * ++ * @param atomic_flags Instance to get/clear flags from/on ++ * ++ * @return Mask of flags which were set (and we cleared) ++ */ ++VCOS_INLINE_DECL ++uint32_t vcos_atomic_flags_get_and_clear(VCOS_ATOMIC_FLAGS_T *atomic_flags); ++ ++/** ++ * Delete an atomic flags instance. ++ * ++ * @param atomic_flags Instance to delete ++ */ ++VCOS_INLINE_DECL ++void vcos_atomic_flags_delete(VCOS_ATOMIC_FLAGS_T *atomic_flags); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_build_info.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_build_info.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_build_info.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_build_info.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,23 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++const char *vcos_get_build_hostname( void ); ++const char *vcos_get_build_version( void ); ++const char *vcos_get_build_time( void ); ++const char *vcos_get_build_date( void ); ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_cfg.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_cfg.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_cfg.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_cfg.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,113 @@ ++/***************************************************************************** ++* Copyright 2009 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#if !defined( VCOS_CFG_H ) ++#define VCOS_CFG_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++typedef struct opaque_vcos_cfg_buf_t *VCOS_CFG_BUF_T; ++typedef struct opaque_vcos_cfg_entry_t *VCOS_CFG_ENTRY_T; ++ ++/** \file vcos_file.h ++ * ++ * API for accessing configuration/statistics information. This ++ * is loosely modelled on the linux proc entries. ++ */ ++ ++typedef void (*VCOS_CFG_SHOW_FPTR)( VCOS_CFG_BUF_T buf, void *data ); ++typedef void (*VCOS_CFG_PARSE_FPTR)( VCOS_CFG_BUF_T buf, void *data ); ++ ++/** Create a configuration directory. ++ * ++ * @param entry Place to store the created config entry. ++ * @param parent Parent entry (for directory like config ++ * options). ++ * @param entryName Name of the directory. ++ */ ++ ++VCOS_STATUS_T vcos_cfg_mkdir( VCOS_CFG_ENTRY_T *entry, ++ VCOS_CFG_ENTRY_T *parent, ++ const char *dirName ); ++ ++/** Create a configuration entry. ++ * ++ * @param entry Place to store the created config entry. ++ * @param parent Parent entry (for directory like config ++ * options). ++ * @param entryName Name of the configuration entry. ++ * @param showFunc Function pointer to show configuration ++ * data. ++ * @param parseFunc Function pointer to parse new data. ++ */ ++ ++VCOS_STATUS_T vcos_cfg_create_entry( VCOS_CFG_ENTRY_T *entry, ++ VCOS_CFG_ENTRY_T *parent, ++ const char *entryName, ++ VCOS_CFG_SHOW_FPTR showFunc, ++ VCOS_CFG_PARSE_FPTR parseFunc, ++ void *data ); ++ ++/** Determines if a configuration entry has been created or not. ++ * ++ * @param entry Configuration entry to query. ++ */ ++ ++int vcos_cfg_is_entry_created( VCOS_CFG_ENTRY_T entry ); ++ ++/** Returns the name of a configuration entry. ++ * ++ * @param entry Configuration entry to query. ++ */ ++ ++const char *vcos_cfg_get_entry_name( VCOS_CFG_ENTRY_T entry ); ++ ++/** Removes a configuration entry. ++ * ++ * @param entry Configuration entry to remove. ++ */ ++ ++VCOS_STATUS_T vcos_cfg_remove_entry( VCOS_CFG_ENTRY_T *entry ); ++ ++ ++/** Writes data into a configuration buffer. Only valid inside ++ * the show function. ++ * ++ * @param buf Buffer to write data into. ++ * @param fmt printf style format string. ++ */ ++ ++void vcos_cfg_buf_printf( VCOS_CFG_BUF_T buf, const char *fmt, ... ); ++ ++/** Retrieves a null terminated string of the data associated ++ * with the buffer. Only valid inside the parse function. ++ * ++ * @param buf Buffer to get data from. ++ * @param fmt printf style format string. ++ */ ++ ++char *vcos_cfg_buf_get_str( VCOS_CFG_BUF_T buf ); ++ ++void *vcos_cfg_get_proc_entry( VCOS_CFG_ENTRY_T entry ); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_cmd.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_cmd.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_cmd.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_cmd.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,98 @@ ++/***************************************************************************** ++* Copyright 2009 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#if !defined( VCOS_CMD_H ) ++#define VCOS_CMD_H ++ ++/* ---- Include Files ----------------------------------------------------- */ ++ ++#include "interface/vcos/vcos.h" ++#include "interface/vcos/vcos_stdint.h" ++ ++ ++/* ---- Constants and Types ---------------------------------------------- */ ++ ++struct VCOS_CMD_S; ++typedef struct VCOS_CMD_S VCOS_CMD_T; ++ ++typedef struct ++{ ++ int argc; /* Number of arguments (includes the command/sub-command) */ ++ char **argv; /* Array of arguments */ ++ char **argv_orig; /* Original array of arguments */ ++ ++ VCOS_CMD_T *cmd_entry; ++ VCOS_CMD_T *cmd_parent_entry; ++ ++ int use_log; /* Output being logged? */ ++ size_t result_size; /* Size of result buffer. */ ++ char *result_ptr; /* Next place to put output. */ ++ char *result_buf; /* Start of the buffer. */ ++ ++} VCOS_CMD_PARAM_T; ++ ++typedef VCOS_STATUS_T (*VCOS_CMD_FUNC_T)( VCOS_CMD_PARAM_T *param ); ++ ++struct VCOS_CMD_S ++{ ++ const char *name; ++ const char *args; ++ VCOS_CMD_FUNC_T cmd_fn; ++ VCOS_CMD_T *sub_cmd_entry; ++ const char *descr; ++ ++}; ++ ++/* ---- Variable Externs ------------------------------------------------- */ ++ ++/* ---- Function Prototypes ---------------------------------------------- */ ++ ++/* ++ * Common printing routine for generating command output. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_cmd_error( VCOS_CMD_PARAM_T *param, const char *fmt, ... ) VCOS_FORMAT_ATTR_(printf, 2, 3); ++VCOSPRE_ void VCOSPOST_ vcos_cmd_printf( VCOS_CMD_PARAM_T *param, const char *fmt, ... ) VCOS_FORMAT_ATTR_(printf, 2, 3); ++VCOSPRE_ void VCOSPOST_ vcos_cmd_vprintf( VCOS_CMD_PARAM_T *param, const char *fmt, va_list args ) VCOS_FORMAT_ATTR_(printf, 2, 0); ++ ++/* ++ * Cause vcos_cmd_error, printf and vprintf to always log to the provided ++ * category. When this call is made, the results buffer passed into ++ * vcos_cmd_execute is used as a line buffer and does not need to be ++ * output by the caller. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_cmd_always_log_output( VCOS_LOG_CAT_T *log_category ); ++ ++/* ++ * Prints command usage for the current command. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_cmd_usage( VCOS_CMD_PARAM_T *param ); ++ ++/* ++ * Register commands to be processed ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_cmd_register( VCOS_CMD_T *cmd_entry ); ++ ++/* ++ * Registers multiple commands to be processed. The array should ++ * be terminated by an entry with all zeros. ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_cmd_register_multiple( VCOS_CMD_T *cmd_entry ); ++ ++/* ++ * Executes a command based on a command line. ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_cmd_execute( int argc, char **argv, size_t result_size, char *result_buf ); ++ ++#endif /* VCOS_CMD_H */ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_ctype.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_ctype.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_ctype.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_ctype.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,40 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - public header file ++=============================================================================*/ ++ ++#ifndef VCOS_CTYPE_H ++#define VCOS_CTYPE_H ++ ++/** ++ * \file ++ * ++ * ctype functions. ++ * ++ */ ++ ++#ifdef __KERNEL__ ++#include ++#else ++#include ++#endif ++ ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_dlfcn.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_dlfcn.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_dlfcn.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_dlfcn.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,80 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VCOS - abstraction over dynamic library opening ++=============================================================================*/ ++ ++#ifndef VCOS_DLFCN_H ++#define VCOS_DLFCN_H ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#define VCOS_DL_LAZY 1 ++#define VCOS_DL_NOW 2 ++ ++/** ++ * \file ++ * ++ * Loading dynamic libraries. See also dlfcn.h. ++ */ ++ ++/** Open a dynamic library. ++ * ++ * @param name name of the library ++ * @param mode Load lazily or immediately (VCOS_DL_LAZY, VCOS_DL_NOW). ++ * ++ * @return A handle for use in subsequent calls. ++ */ ++VCOSPRE_ void * VCOSPOST_ vcos_dlopen(const char *name, int mode); ++ ++/** Look up a symbol. ++ * ++ * @param handle Handle to open ++ * @param name Name of function ++ * ++ * @return Function pointer, or NULL. ++ */ ++VCOSPRE_ void VCOSPOST_ (*vcos_dlsym(void *handle, const char *name))(void); ++ ++/** Close a library ++ * ++ * @param handle Handle to close ++ */ ++VCOSPRE_ int VCOSPOST_ vcos_dlclose (void *handle); ++ ++/** Return error message from library. ++ * ++ * @param err On return, set to non-zero if an error has occurred ++ * @param buf Buffer to write error to ++ * @param len Size of buffer (including terminating NUL). ++ */ ++VCOSPRE_ int VCOSPOST_ vcos_dlerror(int *err, char *buf, size_t buflen); ++ ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_event_flags.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_event_flags.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_event_flags.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_event_flags.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,109 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - public header file ++=============================================================================*/ ++ ++#ifndef VCOS_EVENT_FLAGS_H ++#define VCOS_EVENT_FLAGS_H ++ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++#define VCOS_EVENT_FLAGS_SUSPEND VCOS_SUSPEND ++#define VCOS_EVENT_FLAGS_NO_SUSPEND VCOS_NO_SUSPEND ++typedef VCOS_OPTION VCOS_EVENTGROUP_OPERATION_T; ++ ++/** ++ * \file vcos_event_flags.h ++ * ++ * Defines event flags API. ++ * ++ * Similar to Nucleus event groups. ++ * ++ * These have the same semantics as Nucleus event groups and ThreadX event ++ * flags. As such, they are quite complex internally; if speed is important ++ * they might not be your best choice. ++ * ++ */ ++ ++/** ++ * Create an event flags instance. ++ * ++ * @param flags Pointer to event flags instance, filled in on return. ++ * @param name Name for the event flags, used for debug. ++ * ++ * @return VCOS_SUCCESS if succeeded. ++ */ ++ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_event_flags_create(VCOS_EVENT_FLAGS_T *flags, const char *name); ++ ++/** ++ * Set some events. ++ * ++ * @param flags Instance to set flags on ++ * @param events Bitmask of the flags to actually set ++ * @param op How the flags should be set. VCOS_OR will OR in the flags; VCOS_AND ++ * will AND them in, possibly clearing existing flags. ++ */ ++VCOS_INLINE_DECL ++void vcos_event_flags_set(VCOS_EVENT_FLAGS_T *flags, ++ VCOS_UNSIGNED events, ++ VCOS_OPTION op); ++ ++/** ++ * Retrieve some events. ++ * ++ * Waits until the specified events have been set. ++ * ++ * @param flags Instance to wait on ++ * @param requested_events The bitmask to wait for ++ * @param op VCOS_OR - get any; VCOS_AND - get all. ++ * @param ms_suspend How long to wait, in milliseconds ++ * @param retrieved_events the events actually retrieved. ++ * ++ * @return VCOS_SUCCESS if events were retrieved. VCOS_EAGAIN if the ++ * timeout expired. ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_event_flags_get(VCOS_EVENT_FLAGS_T *flags, ++ VCOS_UNSIGNED requested_events, ++ VCOS_OPTION op, ++ VCOS_UNSIGNED ms_suspend, ++ VCOS_UNSIGNED *retrieved_events); ++ ++ ++/** ++ * Delete an event flags instance. ++ */ ++VCOS_INLINE_DECL ++void vcos_event_flags_delete(VCOS_EVENT_FLAGS_T *); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_event.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_event.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_event.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_event.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,108 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - public header file for events ++=============================================================================*/ ++ ++#ifndef VCOS_EVENT_H ++#define VCOS_EVENT_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file ++ * ++ * An event is akin to the Win32 auto-reset event. ++ * ++ * ++ * Signalling an event will wake up one waiting thread only. Once one ++ * thread has been woken the event atomically returns to the unsignalled ++ * state. ++ * ++ * If no threads are waiting on the event when it is signalled it remains ++ * signalled. ++ * ++ * This is almost, but not quite, completely unlike the "event flags" ++ * object based on Nucleus event groups and ThreadX event flags. ++ * ++ * In particular, it should be similar in speed to a semaphore, unlike ++ * the event flags. ++ */ ++ ++/** ++ * Create an event instance. ++ * ++ * @param event Filled in with constructed event. ++ * @param name Name of the event (for debugging) ++ * ++ * @return VCOS_SUCCESS on success, or error code. ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_event_create(VCOS_EVENT_T *event, const char *name); ++ ++#ifndef vcos_event_signal ++ ++/** ++ * Signal the event. The event will return to being unsignalled ++ * after exactly one waiting thread has been woken up. If no ++ * threads are waiting it remains signalled. ++ * ++ * @param event The event to signal ++ */ ++VCOS_INLINE_DECL ++void vcos_event_signal(VCOS_EVENT_T *event); ++ ++/** ++ * Wait for the event. ++ * ++ * @param event The event to wait for ++ * @return VCOS_SUCCESS on success, VCOS_EAGAIN if the wait was interrupted. ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_event_wait(VCOS_EVENT_T *event); ++ ++/** ++ * Try event, but don't block. ++ * ++ * @param event The event to try ++ * @return VCOS_SUCCESS on success, VCOS_EAGAIN if the event is not currently signalled ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_event_try(VCOS_EVENT_T *event); ++ ++#endif ++ ++/* ++ * Destroy an event. ++ */ ++VCOS_INLINE_DECL ++void vcos_event_delete(VCOS_EVENT_T *event); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,212 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - public header file ++=============================================================================*/ ++ ++/** ++ * \mainpage OS Abstraction Layer ++ * ++ * \section intro Introduction ++ * ++ * This abstraction layer is here to allow the underlying OS to be easily changed (e.g. from ++ * Nucleus to ThreadX) and to aid in porting host applications to new targets. ++ * ++ * \subsection error Error handling ++ * ++ * Wherever possible, VCOS functions assert internally and return void. The only exceptions ++ * are creation functions (which might fail due to lack of resources) and functions that ++ * might timeout or fail due to lack of space. Errors that might be reported by the underlying ++ * OS API (e.g. invalid mutex) are treated as a programming error, and are merely asserted on. ++ * ++ * \section thread_synch Threads and synchronisation ++ * ++ * \subsection thread Threads ++ * ++ * The thread API is somewhat different to that found in Nucleus. In particular, threads ++ * cannot just be destroyed at arbitrary times and nor can they merely exit. This is so ++ * that the same API can be implemented across all interesting platforms without too much ++ * difficulty. See vcos_thread.h for details. Thread attributes are configured via ++ * the VCOS_THREAD_ATTR_T structure, found in vcos_thread_attr.h. ++ * ++ * \subsection sema Semaphores ++ * ++ * Counted semaphores (c.f. Nucleus NU_SEMAPHORE) are created with VCOS_SEMAPHORE_T. ++ * Under ThreadX on VideoCore, semaphores are implemented using VideoCore spinlocks, and ++ * so are quite a lot faster than ordinary ThreadX semaphores. See vcos_semaphore.h. ++ * ++ * \subsection mtx Mutexes ++ * ++ * Mutexes are used for locking. Attempts to take a mutex twice, or to unlock it ++ * in a different thread to the one in which it was locked should be expected to fail. ++ * Mutexes are not re-entrant (see vcos_reentrant_mutex.h for a slightly slower ++ * re-entrant mutex). ++ * ++ * \subsection evflags Event flags ++ * ++ * Event flags (the ThreadX name - also known as event groups under Nucleus) provide ++ * 32 flags which can be waited on by multiple clients, and signalled by multiple clients. ++ * A timeout can be specified. See vcos_event_flags.h. An alternative to this is the ++ * VCOS_EVENT_T (see vcos_event.h) which is akin to the Win32 auto-reset event, or a ++ * saturating counted semaphore. ++ * ++ * \subsection event Events ++ * ++ * A VCOS_EVENT_T is a bit like a saturating semaphore. No matter how many times it ++ * is signalled, the waiter will only wake up once. See vcos_event.h. You might think this ++ * is useful if you suspect that the cost of reading the semaphore count (perhaps via a ++ * system call) is expensive on your platform. ++ * ++ * \subsection tls Thread local storage ++ * ++ * Thread local storage is supported using vcos_tls.h. This is emulated on Nucleus ++ * and ThreadX. ++ * ++ * \section int Interrupts ++ * ++ * The legacy LISR/HISR scheme found in Nucleus is supported via the legacy ISR API, ++ * which is also supported on ThreadX. New code should avoid this, and old code should ++ * be migrated away from it, since it is slow. See vcos_legacy_isr.h. ++ * ++ * Registering an interrupt handler, and disabling/restoring interrupts, is handled ++ * using the functions in vcos_isr.h. ++ * ++ */ ++ ++/** ++ * \file vcos.h ++ * ++ * This is the top level header file. Clients include this. It pulls in the platform-specific ++ * header file (vcos_platform.h) together with header files defining the expected APIs, such ++ * as vcos_mutex.h, vcos_semaphore.h, etc. It is also possible to include these header files ++ * directly. ++ * ++ */ ++ ++#ifndef VCOS_H ++#define VCOS_H ++ ++#include "interface/vcos/vcos_assert.h" ++#include "vcos_types.h" ++#include "vcos_platform.h" ++ ++#ifndef VCOS_INIT_H ++#include "interface/vcos/vcos_init.h" ++#endif ++ ++#ifndef VCOS_SEMAPHORE_H ++#include "interface/vcos/vcos_semaphore.h" ++#endif ++ ++#ifndef VCOS_THREAD_H ++#include "interface/vcos/vcos_thread.h" ++#endif ++ ++#ifndef VCOS_MUTEX_H ++#include "interface/vcos/vcos_mutex.h" ++#endif ++ ++#ifndef VCOS_MEM_H ++#include "interface/vcos/vcos_mem.h" ++#endif ++ ++#ifndef VCOS_LOGGING_H ++#include "interface/vcos/vcos_logging.h" ++#endif ++ ++#ifndef VCOS_STRING_H ++#include "interface/vcos/vcos_string.h" ++#endif ++ ++#ifndef VCOS_EVENT_H ++#include "interface/vcos/vcos_event.h" ++#endif ++ ++#ifndef VCOS_THREAD_ATTR_H ++#include "interface/vcos/vcos_thread_attr.h" ++#endif ++ ++#ifndef VCOS_TLS_H ++#include "interface/vcos/vcos_tls.h" ++#endif ++ ++#ifndef VCOS_REENTRANT_MUTEX_H ++#include "interface/vcos/vcos_reentrant_mutex.h" ++#endif ++ ++#ifndef VCOS_NAMED_SEMAPHORE_H ++#include "interface/vcos/vcos_named_semaphore.h" ++#endif ++ ++#ifndef VCOS_QUICKSLOW_MUTEX_H ++#include "interface/vcos/vcos_quickslow_mutex.h" ++#endif ++ ++/* Headers with predicates */ ++ ++#if VCOS_HAVE_EVENT_FLAGS ++#include "interface/vcos/vcos_event_flags.h" ++#endif ++ ++#if VCOS_HAVE_QUEUE ++#include "interface/vcos/vcos_queue.h" ++#endif ++ ++#if VCOS_HAVE_LEGACY_ISR ++#include "interface/vcos/vcos_legacy_isr.h" ++#endif ++ ++#if VCOS_HAVE_TIMER ++#include "interface/vcos/vcos_timer.h" ++#endif ++ ++#if VCOS_HAVE_MEMPOOL ++#include "interface/vcos/vcos_mempool.h" ++#endif ++ ++#if VCOS_HAVE_ISR ++#include "interface/vcos/vcos_isr.h" ++#endif ++ ++#if VCOS_HAVE_ATOMIC_FLAGS ++#include "interface/vcos/vcos_atomic_flags.h" ++#endif ++ ++#if VCOS_HAVE_ONCE ++#include "interface/vcos/vcos_once.h" ++#endif ++ ++#if VCOS_HAVE_BLOCK_POOL ++#include "interface/vcos/vcos_blockpool.h" ++#endif ++ ++#if VCOS_HAVE_FILE ++#include "interface/vcos/vcos_file.h" ++#endif ++ ++#if VCOS_HAVE_CFG ++#include "interface/vcos/vcos_cfg.h" ++#endif ++ ++#if VCOS_HAVE_CMD ++#include "interface/vcos/vcos_cmd.h" ++#endif ++ ++#endif /* VCOS_H */ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_init.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_init.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_init.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_init.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,54 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - initialization routines ++=============================================================================*/ ++ ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** \file ++ * ++ * Some OS support libraries need some initialization. To support this, call this ++ * function at the start of day. ++ */ ++ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_init(void); ++VCOSPRE_ void VCOSPOST_ vcos_deinit(void); ++VCOSPRE_ void VCOSPOST_ vcos_global_lock(void); ++VCOSPRE_ void VCOSPOST_ vcos_global_unlock(void); ++ ++/** Pass in the argv/argc arguments passed to main() */ ++VCOSPRE_ void VCOSPOST_ vcos_set_args(int argc, const char **argv); ++ ++/** Return argc. */ ++VCOSPRE_ int VCOSPOST_ vcos_get_argc(void); ++ ++/** Return argv. */ ++VCOSPRE_ const char ** VCOSPOST_ vcos_get_argv(void); ++ ++#ifdef __cplusplus ++} ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_logging.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_logging.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_logging.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_logging.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,290 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - logging support ++=============================================================================*/ ++ ++#ifndef VCOS_LOGGING_H ++#define VCOS_LOGGING_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file ++ * ++ * Logging support ++ * ++ * This provides categorised logging. Clients register ++ * a category, and then get a number of logging levels for ++ * that category. ++ * ++ * The logging level flag is tested using a flag *before* the ++ * function call, which makes logging very fast when disabled - there ++ * is no function call overhead just to find out that this log ++ * message is disabled. ++ * ++ * \section VCOS_LOG_CATEGORY ++ * ++ * As a convenience, clients define VCOS_LOG_CATEGORY to point to ++ * their category; the various vcos_log_xxx() macros then expand to ++ * use this. ++ * ++ * e.g. ++ * ++ * #define VCOS_LOG_CATEGORY (&my_category) ++ * ++ * #include ++ * ++ * VCOS_LOG_CAT_T my_category; ++ * ++ * .... ++ * ++ * vcos_log_trace("Stuff happened: %d", n_stuff); ++ * ++ */ ++ ++/** Logging levels */ ++typedef enum VCOS_LOG_LEVEL_T ++{ ++ VCOS_LOG_UNINITIALIZED = 0, ++ VCOS_LOG_NEVER, ++ VCOS_LOG_ERROR, ++ VCOS_LOG_WARN, ++ VCOS_LOG_INFO, ++ VCOS_LOG_TRACE, ++} VCOS_LOG_LEVEL_T; ++ ++ ++/** Initialize a logging category without going through vcos_log_register(). ++ * ++ * This is useful for the case where there is no obvious point to do the ++ * registration (no initialization function for the module). However, it ++ * means that your logging category is not registered, so cannot be easily ++ * changed at run-time. ++ */ ++#define VCOS_LOG_INIT(n,l) { l, n, 0, {0}, 0, 0 } ++ ++/** A registered logging category. ++ */ ++typedef struct VCOS_LOG_CAT_T ++{ ++ VCOS_LOG_LEVEL_T level; /** Which levels are enabled for this category */ ++ const char *name; /** Name for this category. */ ++ struct VCOS_LOG_CAT_T *next; ++ struct { ++ unsigned int want_prefix:1; ++ } flags; ++ unsigned int refcount; ++ void *platform_data; /** platform specific data */ ++} VCOS_LOG_CAT_T; ++ ++typedef void (*VCOS_VLOG_IMPL_FUNC_T)(const VCOS_LOG_CAT_T *cat, VCOS_LOG_LEVEL_T _level, const char *fmt, va_list args); ++ ++/** Convert a VCOS_LOG_LEVEL_T into a printable string. ++ * The platform needs to implement this function. ++ */ ++VCOSPRE_ const char * VCOSPOST_ vcos_log_level_to_string( VCOS_LOG_LEVEL_T level ); ++ ++/** Convert a string into a VCOS_LOG_LEVEL_T ++ * The platform needs to implement this function. ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_string_to_log_level( const char *str, VCOS_LOG_LEVEL_T *level ); ++ ++/** Log a message. Basic API. Normal code should not use this. ++ * The platform needs to implement this function. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_log_impl(const VCOS_LOG_CAT_T *cat, VCOS_LOG_LEVEL_T _level, const char *fmt, ...) VCOS_FORMAT_ATTR_(printf, 3, 4); ++ ++/** Log a message using a varargs parameter list. Normal code should ++ * not use this. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_vlog_impl(const VCOS_LOG_CAT_T *cat, VCOS_LOG_LEVEL_T _level, const char *fmt, va_list args) VCOS_FORMAT_ATTR_(printf, 3, 0); ++ ++/** Set the function which does the actual logging output. ++ * Passing in NULL causes the default logging function to be ++ * used. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_set_vlog_impl( VCOS_VLOG_IMPL_FUNC_T vlog_impl_func ); ++ ++/** The default logging function, which is provided by each ++ * platform. ++ */ ++ ++VCOSPRE_ void VCOSPOST_ vcos_vlog_default_impl(const VCOS_LOG_CAT_T *cat, VCOS_LOG_LEVEL_T _level, const char *fmt, va_list args) VCOS_FORMAT_ATTR_(printf, 3, 0); ++ ++/* ++ * Initialise the logging subsystem. This is called from ++ * vcos_init() so you don't normally need to call it. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_logging_init(void); ++ ++/** Register a logging category. ++ * ++ * @param name the name of this category. ++ * @param category the category to register. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_log_register(const char *name, VCOS_LOG_CAT_T *category); ++ ++/** Unregister a logging category. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_log_unregister(VCOS_LOG_CAT_T *category); ++ ++/** Return a default logging category, for people too lazy to create their own. ++ * ++ * Using the default category will be slow (there's an extra function ++ * call overhead). Don't do this in normal code. ++ */ ++VCOSPRE_ const VCOS_LOG_CAT_T * VCOSPOST_ vcos_log_get_default_category(void); ++ ++VCOSPRE_ void VCOSPOST_ vcos_set_log_options(const char *opt); ++ ++/** Set the logging level for a category at run time. Without this, the level ++ * will be that set by vcos_log_register from a platform-specific source. ++ * ++ * @param category the category to modify. ++ * @param level the new logging level for this category. ++ */ ++VCOS_STATIC_INLINE void vcos_log_set_level(VCOS_LOG_CAT_T *category, VCOS_LOG_LEVEL_T level) ++{ ++ category->level = level; ++} ++ ++#define vcos_log_dump_mem(cat,label,addr,voidMem,numBytes) do { if (vcos_is_log_enabled(cat,VCOS_LOG_TRACE)) vcos_log_dump_mem_impl(cat,label,addr,voidMem,numBytes); } while (0) ++ ++void vcos_log_dump_mem_impl( const VCOS_LOG_CAT_T *cat, ++ const char *label, ++ uint32_t addr, ++ const void *voidMem, ++ size_t numBytes ); ++ ++/* ++ * Platform specific hooks (optional). ++ */ ++#ifndef vcos_log_platform_init ++#define vcos_log_platform_init() (void)0 ++#endif ++ ++#ifndef vcos_log_platform_register ++#define vcos_log_platform_register(category) (void)0 ++#endif ++ ++#ifndef vcos_log_platform_unregister ++#define vcos_log_platform_unregister(category) (void)0 ++#endif ++ ++/* VCOS_TRACE() - deprecated macro which just outputs in a debug build and ++ * is a no-op in a release build. ++ * ++ * _VCOS_LOG_X() - internal macro which outputs if the current level for the ++ * particular category is higher than the supplied message level. ++ */ ++ ++#define VCOS_LOG_DFLT_CATEGORY vcos_log_get_default_category() ++ ++#define _VCOS_LEVEL(x) (x) ++ ++#define vcos_is_log_enabled(cat,_level) (_VCOS_LEVEL((cat)->level) >= _VCOS_LEVEL(_level)) ++ ++#if defined(_VCOS_METAWARE) || defined(__GNUC__) ++ ++# if !defined(NDEBUG) || defined(VCOS_ALWAYS_WANT_LOGGING) ++# define VCOS_LOGGING_ENABLED ++# define _VCOS_LOG_X(cat, _level, fmt...) do { if (vcos_is_log_enabled(cat,_level)) vcos_log_impl(cat,_level,fmt); } while (0) ++# define _VCOS_VLOG_X(cat, _level, fmt, ap) do { if (vcos_is_log_enabled(cat,_level)) vcos_vlog_impl(cat,_level,fmt,ap); } while (0) ++# else ++# define _VCOS_LOG_X(cat, _level, fmt...) (void)0 ++# define _VCOS_VLOG_X(cat, _level, fmt, ap) (void)0 ++# endif ++ ++ ++ ++# define vcos_log_error(...) _VCOS_LOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_ERROR, __VA_ARGS__) ++# define vcos_log_warn(...) _VCOS_LOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_WARN, __VA_ARGS__) ++# define vcos_log_info(...) _VCOS_LOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_INFO, __VA_ARGS__) ++# define vcos_log_trace(...) _VCOS_LOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_TRACE, __VA_ARGS__) ++ ++# define vcos_vlog_error(fmt,ap) _VCOS_VLOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_ERROR, fmt, ap) ++# define vcos_vlog_warn(fmt,ap) _VCOS_VLOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_WARN, fmt, ap) ++# define vcos_vlog_info(fmt,ap) _VCOS_VLOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_INFO, fmt, ap) ++# define vcos_vlog_trace(fmt,ap) _VCOS_VLOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_TRACE, fmt, ap) ++ ++# define vcos_log(...) _VCOS_LOG_X(VCOS_LOG_DFLT_CATEGORY, VCOS_LOG_INFO, __VA_ARGS__) ++# define vcos_vlog(fmt,ap) _VCOS_VLOG_X(VCOS_LOG_DFLT_CATEGORY, VCOS_LOG_INFO, fmt, ap) ++# define VCOS_ALERT(...) _VCOS_LOG_X(VCOS_LOG_DFLT_CATEGORY, VCOS_LOG_ERROR, __VA_ARGS__) ++# define VCOS_TRACE(...) _VCOS_LOG_X(VCOS_LOG_DFLT_CATEGORY, VCOS_LOG_INFO, __VA_ARGS__) ++ ++/* ++ * MS Visual Studio - pre 2005 does not grok variadic macros ++ */ ++#elif defined(_MSC_VER) ++ ++# if _MSC_VER >= 1400 ++ ++# if !defined(NDEBUG) || defined(VCOS_ALWAYS_WANT_LOGGING) ++# define VCOS_LOGGING_ENABLED ++# define _VCOS_LOG_X(cat, _level, fmt,...) do { if (vcos_is_log_enabled(cat,_level)) vcos_log_impl(cat, _level, fmt, __VA_ARGS__); } while (0) ++# else ++# define _VCOS_LOG_X(cat, _level, fmt,...) (void)0 ++# endif ++ ++# define vcos_log_error(fmt,...) _VCOS_LOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_ERROR, fmt, __VA_ARGS__) ++# define vcos_log_warn(fmt,...) _VCOS_LOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_WARN, fmt, __VA_ARGS__) ++# define vcos_log_info(fmt,...) _VCOS_LOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_INFO, fmt, __VA_ARGS__) ++# define vcos_log_trace(fmt,...) _VCOS_LOG_X(VCOS_LOG_CATEGORY, VCOS_LOG_TRACE, fmt, __VA_ARGS__) ++ ++# define vcos_log(fmt,...) _VCOS_LOG_X(VCOS_LOG_DFLT_CATEGORY, VCOS_LOG_INFO, fmt) ++# define VCOS_ALERT(fmt,...) _VCOS_LOG_X(VCOS_LOG_DFLT_CATEGORY, VCOS_LOG_ERROR, fmt) ++# define VCOS_TRACE(fmt,...) _VCOS_LOG_X(VCOS_LOG_DFLT_CATEGORY, VCOS_LOG_INFO, fmt) ++ ++# else /* _MSC_VER >= 1400 */ ++ ++/* do not define these */ ++ ++# endif /* _MSC_VER >= 1400 */ ++ ++#endif ++ ++#if VCOS_HAVE_CMD ++ ++#include "interface/vcos/vcos_cmd.h" ++ ++/* ++ * These are the log sub-commands. They're exported here for user-mode apps which ++ * may want to call these, since the "log" command isn't registered for user-mode ++ * apps (vcdbg for example, has its own log command). ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_log_assert_cmd( VCOS_CMD_PARAM_T *param ); ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_log_set_cmd( VCOS_CMD_PARAM_T *param ); ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_log_status_cmd( VCOS_CMD_PARAM_T *param ); ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_log_test_cmd( VCOS_CMD_PARAM_T *param ); ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++#endif /* VCOS_LOGGING_H */ ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_lowlevel_thread.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_lowlevel_thread.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_lowlevel_thread.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_lowlevel_thread.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,118 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - low level thread support ++=============================================================================*/ ++ ++#ifndef VCOS_LOWLEVEL_THREAD_H ++#define VCOS_LOWLEVEL_THREAD_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file ++ * ++ * This defines a low level thread API that is supported by *some* operating systems ++ * and can be used to construct the regular "joinable thread" API on those operating ++ * systems. ++ * ++ * Most clients will not need to use this code. ++ * ++ * \sa vcos_joinable_thread.h ++ */ ++ ++/** ++ * \brief Create a thread. ++ * ++ * This creates a thread which can be stopped either by returning from the ++ * entry point function or by calling vcos_llthread_exit from within the entry ++ * point function. The thread must be cleaned up by calling ++ * vcos_llthread_delete. vcos_llthread_delete may or may not terminate the ++ * thread. ++ * ++ * The preemptible parameter familiar from Nucleus is removed, as it is unused in ++ * VideoCore code. Affinity is added, since we do use this. ++ * ++ * @param thread Filled in with thread instance ++ * @param name An optional name for the thread. "" may be used (but ++ * a name will aid in debugging). ++ * @param entry Entry point ++ * @param arg A single argument passed to the entry point function ++ * @param stack Pointer to stack address ++ * @param stacksz Size of stack in bytes ++ * @param priority Priority of task, between VCOS_PRI_LOW and VCOS_PRI_HIGH ++ * @param affinity CPU affinity ++ * ++ * @sa vcos_llthread_terminate vcos_llthread_delete ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_llthread_create(VCOS_LLTHREAD_T *thread, ++ const char *name, ++ VCOS_LLTHREAD_ENTRY_FN_T entry, ++ void *arg, ++ void *stack, ++ VCOS_UNSIGNED stacksz, ++ VCOS_UNSIGNED priority, ++ VCOS_UNSIGNED affinity, ++ VCOS_UNSIGNED timeslice, ++ VCOS_UNSIGNED autostart); ++ ++/** ++ * \brief Exits the current thread. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_llthread_exit(void); ++ ++/** ++ * \brief Delete a thread. This must be called to cleanup after ++ * vcos_llthread_create. This may or may not terminate the thread. ++ * It does not clean up any resources that may have been ++ * allocated by the thread. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_llthread_delete(VCOS_LLTHREAD_T *thread); ++ ++/** ++ * \brief Return current lowlevel thread pointer. ++ */ ++VCOS_INLINE_DECL ++VCOS_LLTHREAD_T *vcos_llthread_current(void); ++ ++/** ++ * Resume a thread. ++ */ ++VCOS_INLINE_DECL ++void vcos_llthread_resume(VCOS_LLTHREAD_T *thread); ++ ++VCOSPRE_ int VCOSPOST_ vcos_llthread_running(VCOS_LLTHREAD_T *thread); ++ ++/** ++ * \brief Create a VCOS_LLTHREAD_T for the current thread. This is so we can ++ * have VCOS_LLTHREAD_Ts even for threads not originally created by VCOS (eg ++ * the thread that calls vcos_init). ++ */ ++extern VCOS_STATUS_T _vcos_llthread_create_attach(VCOS_LLTHREAD_T *thread); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_mem.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_mem.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_mem.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_mem.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,92 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - memory support ++=============================================================================*/ ++ ++#ifndef VCOS_MEM_H ++#define VCOS_MEM_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** \file ++ * ++ * Memory allocation api (malloc/free equivalents) is for benefit of host ++ * applications. VideoCore code should use rtos_XXX functions. ++ * ++ */ ++ ++ ++/** Allocate memory ++ * ++ * @param size Size of memory to allocate ++ * @param description Description, to aid in debugging. May be ignored internally on some platforms. ++ */ ++VCOS_INLINE_DECL ++void *vcos_malloc(VCOS_UNSIGNED size, const char *description); ++ ++void *vcos_kmalloc(VCOS_UNSIGNED size, const char *description); ++void *vcos_kcalloc(VCOS_UNSIGNED num, VCOS_UNSIGNED size, const char *description); ++ ++/** Allocate cleared memory ++ * ++ * @param num Number of items to allocate. ++ * @param size Size of each item in bytes. ++ * @param description Description, to aid in debugging. May be ignored internally on some platforms. ++ */ ++VCOS_INLINE_DECL ++void *vcos_calloc(VCOS_UNSIGNED num, VCOS_UNSIGNED size, const char *description); ++ ++/** Free memory ++ * ++ * Free memory that has been allocated. ++ */ ++VCOS_INLINE_DECL ++void vcos_free(void *ptr); ++ ++void vcos_kfree(void *ptr); ++ ++/** Allocate aligned memory ++ * ++ * Allocate memory aligned on the specified boundary. ++ * ++ * @param size Size of memory to allocate ++ * @param description Description, to aid in debugging. May be ignored internally on some platforms. ++ */ ++VCOS_INLINE_DECL ++void *vcos_malloc_aligned(VCOS_UNSIGNED size, VCOS_UNSIGNED align, const char *description); ++ ++/** Return the amount of free heap memory ++ * ++ */ ++VCOS_INLINE_DECL ++unsigned long vcos_get_free_mem(void); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_msgqueue.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_msgqueue.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_msgqueue.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_msgqueue.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,168 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VCOS - packet-like messages, based loosely on those found in TRIPOS. ++=============================================================================*/ ++ ++#ifndef VCOS_MSGQUEUE_H ++#define VCOS_MSGQUEUE_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file ++ * ++ * Packet-like messages, based loosely on those found in TRIPOS and ++ * derivatives thereof. ++ * ++ * A task can send a message *pointer* to another task, where it is ++ * queued on a linked list and the task woken up. The receiving task ++ * consumes all of the messages on its input queue, and optionally ++ * sends back replies using the original message memory. ++ * ++ * A caller can wait for the reply to a specific message - any other ++ * messages that arrive in the meantime are queued separately. ++ * ++ * ++ * All messages have a standard common layout, but the payload area can ++ * be used freely to extend this. ++ */ ++ ++/** Map the payload portion of a message to a structure pointer. ++ */ ++#define VCOS_MSG_DATA(_msg) (void*)((_msg)->data) ++ ++/** Standard message ids - FIXME - these need to be done properly! */ ++#define VCOS_MSG_N_QUIT 1 ++#define VCOS_MSG_N_OPEN 2 ++#define VCOS_MSG_N_CLOSE 3 ++#define VCOS_MSG_N_PRIVATE (1<<20) ++ ++#define VCOS_MSG_REPLY_BIT (1<<31) ++ ++/** Make gnuc compiler be happy about pointer punning */ ++#ifdef __GNUC__ ++#define __VCOS_MAY_ALIAS __attribute__((__may_alias__)) ++#else ++#define __VCOS_MAY_ALIAS ++#endif ++ ++/** A single message queue. ++ */ ++typedef struct VCOS_MSGQUEUE_T ++{ ++ struct VCOS_MSG_T *head; /**< head of linked list of messages waiting on this queue */ ++ struct VCOS_MSG_T *tail; /**< tail of message queue */ ++ VCOS_SEMAPHORE_T sem; /**< thread waits on this for new messages */ ++ VCOS_MUTEX_T lock; /**< locks the messages list */ ++} VCOS_MSGQUEUE_T; ++ ++/** A single message ++ */ ++typedef struct VCOS_MSG_T ++{ ++ uint32_t code; /**< message code */ ++ int error; /**< error status signalled back to caller */ ++ VCOS_MSGQUEUE_T *dst; /**< destination queue */ ++ VCOS_MSGQUEUE_T *src; /**< source; replies go back to here */ ++ struct VCOS_MSG_T *next; /**< next in queue */ ++ VCOS_THREAD_T *src_thread; /**< for debug */ ++ uint32_t data[25]; /**< payload area */ ++} VCOS_MSG_T; ++ ++/** An endpoint ++ */ ++typedef struct VCOS_MSG_ENDPOINT_T ++{ ++ VCOS_MSGQUEUE_T primary; /**< incoming messages */ ++ VCOS_MSGQUEUE_T secondary; /**< this is used for waitspecific */ ++ char name[32]; /**< name of this endpoint, for find() */ ++ struct VCOS_MSG_ENDPOINT_T *next; /**< next in global list of endpoints */ ++} VCOS_MSG_ENDPOINT_T; ++#define MSG_REPLY_BIT (1<<31) ++ ++/** Initalise the library. Normally called from vcos_init(). ++ */ ++extern VCOS_STATUS_T vcos_msgq_init(void); ++ ++/** Find a message queue by name and get a handle to it. ++ * ++ * @param name the name of the queue to find ++ * ++ * @return The message queue, or NULL if not found. ++ */ ++VCOSPRE_ VCOS_MSGQUEUE_T VCOSPOST_ *vcos_msgq_find(const char *name); ++ ++/** Wait for a message queue to come into existence. If it already exists, ++ * return immediately, otherwise block. ++ * ++ * On the whole, if you find yourself using this, it is probably a sign ++ * of poor design, since you should create all the server threads first, ++ * and then the client threads. But it is sometimes useful. ++ * ++ * @param name the name of the queue to find ++ * @return The message queue ++ */ ++VCOSPRE_ VCOS_MSGQUEUE_T VCOSPOST_ *vcos_msgq_wait(const char *name); ++ ++/** Send a message. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_msg_send(VCOS_MSGQUEUE_T *dest, uint32_t code, VCOS_MSG_T *msg); ++ ++/** Send a message and wait for a reply. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_msg_sendwait(VCOS_MSGQUEUE_T *queue, uint32_t code, VCOS_MSG_T *msg); ++ ++/** Wait for a message on this thread's endpoint. ++ */ ++VCOSPRE_ VCOS_MSG_T * VCOSPOST_ vcos_msg_wait(void); ++ ++/** Wait for a specific message. ++ */ ++VCOS_MSG_T * vcos_msg_wait_specific(VCOS_MSGQUEUE_T *queue, VCOS_MSG_T *msg); ++ ++/** Peek for a message on this thread's endpoint, if a message is not available, NULL is ++ returned. If a message is available it will be removed from the endpoint and returned. ++ */ ++VCOSPRE_ VCOS_MSG_T * VCOSPOST_ vcos_msg_peek(void); ++ ++/** Send a reply to a message ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_msg_reply(VCOS_MSG_T *msg); ++ ++/** Create an endpoint. Each thread should need no more than one of these - if you ++ * find yourself needing a second one, you've done something wrong. ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_msgq_endpoint_create(VCOS_MSG_ENDPOINT_T *ep, const char *name); ++ ++/** Destroy an endpoint. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_msgq_endpoint_delete(VCOS_MSG_ENDPOINT_T *ep); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_mutex.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_mutex.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_mutex.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_mutex.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,103 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - mutex public header file ++=============================================================================*/ ++ ++#ifndef VCOS_MUTEX_H ++#define VCOS_MUTEX_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file vcos_mutex.h ++ * ++ * Mutex API. Mutexes are not re-entrant, as supporting this adds extra code ++ * that slows down clients which have been written sensibly. ++ * ++ * \sa vcos_reentrant_mutex.h ++ * ++ */ ++ ++/** Create a mutex. ++ * ++ * @param m Filled in with mutex on return ++ * @param name A non-null name for the mutex, used for diagnostics. ++ * ++ * @return VCOS_SUCCESS if mutex was created, or error code. ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_mutex_create(VCOS_MUTEX_T *m, const char *name); ++ ++/** Delete the mutex. ++ */ ++VCOS_INLINE_DECL ++void vcos_mutex_delete(VCOS_MUTEX_T *m); ++ ++/** ++ * \brief Wait to claim the mutex. ++ * ++ * On most platforms this always returns VCOS_SUCCESS, and so would ideally be ++ * a void function, however some platforms allow a wait to be interrupted so ++ * it remains non-void. ++ * ++ * Try to obtain the mutex. ++ * @param m Mutex to wait on ++ * @return VCOS_SUCCESS - mutex was taken. ++ * VCOS_EAGAIN - could not take mutex. ++ */ ++#ifndef vcos_mutex_lock ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_mutex_lock(VCOS_MUTEX_T *m); ++ ++/** Release the mutex. ++ */ ++VCOS_INLINE_DECL ++void vcos_mutex_unlock(VCOS_MUTEX_T *m); ++#endif ++ ++/** Test if the mutex is already locked. ++ * ++ * @return 1 if mutex is locked, 0 if it is unlocked. ++ */ ++VCOS_INLINE_DECL ++int vcos_mutex_is_locked(VCOS_MUTEX_T *m); ++ ++/** Obtain the mutex if possible. ++ * ++ * @param m the mutex to try to obtain ++ * ++ * @return VCOS_SUCCESS if mutex is succesfully obtained, or VCOS_EAGAIN ++ * if it is already in use by another thread. ++ */ ++#ifndef vcos_mutex_trylock ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_mutex_trylock(VCOS_MUTEX_T *m); ++#endif ++ ++ ++#ifdef __cplusplus ++} ++#endif ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_once.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_once.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_once.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_once.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,53 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - 'once' ++=============================================================================*/ ++ ++#ifndef VCOS_ONCE_H ++#define VCOS_ONCE_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file vcos_once.h ++ * ++ * Ensure something is called only once. ++ * ++ * Initialize once_control to VCOS_ONCE_INIT. The first ++ * time this is called, the init_routine will be called. Thereafter ++ * it won't. ++ * ++ * \sa pthread_once() ++ * ++ */ ++ ++VCOS_STATUS_T vcos_once(VCOS_ONCE_T *once_control, ++ void (*init_routine)(void)); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_semaphore.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_semaphore.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_semaphore.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_semaphore.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,126 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - public header file ++=============================================================================*/ ++ ++#ifndef VCOS_SEMAPHORE_H ++#define VCOS_SEMAPHORE_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file vcos_semaphore.h ++ * ++ * \section sem Semaphores ++ * ++ * This provides counting semaphores. Semaphores are not re-entrant. On sensible ++ * operating systems a semaphore can always be posted but can only be taken in ++ * thread (not interrupt) context. Under Nucleus, a LISR cannot post a semaphore, ++ * although it would not be hard to lift this restriction. ++ * ++ * \subsection timeout Timeout ++ * ++ * On both Nucleus and ThreadX a semaphore can be taken with a timeout. This is ++ * not supported by VCOS because it makes the non-timeout code considerably more ++ * complicated (and hence slower). In the unlikely event that you need a timeout ++ * with a semaphore, and you cannot simply redesign your code to avoid it, use ++ * an event flag (vcos_event_flags.h). ++ * ++ * \subsection sem_nucleus Changes from Nucleus: ++ * ++ * Semaphores are always "FIFO" - i.e. sleeping threads are woken in FIFO order. That's ++ * because: ++ * \arg there's no support for NU_PRIORITY in threadx (though it can be emulated, slowly) ++ * \arg we don't appear to actually consciously use it - for example, Dispmanx uses ++ * it, but all threads waiting are the same priority. ++ * ++ */ ++ ++/** ++ * \brief Create a semaphore. ++ * ++ * Create a semaphore. ++ * ++ * @param sem Pointer to memory to be initialized ++ * @param name A name for this semaphore. The name may be truncated internally. ++ * @param count The initial count for the semaphore. ++ * ++ * @return VCOS_SUCCESS if the semaphore was created. ++ * ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_semaphore_create(VCOS_SEMAPHORE_T *sem, const char *name, VCOS_UNSIGNED count); ++ ++/** ++ * \brief Wait on a semaphore. ++ * ++ * There is no timeout option on a semaphore, as adding this will slow down ++ * implementations on some platforms. If you need that kind of behaviour, use ++ * an event group. ++ * ++ * On most platforms this always returns VCOS_SUCCESS, and so would ideally be ++ * a void function, however some platforms allow a wait to be interrupted so ++ * it remains non-void. ++ * ++ * @param sem Semaphore to wait on ++ * @return VCOS_SUCCESS - semaphore was taken. ++ * VCOS_EAGAIN - could not take semaphore ++ * ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_semaphore_wait(VCOS_SEMAPHORE_T *sem); ++ ++/** ++ * \brief Try to wait for a semaphore. ++ * ++ * Try to obtain the semaphore. If it is already taken, return VCOS_TIMEOUT. ++ * @param sem Semaphore to wait on ++ * @return VCOS_SUCCESS - semaphore was taken. ++ * VCOS_EAGAIN - could not take semaphore ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_semaphore_trywait(VCOS_SEMAPHORE_T *sem); ++ ++/** ++ * \brief Post a semaphore. ++ * ++ * @param sem Semaphore to wait on ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_semaphore_post(VCOS_SEMAPHORE_T *sem); ++ ++/** ++ * \brief Delete a semaphore, releasing any resources consumed by it. ++ * ++ * @param sem Semaphore to wait on ++ */ ++VCOS_INLINE_DECL ++void vcos_semaphore_delete(VCOS_SEMAPHORE_T *sem); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_stdbool.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_stdbool.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_stdbool.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_stdbool.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,34 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef VCOS_STDBOOL_H ++#define VCOS_STDBOOL_H ++ ++#ifndef __cplusplus ++ ++#if defined(__STDC__) && (__STDC_VERSION__ >= 199901L) ++#include ++#else ++typedef enum { ++ false, ++ true ++} bool; ++#endif ++ ++#endif /* __cplusplus */ ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_stdint.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_stdint.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_stdint.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_stdint.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,203 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef VCOS_STDINT_H ++#define VCOS_STDINT_H ++ ++/* Attempt to provide the types defined in stdint.h. ++ * ++ * Ideally this would either call out to a platform-specific ++ * header file (e.g. stdint.h) or define the types on a ++ * per-architecture/compiler basis. But for now we just ++ * use #ifdefs. ++ */ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#ifdef __SYMBIAN32__ ++ ++typedef signed char int8_t; ++typedef unsigned char uint8_t; ++ ++typedef signed short int16_t; ++typedef unsigned short uint16_t; ++ ++typedef int16_t int_least16_t; ++ ++typedef signed long int32_t; ++typedef unsigned long uint32_t; ++ ++typedef signed long long int64_t; ++typedef unsigned long long uint64_t; ++ ++typedef int32_t intptr_t; ++typedef uint32_t uintptr_t; ++ ++typedef int64_t intmax_t; ++typedef uint64_t uintmax_t; ++ ++#define INT8_MIN SCHAR_MIN ++#define INT8_MAX SCHAR_MAX ++#define UINT8_MAX UCHAR_MAX ++#define INT16_MIN SHRT_MIN ++#define INT16_MAX SHRT_MAX ++#define UINT16_MAX USHRT_MAX ++#define INT32_MIN LONG_MIN ++#define INT32_MAX LONG_MAX ++#define UINT32_MAX ULONG_MAX ++#define INT64_MIN LLONG_MIN ++#define INT64_MAX LLONG_MAX ++#define UINT64_MAX ULLONG_MAX ++ ++#define INTPTR_MIN INT32_MIN ++#define INTPTR_MAX INT32_MAX ++#define UINTPTR_MAX UINT32_MAX ++#define INTMAX_MIN INT64_MIN ++#define INTMAX_MAX INT64_MAX ++#define INT_LEAST16_MAX INT16_MAX ++#define INT_LEAST16_MAX INT16_MAX ++ ++/*{{{ C99 types - THIS WHOLE SECTION IS INCOMPATIBLE WITH C99. IT SHOULD RESIDE IN A STDINT.H SINCE THIS FILE GETS USED ON HOST SIDE */ ++ ++#elif defined( __STDC__ ) && __STDC_VERSION__ >= 199901L ++ ++#include ++ ++#elif defined( __GNUC__ ) ++ ++#include ++ ++#elif defined(_MSC_VER) /* Visual C define equivalent types */ ++ ++#include /* Avoids intptr_t being defined in vadefs.h */ ++ ++typedef __int8 int8_t; ++typedef unsigned __int8 uint8_t; ++ ++typedef __int16 int16_t; ++typedef unsigned __int16 uint16_t; ++ ++typedef __int32 int32_t; ++typedef unsigned __int32 uint32_t; ++ ++typedef __int64 int64_t; ++typedef unsigned __int64 uint64_t; ++typedef uint32_t uintptr_t; ++typedef int64_t intmax_t; ++typedef uint64_t uintmax_t; ++typedef int16_t int_least16_t; ++ ++#elif defined (VCMODS_LCC) ++#include ++ ++typedef signed char int8_t; ++typedef unsigned char uint8_t; ++ ++typedef signed short int16_t; ++typedef unsigned short uint16_t; ++ ++typedef signed long int32_t; ++typedef unsigned long uint32_t; ++ ++typedef signed long int64_t; /*!!!! PFCD, this means code using 64bit numbers will be broken on the VCE */ ++typedef unsigned long uint64_t; /* !!!! PFCD */ ++ ++typedef int32_t intptr_t; ++typedef uint32_t uintptr_t; ++typedef int64_t intmax_t; ++typedef uint64_t uintmax_t; ++typedef int16_t int_least16_t; ++ ++#define INT8_MIN SCHAR_MIN ++#define INT8_MAX SCHAR_MAX ++#define UINT8_MAX UCHAR_MAX ++#define INT16_MIN SHRT_MIN ++#define INT16_MAX SHRT_MAX ++#define UINT16_MAX USHRT_MAX ++#define INT32_MIN LONG_MIN ++#define INT32_MAX LONG_MAX ++#define UINT32_MAX ULONG_MAX ++#define INT64_MIN LONG_MIN /* !!!! PFCD */ ++#define INT64_MAX LONG_MAX /* !!!! PFCD */ ++#define UINT64_MAX ULONG_MAX /* !!!! PFCD */ ++ ++#define INTPTR_MIN INT32_MIN ++#define INTPTR_MAX INT32_MAX ++#define UINTPTR_MAX UINT32_MAX ++#define INTMAX_MIN INT64_MIN ++#define INTMAX_MIN INT64_MIN ++#define INT_LEAST16_MAX INT16_MAX ++#define INT_LEAST16_MAX INT16_MAX ++ ++#elif defined(__VIDEOCORE__) ++ ++typedef signed char int8_t; ++typedef unsigned char uint8_t; ++ ++typedef signed short int16_t; ++typedef unsigned short uint16_t; ++ ++typedef signed long int32_t; ++typedef unsigned long uint32_t; ++ ++typedef signed long long int64_t; ++typedef unsigned long long uint64_t; ++ ++typedef int32_t intptr_t; ++typedef uint32_t uintptr_t; ++typedef int64_t intmax_t; ++typedef uint64_t uintmax_t; ++typedef int16_t int_least16_t; ++ ++#define INT8_MIN SCHAR_MIN ++#define INT8_MAX SCHAR_MAX ++#define UINT8_MAX UCHAR_MAX ++#define INT16_MIN SHRT_MIN ++#define INT16_MAX SHRT_MAX ++#define UINT16_MAX USHRT_MAX ++#define INT32_MIN LONG_MIN ++#define INT32_MAX LONG_MAX ++#define UINT32_MAX ULONG_MAX ++#define INT64_MIN LLONG_MIN ++#define INT64_MAX LLONG_MAX ++#define UINT64_MAX ULLONG_MAX ++ ++#define INTPTR_MIN INT32_MIN ++#define INTPTR_MAX INT32_MAX ++#define UINTPTR_MAX UINT32_MAX ++#define INTMAX_MIN INT64_MIN ++#define INTMAX_MAX INT64_MAX ++#define INT_LEAST16_MAX INT16_MAX ++#define INT_LEAST16_MAX INT16_MAX ++ ++#elif defined (__HIGHC__) && defined(_I386) ++ ++#include ++ ++#else ++#error Unknown platform ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++#endif /* VCOS_STDINT_H */ ++ ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_string.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_string.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_string.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_string.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,84 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - public header file ++=============================================================================*/ ++ ++#ifndef VCOS_STRING_H ++#define VCOS_STRING_H ++ ++/** ++ * \file ++ * ++ * String functions. ++ * ++ */ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++#ifdef __KERNEL__ ++#include ++#else ++#include ++#endif ++ ++/** Case insensitive string comparison. ++ * ++ */ ++ ++VCOS_INLINE_DECL ++int vcos_strcasecmp(const char *s1, const char *s2); ++ ++VCOS_INLINE_DECL ++int vcos_strncasecmp(const char *s1, const char *s2, size_t n); ++ ++VCOSPRE_ int VCOSPOST_ vcos_vsnprintf( char *buf, size_t buflen, const char *fmt, va_list ap ); ++ ++VCOSPRE_ int VCOSPOST_ vcos_snprintf(char *buf, size_t buflen, const char *fmt, ...); ++ ++VCOS_STATIC_INLINE ++int vcos_strlen(const char *s) { return (int)strlen(s); } ++ ++VCOS_STATIC_INLINE ++int vcos_strcmp(const char *s1, const char *s2) { return strcmp(s1,s2); } ++ ++VCOS_STATIC_INLINE ++int vcos_strncmp(const char *cs, const char *ct, size_t count) { return strncmp(cs, ct, count); } ++ ++VCOS_STATIC_INLINE ++char *vcos_strcpy(char *dst, const char *src) { return strcpy(dst, src); } ++ ++VCOS_STATIC_INLINE ++char *vcos_strncpy(char *dst, const char *src, size_t count) { return strncpy(dst, src, count); } ++ ++VCOS_STATIC_INLINE ++void *vcos_memcpy(void *dst, const void *src, size_t n) { memcpy(dst, src, n); return dst; } ++ ++VCOS_STATIC_INLINE ++void *vcos_memset(void *p, int c, size_t n) { return memset(p, c, n); } ++ ++#ifdef __cplusplus ++} ++#endif ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_thread_attr.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_thread_attr.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_thread_attr.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_thread_attr.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,87 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - thread attributes ++=============================================================================*/ ++ ++#ifndef VCOS_THREAD_ATTR_H ++#define VCOS_THREAD_ATTR_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** ++ * \file ++ * ++ * Attributes for thread creation. ++ * ++ */ ++ ++/** Initialize thread attribute struct. This call does not allocate memory, ++ * and so cannot fail. ++ * ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_thread_attr_init(VCOS_THREAD_ATTR_T *attrs); ++ ++/** Set the stack address and size. If not set, a stack will be allocated automatically. ++ * ++ * This can only be set on some platforms. It will always be possible to set the stack ++ * address on VideoCore, but on host platforms, support may well not be available. ++ */ ++#if VCOS_CAN_SET_STACK_ADDR ++VCOS_INLINE_DECL ++void vcos_thread_attr_setstack(VCOS_THREAD_ATTR_T *attrs, void *addr, VCOS_UNSIGNED sz); ++#endif ++ ++/** Set the stack size. If not set, a default size will be used. Attempting to call this after having ++ * set the stack location with vcos_thread_attr_setstack() will result in undefined behaviour. ++ */ ++VCOS_INLINE_DECL ++void vcos_thread_attr_setstacksize(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED sz); ++ ++/** Set the task priority. If not set, a default value will be used. ++ */ ++VCOS_INLINE_DECL ++void vcos_thread_attr_setpriority(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED pri); ++ ++/** Set the task cpu affinity. If not set, the default will be used. ++ */ ++VCOS_INLINE_DECL ++void vcos_thread_attr_setaffinity(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED aff); ++ ++/** Set the timeslice. If not set the default will be used. ++ */ ++VCOS_INLINE_DECL ++void vcos_thread_attr_settimeslice(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED ts); ++ ++/** The thread entry function takes (argc,argv), as per Nucleus, with ++ * argc being 0. This may be withdrawn in a future release and should not ++ * be used in new code. ++ */ ++VCOS_INLINE_DECL ++void _vcos_thread_attr_setlegacyapi(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED legacy); ++ ++VCOS_INLINE_DECL ++void vcos_thread_attr_setautostart(VCOS_THREAD_ATTR_T *attrs, VCOS_UNSIGNED autostart); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_thread.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_thread.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_thread.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_thread.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,270 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - public header file ++=============================================================================*/ ++ ++#ifndef VCOS_THREAD_H ++#define VCOS_THREAD_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** ++ * \file vcos_thread.h ++ * ++ * \section thread Threads ++ * ++ * Under Nucleus, a thread is created by NU_Create_Task, passing in the stack ++ * and various other parameters. To stop the thread, NU_Terminate_Thread() and ++ * NU_Delete_Thread() are called. ++ * ++ * Unfortunately it's not possible to emulate this API under some fairly common ++ * operating systems. Under Windows you can't pass in the stack, and you can't ++ * safely terminate a thread. ++ * ++ * Therefore, an API which is similar to the pthreads API is used instead. This ++ * API can (mostly) be emulated under all interesting operating systems. ++ * ++ * Obviously this makes the code somewhat more complicated on VideoCore than it ++ * would otherwise be - we end up with an extra mutex per thread, and some code ++ * that waits for it. The benefit is that we have a single way of creating ++ * threads that works consistently on all platforms (apart from stack supplying). ++ * ++ * \subsection stack Stack ++ * ++ * It's still not possible to pass in the stack address, but this can be made ++ * much more obvious in the API: the relevant function is missing and the ++ * CPP symbol VCOS_CAN_SET_STACK_ADDR is zero rather than one. ++ * ++ * \subsection thr_create Creating a thread ++ * ++ * The simplest way to create a thread is with vcos_thread_create() passing in a ++ * NULL thread parameter argument. To wait for the thread to exit, call ++ * vcos_thread_join(). ++ * ++ * \subsection back Backward compatibility ++ * ++ * To ease migration, a "classic" thread creation API is provided for code ++ * that used to make use of Nucleus, vcos_thread_create_classic(). The ++ * arguments are not exactly the same, as the PREEMPT parameter is dropped. ++ * ++ */ ++ ++#define VCOS_AFFINITY_CPU0 _VCOS_AFFINITY_CPU0 ++#define VCOS_AFFINITY_CPU1 _VCOS_AFFINITY_CPU1 ++#define VCOS_AFFINITY_MASK _VCOS_AFFINITY_MASK ++#define VCOS_AFFINITY_DEFAULT _VCOS_AFFINITY_DEFAULT ++#define VCOS_AFFINITY_THISCPU _VCOS_AFFINITY_THISCPU ++ ++/** Report whether or not we have an RTOS at all, and hence the ability to ++ * create threads. ++ */ ++VCOSPRE_ int VCOSPOST_ vcos_have_rtos(void); ++ ++/** Create a thread. It must be cleaned up by calling vcos_thread_join(). ++ * ++ * @param thread Filled in on return with thread ++ * @param name A name for the thread. May be the empty string. ++ * @param attrs Attributes; default attributes will be used if this is NULL. ++ * @param entry Entry point. ++ * @param arg Argument passed to the entry point. ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_thread_create(VCOS_THREAD_T *thread, ++ const char *name, ++ VCOS_THREAD_ATTR_T *attrs, ++ VCOS_THREAD_ENTRY_FN_T entry, ++ void *arg); ++ ++/** Exit the thread from within the thread function itself. ++ * Resources must still be cleaned up via a call to thread_join(). ++ * ++ * The thread can also be terminated by simply exiting the thread function. ++ * ++ * @param data Data passed to thread_join. May be NULL. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_thread_exit(void *data); ++ ++/** Wait for a thread to terminate and then clean up its resources. ++ * ++ * @param thread Thread to wait for ++ * @param pData Updated to point at data provided in vcos_thread_exit or exit ++ * code of thread function. ++ */ ++VCOSPRE_ void VCOSPOST_ vcos_thread_join(VCOS_THREAD_T *thread, ++ void **pData); ++ ++ ++/** ++ * \brief Create a thread using an API similar to the one "traditionally" ++ * used under Nucleus. ++ * ++ * This creates a thread which must be cleaned up by calling vcos_thread_join(). ++ * The thread cannot be simply terminated (as in Nucleus and ThreadX) as thread ++ * termination is not universally supported. ++ * ++ * @param thread Filled in with thread instance ++ * @param name An optional name for the thread. NULL or "" may be used (but ++ * a name will aid in debugging). ++ * @param entry Entry point ++ * @param arg A single argument passed to the entry point function ++ * @param stack Pointer to stack address ++ * @param stacksz Size of stack in bytes ++ * @param priaff Priority of task, between VCOS_PRI_LOW and VCOS_PRI_HIGH, ORed with the CPU affinity ++ * @param autostart If non-zero the thread will start immediately. ++ * @param timeslice Timeslice (system ticks) for this thread. ++ * ++ * @sa vcos_thread_terminate vcos_thread_delete ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_thread_create_classic(VCOS_THREAD_T *thread, ++ const char *name, ++ void *(*entry)(void *arg), ++ void *arg, ++ void *stack, ++ VCOS_UNSIGNED stacksz, ++ VCOS_UNSIGNED priaff, ++ VCOS_UNSIGNED timeslice, ++ VCOS_UNSIGNED autostart); ++ ++/** ++ * \brief Set a thread's priority ++ * ++ * Set the priority for a thread. ++ * ++ * @param thread The thread ++ * @param pri Thread priority in VCOS_PRI_MASK bits; affinity in VCOS_AFFINITY_MASK bits. ++ */ ++VCOS_INLINE_DECL ++void vcos_thread_set_priority(VCOS_THREAD_T *thread, VCOS_UNSIGNED pri); ++ ++/** ++ * \brief Return the currently executing thread. ++ * ++ */ ++VCOS_INLINE_DECL ++VCOS_THREAD_T *vcos_thread_current(void); ++ ++/** ++ * \brief Return the thread's priority. ++ */ ++VCOS_INLINE_DECL ++VCOS_UNSIGNED vcos_thread_get_priority(VCOS_THREAD_T *thread); ++ ++/** ++ * \brief Return the thread's cpu affinity. ++ */ ++VCOS_INLINE_DECL ++VCOS_UNSIGNED vcos_thread_get_affinity(VCOS_THREAD_T *thread); ++ ++/** ++ * \brief Set the thread's cpu affinity. ++ */ ++ ++VCOS_INLINE_DECL ++void vcos_thread_set_affinity(VCOS_THREAD_T *thread, VCOS_UNSIGNED affinity); ++ ++/** ++ * \brief Query whether we are in an interrupt. ++ * ++ * @return 1 if in interrupt context. ++ */ ++VCOS_INLINE_DECL ++int vcos_in_interrupt(void); ++ ++/** ++ * \brief Sleep a while. ++ * ++ * @param ms Number of milliseconds to sleep for ++ * ++ * This may actually sleep a whole number of ticks. ++ */ ++VCOS_INLINE_DECL ++void vcos_sleep(uint32_t ms); ++ ++/** ++ * \brief Return the value of the hardware microsecond counter. ++ * ++ */ ++VCOS_INLINE_DECL ++uint32_t vcos_getmicrosecs(void); ++ ++#define vcos_get_ms() (vcos_getmicrosecs()/1000) ++ ++/** ++ * \brief Return a unique identifier for the current process ++ * ++ */ ++VCOS_INLINE_DECL ++VCOS_UNSIGNED vcos_process_id_current(void); ++ ++/** Relinquish this time slice. */ ++VCOS_INLINE_DECL ++void vcos_thread_relinquish(void); ++ ++/** Return the name of the given thread. ++ */ ++VCOSPRE_ const char * VCOSPOST_ vcos_thread_get_name(const VCOS_THREAD_T *thread); ++ ++/** Change preemption. This is almost certainly not what you want, as it won't ++ * work reliably in a multicore system: although you can affect the preemption ++ * on *this* core, you won't affect what's happening on the other core(s). ++ * ++ * It's mainly here to ease migration. If you're using it in new code, you ++ * probably need to think again. ++ * ++ * @param pe New preemption, VCOS_PREEMPT or VCOS_NO_PREEMPT ++ * @return Old value of preemption. ++ */ ++VCOS_INLINE_DECL ++VCOS_UNSIGNED vcos_change_preemption(VCOS_UNSIGNED pe); ++ ++/** Is a thread still running, or has it exited? ++ * ++ * Note: this exists for some fairly scary code in the video codec tests. Don't ++ * try to use it for anything else, as it may well not do what you expect. ++ * ++ * @param thread thread to query ++ * @return non-zero if thread is running, or zero if it has exited. ++ */ ++VCOS_INLINE_DECL ++int vcos_thread_running(VCOS_THREAD_T *thread); ++ ++/** Resume a thread. ++ * ++ * @param thread thread to resume ++ */ ++VCOS_INLINE_DECL ++void vcos_thread_resume(VCOS_THREAD_T *thread); ++ ++/* ++ * Internal APIs - may not always be present and should not be used in ++ * client code. ++ */ ++ ++extern void _vcos_task_timer_set(void (*pfn)(void*), void *, VCOS_UNSIGNED ms); ++extern void _vcos_task_timer_cancel(void); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_timer.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_timer.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_timer.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_timer.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,106 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - timer support ++=============================================================================*/ ++ ++#ifndef VCOS_TIMER_H ++#define VCOS_TIMER_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "interface/vcos/vcos_types.h" ++#include "vcos_platform.h" ++ ++/** \file vcos_timer.h ++ * ++ * Timers are single shot. ++ * ++ * Timer times are in milliseconds. ++ * ++ * \note that timer callback functions are called from an arbitrary thread ++ * context. The expiration function should do its work as quickly as possible; ++ * blocking should be avoided. ++ * ++ * \note On Windows, the separate function vcos_timer_init() must be called ++ * as timer initialization from DllMain is not possible. ++ */ ++ ++/** Perform timer subsystem initialization. This function is not needed ++ * on non-Windows platforms but is still present so that it can be ++ * called. On Windows it is needed because vcos_init() gets called ++ * from DLL initialization where it is not possible to create a ++ * time queue (deadlock occurs if you try). ++ * ++ * @return VCOS_SUCCESS on success. VCOS_EEXIST if this has already been called ++ * once. VCOS_ENOMEM if resource allocation failed. ++ */ ++VCOSPRE_ VCOS_STATUS_T VCOSPOST_ vcos_timer_init(void); ++ ++/** Create a timer in a disabled state. ++ * ++ * The timer is initially disabled. ++ * ++ * @param timer timer handle ++ * @param name name for timer ++ * @param expiration_routine function to call when timer expires ++ * @param context context passed to expiration routine ++ * ++ */ ++VCOS_INLINE_DECL ++VCOS_STATUS_T vcos_timer_create(VCOS_TIMER_T *timer, ++ const char *name, ++ void (*expiration_routine)(void *context), ++ void *context); ++ ++ ++ ++/** Start a timer running. ++ * ++ * Timer must be stopped. ++ * ++ * @param timer timer handle ++ * @param delay Delay to wait for, in ms ++ */ ++VCOS_INLINE_DECL ++void vcos_timer_set(VCOS_TIMER_T *timer, VCOS_UNSIGNED delay); ++ ++/** Stop an already running timer. ++ * ++ * @param timer timer handle ++ */ ++VCOS_INLINE_DECL ++void vcos_timer_cancel(VCOS_TIMER_T *timer); ++ ++/** Stop a timer and restart it. ++ * @param timer timer handle ++ * @param delay delay in ms ++ */ ++VCOS_INLINE_DECL ++void vcos_timer_reset(VCOS_TIMER_T *timer, VCOS_UNSIGNED delay); ++ ++VCOS_INLINE_DECL ++void vcos_timer_delete(VCOS_TIMER_T *timer); ++ ++#ifdef __cplusplus ++} ++#endif ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_types.h bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_types.h +--- upstream-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_types.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/interface/vcos/vcos_types.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,211 @@ ++/* ++ * Copyright (c) 2010-2011 Broadcom. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/*============================================================================= ++VideoCore OS Abstraction Layer - basic types ++=============================================================================*/ ++ ++#ifndef VCOS_TYPES_H ++#define VCOS_TYPES_H ++ ++#define VCOS_VERSION 1 ++ ++#include "vcos_platform_types.h" ++ ++#if !defined(VCOSPRE_) || !defined(VCOSPOST_) ++#error VCOSPRE_ and VCOSPOST_ not defined! ++#endif ++ ++/* Redefine these here; this means that existing header files can carry on ++ * using the VCHPOST/VCHPRE macros rather than having huge changes, which ++ * could cause nasty merge problems. ++ */ ++#ifndef VCHPOST_ ++#define VCHPOST_ VCOSPOST_ ++#endif ++#ifndef VCHPRE_ ++#define VCHPRE_ VCOSPRE_ ++#endif ++ ++/** Entry function for a lowlevel thread. ++ * ++ * Returns void for consistency with Nucleus/ThreadX. ++ */ ++typedef void (*VCOS_LLTHREAD_ENTRY_FN_T)(void *); ++ ++/** Thread entry point. Returns a void* for consistency ++ * with pthreads. ++ */ ++typedef void *(*VCOS_THREAD_ENTRY_FN_T)(void*); ++ ++ ++/* Error return codes - chosen to be similar to errno values */ ++typedef enum ++{ ++ VCOS_SUCCESS, ++ VCOS_EAGAIN, ++ VCOS_ENOENT, ++ VCOS_ENOSPC, ++ VCOS_EINVAL, ++ VCOS_EACCESS, ++ VCOS_ENOMEM, ++ VCOS_ENOSYS, ++ VCOS_EEXIST, ++ VCOS_ENXIO, ++ VCOS_EINTR ++} VCOS_STATUS_T; ++ ++/* Some compilers (MetaWare) won't inline with -g turned on, which then results ++ * in a lot of code bloat. To overcome this, inline functions are forward declared ++ * with the prefix VCOS_INLINE_DECL, and implemented with the prefix VCOS_INLINE_IMPL. ++ * ++ * That then means that in a release build, "static inline" can be used in the obvious ++ * way, but in a debug build the implementations can be skipped in all but one file, ++ * by using VCOS_INLINE_BODIES. ++ * ++ * VCOS_INLINE_DECL - put this at the start of an inline forward declaration of a VCOS ++ * function. ++ * ++ * VCOS_INLINE_IMPL - put this at the start of an inlined implementation of a VCOS ++ * function. ++ * ++ */ ++ ++/* VCOS_EXPORT - it turns out that in some circumstances we need the implementation of ++ * a function even if it is usually inlined. ++ * ++ * In particular, if we have a codec that is usually provided in object form, if it ++ * was built for a debug build it will be full of calls to vcos_XXX(). If this is used ++ * in a *release* build, then there won't be any of these calls around in the main image ++ * as they will all have been inlined. The problem also exists for vcos functions called ++ * from assembler. ++ * ++ * VCOS_EXPORT ensures that the named function will be emitted as a regular (not static-inline) ++ * function inside vcos_.c so that it can be linked against. Doing this for every ++ * VCOS function would be a bit code-bloat-tastic, so it is only done for those that need it. ++ * ++ */ ++ ++#ifdef __cplusplus ++#define _VCOS_INLINE inline ++#else ++#define _VCOS_INLINE __inline ++#endif ++ ++#if defined(NDEBUG) ++ ++#ifdef __GNUC__ ++# define VCOS_INLINE_DECL extern __inline__ ++# define VCOS_INLINE_IMPL static __inline__ ++#else ++# define VCOS_INLINE_DECL static _VCOS_INLINE /* declare a func */ ++# define VCOS_INLINE_IMPL static _VCOS_INLINE /* implement a func inline */ ++#endif ++ ++# if defined(VCOS_WANT_IMPL) ++# define VCOS_EXPORT ++# else ++# define VCOS_EXPORT VCOS_INLINE_IMPL ++# endif /* VCOS_WANT_IMPL */ ++ ++#define VCOS_INLINE_BODIES ++ ++#else /* NDEBUG */ ++ ++#if !defined(VCOS_INLINE_DECL) ++ #define VCOS_INLINE_DECL extern ++#endif ++#if !defined(VCOS_INLINE_IMPL) ++ #define VCOS_INLINE_IMPL ++#endif ++#define VCOS_EXPORT VCOS_INLINE_IMPL ++#endif ++ ++#define VCOS_STATIC_INLINE static _VCOS_INLINE ++ ++#if defined(__HIGHC__) || defined(__HIGHC_ANSI__) ++#define _VCOS_METAWARE ++#endif ++ ++/** It seems that __FUNCTION__ isn't standard! ++ */ ++#if __STDC_VERSION__ < 199901L ++# if __GNUC__ >= 2 || defined(__VIDEOCORE__) ++# define VCOS_FUNCTION __FUNCTION__ ++# else ++# define VCOS_FUNCTION "" ++# endif ++#else ++# define VCOS_FUNCTION __func__ ++#endif ++ ++#define _VCOS_MS_PER_TICK (1000/VCOS_TICKS_PER_SECOND) ++ ++/* Convert a number of milliseconds to a tick count. Internal use only - fails to ++ * convert VCOS_SUSPEND correctly. ++ */ ++#define _VCOS_MS_TO_TICKS(ms) (((ms)+_VCOS_MS_PER_TICK-1)/_VCOS_MS_PER_TICK) ++ ++#define VCOS_TICKS_TO_MS(ticks) ((ticks) * _VCOS_MS_PER_TICK) ++ ++/** VCOS version of DATESTR, from pcdisk.h. Used by the hostreq service. ++ */ ++typedef struct vcos_datestr ++{ ++ uint8_t cmsec; /**< Centesimal mili second */ ++ uint16_t date; /**< Date */ ++ uint16_t time; /**< Time */ ++ ++} VCOS_DATESTR; ++ ++/* Compile-time assert - declares invalid array length if condition ++ * not met, or array of length one if OK. ++ */ ++#define VCOS_CASSERT(e) extern char vcos_compile_time_check[1/(e)] ++ ++#define vcos_min(x,y) ((x) < (y) ? (x) : (y)) ++#define vcos_max(x,y) ((x) > (y) ? (x) : (y)) ++ ++/** Return the count of an array. FIXME: under gcc we could make ++ * this report an error for pointers using __builtin_types_compatible(). ++ */ ++#define vcos_countof(x) (sizeof((x)) / sizeof((x)[0])) ++ ++/* for backward compatibility */ ++#define countof(x) (sizeof((x)) / sizeof((x)[0])) ++ ++#define VCOS_ALIGN_DOWN(p,n) (((ptrdiff_t)(p)) & ~((n)-1)) ++#define VCOS_ALIGN_UP(p,n) VCOS_ALIGN_DOWN((ptrdiff_t)(p)+(n)-1,(n)) ++ ++/** bool_t is not a POSIX type so cannot rely on it. Define it here. ++ * It's not even defined in stdbool.h. ++ */ ++typedef int32_t vcos_bool_t; ++typedef int32_t vcos_fourcc_t; ++ ++#define VCOS_FALSE 0 ++#define VCOS_TRUE (!VCOS_FALSE) ++ ++/** Mark unused arguments to keep compilers quiet */ ++#define vcos_unused(x) (void)(x) ++ ++/** For backward compatibility */ ++typedef vcos_fourcc_t fourcc_t; ++typedef vcos_fourcc_t FOURCC_T; ++ ++#endif +diff -urN upstream-3.2.21/drivers/misc/vc04_services/Kconfig bootc-3.2.21/drivers/misc/vc04_services/Kconfig +--- upstream-3.2.21/drivers/misc/vc04_services/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/Kconfig 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,7 @@ ++config BCM2708_VCHIQ ++ tristate "Videocore VCHIQ" ++ depends on MACH_BCM2708 ++ default y ++ help ++ Helper for communication for VideoCore. ++ +diff -urN upstream-3.2.21/drivers/misc/vc04_services/Makefile bootc-3.2.21/drivers/misc/vc04_services/Makefile +--- upstream-3.2.21/drivers/misc/vc04_services/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/misc/vc04_services/Makefile 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,21 @@ ++obj-$(CONFIG_BCM2708_VCHIQ) += vchiq.o ++ ++vchiq-objs := \ ++ interface/vchiq_arm/vchiq_core.o \ ++ interface/vchiq_arm/vchiq_shim.o \ ++ interface/vchiq_arm/vchiq_util.o \ ++ interface/vchiq_arm/vchiq_arm.o \ ++ interface/vchiq_arm/vchiq_kern_lib.o \ ++ interface/vchiq_arm/vchiq_2835_arm.o \ ++ interface/vcos/linuxkernel/vcos_linuxkernel.o \ ++ interface/vcos/linuxkernel/vcos_thread_map.o \ ++ interface/vcos/linuxkernel/vcos_linuxkernel_cfg.o \ ++ interface/vcos/generic/vcos_generic_event_flags.o \ ++ interface/vcos/generic/vcos_logcat.o \ ++ interface/vcos/generic/vcos_mem_from_malloc.o \ ++ interface/vcos/generic/vcos_cmd.o ++ ++EXTRA_CFLAGS += -DVCOS_VERIFY_BKPTS=1 -DUSE_VCHIQ_ARM -D__VCCOREVER__=0x04000000 -Idrivers/misc/vc04_services -Idrivers/misc/vc04_services/interface/vcos/linuxkernel ++ ++ ++ +diff -urN upstream-3.2.21/drivers/mmc/core/core.c bootc-3.2.21/drivers/mmc/core/core.c +--- upstream-3.2.21/drivers/mmc/core/core.c 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/mmc/core/core.c 2012-06-23 23:52:03.000000000 +0000 +@@ -514,10 +514,14 @@ + + if (data->flags & MMC_DATA_WRITE) + /* +- * The limit is really 250 ms, but that is +- * insufficient for some crappy cards. ++ * The MMC spec "It is strongly recommended ++ * for hosts to implement more than 500ms ++ * timeout value even if the card indicates ++ * the 250ms maximum busy length." Even the ++ * previous value of 300ms is known to be ++ * insufficient for some cards. + */ +- limit_us = 300000; ++ limit_us = 3000000; + else + limit_us = 100000; + +diff -urN upstream-3.2.21/drivers/mmc/host/bcm2708_mci.c bootc-3.2.21/drivers/mmc/host/bcm2708_mci.c +--- upstream-3.2.21/drivers/mmc/host/bcm2708_mci.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/mmc/host/bcm2708_mci.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,889 @@ ++/* ++ * linux/drivers/mmc/host/bcm2708_mci.c - Broadcom BCM2708 MCI driver ++ * ++ * Copyright (C) 2010 Broadcom, All Rights Reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++//#include ++ ++#include ++ ++#include "bcm2708_mci.h" ++ ++#define DRIVER_NAME "bcm2708_mci" ++ ++//#define PIO_DEBUG ++#ifdef PIO_DEBUG ++#define DBG(host,fmt,args...) \ ++ printk(KERN_ERR"%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args) ++#else ++#define DBG(host,fmt,args...) \ ++ pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args) ++#endif ++ ++#define USE_DMA ++#define USE_DMA_IRQ ++ ++#ifdef USE_DMA ++#define SDHOST_DMA_CHANNEL 5 ++#endif ++ ++#define BCM2708_DMA_ACTIVE (1 << 0) ++#define BCM2708_DMA_INT (1 << 2) ++ ++#define BCM2708_DMA_INT_EN (1 << 0) ++#define BCM2708_DMA_D_INC (1 << 4) ++#define BCM2708_DMA_D_WIDTH (1 << 5) ++#define BCM2708_DMA_D_DREQ (1 << 6) ++#define BCM2708_DMA_S_INC (1 << 8) ++#define BCM2708_DMA_S_WIDTH (1 << 9) ++#define BCM2708_DMA_S_DREQ (1 << 10) ++ ++#define BCM2708_DMA_PER_MAP(x) ((x) << 16) ++ ++#define BCM2708_DMA_DREQ_SDHOST 13 ++ ++#define BCM2708_DMA_CS 0x00 ++#define BCM2708_DMA_ADDR 0x04 ++ ++static void dump_sd_regs(void * mmc_base ); ++static int bcm2708_mci_reset(struct bcm2708_mci_host *host); ++ ++static void do_command(void __iomem *base, u32 c, u32 a) ++{ ++ u32 cmdsts = 0; ++ writel(a, base + BCM2708_MCI_ARGUMENT); ++ writel(c | BCM2708_MCI_ENABLE, base + BCM2708_MCI_COMMAND); ++ ++ /* check for error and command done */ ++ cmdsts = readl(base + BCM2708_MCI_COMMAND); ++ while ((cmdsts & BCM2708_MCI_ENABLE) && (!(cmdsts & BCM2708_MCI_FAIL_FLAG))) ++ cmdsts = readl(base + BCM2708_MCI_COMMAND); ++ if (cmdsts & BCM2708_MCI_FAIL_FLAG) { ++ printk(KERN_DEBUG"%s: Command %d failed with arg %d\n", __func__, c, a); ++ dump_sd_regs(base); ++ } ++} ++ ++//static void discard_words(void __iomem *base, int words) ++//{ ++// int i; ++// for (i = 0; i < words; i++) { ++// while (!(readl(base + BCM2708_MCI_STATUS) & BCM2708_MCI_DATAFLAG)); ++// readl(base + BCM2708_MCI_DATA); ++// } ++//} ++ ++#define CACHE_LINE_MASK 31 ++ ++static int suitable_for_dma(struct scatterlist *sg_ptr, int sg_len) ++{ ++ int i; ++ ++ for (i = 0; i < sg_len; i++) { ++ if (sg_ptr[i].offset & CACHE_LINE_MASK || sg_ptr[i].length & CACHE_LINE_MASK) ++ return 0; ++ } ++ ++ return 1; ++} ++ ++static void wait_for_complete(struct bcm2708_mci_host *host, ++ void __iomem *mmc_base) ++{ ++#ifdef USE_SDHOST_IRQ ++#error not implemented yet ++#else ++ while ((readl(mmc_base + BCM2708_MCI_STATUS) & ++ (BCM2708_MCI_HSTS_BUSY | BCM2708_MCI_HSTS_BLOCK)) == 0) ++ continue; ++ ++ writel(BCM2708_MCI_HSTS_BUSY | BCM2708_MCI_HSTS_BLOCK, ++ mmc_base + BCM2708_MCI_STATUS); ++#endif ++} ++ ++static void dump_sd_regs(void * mmc_base ) ++{ ++ printk(KERN_DEBUG"Registers:\n"); ++ printk(KERN_DEBUG"SDCMD:0x%x\n", readl(mmc_base + BCM2708_MCI_COMMAND)); ++ printk(KERN_DEBUG"SDARG:0x%x\n", readl(mmc_base + BCM2708_MCI_ARGUMENT)); ++ printk(KERN_DEBUG"SDTOUT:0x%x\n", readl(mmc_base + BCM2708_MCI_TIMEOUT)); ++ printk(KERN_DEBUG"SDCDIV:0x%x\n", readl(mmc_base + BCM2708_MCI_CLKDIV)); ++ printk(KERN_DEBUG"SDRSP0:0x%x\n", readl(mmc_base + BCM2708_MCI_RESPONSE0)); ++ printk(KERN_DEBUG"SDRSP1:0x%x\n", readl(mmc_base + BCM2708_MCI_RESPONSE1)); ++ printk(KERN_DEBUG"SDRSP2:0x%x\n", readl(mmc_base + BCM2708_MCI_RESPONSE2)); ++ printk(KERN_DEBUG"SDRSP3:0x%x\n", readl(mmc_base + BCM2708_MCI_RESPONSE3)); ++ printk(KERN_DEBUG"SDHSTS:0x%x\n", readl(mmc_base + BCM2708_MCI_STATUS)); ++ printk(KERN_DEBUG"SDPO:0x%x\n", readl(mmc_base + BCM2708_MCI_VDD)); ++ printk(KERN_DEBUG"SDEDM:0x%x\n", readl(mmc_base + BCM2708_MCI_EDM)); ++ printk(KERN_DEBUG"SDHCFG:0x%x\n", readl(mmc_base + BCM2708_MCI_HOSTCONFIG)); ++ printk(KERN_DEBUG"SDHBCT:0x%x\n", readl(mmc_base + BCM2708_MCI_HBCT)); ++ //printk(KERN_ERR"SDDATA:0x%x\n", readl(mmc_base + BCM2708_MCI_DATA)); ++ printk(KERN_DEBUG"SDHBLC:0x%x\n", readl(mmc_base + BCM2708_MCI_HBLC)); ++} ++ ++ ++static void ++bcm2708_mci_start_command(struct bcm2708_mci_host *host, struct mmc_command *cmd, struct mmc_data *data) ++{ ++ void __iomem *mmc_base = host->mmc_base; ++ void __iomem *dma_base = host->dma_base; ++ u32 status; ++ u32 c; ++ int redo = 0; ++ ++ DBG(host, "op %02x arg %08x flags %08x\n", ++ cmd->opcode, cmd->arg, cmd->flags); ++ ++back: ++ ++ /* ++ * clear the controller status register ++ */ ++ ++ writel(-1, mmc_base + BCM2708_MCI_STATUS); ++ ++ /* ++ * build the command register write, incorporating no ++ * response, long response, busy, read and write flags ++ */ ++ ++ c = cmd->opcode; ++ if (cmd->flags & MMC_RSP_PRESENT) { ++ if (cmd->flags & MMC_RSP_136) ++ c |= BCM2708_MCI_LONGRESP; ++ } else ++ c |= BCM2708_MCI_NORESP; ++ if (cmd->flags & MMC_RSP_BUSY) ++ c |= BCM2708_MCI_BUSY; ++ ++ if (data) { ++ if (data->flags & MMC_DATA_READ) ++ c |= BCM2708_MCI_READ; ++ else ++ c |= BCM2708_MCI_WRITE; ++ ++ DBG(host, "BYTECOUT %d BLOCKCOUNT %d .. ",readl(mmc_base + BCM2708_MCI_HBCT), readl(mmc_base + BCM2708_MCI_HBLC)); ++ DBG(host, "set blocksize to %d\n", data->blksz); ++ DBG(host, "set blockcnt to %d\n", data->blocks); ++ writel( data->blksz, mmc_base + BCM2708_MCI_HBCT); ++ writel(data->blocks, mmc_base + BCM2708_MCI_HBLC); ++ } ++ ++ /* ++ * run the command and wait for it to complete ++ */ ++ ++ DBG(host, "executing command=%d\n", cmd->opcode); ++ ++ do_command(mmc_base, c, cmd->arg); ++ ++ DBG(host, "done cmd=%d\n", cmd->opcode); ++ ++ if (c & BCM2708_MCI_BUSY) { ++ ++ DBG(host, "waiting for command(%d) to complete\n", cmd->opcode); ++ wait_for_complete(host, mmc_base); ++ DBG(host, "done waiting for command(%d)\n", cmd->opcode); ++ } ++ ++ /* ++ * retrieve the response and error (if any) ++ */ ++ ++ status = readl(mmc_base + BCM2708_MCI_STATUS); ++ ++ if (cmd->flags & MMC_RSP_136) { ++ cmd->resp[3] = readl(mmc_base + BCM2708_MCI_RESPONSE0); ++ cmd->resp[2] = readl(mmc_base + BCM2708_MCI_RESPONSE1); ++ cmd->resp[1] = readl(mmc_base + BCM2708_MCI_RESPONSE2); ++ cmd->resp[0] = readl(mmc_base + BCM2708_MCI_RESPONSE3); ++ } else { ++ cmd->resp[0] = readl(mmc_base + BCM2708_MCI_RESPONSE0); ++ } ++ ++ if (status & BCM2708_MCI_CMDTIMEOUT) { ++ printk(KERN_DEBUG "mmc driver saw timeout with opcode = %d, data = 0x%08x, timeout = %d", cmd->opcode, (unsigned int)data, readl(mmc_base + BCM2708_MCI_TIMEOUT)); ++ if (data) ++ printk(KERN_DEBUG " data->sg_len = %d\n", data->sg_len); ++ else ++ printk(KERN_DEBUG "\n"); ++ if (!redo) { ++ printk(KERN_DEBUG "redo\n"); ++ redo = 1; ++ goto back; ++ } else ++ cmd->error = -ETIMEDOUT; ++ } ++ ++ /* ++ * pump data if necessary ++ */ ++ ++ if (data) { ++ unsigned int sg_len = data->sg_len; ++ struct scatterlist *sg_ptr = data->sg; ++ ++ data->bytes_xfered = 0; ++ ++#ifdef USE_DMA ++ if (suitable_for_dma(sg_ptr, sg_len)) { ++ int i, count = dma_map_sg(&host->dev->dev, sg_ptr, sg_len, data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE); ++ ++ for (i = 0; i < count; i++) { ++ BCM2708_DMA_CB_T *cb = &host->cb_base[i]; ++ ++ if (data->flags & MMC_DATA_READ) { ++ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_SDHOST)|BCM2708_DMA_S_DREQ|BCM2708_DMA_D_WIDTH|BCM2708_DMA_D_INC; ++ cb->src = 0x7e202040; ++ cb->dst = sg_dma_address(&sg_ptr[i]); ++ } else { ++ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_SDHOST)|BCM2708_DMA_S_WIDTH|BCM2708_DMA_S_INC|BCM2708_DMA_D_DREQ; ++ cb->src = sg_dma_address(&sg_ptr[i]); ++ cb->dst = 0x7e202040; ++ } ++ ++ cb->length = sg_dma_len(&sg_ptr[i]); ++ cb->stride = 0; ++ ++ if (i == count - 1) { ++#ifdef USE_DMA_IRQ ++ cb->info |= BCM2708_DMA_INT_EN; ++#endif ++ cb->next = 0; ++ } else ++ cb->next = host->cb_handle + (i + 1) * sizeof(BCM2708_DMA_CB_T); ++ ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++ ++ data->bytes_xfered += sg_ptr[i].length; ++ } ++ ++ dsb(); // data barrier operation ++ ++ writel(host->cb_handle, dma_base + BCM2708_DMA_ADDR); ++ writel(BCM2708_DMA_ACTIVE, dma_base + BCM2708_DMA_CS); ++ ++#ifdef USE_DMA_IRQ ++ down(&host->sem); ++#else ++ while ((readl(dma_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE)); ++#endif ++ dma_unmap_sg(&host->dev->dev, sg_ptr, sg_len, data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE); ++ } else ++#endif ++ while (sg_len) { ++ unsigned long flags; ++ char *buffer; ++ u32 *ptr, *lim; ++ ++ DBG(host, "sg_len=%d sg_ptr=%p len=%d\n", sg_len, sg_ptr, sg_ptr->length); ++ ++ /* ++ * map the current scatter buffer ++ */ ++ ++ buffer = bcm2708_mci_kmap_atomic(sg_ptr, &flags); ++ ++ /* ++ * pump the data ++ */ ++ ++ ptr = (u32 *)(buffer); ++ lim = (u32 *)(buffer + sg_ptr->length); ++ ++ while (ptr < lim) ++ { ++#ifdef PIO_DEBUG ++ unsigned int wait_count = 1; ++#endif ++ while (!(readl(mmc_base + BCM2708_MCI_STATUS) & BCM2708_MCI_DATAFLAG)) ++ { ++#ifdef PIO_DEBUG ++ wait_count++; ++ if ( 0 == (wait_count % 20000) ) { ++ ++ printk(KERN_ERR"Timeout waiting for data flag\n"); ++ dump_sd_regs(mmc_base); ++ } ++#endif ++ } ++ ++ if (data->flags & MMC_DATA_READ) ++ *ptr++ = readl(mmc_base + BCM2708_MCI_DATA); ++ else ++ { ++#ifdef PIO_DEBUG ++ uint32_t fifo_bytes, fifo_wait_count = 1; ++ ++ fifo_bytes = readl(mmc_base + BCM2708_MCI_EDM); ++ fifo_bytes = (fifo_bytes >> 4) & 0xf; ++ ++ while(fifo_bytes > 3) ++ { ++ fifo_wait_count++; ++ if ( 0 == (fifo_wait_count % 20000) ) { ++ printk(KERN_ERR"waiting for fifo_bytes < 3\n"); ++ dump_sd_regs(mmc_base); ++ } ++ ++ fifo_bytes = readl(mmc_base + BCM2708_MCI_EDM); ++ fifo_bytes = (fifo_bytes >> 4) & 0xf; ++ } ++ ++ BUG_ON(fifo_bytes > 3); ++#endif ++ writel(*ptr++, mmc_base + BCM2708_MCI_DATA); ++ } ++ } ++ ++ DBG(host, "done reading/writing %d bytes from mmc\n", sg_ptr->length); ++ ++ ++ /* ++ * unmap the buffer ++ */ ++ ++ bcm2708_mci_kunmap_atomic(buffer, &flags); ++ ++ /* ++ * if we were reading, and we have completed this ++ * page, ensure that the data cache is coherent ++ */ ++ ++ if (data->flags & MMC_DATA_READ) ++ flush_dcache_page(sg_page(sg_ptr)); ++ ++ data->bytes_xfered += sg_ptr->length; ++ ++ sg_ptr++; ++ sg_len--; ++ } ++ ++// if (host->is_acmd && cmd->opcode == SD_APP_SEND_SCR) ++// discard_words(mmc_base, 126); ++// if (host->is_acmd && cmd->opcode == SD_APP_SEND_NUM_WR_BLKS) ++// discard_words(mmc_base, 127); ++// if (!host->is_acmd && cmd->opcode == SD_SWITCH) ++// discard_words(mmc_base, 112); ++ ++ if (data->stop) { ++ ++ DBG(host, "sending stop command %p\n", data->stop); ++ bcm2708_mci_start_command(host, data->stop, 0); ++ ++ while ((readl(mmc_base + BCM2708_MCI_STATUS) & ++ BCM2708_MCI_DATAFLAG)) ++ { ++ DBG(host, "error data flag still set read=%d bytes\n", sg_ptr->length); ++ printk(KERN_ERR"SDDATA:0x%x\n", readl(mmc_base + BCM2708_MCI_DATA)); ++ dump_sd_regs(mmc_base); ++ } ++ } ++ } ++ /* ++ * remember if we're an application command ++ */ ++ host->is_acmd = cmd->opcode == MMC_APP_CMD; ++} ++ ++static void bcm2708_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct bcm2708_mci_host *host = mmc_priv(mmc); ++ ++ if (mrq->data && !is_power_of_2(mrq->data->blksz)) { ++ printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n", ++ mmc_hostname(mmc), mrq->data->blksz); ++ mrq->cmd->error = -EINVAL; ++ mmc_request_done(mmc, mrq); ++ return; ++ } ++ ++ bcm2708_mci_start_command(host, mrq->cmd, mrq->data); ++ ++ mmc_request_done(host->mmc, mrq); ++} ++ ++static void bcm2708_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ ++ struct bcm2708_mci_host *host = mmc_priv(mmc); ++ void *mmc_base = host->mmc_base; ++ ++ ++ printk(KERN_DEBUG"%s: Want to set clock: %d width: %d\n", mmc_hostname(mmc), ++ ios->clock, ios->bus_width); ++ ++ if (ios->clock == 25000000 || ios->clock == 26000000) { ++ printk(KERN_DEBUG"%s setting clock div to 10 (8+2)\n", mmc_hostname(mmc)); ++ writel(0x8, mmc_base + BCM2708_MCI_CLKDIV); ++ } else if (ios->clock == 50000000 || ios->clock == 52000000) { ++ printk(KERN_DEBUG"%s setting clock div to 5 (3+2)\n", mmc_hostname(mmc)); ++ writel(0x3, mmc_base + BCM2708_MCI_CLKDIV); ++ } else { ++ // On init or unknown clock, we set the clock really low ++ printk(KERN_DEBUG"%s Setting clock div to 0x4e0\n", mmc_hostname(mmc)); ++ writel(0x4e0, mmc_base + BCM2708_MCI_CLKDIV); ++ } ++ ++ if (ios->bus_width) { ++ uint32_t hcfg; ++ hcfg = readl(mmc_base + BCM2708_MCI_HOSTCONFIG); ++ printk(KERN_DEBUG"%s setting bus width to %d\n", mmc_hostname(mmc), ios->bus_width); ++ ++ hcfg &= BCM2708_MCI_HOSTCONFIG_WIDEEXT_CLR; ++ hcfg |= (ios->bus_width == MMC_BUS_WIDTH_4) ? BCM2708_MCI_HOSTCONFIG_WIDEEXT_4BIT : 0; ++ ++ writel(hcfg, mmc_base + BCM2708_MCI_HOSTCONFIG); ++ } ++} ++ ++static int bcm2708_mci_get_cd(struct mmc_host *mmc) ++{ ++ int present = -ENOSYS; ++ ++ struct bcm2708_mci_host *host = mmc_priv(mmc); ++ void *gpio_base = host->gpio_base; ++ ++ present = readl( (gpio_base + GP_LEV0) ); ++ ++ if ((present & (1<<29))==(1<<29)) ++ present = 0; ++ else ++ present = 1; ++ ++ printk(KERN_DEBUG"***sdcard present***=%d\n", present); ++ ++ // FIXME - For now force SD card present for 2835DK ++ present = 1; ++ return present; ++} ++ ++/* ++ * Handle completion of command and data transfers. ++ */ ++ ++//static irqreturn_t bcm2708_mci_command_irq(int irq, void *dev_id) ++//{ ++// struct bcm2708_mci_host *host = dev_id; ++// ++// writel(BCM2708_DMA_INT, host->dma_base + BCM2708_DMA_CS); ++// ++// printk(KERN_ERR "irq\n"); ++// ++// return IRQ_RETVAL(0); ++//} ++ ++static irqreturn_t bcm2708_mci_sddet_irq(int irq, void *dev_id) ++{ ++ struct bcm2708_mci_host *host = dev_id; ++ irqreturn_t handled = IRQ_NONE; ++ int present; ++ ++ present = bcm2708_mci_get_cd(host->mmc); ++ ++ if (present!=host->present) ++ { ++ host->present = present; ++ printk(KERN_DEBUG "SDDET IRQ: sdcard present: %d\n",present); ++ bcm2708_mci_reset(host); ++ mmc_detect_change(host->mmc, msecs_to_jiffies(500)); ++ } ++ ++ return IRQ_RETVAL(handled); ++} ++ ++#ifdef USE_DMA_IRQ ++static irqreturn_t bcm2708_mci_data_irq(int irq, void *dev_id) ++{ ++ struct bcm2708_mci_host *host = dev_id; ++ irqreturn_t handled = IRQ_NONE; ++ ++ if (0 != (BCM2708_DMA_INT & readl(host->dma_base + BCM2708_DMA_CS))) { ++ writel(BCM2708_DMA_INT, host->dma_base + BCM2708_DMA_CS); ++ dsb(); ++ handled = IRQ_HANDLED; ++ up(&host->sem); ++ } else { ++ printk(KERN_ERR"bcm2708_mci irq check failed !!\n"); ++ } ++ ++ return IRQ_RETVAL(handled); ++} ++#endif ++ ++static const struct mmc_host_ops bcm2708_mci_ops = { ++ .request = bcm2708_mci_request, ++ .set_ios = bcm2708_mci_set_ios, ++ .get_cd = bcm2708_mci_get_cd, ++}; ++ ++static int bcm2708_mci_reset(struct bcm2708_mci_host *host) ++{ ++ ++ void *mmc_base = host->mmc_base; ++ ++ // pin muxing/gpios is done by vcloader ++ ++ printk(KERN_DEBUG"%s:Resetting BCM2708 MCI Controller.\n", __func__ ); ++ ++ writel(0, mmc_base + BCM2708_MCI_COMMAND); ++ writel(0, mmc_base + BCM2708_MCI_ARGUMENT); ++ writel(0x00F00000, mmc_base + BCM2708_MCI_TIMEOUT); ++ writel(0, mmc_base + BCM2708_MCI_CLKDIV); ++ writel(0, mmc_base + BCM2708_MCI_STATUS); ++ writel(0, mmc_base + BCM2708_MCI_VDD); ++ writel(0, mmc_base + BCM2708_MCI_HOSTCONFIG); ++ writel(0, mmc_base + BCM2708_MCI_HBCT); ++ writel(0, mmc_base + BCM2708_MCI_HBLC); ++ ++ writel( BCM2708_MCI_HOSTCONFIG_SLOW_CARD | BCM2708_MCI_HOSTCONFIG_BUSY_IRPT_EN | ++ BCM2708_MCI_HOSTCONFIG_BLOCK_IRPT_EN | BCM2708_MCI_HOSTCONFIG_WIDE_INT_BUS, ++ mmc_base + BCM2708_MCI_HOSTCONFIG); ++ ++ // On A0 silicon it has been observed that the following must hold ++ // WRITE_THRESHOLD<=5 and READ_THRESHOLD<=WRITE_THRESHOLD+1 ++ // with the chip running at 150MHz (with the interface running @ 150/22 = 6.8 MHz) ++ // the second requirement suggests that the verilog does not properly separate the read / write FIFOs ++ // On V3XDS Read=2 & Write=6 ++ ++#define READ_THRESHOLD 3 ++#define WRITE_THRESHOLD 3 ++#if 1 // !!! This is still required, without it we get CRC16 errors in data. ++ { ++ uint32_t temp; ++ temp = readl(mmc_base + BCM2708_MCI_EDM); ++ temp &= ~((0x1F<<14) | (0x1F<<9)); ++ temp |= (WRITE_THRESHOLD << 9) | (READ_THRESHOLD << 14); ++ writel(temp, mmc_base + BCM2708_MCI_EDM); ++ } ++#endif ++ ++ // Power on delay ++ mdelay(10); ++ writel(BCM2708_MCI_VDD_ENABLE, mmc_base + BCM2708_MCI_VDD); ++ mdelay(10); ++ ++ return 0; ++} ++ ++ ++static int __devinit bcm2708_mci_probe(struct platform_device *pdev) ++{ ++ struct mmc_host *mmc; ++ struct bcm2708_mci_host *host; ++ struct resource *mmc_res; ++ struct resource *dma_res; ++ struct resource *gpio_res; ++ struct resource *dat_res; ++ struct resource *sddet_res; ++ int ret; ++ ++ mmc = mmc_alloc_host(sizeof(struct bcm2708_mci_host), &pdev->dev); ++ if (!mmc) { ++ ret = -ENOMEM; ++ dev_dbg(&pdev->dev, "couldn't allocate mmc host\n"); ++ goto fail0; ++ } ++ ++ host = mmc_priv(mmc); ++ host->mmc = mmc; ++ ++ host->dev = pdev; ++ ++ sema_init(&host->sem, 0); ++ ++#ifdef USE_DMA ++ host->cb_base = dma_alloc_writecombine(&pdev->dev, SZ_4K, &host->cb_handle, GFP_KERNEL); ++ if (!host->cb_base) { ++ ret = -ENOMEM; ++ dev_dbg(&pdev->dev, "couldn't allocate dma base\n"); ++ goto fail1; ++ } ++#endif ++ ++ mmc_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!mmc_res) { ++ ret = -ENXIO; ++ dev_dbg(&pdev->dev, "couldn't allocate mmc memory resource 0\n"); ++ goto fail2; ++ } ++ ++ if (!request_mem_region(mmc_res->start, mmc_res->end - mmc_res->start + 1, DRIVER_NAME)) { ++ ret = -EBUSY; ++ goto fail2; ++ } ++ ++ dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ if (!dma_res) { ++ ret = -ENXIO; ++ dev_dbg(&pdev->dev, "couldn't allocate dma memory resource 1\n"); ++ goto fail3; ++ } ++ ++ /* ++ * Map I/O regions ++ */ ++ ++ host->mmc_base = ioremap(mmc_res->start, resource_size(mmc_res)); ++ if (!host->mmc_base) { ++ ret = -ENOMEM; ++ goto fail3; ++ } ++ ++ gpio_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); ++ if (!gpio_res) { ++ ret = -ENXIO; ++ dev_dbg(&pdev->dev, "couldn't allocate gpio resource\n"); ++ goto fail4; ++ } ++ ++ /* ++ * Map I/O regions ++ */ ++ ++ host->gpio_base = ioremap(gpio_res->start, resource_size(gpio_res)); ++ if (!host->gpio_base) { ++ ret = -ENOMEM; ++ goto fail4; ++ } ++ ++#ifdef USE_DMA ++ host->dma_base = __io_address(dma_res->start); ++ ++ if (!host->dma_base) { ++ ret = -ENOMEM; ++ goto fail5; ++ } ++ ++ // USE DMA5 channel ++ host->dma_base = (void __iomem *)((char *) host->dma_base + (SDHOST_DMA_CHANNEL * 0x100)); ++ ++ dev_dbg(&pdev->dev, "%s: using dma channel %d for sdhost\n", __func__, SDHOST_DMA_CHANNEL); ++ ++ /* ++ * Grab interrupts. ++ */ ++#ifdef USE_DMA_IRQ ++ dat_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!dat_res) { ++ ret = -ENXIO; ++ dev_dbg(&pdev->dev, "couldn't allocate irq for dma\n"); ++ goto fail5; ++ } ++ ++ ret = request_irq(dat_res->start, bcm2708_mci_data_irq, 0, DRIVER_NAME " (dat)", host); ++ if (ret) { ++ goto fail5; ++ } ++ dev_dbg(&pdev->dev, "%s: using dma interrupt number %d for sdhost\n", __func__, dat_res->start); ++ ++#endif ++#endif ++ ++ host->present = bcm2708_mci_get_cd(host->mmc); ++ ++ sddet_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1); ++ if (!sddet_res) { ++ ret = -ENXIO; ++ dev_dbg(&pdev->dev, "couldn't allocate irq for sd detect\n"); ++ goto fail6; ++ } ++ ++ ret = request_irq(sddet_res->start, bcm2708_mci_sddet_irq, 0, DRIVER_NAME " (cmd)", host); ++ if (ret) { ++ goto fail6; ++ } ++ ++ host->is_acmd = 0; ++ ++ mmc->ops = &bcm2708_mci_ops; ++ mmc->f_min = 200000; ++ mmc->f_max = 52000000; ++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; ++ ++ /* ++ * We can do SGIO ++ */ ++ mmc->max_segs = NR_SG; ++ ++ /* ++ * Since we only have a 16-bit data length register, we must ++ * ensure that we don't exceed 2^16-1 bytes in a single request. ++ */ ++ mmc->max_req_size = 65535; ++ ++ /* ++ * Set the maximum segment size. Since we aren't doing DMA ++ * (yet) we are only limited by the data length register. ++ */ ++ mmc->max_seg_size = mmc->max_req_size; ++ ++ /* ++ * Block size can be up to 2048 bytes, but must be a power of two. ++ */ ++ mmc->max_blk_size = 2048; ++ ++ /* ++ * No limit on the number of blocks transferred. ++ */ ++ mmc->max_blk_count = mmc->max_req_size; ++ ++ /* ++ * We support 4-bit data (at least on the DB) ++ */ ++ ++ mmc->caps |= (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED) ; ++ ++ bcm2708_mci_reset(host); ++ ++ mmc_add_host(mmc); ++ ++ printk(KERN_INFO "%s: BCM2708 SD host at 0x%08llx 0x%08llx\n", ++ mmc_hostname(mmc), ++ (unsigned long long)mmc_res->start, (unsigned long long)dma_res->start); ++ ++ return 0; ++ ++fail6: ++#ifdef USE_DMA_IRQ ++ free_irq(dat_res->start, host); ++#endif ++fail5: ++ iounmap(host->gpio_base); ++fail4: ++ iounmap(host->mmc_base); ++fail3: ++ release_mem_region(mmc_res->start, mmc_res->end - mmc_res->start + 1); ++fail2: ++ dma_free_writecombine(&pdev->dev, SZ_4K, host->cb_base, host->cb_handle); ++fail1: ++ mmc_free_host(mmc); ++fail0: ++ dev_err(&pdev->dev, "probe failed, err %d\n", ret); ++ return ret; ++} ++ ++static int __devexit bcm2708_mci_remove(struct platform_device *pdev) ++{ ++ struct mmc_host *mmc = platform_get_drvdata(pdev); ++ ++ if (mmc) { ++ struct bcm2708_mci_host *host = mmc_priv(mmc); ++ struct resource *res; ++ struct resource *res2; ++ ++ mmc_remove_host(mmc); ++#ifdef USE_DMA ++#ifdef USE_DMA_IRQ ++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ free_irq(res->start, host); ++#endif ++#endif ++ ++ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); ++ free_irq(res2->start, host); ++ ++ iounmap(host->mmc_base); ++ iounmap(host->gpio_base); ++ iounmap(host->dma_base); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ release_mem_region(res->start, resource_size(res)); ++#ifdef USE_DMA ++ dma_free_writecombine(&pdev->dev, SZ_4K, host->cb_base, host->cb_handle); ++#endif ++ ++ mmc_free_host(mmc); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++ } else ++ return -1; ++} ++ ++#ifdef CONFIG_PM ++static int bcm2708_mci_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct mmc_host *mmc = platform_get_drvdata(dev); ++ int ret = 0; ++ ++ if (mmc) { ++ ret = mmc_suspend_host(mmc); ++ } ++ ++ return ret; ++} ++ ++static int bcm2708_mci_resume(struct platform_device *dev) ++{ ++ struct mmc_host *mmc = platform_get_drvdata(dev); ++ int ret = 0; ++ ++ if (mmc) { ++ ret = mmc_resume_host(mmc); ++ } ++ ++ return ret; ++} ++#else ++#define bcm2708_mci_suspend NULL ++#define bcm2708_mci_resume NULL ++#endif ++ ++static struct platform_driver bcm2708_mci_driver = { ++ .probe = bcm2708_mci_probe, ++ .remove = bcm2708_mci_remove, ++ .suspend = bcm2708_mci_suspend, ++ .resume = bcm2708_mci_resume, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init bcm2708_mci_init(void) ++{ ++ return platform_driver_register(&bcm2708_mci_driver); ++} ++ ++static void __exit bcm2708_mci_exit(void) ++{ ++ platform_driver_unregister(&bcm2708_mci_driver); ++} ++ ++module_init(bcm2708_mci_init); ++module_exit(bcm2708_mci_exit); ++ ++MODULE_DESCRIPTION("BCM2708 Multimedia Card Interface driver"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:bcm2708_mci"); +diff -urN upstream-3.2.21/drivers/mmc/host/bcm2708_mci.h bootc-3.2.21/drivers/mmc/host/bcm2708_mci.h +--- upstream-3.2.21/drivers/mmc/host/bcm2708_mci.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/mmc/host/bcm2708_mci.h 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,101 @@ ++/* ++ * linux/drivers/mmc/host/bcm2708_mci.c - Broadcom BCM2708 MCI driver ++ * ++ * Copyright (C) 2010 Broadcom, All Rights Reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++struct clk; ++ ++#define BCM2708_MCI_COMMAND 0x00 ++ ++#define BCM2708_MCI_READ (1 << 6) ++#define BCM2708_MCI_WRITE (1 << 7) ++#define BCM2708_MCI_LONGRESP (1 << 9) ++#define BCM2708_MCI_NORESP (1 << 10) ++#define BCM2708_MCI_BUSY (1 << 11) ++#define BCM2708_MCI_FAIL_FLAG (1 << 14) ++#define BCM2708_MCI_ENABLE (1 << 15) ++ ++#define BCM2708_MCI_ARGUMENT 0x04 ++ ++#define BCM2708_MCI_TIMEOUT 0x08 ++#define BCM2708_MCI_CLKDIV 0x0c ++ ++ ++#define BCM2708_MCI_RESPONSE0 0x10 ++#define BCM2708_MCI_RESPONSE1 0x14 ++#define BCM2708_MCI_RESPONSE2 0x18 ++#define BCM2708_MCI_RESPONSE3 0x1c ++ ++#define BCM2708_MCI_STATUS 0x20 ++ ++#define BCM2708_MCI_VDD 0x30 ++#define BCM2708_MCI_VDD_ENABLE (1 << 0) ++ ++#define BCM2708_MCI_EDM 0x34 ++ ++#define BCM2708_MCI_HOSTCONFIG 0x38 ++ ++#define BCM2708_MCI_HOSTCONFIG_WIDE_INT_BUS 0x2 ++#define BCM2708_MCI_HOSTCONFIG_WIDEEXT_4BIT 0x4 ++#define BCM2708_MCI_HOSTCONFIG_SLOW_CARD 0x8 ++#define BCM2708_MCI_HOSTCONFIG_BLOCK_IRPT_EN (1<<8) ++#define BCM2708_MCI_HOSTCONFIG_BUSY_IRPT_EN (1<<10) ++#define BCM2708_MCI_HOSTCONFIG_WIDEEXT_CLR 0xFFFFFFFB ++ ++ ++#define BCM2708_MCI_DATAFLAG (1 << 0) ++#define BCM2708_MCI_CMDTIMEOUT (1 << 6) ++#define BCM2708_MCI_HSTS_BLOCK (1 << 9) /**< block flag in status reg */ ++#define BCM2708_MCI_HSTS_BUSY (1 << 10) /**< Busy flag in status reg */ ++ ++#define BCM2708_MCI_HBCT 0x3c ++#define BCM2708_MCI_DATA 0x40 ++#define BCM2708_MCI_HBLC 0x50 ++ ++#define NR_SG 16 ++ ++typedef struct bulk_data_struct ++{ ++ unsigned long info; ++ unsigned long src; ++ unsigned long dst; ++ unsigned long length; ++ unsigned long stride; ++ unsigned long next; ++ unsigned long pad[2]; ++} BCM2708_DMA_CB_T; ++ ++struct bcm2708_mci_host { ++ struct platform_device *dev; ++ ++ void __iomem *mmc_base; ++ void __iomem *dma_base; ++ void __iomem *gpio_base; ++ ++ BCM2708_DMA_CB_T *cb_base; ++ dma_addr_t cb_handle; ++ ++ struct mmc_host *mmc; ++ ++ struct semaphore sem; ++ ++ int is_acmd; ++ int present; ++}; ++ ++static inline char *bcm2708_mci_kmap_atomic(struct scatterlist *sg, unsigned long *flags) ++{ ++// local_irq_save(*flags); ++ return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; ++} ++ ++static inline void bcm2708_mci_kunmap_atomic(void *buffer, unsigned long *flags) ++{ ++ kunmap_atomic(buffer, KM_BIO_SRC_IRQ); ++// local_irq_restore(*flags); ++} +diff -urN upstream-3.2.21/drivers/mmc/host/Kconfig bootc-3.2.21/drivers/mmc/host/Kconfig +--- upstream-3.2.21/drivers/mmc/host/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/mmc/host/Kconfig 2012-06-23 23:52:03.000000000 +0000 +@@ -229,6 +229,27 @@ + + YMMV. + ++config MMC_SDHCI_BCM2708 ++ tristate "SDHCI support on BCM2708" ++ depends on MMC_SDHCI && MACH_BCM2708 ++ select MMC_SDHCI_IO_ACCESSORS ++ help ++ This selects the Secure Digital Host Controller Interface (SDHCI) ++ often referrered to as the eMMC block. ++ ++ If you have a controller with this interface, say Y or M here. ++ ++ If unsure, say N. ++ ++config MMC_SDHCI_BCM2708_DMA ++ bool "DMA support on BCM2708 Arasan controller" ++ depends on MMC_SDHCI_BCM2708 && EXPERIMENTAL ++ help ++ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708 ++ based chips. ++ ++ If unsure, say N. ++ + config MMC_OMAP + tristate "TI OMAP Multimedia Card Interface support" + depends on ARCH_OMAP +@@ -296,6 +317,14 @@ + If unsure, say N. + + endchoice ++config MMC_BCM2708 ++ tristate "BCM2708 Multimedia Card Interface support" ++ help ++ This selects the BCM2708 Multimedia Card Interface driver. If ++ you have a BCM2708 platform with a Multimedia Card ++ slot, say Y or M here. ++ ++ If unsure, say N. + + config MMC_ATMELMCI_DMA + bool "Atmel MCI DMA support" +diff -urN upstream-3.2.21/drivers/mmc/host/Makefile bootc-3.2.21/drivers/mmc/host/Makefile +--- upstream-3.2.21/drivers/mmc/host/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/mmc/host/Makefile 2012-06-23 23:52:03.000000000 +0000 +@@ -13,6 +13,7 @@ + obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o + obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o + obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o ++obj-$(CONFIG_MMC_SDHCI_BCM2708) += sdhci-bcm2708.o + obj-$(CONFIG_MMC_WBSD) += wbsd.o + obj-$(CONFIG_MMC_AU1X) += au1xmmc.o + obj-$(CONFIG_MMC_OMAP) += omap.o +@@ -36,6 +37,7 @@ + obj-$(CONFIG_MMC_SDHI) += sh_mobile_sdhi.o + obj-$(CONFIG_MMC_CB710) += cb710-mmc.o + obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o ++obj-$(CONFIG_MMC_BCM2708) += bcm2708_mci.o + obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o + obj-$(CONFIG_MMC_DW) += dw_mmc.o + obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o +diff -urN upstream-3.2.21/drivers/mmc/host/sdhci-bcm2708.c bootc-3.2.21/drivers/mmc/host/sdhci-bcm2708.c +--- upstream-3.2.21/drivers/mmc/host/sdhci-bcm2708.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/mmc/host/sdhci-bcm2708.c 2012-06-23 23:52:03.000000000 +0000 +@@ -0,0 +1,1477 @@ ++/* ++ * sdhci-bcm2708.c Support for SDHCI device on BCM2708 ++ * Copyright (c) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++/* Supports: ++ * SDHCI platform device - Arasan SD controller in BCM2708 ++ * ++ * Inspired by sdhci-pci.c, by Pierre Ossman ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "sdhci.h" ++ ++/*****************************************************************************\ ++ * * ++ * Configuration * ++ * * ++\*****************************************************************************/ ++ ++#define DRIVER_NAME "bcm2708_sdhci" ++ ++/* for the time being insist on DMA mode - PIO seems not to work */ ++#ifndef CONFIG_MMC_SDHCI_BCM2708_DMA ++#warning Non-DMA (PIO) version of this driver currently unavailable ++#endif ++#undef CONFIG_MMC_SDHCI_BCM2708_DMA ++#define CONFIG_MMC_SDHCI_BCM2708_DMA y ++ ++#define USE_SYNC_AFTER_DMA ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++/* #define CHECK_DMA_USE */ ++#endif ++//#define LOG_REGISTERS ++ ++#define USE_SCHED_TIME ++#define USE_SPACED_WRITES_2CLK 1 /* space consecutive register writes */ ++#define USE_SOFTWARE_TIMEOUTS 1 /* not hardware timeouts */ ++#define SOFTWARE_ERASE_TIMEOUT_SEC 30 ++ ++#define SDHCI_BCM_DMA_CHAN 4 /* this default is normally overriden */ ++#define SDHCI_BCM_DMA_WAITS 0 /* delays slowing DMA transfers: 0-31 */ ++/* We are worried that SD card DMA use may be blocking the AXI bus for others */ ++ ++/*! TODO: obtain these from the physical address */ ++#define DMA_SDHCI_BASE 0x7e300000 /* EMMC register block on Videocore */ ++#define DMA_SDHCI_BUFFER (DMA_SDHCI_BASE + SDHCI_BUFFER) ++ ++#define BCM2708_SDHCI_SLEEP_TIMEOUT 1000 /* msecs */ ++ ++/* Mhz clock that the EMMC core is running at. Should match the platform clockman settings */ ++#define BCM2708_EMMC_CLOCK_FREQ 50000000 ++ ++#define POWER_OFF 0 ++#define POWER_LAZY_OFF 1 ++#define POWER_ON 2 ++ ++ ++/*****************************************************************************\ ++ * * ++ * Debug * ++ * * ++\*****************************************************************************/ ++ ++ ++ ++#define DBG(f, x...) \ ++ pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x) ++// printk(KERN_INFO DRIVER_NAME " [%s()]: " f, __func__,## x)//GRAYG ++ ++ ++/*****************************************************************************\ ++ * * ++ * High Precision Time * ++ * * ++\*****************************************************************************/ ++ ++#ifdef USE_SCHED_TIME ++ ++#include ++ ++typedef unsigned long hptime_t; ++ ++#define FMT_HPT "lu" ++ ++static inline hptime_t hptime(void) ++{ ++ return frc_clock_ticks32(); ++} ++ ++#define HPTIME_CLK_NS 1000ul ++ ++#else ++ ++typedef unsigned long hptime_t; ++ ++#define FMT_HPT "lu" ++ ++static inline hptime_t hptime(void) ++{ ++ return jiffies; ++} ++ ++#define HPTIME_CLK_NS (1000000000ul/HZ) ++ ++#endif ++ ++static inline unsigned long int since_ns(hptime_t t) ++{ ++ return (unsigned long)((hptime() - t) * HPTIME_CLK_NS); ++} ++ ++static bool allow_highspeed = 1; ++static int emmc_clock_freq = BCM2708_EMMC_CLOCK_FREQ; ++ ++#if 0 ++static void hptime_test(void) ++{ ++ hptime_t now; ++ hptime_t later; ++ ++ now = hptime(); ++ msleep(10); ++ later = hptime(); ++ ++ printk(KERN_INFO DRIVER_NAME": 10ms = %"FMT_HPT" clks " ++ "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n", ++ later-now, now, later, ++ (unsigned long)(HPTIME_CLK_NS * (later - now))); ++ ++ now = hptime(); ++ msleep(1000); ++ later = hptime(); ++ ++ printk(KERN_INFO DRIVER_NAME": 1s = %"FMT_HPT" clks " ++ "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n", ++ later-now, now, later, ++ (unsigned long)(HPTIME_CLK_NS * (later - now))); ++} ++#endif ++ ++/*****************************************************************************\ ++ * * ++ * SDHCI core callbacks * ++ * * ++\*****************************************************************************/ ++ ++ ++#ifdef CHECK_DMA_USE ++/*#define CHECK_DMA_REG_USE*/ ++#endif ++ ++#ifdef CHECK_DMA_REG_USE ++/* we don't expect anything to be using these registers during a ++ DMA (except the IRQ status) - so check */ ++static void check_dma_reg_use(struct sdhci_host *host, int reg); ++#else ++#define check_dma_reg_use(host, reg) ++#endif ++ ++ ++static inline u32 sdhci_bcm2708_raw_readl(struct sdhci_host *host, int reg) ++{ ++ return readl(host->ioaddr + reg); ++} ++ ++u32 sdhci_bcm2708_readl(struct sdhci_host *host, int reg) ++{ ++ u32 l = sdhci_bcm2708_raw_readl(host, reg); ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: readl from 0x%02x, value 0x%08x\n", ++ mmc_hostname(host->mmc), reg, l); ++#endif ++ check_dma_reg_use(host, reg); ++ ++ return l; ++} ++ ++u16 sdhci_bcm2708_readw(struct sdhci_host *host, int reg) ++{ ++ u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3); ++ u32 w = l >> (reg << 3 & 0x18) & 0xffff; ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: readw from 0x%02x, value 0x%04x\n", ++ mmc_hostname(host->mmc), reg, w); ++#endif ++ check_dma_reg_use(host, reg); ++ ++ return (u16)w; ++} ++ ++u8 sdhci_bcm2708_readb(struct sdhci_host *host, int reg) ++{ ++ u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3); ++ u32 b = l >> (reg << 3 & 0x18) & 0xff; ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: readb from 0x%02x, value 0x%02x\n", ++ mmc_hostname(host->mmc), reg, b); ++#endif ++ check_dma_reg_use(host, reg); ++ ++ return (u8)b; ++} ++ ++ ++static void sdhci_bcm2708_raw_writel(struct sdhci_host *host, u32 val, int reg) ++{ ++#if USE_SPACED_WRITES_2CLK ++ /* The Arasan has a bugette whereby it may lose the content of ++ * successive writes to registers that are within two SD-card clock ++ * cycles of each other (a clock domain crossing problem). ++ * It seems, however, that the data register does not have this problem. ++ * (Which is just as well - otherwise we'd have to nobble the DMA engine ++ * too) ++ */ ++ if (reg != SDHCI_BUFFER && host->clock != 0) { ++ /* host->clock is the clock freq in Hz */ ++ static hptime_t last_write_hpt; ++ hptime_t now = hptime(); ++ unsigned int ns_2clk = 2000000000/host->clock; ++ ++ if (now == last_write_hpt || now == last_write_hpt+1) { ++ /* we can't guarantee any significant time has ++ * passed - we'll have to wait anyway ! */ ++ ndelay(ns_2clk); ++ } else ++ { ++ /* we must have waited at least this many ns: */ ++ unsigned int ns_wait = HPTIME_CLK_NS * ++ (last_write_hpt - now - 1); ++ if (ns_wait < ns_2clk) ++ ndelay(ns_2clk - ns_wait); ++ } ++ last_write_hpt = now; ++ } ++ writel(val, host->ioaddr + reg); ++#else ++ void __iomem * regaddr = host->ioaddr + reg; ++ ++ writel(val, regaddr); ++ ++ if (reg != SDHCI_BUFFER && reg != SDHCI_INT_STATUS && host->clock != 0) ++ { ++ int timeout = 100000; ++ while (val != readl(regaddr) && --timeout > 0) ++ continue; ++ ++ if (timeout <= 0) ++ printk(KERN_ERR "%s: writing 0x%X to reg 0x%X " ++ "always gives 0x%X\n", ++ mmc_hostname(host->mmc), ++ val, reg, readl(regaddr)); ++ BUG_ON(timeout <= 0); ++ } ++#endif ++} ++ ++ ++void sdhci_bcm2708_writel(struct sdhci_host *host, u32 val, int reg) ++{ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: writel to 0x%02x, value 0x%08x\n", ++ mmc_hostname(host->mmc), reg, val); ++#endif ++ check_dma_reg_use(host, reg); ++ ++ sdhci_bcm2708_raw_writel(host, val, reg); ++} ++ ++void sdhci_bcm2708_writew(struct sdhci_host *host, u16 val, int reg) ++{ ++ static u32 shadow = 0; ++ ++ u32 p = reg == SDHCI_COMMAND ? shadow : ++ sdhci_bcm2708_raw_readl(host, reg & ~3); ++ u32 s = reg << 3 & 0x18; ++ u32 l = val << s; ++ u32 m = 0xffff << s; ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: writew to 0x%02x, value 0x%04x\n", ++ mmc_hostname(host->mmc), reg, val); ++#endif ++ ++ if (reg == SDHCI_TRANSFER_MODE) ++ shadow = (p & ~m) | l; ++ else { ++ check_dma_reg_use(host, reg); ++ sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3); ++ } ++} ++ ++void sdhci_bcm2708_writeb(struct sdhci_host *host, u8 val, int reg) ++{ ++ u32 p = sdhci_bcm2708_raw_readl(host, reg & ~3); ++ u32 s = reg << 3 & 0x18; ++ u32 l = val << s; ++ u32 m = 0xff << s; ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: writeb to 0x%02x, value 0x%02x\n", ++ mmc_hostname(host->mmc), reg, val); ++#endif ++ ++ check_dma_reg_use(host, reg); ++ sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3); ++} ++ ++static unsigned int sdhci_bcm2708_get_max_clock(struct sdhci_host *host) ++{ ++ return emmc_clock_freq; ++} ++ ++/*****************************************************************************\ ++ * * ++ * DMA Operation * ++ * * ++\*****************************************************************************/ ++ ++struct sdhci_bcm2708_priv { ++ int dma_chan; ++ int dma_irq; ++ void __iomem *dma_chan_base; ++ struct bcm2708_dma_cb *cb_base; /* DMA control blocks */ ++ dma_addr_t cb_handle; ++ /* tracking scatter gather progress */ ++ unsigned sg_ix; /* scatter gather list index */ ++ unsigned sg_done; /* bytes in current sg_ix done */ ++ /* power management */ ++ BCM_POWER_HANDLE_T power_handle; ++ unsigned char power_state; /* enable/disable power state */ ++ unsigned char power_mode; /* last set power mode */ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ unsigned char dma_wanted; /* DMA transfer requested */ ++ unsigned char dma_waits; /* wait states in DMAs */ ++#ifdef CHECK_DMA_USE ++ unsigned char dmas_pending; /* no of unfinished DMAs */ ++ hptime_t when_started; ++ hptime_t when_reset; ++ hptime_t when_stopped; ++#endif ++#endif ++ /* signalling the end of a transfer */ ++ void (*complete)(struct sdhci_host *); ++}; ++ ++#define SDHCI_HOST_PRIV(host) \ ++ (struct sdhci_bcm2708_priv *)((struct sdhci_host *)(host)+1) ++ ++ ++ ++#ifdef CHECK_DMA_REG_USE ++static void check_dma_reg_use(struct sdhci_host *host, int reg) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ if (host_priv->dma_wanted && reg != SDHCI_INT_STATUS) { ++ printk(KERN_INFO"%s: accessing register 0x%x during DMA\n", ++ mmc_hostname(host->mmc), reg); ++ } ++} ++#endif ++ ++ ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ ++static void sdhci_clear_set_irqgen(struct sdhci_host *host, u32 clear, u32 set) ++{ ++ u32 ier; ++ ++ ier = sdhci_bcm2708_raw_readl(host, SDHCI_SIGNAL_ENABLE); ++ ier &= ~clear; ++ ier |= set; ++ /* change which requests generate IRQs - makes no difference to ++ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */ ++ sdhci_bcm2708_raw_writel(host, ier, SDHCI_SIGNAL_ENABLE); ++} ++ ++static void sdhci_signal_irqs(struct sdhci_host *host, u32 irqs) ++{ ++ sdhci_clear_set_irqgen(host, 0, irqs); ++} ++ ++static void sdhci_unsignal_irqs(struct sdhci_host *host, u32 irqs) ++{ ++ sdhci_clear_set_irqgen(host, irqs, 0); ++} ++ ++ ++ ++static void schci_bcm2708_cb_read(struct sdhci_bcm2708_priv *host, ++ int ix, ++ dma_addr_t dma_addr, unsigned len, ++ int /*bool*/ is_last) ++{ ++ struct bcm2708_dma_cb *cb = &host->cb_base[ix]; ++ unsigned char dmawaits = host->dma_waits; ++ ++ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) | ++ BCM2708_DMA_WAITS(dmawaits) | ++ BCM2708_DMA_S_DREQ | ++ BCM2708_DMA_D_WIDTH | ++ BCM2708_DMA_D_INC; ++ cb->src = DMA_SDHCI_BUFFER; /* DATA register DMA address */ ++ cb->dst = dma_addr; ++ cb->length = len; ++ cb->stride = 0; ++ ++ if (is_last) { ++ cb->info |= BCM2708_DMA_INT_EN | ++ BCM2708_DMA_WAIT_RESP; ++ cb->next = 0; ++ } else ++ cb->next = host->cb_handle + ++ (ix+1)*sizeof(struct bcm2708_dma_cb); ++ ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++} ++ ++static void schci_bcm2708_cb_write(struct sdhci_bcm2708_priv *host, ++ int ix, ++ dma_addr_t dma_addr, unsigned len, ++ int /*bool*/ is_last) ++{ ++ struct bcm2708_dma_cb *cb = &host->cb_base[ix]; ++ unsigned char dmawaits = host->dma_waits; ++ ++ /* We can make arbitrarily large writes as long as we specify DREQ to ++ pace the delivery of bytes to the Arasan hardware */ ++ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) | ++ BCM2708_DMA_WAITS(dmawaits) | ++ BCM2708_DMA_D_DREQ | ++ BCM2708_DMA_S_WIDTH | ++ BCM2708_DMA_S_INC; ++ cb->src = dma_addr; ++ cb->dst = DMA_SDHCI_BUFFER; /* DATA register DMA address */ ++ cb->length = len; ++ cb->stride = 0; ++ ++ if (is_last) { ++ cb->info |= BCM2708_DMA_INT_EN | ++ BCM2708_DMA_WAIT_RESP; ++ cb->next = 0; ++ } else ++ cb->next = host->cb_handle + ++ (ix+1)*sizeof(struct bcm2708_dma_cb); ++ ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++} ++ ++ ++static void schci_bcm2708_dma_go(struct sdhci_host *host) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ void __iomem *dma_chan_base = host_priv->dma_chan_base; ++ ++ BUG_ON(host_priv->dma_wanted); ++#ifdef CHECK_DMA_USE ++ if (host_priv->dma_wanted) ++ printk(KERN_ERR "%s: DMA already in progress - " ++ "now %"FMT_HPT", last started %lu " ++ "reset %lu stopped %lu\n", ++ mmc_hostname(host->mmc), ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ else if (host_priv->dmas_pending > 0) ++ printk(KERN_INFO "%s: note - new DMA when %d reset DMAs " ++ "already in progress - " ++ "now %"FMT_HPT", started %lu reset %lu stopped %lu\n", ++ mmc_hostname(host->mmc), ++ host_priv->dmas_pending, ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ host_priv->dmas_pending += 1; ++ host_priv->when_started = hptime(); ++#endif ++ host_priv->dma_wanted = 1; ++ DBG("PDMA go - base %p handle %08X\n", dma_chan_base, ++ host_priv->cb_handle); ++ bcm_dma_start(dma_chan_base, host_priv->cb_handle); ++} ++ ++ ++static void ++sdhci_platdma_read(struct sdhci_host *host, dma_addr_t dma_addr, size_t len) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ ++ DBG("PDMA to read %d bytes\n", len); ++ host_priv->sg_done += len; ++ schci_bcm2708_cb_read(host_priv, 0, dma_addr, len, 1/*TRUE*/); ++ schci_bcm2708_dma_go(host); ++} ++ ++ ++static void ++sdhci_platdma_write(struct sdhci_host *host, dma_addr_t dma_addr, size_t len) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ ++ DBG("PDMA to write %d bytes\n", len); ++ //BUG_ON(0 != (len & 0x1ff)); ++ ++ host_priv->sg_done += len; ++ schci_bcm2708_cb_write(host_priv, 0, dma_addr, len, 1/*TRUE*/); ++ schci_bcm2708_dma_go(host); ++} ++ ++/*! space is avaiable to receive into or data is available to write ++ Platform DMA exported function ++*/ ++void ++sdhci_bcm2708_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask, ++ void(*completion_callback)(struct sdhci_host *host)) ++{ ++ struct mmc_data *data = host->data; ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int sg_ix; ++ size_t bytes; ++ dma_addr_t addr; ++ ++ BUG_ON(NULL == data); ++ BUG_ON(0 == data->blksz); ++ ++ host_priv->complete = completion_callback; ++ ++ sg_ix = host_priv->sg_ix; ++ BUG_ON(sg_ix >= data->sg_len); ++ ++ /* we can DMA blocks larger than blksz - it may hang the DMA ++ channel but we are its only user */ ++ bytes = sg_dma_len(&data->sg[sg_ix]) - host_priv->sg_done; ++ addr = sg_dma_address(&data->sg[sg_ix]) + host_priv->sg_done; ++ ++ if (bytes > 0) { ++ /* We're going to poll for read/write available state until ++ we finish this DMA ++ */ ++ ++ if (data->flags & MMC_DATA_READ) { ++ if (*ref_intmask & SDHCI_INT_DATA_AVAIL) { ++ sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ sdhci_platdma_read(host, addr, bytes); ++ } ++ } else { ++ if (*ref_intmask & SDHCI_INT_SPACE_AVAIL) { ++ sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ sdhci_platdma_write(host, addr, bytes); ++ } ++ } ++ } ++ /* else: ++ we have run out of bytes that need transferring (e.g. we may be in ++ the middle of the last DMA transfer), or ++ it is also possible that we've been called when another IRQ is ++ signalled, even though we've turned off signalling of our own IRQ */ ++ ++ *ref_intmask &= ~SDHCI_INT_DATA_END; ++ /* don't let the main sdhci driver act on this .. we'll deal with it ++ when we respond to the DMA - if one is currently in progress */ ++} ++ ++/* is it possible to DMA the given mmc_data structure? ++ Platform DMA exported function ++*/ ++int /*bool*/ ++sdhci_bcm2708_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int ok = bcm_sg_suitable_for_dma(data->sg, data->sg_len); ++ ++ if (!ok) ++ DBG("Reverting to PIO - bad cache alignment\n"); ++ ++ else { ++ host_priv->sg_ix = 0; /* first SG index */ ++ host_priv->sg_done = 0; /* no bytes done */ ++ } ++ ++ return ok; ++} ++ ++#include //GRAYG ++/*! the current SD transacton has been abandonned ++ We need to tidy up if we were in the middle of a DMA ++ Platform DMA exported function ++*/ ++void ++sdhci_bcm2708_platdma_reset(struct sdhci_host *host, struct mmc_data *data) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ unsigned long flags; ++ ++ BUG_ON(NULL == host); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ if (host_priv->dma_wanted) { ++ if (NULL == data) { ++ printk(KERN_ERR "%s: ongoing DMA reset - no data!\n", ++ mmc_hostname(host->mmc)); ++ BUG_ON(NULL == data); ++ } else { ++ struct scatterlist *sg; ++ int sg_len; ++ int sg_todo; ++ int rc; ++ unsigned long cs; ++ ++ sg = data->sg; ++ sg_len = data->sg_len; ++ sg_todo = sg_dma_len(&sg[host_priv->sg_ix]); ++ ++ cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS); ++ ++ if (!(BCM2708_DMA_ACTIVE & cs)) ++ printk(KERN_INFO "%s: missed completion of " ++ "cmd %d DMA (%d/%d [%d]/[%d]) - " ++ "ignoring it\n", ++ mmc_hostname(host->mmc), ++ host->last_cmdop, ++ host_priv->sg_done, sg_todo, ++ host_priv->sg_ix+1, sg_len); ++ else ++ printk(KERN_INFO "%s: resetting ongoing cmd %d" ++ "DMA before %d/%d [%d]/[%d] complete\n", ++ mmc_hostname(host->mmc), ++ host->last_cmdop, ++ host_priv->sg_done, sg_todo, ++ host_priv->sg_ix+1, sg_len); ++#ifdef CHECK_DMA_USE ++ printk(KERN_INFO "%s: now %"FMT_HPT" started %lu " ++ "last reset %lu last stopped %lu\n", ++ mmc_hostname(host->mmc), ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ { unsigned long info, debug; ++ void __iomem *base; ++ unsigned long pend0, pend1, pend2; ++ ++ base = host_priv->dma_chan_base; ++ cs = readl(base + BCM2708_DMA_CS); ++ info = readl(base + BCM2708_DMA_INFO); ++ debug = readl(base + BCM2708_DMA_DEBUG); ++ printk(KERN_INFO "%s: DMA%d CS=%08lX TI=%08lX " ++ "DEBUG=%08lX\n", ++ mmc_hostname(host->mmc), ++ host_priv->dma_chan, ++ cs, info, debug); ++ pend0 = readl(__io_address(ARM_IRQ_PEND0)); ++ pend1 = readl(__io_address(ARM_IRQ_PEND1)); ++ pend2 = readl(__io_address(ARM_IRQ_PEND2)); ++ ++ printk(KERN_INFO "%s: PEND0=%08lX " ++ "PEND1=%08lX PEND2=%08lX\n", ++ mmc_hostname(host->mmc), ++ pend0, pend1, pend2); ++ ++ //gintsts = readl(__io_address(GINTSTS)); ++ //gintmsk = readl(__io_address(GINTMSK)); ++ //printk(KERN_INFO "%s: USB GINTSTS=%08lX" ++ // "GINTMSK=%08lX\n", ++ // mmc_hostname(host->mmc), gintsts, gintmsk); ++ } ++#endif ++ rc = bcm_dma_abort(host_priv->dma_chan_base); ++ BUG_ON(rc != 0); ++ } ++ host_priv->dma_wanted = 0; ++#ifdef CHECK_DMA_USE ++ host_priv->when_reset = hptime(); ++#endif ++ } ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++ ++static void sdhci_bcm2708_dma_complete_irq(struct sdhci_host *host, ++ u32 dma_cs) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ struct mmc_data *data; ++ struct scatterlist *sg; ++ int sg_len; ++ int sg_ix; ++ int sg_todo; ++ unsigned long flags; ++ ++ BUG_ON(NULL == host); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ data = host->data; ++ ++#ifdef CHECK_DMA_USE ++ if (host_priv->dmas_pending <= 0) ++ DBG("on completion no DMA in progress - " ++ "now %"FMT_HPT" started %lu reset %lu stopped %lu\n", ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ else if (host_priv->dmas_pending > 1) ++ DBG("still %d DMA in progress after completion - " ++ "now %"FMT_HPT" started %lu reset %lu stopped %lu\n", ++ host_priv->dmas_pending - 1, ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ BUG_ON(host_priv->dmas_pending <= 0); ++ host_priv->dmas_pending -= 1; ++ host_priv->when_stopped = hptime(); ++#endif ++ host_priv->dma_wanted = 0; ++ ++ if (NULL == data) { ++ DBG("PDMA unused completion - status 0x%X\n", dma_cs); ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ sg = data->sg; ++ sg_len = data->sg_len; ++ sg_todo = sg_dma_len(&sg[host_priv->sg_ix]); ++ ++ DBG("PDMA complete %d/%d [%d]/[%d]..\n", ++ host_priv->sg_done, sg_todo, ++ host_priv->sg_ix+1, sg_len); ++ ++ BUG_ON(host_priv->sg_done > sg_todo); ++ ++ if (host_priv->sg_done >= sg_todo) { ++ host_priv->sg_ix++; ++ host_priv->sg_done = 0; ++ } ++ ++ sg_ix = host_priv->sg_ix; ++ if (sg_ix < sg_len) { ++ u32 irq_mask; ++ /* Set off next DMA if we've got the capacity */ ++ ++ if (data->flags & MMC_DATA_READ) ++ irq_mask = SDHCI_INT_DATA_AVAIL; ++ else ++ irq_mask = SDHCI_INT_SPACE_AVAIL; ++ ++ /* We have to use the interrupt status register on the BCM2708 ++ rather than the SDHCI_PRESENT_STATE register because latency ++ in the glue logic means that the information retrieved from ++ the latter is not always up-to-date w.r.t the DMA engine - ++ it may not indicate that a read or a write is ready yet */ ++ if (sdhci_bcm2708_raw_readl(host, SDHCI_INT_STATUS) & ++ irq_mask) { ++ size_t bytes = sg_dma_len(&sg[sg_ix]) - ++ host_priv->sg_done; ++ dma_addr_t addr = sg_dma_address(&data->sg[sg_ix]) + ++ host_priv->sg_done; ++ ++ /* acknowledge interrupt */ ++ sdhci_bcm2708_raw_writel(host, irq_mask, ++ SDHCI_INT_STATUS); ++ ++ BUG_ON(0 == bytes); ++ ++ if (data->flags & MMC_DATA_READ) ++ sdhci_platdma_read(host, addr, bytes); ++ else ++ sdhci_platdma_write(host, addr, bytes); ++ } else { ++ DBG("PDMA - wait avail\n"); ++ /* may generate an IRQ if already present */ ++ sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ } ++ } else { ++#ifdef USE_SYNC_AFTER_DMA ++ /* On the Arasan controller the stop command (which will be ++ scheduled after this completes) does not seem to work ++ properly if we allow it to be issued when we are ++ transferring data to/from the SD card. ++ We get CRC and DEND errors unless we wait for ++ the SD controller to finish reading/writing to the card. */ ++ u32 state_mask; ++ int timeout=5000; ++ ++ DBG("PDMA over - sync card\n"); ++ if (data->flags & MMC_DATA_READ) ++ state_mask = SDHCI_DOING_READ; ++ else ++ state_mask = SDHCI_DOING_WRITE; ++ ++ while (0 != (sdhci_bcm2708_raw_readl(host, SDHCI_PRESENT_STATE) ++ & state_mask) && --timeout > 0) ++ { ++ udelay(30); ++ continue; ++ } ++ if (timeout <= 0) ++ printk(KERN_ERR"%s: final %s to SD card still " ++ "running\n", ++ mmc_hostname(host->mmc), ++ data->flags & MMC_DATA_READ? "read": "write"); ++#endif ++ if (host_priv->complete) { ++ (*host_priv->complete)(host); ++ DBG("PDMA %s complete\n", ++ data->flags & MMC_DATA_READ?"read":"write"); ++ sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ } ++ } ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static irqreturn_t sdhci_bcm2708_dma_irq(int irq, void *dev_id) ++{ ++ irqreturn_t result = IRQ_NONE; ++ struct sdhci_host *host = dev_id; ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ u32 dma_cs; /* control and status register */ ++ unsigned long flags; ++ ++ BUG_ON(NULL == dev_id); ++ BUG_ON(NULL == host_priv->dma_chan_base); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ dma_cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS); ++ ++ if (dma_cs & BCM2708_DMA_ERR) { ++ unsigned long debug; ++ debug = readl(host_priv->dma_chan_base + ++ BCM2708_DMA_DEBUG); ++ printk(KERN_ERR "%s: DMA error - CS %lX DEBUG %lX\n", ++ mmc_hostname(host->mmc), (unsigned long)dma_cs, ++ (unsigned long)debug); ++ /* reset error */ ++ writel(debug, host_priv->dma_chan_base + ++ BCM2708_DMA_DEBUG); ++ } ++ if (dma_cs & BCM2708_DMA_INT) { ++ /* acknowledge interrupt */ ++ writel(BCM2708_DMA_INT, ++ host_priv->dma_chan_base + BCM2708_DMA_CS); ++ ++ dsb(); /* ARM data synchronization (push) operation */ ++ ++ if (!host_priv->dma_wanted) { ++ /* ignore this interrupt - it was reset */ ++ printk(KERN_INFO "%s: DMA IRQ %X ignored - " ++ "results were reset\n", ++ mmc_hostname(host->mmc), dma_cs); ++#ifdef CHECK_DMA_USE ++ printk(KERN_INFO "%s: now %"FMT_HPT ++ " started %lu reset %lu stopped %lu\n", ++ mmc_hostname(host->mmc), hptime(), ++ since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ host_priv->dmas_pending--; ++#endif ++ } else ++ sdhci_bcm2708_dma_complete_irq(host, dma_cs); ++ ++ result = IRQ_HANDLED; ++ } ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ return result; ++} ++#endif /* CONFIG_MMC_SDHCI_BCM2708_DMA */ ++ ++ ++/***************************************************************************** \ ++ * * ++ * Device Attributes * ++ * * ++\*****************************************************************************/ ++ ++ ++/** ++ * Show the DMA-using status ++ */ ++static ssize_t attr_dma_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++ int use_dma = (host->flags & SDHCI_USE_PLATDMA? 1:0); ++ return sprintf(buf, "%d\n", use_dma); ++ } else ++ return -EINVAL; ++} ++ ++/** ++ * Set the DMA-using status ++ */ ++static ssize_t attr_dma_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ int on = simple_strtol(buf, NULL, 0); ++ if (on) { ++ host->flags |= SDHCI_USE_PLATDMA; ++ printk(KERN_INFO "%s: DMA enabled\n", ++ mmc_hostname(host->mmc)); ++ } else { ++ host->flags &= ~(SDHCI_USE_PLATDMA | SDHCI_REQ_USE_DMA); ++ printk(KERN_INFO "%s: DMA disabled\n", ++ mmc_hostname(host->mmc)); ++ } ++#endif ++ return count; ++ } else ++ return -EINVAL; ++} ++ ++static DEVICE_ATTR(use_dma, S_IRUGO | S_IWUGO, attr_dma_show, attr_dma_store); ++ ++ ++/** ++ * Show the DMA wait states used ++ */ ++static ssize_t attr_dmawait_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int dmawait = host_priv->dma_waits; ++ return sprintf(buf, "%d\n", dmawait); ++ } else ++ return -EINVAL; ++} ++ ++/** ++ * Set the DMA wait state used ++ */ ++static ssize_t attr_dmawait_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int dma_waits = simple_strtol(buf, NULL, 0); ++ if (dma_waits >= 0 && dma_waits < 32) ++ host_priv->dma_waits = dma_waits; ++ else ++ printk(KERN_ERR "%s: illegal dma_waits value - %d", ++ mmc_hostname(host->mmc), dma_waits); ++#endif ++ return count; ++ } else ++ return -EINVAL; ++} ++ ++static DEVICE_ATTR(dma_wait, S_IRUGO | S_IWUGO, ++ attr_dmawait_show, attr_dmawait_store); ++ ++ ++/** ++ * Show the DMA-using status ++ */ ++static ssize_t attr_status_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int power_state = host_priv->power_state; ++ return sprintf(buf, ++ "present: yes\n" ++ "power: %s\n" ++ "clock: %u Hz\n" ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ "dma: %s (%d waits)\n", ++#else ++ "dma: unconfigured\n", ++#endif ++ power_state == POWER_ON? "on": ++ power_state == POWER_OFF? "off": ++ power_state == POWER_LAZY_OFF? "lazy-off": ++ "", ++ host->clock ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ , (host->flags & SDHCI_USE_PLATDMA)? "on": "off" ++ , host_priv->dma_waits ++#endif ++ ); ++ } else ++ return -EINVAL; ++} ++ ++static DEVICE_ATTR(status, S_IRUGO, attr_status_show, NULL); ++ ++/***************************************************************************** \ ++ * * ++ * Power Management * ++ * * ++\*****************************************************************************/ ++ ++ ++#ifdef CONFIG_PM ++static int sdhci_bcm2708_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct sdhci_host *host = (struct sdhci_host *) ++ platform_get_drvdata(dev); ++ int ret = 0; ++ ++ if (host->mmc) { ++ ret = mmc_suspend_host(host->mmc); ++ } ++ ++ return ret; ++} ++ ++static int sdhci_bcm2708_resume(struct platform_device *dev) ++{ ++ struct sdhci_host *host = (struct sdhci_host *) ++ platform_get_drvdata(dev); ++ int ret = 0; ++ ++ if (host->mmc) { ++ ret = mmc_resume_host(host->mmc); ++ } ++ ++ return ret; ++} ++#endif ++ ++ ++/* Click forwards one step towards fully on */ ++static int sdhci_bcm2708_enable(struct sdhci_host *host) ++{ ++ int rc; ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ ++ if (host_priv->power_state == POWER_OFF) { ++ /* warning: may schedule - don't call in irq mode */ ++ rc = bcm_power_request(host_priv->power_handle, ++ BCM_POWER_SDCARD); ++ ++ if (rc == 0) { ++ mmc_power_restore_host(host->mmc); ++ host_priv->power_state = POWER_ON; ++ } else if (rc != -EINTR) ++ printk(KERN_ERR "%s: mmc power up request failed - " ++ "rc %d\n", ++ mmc_hostname(host->mmc), rc); ++ } else { ++ host_priv->power_state = POWER_ON; ++ rc = 0; ++ } ++ ++ return rc; ++} ++ ++/* Click backwards one step towards fully off */ ++static int sdhci_bcm2708_disable(struct sdhci_host *host, int lazy) ++{ ++ int rc; ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ ++ if ((host_priv->power_state == POWER_ON) && lazy) { ++ host_priv->power_state = POWER_LAZY_OFF; ++ return BCM2708_SDHCI_SLEEP_TIMEOUT; ++ } ++ ++ /* warning: may schedule - don't call in irq mode */ ++ rc = bcm_power_request(host_priv->power_handle, BCM_POWER_NONE); ++ ++ if (rc == 0) ++ host_priv->power_state = POWER_OFF; ++ else if (rc != -EINTR) ++ printk(KERN_ERR "%s: mmc power down request failed - rc %d\n", ++ mmc_hostname(host->mmc), rc); ++ ++ return rc; ++} ++ ++static int sdhci_bcm2708_set_plat_power(struct sdhci_host *host, ++ int power_mode) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int rc; ++ ++ do { ++ rc = mmc_host_enable(host->mmc); ++ } while (-EINTR == rc); ++ ++ if (rc == 0) do { ++ if (rc == 0 && power_mode != host_priv->power_mode) ++ { ++ switch (power_mode) ++ { ++ case MMC_POWER_OFF: ++ rc = bcm_power_request(host_priv->power_handle, ++ BCM_POWER_NONE); ++ break; ++ ++ case MMC_POWER_UP: ++ rc = bcm_power_request(host_priv->power_handle, ++ BCM_POWER_SDCARD); ++ /* ++ * We need an extra 10ms delay of 10ms before we ++ * can apply clock after applying power ++ */ ++ if (rc == 0) ++ mdelay(10); ++ break; ++ ++ case MMC_POWER_ON: ++ mdelay(10); ++ /* do_send_init_stream = 1; */ ++ break; ++ } ++ ++ if (rc == 0) ++ host_priv->power_mode = power_mode; ++ } ++ } while (-EINTR == rc); ++ ++ if (rc == 0) do { ++ if (rc == 0) { ++ if (power_mode == MMC_POWER_OFF) ++ rc = mmc_host_disable(host->mmc); ++ else ++ rc = mmc_host_lazy_disable(host->mmc); ++ } ++ ++ } while (-EINTR == rc); ++ ++ return rc; ++} ++ ++/*****************************************************************************\ ++ * * ++ * Device quirk functions. Implemented as local ops because the flags * ++ * field is out of space with newer kernels. This implementation can be * ++ * back ported to older kernels as well. * ++\****************************************************************************/ ++static unsigned int sdhci_bcm2708_quirk_extra_ints(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++static unsigned int sdhci_bcm2708_quirk_spurious_crc(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++static unsigned int sdhci_bcm2708_quirk_voltage_broken(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++static unsigned int sdhci_bcm2708_uhs_broken(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++static unsigned int sdhci_bcm2708_missing_status(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++/***************************************************************************** \ ++ * * ++ * Device ops * ++ * * ++\*****************************************************************************/ ++ ++static struct sdhci_ops sdhci_bcm2708_ops = { ++#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS ++ .read_l = sdhci_bcm2708_readl, ++ .read_w = sdhci_bcm2708_readw, ++ .read_b = sdhci_bcm2708_readb, ++ .write_l = sdhci_bcm2708_writel, ++ .write_w = sdhci_bcm2708_writew, ++ .write_b = sdhci_bcm2708_writeb, ++#else ++#error The BCM2708 SDHCI driver needs CONFIG_MMC_SDHCI_IO_ACCESSORS to be set ++#endif ++ .get_max_clock = sdhci_bcm2708_get_max_clock, ++ ++ .enable = sdhci_bcm2708_enable, ++ .disable = sdhci_bcm2708_disable, ++ .set_plat_power = sdhci_bcm2708_set_plat_power, ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ // Platform DMA operations ++ .pdma_able = sdhci_bcm2708_platdma_dmaable, ++ .pdma_avail = sdhci_bcm2708_platdma_avail, ++ .pdma_reset = sdhci_bcm2708_platdma_reset, ++#endif ++ .extra_ints = sdhci_bcm2708_quirk_extra_ints, ++ .spurious_crc_acmd51 = sdhci_bcm2708_quirk_spurious_crc, ++ .voltage_broken = sdhci_bcm2708_quirk_voltage_broken, ++ .uhs_broken = sdhci_bcm2708_uhs_broken, ++ .missing_status = sdhci_bcm2708_missing_status, ++}; ++ ++/*****************************************************************************\ ++ * * ++ * Device probing/removal * ++ * * ++\*****************************************************************************/ ++ ++static int __devinit sdhci_bcm2708_probe(struct platform_device *pdev) ++{ ++ struct sdhci_host *host; ++ struct resource *iomem; ++ struct sdhci_bcm2708_priv *host_priv; ++ int ret; ++ ++ BUG_ON(pdev == NULL); ++ ++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!iomem) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ if (resource_size(iomem) != 0x100) ++ dev_err(&pdev->dev, "Invalid iomem size. You may " ++ "experience problems.\n"); ++ ++ if (pdev->dev.parent) ++ host = sdhci_alloc_host(pdev->dev.parent, ++ sizeof(struct sdhci_bcm2708_priv)); ++ else ++ host = sdhci_alloc_host(&pdev->dev, ++ sizeof(struct sdhci_bcm2708_priv)); ++ ++ if (IS_ERR(host)) { ++ ret = PTR_ERR(host); ++ goto err; ++ } ++ ++ host->hw_name = "BCM2708_Arasan"; ++ host->ops = &sdhci_bcm2708_ops; ++ host->irq = platform_get_irq(pdev, 0); ++ ++ host->quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | ++ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | ++ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | ++ SDHCI_QUIRK_MISSING_CAPS | ++ SDHCI_QUIRK_NO_HISPD_BIT; ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ host->flags = SDHCI_USE_PLATDMA; ++#endif ++ ++ if (!request_mem_region(iomem->start, resource_size(iomem), ++ mmc_hostname(host->mmc))) { ++ dev_err(&pdev->dev, "cannot request region\n"); ++ ret = -EBUSY; ++ goto err_request; ++ } ++ ++ host->ioaddr = ioremap(iomem->start, resource_size(iomem)); ++ if (!host->ioaddr) { ++ dev_err(&pdev->dev, "failed to remap registers\n"); ++ ret = -ENOMEM; ++ goto err_remap; ++ } ++ ++ host_priv = SDHCI_HOST_PRIV(host); ++ ++ host_priv->power_state = POWER_ON; ++ ret = bcm_power_open(&host_priv->power_handle); ++ if (ret != 0) ++ goto err_power; ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ host_priv->dma_wanted = 0; ++#ifdef CHECK_DMA_USE ++ host_priv->dmas_pending = 0; ++ host_priv->when_started = 0; ++ host_priv->when_reset = 0; ++ host_priv->when_stopped = 0; ++#endif ++ host_priv->sg_ix = 0; ++ host_priv->sg_done = 0; ++ host_priv->complete = NULL; ++ host_priv->dma_waits = SDHCI_BCM_DMA_WAITS; ++ ++ host_priv->cb_base = dma_alloc_writecombine(&pdev->dev, SZ_4K, ++ &host_priv->cb_handle, ++ GFP_KERNEL); ++ if (!host_priv->cb_base) { ++ dev_err(&pdev->dev, "cannot allocate DMA CBs\n"); ++ ret = -ENOMEM; ++ goto err_alloc_cb; ++ } ++ ++ ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST, ++ &host_priv->dma_chan_base, ++ &host_priv->dma_irq); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "couldn't allocate a DMA channel\n"); ++ goto err_add_dma; ++ } ++ host_priv->dma_chan = ret; ++ ++ ret = request_irq(host_priv->dma_irq, sdhci_bcm2708_dma_irq, ++ IRQF_SHARED, DRIVER_NAME " (dma)", host); ++ if (ret) { ++ dev_err(&pdev->dev, "cannot set DMA IRQ\n"); ++ goto err_add_dma_irq; ++ } ++ DBG("DMA CBs %p handle %08X DMA%d %p DMA IRQ %d\n", ++ host_priv->cb_base, (unsigned)host_priv->cb_handle, ++ host_priv->dma_chan, host_priv->dma_chan_base, ++ host_priv->dma_irq); ++ ++ if (allow_highspeed) ++ host->mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; ++#endif ++ ++ ret = sdhci_add_host(host); ++ if (ret) ++ goto err_add_host; ++ ++ platform_set_drvdata(pdev, host); ++ ret = device_create_file(&pdev->dev, &dev_attr_use_dma); ++ ret = device_create_file(&pdev->dev, &dev_attr_dma_wait); ++ ret = device_create_file(&pdev->dev, &dev_attr_status); ++ ++ printk(KERN_INFO "%s: BCM2708 SDHC host at 0x%08llx DMA %d IRQ %d\n", ++ mmc_hostname(host->mmc), (unsigned long long)iomem->start, ++ host_priv->dma_chan, host_priv->dma_irq); ++ ++ return 0; ++ ++err_add_host: ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ free_irq(host_priv->dma_irq, host); ++err_add_dma_irq: ++ bcm_dma_chan_free(host_priv->dma_chan); ++err_add_dma: ++ dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base, ++ host_priv->cb_handle); ++err_alloc_cb: ++#endif ++ bcm_power_close(host_priv->power_handle); ++err_power: ++ iounmap(host->ioaddr); ++err_remap: ++ release_mem_region(iomem->start, resource_size(iomem)); ++err_request: ++ sdhci_free_host(host); ++err: ++ dev_err(&pdev->dev, "probe failed, err %d\n", ret); ++ return ret; ++} ++ ++static int __devexit sdhci_bcm2708_remove(struct platform_device *pdev) ++{ ++ struct sdhci_host *host = platform_get_drvdata(pdev); ++ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int dead; ++ u32 scratch; ++ ++ dead = 0; ++ scratch = sdhci_bcm2708_readl(host, SDHCI_INT_STATUS); ++ if (scratch == (u32)-1) ++ dead = 1; ++ ++ device_remove_file(&pdev->dev, &dev_attr_status); ++ device_remove_file(&pdev->dev, &dev_attr_dma_wait); ++ device_remove_file(&pdev->dev, &dev_attr_use_dma); ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ free_irq(host_priv->dma_irq, host); ++ dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base, ++ host_priv->cb_handle); ++#endif ++ bcm_power_close(host_priv->power_handle); ++ sdhci_remove_host(host, dead); ++ iounmap(host->ioaddr); ++ release_mem_region(iomem->start, resource_size(iomem)); ++ sdhci_free_host(host); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static struct platform_driver sdhci_bcm2708_driver = { ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = sdhci_bcm2708_probe, ++ .remove = __devexit_p(sdhci_bcm2708_remove), ++ ++#ifdef CONFIG_PM ++ .suspend = sdhci_bcm2708_suspend, ++ .resume = sdhci_bcm2708_resume, ++#endif ++ ++}; ++ ++/*****************************************************************************\ ++ * * ++ * Driver init/exit * ++ * * ++\*****************************************************************************/ ++ ++static int __init sdhci_drv_init(void) ++{ ++ return platform_driver_register(&sdhci_bcm2708_driver); ++} ++ ++static void __exit sdhci_drv_exit(void) ++{ ++ platform_driver_unregister(&sdhci_bcm2708_driver); ++} ++ ++module_init(sdhci_drv_init); ++module_exit(sdhci_drv_exit); ++ ++module_param(allow_highspeed, bool, 0444); ++module_param(emmc_clock_freq, int, 0444); ++ ++MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver"); ++MODULE_AUTHOR("Broadcom "); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:"DRIVER_NAME); ++ ++MODULE_PARM_DESC(allow_highspeed, "Allow high speed transfers modes"); ++MODULE_PARM_DESC(emmc_clock_freq, "Specify the speed of emmc clock"); ++ ++ +diff -urN upstream-3.2.21/drivers/mmc/host/sdhci.c bootc-3.2.21/drivers/mmc/host/sdhci.c +--- upstream-3.2.21/drivers/mmc/host/sdhci.c 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/mmc/host/sdhci.c 2012-06-23 23:52:03.000000000 +0000 +@@ -27,6 +27,7 @@ + + #include + #include ++#include + + #include "sdhci.h" + +@@ -296,7 +297,7 @@ + u32 uninitialized_var(scratch); + u8 *buf; + +- DBG("PIO reading\n"); ++ DBG("PIO reading %db\n", host->data->blksz); + + blksize = host->data->blksz; + chunk = 0; +@@ -341,7 +342,7 @@ + u32 scratch; + u8 *buf; + +- DBG("PIO writing\n"); ++ DBG("PIO writing %db\n", host->data->blksz); + + blksize = host->data->blksz; + chunk = 0; +@@ -380,19 +381,28 @@ + local_irq_restore(flags); + } + +-static void sdhci_transfer_pio(struct sdhci_host *host) ++static void sdhci_transfer_pio(struct sdhci_host *host, u32 intstate) + { + u32 mask; ++ u32 state = 0; ++ u32 intmask; ++ int available; + + BUG_ON(!host->data); + + if (host->blocks == 0) + return; + +- if (host->data->flags & MMC_DATA_READ) ++ if (host->data->flags & MMC_DATA_READ) { + mask = SDHCI_DATA_AVAILABLE; +- else ++ intmask = SDHCI_INT_DATA_AVAIL; ++ } else { + mask = SDHCI_SPACE_AVAILABLE; ++ intmask = SDHCI_INT_SPACE_AVAIL; ++ } ++ ++ /* initially we can see whether we can procede using intstate */ ++ available = (intstate & intmask); + + /* + * Some controllers (JMicron JMB38x) mess up the buffer bits +@@ -403,7 +413,7 @@ + (host->data->blocks == 1)) + mask = ~0; + +- while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) { ++ while (available) { + if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY) + udelay(100); + +@@ -415,9 +425,11 @@ + host->blocks--; + if (host->blocks == 0) + break; ++ state = sdhci_readl(host, SDHCI_PRESENT_STATE); ++ available = state & mask; + } + +- DBG("PIO transfer complete.\n"); ++ DBG("PIO transfer complete - %d blocks left.\n", host->blocks); + } + + static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags) +@@ -690,7 +702,9 @@ + u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL; + u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; + +- if (host->flags & SDHCI_REQ_USE_DMA) ++ /* platform DMA will begin on receipt of PIO irqs */ ++ if ((host->flags & SDHCI_REQ_USE_DMA) && ++ !(host->flags & SDHCI_USE_PLATDMA)) + sdhci_clear_set_irqs(host, pio_irqs, dma_irqs); + else + sdhci_clear_set_irqs(host, dma_irqs, pio_irqs); +@@ -722,44 +736,25 @@ + host->data_early = 0; + host->data->bytes_xfered = 0; + +- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) ++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | SDHCI_USE_PLATDMA)) + host->flags |= SDHCI_REQ_USE_DMA; + + /* + * FIXME: This doesn't account for merging when mapping the + * scatterlist. + */ +- if (host->flags & SDHCI_REQ_USE_DMA) { +- int broken, i; +- struct scatterlist *sg; +- +- broken = 0; +- if (host->flags & SDHCI_USE_ADMA) { +- if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) +- broken = 1; +- } else { +- if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) +- broken = 1; +- } +- +- if (unlikely(broken)) { +- for_each_sg(data->sg, sg, data->sg_len, i) { +- if (sg->length & 0x3) { +- DBG("Reverting to PIO because of " +- "transfer size (%d)\n", +- sg->length); +- host->flags &= ~SDHCI_REQ_USE_DMA; +- break; +- } +- } +- } +- } + + /* + * The assumption here being that alignment is the same after + * translation to device address space. + */ +- if (host->flags & SDHCI_REQ_USE_DMA) { ++ if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) == ++ (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) { ++ ++ if (! sdhci_platdma_dmaable(host, data)) ++ host->flags &= ~SDHCI_REQ_USE_DMA; ++ ++ } else if (host->flags & SDHCI_REQ_USE_DMA) { + int broken, i; + struct scatterlist *sg; + +@@ -818,7 +813,8 @@ + */ + WARN_ON(1); + host->flags &= ~SDHCI_REQ_USE_DMA; +- } else { ++ } else ++ if (!(host->flags & SDHCI_USE_PLATDMA)) { + WARN_ON(sg_cnt != 1); + sdhci_writel(host, sg_dma_address(data->sg), + SDHCI_DMA_ADDRESS); +@@ -834,11 +830,13 @@ + if (host->version >= SDHCI_SPEC_200) { + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_DMA_MASK; +- if ((host->flags & SDHCI_REQ_USE_DMA) && +- (host->flags & SDHCI_USE_ADMA)) +- ctrl |= SDHCI_CTRL_ADMA32; +- else +- ctrl |= SDHCI_CTRL_SDMA; ++ if (! (host->flags & SDHCI_USE_PLATDMA)) { ++ if ((host->flags & SDHCI_REQ_USE_DMA) && ++ (host->flags & SDHCI_USE_ADMA)) ++ ctrl |= SDHCI_CTRL_ADMA32; ++ else ++ ctrl |= SDHCI_CTRL_SDMA; ++ } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } + +@@ -890,7 +888,8 @@ + + if (data->flags & MMC_DATA_READ) + mode |= SDHCI_TRNS_READ; +- if (host->flags & SDHCI_REQ_USE_DMA) ++ if ((host->flags & SDHCI_REQ_USE_DMA) && ++ !(host->flags & SDHCI_USE_PLATDMA)) + mode |= SDHCI_TRNS_DMA; + + sdhci_writew(host, mode, SDHCI_TRANSFER_MODE); +@@ -906,13 +905,16 @@ + host->data = NULL; + + if (host->flags & SDHCI_REQ_USE_DMA) { +- if (host->flags & SDHCI_USE_ADMA) +- sdhci_adma_table_post(host, data); +- else { ++ /* we may have to abandon an ongoing platform DMA */ ++ if (host->flags & SDHCI_USE_PLATDMA) ++ sdhci_platdma_reset(host, data); ++ ++ if (host->flags & (SDHCI_USE_PLATDMA | SDHCI_USE_SDMA)) { + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); +- } ++ } else if (host->flags & SDHCI_USE_ADMA) ++ sdhci_adma_table_post(host, data); + } + + /* +@@ -965,6 +967,12 @@ + if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) + mask |= SDHCI_DATA_INHIBIT; + ++ if(host->ops->missing_status && (cmd->opcode == MMC_SEND_STATUS)) { ++ timeout = 5000; // Really obscenely large delay to send the status, due to bug in controller ++ // which might cause the STATUS command to get stuck when a data operation is in flow ++ mask |= SDHCI_DATA_INHIBIT; ++ } ++ + /* We shouldn't wait for data inihibit for stop commands, even + though they might use busy signaling */ + if (host->mrq->data && (cmd == host->mrq->data->stop)) +@@ -982,10 +990,16 @@ + timeout--; + mdelay(1); + } ++ DBG("send cmd %d - wait 0x%X irq 0x%x\n", cmd->opcode, mask, ++ sdhci_readl(host, SDHCI_INT_STATUS)); + + mod_timer(&host->timer, jiffies + 10 * HZ); + + host->cmd = cmd; ++ if (host->last_cmdop == MMC_APP_CMD) ++ host->last_cmdop = -cmd->opcode; ++ else ++ host->last_cmdop = cmd->opcode; + + sdhci_prepare_data(host, cmd); + +@@ -1218,6 +1232,35 @@ + mdelay(10); + } + ++/* Power on or off the circuitary supporting the register set */ ++static int sdhci_set_plat_power(struct sdhci_host *host, int power_mode) ++{ ++ if (host->ops->set_plat_power) ++ return host->ops->set_plat_power(host, power_mode); ++ else ++ return 0; ++} ++ ++/* Click forwards one step towards fully on */ ++static int sdhci_enable(struct mmc_host *mmc) ++{ ++ struct sdhci_host *host; ++ ++ host = mmc_priv(mmc); ++ ++ return host->ops->enable? host->ops->enable(host): 0; ++} ++ ++/* Click backwards one step towards fully off */ ++static int sdhci_disable(struct mmc_host *mmc, int lazy) ++{ ++ struct sdhci_host *host; ++ ++ host = mmc_priv(mmc); ++ ++ return host->ops->disable? host->ops->disable(host, lazy): 0; ++} ++ + /*****************************************************************************\ + * * + * MMC callbacks * +@@ -1298,6 +1341,7 @@ + { + unsigned long flags; + u8 ctrl; ++ int rc; + + spin_lock_irqsave(&host->lock, flags); + +@@ -1356,7 +1400,7 @@ + else + ctrl &= ~SDHCI_CTRL_HISPD; + +- if (host->version >= SDHCI_SPEC_300) { ++ if (host->version >= SDHCI_SPEC_300 && !(host->ops->uhs_broken)) { + u16 clk, ctrl_2; + unsigned int clock; + +@@ -1445,6 +1489,12 @@ + out: + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (ios->power_mode == MMC_POWER_OFF) { ++ do ++ rc = sdhci_set_plat_power(host, ios->power_mode); ++ while (rc == -EINTR); ++ } + } + + static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +@@ -1888,6 +1938,8 @@ + .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, + .execute_tuning = sdhci_execute_tuning, + .enable_preset_value = sdhci_enable_preset_value, ++ .enable = sdhci_enable, ++ .disable = sdhci_disable, + }; + + /*****************************************************************************\ +@@ -2000,7 +2052,7 @@ + + if (host->mrq) { + pr_err("%s: Timeout waiting for hardware " +- "interrupt.\n", mmc_hostname(host->mmc)); ++ "interrupt - cmd%d.\n", mmc_hostname(host->mmc), host->last_cmdop); + sdhci_dumpregs(host); + + if (host->data) { +@@ -2045,10 +2097,13 @@ + BUG_ON(intmask == 0); + + if (!host->cmd) { +- pr_err("%s: Got command interrupt 0x%08x even " +- "though no command operation was in progress.\n", +- mmc_hostname(host->mmc), (unsigned)intmask); +- sdhci_dumpregs(host); ++ if (!(host->ops->extra_ints)) { ++ pr_err("%s: Got command interrupt 0x%08x even " ++ "though no command operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ sdhci_dumpregs(host); ++ } else ++ DBG("cmd irq 0x%08x cmd complete\n", (unsigned)intmask); + return; + } + +@@ -2118,6 +2173,19 @@ + static void sdhci_show_adma_error(struct sdhci_host *host) { } + #endif + ++static void sdhci_data_end(struct sdhci_host *host) ++{ ++ if (host->cmd) { ++ /* ++ * Data managed to finish before the ++ * command completed. Make sure we do ++ * things in the proper order. ++ */ ++ host->data_early = 1; ++ } else ++ sdhci_finish_data(host); ++} ++ + static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) + { + BUG_ON(intmask == 0); +@@ -2144,34 +2212,57 @@ + return; + } + } +- +- pr_err("%s: Got data interrupt 0x%08x even " +- "though no data operation was in progress.\n", +- mmc_hostname(host->mmc), (unsigned)intmask); +- sdhci_dumpregs(host); ++ ++ if (!(host->ops->extra_ints)) { ++ pr_err("%s: Got data interrupt 0x%08x even " ++ "though no data operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ sdhci_dumpregs(host); ++ } else ++ DBG("data irq 0x%08x but no data\n", (unsigned)intmask); + + return; + } + + if (intmask & SDHCI_INT_DATA_TIMEOUT) + host->data->error = -ETIMEDOUT; +- else if (intmask & SDHCI_INT_DATA_END_BIT) +- host->data->error = -EILSEQ; +- else if ((intmask & SDHCI_INT_DATA_CRC) && ++ else if (intmask & SDHCI_INT_DATA_END_BIT) { ++ DBG("end error in cmd %d\n", host->last_cmdop); ++ if (host->ops->spurious_crc_acmd51 && ++ host->last_cmdop == -SD_APP_SEND_SCR) { ++ DBG("ignoring spurious data_end_bit error\n"); ++ intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END; ++ } else ++ host->data->error = -EILSEQ; ++ } else if ((intmask & SDHCI_INT_DATA_CRC) && + SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) +- != MMC_BUS_TEST_R) +- host->data->error = -EILSEQ; +- else if (intmask & SDHCI_INT_ADMA_ERROR) { ++ != MMC_BUS_TEST_R) { ++ DBG("crc error in cmd %d\n", host->last_cmdop); ++ if (host->ops->spurious_crc_acmd51 && ++ host->last_cmdop == -SD_APP_SEND_SCR) { ++ DBG("ignoring spurious data_crc_bit error\n"); ++ intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END; ++ } else { ++ host->data->error = -EILSEQ; ++ } ++ } else if (intmask & SDHCI_INT_ADMA_ERROR) { + pr_err("%s: ADMA error\n", mmc_hostname(host->mmc)); + sdhci_show_adma_error(host); + host->data->error = -EIO; + } + +- if (host->data->error) ++ if (host->data->error) { ++ DBG("finish request early on error %d\n", host->data->error); + sdhci_finish_data(host); +- else { +- if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) +- sdhci_transfer_pio(host); ++ } else { ++ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) { ++ if (host->flags & SDHCI_REQ_USE_DMA) { ++ /* possible only in PLATDMA mode */ ++ sdhci_platdma_avail(host, &intmask, ++ &sdhci_data_end); ++ } else ++ sdhci_transfer_pio(host, intmask); ++ } + + /* + * We currently don't do anything fancy with DMA +@@ -2200,18 +2291,8 @@ + sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS); + } + +- if (intmask & SDHCI_INT_DATA_END) { +- if (host->cmd) { +- /* +- * Data managed to finish before the +- * command completed. Make sure we do +- * things in the proper order. +- */ +- host->data_early = 1; +- } else { +- sdhci_finish_data(host); +- } +- } ++ if (intmask & SDHCI_INT_DATA_END) ++ sdhci_data_end(host); + } + } + +@@ -2266,6 +2347,22 @@ + tasklet_schedule(&host->card_tasklet); + } + ++ if (intmask & SDHCI_INT_ERROR_MASK & ~SDHCI_INT_ERROR) ++ DBG("controller reports error 0x%x -" ++ "%s%s%s%s%s%s%s%s%s%s", ++ intmask, ++ intmask & SDHCI_INT_TIMEOUT? " timeout": "", ++ intmask & SDHCI_INT_CRC ? " crc": "", ++ intmask & SDHCI_INT_END_BIT? " endbit": "", ++ intmask & SDHCI_INT_INDEX? " index": "", ++ intmask & SDHCI_INT_DATA_TIMEOUT? " data_timeout": "", ++ intmask & SDHCI_INT_DATA_CRC? " data_crc": "", ++ intmask & SDHCI_INT_DATA_END_BIT? " data_endbit": "", ++ intmask & SDHCI_INT_BUS_POWER? " buspower": "", ++ intmask & SDHCI_INT_ACMD12ERR? " acmd12": "", ++ intmask & SDHCI_INT_ADMA_ERROR? " adma": "" ++ ); ++ + if (intmask & SDHCI_INT_CMD_MASK) { + sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK, + SDHCI_INT_STATUS); +@@ -2280,7 +2377,13 @@ + + intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK); + +- intmask &= ~SDHCI_INT_ERROR; ++ if (intmask & SDHCI_INT_ERROR_MASK) { ++ /* collect any uncovered errors */ ++ sdhci_writel(host, intmask & SDHCI_INT_ERROR_MASK, ++ SDHCI_INT_STATUS); ++ } ++ ++ intmask &= ~SDHCI_INT_ERROR_MASK; + + if (intmask & SDHCI_INT_BUS_POWER) { + pr_err("%s: Card is consuming too much power!\n", +@@ -2363,7 +2466,8 @@ + return ret; + } + +- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { ++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | ++ SDHCI_USE_PLATDMA)) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } +@@ -2570,14 +2674,16 @@ + host->flags &= ~SDHCI_USE_ADMA; + } + +- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { ++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | ++ SDHCI_USE_PLATDMA)) { + if (host->ops->enable_dma) { + if (host->ops->enable_dma(host)) { + pr_warning("%s: No suitable DMA " + "available. Falling back to PIO.\n", + mmc_hostname(mmc)); + host->flags &= +- ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA); ++ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA | ++ SDHCI_USE_PLATDMA); + } + } + } +@@ -2688,7 +2794,7 @@ + /* Auto-CMD23 stuff only works in ADMA or PIO. */ + if ((host->version >= SDHCI_SPEC_300) && + ((host->flags & SDHCI_USE_ADMA) || +- !(host->flags & SDHCI_USE_SDMA))) { ++ !(host->flags & SDHCI_USE_SDMA) )) { + host->flags |= SDHCI_AUTO_CMD23; + DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); + } else { +@@ -2821,6 +2927,12 @@ + mmc->caps |= MMC_CAP_MAX_CURRENT_200; + } + ++ if(host->ops->voltage_broken) { ++ ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31; ++ // Cannot support UHS modes is we are stuck at 3.3V; ++ mmc->caps &= ~(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50); ++ } ++ + mmc->ocr_avail = ocr_avail; + mmc->ocr_avail_sdio = ocr_avail; + if (host->ocr_avail_sdio) +@@ -2953,6 +3065,7 @@ + + pr_info("%s: SDHCI controller on %s [%s] using %s\n", + mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), ++ (host->flags & SDHCI_USE_PLATDMA) ? "platform's DMA" : + (host->flags & SDHCI_USE_ADMA) ? "ADMA" : + (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO"); + +diff -urN upstream-3.2.21/drivers/mmc/host/sdhci.h bootc-3.2.21/drivers/mmc/host/sdhci.h +--- upstream-3.2.21/drivers/mmc/host/sdhci.h 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/mmc/host/sdhci.h 2012-06-23 23:52:03.000000000 +0000 +@@ -273,6 +273,25 @@ + void (*platform_reset_enter)(struct sdhci_host *host, u8 mask); + void (*platform_reset_exit)(struct sdhci_host *host, u8 mask); + int (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); ++ ++ int (*enable)(struct sdhci_host *mmc); ++ int (*disable)(struct sdhci_host *mmc, int lazy); ++ int (*set_plat_power)(struct sdhci_host *mmc, ++ int power_mode); ++ ++ int (*pdma_able)(struct sdhci_host *host, ++ struct mmc_data *data); ++ void (*pdma_avail)(struct sdhci_host *host, ++ unsigned int *ref_intmask, ++ void(*complete)(struct sdhci_host *)); ++ void (*pdma_reset)(struct sdhci_host *host, ++ struct mmc_data *data); ++ unsigned int (*extra_ints)(struct sdhci_host *host); ++ unsigned int (*spurious_crc_acmd51)(struct sdhci_host *host); ++ unsigned int (*voltage_broken)(struct sdhci_host *host); ++ unsigned int (*uhs_broken)(struct sdhci_host *host); ++ unsigned int (*missing_status)(struct sdhci_host *host); ++ + void (*hw_reset)(struct sdhci_host *host); + }; + +@@ -379,6 +398,29 @@ + extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); + #endif + ++static inline int /*bool*/ ++sdhci_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data) ++{ ++ if (host->ops->pdma_able) ++ return host->ops->pdma_able(host, data); ++ else ++ return 1; ++} ++static inline void ++sdhci_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask, ++ void(*completion_callback)(struct sdhci_host *)) ++{ ++ if (host->ops->pdma_avail) ++ host->ops->pdma_avail(host, ref_intmask, completion_callback); ++} ++ ++static inline void ++sdhci_platdma_reset(struct sdhci_host *host, struct mmc_data *data) ++{ ++ if (host->ops->pdma_reset) ++ host->ops->pdma_reset(host, data); ++} ++ + #ifdef CONFIG_PM_RUNTIME + extern int sdhci_runtime_suspend_host(struct sdhci_host *host); + extern int sdhci_runtime_resume_host(struct sdhci_host *host); +diff -urN upstream-3.2.21/drivers/net/usb/smsc95xx.c bootc-3.2.21/drivers/net/usb/smsc95xx.c +--- upstream-3.2.21/drivers/net/usb/smsc95xx.c 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/net/usb/smsc95xx.c 2012-06-23 23:52:11.000000000 +0000 +@@ -46,6 +46,7 @@ + #define SMSC95XX_INTERNAL_PHY_ID (1) + #define SMSC95XX_TX_OVERHEAD (8) + #define SMSC95XX_TX_OVERHEAD_CSUM (12) ++#define MAC_ADDR_LEN (6) + + struct smsc95xx_priv { + u32 mac_cr; +@@ -63,6 +64,10 @@ + module_param(turbo_mode, bool, 0644); + MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); + ++static char *macaddr = ":"; ++module_param(macaddr, charp, 0); ++MODULE_PARM_DESC(macaddr, "MAC address"); ++ + static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data) + { + u32 *buf = kmalloc(4, GFP_KERNEL); +@@ -600,8 +605,59 @@ + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); + } + ++/* Check the macaddr module parameter for a MAC address */ ++static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac) ++{ ++ int i, j, got_num, num; ++ u8 mtbl[MAC_ADDR_LEN]; ++ ++ if (macaddr[0] == ':') ++ return 0; ++ ++ i = 0; ++ j = 0; ++ num = 0; ++ got_num = 0; ++ while (j < MAC_ADDR_LEN) { ++ if (macaddr[i] && macaddr[i] != ':') { ++ got_num++; ++ if ('0' <= macaddr[i] && macaddr[i] <= '9') ++ num = num * 16 + macaddr[i] - '0'; ++ else if ('A' <= macaddr[i] && macaddr[i] <= 'F') ++ num = num * 16 + 10 + macaddr[i] - 'A'; ++ else if ('a' <= macaddr[i] && macaddr[i] <= 'f') ++ num = num * 16 + 10 + macaddr[i] - 'a'; ++ else ++ break; ++ i++; ++ } else if (got_num == 2) { ++ mtbl[j++] = (u8) num; ++ num = 0; ++ got_num = 0; ++ i++; ++ } else { ++ break; ++ } ++ } ++ ++ if (j == MAC_ADDR_LEN) { ++ netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: " ++ "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2], ++ mtbl[3], mtbl[4], mtbl[5]); ++ for (i = 0; i < MAC_ADDR_LEN; i++) ++ dev_mac[i] = mtbl[i]; ++ return 1; ++ } else { ++ return 0; ++ } ++} ++ + static void smsc95xx_init_mac_address(struct usbnet *dev) + { ++ /* Check module parameters */ ++ if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr)) ++ return; ++ + /* try reading mac address from EEPROM */ + if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, + dev->net->dev_addr) == 0) { +@@ -1016,6 +1072,7 @@ + dev->net->ethtool_ops = &smsc95xx_ethtool_ops; + dev->net->flags |= IFF_MULTICAST; + dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM; ++ dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; + return 0; + } + +diff -urN upstream-3.2.21/drivers/spi/Kconfig bootc-3.2.21/drivers/spi/Kconfig +--- upstream-3.2.21/drivers/spi/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/spi/Kconfig 2012-06-23 23:52:23.000000000 +0000 +@@ -74,6 +74,14 @@ + This selects a driver for the Atmel SPI Controller, present on + many AT32 (AVR32) and AT91 (ARM) chips. + ++config SPI_BCM2708 ++ tristate "BCM2708 SPI controller driver (SPI0)" ++ depends on MACH_BCM2708 ++ help ++ This selects a driver for the Broadcom BCM2708 SPI master (SPI0). This ++ driver is not compatible with the "Universal SPI Master" or the SPI slave ++ device. ++ + config SPI_BFIN + tristate "SPI controller driver for ADI Blackfin5xx" + depends on BLACKFIN +diff -urN upstream-3.2.21/drivers/spi/Makefile bootc-3.2.21/drivers/spi/Makefile +--- upstream-3.2.21/drivers/spi/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/spi/Makefile 2012-06-23 23:52:23.000000000 +0000 +@@ -14,6 +14,7 @@ + obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o + obj-$(CONFIG_SPI_ATH79) += spi-ath79.o + obj-$(CONFIG_SPI_AU1550) += spi-au1550.o ++obj-$(CONFIG_SPI_BCM2708) += spi-bcm2708.o + obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o + obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o + obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o +diff -urN upstream-3.2.21/drivers/spi/spi-bcm2708.c bootc-3.2.21/drivers/spi/spi-bcm2708.c +--- upstream-3.2.21/drivers/spi/spi-bcm2708.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/spi/spi-bcm2708.c 2012-06-23 23:52:23.000000000 +0000 +@@ -0,0 +1,579 @@ ++/* ++ * Driver for Broadcom BCM2708 SPI Controllers ++ * ++ * Copyright (C) 2012 Chris Boot ++ * ++ * This driver is inspired by: ++ * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos ++ * spi-atmel.c, Copyright (C) 2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* SPI register offsets */ ++#define SPI_CS 0x00 ++#define SPI_FIFO 0x04 ++#define SPI_CLK 0x08 ++#define SPI_DLEN 0x0c ++#define SPI_LTOH 0x10 ++#define SPI_DC 0x14 ++ ++/* Bitfields in CS */ ++#define SPI_CS_LEN_LONG 0x02000000 ++#define SPI_CS_DMA_LEN 0x01000000 ++#define SPI_CS_CSPOL2 0x00800000 ++#define SPI_CS_CSPOL1 0x00400000 ++#define SPI_CS_CSPOL0 0x00200000 ++#define SPI_CS_RXF 0x00100000 ++#define SPI_CS_RXR 0x00080000 ++#define SPI_CS_TXD 0x00040000 ++#define SPI_CS_RXD 0x00020000 ++#define SPI_CS_DONE 0x00010000 ++#define SPI_CS_LEN 0x00002000 ++#define SPI_CS_REN 0x00001000 ++#define SPI_CS_ADCS 0x00000800 ++#define SPI_CS_INTR 0x00000400 ++#define SPI_CS_INTD 0x00000200 ++#define SPI_CS_DMAEN 0x00000100 ++#define SPI_CS_TA 0x00000080 ++#define SPI_CS_CSPOL 0x00000040 ++#define SPI_CS_CLEAR_RX 0x00000020 ++#define SPI_CS_CLEAR_TX 0x00000010 ++#define SPI_CS_CPOL 0x00000008 ++#define SPI_CS_CPHA 0x00000004 ++#define SPI_CS_CS_10 0x00000002 ++#define SPI_CS_CS_01 0x00000001 ++ ++#define SPI_TIMEOUT_MS 150 ++ ++#define DRV_NAME "bcm2708_spi" ++ ++struct bcm2708_spi { ++ spinlock_t lock; ++ void __iomem *base; ++ int irq; ++ struct clk *clk; ++ bool stopping; ++ ++ struct list_head queue; ++ struct workqueue_struct *workq; ++ struct work_struct work; ++ struct completion done; ++ ++ const u8 *tx_buf; ++ u8 *rx_buf; ++ int len; ++}; ++ ++struct bcm2708_spi_state { ++ u32 cs; ++ u16 cdiv; ++}; ++ ++/* ++ * This function sets the ALT mode on the SPI pins so that we can use them with ++ * the SPI hardware. ++ * ++ * FIXME: This is a hack. Use pinmux / pinctrl. ++ */ ++static void bcm2708_init_pinmode(void) ++{ ++#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3)) ++#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3)) ++ ++ int pin; ++ u32 *gpio = ioremap(0x20200000, SZ_16K); ++ ++ /* SPI is on GPIO 7..11 */ ++ for (pin = 7; pin <= 11; pin++) { ++ INP_GPIO(pin); /* set mode to GPIO input first */ ++ SET_GPIO_ALT(pin, 0); /* set mode to ALT 0 */ ++ } ++ ++ iounmap(gpio); ++ ++#undef INP_GPIO ++#undef SET_GPIO_ALT ++} ++ ++static inline u32 bcm2708_rd(struct bcm2708_spi *bs, unsigned reg) ++{ ++ return readl(bs->base + reg); ++} ++ ++static inline void bcm2708_wr(struct bcm2708_spi *bs, unsigned reg, u32 val) ++{ ++ writel(val, bs->base + reg); ++} ++ ++static inline void bcm2708_rd_fifo(struct bcm2708_spi *bs, int len) ++{ ++ u8 byte; ++ ++ while (len--) { ++ byte = bcm2708_rd(bs, SPI_FIFO); ++ if (bs->rx_buf) ++ *bs->rx_buf++ = byte; ++ } ++} ++ ++static inline void bcm2708_wr_fifo(struct bcm2708_spi *bs, int len) ++{ ++ u8 byte; ++ ++ if (len > bs->len) ++ len = bs->len; ++ ++ while (len--) { ++ byte = bs->tx_buf ? *bs->tx_buf++ : 0; ++ bcm2708_wr(bs, SPI_FIFO, byte); ++ bs->len--; ++ } ++} ++ ++static irqreturn_t bcm2708_spi_interrupt(int irq, void *dev_id) ++{ ++ struct spi_master *master = dev_id; ++ struct bcm2708_spi *bs = spi_master_get_devdata(master); ++ u32 cs; ++ ++ spin_lock(&bs->lock); ++ ++ cs = bcm2708_rd(bs, SPI_CS); ++ ++ if (cs & SPI_CS_DONE) { ++ if (bs->len) { /* first interrupt in a transfer */ ++ /* fill the TX fifo with up to 16 bytes */ ++ bcm2708_wr_fifo(bs, 16); ++ } else { /* transfer complete */ ++ /* disable interrupts */ ++ cs &= ~(SPI_CS_INTR | SPI_CS_INTD); ++ bcm2708_wr(bs, SPI_CS, cs); ++ ++ /* drain RX FIFO */ ++ while (cs & SPI_CS_RXD) { ++ bcm2708_rd_fifo(bs, 1); ++ cs = bcm2708_rd(bs, SPI_CS); ++ } ++ ++ /* wake up our bh */ ++ complete(&bs->done); ++ } ++ } else if (cs & SPI_CS_RXR) { ++ /* read 12 bytes of data */ ++ bcm2708_rd_fifo(bs, 12); ++ ++ /* write up to 12 bytes */ ++ bcm2708_wr_fifo(bs, 12); ++ } ++ ++ spin_unlock(&bs->lock); ++ ++ return IRQ_HANDLED; ++} ++ ++static int bcm2708_setup_state(struct spi_master *master, ++ struct device *dev, struct bcm2708_spi_state *state, ++ u32 hz, u8 csel, u8 mode, u8 bpw) ++{ ++ struct bcm2708_spi *bs = spi_master_get_devdata(master); ++ int cdiv; ++ unsigned long bus_hz; ++ u32 cs = 0; ++ ++ bus_hz = clk_get_rate(bs->clk); ++ ++ if (hz >= bus_hz) { ++ cdiv = 2; /* bus_hz / 2 is as fast as we can go */ ++ } else if (hz) { ++ cdiv = DIV_ROUND_UP(bus_hz, hz); ++ ++ /* CDIV must be a power of 2, so round up */ ++ cdiv = roundup_pow_of_two(cdiv); ++ ++ if (cdiv > 65536) { ++ dev_dbg(dev, ++ "setup: %d Hz too slow, cdiv %u; min %ld Hz\n", ++ hz, cdiv, bus_hz / 65536); ++ return -EINVAL; ++ } else if (cdiv == 65536) { ++ cdiv = 0; ++ } else if (cdiv == 1) { ++ cdiv = 2; /* 1 gets rounded down to 0; == 65536 */ ++ } ++ } else { ++ cdiv = 0; ++ } ++ ++ switch (bpw) { ++ case 8: ++ break; ++ default: ++ dev_dbg(dev, "setup: invalid bits_per_word %u (must be 8)\n", ++ bpw); ++ return -EINVAL; ++ } ++ ++ if (mode & SPI_CPOL) ++ cs |= SPI_CS_CPOL; ++ if (mode & SPI_CPHA) ++ cs |= SPI_CS_CPHA; ++ ++ if (!(mode & SPI_NO_CS)) { ++ if (mode & SPI_CS_HIGH) { ++ cs |= SPI_CS_CSPOL; ++ cs |= SPI_CS_CSPOL0 << csel; ++ } ++ ++ cs |= csel; ++ } else { ++ cs |= SPI_CS_CS_10 | SPI_CS_CS_01; ++ } ++ ++ if (state) { ++ state->cs = cs; ++ state->cdiv = cdiv; ++ } ++ ++ return 0; ++} ++ ++static int bcm2708_process_transfer(struct bcm2708_spi *bs, ++ struct spi_message *msg, struct spi_transfer *xfer) ++{ ++ struct spi_device *spi = msg->spi; ++ struct bcm2708_spi_state state, *stp; ++ int ret; ++ u32 cs; ++ ++ if (bs->stopping) ++ return -ESHUTDOWN; ++ ++ if (xfer->bits_per_word || xfer->speed_hz) { ++ ret = bcm2708_setup_state(spi->master, &spi->dev, &state, ++ spi->max_speed_hz, spi->chip_select, spi->mode, ++ spi->bits_per_word); ++ if (ret) ++ return ret; ++ ++ stp = &state; ++ } else { ++ stp = spi->controller_state; ++ } ++ ++ INIT_COMPLETION(bs->done); ++ bs->tx_buf = xfer->tx_buf; ++ bs->rx_buf = xfer->rx_buf; ++ bs->len = xfer->len; ++ ++ cs = stp->cs | SPI_CS_INTR | SPI_CS_INTD | SPI_CS_TA; ++ ++ bcm2708_wr(bs, SPI_CLK, stp->cdiv); ++ bcm2708_wr(bs, SPI_CS, cs); ++ ++ ret = wait_for_completion_timeout(&bs->done, ++ msecs_to_jiffies(SPI_TIMEOUT_MS)); ++ if (ret == 0) { ++ dev_err(&spi->dev, "transfer timed out\n"); ++ return -ETIMEDOUT; ++ } ++ ++ if (xfer->delay_usecs) ++ udelay(xfer->delay_usecs); ++ ++ if (list_is_last(&xfer->transfer_list, &msg->transfers) || ++ xfer->cs_change) { ++ /* clear TA and interrupt flags */ ++ bcm2708_wr(bs, SPI_CS, stp->cs); ++ } ++ ++ msg->actual_length += (xfer->len - bs->len); ++ ++ return 0; ++} ++ ++static void bcm2708_work(struct work_struct *work) ++{ ++ struct bcm2708_spi *bs = container_of(work, struct bcm2708_spi, work); ++ unsigned long flags; ++ struct spi_message *msg; ++ struct spi_transfer *xfer; ++ int status = 0; ++ ++ spin_lock_irqsave(&bs->lock, flags); ++ while (!list_empty(&bs->queue)) { ++ msg = list_first_entry(&bs->queue, struct spi_message, queue); ++ list_del_init(&msg->queue); ++ spin_unlock_irqrestore(&bs->lock, flags); ++ ++ list_for_each_entry(xfer, &msg->transfers, transfer_list) { ++ status = bcm2708_process_transfer(bs, msg, xfer); ++ if (status) ++ break; ++ } ++ ++ msg->status = status; ++ msg->complete(msg->context); ++ ++ spin_lock_irqsave(&bs->lock, flags); ++ } ++ spin_unlock_irqrestore(&bs->lock, flags); ++} ++ ++static int bcm2708_spi_setup(struct spi_device *spi) ++{ ++ struct bcm2708_spi *bs = spi_master_get_devdata(spi->master); ++ struct bcm2708_spi_state *state; ++ int ret; ++ ++ if (bs->stopping) ++ return -ESHUTDOWN; ++ ++ if (!(spi->mode & SPI_NO_CS) && ++ (spi->chip_select > spi->master->num_chipselect)) { ++ dev_dbg(&spi->dev, ++ "setup: invalid chipselect %u (%u defined)\n", ++ spi->chip_select, spi->master->num_chipselect); ++ return -EINVAL; ++ } ++ ++ state = spi->controller_state; ++ if (!state) { ++ state = kzalloc(sizeof(*state), GFP_KERNEL); ++ if (!state) ++ return -ENOMEM; ++ ++ spi->controller_state = state; ++ } ++ ++ ret = bcm2708_setup_state(spi->master, &spi->dev, state, ++ spi->max_speed_hz, spi->chip_select, spi->mode, ++ spi->bits_per_word); ++ if (ret < 0) { ++ kfree(state); ++ spi->controller_state = NULL; ++ } ++ ++ dev_dbg(&spi->dev, ++ "setup: cd %d: %d Hz, bpw %u, mode 0x%x -> CS=%08x CDIV=%04x\n", ++ spi->chip_select, spi->max_speed_hz, spi->bits_per_word, ++ spi->mode, state->cs, state->cdiv); ++ ++ return 0; ++} ++ ++static int bcm2708_spi_transfer(struct spi_device *spi, struct spi_message *msg) ++{ ++ struct bcm2708_spi *bs = spi_master_get_devdata(spi->master); ++ struct spi_transfer *xfer; ++ int ret; ++ unsigned long flags; ++ ++ if (unlikely(list_empty(&msg->transfers))) ++ return -EINVAL; ++ ++ if (bs->stopping) ++ return -ESHUTDOWN; ++ ++ list_for_each_entry(xfer, &msg->transfers, transfer_list) { ++ if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { ++ dev_dbg(&spi->dev, "missing rx or tx buf\n"); ++ return -EINVAL; ++ } ++ ++ if (!xfer->bits_per_word || xfer->speed_hz) ++ continue; ++ ++ ret = bcm2708_setup_state(spi->master, &spi->dev, NULL, ++ xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz, ++ spi->chip_select, spi->mode, ++ xfer->bits_per_word ? xfer->bits_per_word : ++ spi->bits_per_word); ++ if (ret) ++ return ret; ++ } ++ ++ msg->status = -EINPROGRESS; ++ msg->actual_length = 0; ++ ++ spin_lock_irqsave(&bs->lock, flags); ++ list_add_tail(&msg->queue, &bs->queue); ++ queue_work(bs->workq, &bs->work); ++ spin_unlock_irqrestore(&bs->lock, flags); ++ ++ return 0; ++} ++ ++static void bcm2708_spi_cleanup(struct spi_device *spi) ++{ ++ if (spi->controller_state) { ++ kfree(spi->controller_state); ++ spi->controller_state = NULL; ++ } ++} ++ ++static int __devinit bcm2708_spi_probe(struct platform_device *pdev) ++{ ++ struct resource *regs; ++ int irq, err = -ENOMEM; ++ struct clk *clk; ++ struct spi_master *master; ++ struct bcm2708_spi *bs; ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ dev_err(&pdev->dev, "could not get IO memory\n"); ++ return -ENXIO; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) { ++ dev_err(&pdev->dev, "could not get IRQ\n"); ++ return irq; ++ } ++ ++ clk = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(clk)) { ++ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk)); ++ return PTR_ERR(clk); ++ } ++ ++ bcm2708_init_pinmode(); ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(*bs)); ++ if (!master) { ++ dev_err(&pdev->dev, "spi_alloc_master() failed\n"); ++ goto out_clk_put; ++ } ++ ++ /* the spi->mode bits understood by this driver: */ ++ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS; ++ ++ master->bus_num = pdev->id; ++ master->num_chipselect = 3; ++ master->setup = bcm2708_spi_setup; ++ master->transfer = bcm2708_spi_transfer; ++ master->cleanup = bcm2708_spi_cleanup; ++ platform_set_drvdata(pdev, master); ++ ++ bs = spi_master_get_devdata(master); ++ ++ spin_lock_init(&bs->lock); ++ INIT_LIST_HEAD(&bs->queue); ++ init_completion(&bs->done); ++ INIT_WORK(&bs->work, bcm2708_work); ++ ++ bs->base = ioremap(regs->start, resource_size(regs)); ++ if (!bs->base) { ++ dev_err(&pdev->dev, "could not remap memory\n"); ++ goto out_master_put; ++ } ++ ++ bs->workq = create_singlethread_workqueue(dev_name(&pdev->dev)); ++ if (!bs->workq) { ++ dev_err(&pdev->dev, "could not create workqueue\n"); ++ goto out_iounmap; ++ } ++ ++ bs->irq = irq; ++ bs->clk = clk; ++ bs->stopping = false; ++ ++ err = request_irq(irq, bcm2708_spi_interrupt, 0, dev_name(&pdev->dev), ++ master); ++ if (err) { ++ dev_err(&pdev->dev, "could not request IRQ: %d\n", err); ++ goto out_workqueue; ++ } ++ ++ /* initialise the hardware */ ++ clk_enable(clk); ++ bcm2708_wr(bs, SPI_CS, SPI_CS_REN | SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX); ++ ++ err = spi_register_master(master); ++ if (err) { ++ dev_err(&pdev->dev, "could not register SPI master: %d\n", err); ++ goto out_free_irq; ++ } ++ ++ dev_info(&pdev->dev, "SPI Controller at 0x%08lx (irq %d)\n", ++ (unsigned long)regs->start, irq); ++ ++ return 0; ++ ++out_free_irq: ++ free_irq(bs->irq, master); ++out_workqueue: ++ destroy_workqueue(bs->workq); ++out_iounmap: ++ iounmap(bs->base); ++out_master_put: ++ spi_master_put(master); ++out_clk_put: ++ clk_put(clk); ++ return err; ++} ++ ++static int __devexit bcm2708_spi_remove(struct platform_device *pdev) ++{ ++ struct spi_master *master = platform_get_drvdata(pdev); ++ struct bcm2708_spi *bs = spi_master_get_devdata(master); ++ ++ /* reset the hardware and block queue progress */ ++ spin_lock_irq(&bs->lock); ++ bs->stopping = true; ++ bcm2708_wr(bs, SPI_CS, SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX); ++ spin_unlock_irq(&bs->lock); ++ ++ flush_work_sync(&bs->work); ++ ++ clk_disable(bs->clk); ++ clk_put(bs->clk); ++ free_irq(bs->irq, master); ++ iounmap(bs->base); ++ ++ spi_unregister_master(master); ++ ++ return 0; ++} ++ ++static struct platform_driver bcm2708_spi_driver = { ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = bcm2708_spi_probe, ++ .remove = __devexit_p(bcm2708_spi_remove), ++}; ++module_platform_driver(bcm2708_spi_driver); ++ ++MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2708"); ++MODULE_AUTHOR("Chris Boot "); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:" DRV_NAME); +diff -urN upstream-3.2.21/drivers/usb/core/generic.c bootc-3.2.21/drivers/usb/core/generic.c +--- upstream-3.2.21/drivers/usb/core/generic.c 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/core/generic.c 2012-06-23 23:52:29.000000000 +0000 +@@ -149,6 +149,7 @@ + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); ++ dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA); + } + return i; + } +diff -urN upstream-3.2.21/drivers/usb/core/hub.c bootc-3.2.21/drivers/usb/core/hub.c +--- upstream-3.2.21/drivers/usb/core/hub.c 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/core/hub.c 2012-06-23 23:52:29.000000000 +0000 +@@ -1075,6 +1075,8 @@ + INIT_WORK(&hub->tt.clear_work, hub_tt_work); + switch (hdev->descriptor.bDeviceProtocol) { + case 0: ++ dev_dbg(hub_dev, "TT with no hub-specific protocol - " ++ "no TT\n"); + break; + case 1: + dev_dbg(hub_dev, "Single TT\n"); +@@ -1091,6 +1093,7 @@ + hub->tt.hub = hdev; + break; + case 3: ++ dev_dbg(hub_dev, "USB 3.0 hub - no TT\n"); + /* USB 3.0 hubs don't have a TT */ + break; + default: +@@ -1720,6 +1723,12 @@ + #endif + + #ifdef CONFIG_USB_OTG ++ ++static int enable_whitelist; ++module_param(enable_whitelist, bool, S_IRUGO | S_IWUSR); ++MODULE_PARM_DESC(enable_whitelist, ++ "only recognize devices in OTG whitelist if true"); ++ + #include "otg_whitelist.h" + #endif + +@@ -1774,9 +1783,15 @@ + dev_info(&udev->dev, + "can't set HNP mode: %d\n", + err); ++ dev_printk(KERN_CRIT, &udev->dev, ++ "Not Connected/Responding\n"); ++ + bus->b_hnp_enable = 0; ++ } else { ++ dev_info(&udev->dev, ++ "HNP Not Supported\n"); + } +- } ++ } + } + } + +@@ -1785,12 +1800,27 @@ + /* Maybe it can talk to us, though we can't talk to it. + * (Includes HNP test device.) + */ +- if (udev->bus->b_hnp_enable || udev->bus->is_b_host) { ++ if (udev->bus->b_hnp_enable || udev->bus->is_b_host || ++ udev->descriptor.idVendor == 0x1a0a) { + err = usb_port_suspend(udev, PMSG_SUSPEND); +- if (err < 0) ++ if (err < 0) { + dev_dbg(&udev->dev, "HNP fail, %d\n", err); ++ } else { ++ /* Return Connection Refused(ECONNREFUSED) ++ * instead of No Device(ENODEV) so that the ++ * retry loop in hub_port_connect_change() is ++ * exited without disabling the port ++ */ ++ err = -ECONNREFUSED; ++ goto fail; ++ } + } +- err = -ENOTSUPP; ++ //err = -ENOTSUPP; ++ /* Return Not Connected (ENOTCONN) instead of No ++ * Device(ENODEV) so that the retry loop in ++ * hub_port_connect_change() is exited ++ */ ++ err = -ENOTCONN; + goto fail; + } + fail: +@@ -2981,7 +3011,9 @@ + buf->bMaxPacketSize0 = 0; + r = usb_control_msg(udev, usb_rcvaddr0pipe(), + USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, +- USB_DT_DEVICE << 8, 0, ++ USB_DT_DEVICE << 8, ++ //USB_DT_DEVICE << 64, // DWC patch suggestion! ++ 0, + buf, GET_DESCRIPTOR_BUFSIZE, + initial_descriptor_timeout); + switch (buf->bMaxPacketSize0) { +@@ -3427,8 +3459,10 @@ + release_devnum(udev); + hub_free_dev(udev); + usb_put_dev(udev); +- if ((status == -ENOTCONN) || (status == -ENOTSUPP)) +- break; ++ if (status == -ENOTCONN || status == -ENOTSUPP || ++ status == -ECONNREFUSED) ++ // break; //DWC patch ++ return; + } + if (hub->hdev->parent || + !hcd->driver->port_handed_over || +diff -urN upstream-3.2.21/drivers/usb/core/message.c bootc-3.2.21/drivers/usb/core/message.c +--- upstream-3.2.21/drivers/usb/core/message.c 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/core/message.c 2012-06-23 23:52:29.000000000 +0000 +@@ -1838,6 +1838,85 @@ + if (cp->string == NULL && + !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) + cp->string = usb_cache_string(dev, cp->desc.iConfiguration); ++/* Uncomment this define to enable the HS Electrical Test support */ ++#define DWC_HS_ELECT_TST 1 ++#ifdef DWC_HS_ELECT_TST ++ /* Here we implement the HS Electrical Test support. The ++ * tester uses a vendor ID of 0x1A0A to indicate we should ++ * run a special test sequence. The product ID tells us ++ * which sequence to run. We invoke the test sequence by ++ * sending a non-standard SetFeature command to our root ++ * hub port. Our dwc_otg_hcd_hub_control() routine will ++ * recognize the command and perform the desired test ++ * sequence. ++ */ ++ if (dev->descriptor.idVendor == 0x1A0A) { ++ /* HSOTG Electrical Test */ ++ dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n"); ++ ++ if (dev->bus && dev->bus->root_hub) { ++ struct usb_device *hdev = dev->bus->root_hub; ++ dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct); ++ ++ switch (dev->descriptor.idProduct) { ++ case 0x0101: /* TEST_SE0_NAK */ ++ dev_warn(&dev->dev, "TEST_SE0_NAK\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ); ++ break; ++ ++ case 0x0102: /* TEST_J */ ++ dev_warn(&dev->dev, "TEST_J\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ); ++ break; ++ ++ case 0x0103: /* TEST_K */ ++ dev_warn(&dev->dev, "TEST_K\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ); ++ break; ++ ++ case 0x0104: /* TEST_PACKET */ ++ dev_warn(&dev->dev, "TEST_PACKET\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ); ++ break; ++ ++ case 0x0105: /* TEST_FORCE_ENABLE */ ++ dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ); ++ break; ++ ++ case 0x0106: /* HS_HOST_PORT_SUSPEND_RESUME */ ++ dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ); ++ break; ++ ++ case 0x0107: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ); ++ break; ++ ++ case 0x0108: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ); ++ } ++ } ++ } ++#endif /* DWC_HS_ELECT_TST */ + + /* Now that all the interfaces are set up, register them + * to trigger binding of drivers to interfaces. probe() +diff -urN upstream-3.2.21/drivers/usb/core/otg_whitelist.h bootc-3.2.21/drivers/usb/core/otg_whitelist.h +--- upstream-3.2.21/drivers/usb/core/otg_whitelist.h 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/core/otg_whitelist.h 2012-06-23 23:52:29.000000000 +0000 +@@ -19,33 +19,82 @@ + static struct usb_device_id whitelist_table [] = { + + /* hubs are optional in OTG, but very handy ... */ ++#define CERT_WITHOUT_HUBS ++#if defined(CERT_WITHOUT_HUBS) ++{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/ ++#else + { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), }, + { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), }, ++{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), }, ++#endif + + #ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */ + /* FIXME actually, printers are NOT supposed to use device classes; + * they're supposed to use interface classes... + */ +-{ USB_DEVICE_INFO(7, 1, 1) }, +-{ USB_DEVICE_INFO(7, 1, 2) }, +-{ USB_DEVICE_INFO(7, 1, 3) }, ++//{ USB_DEVICE_INFO(7, 1, 1) }, ++//{ USB_DEVICE_INFO(7, 1, 2) }, ++//{ USB_DEVICE_INFO(7, 1, 3) }, + #endif + + #ifdef CONFIG_USB_NET_CDCETHER + /* Linux-USB CDC Ethernet gadget */ +-{ USB_DEVICE(0x0525, 0xa4a1), }, ++//{ USB_DEVICE(0x0525, 0xa4a1), }, + /* Linux-USB CDC Ethernet + RNDIS gadget */ +-{ USB_DEVICE(0x0525, 0xa4a2), }, ++//{ USB_DEVICE(0x0525, 0xa4a2), }, + #endif + + #if defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE) + /* gadget zero, for testing */ +-{ USB_DEVICE(0x0525, 0xa4a0), }, ++//{ USB_DEVICE(0x0525, 0xa4a0), }, + #endif ++ ++/* OPT Tester */ ++{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */ ++{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */ ++{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */ ++{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */ ++{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */ ++{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME */ ++{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */ ++{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */ ++ ++/* Sony cameras */ ++{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), }, ++ ++/* Memory Devices */ ++//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */ ++//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */ ++//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */ ++//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD */ ++{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/ ++//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */ ++ ++/* HP Printers */ ++//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */ ++//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */ ++ ++/* Speakers */ ++//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */ ++//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */ + + { } /* Terminating entry */ + }; + ++static inline void report_errors(struct usb_device *dev) ++{ ++ /* OTG MESSAGE: report errors here, customize to match your product */ ++ dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n", ++ le16_to_cpu(dev->descriptor.idVendor), ++ le16_to_cpu(dev->descriptor.idProduct)); ++ if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){ ++ dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n"); ++ } else { ++ dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n"); ++ } ++} ++ ++ + static int is_targeted(struct usb_device *dev) + { + struct usb_device_id *id = whitelist_table; +@@ -55,58 +104,83 @@ + return 1; + + /* HNP test device is _never_ targeted (see OTG spec 6.6.6) */ +- if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && +- le16_to_cpu(dev->descriptor.idProduct) == 0xbadd)) +- return 0; ++ if (dev->descriptor.idVendor == 0x1a0a && ++ dev->descriptor.idProduct == 0xbadd) { ++ return 0; ++ } else if (!enable_whitelist) { ++ return 1; ++ } else { + +- /* NOTE: can't use usb_match_id() since interface caches +- * aren't set up yet. this is cut/paste from that code. +- */ +- for (id = whitelist_table; id->match_flags; id++) { +- if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && +- id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && +- id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) +- continue; +- +- /* No need to test id->bcdDevice_lo != 0, since 0 is never +- greater than any unsigned number. */ +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && +- (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && +- (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && +- (id->bDeviceClass != dev->descriptor.bDeviceClass)) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && +- (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) +- continue; +- +- if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && +- (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) +- continue; ++#ifdef DEBUG ++ dev_dbg(&dev->dev, "device V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n", ++ dev->descriptor.idVendor, ++ dev->descriptor.idProduct, ++ dev->descriptor.bDeviceClass, ++ dev->descriptor.bDeviceSubClass, ++ dev->descriptor.bDeviceProtocol); ++#endif + + return 1; ++ /* NOTE: can't use usb_match_id() since interface caches ++ * aren't set up yet. this is cut/paste from that code. ++ */ ++ for (id = whitelist_table; id->match_flags; id++) { ++#ifdef DEBUG ++ dev_dbg(&dev->dev, ++ "ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n", ++ id->idVendor, ++ id->idProduct, ++ id->bDeviceClass, ++ id->bDeviceSubClass, ++ id->bDeviceProtocol); ++#endif ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && ++ id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && ++ id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) ++ continue; ++ ++ /* No need to test id->bcdDevice_lo != 0, since 0 is never ++ greater than any unsigned number. */ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && ++ (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && ++ (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && ++ (id->bDeviceClass != dev->descriptor.bDeviceClass)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && ++ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && ++ (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) ++ continue; ++ ++ return 1; ++ } + } + + /* add other match criteria here ... */ + +- +- /* OTG MESSAGE: report errors here, customize to match your product */ +- dev_err(&dev->dev, "device v%04x p%04x is not supported\n", +- le16_to_cpu(dev->descriptor.idVendor), +- le16_to_cpu(dev->descriptor.idProduct)); + #ifdef CONFIG_USB_OTG_WHITELIST ++ report_errors(dev); + return 0; + #else +- return 1; ++ if (enable_whitelist) { ++ report_errors(dev); ++ return 0; ++ } else { ++ return 1; ++ } + #endif + } + +diff -urN upstream-3.2.21/drivers/usb/gadget/file_storage.c bootc-3.2.21/drivers/usb/gadget/file_storage.c +--- upstream-3.2.21/drivers/usb/gadget/file_storage.c 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/gadget/file_storage.c 2012-06-23 23:52:30.000000000 +0000 +@@ -573,8 +573,37 @@ + .iConfiguration = FSG_STRING_CONFIG, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, ++ //.bMaxPower = 0, //unused suggestion by DWC patch + }; + ++#ifdef CONFIG_USB_DWC_OTG_LPM ++#define USB_DEVICE_CAPABILITY_20_EXTENSION 0x02 ++#define USB_20_EXT_LPM 0x02 ++typedef struct usb_dev_cap_20_ext_desc { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ __u8 bDevCapabilityType; ++ __le32 bmAttributes; ++} __attribute__ ((__packed__)) usb_dev_cap_20_ext_desc_t; ++ ++static struct usb_bos_20_ext_desc { ++ struct usb_bos_descriptor bos_desc; ++ struct usb_dev_cap_20_ext_desc dev_cap_20_ext_desc; ++} __attribute__ ((__packed__)) bos_20_ext_desc = { ++ { ++ .bLength = sizeof(struct usb_bos_descriptor), ++ .bDescriptorType = USB_DT_BOS, ++ .wTotalLength = sizeof(struct usb_bos_20_ext_desc), ++ .bNumDeviceCaps = 1, ++ }, ++ { ++ .bLength = sizeof(struct usb_dev_cap_20_ext_desc), ++ .bDescriptorType = USB_DT_DEVICE_CAPABILITY, ++ .bDevCapabilityType = USB_DEVICE_CAPABILITY_20_EXTENSION, ++ .bmAttributes = USB_20_EXT_LPM, ++ }, ++}; ++#endif + + static struct usb_qualifier_descriptor + dev_qualifier = { +@@ -984,13 +1013,29 @@ + break; + + case USB_DT_BOS: ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ /* When the PCD has LPM enabled set the LPM ++ * Feature bit to 1 when not enabled set the ++ * bit to 0. */ ++ if (usb_gadget_test_lpm_support(fsg->gadget)) { ++ VDBG(fsg, "LPM support enabled in DWC UDC PCD\n"); ++ bos_20_ext_desc.dev_cap_20_ext_desc.bmAttributes |= USB_20_EXT_LPM; ++ } else { ++ VDBG(fsg, "LPM support disabled in DWC UDC PCD\n"); ++ bos_20_ext_desc.dev_cap_20_ext_desc.bmAttributes &= ~USB_20_EXT_LPM; ++ } ++ DBG(fsg, "sending BOS descriptor to host\n"); ++ value = sizeof bos_20_ext_desc; ++ memcpy(req->buf, &bos_20_ext_desc, value); ++ break; ++#else + VDBG(fsg, "get bos descriptor\n"); + + if (gadget_is_superspeed(fsg->gadget)) + value = populate_bos(fsg, req->buf); + break; ++#endif + } +- + break; + + /* One config, two speeds */ +@@ -2640,6 +2685,9 @@ + fsg_set_halt(fsg, fsg->bulk_out); + halt_bulk_in_endpoint(fsg); + } ++ fsg->bulk_in->ops->set_halt(fsg->bulk_in, 3); ++ fsg_set_halt(fsg, fsg->bulk_out); ++ fsg->bulk_out->ops->set_halt(fsg->bulk_out, 3); + return -EINVAL; + } + +@@ -2991,7 +3039,8 @@ + * bulk endpoint, clear the halt now. (The SuperH UDC + * requires this.) */ + if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) +- usb_ep_clear_halt(fsg->bulk_in); ++ //usb_ep_clear_halt(fsg->bulk_in); //DWC patch: ++ fsg->bulk_in->ops->set_halt(fsg->bulk_in, 2); + + if (transport_is_bbb()) { + if (fsg->ep0_req_tag == exception_req_tag) +@@ -3065,6 +3114,9 @@ + * that expects a __user pointer and it will work okay. */ + set_fs(get_ds()); + ++ /* Setting this thread high priority */ ++ set_user_nice(current, -20); ++ + /* The main loop */ + while (fsg->state != FSG_STATE_TERMINATED) { + if (exception_in_progress(fsg) || signal_pending(current)) { +@@ -3212,6 +3264,13 @@ + gcnum = usb_gadget_controller_number(fsg->gadget); + if (gcnum >= 0) + mod_data.release = 0x0300 + gcnum; ++ else if (gadget_is_dwc_otg(fsg->gadget)) { ++ mod_data.release = __constant_cpu_to_le16 (0x0200); ++ mod_data.vendor = __constant_cpu_to_le16 (0x053f); ++ if (mod_data.product == DRIVER_PRODUCT_ID) { ++ mod_data.product = __constant_cpu_to_le16 (0x0000); ++ } ++ } + else { + WARNING(fsg, "controller '%s' not recognized\n", + fsg->gadget->name); +@@ -3473,6 +3532,13 @@ + + rc = -ENOMEM; + ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ /* When LPM is enabled, Inform the host that the remote wake ++ * up capability is supported. */ ++ if (usb_gadget_test_lpm_support(fsg->gadget)) ++ config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; ++#endif ++ + /* Allocate the request and buffer for endpoint 0 */ + fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); + if (!req) +diff -urN upstream-3.2.21/drivers/usb/gadget/Kconfig bootc-3.2.21/drivers/usb/gadget/Kconfig +--- upstream-3.2.21/drivers/usb/gadget/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/gadget/Kconfig 2012-06-23 23:52:29.000000000 +0000 +@@ -552,6 +552,12 @@ + depends on USB_GADGET + depends on USB_GADGET_DUALSPEED + ++config USB_DWC_OTG_LPM ++ boolean "Enable LPM support" ++ depends on USB && EXPERIMENTAL ++ help ++ Enables LPM support. ++ + # + # USB Gadget Drivers + # +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_cc.c bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_cc.c +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_cc.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_cc.c 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,506 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port/dwc_cc.c $ ++ * $Revision: #1 $ ++ * $Date: 2008/12/21 $ ++ * $Change: 1156609 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#include "dwc_cc.h" ++ ++typedef struct dwc_cc ++{ ++ uint32_t uid; ++ uint8_t chid[16]; ++ uint8_t cdid[16]; ++ uint8_t ck[16]; ++ uint8_t *name; ++ uint8_t length; ++ DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry; ++} dwc_cc_t; ++ ++DWC_CIRCLEQ_HEAD(context_list, dwc_cc); ++ ++/** The main structure for CC management. */ ++struct dwc_cc_if ++{ ++ dwc_mutex_t *mutex; ++ char *filename; ++ ++ unsigned is_host:1; ++ ++ dwc_notifier_t *notifier; ++ ++ struct context_list list; ++}; ++ ++#ifdef DEBUG ++static inline void dump_bytes(char *name, uint8_t *bytes, int len) ++{ ++ int i; ++ DWC_PRINTF("%s: ", name); ++ for (i=0; ilength = length; ++ cc->name = DWC_ALLOC(length); ++ DWC_MEMCPY(cc->name, name, length); ++ } ++ ++ return cc; ++} ++ ++static void free_cc(dwc_cc_t *cc) ++{ ++ if (cc->name) { ++ DWC_FREE(cc->name); ++ } ++ DWC_FREE(cc); ++} ++ ++static uint32_t next_uid(dwc_cc_if_t *cc_if) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (cc->uid > uid) { ++ uid = cc->uid; ++ } ++ } ++ ++ if (uid == 0) { ++ uid = 255; ++ } ++ ++ return uid + 1; ++} ++ ++static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid) ++{ ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (cc->uid == uid) { ++ return cc; ++ } ++ } ++ return NULL; ++} ++ ++static unsigned int cc_data_size(dwc_cc_if_t *cc_if) ++{ ++ unsigned int size = 0; ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ size += (48 + 1); ++ if (cc->name) { ++ size += cc->length; ++ } ++ } ++ return size; ++} ++ ++static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (DWC_MEMCMP(cc->chid, chid, 16) == 0) { ++ uid = cc->uid; ++ break; ++ } ++ } ++ return uid; ++} ++static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) { ++ uid = cc->uid; ++ break; ++ } ++ } ++ return uid; ++} ++ ++/* Internal cc_add */ ++static int32_t cc_add(dwc_cc_if_t *cc_if, uint8_t *chid, uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ dwc_cc_t *cc; ++ uint32_t uid; ++ ++ if (cc_if->is_host) { ++ uid = cc_match_cdid(cc_if, cdid); ++ } ++ else { ++ uid = cc_match_chid(cc_if, chid); ++ } ++ ++ if (uid) { ++ DWC_DEBUG("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length); ++ cc = cc_find(cc_if, uid); ++ } ++ else { ++ cc = alloc_cc(name, length); ++ cc->uid = next_uid(cc_if); ++ DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry); ++ } ++ ++ DWC_MEMCPY(&(cc->chid[0]), chid, 16); ++ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); ++ DWC_MEMCPY(&(cc->ck[0]), ck, 16); ++ ++ DWC_DEBUG("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length); ++ dump_bytes("CHID", cc->chid, 16); ++ dump_bytes("CDID", cc->cdid, 16); ++ dump_bytes("CK", cc->ck, 16); ++ return cc->uid; ++} ++ ++/* Internal cc_clear */ ++static void cc_clear(dwc_cc_if_t *cc_if) ++{ ++ while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) { ++ dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list); ++ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); ++ free_cc(cc); ++ } ++} ++ ++dwc_cc_if_t *dwc_cc_if_alloc(dwc_notifier_t *notifier, unsigned is_host) ++{ ++ dwc_cc_if_t *cc_if = NULL; ++ ++ /* Allocate a common_cc_if structure */ ++ cc_if = DWC_ALLOC(sizeof(dwc_cc_if_t)); ++ ++ if(!cc_if) ++ return NULL; ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++ DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex); ++#else ++ cc_if->mutex = DWC_MUTEX_ALLOC(); ++#endif ++ DWC_CIRCLEQ_INIT(&cc_if->list); ++ cc_if->is_host = is_host; ++ cc_if->notifier = notifier; ++ return cc_if; ++} ++ ++void dwc_cc_if_free(dwc_cc_if_t *cc_if) ++{ ++ DWC_MUTEX_FREE(cc_if->mutex); ++ cc_clear(cc_if); ++ DWC_FREE(cc_if); ++} ++ ++static void cc_changed(dwc_cc_if_t *cc_if) ++{ ++ if (cc_if->notifier) { ++ dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if); ++ } ++} ++ ++void dwc_cc_clear(dwc_cc_if_t *cc_if) ++{ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc_clear(cc_if); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ cc_changed(cc_if); ++} ++ ++int32_t dwc_cc_add(dwc_cc_if_t *cc_if, uint8_t *chid, uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ uint32_t uid; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_add(cc_if, chid, cdid, ck, name, length); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ cc_changed(cc_if); ++ ++ return uid; ++} ++ ++void dwc_cc_change(dwc_cc_if_t *cc_if, int32_t id, ++ uint8_t *chid, uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ dwc_cc_t* cc; ++ ++ DWC_DEBUG("Change connection context %d", id); ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (!cc) { ++ DWC_ERROR("Uid %d not found in cc list", id); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ ++ if (chid) { ++ DWC_MEMCPY(&(cc->chid[0]), chid, 16); ++ } ++ if (cdid) { ++ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); ++ } ++ if (ck) { ++ DWC_MEMCPY(&(cc->ck[0]), ck, 16); ++ } ++ ++ if (name) { ++ if (cc->name) { ++ DWC_FREE(cc->name); ++ } ++ cc->name = DWC_ALLOC(length); ++ cc->length = length; ++ DWC_MEMCPY(cc->name, name, length); ++ } ++ ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ cc_changed(cc_if); ++ ++ DWC_DEBUG("Changed connection context id=%d\n", id); ++ dump_bytes("New CHID", cc->chid, 16); ++ dump_bytes("New CDID", cc->cdid, 16); ++ dump_bytes("New CK", cc->ck, 16); ++} ++ ++void dwc_cc_remove(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ dwc_cc_t *cc; ++ ++ DWC_DEBUG("Removing connection context %d", id); ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (!cc) { ++ DWC_ERROR("Uid %d not found in cc list", id); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ ++ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ free_cc(cc); ++ ++ cc_changed(cc_if); ++} ++ ++uint8_t *dwc_cc_data_for_save(dwc_cc_if_t *cc_if, unsigned int *length) ++{ ++ uint8_t *buf, *x; ++ uint8_t zero = 0; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ *length = cc_data_size(cc_if); ++ if (!(*length)) { ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return NULL; ++ } ++ ++ DWC_DEBUG("Creating data for saving (length=%d)", *length); ++ ++ buf = DWC_ALLOC(*length); ++ if (!buf) { ++ *length = 0; ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return NULL; ++ } ++ ++ x = buf; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ DWC_MEMCPY(x, cc->chid, 16); ++ x += 16; ++ DWC_MEMCPY(x, cc->cdid, 16); ++ x += 16; ++ DWC_MEMCPY(x, cc->ck, 16); ++ x += 16; ++ if (cc->name) { ++ DWC_MEMCPY(x, &cc->length, 1); ++ x += 1; ++ DWC_MEMCPY(x, cc->name, cc->length); ++ x += cc->length; ++ } ++ else { ++ DWC_MEMCPY(x, &zero, 1); ++ x += 1; ++ } ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return buf; ++} ++ ++void dwc_cc_restore_from_data(dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length) ++{ ++ uint8_t name_length; ++ uint8_t *name; ++ uint8_t *chid; ++ uint8_t *cdid; ++ uint8_t *ck; ++ uint32_t i = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc_clear(cc_if); ++ ++ while (i < length) { ++ chid = &data[i]; ++ i += 16; ++ cdid = &data[i]; ++ i += 16; ++ ck = &data[i]; ++ i += 16; ++ ++ name_length = data[i]; ++ i ++; ++ ++ if (name_length) { ++ name = &data[i]; ++ i += name_length; ++ } ++ else { ++ name = NULL; ++ } ++ ++ /* check to see if we haven't overflown the buffer */ ++ if (i > length) { ++ DWC_ERROR("Data format error while attempting to load CCs " ++ "(nlen=%d, iter=%d, buflen=%d).", name_length, i, length); ++ break; ++ } ++ ++ cc_add(cc_if, chid, cdid, ck, name, name_length); ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ cc_changed(cc_if); ++} ++ ++uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) ++{ ++ uint32_t uid = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_match_chid(cc_if, chid); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return uid; ++} ++uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) ++{ ++ uint32_t uid = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_match_cdid(cc_if, cdid); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return uid; ++} ++ ++uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *ck = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ ck = cc->ck; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return ck; ++ ++} ++ ++uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ retval = cc->chid; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ retval = cc->cdid; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ *length = 0; ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ *length = cc->length; ++ retval = cc->name; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_cc.h bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_cc.h +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_cc.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_cc.h 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,209 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port/dwc_cc.h $ ++ * $Revision: #1 $ ++ * $Date: 2008/12/21 $ ++ * $Change: 1156609 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_CC_H_ ++#define _DWC_CC_H_ ++ ++/** @file ++ * ++ * This file defines the Context Context library. ++ * ++ * The main data structure is dwc_cc_if_t which is returned by either the ++ * dwc_cc_if_alloc function or returned by the module to the user via a provided ++ * function. The data structure is opaque and should only be manipulated via the ++ * functions provied in this API. ++ * ++ * It manages a list of connection contexts and operations can be performed to ++ * add, remove, query, search, and change, those contexts. Additionally, ++ * a dwc_notifier_t object can be requested from the manager so that ++ * the user can be notified whenever the context list has changed. ++ */ ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++#include "dwc_notifier.h" ++ ++ ++/* Notifications */ ++#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION" ++ ++struct dwc_cc_if; ++typedef struct dwc_cc_if dwc_cc_if_t; ++ ++ ++/** @name Connection Context Operations */ ++/** @{ */ ++ ++/** This function allocates memory for a dwc_cc_if_t structure, initializes ++ * fields to default values, and returns a pointer to the structure or NULL on ++ * error. */ ++extern dwc_cc_if_t *dwc_cc_if_alloc(dwc_notifier_t *notifier, unsigned is_host); ++ ++/** Frees the memory for the specified CC structure allocated from ++ * dwc_cc_if_alloc(). */ ++extern void dwc_cc_if_free(dwc_cc_if_t *cc_if); ++ ++/** Removes all contexts from the connection context list */ ++extern void dwc_cc_clear(dwc_cc_if_t *cc_if); ++ ++/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list. ++ * If a CHID already exists, the CK and name are overwritten. Statistics are ++ * not overwritten. ++ * ++ * @param cc_if The cc_if structure. ++ * @param chid A pointer to the 16-byte CHID. This value will be copied. ++ * @param ck A pointer to the 16-byte CK. This value will be copied. ++ * @param cdid A pointer to the 16-byte CDID. This value will be copied. ++ * @param name An optional host friendly name as defined in the association model ++ * spec. Must be a UTF16-LE unicode string. Can be NULL to indicated no name. ++ * @param length The length othe unicode string. ++ * @return A unique identifier used to refer to this context that is valid for ++ * as long as this context is still in the list. */ ++extern int32_t dwc_cc_add(dwc_cc_if_t *cc_if, uint8_t *chid, uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length); ++ ++/** Changes the CHID, CK, CDID, or Name values of a connection context in the ++ * list, preserving any accumulated statistics. This would typically be called ++ * if the host decideds to change the context with a SET_CONNECTION request. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @param chid A pointer to the 16-byte CHID. This value will be copied. NULL ++ * indicates no change. ++ * @param cdid A pointer to the 16-byte CDID. This value will be copied. NULL ++ * indicates no change. ++ * @param ck A pointer to the 16-byte CK. This value will be copied. NULL ++ * indicates no change. ++ * @param name Host friendly name UTF16-LE. NULL indicates no change. ++ * @param length Length of name. */ ++extern void dwc_cc_change(dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid, uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length); ++ ++/** Remove the specified connection context. ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context to remove. */ ++extern void dwc_cc_remove(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Get a binary block of data for the connection context list and attributes. ++ * This data can be used by the OS specific driver to save the connection ++ * context list into non-volatile memory. ++ * ++ * @param cc_if The cc_if structure. ++ * @param length Return the length of the data buffer. ++ * @return A pointer to the data buffer. The memory for this buffer should be freed with DWC_FREE() after use. */ ++extern uint8_t *dwc_cc_data_for_save(dwc_cc_if_t *cc_if, unsigned int *length); ++ ++/** Restore the connection context list from the binary data that was previously ++ * returned from a call to dwc_cc_data_for_save. This can be used by the OS specific ++ * driver to load a connection context list from non-volatile memory. ++ * ++ * @param cc_if The cc_if structure. ++ * @param data The data bytes as returned from dwc_cc_data_for_save. ++ * @param length The length of the data. */ ++extern void dwc_cc_restore_from_data(dwc_cc_if_t *cc_if, uint8_t *data, unsigned int length); ++ ++/** Find the connection context from the specified CHID. ++ * ++ * @param cc_if The cc_if structure. ++ * @param chid A pointer to the CHID data. ++ * @return A non-zero identifier of the connection context if the CHID matches. ++ * Otherwise returns 0. */ ++extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid); ++ ++/** Find the connection context from the specified CDID. ++ * ++ * @param cc_if The cc_if structure. ++ * @param cdid A pointer to the CDID data. ++ * @return A non-zero identifier of the connection context if the CHID matches. ++ * Otherwise returns 0. */ ++extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid); ++ ++/** Retrieve the CK from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CK data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Retrieve the CHID from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CHID data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Retrieve the CDID from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CDID data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id); ++ ++extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length); ++ ++/** Checks a buffer for non-zero. ++ * @param id A pointer to a 16 byte buffer. ++ * @return true if the 16 byte value is non-zero. */ ++static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) { ++ int i; ++ for (i=0; i<16; i++) { ++ if (id[i]) return 1; ++ } ++ return 0; ++} ++ ++/** Checks a buffer for zero. ++ * @param id A pointer to a 16 byte buffer. ++ * @return true if the 16 byte value is zero. */ ++static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) { ++ return !dwc_assoc_is_not_zero_id(id); ++} ++ ++/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into ++ * buffer. */ ++static inline int dwc_print_id_string(char *buffer, uint8_t *id) { ++ char *ptr = buffer; ++ int i; ++ for (i=0; i<16; i++) { ++ ptr += DWC_SPRINTF(ptr, "%02x", id[i]); ++ if (i < 15) { ++ ptr += DWC_SPRINTF(ptr, " "); ++ } ++ } ++ return ptr - buffer; ++} ++ ++/** @} */ ++ ++#endif /* _DWC_CC_H_ */ ++ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_common_linux.c bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_common_linux.c +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_common_linux.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_common_linux.c 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,1138 @@ ++#include "dwc_cc.h" ++#include "dwc_notifier.h" ++ ++#include ++#include ++#include ++#include ++ ++MODULE_DESCRIPTION("DWC Common Library - Portable version"); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE ("GPL"); ++ ++static int dwc_common_port_init_module(void) ++{ ++ printk( KERN_DEBUG "Module dwc_common_port init\n" ); ++#ifdef DEBUG_MEMORY ++ dwc_memory_debug_start(); ++#endif ++ dwc_alloc_notification_manager(); ++ return 0; ++} ++ ++static void dwc_common_port_exit_module(void) ++{ ++ printk( KERN_DEBUG "Module dwc_common_port exit\n" ); ++ dwc_free_notification_manager(); ++#ifdef DEBUG_MEMORY ++ dwc_memory_debug_stop(); ++#endif ++} ++ ++module_init(dwc_common_port_init_module); ++module_exit(dwc_common_port_exit_module); ++ ++/* CC */ ++EXPORT_SYMBOL(dwc_cc_if_alloc); ++EXPORT_SYMBOL(dwc_cc_if_free); ++EXPORT_SYMBOL(dwc_cc_clear); ++EXPORT_SYMBOL(dwc_cc_add); ++EXPORT_SYMBOL(dwc_cc_remove); ++EXPORT_SYMBOL(dwc_cc_change); ++EXPORT_SYMBOL(dwc_cc_data_for_save); ++EXPORT_SYMBOL(dwc_cc_restore_from_data); ++EXPORT_SYMBOL(dwc_cc_match_chid); ++EXPORT_SYMBOL(dwc_cc_match_cdid); ++EXPORT_SYMBOL(dwc_cc_ck); ++EXPORT_SYMBOL(dwc_cc_chid); ++EXPORT_SYMBOL(dwc_cc_cdid); ++EXPORT_SYMBOL(dwc_cc_name); ++ ++/* Notification */ ++EXPORT_SYMBOL(dwc_alloc_notification_manager); ++EXPORT_SYMBOL(dwc_free_notification_manager); ++EXPORT_SYMBOL(dwc_register_notifier); ++EXPORT_SYMBOL(dwc_unregister_notifier); ++EXPORT_SYMBOL(dwc_add_observer); ++EXPORT_SYMBOL(dwc_remove_observer); ++EXPORT_SYMBOL(dwc_notify); ++ ++/* Memory Debugging Routines */ ++#ifdef DEBUG_MEMORY ++EXPORT_SYMBOL(dwc_alloc_debug); ++EXPORT_SYMBOL(dwc_alloc_atomic_debug); ++EXPORT_SYMBOL(dwc_free_debug); ++EXPORT_SYMBOL(dwc_dma_alloc_debug); ++EXPORT_SYMBOL(dwc_dma_alloc_atomic_debug); ++EXPORT_SYMBOL(dwc_dma_free_debug); ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the Linux kernel implementation of the DWC platform library. */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++#include ++#else ++#include ++#endif ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++EXPORT_SYMBOL(DWC_MEMSET); ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++EXPORT_SYMBOL(DWC_MEMCPY); ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ return memmove(dest, src, size); ++} ++EXPORT_SYMBOL(DWC_MEMMOVE); ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++EXPORT_SYMBOL(DWC_MEMCMP); ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++EXPORT_SYMBOL(DWC_STRNCMP); ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++EXPORT_SYMBOL(DWC_STRCMP); ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++EXPORT_SYMBOL(DWC_STRLEN); ++ ++char *DWC_STRCPY(char *to, const char *from) ++{ ++ return strcpy(to, from); ++} ++EXPORT_SYMBOL(DWC_STRCPY); ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ if (!new) { ++ return NULL; ++ } ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++EXPORT_SYMBOL(DWC_STRDUP); ++ ++int DWC_ATOI(char *str, int32_t *value) ++{ ++ char *end = NULL; ++ *value = simple_strtol(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ return -1; ++} ++EXPORT_SYMBOL(DWC_ATOI); ++ ++int DWC_ATOUI(char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ *value = simple_strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ return -1; ++} ++EXPORT_SYMBOL(DWC_ATOUI); ++ ++ ++/* From usbstring.c */ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE); ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++ return in_irq(); ++} ++EXPORT_SYMBOL(DWC_IN_IRQ); ++ ++int DWC_IN_BH(void) ++{ ++ return in_softirq(); ++} ++EXPORT_SYMBOL(DWC_IN_BH); ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintk(format, args); ++} ++EXPORT_SYMBOL(DWC_VPRINTF); ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++EXPORT_SYMBOL(DWC_PRINTF); ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++EXPORT_SYMBOL(DWC_SPRINTF); ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++EXPORT_SYMBOL(DWC_SNPRINTF); ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ va_start(args, format); ++ DWC_PRINTF(KERN_WARNING); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++EXPORT_SYMBOL(__DWC_WARN); ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ va_start(args, format); ++ DWC_PRINTF(KERN_ERR); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++EXPORT_SYMBOL(__DWC_ERROR); ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ va_start(args, format); ++ DWC_PRINTF(KERN_ERR); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++ BUG_ON(1); ++} ++EXPORT_SYMBOL(DWC_EXCEPTION); ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ va_start(args, format); ++ DWC_PRINTF(KERN_DEBUG); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++EXPORT_SYMBOL(__DWC_DEBUG); ++#endif ++ ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, U64 *dma_addr) ++{ ++ return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, U64 *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++ ++#endif ++ ++void *__DWC_DMA_ALLOC(uint32_t size, dwc_dma_t *dma_addr) ++{ ++ void *buf = dma_alloc_coherent(NULL, (size_t)size, dma_addr, GFP_KERNEL); ++ if (!buf) { ++ return NULL; ++ } ++ memset(buf, 0, (size_t)size); ++ return buf; ++} ++EXPORT_SYMBOL(__DWC_DMA_ALLOC); ++ ++void __DWC_DMA_FREE(uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dma_free_coherent(NULL, size, virt_addr, dma_addr); ++} ++EXPORT_SYMBOL(__DWC_DMA_FREE); ++ ++void *__DWC_DMA_ALLOC_ATOMIC(uint32_t size, dwc_dma_t *dma_addr) ++{ ++ void *buf = dma_alloc_coherent(NULL, (size_t)size, dma_addr, GFP_ATOMIC); ++ if (!buf) { ++ return NULL; ++ } ++ memset(buf, 0, (size_t)size); ++ return buf; ++} ++EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC); ++ ++void *__DWC_ALLOC(uint32_t size) ++{ ++ return kzalloc(size, GFP_KERNEL); ++} ++EXPORT_SYMBOL(__DWC_ALLOC); ++ ++void *__DWC_ALLOC_ATOMIC(uint32_t size) ++{ ++ return kzalloc(size, GFP_ATOMIC); ++} ++EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC); ++ ++void __DWC_FREE(void *addr) ++{ ++ kfree(addr); ++} ++EXPORT_SYMBOL(__DWC_FREE); ++ ++/* Byte Ordering Conversions. */ ++uint32_t DWC_CPU_TO_LE32(void *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *((uint32_t *)p); ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++EXPORT_SYMBOL(DWC_CPU_TO_LE32); ++ ++uint32_t DWC_CPU_TO_BE32(void *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *((uint32_t *)p); ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++EXPORT_SYMBOL(DWC_CPU_TO_BE32); ++ ++uint32_t DWC_LE32_TO_CPU(void *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *((uint32_t *)p); ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++ ++#endif ++} ++EXPORT_SYMBOL(DWC_LE32_TO_CPU); ++ ++uint32_t DWC_BE32_TO_CPU(void *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *((uint32_t *)p); ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++EXPORT_SYMBOL(DWC_BE32_TO_CPU); ++ ++uint16_t DWC_CPU_TO_LE16(void *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *((uint16_t *)p); ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++EXPORT_SYMBOL(DWC_CPU_TO_LE16); ++ ++uint16_t DWC_CPU_TO_BE16(void *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *((uint16_t *)p); ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++EXPORT_SYMBOL(DWC_CPU_TO_BE16); ++ ++uint16_t DWC_LE16_TO_CPU(void *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *((uint16_t *)p); ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++EXPORT_SYMBOL(DWC_LE16_TO_CPU); ++ ++uint16_t DWC_BE16_TO_CPU(void *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *((uint16_t *p)p); ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++EXPORT_SYMBOL(DWC_BE16_TO_CPU); ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(uint32_t volatile *reg) ++{ ++ return readl(reg); ++} ++EXPORT_SYMBOL(DWC_READ_REG32); ++ ++#if 0 ++uint64_t DWC_READ_REG64(uint64_t volatile *reg) ++{ ++} ++#endif ++ ++void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value) ++{ ++ writel(value, reg); ++} ++EXPORT_SYMBOL(DWC_WRITE_REG32); ++ ++#if 0 ++void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value) ++{ ++} ++#endif ++ ++void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask) ++{ ++ writel( (readl(reg) & ~clear_mask) | set_mask, reg ); ++} ++EXPORT_SYMBOL(DWC_MODIFY_REG32); ++ ++#if 0 ++void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t value) ++{ ++} ++#endif ++ ++ ++ ++/* Threading */ ++ ++typedef struct work_container ++{ ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_ENTRY(work_container) entry; ++#endif ++ ++ struct delayed_work work; ++} work_container_t; ++ ++#ifdef DEBUG ++DWC_CIRCLEQ_HEAD(work_container_queue, work_container); ++#endif ++ ++struct dwc_workq ++{ ++ struct workqueue_struct *wq; ++ int pending; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ ++#ifdef DEBUG ++ struct work_container_queue entries; ++#endif ++}; ++ ++static void do_work(struct work_struct *work) ++{ ++ int64_t flags; ++ struct delayed_work *dw = container_of(work, struct delayed_work, work); ++ work_container_t *container = container_of(dw, struct work_container, work); ++ dwc_workq_t *wq = container->wq; ++ ++ container->cb(container->data); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); ++#endif ++ ++ if (container->name) { ++ DWC_DEBUG("Work done: %s, container=%p", ++ container->name, container); //GRAYG ++ DWC_FREE(container->name); ++ } ++ DWC_FREE(container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending --; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE); ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ wq->wq = create_singlethread_workqueue(name); ++ wq->pending = 0; ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++ wq->waitq = DWC_WAITQ_ALLOC(); ++#ifdef DEBUG ++ DWC_CIRCLEQ_INIT(&wq->entries); ++#endif ++ return wq; ++} ++EXPORT_SYMBOL(DWC_WORKQ_ALLOC); ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ if (wq->pending != 0) { ++ struct work_container *wc; ++ DWC_ERROR("Destroying work queue with pending work"); ++ DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) { ++ DWC_ERROR("Work %s still pending", wc->name); ++ } ++ } ++#endif ++ destroy_workqueue((struct workqueue_struct *)wq->wq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_FREE(wq); ++} ++EXPORT_SYMBOL(DWC_WORKQ_FREE); ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t work_cb, void *data, char *format, ...) ++{ ++ int64_t flags; ++ work_container_t *container; ++ static char name[128]; ++ ++ va_list args; ++ va_start(args, format); ++ if (format) ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending ++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ ++ container->data = data; ++ container->cb = work_cb; ++ container->wq = wq; ++ if (format) { ++ container->name = DWC_STRDUP(name); ++ DWC_DEBUG("Queueing work: %s, contianer=%p", ++ container->name, container); ++ } else ++ container->name = NULL; ++ ++ INIT_WORK(&container->work.work, do_work); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ ++ queue_work(wq->wq, &container->work.work); ++ ++} ++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE); ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t work_cb, void *data, uint32_t time, char *format, ...) ++{ ++ int64_t flags; ++ work_container_t *container; ++ static char name[128]; ++ ++ va_list args; ++ va_start(args, format); ++ if (format) ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending ++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ ++ container->data = data; ++ container->cb = work_cb; ++ container->wq = wq; ++ if (format) { //GRAYG ++ container->name = DWC_STRDUP(name); ++ DWC_DEBUG("Queueing work: %s, contianer=%p", ++ container->name, container); ++ } else ++ container->name = NULL; ++ INIT_DELAYED_WORK(&container->work, do_work); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ ++ queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time)); ++ ++} ++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED); ++ ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} ++EXPORT_SYMBOL(DWC_WORKQ_PENDING); ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ spinlock_t *sl = (spinlock_t *)1; ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ sl = DWC_ALLOC(sizeof(*sl)); ++ spin_lock_init(sl); ++#endif ++ return (dwc_spinlock_t *)sl; ++} ++EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC); ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ DWC_FREE(lock); ++#endif ++} ++EXPORT_SYMBOL(DWC_SPINLOCK_FREE); ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_lock((spinlock_t *)lock); ++#endif ++} ++EXPORT_SYMBOL(DWC_SPINLOCK); ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_unlock((spinlock_t *)lock); ++#endif ++} ++EXPORT_SYMBOL(DWC_SPINUNLOCK); ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, uint64_t *flags) ++{ ++ unsigned long f; ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_lock_irqsave((spinlock_t *)lock, f); ++#else ++ local_irq_save(f); ++#endif ++ *flags = f; ++} ++EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE); ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, uint64_t flags) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_unlock_irqrestore((spinlock_t *)lock, flags); ++#else ++ // in kernel 2.6.31, at least, we check for unsigned long ++ local_irq_restore((unsigned long)flags); ++#endif ++} ++EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE); ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ dwc_mutex_t *mutex = (dwc_mutex_t*)DWC_ALLOC(sizeof(struct mutex)); ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_init(m); ++ return mutex; ++} ++EXPORT_SYMBOL(DWC_MUTEX_ALLOC); ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ mutex_destroy((struct mutex *)mutex); ++ DWC_FREE(mutex); ++} ++EXPORT_SYMBOL(DWC_MUTEX_FREE); ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_lock(m); ++} ++EXPORT_SYMBOL(DWC_MUTEX_LOCK); ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ return mutex_trylock(m); ++} ++EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK); ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_unlock(m); ++} ++EXPORT_SYMBOL(DWC_MUTEX_UNLOCK); ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t thread_function, char *name, void *data) ++{ ++ struct task_struct *thread = kthread_run(thread_function, data, name); ++ if (thread == ERR_PTR(-ENOMEM)) { ++ return NULL; ++ } ++ return (dwc_thread_t *)thread; ++} ++EXPORT_SYMBOL(DWC_THREAD_RUN); ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ return kthread_stop((struct task_struct *)thread); ++} ++EXPORT_SYMBOL(DWC_THREAD_STOP); ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP() ++{ ++ return kthread_should_stop(); ++} ++EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP); ++ ++/* Timers */ ++ ++struct dwc_timer ++{ ++ struct timer_list *t; ++ char *name; ++ dwc_timer_callback_t cb; ++ void *data; ++ uint8_t scheduled; ++ dwc_spinlock_t *lock; ++}; ++ ++static void set_scheduled(dwc_timer_t *t, int s) ++{ ++ uint64_t flags; ++ DWC_SPINLOCK_IRQSAVE(t->lock, &flags); ++ t->scheduled = s; ++ DWC_SPINUNLOCK_IRQRESTORE(t->lock, flags); ++} ++ ++static int get_scheduled(dwc_timer_t *t) ++{ ++ int s; ++ uint64_t flags; ++ DWC_SPINLOCK_IRQSAVE(t->lock, &flags); ++ s = t->scheduled; ++ DWC_SPINUNLOCK_IRQRESTORE(t->lock, flags); ++ return s; ++} ++ ++static void timer_callback(unsigned long data) ++{ ++ dwc_timer_t *timer = (dwc_timer_t *)data; ++ set_scheduled(timer, 0); ++ DWC_DEBUG("Timer %s callback", timer->name); ++ timer->cb(timer->data); ++} ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ t->t = DWC_ALLOC(sizeof(*t->t)); ++ if (!t->t) { ++ DWC_ERROR("Cannot allocate memory for timer->t"); ++ goto no_timer; ++ } ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++ t->lock = DWC_SPINLOCK_ALLOC(); ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for lock"); ++ goto no_lock; ++ } ++ t->scheduled = 0; ++ t->t->base = &boot_tvec_bases; ++ t->t->expires = jiffies; ++ setup_timer(t->t, timer_callback, (unsigned long)t); ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t->t); ++ no_timer: ++ DWC_FREE(t); ++ return NULL; ++} ++EXPORT_SYMBOL(DWC_TIMER_ALLOC); ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ if (get_scheduled(timer)) { ++ del_timer(timer->t); ++ } ++ ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->t); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++EXPORT_SYMBOL(DWC_TIMER_FREE); ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ if (!get_scheduled(timer)) { ++ set_scheduled(timer, 1); ++ //cgg: DWC_DEBUG("Scheduling timer %s to expire in +%d msec", timer->name, time); ++ timer->t->expires = jiffies + msecs_to_jiffies(time); ++ add_timer(timer->t); ++ } ++ else { ++ //cgg: DWC_DEBUG("Modifying timer %s to expire in +%d msec", timer->name, time); ++ mod_timer(timer->t, jiffies + msecs_to_jiffies(time)); ++ } ++} ++EXPORT_SYMBOL(DWC_TIMER_SCHEDULE); ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ del_timer(timer->t); ++} ++EXPORT_SYMBOL(DWC_TIMER_CANCEL); ++ ++struct dwc_tasklet ++{ ++ struct tasklet_struct t; ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(unsigned long data) ++{ ++ dwc_tasklet_t *t = (dwc_tasklet_t *)data; ++ t->cb(t->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if(t) { ++ t->data = data; ++ t->cb = cb; ++ tasklet_init(&t->t, tasklet_callback, (unsigned long)t); ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet\n"); ++ } ++ ++ return t; ++} ++EXPORT_SYMBOL(DWC_TASK_ALLOC); ++ ++void DWC_TASK_FREE(dwc_tasklet_t *t) ++{ ++ DWC_FREE(t); ++} ++EXPORT_SYMBOL(DWC_TASK_FREE); ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_schedule(&task->t); ++} ++EXPORT_SYMBOL(DWC_TASK_SCHEDULE); ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ udelay(usecs); ++} ++EXPORT_SYMBOL(DWC_UDELAY); ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ mdelay(msecs); ++} ++EXPORT_SYMBOL(DWC_MDELAY); ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ msleep(msecs); ++} ++EXPORT_SYMBOL(DWC_MSLEEP); ++ ++uint32_t DWC_TIME(void) ++{ ++ return jiffies_to_msecs(jiffies); ++} ++EXPORT_SYMBOL(DWC_TIME); ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq ++{ ++ wait_queue_head_t queue; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ init_waitqueue_head(&wq->queue); ++ wq->abort = 0; ++ return wq; ++} ++EXPORT_SYMBOL(DWC_WAITQ_ALLOC); ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ DWC_FREE(wq); ++} ++EXPORT_SYMBOL(DWC_WAITQ_FREE); ++ ++static int32_t check_result(dwc_waitq_t *wq, int result) ++{ int32_t msecs; ++ if (result > 0) { ++ msecs = jiffies_to_msecs(result); ++ if (!msecs) { ++ return 1; ++ } ++ return msecs; ++ } ++ ++ if (result == 0) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ if ((result == -ERESTARTSYS) || (wq->abort == 1)) { ++ return -DWC_E_ABORT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t condition, void *data) ++{ ++ int result = wait_event_interruptible(wq->queue, ++ condition(data) || wq->abort); ++ return check_result(wq, result); ++} ++EXPORT_SYMBOL(DWC_WAITQ_WAIT); ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t condition, ++ void *data, int32_t msecs) ++{ ++ int result = wait_event_interruptible_timeout(wq->queue, ++ condition(data) || wq->abort, ++ msecs_to_jiffies(msecs)); ++ return check_result(wq, result); ++} ++EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT); ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wake_up_interruptible(&wq->queue); ++} ++EXPORT_SYMBOL(DWC_WAITQ_TRIGGER); ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++ wq->abort = 1; ++ DWC_WAITQ_TRIGGER(wq); ++} ++EXPORT_SYMBOL(DWC_WAITQ_ABORT); +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_list.h bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_list.h +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_list.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_list.h 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,616 @@ ++/* $OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $ */ ++/* $NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $ */ ++ ++/* ++ * Copyright (c) 1991, 1993 ++ * The Regents of the University of California. All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. Neither the name of the University nor the names of its contributors ++ * may be used to endorse or promote products derived from this software ++ * without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE ++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ++ * SUCH DAMAGE. ++ * ++ * @(#)queue.h 8.5 (Berkeley) 8/20/94 ++ */ ++ ++#ifndef _SYS_QUEUE_H_ ++#define _SYS_QUEUE_H_ ++ ++ ++/** @file ++ * ++ * This file defines linked list operations. It is derived from BSD with ++ * only the MACRO names being prefixed with DWC_. This is because a few of ++ * these names conflict with those on Linux. For documentation on use, see the ++ * inline comments in the source code. The original license for this source ++ * code applies and is preserved in the dwc_list.h source file. ++ */ ++ ++/* ++ * This file defines five types of data structures: singly-linked lists, ++ * lists, simple queues, tail queues, and circular queues. ++ * ++ * ++ * A singly-linked list is headed by a single forward pointer. The elements ++ * are singly linked for minimum space and pointer manipulation overhead at ++ * the expense of O(n) removal for arbitrary elements. New elements can be ++ * added to the list after an existing element or at the head of the list. ++ * Elements being removed from the head of the list should use the explicit ++ * macro for this purpose for optimum efficiency. A singly-linked list may ++ * only be traversed in the forward direction. Singly-linked lists are ideal ++ * for applications with large datasets and few or no removals or for ++ * implementing a LIFO queue. ++ * ++ * A list is headed by a single forward pointer (or an array of forward ++ * pointers for a hash table header). The elements are doubly linked ++ * so that an arbitrary element can be removed without a need to ++ * traverse the list. New elements can be added to the list before ++ * or after an existing element or at the head of the list. A list ++ * may only be traversed in the forward direction. ++ * ++ * A simple queue is headed by a pair of pointers, one the head of the ++ * list and the other to the tail of the list. The elements are singly ++ * linked to save space, so elements can only be removed from the ++ * head of the list. New elements can be added to the list before or after ++ * an existing element, at the head of the list, or at the end of the ++ * list. A simple queue may only be traversed in the forward direction. ++ * ++ * A tail queue is headed by a pair of pointers, one to the head of the ++ * list and the other to the tail of the list. The elements are doubly ++ * linked so that an arbitrary element can be removed without a need to ++ * traverse the list. New elements can be added to the list before or ++ * after an existing element, at the head of the list, or at the end of ++ * the list. A tail queue may be traversed in either direction. ++ * ++ * A circle queue is headed by a pair of pointers, one to the head of the ++ * list and the other to the tail of the list. The elements are doubly ++ * linked so that an arbitrary element can be removed without a need to ++ * traverse the list. New elements can be added to the list before or after ++ * an existing element, at the head of the list, or at the end of the list. ++ * A circle queue may be traversed in either direction, but has a more ++ * complex end of list detection. ++ * ++ * For details on the use of these macros, see the queue(3) manual page. ++ */ ++ ++/* ++ * Double-linked List. ++ */ ++ ++typedef struct dwc_list_link { ++ struct dwc_list_link *next; ++ struct dwc_list_link *prev; ++} dwc_list_link_t; ++ ++#define DWC_LIST_INIT(link) do{ \ ++ (link)->next = (link); \ ++ (link)->prev = (link); \ ++} while(0) ++ ++#define DWC_LIST_FIRST(link) ((link)->next) ++#define DWC_LIST_LAST(link) ((link)->prev) ++#define DWC_LIST_END(link) (link) ++#define DWC_LIST_NEXT(link) ((link)->next) ++#define DWC_LIST_PREV(link) ((link)->prev) ++#define DWC_LIST_EMPTY(link) \ ++ (DWC_LIST_FIRST(link) == DWC_LIST_END(link)) ++#define DWC_LIST_ENTRY(link, type, field) (type *) \ ++ ((uint8_t *)(link) - (size_t)(&((type *)0)->field)) ++ ++#define DWC_LIST_INSERT_HEAD(list, link) do { \ ++ (link)->next = (list)->next; \ ++ (link)->prev = (list); \ ++ (list)->next->prev = link; \ ++ (list)->next = link; \ ++} while(0) ++ ++#define DWC_LIST_INSERT_TAIL(list, link) do { \ ++ (link)->next = list; \ ++ (link)->prev = (list)->prev; \ ++ (list)->prev->next = link; \ ++ (list)->prev = link; \ ++} while(0) ++ ++#define DWC_LIST_REMOVE(link) do { \ ++ (link)->next->prev = (link)->prev; \ ++ (link)->prev->next = (link)->next; \ ++} while(0) ++ ++#define DWC_LIST_REMOVE_INIT(link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INIT(link); \ ++} while(0) ++ ++#define DWC_LIST_MOVE_HEAD(list, link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INSERT_HEAD(list, link); \ ++} while(0) ++ ++#define DWC_LIST_MOVE_TAIL(list, link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INSERT_TAIL(list, link); \ ++} while(0) ++ ++#define DWC_LIST_FOREACH(var, list) \ ++ for((var) = DWC_LIST_FIRST(list); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = DWC_LIST_NEXT(var)) ++ ++#define DWC_LIST_FOREACH_SAFE(var, var2, list) \ ++ for((var) = DWC_LIST_FIRST(list), var2 = DWC_LIST_NEXT(var); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = (var2), var2 = DWC_LIST_NEXT(var2)) ++ ++#define DWC_LIST_FOREACH_REVERSE(var, list) \ ++ for((var) = DWC_LIST_LAST(list); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = DWC_LIST_PREV(var)) ++ ++/* ++ * Singly-linked List definitions. ++ */ ++#define DWC_SLIST_HEAD(name, type) \ ++struct name { \ ++ struct type *slh_first; /* first element */ \ ++} ++ ++#define DWC_SLIST_HEAD_INITIALIZER(head) \ ++ { NULL } ++ ++#define DWC_SLIST_ENTRY(type) \ ++struct { \ ++ struct type *sle_next; /* next element */ \ ++} ++ ++/* ++ * Singly-linked List access methods. ++ */ ++#define DWC_SLIST_FIRST(head) ((head)->slh_first) ++#define DWC_SLIST_END(head) NULL ++#define DWC_SLIST_EMPTY(head) (SLIST_FIRST(head) == SLIST_END(head)) ++#define DWC_SLIST_NEXT(elm, field) ((elm)->field.sle_next) ++ ++#define DWC_SLIST_FOREACH(var, head, field) \ ++ for((var) = SLIST_FIRST(head); \ ++ (var) != SLIST_END(head); \ ++ (var) = SLIST_NEXT(var, field)) ++ ++#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field) \ ++ for ((varp) = &SLIST_FIRST((head)); \ ++ ((var) = *(varp)) != SLIST_END(head); \ ++ (varp) = &SLIST_NEXT((var), field)) ++ ++/* ++ * Singly-linked List functions. ++ */ ++#define DWC_SLIST_INIT(head) { \ ++ SLIST_FIRST(head) = SLIST_END(head); \ ++} ++ ++#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do { \ ++ (elm)->field.sle_next = (slistelm)->field.sle_next; \ ++ (slistelm)->field.sle_next = (elm); \ ++} while (0) ++ ++#define DWC_SLIST_INSERT_HEAD(head, elm, field) do { \ ++ (elm)->field.sle_next = (head)->slh_first; \ ++ (head)->slh_first = (elm); \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do { \ ++ (elm)->field.sle_next = (elm)->field.sle_next->field.sle_next; \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE_HEAD(head, field) do { \ ++ (head)->slh_first = (head)->slh_first->field.sle_next; \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE(head, elm, type, field) do { \ ++ if ((head)->slh_first == (elm)) { \ ++ SLIST_REMOVE_HEAD((head), field); \ ++ } \ ++ else { \ ++ struct type *curelm = (head)->slh_first; \ ++ while( curelm->field.sle_next != (elm) ) \ ++ curelm = curelm->field.sle_next; \ ++ curelm->field.sle_next = \ ++ curelm->field.sle_next->field.sle_next; \ ++ } \ ++} while (0) ++ ++#if 0 ++ ++/* ++ * List definitions. ++ */ ++#define DWC_LIST_HEAD(name, type) \ ++struct name { \ ++ struct type *lh_first; /* first element */ \ ++} ++ ++#define DWC_LIST_HEAD_INITIALIZER(head) \ ++ { NULL } ++ ++#define DWC_LIST_ENTRY(type) \ ++struct { \ ++ struct type *le_next; /* next element */ \ ++ struct type **le_prev; /* address of previous next element */ \ ++} ++ ++/* ++ * List access methods ++ */ ++#define DWC_LIST_FIRST(head) ((head)->lh_first) ++#define DWC_LIST_END(head) NULL ++#define DWC_LIST_EMPTY(head) (DWC_LIST_FIRST(head) == DWC_LIST_END(head)) ++#define DWC_LIST_NEXT(elm, field) ((elm)->field.le_next) ++ ++#define DWC_LIST_FOREACH(var, head, field) \ ++ for((var) = DWC_LIST_FIRST(head); \ ++ (var)!= DWC_LIST_END(head); \ ++ (var) = DWC_LIST_NEXT(var, field)) ++#define DWC_LIST_FOREACH_SAFE(var, var2, head, field) \ ++ for((var) = DWC_LIST_FIRST(head), var2 = DWC_LIST_NEXT(var, field); \ ++ (var) != DWC_LIST_END(head); \ ++ (var) = var2, var2 = DWC_LIST_NEXT(var, field)) ++ ++/* ++ * List functions. ++ */ ++#define DWC_LIST_INIT(head) do { \ ++ DWC_LIST_FIRST(head) = DWC_LIST_END(head); \ ++} while (0) ++ ++#define DWC_LIST_INSERT_AFTER(listelm, elm, field) do { \ ++ if (((elm)->field.le_next = (listelm)->field.le_next) != NULL) \ ++ (listelm)->field.le_next->field.le_prev = \ ++ &(elm)->field.le_next; \ ++ (listelm)->field.le_next = (elm); \ ++ (elm)->field.le_prev = &(listelm)->field.le_next; \ ++} while (0) ++ ++#define DWC_LIST_INSERT_BEFORE(listelm, elm, field) do { \ ++ (elm)->field.le_prev = (listelm)->field.le_prev; \ ++ (elm)->field.le_next = (listelm); \ ++ *(listelm)->field.le_prev = (elm); \ ++ (listelm)->field.le_prev = &(elm)->field.le_next; \ ++} while (0) ++ ++#define DWC_LIST_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.le_next = (head)->lh_first) != NULL) \ ++ (head)->lh_first->field.le_prev = &(elm)->field.le_next;\ ++ (head)->lh_first = (elm); \ ++ (elm)->field.le_prev = &(head)->lh_first; \ ++} while (0) ++ ++#define DWC_LIST_REMOVE(elm, field) do { \ ++ if ((elm)->field.le_next != NULL) \ ++ (elm)->field.le_next->field.le_prev = \ ++ (elm)->field.le_prev; \ ++ *(elm)->field.le_prev = (elm)->field.le_next; \ ++} while (0) ++ ++#define DWC_LIST_REPLACE(elm, elm2, field) do { \ ++ if (((elm2)->field.le_next = (elm)->field.le_next) != NULL) \ ++ (elm2)->field.le_next->field.le_prev = \ ++ &(elm2)->field.le_next; \ ++ (elm2)->field.le_prev = (elm)->field.le_prev; \ ++ *(elm2)->field.le_prev = (elm2); \ ++} while (0) ++ ++#endif ++ ++/* ++ * Simple queue definitions. ++ */ ++#define DWC_SIMPLEQ_HEAD(name, type) \ ++struct name { \ ++ struct type *sqh_first; /* first element */ \ ++ struct type **sqh_last; /* addr of last next element */ \ ++} ++ ++#define DWC_SIMPLEQ_HEAD_INITIALIZER(head) \ ++ { NULL, &(head).sqh_first } ++ ++#define DWC_SIMPLEQ_ENTRY(type) \ ++struct { \ ++ struct type *sqe_next; /* next element */ \ ++} ++ ++/* ++ * Simple queue access methods. ++ */ ++#define DWC_SIMPLEQ_FIRST(head) ((head)->sqh_first) ++#define DWC_SIMPLEQ_END(head) NULL ++#define DWC_SIMPLEQ_EMPTY(head) (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head)) ++#define DWC_SIMPLEQ_NEXT(elm, field) ((elm)->field.sqe_next) ++ ++#define DWC_SIMPLEQ_FOREACH(var, head, field) \ ++ for((var) = SIMPLEQ_FIRST(head); \ ++ (var) != SIMPLEQ_END(head); \ ++ (var) = SIMPLEQ_NEXT(var, field)) ++ ++/* ++ * Simple queue functions. ++ */ ++#define DWC_SIMPLEQ_INIT(head) do { \ ++ (head)->sqh_first = NULL; \ ++ (head)->sqh_last = &(head)->sqh_first; \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.sqe_next = (head)->sqh_first) == NULL) \ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++ (head)->sqh_first = (elm); \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.sqe_next = NULL; \ ++ *(head)->sqh_last = (elm); \ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++ (listelm)->field.sqe_next = (elm); \ ++} while (0) ++ ++#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do { \ ++ if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \ ++ (head)->sqh_last = &(head)->sqh_first; \ ++} while (0) ++ ++/* ++ * Tail queue definitions. ++ */ ++#define DWC_TAILQ_HEAD(name, type) \ ++struct name { \ ++ struct type *tqh_first; /* first element */ \ ++ struct type **tqh_last; /* addr of last next element */ \ ++} ++ ++#define DWC_TAILQ_HEAD_INITIALIZER(head) \ ++ { NULL, &(head).tqh_first } ++ ++#define DWC_TAILQ_ENTRY(type) \ ++struct { \ ++ struct type *tqe_next; /* next element */ \ ++ struct type **tqe_prev; /* address of previous next element */ \ ++} ++ ++/* ++ * tail queue access methods ++ */ ++#define DWC_TAILQ_FIRST(head) ((head)->tqh_first) ++#define DWC_TAILQ_END(head) NULL ++#define DWC_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next) ++#define DWC_TAILQ_LAST(head, headname) \ ++ (*(((struct headname *)((head)->tqh_last))->tqh_last)) ++/* XXX */ ++#define DWC_TAILQ_PREV(elm, headname, field) \ ++ (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last)) ++#define DWC_TAILQ_EMPTY(head) \ ++ (TAILQ_FIRST(head) == TAILQ_END(head)) ++ ++#define DWC_TAILQ_FOREACH(var, head, field) \ ++ for((var) = TAILQ_FIRST(head); \ ++ (var) != TAILQ_END(head); \ ++ (var) = TAILQ_NEXT(var, field)) ++ ++#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field) \ ++ for((var) = TAILQ_LAST(head, headname); \ ++ (var) != TAILQ_END(head); \ ++ (var) = TAILQ_PREV(var, headname, field)) ++ ++/* ++ * Tail queue functions. ++ */ ++#define DWC_TAILQ_INIT(head) do { \ ++ (head)->tqh_first = NULL; \ ++ (head)->tqh_last = &(head)->tqh_first; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.tqe_next = (head)->tqh_first) != NULL) \ ++ (head)->tqh_first->field.tqe_prev = \ ++ &(elm)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++ (head)->tqh_first = (elm); \ ++ (elm)->field.tqe_prev = &(head)->tqh_first; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.tqe_next = NULL; \ ++ (elm)->field.tqe_prev = (head)->tqh_last; \ ++ *(head)->tqh_last = (elm); \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\ ++ (elm)->field.tqe_next->field.tqe_prev = \ ++ &(elm)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++ (listelm)->field.tqe_next = (elm); \ ++ (elm)->field.tqe_prev = &(listelm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do { \ ++ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \ ++ (elm)->field.tqe_next = (listelm); \ ++ *(listelm)->field.tqe_prev = (elm); \ ++ (listelm)->field.tqe_prev = &(elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_REMOVE(head, elm, field) do { \ ++ if (((elm)->field.tqe_next) != NULL) \ ++ (elm)->field.tqe_next->field.tqe_prev = \ ++ (elm)->field.tqe_prev; \ ++ else \ ++ (head)->tqh_last = (elm)->field.tqe_prev; \ ++ *(elm)->field.tqe_prev = (elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do { \ ++ if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL) \ ++ (elm2)->field.tqe_next->field.tqe_prev = \ ++ &(elm2)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm2)->field.tqe_next; \ ++ (elm2)->field.tqe_prev = (elm)->field.tqe_prev; \ ++ *(elm2)->field.tqe_prev = (elm2); \ ++} while (0) ++ ++/* ++ * Circular queue definitions. ++ */ ++#define DWC_CIRCLEQ_HEAD(name, type) \ ++struct name { \ ++ struct type *cqh_first; /* first element */ \ ++ struct type *cqh_last; /* last element */ \ ++} ++ ++#define DWC_CIRCLEQ_HEAD_INITIALIZER(head) \ ++ { DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) } ++ ++#define DWC_CIRCLEQ_ENTRY(type) \ ++struct { \ ++ struct type *cqe_next; /* next element */ \ ++ struct type *cqe_prev; /* previous element */ \ ++} ++ ++/* ++ * Circular queue access methods ++ */ ++#define DWC_CIRCLEQ_FIRST(head) ((head)->cqh_first) ++#define DWC_CIRCLEQ_LAST(head) ((head)->cqh_last) ++#define DWC_CIRCLEQ_END(head) ((void *)(head)) ++#define DWC_CIRCLEQ_NEXT(elm, field) ((elm)->field.cqe_next) ++#define DWC_CIRCLEQ_PREV(elm, field) ((elm)->field.cqe_prev) ++#define DWC_CIRCLEQ_EMPTY(head) \ ++ (DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head)) ++ ++#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL)) ++ ++#define DWC_CIRCLEQ_FOREACH(var, head, field) \ ++ for((var) = DWC_CIRCLEQ_FIRST(head); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = DWC_CIRCLEQ_NEXT(var, field)) ++ ++#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field) \ ++ for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field)) ++ ++#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field) \ ++ for((var) = DWC_CIRCLEQ_LAST(head); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = DWC_CIRCLEQ_PREV(var, field)) ++ ++/* ++ * Circular queue functions. ++ */ ++#define DWC_CIRCLEQ_INIT(head) do { \ ++ (head)->cqh_first = DWC_CIRCLEQ_END(head); \ ++ (head)->cqh_last = DWC_CIRCLEQ_END(head); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do { \ ++ (elm)->field.cqe_next = NULL; \ ++ (elm)->field.cqe_prev = NULL; \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ (elm)->field.cqe_next = (listelm)->field.cqe_next; \ ++ (elm)->field.cqe_prev = (listelm); \ ++ if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm); \ ++ else \ ++ (listelm)->field.cqe_next->field.cqe_prev = (elm); \ ++ (listelm)->field.cqe_next = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do { \ ++ (elm)->field.cqe_next = (listelm); \ ++ (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \ ++ if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm); \ ++ else \ ++ (listelm)->field.cqe_prev->field.cqe_next = (elm); \ ++ (listelm)->field.cqe_prev = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do { \ ++ (elm)->field.cqe_next = (head)->cqh_first; \ ++ (elm)->field.cqe_prev = DWC_CIRCLEQ_END(head); \ ++ if ((head)->cqh_last == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm); \ ++ else \ ++ (head)->cqh_first->field.cqe_prev = (elm); \ ++ (head)->cqh_first = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.cqe_next = DWC_CIRCLEQ_END(head); \ ++ (elm)->field.cqe_prev = (head)->cqh_last; \ ++ if ((head)->cqh_first == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm); \ ++ else \ ++ (head)->cqh_last->field.cqe_next = (elm); \ ++ (head)->cqh_last = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REMOVE(head, elm, field) do { \ ++ if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm)->field.cqe_prev; \ ++ else \ ++ (elm)->field.cqe_next->field.cqe_prev = \ ++ (elm)->field.cqe_prev; \ ++ if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm)->field.cqe_next; \ ++ else \ ++ (elm)->field.cqe_prev->field.cqe_next = \ ++ (elm)->field.cqe_next; \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do { \ ++ DWC_CIRCLEQ_REMOVE(head, elm, field); \ ++ DWC_CIRCLEQ_INIT_ENTRY(elm, field); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do { \ ++ if (((elm2)->field.cqe_next = (elm)->field.cqe_next) == \ ++ DWC_CIRCLEQ_END(head)) \ ++ (head).cqh_last = (elm2); \ ++ else \ ++ (elm2)->field.cqe_next->field.cqe_prev = (elm2); \ ++ if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) == \ ++ DWC_CIRCLEQ_END(head)) \ ++ (head).cqh_first = (elm2); \ ++ else \ ++ (elm2)->field.cqe_prev->field.cqe_next = (elm2); \ ++} while (0) ++ ++#endif /* !_SYS_QUEUE_H_ */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_mem.c bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_mem.c +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_mem.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_mem.c 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,172 @@ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++/* Memory Debugging */ ++#ifdef DEBUG_MEMORY ++ ++struct allocation ++{ ++ void *addr; ++ char *func; ++ int line; ++ uint32_t size; ++ int dma; ++ DWC_CIRCLEQ_ENTRY(allocation) entry; ++}; ++ ++DWC_CIRCLEQ_HEAD(allocation_queue, allocation); ++ ++struct allocation_manager ++{ ++ struct allocation_queue allocations; ++ ++ /* statistics */ ++ int num; ++ int num_freed; ++ int num_active; ++ uint32_t total; ++ uint32_t current; ++ uint32_t max; ++}; ++ ++ ++static struct allocation_manager *manager = NULL; ++ ++static void add_allocation(uint32_t size, char const* func, int line, void *addr, int dma) ++{ ++ struct allocation *a = __DWC_ALLOC_ATOMIC(sizeof(*a)); ++ a->func = __DWC_ALLOC_ATOMIC(DWC_STRLEN(func)+1); ++ DWC_MEMCPY(a->func, func, DWC_STRLEN(func)+1); ++ a->line = line; ++ a->size = size; ++ a->addr = addr; ++ a->dma = dma; ++ DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry); ++ ++ /* Update stats */ ++ manager->num ++; ++ manager->num_active ++; ++ manager->total += size; ++ manager->current += size; ++ if (manager->max < manager->current) { ++ manager->max = manager->current; ++ } ++} ++ ++static struct allocation *find_allocation(void *addr) ++{ ++ struct allocation *a; ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ if (a->addr == addr) { ++ return a; ++ } ++ } ++ return NULL; ++} ++ ++static void free_allocation(void *addr, char const* func, int line) ++{ ++ struct allocation *a = find_allocation(addr); ++ if (!a && func && (line >= 0)) { ++ DWC_ASSERT(0, "Free of address %p that was never allocated or already freed %s:%d", addr, func, line); ++ return; ++ } ++ DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry); ++ ++ manager->num_active --; ++ manager->num_freed ++; ++ manager->current -= a->size; ++ __DWC_FREE(a->func); ++ __DWC_FREE(a); ++} ++ ++void dwc_memory_debug_start(void) ++{ ++ DWC_ASSERT(manager == NULL, "Memory debugging has already started\n"); ++ if (manager == NULL) { ++ manager = __DWC_ALLOC(sizeof(*manager)); ++ } ++ ++ DWC_CIRCLEQ_INIT(&manager->allocations); ++ manager->num = 0; ++ manager->num_freed = 0; ++ manager->num_active = 0; ++ manager->total = 0; ++ manager->current = 0; ++ manager->max = 0; ++} ++ ++void dwc_memory_debug_stop(void) ++{ ++ struct allocation *a; ++ dwc_memory_debug_report(); ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line); ++ free_allocation(a->addr, NULL, -1); ++ } ++ ++ __DWC_FREE(manager); ++} ++ ++void dwc_memory_debug_report(void) ++{ ++ struct allocation *a; ++ DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n"); ++ DWC_PRINTF("Num Allocations = %d\n", manager->num); ++ DWC_PRINTF("Freed = %d\n", manager->num_freed); ++ DWC_PRINTF("Active = %d\n", manager->num_active); ++ DWC_PRINTF("Current Memory Used = %d\n", manager->current); ++ DWC_PRINTF("Total Memory Used = %d\n", manager->total); ++ DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max); ++ DWC_PRINTF("Unfreed allocations:\n"); ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ DWC_PRINTF(" addr=%p, size=%d from %s:%d, DMA=%d\n", a->addr, a->size, a->func, a->line, a->dma); ++ } ++} ++ ++ ++ ++/* The replacement functions */ ++void *dwc_alloc_debug(uint32_t size, char const* func, int line) ++{ ++ void *addr = __DWC_ALLOC(size); ++ add_allocation(size, func, line, addr, 0); ++ return addr; ++} ++ ++void *dwc_alloc_atomic_debug(uint32_t size, char const* func, int line) ++{ ++ void *addr = __DWC_ALLOC_ATOMIC(size); ++ add_allocation(size, func, line, addr, 0); ++ return addr; ++} ++ ++void dwc_free_debug(void *addr, char const* func, int line) ++{ ++ free_allocation(addr, func, line); ++ __DWC_FREE(addr); ++} ++ ++void *dwc_dma_alloc_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line) ++{ ++ void *addr = __DWC_DMA_ALLOC(size, dma_addr); ++ add_allocation(size, func, line, addr, 1); ++ return addr; ++} ++ ++void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line) ++{ ++ void *addr = __DWC_DMA_ALLOC_ATOMIC(size, dma_addr); ++ add_allocation(size, func, line, addr, 1); ++ return addr; ++} ++ ++void dwc_dma_free_debug(uint32_t size, void *virt_addr, dwc_dma_t dma_addr, char const *func, int line) ++{ ++ free_allocation(virt_addr, func, line); ++ __DWC_DMA_FREE(size, virt_addr, dma_addr); ++} ++ ++#endif /* DEBUG_MEMORY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_notifier.c bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_notifier.c +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_notifier.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_notifier.c 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,256 @@ ++#include "dwc_notifier.h" ++#include "dwc_list.h" ++ ++typedef struct dwc_observer ++{ ++ void *observer; ++ dwc_notifier_callback_t callback; ++ void *data; ++ char *notification; ++ DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry; ++} observer_t; ++ ++DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer); ++ ++typedef struct dwc_notifier ++{ ++ void *object; ++ struct observer_queue observers; ++ DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry; ++} notifier_t; ++ ++DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier); ++ ++typedef struct manager ++{ ++ dwc_workq_t *wq; ++ dwc_mutex_t *mutex; ++ struct notifier_queue notifiers; ++} manager_t; ++ ++static manager_t *manager = NULL; ++ ++static void create_manager(void) ++{ ++ manager = DWC_ALLOC(sizeof(manager_t)); ++ DWC_CIRCLEQ_INIT(&manager->notifiers); ++ manager->wq = DWC_WORKQ_ALLOC("DWC Notification WorkQ"); ++} ++ ++static void free_manager(void) ++{ ++ DWC_WORKQ_FREE(manager->wq); ++ /* All notifiers must have unregistered themselves before this module ++ * can be removed. Hitting this assertion indicates a programmer ++ * error. */ ++ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers), "Notification manager being freed before all notifiers have been removed"); ++ DWC_FREE(manager); ++} ++ ++#ifdef DEBUG ++static void dump_manager(void) ++{ ++ notifier_t *n; ++ observer_t *o; ++ DWC_ASSERT(manager, "Notification manager not found"); ++ DWC_DEBUG("List of all notifiers and observers:"); ++ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { ++ DWC_DEBUG("Notifier %p has observers:", n->object); ++ DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) { ++ DWC_DEBUG(" %p watching %s", o->observer, o->notification); ++ } ++ } ++} ++#else ++#define dump_manager(...) ++#endif ++ ++static observer_t *alloc_observer(void *observer, char *notification, dwc_notifier_callback_t callback, void *data) ++{ ++ observer_t *new_observer = DWC_ALLOC(sizeof(observer_t)); ++ DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry); ++ new_observer->observer = observer; ++ new_observer->notification = notification; ++ new_observer->callback = callback; ++ new_observer->data = data; ++ return new_observer; ++} ++ ++static void free_observer(observer_t *observer) ++{ ++ DWC_FREE(observer); ++} ++ ++static notifier_t *alloc_notifier(void *object) ++{ ++ notifier_t *notifier; ++ ++ if (!object) { ++ return NULL; ++ } ++ ++ notifier = DWC_ALLOC(sizeof(notifier_t)); ++ DWC_CIRCLEQ_INIT(¬ifier->observers); ++ DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry); ++ ++ notifier->object = object; ++ return notifier; ++} ++ ++static void free_notifier(notifier_t *notifier) ++{ ++ observer_t *observer; ++ DWC_CIRCLEQ_FOREACH(observer, ¬ifier->observers, list_entry) { ++ free_observer(observer); ++ } ++ DWC_FREE(notifier); ++} ++ ++static notifier_t *find_notifier(void *object) ++{ ++ notifier_t *notifier; ++ if (!object) { ++ return NULL; ++ } ++ DWC_ASSERT(manager, "Notification manager not found"); ++ DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) { ++ if (notifier->object == object) { ++ return notifier; ++ } ++ } ++ return NULL; ++} ++ ++void dwc_alloc_notification_manager(void) ++{ ++ create_manager(); ++} ++ ++void dwc_free_notification_manager(void) ++{ ++ free_manager(); ++} ++ ++dwc_notifier_t *dwc_register_notifier(void *object) ++{ ++ notifier_t *notifier = find_notifier(object); ++ DWC_ASSERT(manager, "Notification manager not found"); ++ if (notifier) { ++ DWC_ERROR("Notifier %p is already registered", object); ++ return NULL; ++ } ++ ++ notifier = alloc_notifier(object); ++ DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry); ++ ++ ++ DWC_INFO("Notifier %p registered", object); ++ dump_manager(); ++ ++ return notifier; ++} ++ ++void dwc_unregister_notifier(dwc_notifier_t *notifier) ++{ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ if (!DWC_CIRCLEQ_EMPTY(¬ifier->observers)) { ++ observer_t *o; ++ DWC_ERROR("Notifier %p has active observers when removing", notifier->object); ++ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { ++ DWC_DEBUG(" %p watching %s", o->observer, o->notification); ++ } ++ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(¬ifier->observers), "Notifier %p has active observers when removing", notifier); ++ } ++ ++ DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry); ++ free_notifier(notifier); ++ ++ DWC_INFO("Notifier unregistered"); ++ dump_manager(); ++} ++ ++/* Add an observer to observe the notifier for a particular state, event, or notification. */ ++int dwc_add_observer(void *observer, void *object, char *notification, dwc_notifier_callback_t callback, void *data) ++{ ++ notifier_t *notifier = find_notifier(object); ++ observer_t *new_observer; ++ if (!notifier) { ++ DWC_ERROR("Notifier %p is not found when adding observer", object); ++ return -1; ++ } ++ ++ new_observer = alloc_observer(observer, notification, callback, data); ++ ++ DWC_CIRCLEQ_INSERT_TAIL(¬ifier->observers, new_observer, list_entry); ++ ++ DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p", ++ observer, object, notification, callback, data); ++ ++ dump_manager(); ++ return 0; ++} ++ ++int dwc_remove_observer(void *observer) ++{ ++ notifier_t *n; ++ DWC_ASSERT(manager, "Notification manager not found"); ++ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { ++ observer_t *o; ++ observer_t *o2; ++ DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) { ++ if (o->observer == observer) { ++ DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry); ++ DWC_INFO("Removing observer %p from notifier %p watching notification %s:", ++ o->observer, n->object, o->notification); ++ free_observer(o); ++ } ++ } ++ } ++ ++ dump_manager(); ++ return 0; ++} ++ ++typedef struct callback_data ++{ ++ dwc_notifier_callback_t cb; ++ void *observer; ++ void *data; ++ void *object; ++ void *notification; ++ void *notification_data; ++} cb_data_t; ++ ++static void cb_task(void *data) ++{ ++ cb_data_t *cb = (cb_data_t *)data; ++ cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data); ++ DWC_FREE(cb); ++} ++ ++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data) ++{ ++ observer_t *o; ++ DWC_ASSERT(manager, "Notification manager not found"); ++ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { ++ int len = DWC_STRLEN(notification); ++ if (DWC_STRLEN(o->notification) != len) { ++ continue; ++ } ++ ++ if (DWC_STRNCMP(o->notification, notification, len) == 0) { ++ cb_data_t *cb_data = DWC_ALLOC(sizeof(cb_data_t)); ++ cb_data->cb = o->callback; ++ cb_data->observer = o->observer; ++ cb_data->data = o->data; ++ cb_data->object = notifier->object; ++ cb_data->notification = notification; ++ cb_data->notification_data = notification_data; ++ DWC_DEBUG("Observer found %p for notification %s", o->observer, notification); ++ DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data, ++ "Notify callback from %p for Notification %s, to observer %p", ++ cb_data->object, notification, cb_data->observer); ++ } ++ } ++} ++ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_notifier.h bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_notifier.h +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_notifier.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_notifier.h 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,112 @@ ++ ++#ifndef __DWC_NOTIFIER_H__ ++#define __DWC_NOTIFIER_H__ ++ ++#include "dwc_os.h" ++ ++/** @file ++ * ++ * A simple implementation of the Observer pattern. Any "module" can ++ * register as an observer or notifier. The notion of "module" is abstract and ++ * can mean anything used to identify either an observer or notifier. Usually ++ * it will be a pointer to a data structure which contains some state, ie an ++ * object. ++ * ++ * Before any notifiers can be added, the global notification manager must be ++ * brought up with dwc_alloc_notification_manager(). ++ * dwc_free_notification_manager() will bring it down and free all resources. ++ * These would typically be called upon module load and unload. The ++ * notification manager is a single global instance that handles all registered ++ * observable modules and observers so this should be done only once. ++ * ++ * A module can be observable by using Notifications to publicize some general ++ * information about it's state or operation. It does not care who listens, or ++ * even if anyone listens, or what they do with the information. The observable ++ * modules do not need to know any information about it's observers or their ++ * interface, or their state or data. ++ * ++ * Any module can register to emit Notifications. It should publish a list of ++ * notifications that it can emit and their behavior, such as when they will get ++ * triggered, and what information will be provided to the observer. Then it ++ * should register itself as an observable module. See dwc_register_notifier(). ++ * ++ * Any module can observe any observable, registered module, provided it has a ++ * handle to the other module and knows what notifications to observe. See ++ * dwc_add_observer(). ++ * ++ * A function of type dwc_notifier_callback_t is called whenever a notification ++ * is triggered with one or more observers observing it. This function is ++ * called in it's own process so it may sleep or block if needed. It is ++ * guaranteed to be called sometime after the notification has occurred and will ++ * be called once per each time the notification is triggered. It will NOT be ++ * called in the same process context used to trigger the notification. ++ * ++ * @section Limitiations ++ * ++ * Keep in mind that Notifications that can be triggered in rapid sucession may ++ * schedule too many processes too handle. Be aware of this limitation when ++ * designing to use notifications, and only add notifications for appropriate ++ * observable information. ++ * ++ * Also Notification callbacks are not synchronous. If you need to synchronize ++ * the behavior between module/observer you must use other means. And perhaps ++ * that will mean Notifications are not the proper solution. ++ */ ++ ++struct dwc_notifier; ++typedef struct dwc_notifier dwc_notifier_t; ++ ++/** The callback function must be of this type. ++ * ++ * @param object This is the object that is being observed. ++ * @param notification This is the notification that was triggered. ++ * @param observer This is the observer ++ * @param notification_data This is notification-specific data that the notifier ++ * has included in this notification. The value of this should be published in ++ * the documentation of the observable module with the notifications. ++ * @param user_data This is any custom data that the observer provided when ++ * adding itself as an observer to the notification. */ ++typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer, void *notification_data, void *user_data); ++ ++/** Brings up the notification manager. */ ++extern void dwc_alloc_notification_manager(void); ++/** Brings down the notification manager. */ ++extern void dwc_free_notification_manager(void); ++ ++/** This function register an observable module. A dwc_notifier_t object is ++ * returned to the observable module. This is an opaque object that is used by ++ * the observable module to trigger notifications. This object should only be ++ * accessible to functions that are authorized to trigger notifications for this ++ * module. Observers do not need this object. */ ++extern dwc_notifier_t *dwc_register_notifier(void *object); ++ ++/** This function unregister an observable module. All observers have to be ++ * removed prior to unregistration. */ ++extern void dwc_unregister_notifier(dwc_notifier_t *notifier); ++ ++/** Add a module as an observer to the observable module. The observable module ++ * needs to have previously registered with the notification manager. ++ * ++ * @param observer The observer module ++ * @param object The module to observe ++ * @param notification The notification to observe ++ * @param callback The callback function to call ++ * @param user_data Any additional user data to pass into the callback function */ ++extern int dwc_add_observer(void *observer, void *object, char *notification, dwc_notifier_callback_t callback, void *user_data); ++ ++/** Removes the specified observer from all notifications that it is currently ++ * observing. */ ++extern int dwc_remove_observer(void *observer); ++ ++/** This function triggers a Notification. It should be called by the ++ * observable module, or any module or library which the observable module ++ * allows to trigger notification on it's behalf. Such as the dwc_cc_t. ++ * ++ * dwc_notify is a non-blocking function. Callbacks are scheduled called in ++ * their own process context for each trigger. Callbacks can be blocking. ++ * dwc_notify can be called from interrupt context if needed. ++ * ++ */ ++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data); ++ ++#endif /* __DWC_NOTIFIER_H__ */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_os.h bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_os.h +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/dwc_os.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/dwc_os.h 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,925 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port/dwc_os.h $ ++ * $Revision: #2 $ ++ * $Date: 2009/04/02 $ ++ * $Change: 1224130 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_OS_H_ ++#define _DWC_OS_H_ ++ ++/** @file ++ * ++ * DWC portability library, low level os-wrapper functions ++ * ++ */ ++ ++/* These basic types need to be defined by some OS header file or custom header ++ * file for your specific target architecture. ++ * ++ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t ++ * ++ * Any custom or alternate header file must be added and enabled here. ++ */ ++ ++#ifdef DWC_LINUX ++# include ++# ifdef CONFIG_DEBUG_MUTEXES ++# include ++# endif ++#else ++# include ++#endif ++ ++ ++/** @name Primitive Types and Values */ ++ ++/** We define a boolean type for consistency. Can be either YES or NO */ ++typedef uint8_t dwc_bool_t; ++#define YES 1 ++#define NO 0 ++ ++/** @todo make them positive and return the negative error code */ ++/** @name Error Codes */ ++#define DWC_E_INVALID 1001 ++#define DWC_E_NO_MEMORY 1002 ++#define DWC_E_NO_DEVICE 1003 ++#define DWC_E_NOT_SUPPORTED 1004 ++#define DWC_E_TIMEOUT 1005 ++#define DWC_E_BUSY 1006 ++#define DWC_E_AGAIN 1007 ++#define DWC_E_RESTART 1008 ++#define DWC_E_ABORT 1009 ++#define DWC_E_SHUTDOWN 1010 ++#define DWC_E_NO_DATA 1011 ++#define DWC_E_DISCONNECT 2000 ++#define DWC_E_UNKNOWN 3000 ++#define DWC_E_NO_STREAM_RES 4001 ++#define DWC_E_COMMUNICATION 4002 ++#define DWC_E_OVERFLOW 4003 ++#define DWC_E_PROTOCOL 4004 ++#define DWC_E_IN_PROGRESS 4005 ++#define DWC_E_PIPE 4006 ++#define DWC_E_IO 4007 ++#define DWC_E_NO_SPACE 4008 ++ ++/** @name Tracing/Logging Functions ++ * ++ * These function provide the capability to add tracing, debugging, and error ++ * messages, as well exceptions as assertions. The WUDEV uses these ++ * extensively. These could be logged to the main console, the serial port, an ++ * internal buffer, etc. These functions could also be no-op if they are too ++ * expensive on your system. By default undefining the DEBUG macro already ++ * no-ops some of these functions. */ ++ ++#include ++ ++/** Returns non-zero if in interrupt context. */ ++extern dwc_bool_t DWC_IN_IRQ(void); ++#define dwc_in_irq DWC_IN_IRQ ++ ++/** Returns "IRQ" if DWC_IN_IRQ is true. */ ++static inline char *dwc_irq(void) { ++ return DWC_IN_IRQ() ? "IRQ" : ""; ++} ++ ++/** ++ * A vprintf() clone. Just call vprintf if you've got it. ++ */ ++extern void DWC_VPRINTF(char *format, va_list args); ++#define dwc_vprintf DWC_VPRINTF ++ ++/** ++ * A vsnprintf() clone. Just call vprintf if you've got it. ++ */ ++extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args); ++#define dwc_vsnprintf DWC_VSNPRINTF ++ ++/** ++ * printf() clone. Just call printf if you've go it. ++ */ ++extern void DWC_PRINTF(char *format, ...) ++/* This provides compiler level static checking of the parameters if you're ++ * using GCC. */ ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#define dwc_printf DWC_PRINTF ++ ++/** ++ * sprintf() clone. Just call sprintf if you've got it. ++ */ ++extern int DWC_SPRINTF(char *string, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 2, 3))); ++#else ++ ; ++#endif ++#define dwc_sprintf DWC_SPRINTF ++ ++/** ++ * snprintf() clone. Just call snprintf if you've got it. ++ */ ++extern int DWC_SNPRINTF(char *string, int size, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 3, 4))); ++#else ++ ; ++#endif ++#define dwc_snprintf DWC_SNPRINTF ++ ++/** ++ * Prints a WARNING message. On systems that don't differentiate between ++ * warnings and regular log messages, just print it. Indicates that something ++ * may be wrong with the driver. Works like printf(). ++ * ++ * Use the DWC_WARN macro to call this function. ++ */ ++extern void __DWC_WARN(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++ ++/** ++ * Prints an error message. On systems that don't differentiate between errors ++ * and regular log messages, just print it. Indicates that something went wrong ++ * with the driver, but it can be recovered from. Works like printf(). ++ * ++ * Use the DWC_ERROR macro to call this function. ++ */ ++extern void __DWC_ERROR(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++ ++/** ++ * Prints an exception error message and takes some user-defined action such as ++ * print out a backtrace or trigger a breakpoint. Indicates that something went ++ * abnormally wrong with the driver such as programmer error, or other ++ * exceptional condition. It should not be ignored so even on systems without ++ * printing capability, some action should be taken to notify the developer of ++ * it. Works like printf(). ++ */ ++extern void DWC_EXCEPTION(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#define dwc_exception DWC_EXCEPTION ++ ++#ifdef DEBUG ++/** ++ * Prints out a debug message. Used for logging/trace messages. ++ * ++ * Use the DWC_DEBUG macro to call this function ++ */ ++extern void __DWC_DEBUG(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#else ++#define __DWC_DEBUG printk ++#include ++#endif ++ ++/** ++ * Prints out a Debug message. ++ */ ++#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", __func__, dwc_irq(), ## _args) ++#define dwc_debug DWC_DEBUG ++/** ++ * Prints out an informative message. ++ */ ++#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", dwc_irq(), ## _args) ++#define dwc_info DWC_INFO ++/** ++ * Prints out a warning message. ++ */ ++#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_warn DWC_WARN ++/** ++ * Prints out an error message. ++ */ ++#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_error DWC_ERROR ++ ++#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_proto_error DWC_PROTO_ERROR ++ ++#ifdef DEBUG ++/** Prints out a exception error message if the _expr expression fails. Disabled ++ * if DEBUG is not enabled. */ ++#define DWC_ASSERT(_expr, _format, _args...) if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), __FILE__, __LINE__, ## _args); } ++#else ++#define DWC_ASSERT(_x...) ++#endif ++#define dwc_assert DWC_ASSERT ++ ++/** @name Byter Ordering ++ * The following functions are for conversions between processor's byte ordering ++ * and specific ordering you want. ++ */ ++ ++/** Converts 32 bit data in CPU byte ordering to little endian. */ ++extern uint32_t DWC_CPU_TO_LE32(void *p); ++#define dwc_cpu_to_le32 DWC_CPU_TO_LE32 ++/** Converts 32 bit data in CPU byte orderint to big endian. */ ++extern uint32_t DWC_CPU_TO_BE32(void *p); ++#define dwc_cpu_to_be32 DWC_CPU_TO_BE32 ++ ++/** Converts 32 bit little endian data to CPU byte ordering. */ ++extern uint32_t DWC_LE32_TO_CPU(void *p); ++#define dwc_le32_to_cpu DWC_LE32_TO_CPU ++/** Converts 32 bit big endian data to CPU byte ordering. */ ++extern uint32_t DWC_BE32_TO_CPU(void *p); ++#define dwc_be32_to_cpu DWC_BE32_TO_CPU ++ ++/** Converts 16 bit data in CPU byte ordering to little endian. */ ++extern uint16_t DWC_CPU_TO_LE16(void *p); ++#define dwc_cpu_to_le16 DWC_CPU_TO_LE16 ++/** Converts 16 bit data in CPU byte orderint to big endian. */ ++extern uint16_t DWC_CPU_TO_BE16(void *p); ++#define dwc_cpu_to_be16 DWC_CPU_TO_BE16 ++ ++/** Converts 16 bit little endian data to CPU byte ordering. */ ++extern uint16_t DWC_LE16_TO_CPU(void *p); ++#define dwc_le16_to_cpu DWC_LE16_TO_CPU ++/** Converts 16 bit bi endian data to CPU byte ordering. */ ++extern uint16_t DWC_BE16_TO_CPU(void *p); ++#define dwc_be16_to_cpu DWC_BE16_TO_CPU ++ ++/** @name Register Read/Write ++ * ++ * The following five functions should be implemented to read/write registers of ++ * 32-bit and 64-bit sizes. All modules use this to read/write register values. ++ * The reg value is a pointer to the register calculated from the void *base ++ * variable passed into the driver when it is started. */ ++ ++/** Reads the content of a 32-bit register. */ ++extern uint32_t DWC_READ_REG32(uint32_t volatile *reg); ++#define dwc_read_reg32 DWC_READ_REG32 ++/** Reads the content of a 64-bit register. */ ++extern uint64_t DWC_READ_REG64(uint64_t volatile *reg); ++#define dwc_read_reg64 DWC_READ_REG64 ++/** Writes to a 32-bit register. */ ++extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value); ++#define dwc_write_reg32 DWC_WRITE_REG32 ++/** Writes to a 64-bit register. */ ++extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value); ++#define dwc_write_reg64 DWC_WRITE_REG64 ++/** ++ * Modify bit values in a register. Using the ++ * algorithm: (reg_contents & ~clear_mask) | set_mask. ++ */ ++extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); ++#define dwc_modify_reg32 DWC_MODIFY_REG32 ++ ++/** @cond */ ++ ++/** @name Some convenience MACROS used internally. Define DEBUG_REGS to log the ++ * register writes. */ ++ ++#ifdef DEBUG_REGS ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ ++ return DWC_READ_REG32(&container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ ++ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, &(((uint32_t*)container->regs->_reg)[num]), data); \ ++ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(_container_type *container) { \ ++ return DWC_READ_REG32(&container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ ++ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ ++ DWC_WRITE_REG32(&container->regs->_reg, data); \ ++} ++ ++#else ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ ++ return DWC_READ_REG32(&container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ ++ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(_container_type *container) { \ ++ return DWC_READ_REG32(&container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ ++ DWC_WRITE_REG32(&container->regs->_reg, data); \ ++} ++ ++#endif ++ ++/** @endcond */ ++ ++ ++/** @name Crypto Functions ++ * ++ * These are the low-level cryptographic functions used by the driver. */ ++ ++/** Perform AES CBC */ ++extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out); ++#define dwc_aes_cbc DWC_AES_CBC ++/** Fill the provided buffer with random bytes. These should be cryptographic grade random numbers. */ ++extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length); ++#define dwc_random_bytes DWC_RANDOM_BYTES ++/** Perform the SHA-256 hash function */ ++extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out); ++#define dwc_sha256 DWC_SHA256 ++/** Calculated the HMAC-SHA256 */ ++extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out); ++#define dwc_hmac_sha256 DWC_HMAC_SHA256 ++ ++ ++/** @name Memory Allocation ++ * ++ * These function provide access to memory allocation. There are only 2 DMA ++ * functions and 3 Regular memory functions that need to be implemented. None ++ * of the memory debugging routines need to be implemented. The allocation ++ * routines all ZERO the contents of the memory. ++ * ++ * Defining DEBUG_MEMORY turns on memory debugging and statistic gathering. ++ * This checks for memory leaks, keeping track of alloc/free pairs. It also ++ * keeps track of how much memory the driver is using at any given time. */ ++ ++#define DWC_PAGE_SIZE 4096 ++#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff) ++#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0) ++ ++#define DWC_INVALID_DMA_ADDR 0x0 ++ ++typedef uint32_t dwc_dma_t; ++ ++/** @todo these functions will be added in the future */ ++#if 0 ++/** ++ * Creates a DMA pool from which you can allocate DMA buffers. Buffers ++ * allocated from this pool will be guaranteed to meet the size, alignment, and ++ * boundary requirements specified. ++ * ++ * @param[in] size Specifies the size of the buffers that will be allocated from ++ * this pool. ++ * @param[in] align Specifies the byte alignment requirements of the buffers ++ * allocated from this pool. Must be a power of 2. ++ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from ++ * this pool must not cross. ++ * ++ * @returns A pointer to an internal opaque structure which is not to be ++ * accessed outside of these library functions. Use this handle to specify ++ * which pools to allocate/free DMA buffers from and also to destroy the pool, ++ * when you are done with it. ++ */ ++extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary); ++/** ++ * Destroy a DMA pool. All buffers allocated from that pool must be freed first. ++ */ ++extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool); ++/** ++ * Allocate a buffer from the specified DMA pool and zeros its contents. ++ */ ++extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr); ++/** ++ * Free a previously allocated buffer from the DMA pool. ++ */ ++extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr); ++#endif ++ ++ ++/** Allocates a DMA capable buffer and zeroes its contents. */ ++extern void *__DWC_DMA_ALLOC(uint32_t size, dwc_dma_t *dma_addr); ++ ++/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */ ++extern void *__DWC_DMA_ALLOC_ATOMIC(uint32_t size, dwc_dma_t *dma_addr); ++ ++/** Frees a previosly allocated buffer. */ ++extern void __DWC_DMA_FREE(uint32_t size, void *virt_addr, dwc_dma_t dma_addr); ++ ++/** Allocates a block of memory and zeroes its contents. */ ++extern void *__DWC_ALLOC(uint32_t size); ++ ++/** Allocates a block of memory and zeroes its contents, in an atomic manner ++ * which can be used inside interrupt context. The size should be sufficiently ++ * small, a few KB at most, such that failures are not likely to occur. Can just call ++ * __DWC_ALLOC if it is atomic. */ ++extern void *__DWC_ALLOC_ATOMIC(uint32_t size); ++ ++/** Frees a previously allocated buffer. */ ++extern void __DWC_FREE(void *addr); ++ ++#ifndef DEBUG_MEMORY ++ ++#define DWC_ALLOC(_size_) __DWC_ALLOC(_size_) ++#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(_size_) ++#define DWC_FREE(_addr_) __DWC_FREE(_addr_) ++#define DWC_DMA_ALLOC(_size_,_dma_) __DWC_DMA_ALLOC(_size_,_dma_) ++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) __DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) ++#define DWC_DMA_FREE(_size_,_virt_,_dma_) __DWC_DMA_FREE(_size_,_virt_,_dma_) ++ ++#else ++ ++extern void *dwc_alloc_debug(uint32_t size, char const *func, int line); ++extern void *dwc_alloc_atomic_debug(uint32_t size, char const *func, int line); ++extern void dwc_free_debug(void *addr, char const *func, int line); ++extern void *dwc_dma_alloc_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line); ++extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line); ++extern void dwc_dma_free_debug(uint32_t size, void *virt_addr, dwc_dma_t dma_addr, char const *func, int line); ++ ++extern void dwc_memory_debug_start(void); ++extern void dwc_memory_debug_stop(void); ++extern void dwc_memory_debug_report(void); ++ ++#define DWC_ALLOC(_size_) (dwc_alloc_debug(_size_, __func__, __LINE__)) ++#define DWC_ALLOC_ATOMIC(_size_) (dwc_alloc_atomic_debug(_size_, __func__, __LINE__)) ++#define DWC_FREE(_addr_) (dwc_free_debug(_addr_, __func__, __LINE__)) ++#define DWC_DMA_ALLOC(_size_,_dma_) dwc_dma_alloc_debug(_size_, _dma_, __func__, __LINE__) ++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) dwc_dma_alloc_atomic_debug(_size_, _dma_, __func__, __LINE__) ++#define DWC_DMA_FREE(_size_,_virt_,_dma_) dwc_dma_free_debug(_size_, _virt_, _dma_, __func__, __LINE__) ++ ++#endif /* DEBUG_MEMORY */ ++ ++#define dwc_alloc DWC_ALLOC ++#define dwc_alloc_atomic DWC_ALLOC_ATOMIC ++#define dwc_free DWC_FREE ++#define dwc_dma_alloc DWC_DMA_ALLOC ++#define dwc_dma_alloc_atomic DWC_DMA_ALLOC_ATOMIC ++#define dwc_dma_free DWC_DMA_FREE ++ ++ ++/** @name Memory and String Processing */ ++ ++/** memset() clone */ ++extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size); ++#define dwc_memset DWC_MEMSET ++/** memcpy() clone */ ++extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size); ++#define dwc_memcpy DWC_MEMCPY ++/** memmove() clone */ ++extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size); ++#define dwc_memmove DWC_MEMMOVE ++/** memcmp() clone */ ++extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size); ++#define dwc_memcmp DWC_MEMCMP ++/** strcmp() clone */ ++extern int DWC_STRCMP(void *s1, void *s2); ++#define dwc_strcmp DWC_STRCMP ++/** strncmp() clone */ ++extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size); ++#define dwc_strncmp DWC_STRNCMP ++/** strlen() clone, for NULL terminated ASCII strings */ ++extern int DWC_STRLEN(char const *str); ++#define dwc_strlen DWC_STRLEN ++/** strcpy() clone, for NULL terminated ASCII strings */ ++extern char *DWC_STRCPY(char *to, const char *from); ++#define dwc_strcpy DWC_STRCPY ++ ++/** strdup() clone. If you wish to use memory allocation debugging, this ++ * implementation of strdup should use the DWC_* memory routines instead of ++ * calling a predefined strdup. Otherwise the memory allocated by this routine ++ * will not be seen by the debugging routines. */ ++extern char *DWC_STRDUP(char const *str); ++#define dwc_strdup DWC_STRDUP ++ ++/** NOT an atoi() clone. Read the description carefully. Returns an integer ++ * converted from the string str in base 10 unless the string begins with a "0x" ++ * in which case it is base 16. String must be a NULL terminated sequence of ++ * ASCII characters and may optionally begin with whitespace, a + or -, and a ++ * "0x" prefix if base 16. The remaining characters must be valid digits for ++ * the number and end with a NULL character. If any invalid characters are ++ * encountered or it returns with a negative error code and the results of the ++ * conversion are undefined. On sucess it returns 0. Overflow conditions are ++ * undefined. An example implementation using atoi() can be referenced from the ++ * Linux implementation. */ ++extern int DWC_ATOI(char *str, int32_t *value); ++#define dwc_atoi DWC_ATOI ++/** Same as above but for unsigned. */ ++extern int DWC_ATOUI(char *str, uint32_t *value); ++#define dwc_atoui DWC_ATOUI ++/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */ ++extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len); ++#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE ++ ++/** @name Wait queues ++ * ++ * Wait queues provide a means of synchronizing between threads or processes. A ++ * process can block on a waitq if some condition is not true, waiting for it to ++ * become true. When the waitq is triggered all waiting process will get ++ * unblocked and the condition will be check again. Waitqs should be triggered ++ * every time a condition can potentially change.*/ ++struct dwc_waitq; ++typedef struct dwc_waitq dwc_waitq_t; ++ ++/** The type of waitq condition callback function. This is called every time ++ * condition is evaluated. */ ++typedef int (*dwc_waitq_condition_t)(void *data); ++ ++/** Allocate a waitq */ ++extern dwc_waitq_t *DWC_WAITQ_ALLOC(void); ++#define dwc_waitq_alloc DWC_WAITQ_ALLOC ++/** Free a waitq */ ++extern void DWC_WAITQ_FREE(dwc_waitq_t *wq); ++#define dwc_waitq_free DWC_WAITQ_FREE ++ ++/** Check the condition and if it is false, block on the waitq. When unblocked, check the ++ * condition again. The function returns when the condition becomes true. The return value ++ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */ ++extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t condition, void *data); ++#define dwc_waitq_wait DWC_WAITQ_WAIT; ++/** Check the condition and if it is false, block on the waitq. When unblocked, ++ * check the condition again. The function returns when the condition become ++ * true or the timeout has passed. The return value is 0 on condition true or ++ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on ++ * error. */ ++extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t condition, void *data, int32_t msecs); ++#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT ++/** Trigger a waitq, unblocking all processes. This should be called whenever a condition ++ * has potentially changed. */ ++extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq); ++#define dwc_waitq_trigger DWC_WAITQ_TRIGGER ++/** Unblock all processes waiting on the waitq with an ABORTED result. */ ++extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq); ++#define dwc_waitq_abort DWC_WAITQ_ABORT ++ ++/** @name Threads ++ * ++ * A thread must be explicitly stopped. It must check DWC_THREAD_SHOULD_STOP ++ * whenever it is woken up, and then return. The DWC_THREAD_STOP function ++ * returns the value from the thread. ++ */ ++ ++struct dwc_thread; ++typedef struct dwc_thread dwc_thread_t; ++ ++/** The thread function */ ++typedef int (*dwc_thread_function_t)(void *data); ++ ++/** Create a thread and start it running the thread_function. Returns a handle ++ * to the thread */ ++extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t thread_function, char *name, void *data); ++#define dwc_thread_run DWC_THREAD_RUN ++/** Stops a thread. Return the value returned by the thread. Or will return ++ * DWC_ABORT if the thread never started. */ ++extern int DWC_THREAD_STOP(dwc_thread_t *thread); ++#define dwc_thread_stop DWC_THREAD_STOP ++/** Signifies to the thread that it must stop. */ ++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void); ++#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP ++ ++/** @name Work queues ++ * ++ * Workqs are used to queue a callback function to be called at some later time, ++ * in another thread. */ ++struct dwc_workq; ++typedef struct dwc_workq dwc_workq_t; ++ ++/** The type of the callback function to be called. */ ++typedef void (*dwc_work_callback_t)(void *data); ++ ++/** Allocate a workq */ ++extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name); ++#define dwc_workq_alloc DWC_WORKQ_ALLOC ++/** Free a workq. All work must be completed before being freed. */ ++extern void DWC_WORKQ_FREE(dwc_workq_t *workq); ++#define dwc_workq_free DWC_WORKQ_FREE ++/** Schedule a callback on the workq, passing in data. The function will be ++ * scheduled at some later time. */ ++extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t work_cb, void *data, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 4, 5))); ++#else ++ ; ++#endif ++#define dwc_workq_schedule DWC_WORKQ_SCHEDULE ++ ++/** Schedule a callback on the workq, that will be called until at least ++ * given number miliseconds have passed. */ ++extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t work_cb, void *data, uint32_t time, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 5, 6))); ++#else ++ ; ++#endif ++#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED ++ ++/** The number of processes in the workq */ ++extern int DWC_WORKQ_PENDING(dwc_workq_t *workq); ++#define dwc_workq_pending DWC_WORKQ_PENDING ++/** Blocks until all the work in the workq is complete or timed out. Returns < ++ * 0 on timeout. */ ++extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout); ++#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE ++ ++ ++/** @name Tasklets ++ * ++ */ ++struct dwc_tasklet; ++typedef struct dwc_tasklet dwc_tasklet_t; ++ ++typedef void (*dwc_tasklet_callback_t)(void *data); ++ ++extern dwc_tasklet_t *DWC_TASK_ALLOC(dwc_tasklet_callback_t cb, void *data); ++#define dwc_task_alloc DWC_TASK_ALLOC ++extern void DWC_TASK_FREE(dwc_tasklet_t *t); ++#define dwc_task_free DWC_TASK_FREE ++extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task); ++#define dwc_task_schedule DWC_TASK_SCHEDULE ++ ++ ++/** @name Timer ++ * ++ * Callbacks must be small and atomic. ++ */ ++struct dwc_timer; ++typedef struct dwc_timer dwc_timer_t; ++ ++typedef void (*dwc_timer_callback_t)(void *data); ++ ++extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data); ++#define dwc_timer_alloc DWC_TIMER_ALLOC ++extern void DWC_TIMER_FREE(dwc_timer_t *timer); ++#define dwc_timer_free DWC_TIMER_FREE ++ ++/** Schedules the timer to run at time ms from now. And will repeat at every ++ * repeat_interval msec therafter ++ * ++ * Modifies a timer that is still awaiting execution to a new expiration time. ++ * The mod_time is added to the old time. */ ++extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time); ++#define dwc_timer_schedule DWC_TIMER_SCHEDULE ++ ++/** Disables the timer from execution. */ ++extern void DWC_TIMER_CANCEL(dwc_timer_t *timer); ++#define dwc_timer_cancel DWC_TIMER_CANCEL ++ ++ ++ ++/** @name Spinlocks ++ * ++ * These locks are used when the work between the lock/unlock is atomic and ++ * short. Interrupts are also disabled during the lock/unlock and thus they are ++ * suitable to lock between interrupt/non-interrupt context. They also lock ++ * between processes if you have multiple CPUs or Preemption. If you don't have ++ * multiple CPUS or Preemption, then the you can simply implement the ++ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts. Because ++ * the work between the lock/unlock is atomic, the process context will never ++ * change, and so you never have to lock between processes. */ ++ ++struct dwc_spinlock; ++typedef struct dwc_spinlock dwc_spinlock_t; ++ ++/** Returns an initialized lock variable. This function should allocate and ++ * initialize the OS-specific data structure used for locking. This data ++ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should ++ * be freed by the DWC_FREE_LOCK when it is no longer used. */ ++extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void); ++#define dwc_spinlock_alloc DWC_SPINLOCK_ALLOC ++ ++/** Frees an initialized lock variable. */ ++extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock); ++#define dwc_spinlock_free DWC_SPINLOCK_FREE ++ ++/** Disables interrupts and blocks until it acquires the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ * @param flags Unsigned long for irq flags storage. ++ */ ++extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, uint64_t *flags); ++#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE ++ ++/** Re-enables the interrupt and releases the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ * @param flags Unsigned long for irq flags storage. Must be the same as was ++ * passed into DWC_LOCK. ++ */ ++extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, uint64_t flags); ++#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE ++ ++/** Blocks until it acquires the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++extern void DWC_SPINLOCK(dwc_spinlock_t *lock); ++#define dwc_spinlock DWC_SPINLOCK ++ ++/** Releases the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock); ++#define dwc_spinunlock DWC_SPINUNLOCK ++ ++/** @name Mutexes ++ * ++ * Unlike spinlocks Mutexes lock only between processes and the work between the ++ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context. ++ */ ++ ++struct dwc_mutex; ++typedef struct dwc_mutex dwc_mutex_t; ++ ++ ++/* For Linux Mutex Debugging make it inline because the debugging routines use ++ * the symbol to determine recursive locking. This makes it falsely think ++ * recursive locking occurs. */ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \ ++ __mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \ ++ mutex_init((struct mutex *)__mutexp); \ ++}) ++#endif ++extern dwc_mutex_t *DWC_MUTEX_ALLOC(void); ++#define dwc_mutex_alloc DWC_MUTEX_ALLOC ++ ++/* For memory leak debugging when using Linux Mutex Debugging */ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#define DWC_MUTEX_FREE(__mutexp) do { \ ++ mutex_destroy((struct mutex *)__mutexp); \ ++ DWC_FREE(__mutexp); \ ++} while(0) ++#else ++extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex); ++#define dwc_mutex_free DWC_MUTEX_FREE ++#endif ++ ++extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_lock DWC_MUTEX_LOCK ++/** Non-blocking lock returns 1 on successful lock. */ ++extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK ++extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_unlock DWC_MUTEX_UNLOCK ++ ++ ++ ++ ++/** @name Time */ ++ ++/** Microsecond delay. ++ * ++ * @param usecs Microseconds to delay. ++ */ ++extern void DWC_UDELAY(uint32_t usecs); ++#define dwc_udelay DWC_UDELAY ++ ++/** Millisecond delay. ++ * ++ * @param msecs Milliseconds to delay. ++ */ ++extern void DWC_MDELAY(uint32_t msecs); ++#define dwc_mdelay DWC_MDELAY ++ ++/** Non-busy waiting. ++ * Sleeps for specified number of milliseconds. ++ * ++ * @param msecs Milliseconds to sleep. ++ */ ++extern void DWC_MSLEEP(uint32_t msecs); ++#define dwc_msleep DWC_MSLEEP ++ ++extern uint32_t DWC_TIME(void); ++#define dwc_time DWC_TIME ++ ++#endif // _DWC_OS_H_ ++ ++ ++ ++ ++/** @mainpage DWC Portability and Common Library ++ * ++ * This is the documentation for the DWC Portability and Common Library. ++ * ++ * @section intro Introduction ++ * ++ * The DWC Portability library consists of wrapper calls and data structures to ++ * all low-level functions which are typically provided by the OS. The WUDEV ++ * driver uses only these functions. In order to port the WUDEV driver, only ++ * the functions in this library need to be re-implemented, with the same ++ * behavior as documented here. ++ * ++ * The Common library consists of higher level functions, which rely only on ++ * calling the functions from the DWC Portability library. These common ++ * routines are shared across modules. Some of the common libraries need to be ++ * used directly by the driver programmer when porting WUDEV. Such as the ++ * parameter and notification libraries. ++ * ++ * @section low Portability Library OS Wrapper Functions ++ * ++ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that ++ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC(). All of ++ * these functions are included in the dwc_os.h file. ++ * ++ * There are many functions here covering a wide array of OS services. Please ++ * see dwc_os.h for details, and implementation notes for each function. ++ * ++ * @section common Common Library Functions ++ * ++ * Any function starting with dwc and in all lowercase is a common library ++ * routine. These functions have a portable implementation and do not need to ++ * be reimplemented when porting. The common routines can be used by any ++ * driver, and some must be used by the end user to control the drivers. For ++ * example, you must use the Parameter common library in order to set the ++ * parameters in the WUDEV module. ++ * ++ * The common libraries consist of the following: ++ * ++ * - Connection Contexts - Used internally and can be used by end-user. See dwc_cc.h ++ * - Parameters - Used internally and can be used by end-user. See dwc_params.h ++ * - Notifications - Used internally and can be used by end-user. See dwc_notifier.h ++ * - Lists - Used internally and can be used by end-user. See dwc_list.h ++ * - Memory Debugging - Used internally and can be used by end-user. See dwc_os.h ++ * - Modpow - Used internally only. See dwc_modpow.h ++ * - DH - Used internally only. See dwc_dh.h ++ * - Crypto - Used internally only. See dwc_crypto.h ++ * ++ * ++ * @section prereq Prerequistes For dwc_os.h ++ * @subsection types Data Types ++ * ++ * The dwc_os.h file assumes that several low-level data types are pre defined for the ++ * compilation environment. These data types are: ++ * ++ * - uint8_t - unsigned 8-bit data type ++ * - int8_t - signed 8-bit data type ++ * - uint16_t - unsigned 16-bit data type ++ * - int16_t - signed 16-bit data type ++ * - uint32_t - unsigned 32-bit data type ++ * - int32_t - signed 32-bit data type ++ * - uint64_t - unsigned 64-bit data type ++ * - int64_t - signed 64-bit data type ++ * ++ * Ensure that these are defined before using dwc_os.h. The easiest way to do ++ * that is to modify the top of the file to include the appropriate header. ++ * This is already done for the Linux environment. If the DWC_LINUX macro is ++ * defined, the correct header will be added. A standard header is ++ * also used for environments where standard C headers are available. ++ * ++ * @subsection stdarg Variable Arguments ++ * ++ * Variable arguments are provided by a standard C header . it is ++ * available in Both the Linux and ANSI C enviornment. An equivalent must be ++ * provided in your enviornment in order to use dwc_os.h with the debug and ++ * tracing message functionality. ++ * ++ * @subsection thread Threading ++ * ++ * WUDEV Core must be run on an operating system that provides for multiple ++ * threads/processes. Threading can be implemented in many ways, even in ++ * embedded systems without an operating system. At the bare minimum, the ++ * system should be able to start any number of processes at any time to handle ++ * special work. It need not be a pre-emptive system. Process context can ++ * change upon a call to a blocking function. The hardware interrupt context ++ * that calls the module's ISR() function must be differentiable from process ++ * context, even if your processes are impemented via a hardware interrupt. ++ * Further locking mechanism between process must exist (or be implemented), and ++ * process context must have a way to disable interrupts for a period of time to ++ * lock them out. If all of this exists, the functions in dwc_os.h related to ++ * threading should be able to be implemented with the defined behavior. ++ * ++ */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/Makefile bootc-3.2.21/drivers/usb/host/dwc_common_port/Makefile +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/Makefile 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,46 @@ ++# ++# Makefile for DWC_common library ++# ++ ++ifneq ($(KERNELRELEASE),) ++ ++#CPPFLAGS += -DDEBUG_MEMORY ++ ++ifeq ($(CONFIG_USB_DEBUG),y) ++CPPFLAGS += -DDEBUG ++endif ++CPPFLAGS += -DDWC_LINUX ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_common_port_lib.o ++dwc_common_port_lib-objs := dwc_cc.o \ ++ dwc_notifier.o \ ++ dwc_common_linux.o dwc_mem.o ++ ++kernrelwd := $(subst ., ,$(KERNELRELEASE)) ++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) ++ ++ifneq ($(kernrel3),2.6.20) ++# grayg - I only know that we use EXTRA_CFLAGS in 2.6.31 actually ++EXTRA_CFLAGS += $(CPPFLAGS) ++endif ++ ++else ++ ++ifeq ($(DOXYGEN),) ++DOXYGEN := $(DOXYGEN) ++endif ++ ++default: ++ $(MAKE) -C$(KDIR) M=$(PWD) modules ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++endif ++ ++clean: ++ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers ++ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/Makefile.linux bootc-3.2.21/drivers/usb/host/dwc_common_port/Makefile.linux +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/Makefile.linux 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/Makefile.linux 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,36 @@ ++# ++# Makefile for DWC_common library ++# ++ifneq ($(KERNELRELEASE),) ++ ++#CPPFLAGS += -DDEBUG_MEMORY ++ ++#CPPFLAGS += -DDEBUG ++CPPFLAGS += -DDWC_LINUX ++ ++obj-m := dwc_common_port_lib.o ++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ ++ dwc_crypto.o dwc_notifier.o \ ++ dwc_common_linux.o dwc_mem.o ++ ++else ++ ++ ++ifeq ($(DOXYGEN),) ++DOXYGEN := $(DOXYGEN) ++endif ++ ++default: ++ $(MAKE) -C$(KDIR) M=$(PWD) modules ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++endif ++ ++clean: ++ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers ++ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_common_port/usb.h bootc-3.2.21/drivers/usb/host/dwc_common_port/usb.h +--- upstream-3.2.21/drivers/usb/host/dwc_common_port/usb.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_common_port/usb.h 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,850 @@ ++/* ++ * Copyright (c) 1998 The NetBSD Foundation, Inc. ++ * All rights reserved. ++ * ++ * This code is derived from software contributed to The NetBSD Foundation ++ * by Lennart Augustsson (lennart@augustsson.net) at ++ * Carlstedt Research & Technology. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. All advertising materials mentioning features or use of this software ++ * must display the following acknowledgement: ++ * This product includes software developed by the NetBSD ++ * Foundation, Inc. and its contributors. ++ * 4. Neither the name of The NetBSD Foundation nor the names of its ++ * contributors may be used to endorse or promote products derived ++ * from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS ++ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ++ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS ++ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++/* Modified by Synopsys, Inc, 12/12/2007 */ ++ ++ ++#ifndef _USB_H_ ++#define _USB_H_ ++ ++#include "dwc_os.h" ++ ++/* ++ * The USB records contain some unaligned little-endian word ++ * components. The U[SG]ETW macros take care of both the alignment ++ * and endian problem and should always be used to access non-byte ++ * values. ++ */ ++typedef u_int8_t uByte; ++typedef u_int8_t uWord[2]; ++typedef u_int8_t uDWord[4]; ++ ++#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h)) ++ ++#if 1 ++#define UGETW(w) ((w)[0] | ((w)[1] << 8)) ++#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8)) ++#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24)) ++#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \ ++ (w)[1] = (u_int8_t)((v) >> 8), \ ++ (w)[2] = (u_int8_t)((v) >> 16), \ ++ (w)[3] = (u_int8_t)((v) >> 24)) ++#else ++/* ++ * On little-endian machines that can handle unanliged accesses ++ * (e.g. i386) these macros can be replaced by the following. ++ */ ++#define UGETW(w) (*(u_int16_t *)(w)) ++#define USETW(w,v) (*(u_int16_t *)(w) = (v)) ++#define UGETDW(w) (*(u_int32_t *)(w)) ++#define USETDW(w,v) (*(u_int32_t *)(w) = (v)) ++#endif ++ ++#define UPACKED __attribute__((__packed__)) ++ ++typedef struct { ++ uByte bmRequestType; ++ uByte bRequest; ++ uWord wValue; ++ uWord wIndex; ++ uWord wLength; ++} UPACKED usb_device_request_t; ++ ++#define UT_GET_DIR(a) ((a) & 0x80) ++#define UT_WRITE 0x00 ++#define UT_READ 0x80 ++ ++#define UT_GET_TYPE(a) ((a) & 0x60) ++#define UT_STANDARD 0x00 ++#define UT_CLASS 0x20 ++#define UT_VENDOR 0x40 ++ ++#define UT_GET_RECIPIENT(a) ((a) & 0x1f) ++#define UT_DEVICE 0x00 ++#define UT_INTERFACE 0x01 ++#define UT_ENDPOINT 0x02 ++#define UT_OTHER 0x03 ++ ++#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE) ++#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE) ++#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT) ++#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE) ++#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE) ++#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT) ++#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE) ++#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE) ++#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER) ++#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT) ++#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE) ++#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE) ++#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER) ++#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT) ++#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE) ++#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE) ++#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER) ++#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT) ++#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE) ++#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE) ++#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER) ++#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT) ++ ++/* Requests */ ++#define UR_GET_STATUS 0x00 ++#define USTAT_STANDARD_STATUS 0x00 ++#define WUSTAT_WUSB_FEATURE 0x01 ++#define WUSTAT_CHANNEL_INFO 0x02 ++#define WUSTAT_RECEIVED_DATA 0x03 ++#define WUSTAT_MAS_AVAILABILITY 0x04 ++#define WUSTAT_CURRENT_TRANSMIT_POWER 0x05 ++#define UR_CLEAR_FEATURE 0x01 ++#define UR_SET_FEATURE 0x03 ++#define UR_SET_AND_TEST_FEATURE 0x0c ++#define UR_SET_ADDRESS 0x05 ++#define UR_GET_DESCRIPTOR 0x06 ++#define UDESC_DEVICE 0x01 ++#define UDESC_CONFIG 0x02 ++#define UDESC_STRING 0x03 ++#define UDESC_INTERFACE 0x04 ++#define UDESC_ENDPOINT 0x05 ++#define UDESC_DEVICE_QUALIFIER 0x06 ++#define UDESC_OTHER_SPEED_CONFIGURATION 0x07 ++#define UDESC_INTERFACE_POWER 0x08 ++#define UDESC_OTG 0x09 ++#define WUDESC_SECURITY 0x0c ++#define WUDESC_KEY 0x0d ++#define WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf) ++#define WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4) ++#define WUD_KEY_TYPE_ASSOC 0x01 ++#define WUD_KEY_TYPE_GTK 0x02 ++#define WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6) ++#define WUD_KEY_ORIGIN_HOST 0x00 ++#define WUD_KEY_ORIGIN_DEVICE 0x01 ++#define WUDESC_ENCRYPTION_TYPE 0x0e ++#define WUDESC_BOS 0x0f ++#define WUDESC_DEVICE_CAPABILITY 0x10 ++#define WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11 ++#define UDESC_CS_DEVICE 0x21 /* class specific */ ++#define UDESC_CS_CONFIG 0x22 ++#define UDESC_CS_STRING 0x23 ++#define UDESC_CS_INTERFACE 0x24 ++#define UDESC_CS_ENDPOINT 0x25 ++#define UDESC_HUB 0x29 ++#define UR_SET_DESCRIPTOR 0x07 ++#define UR_GET_CONFIG 0x08 ++#define UR_SET_CONFIG 0x09 ++#define UR_GET_INTERFACE 0x0a ++#define UR_SET_INTERFACE 0x0b ++#define UR_SYNCH_FRAME 0x0c ++#define WUR_SET_ENCRYPTION 0x0d ++#define WUR_GET_ENCRYPTION 0x0e ++#define WUR_SET_HANDSHAKE 0x0f ++#define WUR_GET_HANDSHAKE 0x10 ++#define WUR_SET_CONNECTION 0x11 ++#define WUR_SET_SECURITY_DATA 0x12 ++#define WUR_GET_SECURITY_DATA 0x13 ++#define WUR_SET_WUSB_DATA 0x14 ++#define WUDATA_DRPIE_INFO 0x01 ++#define WUDATA_TRANSMIT_DATA 0x02 ++#define WUDATA_TRANSMIT_PARAMS 0x03 ++#define WUDATA_RECEIVE_PARAMS 0x04 ++#define WUDATA_TRANSMIT_POWER 0x05 ++#define WUR_LOOPBACK_DATA_WRITE 0x15 ++#define WUR_LOOPBACK_DATA_READ 0x16 ++#define WUR_SET_INTERFACE_DS 0x17 ++ ++/* Feature numbers */ ++#define UF_ENDPOINT_HALT 0 ++#define UF_DEVICE_REMOTE_WAKEUP 1 ++#define UF_TEST_MODE 2 ++#define UF_DEVICE_B_HNP_ENABLE 3 ++#define UF_DEVICE_A_HNP_SUPPORT 4 ++#define UF_DEVICE_A_ALT_HNP_SUPPORT 5 ++#define WUF_WUSB 3 ++#define WUF_TX_DRPIE 0x0 ++#define WUF_DEV_XMIT_PACKET 0x1 ++#define WUF_COUNT_PACKETS 0x2 ++#define WUF_CAPTURE_PACKETS 0x3 ++ ++/* Class requests from the USB 2.0 hub spec, table 11-15 */ ++#define UCR_CLEAR_HUB_FEATURE (0x2000 | UR_CLEAR_FEATURE) ++#define UCR_CLEAR_PORT_FEATURE (0x2300 | UR_CLEAR_FEATURE) ++#define UCR_GET_HUB_DESCRIPTOR (0xa000 | UR_GET_DESCRIPTOR) ++#define UCR_GET_HUB_STATUS (0xa000 | UR_GET_STATUS) ++#define UCR_GET_PORT_STATUS (0xa300 | UR_GET_STATUS) ++#define UCR_SET_HUB_FEATURE (0x2000 | UR_SET_FEATURE) ++#define UCR_SET_PORT_FEATURE (0x2300 | UR_SET_FEATURE) ++#define UCR_SET_AND_TEST_PORT_FEATURE (0xa300 | UR_SET_AND_TEST_FEATURE) ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDescriptorSubtype; ++} UPACKED usb_descriptor_t; ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bcdUSB; ++#define UD_USB_2_0 0x0200 ++#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0) ++ uByte bDeviceClass; ++ uByte bDeviceSubClass; ++ uByte bDeviceProtocol; ++ uByte bMaxPacketSize; ++ /* The fields below are not part of the initial descriptor. */ ++ uWord idVendor; ++ uWord idProduct; ++ uWord bcdDevice; ++ uByte iManufacturer; ++ uByte iProduct; ++ uByte iSerialNumber; ++ uByte bNumConfigurations; ++} UPACKED usb_device_descriptor_t; ++#define USB_DEVICE_DESCRIPTOR_SIZE 18 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumInterface; ++ uByte bConfigurationValue; ++ uByte iConfiguration; ++ uByte bmAttributes; ++#define UC_BUS_POWERED 0x80 ++#define UC_SELF_POWERED 0x40 ++#define UC_REMOTE_WAKEUP 0x20 ++ uByte bMaxPower; /* max current in 2 mA units */ ++#define UC_POWER_FACTOR 2 ++} UPACKED usb_config_descriptor_t; ++#define USB_CONFIG_DESCRIPTOR_SIZE 9 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bInterfaceNumber; ++ uByte bAlternateSetting; ++ uByte bNumEndpoints; ++ uByte bInterfaceClass; ++ uByte bInterfaceSubClass; ++ uByte bInterfaceProtocol; ++ uByte iInterface; ++} UPACKED usb_interface_descriptor_t; ++#define USB_INTERFACE_DESCRIPTOR_SIZE 9 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bEndpointAddress; ++#define UE_GET_DIR(a) ((a) & 0x80) ++#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7)) ++#define UE_DIR_IN 0x80 ++#define UE_DIR_OUT 0x00 ++#define UE_ADDR 0x0f ++#define UE_GET_ADDR(a) ((a) & UE_ADDR) ++ uByte bmAttributes; ++#define UE_XFERTYPE 0x03 ++#define UE_CONTROL 0x00 ++#define UE_ISOCHRONOUS 0x01 ++#define UE_BULK 0x02 ++#define UE_INTERRUPT 0x03 ++#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE) ++#define UE_ISO_TYPE 0x0c ++#define UE_ISO_ASYNC 0x04 ++#define UE_ISO_ADAPT 0x08 ++#define UE_ISO_SYNC 0x0c ++#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE) ++ uWord wMaxPacketSize; ++ uByte bInterval; ++} UPACKED usb_endpoint_descriptor_t; ++#define USB_ENDPOINT_DESCRIPTOR_SIZE 7 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bString[127]; ++} UPACKED usb_string_descriptor_t; ++#define USB_MAX_STRING_LEN 128 ++#define USB_LANGUAGE_TABLE 0 /* # of the string language id table */ ++ ++/* Hub specific request */ ++#define UR_GET_BUS_STATE 0x02 ++#define UR_CLEAR_TT_BUFFER 0x08 ++#define UR_RESET_TT 0x09 ++#define UR_GET_TT_STATE 0x0a ++#define UR_STOP_TT 0x0b ++ ++/* Hub features */ ++#define UHF_C_HUB_LOCAL_POWER 0 ++#define UHF_C_HUB_OVER_CURRENT 1 ++#define UHF_PORT_CONNECTION 0 ++#define UHF_PORT_ENABLE 1 ++#define UHF_PORT_SUSPEND 2 ++#define UHF_PORT_OVER_CURRENT 3 ++#define UHF_PORT_RESET 4 ++#define UHF_PORT_L1 5 ++#define UHF_PORT_POWER 8 ++#define UHF_PORT_LOW_SPEED 9 ++#define UHF_PORT_HIGH_SPEED 10 ++#define UHF_C_PORT_CONNECTION 16 ++#define UHF_C_PORT_ENABLE 17 ++#define UHF_C_PORT_SUSPEND 18 ++#define UHF_C_PORT_OVER_CURRENT 19 ++#define UHF_C_PORT_RESET 20 ++#define UHF_C_PORT_L1 23 ++#define UHF_PORT_TEST 21 ++#define UHF_PORT_INDICATOR 22 ++ ++typedef struct { ++ uByte bDescLength; ++ uByte bDescriptorType; ++ uByte bNbrPorts; ++ uWord wHubCharacteristics; ++#define UHD_PWR 0x0003 ++#define UHD_PWR_GANGED 0x0000 ++#define UHD_PWR_INDIVIDUAL 0x0001 ++#define UHD_PWR_NO_SWITCH 0x0002 ++#define UHD_COMPOUND 0x0004 ++#define UHD_OC 0x0018 ++#define UHD_OC_GLOBAL 0x0000 ++#define UHD_OC_INDIVIDUAL 0x0008 ++#define UHD_OC_NONE 0x0010 ++#define UHD_TT_THINK 0x0060 ++#define UHD_TT_THINK_8 0x0000 ++#define UHD_TT_THINK_16 0x0020 ++#define UHD_TT_THINK_24 0x0040 ++#define UHD_TT_THINK_32 0x0060 ++#define UHD_PORT_IND 0x0080 ++ uByte bPwrOn2PwrGood; /* delay in 2 ms units */ ++#define UHD_PWRON_FACTOR 2 ++ uByte bHubContrCurrent; ++ uByte DeviceRemovable[32]; /* max 255 ports */ ++#define UHD_NOT_REMOV(desc, i) \ ++ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1) ++ /* deprecated */ uByte PortPowerCtrlMask[1]; ++} UPACKED usb_hub_descriptor_t; ++#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */ ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bcdUSB; ++ uByte bDeviceClass; ++ uByte bDeviceSubClass; ++ uByte bDeviceProtocol; ++ uByte bMaxPacketSize0; ++ uByte bNumConfigurations; ++ uByte bReserved; ++} UPACKED usb_device_qualifier_t; ++#define USB_DEVICE_QUALIFIER_SIZE 10 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bmAttributes; ++#define UOTG_SRP 0x01 ++#define UOTG_HNP 0x02 ++} UPACKED usb_otg_descriptor_t; ++ ++/* OTG feature selectors */ ++#define UOTG_B_HNP_ENABLE 3 ++#define UOTG_A_HNP_SUPPORT 4 ++#define UOTG_A_ALT_HNP_SUPPORT 5 ++ ++typedef struct { ++ uWord wStatus; ++/* Device status flags */ ++#define UDS_SELF_POWERED 0x0001 ++#define UDS_REMOTE_WAKEUP 0x0002 ++/* Endpoint status flags */ ++#define UES_HALT 0x0001 ++} UPACKED usb_status_t; ++ ++typedef struct { ++ uWord wHubStatus; ++#define UHS_LOCAL_POWER 0x0001 ++#define UHS_OVER_CURRENT 0x0002 ++ uWord wHubChange; ++} UPACKED usb_hub_status_t; ++ ++typedef struct { ++ uWord wPortStatus; ++#define UPS_CURRENT_CONNECT_STATUS 0x0001 ++#define UPS_PORT_ENABLED 0x0002 ++#define UPS_SUSPEND 0x0004 ++#define UPS_OVERCURRENT_INDICATOR 0x0008 ++#define UPS_RESET 0x0010 ++#define UPS_PORT_POWER 0x0100 ++#define UPS_LOW_SPEED 0x0200 ++#define UPS_HIGH_SPEED 0x0400 ++#define UPS_PORT_TEST 0x0800 ++#define UPS_PORT_INDICATOR 0x1000 ++ uWord wPortChange; ++#define UPS_C_CONNECT_STATUS 0x0001 ++#define UPS_C_PORT_ENABLED 0x0002 ++#define UPS_C_SUSPEND 0x0004 ++#define UPS_C_OVERCURRENT_INDICATOR 0x0008 ++#define UPS_C_PORT_RESET 0x0010 ++} UPACKED usb_port_status_t; ++ ++/* Device class codes */ ++#define UDCLASS_IN_INTERFACE 0x00 ++#define UDCLASS_COMM 0x02 ++#define UDCLASS_HUB 0x09 ++#define UDSUBCLASS_HUB 0x00 ++#define UDPROTO_FSHUB 0x00 ++#define UDPROTO_HSHUBSTT 0x01 ++#define UDPROTO_HSHUBMTT 0x02 ++#define UDCLASS_DIAGNOSTIC 0xdc ++#define UDCLASS_WIRELESS 0xe0 ++#define UDSUBCLASS_RF 0x01 ++#define UDPROTO_BLUETOOTH 0x01 ++#define UDCLASS_VENDOR 0xff ++ ++/* Interface class codes */ ++#define UICLASS_UNSPEC 0x00 ++ ++#define UICLASS_AUDIO 0x01 ++#define UISUBCLASS_AUDIOCONTROL 1 ++#define UISUBCLASS_AUDIOSTREAM 2 ++#define UISUBCLASS_MIDISTREAM 3 ++ ++#define UICLASS_CDC 0x02 /* communication */ ++#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1 ++#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2 ++#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3 ++#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4 ++#define UISUBCLASS_CAPI_CONTROLMODEL 5 ++#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6 ++#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7 ++#define UIPROTO_CDC_AT 1 ++ ++#define UICLASS_HID 0x03 ++#define UISUBCLASS_BOOT 1 ++#define UIPROTO_BOOT_KEYBOARD 1 ++ ++#define UICLASS_PHYSICAL 0x05 ++ ++#define UICLASS_IMAGE 0x06 ++ ++#define UICLASS_PRINTER 0x07 ++#define UISUBCLASS_PRINTER 1 ++#define UIPROTO_PRINTER_UNI 1 ++#define UIPROTO_PRINTER_BI 2 ++#define UIPROTO_PRINTER_1284 3 ++ ++#define UICLASS_MASS 0x08 ++#define UISUBCLASS_RBC 1 ++#define UISUBCLASS_SFF8020I 2 ++#define UISUBCLASS_QIC157 3 ++#define UISUBCLASS_UFI 4 ++#define UISUBCLASS_SFF8070I 5 ++#define UISUBCLASS_SCSI 6 ++#define UIPROTO_MASS_CBI_I 0 ++#define UIPROTO_MASS_CBI 1 ++#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */ ++#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */ ++ ++#define UICLASS_HUB 0x09 ++#define UISUBCLASS_HUB 0 ++#define UIPROTO_FSHUB 0 ++#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */ ++#define UIPROTO_HSHUBMTT 1 ++ ++#define UICLASS_CDC_DATA 0x0a ++#define UISUBCLASS_DATA 0 ++#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */ ++#define UIPROTO_DATA_HDLC 0x31 /* HDLC */ ++#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */ ++#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */ ++#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */ ++#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */ ++#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */ ++#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */ ++#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */ ++#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */ ++#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */ ++#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc.*/ ++#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */ ++ ++#define UICLASS_SMARTCARD 0x0b ++ ++/*#define UICLASS_FIRM_UPD 0x0c*/ ++ ++#define UICLASS_SECURITY 0x0d ++ ++#define UICLASS_DIAGNOSTIC 0xdc ++ ++#define UICLASS_WIRELESS 0xe0 ++#define UISUBCLASS_RF 0x01 ++#define UIPROTO_BLUETOOTH 0x01 ++ ++#define UICLASS_APPL_SPEC 0xfe ++#define UISUBCLASS_FIRMWARE_DOWNLOAD 1 ++#define UISUBCLASS_IRDA 2 ++#define UIPROTO_IRDA 0 ++ ++#define UICLASS_VENDOR 0xff ++ ++ ++#define USB_HUB_MAX_DEPTH 5 ++ ++/* ++ * Minimum time a device needs to be powered down to go through ++ * a power cycle. XXX Are these time in the spec? ++ */ ++#define USB_POWER_DOWN_TIME 200 /* ms */ ++#define USB_PORT_POWER_DOWN_TIME 100 /* ms */ ++ ++#if 0 ++/* These are the values from the spec. */ ++#define USB_PORT_RESET_DELAY 10 /* ms */ ++#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */ ++#define USB_PORT_RESET_RECOVERY 10 /* ms */ ++#define USB_PORT_POWERUP_DELAY 100 /* ms */ ++#define USB_SET_ADDRESS_SETTLE 2 /* ms */ ++#define USB_RESUME_DELAY (20*5) /* ms */ ++#define USB_RESUME_WAIT 10 /* ms */ ++#define USB_RESUME_RECOVERY 10 /* ms */ ++#define USB_EXTRA_POWER_UP_TIME 0 /* ms */ ++#else ++/* Allow for marginal (i.e. non-conforming) devices. */ ++#define USB_PORT_RESET_DELAY 50 /* ms */ ++#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */ ++#define USB_PORT_RESET_RECOVERY 250 /* ms */ ++#define USB_PORT_POWERUP_DELAY 300 /* ms */ ++#define USB_SET_ADDRESS_SETTLE 10 /* ms */ ++#define USB_RESUME_DELAY (50*5) /* ms */ ++#define USB_RESUME_WAIT 50 /* ms */ ++#define USB_RESUME_RECOVERY 50 /* ms */ ++#define USB_EXTRA_POWER_UP_TIME 20 /* ms */ ++#endif ++ ++#define USB_MIN_POWER 100 /* mA */ ++#define USB_MAX_POWER 500 /* mA */ ++ ++#define USB_BUS_RESET_DELAY 100 /* ms XXX?*/ ++ ++ ++#define USB_UNCONFIG_NO 0 ++#define USB_UNCONFIG_INDEX (-1) ++ ++/*** ioctl() related stuff ***/ ++ ++struct usb_ctl_request { ++ int ucr_addr; ++ usb_device_request_t ucr_request; ++ void *ucr_data; ++ int ucr_flags; ++#define USBD_SHORT_XFER_OK 0x04 /* allow short reads */ ++ int ucr_actlen; /* actual length transferred */ ++}; ++ ++struct usb_alt_interface { ++ int uai_config_index; ++ int uai_interface_index; ++ int uai_alt_no; ++}; ++ ++#define USB_CURRENT_CONFIG_INDEX (-1) ++#define USB_CURRENT_ALT_INDEX (-1) ++ ++struct usb_config_desc { ++ int ucd_config_index; ++ usb_config_descriptor_t ucd_desc; ++}; ++ ++struct usb_interface_desc { ++ int uid_config_index; ++ int uid_interface_index; ++ int uid_alt_index; ++ usb_interface_descriptor_t uid_desc; ++}; ++ ++struct usb_endpoint_desc { ++ int ued_config_index; ++ int ued_interface_index; ++ int ued_alt_index; ++ int ued_endpoint_index; ++ usb_endpoint_descriptor_t ued_desc; ++}; ++ ++struct usb_full_desc { ++ int ufd_config_index; ++ u_int ufd_size; ++ u_char *ufd_data; ++}; ++ ++struct usb_string_desc { ++ int usd_string_index; ++ int usd_language_id; ++ usb_string_descriptor_t usd_desc; ++}; ++ ++struct usb_ctl_report_desc { ++ int ucrd_size; ++ u_char ucrd_data[1024]; /* filled data size will vary */ ++}; ++ ++typedef struct { u_int32_t cookie; } usb_event_cookie_t; ++ ++#define USB_MAX_DEVNAMES 4 ++#define USB_MAX_DEVNAMELEN 16 ++struct usb_device_info { ++ u_int8_t udi_bus; ++ u_int8_t udi_addr; /* device address */ ++ usb_event_cookie_t udi_cookie; ++ char udi_product[USB_MAX_STRING_LEN]; ++ char udi_vendor[USB_MAX_STRING_LEN]; ++ char udi_release[8]; ++ u_int16_t udi_productNo; ++ u_int16_t udi_vendorNo; ++ u_int16_t udi_releaseNo; ++ u_int8_t udi_class; ++ u_int8_t udi_subclass; ++ u_int8_t udi_protocol; ++ u_int8_t udi_config; ++ u_int8_t udi_speed; ++#define USB_SPEED_LOW 1 ++#define USB_SPEED_FULL 2 ++#define USB_SPEED_HIGH 3 ++ int udi_power; /* power consumption in mA, 0 if selfpowered */ ++ int udi_nports; ++ char udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN]; ++ u_int8_t udi_ports[16];/* hub only: addresses of devices on ports */ ++#define USB_PORT_ENABLED 0xff ++#define USB_PORT_SUSPENDED 0xfe ++#define USB_PORT_POWERED 0xfd ++#define USB_PORT_DISABLED 0xfc ++}; ++ ++struct usb_ctl_report { ++ int ucr_report; ++ u_char ucr_data[1024]; /* filled data size will vary */ ++}; ++ ++struct usb_device_stats { ++ u_long uds_requests[4]; /* indexed by transfer type UE_* */ ++}; ++ ++ ++ ++ ++#define WUSB_MIN_IE 0x80 ++#define WUSB_WCTA_IE 0x80 ++#define WUSB_WCONNECTACK_IE 0x81 ++#define WUSB_WHOSTINFO_IE 0x82 ++#define WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3) ++#define WUHI_CA_RECONN 0x00 ++#define WUHI_CA_LIMITED 0x01 ++#define WUHI_CA_ALL 0x03 ++#define WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3) ++#define WUSB_WCHCHANGEANNOUNCE_IE 0x83 ++#define WUSB_WDEV_DISCONNECT_IE 0x84 ++#define WUSB_WHOST_DISCONNECT_IE 0x85 ++#define WUSB_WRELEASE_CHANNEL_IE 0x86 ++#define WUSB_WWORK_IE 0x87 ++#define WUSB_WCHANNEL_STOP_IE 0x88 ++#define WUSB_WDEV_KEEPALIVE_IE 0x89 ++#define WUSB_WISOCH_DISCARD_IE 0x8A ++#define WUSB_WRESETDEVICE_IE 0x8B ++#define WUSB_WXMIT_PACKET_ADJUST_IE 0x8C ++#define WUSB_MAX_IE 0x8C ++ ++/* Device Notification Types */ ++ ++#define WUSB_DN_MIN 0x01 ++#define WUSB_DN_CONNECT 0x01 ++# define WUSB_DA_OLDCONN 0x00 ++# define WUSB_DA_NEWCONN 0x01 ++# define WUSB_DA_SELF_BEACON 0x02 ++# define WUSB_DA_DIR_BEACON 0x04 ++# define WUSB_DA_NO_BEACON 0x06 ++#define WUSB_DN_DISCONNECT 0x02 ++#define WUSB_DN_EPRDY 0x03 ++#define WUSB_DN_MASAVAILCHANGED 0x04 ++#define WUSB_DN_REMOTEWAKEUP 0x05 ++#define WUSB_DN_SLEEP 0x06 ++#define WUSB_DN_ALIVE 0x07 ++#define WUSB_DN_MAX 0x07 ++ ++ ++/* WUSB Handshake Data. Used during the SET/GET HANDSHAKE requests */ ++typedef struct wusb_hndshk_data { ++ uint8_t bMessageNumber; ++ uint8_t bStatus; ++ uint8_t tTKID[3]; ++ uint8_t bReserved; ++ uint8_t CDID[16]; ++ uint8_t Nonce[16]; ++ uint8_t MIC[8]; ++} UPACKED wusb_hndshk_data_t; ++#define WUSB_HANDSHAKE_LEN_FOR_MIC 38 ++ ++/* WUSB Connection Context */ ++typedef struct wusb_conn_context { ++ uint8_t CHID [16]; ++ uint8_t CDID [16]; ++ uint8_t CK [16]; ++} UPACKED wusb_conn_context_t; ++ ++/* WUSB Security Descriptor */ ++typedef struct wusb_security_desc { ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint16_t wTotalLength; ++ uint8_t bNumEncryptionTypes; ++} UPACKED wusb_security_desc_t; ++ ++/* WUSB Encryption Type Descriptor */ ++typedef struct wusb_encrypt_type_desc { ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ ++ uint8_t bEncryptionType; ++#define WUETD_UNSECURE 0 ++#define WUETD_WIRED 1 ++#define WUETD_CCM_1 2 ++#define WUETD_RSA_1 3 ++ ++ uint8_t bEncryptionValue; ++ uint8_t bAuthKeyIndex; ++} UPACKED wusb_encrypt_type_desc_t; ++ ++/* WUSB Key Descriptor */ ++typedef struct wusb_key_desc { ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint8_t tTKID[3]; ++ uint8_t bReserved; ++ uint8_t KeyData[1]; /* variable length */ ++} UPACKED wusb_key_desc_t; ++ ++/* WUSB BOS Descriptor (Binary device Object Store) */ ++typedef struct wusb_bos_desc { ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint16_t wTotalLength; ++ uint8_t bNumDeviceCaps; ++} UPACKED wusb_bos_desc_t; ++ ++ ++/* Device Capability Type Codes */ ++#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01 ++ ++/* Device Capability Descriptor */ ++typedef struct wusb_dev_cap_desc { ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint8_t bDevCapabilityType; ++ uint8_t caps[1]; /* Variable length */ ++} UPACKED wusb_dev_cap_desc_t; ++ ++/* Device Capability Descriptor */ ++typedef struct wusb_dev_cap_uwb_desc { ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint8_t bDevCapabilityType; ++ uint8_t bmAttributes; ++ uint16_t wPHYRates; /* Bitmap */ ++ uint8_t bmTFITXPowerInfo; ++ uint8_t bmFFITXPowerInfo; ++ uint16_t bmBandGroup; ++ uint8_t bReserved; ++} UPACKED wusb_dev_cap_uwb_desc_t; ++ ++/* Wireless USB Endpoint Companion Descriptor */ ++typedef struct wusb_endpoint_companion_desc { ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint8_t bMaxBurst; ++ uint8_t bMaxSequence; ++ uint16_t wMaxStreamDelay; ++ uint16_t wOverTheAirPacketSize; ++ uint8_t bOverTheAirInterval; ++ uint8_t bmCompAttributes; ++} UPACKED wusb_endpoint_companion_desc_t; ++ ++ ++/* Wireless USB Numeric Association M1 Data Structure */ ++typedef struct wusb_m1_data { ++ uint8_t version; ++ uint16_t langId; ++ uint8_t deviceFriendlyNameLength; ++ uint8_t sha_256_m3[32]; ++ uint8_t deviceFriendlyName[256]; ++} UPACKED wusb_m1_data_t; ++ ++typedef struct wusb_m2_data { ++ uint8_t version; ++ uint16_t langId; ++ uint8_t hostFriendlyNameLength; ++ uint8_t pkh[384]; ++ uint8_t hostFriendlyName[256]; ++} UPACKED wusb_m2_data_t; ++ ++typedef struct wusb_m3_data { ++ uint8_t pkd[384]; ++ uint8_t nd; ++} UPACKED wusb_m3_data_t; ++ ++typedef struct wusb_m4_data { ++ uint32_t _attributeTypeIdAndLength_1; ++ uint16_t associationTypeId; ++ ++ uint32_t _attributeTypeIdAndLength_2; ++ uint16_t associationSubTypeId; ++ ++ uint32_t _attributeTypeIdAndLength_3; ++ uint32_t length; ++ ++ uint32_t _attributeTypeIdAndLength_4; ++ uint32_t associationStatus; ++ ++ uint32_t _attributeTypeIdAndLength_5; ++ uint8_t chid[16]; ++ ++ uint32_t _attributeTypeIdAndLength_6; ++ uint8_t cdid[16]; ++ ++ uint32_t _attributeTypeIdAndLength_7; ++ uint8_t bandGroups[2]; ++} UPACKED wusb_m4_data_t; ++ ++ ++ ++ ++#endif /* _USB_H_ */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dummy_audio.c bootc-3.2.21/drivers/usb/host/dwc_otg/dummy_audio.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dummy_audio.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dummy_audio.c 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,1575 @@ ++/* ++ * zero.c -- Gadget Zero, for USB development ++ * ++ * Copyright (C) 2003-2004 David Brownell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++/* ++ * Gadget Zero only needs two bulk endpoints, and is an example of how you ++ * can write a hardware-agnostic gadget driver running inside a USB device. ++ * ++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't ++ * affect most of the driver. ++ * ++ * Use it with the Linux host/master side "usbtest" driver to get a basic ++ * functional test of your device-side usb stack, or with "usb-skeleton". ++ * ++ * It supports two similar configurations. One sinks whatever the usb host ++ * writes, and in return sources zeroes. The other loops whatever the host ++ * writes back, so the host can read it. Module options include: ++ * ++ * buflen=N default N=4096, buffer size used ++ * qlen=N default N=32, how many buffers in the loopback queue ++ * loopdefault default false, list loopback config first ++ * ++ * Many drivers will only have one configuration, letting them be much ++ * simpler if they also don't support high speed operation (like this ++ * driver does). ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include ++#else ++# include ++#endif ++ ++#include ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++ ++/** ++ * usb_gadget_get_string - fill out a string descriptor ++ * @table: of c strings encoded using UTF-8 ++ * @id: string id, from low byte of wValue in get string descriptor ++ * @buf: at least 256 bytes ++ * ++ * Finds the UTF-8 string matching the ID, and converts it into a ++ * string descriptor in utf16-le. ++ * Returns length of descriptor (always even) or negative errno ++ * ++ * If your driver needs stings in multiple languages, you'll probably ++ * "switch (wIndex) { ... }" in your ep0 string descriptor logic, ++ * using this routine after choosing which set of UTF-8 strings to use. ++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with ++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 ++ * characters (which are also widely used in C strings). ++ */ ++int ++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) ++{ ++ struct usb_string *s; ++ int len; ++ ++ /* descriptor 0 has the language id */ ++ if (id == 0) { ++ buf [0] = 4; ++ buf [1] = USB_DT_STRING; ++ buf [2] = (u8) table->language; ++ buf [3] = (u8) (table->language >> 8); ++ return 4; ++ } ++ for (s = table->strings; s && s->s; s++) ++ if (s->id == id) ++ break; ++ ++ /* unrecognized: stall. */ ++ if (!s || !s->s) ++ return -EINVAL; ++ ++ /* string descriptors have length, tag, then UTF16-LE text */ ++ len = min ((size_t) 126, strlen (s->s)); ++ memset (buf + 2, 0, 2 * len); /* zero all the bytes */ ++ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len); ++ if (len < 0) ++ return -EINVAL; ++ buf [0] = (len + 1) * 2; ++ buf [1] = USB_DT_STRING; ++ return buf [0]; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/** ++ * usb_descriptor_fillbuf - fill buffer with descriptors ++ * @buf: Buffer to be filled ++ * @buflen: Size of buf ++ * @src: Array of descriptor pointers, terminated by null pointer. ++ * ++ * Copies descriptors into the buffer, returning the length or a ++ * negative error code if they can't all be copied. Useful when ++ * assembling descriptors for an associated set of interfaces used ++ * as part of configuring a composite device; or in other cases where ++ * sets of descriptors need to be marshaled. ++ */ ++int ++usb_descriptor_fillbuf(void *buf, unsigned buflen, ++ const struct usb_descriptor_header **src) ++{ ++ u8 *dest = buf; ++ ++ if (!src) ++ return -EINVAL; ++ ++ /* fill buffer from src[] until null descriptor ptr */ ++ for (; 0 != *src; src++) { ++ unsigned len = (*src)->bLength; ++ ++ if (len > buflen) ++ return -EINVAL; ++ memcpy(dest, *src, len); ++ buflen -= len; ++ dest += len; ++ } ++ return dest - (u8 *)buf; ++} ++ ++ ++/** ++ * usb_gadget_config_buf - builts a complete configuration descriptor ++ * @config: Header for the descriptor, including characteristics such ++ * as power requirements and number of interfaces. ++ * @desc: Null-terminated vector of pointers to the descriptors (interface, ++ * endpoint, etc) defining all functions in this device configuration. ++ * @buf: Buffer for the resulting configuration descriptor. ++ * @length: Length of buffer. If this is not big enough to hold the ++ * entire configuration descriptor, an error code will be returned. ++ * ++ * This copies descriptors into the response buffer, building a descriptor ++ * for that configuration. It returns the buffer length or a negative ++ * status code. The config.wTotalLength field is set to match the length ++ * of the result, but other descriptor fields (including power usage and ++ * interface count) must be set by the caller. ++ * ++ * Gadget drivers could use this when constructing a config descriptor ++ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the ++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. ++ */ ++int usb_gadget_config_buf( ++ const struct usb_config_descriptor *config, ++ void *buf, ++ unsigned length, ++ const struct usb_descriptor_header **desc ++) ++{ ++ struct usb_config_descriptor *cp = buf; ++ int len; ++ ++ /* config descriptor first */ ++ if (length < USB_DT_CONFIG_SIZE || !desc) ++ return -EINVAL; ++ *cp = *config; ++ ++ /* then interface/endpoint/class/vendor/... */ ++ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, ++ length - USB_DT_CONFIG_SIZE, desc); ++ if (len < 0) ++ return len; ++ len += USB_DT_CONFIG_SIZE; ++ if (len > 0xffff) ++ return -EINVAL; ++ ++ /* patch up the config descriptor */ ++ cp->bLength = USB_DT_CONFIG_SIZE; ++ cp->bDescriptorType = USB_DT_CONFIG; ++ cp->wTotalLength = cpu_to_le16(len); ++ cp->bmAttributes |= USB_CONFIG_ATT_ONE; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++#define RBUF_LEN (1024*1024) ++static int rbuf_start; ++static int rbuf_len; ++static __u8 rbuf[RBUF_LEN]; ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_VERSION "St Patrick's Day 2004" ++ ++static const char shortname [] = "zero"; ++static const char longname [] = "YAMAHA YST-MS35D USB Speaker "; ++ ++static const char source_sink [] = "source and sink data"; ++static const char loopback [] = "loop input to output"; ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * driver assumes self-powered hardware, and ++ * has no way for users to trigger remote wakeup. ++ * ++ * this version autoconfigures as much as possible, ++ * which is reasonable for most "bulk-only" drivers. ++ */ ++static const char *EP_IN_NAME; /* source */ ++static const char *EP_OUT_NAME; /* sink */ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* big enough to hold our biggest descriptor */ ++#define USB_BUFSIZ 512 ++ ++struct zero_dev { ++ spinlock_t lock; ++ struct usb_gadget *gadget; ++ struct usb_request *req; /* for control responses */ ++ ++ /* when configured, we have one of two configs: ++ * - source data (in to host) and sink it (out from host) ++ * - or loop it back (out from host back in to host) ++ */ ++ u8 config; ++ struct usb_ep *in_ep, *out_ep; ++ ++ /* autoresume timer */ ++ struct timer_list resume; ++}; ++ ++#define xprintk(d,level,fmt,args...) \ ++ dev_printk(level , &(d)->gadget->dev , fmt , ## args) ++ ++#ifdef DEBUG ++#define DBG(dev,fmt,args...) \ ++ xprintk(dev , KERN_DEBUG , fmt , ## args) ++#else ++#define DBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* DEBUG */ ++ ++#ifdef VERBOSE ++#define VDBG DBG ++#else ++#define VDBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* VERBOSE */ ++ ++#define ERROR(dev,fmt,args...) \ ++ xprintk(dev , KERN_ERR , fmt , ## args) ++#define WARN(dev,fmt,args...) \ ++ xprintk(dev , KERN_WARNING , fmt , ## args) ++#define INFO(dev,fmt,args...) \ ++ xprintk(dev , KERN_INFO , fmt , ## args) ++ ++/*-------------------------------------------------------------------------*/ ++ ++static unsigned buflen = 4096; ++static unsigned qlen = 32; ++static unsigned pattern = 0; ++ ++module_param (buflen, uint, S_IRUGO|S_IWUSR); ++module_param (qlen, uint, S_IRUGO|S_IWUSR); ++module_param (pattern, uint, S_IRUGO|S_IWUSR); ++ ++/* ++ * if it's nonzero, autoresume says how many seconds to wait ++ * before trying to wake up the host after suspend. ++ */ ++static unsigned autoresume = 0; ++module_param (autoresume, uint, 0); ++ ++/* ++ * Normally the "loopback" configuration is second (index 1) so ++ * it's not the default. Here's where to change that order, to ++ * work better with hosts where config changes are problematic. ++ * Or controllers (like superh) that only support one config. ++ */ ++static int loopdefault = 0; ++ ++module_param (loopdefault, bool, S_IRUGO|S_IWUSR); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Thanks to NetChip Technologies for donating this product ID. ++ * ++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! ++ * Instead: allocate your own, using normal USB-IF procedures. ++ */ ++#ifndef CONFIG_USB_ZERO_HNPTEST ++#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ ++#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ ++#else ++#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ ++#define DRIVER_PRODUCT_NUM 0xbadd ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * DESCRIPTORS ... most are static, but strings and (full) ++ * configuration descriptors are built on demand. ++ */ ++ ++/* ++#define STRING_MANUFACTURER 25 ++#define STRING_PRODUCT 42 ++#define STRING_SERIAL 101 ++*/ ++#define STRING_MANUFACTURER 1 ++#define STRING_PRODUCT 2 ++#define STRING_SERIAL 3 ++ ++#define STRING_SOURCE_SINK 250 ++#define STRING_LOOPBACK 251 ++ ++/* ++ * This device advertises two configurations; these numbers work ++ * on a pxa250 as well as more flexible hardware. ++ */ ++#define CONFIG_SOURCE_SINK 3 ++#define CONFIG_LOOPBACK 2 ++ ++/* ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), ++ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 2, ++}; ++*/ ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ .bcdUSB = __constant_cpu_to_le16 (0x0100), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ .bDeviceSubClass = 0, ++ .bDeviceProtocol = 0, ++ .bMaxPacketSize0 = 64, ++ .bcdDevice = __constant_cpu_to_le16 (0x0100), ++ .idVendor = __constant_cpu_to_le16 (0x0499), ++ .idProduct = __constant_cpu_to_le16 (0x3002), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 1, ++}; ++ ++static struct usb_config_descriptor ++z_config = { ++ .bLength = sizeof z_config, ++ .bDescriptorType = USB_DT_CONFIG, ++ ++ /* compute wTotalLength on the fly */ ++ .bNumInterfaces = 2, ++ .bConfigurationValue = 1, ++ .iConfiguration = 0, ++ .bmAttributes = 0x40, ++ .bMaxPower = 0, /* self-powered */ ++}; ++ ++ ++static struct usb_otg_descriptor ++otg_descriptor = { ++ .bLength = sizeof otg_descriptor, ++ .bDescriptorType = USB_DT_OTG, ++ ++ .bmAttributes = USB_OTG_SRP, ++}; ++ ++/* one interface in each configuration */ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ ++/* ++ * usb 2.0 devices need to expose both high speed and full speed ++ * descriptors, unless they only run at full speed. ++ * ++ * that means alternate endpoint descriptors (bigger packets) ++ * and a "device qualifier" ... plus more construction options ++ * for the config descriptor. ++ */ ++ ++static struct usb_qualifier_descriptor ++dev_qualifier = { ++ .bLength = sizeof dev_qualifier, ++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .bNumConfigurations = 2, ++}; ++ ++ ++struct usb_cs_as_general_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bTerminalLink; ++ __u8 bDelay; ++ __u16 wFormatTag; ++} __attribute__ ((packed)); ++ ++struct usb_cs_as_format_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bFormatType; ++ __u8 bNrChannels; ++ __u8 bSubframeSize; ++ __u8 bBitResolution; ++ __u8 bSamfreqType; ++ __u8 tLowerSamFreq[3]; ++ __u8 tUpperSamFreq[3]; ++} __attribute__ ((packed)); ++ ++static const struct usb_interface_descriptor ++z_audio_control_if_desc = { ++ .bLength = sizeof z_audio_control_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x1, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc2 = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 1, ++ .bNumEndpoints = 1, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_cs_as_general_descriptor ++z_audio_cs_as_if_desc = { ++ .bLength = 7, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 0x01, ++ .bTerminalLink = 0x01, ++ .bDelay = 0x0, ++ .wFormatTag = __constant_cpu_to_le16 (0x0001) ++}; ++ ++ ++static const struct usb_cs_as_format_descriptor ++z_audio_cs_as_format_desc = { ++ .bLength = 0xe, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 2, ++ .bFormatType = 1, ++ .bNrChannels = 1, ++ .bSubframeSize = 1, ++ .bBitResolution = 8, ++ .bSamfreqType = 0, ++ .tLowerSamFreq = {0x7e, 0x13, 0x00}, ++ .tUpperSamFreq = {0xe2, 0xd6, 0x00}, ++}; ++ ++static const struct usb_endpoint_descriptor ++z_iso_ep = { ++ .bLength = 0x09, ++ .bDescriptorType = 0x05, ++ .bEndpointAddress = 0x04, ++ .bmAttributes = 0x09, ++ .wMaxPacketSize = 0x0038, ++ .bInterval = 0x01, ++ .bRefresh = 0x00, ++ .bSynchAddress = 0x00, ++}; ++ ++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++// 9 bytes ++static char z_ac_interface_header_desc[] = ++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 }; ++ ++// 12 bytes ++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, ++ 0x03, 0x00, 0x00, 0x00}; ++// 13 bytes ++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, ++ 0x02, 0x00, 0x02, 0x00, 0x00}; ++// 9 bytes ++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, ++ 0x00}; ++ ++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00, ++ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00, ++ 0x00}; ++ ++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++ ++ ++static const struct usb_descriptor_header *z_function [] = { ++ (struct usb_descriptor_header *) &z_audio_control_if_desc, ++ (struct usb_descriptor_header *) &z_ac_interface_header_desc, ++ (struct usb_descriptor_header *) &z_0, ++ (struct usb_descriptor_header *) &z_1, ++ (struct usb_descriptor_header *) &z_2, ++ (struct usb_descriptor_header *) &z_audio_if_desc, ++ (struct usb_descriptor_header *) &z_audio_if_desc2, ++ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc, ++ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc, ++ (struct usb_descriptor_header *) &z_iso_ep, ++ (struct usb_descriptor_header *) &z_iso_ep2, ++ (struct usb_descriptor_header *) &za_0, ++ (struct usb_descriptor_header *) &za_1, ++ (struct usb_descriptor_header *) &za_2, ++ (struct usb_descriptor_header *) &za_3, ++ (struct usb_descriptor_header *) &za_4, ++ (struct usb_descriptor_header *) &za_5, ++ (struct usb_descriptor_header *) &za_6, ++ (struct usb_descriptor_header *) &za_7, ++ (struct usb_descriptor_header *) &za_8, ++ (struct usb_descriptor_header *) &za_9, ++ (struct usb_descriptor_header *) &za_10, ++ (struct usb_descriptor_header *) &za_11, ++ (struct usb_descriptor_header *) &za_12, ++ (struct usb_descriptor_header *) &za_13, ++ (struct usb_descriptor_header *) &za_14, ++ (struct usb_descriptor_header *) &za_15, ++ (struct usb_descriptor_header *) &za_16, ++ (struct usb_descriptor_header *) &za_17, ++ (struct usb_descriptor_header *) &za_18, ++ (struct usb_descriptor_header *) &za_19, ++ (struct usb_descriptor_header *) &za_20, ++ (struct usb_descriptor_header *) &za_21, ++ (struct usb_descriptor_header *) &za_22, ++ (struct usb_descriptor_header *) &za_23, ++ (struct usb_descriptor_header *) &za_24, ++ NULL, ++}; ++ ++/* maxpacket and other transfer characteristics vary by speed. */ ++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) ++ ++#else ++ ++/* if there's no high speed support, maxpacket doesn't change. */ ++#define ep_desc(g,hs,fs) fs ++ ++#endif /* !CONFIG_USB_GADGET_DUALSPEED */ ++ ++static char manufacturer [40]; ++//static char serial [40]; ++static char serial [] = "Ser 00 em"; ++ ++/* static strings, in UTF-8 */ ++static struct usb_string strings [] = { ++ { STRING_MANUFACTURER, manufacturer, }, ++ { STRING_PRODUCT, longname, }, ++ { STRING_SERIAL, serial, }, ++ { STRING_LOOPBACK, loopback, }, ++ { STRING_SOURCE_SINK, source_sink, }, ++ { } /* end of list */ ++}; ++ ++static struct usb_gadget_strings stringtab = { ++ .language = 0x0409, /* en-us */ ++ .strings = strings, ++}; ++ ++/* ++ * config descriptors are also handcrafted. these must agree with code ++ * that sets configurations, and with code managing interfaces and their ++ * altsettings. other complexity may come from: ++ * ++ * - high speed support, including "other speed config" rules ++ * - multiple configurations ++ * - interfaces with alternate settings ++ * - embedded class or vendor-specific descriptors ++ * ++ * this handles high speed, and has a second config that could as easily ++ * have been an alternate interface setting (on most hardware). ++ * ++ * NOTE: to demonstrate (and test) more USB capabilities, this driver ++ * should include an altsetting to test interrupt transfers, including ++ * high bandwidth modes at high speed. (Maybe work like Intel's test ++ * device?) ++ */ ++static int ++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) ++{ ++ int len; ++ const struct usb_descriptor_header **function; ++ ++ function = z_function; ++ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function); ++ if (len < 0) ++ return len; ++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_request * ++alloc_ep_req (struct usb_ep *ep, unsigned length) ++{ ++ struct usb_request *req; ++ ++ req = usb_ep_alloc_request (ep, GFP_ATOMIC); ++ if (req) { ++ req->length = length; ++ req->buf = usb_ep_alloc_buffer (ep, length, ++ &req->dma, GFP_ATOMIC); ++ if (!req->buf) { ++ usb_ep_free_request (ep, req); ++ req = NULL; ++ } ++ } ++ return req; ++} ++ ++static void free_ep_req (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->buf) ++ usb_ep_free_buffer (ep, req->buf, req->dma, req->length); ++ usb_ep_free_request (ep, req); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* optionally require specific source/sink data patterns */ ++ ++static int ++check_read_data ( ++ struct zero_dev *dev, ++ struct usb_ep *ep, ++ struct usb_request *req ++) ++{ ++ unsigned i; ++ u8 *buf = req->buf; ++ ++ for (i = 0; i < req->actual; i++, buf++) { ++ switch (pattern) { ++ /* all-zeroes has no synchronization issues */ ++ case 0: ++ if (*buf == 0) ++ continue; ++ break; ++ /* mod63 stays in sync with short-terminated transfers, ++ * or otherwise when host and gadget agree on how large ++ * each usb transfer request should be. resync is done ++ * with set_interface or set_config. ++ */ ++ case 1: ++ if (*buf == (u8)(i % 63)) ++ continue; ++ break; ++ } ++ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); ++ usb_ep_set_halt (ep); ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_reset_config (struct zero_dev *dev) ++{ ++ if (dev->config == 0) ++ return; ++ ++ DBG (dev, "reset config\n"); ++ ++ /* just disable endpoints, forcing completion of pending i/o. ++ * all our completion handlers free their requests in this case. ++ */ ++ if (dev->in_ep) { ++ usb_ep_disable (dev->in_ep); ++ dev->in_ep = NULL; ++ } ++ if (dev->out_ep) { ++ usb_ep_disable (dev->out_ep); ++ dev->out_ep = NULL; ++ } ++ dev->config = 0; ++ del_timer (&dev->resume); ++} ++ ++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos)) ++ ++static void ++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ struct zero_dev *dev = ep->driver_data; ++ int status = req->status; ++ int i, j; ++ ++ switch (status) { ++ ++ case 0: /* normal completion? */ ++ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual); ++ for (i=0, j=rbuf_start; iactual; i++) { ++ //printk ("%02x ", ((__u8*)req->buf)[i]); ++ rbuf[j] = ((__u8*)req->buf)[i]; ++ j++; ++ if (j >= RBUF_LEN) j=0; ++ } ++ rbuf_start = j; ++ //printk ("\n\n"); ++ ++ if (rbuf_len < RBUF_LEN) { ++ rbuf_len += req->actual; ++ if (rbuf_len > RBUF_LEN) { ++ rbuf_len = RBUF_LEN; ++ } ++ } ++ ++ break; ++ ++ /* this endpoint is normally active while we're configured */ ++ case -ECONNABORTED: /* hardware forced ep reset */ ++ case -ECONNRESET: /* request dequeued */ ++ case -ESHUTDOWN: /* disconnect from host */ ++ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, ++ req->actual, req->length); ++ if (ep == dev->out_ep) ++ check_read_data (dev, ep, req); ++ free_ep_req (ep, req); ++ return; ++ ++ case -EOVERFLOW: /* buffer overrun on read means that ++ * we didn't provide a big enough ++ * buffer. ++ */ ++ default: ++#if 1 ++ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, ++ status, req->actual, req->length); ++#endif ++ case -EREMOTEIO: /* short read */ ++ break; ++ } ++ ++ status = usb_ep_queue (ep, req, GFP_ATOMIC); ++ if (status) { ++ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", ++ ep->name, req->length, status); ++ usb_ep_set_halt (ep); ++ /* FIXME recover later ... somehow */ ++ } ++} ++ ++static struct usb_request * ++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags) ++{ ++ struct usb_request *req; ++ int status; ++ ++ req = alloc_ep_req (ep, 512); ++ if (!req) ++ return NULL; ++ ++ req->complete = zero_isoc_complete; ++ ++ status = usb_ep_queue (ep, req, gfp_flags); ++ if (status) { ++ struct zero_dev *dev = ep->driver_data; ++ ++ ERROR (dev, "start %s --> %d\n", ep->name, status); ++ free_ep_req (ep, req); ++ req = NULL; ++ } ++ ++ return req; ++} ++ ++/* change our operational config. this code must agree with the code ++ * that returns config descriptors, and altsetting code. ++ * ++ * it's also responsible for power management interactions. some ++ * configurations might not work with our current power sources. ++ * ++ * note that some device controller hardware will constrain what this ++ * code can do, perhaps by disallowing more than one configuration or ++ * by limiting configuration choices (like the pxa2xx). ++ */ ++static int ++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) ++{ ++ int result = 0; ++ struct usb_gadget *gadget = dev->gadget; ++ const struct usb_endpoint_descriptor *d; ++ struct usb_ep *ep; ++ ++ if (number == dev->config) ++ return 0; ++ ++ zero_reset_config (dev); ++ ++ gadget_for_each_ep (ep, gadget) { ++ ++ if (strcmp (ep->name, "ep4") == 0) { ++ ++ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6 ++ result = usb_ep_enable (ep, d); ++ ++ if (result == 0) { ++ ep->driver_data = dev; ++ dev->in_ep = ep; ++ ++ if (zero_start_isoc_ep (ep, gfp_flags) != 0) { ++ ++ dev->in_ep = ep; ++ continue; ++ } ++ ++ usb_ep_disable (ep); ++ result = -EIO; ++ } ++ } ++ ++ } ++ ++ dev->config = number; ++ return result; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->status || req->actual != req->length) ++ DBG ((struct zero_dev *) ep->driver_data, ++ "setup complete --> %d, %d/%d\n", ++ req->status, req->actual, req->length); ++} ++ ++/* ++ * The setup() callback implements all the ep0 functionality that's ++ * not handled lower down, in hardware or the hardware driver (like ++ * device and endpoint feature flags, and their status). It's all ++ * housekeeping for the gadget function we're implementing. Most of ++ * the work is in config-specific setup. ++ */ ++static int ++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ struct usb_request *req = dev->req; ++ int value = -EOPNOTSUPP; ++ ++ /* usually this stores reply data in the pre-allocated ep0 buffer, ++ * but config change events will reconfigure hardware. ++ */ ++ req->zero = 0; ++ switch (ctrl->bRequest) { ++ ++ case USB_REQ_GET_DESCRIPTOR: ++ ++ switch (ctrl->wValue >> 8) { ++ ++ case USB_DT_DEVICE: ++ value = min (ctrl->wLength, (u16) sizeof device_desc); ++ memcpy (req->buf, &device_desc, value); ++ break; ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ case USB_DT_DEVICE_QUALIFIER: ++ if (!gadget->is_dualspeed) ++ break; ++ value = min (ctrl->wLength, (u16) sizeof dev_qualifier); ++ memcpy (req->buf, &dev_qualifier, value); ++ break; ++ ++ case USB_DT_OTHER_SPEED_CONFIG: ++ if (!gadget->is_dualspeed) ++ break; ++ // FALLTHROUGH ++#endif /* CONFIG_USB_GADGET_DUALSPEED */ ++ case USB_DT_CONFIG: ++ value = config_buf (gadget, req->buf, ++ ctrl->wValue >> 8, ++ ctrl->wValue & 0xff); ++ if (value >= 0) ++ value = min (ctrl->wLength, (u16) value); ++ break; ++ ++ case USB_DT_STRING: ++ /* wIndex == language code. ++ * this driver only handles one language, you can ++ * add string tables for other languages, using ++ * any UTF-8 characters ++ */ ++ value = usb_gadget_get_string (&stringtab, ++ ctrl->wValue & 0xff, req->buf); ++ if (value >= 0) { ++ value = min (ctrl->wLength, (u16) value); ++ } ++ break; ++ } ++ break; ++ ++ /* currently two configs, two speeds */ ++ case USB_REQ_SET_CONFIGURATION: ++ if (ctrl->bRequestType != 0) ++ goto unknown; ++ ++ spin_lock (&dev->lock); ++ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC); ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ if (ctrl->bRequestType != USB_DIR_IN) ++ goto unknown; ++ *(u8 *)req->buf = dev->config; ++ value = min (ctrl->wLength, (u16) 1); ++ break; ++ ++ /* until we add altsetting support, or other interfaces, ++ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) ++ * and already killed pending endpoint I/O. ++ */ ++ case USB_REQ_SET_INTERFACE: ++ ++ if (ctrl->bRequestType != USB_RECIP_INTERFACE) ++ goto unknown; ++ spin_lock (&dev->lock); ++ if (dev->config) { ++ u8 config = dev->config; ++ ++ /* resets interface configuration, forgets about ++ * previous transaction state (queued bufs, etc) ++ * and re-inits endpoint state (toggle etc) ++ * no response queued, just zero status == success. ++ * if we had more than one interface we couldn't ++ * use this "reset the config" shortcut. ++ */ ++ zero_reset_config (dev); ++ zero_set_config (dev, config, GFP_ATOMIC); ++ value = 0; ++ } ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_INTERFACE: ++ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) { ++ value = ctrl->wLength; ++ break; ++ } ++ else { ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) ++ goto unknown; ++ if (!dev->config) ++ break; ++ if (ctrl->wIndex != 0) { ++ value = -EDOM; ++ break; ++ } ++ *(u8 *)req->buf = 0; ++ value = min (ctrl->wLength, (u16) 1); ++ } ++ break; ++ ++ /* ++ * These are the same vendor-specific requests supported by ++ * Intel's USB 2.0 compliance test devices. We exceed that ++ * device spec by allowing multiple-packet requests. ++ */ ++ case 0x5b: /* control WRITE test -- fill the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* just read that many bytes into the buffer */ ++ if (ctrl->wLength > USB_BUFSIZ) ++ break; ++ value = ctrl->wLength; ++ break; ++ case 0x5c: /* control READ test -- return the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* expect those bytes are still in the buffer; send back */ ++ if (ctrl->wLength > USB_BUFSIZ ++ || ctrl->wLength != req->length) ++ break; ++ value = ctrl->wLength; ++ break; ++ ++ case 0x01: // SET_CUR ++ case 0x02: ++ case 0x03: ++ case 0x04: ++ case 0x05: ++ value = ctrl->wLength; ++ break; ++ case 0x81: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xe3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x81; ++ //((u8*)req->buf)[1] = 0x81; ++ value = ctrl->wLength; ++ break; ++ case 0x82: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xc3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x82; ++ //((u8*)req->buf)[1] = 0x82; ++ value = ctrl->wLength; ++ break; ++ case 0x83: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x00; ++ break; ++ case 0x0300: ++ ((u8*)req->buf)[0] = 0x60; ++ break; ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x18; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x83; ++ //((u8*)req->buf)[1] = 0x83; ++ value = ctrl->wLength; ++ break; ++ case 0x84: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x01; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x08; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x84; ++ //((u8*)req->buf)[1] = 0x84; ++ value = ctrl->wLength; ++ break; ++ case 0x85: ++ ((u8*)req->buf)[0] = 0x85; ++ ((u8*)req->buf)[1] = 0x85; ++ value = ctrl->wLength; ++ break; ++ ++ ++ default: ++unknown: ++ printk("unknown control req%02x.%02x v%04x i%04x l%d\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ ctrl->wValue, ctrl->wIndex, ctrl->wLength); ++ } ++ ++ /* respond with data transfer before status phase? */ ++ if (value >= 0) { ++ req->length = value; ++ req->zero = value < ctrl->wLength ++ && (value % gadget->ep0->maxpacket) == 0; ++ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); ++ if (value < 0) { ++ DBG (dev, "ep_queue < 0 --> %d\n", value); ++ req->status = 0; ++ zero_setup_complete (gadget->ep0, req); ++ } ++ } ++ ++ /* device either stalls (value < 0) or reports success */ ++ return value; ++} ++ ++static void ++zero_disconnect (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ unsigned long flags; ++ ++ spin_lock_irqsave (&dev->lock, flags); ++ zero_reset_config (dev); ++ ++ /* a more significant application might have some non-usb ++ * activities to quiesce here, saving resources like power ++ * or pushing the notification up a network stack. ++ */ ++ spin_unlock_irqrestore (&dev->lock, flags); ++ ++ /* next we may get setup() calls to enumerate new connections; ++ * or an unbind() during shutdown (including removing module). ++ */ ++} ++ ++static void ++zero_autoresume (unsigned long _dev) ++{ ++ struct zero_dev *dev = (struct zero_dev *) _dev; ++ int status; ++ ++ /* normally the host would be woken up for something ++ * more significant than just a timer firing... ++ */ ++ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { ++ status = usb_gadget_wakeup (dev->gadget); ++ DBG (dev, "wakeup --> %d\n", status); ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_unbind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "unbind\n"); ++ ++ /* we've already been disconnected ... no i/o is active */ ++ if (dev->req) ++ free_ep_req (gadget->ep0, dev->req); ++ del_timer_sync (&dev->resume); ++ kfree (dev); ++ set_gadget_data (gadget, NULL); ++} ++ ++static int ++zero_bind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev; ++ //struct usb_ep *ep; ++ ++ printk("binding\n"); ++ /* ++ * DRIVER POLICY CHOICE: you may want to do this differently. ++ * One thing to avoid is reusing a bcdDevice revision code ++ * with different host-visible configurations or behavior ++ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc ++ */ ++ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); ++ ++ ++ /* ok, we made sense of the hardware ... */ ++ dev = kmalloc (sizeof *dev, SLAB_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ memset (dev, 0, sizeof *dev); ++ spin_lock_init (&dev->lock); ++ dev->gadget = gadget; ++ set_gadget_data (gadget, dev); ++ ++ /* preallocate control response and buffer */ ++ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); ++ if (!dev->req) ++ goto enomem; ++ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, ++ &dev->req->dma, GFP_KERNEL); ++ if (!dev->req->buf) ++ goto enomem; ++ ++ dev->req->complete = zero_setup_complete; ++ ++ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; ++ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ /* assume ep0 uses the same value for both speeds ... */ ++ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; ++ ++ /* and that all endpoints are dual-speed */ ++ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; ++ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; ++#endif ++ ++ usb_gadget_set_selfpowered (gadget); ++ ++ init_timer (&dev->resume); ++ dev->resume.function = zero_autoresume; ++ dev->resume.data = (unsigned long) dev; ++ ++ gadget->ep0->driver_data = dev; ++ ++ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); ++ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, ++ EP_OUT_NAME, EP_IN_NAME); ++ ++ snprintf (manufacturer, sizeof manufacturer, ++ UTS_SYSNAME " " UTS_RELEASE " with %s", ++ gadget->name); ++ ++ return 0; ++ ++enomem: ++ zero_unbind (gadget); ++ return -ENOMEM; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_suspend (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ if (gadget->speed == USB_SPEED_UNKNOWN) ++ return; ++ ++ if (autoresume) { ++ mod_timer (&dev->resume, jiffies + (HZ * autoresume)); ++ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); ++ } else ++ DBG (dev, "suspend\n"); ++} ++ ++static void ++zero_resume (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "resume\n"); ++ del_timer (&dev->resume); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_gadget_driver zero_driver = { ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ .speed = USB_SPEED_HIGH, ++#else ++ .speed = USB_SPEED_FULL, ++#endif ++ .function = (char *) longname, ++ .bind = zero_bind, ++ .unbind = zero_unbind, ++ ++ .setup = zero_setup, ++ .disconnect = zero_disconnect, ++ ++ .suspend = zero_suspend, ++ .resume = zero_resume, ++ ++ .driver = { ++ .name = (char *) shortname, ++ // .shutdown = ... ++ // .suspend = ... ++ // .resume = ... ++ }, ++}; ++ ++MODULE_AUTHOR ("David Brownell"); ++MODULE_LICENSE ("Dual BSD/GPL"); ++ ++static struct proc_dir_entry *pdir, *pfile; ++ ++static int isoc_read_data (char *page, char **start, ++ off_t off, int count, ++ int *eof, void *data) ++{ ++ int i; ++ static int c = 0; ++ static int done = 0; ++ static int s = 0; ++ ++/* ++ printk ("\ncount: %d\n", count); ++ printk ("rbuf_start: %d\n", rbuf_start); ++ printk ("rbuf_len: %d\n", rbuf_len); ++ printk ("off: %d\n", off); ++ printk ("start: %p\n\n", *start); ++*/ ++ if (done) { ++ c = 0; ++ done = 0; ++ *eof = 1; ++ return 0; ++ } ++ ++ if (c == 0) { ++ if (rbuf_len == RBUF_LEN) ++ s = rbuf_start; ++ else s = 0; ++ } ++ ++ for (i=0; i= rbuf_len) { ++ *eof = 1; ++ done = 1; ++ } ++ ++ ++ return i; ++} ++ ++static int __init init (void) ++{ ++ ++ int retval = 0; ++ ++ pdir = proc_mkdir("isoc_test", NULL); ++ if(pdir == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating dir\n"); ++ goto done; ++ } ++ pdir->owner = THIS_MODULE; ++ ++ pfile = create_proc_read_entry("isoc_data", ++ 0444, pdir, ++ isoc_read_data, ++ NULL); ++ if (pfile == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating file\n"); ++ goto no_file; ++ } ++ pfile->owner = THIS_MODULE; ++ ++ return usb_gadget_register_driver (&zero_driver); ++ ++ no_file: ++ remove_proc_entry("isoc_data", NULL); ++ done: ++ return retval; ++} ++module_init (init); ++ ++static void __exit cleanup (void) ++{ ++ ++ usb_gadget_unregister_driver (&zero_driver); ++ ++ remove_proc_entry("isoc_data", pdir); ++ remove_proc_entry("isoc_test", NULL); ++} ++module_exit (cleanup); +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_cfi_common.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_cfi_common.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_cfi_common.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_cfi_common.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,142 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CFI_COMMON_H__) ++#define __DWC_CFI_COMMON_H__ ++ ++//#include ++ ++/** ++ * @file ++ * ++ * This file contains the CFI specific common constants, interfaces ++ * (functions and macros) and structures for Linux. No PCD specific ++ * data structure or definition is to be included in this file. ++ * ++ */ ++ ++/** This is a request for all Core Features */ ++#define VEN_CORE_GET_FEATURES 0xB1 ++ ++/** This is a request to get the value of a specific Core Feature */ ++#define VEN_CORE_GET_FEATURE 0xB2 ++ ++/** This command allows the host to set the value of a specific Core Feature */ ++#define VEN_CORE_SET_FEATURE 0xB3 ++ ++/** This command allows the host to set the default values of ++ * either all or any specific Core Feature ++ */ ++#define VEN_CORE_RESET_FEATURES 0xB4 ++ ++/** This command forces the PCD to write the deferred values of a Core Features */ ++#define VEN_CORE_ACTIVATE_FEATURES 0xB5 ++ ++/** This request reads a DWORD value from a register at the specified offset */ ++#define VEN_CORE_READ_REGISTER 0xB6 ++ ++/** This request writes a DWORD value into a register at the specified offset */ ++#define VEN_CORE_WRITE_REGISTER 0xB7 ++ ++/** This structure is the header of the Core Features dataset returned to ++ * the Host ++ */ ++struct cfi_all_features_header { ++/** The features header structure length is */ ++#define CFI_ALL_FEATURES_HDR_LEN 8 ++ /** ++ * The total length of the features dataset returned to the Host ++ */ ++ uint16_t wTotalLen; ++ ++ /** ++ * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H). ++ * This field identifies the version of the CFI Specification with which ++ * the device is compliant. ++ */ ++ uint16_t wVersion; ++ ++ /** The ID of the Core */ ++ uint16_t wCoreID; ++#define CFI_CORE_ID_UDC 1 ++#define CFI_CORE_ID_OTG 2 ++#define CFI_CORE_ID_WUDEV 3 ++ ++ /** Number of features returned by VEN_CORE_GET_FEATURES request */ ++ uint16_t wNumFeatures; ++} UPACKED; ++ ++typedef struct cfi_all_features_header cfi_all_features_header_t; ++ ++/** This structure is a header of the Core Feature descriptor dataset returned to ++ * the Host after the VEN_CORE_GET_FEATURES request ++ */ ++struct cfi_feature_desc_header { ++#define CFI_FEATURE_DESC_HDR_LEN 8 ++ ++ /** The feature ID */ ++ uint16_t wFeatureID; ++ ++ /** Length of this feature descriptor in bytes - including the ++ * length of the feature name string ++ */ ++ uint16_t wLength; ++ ++ /** The data length of this feature in bytes */ ++ uint16_t wDataLength; ++ ++ /** ++ * Attributes of this features ++ * D0: Access rights ++ * 0 - Read/Write ++ * 1 - Read only ++ */ ++ uint8_t bmAttributes; ++#define CFI_FEATURE_ATTR_RO 1 ++#define CFI_FEATURE_ATTR_RW 0 ++ ++ /** Length of the feature name in bytes */ ++ uint8_t bNameLen; ++ ++ /** The feature name buffer */ ++ //uint8_t *name; ++} UPACKED; ++ ++typedef struct cfi_feature_desc_header cfi_feature_desc_header_t; ++ ++/** ++ * This structure describes a NULL terminated string referenced by its id field. ++ * It is very similar to usb_string structure but has the id field type set to 16-bit. ++ */ ++struct cfi_string { ++ uint16_t id; ++ const uint8_t *s; ++}; ++typedef struct cfi_string cfi_string_t; ++ ++#endif +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_attr.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_attr.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_attr.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_attr.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,1316 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ ++ * $Revision: #35 $ ++ * $Date: 2009/04/03 $ ++ * $Change: 1225160 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. The Linux driver attributes ++ * feature will be used to provide the Linux Diagnostic ++ * Interface. These attributes are accessed through sysfs. ++ */ ++ ++/** @page "Linux Module Attributes" ++ * ++ * The Linux module attributes feature is used to provide the Linux ++ * Diagnostic Interface. These attributes are accessed through sysfs. ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. ++ ++ The following table shows the attributes. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
Name Description Access
mode Returns the current mode: 0 for device mode, 1 for host mode Read
hnpcapable Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value. Read/Write
srpcapable Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value. Read/Write
hsic_connect Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register. ++ Read returns the current value. Read/Write
inv_sel_hsic Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register. ++ Read returns the current value. Read/Write
hnp Initiates the Host Negotiation Protocol. Read returns the status. Read/Write
srp Initiates the Session Request Protocol. Read returns the status. Read/Write
buspower Gets or sets the Power State of the bus (0 - Off or 1 - On) Read/Write
bussuspend Suspends the USB bus. Read/Write
busconnected Gets the connection status of the bus Read
gotgctl Gets or sets the Core Control Status Register. Read/Write
gusbcfg Gets or sets the Core USB Configuration Register Read/Write
grxfsiz Gets or sets the Receive FIFO Size Register Read/Write
gnptxfsiz Gets or sets the non-periodic Transmit Size Register Read/Write
gpvndctl Gets or sets the PHY Vendor Control Register Read/Write
ggpio Gets the value in the lower 16-bits of the General Purpose IO Register ++ or sets the upper 16 bits. Read/Write
guid Gets or sets the value of the User ID Register Read/Write
gsnpsid Gets the value of the Synopsys ID Regester Read
devspeed Gets or sets the device speed setting in the DCFG register Read/Write
enumspeed Gets the device enumeration Speed. Read
hptxfsiz Gets the value of the Host Periodic Transmit FIFO Read
hprt0 Gets or sets the value in the Host Port Control and Status Register Read/Write
regoffset Sets the register offset for the next Register Access Read/Write
regvalue Gets or sets the value of the register at the offset in the regoffset attribute. Read/Write
remote_wakeup On read, shows the status of Remote Wakeup. On write, initiates a remote ++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote ++ Wakeup signalling bit in the Device Control Register is set for 1 ++ milli-second. Read/Write
regdump Dumps the contents of core registers. Read
spramdump Dumps the contents of core registers. Read
hcddump Dumps the current HCD state. Read
hcd_frrem Shows the average value of the Frame Remaining ++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt ++ occurs. This can be used to determine the average interrupt latency. Also ++ shows the average Frame Remaining value for start_transfer and the "a" and ++ "b" sample points. The "a" and "b" sample points may be used during debugging ++ bto determine how long it takes to execute a section of the HCD code. Read
rd_reg_test Displays the time required to read the GNPTXFSIZ register many times ++ (the output shows the number of times the register is read). ++ Read
wr_reg_test Displays the time required to write the GNPTXFSIZ register many times ++ (the output shows the number of times the register is written). ++ Read
lpm_response Gets or sets lpm_response mode. Applicable only in device mode. ++ Write
sleep_local_dev Generetates sleep signaling. Applicable only in host mode. ++ Write
sleep_status Shows sleep status of device. ++ Read
++ ++ Example usage: ++ To get the current mode: ++ cat /sys/devices/lm0/mode ++ ++ To power down the USB: ++ echo 0 > /sys/devices/lm0/buspower ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include /* permission constants */ ++#include ++#include ++#include ++#include ++ ++ ++#ifdef LM_INTERFACE ++#include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++#include ++#else ++/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure - ++ here we use definitions stolen from arm-integrator headers ++*/ ++#include ++#endif ++#elif defined(PLATFORM_INTERFACE) ++#include ++#endif ++ ++#include ++ ++#include "dwc_os.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_hcd_if.h" ++ ++/* ++ * MACROs for defining sysfs attribute ++ */ ++#ifdef LM_INTERFACE ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++ ++#elif defined(PCI_INTERFACE) ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++ ++#elif defined(PLATFORM_INTERFACE) ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct platform_device *platform_dev = \ ++ container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val; \ ++ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ ++ __func__, _dev, platform_dev, otg_dev); \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++#endif ++ ++/* ++ * MACROs for defining sysfs attribute for 32-bit registers ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++ ++#elif defined(PLATFORM_INTERFACE) ++#include "dwc_otg_dbg.h" ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val; \ ++ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ ++ __func__, _dev, platform_dev, otg_dev); \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++ ++#endif ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++/** @name Functions for Show/Store of Attributes */ ++/**@{*/ ++ ++/** ++ * Show the register offset of the Register Access. ++ */ ++static ssize_t regoffset_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = container_of(_dev, ++ struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n", ++ otg_dev->reg_offset); ++} ++ ++/** ++ * Set the register offset for the next Register Access Read/Write ++ */ ++static ssize_t regoffset_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = container_of(_dev, ++ struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ uint32_t offset = simple_strtoul(buf, NULL, 16); ++ if (offset < SZ_256K) { ++ otg_dev->reg_offset = offset; ++ } else { ++ dev_err(_dev, "invalid offset\n"); ++ } ++ ++ return count; ++} ++ ++DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store); ++ ++/** ++ * Show the value of the register at the offset in the reg_offset ++ * attribute. ++ */ ++static ssize_t regvalue_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ uint32_t val; ++ volatile uint32_t *addr; ++ ++ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) { ++ /* Calculate the address */ ++ addr = (uint32_t *) (otg_dev->reg_offset + ++ (uint8_t *) otg_dev->base); ++ val = dwc_read_reg32(addr); ++ return snprintf(buf, ++ sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1, ++ "Reg@0x%06x = 0x%08x\n", otg_dev->reg_offset, ++ val); ++ } else { ++ dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->reg_offset); ++ return sprintf(buf, "invalid offset\n"); ++ } ++} ++ ++/** ++ * Store the value in the register at the offset in the reg_offset ++ * attribute. ++ * ++ */ ++static ssize_t regvalue_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ volatile uint32_t *addr; ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); ++ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) { ++ /* Calculate the address */ ++ addr = (uint32_t *) (otg_dev->reg_offset + ++ (uint8_t *) otg_dev->base); ++ dwc_write_reg32(addr, val); ++ } else { ++ dev_err(_dev, "Invalid Register Offset (0x%08x)\n", ++ otg_dev->reg_offset); ++ } ++ return count; ++} ++ ++DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store); ++ ++/* ++ * Attributes ++ */ ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC"); ++ ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg, ++ &(otg_dev->core_if->core_global_regs->gusbcfg), ++ "GUSBCFG"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz, ++ &(otg_dev->core_if->core_global_regs->grxfsiz), ++ "GRXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz, ++ &(otg_dev->core_if->core_global_regs->gnptxfsiz), ++ "GNPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl, ++ &(otg_dev->core_if->core_global_regs->gpvndctl), ++ "GPVNDCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio, ++ &(otg_dev->core_if->core_global_regs->ggpio), ++ "GGPIO"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid), ++ "GUID"); ++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid, ++ &(otg_dev->core_if->core_global_regs->gsnpsid), ++ "GSNPSID"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz, ++ &(otg_dev->core_if->core_global_regs->hptxfsiz), ++ "HPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0"); ++ ++/** ++ * @todo Add code to initiate the HNP. ++ */ ++/** ++ * Show the HNP status bit ++ */ ++static ssize_t hnp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ return sprintf(buf, "HstNegScs = 0x%x\n", ++ dwc_otg_get_hnpstatus(otg_dev->core_if)); ++} ++ ++/** ++ * Set the HNP Request bit ++ */ ++static ssize_t hnp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_hnpreq(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); ++ ++/** ++ * @todo Add code to initiate the SRP. ++ */ ++/** ++ * Show the SRP status bit ++ */ ++static ssize_t srp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ return sprintf(buf, "SesReqScs = 0x%x\n", ++ dwc_otg_get_srpstatus(otg_dev->core_if)); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif ++} ++ ++/** ++ * Set the SRP Request bit ++ */ ++static ssize_t srp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ dwc_otg_pcd_initiate_srp(otg_dev->pcd); ++#endif ++ return count; ++} ++ ++DEVICE_ATTR(srp, 0644, srp_show, srp_store); ++ ++/** ++ * @todo Need to do more for power on/off? ++ */ ++/** ++ * Show the Bus Power status ++ */ ++static ssize_t buspower_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ return sprintf(buf, "Bus Power = 0x%x\n", ++ dwc_otg_get_prtpower(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Bus Power status ++ */ ++static ssize_t buspower_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ uint32_t on = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_prtpower(otg_dev->core_if, on); ++ return count; ++} ++ ++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); ++ ++/** ++ * @todo Need to do more for suspend? ++ */ ++/** ++ * Show the Bus Suspend status ++ */ ++static ssize_t bussuspend_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ return sprintf(buf, "Bus Suspend = 0x%x\n", ++ dwc_otg_get_prtsuspend(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Bus Suspend status ++ */ ++static ssize_t bussuspend_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_prtsuspend(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); ++ ++/** ++ * Show the status of Remote Wakeup. ++ */ ++static ssize_t remote_wakeup_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ return sprintf(buf, ++ "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n", ++ dwc_otg_get_remotewakesig(otg_dev->core_if), ++ dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd), ++ dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if)); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif /* DWC_HOST_ONLY */ ++} ++ ++/** ++ * Initiate a remote wakeup of the host. The Device control register ++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable ++ * flag is set. ++ * ++ */ ++static ssize_t remote_wakeup_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ ++ if (val & 1) { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); ++ } else { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); ++ } ++#endif /* DWC_HOST_ONLY */ ++ return count; ++} ++ ++DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show, ++ remote_wakeup_store); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t regdump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ dwc_otg_dump_global_registers(otg_dev->core_if); ++ if (dwc_otg_is_host_mode(otg_dev->core_if)) { ++ dwc_otg_dump_host_registers(otg_dev->core_if); ++ } else { ++ dwc_otg_dump_dev_registers(otg_dev->core_if); ++ ++ } ++ return sprintf(buf, "Register Dump\n"); ++} ++ ++DEVICE_ATTR(regdump, S_IRUGO | S_IWUSR, regdump_show, 0); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t spramdump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ dwc_otg_dump_spram(otg_dev->core_if); ++ ++ return sprintf(buf, "SPRAM Dump\n"); ++} ++ ++DEVICE_ATTR(spramdump, S_IRUGO | S_IWUSR, spramdump_show, 0); ++ ++/** ++ * Dump the current hcd state. ++ */ ++static ssize_t hcddump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ dwc_otg_hcd_dump_state(otg_dev->hcd); ++#endif /* DWC_DEVICE_ONLY */ ++ return sprintf(buf, "HCD Dump\n"); ++} ++ ++DEVICE_ATTR(hcddump, S_IRUGO | S_IWUSR, hcddump_show, 0); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ */ ++static ssize_t hcd_frrem_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ dwc_otg_hcd_dump_frrem(otg_dev->hcd); ++#endif /* DWC_DEVICE_ONLY */ ++ return sprintf(buf, "HCD Dump Frame Remaining\n"); ++} ++ ++DEVICE_ATTR(hcd_frrem, S_IRUGO | S_IWUSR, hcd_frrem_show, 0); ++ ++/** ++ * Displays the time required to read the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is read). ++ */ ++#define RW_REG_COUNT 10000000 ++#define MSEC_PER_JIFFIE 1000/HZ ++static ssize_t rd_reg_test_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_otg_get_gnptxfsiz(otg_dev->core_if); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf(buf, ++ "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(rd_reg_test, S_IRUGO | S_IWUSR, rd_reg_test_show, 0); ++ ++/** ++ * Displays the time required to write the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is written). ++ */ ++static ssize_t wr_reg_test_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ uint32_t reg_val; ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf(buf, ++ "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(wr_reg_test, S_IRUGO | S_IWUSR, wr_reg_test_show, 0); ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ ++/** ++* Show the lpm_response attribute. ++*/ ++static ssize_t lpmresp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) ++ return sprintf(buf, "** LPM is DISABLED **\n"); ++ ++ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { ++ return sprintf(buf, "** Current mode is not device mode\n"); ++ } ++ return sprintf(buf, "lpm_response = %d\n", ++ dwc_otg_get_lpmresponse(otg_dev->core_if)); ++} ++ ++/** ++* Store the lpm_response attribute. ++*/ ++static ssize_t lpmresp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ ++ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) { ++ return 0; ++ } ++ ++ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { ++ return 0; ++ } ++ ++ dwc_otg_set_lpmresponse(otg_dev->core_if, val); ++ return count; ++} ++ ++DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store); ++ ++/** ++* Show the sleep_status attribute. ++*/ ++static ssize_t sleepstatus_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ ++ return sprintf(buf, "Sleep Status = %d\n", ++ dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)); ++} ++ ++/** ++ * Store the sleep_status attribure. ++ */ ++static ssize_t sleepstatus_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifdef LM_INTERFACE ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platform_dev = ++ container_of(_dev, struct platform_device, dev); ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); ++#endif ++ ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ ++ DWC_PRINTF("Host initiated resume\n"); ++ dwc_otg_set_prtresume(otg_dev->core_if, 1); ++ } ++ } ++ ++ return count; ++} ++ ++DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show, ++ sleepstatus_store); ++ ++#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */ ++ ++/**@}*/ ++ ++/** ++ * Create the device files ++ */ ++void dwc_otg_attr_create ( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ) ++ ++{ ++ int error; ++ ++ error = device_create_file(&dev->dev, &dev_attr_regoffset); ++ error = device_create_file(&dev->dev, &dev_attr_regvalue); ++ error = device_create_file(&dev->dev, &dev_attr_mode); ++ error = device_create_file(&dev->dev, &dev_attr_hnpcapable); ++ error = device_create_file(&dev->dev, &dev_attr_srpcapable); ++ error = device_create_file(&dev->dev, &dev_attr_hsic_connect); ++ error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic); ++ error = device_create_file(&dev->dev, &dev_attr_hnp); ++ error = device_create_file(&dev->dev, &dev_attr_srp); ++ error = device_create_file(&dev->dev, &dev_attr_buspower); ++ error = device_create_file(&dev->dev, &dev_attr_bussuspend); ++ error = device_create_file(&dev->dev, &dev_attr_busconnected); ++ error = device_create_file(&dev->dev, &dev_attr_gotgctl); ++ error = device_create_file(&dev->dev, &dev_attr_gusbcfg); ++ error = device_create_file(&dev->dev, &dev_attr_grxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_gpvndctl); ++ error = device_create_file(&dev->dev, &dev_attr_ggpio); ++ error = device_create_file(&dev->dev, &dev_attr_guid); ++ error = device_create_file(&dev->dev, &dev_attr_gsnpsid); ++ error = device_create_file(&dev->dev, &dev_attr_devspeed); ++ error = device_create_file(&dev->dev, &dev_attr_enumspeed); ++ error = device_create_file(&dev->dev, &dev_attr_hptxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_hprt0); ++ error = device_create_file(&dev->dev, &dev_attr_remote_wakeup); ++ error = device_create_file(&dev->dev, &dev_attr_regdump); ++ error = device_create_file(&dev->dev, &dev_attr_spramdump); ++ error = device_create_file(&dev->dev, &dev_attr_hcddump); ++ error = device_create_file(&dev->dev, &dev_attr_hcd_frrem); ++ error = device_create_file(&dev->dev, &dev_attr_rd_reg_test); ++ error = device_create_file(&dev->dev, &dev_attr_wr_reg_test); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ error = device_create_file(&dev->dev, &dev_attr_lpm_response); ++ error = device_create_file(&dev->dev, &dev_attr_sleep_status); ++#endif ++} ++ ++/** ++ * Remove the device files ++ */ ++void dwc_otg_attr_remove ( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ) ++ ++{ ++ device_remove_file(&dev->dev, &dev_attr_regoffset); ++ device_remove_file(&dev->dev, &dev_attr_regvalue); ++ device_remove_file(&dev->dev, &dev_attr_mode); ++ device_remove_file(&dev->dev, &dev_attr_hnpcapable); ++ device_remove_file(&dev->dev, &dev_attr_srpcapable); ++ device_remove_file(&dev->dev, &dev_attr_hsic_connect); ++ device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic); ++ device_remove_file(&dev->dev, &dev_attr_hnp); ++ device_remove_file(&dev->dev, &dev_attr_srp); ++ device_remove_file(&dev->dev, &dev_attr_buspower); ++ device_remove_file(&dev->dev, &dev_attr_bussuspend); ++ device_remove_file(&dev->dev, &dev_attr_busconnected); ++ device_remove_file(&dev->dev, &dev_attr_gotgctl); ++ device_remove_file(&dev->dev, &dev_attr_gusbcfg); ++ device_remove_file(&dev->dev, &dev_attr_grxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_gnptxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_gpvndctl); ++ device_remove_file(&dev->dev, &dev_attr_ggpio); ++ device_remove_file(&dev->dev, &dev_attr_guid); ++ device_remove_file(&dev->dev, &dev_attr_gsnpsid); ++ device_remove_file(&dev->dev, &dev_attr_devspeed); ++ device_remove_file(&dev->dev, &dev_attr_enumspeed); ++ device_remove_file(&dev->dev, &dev_attr_hptxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_hprt0); ++ device_remove_file(&dev->dev, &dev_attr_remote_wakeup); ++ device_remove_file(&dev->dev, &dev_attr_regdump); ++ device_remove_file(&dev->dev, &dev_attr_spramdump); ++ device_remove_file(&dev->dev, &dev_attr_hcddump); ++ device_remove_file(&dev->dev, &dev_attr_hcd_frrem); ++ device_remove_file(&dev->dev, &dev_attr_rd_reg_test); ++ device_remove_file(&dev->dev, &dev_attr_wr_reg_test); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ device_remove_file(&dev->dev, &dev_attr_lpm_response); ++ device_remove_file(&dev->dev, &dev_attr_sleep_status); ++#endif ++} +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_attr.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_attr.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_attr.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_attr.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,88 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $ ++ * $Revision: #11 $ ++ * $Date: 2009/04/03 $ ++ * $Change: 1225160 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_ATTR_H__) ++#define __DWC_OTG_ATTR_H__ ++ ++/** @file ++ * This file contains the interface to the Linux device attributes. ++ */ ++extern struct device_attribute dev_attr_regoffset; ++extern struct device_attribute dev_attr_regvalue; ++ ++extern struct device_attribute dev_attr_mode; ++extern struct device_attribute dev_attr_hnpcapable; ++extern struct device_attribute dev_attr_srpcapable; ++extern struct device_attribute dev_attr_hnp; ++extern struct device_attribute dev_attr_srp; ++extern struct device_attribute dev_attr_buspower; ++extern struct device_attribute dev_attr_bussuspend; ++extern struct device_attribute dev_attr_busconnected; ++extern struct device_attribute dev_attr_gotgctl; ++extern struct device_attribute dev_attr_gusbcfg; ++extern struct device_attribute dev_attr_grxfsiz; ++extern struct device_attribute dev_attr_gnptxfsiz; ++extern struct device_attribute dev_attr_gpvndctl; ++extern struct device_attribute dev_attr_ggpio; ++extern struct device_attribute dev_attr_guid; ++extern struct device_attribute dev_attr_gsnpsid; ++extern struct device_attribute dev_attr_devspeed; ++extern struct device_attribute dev_attr_enumspeed; ++extern struct device_attribute dev_attr_hptxfsiz; ++extern struct device_attribute dev_attr_hprt0; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++extern struct device_attribute dev_attr_lpm_response; ++extern struct device_attribute dev_attr_sleep_local_dev; ++extern struct device_attribute devi_attr_sleep_status; ++#endif ++ ++void dwc_otg_attr_create ( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++ ++void dwc_otg_attr_remove ( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++#endif +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cfi.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cfi.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cfi.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cfi.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,1876 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * This file contains the most of the CFI implementation for the OTG. ++ */ ++ ++#ifdef DWC_UTE_CFI ++ ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_cfi.h" ++ ++/** This definition should actually migrate to the Portability Library */ ++#define DWC_CONSTANT_CPU_TO_LE16(x) (x) ++ ++extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex); ++ ++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen); ++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, ++ struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req); ++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd); ++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep); ++ ++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if); ++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue); ++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue); ++ ++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if); ++ ++/** This is the header of the all features descriptor */ ++static cfi_all_features_header_t all_props_desc_header = { ++ .wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100), ++ .wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG), ++ .wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9), ++}; ++ ++/** This is an array of statically allocated feature descriptors */ ++static cfi_feature_desc_header_t prop_descs[] = { ++ ++ /* FT_ID_DMA_MODE */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1), ++ }, ++ ++ /* FT_ID_DMA_BUFFER_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DMA_BUFF_ALIGN */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_DMA_CONCAT_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ //.wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DMA_CIRCULAR */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_THRESHOLD_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DFIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RO, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_TX_FIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_RX_FIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ } ++}; ++ ++/** The table of feature names */ ++cfi_string_t prop_name_table[] = { ++ {FT_ID_DMA_MODE, "dma_mode"}, ++ {FT_ID_DMA_BUFFER_SETUP, "buffer_setup"}, ++ {FT_ID_DMA_BUFF_ALIGN, "buffer_align"}, ++ {FT_ID_DMA_CONCAT_SETUP, "concat_setup"}, ++ {FT_ID_DMA_CIRCULAR, "buffer_circular"}, ++ {FT_ID_THRESHOLD_SETUP, "threshold_setup"}, ++ {FT_ID_DFIFO_DEPTH, "dfifo_depth"}, ++ {FT_ID_TX_FIFO_DEPTH, "txfifo_depth"}, ++ {FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"}, ++ {} ++}; ++ ++/************************************************************************/ ++ ++/** ++ * Returns the name of the feature by its ID ++ * or NULL if no featute ID matches. ++ * ++ */ ++const uint8_t *get_prop_name(uint16_t prop_id, int *len) ++{ ++ cfi_string_t *pstr; ++ *len = 0; ++ ++ for (pstr = prop_name_table; pstr && pstr->s; pstr++) { ++ if (pstr->id == prop_id) { ++ *len = DWC_STRLEN(pstr->s); ++ return pstr->s; ++ } ++ } ++ return NULL; ++} ++ ++/** ++ * This function handles all CFI specific control requests. ++ * ++ * Return a negative value to stall the DCE. ++ */ ++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl) ++{ ++ int retval = 0; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ cfiobject_t *cfi = pcd->cfi; ++ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); ++ uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength); ++ uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue); ++ uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex); ++ uint32_t regaddr = 0; ++ uint32_t regval = 0; ++ ++ /* Save this Control Request in the CFI object. ++ * The data field will be assigned in the data stage completion CB function. ++ */ ++ cfi->ctrl_req = *ctrl; ++ cfi->ctrl_req.data = NULL; ++ ++ cfi->need_gadget_att = 0; ++ cfi->need_status_in_complete = 0; ++ ++ switch (ctrl->bRequest) { ++ case VEN_CORE_GET_FEATURES: ++ retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN); ++ if (retval >= 0) { ++ //dump_msg(cfi->buf_in.buf, retval); ++ ep = &pcd->ep0; ++ ++ retval = min((uint16_t) retval, wLen); ++ /* Transfer this buffer to the host through the EP0-IN EP */ ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = retval; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ } ++ retval = 0; ++ break; ++ ++ case VEN_CORE_GET_FEATURE: ++ CFI_INFO("VEN_CORE_GET_FEATURE\n"); ++ retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN, ++ pcd, ctrl); ++ if (retval >= 0) { ++ ep = &pcd->ep0; ++ ++ retval = min((uint16_t) retval, wLen); ++ /* Transfer this buffer to the host through the EP0-IN EP */ ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = retval; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ } ++ CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval); ++ dump_msg(cfi->buf_in.buf, retval); ++ break; ++ ++ case VEN_CORE_SET_FEATURE: ++ CFI_INFO("VEN_CORE_SET_FEATURE\n"); ++ /* Set up an XFER to get the data stage of the control request, ++ * which is the new value of the feature to be modified. ++ */ ++ ep = &pcd->ep0; ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.dma_addr = cfi->buf_out.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ /* Read the control write's data stage */ ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ retval = 0; ++ break; ++ ++ case VEN_CORE_RESET_FEATURES: ++ CFI_INFO("VEN_CORE_RESET_FEATURES\n"); ++ cfi->need_gadget_att = 1; ++ cfi->need_status_in_complete = 1; ++ retval = cfi_preproc_reset(pcd, ctrl); ++ CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval); ++ break; ++ ++ case VEN_CORE_ACTIVATE_FEATURES: ++ CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n"); ++ break; ++ ++ case VEN_CORE_READ_REGISTER: ++ CFI_INFO("VEN_CORE_READ_REGISTER\n"); ++ /* wValue optionally contains the HI WORD of the register offset and ++ * wIndex contains the LOW WORD of the register offset ++ */ ++ if (wValue == 0) { ++ /* @TODO - MAS - fix the access to the base field */ ++ regaddr = 0; ++ //regaddr = (uint32_t) pcd->otg_dev->base; ++ //GET_CORE_IF(pcd)->co ++ regaddr |= wIndex; ++ } else { ++ regaddr = (wValue << 16) | wIndex; ++ } ++ ++ /* Read a 32-bit value of the memory at the regaddr */ ++ regval = dwc_read_reg32((uint32_t *) regaddr); ++ ++ ep = &pcd->ep0; ++ dwc_memcpy(cfi->buf_in.buf, ®val, sizeof(uint32_t)); ++ ep->dwc_ep.is_in = 1; ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ cfi->need_gadget_att = 0; ++ retval = 0; ++ break; ++ ++ case VEN_CORE_WRITE_REGISTER: ++ CFI_INFO("VEN_CORE_WRITE_REGISTER\n"); ++ /* Set up an XFER to get the data stage of the control request, ++ * which is the new value of the register to be modified. ++ */ ++ ep = &pcd->ep0; ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.dma_addr = cfi->buf_out.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ /* Read the control write's data stage */ ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ retval = 0; ++ break; ++ ++ default: ++ retval = -DWC_E_NOT_SUPPORTED; ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function prepares the core features descriptors and copies its ++ * raw representation into the buffer . ++ * ++ * The buffer structure is as follows: ++ * all_features_header (8 bytes) ++ * features_#1 (8 bytes + feature name string length) ++ * features_#2 (8 bytes + feature name string length) ++ * ..... ++ * features_#n - where n=the total count of feature descriptors ++ */ ++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen) ++{ ++ cfi_feature_desc_header_t *prop_hdr = prop_descs; ++ cfi_feature_desc_header_t *prop; ++ cfi_all_features_header_t *all_props_hdr = &all_props_desc_header; ++ cfi_all_features_header_t *tmp; ++ uint8_t *tmpbuf = buf; ++ const uint8_t *pname = NULL; ++ int i, j, namelen = 0, totlen; ++ ++ /* Prepare and copy the core features into the buffer */ ++ CFI_INFO("%s:\n", __func__); ++ ++ tmp = (cfi_all_features_header_t *) tmpbuf; ++ *tmp = *all_props_hdr; ++ tmpbuf += CFI_ALL_FEATURES_HDR_LEN; ++ ++ j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t); ++ for (i = 0; i < j; i++, prop_hdr++) { ++ pname = get_prop_name(prop_hdr->wFeatureID, &namelen); ++ prop = (cfi_feature_desc_header_t *) tmpbuf; ++ *prop = *prop_hdr; ++ ++ prop->bNameLen = namelen; ++ prop->wLength = ++ DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN + ++ namelen); ++ ++ tmpbuf += CFI_FEATURE_DESC_HDR_LEN; ++ dwc_memcpy(tmpbuf, pname, namelen); ++ tmpbuf += namelen; ++ } ++ ++ totlen = tmpbuf - buf; ++ ++ if (totlen > 0) { ++ tmp = (cfi_all_features_header_t *) buf; ++ tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen); ++ } ++ ++ return totlen; ++} ++ ++/** ++ * This function releases all the dynamic memory in the CFI object. ++ */ ++static void cfi_release(cfiobject_t * cfiobj) ++{ ++ cfi_ep_t *cfiep; ++ dwc_list_link_t *tmp; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ if (cfiobj->buf_in.buf) { ++ dwc_dma_free(CFI_IN_BUF_LEN, cfiobj->buf_in.buf, ++ cfiobj->buf_in.addr); ++ cfiobj->buf_in.buf = NULL; ++ } ++ ++ if (cfiobj->buf_out.buf) { ++ dwc_dma_free(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf, ++ cfiobj->buf_out.addr); ++ cfiobj->buf_out.buf = NULL; ++ } ++ ++ /* Free the Buffer Setup values for each EP */ ++ //list_for_each_entry(cfiep, &cfiobj->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ cfi_free_ep_bs_dyn_data(cfiep); ++ } ++} ++ ++/** ++ * This function frees the dynamically allocated EP buffer setup data. ++ */ ++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep) ++{ ++ if (cfiep->bm_sg) { ++ dwc_free(cfiep->bm_sg); ++ cfiep->bm_sg = NULL; ++ } ++ ++ if (cfiep->bm_align) { ++ dwc_free(cfiep->bm_align); ++ cfiep->bm_align = NULL; ++ } ++ ++ if (cfiep->bm_concat) { ++ if (NULL != cfiep->bm_concat->wTxBytes) { ++ dwc_free(cfiep->bm_concat->wTxBytes); ++ cfiep->bm_concat->wTxBytes = NULL; ++ } ++ dwc_free(cfiep->bm_concat); ++ cfiep->bm_concat = NULL; ++ } ++} ++ ++/** ++ * This function initializes the default values of the features ++ * for a specific endpoint and should be called only once when ++ * the EP is enabled first time. ++ */ ++static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep) ++{ ++ int retval = 0; ++ ++ cfiep->bm_sg = dwc_alloc(sizeof(ddma_sg_buffer_setup_t)); ++ if (NULL == cfiep->bm_sg) { ++ CFI_INFO("Failed to allocate memory for SG feature value\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ ++ /* For the Concatenation feature's default value we do not allocate ++ * memory for the wTxBytes field - it will be done in the set_feature_value ++ * request handler. ++ */ ++ cfiep->bm_concat = dwc_alloc(sizeof(ddma_concat_buffer_setup_t)); ++ if (NULL == cfiep->bm_concat) { ++ CFI_INFO ++ ("Failed to allocate memory for CONCATENATION feature value\n"); ++ dwc_free(cfiep->bm_sg); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); ++ ++ cfiep->bm_align = dwc_alloc(sizeof(ddma_align_buffer_setup_t)); ++ if (NULL == cfiep->bm_align) { ++ CFI_INFO ++ ("Failed to allocate memory for Alignment feature value\n"); ++ dwc_free(cfiep->bm_sg); ++ dwc_free(cfiep->bm_concat); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t)); ++ ++ return retval; ++} ++ ++/** ++ * The callback function that notifies the CFI on the activation of ++ * an endpoint in the PCD. The following steps are done in this function: ++ * ++ * Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's ++ * active endpoint) ++ * Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP ++ * Set the Buffer Mode to standard ++ * Initialize the default values for all EP modes (SG, Circular, Concat, Align) ++ * Add the cfi_ep_t object to the list of active endpoints in the CFI object ++ */ ++static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep) ++{ ++ cfi_ep_t *cfiep; ++ int retval = -DWC_E_NOT_SUPPORTED; ++ ++ CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__, ++ "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress); ++ /* MAS - Check whether this endpoint already is in the list */ ++ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); ++ ++ if (NULL == cfiep) { ++ /* Allocate a cfi_ep_t object */ ++ cfiep = dwc_alloc(sizeof(cfi_ep_t)); ++ if (NULL == cfiep) { ++ CFI_INFO ++ ("Unable to allocate memory for in function %s\n", ++ __func__); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep, 0, sizeof(cfi_ep_t)); ++ ++ /* Save the dwc_otg_pcd_ep pointer in the cfiep object */ ++ cfiep->ep = ep; ++ ++ /* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */ ++ ep->dwc_ep.descs = ++ dwc_dma_alloc(MAX_DMA_DESCS_PER_EP * ++ sizeof(dwc_otg_dma_desc_t), ++ &ep->dwc_ep.descs_dma_addr); ++ ++ if (NULL == ep->dwc_ep.descs) { ++ dwc_free(cfiep); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_LIST_INIT(&cfiep->lh); ++ ++ /* Set the buffer mode to BM_STANDARD. It will be modified ++ * when building descriptors for a specific buffer mode */ ++ ep->dwc_ep.buff_mode = BM_STANDARD; ++ ++ /* Create and initialize the default values for this EP's Buffer modes */ ++ if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0) ++ return retval; ++ ++ /* Add the cfi_ep_t object to the CFI object's list of active endpoints */ ++ DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh); ++ retval = 0; ++ } else { /* The sought EP already is in the list */ ++ CFI_INFO("%s: The sought EP already is in the list\n", ++ __func__); ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function is called when the data stage of a 3-stage Control Write request ++ * is complete. ++ * ++ */ ++static int cfi_ctrl_write_complete(struct cfiobject *cfi, ++ struct dwc_otg_pcd *pcd) ++{ ++ uint32_t addr, reg_value; ++ uint16_t wIndex, wValue; ++ uint8_t bRequest; ++ uint8_t *buf = cfi->buf_out.buf; ++ //struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved; ++ struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req; ++ int retval = -DWC_E_NOT_SUPPORTED; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ bRequest = ctrl_req->bRequest; ++ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); ++ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); ++ ++ /* ++ * Save the pointer to the data stage in the ctrl_req's field. ++ * The request should be already saved in the command stage by now. ++ */ ++ ctrl_req->data = cfi->buf_out.buf; ++ cfi->need_status_in_complete = 0; ++ cfi->need_gadget_att = 0; ++ ++ switch (bRequest) { ++ case VEN_CORE_WRITE_REGISTER: ++ /* The buffer contains raw data of the new value for the register */ ++ reg_value = *((uint32_t *) buf); ++ if (wValue == 0) { ++ addr = 0; ++ //addr = (uint32_t) pcd->otg_dev->base; ++ addr += wIndex; ++ } else { ++ addr = (wValue << 16) | wIndex; ++ } ++ ++ //writel(reg_value, addr); ++ ++ retval = 0; ++ cfi->need_status_in_complete = 1; ++ break; ++ ++ case VEN_CORE_SET_FEATURE: ++ /* The buffer contains raw data of the new value of the feature */ ++ retval = cfi_set_feature_value(pcd); ++ if (retval < 0) ++ return retval; ++ ++ cfi->need_status_in_complete = 1; ++ break; ++ ++ default: ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function builds the DMA descriptors for the SG buffer mode. ++ */ ++static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ int i; ++ uint32_t txsize, off; ++ ++ txsize = sgval->wSize; ++ off = sgval->bOffset; ++ ++// CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n", ++// __func__, cfiep->ep->ep.name, txsize, off); ++ ++ for (i = 0; i < sgval->bCount; i++) { ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->buf = buff_addr; ++ desc->status.b.l = 0; ++ desc->status.b.ioc = 0; ++ desc->status.b.sp = 0; ++ desc->status.b.bytes = txsize; ++ desc->status.b.bs = BS_HOST_READY; ++ ++ /* Set the next address of the buffer */ ++ buff_addr += txsize + off; ++ desc_last = desc; ++ desc++; ++ } ++ ++ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ ++ desc_last->status.b.l = 1; ++ desc_last->status.b.ioc = 1; ++ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; ++ /* Save the last DMA descriptor pointer */ ++ cfiep->dma_desc_last = desc_last; ++ cfiep->desc_count = sgval->bCount; ++} ++ ++/** ++ * This function builds the DMA descriptors for the Concatenation buffer mode. ++ */ ++static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ int i; ++ uint16_t *txsize; ++ ++ txsize = concatval->wTxBytes; ++ ++ for (i = 0; i < concatval->hdr.bDescCount; i++) { ++ desc->buf = buff_addr; ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->status.b.l = 0; ++ desc->status.b.ioc = 0; ++ desc->status.b.sp = 0; ++ desc->status.b.bytes = *txsize; ++ desc->status.b.bs = BS_HOST_READY; ++ ++ txsize++; ++ /* Set the next address of the buffer */ ++ buff_addr += UGETW(ep->desc->wMaxPacketSize); ++ desc_last = desc; ++ desc++; ++ } ++ ++ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ ++ desc_last->status.b.l = 1; ++ desc_last->status.b.ioc = 1; ++ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; ++ cfiep->dma_desc_last = desc_last; ++ cfiep->desc_count = concatval->hdr.bDescCount; ++} ++ ++/** ++ * This function builds the DMA descriptors for the Circular buffer mode ++ */ ++static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ /* @todo: MAS - add implementation when this feature needs to be tested */ ++} ++ ++/** ++ * This function builds the DMA descriptors for the Alignment buffer mode ++ */ ++static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_align_buffer_setup_t *alignval = cfiep->bm_align; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->status.b.l = 1; ++ desc->status.b.ioc = 1; ++ desc->status.b.sp = ep->dwc_ep.sent_zlp; ++ desc->status.b.bytes = req->length; ++ /* Adjust the buffer alignment */ ++ desc->buf = (buff_addr + alignval->bAlign); ++ desc->status.b.bs = BS_HOST_READY; ++ cfiep->dma_desc_last = desc; ++ cfiep->desc_count = 1; ++} ++ ++/** ++ * This function builds the DMA descriptors chain for different modes of the ++ * buffer setup of an endpoint. ++ */ ++static void cfi_build_descriptors(struct cfiobject *cfi, ++ struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep, ++ dwc_otg_pcd_request_t * req) ++{ ++ cfi_ep_t *cfiep; ++ ++ /* Get the cfiep by the dwc_otg_pcd_ep */ ++ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Unable to find a matching active endpoint\n", ++ __func__); ++ return; ++ } ++ ++ cfiep->xfer_len = req->length; ++ ++ /* Iterate through all the DMA descriptors */ ++ switch (cfiep->ep->dwc_ep.buff_mode) { ++ case BM_SG: ++ cfi_build_sg_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_CONCAT: ++ cfi_build_concat_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_CIRCULAR: ++ cfi_build_circ_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_ALIGN: ++ cfi_build_align_descs(cfi, cfiep, req); ++ break; ++ ++ default: ++ break; ++ } ++} ++ ++/** ++ * Allocate DMA buffer for different Buffer modes. ++ */ ++static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep, dma_addr_t * dma, ++ unsigned size, gfp_t flags) ++{ ++ return dwc_dma_alloc(size, dma); ++} ++ ++/** ++ * This function initializes the CFI object. ++ */ ++int init_cfi(cfiobject_t * cfiobj) ++{ ++ CFI_INFO("%s\n", __func__); ++ ++ /* Allocate a buffer for IN XFERs */ ++ cfiobj->buf_in.buf = ++ dwc_dma_alloc(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr); ++ if (NULL == cfiobj->buf_in.buf) { ++ CFI_INFO("Unable to allocate buffer for INs\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Allocate a buffer for OUT XFERs */ ++ cfiobj->buf_out.buf = ++ dwc_dma_alloc(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr); ++ if (NULL == cfiobj->buf_out.buf) { ++ CFI_INFO("Unable to allocate buffer for OUT\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Initialize the callback function pointers */ ++ cfiobj->ops.release = cfi_release; ++ cfiobj->ops.ep_enable = cfi_ep_enable; ++ cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete; ++ cfiobj->ops.build_descriptors = cfi_build_descriptors; ++ cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf; ++ ++ /* Initialize the list of active endpoints in the CFI object */ ++ DWC_LIST_INIT(&cfiobj->active_eps); ++ ++ return 0; ++} ++ ++/** ++ * This function reads the required feature's current value into the buffer ++ * ++ * @retval: Returns negative as error, or the data length of the feature ++ */ ++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, ++ struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); ++ uint16_t dfifo, rxfifo, txfifo; ++ ++ switch (ctrl_req->wIndex) { ++ /* Whether the DDMA is enabled or not */ ++ case FT_ID_DMA_MODE: ++ *buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0; ++ retval = 1; ++ break; ++ ++ case FT_ID_DMA_BUFFER_SETUP: ++ retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ retval = cfi_ep_get_align_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_CIRCULAR: ++ CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n"); ++ break; ++ ++ case FT_ID_THRESHOLD_SETUP: ++ CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n"); ++ break; ++ ++ case FT_ID_DFIFO_DEPTH: ++ dfifo = get_dfifo_size(coreif); ++ *((uint16_t *) buf) = dfifo; ++ retval = sizeof(uint16_t); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ retval = get_txfifo_size(pcd, ctrl_req->wValue); ++ if (retval >= 0) { ++ txfifo = retval; ++ *((uint16_t *) buf) = txfifo; ++ retval = sizeof(uint16_t); ++ } ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ retval = get_rxfifo_size(coreif, ctrl_req->wValue); ++ if (retval >= 0) { ++ rxfifo = retval; ++ *((uint16_t *) buf) = rxfifo; ++ retval = sizeof(uint16_t); ++ } ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function resets the SG for the specified EP to its default value ++ */ ++static int cfi_reset_sg_val(cfi_ep_t * cfiep) ++{ ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets the Alignment for the specified EP to its default value ++ */ ++static int cfi_reset_align_val(cfi_ep_t * cfiep) ++{ ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets the Concatenation for the specified EP to its default value ++ * This function will also set the value of the wTxBytes field to NULL after ++ * freeing the memory previously allocated for this field. ++ */ ++static int cfi_reset_concat_val(cfi_ep_t * cfiep) ++{ ++ /* First we need to free the wTxBytes field */ ++ if (cfiep->bm_concat->wTxBytes) { ++ dwc_free(cfiep->bm_concat->wTxBytes); ++ cfiep->bm_concat->wTxBytes = NULL; ++ } ++ ++ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets all the buffer setups of the specified endpoint ++ */ ++static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep) ++{ ++ cfi_reset_sg_val(cfiep); ++ cfi_reset_align_val(cfiep); ++ cfi_reset_concat_val(cfiep); ++ return 0; ++} ++ ++static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr, ++ uint8_t rx_rst, uint8_t tx_rst) ++{ ++ int retval = -DWC_E_INVALID; ++ uint16_t tx_siz[15]; ++ uint16_t rx_siz = 0; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ ++ if (rx_rst) { ++ rx_siz = params->dev_rx_fifo_size; ++ params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz; ++ } ++ ++ if (tx_rst) { ++ if (ep_addr == 0) { ++ int i; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ tx_siz[i] = ++ core_if->core_params->dev_tx_fifo_size[i]; ++ core_if->core_params->dev_tx_fifo_size[i] = ++ core_if->init_txfsiz[i]; ++ } ++ } else { ++ ++ ep = get_ep_by_addr(pcd, ep_addr); ++ ++ if (NULL == ep) { ++ CFI_INFO ++ ("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, ep_addr); ++ return -DWC_E_INVALID; ++ } ++ ++ tx_siz[0] = ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - ++ 1]; ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = ++ GET_CORE_IF(pcd)->init_txfsiz[ep->dwc_ep. ++ tx_fifo_num - 1]; ++ } ++ } ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO ++ ("%s: Error resetting the feature Reset All(FIFO size)\n", ++ __func__); ++ if (rx_rst) { ++ params->dev_rx_fifo_size = rx_siz; ++ } ++ ++ if (tx_rst) { ++ if (ep_addr == 0) { ++ int i; ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++ i++) { ++ core_if->core_params-> ++ dev_tx_fifo_size[i] = tx_siz[i]; ++ } ++ } else { ++ params->dev_tx_fifo_size[ep->dwc_ep. ++ tx_fifo_num - 1] = ++ tx_siz[0]; ++ } ++ } ++ retval = -DWC_E_INVALID; ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1); ++ if (retval < 0) { ++ return retval; ++ } ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_ep_reset_all_setup_vals(cfiep); ++ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_ep_reset_all_setup_vals(cfiep); ++ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Reset All\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd, ++ uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_sg_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_sg_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Buffer Setup\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_concat_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_concat_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Concatenation Value\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_align_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_align_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Aliignment Value\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++ ++} ++ ++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = 0; ++ ++ switch (req->wIndex) { ++ case 0: ++ /* Reset all features */ ++ retval = cfi_handle_reset_all(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_BUFFER_SETUP: ++ /* Reset the SG buffer setup */ ++ retval = ++ cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ /* Reset the Concatenation buffer setup */ ++ retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ /* Reset the Alignment buffer setup */ ++ retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ retval = ++ cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1); ++ pcd->cfi->need_gadget_att = 0; ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0); ++ pcd->cfi->need_gadget_att = 0; ++ break; ++ default: ++ break; ++ } ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the SG buffer setup. ++ */ ++static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ uint8_t inaddr, outaddr; ++ cfi_ep_t *epin, *epout; ++ ddma_sg_buffer_setup_t *psgval; ++ uint32_t desccount, size; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ psgval = (ddma_sg_buffer_setup_t *) buf; ++ desccount = (uint32_t) psgval->bCount; ++ size = (uint32_t) psgval->wSize; ++ ++ /* Check the DMA descriptor count */ ++ if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) { ++ CFI_INFO ++ ("%s: The count of DMA Descriptors should be between 1 and %d\n", ++ __func__, MAX_DMA_DESCS_PER_EP); ++ return -DWC_E_INVALID; ++ } ++ ++ /* Check the DMA descriptor count */ ++ ++ if (size == 0) { ++ ++ CFI_INFO("%s: The transfer size should be at least 1 byte\n", ++ __func__); ++ ++ return -DWC_E_INVALID; ++ ++ } ++ ++ inaddr = psgval->bInEndpointAddress; ++ outaddr = psgval->bOutEndpointAddress; ++ ++ epin = get_cfi_ep_by_addr(pcd->cfi, inaddr); ++ epout = get_cfi_ep_by_addr(pcd->cfi, outaddr); ++ ++ if (NULL == epin || NULL == epout) { ++ CFI_INFO ++ ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n", ++ __func__, inaddr, outaddr); ++ return -DWC_E_INVALID; ++ } ++ ++ epin->ep->dwc_ep.buff_mode = BM_SG; ++ dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); ++ ++ epout->ep->dwc_ep.buff_mode = BM_SG; ++ dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); ++ ++ return 0; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ cfi_ep_t *ep; ++ uint8_t addr; ++ ddma_align_buffer_setup_t *palignval; ++ ++ palignval = (ddma_align_buffer_setup_t *) buf; ++ addr = palignval->bEndpointAddress; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ ++ ep->ep->dwc_ep.buff_mode = BM_ALIGN; ++ dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t)); ++ ++ return 0; ++} ++ ++/** ++ * This function sets a new value for the Concatenation buffer setup. ++ */ ++static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ uint8_t addr; ++ cfi_ep_t *ep; ++ struct _ddma_concat_buffer_setup_hdr *pConcatValHdr; ++ uint16_t *pVals; ++ uint32_t desccount; ++ int i; ++ uint16_t mps; ++ ++ pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf; ++ desccount = (uint32_t) pConcatValHdr->bDescCount; ++ pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN); ++ ++ /* Check the DMA descriptor count */ ++ if (desccount > MAX_DMA_DESCS_PER_EP) { ++ CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n", ++ __func__, MAX_DMA_DESCS_PER_EP); ++ return -DWC_E_INVALID; ++ } ++ ++ addr = pConcatValHdr->bEndpointAddress; ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ ++ mps = UGETW(ep->ep->desc->wMaxPacketSize); ++ ++#if 0 ++ for (i = 0; i < desccount; i++) { ++ CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]); ++ } ++ CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps); ++#endif ++ ++ /* Check the wTxSizes to be less than or equal to the mps */ ++ for (i = 0; i < desccount; i++) { ++ if (pVals[i] > mps) { ++ CFI_INFO ++ ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n", ++ __func__, i, pVals[i]); ++ return -DWC_E_INVALID; ++ } ++ } ++ ++ ep->ep->dwc_ep.buff_mode = BM_CONCAT; ++ dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN); ++ ++ /* Free the previously allocated storage for the wTxBytes */ ++ if (ep->bm_concat->wTxBytes) { ++ dwc_free(ep->bm_concat->wTxBytes); ++ } ++ ++ /* Allocate a new storage for the wTxBytes field */ ++ ep->bm_concat->wTxBytes = ++ dwc_alloc(sizeof(uint16_t) * pConcatValHdr->bDescCount); ++ if (NULL == ep->bm_concat->wTxBytes) { ++ CFI_INFO("%s: Unable to allocate memory\n", __func__); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Copy the new values into the wTxBytes filed */ ++ dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN, ++ sizeof(uint16_t) * pConcatValHdr->bDescCount); ++ ++ return 0; ++} ++ ++/** ++ * This function calculates the total of all FIFO sizes ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint16_t dfifo_total = 0; ++ int i; ++ ++ /* The shared RxFIFO size */ ++ dfifo_total = ++ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; ++ ++ /* Add up each TxFIFO size to the total */ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dfifo_total += params->dev_tx_fifo_size[i]; ++ } ++ ++ return dfifo_total; ++} ++ ++/** ++ * This function returns Rx FIFO size ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue) ++{ ++ switch (wValue >> 8) { ++ case 0: ++ return (core_if->pwron_rxfsiz < ++ 32768) ? core_if->pwron_rxfsiz : 32768; ++ break; ++ case 1: ++ return core_if->core_params->dev_rx_fifo_size; ++ break; ++ default: ++ return -DWC_E_INVALID; ++ break; ++ } ++} ++ ++/** ++ * This function returns Tx FIFO size for IN EP ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_ep_by_addr(pcd, wValue & 0xff); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, wValue & 0xff); ++ return -DWC_E_INVALID; ++ } ++ ++ if (!ep->dwc_ep.is_in) { ++ CFI_INFO ++ ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n", ++ __func__, wValue & 0xff); ++ return -DWC_E_INVALID; ++ } ++ ++ switch (wValue >> 8) { ++ case 0: ++ return (GET_CORE_IF(pcd)-> ++ pwron_txfsiz[ep->dwc_ep.tx_fifo_num - 1] < ++ 768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep->dwc_ep. ++ tx_fifo_num - ++ 1] : 32768; ++ break; ++ case 1: ++ return GET_CORE_IF(pcd)->core_params->dev_tx_fifo_size[ep-> ++ dwc_ep. ++ num - 1]; ++ break; ++ default: ++ return -DWC_E_INVALID; ++ break; ++ } ++} ++ ++/** ++ * This function checks if the submitted combination of ++ * device mode FIFO sizes is possible or not. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return 1 if possible, 0 otherwise. ++ * ++ */ ++static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if) ++{ ++ uint16_t dfifo_actual = 0; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint16_t start_addr = 0; ++ int i; ++ ++ dfifo_actual = ++ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dfifo_actual += params->dev_tx_fifo_size[i]; ++ } ++ ++ if (dfifo_actual > core_if->total_fifo_size) { ++ return 0; ++ } ++ ++ if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16) ++ return 0; ++ ++ if (params->dev_nperio_tx_fifo_size > 32768 ++ || params->dev_nperio_tx_fifo_size < 16) ++ return 0; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ if (params->dev_tx_fifo_size[i] > 768 ++ || params->dev_tx_fifo_size[i] < 4) ++ return 0; ++ } ++ ++ if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz) ++ return 0; ++ start_addr = params->dev_rx_fifo_size; ++ ++ if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz) ++ return 0; ++ start_addr += params->dev_nperio_tx_fifo_size; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i]) ++ return 0; ++ start_addr += params->dev_tx_fifo_size[i]; ++ } ++ ++ return 1; ++} ++ ++/** ++ * This function resizes Device mode FIFOs ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return 1 if successful, 0 otherwise ++ * ++ */ ++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize[15]; ++ ++ uint32_t rx_fsz_bak; ++ uint32_t nptxfsz_bak; ++ uint32_t txfsz_bak[15]; ++ ++ uint16_t start_address; ++ uint8_t retval = 1; ++ ++ if (!check_fifo_sizes(core_if)) { ++ return 0; ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ rx_fsz_bak = dwc_read_reg32(&global_regs->grxfsiz); ++ rx_fifo_size = params->dev_rx_fifo_size; ++ dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dptxfsiz_dieptxf array run from 0 to 14. ++ */ ++ ++ /* Non-periodic Tx FIFO */ ++ nptxfsz_bak = dwc_read_reg32(&global_regs->gnptxfsiz); ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ start_address = params->dev_rx_fifo_size; ++ nptxfifosize.b.startaddr = start_address; ++ ++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ ++ start_address += nptxfifosize.b.depth; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ txfsz_bak[i] = ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]); ++ ++ txfifosize[i].b.depth = params->dev_tx_fifo_size[i]; ++ txfifosize[i].b.startaddr = start_address; ++ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i], ++ txfifosize[i].d32); ++ ++ start_address += txfifosize[i].b.depth; ++ } ++ ++ /** Check if register values are set correctly */ ++ if (rx_fifo_size != dwc_read_reg32(&global_regs->grxfsiz)) { ++ retval = 0; ++ } ++ ++ if (nptxfifosize.d32 != dwc_read_reg32(&global_regs->gnptxfsiz)) { ++ retval = 0; ++ } ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ if (txfifosize[i].d32 != ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])) { ++ retval = 0; ++ } ++ } ++ ++ /** If register values are not set correctly, reset old values */ ++ if (retval == 0) { ++ dwc_write_reg32(&global_regs->grxfsiz, rx_fsz_bak); ++ ++ /* Non-periodic Tx FIFO */ ++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfsz_bak); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dwc_write_reg32(&global_regs-> ++ dptxfsiz_dieptxf[i], ++ txfsz_bak[i]); ++ } ++ } ++ } else { ++ return 0; ++ } ++ ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) ++{ ++ int retval; ++ uint32_t fsiz; ++ uint16_t size; ++ uint16_t ep_addr; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ tx_fifo_size_setup_t *ptxfifoval; ++ ++ ptxfifoval = (tx_fifo_size_setup_t *) buf; ++ ep_addr = ptxfifoval->bEndpointAddress; ++ size = ptxfifoval->wDepth; ++ ++ ep = get_ep_by_addr(pcd, ep_addr); ++ ++ CFI_INFO ++ ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n", ++ __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, ep_addr); ++ return -DWC_E_INVALID; ++ } ++ ++ fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1]; ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size; ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO ++ ("%s: Error setting the feature Tx FIFO Size for EP%d\n", ++ __func__, ep_addr); ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz; ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) ++{ ++ int retval; ++ uint32_t fsiz; ++ uint16_t size; ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ rx_fifo_size_setup_t *prxfifoval; ++ ++ prxfifoval = (rx_fifo_size_setup_t *) buf; ++ size = prxfifoval->wDepth; ++ ++ fsiz = params->dev_rx_fifo_size; ++ params->dev_rx_fifo_size = size; ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO("%s: Error setting the feature Rx FIFO Size\n", ++ __func__); ++ params->dev_rx_fifo_size = fsiz; ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function reads the SG of an EP's buffer setup into the buffer buf ++ */ ++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN); ++ retval = BS_SG_VAL_DESC_LEN; ++ return retval; ++} ++ ++/** ++ * This function reads the Concatenation value of an EP's buffer mode into ++ * the buffer buf ++ */ ++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ uint8_t desc_count; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ /* Copy the header to the buffer */ ++ dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN); ++ /* Advance the buffer pointer by the header size */ ++ buf += BS_CONCAT_VAL_HDR_LEN; ++ ++ desc_count = ep->bm_concat->hdr.bDescCount; ++ /* Copy alll the wTxBytes to the buffer */ ++ dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count); ++ ++ retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count; ++ return retval; ++} ++ ++/** ++ * This function reads the buffer Alignment value of an EP's buffer mode into ++ * the buffer buf ++ * ++ * @return The total number of bytes copied to the buffer or negative error code. ++ */ ++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN); ++ retval = BS_ALIGN_VAL_HDR_LEN; ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the specified feature ++ * ++ * @param pcd A pointer to the PCD object ++ * ++ * @return 0 if successful, negative error code otherwise to stall the DCE. ++ */ ++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ uint16_t wIndex, wValue; ++ uint8_t bRequest; ++ struct dwc_otg_core_if *coreif; ++ cfiobject_t *cfi = pcd->cfi; ++ struct cfi_usb_ctrlrequest *ctrl_req; ++ uint8_t *buf; ++ ctrl_req = &cfi->ctrl_req; ++ ++ buf = pcd->cfi->ctrl_req.data; ++ ++ coreif = GET_CORE_IF(pcd); ++ bRequest = ctrl_req->bRequest; ++ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); ++ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); ++ ++ /* See which feature is to be modified */ ++ switch (wIndex) { ++ case FT_ID_DMA_BUFFER_SETUP: ++ /* Modify the feature */ ++ if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0) ++ return retval; ++ ++ /* And send this request to the gadget */ ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ /* Modify the feature */ ++ if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_CIRCULAR: ++ CFI_INFO("FT_ID_DMA_CIRCULAR\n"); ++ break; ++ ++ case FT_ID_THRESHOLD_SETUP: ++ CFI_INFO("FT_ID_THRESHOLD_SETUP\n"); ++ break; ++ ++ case FT_ID_DFIFO_DEPTH: ++ CFI_INFO("FT_ID_DFIFO_DEPTH\n"); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ CFI_INFO("FT_ID_TX_FIFO_DEPTH\n"); ++ if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 0; ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ CFI_INFO("FT_ID_RX_FIFO_DEPTH\n"); ++ if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 0; ++ break; ++ } ++ ++ return retval; ++} ++ ++#endif //DWC_UTE_CFI +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cfi.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cfi.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cfi.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cfi.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,319 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_CFI_H__) ++#define __DWC_OTG_CFI_H__ ++ ++#include "dwc_otg_pcd.h" ++#include "dwc_cfi_common.h" ++ ++/** ++ * @file ++ * ++ * This file contains the CFI related OTG PCD specific common constants, interfaces ++ * (functions and macros) and data structures. ++ * ++ */ ++ ++struct dwc_otg_pcd; ++struct dwc_otg_pcd_ep; ++ ++/** OTG CFI Features (properties) ID constants */ ++/** This is a request for all Core Features */ ++#define FT_ID_DMA_MODE 0x0001 ++#define FT_ID_DMA_BUFFER_SETUP 0x0002 ++#define FT_ID_DMA_BUFF_ALIGN 0x0003 ++#define FT_ID_DMA_CONCAT_SETUP 0x0004 ++#define FT_ID_DMA_CIRCULAR 0x0005 ++#define FT_ID_THRESHOLD_SETUP 0x0006 ++#define FT_ID_DFIFO_DEPTH 0x0007 ++#define FT_ID_TX_FIFO_DEPTH 0x0008 ++#define FT_ID_RX_FIFO_DEPTH 0x0009 ++ ++/**********************************************************/ ++#define CFI_INFO_DEF ++ ++#ifdef CFI_INFO_DEF ++#define CFI_INFO(fmt...) DWC_PRINTF("CFI: " fmt); ++#else ++#define CFI_INFO(fmt...) ++#endif ++ ++#define min(x,y) ({ \ ++ x < y ? x : y; }) ++ ++#define max(x,y) ({ \ ++ x > y ? x : y; }) ++ ++/** ++ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is ++ * also used for setting up a buffer for Circular DDMA. ++ */ ++struct _ddma_sg_buffer_setup { ++#define BS_SG_VAL_DESC_LEN 6 ++ /* The OUT EP address */ ++ uint8_t bOutEndpointAddress; ++ /* The IN EP address */ ++ uint8_t bInEndpointAddress; ++ /* Number of bytes to put between transfer segments (must be DWORD boundaries) */ ++ uint8_t bOffset; ++ /* The number of transfer segments (a DMA descriptors per each segment) */ ++ uint8_t bCount; ++ /* Size (in byte) of each transfer segment */ ++ uint16_t wSize; ++} __attribute__ ((packed)); ++typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t; ++ ++/** Descriptor DMA Concatenation Buffer setup structure */ ++struct _ddma_concat_buffer_setup_hdr { ++#define BS_CONCAT_VAL_HDR_LEN 4 ++ /* The endpoint for which the buffer is to be set up */ ++ uint8_t bEndpointAddress; ++ /* The count of descriptors to be used */ ++ uint8_t bDescCount; ++ /* The total size of the transfer */ ++ uint16_t wSize; ++} __attribute__ ((packed)); ++typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t; ++ ++/** Descriptor DMA Concatenation Buffer setup structure */ ++struct _ddma_concat_buffer_setup { ++ /* The SG header */ ++ ddma_concat_buffer_setup_hdr_t hdr; ++ ++ /* The XFER sizes pointer (allocated dynamically) */ ++ uint16_t *wTxBytes; ++} __attribute__ ((packed)); ++typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t; ++ ++/** Descriptor DMA Alignment Buffer setup structure */ ++struct _ddma_align_buffer_setup { ++#define BS_ALIGN_VAL_HDR_LEN 2 ++ uint8_t bEndpointAddress; ++ uint8_t bAlign; ++} __attribute__ ((packed)); ++typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t; ++ ++/** Transmit FIFO Size setup structure */ ++struct _tx_fifo_size_setup { ++ uint8_t bEndpointAddress; ++ uint16_t wDepth; ++} __attribute__ ((packed)); ++typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t; ++ ++/** Transmit FIFO Size setup structure */ ++struct _rx_fifo_size_setup { ++ uint16_t wDepth; ++} __attribute__ ((packed)); ++typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t; ++ ++/** ++ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest ++ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer ++ * to the data returned in the data stage of a 3-stage Control Write requests. ++ */ ++struct cfi_usb_ctrlrequest { ++ uint8_t bRequestType; ++ uint8_t bRequest; ++ uint16_t wValue; ++ uint16_t wIndex; ++ uint16_t wLength; ++ uint8_t *data; ++} UPACKED; ++ ++/*---------------------------------------------------------------------------*/ ++ ++/** ++ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures. ++ * This structure is used to store the buffer setup data for any ++ * enabled endpoint in the PCD. ++ */ ++struct cfi_ep { ++ /* Entry for the list container */ ++ dwc_list_link_t lh; ++ /* Pointer to the active PCD endpoint structure */ ++ struct dwc_otg_pcd_ep *ep; ++ /* The last descriptor in the chain of DMA descriptors of the endpoint */ ++ struct dwc_otg_dma_desc *dma_desc_last; ++ /* The SG feature value */ ++ ddma_sg_buffer_setup_t *bm_sg; ++ /* The Circular feature value */ ++ ddma_sg_buffer_setup_t *bm_circ; ++ /* The Concatenation feature value */ ++ ddma_concat_buffer_setup_t *bm_concat; ++ /* The Alignment feature value */ ++ ddma_align_buffer_setup_t *bm_align; ++ /* XFER length */ ++ uint32_t xfer_len; ++ /* ++ * Count of DMA descriptors currently used. ++ * The total should not exceed the MAX_DMA_DESCS_PER_EP value ++ * defined in the dwc_otg_cil.h ++ */ ++ uint32_t desc_count; ++}; ++typedef struct cfi_ep cfi_ep_t; ++ ++typedef struct cfi_dma_buff { ++#define CFI_IN_BUF_LEN 1024 ++#define CFI_OUT_BUF_LEN 1024 ++ dma_addr_t addr; ++ uint8_t *buf; ++} cfi_dma_buff_t; ++ ++struct cfiobject; ++ ++/** ++ * This is the interface for the CFI operations. ++ * ++ * @param ep_enable Called when any endpoint is enabled and activated. ++ * @param release Called when the CFI object is released and it needs to correctly ++ * deallocate the dynamic memory ++ * @param ctrl_write_complete Called when the data stage of the request is complete ++ */ ++typedef struct cfi_ops { ++ int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep); ++ void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep, dma_addr_t * dma, ++ unsigned size, gfp_t flags); ++ void (*release) (struct cfiobject * cfi); ++ int (*ctrl_write_complete) (struct cfiobject * cfi, ++ struct dwc_otg_pcd * pcd); ++ void (*build_descriptors) (struct cfiobject * cfi, ++ struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep, ++ dwc_otg_pcd_request_t * req); ++} cfi_ops_t; ++ ++struct cfiobject { ++ cfi_ops_t ops; ++ struct dwc_otg_pcd *pcd; ++ struct usb_gadget *gadget; ++ ++ /* Buffers used to send/receive CFI-related request data */ ++ cfi_dma_buff_t buf_in; ++ cfi_dma_buff_t buf_out; ++ ++ /* CFI specific Control request wrapper */ ++ struct cfi_usb_ctrlrequest ctrl_req; ++ ++ /* The list of active EP's in the PCD of type cfi_ep_t */ ++ dwc_list_link_t active_eps; ++ ++ /* This flag shall control the propagation of a specific request ++ * to the gadget's processing routines. ++ * 0 - no gadget handling ++ * 1 - the gadget needs to know about this request (w/o completing a status ++ * phase - just return a 0 to the _setup callback) ++ */ ++ uint8_t need_gadget_att; ++ ++ /* Flag indicating whether the status IN phase needs to be ++ * completed by the PCD ++ */ ++ uint8_t need_status_in_complete; ++}; ++typedef struct cfiobject cfiobject_t; ++ ++#define DUMP_MSG ++ ++#if defined(DUMP_MSG) ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ ++ start = 0; ++ while (length > 0) { ++ num = min(length, 16u); ++ p = line; ++ for (i = 0; i < num; ++i) { ++ if (i == 8) ++ *p++ = ' '; ++ DWC_SPRINTF(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_DEBUG("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function returns a pointer to cfi_ep_t object with the addr address. ++ */ ++static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi, ++ uint8_t addr) ++{ ++ struct cfi_ep *pcfiep; ++ dwc_list_link_t *tmp; ++ ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ ++ if (pcfiep->ep->desc->bEndpointAddress == addr) { ++ return pcfiep; ++ } ++ } ++ ++ return NULL; ++} ++ ++/** ++ * This function returns a pointer to cfi_ep_t object that matches ++ * the dwc_otg_pcd_ep object. ++ */ ++static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi, ++ struct dwc_otg_pcd_ep *ep) ++{ ++ struct cfi_ep *pcfiep = NULL; ++ dwc_list_link_t *tmp; ++ ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ if (pcfiep->ep == ep) { ++ return pcfiep; ++ } ++ } ++ return NULL; ++} ++ ++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl); ++ ++#endif /* (__DWC_OTG_CFI_H__) */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,5410 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ ++ * $Revision: #159 $ ++ * $Date: 2009/04/21 $ ++ * $Change: 1237465 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * The CIL manages the memory map for the core so that the HCD and PCD ++ * don't have to do this separately. It also handles basic tasks like ++ * reading/writing the registers and data FIFOs in the controller. ++ * Some of the data access functions provide encapsulation of several ++ * operations required to perform a task, such as writing multiple ++ * registers to start a transfer. Finally, the CIL performs basic ++ * services that are not specific to either the host or device modes ++ * of operation. These services include management of the OTG Host ++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A ++ * Diagnostic API is also provided to allow testing of the controller ++ * hardware. ++ * ++ * The Core Interface Layer has the following requirements: ++ * - Provides basic controller operations. ++ * - Minimal use of OS services. ++ * - The OS services used will be abstracted by using inline functions ++ * or macros. ++ * ++ */ ++ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++ ++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if); ++ ++/** ++ * This function is called to initialize the DWC_otg CSR data ++ * structures. The register addresses in the device and host ++ * structures are initialized from the base address supplied by the ++ * caller. The calling function must make the OS calls to get the ++ * base address of the DWC_otg controller registers. The core_params ++ * argument holds the parameters that specify how the core should be ++ * configured. ++ * ++ * @param reg_base_addr Base address of DWC_otg core registers ++ * ++ */ ++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr) ++{ ++ dwc_otg_core_if_t *core_if = 0; ++ dwc_otg_dev_if_t *dev_if = 0; ++ dwc_otg_host_if_t *host_if = 0; ++ uint8_t *reg_base = (uint8_t *) reg_base_addr; ++ int i = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr); ++ ++ core_if = dwc_alloc(sizeof(dwc_otg_core_if_t)); ++ ++ if (core_if == 0) { ++ DWC_DEBUGPL(DBG_CIL, ++ "Allocation of dwc_otg_core_if_t failed\n"); ++ return 0; ++ } ++ core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base; ++ ++ /* ++ * Allocate the Device Mode structures. ++ */ ++ dev_if = dwc_alloc(sizeof(dwc_otg_dev_if_t)); ++ ++ if (dev_if == 0) { ++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); ++ dwc_free(core_if); ++ return 0; ++ } ++ ++ dev_if->dev_global_regs = ++ (dwc_otg_device_global_regs_t *) (reg_base + ++ DWC_DEV_GLOBAL_REG_OFFSET); ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) ++ (reg_base + DWC_DEV_IN_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ ++ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) ++ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", ++ i, &dev_if->in_ep_regs[i]->diepctl); ++ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", ++ i, &dev_if->out_ep_regs[i]->doepctl); ++ } ++ ++ dev_if->speed = 0; // unknown ++ ++ core_if->dev_if = dev_if; ++ ++ /* ++ * Allocate the Host Mode structures. ++ */ ++ host_if = dwc_alloc(sizeof(dwc_otg_host_if_t)); ++ ++ if (host_if == 0) { ++ DWC_DEBUGPL(DBG_CIL, ++ "Allocation of dwc_otg_host_if_t failed\n"); ++ dwc_free(dev_if); ++ dwc_free(core_if); ++ return 0; ++ } ++ ++ host_if->host_global_regs = (dwc_otg_host_global_regs_t *) ++ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); ++ ++ host_if->hprt0 = ++ (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) ++ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + ++ (i * DWC_OTG_CHAN_REGS_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", ++ i, &host_if->hc_regs[i]->hcchar); ++ } ++ ++ host_if->num_host_channels = MAX_EPS_CHANNELS; ++ core_if->host_if = host_if; ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ core_if->data_fifo[i] = ++ (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET + ++ (i * DWC_OTG_DATA_FIFO_SIZE)); ++ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n", ++ i, (unsigned)core_if->data_fifo[i]); ++ } ++ ++ core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET); ++ ++ /* Initiate lx_state to L3 disconnected state */ ++ core_if->lx_state = DWC_OTG_L3; ++ /* ++ * Store the contents of the hardware configuration registers here for ++ * easy access later. ++ */ ++ core_if->hwcfg1.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->ghwcfg1); ++ core_if->hwcfg2.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->ghwcfg2); ++ core_if->hwcfg3.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->ghwcfg3); ++ core_if->hwcfg4.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->ghwcfg4); ++ ++ DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32); ++ ++ core_if->hcfg.d32 = ++ dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg); ++ core_if->dcfg.d32 = ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); ++ ++ DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32); ++ DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode); ++ DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture); ++ DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep); ++ DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n", ++ core_if->hwcfg2.b.num_host_chan); ++ DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.nonperio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.host_perio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.dev_token_q_depth); ++ ++ DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n", ++ core_if->hwcfg3.b.dfifo_depth); ++ DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n", ++ core_if->hwcfg3.b.xfer_size_cntr_width); ++ ++ /* ++ * Set the SRP sucess bit for FS-I2c ++ */ ++ core_if->srp_success = 0; ++ core_if->srp_timer_started = 0; ++ ++ /* ++ * Create new workqueue and init works ++ */ ++ core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg"); ++ if (core_if->wq_otg == 0) { ++ DWC_WARN("DWC_WORKQ_ALLOC failed\n"); ++ dwc_free(host_if); ++ dwc_free(dev_if); ++ dwc_free(core_if); ++ return 0; ++ } ++ ++ core_if->snpsid = dwc_read_reg32(&core_if->core_global_regs->gsnpsid); ++ ++ DWC_PRINTF("Core Release: %x.%x%x%x\n", ++ (core_if->snpsid >> 12 & 0xF), ++ (core_if->snpsid >> 8 & 0xF), ++ (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF)); ++ ++ core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer", ++ w_wakeup_detected, core_if); ++ if (core_if->wkp_timer == 0) { ++ DWC_WARN("DWC_TIMER_ALLOC failed\n"); ++ dwc_free(host_if); ++ dwc_free(dev_if); ++ DWC_WORKQ_FREE(core_if->wq_otg); ++ dwc_free(core_if); ++ return 0; ++ } ++ ++ if (dwc_otg_setup_params(core_if)) { ++ DWC_WARN("Error while setting core params\n"); ++ } ++ ++ return core_if; ++} ++ ++/** ++ * This function frees the structures allocated by dwc_otg_cil_init(). ++ * ++ * @param core_if The core interface pointer returned from ++ * dwc_otg_cil_init(). ++ * ++ */ ++void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if) ++{ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); ++ ++ /* Disable all interrupts */ ++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0); ++ dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0); ++ ++ if (core_if->wq_otg) { ++ DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500); ++ DWC_WORKQ_FREE(core_if->wq_otg); ++ } ++ if (core_if->dev_if) { ++ dwc_free(core_if->dev_if); ++ } ++ if (core_if->host_if) { ++ dwc_free(core_if->host_if); ++ } ++ dwc_free(core_if); ++ DWC_TIMER_FREE(core_if->wkp_timer); ++ DWC_FREE(core_if->core_params); ++} ++ ++/** ++ * This function enables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ ++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); ++} ++ ++/** ++ * This function disables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ ++ DWC_PRINTF("%x -> %x\n", (unsigned int)&core_if->core_global_regs->gahbcfg, ahbcfg.d32); ++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); ++} ++ ++/** ++ * This function initializes the commmon interrupts, used in both ++ * device and host modes. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ /* Clear any pending OTG Interrupts */ ++ dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF); ++ ++ /* Clear any pending interrupts */ ++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* ++ * Enable the interrupts in the GINTMSK. ++ */ ++ intr_mask.b.modemismatch = 1; ++ intr_mask.b.otgintr = 1; ++ ++ if (!core_if->dma_enable) { ++ intr_mask.b.rxstsqlvl = 1; ++ } ++ ++ intr_mask.b.conidstschng = 1; ++ intr_mask.b.wkupintr = 1; ++ intr_mask.b.disconnect = 1; ++ intr_mask.b.usbsuspend = 1; ++ intr_mask.b.sessreqintr = 1; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->core_params->lpm_enable) { ++ intr_mask.b.lpmtranrcvd = 1; ++ } ++#endif ++ dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32); ++} ++ ++/** ++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY ++ * type. ++ */ ++static void init_fslspclksel(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t val; ++ hcfg_data_t hcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = DWC_HCFG_48_MHZ; ++ } else { ++ /* High speed PHY running at full speed or high speed */ ++ val = DWC_HCFG_30_60_MHZ; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); ++ hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg); ++ hcfg.b.fslspclksel = val; ++ dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/** ++ * Initializes the DevSpd field of the DCFG register depending on the PHY type ++ * and the enumeration speed of the device. ++ */ ++static void init_devspd(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t val; ++ dcfg_data_t dcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = 0x3; ++ } else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ /* High speed PHY running at full speed */ ++ val = 0x1; ++ } else { ++ /* High speed PHY running at high speed */ ++ val = 0x0; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); ++ ++ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++/** ++ * This function calculates the number of IN EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t num_in_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; ++ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; ++ int i; ++ ++ for (i = 0; i < num_eps; ++i) { ++ if (!(hwcfg1 & 0x1)) ++ num_in_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ ++ if (core_if->hwcfg4.b.ded_fifo_en) { ++ num_in_eps = ++ (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; ++ } ++ ++ return num_in_eps; ++} ++ ++/** ++ * This function calculates the number of OUT EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t num_out_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; ++ int i; ++ ++ for (i = 0; i < num_eps; ++i) { ++ if (!(hwcfg1 & 0x1)) ++ num_out_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ return num_out_eps; ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers and ++ * prepares the core for device mode or host mode operation. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++void dwc_otg_core_init(dwc_otg_core_if_t * core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ gusbcfg_data_t usbcfg = {.d32 = 0 }; ++ gi2cctl_data_t i2cctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n", ++ core_if, global_regs); ++ ++ /* Common Initialization */ ++ ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ ++ /* Program the ULPI External VBUS bit if needed */ ++ usbcfg.b.ulpi_ext_vbus_drv = ++ (core_if->core_params->phy_ulpi_ext_vbus == ++ DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; ++ ++ /* Set external TS Dline pulsing */ ++ usbcfg.b.term_sel_dl_pulse = ++ (core_if->core_params->ts_dline == 1) ? 1 : 0; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset the Controller */ ++ dwc_otg_core_reset(core_if); ++ ++ /* Initialize parameters from Hardware configuration registers. */ ++ dev_if->num_in_eps = calc_num_in_eps(core_if); ++ dev_if->num_out_eps = calc_num_out_eps(core_if); ++ ++ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", ++ core_if->hwcfg4.b.num_dev_perio_in_ep); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { ++ dev_if->perio_tx_fifo_size[i] = ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->perio_tx_fifo_size[i]); ++ } ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dev_if->tx_fifo_size[i] = ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->perio_tx_fifo_size[i]); ++ } ++ ++ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; ++ core_if->rx_fifo_size = dwc_read_reg32(&global_regs->grxfsiz); ++ core_if->nperio_tx_fifo_size = ++ dwc_read_reg32(&global_regs->gnptxfsiz) >> 16; ++ ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", ++ core_if->nperio_tx_fifo_size); ++ ++ /* This programming sequence needs to happen in FS mode before any other ++ * programming occurs */ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* If FS mode with FS PHY */ ++ ++ /* core_init() is now called on every switch so only call the ++ * following for the first time through. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ usbcfg.b.physel = 1; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset after a PHY select */ ++ dwc_otg_core_reset(core_if); ++ } ++ ++ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also ++ * do this on HNP Dev/Host mode switches (done in dev_init and ++ * host_init). */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ init_fslspclksel(core_if); ++ } else { ++ init_devspd(core_if); ++ } ++ ++ if (core_if->core_params->i2c_enable) { ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); ++ /* Program GUSBCFG.OtgUtmifsSel to I2C */ ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ usbcfg.b.otgutmifssel = 1; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Program GI2CCTL.I2CEn */ ++ i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl); ++ i2cctl.b.i2cdevaddr = 1; ++ i2cctl.b.i2cen = 0; ++ dwc_write_reg32(&global_regs->gi2cctl, i2cctl.d32); ++ i2cctl.b.i2cen = 1; ++ dwc_write_reg32(&global_regs->gi2cctl, i2cctl.d32); ++ } ++ ++ } /* endif speed == DWC_SPEED_PARAM_FULL */ ++ else { ++ /* High speed PHY. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ /* HS PHY parameters. These parameters are preserved ++ * during soft reset so only program the first time. Do ++ * a soft reset immediately after setting phyif. */ ++ usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type; ++ if (usbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ usbcfg.b.phyif = 0; ++ usbcfg.b.ddrsel = ++ core_if->core_params->phy_ulpi_ddr; ++ } else { ++ /* UTMI+ interface */ ++ if (core_if->core_params->phy_utmi_width == 16) { ++ usbcfg.b.phyif = 1; ++ ++ } else { ++ usbcfg.b.phyif = 0; ++ } ++ ++ } ++ ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ /* Reset after setting the PHY parameters */ ++ dwc_otg_core_reset(core_if); ++ } ++ } ++ ++ if ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) { ++ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 1; ++ usbcfg.b.ulpi_clk_sus_m = 1; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ } else { ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 0; ++ usbcfg.b.ulpi_clk_sus_m = 0; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ } ++ ++ /* Program the GAHBCFG Register. */ ++ switch (core_if->hwcfg2.b.architecture) { ++ ++ case DWC_SLAVE_ONLY_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); ++ ahbcfg.b.nptxfemplvl_txfemplvl = ++ DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ core_if->dma_enable = 0; ++ core_if->dma_desc_enable = 0; ++ break; ++ ++ case DWC_EXT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); ++ { ++ uint8_t brst_sz = core_if->core_params->dma_burst_size; ++ ahbcfg.b.hburstlen = 0; ++ while (brst_sz > 1) { ++ ahbcfg.b.hburstlen++; ++ brst_sz >>= 1; ++ } ++ } ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = ++ (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ case DWC_INT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); ++ /*ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR; */ ++ ahbcfg.b.hburstlen = (1<<3)|(0<<0); /* WRESP=1, max 4 beats */ ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = ++ (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ } ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ DWC_PRINTF("Using Descriptor DMA mode\n"); ++ } else { ++ DWC_PRINTF("Using Buffer DMA mode\n"); ++ ++ } ++ } else { ++ DWC_PRINTF("Using Slave mode\n"); ++ core_if->dma_desc_enable = 0; ++ } ++ ++ ahbcfg.b.dmaenable = core_if->dma_enable; ++ dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32); ++ ++ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; ++ ++ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; ++ core_if->multiproc_int_enable = core_if->core_params->mpi_enable; ++ DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n", ++ ((core_if->pti_enh_enable) ? "enabled" : "disabled")); ++ DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n", ++ ((core_if->multiproc_int_enable) ? "enabled" : "disabled")); ++ ++ /* ++ * Program the GUSBCFG register. ++ */ ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ ++ switch (core_if->hwcfg2.b.op_mode) { ++ case DWC_MODE_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = (core_if->core_params->otg_cap == ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_SRP_ONLY_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ } ++ ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->core_params->lpm_enable) { ++ glpmcfg_data_t lpmcfg = {.d32 = 0 }; ++ ++ /* To enable LPM support set lpm_cap_en bit */ ++ lpmcfg.b.lpm_cap_en = 1; ++ ++ /* Make AppL1Res ACK */ ++ lpmcfg.b.appl_resp = 1; ++ ++ /* Retry 3 times */ ++ lpmcfg.b.retry_count = 3; ++ ++ dwc_modify_reg32(&core_if->core_global_regs->glpmcfg, ++ 0, lpmcfg.d32); ++ ++ } ++#endif ++ if (core_if->core_params->ic_usb_cap) { ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gusbcfg.b.ic_usb_cap = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gusbcfg, ++ 0, gusbcfg.d32); ++ } ++ ++ /* Enable common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Do device or host intialization based on mode during PCD ++ * and HCD initialization */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); ++ core_if->op_state = A_HOST; ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); ++ core_if->op_state = B_PERIPHERAL; ++#ifdef DWC_DEVICE_ONLY ++ dwc_otg_core_dev_init(core_if); ++#endif ++ } ++} ++ ++/** ++ * This function enables the Device mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); ++ ++ /* Disable all interrupts. */ ++ dwc_write_reg32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts */ ++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Enable interrupts */ ++ intr_mask.b.usbreset = 1; ++ intr_mask.b.enumdone = 1; ++ ++ if (!core_if->multiproc_int_enable) { ++ intr_mask.b.inepintr = 1; ++ intr_mask.b.outepintr = 1; ++ } ++ ++ intr_mask.b.erlysuspend = 1; ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.epmismatch = 1; ++ } ++#ifdef DWC_EN_ISOC ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (core_if->pti_enh_enable) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.ifrmnum = 1; ++ dwc_modify_reg32(&core_if->dev_if-> ++ dev_global_regs->dctl, 0, ++ dctl.d32); ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++ } ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /** @todo NGS: Should this be a module parameter? */ ++#ifdef USE_PERIODIC_EP ++ intr_mask.b.isooutdrop = 1; ++ intr_mask.b.eopframe = 1; ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++#endif ++ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ++ dwc_read_reg32(&global_regs->gintmsk)); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * device mode. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ grstctl_t resetctl = {.d32 = 0 }; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize; ++ dthrctl_data_t dthrctl; ++ fifosize_data_t ptxfifosize; ++ ++ /* Restart the Phy Clock */ ++ dwc_write_reg32(core_if->pcgcctl, 0); ++ ++ /* Device configuration register */ ++ init_devspd(core_if); ++ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; ++ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; ++ ++ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", ++ core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", ++ params->dev_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", ++ params->dev_nperio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->grxfsiz)); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_rxfsiz = dwc_read_reg32(&global_regs->grxfsiz); ++ core_if->init_rxfsiz = params->dev_rx_fifo_size; ++#endif ++ rx_fifo_size = params->dev_rx_fifo_size; ++ dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->grxfsiz)); ++ ++ /** Set Periodic Tx FIFO Mask all bits 0 */ ++ core_if->p_tx_msk = 0; ++ ++ /** Set Tx FIFO Mask all bits 0 */ ++ core_if->tx_msk = 0; ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ dwc_write_reg32(&global_regs->gnptxfsiz, ++ nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ /**@todo NGS: Fix Periodic FIFO Sizing! */ ++ /* ++ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_perio_tx_fifo_size array and the FIFO size registers in ++ * the dptxfsiz array run from 0 to 14. ++ */ ++ /** @todo Finish debug of this */ ++ ptxfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++ i++) { ++ ptxfifosize.b.depth = ++ params->dev_perio_tx_fifo_size[i]; ++ DWC_DEBUGPL(DBG_CIL, ++ "initial dptxfsiz_dieptxf[%d]=%08x\n", ++ i, ++ dwc_read_reg32(&global_regs-> ++ dptxfsiz_dieptxf ++ [i])); ++ dwc_write_reg32(&global_regs-> ++ dptxfsiz_dieptxf[i], ++ ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, ++ "new dptxfsiz_dieptxf[%d]=%08x\n", ++ i, ++ dwc_read_reg32(&global_regs-> ++ dptxfsiz_dieptxf ++ [i])); ++ ptxfifosize.b.startaddr += ptxfifosize.b.depth; ++ } ++ } else { ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dptxfsiz_dieptxf array run from 0 to 14. ++ */ ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_gnptxfsiz = ++ (dwc_read_reg32(&global_regs->gnptxfsiz) >> 16); ++ core_if->init_gnptxfsiz = ++ params->dev_nperio_tx_fifo_size; ++#endif ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ dwc_write_reg32(&global_regs->gnptxfsiz, ++ nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ txfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ txfifosize.b.depth = ++ params->dev_tx_fifo_size[i]; ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "initial dptxfsiz_dieptxf[%d]=%08x\n", ++ i, ++ dwc_read_reg32(&global_regs-> ++ dptxfsiz_dieptxf ++ [i])); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_txfsiz[i] = ++ (dwc_read_reg32 ++ (&global_regs->dptxfsiz_dieptxf[i]) >> 16); ++ core_if->init_txfsiz[i] = ++ params->dev_tx_fifo_size[i]; ++#endif ++ dwc_write_reg32(&global_regs-> ++ dptxfsiz_dieptxf[i], ++ txfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "new dptxfsiz_dieptxf[%d]=%08x\n", ++ i, ++ dwc_read_reg32(&global_regs-> ++ dptxfsiz_dieptxf ++ [i])); ++ ++ txfifosize.b.startaddr += txfifosize.b.depth; ++ } ++ } ++ } ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Flush the Learning Queue. */ ++ resetctl.b.intknqflsh = 1; ++ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ /* Clear all pending Device Interrupts */ ++ /** @todo - if the condition needed to be checked ++ * or in any case all pending interrutps should be cleared? ++ */ ++ if (core_if->multiproc_int_enable) { ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ dwc_write_reg32(&dev_if->dev_global_regs-> ++ diepeachintmsk[i], 0); ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ dwc_write_reg32(&dev_if->dev_global_regs-> ++ doepeachintmsk[i], 0); ++ } ++ ++ dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); ++ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0); ++ } else { ++ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0); ++ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0); ++ dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); ++ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0); ++ } ++ ++ for (i = 0; i <= dev_if->num_in_eps; i++) { ++ depctl_data_t depctl; ++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); ++ if (depctl.b.epena) { ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } else { ++ depctl.d32 = 0; ++ } ++ ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0); ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0); ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF); ++ } ++ ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ depctl_data_t depctl; ++ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl); ++ if (depctl.b.epena) { ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } else { ++ depctl.d32 = 0; ++ } ++ ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); ++ ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0); ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0); ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF); ++ } ++ ++ if (core_if->en_multiple_tx_fifo && core_if->dma_enable) { ++ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; ++ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; ++ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; ++ ++ dev_if->rx_thr_length = params->rx_thr_length; ++ dev_if->tx_thr_length = params->tx_thr_length; ++ ++ dev_if->setup_desc_index = 0; ++ ++ dthrctl.d32 = 0; ++ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; ++ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; ++ dthrctl.b.tx_thr_len = dev_if->tx_thr_length; ++ dthrctl.b.rx_thr_en = dev_if->rx_thr_en; ++ dthrctl.b.rx_thr_len = dev_if->rx_thr_length; ++ dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio; ++ ++ dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, ++ dthrctl.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", ++ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, ++ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, ++ dthrctl.b.rx_thr_len); ++ ++ } ++ ++ dwc_otg_enable_device_interrupts(core_if); ++ ++ { ++ diepmsk_data_t msk = {.d32 = 0 }; ++ msk.b.txfifoundrn = 1; ++ if (core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&dev_if->dev_global_regs-> ++ diepeachintmsk[0], msk.d32, msk.d32); ++ } else { ++ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, ++ msk.d32, msk.d32); ++ } ++ } ++ ++ if (core_if->multiproc_int_enable) { ++ /* Set NAK on Babble */ ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.nakonbble = 1; ++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++} ++ ++/** ++ * This function enables the Host mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if); ++ ++ /* Disable all interrupts. */ ++ dwc_write_reg32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts. */ ++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* ++ * Enable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ ++ /* Do not need sof interrupt for Descriptor DMA*/ ++ if (!core_if->dma_desc_enable) ++ intr_mask.b.sofintr = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++} ++ ++/** ++ * This function disables the Host Mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); ++ ++ /* ++ * Disable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ intr_mask.b.sofintr = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ intr_mask.b.ptxfempty = 1; ++ intr_mask.b.nptxfempty = 1; ++ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * host mode. ++ * ++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the ++ * request queues. Host channels are reset to ensure that they are ready for ++ * performing transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t ptxfifosize; ++ int i; ++ hcchar_data_t hcchar; ++ hcfg_data_t hcfg; ++ dwc_otg_hc_regs_t *hc_regs; ++ int num_channels; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); ++ ++ /* Restart the Phy Clock */ ++ dwc_write_reg32(core_if->pcgcctl, 0); ++ ++ /* Initialize Host Configuration Register */ ++ init_fslspclksel(core_if); ++ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); ++ hcfg.b.fslssupp = 1; ++ dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ ++ } ++ ++ if (core_if->core_params->dma_desc_enable) { ++ uint8_t op_mode = core_if->hwcfg2.b.op_mode; ++ if (!(core_if->hwcfg4.b.desc_dma && (core_if->snpsid >= OTG_CORE_REV_2_90a) && ++ ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) || ++ (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) || ++ (op_mode == DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG) || ++ (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST) || ++ (op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) { ++ ++ DWC_ERROR("Host can't operate in Descriptor DMA mode.\n" ++ "Either core version is below 2.90a or " ++ "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n" ++ "To run the driver in Buffer DMA host mode set dma_desc_enable " ++ "module parameter to 0.\n"); ++ return; ++ } ++ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); ++ hcfg.b.descdma = 1; ++ dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", ++ core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", ++ params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", ++ params->host_nperio_tx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n", ++ params->host_perio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->grxfsiz)); ++ dwc_write_reg32(&global_regs->grxfsiz, ++ params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->grxfsiz)); ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->host_rx_fifo_size; ++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ /* Periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->hptxfsiz)); ++ ptxfifosize.b.depth = params->host_perio_tx_fifo_size; ++ ptxfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->hptxfsiz)); ++ } ++ ++ /* Clear Host Set HNP Enable in the OTG Control Register */ ++ gotgctl.b.hstsethnpen = 1; ++ dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0); ++ ++ /* Make sure the FIFOs are flushed. */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */ ); ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ if(!core_if->core_params->dma_desc_enable) { ++ /* Flush out any leftover queued requests. */ ++ num_channels = core_if->core_params->host_channels; ++ ++ for (i = 0; i < num_channels; i++) { ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ } ++ ++ /* Halt all channels to put them into a known state. */ ++ for (i = 0; i < num_channels; i++) { ++ int count = 0; ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs); ++ do { ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (++count > 1000) { ++ DWC_ERROR ++ ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n", ++ __func__, i, hcchar.d32, &hc_regs->hcchar); ++ break; ++ } ++ dwc_udelay(1); ++ } while (hcchar.b.chen); ++ } ++ } ++ ++ /* Turn on the vbus power. */ ++ DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state); ++ if (core_if->op_state == A_HOST) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr); ++ if (hprt0.b.prtpwr == 0) { ++ hprt0.b.prtpwr = 1; ++ dwc_write_reg32(host_if->hprt0, hprt0.d32); ++ } ++ } ++ ++ dwc_otg_enable_host_interrupts(core_if); ++} ++ ++/** ++ * Prepares a host channel for transferring packets to/from a specific ++ * endpoint. The HCCHARn register is set up with the characteristics specified ++ * in _hc. Host channel interrupts that may need to be serviced while this ++ * transfer is in progress are enabled. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * @param hc Information needed to initialize the host channel ++ */ ++void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ uint32_t intr_enable; ++ hcintmsk_data_t hc_intr_mask; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ ++ uint8_t hc_num = hc->hc_num; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; ++ ++ /* Clear old interrupt conditions for this host channel. */ ++ hc_intr_mask.d32 = 0xFFFFFFFF; ++ hc_intr_mask.b.reserved14_31 = 0; ++ dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32); ++ ++ /* Enable channel interrupts required for this transfer. */ ++ hc_intr_mask.d32 = 0; ++ hc_intr_mask.b.chhltd = 1; ++ if (core_if->dma_enable) { ++ /* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */ ++ if (!core_if->dma_desc_enable) ++ hc_intr_mask.b.ahberr = 1; ++ else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ hc_intr_mask.b.xfercompl = 1; ++ } ++ ++ if (hc->error_state && !hc->do_split && ++ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hc_intr_mask.b.ack = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ hc_intr_mask.b.nak = 1; ++ } ++ } ++ } ++ } else { ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } else { ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.nyet = 1; ++ if (hc->do_ping) { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ hc_intr_mask.b.nak = 1; ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ hc_intr_mask.b.ack = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.bblerr = 1; ++ } ++ break; ++ } ++ } ++ dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32); ++ ++ /* Enable the top level host channel interrupt. */ ++ intr_enable = (1 << hc_num); ++ dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable); ++ ++ /* Make sure host channel interrupts are enabled. */ ++ gintmsk.b.hcintr = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ ++ /* ++ * Program the HCCHARn register with the endpoint characteristics for ++ * the current transfer. ++ */ ++ hcchar.d32 = 0; ++ hcchar.b.devaddr = hc->dev_addr; ++ hcchar.b.epnum = hc->ep_num; ++ hcchar.b.epdir = hc->ep_is_in; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.eptype = hc->ep_type; ++ hcchar.b.mps = hc->max_packet; ++ ++ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr); ++ DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum); ++ DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir); ++ DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev); ++ DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype); ++ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); ++ DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt); ++ ++ /* ++ * Program the HCSPLIT register for SPLITs ++ */ ++ hcsplt.d32 = 0; ++ if (hc->do_split) { ++ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ++ hc->hc_num, ++ hc->complete_split ? "CSPLIT" : "SSPLIT"); ++ hcsplt.b.compsplt = hc->complete_split; ++ hcsplt.b.xactpos = hc->xact_pos; ++ hcsplt.b.hubaddr = hc->hub_addr; ++ hcsplt.b.prtaddr = hc->port_addr; ++ DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split); ++ DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos); ++ DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr); ++ DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr); ++ DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in); ++ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); ++ DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len); ++ } ++ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); ++ ++} ++ ++/** ++ * Attempts to halt a host channel. This function should only be called in ++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under ++ * normal circumstances in DMA mode, the controller halts the channel when the ++ * transfer is complete or a condition occurs that requires application ++ * intervention. ++ * ++ * In slave mode, checks for a free request queue entry, then sets the Channel ++ * Enable and Channel Disable bits of the Host Channel Characteristics ++ * register of the specified channel to intiate the halt. If there is no free ++ * request queue entry, sets only the Channel Disable bit of the HCCHARn ++ * register to flush requests for this channel. In the latter case, sets a ++ * flag to indicate that the host channel needs to be halted when a request ++ * queue slot is open. ++ * ++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the ++ * HCCHARn register. The controller ensures there is space in the request ++ * queue before submitting the halt request. ++ * ++ * Some time may elapse before the core flushes any posted requests for this ++ * host channel and halts. The Channel Halted interrupt handler completes the ++ * deactivation of the host channel. ++ * ++ * @param core_if Controller register interface. ++ * @param hc Host channel to halt. ++ * @param halt_status Reason for halting the channel. ++ */ ++void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc, dwc_otg_halt_status_e halt_status) ++{ ++ gnptxsts_data_t nptxsts; ++ hptxsts_data_t hptxsts; ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_core_global_regs_t *global_regs; ++ dwc_otg_host_global_regs_t *host_global_regs; ++ ++ DWC_DEBUGPL(DBG_HW2937, " dwc_otg_hc_halt(%d)\n", hc->hc_num); ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ global_regs = core_if->core_global_regs; ++ host_global_regs = core_if->host_if->host_global_regs; ++ ++ DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS), ++ "halt_status = %d\n", halt_status); ++ ++ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ /* ++ * Disable all channel interrupts except Ch Halted. The QTD ++ * and QH state associated with this transfer has been cleared ++ * (in the case of URB_DEQUEUE), so the channel needs to be ++ * shut down carefully to prevent crashes. ++ */ ++ hcintmsk_data_t hcintmsk; ++ hcintmsk.d32 = 0; ++ hcintmsk.b.chhltd = 1; ++ dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32); ++ ++ /* ++ * Make sure no other interrupts besides halt are currently ++ * pending. Handling another interrupt could cause a crash due ++ * to the QTD and QH state. ++ */ ++ dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32); ++ ++ /* ++ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR ++ * even if the channel was already halted for some other ++ * reason. ++ */ ++ hc->halt_status = halt_status; ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen == 0) { ++ /* ++ * The channel is either already halted or it hasn't ++ * started yet. In DMA mode, the transfer may halt if ++ * it finishes normally or a condition occurs that ++ * requires driver intervention. Don't want to halt ++ * the channel again. In either Slave or DMA mode, ++ * it's possible that the transfer has been assigned ++ * to a channel, but not started yet when an URB is ++ * dequeued. Don't want to halt a channel that hasn't ++ * started yet. ++ */ ++ return; ++ } ++ } ++ if (hc->halt_pending) { ++ /* ++ * A halt has already been issued for this channel. This might ++ * happen when a transfer is aborted by a higher level in ++ * the stack. ++ */ ++#ifdef DEBUG ++ DWC_PRINTF ++ ("*** %s: Channel %d, _hc->halt_pending already set ***\n", ++ __func__, hc->hc_num); ++ ++#endif ++ return; ++ } ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* No need to set the bit in DDMA for disabling the channel */ ++ //TODO check it everywhere channel is disabled ++ if(!core_if->core_params->dma_desc_enable) ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ ++ if (!core_if->dma_enable) { ++ /* Check for space in the request queue to issue the halt. */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ if (nptxsts.b.nptxqspcavail == 0) { ++ hcchar.b.chen = 0; ++ } ++ } else { ++ hptxsts.d32 = ++ dwc_read_reg32(&host_global_regs->hptxsts); ++ if ((hptxsts.b.ptxqspcavail == 0) ++ || (core_if->queuing_high_bandwidth)) { ++ hcchar.b.chen = 0; ++ } ++ } ++ } ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->halt_status = halt_status; ++ ++ if (hcchar.b.chen) { ++ hc->halt_pending = 1; ++ hc->halt_on_queue = 0; ++ } else { ++ hc->halt_on_queue = 1; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); ++ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); ++ ++ return; ++} ++ ++/** ++ * Clears the transfer state for a host channel. This function is normally ++ * called after a transfer is done and the host channel is being released. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to clean up. ++ */ ++void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs; ++ ++ hc->xfer_started = 0; ++ ++ /* ++ * Clear channel interrupt enables and any unhandled channel interrupt ++ * conditions. ++ */ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ dwc_write_reg32(&hc_regs->hcintmsk, 0); ++ dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF); ++#ifdef DEBUG ++ DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]); ++#endif ++} ++ ++/** ++ * Sets the channel property that indicates in which frame a periodic transfer ++ * should occur. This is always set to the _next_ frame. This function has no ++ * effect on non-periodic transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to set up and its properties. ++ * @param hcchar Current value of the HCCHAR register for the specified host ++ * channel. ++ */ ++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc, hcchar_data_t * hcchar) ++{ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hfnum_data_t hfnum; ++ hfnum.d32 = ++ dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum); ++ ++ /* 1 if _next_ frame is odd, 0 if it's even */ ++ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; ++#ifdef DEBUG ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split ++ && !hc->complete_split) { ++ switch (hfnum.b.frnum & 0x7) { ++ case 7: ++ core_if->hfnum_7_samples++; ++ core_if->hfnum_7_frrem_accum += hfnum.b.frrem; ++ break; ++ case 0: ++ core_if->hfnum_0_samples++; ++ core_if->hfnum_0_frrem_accum += hfnum.b.frrem; ++ break; ++ default: ++ core_if->hfnum_other_samples++; ++ core_if->hfnum_other_frrem_accum += ++ hfnum.b.frrem; ++ break; ++ } ++ } ++#endif ++ } ++} ++ ++#ifdef DEBUG ++void hc_xfer_timeout(void *ptr) ++{ ++ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *) ptr; ++ int hc_num = xfer_info->hc->hc_num; ++ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); ++ DWC_WARN(" start_hcchar_val 0x%08x\n", ++ xfer_info->core_if->start_hcchar_val[hc_num]); ++} ++#endif ++ ++void set_pid_isoc(dwc_hc_t * hc) ++{ ++ /* Set up the initial PID for the transfer. */ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ if (hc->ep_is_in) { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = ++ DWC_OTG_HC_PID_DATA0; ++ } else if (hc->multi_count == 2) { ++ hc->data_pid_start = ++ DWC_OTG_HC_PID_DATA1; ++ } else { ++ hc->data_pid_start = ++ DWC_OTG_HC_PID_DATA2; ++ } ++ } else { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = ++ DWC_OTG_HC_PID_DATA0; ++ } else { ++ hc->data_pid_start = ++ DWC_OTG_HC_PID_MDATA; ++ } ++ } ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for a host channel and ++ * starts the transfer. May be called in either Slave mode or DMA mode. In ++ * Slave mode, the caller must ensure that there is sufficient space in the ++ * request queue and Tx Data FIFO. ++ * ++ * For an OUT transfer in Slave mode, it loads a data packet into the ++ * appropriate FIFO. If necessary, additional data packets will be loaded in ++ * the Host ISR. ++ * ++ * For an IN transfer in Slave mode, a data packet is requested. The data ++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, ++ * additional data packets are requested in the Host ISR. ++ * ++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ ++ * register along with a packet count of 1 and the channel is enabled. This ++ * causes a single PING transaction to occur. Other fields in HCTSIZ are ++ * simply set to 0 since no data transfer occurs in this case. ++ * ++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with ++ * all the information required to perform the subsequent data transfer. In ++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the ++ * controller performs the entire PING protocol, then starts the data ++ * transfer. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. The xfer_len ++ * value may be reduced to accommodate the max widths of the XferSize and ++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed ++ * to reflect the final xfer_len value. ++ */ ++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ uint16_t num_packets; ++ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; ++ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping) { ++ if (!core_if->dma_enable) { ++ dwc_otg_hc_do_ping(core_if, hc); ++ hc->xfer_started = 1; ++ return; ++ } else { ++ hctsiz.b.dopng = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ num_packets = 1; ++ ++ if (hc->complete_split && !hc->ep_is_in) { ++ /* For CSPLIT OUT Transfer, set the size to 0 so the ++ * core doesn't expect any data written to the FIFO */ ++ hc->xfer_len = 0; ++ } else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { ++ hc->xfer_len = hc->max_packet; ++ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { ++ hc->xfer_len = 188; ++ } ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } else { ++ /* ++ * Ensure that the transfer length and packet count will fit ++ * in the widths allocated for them in the HCTSIZn register. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure the transfer size is no larger than one ++ * (micro)frame's worth of data. (A check was done ++ * when the periodic transfer was accepted to ensure ++ * that a (micro)frame's worth of data can be ++ * programmed into a channel.) ++ */ ++ uint32_t max_periodic_len = ++ hc->multi_count * hc->max_packet; ++ if (hc->xfer_len > max_periodic_len) { ++ hc->xfer_len = max_periodic_len; ++ } else { ++ } ++ } else if (hc->xfer_len > max_hc_xfer_size) { ++ /* Make sure that xfer_len is a multiple of max packet size. */ ++ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; ++ } ++ ++ if (hc->xfer_len > 0) { ++ num_packets = ++ (hc->xfer_len + hc->max_packet - ++ 1) / hc->max_packet; ++ if (num_packets > max_hc_pkt_count) { ++ num_packets = max_hc_pkt_count; ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ } else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ ++ if (hc->ep_is_in) { ++ /* Always program an integral # of max packets for IN transfers. */ ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure that the multi_count field matches the ++ * actual transfer length. ++ */ ++ hc->multi_count = num_packets; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ set_pid_isoc(hc); ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } ++ ++ hc->start_pkt_count = num_packets; ++ hctsiz.b.pktcnt = num_packets; ++ hctsiz.b.pid = hc->data_pid_start; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ ++ if (core_if->dma_enable) { ++ dwc_dma_t dma_addr; ++ if (hc->align_buff) { ++ dma_addr = hc->align_buff; ++ } else { ++ dma_addr = (uint32_t)hc->xfer_buff; ++ } ++ dwc_write_reg32(&hc_regs->hcdma, dma_addr); ++ } ++ ++ /* Start the split */ ++ if (hc->do_split) { ++ hcsplt_data_t hcsplt; ++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); ++ hcsplt.b.spltena = 1; ++ dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32); ++ } ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++ if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) { ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ } ++#ifdef DEBUG ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n", ++ hc->hc_num, core_if);//GRAYG ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); ++ } ++#endif ++} ++ ++/** ++ * This function does the setup for a data transfer for a host channel ++ * and starts the transfer in Descriptor DMA mode. ++ * ++ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. ++ * Sets PID and NTD values. For periodic transfers ++ * initializes SCHED_INFO field with micro-frame bitmap. ++ * ++ * Initializes HCDMA register with descriptor list address and CTD value ++ * then starts the transfer via enabling the channel. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. ++ */ ++void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcdma_data_t hcdma; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping && !hc->ep_is_in) ++ hctsiz.b_ddma.dopng = 1; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ set_pid_isoc(hc); ++ ++ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ ++ hctsiz.b_ddma.pid = hc->data_pid_start; ++ hctsiz.b_ddma.ntd = hc->ntd - 1; /* 0 - 1 descriptor, 1 - 2 descriptors, etc. */ ++ hctsiz.b_ddma.schinfo = hc->schinfo; /* Non-zero only for high-speed interrupt endpoints */ ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ DWC_DEBUGPL(DBG_HCDV, " NTD: %d\n", hctsiz.b_ddma.ntd); ++ ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcdma.d32 = 0; ++ hcdma.b.dma_addr = ((uint32_t)hc->desc_list_addr) >> 11; ++ ++ /* Always start from first descriptor. */ ++ hcdma.b.ctd = 0; ++ dwc_write_reg32(&hc_regs->hcdma, hcdma.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++#ifdef DEBUG ++ if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR) && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) { ++ DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n", ++ hc->hc_num, core_if);//GRAYG ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); ++ } ++ ++#endif ++ ++} ++ ++/** ++ * This function continues a data transfer that was started by previous call ++ * to dwc_otg_hc_start_transfer. The caller must ensure there is ++ * sufficient space in the request queue and Tx Data FIFO. This function ++ * should only be called in Slave mode. In DMA mode, the controller acts ++ * autonomously to complete transfers programmed to a host channel. ++ * ++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO ++ * if there is any data remaining to be queued. For an IN transfer, another ++ * data packet is always requested. For the SETUP phase of a control transfer, ++ * this function does nothing. ++ * ++ * @return 1 if a new request is queued, 0 if no more requests are required ++ * for this transfer. ++ */ ++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ if (hc->do_split) { ++ /* SPLITs always queue just once per channel */ ++ return 0; ++ } else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ /* SETUPs are queued only once since they can't be NAKed. */ ++ return 0; ++ } else if (hc->ep_is_in) { ++ /* ++ * Always queue another request for other IN transfers. If ++ * back-to-back INs are issued and NAKs are received for both, ++ * the driver may still be processing the first NAK when the ++ * second NAK is received. When the interrupt handler clears ++ * the NAK interrupt for the first NAK, the second NAK will ++ * not be seen. So we can't depend on the NAK interrupt ++ * handler to requeue a NAKed request. Instead, IN requests ++ * are issued each time this function is called. When the ++ * transfer completes, the extra requests for the channel will ++ * be flushed. ++ */ ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs = ++ core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", ++ hcchar.d32); ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ hc->requests++; ++ return 1; ++ } else { ++ /* OUT transfers. */ ++ if (hc->xfer_count < hc->xfer_len) { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ } ++ ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ hc->requests++; ++ return 1; ++ } else { ++ return 0; ++ } ++ } ++} ++ ++/** ++ * Starts a PING transfer. This function should only be called in Slave mode. ++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. ++ */ ++void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ hctsiz.d32 = 0; ++ hctsiz.b.dopng = 1; ++ hctsiz.b.pktcnt = 1; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++} ++ ++/* ++ * This function writes a packet into the Tx FIFO associated with the Host ++ * Channel. For a channel associated with a non-periodic EP, the non-periodic ++ * Tx FIFO is written. For a channel associated with a periodic EP, the ++ * periodic Tx FIFO is written. This function should only be called in Slave ++ * mode. ++ * ++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by ++ * then number of bytes written to the Tx FIFO. ++ */ ++void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ uint32_t i; ++ uint32_t remaining_count; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ ++ uint32_t *data_buff = (uint32_t *) (hc->xfer_buff); ++ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; ++ ++ remaining_count = hc->xfer_len - hc->xfer_count; ++ if (remaining_count > hc->max_packet) { ++ byte_count = hc->max_packet; ++ } else { ++ byte_count = remaining_count; ++ } ++ ++ dword_count = (byte_count + 3) / 4; ++ ++ if ((((unsigned long)data_buff) & 0x3) == 0) { ++ /* xfer_buff is DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ dwc_write_reg32(data_fifo, *data_buff); ++ } ++ } else { ++ /* xfer_buff is not DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ uint32_t data; ++ data = ++ (data_buff[0] | data_buff[1] << 8 | data_buff[2] << ++ 16 | data_buff[3] << 24); ++ dwc_write_reg32(data_fifo, data); ++ } ++ } ++ ++ hc->xfer_count += byte_count; ++ hc->xfer_buff += byte_count; ++} ++ ++/** ++ * Gets the current USB frame number. This is the frame number from the last ++ * SOF packet. ++ */ ++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /* read current frame/microframe number from DSTS register */ ++ return dsts.b.soffn; ++} ++ ++/** ++ * This function reads a setup packet from the Rx FIFO into the destination ++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) ++ * Interrupt routine when a SETUP packet has been received in Slave mode. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for packet data. ++ */ ++void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest) ++{ ++ /* Get the 8 bytes of a setup transaction data */ ++ ++ /* Pop 2 DWORDS off the receive data FIFO into memory */ ++ dest[0] = dwc_read_reg32(core_if->data_fifo[0]); ++ dest[1] = dwc_read_reg32(core_if->data_fifo[0]); ++} ++ ++/** ++ * This function enables EP0 OUT to receive SETUP packets and configures EP0 ++ * IN for transmitting packets. It is normally called when the ++ * "Enumeration Done" interrupt occurs. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dsts_data_t dsts; ++ depctl_data_t diepctl; ++ depctl_data_t doepctl; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ /* Read the Device Status and Endpoint 0 Control registers */ ++ dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts); ++ diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl); ++ doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl); ++ ++ /* Set the MPS of the IN EP based on the enumeration speed */ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_64; ++ break; ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_8; ++ break; ++ } ++ ++ dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Enable OUT EP for receive */ ++ doepctl.b.epena = 1; ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", ++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", ++ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++ dctl.b.cgnpinnak = 1; ++ ++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n", ++ dwc_read_reg32(&dev_if->dev_global_regs->dctl)); ++} ++ ++/** ++ * This function activates an EP. The Device EP control register for ++ * the EP is configured as defined in the ep structure. Note: This ++ * function is not used for EP0. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to activate. ++ */ ++void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t depctl; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1 << ep->num; ++ } else { ++ addr = &dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1 << ep->num; ++ } ++ ++ /* If the EP is already active don't change the EP Control ++ * register. */ ++ depctl.d32 = dwc_read_reg32(addr); ++ if (!depctl.b.usbactep) { ++ depctl.b.mps = ep->maxpacket; ++ depctl.b.eptype = ep->type; ++ depctl.b.txfnum = ep->tx_fifo_num; ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ depctl.b.setd0pid = 1; // ??? ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ depctl.b.usbactep = 1; ++ ++ dwc_write_reg32(addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", dwc_read_reg32(addr)); ++ } ++ ++ /* Enable the Interrupt for this EP */ ++ if (core_if->multiproc_int_enable) { ++ if (ep->is_in == 1) { ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ diepmsk.b.txfifoundrn = 1; //????? ++ ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++/* ++ if(core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num], diepmsk.d32); ++ ++ } else { ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if (core_if->dma_desc_enable) { ++ doepmsk.b.bna = 1; ++ } ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ doepmsk.b.nak = 1; ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs-> ++ doepeachintmsk[ep->num], doepmsk.d32); ++ } ++ dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk, ++ 0, daintmsk.d32); ++ } else { ++ dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk, ++ 0, daintmsk.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n", ++ dwc_read_reg32(&dev_if->dev_global_regs->daintmsk)); ++ ++ ep->stall_clear_flag = 0; ++ return; ++} ++ ++/** ++ * This function deactivates an EP. This is done by clearing the USB Active ++ * EP bit in the Device EP control register. Note: This function is not used ++ * for EP0. EP0 cannot be deactivated. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to deactivate. ++ */ ++void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1 << ep->num; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1 << ep->num; ++ } ++ ++ depctl.d32 = dwc_read_reg32(addr); ++ ++ depctl.b.usbactep = 0; ++ ++ if (core_if->dma_desc_enable) ++ depctl.b.epdis = 1; ++ ++ dwc_write_reg32(addr, depctl.d32); ++ ++ /* Disable the Interrupt for this EP */ ++ if (core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32, 0); ++ ++ if (ep->is_in == 1) { ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num], 0); ++ } else { ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[ep->num], 0); ++ } ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32, 0); ++ } ++} ++ ++/** ++ * This function initializes dma descriptor chain. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ uint32_t offset; ++ uint32_t xfer_est; ++ int i; ++ ++ ep->desc_cnt = (ep->total_len / ep->maxxfer) + ++ ((ep->total_len % ep->maxxfer) ? 1 : 0); ++ if (!ep->desc_cnt) ++ ep->desc_cnt = 1; ++ ++ dma_desc = ep->desc_addr; ++ xfer_est = ep->total_len; ++ offset = 0; ++ for (i = 0; i < ep->desc_cnt; ++i) { ++ /** DMA Descriptor Setup */ ++ if (xfer_est > ep->maxxfer) { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 0; ++ dma_desc->status.b.ioc = 0; ++ dma_desc->status.b.sp = 0; ++ dma_desc->status.b.bytes = ep->maxxfer; ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ xfer_est -= ep->maxxfer; ++ offset += ep->maxxfer; ++ } else { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ if (ep->is_in) { ++ dma_desc->status.b.sp = ++ (xfer_est % ++ ep->maxpacket) ? 1 : ((ep-> ++ sent_zlp) ? 1 : 0); ++ dma_desc->status.b.bytes = xfer_est; ++ } else { ++ dma_desc->status.b.bytes = ++ xfer_est + ((4 - (xfer_est & 0x3)) & 0x3); ++ } ++ ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ } ++ dma_desc++; ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n", ++ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff, ++ ep->total_len); ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ gtxstatus.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->gnptxsts); ++ ++ if (core_if->en_multiple_tx_fifo == 0 ++ && gtxstatus.b.nptxqspcavail == 0) { ++#ifdef DEBUG ++ DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl)); ++ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz)); ++ ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ ++ /* Zero Length Packet? */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count - 1 + ++ ep->maxpacket) / ep->maxpacket; ++ } ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ dwc_write_reg32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ dwc_write_reg32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++#ifdef DWC_UTE_CFI ++ /* The descriptor chain should be already initialized by now */ ++ if (ep->buff_mode != BM_STANDARD) { ++ dwc_write_reg32(&in_regs->diepdma, ++ ep->descs_dma_addr); ++ } else { ++#endif ++ init_dma_desc_chain(core_if, ep); ++ /** DIEPDMAn Register write */ ++ dwc_write_reg32(&in_regs->diepdma, ++ ep->dma_desc_addr); ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ } ++ } else { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ if (ep->type != DWC_OTG_EP_TYPE_ISOC) { ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if-> ++ core_global_regs-> ++ gintmsk, intr_mask.d32, ++ intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ dwc_modify_reg32(&core_if-> ++ dev_if-> ++ dev_global_regs-> ++ dtknqr4_fifoemptymsk, ++ 0, ++ fifoemptymsk); ++ ++ } ++ } ++ } ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&in_regs->diepctl, depctl.d32); ++ ++ depctl.d32 = ++ dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl); ++ depctl.b.nextep = ep->num; ++ dwc_write_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl, ++ depctl.d32); ++ ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl)); ++ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz)); ++ ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ ++ /* Program the transfer size and packet count as follows: ++ * ++ * pktcnt = N ++ * xfersize = N * maxpacket ++ */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count + ++ (ep->maxpacket - 1)) / ep->maxpacket; ++ ep->xfer_len = ++ deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", ++ ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ dwc_write_reg32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ dwc_write_reg32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++#ifdef DWC_UTE_CFI ++ /* The descriptor chain should be already initialized by now */ ++ if (ep->buff_mode != BM_STANDARD) { ++ dwc_write_reg32(&out_regs->doepdma, ++ ep->descs_dma_addr); ++ } else { ++#endif ++ ++ init_dma_desc_chain(core_if, ep); ++ ++ /** DOEPDMAn Register write */ ++ dwc_write_reg32(&out_regs->doepdma, ++ ep->dma_desc_addr); ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ } ++ } else { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ dwc_write_reg32(&out_regs->doepctl, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", ++ dwc_read_reg32(&out_regs->doepctl), ++ dwc_read_reg32(&out_regs->doeptsiz)); ++ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs-> ++ daintmsk), ++ dwc_read_reg32(&core_if->core_global_regs-> ++ gintmsk)); ++ } ++} ++ ++/** ++ * This function setup a zero length transfer in Buffer DMA and ++ * Slave modes for usb requests with zero field set ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ DWC_PRINTF("zero length transfer is called\n"); ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl)); ++ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz)); ++ ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ dwc_write_reg32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ dwc_write_reg32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } else { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs-> ++ gintmsk, intr_mask.d32, ++ intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ dwc_modify_reg32(&core_if->dev_if-> ++ dev_global_regs-> ++ dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&in_regs->diepctl, depctl.d32); ++ ++ depctl.d32 = ++ dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl); ++ depctl.b.nextep = ep->num; ++ dwc_write_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl, ++ depctl.d32); ++ ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl)); ++ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz)); ++ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ dwc_write_reg32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ dwc_write_reg32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } else { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ dwc_write_reg32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for EP0 and starts ++ * the transfer. For an IN transfer, the packets will be loaded into ++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are ++ * unloaded from the Rx FIFO in the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p \n", ++ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); ++ ++ ep->total_len = ep->xfer_len; ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ gtxstatus.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->gnptxsts); ++ ++ if (core_if->en_multiple_tx_fifo == 0 ++ && gtxstatus.b.nptxqspcavail == 0) { ++#ifdef DEBUG ++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); ++ DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n", ++ dwc_read_reg32(&in_regs->diepctl)); ++ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", ++ deptsiz.d32, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n", ++ gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl); ++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); ++ ++ /* Zero Length Packet? */ ++ if (ep->xfer_len == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ if (ep->xfer_len > ep->maxpacket) { ++ ep->xfer_len = ep->maxpacket; ++ deptsiz.b.xfersize = ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = ep->xfer_len; ++ } ++ deptsiz.b.pktcnt = 1; ++ ++ } ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ dwc_write_reg32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ ++ dwc_write_reg32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = ++ (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ dwc_write_reg32(&in_regs->diepdma, ++ core_if->dev_if-> ++ dma_in_desc_addr); ++ } ++ } else { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs-> ++ gintmsk, intr_mask.d32, ++ intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ dwc_modify_reg32(&core_if->dev_if-> ++ dev_global_regs-> ++ dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = dwc_read_reg32(&out_regs->doepctl); ++ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count as follows: ++ * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) ++ * pktcnt = N */ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ dwc_write_reg32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ dwc_write_reg32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ dwc_write_reg32(&out_regs->doepdma, ++ core_if->dev_if-> ++ dma_out_desc_addr); ++ } ++ } else { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&(out_regs->doepctl), depctl.d32); ++ } ++} ++ ++/** ++ * This function continues control IN transfers started by ++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a ++ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one ++ * bit for the packet count. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ gnptxsts_data_t tx_status = {.d32 = 0 }; ++ ++ tx_status.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->gnptxsts); ++ /** @todo Should there be check for room in the Tx ++ * Status Queue. If not remove the code above this comment. */ ++ ++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl); ++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.b.xfersize = ++ (ep->total_len - ep->xfer_count) > ++ ep->maxpacket ? ep->maxpacket : (ep->total_len - ++ ep->xfer_count); ++ deptsiz.b.pktcnt = 1; ++ if (core_if->dma_enable == 0) { ++ ep->xfer_len += deptsiz.b.xfersize; ++ } else { ++ ep->xfer_len = deptsiz.b.xfersize; ++ } ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ } else { ++ ep->xfer_len = ++ (ep->total_len - ep->xfer_count) > ++ ep->maxpacket ? ep->maxpacket : (ep->total_len - ++ ep->xfer_count); ++ ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = ++ (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ dwc_write_reg32(&in_regs->diepdma, ++ core_if->dev_if->dma_in_desc_addr); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if (core_if->dma_desc_enable == 0) ++ dwc_write_reg32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if (core_if->en_multiple_tx_fifo == 0) { ++ /* First clear it from GINTSTS */ ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs-> ++ gintmsk, intr_mask.d32, ++ intr_mask.d32); ++ ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ dwc_modify_reg32(&core_if->dev_if-> ++ dev_global_regs-> ++ dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = dwc_read_reg32(&out_regs->doepctl); ++ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_desc_enable == 0) { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ } else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ dwc_write_reg32(&out_regs->doepdma, ++ core_if->dev_if->dma_out_desc_addr); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if (core_if->dma_desc_enable == 0) ++ dwc_write_reg32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++#ifdef DEBUG ++void dump_msg(const u8 * buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ start = 0; ++ while (length > 0) { ++ num = length < 16u ? length : 16u; ++ p = line; ++ for (i = 0; i < num; ++i) { ++ if (i == 8) ++ *p++ = ' '; ++ DWC_SPRINTF(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_PRINTF("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function writes a packet into the Tx FIFO associated with the ++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For ++ * periodic EPs the periodic Tx FIFO associated with the EP is written ++ * with all packets for the next micro-frame. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to write packet for. ++ * @param dma Indicates if DMA is being used. ++ */ ++void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep, ++ int dma) ++{ ++ /** ++ * The buffer is padded to DWORD on a per packet basis in ++ * slave/dma mode if the MPS is not DWORD aligned. The last ++ * packet, if short, is also padded to a multiple of DWORD. ++ * ++ * ep->xfer_buff always starts DWORD aligned in memory and is a ++ * multiple of DWORD in length ++ * ++ * ep->xfer_len can be any number of bytes ++ * ++ * ep->xfer_count is a multiple of ep->maxpacket until the last ++ * packet ++ * ++ * FIFO access is DWORD */ ++ ++ uint32_t i; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ uint32_t *fifo; ++ uint32_t *data_buff = (uint32_t *) ep->xfer_buff; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ++ ep); ++ if (ep->xfer_count >= ep->xfer_len) { ++ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); ++ return; ++ } ++ ++ /* Find the byte length of the packet either short packet or MPS */ ++ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { ++ byte_count = ep->xfer_len - ep->xfer_count; ++ } else { ++ byte_count = ep->maxpacket; ++ } ++ ++ /* Find the DWORD length, padded by extra bytes as neccessary if MPS ++ * is not a multiple of DWORD */ ++ dword_count = (byte_count + 3) / 4; ++ ++#ifdef VERBOSE ++ dump_msg(ep->xfer_buff, byte_count); ++#endif ++ ++ /**@todo NGS Where are the Periodic Tx FIFO addresses ++ * intialized? What should this be? */ ++ ++ fifo = core_if->data_fifo[ep->num]; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", ++ fifo, data_buff, *data_buff, byte_count); ++ ++ if (!dma) { ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ dwc_write_reg32(fifo, *data_buff); ++ } ++ } ++ ++ ep->xfer_count += byte_count; ++ ep->xfer_buff += byte_count; ++ ep->dma_addr += byte_count; ++} ++ ++/** ++ * Set the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to set the stall on. ++ */ ++void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ depctl.d32 = dwc_read_reg32(depctl_addr); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ dwc_write_reg32(depctl_addr, depctl.d32); ++ } else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ depctl.d32 = dwc_read_reg32(depctl_addr); ++ ++ /* set the stall bit */ ++ depctl.b.stall = 1; ++ dwc_write_reg32(depctl_addr, depctl.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", dwc_read_reg32(depctl_addr)); ++ ++ return; ++} ++ ++/** ++ * Clear the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to clear stall from. ++ */ ++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ } else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ } ++ ++ depctl.d32 = dwc_read_reg32(depctl_addr); ++ ++ /* clear the stall bits */ ++ depctl.b.stall = 0; ++ ++ /* ++ * USB Spec 9.4.5: For endpoints using data toggle, regardless ++ * of whether an endpoint has the Halt feature set, a ++ * ClearFeature(ENDPOINT_HALT) request always results in the ++ * data toggle being reinitialized to DATA0. ++ */ ++ if (ep->type == DWC_OTG_EP_TYPE_INTR || ++ ep->type == DWC_OTG_EP_TYPE_BULK) { ++ depctl.b.setd0pid = 1; /* DATA0 */ ++ } ++ ++ dwc_write_reg32(depctl_addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", dwc_read_reg32(depctl_addr)); ++ return; ++} ++ ++/** ++ * This function reads a packet from the Rx FIFO into the destination ++ * buffer. To read SETUP data use dwc_otg_read_setup_packet. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for the packet. ++ * @param bytes Number of bytes to copy to the destination. ++ */ ++void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, ++ uint8_t * dest, uint16_t bytes) ++{ ++ int i; ++ int word_count = (bytes + 3) / 4; ++ ++ volatile uint32_t *fifo = core_if->data_fifo[0]; ++ uint32_t *data_buff = (uint32_t *) dest; ++ ++ /** ++ * @todo Account for the case where _dest is not dword aligned. This ++ * requires reading data from the FIFO into a uint32_t temp buffer, ++ * then moving it into the data buffer. ++ */ ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, ++ core_if, dest, bytes); ++ ++ for (i = 0; i < word_count; i++, data_buff++) { ++ *data_buff = dwc_read_reg32(fifo); ++ } ++ ++ return; ++} ++ ++/** ++ * This functions reads the device registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Device Global Registers\n"); ++ addr = &core_if->dev_if->dev_global_regs->dcfg; ++ DWC_PRINTF("DCFG @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dctl; ++ DWC_PRINTF("DCTL @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dsts; ++ DWC_PRINTF("DSTS @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->diepmsk; ++ DWC_PRINTF("DIEPMSK @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->doepmsk; ++ DWC_PRINTF("DOEPMSK @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->daint; ++ DWC_PRINTF("DAINT @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->daintmsk; ++ DWC_PRINTF("DAINTMSK @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dtknqr1; ++ DWC_PRINTF("DTKNQR1 @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ if (core_if->hwcfg2.b.dev_token_q_depth > 6) { ++ addr = &core_if->dev_if->dev_global_regs->dtknqr2; ++ DWC_PRINTF("DTKNQR2 @0x%08X : 0x%08X\n", ++ (uint32_t) addr, dwc_read_reg32(addr)); ++ } ++ ++ addr = &core_if->dev_if->dev_global_regs->dvbusdis; ++ DWC_PRINTF("DVBUSID @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->dvbuspulse; ++ DWC_PRINTF("DVBUSPULSE @0x%08X : 0x%08X\n", ++ (uint32_t) addr, dwc_read_reg32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; ++ DWC_PRINTF("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n", ++ (uint32_t) addr, dwc_read_reg32(addr)); ++ ++ if (core_if->hwcfg2.b.dev_token_q_depth > 22) { ++ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINTF("DTKNQR4 @0x%08X : 0x%08X\n", ++ (uint32_t) addr, dwc_read_reg32(addr)); ++ } ++ ++ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINTF("FIFOEMPMSK @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->deachint; ++ DWC_PRINTF("DEACHINT @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->deachintmsk; ++ DWC_PRINTF("DEACHINTMSK @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ addr = &core_if->dev_if->dev_global_regs->diepeachintmsk[i]; ++ DWC_PRINTF("DIEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, ++ (uint32_t) addr, dwc_read_reg32(addr)); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ addr = &core_if->dev_if->dev_global_regs->doepeachintmsk[i]; ++ DWC_PRINTF("DOEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, ++ (uint32_t) addr, dwc_read_reg32(addr)); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_PRINTF("Device IN EP %d Registers\n", i); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepctl; ++ DWC_PRINTF("DIEPCTL @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepint; ++ DWC_PRINTF("DIEPINT @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz; ++ DWC_PRINTF("DIETSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepdma; ++ DWC_PRINTF("DIEPDMA @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts; ++ DWC_PRINTF("DTXFSTS @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepdmab; ++ DWC_PRINTF("DIEPDMAB @0x%08X : 0x%08X\n", (uint32_t) addr, ++ 0 /*dwc_read_reg32(addr) */ ); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ DWC_PRINTF("Device OUT EP %d Registers\n", i); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepctl; ++ DWC_PRINTF("DOEPCTL @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepfn; ++ DWC_PRINTF("DOEPFN @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepint; ++ DWC_PRINTF("DOEPINT @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz; ++ DWC_PRINTF("DOETSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepdma; ++ DWC_PRINTF("DOEPDMA @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ if (core_if->dma_enable) { /* Don't access this register in SLAVE mode */ ++ addr = &core_if->dev_if->out_ep_regs[i]->doepdmab; ++ DWC_PRINTF("DOEPDMAB @0x%08X : 0x%08X\n", ++ (uint32_t) addr, dwc_read_reg32(addr)); ++ } ++ ++ } ++} ++ ++/** ++ * This functions reads the SPRAM and prints its content ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if) ++{ ++ volatile uint8_t *addr, *start_addr, *end_addr; ++ ++ DWC_PRINTF("SPRAM Data:\n"); ++ start_addr = (void *)core_if->core_global_regs; ++ DWC_PRINTF("Base Address: 0x%8X\n", (uint32_t) start_addr); ++ start_addr += 0x00028000; ++ end_addr = (void *)core_if->core_global_regs; ++ end_addr += 0x000280e0; ++ ++ for (addr = start_addr; addr < end_addr; addr += 16) { ++ DWC_PRINTF ++ ("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", ++ (uint32_t) addr, addr[0], addr[1], addr[2], addr[3], ++ addr[4], addr[5], addr[6], addr[7], addr[8], addr[9], ++ addr[10], addr[11], addr[12], addr[13], addr[14], addr[15] ++ ); ++ } ++ ++ return; ++} ++ ++/** ++ * This function reads the host registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Host Global Registers\n"); ++ addr = &core_if->host_if->host_global_regs->hcfg; ++ DWC_PRINTF("HCFG @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->host_global_regs->hfir; ++ DWC_PRINTF("HFIR @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->host_global_regs->hfnum; ++ DWC_PRINTF("HFNUM @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->host_global_regs->hptxsts; ++ DWC_PRINTF("HPTXSTS @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->host_global_regs->haint; ++ DWC_PRINTF("HAINT @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->host_global_regs->haintmsk; ++ DWC_PRINTF("HAINTMSK @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ if (core_if->dma_desc_enable) { ++ addr = &core_if->host_if->host_global_regs->hflbaddr; ++ DWC_PRINTF("HFLBADDR @0x%08X : 0x%08X\n",(uint32_t) addr, ++ dwc_read_reg32(addr)); ++ } ++ ++ addr = core_if->host_if->hprt0; ++ DWC_PRINTF("HPRT0 @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ ++ for (i = 0; i < core_if->core_params->host_channels; i++) { ++ DWC_PRINTF("Host Channel %d Specific Registers\n", i); ++ addr = &core_if->host_if->hc_regs[i]->hcchar; ++ DWC_PRINTF("HCCHAR @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcsplt; ++ DWC_PRINTF("HCSPLT @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcint; ++ DWC_PRINTF("HCINT @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcintmsk; ++ DWC_PRINTF("HCINTMSK @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hctsiz; ++ DWC_PRINTF("HCTSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcdma; ++ DWC_PRINTF("HCDMA @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ if (core_if->dma_desc_enable) { ++ addr=&core_if->host_if->hc_regs[i]->hcdmab; ++ DWC_PRINTF("HCDMAB @0x%08X : 0x%08X\n",(uint32_t) addr, dwc_read_reg32(addr)); ++ } ++ ++ } ++ return; ++} ++ ++/** ++ * This function reads the core global registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Core Global Registers\n"); ++ addr = &core_if->core_global_regs->gotgctl; ++ DWC_PRINTF("GOTGCTL @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gotgint; ++ DWC_PRINTF("GOTGINT @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gahbcfg; ++ DWC_PRINTF("GAHBCFG @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gusbcfg; ++ DWC_PRINTF("GUSBCFG @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->grstctl; ++ DWC_PRINTF("GRSTCTL @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gintsts; ++ DWC_PRINTF("GINTSTS @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gintmsk; ++ DWC_PRINTF("GINTMSK @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->grxstsr; ++ DWC_PRINTF("GRXSTSR @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->grxfsiz; ++ DWC_PRINTF("GRXFSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gnptxfsiz; ++ DWC_PRINTF("GNPTXFSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gnptxsts; ++ DWC_PRINTF("GNPTXSTS @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gi2cctl; ++ DWC_PRINTF("GI2CCTL @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gpvndctl; ++ DWC_PRINTF("GPVNDCTL @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->ggpio; ++ DWC_PRINTF("GGPIO @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->guid; ++ DWC_PRINTF("GUID @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->gsnpsid; ++ DWC_PRINTF("GSNPSID @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg1; ++ DWC_PRINTF("GHWCFG1 @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg2; ++ DWC_PRINTF("GHWCFG2 @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg3; ++ DWC_PRINTF("GHWCFG3 @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg4; ++ DWC_PRINTF("GHWCFG4 @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->glpmcfg; ++ DWC_PRINTF("GLPMCFG @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ addr = &core_if->core_global_regs->hptxfsiz; ++ DWC_PRINTF("HPTXFSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { ++ addr = &core_if->core_global_regs->dptxfsiz_dieptxf[i]; ++ DWC_PRINTF("DPTXFSIZ[%d] @0x%08X : 0x%08X\n", i, ++ (uint32_t) addr, dwc_read_reg32(addr)); ++ } ++ addr = core_if->pcgcctl; ++ DWC_PRINTF("PCGCCTL @0x%08X : 0x%08X\n", (uint32_t) addr, ++ dwc_read_reg32(addr)); ++} ++ ++/** ++ * Flush a Tx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param num Tx FIFO to flush. ++ */ ++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num); ++ ++ greset.b.txfflsh = 1; ++ greset.b.txfnum = num; ++ dwc_write_reg32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = dwc_read_reg32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", ++ __func__, greset.d32, ++ dwc_read_reg32(&global_regs->gnptxsts)); ++ break; ++ } ++ dwc_udelay(1); ++ } while (greset.b.txfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_udelay(1); ++} ++ ++/** ++ * Flush Rx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__); ++ /* ++ * ++ */ ++ greset.b.rxfflsh = 1; ++ dwc_write_reg32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = dwc_read_reg32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ break; ++ } ++ dwc_udelay(1); ++ } while (greset.b.rxfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_udelay(1); ++} ++ ++/** ++ * Do core a soft reset of the core. Be careful with this because it ++ * resets all the internal state machines of the core. ++ */ ++void dwc_otg_core_reset(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); ++ /* Wait for AHB master IDLE state. */ ++ do { ++ dwc_udelay(10); ++ greset.d32 = dwc_read_reg32(&global_regs->grstctl); ++ if (++count > 100000) { ++ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ return; ++ } ++ } ++ while (greset.b.ahbidle == 0); ++ ++ /* Core Soft Reset */ ++ count = 0; ++ greset.b.csftrst = 1; ++ dwc_write_reg32(&global_regs->grstctl, greset.d32); ++ do { ++ greset.d32 = dwc_read_reg32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", ++ __func__, greset.d32); ++ break; ++ } ++ dwc_udelay(1); ++ } ++ while (greset.b.csftrst == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_mdelay(100); ++} ++ ++uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); ++} ++ ++uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); ++} ++ ++/** ++ * Register HCD callbacks. The callbacks are used to start and stop ++ * the HCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the HCD callback structure. ++ * @param p pointer to be passed to callback function (usb_hcd*). ++ */ ++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if, ++ dwc_otg_cil_callbacks_t * cb, void *p) ++{ ++ core_if->hcd_cb = cb; ++ cb->p = p; ++} ++ ++/** ++ * Register PCD callbacks. The callbacks are used to start and stop ++ * the PCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the PCD callback structure. ++ * @param p pointer to be passed to callback function (pcd*). ++ */ ++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if, ++ dwc_otg_cil_callbacks_t * cb, void *p) ++{ ++ core_if->pcd_cb = cb; ++ cb->p = p; ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function writes isoc data per 1 (micro)frame into tx fifo ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ uint32_t len = 0; ++ uint32_t dwords; ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ++ ep_regs = core_if->dev_if->in_ep_regs[ep->num]; ++ ++ len = ep->xfer_len - ep->xfer_count; ++ ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = ++ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, ep, 0); ++ ++ len = ep->xfer_len - ep->xfer_count; ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num, ++ txstatus.d32); ++ } ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ep->cur_pkt_addr; ++ ep->dma_addr = ep->cur_pkt_dma_addr; ++ ++ if (ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ deptsiz.b.mc = deptsiz.b.pktcnt; ++ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ dwc_write_reg32(& ++ (core_if->dev_if->in_ep_regs[ep->num]-> ++ diepdma), (uint32_t) ep->dma_addr); ++ } ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz, deptsiz.d32); ++ ++ if (core_if->dma_enable) { ++ dwc_write_reg32(& ++ (core_if->dev_if->out_ep_regs[ep->num]-> ++ doepdma), (uint32_t) ep->dma_addr); ++ } ++ } ++ ++ /** Enable endpoint, clear nak */ ++ ++ depctl.d32 = 0; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ep->next_frame = dsts.b.soffn + ep->bInterval; ++ ++ if (ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } else { ++ ep->next_frame += ep->bInterval; ++ ++ if (ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ dwc_modify_reg32(addr, 0, depctl.d32); ++ depctl.d32 = dwc_read_reg32(addr); ++ ++ if (ep->is_in && core_if->dma_enable == 0) { ++ write_isoc_frame_data(core_if, ep); ++ } ++ ++} ++#endif /* DWC_EN_ISOC */ ++ ++static void dwc_otg_set_uninitialized(int32_t * p, int size) ++{ ++ int i; ++ for (i = 0; i < size; i++) { ++ p[i] = -1; ++ } ++} ++ ++static int dwc_otg_param_initialized(int32_t val) ++{ ++ return val != -1; ++} ++ ++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params)); ++ if (!core_if->core_params) { ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_otg_set_uninitialized((int32_t *) core_if->core_params, ++ sizeof(*core_if->core_params) / ++ sizeof(int32_t)); ++ DWC_PRINTF("Setting default values for core params\n"); ++ dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default); ++ dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default); ++ dwc_otg_set_param_dma_desc_enable(core_if, ++ dwc_param_dma_desc_enable_default); ++ dwc_otg_set_param_opt(core_if, dwc_param_opt_default); ++ dwc_otg_set_param_dma_burst_size(core_if, ++ dwc_param_dma_burst_size_default); ++ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, ++ dwc_param_host_support_fs_ls_low_power_default); ++ dwc_otg_set_param_enable_dynamic_fifo(core_if, ++ dwc_param_enable_dynamic_fifo_default); ++ dwc_otg_set_param_data_fifo_size(core_if, ++ dwc_param_data_fifo_size_default); ++ dwc_otg_set_param_dev_rx_fifo_size(core_if, ++ dwc_param_dev_rx_fifo_size_default); ++ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, ++ dwc_param_dev_nperio_tx_fifo_size_default); ++ dwc_otg_set_param_host_rx_fifo_size(core_if, ++ dwc_param_host_rx_fifo_size_default); ++ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, ++ dwc_param_host_nperio_tx_fifo_size_default); ++ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, ++ dwc_param_host_perio_tx_fifo_size_default); ++ dwc_otg_set_param_max_transfer_size(core_if, ++ dwc_param_max_transfer_size_default); ++ dwc_otg_set_param_max_packet_count(core_if, ++ dwc_param_max_packet_count_default); ++ dwc_otg_set_param_host_channels(core_if, ++ dwc_param_host_channels_default); ++ dwc_otg_set_param_dev_endpoints(core_if, ++ dwc_param_dev_endpoints_default); ++ dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default); ++ dwc_otg_set_param_speed(core_if, dwc_param_speed_default); ++ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, ++ dwc_param_host_ls_low_power_phy_clk_default); ++ dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default); ++ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, ++ dwc_param_phy_ulpi_ext_vbus_default); ++ dwc_otg_set_param_phy_utmi_width(core_if, ++ dwc_param_phy_utmi_width_default); ++ dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default); ++ dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default); ++ dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default); ++ dwc_otg_set_param_en_multiple_tx_fifo(core_if, ++ dwc_param_en_multiple_tx_fifo_default); ++ for (i = 0; i < 15; i++) { ++ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, ++ dwc_param_dev_perio_tx_fifo_size_default, ++ i); ++ } ++ ++ for (i = 0; i < 15; i++) { ++ dwc_otg_set_param_dev_tx_fifo_size(core_if, ++ dwc_param_dev_tx_fifo_size_default, ++ i); ++ } ++ dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default); ++ dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default); ++ dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default); ++ dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default); ++ dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default); ++ dwc_otg_set_param_tx_thr_length(core_if, ++ dwc_param_tx_thr_length_default); ++ dwc_otg_set_param_rx_thr_length(core_if, ++ dwc_param_rx_thr_length_default); ++ dwc_otg_set_param_ahb_thr_ratio(core_if, dwc_param_ahb_thr_ratio_default); ++ DWC_PRINTF("Finished setting default values for core params\n"); ++ return 0; ++} ++ ++uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->dma_enable; ++} ++ ++/* Checks if the parameter is outside of its valid range of values */ ++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ ++ (((_param_) < (_low_)) || \ ++ ((_param_) > (_high_))) ++ ++/* Parameter access functions */ ++int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int valid; ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { ++ DWC_WARN("Wrong value for otg_cap parameter\n"); ++ DWC_WARN("otg_cap parameter must be 0,1 or 2\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ valid = 1; ++ switch (val) { ++ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: ++ if (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ valid = 0; ++ break; ++ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: ++ if ((core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { ++ valid = 0; ++ } ++ break; ++ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: ++ /* always valid */ ++ break; ++ } ++ if (!valid) { ++ if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) { ++ DWC_ERROR ++ ("%d invalid for otg_cap paremter. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (((core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? ++ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->otg_cap = val; ++ out: ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->otg_cap; ++} ++ ++int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for opt parameter\n"); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->opt = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->opt; ++} ++ ++int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for dma enable\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) { ++ DWC_ERROR ++ ("%d invalid for dma_enable paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dma_enable = val; ++ if (val == 0) { ++ dwc_otg_set_param_dma_desc_enable(core_if, 0); ++ } ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_enable; ++} ++ ++int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for dma_enable\n"); ++ DWC_WARN("dma_desc_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) ++ && ((dwc_otg_get_param_dma_enable(core_if) == 0) ++ || (core_if->hwcfg4.b.desc_dma == 0))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dma_desc_enable)) { ++ DWC_ERROR ++ ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->dma_desc_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_desc_enable; ++} ++ ++int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for host_support_fs_low_power\n"); ++ DWC_WARN("host_support_fs_low_power must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->host_support_fs_ls_low_power = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * ++ core_if) ++{ ++ return core_if->core_params->host_support_fs_ls_low_power; ++} ++ ++int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for enable_dynamic_fifo\n"); ++ DWC_WARN("enable_dynamic_fifo must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->enable_dynamic_fifo)) { ++ DWC_ERROR ++ ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->enable_dynamic_fifo = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->enable_dynamic_fifo; ++} ++ ++int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 32, 32768)) { ++ DWC_WARN("Wrong value for data_fifo_size\n"); ++ DWC_WARN("data_fifo_size must be 32-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > core_if->hwcfg3.b.dfifo_depth) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->data_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for data_fifo_size parameter. Check HW configuration.\n", ++ val); ++ } ++ val = core_if->hwcfg3.b.dfifo_depth; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->data_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->data_fifo_size; ++} ++ ++int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for dev_rx_fifo_size\n"); ++ DWC_WARN("dev_rx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > dwc_read_reg32(&core_if->core_global_regs->grxfsiz)) { ++ if(dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) { ++ DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val); ++ } ++ val = dwc_read_reg32(&core_if->core_global_regs->grxfsiz); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_rx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_rx_fifo_size; ++} ++ ++int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for dev_nperio_tx_fifo\n"); ++ DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_nperio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_nperio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_nperio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_rx_fifo_size\n"); ++ DWC_WARN("host_rx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > dwc_read_reg32(&core_if->core_global_regs->grxfsiz)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_rx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_rx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = dwc_read_reg32(&core_if->core_global_regs->grxfsiz); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_rx_fifo_size = val; ++ return retval; ++ ++} ++ ++int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_rx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n"); ++ DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_nperio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_nperio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_nperio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_perio_tx_fifo_size\n"); ++ DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ++ ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_perio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_perio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_perio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) { ++ DWC_WARN("Wrong value for max_transfer_size\n"); ++ DWC_WARN("max_transfer_size must be 2047-524288\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->max_transfer_size)) { ++ DWC_ERROR ++ ("%d invalid for max_transfer_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) - ++ 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->max_transfer_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->max_transfer_size; ++} ++ ++int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 15, 511)) { ++ DWC_WARN("Wrong value for max_packet_count\n"); ++ DWC_WARN("max_packet_count must be 15-511\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->max_packet_count)) { ++ DWC_ERROR ++ ("%d invalid for max_packet_count. Check HW configuration.\n", ++ val); ++ } ++ val = ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->max_packet_count = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->max_packet_count; ++} ++ ++int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 1, 16)) { ++ DWC_WARN("Wrong value for host_channels\n"); ++ DWC_WARN("host_channels must be 1-16\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (core_if->hwcfg2.b.num_host_chan + 1)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_channels)) { ++ DWC_ERROR ++ ("%d invalid for host_channels. Check HW configurations.\n", ++ val); ++ } ++ val = (core_if->hwcfg2.b.num_host_chan + 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_channels = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_channels; ++} ++ ++int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 1, 15)) { ++ DWC_WARN("Wrong value for dev_endpoints\n"); ++ DWC_WARN("dev_endpoints must be 1-15\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (core_if->hwcfg2.b.num_dev_ep)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_endpoints)) { ++ DWC_ERROR ++ ("%d invalid for dev_endpoints. Check HW configurations.\n", ++ val); ++ } ++ val = core_if->hwcfg2.b.num_dev_ep; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_endpoints = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_endpoints; ++} ++ ++int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { ++ DWC_WARN("Wrong value for phy_type\n"); ++ DWC_WARN("phy_type must be 0,1 or 2\n"); ++ return -DWC_E_INVALID; ++ } ++#ifndef NO_FS_PHY_HW_CHECKS ++ if ((val == DWC_PHY_TYPE_PARAM_UTMI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 1) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } else if ((val == DWC_PHY_TYPE_PARAM_ULPI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 2) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } else if ((val == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->hwcfg2.b.fs_phy_type == 1)) { ++ valid = 1; ++ } ++ if (!valid) { ++ if (dwc_otg_param_initialized(core_if->core_params->phy_type)) { ++ DWC_ERROR ++ ("%d invalid for phy_type. Check HW configurations.\n", ++ val); ++ } ++ if (core_if->hwcfg2.b.hs_phy_type) { ++ if ((core_if->hwcfg2.b.hs_phy_type == 3) || ++ (core_if->hwcfg2.b.hs_phy_type == 1)) { ++ val = DWC_PHY_TYPE_PARAM_UTMI; ++ } else { ++ val = DWC_PHY_TYPE_PARAM_ULPI; ++ } ++ } ++ retval = -DWC_E_INVALID; ++ } ++#endif ++ core_if->core_params->phy_type = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_type; ++} ++ ++int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for speed parameter\n"); ++ DWC_WARN("max_speed parameter must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ if ((val == 0) ++ && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) { ++ if (dwc_otg_param_initialized(core_if->core_params->speed)) { ++ DWC_ERROR ++ ("%d invalid for speed paremter. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_otg_get_param_phy_type(core_if) == ++ DWC_PHY_TYPE_PARAM_FS ? 1 : 0); ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->speed = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->speed; ++} ++ ++int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN ++ ("Wrong value for host_ls_low_power_phy_clk parameter\n"); ++ DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) ++ && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) { ++ if(dwc_otg_param_initialized(core_if->core_params->host_ls_low_power_phy_clk)) { ++ DWC_ERROR("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_otg_get_param_phy_type(core_if) == ++ DWC_PHY_TYPE_PARAM_FS) ? ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_ls_low_power_phy_clk = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_ls_low_power_phy_clk; ++} ++ ++int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for phy_ulpi_ddr\n"); ++ DWC_WARN("phy_upli_ddr must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_ulpi_ddr = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_ulpi_ddr; ++} ++ ++int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n"); ++ DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_ulpi_ext_vbus = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_ulpi_ext_vbus; ++} ++ ++int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) { ++ DWC_WARN("Wrong valaue for phy_utmi_width\n"); ++ DWC_WARN("phy_utmi_width must be 8 or 16\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_utmi_width = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_utmi_width; ++} ++ ++int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for ulpi_fs_ls\n"); ++ DWC_WARN("ulpi_fs_ls must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->ulpi_fs_ls = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ulpi_fs_ls; ++} ++ ++int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for ts_dline\n"); ++ DWC_WARN("ts_dline must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->ts_dline = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ts_dline; ++} ++ ++int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for i2c_enable\n"); ++ DWC_WARN("i2c_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++#ifndef NO_FS_PHY_HW_CHECK ++ if (val == 1 && core_if->hwcfg3.b.i2c == 0) { ++ if(dwc_otg_param_initialized(core_if->core_params->i2c_enable)) { ++ DWC_ERROR("%d invalid for i2c_enable. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++#endif ++ ++ core_if->core_params->i2c_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->i2c_enable; ++} ++ ++int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val, int fifo_num) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { ++ DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n"); ++ DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[fifo_num]))) { ++ if(dwc_otg_param_initialized(core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) { ++ DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", ++ val, fifo_num); ++ } ++ val = (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[fifo_num])); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num) ++{ ++ return core_if->core_params->dev_perio_tx_fifo_size[fifo_num]; ++} ++ ++int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n"); ++ DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) { ++ if(dwc_otg_param_initialized(core_if->core_params->en_multiple_tx_fifo)) { ++ DWC_ERROR("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->en_multiple_tx_fifo = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->en_multiple_tx_fifo; ++} ++ ++int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val, ++ int fifo_num) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { ++ DWC_WARN("Wrong value for dev_tx_fifo_size\n"); ++ DWC_WARN("dev_tx_fifo_size must be 4-768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[fifo_num]))) { ++ if(dwc_otg_param_initialized(core_if->core_params->dev_tx_fifo_size[fifo_num])) { ++ DWC_ERROR("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n", ++ val, fifo_num); ++ } ++ val = (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[fifo_num])); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_tx_fifo_size[fifo_num] = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num) ++{ ++ return core_if->core_params->dev_tx_fifo_size[fifo_num]; ++} ++ ++int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 7)) { ++ DWC_WARN("Wrong value for thr_ctl\n"); ++ DWC_WARN("thr_ctl must be 0-7\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val != 0) && ++ (!dwc_otg_get_param_dma_enable(core_if) || ++ !core_if->hwcfg4.b.ded_fifo_en)) { ++ if(dwc_otg_param_initialized(core_if->core_params->thr_ctl)) { ++ DWC_ERROR("%d invalid for parameter thr_ctl. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->thr_ctl = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->thr_ctl; ++} ++ ++int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for lpm_enable\n"); ++ DWC_WARN("lpm_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val && !core_if->hwcfg3.b.otg_lpm_en) { ++ if(dwc_otg_param_initialized(core_if->core_params->lpm_enable)) { ++ DWC_ERROR("%d invalid for parameter lpm_enable. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->lpm_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->lpm_enable; ++} ++ ++int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { ++ DWC_WARN("Wrong valaue for tx_thr_length\n"); ++ DWC_WARN("tx_thr_length must be 8 - 128\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->tx_thr_length = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->tx_thr_length; ++} ++ ++int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { ++ DWC_WARN("Wrong valaue for rx_thr_length\n"); ++ DWC_WARN("rx_thr_length must be 8 - 128\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->rx_thr_length = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->rx_thr_length; ++} ++ ++int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 1, 1) && ++ DWC_OTG_PARAM_TEST(val, 4, 4) && ++ DWC_OTG_PARAM_TEST(val, 8, 8) && ++ DWC_OTG_PARAM_TEST(val, 16, 16) && ++ DWC_OTG_PARAM_TEST(val, 32, 32) && ++ DWC_OTG_PARAM_TEST(val, 64, 64) && ++ DWC_OTG_PARAM_TEST(val, 128, 128) && ++ DWC_OTG_PARAM_TEST(val, 256, 256)) { ++ DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->dma_burst_size = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_burst_size; ++} ++ ++int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) { ++ if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) { ++ DWC_ERROR("%d invalid for parameter pti_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->pti_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->pti_enable; ++} ++ ++int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) { ++ DWC_ERROR("%d invalid for parameter mpi_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->mpi_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->mpi_enable; ++} ++ ++int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val); ++ DWC_WARN("ic_usb_cap must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val && (core_if->hwcfg3.b.otg_enable_ic_usb == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) { ++ DWC_ERROR("%d invalid for parameter ic_usb_cap. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->ic_usb_cap = val; ++ return retval; ++} ++int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ic_usb_cap; ++} ++ ++int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if(DWC_OTG_PARAM_TEST(val, 0, 3)) { ++ DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val); ++ DWC_WARN("ahb_thr_ratio must be 0 - 3\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if(val && (core_if->snpsid < OTG_CORE_REV_2_81a || !dwc_otg_get_param_thr_ctl(core_if))) { ++ valid = 0; ++ } else if(val && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) < 4)) { ++ valid = 0; ++ } ++ if(valid == 0) { ++ if(dwc_otg_param_initialized(core_if->core_params->ahb_thr_ratio)) { ++ DWC_ERROR("%d invalid for parameter ahb_thr_ratio. Chack HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ ++ core_if->core_params->ahb_thr_ratio = val; ++ return retval; ++} ++int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ahb_thr_ratio; ++} ++ ++ ++uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.hstnegscs; ++} ++ ++uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.sesreqscs; ++} ++ ++void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++ otgctl.b.hnpreq = val; ++ dwc_write_reg32(&core_if->core_global_regs->gotgctl, otgctl.d32); ++} ++ ++uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->snpsid; ++} ++ ++uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.currmod; ++} ++ ++uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->gusbcfg); ++ return usbcfg.b.hnpcap; ++} ++ ++void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->gusbcfg); ++ usbcfg.b.hnpcap = val; ++ dwc_write_reg32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); ++} ++ ++uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->gusbcfg); ++ return usbcfg.b.srpcap; ++} ++ ++void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->gusbcfg); ++ usbcfg.b.srpcap = val; ++ dwc_write_reg32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); ++} ++ ++uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if) ++{ ++ dcfg_data_t dcfg; ++ dcfg.d32 = -1; //GRAYG ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if); ++ if (NULL == core_if) ++ DWC_ERROR("reg request with NULL core_if\n"); ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__, ++ core_if, core_if->dev_if); ++ if (NULL == core_if->dev_if) ++ DWC_ERROR("reg request with NULL dev_if\n"); ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->" ++ "dev_global_regs(%p)\n", __func__, ++ core_if, core_if->dev_if, ++ core_if->dev_if->dev_global_regs); ++ if (NULL == core_if->dev_if->dev_global_regs) ++ DWC_ERROR("reg request with NULL dev_global_regs\n"); ++ else { ++ DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->" ++ "dev_global_regs(%p)->dcfg = %p\n", __func__, ++ core_if, core_if->dev_if, ++ core_if->dev_if->dev_global_regs, ++ &core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); ++ } ++ return dcfg.b.devspd; ++} ++ ++void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dcfg_data_t dcfg; ++ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); ++ return hprt0.b.prtconnsts; ++} ++ ++uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ return dsts.b.enumspd; ++} ++ ++uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); ++ return hprt0.b.prtpwr; ++ ++} ++ ++void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); ++ hprt0.b.prtpwr = val; ++ dwc_write_reg32(core_if->host_if->hprt0, val); ++} ++ ++uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); ++ return hprt0.b.prtsusp; ++ ++} ++ ++void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); ++ hprt0.b.prtsusp = val; ++ dwc_write_reg32(core_if->host_if->hprt0, val); ++} ++ ++void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); ++ hprt0.b.prtres = val; ++ dwc_write_reg32(core_if->host_if->hprt0, val); ++} ++ ++uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if) ++{ ++ dctl_data_t dctl; ++ dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl); ++ return dctl.b.rmtwkupsig; ++} ++ ++uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ ++ DWC_ASSERT(! ++ ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts), ++ "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n", ++ core_if->lx_state, lpmcfg.b.prt_sleep_sts); ++ ++ return lpmcfg.b.prt_sleep_sts; ++} ++ ++uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.rem_wkup_en; ++} ++ ++uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.appl_resp; ++} ++ ++void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.appl_resp = val; ++ dwc_write_reg32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.hsic_connect; ++} ++ ++void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.hsic_connect = val; ++ dwc_write_reg32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.inv_sel_hsic; ++ ++} ++ ++void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.inv_sel_hsic = val; ++ dwc_write_reg32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++} ++ ++void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dwc_write_reg32(&core_if->core_global_regs->gotgctl, val); ++} ++ ++uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(&core_if->core_global_regs->gusbcfg); ++} ++ ++void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dwc_write_reg32(&core_if->core_global_regs->gusbcfg, val); ++} ++ ++uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(&core_if->core_global_regs->grxfsiz); ++} ++ ++void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dwc_write_reg32(&core_if->core_global_regs->grxfsiz, val); ++} ++ ++uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz); ++} ++ ++void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dwc_write_reg32(&core_if->core_global_regs->gnptxfsiz, val); ++} ++ ++uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(&core_if->core_global_regs->gpvndctl); ++} ++ ++void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dwc_write_reg32(&core_if->core_global_regs->gpvndctl, val); ++} ++ ++uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(&core_if->core_global_regs->ggpio); ++} ++ ++void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dwc_write_reg32(&core_if->core_global_regs->ggpio, val); ++} ++ ++uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(core_if->host_if->hprt0); ++ ++} ++ ++void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dwc_write_reg32(core_if->host_if->hprt0, val); ++} ++ ++uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(&core_if->core_global_regs->guid); ++} ++ ++void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dwc_write_reg32(&core_if->core_global_regs->guid, val); ++} ++ ++uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return dwc_read_reg32(&core_if->core_global_regs->hptxfsiz); ++} +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,1143 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ ++ * $Revision: #99 $ ++ * $Date: 2009/04/21 $ ++ * $Change: 1237466 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CIL_H__) ++#define __DWC_CIL_H__ ++ ++//#define HW2937_WORKAROUND ++#define DBG_HW2937 0x400 ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_regs.h" ++ ++#include "dwc_otg_core_if.h" ++ ++/** ++ * @file ++ * This file contains the interface to the Core Interface Layer. ++ */ ++ ++#ifdef DWC_UTE_CFI ++ ++#define MAX_DMA_DESCS_PER_EP 256 ++ ++/** ++ * Enumeration for the data buffer mode ++ */ ++typedef enum _data_buffer_mode { ++ BM_STANDARD = 0, /* data buffer is in normal mode */ ++ BM_SG = 1, /* data buffer uses the scatter/gather mode */ ++ BM_CONCAT = 2, /* data buffer uses the concatenation mode */ ++ BM_CIRCULAR = 3, /* data buffer uses the circular DMA mode */ ++ BM_ALIGN = 4 /* data buffer is in buffer alignment mode */ ++} data_buffer_mode_e; ++#endif //DWC_UTE_CFI ++ ++/** Macros defined for DWC OTG HW Release verison */ ++ ++#define OTG_CORE_REV_2_60a 0x4F54260A ++#define OTG_CORE_REV_2_71a 0x4F54271A ++#define OTG_CORE_REV_2_72a 0x4F54272A ++#define OTG_CORE_REV_2_80a 0x4F54280A ++#define OTG_CORE_REV_2_81a 0x4F54281A ++#define OTG_CORE_REV_2_90a 0x4F54290A ++ ++/** ++ * Information for each ISOC packet. ++ */ ++typedef struct iso_pkt_info { ++ uint32_t offset; ++ uint32_t length; ++ int32_t status; ++} iso_pkt_info_t; ++ ++/** ++ * The dwc_ep structure represents the state of a single ++ * endpoint when acting in device mode. It contains the data items ++ * needed for an endpoint to be activated and transfer packets. ++ */ ++typedef struct dwc_ep { ++ /** EP number used for register address lookup */ ++ uint8_t num; ++ /** EP direction 0 = OUT */ ++ unsigned is_in:1; ++ /** EP active. */ ++ unsigned active:1; ++ ++ /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO ++ If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/ ++ unsigned tx_fifo_num:4; ++ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ ++ unsigned type:2; ++#define DWC_OTG_EP_TYPE_CONTROL 0 ++#define DWC_OTG_EP_TYPE_ISOC 1 ++#define DWC_OTG_EP_TYPE_BULK 2 ++#define DWC_OTG_EP_TYPE_INTR 3 ++ ++ /** DATA start PID for INTR and BULK EP */ ++ unsigned data_pid_start:1; ++ /** Frame (even/odd) for ISOC EP */ ++ unsigned even_odd_frame:1; ++ /** Max Packet bytes */ ++ unsigned maxpacket:11; ++ ++ /** Max Transfer size */ ++ uint32_t maxxfer; ++ ++ /** @name Transfer state */ ++ /** @{ */ ++ ++ /** ++ * Pointer to the beginning of the transfer buffer -- do not modify ++ * during transfer. ++ */ ++ ++ dwc_dma_t dma_addr; ++ ++ dwc_dma_t dma_desc_addr; ++ dwc_otg_dev_dma_desc_t *desc_addr; ++ ++ uint8_t *start_xfer_buff; ++ /** pointer to the transfer buffer */ ++ uint8_t *xfer_buff; ++ /** Number of bytes to transfer */ ++ unsigned xfer_len:19; ++ /** Number of bytes transferred. */ ++ unsigned xfer_count:19; ++ /** Sent ZLP */ ++ unsigned sent_zlp:1; ++ /** Total len for control transfer */ ++ unsigned total_len:19; ++ ++ /** stall clear flag */ ++ unsigned stall_clear_flag:1; ++ ++#ifdef DWC_UTE_CFI ++ /* The buffer mode */ ++ data_buffer_mode_e buff_mode; ++ ++ /* The chain of DMA descriptors. ++ * MAX_DMA_DESCS_PER_EP will be allocated for each active EP. ++ */ ++ dwc_otg_dma_desc_t *descs; ++ ++ /* The DMA address of the descriptors chain start */ ++ dma_addr_t descs_dma_addr; ++ /** This variable stores the length of the last enqueued request */ ++ uint32_t cfi_req_len; ++#endif //DWC_UTE_CFI ++ ++ /** Allocated DMA Desc count */ ++ uint32_t desc_cnt; ++ ++#ifdef DWC_EN_ISOC ++ /** ++ * Variables specific for ISOC EPs ++ * ++ */ ++ /** DMA addresses of ISOC buffers */ ++ dwc_dma_t dma_addr0; ++ dwc_dma_t dma_addr1; ++ ++ dwc_dma_t iso_dma_desc_addr; ++ dwc_otg_dev_dma_desc_t *iso_desc_addr; ++ ++ /** pointer to the transfer buffers */ ++ uint8_t *xfer_buff0; ++ uint8_t *xfer_buff1; ++ ++ /** number of ISOC Buffer is processing */ ++ uint32_t proc_buf_num; ++ /** Interval of ISOC Buffer processing */ ++ uint32_t buf_proc_intrvl; ++ /** Data size for regular frame */ ++ uint32_t data_per_frame; ++ ++ /* todo - pattern data support is to be implemented in the future */ ++ /** Data size for pattern frame */ ++ uint32_t data_pattern_frame; ++ /** Frame number of pattern data */ ++ uint32_t sync_frame; ++ ++ /** bInterval */ ++ uint32_t bInterval; ++ /** ISO Packet number per frame */ ++ uint32_t pkt_per_frm; ++ /** Next frame num for which will be setup DMA Desc */ ++ uint32_t next_frame; ++ /** Number of packets per buffer processing */ ++ uint32_t pkt_cnt; ++ /** Info for all isoc packets */ ++ iso_pkt_info_t *pkt_info; ++ /** current pkt number */ ++ uint32_t cur_pkt; ++ /** current pkt number */ ++ uint8_t *cur_pkt_addr; ++ /** current pkt number */ ++ uint32_t cur_pkt_dma_addr; ++#endif /* DWC_EN_ISOC */ ++ ++/** @} */ ++} dwc_ep_t; ++ ++/* ++ * Reasons for halting a host channel. ++ */ ++typedef enum dwc_otg_halt_status { ++ DWC_OTG_HC_XFER_NO_HALT_STATUS, ++ DWC_OTG_HC_XFER_COMPLETE, ++ DWC_OTG_HC_XFER_URB_COMPLETE, ++ DWC_OTG_HC_XFER_ACK, ++ DWC_OTG_HC_XFER_NAK, ++ DWC_OTG_HC_XFER_NYET, ++ DWC_OTG_HC_XFER_STALL, ++ DWC_OTG_HC_XFER_XACT_ERR, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN, ++ DWC_OTG_HC_XFER_BABBLE_ERR, ++ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, ++ DWC_OTG_HC_XFER_AHB_ERR, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, ++ DWC_OTG_HC_XFER_URB_DEQUEUE ++#ifdef HW2937_WORKAROUND ++ , DWC_OTG_HC_XFER_PAUSE_IN ++#endif ++} dwc_otg_halt_status_e; ++ ++/** ++ * Host channel descriptor. This structure represents the state of a single ++ * host channel when acting in host mode. It contains the data items needed to ++ * transfer packets to an endpoint via a host channel. ++ */ ++typedef struct dwc_hc { ++ /** Host channel number used for register address lookup */ ++ uint8_t hc_num; ++ ++ /** Device to access */ ++ unsigned dev_addr:7; ++ ++ /** EP to access */ ++ unsigned ep_num:4; ++ ++ /** EP direction. 0: OUT, 1: IN */ ++ unsigned ep_is_in:1; ++ ++ /** ++ * EP speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ unsigned speed:2; ++#define DWC_OTG_EP_SPEED_LOW 0 ++#define DWC_OTG_EP_SPEED_FULL 1 ++#define DWC_OTG_EP_SPEED_HIGH 2 ++ ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - DWC_OTG_EP_TYPE_CONTROL: 0 ++ * - DWC_OTG_EP_TYPE_ISOC: 1 ++ * - DWC_OTG_EP_TYPE_BULK: 2 ++ * - DWC_OTG_EP_TYPE_INTR: 3 ++ */ ++ unsigned ep_type:2; ++ ++ /** Max packet size in bytes */ ++ unsigned max_packet:11; ++ ++ /** ++ * PID for initial transaction. ++ * 0: DATA0,
++ * 1: DATA2,
++ * 2: DATA1,
++ * 3: MDATA (non-Control EP), ++ * SETUP (Control EP) ++ */ ++ unsigned data_pid_start:2; ++#define DWC_OTG_HC_PID_DATA0 0 ++#define DWC_OTG_HC_PID_DATA2 1 ++#define DWC_OTG_HC_PID_DATA1 2 ++#define DWC_OTG_HC_PID_MDATA 3 ++#define DWC_OTG_HC_PID_SETUP 3 ++ ++ /** Number of periodic transactions per (micro)frame */ ++ unsigned multi_count:2; ++ ++ /** @name Transfer State */ ++ /** @{ */ ++ ++ /** Pointer to the current transfer buffer position. */ ++ uint8_t *xfer_buff; ++ /** ++ * In Buffer DMA mode this buffer will be used ++ * if xfer_buff is not DWORD aligned. ++ */ ++ dwc_dma_t align_buff; ++ /** Total number of bytes to transfer. */ ++ uint32_t xfer_len; ++ /** Number of bytes transferred so far. */ ++ uint32_t xfer_count; ++ /** Packet count at start of transfer.*/ ++ uint16_t start_pkt_count; ++ ++ /** ++ * Flag to indicate whether the transfer has been started. Set to 1 if ++ * it has been started, 0 otherwise. ++ */ ++ uint8_t xfer_started; ++ ++ /** ++ * Set to 1 to indicate that a PING request should be issued on this ++ * channel. If 0, process normally. ++ */ ++ uint8_t do_ping; ++ ++ /** ++ * Set to 1 to indicate that the error count for this transaction is ++ * non-zero. Set to 0 if the error count is 0. ++ */ ++ uint8_t error_state; ++ ++ /** ++ * Set to 1 to indicate that this channel should be halted the next ++ * time a request is queued for the channel. This is necessary in ++ * slave mode if no request queue space is available when an attempt ++ * is made to halt the channel. ++ */ ++ uint8_t halt_on_queue; ++ ++ /** ++ * Set to 1 if the host channel has been halted, but the core is not ++ * finished flushing queued requests. Otherwise 0. ++ */ ++ uint8_t halt_pending; ++ ++ /** ++ * Reason for halting the host channel. ++ */ ++ dwc_otg_halt_status_e halt_status; ++ ++ /* ++ * Split settings for the host channel ++ */ ++ uint8_t do_split; /**< Enable split for the channel */ ++ uint8_t complete_split; /**< Enable complete split */ ++ uint8_t hub_addr; /**< Address of high speed hub */ ++ ++ uint8_t port_addr; /**< Port of the low/full speed device */ ++ /** Split transaction position ++ * One of the following values: ++ * - DWC_HCSPLIT_XACTPOS_MID ++ * - DWC_HCSPLIT_XACTPOS_BEGIN ++ * - DWC_HCSPLIT_XACTPOS_END ++ * - DWC_HCSPLIT_XACTPOS_ALL */ ++ uint8_t xact_pos; ++ ++ /** Set when the host channel does a short read. */ ++ uint8_t short_read; ++ ++ /** ++ * Number of requests issued for this channel since it was assigned to ++ * the current transfer (not counting PINGs). ++ */ ++ uint8_t requests; ++ ++ /** ++ * Queue Head for the transfer being processed by this channel. ++ */ ++ struct dwc_otg_qh *qh; ++ ++ /** @} */ ++ ++ /** Entry in list of host channels. */ ++ DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry; ++ ++ /** @name Descriptor DMA support */ ++ /** @{ */ ++ ++ /** Number of Transfer Descriptors */ ++ uint16_t ntd; ++ ++ /** Descriptor List DMA address */ ++ dwc_dma_t desc_list_addr; ++ ++ /** Scheduling micro-frame bitmap. */ ++ uint8_t schinfo; ++ ++ /** @} */ ++} dwc_hc_t; ++ ++/** ++ * The following parameters may be specified when starting the module. These ++ * parameters define how the DWC_otg controller should be configured. ++ */ ++typedef struct dwc_otg_core_params { ++ int32_t opt; ++ ++ /** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++ int32_t otg_cap; ++ ++ /** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++ int32_t dma_enable; ++ ++ /** ++ * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data ++ * FIFOs in device mode. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++ int32_t dma_desc_enable; ++ /** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++ int32_t dma_burst_size; /* Translate this to GAHBCFG values */ ++ ++ /** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++ int32_t speed; ++ /** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++ int32_t host_support_fs_ls_low_power; ++ ++ /** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++ int32_t host_ls_low_power_phy_clk; ++ ++ /** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++ int32_t enable_dynamic_fifo; ++ ++ /** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++ int32_t data_fifo_size; ++ ++ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++ int32_t dev_rx_fifo_size; ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t dev_nperio_tx_fifo_size; ++ ++ /** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_rx_fifo_size; ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_nperio_tx_fifo_size; ++ ++ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_perio_tx_fifo_size; ++ ++ /** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++ int32_t max_transfer_size; ++ ++ /** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++ int32_t max_packet_count; ++ ++ /** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++ int32_t host_channels; ++ ++ /** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++ int32_t dev_endpoints; ++ ++ /** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++ int32_t phy_type; ++ ++ /** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++ int32_t phy_utmi_width; ++ ++ /** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++ int32_t phy_ulpi_ddr; ++ ++ /** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++ int32_t phy_ulpi_ext_vbus; ++ ++ /** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++ int32_t i2c_enable; ++ ++ int32_t ulpi_fs_ls; ++ ++ int32_t ts_dline; ++ ++ /** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++ int32_t en_multiple_tx_fifo; ++ ++ /** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++ uint32_t thr_ctl; ++ ++ /** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t tx_thr_length; ++ ++ /** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t rx_thr_length; ++ ++ /** ++ * Specifies whether LPM (Link Power Management) support is enabled ++ */ ++ int32_t lpm_enable; ++ ++ /** Per Transfer Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t pti_enable; ++ ++ /** Multi Processor Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t mpi_enable; ++ ++ /** IS_USB Capability ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t ic_usb_cap; ++ ++ /** AHB Threshold Ratio ++ * 2'b00 AHB Threshold = MAC Threshold ++ * 2'b01 AHB Threshold = 1/2 MAC Threshold ++ * 2'b10 AHB Threshold = 1/4 MAC Threshold ++ * 2'b11 AHB Threshold = 1/8 MAC Threshold ++ */ ++ int32_t ahb_thr_ratio; ++ ++} dwc_otg_core_params_t; ++ ++#ifdef DEBUG ++struct dwc_otg_core_if; ++typedef struct hc_xfer_info { ++ struct dwc_otg_core_if *core_if; ++ dwc_hc_t *hc; ++} hc_xfer_info_t; ++#endif ++/* ++ * Device States ++ */ ++typedef enum dwc_otg_lx_state { ++ /** On state */ ++ DWC_OTG_L0, ++ /** LPM sleep state*/ ++ DWC_OTG_L1, ++ /** USB suspend state*/ ++ DWC_OTG_L2, ++ /** Off state*/ ++ DWC_OTG_L3 ++} dwc_otg_lx_state_e; ++ ++/** ++ * The dwc_otg_core_if structure contains information needed to manage ++ * the DWC_otg controller acting in either host or device mode. It ++ * represents the programming view of the controller as a whole. ++ */ ++struct dwc_otg_core_if { ++ /** Parameters that define how the core should be configured.*/ ++ dwc_otg_core_params_t *core_params; ++ ++ /** Core Global registers starting at offset 000h. */ ++ dwc_otg_core_global_regs_t *core_global_regs; ++ ++ /** Device-specific information */ ++ dwc_otg_dev_if_t *dev_if; ++ /** Host-specific information */ ++ dwc_otg_host_if_t *host_if; ++ ++ /** Value from SNPSID register */ ++ uint32_t snpsid; ++ ++ /* ++ * Set to 1 if the core PHY interface bits in USBCFG have been ++ * initialized. ++ */ ++ uint8_t phy_init_done; ++ ++ /* ++ * SRP Success flag, set by srp success interrupt in FS I2C mode ++ */ ++ uint8_t srp_success; ++ uint8_t srp_timer_started; ++ ++ /* Common configuration information */ ++ /** Power and Clock Gating Control Register */ ++ volatile uint32_t *pcgcctl; ++#define DWC_OTG_PCGCCTL_OFFSET 0xE00 ++ ++ /** Push/pop addresses for endpoints or host channels.*/ ++ uint32_t *data_fifo[MAX_EPS_CHANNELS]; ++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 ++#define DWC_OTG_DATA_FIFO_SIZE 0x1000 ++ ++ /** Total RAM for FIFOs (Bytes) */ ++ uint16_t total_fifo_size; ++ /** Size of Rx FIFO (Bytes) */ ++ uint16_t rx_fifo_size; ++ /** Size of Non-periodic Tx FIFO (Bytes) */ ++ uint16_t nperio_tx_fifo_size; ++ ++ /** 1 if DMA is enabled, 0 otherwise. */ ++ uint8_t dma_enable; ++ ++ /** 1 if DMA descriptor is enabled, 0 otherwise. */ ++ uint8_t dma_desc_enable; ++ ++ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t pti_enh_enable; ++ ++ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t multiproc_int_enable; ++ ++ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ ++ uint8_t en_multiple_tx_fifo; ++ ++ /** Set to 1 if multiple packets of a high-bandwidth transfer is in ++ * process of being queued */ ++ uint8_t queuing_high_bandwidth; ++ ++ /** Hardware Configuration -- stored here for convenience.*/ ++ hwcfg1_data_t hwcfg1; ++ hwcfg2_data_t hwcfg2; ++ hwcfg3_data_t hwcfg3; ++ hwcfg4_data_t hwcfg4; ++ ++ /** Host and Device Configuration -- stored here for convenience.*/ ++ hcfg_data_t hcfg; ++ dcfg_data_t dcfg; ++ ++ /** The operational State, during transations ++ * (a_host>>a_peripherial and b_device=>b_host) this may not ++ * match the core but allows the software to determine ++ * transitions. ++ */ ++ uint8_t op_state; ++ ++ /** ++ * Set to 1 if the HCD needs to be restarted on a session request ++ * interrupt. This is required if no connector ID status change has ++ * occurred since the HCD was last disconnected. ++ */ ++ uint8_t restart_hcd_on_session_req; ++ ++ /** HCD callbacks */ ++ /** A-Device is a_host */ ++#define A_HOST (1) ++ /** A-Device is a_suspend */ ++#define A_SUSPEND (2) ++ /** A-Device is a_peripherial */ ++#define A_PERIPHERAL (3) ++ /** B-Device is operating as a Peripheral. */ ++#define B_PERIPHERAL (4) ++ /** B-Device is operating as a Host. */ ++#define B_HOST (5) ++ ++ /** HCD callbacks */ ++ struct dwc_otg_cil_callbacks *hcd_cb; ++ /** PCD callbacks */ ++ struct dwc_otg_cil_callbacks *pcd_cb; ++ ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t p_tx_msk; ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t tx_msk; ++ ++ /** Workqueue object used for handling several interrupts */ ++ dwc_workq_t *wq_otg; ++ ++ /** Timer object used for handling "Wakeup Detected" Interrupt */ ++ dwc_timer_t *wkp_timer; ++ ++#ifdef DEBUG ++ uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; ++ ++ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; ++ dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS]; ++ ++ uint32_t hfnum_7_samples; ++ uint64_t hfnum_7_frrem_accum; ++ uint32_t hfnum_0_samples; ++ uint64_t hfnum_0_frrem_accum; ++ uint32_t hfnum_other_samples; ++ uint64_t hfnum_other_frrem_accum; ++#endif ++ ++#ifdef DWC_UTE_CFI ++ uint16_t pwron_rxfsiz; ++ uint16_t pwron_gnptxfsiz; ++ uint16_t pwron_txfsiz[15]; ++ ++ uint16_t init_rxfsiz; ++ uint16_t init_gnptxfsiz; ++ uint16_t init_txfsiz[15]; ++#endif ++ ++ /** Lx state of device */ ++ dwc_otg_lx_state_e lx_state; ++ ++}; ++ ++#ifdef DEBUG ++/* ++ * This function is called when transfer is timed out. ++ */ ++extern void hc_xfer_timeout(void *ptr); ++#endif ++ ++/* ++ * The following functions are functions for works ++ * using during handling some interrupts ++ */ ++extern void w_conn_id_status_change(void *p); ++ ++extern void w_wakeup_detected(void *p); ++ ++/* ++ * The following functions support initialization of the CIL driver component ++ * and the DWC_otg controller. ++ */ ++extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if); ++ ++/** @name Device CIL Functions ++ * The following functions support managing the DWC_otg controller in device ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if, ++ uint32_t * _dest); ++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep, int _dma); ++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if); ++ ++#ifdef DWC_EN_ISOC ++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep); ++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep); ++#endif /* DWC_EN_ISOC */ ++/**@}*/ ++ ++/** @name Host CIL Functions ++ * The following functions support managing the DWC_otg controller in host ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status); ++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if); ++ ++extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc); ++ ++/* Macro used to clear one channel interrupt */ ++#define clear_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcint_data_t hcint_clear = {.d32 = 0}; \ ++ hcint_clear.b._intr_ = 1; \ ++ dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \ ++} while (0) ++ ++/* ++ * Macro used to disable one channel interrupt. Channel interrupts are ++ * disabled when the channel is halted or released by the interrupt handler. ++ * There is no need to handle further interrupts of that type until the ++ * channel is re-assigned. In fact, subsequent handling may cause crashes ++ * because the channel structures are cleaned up when the channel is released. ++ */ ++#define disable_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcintmsk_data_t hcintmsk = {.d32 = 0}; \ ++ hcintmsk.b._intr_ = 1; \ ++ dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ ++} while (0) ++ ++/** ++ * This function Reads HPRT0 in preparation to modify. It keeps the ++ * WC bits 0 so that if they are read as 1, they won't clear when you ++ * write it back ++ */ ++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0); ++ hprt0.b.prtena = 0; ++ hprt0.b.prtconndet = 0; ++ hprt0.b.prtenchng = 0; ++ hprt0.b.prtovrcurrchng = 0; ++ return hprt0.d32; ++} ++ ++/**@}*/ ++ ++/** @name Common CIL Functions ++ * The following functions support managing the DWC_otg controller in either ++ * device or host mode. ++ */ ++/**@{*/ ++ ++extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, ++ uint8_t * dest, uint16_t bytes); ++ ++extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num); ++extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if); ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if) ++{ ++ return (dwc_read_reg32(&core_if->core_global_regs->gintsts) & ++ dwc_read_reg32(&core_if->core_global_regs->gintmsk)); ++} ++ ++/** ++ * This function returns the OTG Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if) ++{ ++ return (dwc_read_reg32(&core_if->core_global_regs->gotgint)); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the IN endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t * ++ core_if) ++{ ++ ++ uint32_t v; ++ ++ if (core_if->multiproc_int_enable) { ++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs-> ++ deachint) & dwc_read_reg32(&core_if->dev_if-> ++ dev_global_regs-> ++ deachintmsk); ++ } else { ++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) & ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ return (v & 0xffff); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the OUT endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t * ++ core_if) ++{ ++ uint32_t v; ++ ++ if (core_if->multiproc_int_enable) { ++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs-> ++ deachint) & dwc_read_reg32(&core_if->dev_if-> ++ dev_global_regs-> ++ deachintmsk); ++ } else { ++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) & ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ ++ return ((v & 0xffff0000) >> 16); ++} ++ ++/** ++ * This function returns the Device IN EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ uint32_t v, msk, emp; ++ ++ if (core_if->multiproc_int_enable) { ++ msk = ++ dwc_read_reg32(&dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num]); ++ emp = ++ dwc_read_reg32(&dev_if->dev_global_regs-> ++ dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } else { ++ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk); ++ emp = ++ dwc_read_reg32(&dev_if->dev_global_regs-> ++ dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } ++ ++ return v; ++} ++ ++/** ++ * This function returns the Device OUT EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t * ++ _core_if, dwc_ep_t * _ep) ++{ ++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if; ++ uint32_t v; ++ doepmsk_data_t msk = {.d32 = 0 }; ++ ++ if (_core_if->multiproc_int_enable) { ++ msk.d32 = ++ dwc_read_reg32(&dev_if->dev_global_regs-> ++ doepeachintmsk[_ep->num]); ++ if (_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = dwc_read_reg32(&dev_if->out_ep_regs[_ep->num]-> ++ doepint) & msk.d32; ++ } else { ++ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk); ++ if (_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = dwc_read_reg32(&dev_if->out_ep_regs[_ep->num]-> ++ doepint) & msk.d32; ++ } ++ return v; ++} ++ ++/** ++ * This function returns the Host All Channel Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t * ++ _core_if) ++{ ++ return (dwc_read_reg32(&_core_if->host_if->host_global_regs->haint)); ++} ++ ++static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t * ++ _core_if, dwc_hc_t * _hc) ++{ ++ return (dwc_read_reg32 ++ (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); ++} ++ ++/** ++ * This function returns the mode of the operation, host or device. ++ * ++ * @return 0 - Device Mode, 1 - Host Mode ++ */ ++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) & 0x1); ++} ++ ++/**@}*/ ++ ++/** ++ * DWC_otg CIL callback structure. This structure allows the HCD and ++ * PCD to register functions used for starting and stopping the PCD ++ * and HCD for role change on for a DRD. ++ */ ++typedef struct dwc_otg_cil_callbacks { ++ /** Start function for role change */ ++ int (*start) (void *_p); ++ /** Stop Function for role change */ ++ int (*stop) (void *_p); ++ /** Disconnect Function for role change */ ++ int (*disconnect) (void *_p); ++ /** Resume/Remote wakeup Function */ ++ int (*resume_wakeup) (void *_p); ++ /** Suspend function */ ++ int (*suspend) (void *_p); ++ /** Session Start (SRP) */ ++ int (*session_start) (void *_p); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ /** Sleep (switch to L0 state) */ ++ int (*sleep) (void *_p); ++#endif ++ /** Pointer passed to start() and stop() */ ++ void *p; ++} dwc_otg_cil_callbacks_t; ++ ++extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if, ++ dwc_otg_cil_callbacks_t * _cb, ++ void *_p); ++extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if, ++ dwc_otg_cil_callbacks_t * _cb, ++ void *_p); ++ ++#endif +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,846 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $ ++ * $Revision: #15 $ ++ * $Date: 2009/04/15 $ ++ * $Change: 1234129 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * This file contains the Common Interrupt handlers. ++ */ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++ ++#ifdef DEBUG ++inline const char *op_state_str(dwc_otg_core_if_t * core_if) ++{ ++ return (core_if->op_state == A_HOST ? "a_host" : ++ (core_if->op_state == A_SUSPEND ? "a_suspend" : ++ (core_if->op_state == A_PERIPHERAL ? "a_peripheral" : ++ (core_if->op_state == B_PERIPHERAL ? "b_peripheral" : ++ (core_if->op_state == B_HOST ? "b_host" : "unknown"))))); ++} ++#endif ++ ++/** This function will log a debug message ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", ++ dwc_otg_mode(core_if) ? "Host" : "Device"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.modemismatch = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** Start the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->start) { ++ core_if->hcd_cb->start(core_if->hcd_cb->p); ++ } ++} ++ ++/** Stop the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_stop(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->stop) { ++ core_if->hcd_cb->stop(core_if->hcd_cb->p); ++ } ++} ++ ++/** Disconnect the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_disconnect(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { ++ core_if->hcd_cb->disconnect(core_if->hcd_cb->p); ++ } ++} ++ ++/** Inform the HCD the a New Session has begun. Helper function for ++ * using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_session_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->session_start) { ++ core_if->hcd_cb->session_start(core_if->hcd_cb->p); ++ } ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * Inform the HCD about LPM sleep. ++ * Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_sleep(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->sleep) { ++ core_if->hcd_cb->sleep(core_if->hcd_cb->p); ++ } ++} ++#endif ++ ++/** Resume the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_resume(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) { ++ core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p); ++ } ++} ++ ++/** Start the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void pcd_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->start) { ++ core_if->pcd_cb->start(core_if->pcd_cb->p); ++ } ++} ++ ++/** Stop the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void pcd_stop(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->stop) { ++ core_if->pcd_cb->stop(core_if->pcd_cb->p); ++ } ++} ++ ++/** Suspend the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void pcd_suspend(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->suspend) { ++ core_if->pcd_cb->suspend(core_if->pcd_cb->p); ++ } ++} ++ ++/** Resume the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void pcd_resume(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++} ++ ++/** ++ * This function handles the OTG Interrupts. It reads the OTG ++ * Interrupt Register (GOTGINT) to determine what interrupt has ++ * occurred. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gotgint_data_t gotgint; ++ gotgctl_data_t gotgctl; ++ gintmsk_data_t gintmsk; ++ ++ gotgint.d32 = dwc_read_reg32(&global_regs->gotgint); ++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32, ++ op_state_str(core_if)); ++ ++ if (gotgint.b.sesenddet) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Session End Detected++ (%s)\n", ++ op_state_str(core_if)); ++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); ++ ++ if (core_if->op_state == B_HOST) { ++ pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ /* If not B_HOST and Device HNP still set. HNP ++ * Did not succeed!*/ ++ if (gotgctl.b.devhnpen) { ++ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); ++ __DWC_ERROR("Device Not Connected/Responding!\n"); ++ } ++ ++ /* If Session End Detected the B-Cable has ++ * been disconnected. */ ++ /* Reset PCD and Gadget driver to a ++ * clean state. */ ++ core_if->lx_state = DWC_OTG_L0; ++ pcd_stop(core_if); ++ } ++ gotgctl.d32 = 0; ++ gotgctl.b.devhnpen = 1; ++ dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0); ++ } ++ if (gotgint.b.sesreqsucstschng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Session Reqeust Success Status Change++\n"); ++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); ++ if (gotgctl.b.sesreqscs) { ++ if ((core_if->core_params->phy_type == ++ DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) { ++ core_if->srp_success = 1; ++ } else { ++ pcd_resume(core_if); ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ dwc_modify_reg32(&global_regs->gotgctl, ++ gotgctl.d32, 0); ++ } ++ } ++ } ++ if (gotgint.b.hstnegsucstschng) { ++ /* Print statements during the HNP interrupt handling ++ * can cause it to fail.*/ ++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); ++ if (gotgctl.b.hstnegscs) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ core_if->op_state = B_HOST; ++ /* ++ * Need to disable SOF interrupt immediately. ++ * When switching from device to host, the PCD ++ * interrupt handler won't handle the ++ * interrupt if host mode is already set. The ++ * HCD interrupt handler won't get called if ++ * the HCD state is HALT. This means that the ++ * interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, ++ gintmsk.d32, 0); ++ pcd_stop(core_if); ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ hcd_start(core_if); ++ core_if->op_state = B_HOST; ++ } ++ } else { ++ gotgctl.d32 = 0; ++ gotgctl.b.hnpreq = 1; ++ gotgctl.b.devhnpen = 1; ++ dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0); ++ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n"); ++ __DWC_ERROR("Device Not Connected/Responding\n"); ++ } ++ } ++ if (gotgint.b.hstnegdet) { ++ /* The disconnect interrupt is set at the same time as ++ * Host Negotiation Detected. During the mode ++ * switch all interrupts are cleared so the disconnect ++ * interrupt handler will not get executed. ++ */ ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Host Negotiation Detected++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Device")); ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", ++ core_if->op_state); ++ hcd_disconnect(core_if); ++ pcd_start(core_if); ++ core_if->op_state = A_PERIPHERAL; ++ } else { ++ /* ++ * Need to disable SOF interrupt immediately. When ++ * switching from device to host, the PCD interrupt ++ * handler won't handle the interrupt if host mode is ++ * already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that ++ * the interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, gintmsk.d32, 0); ++ pcd_stop(core_if); ++ hcd_start(core_if); ++ core_if->op_state = A_HOST; ++ } ++ } ++ if (gotgint.b.adevtoutchng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "A-Device Timeout Change++\n"); ++ } ++ if (gotgint.b.debdone) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n"); ++ } ++ ++ /* Clear GOTGINT */ ++ dwc_write_reg32(&core_if->core_global_regs->gotgint, gotgint.d32); ++ ++ return 1; ++} ++ ++void w_conn_id_status_change(void *p) ++{ ++ dwc_otg_core_if_t *core_if = p; ++ uint32_t count = 0; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); ++ ++ /* B-Device connector (Device Mode) */ ++ if (gotgctl.b.conidsts) { ++ /* Wait for switch to device mode. */ ++ while (!dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Peripheral")); ++ dwc_mdelay(100); ++ if (++count > 10000) ++ break; ++ } ++ DWC_ASSERT(++count < 10000, ++ "Connection id status change timed out"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ pcd_start(core_if); ++ } else { ++ /* A-Device connector (Host Mode) */ ++ while (!dwc_otg_is_host_mode(core_if)) { ++ DWC_PRINTF("Waiting for Host Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Peripheral")); ++ dwc_mdelay(100); ++ if (++count > 10000) ++ break; ++ } ++ DWC_ASSERT(++count < 10000, ++ "Connection id status change timed out"); ++ core_if->op_state = A_HOST; ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ hcd_start(core_if); ++ } ++} ++ ++/** ++ * This function handles the Connector ID Status Change Interrupt. It ++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this ++ * is a Device to Host Mode transition or a Host Mode to Device ++ * Transition. ++ * ++ * This only occurs when the cable is connected/removed from the PHY ++ * connector. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if) ++{ ++ ++ /* ++ * Need to disable SOF interrupt immediately. If switching from device ++ * to host, the PCD interrupt handler won't handle the interrupt if ++ * host mode is already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that the interrupt does ++ * not get handled and Linux complains loudly. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ ++ gintmsk.b.sofintr = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ " ++Connector ID Status Change Interrupt++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device")); ++ ++ /* ++ * Need to schedule a work, as there are possible DELAY function calls ++ */ ++ DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change, ++ core_if, "connection id status change"); ++ ++ /* Set flag and clear interrupt */ ++ gintsts.b.conidstschng = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device is initiating the Session ++ * Request Protocol to request the host to turn on bus power so a new ++ * session can begin. The handler responds by turning on bus power. If ++ * the DWC_otg controller is in low power mode, the handler brings the ++ * controller out of low power mode before turning on bus power. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ gintsts_data_t gintsts; ++ ++#ifndef DWC_HOST_ONLY ++ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINTF("SRP: Device mode\n"); ++ } else { ++ DWC_PRINTF("SRP: Host mode\n"); ++ ++ /* Turn on the port power bit. */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Start the Connection timer. So a message can be displayed ++ * if connect does not occur within 10 seconds. */ ++ hcd_session_start(core_if); ++ } ++#endif ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sessreqintr = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++void w_wakeup_detected(void *p) ++{ ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p; ++ /* ++ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms ++ * so that OPT tests pass with all PHYs). ++ */ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++#if 0 ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0); ++ dwc_udelay(10); ++#endif //0 ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32); ++// dwc_mdelay(70); ++ hprt0.b.prtres = 0; /* Resume */ ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n", ++ dwc_read_reg32(core_if->host_if->hprt0)); ++ ++ hcd_resume(core_if); ++ ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ ++} ++ ++/** ++ * This interrupt indicates that the DWC_otg controller has detected a ++ * resume or remote wakeup sequence. If the DWC_otg controller is in ++ * low power mode, the handler must brings the controller out of low ++ * power mode. The controller automatically begins resume ++ * signaling. The handler schedules a time to stop resume signaling. ++ */ ++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "++Resume and Remote Wakeup Detected Interrupt++\n"); ++ ++ DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs-> ++ dsts)); ++ if (core_if->lx_state == DWC_OTG_L2) { ++#ifdef PARTIAL_POWER_DOWN ++ if (core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32 = 0 }; ++ ++ power.d32 = dwc_read_reg32(core_if->pcgcctl); ++ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", ++ power.d32); ++ ++ power.b.stoppclk = 0; ++ dwc_write_reg32(core_if->pcgcctl, power.d32); ++ ++ power.b.pwrclmp = 0; ++ dwc_write_reg32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 0; ++ dwc_write_reg32(core_if->pcgcctl, power.d32); ++ } ++#endif ++ /* Clear the Remote Wakeup Signalling */ ++ dctl.b.rmtwkupsig = 1; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs-> ++ dctl, dctl.d32, 0); ++ ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb-> ++ p); ++ } ++ } else { ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ dwc_write_reg32(&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ } ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ } else { ++ if (core_if->lx_state != DWC_OTG_L1) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0); ++ ++ DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71); ++ } else { ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ } ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.wkupintr = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device has been disconnected from ++ * the root port. ++ */ ++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"), ++ op_state_str(core_if)); ++ ++/** @todo Consolidate this if statement. */ ++#ifndef DWC_HOST_ONLY ++ if (core_if->op_state == B_HOST) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ hcd_disconnect(core_if); ++ pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else if (dwc_otg_is_device_mode(core_if)) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++ if (gotgctl.b.hstsethnpen == 1) { ++ /* Do nothing, if HNP in process the OTG ++ * interrupt "Host Negotiation Detected" ++ * interrupt will do the mode switch. ++ */ ++ } else if (gotgctl.b.devhnpen == 0) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ hcd_disconnect(core_if); ++ pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n"); ++ } ++ } else { ++ if (core_if->op_state == A_HOST) { ++ /* A-Cable still connected but device disconnected. */ ++ hcd_disconnect(core_if); ++ } ++ } ++#endif ++ /* Change to L3(OFF) state */ ++ core_if->lx_state = DWC_OTG_L3; ++ ++ gintsts.d32 = 0; ++ gintsts.b.disconnect = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that SUSPEND state has been detected on ++ * the USB. ++ * ++ * For HNP the USB Suspend interrupt signals the change from ++ * "a_peripheral" to "a_host". ++ * ++ * When power management is enabled the core will be put in low power ++ * mode. ++ */ ++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ /* Check the Device status register to determine if the Suspend ++ * state is active. */ ++ dsts.d32 = ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); ++ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " ++ "HWCFG4.power Optimize=%d\n", ++ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz); ++ ++#ifdef PARTIAL_POWER_DOWN ++/** @todo Add a module parameter for power management. */ ++ ++ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_CIL, "suspend\n"); ++ ++ power.b.pwrclmp = 1; ++ dwc_write_reg32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 1; ++ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32); ++ ++ power.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32); ++ ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "disconnect?\n"); ++ } ++#endif ++ /* PCD callback for suspend. */ ++ pcd_suspend(core_if); ++ } else { ++ if (core_if->op_state == A_PERIPHERAL) { ++ DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n"); ++ /* Clear the a_peripheral flag, back to a_host. */ ++ pcd_stop(core_if); ++ hcd_start(core_if); ++ core_if->op_state = A_HOST; ++ } ++ } ++ ++ /* Change to L2(suspend) state */ ++ core_if->lx_state = DWC_OTG_L2; ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * This function hadles LPM transaction received interrupt. ++ */ ++static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ gintsts_data_t gintsts; ++ ++ if (!core_if->core_params->lpm_enable) { ++ DWC_PRINTF("Unexpected LPM interrupt\n"); ++ } ++ ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32); ++ ++ if (dwc_otg_is_host_mode(core_if)) { ++ hcd_sleep(core_if); ++ } else { ++ lpmcfg.b.hird_thres |= (1 << 4); ++ dwc_write_reg32(&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ } ++ ++ /* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */ ++ dwc_udelay(10); ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ /* Save the current state */ ++ core_if->lx_state = DWC_OTG_L1; ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.lpmtranrcvd = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ gintmsk_data_t gintmsk_common = {.d32 = 0 }; ++ gintmsk_common.b.wkupintr = 1; ++ gintmsk_common.b.sessreqintr = 1; ++ gintmsk_common.b.conidstschng = 1; ++ gintmsk_common.b.otgintr = 1; ++ gintmsk_common.b.modemismatch = 1; ++ gintmsk_common.b.disconnect = 1; ++ gintmsk_common.b.usbsuspend = 1; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ gintmsk_common.b.lpmtranrcvd = 1; ++#endif ++ /** @todo: The port interrupt occurs while in device ++ * mode. Added code to CIL to clear the interrupt for now! ++ */ ++ gintmsk_common.b.portintr = 1; ++ ++ gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk); ++#ifdef DEBUG ++ /* if any common interrupts set */ ++ if (gintsts.d32 & gintmsk_common.d32) { ++ DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n", ++ gintsts.d32, gintmsk.d32); ++ } ++#endif ++ ++ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); ++ ++} ++ ++/** ++ * Common interrupt handler. ++ * ++ * The common interrupts are those that occur in both Host and Device mode. ++ * This handler handles the following interrupts: ++ * - Mode Mismatch Interrupt ++ * - Disconnect Interrupt ++ * - OTG Interrupt ++ * - Connector ID Status Change Interrupt ++ * - Session Request Interrupt. ++ * - Resume / Remote Wakeup Detected Interrupt. ++ * - LPM Transaction Received Interrutp ++ * ++ */ ++int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ gintsts_data_t gintsts; ++ ++ gintsts.d32 = dwc_otg_read_common_intr(core_if); ++ ++ if (gintsts.b.modemismatch) { ++ retval |= dwc_otg_handle_mode_mismatch_intr(core_if); ++ } ++ if (gintsts.b.otgintr) { ++ retval |= dwc_otg_handle_otg_intr(core_if); ++ } ++ if (gintsts.b.conidstschng) { ++ retval |= dwc_otg_handle_conn_id_status_change_intr(core_if); ++ } ++ if (gintsts.b.disconnect) { ++ retval |= dwc_otg_handle_disconnect_intr(core_if); ++ } ++ if (gintsts.b.sessreqintr) { ++ retval |= dwc_otg_handle_session_req_intr(core_if); ++ } ++ if (gintsts.b.wkupintr) { ++ retval |= dwc_otg_handle_wakeup_detected_intr(core_if); ++ } ++ if (gintsts.b.usbsuspend) { ++ retval |= dwc_otg_handle_usb_suspend_intr(core_if); ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (gintsts.b.lpmtranrcvd) { ++ retval |= dwc_otg_handle_lpm_intr(core_if); ++ } ++#endif ++ ++ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) { ++ /* The port interrupt occurs while in device mode with HPRT0 ++ * Port Enable/Disable. ++ */ ++ gintsts.d32 = 0; ++ gintsts.b.portintr = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, ++ gintsts.d32); ++ retval |= 1; ++ ++ } ++ return retval; ++} +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_core_if.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_core_if.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_core_if.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_core_if.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,642 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $ ++ * $Revision: #4 $ ++ * $Date: 2008/12/18 $ ++ * $Change: 1155299 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#if !defined(__DWC_CORE_IF_H__) ++#define __DWC_CORE_IF_H__ ++ ++#include "dwc_os.h" ++ ++/** @file ++ * This file defines DWC_OTG Core API ++ */ ++ ++struct dwc_otg_core_if; ++typedef struct dwc_otg_core_if dwc_otg_core_if_t; ++ ++/** Maximum number of Periodic FIFOs */ ++#define MAX_PERIO_FIFOS 15 ++/** Maximum number of Periodic FIFOs */ ++#define MAX_TX_FIFOS 15 ++ ++/** Maximum number of Endpoints/HostChannels */ ++#define MAX_EPS_CHANNELS 16 ++ ++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr); ++extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if); ++ ++extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if); ++ ++extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if); ++extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if); ++ ++extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if); ++ ++/** This function should be called on every hardware interrupt. */ ++extern int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t * _core_if); ++ ++/** @name OTG Core Parameters */ ++/** @{ */ ++ ++/** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if); ++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 ++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 ++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 ++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ++ ++extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if); ++#define dwc_param_opt_default 1 ++ ++/** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_dma_enable_default 1 ++ ++/** ++ * When DMA mode is enabled specifies whether to use ++ * address DMA or DMA Descritor mode for accessing the data ++ * FIFOs in device mode. The driver will automatically detect ++ * the value for this parameter if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if); ++//#define dwc_param_dma_desc_enable_default 1 ++#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708 ++ ++/** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_dma_burst_size_default 32 ++ ++/** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if); ++#define dwc_param_speed_default 0 ++#define DWC_SPEED_PARAM_HIGH 0 ++#define DWC_SPEED_PARAM_FULL 1 ++ ++/** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t ++ * core_if); ++#define dwc_param_host_support_fs_ls_low_power_default 0 ++ ++/** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_host_ls_low_power_phy_clk_default 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 ++ ++/** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_enable_dynamic_fifo_default 1 ++ ++/** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if); ++//#define dwc_param_data_fifo_size_default 8192 ++#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_rx_fifo_size_default 1064 ++ ++/** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_dev_nperio_tx_fifo_size_default 1024 ++ ++/** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val, int fifo_num); ++extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int fifo_num); ++#define dwc_param_dev_perio_tx_fifo_size_default 256 ++ ++/** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if); ++//#define dwc_param_host_rx_fifo_size_default 1024 ++#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++//#define dwc_param_host_nperio_tx_fifo_size_default 1024 ++#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++//#define dwc_param_host_perio_tx_fifo_size_default 1024 ++#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708 ++ ++/** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_max_transfer_size_default 65535 ++ ++/** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if); ++#define dwc_param_max_packet_count_default 511 ++ ++/** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if); ++//#define dwc_param_host_channels_default 12 ++#define dwc_param_host_channels_default 8// Broadcom BCM2708 ++ ++/** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_endpoints_default 6 ++ ++/** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if); ++#define DWC_PHY_TYPE_PARAM_FS 0 ++#define DWC_PHY_TYPE_PARAM_UTMI 1 ++#define DWC_PHY_TYPE_PARAM_ULPI 2 ++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI ++ ++/** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if); ++//#define dwc_param_phy_utmi_width_default 16 ++#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708 ++ ++/** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if); ++#define dwc_param_phy_ulpi_ddr_default 0 ++ ++/** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if); ++#define DWC_PHY_ULPI_INTERNAL_VBUS 0 ++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 ++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS ++ ++/** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_i2c_enable_default 0 ++ ++extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if); ++#define dwc_param_ulpi_fs_ls_default 0 ++ ++extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if); ++#define dwc_param_ts_dline_default 0 ++ ++/** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_en_multiple_tx_fifo_default 1 ++ ++/** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num, int32_t val); ++extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num); ++#define dwc_param_dev_tx_fifo_size_default 256 ++ ++/** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num); ++#define dwc_param_thr_ctl_default 0 ++ ++/** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if); ++#define dwc_param_tx_thr_length_default 64 ++ ++/** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if); ++#define dwc_param_rx_thr_length_default 64 ++ ++/** ++ * Specifies whether LPM (Link Power Management) support is enabled ++ */ ++extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_lpm_enable_default 1 ++ ++/** ++ * Specifies whether PTI enhancement is enabled ++ */ ++extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_pti_enable_default 0 ++ ++/** ++ * Specifies whether MPI enhancement is enabled ++ */ ++extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_mpi_enable_default 0 ++ ++/** ++ * Specifies whether IC_USB capability is enabled ++ */ ++extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if); ++#define dwc_param_ic_usb_cap_default 0 ++ ++extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if); ++#define dwc_param_ahb_thr_ratio_default 0 ++ ++/** @} */ ++ ++/** @name Access to registers and bit-fields */ ++ ++/** ++ * Dump core registers and SPRAM ++ */ ++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if); ++ ++/** ++ * Get host negotiation status. ++ */ ++extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get srp status ++ */ ++extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Set hnpreq bit in the GOTGCTL register. ++ */ ++extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get Content of SNPSID register. ++ */ ++extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get current mode. ++ * Returns 0 if in device mode, and 1 if in host mode. ++ */ ++extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of hnpcapable field in the GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of hnpcapable field in the GUSBCFG register ++ */ ++extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of srpcapable field in the GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of srpcapable field in the GUSBCFG register ++ */ ++extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of devspeed field in the DCFG register ++ */ ++extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of devspeed field in the DCFG register ++ */ ++extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get the value of busconnected field from the HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Gets the device enumeration Speed. ++ */ ++extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of prtpwr field from the HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of prtpwr field from the HPRT0 register ++ */ ++extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of prtsusp field from the HPRT0 regsiter ++ */ ++extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of prtpwr field from the HPRT0 register ++ */ ++extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Set value of prtres field from the HPRT0 register ++ *FIXME Remove? ++ */ ++extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of rmtwkupsig bit in DCTL register ++ */ ++extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of prt_sleep_sts field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of rem_wkup_en field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of appl_resp field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of appl_resp field from the GLPMCFG register ++ */ ++extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of hsic_connect field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of hsic_connect field from the GLPMCFG register ++ */ ++extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of inv_sel_hsic field from the GLPMCFG register. ++ */ ++extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of inv_sel_hsic field from the GLPMFG register. ++ */ ++extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/* ++ * Some functions for accessing registers ++ */ ++ ++/** ++ * GOTGCTL register ++ */ ++extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GRXFSIZ register ++ */ ++extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GNPTXFSIZ register ++ */ ++extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GGPIO register ++ */ ++extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GUID register ++ */ ++extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GHPTXFSIZE ++ */ ++extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if); ++ ++/** @} */ ++ ++#endif /* __DWC_CORE_IF_H__ */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_dbg.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_dbg.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_dbg.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_dbg.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,113 @@ ++/* ========================================================================== ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DBG_H__ ++#define __DWC_OTG_DBG_H__ ++ ++/** @file ++ * This file defines debug levels. ++ * Debugging support vanishes in non-debug builds. ++ */ ++ ++/** ++ * The Debug Level bit-mask variable. ++ */ ++extern uint32_t g_dbg_lvl; ++/** ++ * Set the Debug Level variable. ++ */ ++static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new) ++{ ++ uint32_t old = g_dbg_lvl; ++ g_dbg_lvl = new; ++ return old; ++} ++ ++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ ++#define DBG_CIL (0x2) ++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug ++ * messages */ ++#define DBG_CILV (0x20) ++/** When debug level has the DBG_PCD bit set, display PCD (Device) debug ++ * messages */ ++#define DBG_PCD (0x4) ++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug ++ * messages */ ++#define DBG_PCDV (0x40) ++/** When debug level has the DBG_HCD bit set, display Host debug messages */ ++#define DBG_HCD (0x8) ++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug ++ * messages */ ++#define DBG_HCDV (0x80) ++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host ++ * mode. */ ++#define DBG_HCD_URB (0x800) ++ ++/** When debug level has any bit set, display debug messages */ ++#define DBG_ANY (0xFF) ++ ++/** All debug messages off */ ++#define DBG_OFF 0 ++ ++/** Prefix string for DWC_DEBUG print macros. */ ++#define USB_DWC "DWC_otg: " ++ ++/** ++ * Print a debug message when the Global debug level variable contains ++ * the bit defined in lvl. ++ * ++ * @param[in] lvl - Debug level, use one of the DBG_ constants above. ++ * @param[in] x - like printf ++ * ++ * Example:

++ * ++ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); ++ * ++ *
++ * results in:
++ * ++ * usb-DWC_otg: dwc_otg_cil_init(ca867000) ++ * ++ */ ++#ifdef DEBUG ++ ++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0) ++# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) ++ ++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) ++ ++#else ++ ++# define DWC_DEBUGPL(lvl, x...) do{}while(0) ++# define DWC_DEBUGP(x...) ++ ++# define CHK_DEBUG_LEVEL(level) (0) ++ ++#endif /*DEBUG*/ ++#endif +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_driver.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_driver.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_driver.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_driver.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,1577 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $ ++ * $Revision: #76 $ ++ * $Date: 2009/05/03 $ ++ * $Change: 1245589 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * The dwc_otg_driver module provides the initialization and cleanup entry ++ * points for the DWC_otg driver. This module will be dynamically installed ++ * after Linux is booted using the insmod command. When the module is ++ * installed, the dwc_otg_driver_init function is called. When the module is ++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called. ++ * ++ * This module also defines a data structure for the dwc_otg_driver, which is ++ * used in conjunction with the standard ARM lm_device structure. These ++ * structures allow the OTG driver to comply with the standard Linux driver ++ * model in which devices and drivers are registered with a bus driver. This ++ * has the benefit that Linux can expose attributes of the driver and device ++ * in its special sysfs file system. Users can then read or write files in ++ * this file system to perform diagnostics on the driver components or the ++ * device. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include /* permission constants */ ++#include ++#include ++ ++#ifdef LM_INTERFACE ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++#include ++#include ++#else ++/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure - ++ here we use definitions stolen from arm-integrator headers ++*/ ++#include ++#include ++#endif ++#include ++#include ++ ++#elif defined(PLATFORM_INTERFACE) ++ ++#include ++#include ++ ++#endif ++ ++# include ++ ++#include ++ ++ ++#include "dwc_os.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_hcd_if.h" ++ ++#define DWC_DRIVER_VERSION "2.90b 6-MAY-2010" ++#define DWC_DRIVER_DESC "HS OTG USB Controller driver" ++ ++static const char dwc_driver_name[] = "dwc_otg"; ++ ++extern int pcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++extern int hcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++ ++extern int pcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ); ++ ++extern void hcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ); ++ ++/*-------------------------------------------------------------------------*/ ++/* Encapsulate the module parameter settings */ ++ ++struct dwc_otg_driver_module_params { ++ int32_t opt; ++ int32_t otg_cap; ++ int32_t dma_enable; ++ int32_t dma_desc_enable; ++ int32_t dma_burst_size; ++ int32_t speed; ++ int32_t host_support_fs_ls_low_power; ++ int32_t host_ls_low_power_phy_clk; ++ int32_t enable_dynamic_fifo; ++ int32_t data_fifo_size; ++ int32_t dev_rx_fifo_size; ++ int32_t dev_nperio_tx_fifo_size; ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ int32_t host_rx_fifo_size; ++ int32_t host_nperio_tx_fifo_size; ++ int32_t host_perio_tx_fifo_size; ++ int32_t max_transfer_size; ++ int32_t max_packet_count; ++ int32_t host_channels; ++ int32_t dev_endpoints; ++ int32_t phy_type; ++ int32_t phy_utmi_width; ++ int32_t phy_ulpi_ddr; ++ int32_t phy_ulpi_ext_vbus; ++ int32_t i2c_enable; ++ int32_t ulpi_fs_ls; ++ int32_t ts_dline; ++ int32_t en_multiple_tx_fifo; ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++ uint32_t thr_ctl; ++ uint32_t tx_thr_length; ++ uint32_t rx_thr_length; ++ int32_t pti_enable; ++ int32_t mpi_enable; ++ int32_t lpm_enable; ++ int32_t ic_usb_cap; ++ int32_t ahb_thr_ratio; ++}; ++ ++static struct dwc_otg_driver_module_params dwc_otg_module_params = { ++ .opt = -1, ++ .otg_cap = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .dma_burst_size = -1, ++ .speed = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .enable_dynamic_fifo = -1, ++ .data_fifo_size = -1, ++ .dev_rx_fifo_size = -1, ++ .dev_nperio_tx_fifo_size = -1, ++ .dev_perio_tx_fifo_size = { ++ /* dev_perio_tx_fifo_size_1 */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .host_rx_fifo_size = -1, ++ .host_nperio_tx_fifo_size = -1, ++ .host_perio_tx_fifo_size = -1, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .dev_endpoints = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .ts_dline = -1, ++ .en_multiple_tx_fifo = -1, ++ .dev_tx_fifo_size = { ++ /* dev_tx_fifo_size */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .thr_ctl = -1, ++ .tx_thr_length = -1, ++ .rx_thr_length = -1, ++ .pti_enable = -1, ++ .mpi_enable = -1, ++ .lpm_enable = -1, ++ .ic_usb_cap = -1, ++ .ahb_thr_ratio = -1, ++}; ++ ++/** ++ * This function shows the Driver Version. ++ */ ++static ssize_t version_show(struct device_driver *dev, char *buf) ++{ ++ return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n", ++ DWC_DRIVER_VERSION); ++} ++ ++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); ++ ++/** ++ * Global Debug Level Mask. ++ */ ++uint32_t g_dbg_lvl = 0; /* OFF */ ++ ++/** ++ * This function shows the driver Debug Level. ++ */ ++static ssize_t dbg_level_show(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%0x\n", g_dbg_lvl); ++} ++ ++/** ++ * This function stores the driver Debug Level. ++ */ ++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, ++ size_t count) ++{ ++ g_dbg_lvl = simple_strtoul(buf, NULL, 16); ++ return count; ++} ++ ++static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show, ++ dbg_level_store); ++ ++/** ++ * This function is called during module intialization ++ * to pass module parameters to the DWC_OTG CORE. ++ */ ++static int set_parameters(dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ int i; ++ ++ if (dwc_otg_module_params.otg_cap != -1) { ++ retval += ++ dwc_otg_set_param_otg_cap(core_if, ++ dwc_otg_module_params.otg_cap); ++ } ++ if (dwc_otg_module_params.dma_enable != -1) { ++ retval += ++ dwc_otg_set_param_dma_enable(core_if, ++ dwc_otg_module_params. ++ dma_enable); ++ } ++ if (dwc_otg_module_params.dma_desc_enable != -1) { ++ retval += ++ dwc_otg_set_param_dma_desc_enable(core_if, ++ dwc_otg_module_params. ++ dma_desc_enable); ++ } ++ if (dwc_otg_module_params.opt != -1) { ++ retval += ++ dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt); ++ } ++ if (dwc_otg_module_params.dma_burst_size != -1) { ++ retval += ++ dwc_otg_set_param_dma_burst_size(core_if, ++ dwc_otg_module_params. ++ dma_burst_size); ++ } ++ if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) { ++ retval += ++ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, ++ dwc_otg_module_params. ++ host_support_fs_ls_low_power); ++ } ++ if (dwc_otg_module_params.enable_dynamic_fifo != -1) { ++ retval += ++ dwc_otg_set_param_enable_dynamic_fifo(core_if, ++ dwc_otg_module_params. ++ enable_dynamic_fifo); ++ } ++ if (dwc_otg_module_params.data_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_data_fifo_size(core_if, ++ dwc_otg_module_params. ++ data_fifo_size); ++ } ++ if (dwc_otg_module_params.dev_rx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_dev_rx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_rx_fifo_size); ++ } ++ if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_nperio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_rx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_rx_fifo_size(core_if, ++ dwc_otg_module_params.host_rx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ host_nperio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ host_perio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.max_transfer_size != -1) { ++ retval += ++ dwc_otg_set_param_max_transfer_size(core_if, ++ dwc_otg_module_params. ++ max_transfer_size); ++ } ++ if (dwc_otg_module_params.max_packet_count != -1) { ++ retval += ++ dwc_otg_set_param_max_packet_count(core_if, ++ dwc_otg_module_params. ++ max_packet_count); ++ } ++ if (dwc_otg_module_params.host_channels != -1) { ++ retval += ++ dwc_otg_set_param_host_channels(core_if, ++ dwc_otg_module_params. ++ host_channels); ++ } ++ if (dwc_otg_module_params.dev_endpoints != -1) { ++ retval += ++ dwc_otg_set_param_dev_endpoints(core_if, ++ dwc_otg_module_params. ++ dev_endpoints); ++ } ++ if (dwc_otg_module_params.phy_type != -1) { ++ retval += ++ dwc_otg_set_param_phy_type(core_if, ++ dwc_otg_module_params.phy_type); ++ } ++ if (dwc_otg_module_params.speed != -1) { ++ retval += ++ dwc_otg_set_param_speed(core_if, ++ dwc_otg_module_params.speed); ++ } ++ if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) { ++ retval += ++ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, ++ dwc_otg_module_params. ++ host_ls_low_power_phy_clk); ++ } ++ if (dwc_otg_module_params.phy_ulpi_ddr != -1) { ++ retval += ++ dwc_otg_set_param_phy_ulpi_ddr(core_if, ++ dwc_otg_module_params. ++ phy_ulpi_ddr); ++ } ++ if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) { ++ retval += ++ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, ++ dwc_otg_module_params. ++ phy_ulpi_ext_vbus); ++ } ++ if (dwc_otg_module_params.phy_utmi_width != -1) { ++ retval += ++ dwc_otg_set_param_phy_utmi_width(core_if, ++ dwc_otg_module_params. ++ phy_utmi_width); ++ } ++ if (dwc_otg_module_params.ulpi_fs_ls != -1) { ++ retval += ++ dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_otg_module_params.ulpi_fs_ls); ++ } ++ if (dwc_otg_module_params.ts_dline != -1) { ++ retval += ++ dwc_otg_set_param_ts_dline(core_if, ++ dwc_otg_module_params.ts_dline); ++ } ++ if (dwc_otg_module_params.i2c_enable != -1) { ++ retval += ++ dwc_otg_set_param_i2c_enable(core_if, ++ dwc_otg_module_params. ++ i2c_enable); ++ } ++ if (dwc_otg_module_params.en_multiple_tx_fifo != -1) { ++ retval += ++ dwc_otg_set_param_en_multiple_tx_fifo(core_if, ++ dwc_otg_module_params. ++ en_multiple_tx_fifo); ++ } ++ for (i = 0; i < 15; i++) { ++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { ++ retval += ++ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_perio_tx_fifo_size ++ [i], i); ++ } ++ } ++ ++ for (i = 0; i < 15; i++) { ++ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { ++ retval += dwc_otg_set_param_dev_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_tx_fifo_size ++ [i], i); ++ } ++ } ++ if (dwc_otg_module_params.thr_ctl != -1) { ++ retval += ++ dwc_otg_set_param_thr_ctl(core_if, ++ dwc_otg_module_params.thr_ctl); ++ } ++ if (dwc_otg_module_params.mpi_enable != -1) { ++ retval += ++ dwc_otg_set_param_mpi_enable(core_if, ++ dwc_otg_module_params. ++ mpi_enable); ++ } ++ if (dwc_otg_module_params.pti_enable != -1) { ++ retval += ++ dwc_otg_set_param_pti_enable(core_if, ++ dwc_otg_module_params. ++ pti_enable); ++ } ++ if (dwc_otg_module_params.lpm_enable != -1) { ++ retval += ++ dwc_otg_set_param_lpm_enable(core_if, ++ dwc_otg_module_params. ++ lpm_enable); ++ } ++ if (dwc_otg_module_params.ic_usb_cap != -1) { ++ retval += ++ dwc_otg_set_param_ic_usb_cap(core_if, ++ dwc_otg_module_params. ++ ic_usb_cap); ++ } ++ if (dwc_otg_module_params.tx_thr_length != -1) { ++ retval += ++ dwc_otg_set_param_tx_thr_length(core_if, ++ dwc_otg_module_params.tx_thr_length); ++ } ++ if (dwc_otg_module_params.rx_thr_length != -1) { ++ retval += ++ dwc_otg_set_param_rx_thr_length(core_if, ++ dwc_otg_module_params. ++ rx_thr_length); ++ } ++ if(dwc_otg_module_params.ahb_thr_ratio != -1) { ++ retval += ++ dwc_otg_set_param_ahb_thr_ratio(core_if, dwc_otg_module_params.ahb_thr_ratio); ++ } ++ return retval; ++} ++ ++/** ++ * This function is the top level interrupt handler for the Common ++ * (Device and host modes) interrupts. ++ */ ++static irqreturn_t dwc_otg_common_irq(int irq, void *dev) ++{ ++ dwc_otg_device_t *otg_dev = dev; ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_handle_common_intr(otg_dev->core_if); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function is called when a lm_device is unregistered with the ++ * dwc_otg_driver. This happens, for example, when the rmmod command is ++ * executed. The device may or may not be electrically present. If it is ++ * present, the driver stops device processing. Any resources used on behalf ++ * of this device are freed. ++ * ++ * @param _dev ++ */ ++#ifdef LM_INTERFACE ++static void dwc_otg_driver_remove( ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++static void dwc_otg_driver_remove( ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++static int dwc_otg_driver_remove( ++ struct platform_device *_dev ++#endif ++) ++ ++{ ++#ifdef LM_INTERFACE ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); ++ ++ if (!otg_dev) { ++ /* Memory allocation for the dwc_otg_device failed. */ ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++#ifdef PLATFORM_INTERFACE ++ return -ENOMEM; ++#else ++ return; ++#endif ++ } ++#ifndef DWC_DEVICE_ONLY ++ if (otg_dev->hcd) { ++ hcd_remove(_dev); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++#ifdef PLATFORM_INTERFACE ++ return -EINVAL; ++#else ++ return; ++#endif ++ } ++#endif ++ ++#ifndef DWC_HOST_ONLY ++ if (otg_dev->pcd) { ++ pcd_remove(_dev); ++ } ++#endif ++ /* ++ * Free the IRQ ++ */ ++ if (otg_dev->common_irq_installed) { ++#ifdef PLATFORM_INTERFACE ++ free_irq(platform_get_irq(_dev, 0), otg_dev); ++#else ++ free_irq(_dev->irq, otg_dev); ++#endif ++ } ++ ++ if (otg_dev->core_if) { ++ dwc_otg_cil_remove(otg_dev->core_if); ++ } ++ ++ /* ++ * Remove the device attributes ++ */ ++ dwc_otg_attr_remove(_dev); ++ ++ /* ++ * Return the memory. ++ */ ++ if (otg_dev->base) { ++ iounmap(otg_dev->base); ++ } ++ dwc_free(otg_dev); ++ ++ /* ++ * Clear the drvdata pointer. ++ */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, 0); ++#elif defined(PCI_INTERFACE) ++ release_mem_region(otg_dev->rsrc_start, otg_dev->rsrc_len); ++ pci_set_drvdata(_dev, 0); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, 0); ++ return 0; ++#endif ++} ++ ++/** ++ * This function is called when an lm_device is bound to a ++ * dwc_otg_driver. It creates the driver components required to ++ * control the device (CIL, HCD, and PCD) and it initializes the ++ * device. The driver components are stored in a dwc_otg_device ++ * structure. A reference to the dwc_otg_device is saved in the ++ * lm_device. This allows the driver to access the dwc_otg_device ++ * structure on subsequent calls to driver methods for this device. ++ * ++ * @param _dev Bus device ++ */ ++static int dwc_otg_driver_probe( ++#ifdef LM_INTERFACE ++struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++struct pci_dev *_dev, const struct pci_device_id *id ++#elif defined(PLATFORM_INTERFACE) ++struct platform_device *_dev ++#endif ++) ++{ ++ int retval = 0; ++ dwc_otg_device_t *dwc_otg_device; ++ int devirq; ++ ++ dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev); ++#ifdef LM_INTERFACE ++ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start); ++#elif defined(PCI_INTERFACE) ++ if (!id) { ++ DWC_ERROR("Invalid pci_device_id %p", id); ++ return -EINVAL; ++ } ++ ++ if (!_dev || (pci_enable_device(_dev) < 0)) { ++ DWC_ERROR("Invalid pci_device %p", _dev); ++ return -ENODEV; ++ } ++ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0)); ++ /* other stuff needed as well? */ ++ ++#elif defined(PLATFORM_INTERFACE) ++ dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n", ++ (unsigned)_dev->resource->start, ++ (unsigned)(_dev->resource->end - _dev->resource->start)); ++#endif ++ ++ ++ dwc_otg_device = dwc_alloc(sizeof(dwc_otg_device_t)); ++ ++ if (!dwc_otg_device) { ++ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ ++ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device)); ++ dwc_otg_device->reg_offset = 0xFFFFFFFF; ++ ++ /* ++ * Map the DWC_otg Core memory into virtual address space. ++ */ ++#ifdef LM_INTERFACE ++#if 1 ++ dwc_otg_device->base = ioremap(_dev->resource.start, SZ_256K); ++#else ++ struct map_desc desc = { ++ .virtual = IO_ADDRESS((unsigned)_dev->resource.start), ++ .pfn = __phys_to_pfn((unsigned)_dev->resource.start), ++ .length = SZ_128K, ++ .type = MT_DEVICE ++ }; ++ iotable_init(&desc, 1); ++ dwc_otg_device->base = (void *)desc.virtual; ++#endif ++ ++ if (!dwc_otg_device->base) { ++ dev_err(&_dev->dev, "ioremap() failed\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ dev_dbg(&_dev->dev, "base=0x%08x\n", (unsigned)dwc_otg_device->base); ++#elif defined(PCI_INTERFACE) ++ _dev->current_state = PCI_D0; ++ _dev->dev.power.power_state = PMSG_ON; ++ ++ if (!_dev->irq) { ++ DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!", pci_name(_dev)); ++ retval = -ENODEV; ++ goto fail; ++ } ++ ++ dwc_otg_device->rsrc_start = pci_resource_start(_dev,0); ++ dwc_otg_device->rsrc_len = pci_resource_len(_dev,0); ++ DWC_DEBUGPL(DBG_ANY,"PCI resource: start=%08x, len=%08x\n", ++ dwc_otg_device->rsrc_start, ++ dwc_otg_device->rsrc_len); ++ if (!request_mem_region(dwc_otg_device->rsrc_start, dwc_otg_device->rsrc_len, "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error mapping memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } ++ ++ dwc_otg_device->base = ioremap_nocache(dwc_otg_device->rsrc_start, dwc_otg_device->rsrc_len); ++ if (dwc_otg_device->base == NULL) { ++ dev_dbg(&_dev->dev, "error mapping memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } ++ dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n", dwc_otg_device->base); ++ dwc_otg_device->base = (char *)dwc_otg_device->base; ++ dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n", dwc_otg_device->base); ++ dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__, ++ (unsigned)dwc_otg_device->rsrc_start, dwc_otg_device->base); ++ // ++ pci_set_drvdata(_dev, dwc_otg_device); ++ pci_set_master(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n", ++ _dev->resource->start, ++ _dev->resource->end - _dev->resource->start + 1); ++#if 1 ++ if (!request_mem_region(_dev->resource->start, ++ _dev->resource->end - _dev->resource->start + 1, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } ++ ++ dwc_otg_device->base = ioremap_nocache(_dev->resource->start, ++ _dev->resource->end - ++ _dev->resource->start + 1); ++#else ++ { ++ struct map_desc desc = { ++ .virtual = IO_ADDRESS((unsigned)_dev->resource->start), ++ .pfn = __phys_to_pfn((unsigned)_dev->resource->start), ++ .length = SZ_128K, ++ .type = MT_DEVICE ++ }; ++ iotable_init(&desc, 1); ++ dwc_otg_device->base = (void *)desc.virtual; ++ } ++#endif ++ if (!dwc_otg_device->base) { ++ dev_err(&_dev->dev, "ioremap() failed\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ dev_dbg(&_dev->dev, "base=0x%08x\n", (unsigned)dwc_otg_device->base); ++#endif ++ ++ /* ++ * Initialize driver data to point to the global DWC_otg ++ * Device structure. ++ */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, dwc_otg_device); ++#endif ++ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device); ++ ++ dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->base); ++ DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n", ++ dwc_otg_device, dwc_otg_device->core_if);//GRAYG ++ ++ if (!dwc_otg_device->core_if) { ++ dev_err(&_dev->dev, "CIL initialization failed!\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ ++ dev_dbg(&_dev->dev, "Calling get_gsnpsid\n"); ++ /* ++ * Attempt to ensure this device is really a DWC_otg Controller. ++ * Read and verify the SNPSID register contents. The value should be ++ * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX". ++ */ ++ ++ if ((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != ++ 0x4F542000) { ++ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", ++ dwc_otg_get_gsnpsid(dwc_otg_device->core_if)); ++ dwc_otg_cil_remove(dwc_otg_device->core_if); ++ dwc_free(dwc_otg_device); ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Validate parameter values. ++ */ ++ dev_dbg(&_dev->dev, "Calling set_parameters\n"); ++ if (set_parameters(dwc_otg_device->core_if)) { ++ dwc_otg_cil_remove(dwc_otg_device->core_if); ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Create Device Attributes in sysfs ++ */ ++ dev_dbg(&_dev->dev, "Calling attr_create\n"); ++ dwc_otg_attr_create(_dev); ++ ++ /* ++ * Disable the global interrupt until all the interrupt ++ * handlers are installed. ++ */ ++ dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n"); ++ dwc_otg_disable_global_interrupts(dwc_otg_device->core_if); ++ ++ /* ++ * Install the interrupt handler for the common interrupts before ++ * enabling common interrupts in core_init below. ++ */ ++#if defined(PLATFORM_INTERFACE) ++ devirq = platform_get_irq(_dev, 0); ++#else ++ devirq = _dev->irq; ++#endif ++ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", ++ devirq); ++ dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq); ++ retval = request_irq(devirq, dwc_otg_common_irq, ++ IRQF_SHARED, ++ "dwc_otg", dwc_otg_device); ++ if (retval) { ++ DWC_ERROR("request of irq%d failed\n", devirq); ++ retval = -EBUSY; ++ goto fail; ++ } else { ++ dwc_otg_device->common_irq_installed = 1; ++ } ++ ++#ifndef IRQF_TRIGGER_LOW ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ dev_dbg(&_dev->dev, "Calling set_irq_type\n"); ++ set_irq_type(devirq, ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ IRQT_LOW ++#else ++ IRQ_TYPE_LEVEL_LOW ++#endif ++ ); ++#endif ++#endif /*IRQF_TRIGGER_LOW*/ ++ ++ /* ++ * Initialize the DWC_otg core. ++ */ ++ dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n"); ++ dwc_otg_core_init(dwc_otg_device->core_if); ++ ++#ifndef DWC_HOST_ONLY ++ /* ++ * Initialize the PCD ++ */ ++ dev_dbg(&_dev->dev, "Calling pcd_init\n"); ++ retval = pcd_init(_dev); ++ if (retval != 0) { ++ DWC_ERROR("pcd_init failed\n"); ++ dwc_otg_device->pcd = NULL; ++ goto fail; ++ } ++#endif ++#ifndef DWC_DEVICE_ONLY ++ /* ++ * Initialize the HCD ++ */ ++ dev_dbg(&_dev->dev, "Calling hcd_init\n"); ++ retval = hcd_init(_dev); ++ if (retval != 0) { ++ DWC_ERROR("hcd_init failed\n"); ++ dwc_otg_device->hcd = NULL; ++ goto fail; ++ } ++#endif ++ /* Recover from drvdata having been overwritten by hcd_init() */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PCI_INTERFACE) ++ pci_set_drvdata(_dev, dwc_otg_device); ++#endif ++ ++ /* ++ * Enable the global interrupt after all the interrupt ++ * handlers are installed. ++ */ ++ dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n"); ++ dwc_otg_enable_global_interrupts(dwc_otg_device->core_if); ++ dev_dbg(&_dev->dev, "Done\n"); ++ ++ return 0; ++ ++ fail: ++ dwc_otg_driver_remove(_dev); ++ return retval; ++} ++ ++/** ++ * This structure defines the methods to be called by a bus driver ++ * during the lifecycle of a device on that bus. Both drivers and ++ * devices are registered with a bus driver. The bus driver matches ++ * devices to drivers based on information in the device and driver ++ * structures. ++ * ++ * The probe function is called when the bus driver matches a device ++ * to this driver. The remove function is called when a device is ++ * unregistered with the bus driver. ++ */ ++#ifdef LM_INTERFACE ++static struct lm_driver dwc_otg_driver = { ++ .drv = { ++ .name = (char *)dwc_driver_name, ++ }, ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ // 'suspend' and 'resume' absent ++}; ++#elif defined(PCI_INTERFACE) ++static const struct pci_device_id pci_ids[] = { { ++ PCI_DEVICE(0x16c3, 0xabcd), ++ .driver_data = (unsigned long) 0xdeadbeef, ++ }, { /* end: all zeroes */ } ++}; ++MODULE_DEVICE_TABLE(pci, pci_ids); ++ ++/* pci driver glue; this is a "new style" PCI driver module */ ++static struct pci_driver dwc_otg_driver = { ++ .name = "dwc_otg", ++ .id_table = pci_ids, ++ ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ ++ .driver = { ++ .name = (char*)dwc_driver_name, ++ }, ++}; ++#elif defined(PLATFORM_INTERFACE) ++static struct platform_device_id platform_ids[] = { ++ { ++ .name = "bcm2708_usb", ++ .driver_data = (kernel_ulong_t) 0xdeadbeef, ++ }, ++ { /* end: all zeroes */ } ++}; ++MODULE_DEVICE_TABLE(platform, platform_ids); ++ ++static struct platform_driver dwc_otg_driver = { ++ .driver = { ++ .name = (char *)dwc_driver_name, ++ }, ++ .id_table = platform_ids, ++ ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early' ++}; ++#endif ++ ++ ++/** ++ * This function is called when the dwc_otg_driver is installed with the ++ * insmod command. It registers the dwc_otg_driver structure with the ++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function ++ * to be called. In addition, the bus driver will automatically expose ++ * attributes defined for the device and driver in the special sysfs file ++ * system. ++ * ++ * @return ++ */ ++static int __init dwc_otg_driver_init(void) ++{ ++ int retval = 0; ++ int error; ++ printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name, ++ DWC_DRIVER_VERSION, ++#ifdef LM_INTERFACE ++ "logicmodule"); ++ retval = lm_driver_register(&dwc_otg_driver); ++#elif defined(PCI_INTERFACE) ++ "pci"); ++ retval = pci_register_driver(&dwc_otg_driver); ++#elif defined(PLATFORM_INTERFACE) ++ "platform"); ++ retval = platform_driver_register(&dwc_otg_driver); ++#endif ++ if (retval < 0) { ++ printk(KERN_ERR "%s retval=%d\n", __func__, retval); ++ return retval; ++ } ++#ifdef LM_INTERFACE ++ error = driver_create_file(&dwc_otg_driver.drv, &driver_attr_version); ++ error = driver_create_file(&dwc_otg_driver.drv, &driver_attr_debuglevel); ++#elif defined(PCI_INTERFACE) ++ error = driver_create_file(&dwc_otg_driver.driver, ++ &driver_attr_version); ++ error = driver_create_file(&dwc_otg_driver.driver, ++ &driver_attr_debuglevel); ++#elif defined(PLATFORM_INTERFACE) ++ error = driver_create_file(&dwc_otg_driver.driver, ++ &driver_attr_version); ++ error = driver_create_file(&dwc_otg_driver.driver, ++ &driver_attr_debuglevel); ++#endif ++ return retval; ++} ++ ++module_init(dwc_otg_driver_init); ++ ++/** ++ * This function is called when the driver is removed from the kernel ++ * with the rmmod command. The driver unregisters itself with its bus ++ * driver. ++ * ++ */ ++static void __exit dwc_otg_driver_cleanup(void) ++{ ++ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); ++ ++#ifdef LM_INTERFACE ++ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version); ++ lm_driver_unregister(&dwc_otg_driver); ++#elif defined(PCI_INTERFACE) ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ pci_unregister_driver(&dwc_otg_driver); ++#elif defined(PLATFORM_INTERFACE) ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ platform_driver_unregister(&dwc_otg_driver); ++#endif ++ ++ printk(KERN_INFO "%s module removed\n", dwc_driver_name); ++} ++module_exit(dwc_otg_driver_cleanup); ++ ++MODULE_DESCRIPTION(DWC_DRIVER_DESC); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE("GPL"); ++ ++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); ++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); ++module_param_named(opt, dwc_otg_module_params.opt, int, 0444); ++MODULE_PARM_DESC(opt, "OPT Mode"); ++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); ++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); ++ ++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, ++ 0444); ++MODULE_PARM_DESC(dma_desc_enable, ++ "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); ++ ++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, ++ 0444); ++MODULE_PARM_DESC(dma_burst_size, ++ "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); ++module_param_named(speed, dwc_otg_module_params.speed, int, 0444); ++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); ++module_param_named(host_support_fs_ls_low_power, ++ dwc_otg_module_params.host_support_fs_ls_low_power, int, ++ 0444); ++MODULE_PARM_DESC(host_support_fs_ls_low_power, ++ "Support Low Power w/FS or LS 0=Support 1=Don't Support"); ++module_param_named(host_ls_low_power_phy_clk, ++ dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); ++MODULE_PARM_DESC(host_ls_low_power_phy_clk, ++ "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); ++module_param_named(enable_dynamic_fifo, ++ dwc_otg_module_params.enable_dynamic_fifo, int, 0444); ++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); ++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, ++ 0444); ++MODULE_PARM_DESC(data_fifo_size, ++ "Total number of words in the data FIFO memory 32-32768"); ++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, ++ int, 0444); ++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(dev_nperio_tx_fifo_size, ++ dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, ++ "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(dev_perio_tx_fifo_size_1, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_2, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_3, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_4, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_5, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_6, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_7, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_8, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_9, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_10, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_11, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_12, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_13, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_14, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_15, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, ++ int, 0444); ++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(host_nperio_tx_fifo_size, ++ dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_nperio_tx_fifo_size, ++ "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(host_perio_tx_fifo_size, ++ dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_perio_tx_fifo_size, ++ "Number of words in the host periodic Tx FIFO 16-32768"); ++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, ++ int, 0444); ++/** @todo Set the max to 512K, modify checks */ ++MODULE_PARM_DESC(max_transfer_size, ++ "The maximum transfer size supported in bytes 2047-65535"); ++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, ++ int, 0444); ++MODULE_PARM_DESC(max_packet_count, ++ "The maximum number of packets in a transfer 15-511"); ++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, ++ 0444); ++MODULE_PARM_DESC(host_channels, ++ "The number of host channel registers to use 1-16"); ++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, ++ 0444); ++MODULE_PARM_DESC(dev_endpoints, ++ "The number of endpoints in addition to EP0 available for device mode 1-15"); ++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); ++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); ++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, ++ 0444); ++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); ++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ddr, ++ "ULPI at double or single data rate 0=Single 1=Double"); ++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, ++ int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ext_vbus, ++ "ULPI PHY using internal or external vbus 0=Internal"); ++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); ++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); ++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); ++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); ++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); ++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); ++module_param_named(debug, g_dbg_lvl, int, 0444); ++MODULE_PARM_DESC(debug, ""); ++ ++module_param_named(en_multiple_tx_fifo, ++ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); ++MODULE_PARM_DESC(en_multiple_tx_fifo, ++ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); ++module_param_named(dev_tx_fifo_size_1, ++ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_2, ++ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_3, ++ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_4, ++ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_5, ++ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_6, ++ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_7, ++ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_8, ++ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_9, ++ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_10, ++ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_11, ++ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_12, ++ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_13, ++ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_14, ++ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_15, ++ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); ++ ++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); ++MODULE_PARM_DESC(thr_ctl, ++ "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); ++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, ++ 0444); ++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); ++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, ++ 0444); ++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); ++ ++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); ++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); ++module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444); ++MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled"); ++module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444); ++MODULE_PARM_DESC(ic_usb_cap, ++ "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled"); ++module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int, 0444); ++MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio"); ++ ++/** @page "Module Parameters" ++ * ++ * The following parameters may be specified when starting the module. ++ * These parameters define how the DWC_otg controller should be ++ * configured. Parameter values are passed to the CIL initialization ++ * function dwc_otg_cil_init ++ * ++ * Example: modprobe dwc_otg speed=1 otg_cap=1 ++ * ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++*/ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_driver.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_driver.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_driver.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_driver.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,101 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $ ++ * $Revision: #16 $ ++ * $Date: 2009/04/03 $ ++ * $Change: 1225160 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DRIVER_H__ ++#define __DWC_OTG_DRIVER_H__ ++ ++/** @file ++ * This file contains the interface to the Linux driver. ++ */ ++#include "dwc_otg_core_if.h" ++ ++/* Type declarations */ ++struct dwc_otg_pcd; ++struct dwc_otg_hcd; ++ ++#ifdef PCI_INTERFACE ++#include ++#endif ++ ++ ++ ++/** ++ * This structure is a wrapper that encapsulates the driver components used to ++ * manage a single DWC_otg controller. ++ */ ++typedef struct dwc_otg_device { ++ /** Base address returned from ioremap() */ ++ void *base; ++ ++#ifdef LM_INTERFACE ++ struct lm_device *lmdev; ++#elif defined(PCI_INTERFACE) ++ int rsrc_start; ++ int rsrc_len; ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platformdev; ++#endif ++ ++ /** Pointer to the core interface structure. */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Register offset for Diagnostic API. */ ++ uint32_t reg_offset; ++ ++ /** Pointer to the PCD structure. */ ++ struct dwc_otg_pcd *pcd; ++ ++ /** Pointer to the HCD structure. */ ++ struct dwc_otg_hcd *hcd; ++ ++ /** Flag to indicate whether the common IRQ handler is installed. */ ++ uint8_t common_irq_installed; ++ ++} dwc_otg_device_t; ++ ++/*We must clear S3C24XX_EINTPEND external interrupt register ++ * because after clearing in this register trigerred IRQ from ++ * H/W core in kernel interrupt can be occured again before OTG ++ * handlers clear all IRQ sources of Core registers because of ++ * timing latencies and Low Level IRQ Type. ++ */ ++#ifdef CONFIG_MACH_IPMATE ++#define S3C2410X_CLEAR_EINTPEND() \ ++do { \ ++ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ ++} while (0) ++#else ++#define S3C2410X_CLEAR_EINTPEND() do { } while (0) ++#endif ++ ++#endif +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,3334 @@ ++ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ ++ * $Revision: #87 $ ++ * $Date: 2009/04/23 $ ++ * $Change: 1239143 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** @file ++ * This file implements HCD Core. All code in this file is portable and don't ++ * use any OS specific functions. ++ * Interface provided by HCD Core is defined in ++ * header file. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++#ifdef HW2937_WORKAROUND ++//#include ++#include ++#endif ++ ++dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void) ++{ ++ return dwc_alloc(sizeof(dwc_otg_hcd_t)); ++} ++ ++/** ++ * Connection timeout function. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. ++ */ ++void dwc_otg_hcd_connect_timeout(void *ptr) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr); ++ DWC_PRINTF("Connect Timeout\n"); ++ __DWC_ERROR("Device Not Connected/Responding\n"); ++} ++ ++#ifdef DEBUG ++static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ if (qh->channel != NULL) { ++ dwc_hc_t *hc = qh->channel; ++ dwc_list_link_t *item; ++ dwc_otg_qh_t *qh_item; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ int i; ++ ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ ++ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ hcdma = dwc_read_reg32(&hc_regs->hcdma); ++ ++ DWC_PRINTF(" Assigned to channel %p:\n", hc); ++ DWC_PRINTF(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, ++ hcsplt.d32); ++ DWC_PRINTF(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, ++ hcdma); ++ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINTF(" qh: %p\n", hc->qh); ++ DWC_PRINTF(" NP inactive sched:\n"); ++ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) { ++ qh_item = ++ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINTF(" %p\n", qh_item); ++ } ++ DWC_PRINTF(" NP active sched:\n"); ++ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) { ++ qh_item = ++ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINTF(" %p\n", qh_item); ++ } ++ DWC_PRINTF(" Channels: \n"); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINTF(" %2d: %p\n", i, hc); ++ } ++ } ++} ++#endif /* DEBUG */ ++ ++/** ++ * Work queue function for starting the HCD when A-Cable is connected. ++ * The hcd_start() must be called in a process context. ++ */ ++static void hcd_start_func(void *_vp) ++{ ++ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd); ++ if (hcd) { ++ hcd->fops->start(hcd); ++ } ++} ++ ++static void del_xfer_timers(dwc_otg_hcd_t * hcd) ++{ ++#ifdef DEBUG ++ int i; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++} ++ ++static void del_timers(dwc_otg_hcd_t * hcd) ++{ ++ del_xfer_timers(hcd); ++ DWC_TIMER_CANCEL(hcd->conn_timer); ++} ++ ++/** ++ * Processes all the URBs in a single list of QHs. Completes them with ++ * -ETIMEDOUT and frees the QTD. ++ */ ++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) ++{ ++ dwc_list_link_t *qh_item; ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ ++ DWC_LIST_FOREACH(qh_item, qh_list) { ++ qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry); ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, ++ &qh->qtd_list, qtd_list_entry) { ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ if (qtd->urb != NULL) { ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, ++ -DWC_E_TIMEOUT); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ } ++ ++ } ++ } ++} ++ ++/** ++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic ++ * and periodic schedules. The QTD associated with each URB is removed from ++ * the schedule and freed. This function may be called when a disconnect is ++ * detected or when the HCD is being stopped. ++ */ ++static void kill_all_urbs(dwc_otg_hcd_t * hcd) ++{ ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); ++} ++ ++/** ++ * Start the connection timer. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. The ++ * timer is deleted if a port connect interrupt occurs before the ++ * timer expires. ++ */ ++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd) ++{ ++ DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ ); ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_session_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd = p; ++ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); ++ return 1; ++} ++ ++/** ++ * HCD Callback function for starting the HCD when A-Cable is ++ * connected. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ dwc_otg_core_if_t *core_if; ++ hprt0_data_t hprt0; ++ ++ core_if = dwc_otg_hcd->core_if; ++ ++ if (core_if->op_state == B_HOST) { ++ /* ++ * Reset the port. During a HNP mode switch the reset ++ * needs to occur within 1ms and have a duration of at ++ * least 50ms. ++ */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg, ++ hcd_start_func, dwc_otg_hcd, 50, ++ "start hcd"); ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_disconnect_cb(void *p) ++{ ++ gintsts_data_t intr; ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ ++ /* ++ * Set status flags for the hub driver. ++ */ ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 0; ++ ++ /* ++ * Shutdown any transfers in process by clearing the Tx FIFO Empty ++ * interrupt mask and status bits and disabling subsequent host ++ * channel interrupts. ++ */ ++ intr.d32 = 0; ++ intr.b.nptxfempty = 1; ++ intr.b.ptxfempty = 1; ++ intr.b.hcintr = 1; ++ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, ++ intr.d32, 0); ++ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, ++ intr.d32, 0); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* ++ * Turn off the vbus power only if the core has transitioned to device ++ * mode. If still in host mode, need to keep power on to detect a ++ * reconnection. ++ */ ++ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { ++ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ DWC_PRINTF("Disconnect: PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, ++ hprt0.d32); ++ } ++ ++ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); ++ } ++ ++ /* Respond with an error status to all URBs in the schedule. */ ++ kill_all_urbs(dwc_otg_hcd); ++ ++ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { ++ /* Clean up any host channels that were in use. */ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ ++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels; ++ ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ /* Flush out any channel requests in slave mode. */ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (DWC_CIRCLEQ_EMPTY_ENTRY ++ (channel, hc_list_entry)) { ++ hc_regs = ++ dwc_otg_hcd->core_if->host_if-> ++ hc_regs[i]; ++ hcchar.d32 = ++ dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ dwc_write_reg32(&hc_regs-> ++ hcchar, ++ hcchar.d32); ++ } ++ } ++ } ++ } ++ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) { ++ hc_regs = ++ dwc_otg_hcd->core_if->host_if->hc_regs[i]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ /* Halt the channel. */ ++ hcchar.b.chdis = 1; ++ dwc_write_reg32(&hc_regs->hcchar, ++ hcchar.d32); ++ } ++ ++ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, ++ channel); ++ DWC_CIRCLEQ_INSERT_TAIL(&dwc_otg_hcd-> ++ free_hc_list, channel, ++ hc_list_entry); ++ /* ++ * Added for Descriptor DMA to prevent channel double cleanup ++ * in release_channel_ddma(). Which called from ep_disable ++ * when device disconnect. ++ */ ++ channel->qh = NULL; ++ } ++ } ++ } ++ ++ if (dwc_otg_hcd->fops->disconnect) { ++ dwc_otg_hcd->fops->disconnect(dwc_otg_hcd); ++ } ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for stopping the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_stop_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd_stop(dwc_otg_hcd); ++ return 1; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * HCD Callback function for sleep of HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int dwc_otg_hcd_sleep_cb(void *p) ++{ ++ dwc_otg_hcd_t *hcd = p; ++ ++ dwc_otg_hcd_free_hc_from_lpm(hcd); ++ ++ return 0; ++} ++#endif ++ ++/** ++ * HCD Callback function for Remote Wakeup. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int dwc_otg_hcd_rem_wakeup_cb(void *p) ++{ ++ dwc_otg_hcd_t *hcd = p; ++ ++ if (hcd->core_if->lx_state == DWC_OTG_L2) { ++ hcd->flags.b.port_suspend_change = 1; ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ else { ++ hcd->flags.b.port_l1_change = 1; ++ } ++#endif ++ return 0; ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd) ++{ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); ++ ++ /* ++ * The root hub should be disconnected before this function is called. ++ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) ++ * and the QH lists (via ..._hcd_endpoint_disable). ++ */ ++ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(hcd->core_if); ++ ++ /* Turn off the vbus power */ ++ DWC_PRINTF("PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ dwc_write_reg32(hcd->core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(1); ++} ++ ++int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle) ++{ ++ uint64_t flags; ++ int retval = 0; ++ dwc_otg_qtd_t *qtd; ++ ++ if (NULL == hcd->core_if) { //GRAYG ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n"); ++ /* No longer connected. */ ++ return -DWC_E_INVALID; ++ } ++ ++ if (!hcd->flags.b.port_connect_status) { ++ /* No longer connected. */ ++ return -DWC_E_NO_DEVICE; ++ } ++ ++ qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb); ++ if (qtd == NULL) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (qtd->urb == NULL) { //GRAYG ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (qtd->urb->priv == NULL) { //GRAYG ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ retval = ++ dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle); ++ // creates a new queue in ep_handle if it doesn't exist already ++ if (retval < 0) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " ++ "Error status %d\n", retval); ++ dwc_otg_hcd_qtd_free(qtd); ++ } else { ++ qtd->qh = *ep_handle; ++ } ++ ++ if (hcd->core_if->dma_desc_enable && retval == 0) { ++ dwc_otg_transaction_type_e tr_type; ++ if ((qtd->qh->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP)) { ++ /* Do not schedule SG transcations until qtd has URB_GIVEBACK_ASAP set */ ++ return 0; ++ } ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ } ++ ++ return retval; ++} ++ ++int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ uint64_t flags; ++ ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *urb_qtd; ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ if (hcd == NULL) { //GRAYG ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n"); ++ return -DWC_E_INVALID; ++ } ++ if (dwc_otg_urb == NULL) { //GRAYG ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n"); ++ return -DWC_E_INVALID; ++ } ++ if (dwc_otg_urb->qtd == NULL) { //GRAYG ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n"); ++ return -DWC_E_INVALID; ++ } ++ urb_qtd = dwc_otg_urb->qtd; ++ if (urb_qtd->qh == NULL) { //GRAYG ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n"); ++ return -DWC_E_INVALID; ++ } ++ qh = urb_qtd->qh; ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ if (urb_qtd->in_process) { ++ dump_channel_info(hcd, qh); ++ } ++ } ++#endif ++ if (hcd->core_if == NULL) { //GRAYG ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n"); ++ return -DWC_E_INVALID; ++ } ++ if (urb_qtd->in_process && qh->channel) { ++ /* The QTD is in process (it has been assigned to a channel). */ ++ if (hcd->flags.b.port_connect_status) { ++ /* ++ * If still connected (i.e. in host mode), halt the ++ * channel so it can be used for other transfers. If ++ * no longer connected, the host registers can't be ++ * written to halt the channel since the core is in ++ * device mode. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, qh->channel, ++ DWC_OTG_HC_XFER_URB_DEQUEUE); ++ } ++ } ++ ++ /* ++ * Free the QTD and clean up the associated QH. Leave the QH in the ++ * schedule if it has any remaining QTDs. ++ */ ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - " ++ "delete %sQueue handler\n", ++ hcd->core_if->dma_desc_enable?"DMA ":""); //GRAYG ++ if (!hcd->core_if->dma_desc_enable) { ++ uint8_t b = urb_qtd->in_process; ++ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); ++ if (b) { ++ dwc_otg_hcd_qh_deactivate(hcd, qh, 0); ++ qh->channel = NULL; ++ } else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } ++ } ++ else { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ ++ return 0; ++} ++ ++int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, ++ int retry) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ int retval = 0; ++ uint64_t flags; ++ ++ if (retry < 0) { ++ retval = -DWC_E_INVALID; ++ goto done; ++ } ++ ++ if (!qh) { ++ goto done; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) { ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ retry--; ++ dwc_msleep(5); ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ } ++ ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ /* ++ * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove ++ * and qh_free to prevent stack dump on dwc_dma_free() with ++ * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free() ++ * and dwc_otg_hcd_frame_list_alloc(). ++ */ ++ dwc_otg_hcd_qh_free(hcd, qh); ++ ++ done: ++ return retval; ++} ++ ++/** ++ * HCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { ++ .start = dwc_otg_hcd_start_cb, ++ .stop = dwc_otg_hcd_stop_cb, ++ .disconnect = dwc_otg_hcd_disconnect_cb, ++ .session_start = dwc_otg_hcd_session_start_cb, ++ .resume_wakeup = dwc_otg_hcd_rem_wakeup_cb, ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ .sleep = dwc_otg_hcd_sleep_cb, ++#endif ++ .p = 0, ++}; ++ ++/** ++ * Reset tasklet function ++ */ ++static void reset_tasklet_func(void *data) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data; ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ hprt0_data_t hprt0; ++ ++ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(60); ++ ++ hprt0.b.prtrst = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++} ++ ++static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) ++{ ++ dwc_list_link_t *item; ++ dwc_otg_qh_t *qh; ++ ++ if (!qh_list->next) { ++ /* The list hasn't been initialized yet. */ ++ return; ++ } ++ ++ /* Ensure there are no QTDs or URBs left. */ ++ kill_urbs_in_qh_list(hcd, qh_list); ++ ++ DWC_LIST_FOREACH(item, qh_list) { ++ qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ dwc_otg_hcd_qh_remove_and_free(hcd, qh); ++ } ++} ++ ++/** ++ * Frees secondary storage associated with the dwc_otg_hcd structure contained ++ * in the struct usb_hcd field. ++ */ ++static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int i; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* Free memory for QH/QTD lists */ ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); ++ ++ /* Free memory for the host channels. */ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; ++ ++#ifdef DEBUG ++ if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) { ++ DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++ if (hc != NULL) { ++ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", ++ i, hc); ++ dwc_free(hc); ++ } ++ } ++ ++ if (dwc_otg_hcd->core_if->dma_enable) { ++ if (dwc_otg_hcd->status_buf_dma) { ++ dwc_dma_free(DWC_OTG_HCD_STATUS_BUF_SIZE, ++ dwc_otg_hcd->status_buf, ++ dwc_otg_hcd->status_buf_dma); ++ } ++ } else if (dwc_otg_hcd->status_buf != NULL) { ++ dwc_free(dwc_otg_hcd->status_buf); ++ } ++ DWC_SPINLOCK_FREE(dwc_otg_hcd->lock); ++ DWC_TIMER_FREE(dwc_otg_hcd->conn_timer); ++ DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet); ++ dwc_free(dwc_otg_hcd); ++} ++ ++int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ ++ hcd->lock = DWC_SPINLOCK_ALLOC(); ++ ++ DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n", ++ hcd, core_if);//GRAYG ++ ++ hcd->core_if = core_if; ++ /* Register the HCD CIL Callbacks */ ++ dwc_otg_cil_register_hcd_callbacks(hcd->core_if, ++ &hcd_cil_callbacks, hcd); ++ ++ /* Initialize the non-periodic schedule. */ ++ DWC_LIST_INIT(&hcd->non_periodic_sched_inactive); ++ DWC_LIST_INIT(&hcd->non_periodic_sched_active); ++ ++ /* Initialize the periodic schedule. */ ++ DWC_LIST_INIT(&hcd->periodic_sched_inactive); ++ DWC_LIST_INIT(&hcd->periodic_sched_ready); ++ DWC_LIST_INIT(&hcd->periodic_sched_assigned); ++ DWC_LIST_INIT(&hcd->periodic_sched_queued); ++ ++ /* ++ * Create a host channel descriptor for each host channel implemented ++ * in the controller. Initialize the channel descriptor array. ++ */ ++ DWC_CIRCLEQ_INIT(&hcd->free_hc_list); ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array)); ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_alloc(sizeof(dwc_hc_t)); ++ if (channel == NULL) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: host channel allocation failed\n", ++ __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ channel->hc_num = i; ++ hcd->hc_ptr_array[i] = channel; ++#ifdef DEBUG ++ hcd->core_if->hc_xfer_timer[i] = ++ DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout, ++ &hcd->core_if->hc_xfer_info[i]); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, ++ channel); ++ } ++ ++ /* Initialize the Connection timeout timer. */ ++ hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer", ++ dwc_otg_hcd_connect_timeout, 0); ++ ++ /* Initialize reset tasklet. */ ++ hcd->reset_tasklet = DWC_TASK_ALLOC(reset_tasklet_func, hcd); ++ ++ /* ++ * Allocate space for storing data on status transactions. Normally no ++ * data is sent, but this space acts as a bit bucket. This must be ++ * done after usb_add_hcd since that function allocates the DMA buffer ++ * pool. ++ */ ++ if (hcd->core_if->dma_enable) { ++ hcd->status_buf = ++ dwc_dma_alloc(DWC_OTG_HCD_STATUS_BUF_SIZE, ++ &hcd->status_buf_dma); ++ } else { ++ hcd->status_buf = dwc_alloc(DWC_OTG_HCD_STATUS_BUF_SIZE); ++ } ++ if (!hcd->status_buf) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: status_buf allocation failed\n", __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ ++ hcd->otg_port = 1; ++ hcd->frame_list = NULL; ++ hcd->frame_list_dma = 0; ++ ++#ifdef HW2937_WORKAROUND ++ hcd->hw2937_xfer_mode = HW2937_XFER_MODE_IDLE; ++ hcd->hw2937_assigned_channels = 0; ++#endif ++ ++out: ++ return retval; ++} ++ ++void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd) ++{ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(hcd->core_if); ++ ++ dwc_otg_hcd_free(hcd); ++} ++ ++/** ++ * Initializes dynamic portions of the DWC_otg HCD state. ++ */ ++static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd) ++{ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_hc_t *channel_tmp; ++ ++ hcd->flags.d32 = 0; ++ ++ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; ++ hcd->non_periodic_channels = 0; ++ hcd->periodic_channels = 0; ++ ++ /* ++ * Put all channels in the free channel list and clean up channel ++ * states. ++ */ ++ DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp, ++ &hcd->free_hc_list, hc_list_entry) { ++ DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry); ++ } ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ channel = hcd->hc_ptr_array[i]; ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel, ++ hc_list_entry); ++ dwc_otg_hc_cleanup(hcd->core_if, channel); ++ } ++ ++ /* Initialize the DWC core for host mode operation. */ ++ dwc_otg_core_host_init(hcd->core_if); ++} ++ ++/** ++ * Assigns transactions from a QTD to a free host channel and initializes the ++ * host channel to perform the transactions. The host channel is removed from ++ * the free list. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh Transactions from the first QTD for this QH are selected and ++ * assigned to a free host channel. ++ */ ++#ifdef HW2937_WORKAROUND ++static int assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++#else ++static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++#endif ++{ ++ dwc_hc_t *hc; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ void* ptr = NULL; ++#ifdef HW2937_WORKAROUND ++ int ep_is_in; ++#endif ++ ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length); ++ ++#ifdef HW2937_WORKAROUND ++ ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0); ++ if (ep_is_in && ((hcd->hw2937_xfer_mode == HW2937_XFER_MODE_OUT) || ++ (hcd->hw2937_xfer_mode == HW2937_XFER_MODE_PAUSEIN))) ++ return 0; ++#endif ++ ++ if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info)) ++ urb->actual_length = urb->length; ++ ++ ++ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); ++ ++ /* Remove the host channel from the free list. */ ++ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); ++ qh->channel = hc; ++ ++ qtd->in_process = 1; ++ ++ /* ++ * Use usb_pipedevice to determine device address. This address is ++ * 0 before the SET_ADDRESS command and the correct address afterward. ++ */ ++ hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info); ++ hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info); ++ hc->speed = qh->dev_speed; ++ hc->max_packet = dwc_max_packet(qh->maxp); ++ ++ hc->xfer_started = 0; ++ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; ++ hc->error_state = (qtd->error_count > 0); ++ hc->halt_on_queue = 0; ++ hc->halt_pending = 0; ++ hc->requests = 0; ++ ++ /* ++ * The following values may be modified in the transfer type section ++ * below. The xfer_len value may be reduced when the transfer is ++ * started to accommodate the max widths of the XferSize and PktCnt ++ * fields in the HCTSIZn register. ++ */ ++ hc->do_ping = qh->ping_state; ++#ifdef HW2937_WORKAROUND ++ hc->ep_is_in = ep_is_in; ++#else ++ hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0); ++#endif ++ hc->data_pid_start = qh->data_toggle; ++ hc->multi_count = 1; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length; ++ ++ /* For non-dword aligned case */ ++ if (((uint32_t)hc->xfer_buff & 0x3) && !hcd->core_if->dma_desc_enable) { ++ ptr = (uint8_t *) urb->buf + urb->actual_length; ++ } ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length; ++ } ++ hc->xfer_len = urb->length - urb->actual_length; ++ hc->xfer_count = 0; ++ ++ /* ++ * Set the split attributes ++ */ ++ hc->do_split = 0; ++ if (qh->do_split) { ++ uint32_t hub_addr, port_addr; ++ hc->do_split = 1; ++ hc->xact_pos = qtd->isoc_split_pos; ++ hc->complete_split = qtd->complete_split; ++ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr); ++ hc->hub_addr = (uint8_t) hub_addr; ++ hc->port_addr = (uint8_t) port_addr; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { ++ case UE_CONTROL: ++ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); ++ hc->do_ping = 0; ++ hc->ep_is_in = 0; ++ hc->data_pid_start = DWC_OTG_HC_PID_SETUP; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->setup_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->setup_packet; ++ } ++ hc->xfer_len = 8; ++ ptr = NULL; ++ break; ++ case DWC_OTG_CONTROL_DATA: ++ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); ++ hc->data_pid_start = qtd->data_toggle; ++ break; ++ case DWC_OTG_CONTROL_STATUS: ++ /* ++ * Direction is opposite of data direction or IN if no ++ * data. ++ */ ++ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); ++ if (urb->length == 0) { ++ hc->ep_is_in = 1; ++ } else { ++ hc->ep_is_in = ++ dwc_otg_hcd_is_pipe_out(&urb->pipe_info); ++ } ++ if (hc->ep_is_in) { ++ hc->do_ping = 0; ++ } ++ ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ ++ hc->xfer_len = 0; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) hcd->status_buf_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) hcd->status_buf; ++ } ++ ptr = NULL; ++ break; ++ } ++ break; ++ case UE_BULK: ++ hc->ep_type = DWC_OTG_EP_TYPE_BULK; ++ break; ++ case UE_INTERRUPT: ++ hc->ep_type = DWC_OTG_EP_TYPE_INTR; ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ hc->ep_type = DWC_OTG_EP_TYPE_ISOC; ++ ++ if (hcd->core_if->dma_desc_enable) ++ break; ++ ++ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; ++ ++ frame_desc->status = 0; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->buf; ++ } ++ hc->xfer_buff += ++ frame_desc->offset + qtd->isoc_split_offset; ++ hc->xfer_len = ++ frame_desc->length - qtd->isoc_split_offset; ++ ++ /* For non-dword aligned buffers */ ++ if (((uint32_t)hc->xfer_buff & 0x3) && hcd->core_if->dma_enable) { ++ ptr = (uint8_t *) urb->buf + frame_desc->offset + qtd->isoc_split_offset; ++ } ++ else ++ ptr = NULL; ++ ++ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ if (hc->xfer_len <= 188) { ++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ } else { ++ hc->xact_pos = ++ DWC_HCSPLIT_XACTPOS_BEGIN; ++ } ++ } ++ } ++ break; ++ } ++ /* non DWORD-aligned buffer case */ ++ if (ptr) { ++ uint32_t buf_size; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ buf_size = hcd->core_if->core_params->max_transfer_size; ++ } else { ++ buf_size = 4096; ++ } ++ if (!qh->dw_align_buf) { ++ qh->dw_align_buf = ++ dwc_dma_alloc_atomic(buf_size, ++ &qh->dw_align_buf_dma); ++ if (!qh->dw_align_buf) { ++ DWC_ERROR("%s: Failed to allocate memory to handle " ++ "non-dword aligned buffer case\n", __func__); ++#ifdef HW2937_WORKAROUND ++ return 0; ++#else ++ return; ++#endif ++ } ++ } ++ if (!hc->ep_is_in) { ++ dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len); ++ } ++ hc->align_buff = qh->dw_align_buf_dma; ++ } ++ else { ++ hc->align_buff = 0; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This value may be modified when the transfer is started to ++ * reflect the actual transfer length. ++ */ ++ hc->multi_count = dwc_hb_mult(qh->maxp); ++ } ++ ++ if (hcd->core_if->dma_desc_enable) ++ hc->desc_list_addr = qh->desc_list_dma; ++ ++ dwc_otg_hc_init(hcd->core_if, hc); ++ hc->qh = qh; ++#ifdef HW2937_WORKAROUND ++ hcd->hw2937_assigned_channels |= (1 << hc->hc_num); ++ DWC_DEBUGPL(DBG_HW2937, " assign %d -> hw2937_ac %x\n", hc->hc_num, hcd->hw2937_assigned_channels); ++ return 1; ++#endif ++} ++ ++#ifdef HW2937_WORKAROUND ++ ++void debug_halt(void) ++{ ++ spinlock_t mr_lock = SPIN_LOCK_UNLOCKED; ++ unsigned long flags; ++ extern void v6_flush_kern_cache_all(void); ++ ++ spin_lock_irqsave(&mr_lock, flags); ++#ifdef CONFIG_MACH_BCM2708 ++ v6_flush_kern_cache_all(); ++#endif ++ while (1) continue; ++} ++ ++static ++void dwc_otg_hcd_disable_in_channels(dwc_otg_hcd_t * hcd) ++{ ++ int num_channels = hcd->core_if->core_params->host_channels; ++ static int stall_count = 0; ++ static int max_stall_count = 1; ++ static int last_stalled = 0; ++ int stalled = 0; ++ int i; ++ ++ DWC_DEBUGPL(DBG_HW2937, " Disable In Channels(%x)\n", hcd->hw2937_assigned_channels); ++ ++ for (i = 0; i < num_channels; i++) { ++ if (hcd->hw2937_assigned_channels & (1 << i)) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ if (!hc->halt_pending) { ++ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HW2937, "pktcnt %d, xfersize %x, xfer_len %x\n", hctsiz.b.pktcnt, hctsiz.b.xfersize, hc->xfer_len); ++ if (hctsiz.b.pktcnt == hc->start_pkt_count) ++ { ++ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_PAUSE_IN); ++ } ++ else ++ { ++ /* Unless a receive is in progress */ ++ stalled |= (1< max_stall_count) ++ { ++ max_stall_count = stall_count; ++ DWC_PRINTF( "stall (%x) count -> %d\n", stalled, stall_count); ++ if (stall_count == 10) ++ { ++ debug_halt(); ++ } ++ } ++ } ++ else ++ { ++ stall_count = 0; ++ last_stalled = stalled; ++ } ++} ++ ++static ++int dwc_otg_hcd_update_transaction_mode(dwc_otg_hcd_t * hcd) ++{ ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ int found_in = 0; ++ ++ /* If there are any existing out transactions, stay in OUT mode */ ++ if (hcd->hw2937_xfer_mode == HW2937_XFER_MODE_OUT) ++ { ++ return 1; ++ } ++ ++ /* Scan entries in the periodic ready list. */ ++ qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready); ++ ++ while (qh_ptr != &hcd->periodic_sched_ready) { ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ urb = qtd->urb; ++ if (!dwc_otg_hcd_is_pipe_in(&urb->pipe_info)) { ++ /* Switch to OUT mode */ ++ switch (hcd->hw2937_xfer_mode) ++ { ++ case HW2937_XFER_MODE_IDLE: ++ DWC_DEBUGPL(DBG_HW2937, "utm -> OUT\n"); ++ hcd->hw2937_xfer_mode = HW2937_XFER_MODE_OUT; ++ /* Drop through... */ ++ case HW2937_XFER_MODE_OUT: ++ return 1; ++ case HW2937_XFER_MODE_IN: ++ DWC_DEBUGPL(DBG_HW2937, "utm - halting %x INs\n", hcd->hw2937_assigned_channels); ++ /* Disable the channels with outstanding INs */ ++ dwc_otg_hcd_disable_in_channels(hcd); ++ ++ DWC_DEBUGPL(DBG_HW2937, "utm -> PAUSEIN\n"); ++ hcd->hw2937_xfer_mode = HW2937_XFER_MODE_PAUSEIN; ++ /* Drop through... */ ++ case HW2937_XFER_MODE_PAUSEIN: ++ /* Delay until the halt completes */ ++ return 0; ++ } ++ } ++ found_in = 1; ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ } ++ ++ /* ++ * Scan entries in the inactive portion of the non-periodic ++ * schedule. ++ */ ++ qh_ptr = hcd->non_periodic_sched_inactive.next; ++ while (qh_ptr != &hcd->non_periodic_sched_inactive) { ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ urb = qtd->urb; ++ if (!dwc_otg_hcd_is_pipe_in(&urb->pipe_info)) { ++ /* Switch to OUT mode */ ++ switch (hcd->hw2937_xfer_mode) ++ { ++ case HW2937_XFER_MODE_IDLE: ++ DWC_DEBUGPL(DBG_HW2937, "utm -> OUT\n"); ++ hcd->hw2937_xfer_mode = HW2937_XFER_MODE_OUT; ++ /* Drop through... */ ++ case HW2937_XFER_MODE_OUT: ++ return 1; ++ case HW2937_XFER_MODE_IN: ++ DWC_DEBUGPL(DBG_HW2937, "utm - halting %x INs\n", hcd->hw2937_assigned_channels); ++ /* Disable the channels with outstanding INs */ ++ dwc_otg_hcd_disable_in_channels(hcd); ++ ++ DWC_DEBUGPL(DBG_HW2937, "utm -> PAUSEIN\n"); ++ hcd->hw2937_xfer_mode = HW2937_XFER_MODE_PAUSEIN; ++ /* Drop through... */ ++ case HW2937_XFER_MODE_PAUSEIN: ++ /* Delay until the halt completes */ ++ return 0; ++ } ++ } ++ found_in = 1; ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ } ++ ++ if (found_in && (hcd->hw2937_xfer_mode == HW2937_XFER_MODE_IDLE)) ++ { ++ DWC_DEBUGPL(DBG_HW2937, "utm -> IN\n"); ++ hcd->hw2937_xfer_mode = HW2937_XFER_MODE_IN; ++ } ++ return 1; ++} ++ ++#endif /* HW2937_WORKAROUND */ ++ ++/** ++ * This function selects transactions from the HCD transfer schedule and ++ * assigns them to available host channels. It is called from HCD interrupt ++ * handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * ++ * @return The types of new transactions that were assigned to host channels. ++ */ ++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd) ++{ ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int num_channels; ++ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); ++#endif ++ ++#ifdef HW2937_WORKAROUND ++ if (!dwc_otg_hcd_update_transaction_mode(hcd)) ++ { ++ return ret_val; ++ } ++#endif ++ ++ /* Process entries in the periodic ready list. */ ++ qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready); ++ ++ while (qh_ptr != &hcd->periodic_sched_ready && ++ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++#ifdef HW2937_WORKAROUND ++ if (assign_and_init_hc(hcd, qh)) { ++#else ++ assign_and_init_hc(hcd, qh); ++#endif ++ ++ /* ++ * Move the QH from the periodic ready schedule to the ++ * periodic assigned schedule. ++ */ ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &qh->qh_list_entry); ++ ++ ret_val = DWC_OTG_TRANSACTION_PERIODIC; ++#ifdef HW2937_WORKAROUND ++ } else { ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ } ++#endif ++ } ++ ++ /* ++ * Process entries in the inactive portion of the non-periodic ++ * schedule. Some free host channels may not be used if they are ++ * reserved for periodic transfers. ++ */ ++ qh_ptr = hcd->non_periodic_sched_inactive.next; ++ num_channels = hcd->core_if->core_params->host_channels; ++ while (qh_ptr != &hcd->non_periodic_sched_inactive && ++ (hcd->non_periodic_channels < ++ num_channels - hcd->periodic_channels) && ++ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++#ifdef HW2937_WORKAROUND ++ if (assign_and_init_hc(hcd, qh)) { ++#else ++ assign_and_init_hc(hcd, qh); ++#endif ++ ++ /* ++ * Move the QH from the non-periodic inactive schedule to the ++ * non-periodic active schedule. ++ */ ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active, ++ &qh->qh_list_entry); ++ ++ if (ret_val == DWC_OTG_TRANSACTION_NONE) { ++ ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; ++ } else { ++ ret_val = DWC_OTG_TRANSACTION_ALL; ++ } ++ ++ hcd->non_periodic_channels++; ++#ifdef HW2937_WORKAROUND ++ } else { ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ } ++#endif ++ } ++ ++ return ret_val; ++} ++/** ++ * Attempts to queue a single transaction request for a host channel ++ * associated with either a periodic or non-periodic transfer. This function ++ * assumes that there is space available in the appropriate request queue. For ++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space ++ * is available in the appropriate Tx FIFO. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc Host channel descriptor associated with either a periodic or ++ * non-periodic transfer. ++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx ++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic ++ * transfers. ++ * ++ * @return 1 if a request is queued and more requests may be needed to ++ * complete the transfer, 0 if no more requests are required for this ++ * transfer, -1 if there is insufficient space in the Tx FIFO. ++ */ ++static int queue_transaction(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, uint16_t fifo_dwords_avail) ++{ ++ int retval; ++ ++ if (hcd->core_if->dma_enable) { ++ if (hcd->core_if->dma_desc_enable) { ++ if (!hc->xfer_started || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) { ++ dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh); ++ hc->qh->ping_state = 0; ++ } ++ } ++ else if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ hc->qh->ping_state = 0; ++ } ++ retval = 0; ++ } else if (hc->halt_pending) { ++ /* Don't queue a request if the channel has been halted. */ ++ retval = 0; ++ } else if (hc->halt_on_queue) { ++ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); ++ retval = 0; ++ } else if (hc->do_ping) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ } ++ retval = 0; ++ } else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ if ((fifo_dwords_avail * 4) >= hc->max_packet) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = ++ dwc_otg_hc_continue_transfer(hcd->core_if, ++ hc); ++ } ++ } else { ++ retval = -1; ++ } ++ } else { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); ++ } ++ } ++ ++ return retval; ++} ++ ++/** ++ * Processes periodic channels for the next frame and queues transactions for ++ * these channels to the DWC_otg controller. After queueing transactions, the ++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions ++ * to queue as Periodic Tx FIFO or request queue space becomes available. ++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. ++ */ ++static void process_periodic_channels(dwc_otg_hcd_t * hcd) ++{ ++ hptxsts_data_t tx_status; ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ ++ dwc_otg_host_global_regs_t *host_regs; ++ host_regs = hcd->core_if->host_if->host_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ ++ qh_ptr = hcd->periodic_sched_assigned.next; ++ while (qh_ptr != &hcd->periodic_sched_assigned) { ++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); ++ if (tx_status.b.ptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++ /* ++ * Set a flag if we're queuing high-bandwidth in slave mode. ++ * The flag prevents any halts to get into the request queue in ++ * the middle of multiple high-bandwidth packets getting queued. ++ */ ++ if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) { ++ hcd->core_if->queuing_high_bandwidth = 1; ++ } ++ status = ++ queue_transaction(hcd, qh->channel, ++ tx_status.b.ptxfspcavail); ++ if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ ++ /* ++ * In Slave mode, stay on the current transfer until there is ++ * nothing more to do or the high-bandwidth request count is ++ * reached. In DMA mode, only need to queue one request. The ++ * controller automatically handles multiple packets for ++ * high-bandwidth transfers. ++ */ ++ if (hcd->core_if->dma_enable || status == 0 || ++ qh->channel->requests == qh->channel->multi_count) { ++ qh_ptr = qh_ptr->next; ++ /* ++ * Move the QH from the periodic assigned schedule to ++ * the periodic queued schedule. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued, ++ &qh->qh_list_entry); ++ ++ /* done queuing high bandwidth */ ++ hcd->core_if->queuing_high_bandwidth = 0; ++ } ++ } ++ ++ if (!hcd->core_if->dma_enable) { ++ dwc_otg_core_global_regs_t *global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ global_regs = hcd->core_if->core_global_regs; ++ intr_mask.b.ptxfempty = 1; ++#ifdef DEBUG ++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) || ++ no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the periodic Tx ++ * FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ dwc_modify_reg32(&global_regs->gintmsk, 0, ++ intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, ++ 0); ++ } ++ } ++} ++ ++/** ++ * Processes active non-periodic channels and queues transactions for these ++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx ++ * FIFO Empty interrupt is enabled if there are more transactions to queue as ++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx ++ * FIFO Empty interrupt is disabled. ++ */ ++static void process_non_periodic_channels(dwc_otg_hcd_t * hcd) ++{ ++ gnptxsts_data_t tx_status; ++ dwc_list_link_t *orig_qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ int more_to_do = 0; ++ ++ dwc_otg_core_global_regs_t *global_regs = ++ hcd->core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ /* ++ * Keep track of the starting point. Skip over the start-of-list ++ * entry. ++ */ ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ } ++ orig_qh_ptr = hcd->non_periodic_qh_ptr; ++ ++ /* ++ * Process once through the active list or until no more space is ++ * available in the request queue or the Tx FIFO. ++ */ ++ do { ++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, ++ qh_list_entry); ++ status = ++ queue_transaction(hcd, qh->channel, ++ tx_status.b.nptxfspcavail); ++ ++ if (status > 0) { ++ more_to_do = 1; ++ } else if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ ++ /* Advance to next QH, skipping start-of-list entry. */ ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = ++ hcd->non_periodic_qh_ptr->next; ++ } ++ ++ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); ++ ++ if (!hcd->core_if->dma_enable) { ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ intr_mask.b.nptxfempty = 1; ++ ++#ifdef DEBUG ++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ if (more_to_do || no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the non-periodic ++ * Tx FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ dwc_modify_reg32(&global_regs->gintmsk, 0, ++ intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, ++ 0); ++ } ++ } ++} ++ ++/** ++ * This function processes the currently active host channels and queues ++ * transactions for these channels to the DWC_otg controller. It is called ++ * from HCD interrupt handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * @param tr_type The type(s) of transactions to queue (non-periodic, ++ * periodic, or both). ++ */ ++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, ++ dwc_otg_transaction_type_e tr_type) ++{ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); ++#endif ++ /* Process host channels associated with periodic transfers. */ ++ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) && ++ !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) { ++ ++ process_periodic_channels(hcd); ++ } ++ ++ /* Process host channels associated with non-periodic transfers. */ ++ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) { ++ if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) { ++ process_non_periodic_channels(hcd); ++ } else { ++ /* ++ * Ensure NP Tx FIFO empty interrupt is disabled when ++ * there are no non-periodic transfers to process. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ gintmsk.b.nptxfempty = 1; ++ dwc_modify_reg32(&hcd->core_if->core_global_regs-> ++ gintmsk, gintmsk.d32, 0); ++ } ++ } ++} ++ ++#ifdef DWC_HS_ELECT_TST ++/* ++ * Quick and dirty hack to implement the HS Electrical Test ++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. ++ * ++ * This code was copied from our userspace app "hset". It sends a ++ * Get Device Descriptor control sequence in two parts, first the ++ * Setup packet by itself, followed some time later by the In and ++ * Ack packets. Rather than trying to figure out how to add this ++ * functionality to the normal driver code, we just hijack the ++ * hardware, using these two function to drive the hardware ++ * directly. ++ */ ++ ++static dwc_otg_core_global_regs_t *global_regs; ++static dwc_otg_host_global_regs_t *hc_global_regs; ++static dwc_otg_hc_regs_t *hc_regs; ++static uint32_t *data_fifo; ++ ++static void do_setup(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ ++ /* Enable HAINTs */ ++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* ++ * Send Setup packet (Get Device Descriptor) ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++// hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ /* Fill FIFO with Setup data for Get Device Descriptor */ ++ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); ++ dwc_write_reg32(data_fifo++, 0x01000680); ++ dwc_write_reg32(data_fifo++, 0x00080000); ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ ++ /* Disable HCINTs */ ++ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++} ++ ++static void do_in_ack(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ host_grxsts_data_t grxsts; ++ ++ /* Enable HAINTs */ ++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* ++ * Receive Control In packet ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 1; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ ++ /* Read RXSTS */ ++ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer */ ++ if (grxsts.b.bcnt > 0) { ++ int i; ++ int word_count = (grxsts.b.bcnt + 3) / 4; ++ ++ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); ++ ++ for (i = 0; i < word_count; i++) { ++ (void)dwc_read_reg32(data_fifo++); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ ++ /* Read RXSTS */ ++ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ break; ++ ++ default: ++ break; ++ } ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++// usleep(100000); ++// mdelay(100); ++ dwc_mdelay(1); ++ ++ /* ++ * Send handshake packet ++ */ ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 0; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ ++ /* Disable HCINTs */ ++ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++} ++#endif ++ ++/** Handles hub class-specific requests. */ ++int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint16_t typeReq, ++ uint16_t wValue, ++ uint16_t wIndex, uint8_t * buf, uint16_t wLength) ++{ ++ int retval = 0; ++ ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ usb_hub_descriptor_t *hub_desc; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ uint32_t port_status; ++ ++ switch (typeReq) { ++ case UCR_CLEAR_HUB_FEATURE: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearHubFeature 0x%x\n", wValue); ++ switch (wValue) { ++ case UHF_C_HUB_LOCAL_POWER: ++ case UHF_C_HUB_OVER_CURRENT: ++ /* Nothing required here */ ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearHubFeature request %xh unknown\n", ++ wValue); ++ } ++ break; ++ case UCR_CLEAR_PORT_FEATURE: ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (wValue != UHF_PORT_L1) ++#endif ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ switch (wValue) { ++ case UHF_PORT_ENABLE: ++ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtena = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); ++ ++ dwc_write_reg32(core_if->pcgcctl, 0); ++ dwc_mdelay(5); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ hprt0.b.prtsusp = 0; ++ /* Clear Resume bit */ ++ dwc_mdelay(100); ++ hprt0.b.prtres = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UHF_PORT_L1: ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ glpmcfg_data_t lpmcfg = {.d32 = 0 }; ++ ++ lpmcfg.d32 = ++ dwc_read_reg32(&core_if->core_global_regs-> ++ glpmcfg); ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ lpmcfg.b.prt_sleep_sts = 1; ++ dwc_write_reg32(&core_if->core_global_regs-> ++ glpmcfg, lpmcfg.d32); ++ ++ /* Clear Enbl_L1Gating bit. */ ++ pcgcctl.b.enbl_sleep_gating = 1; ++ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, ++ 0); ++ ++ dwc_mdelay(5); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, ++ hprt0.d32); ++ /* This bit will be cleared in wakeup interrupt handle */ ++ break; ++ } ++#endif ++ case UHF_PORT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); ++ /* Port inidicator not supported */ ++ break; ++ case UHF_C_PORT_CONNECTION: ++ /* Clears drivers internal connect status change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 0; ++ break; ++ case UHF_C_PORT_RESET: ++ /* Clears the driver's internal Port Reset Change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); ++ dwc_otg_hcd->flags.b.port_reset_change = 0; ++ break; ++ case UHF_C_PORT_ENABLE: ++ /* Clears the driver's internal Port ++ * Enable/Disable Change flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); ++ dwc_otg_hcd->flags.b.port_enable_change = 0; ++ break; ++ case UHF_C_PORT_SUSPEND: ++ /* Clears the driver's internal Port Suspend ++ * Change flag, which is set when resume signaling on ++ * the host port is complete */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); ++ dwc_otg_hcd->flags.b.port_suspend_change = 0; ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UHF_C_PORT_L1: ++ dwc_otg_hcd->flags.b.port_l1_change = 0; ++ break; ++#endif ++ case UHF_C_PORT_OVER_CURRENT: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); ++ dwc_otg_hcd->flags.b.port_over_current_change = 0; ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ } ++ break; ++ case UCR_GET_HUB_DESCRIPTOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubDescriptor\n"); ++ hub_desc = (usb_hub_descriptor_t *) buf; ++ hub_desc->bDescLength = 9; ++ hub_desc->bDescriptorType = 0x29; ++ hub_desc->bNbrPorts = 1; ++ USETW(hub_desc->wHubCharacteristics, 0x08); ++ hub_desc->bPwrOn2PwrGood = 1; ++ hub_desc->bHubContrCurrent = 0; ++ hub_desc->DeviceRemovable[0] = 0; ++ hub_desc->DeviceRemovable[1] = 0xff; ++ break; ++ case UCR_GET_HUB_STATUS: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubStatus\n"); ++ DWC_MEMSET(buf, 0, 4); ++ break; ++ case UCR_GET_PORT_STATUS: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetPortStatus\n"); ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ port_status = 0; ++ ++ if (dwc_otg_hcd->flags.b.port_connect_status_change) ++ port_status |= (1 << UHF_C_PORT_CONNECTION); ++ ++ if (dwc_otg_hcd->flags.b.port_enable_change) ++ port_status |= (1 << UHF_C_PORT_ENABLE); ++ ++ if (dwc_otg_hcd->flags.b.port_suspend_change) ++ port_status |= (1 << UHF_C_PORT_SUSPEND); ++ ++ if (dwc_otg_hcd->flags.b.port_l1_change) ++ port_status |= (1 << UHF_C_PORT_L1); ++ ++ if (dwc_otg_hcd->flags.b.port_reset_change) { ++ port_status |= (1 << UHF_C_PORT_RESET); ++ } ++ ++ if (dwc_otg_hcd->flags.b.port_over_current_change) { ++ DWC_ERROR("Device Not Supported\n"); ++ port_status |= (1 << UHF_C_PORT_OVER_CURRENT); ++ } ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return 0's for the remainder of the port status ++ * since the port register can't be read if the core ++ * is in device mode. ++ */ ++ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); ++ break; ++ } ++ ++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); ++ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); ++ ++ if (hprt0.b.prtconnsts) ++ port_status |= (1 << UHF_PORT_CONNECTION); ++ ++ if (hprt0.b.prtena) ++ port_status |= (1 << UHF_PORT_ENABLE); ++ ++ if (hprt0.b.prtsusp) ++ port_status |= (1 << UHF_PORT_SUSPEND); ++ ++ if (hprt0.b.prtovrcurract) ++ port_status |= (1 << UHF_PORT_OVER_CURRENT); ++ ++ if (hprt0.b.prtrst) ++ port_status |= (1 << UHF_PORT_RESET); ++ ++ if (hprt0.b.prtpwr) ++ port_status |= (1 << UHF_PORT_POWER); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) ++ port_status |= (1 << UHF_PORT_HIGH_SPEED); ++ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ++ port_status |= (1 << UHF_PORT_LOW_SPEED); ++ ++ if (hprt0.b.prttstctl) ++ port_status |= (1 << UHF_PORT_TEST); ++ if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) { ++ port_status |= (1 << UHF_PORT_L1); ++ } ++ ++ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ ++ ++ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); ++ ++ break; ++ case UCR_SET_HUB_FEATURE: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetHubFeature\n"); ++ /* No HUB features supported */ ++ break; ++ case UCR_SET_PORT_FEATURE: ++ if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1)) ++ goto error; ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return without doing anything since the port ++ * register can't be written if the core is in device ++ * mode. ++ */ ++ break; ++ } ++ ++ switch (wValue) { ++ case UHF_PORT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); ++ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex && ++ dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.b.hstsethnpen = 1; ++ dwc_modify_reg32(&core_if->core_global_regs-> ++ gotgctl, 0, gotgctl.d32); ++ core_if->op_state = A_SUSPEND; ++ } ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ { ++ uint64_t flags; ++ /* Update lx_state */ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ core_if->lx_state = DWC_OTG_L2; ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ } ++ /* Suspend the Phy Clock */ ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ } ++ ++ /* For HNP the bus must be suspended for at least 200ms. */ ++ if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { ++ dwc_mdelay(200); ++ } ++ break; ++ case UHF_PORT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_RESET: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_RESET\n"); ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.enbl_sleep_gating = 1; ++ pcgcctl.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, ++ 0); ++ dwc_write_reg32(core_if->pcgcctl, 0); ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ { ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = ++ dwc_read_reg32(&core_if->core_global_regs-> ++ glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ dwc_write_reg32(&core_if-> ++ core_global_regs-> ++ glpmcfg, lpmcfg.d32); ++ dwc_mdelay(1); ++ } ++ } ++#endif ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ /* When B-Host the Port reset bit is set in ++ * the Start HCD Callback function, so that ++ * the reset is started within 1ms of the HNP ++ * success interrupt. */ ++ if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) { ++ hprt0.b.prtrst = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, ++ hprt0.d32); ++ } ++ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ ++ dwc_mdelay(60); ++ hprt0.b.prtrst = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ core_if->lx_state = DWC_OTG_L0; /* Now back to the on state */ ++ break; ++#ifdef DWC_HS_ELECT_TST ++ case UHF_PORT_TEST: ++ { ++ uint32_t t; ++ gintmsk_data_t gintmsk; ++ ++ t = (wIndex >> 8); /* MSB wIndex USB */ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", ++ t); ++ DWC_WARN("USB_PORT_FEAT_TEST %d\n", t); ++ if (t < 6) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prttstctl = t; ++ dwc_write_reg32(core_if->host_if->hprt0, ++ hprt0.d32); ++ } else { ++ /* Setup global vars with reg addresses (quick and ++ * dirty hack, should be cleaned up) ++ */ ++ global_regs = core_if->core_global_regs; ++ hc_global_regs = ++ core_if->host_if->host_global_regs; ++ hc_regs = ++ (dwc_otg_hc_regs_t *) ((char *) ++ global_regs + ++ 0x500); ++ data_fifo = ++ (uint32_t *) ((char *)global_regs + ++ 0x1000); ++ ++ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ dwc_read_reg32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ dwc_write_reg32(&global_regs-> ++ gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Drive suspend on the root port */ ++ hprt0.d32 = ++ dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ hprt0.b.prtres = 0; ++ dwc_write_reg32(core_if-> ++ host_if->hprt0, ++ hprt0.d32); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Drive resume on the root port */ ++ hprt0.d32 = ++ dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 0; ++ hprt0.b.prtres = 1; ++ dwc_write_reg32(core_if-> ++ host_if->hprt0, ++ hprt0.d32); ++ dwc_mdelay(100); ++ ++ /* Clear the resume bit */ ++ hprt0.b.prtres = 0; ++ dwc_write_reg32(core_if-> ++ host_if->hprt0, ++ hprt0.d32); ++ ++ /* Restore interrupts */ ++ dwc_write_reg32(&global_regs-> ++ gintmsk, ++ gintmsk.d32); ++ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ dwc_read_reg32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ dwc_write_reg32(&global_regs-> ++ gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Restore interrupts */ ++ dwc_write_reg32(&global_regs-> ++ gintmsk, ++ gintmsk.d32); ++ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ dwc_read_reg32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ dwc_write_reg32(&global_regs-> ++ gintmsk, 0); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Send the In and Ack packets */ ++ do_in_ack(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Restore interrupts */ ++ dwc_write_reg32(&global_regs-> ++ gintmsk, ++ gintmsk.d32); ++ } ++ } ++ break; ++ } ++#endif /* DWC_HS_ELECT_TST */ ++ ++ case UHF_PORT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); ++ /* Not supported */ ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "SetPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ break; ++ } ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UCR_SET_AND_TEST_PORT_FEATURE: ++ if (wValue != UHF_PORT_L1) { ++ goto error; ++ } ++ { ++ int portnum, hird, devaddr, remwake; ++ glpmcfg_data_t lpmcfg; ++ uint32_t time_usecs; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ ++ if (!dwc_otg_get_param_lpm_enable(core_if)) { ++ goto error; ++ } ++ if (wValue != UHF_PORT_L1 || wLength != 1) { ++ goto error; ++ } ++ /* Check if the port currently is in SLEEP state */ ++ lpmcfg.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ DWC_INFO("Port is already in sleep mode\n"); ++ buf[0] = 0; /* Return success */ ++ break; ++ } ++ ++ portnum = wIndex & 0xf; ++ hird = (wIndex >> 4) & 0xf; ++ devaddr = (wIndex >> 8) & 0x7f; ++ remwake = (wIndex >> 15); ++ ++ if (portnum != 1) { ++ retval = -DWC_E_INVALID; ++ DWC_WARN ++ ("Wrong port number(%d) in SetandTestPortFeature request\n", ++ portnum); ++ break; ++ } ++ ++ DWC_PRINTF ++ ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n", ++ portnum, hird, devaddr, remwake); ++ /* Disable LPM interrupt */ ++ gintmsk.d32 = 0; ++ gintmsk.b.lpmtranrcvd = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, ++ gintmsk.d32, 0); ++ ++ if (dwc_otg_hcd_send_lpm ++ (dwc_otg_hcd, devaddr, hird, remwake)) { ++ retval = -DWC_E_INVALID; ++ break; ++ } ++ ++ time_usecs = 10 * (lpmcfg.b.retry_count + 1); ++ /* We will consider timeout if time_usecs microseconds pass, ++ * and we don't receive LPM transaction status. ++ * After receiving non-error responce(ACK/NYET/STALL) from device, ++ * core will set lpmtranrcvd bit. ++ */ ++ do { ++ gintsts.d32 = ++ dwc_read_reg32(&core_if->core_global_regs-> ++ gintsts); ++ if (gintsts.b.lpmtranrcvd) { ++ break; ++ } ++ dwc_udelay(1); ++ } while (--time_usecs); ++ /* lpm_int bit will be cleared in LPM interrupt handler */ ++ ++ /* Now fill status ++ * 0x00 - Success ++ * 0x10 - NYET ++ * 0x11 - Timeout ++ */ ++ if (!gintsts.b.lpmtranrcvd) { ++ buf[0] = 0x3; /* Completion code is Timeout */ ++ dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd); ++ } else { ++ lpmcfg.d32 = ++ dwc_read_reg32(&core_if->core_global_regs-> ++ glpmcfg); ++ if (lpmcfg.b.lpm_resp == 0x3) { ++ /* ACK responce from the device */ ++ buf[0] = 0x00; /* Success */ ++ } else if (lpmcfg.b.lpm_resp == 0x2) { ++ /* NYET responce from the device */ ++ buf[0] = 0x2; ++ } else { ++ /* Otherwise responce with Timeout */ ++ buf[0] = 0x3; ++ } ++ } ++ DWC_PRINTF("Device responce to LPM trans is %x\n", ++ lpmcfg.b.lpm_resp); ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, ++ gintmsk.d32); ++ ++ break; ++ } ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ default: ++ error: ++ retval = -DWC_E_INVALID; ++ DWC_WARN("DWC OTG HCD - " ++ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", ++ typeReq, wIndex, wValue); ++ break; ++ } ++ ++ return retval; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** Returns index of host channel to perform LPM transaction. */ ++int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr) ++{ ++ dwc_otg_core_if_t *core_if = hcd->core_if; ++ dwc_hc_t *hc; ++ hcchar_data_t hcchar; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ DWC_PRINTF("No free channel to select for LPM transaction\n"); ++ return -1; ++ } ++ ++ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); ++ ++ /* Mask host channel interrupts. */ ++ gintmsk.b.hcintr = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ /* Fill fields that core needs for LPM transaction */ ++ hcchar.b.devaddr = devaddr; ++ hcchar.b.epnum = 0; ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.mps = 64; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.epdir = 0; /* OUT */ ++ dwc_write_reg32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar, ++ hcchar.d32); ++ ++ /* Remove the host channel from the free list. */ ++ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr); ++ ++ return hc->hc_num; ++} ++ ++/** Release hc after performing LPM transaction */ ++void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd) ++{ ++ dwc_hc_t *hc; ++ glpmcfg_data_t lpmcfg; ++ uint8_t hc_num; ++ ++ lpmcfg.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->glpmcfg); ++ hc_num = lpmcfg.b.lpm_chan_index; ++ ++ hc = hcd->hc_ptr_array[hc_num]; ++ ++ DWC_PRINTF("Freeing channel %d after LPM\n", hc_num); ++ /* Return host channel to free list */ ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++} ++ ++int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird, ++ uint8_t bRemoteWake) ++{ ++ glpmcfg_data_t lpmcfg; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ int channel; ++ ++ channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr); ++ if (channel < 0) { ++ return channel; ++ } ++ ++ pcgcctl.b.enbl_sleep_gating = 1; ++ dwc_modify_reg32(hcd->core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ /* Read LPM config register */ ++ lpmcfg.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->glpmcfg); ++ ++ /* Program LPM transaction fields */ ++ lpmcfg.b.rem_wkup_en = bRemoteWake; ++ lpmcfg.b.hird = hird; ++ lpmcfg.b.hird_thres = 0x1c; ++ lpmcfg.b.lpm_chan_index = channel; ++ lpmcfg.b.en_utmi_sleep = 1; ++ /* Program LPM config register */ ++ dwc_write_reg32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ /* Send LPM transaction */ ++ lpmcfg.b.send_lpm = 1; ++ dwc_write_reg32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ return 0; ++} ++ ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ ++int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port) ++{ ++ int retval; ++ ++ if (port != 1) { ++ return -DWC_E_INVALID; ++ } ++ ++ retval = (hcd->flags.b.port_connect_status_change || ++ hcd->flags.b.port_reset_change || ++ hcd->flags.b.port_enable_change || ++ hcd->flags.b.port_suspend_change || ++ hcd->flags.b.port_over_current_change); ++#ifdef DEBUG ++ if (retval) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" ++ " Root port status changed\n"); ++ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", ++ hcd->flags.b.port_connect_status_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", ++ hcd->flags.b.port_reset_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", ++ hcd->flags.b.port_enable_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", ++ hcd->flags.b.port_suspend_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", ++ hcd->flags.b.port_over_current_change); ++ } ++#endif ++ return retval; ++} ++ ++int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ hfnum_data_t hfnum; ++ hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if-> ++ host_if->host_global_regs->hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", ++ hfnum.b.frnum); ++#endif ++ return hfnum.b.frnum; ++} ++ ++int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, ++ struct dwc_otg_hcd_function_ops *fops) ++{ ++ int retval = 0; ++ ++ hcd->fops = fops; ++ if (!dwc_otg_is_device_mode(hcd->core_if)) { ++ dwc_otg_hcd_reinit(hcd); ++ } else { ++ retval = -DWC_E_NO_DEVICE; ++ } ++ ++ return retval; ++} ++ ++void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd) ++{ ++ return hcd->priv; ++} ++ ++void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data) ++{ ++ hcd->priv = priv_data; ++} ++ ++uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd) ++{ ++ return hcd->otg_port; ++} ++ ++uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd) ++{ ++ uint32_t is_b_host; ++ if (hcd->core_if->op_state == B_HOST) { ++ is_b_host = 1; ++ } else { ++ is_b_host = 0; ++ } ++ ++ return is_b_host; ++} ++ ++dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, ++ int iso_desc_count, int atomic_alloc) ++{ ++ dwc_otg_hcd_urb_t *dwc_otg_urb; ++ uint32_t size; ++ ++ size = ++ sizeof(*dwc_otg_urb) + ++ iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc); ++ if (atomic_alloc) { ++ dwc_otg_urb = dwc_alloc_atomic(size); ++ } else { ++ dwc_otg_urb = dwc_alloc(size); ++ } ++ dwc_otg_urb->packet_count = iso_desc_count; ++ ++ return dwc_otg_urb; ++} ++ ++void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ uint8_t dev_addr, uint8_t ep_num, ++ uint8_t ep_type, uint8_t ep_dir, uint16_t mps) ++{ ++ dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num, ++ ep_type, ep_dir, mps); ++#if 0 ++ DWC_PRINTF ++ ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n", ++ dev_addr, ep_num, ep_dir, ep_type, mps); ++#endif ++} ++ ++void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ void *urb_handle, void *buf, dwc_dma_t dma, ++ uint32_t buflen, void *setup_packet, ++ dwc_dma_t setup_dma, uint32_t flags, ++ uint16_t interval) ++{ ++ dwc_otg_urb->priv = urb_handle; ++ dwc_otg_urb->buf = buf; ++ dwc_otg_urb->dma = dma; ++ dwc_otg_urb->length = buflen; ++ dwc_otg_urb->setup_packet = setup_packet; ++ dwc_otg_urb->setup_dma = setup_dma; ++ dwc_otg_urb->flags = flags; ++ dwc_otg_urb->interval = interval; ++ dwc_otg_urb->status = -DWC_E_IN_PROGRESS; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->status; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->actual_length; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->error_count; ++} ++ ++void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num, uint32_t offset, ++ uint32_t length) ++{ ++ dwc_otg_urb->iso_descs[desc_num].offset = offset; ++ dwc_otg_urb->iso_descs[desc_num].length = length; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num) ++{ ++ return dwc_otg_urb->iso_descs[desc_num].status; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, int desc_num) ++{ ++ return dwc_otg_urb->iso_descs[desc_num].actual_length; ++} ++ ++int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ int allocated = 0; ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ ++ if (qh) { ++ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ allocated = 1; ++ } ++ } ++ return allocated; ++} ++ ++int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ int freed = 0; ++ DWC_ASSERT(qh, "qh is not allocated\n"); ++ ++ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ freed = 1; ++ } ++ ++ return freed; ++} ++ ++uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ DWC_ASSERT(qh, "qh is not allocated\n"); ++ return qh->usecs; ++} ++ ++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd) ++{ ++#ifdef DEBUG ++ int num_channels; ++ int i; ++ gnptxsts_data_t np_tx_status; ++ hptxsts_data_t p_tx_status; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_PRINTF("\n"); ++ DWC_PRINTF ++ ("************************************************************\n"); ++ DWC_PRINTF("HCD State:\n"); ++ DWC_PRINTF(" Num channels: %d\n", num_channels); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINTF(" Channel %d:\n", i); ++ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINTF(" speed: %d\n", hc->speed); ++ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINTF(" multi_count: %d\n", hc->multi_count); ++ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINTF(" xfer_count: %d\n", hc->xfer_count); ++ DWC_PRINTF(" halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_PRINTF(" halt_pending: %d\n", hc->halt_pending); ++ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINTF(" do_split: %d\n", hc->do_split); ++ DWC_PRINTF(" complete_split: %d\n", hc->complete_split); ++ DWC_PRINTF(" hub_addr: %d\n", hc->hub_addr); ++ DWC_PRINTF(" port_addr: %d\n", hc->port_addr); ++ DWC_PRINTF(" xact_pos: %d\n", hc->xact_pos); ++ DWC_PRINTF(" requests: %d\n", hc->requests); ++ DWC_PRINTF(" qh: %p\n", hc->qh); ++ if (hc->xfer_started) { ++ hfnum_data_t hfnum; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hfnum.d32 = ++ dwc_read_reg32(&hcd->core_if->host_if-> ++ host_global_regs->hfnum); ++ hcchar.d32 = ++ dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]-> ++ hcchar); ++ hctsiz.d32 = ++ dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]-> ++ hctsiz); ++ hcint.d32 = ++ dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]-> ++ hcint); ++ hcintmsk.d32 = ++ dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]-> ++ hcintmsk); ++ DWC_PRINTF(" hfnum: 0x%08x\n", hfnum.d32); ++ DWC_PRINTF(" hcchar: 0x%08x\n", hcchar.d32); ++ DWC_PRINTF(" hctsiz: 0x%08x\n", hctsiz.d32); ++ DWC_PRINTF(" hcint: 0x%08x\n", hcint.d32); ++ DWC_PRINTF(" hcintmsk: 0x%08x\n", hcintmsk.d32); ++ } ++ if (hc->xfer_started && hc->qh) { ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) { ++ if(!qtd->in_process) ++ break; ++ ++ urb = qtd->urb; ++ DWC_PRINTF(" URB Info:\n"); ++ DWC_PRINTF(" qtd: %p, urb: %p\n", qtd, urb); ++ if (urb) { ++ DWC_PRINTF(" Dev: %d, EP: %d %s\n", ++ dwc_otg_hcd_get_dev_addr(&urb-> ++ pipe_info), ++ dwc_otg_hcd_get_ep_num(&urb-> ++ pipe_info), ++ dwc_otg_hcd_is_pipe_in(&urb-> ++ pipe_info) ? ++ "IN" : "OUT"); ++ DWC_PRINTF(" Max packet size: %d\n", ++ dwc_otg_hcd_get_mps(&urb-> ++ pipe_info)); ++ DWC_PRINTF(" transfer_buffer: %p\n", ++ urb->buf); ++ DWC_PRINTF(" transfer_dma: %p\n", ++ (void *)urb->dma); ++ DWC_PRINTF(" transfer_buffer_length: %d\n", ++ urb->length); ++ DWC_PRINTF(" actual_length: %d\n", ++ urb->actual_length); ++ } ++ } ++ } ++ } ++ DWC_PRINTF(" non_periodic_channels: %d\n", hcd->non_periodic_channels); ++ DWC_PRINTF(" periodic_channels: %d\n", hcd->periodic_channels); ++ DWC_PRINTF(" periodic_usecs: %d\n", hcd->periodic_usecs); ++ np_tx_status.d32 = ++ dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts); ++ DWC_PRINTF(" NP Tx Req Queue Space Avail: %d\n", ++ np_tx_status.b.nptxqspcavail); ++ DWC_PRINTF(" NP Tx FIFO Space Avail: %d\n", ++ np_tx_status.b.nptxfspcavail); ++ p_tx_status.d32 = ++ dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts); ++ DWC_PRINTF(" P Tx Req Queue Space Avail: %d\n", ++ p_tx_status.b.ptxqspcavail); ++ DWC_PRINTF(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); ++ dwc_otg_hcd_dump_frrem(hcd); ++ dwc_otg_dump_global_registers(hcd->core_if); ++ dwc_otg_dump_host_registers(hcd->core_if); ++ DWC_PRINTF ++ ("************************************************************\n"); ++ DWC_PRINTF("\n"); ++#endif ++} ++ ++#ifdef DEBUG ++void dwc_print_setup_data(uint8_t * setup) ++{ ++ int i; ++ if (CHK_DEBUG_LEVEL(DBG_HCD)) { ++ DWC_PRINTF("Setup Data = MSB "); ++ for (i = 7; i >= 0; i--) ++ DWC_PRINTF("%02x ", setup[i]); ++ DWC_PRINTF("\n"); ++ DWC_PRINTF(" bmRequestType Tranfer = %s\n", ++ (setup[0] & 0x80) ? "Device-to-Host" : ++ "Host-to-Device"); ++ DWC_PRINTF(" bmRequestType Type = "); ++ switch ((setup[0] & 0x60) >> 5) { ++ case 0: ++ DWC_PRINTF("Standard\n"); ++ break; ++ case 1: ++ DWC_PRINTF("Class\n"); ++ break; ++ case 2: ++ DWC_PRINTF("Vendor\n"); ++ break; ++ case 3: ++ DWC_PRINTF("Reserved\n"); ++ break; ++ } ++ DWC_PRINTF(" bmRequestType Recipient = "); ++ switch (setup[0] & 0x1f) { ++ case 0: ++ DWC_PRINTF("Device\n"); ++ break; ++ case 1: ++ DWC_PRINTF("Interface\n"); ++ break; ++ case 2: ++ DWC_PRINTF("Endpoint\n"); ++ break; ++ case 3: ++ DWC_PRINTF("Other\n"); ++ break; ++ default: ++ DWC_PRINTF("Reserved\n"); ++ break; ++ } ++ DWC_PRINTF(" bRequest = 0x%0x\n", setup[1]); ++ DWC_PRINTF(" wValue = 0x%0x\n", *((uint16_t *) & setup[2])); ++ DWC_PRINTF(" wIndex = 0x%0x\n", *((uint16_t *) & setup[4])); ++ DWC_PRINTF(" wLength = 0x%0x\n\n", *((uint16_t *) & setup[6])); ++ } ++} ++#endif ++ ++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd) ++{ ++#if 0 ++ DWC_PRINTF("Frame remaining at SOF:\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->frrem_samples, hcd->frrem_accum, ++ (hcd->frrem_samples > 0) ? ++ hcd->frrem_accum / hcd->frrem_samples : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_7_samples, ++ hcd->core_if->hfnum_7_frrem_accum, ++ (hcd->core_if->hfnum_7_samples > ++ 0) ? hcd->core_if->hfnum_7_frrem_accum / ++ hcd->core_if->hfnum_7_samples : 0); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_0_samples, ++ hcd->core_if->hfnum_0_frrem_accum, ++ (hcd->core_if->hfnum_0_samples > ++ 0) ? hcd->core_if->hfnum_0_frrem_accum / ++ hcd->core_if->hfnum_0_samples : 0); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_other_samples, ++ hcd->core_if->hfnum_other_frrem_accum, ++ (hcd->core_if->hfnum_other_samples > ++ 0) ? hcd->core_if->hfnum_other_frrem_accum / ++ hcd->core_if->hfnum_other_samples : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a, ++ (hcd->hfnum_7_samples_a > 0) ? ++ hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a, ++ (hcd->hfnum_0_samples_a > 0) ? ++ hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a, ++ (hcd->hfnum_other_samples_a > 0) ? ++ hcd->hfnum_other_frrem_accum_a / ++ hcd->hfnum_other_samples_a : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b, ++ (hcd->hfnum_7_samples_b > 0) ? ++ hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b, ++ (hcd->hfnum_0_samples_b > 0) ? ++ hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b, ++ (hcd->hfnum_other_samples_b > 0) ? ++ hcd->hfnum_other_frrem_accum_b / ++ hcd->hfnum_other_samples_b : 0); ++#endif ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,1106 @@ ++/*========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $ ++ * $Revision: #2 $ ++ * $Date: 2009/04/21 $ ++ * $Change: 1237473 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** @file ++ * This file contains Descriptor DMA support implementation for host mode. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++ ++static inline uint8_t frame_list_idx(uint16_t frame) ++{ ++ return (frame & (MAX_FRLIST_EN_NUM - 1)); ++} ++ ++static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed) ++{ ++ return (idx + inc) & ++ (((speed == DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC) - 1); ++} ++ ++static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed) ++{ ++ return (idx - inc) & ++ (((speed == DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC) - 1); ++} ++ ++static inline uint16_t max_desc_num(dwc_otg_qh_t * qh) ++{ ++ return (((qh->ep_type == UE_ISOCHRONOUS) && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)) ++ ? ++ MAX_DMA_DESC_NUM_HS_ISOC ++ : ++ MAX_DMA_DESC_NUM_GENERIC); ++} ++static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh) ++{ ++ return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) ++ ? ((qh->interval + 8 - 1) / 8) ++ : ++ qh->interval); ++} ++ ++static int desc_list_alloc(dwc_otg_qh_t * qh) ++{ ++ int retval = 0; ++ ++ qh->desc_list = (dwc_otg_host_dma_desc_t *) ++ dwc_dma_alloc(sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh), ++ &qh->desc_list_dma ++ ); ++ ++ if (!qh->desc_list) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__); ++ ++ } ++ ++ dwc_memset(qh->desc_list, 0x00, sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); ++ ++ ++ qh->n_bytes = (uint32_t *) dwc_alloc(sizeof(uint32_t) * max_desc_num(qh)); ++ ++ if (!qh->n_bytes) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: Failed to allocate array for descriptors' size actual values\n", ++ __func__); ++ ++ } ++ return retval; ++ ++} ++ ++static void desc_list_free(dwc_otg_qh_t * qh) ++{ ++ if(qh->desc_list) { ++ dwc_dma_free(max_desc_num(qh), qh->desc_list, qh->desc_list_dma); ++ qh->desc_list = NULL; ++ } ++ ++ if (qh->n_bytes) { ++ dwc_free(qh->n_bytes); ++ qh->n_bytes = NULL; ++ } ++} ++ ++static int frame_list_alloc(dwc_otg_hcd_t * hcd) ++{ ++ int retval = 0; ++ if (hcd->frame_list) ++ return 0; ++ ++ hcd->frame_list = dwc_dma_alloc(4 * MAX_FRLIST_EN_NUM, ++ &hcd->frame_list_dma ++ ); ++ if (!hcd->frame_list) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: Frame List allocation failed\n", __func__); ++ } ++ ++ dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM); ++ ++ return retval; ++} ++ ++static void frame_list_free(dwc_otg_hcd_t * hcd) ++{ ++ if (!hcd->frame_list) ++ return; ++ ++ dwc_dma_free(4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma); ++ hcd->frame_list = NULL; ++} ++ ++static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en) ++{ ++ ++ hcfg_data_t hcfg; ++ ++ hcfg.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hcfg); ++ ++ if (hcfg.b.perschedstat) { ++ /* already enabled*/ ++ return; ++ } ++ ++ dwc_write_reg32(&hcd->core_if->host_if->host_global_regs->hflbaddr, hcd->frame_list_dma); ++ ++ switch(fr_list_en) { ++ case 64: ++ hcfg.b.frlisten = 3; ++ break; ++ case 32: ++ hcfg.b.frlisten = 2; ++ break; ++ case 16: ++ hcfg.b.frlisten = 1; ++ case 8: ++ hcfg.b.frlisten = 0; ++ default: ++ break; ++ } ++ ++ hcfg.b.perschedena = 1; ++ ++ DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n"); ++ dwc_write_reg32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++ ++} ++ ++static void per_sched_disable(dwc_otg_hcd_t * hcd) ++{ ++ hcfg_data_t hcfg; ++ ++ hcfg.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hcfg); ++ ++ if (!hcfg.b.perschedstat) { ++ /* already disabled */ ++ return; ++ } ++ hcfg.b.perschedena = 0; ++ ++ DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n"); ++ dwc_write_reg32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/* ++ * Activates/Deactivates FrameList entries for the channel ++ * based on endpoint servicing period. ++ */ ++void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable) ++{ ++ uint16_t i, j, inc; ++ dwc_hc_t *hc = qh->channel; ++ ++ inc = frame_incr_val(qh); ++ ++ if (qh->ep_type == UE_ISOCHRONOUS) ++ i = frame_list_idx(qh->sched_frame); ++ else ++ i = 0; ++ ++ j = i; ++ do { ++ if (enable) ++ hcd->frame_list[j] |= (1 << hc->hc_num); ++ else ++ hcd->frame_list[j] &= ~(1 << hc->hc_num); ++ j = (j + inc) & (MAX_FRLIST_EN_NUM - 1); ++ } ++ while (j != i); ++ ++ if (!enable) ++ return; ++ ++ hc->schinfo = 0; ++ if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) { ++ j = 1; ++ for (i = 0 ; i < 8 / qh->interval; i++) { ++ hc->schinfo |= j; ++ j = j << qh->interval; ++ } ++ } ++ else { ++ hc->schinfo = 0xff; ++ } ++} ++#if 1 ++void dump_frame_list(dwc_otg_hcd_t * hcd) ++{ ++ int i = 0; ++ DWC_PRINTF("--FRAME LIST (hex) --\n"); ++ for (i = 0; i < MAX_FRLIST_EN_NUM; i++) { ++ DWC_PRINTF("%x\t",hcd->frame_list[i]); ++ if (!(i % 8) && i) ++ DWC_PRINTF("\n"); ++ } ++ DWC_PRINTF("\n----\n"); ++ ++} ++#endif ++ ++static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_hc_t *hc = qh->channel; ++ if (dwc_qh_is_non_per(qh)) { ++ hcd->non_periodic_channels--; ++ } ++ else { ++ update_frame_list(hcd, qh, 0); ++ } ++ /* ++ * The condition is added to prevent double cleanup try in case of device ++ * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb(). ++ */ ++ if (hc->qh) { ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++ hc->qh = NULL; ++ } ++ ++ qh->channel = NULL; ++ qh->ntd = 0; ++ ++ if (qh->desc_list) { ++ dwc_memset(qh->desc_list, 0x00, ++ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); ++ } ++} ++ ++/** ++ * Initializes a QH structure's Descriptor DMA related members. ++ * Allocates memory for descriptor list. ++ * On first periodic QH, allocates memory for FrameList ++ * and enables periodic scheduling. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int retval = 0; ++ ++ if (qh->do_split) { ++ DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n"); ++ return -1; ++ } ++ ++ retval = desc_list_alloc(qh); ++ ++ if ((retval == 0) && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) { ++ if(!hcd->frame_list) { ++ retval = frame_list_alloc(hcd); ++ /* Enable periodic schedule on first periodic QH */ ++ if (retval == 0) ++ per_sched_enable(hcd, MAX_FRLIST_EN_NUM); ++ } ++ } ++ ++ qh->ntd = 0; ++ ++ return retval; ++} ++ ++/** ++ * Frees descriptor list memory associated with the QH. ++ * If QH is periodic and the last, frees FrameList memory ++ * and disables periodic scheduling. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ */ ++void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ desc_list_free(qh); ++ ++ /* ++ * Channel still assigned due to some reasons. ++ * Seen on Isoc URB dequeue. Channel halted but no subsequent ++ * ChHalted interrupt to release the channel. Afterwards ++ * when it comes here from endpoint disable routine ++ * channel remains assigned. ++ */ ++ if (qh->channel) ++ release_channel_ddma(hcd, qh); ++ ++ if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT) ++ && !hcd->periodic_channels && hcd->frame_list) { ++ ++ per_sched_disable(hcd); ++ frame_list_free(hcd); ++ } ++} ++ ++static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx) ++{ ++ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { ++ /* ++ * Descriptor set(8 descriptors) index ++ * which is 8-aligned. ++ */ ++ return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8; ++ } ++ else { ++ return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1)); ++ } ++} ++ ++/* ++ * Determine starting frame for Isochronous transfer. ++ * Few frames skipped to prevent race condition with HC. ++ */ ++static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t* skip_frames) ++{ ++ uint16_t frame = 0; ++ hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd); ++ ++ /* sched_frame is always frame number(not uFrame) both in FS and HS !! */ ++ ++ /* ++ * skip_frames is used to limit activated descriptors number ++ * to avoid the situation when HC services the last activated ++ * descriptor firstly. ++ * Example for FS: ++ * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor ++ * corresponding to curr_frame+1, the descriptor corresponding to frame 2 ++ * will be fetched. If the number of descriptors is max=64 (or greather) the list will ++ * be fully programmed with Active descriptors and it is possible case(rare) that the latest ++ * descriptor(considering rollback) corresponding to frame 2 will be serviced first. ++ * HS case is more probable because, in fact, up to 11 uframes(16 in the code) ++ * may be skipped. ++ */ ++ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { ++ /* ++ * Consider uframe counter also, to start xfer asap. ++ * If half of the frame elapsed skip 2 frames otherwise ++ * just 1 frame. ++ * Starting descriptor index must be 8-aligned, so ++ * if the current frame is near to complete the next one ++ * is skipped as well. ++ */ ++ ++ if (dwc_micro_frame_num(hcd->frame_number) >= 5) { ++ *skip_frames = 2 * 8; ++ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); ++ } ++ else { ++ *skip_frames = 1 * 8; ++ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); ++ } ++ ++ frame = dwc_full_frame_num(frame); ++ } else { ++ /* ++ * Two frames are skipped for FS - the current and the next. ++ * But for descriptor programming, 1 frame(descriptor) is enough, ++ * see example above. ++ */ ++ *skip_frames = 1; ++ frame = dwc_frame_num_inc(hcd->frame_number, 2); ++ } ++ ++ return frame; ++} ++/* ++ * Calculate initial descriptor index for isochronous transfer ++ * based on scheduled frame. ++ */ ++static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ uint16_t frame = 0, fr_idx, fr_idx_tmp; ++ uint8_t skip_frames = 0 ; ++ /* ++ * With current ISOC processing algorithm the channel is being ++ * released when no more QTDs in the list(qh->ntd == 0). ++ * Thus this function is called only when qh->ntd == 0 and qh->channel == 0. ++ * ++ * So qh->channel != NULL branch is not used and just not removed from the ++ * source file. It is required for another possible approach which is, ++ * do not disable and release the channel when ISOC session completed, ++ * just move QH to inactive schedule until new QTD arrives. ++ * On new QTD, the QH moved back to 'ready' schedule, ++ * starting frame and therefore starting desc_index are recalculated. ++ * In this case channel is released only on ep_disable. ++ */ ++ ++ /* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */ ++ if (qh->channel) { ++ frame = calc_starting_frame(hcd, qh, &skip_frames); ++ /* ++ * Calculate initial descriptor index based on FrameList current bitmap ++ * and servicing period. ++ */ ++ fr_idx_tmp = frame_list_idx(frame); ++ fr_idx = (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) - fr_idx_tmp) ++ % frame_incr_val(qh); ++ fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM; ++ } ++ else { ++ qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames); ++ fr_idx = frame_list_idx(qh->sched_frame); ++ } ++ ++ qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx); ++ ++ return skip_frames; ++} ++ ++#define ISOC_URB_GIVEBACK_ASAP ++ ++#define MAX_ISOC_XFER_SIZE_FS 1023 ++#define MAX_ISOC_XFER_SIZE_HS 3072 ++#define DESCNUM_THRESHOLD 4 ++ ++static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t skip_frames) ++{ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint16_t idx, inc, n_desc, ntd_max, max_xfer_size; ++ ++ idx = qh->td_last; ++ inc = qh->interval; ++ n_desc = 0; ++ ++ ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval; ++ if (skip_frames && !qh->channel) ++ ntd_max = ntd_max - skip_frames / qh->interval; ++ ++ max_xfer_size = (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS ++ : MAX_ISOC_XFER_SIZE_FS; ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { ++ while ((qh->ntd < ntd_max) && (qtd->isoc_frame_index_last < qtd->urb->packet_count)) { ++ ++ dma_desc = &qh->desc_list[idx]; ++ dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t)); ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; ++ ++ if (frame_desc->length > max_xfer_size) ++ qh->n_bytes[idx] = max_xfer_size; ++ else ++ qh->n_bytes[idx] = frame_desc->length; ++ dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx]; ++ dma_desc->status.b_isoc.a = 1; ++ ++ dma_desc->buf = qtd->urb->dma + frame_desc->offset; ++ ++ qh->ntd++; ++ ++ qtd->isoc_frame_index_last++; ++ ++ #ifdef ISOC_URB_GIVEBACK_ASAP ++ /* ++ * Set IOC for each descriptor corresponding to the ++ * last frame of the URB. ++ */ ++ if (qtd->isoc_frame_index_last == qtd->urb->packet_count) ++ dma_desc->status.b_isoc.ioc = 1; ++ ++ #endif ++ idx = desclist_idx_inc(idx, inc, qh->dev_speed); ++ n_desc++; ++ ++ } ++ qtd->in_process = 1; ++ } ++ ++ qh->td_last = idx; ++ ++#ifdef ISOC_URB_GIVEBACK_ASAP ++ /* Set IOC for the last descriptor if descriptor list is full */ ++ if (qh->ntd == ntd_max) { ++ idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed); ++ qh->desc_list[idx].status.b_isoc.ioc = 1; ++ } ++#else ++ /* ++ * Set IOC bit only for one descriptor. ++ * Always try to be ahead of HW processing, ++ * i.e. on IOC generation driver activates next descriptors but ++ * core continues to process descriptors followed the one with IOC set. ++ */ ++ ++ if (n_desc > DESCNUM_THRESHOLD) { ++ /* ++ * Move IOC "up". Required even if there is only one QTD ++ * in the list, cause QTDs migth continue to be queued, ++ * but during the activation it was only one queued. ++ * Actually more than one QTD might be in the list if this function called ++ * from XferCompletion - QTDs was queued during HW processing of the previous ++ * descriptor chunk. ++ */ ++ idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed); ++ } ++ else { ++ /* ++ * Set the IOC for the latest descriptor ++ * if either number of descriptor is not greather than threshold ++ * or no more new descriptors activated. ++ */ ++ idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); ++ } ++ ++ qh->desc_list[idx].status.b_isoc.ioc = 1; ++#endif ++} ++ ++ ++static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ ++ dwc_hc_t *hc; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ dwc_otg_qtd_t *qtd; ++ int num_packets, len, n_desc = 0; ++ ++ hc = qh->channel; ++ ++ /* ++ * Start with hc->xfer_buff initialized in ++ * assign_and_init_hc(), then if SG transfer consists of multiple URBs, ++ * this pointer re-assigned to the buffer of the currently processed QTD. ++ * For non-SG request there is always one QTD active. ++ */ ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { ++ ++ if (n_desc) { ++ /* SG request - more than 1 QTDs */ ++ hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length; ++ hc->xfer_len = qtd->urb->length - qtd->urb->actual_length; ++ } ++ ++ qtd->n_desc = 0; ++ ++ do { ++ dma_desc = &qh->desc_list[n_desc]; ++ len = hc->xfer_len; ++ ++ ++ if (len > MAX_DMA_DESC_SIZE) ++ len = MAX_DMA_DESC_SIZE - hc->max_packet + 1; ++ ++ if (hc->ep_is_in) { ++ if (len > 0) { ++ num_packets = (len + hc->max_packet - 1) / hc->max_packet; ++ } ++ else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ /* Always program an integral # of max packets for IN transfers. */ ++ len = num_packets * hc->max_packet; ++ } ++ ++ dma_desc->status.b.n_bytes = len; ++ ++ qh->n_bytes[n_desc] = len; ++ ++ ++ if ((qh->ep_type == UE_CONTROL) && (qtd->control_phase == DWC_OTG_CONTROL_SETUP)) ++ dma_desc->status.b.sup = 1; /* Setup Packet */ ++ ++ dma_desc->status.b.a = 1; /* Active descriptor */ ++ ++ dma_desc->buf = (uint32_t) hc->xfer_buff; ++ ++ /* ++ * Last descriptor(or single) of IN transfer ++ * with actual size less than MaxPacket. ++ */ ++ if (len > hc->xfer_len) { ++ hc->xfer_len = 0; ++ } ++ else { ++ hc->xfer_buff += len; ++ hc->xfer_len -= len; ++ } ++ ++ qtd->n_desc++; ++ n_desc++; ++ } ++ while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC)); ++ ++ ++ qtd->in_process = 1; ++ ++ if (n_desc == MAX_DMA_DESC_NUM_GENERIC) ++ break; ++ } ++ ++ if (n_desc) { ++ /* Request Transfer Complete interrupt for the last descriptor */ ++ qh->desc_list[n_desc-1].status.b.ioc = 1; ++ /* End of List indicator */ ++ qh->desc_list[n_desc-1].status.b.eol = 1; ++ ++ hc->ntd = n_desc; ++ } ++} ++ ++/** ++ * For Control and Bulk endpoints initializes descriptor list ++ * and starts the transfer. ++ * ++ * For Interrupt and Isochronous endpoints initializes descriptor list ++ * then updates FrameList, marking appropriate entries as active. ++ * In case of Isochronous, the starting descriptor index is calculated based ++ * on the scheduled frame, but only on the first transfer descriptor within a session. ++ * Then starts the transfer via enabling the channel. ++ * For Isochronous endpoint the channel is not halted on XferComplete ++ * interrupt so remains assigned to the endpoint(QH) until session is done. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ /* Channel is already assigned */ ++ dwc_hc_t *hc = qh->channel; ++ uint8_t skip_frames = 0; ++ ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ init_non_isoc_dma_desc(hcd, qh); ++ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ init_non_isoc_dma_desc(hcd, qh); ++ ++ update_frame_list(hcd, qh, 1); ++ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ ++ if(!qh->ntd) ++ skip_frames = recalc_initial_desc_idx(hcd, qh); ++ ++ init_isoc_dma_desc(hcd, qh, skip_frames); ++ ++ if (!hc->xfer_started) { ++ ++ update_frame_list(hcd, qh, 1); ++ ++ /* ++ * Always set to max, instead of actual size. ++ * Otherwise ntd will be changed with ++ * channel being enabled. Not recommended. ++ * ++ */ ++ hc->ntd = max_desc_num(qh); ++ /* Enable channel only once for ISOC */ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ } ++ ++ break; ++ default: ++ ++ break; ++ } ++} ++ ++static void complete_isoc_xfer_ddma(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint16_t idx, remain; ++ uint8_t urb_compl; ++ ++ qh = hc->qh; ++ idx = qh->td_first; ++ ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) ++ qtd->in_process = 0; ++ return; ++ } ++ else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) || ++ (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) { ++ /* ++ * Channel is halted in these error cases. ++ * Considered as serious issues. ++ * Complete all URBs marking all frames as failed, ++ * irrespective whether some of the descriptors(frames) succeeded or no. ++ * Pass error code to completion routine as well, to ++ * update urb->status, some of class drivers might use it to stop ++ * queing transfer requests. ++ */ ++ int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR) ++ ? (-DWC_E_IO) ++ : (-DWC_E_OVERFLOW); ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ for(idx = 0; idx < qtd->urb->packet_count; idx++) { ++ frame_desc = &qtd->urb->iso_descs[idx]; ++ frame_desc->status = err; ++ } ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ } ++ return; ++ } ++ ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ ++ if (!qtd->in_process) ++ break; ++ ++ urb_compl = 0; ++ ++ do { ++ ++ dma_desc = &qh->desc_list[idx]; ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0; ++ ++ if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) { ++ /* ++ * XactError or, unable to complete all the transactions ++ * in the scheduled micro-frame/frame, ++ * both indicated by DMA_DESC_STS_PKTERR. ++ */ ++ qtd->urb->error_count++; ++ frame_desc->actual_length = qh->n_bytes[idx] - remain; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ } ++ else { ++ /* Success */ ++ ++ frame_desc->actual_length = qh->n_bytes[idx] - remain; ++ frame_desc->status = 0; ++ } ++ ++ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { ++ /* ++ * urb->status is not used for isoc transfers here. ++ * The individual frame_desc status are used instead. ++ */ ++ ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ ++ /* ++ * This check is necessary because urb_dequeue can be called ++ * from urb complete callback(sound driver example). ++ * All pending URBs are dequeued there, so no need for ++ * further processing. ++ */ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ return; ++ } ++ ++ urb_compl = 1; ++ ++ } ++ ++ qh->ntd--; ++ ++ /* Stop if IOC requested descriptor reached */ ++ if (dma_desc->status.b_isoc.ioc) { ++ idx = desclist_idx_inc(idx, qh->interval, hc->speed); ++ goto stop_scan; ++ } ++ ++ idx = desclist_idx_inc(idx, qh->interval, hc->speed); ++ ++ if (urb_compl) ++ break; ++ } ++ while(idx != qh->td_first); ++ } ++stop_scan: ++ qh->td_first = idx; ++} ++ ++uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_host_dma_desc_t * dma_desc, ++ dwc_otg_halt_status_e halt_status, ++ uint32_t n_bytes, ++ uint8_t *xfer_done) ++{ ++ ++ uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ ++ if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ urb->status = -DWC_E_IO; ++ return 1; ++ } ++ if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) { ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_STALL: ++ urb->status = -DWC_E_PIPE; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ urb->status = -DWC_E_OVERFLOW; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ urb->status = -DWC_E_PROTOCOL; ++ break; ++ default: ++ DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__, ++ halt_status); ++ break; ++ } ++ return 1; ++ } ++ ++ if (dma_desc->status.b.a == 1) { ++ DWC_DEBUGPL(DBG_HCDV, "Active descriptor encountered on channel %d\n", hc->hc_num); ++ return 0; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) { ++ if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { ++ urb->actual_length += n_bytes - remain; ++ if (remain || urb->actual_length == urb->length) { ++ /* ++ * For Control Data stage do not set urb->status=0 to prevent ++ * URB callback. Set it when Status phase done. See below. ++ */ ++ *xfer_done = 1; ++ } ++ ++ } ++ else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) { ++ urb->status = 0; ++ *xfer_done = 1; ++ } ++ /* No handling for SETUP stage */ ++ ++ } ++ else { ++ /* BULK and INTR */ ++ urb->actual_length += n_bytes - remain; ++ if (remain || urb->actual_length == urb->length) { ++ urb->status = 0; ++ *xfer_done = 1; ++ } ++ } ++ ++ return 0; ++} ++ ++static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_hcd_urb_t *urb = NULL; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint32_t n_bytes, n_desc, i; ++ uint8_t failed = 0, xfer_done; ++ ++ n_desc = 0; ++ ++ qh = hc->qh; ++ ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ qtd->in_process = 0; ++ } ++ return; ++ } ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { ++ ++ urb = qtd->urb; ++ ++ n_bytes = 0; ++ xfer_done = 0; ++ ++ for (i = 0; i < qtd->n_desc; i++) { ++ dma_desc = &qh->desc_list[n_desc]; ++ ++ n_bytes = qh->n_bytes[n_desc]; ++ ++ ++ failed = update_non_isoc_urb_state_ddma(hcd, hc, qtd, dma_desc, ++ halt_status, n_bytes, &xfer_done); ++ ++ if (failed || (xfer_done && (urb->status != -DWC_E_IN_PROGRESS))) { ++ ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ ++ if (failed) ++ goto stop_scan; ++ } ++ else if (qh->ep_type == UE_CONTROL) { ++ if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) { ++ if (urb->length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); ++ } ++ else if(qtd->control_phase == DWC_OTG_CONTROL_DATA) { ++ if (xfer_done) { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); ++ } else if (i+1 == qtd->n_desc){ ++ /* ++ * Last descriptor for Control data stage which is ++ * not completed yet. ++ */ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ } ++ } ++ ++ n_desc++; ++ } ++ ++ } ++ ++stop_scan: ++ ++ if (qh->ep_type != UE_CONTROL) { ++ /* ++ * Resetting the data toggle for bulk ++ * and interrupt endpoints in case of stall. See handle_hc_stall_intr() ++ */ ++ if (halt_status == DWC_OTG_HC_XFER_STALL) { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } ++ else { ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ } ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ hcint_data_t hcint; ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. It ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ } ++ ++} ++ ++/** ++ * This function is called from interrupt handlers. ++ * Scans the descriptor list, updates URB's status and ++ * calls completion routine for the URB if it's done. ++ * Releases the channel to be used by other transfers. ++ * In case of Isochronous endpoint the channel is not halted until ++ * the end of the session, i.e. QTD list is empty. ++ * If periodic channel released the FrameList is updated accordingly. ++ * ++ * Calls transaction selection routines to activate pending transfers. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param hc Host channel, the transfer is completed on. ++ * @param hc_regs Host channel registers. ++ * @param halt_status Reason the channel is being halted, ++ * or just XferComplete for isochronous transfer ++ */ ++void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint8_t continue_isoc_xfer = 0; ++ dwc_otg_transaction_type_e tr_type; ++ dwc_otg_qh_t *qh = hc->qh; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ ++ complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ ++ /* Release the channel if halted or session completed */ ++ if (halt_status != DWC_OTG_HC_XFER_COMPLETE || ++ DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ ++ /* Halt the channel if session completed */ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ } ++ ++ release_channel_ddma(hcd, qh); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } ++ else { ++ /* Keep in assigned schedule to continue transfer */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &qh->qh_list_entry); ++ continue_isoc_xfer = 1; ++ ++ } ++ /** @todo Consider the case when period exceeds FrameList size. ++ * Frame Rollover interrupt should be used. ++ */ ++ } ++ else { ++ /* Scan descriptor list to complete the URB(s), then release the channel */ ++ complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ ++ release_channel_ddma(hcd, qh); ++ ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ ++ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule on normal completion */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ } ++ ++ ++ } ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) { ++ if (continue_isoc_xfer) { ++ if (tr_type == DWC_OTG_TRANSACTION_NONE) { ++ tr_type = DWC_OTG_TRANSACTION_PERIODIC; ++ } else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) { ++ tr_type = DWC_OTG_TRANSACTION_ALL; ++ } ++ } ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,804 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ ++ * $Revision: #52 $ ++ * $Date: 2009/04/21 $ ++ * $Change: 1237472 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_H__ ++#define __DWC_HCD_H__ ++ ++#include ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_list.h" ++#include "dwc_otg_cil.h" ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Host Contoller Driver (HCD). ++ * ++ * The Host Controller Driver (HCD) is responsible for translating requests ++ * from the USB Driver into the appropriate actions on the DWC_otg controller. ++ * It isolates the USBD from the specifics of the controller by providing an ++ * API to the USBD. ++ */ ++ ++struct dwc_otg_hcd_pipe_info { ++ uint8_t dev_addr; ++ uint8_t ep_num; ++ uint8_t pipe_type; ++ uint8_t pipe_dir; ++ uint16_t mps; ++}; ++ ++struct dwc_otg_hcd_iso_packet_desc { ++ uint32_t offset; ++ uint32_t length; ++ uint32_t actual_length; ++ uint32_t status; ++}; ++ ++struct dwc_otg_qtd; ++ ++struct dwc_otg_hcd_urb { ++ void *priv; ++ struct dwc_otg_qtd *qtd; ++ void *buf; ++ dwc_dma_t dma; ++ void *setup_packet; ++ dwc_dma_t setup_dma; ++ uint32_t length; ++ uint32_t actual_length; ++ uint32_t status; ++ uint32_t error_count; ++ uint32_t packet_count; ++ uint32_t flags; ++ uint16_t interval; ++ struct dwc_otg_hcd_pipe_info pipe_info; ++ struct dwc_otg_hcd_iso_packet_desc iso_descs[0]; ++}; ++ ++static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return pipe->ep_num; ++} ++ ++static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return pipe->pipe_type; ++} ++ ++static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return pipe->mps; ++} ++ ++static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return pipe->dev_addr; ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_ISOCHRONOUS); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_INTERRUPT); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_BULK); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_CONTROL); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return (pipe->pipe_dir == UE_DIR_IN); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (!dwc_otg_hcd_is_pipe_in(pipe)); ++} ++ ++static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe, ++ uint8_t devaddr, uint8_t ep_num, ++ uint8_t pipe_type, uint8_t pipe_dir, ++ uint16_t mps) ++{ ++ pipe->dev_addr = devaddr; ++ pipe->ep_num = ep_num; ++ pipe->pipe_type = pipe_type; ++ pipe->pipe_dir = pipe_dir; ++ pipe->mps = mps; ++} ++ ++/** ++ * Phases for control transfers. ++ */ ++typedef enum dwc_otg_control_phase { ++ DWC_OTG_CONTROL_SETUP, ++ DWC_OTG_CONTROL_DATA, ++ DWC_OTG_CONTROL_STATUS ++} dwc_otg_control_phase_e; ++ ++/** Transaction types. */ ++typedef enum dwc_otg_transaction_type { ++ DWC_OTG_TRANSACTION_NONE, ++ DWC_OTG_TRANSACTION_PERIODIC, ++ DWC_OTG_TRANSACTION_NON_PERIODIC, ++ DWC_OTG_TRANSACTION_ALL ++} dwc_otg_transaction_type_e; ++ ++struct dwc_otg_qh; ++ ++/** ++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, ++ * interrupt, or isochronous transfer. A single QTD is created for each URB ++ * (of one of these types) submitted to the HCD. The transfer associated with ++ * a QTD may require one or multiple transactions. ++ * ++ * A QTD is linked to a Queue Head, which is entered in either the ++ * non-periodic or periodic schedule for execution. When a QTD is chosen for ++ * execution, some or all of its transactions may be executed. After ++ * execution, the state of the QTD is updated. The QTD may be retired if all ++ * its transactions are complete or if an error occurred. Otherwise, it ++ * remains in the schedule so more transactions can be executed later. ++ */ ++typedef struct dwc_otg_qtd { ++ /** ++ * Determines the PID of the next data packet for the data phase of ++ * control transfers. Ignored for other transfer types.
++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Current phase for control transfers (Setup, Data, or Status). */ ++ dwc_otg_control_phase_e control_phase; ++ ++ /** Keep track of the current split type ++ * for FS/LS endpoints on a HS Hub */ ++ uint8_t complete_split; ++ ++ /** How many bytes transferred during SSPLIT OUT */ ++ uint32_t ssplit_out_xfer_count; ++ ++ /** ++ * Holds the number of bus errors that have occurred for a transaction ++ * within this transfer. ++ */ ++ uint8_t error_count; ++ ++ /** ++ * Index of the next frame descriptor for an isochronous transfer. A ++ * frame descriptor describes the buffer position and length of the ++ * data to be transferred in the next scheduled (micro)frame of an ++ * isochronous transfer. It also holds status for that transaction. ++ * The frame index starts at 0. ++ */ ++ uint16_t isoc_frame_index; ++ ++ /** Position of the ISOC split on full/low speed */ ++ uint8_t isoc_split_pos; ++ ++ /** Position of the ISOC split in the buffer for the current frame */ ++ uint16_t isoc_split_offset; ++ ++ /** URB for this transfer */ ++ struct dwc_otg_hcd_urb *urb; ++ ++ struct dwc_otg_qh *qh; ++ ++ /** This list of QTDs */ ++ DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry; ++ ++ /** Indicates if this QTD is currently processed by HW. */ ++ uint8_t in_process; ++ ++ /** Number of DMA descriptors for this QTD */ ++ uint8_t n_desc; ++ ++ /** ++ * Last activated frame(packet) index. ++ * Used in Descriptor DMA mode only. ++ */ ++ uint16_t isoc_frame_index_last; ++ ++} dwc_otg_qtd_t; ++ ++DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd); ++ ++/** ++ * A Queue Head (QH) holds the static characteristics of an endpoint and ++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may ++ * be entered in either the non-periodic or periodic schedule. ++ */ ++typedef struct dwc_otg_qh { ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - UE_CONTROL ++ * - UE_BULK ++ * - UE_INTERRUPT ++ * - UE_ISOCHRONOUS ++ */ ++ uint8_t ep_type; ++ uint8_t ep_is_in; ++ ++ /** wMaxPacketSize Field of Endpoint Descriptor. */ ++ uint16_t maxp; ++ ++ /** ++ * Device speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ uint8_t dev_speed; ++ ++ /** ++ * Determines the PID of the next data packet for non-control ++ * transfers. Ignored for control transfers.
++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Ping state if 1. */ ++ uint8_t ping_state; ++ ++ /** ++ * List of QTDs for this QH. ++ */ ++ struct dwc_otg_qtd_list qtd_list; ++ ++ /** Host channel currently processing transfers for this QH. */ ++ struct dwc_hc *channel; ++ ++ /** Full/low speed endpoint on high-speed hub requires split. */ ++ uint8_t do_split; ++ ++ /** @name Periodic schedule information */ ++ /** @{ */ ++ ++ /** Bandwidth in microseconds per (micro)frame. */ ++ uint16_t usecs; ++ ++ /** Interval between transfers in (micro)frames. */ ++ uint16_t interval; ++ ++ /** ++ * (micro)frame to initialize a periodic transfer. The transfer ++ * executes in the following (micro)frame. ++ */ ++ uint16_t sched_frame; ++ ++ /** (micro)frame at which last start split was initialized. */ ++ uint16_t start_split_frame; ++ ++ /** @} */ ++ ++ /** ++ * Used instead of original buffer if ++ * it(physical address) is not dword-aligned. ++ */ ++ uint8_t *dw_align_buf; ++ dwc_dma_t dw_align_buf_dma; ++ ++ /** Entry for QH in either the periodic or non-periodic schedule. */ ++ dwc_list_link_t qh_list_entry; ++ ++ /** @name Descriptor DMA support */ ++ /** @{ */ ++ ++ /** Descriptor List. */ ++ dwc_otg_host_dma_desc_t *desc_list; ++ ++ /** Descriptor List physical address. */ ++ dwc_dma_t desc_list_dma; ++ ++ /** ++ * Xfer Bytes array. ++ * Each element corresponds to a descriptor and indicates ++ * original XferSize size value for the descriptor. ++ */ ++ uint32_t *n_bytes; ++ ++ /** Actual number of transfer descriptors in a list. */ ++ uint16_t ntd; ++ ++ /** First activated isochronous transfer descriptor index. */ ++ uint8_t td_first; ++ /** Last activated isochronous transfer descriptor index. */ ++ uint8_t td_last; ++ ++ /** @} */ ++ ++} dwc_otg_qh_t; ++ ++DWC_CIRCLEQ_HEAD(hc_list, dwc_hc); ++ ++#ifdef HW2937_WORKAROUND ++ ++typedef enum { ++ HW2937_XFER_MODE_IDLE, ++ HW2937_XFER_MODE_IN, ++ HW2937_XFER_MODE_OUT, ++ HW2937_XFER_MODE_PAUSEIN /* Transitioning from IN to IDLE */ ++} hw2937_xfer_mode_t; ++#endif ++ ++/** ++ * This structure holds the state of the HCD, including the non-periodic and ++ * periodic schedules. ++ */ ++struct dwc_otg_hcd { ++ /** DWC OTG Core Interface Layer */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Function HCD driver callbacks */ ++ struct dwc_otg_hcd_function_ops *fops; ++ ++ /** Internal DWC HCD Flags */ ++ volatile union dwc_otg_hcd_internal_flags { ++ uint32_t d32; ++ struct { ++ unsigned port_connect_status_change:1; ++ unsigned port_connect_status:1; ++ unsigned port_reset_change:1; ++ unsigned port_enable_change:1; ++ unsigned port_suspend_change:1; ++ unsigned port_over_current_change:1; ++ unsigned port_l1_change:1; ++ unsigned reserved:26; ++ } b; ++ } flags; ++ ++ /** ++ * Inactive items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are not ++ * currently assigned to a host channel. ++ */ ++ dwc_list_link_t non_periodic_sched_inactive; ++ ++ /** ++ * Active items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are ++ * currently assigned to a host channel. ++ */ ++ dwc_list_link_t non_periodic_sched_active; ++ ++ /** ++ * Pointer to the next Queue Head to process in the active ++ * non-periodic schedule. ++ */ ++ dwc_list_link_t *non_periodic_qh_ptr; ++ ++ /** ++ * Inactive items in the periodic schedule. This is a list of QHs for ++ * periodic transfers that are _not_ scheduled for the next frame. ++ * Each QH in the list has an interval counter that determines when it ++ * needs to be scheduled for execution. This scheduling mechanism ++ * allows only a simple calculation for periodic bandwidth used (i.e. ++ * must assume that all periodic transfers may need to execute in the ++ * same frame). However, it greatly simplifies scheduling and should ++ * be sufficient for the vast majority of OTG hosts, which need to ++ * connect to a small number of peripherals at one time. ++ * ++ * Items move from this list to periodic_sched_ready when the QH ++ * interval counter is 0 at SOF. ++ */ ++ dwc_list_link_t periodic_sched_inactive; ++ ++ /** ++ * List of periodic QHs that are ready for execution in the next ++ * frame, but have not yet been assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_assigned as host ++ * channels become available during the current frame. ++ */ ++ dwc_list_link_t periodic_sched_ready; ++ ++ /** ++ * List of periodic QHs to be executed in the next frame that are ++ * assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_queued as the ++ * transactions for the QH are queued to the DWC_otg controller. ++ */ ++ dwc_list_link_t periodic_sched_assigned; ++ ++ /** ++ * List of periodic QHs that have been queued for execution. ++ * ++ * Items move from this list to either periodic_sched_inactive or ++ * periodic_sched_ready when the channel associated with the transfer ++ * is released. If the interval for the QH is 1, the item moves to ++ * periodic_sched_ready because it must be rescheduled for the next ++ * frame. Otherwise, the item moves to periodic_sched_inactive. ++ */ ++ dwc_list_link_t periodic_sched_queued; ++ ++ /** ++ * Total bandwidth claimed so far for periodic transfers. This value ++ * is in microseconds per (micro)frame. The assumption is that all ++ * periodic transfers may occur in the same (micro)frame. ++ */ ++ uint16_t periodic_usecs; ++ ++ /** ++ * Frame number read from the core at SOF. The value ranges from 0 to ++ * DWC_HFNUM_MAX_FRNUM. ++ */ ++ uint16_t frame_number; ++ ++ /** ++ * Free host channels in the controller. This is a list of ++ * dwc_hc_t items. ++ */ ++ struct hc_list free_hc_list; ++ /** ++ * Number of host channels assigned to periodic transfers. Currently ++ * assuming that there is a dedicated host channel for each periodic ++ * transaction and at least one host channel available for ++ * non-periodic transactions. ++ */ ++ int periodic_channels; ++ ++ /** ++ * Number of host channels assigned to non-periodic transfers. ++ */ ++ int non_periodic_channels; ++ ++ /** ++ * Array of pointers to the host channel descriptors. Allows accessing ++ * a host channel descriptor given the host channel number. This is ++ * useful in interrupt handlers. ++ */ ++ struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS]; ++ ++ /** ++ * Buffer to use for any data received during the status phase of a ++ * control transfer. Normally no data is transferred during the status ++ * phase. This buffer is used as a bit bucket. ++ */ ++ uint8_t *status_buf; ++ ++ /** ++ * DMA address for status_buf. ++ */ ++ dma_addr_t status_buf_dma; ++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 ++ ++ /** ++ * Connection timer. An OTG host must display a message if the device ++ * does not connect. Started when the VBus power is turned on via ++ * sysfs attribute "buspower". ++ */ ++ dwc_timer_t *conn_timer; ++ ++ /* Tasket to do a reset */ ++ dwc_tasklet_t *reset_tasklet; ++ ++ /* */ ++ dwc_spinlock_t *lock; ++ ++ /** ++ * Private data that could be used by OS wrapper. ++ */ ++ void *priv; ++ ++ uint8_t otg_port; ++ ++ /** Frame List */ ++ uint32_t *frame_list; ++ ++ /** Frame List DMA address */ ++ dma_addr_t frame_list_dma; ++ ++#ifdef HW2937_WORKAROUND ++ /** Current transfer mode (IN, OUT, or IDLE) */ ++ hw2937_xfer_mode_t hw2937_xfer_mode; ++ ++ /** Mask of channels assigned to the current mode */ ++ uint32_t hw2937_assigned_channels; ++#endif ++ ++#ifdef DEBUG ++ uint32_t frrem_samples; ++ uint64_t frrem_accum; ++ ++ uint32_t hfnum_7_samples_a; ++ uint64_t hfnum_7_frrem_accum_a; ++ uint32_t hfnum_0_samples_a; ++ uint64_t hfnum_0_frrem_accum_a; ++ uint32_t hfnum_other_samples_a; ++ uint64_t hfnum_other_frrem_accum_a; ++ ++ uint32_t hfnum_7_samples_b; ++ uint64_t hfnum_7_frrem_accum_b; ++ uint32_t hfnum_0_samples_b; ++ uint64_t hfnum_0_frrem_accum_b; ++ uint32_t hfnum_other_samples_b; ++ uint64_t hfnum_other_frrem_accum_b; ++#endif ++}; ++ ++/** @name Transaction Execution Functions */ ++/** @{ */ ++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t ++ * hcd); ++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, ++ dwc_otg_transaction_type_e tr_type); ++ ++/** @} */ ++ ++/** @name Interrupt Handler Functions */ ++/** @{ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint32_t num); ++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++/** @} */ ++ ++/** @name Schedule Queue Functions */ ++/** @{ */ ++ ++/* Implemented in dwc_otg_hcd_queue.c */ ++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * urb); ++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ int sched_csplit); ++ ++/** Remove and free a QH */ ++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd, ++ dwc_otg_qh_t * qh) ++{ ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ dwc_otg_hcd_qh_free(hcd, qh); ++} ++ ++/** Allocates memory for a QH structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void) ++{ ++ return (dwc_otg_qh_t *) dwc_alloc_atomic(sizeof(dwc_otg_qh_t)); ++} ++ ++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb); ++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb); ++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_qh_t ** qh); ++ ++/** Allocates memory for a QTD structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void) ++{ ++ return (dwc_otg_qtd_t *) dwc_alloc_atomic(sizeof(dwc_otg_qtd_t)); ++} ++ ++/** Frees the memory for a QTD structure. QTD should already be removed from ++ * list. ++ * @param qtd QTD to free.*/ ++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd) ++{ ++ dwc_free(qtd); ++} ++ ++/** Removes a QTD from list. ++ * @param hcd HCD instance. ++ * @param qtd QTD to remove from list. ++ * @param qh QTD belongs to. ++ */ ++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_qh_t * qh) ++{ ++ uint64_t flags; ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++} ++ ++/** Remove and free a QTD */ ++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_qh_t * qh) ++{ ++ dwc_otg_hcd_qtd_remove(hcd, qtd, qh); ++ dwc_otg_hcd_qtd_free(qtd); ++} ++ ++/** @} */ ++ ++/** @name Descriptor DMA Supporting Functions */ ++/** @{ */ ++ ++extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status); ++ ++extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++ ++/** @} */ ++ ++/** @name Internal Functions */ ++/** @{ */ ++dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb); ++/** @} */ ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, ++ uint8_t devaddr); ++extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd); ++#endif ++ ++/** Gets the QH that contains the list_head */ ++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry) ++ ++/** Gets the QTD that contains the list_head */ ++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry) ++ ++/** Check if QH is non-periodic */ ++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \ ++ (_qh_ptr_->ep_type == UE_CONTROL)) ++ ++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ ++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) ++ ++/** Packet size for any kind of endpoint descriptor */ ++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) ++ ++/** ++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is ++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the ++ * frame number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2) ++{ ++ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <= ++ (DWC_HFNUM_MAX_FRNUM >> 1); ++} ++ ++/** ++ * Returns true if _frame1 is greater than _frame2. The comparison is done ++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame ++ * number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2) ++{ ++ return (frame1 != frame2) && ++ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) < ++ (DWC_HFNUM_MAX_FRNUM >> 1)); ++} ++ ++/** ++ * Increments _frame by the amount specified by _inc. The addition is done ++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. ++ */ ++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc) ++{ ++ return (frame + inc) & DWC_HFNUM_MAX_FRNUM; ++} ++ ++static inline uint16_t dwc_full_frame_num(uint16_t frame) ++{ ++ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3; ++} ++ ++static inline uint16_t dwc_micro_frame_num(uint16_t frame) ++{ ++ return frame & 0x7; ++} ++ ++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd); ++ ++#ifdef DEBUG ++/** ++ * Macro to sample the remaining PHY clocks left in the current frame. This ++ * may be used during debugging to determine the average time it takes to ++ * execute sections of code. There are two possible sample points, "a" and ++ * "b", so the _letter argument must be one of these values. ++ * ++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For ++ * example, "cat /sys/devices/lm0/hcd_frrem". ++ */ ++#define dwc_sample_frrem(_hcd, _qh, _letter) \ ++{ \ ++ hfnum_data_t hfnum; \ ++ dwc_otg_qtd_t *qtd; \ ++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ ++ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ ++ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ ++ switch (hfnum.b.frnum & 0x7) { \ ++ case 7: \ ++ _hcd->hfnum_7_samples_##_letter++; \ ++ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ case 0: \ ++ _hcd->hfnum_0_samples_##_letter++; \ ++ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ default: \ ++ _hcd->hfnum_other_samples_##_letter++; \ ++ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ } \ ++ } \ ++} ++#else ++#define dwc_sample_frrem(_hcd, _qh, _letter) ++#endif ++#endif ++#endif /* DWC_DEVICE_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,393 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $ ++ * $Revision: #6 $ ++ * $Date: 2009/04/21 $ ++ * $Change: 1237474 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_IF_H__ ++#define __DWC_HCD_IF_H__ ++ ++#include "dwc_otg_core_if.h" ++ ++/** @file ++ * This file defines DWC_OTG HCD Core API. ++ */ ++ ++struct dwc_otg_hcd; ++typedef struct dwc_otg_hcd dwc_otg_hcd_t; ++ ++struct dwc_otg_hcd_urb; ++typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t; ++ ++/** @name HCD Function Driver Callbacks */ ++/** @{ */ ++ ++/** This function is called whenever core switches to host mode. */ ++typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd); ++ ++/** This function is called when device has been disconnected */ ++typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd); ++ ++/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */ ++typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle, ++ uint32_t * hub_addr, ++ uint32_t * port_addr); ++/** Via this function HCD core gets device speed */ ++typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle); ++ ++/** This function is called when urb is completed */ ++typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int32_t status); ++ ++/** Via this function HCD core gets b_hnp_enable parameter */ ++typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd); ++ ++struct dwc_otg_hcd_function_ops { ++ dwc_otg_hcd_start_cb_t start; ++ dwc_otg_hcd_disconnect_cb_t disconnect; ++ dwc_otg_hcd_hub_info_from_urb_cb_t hub_info; ++ dwc_otg_hcd_speed_from_urb_cb_t speed; ++ dwc_otg_hcd_complete_urb_cb_t complete; ++ dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable; ++}; ++/** @} */ ++ ++/** @name HCD Core API */ ++/** @{ */ ++/** This function allocates dwc_otg_hcd structure and returns pointer on it. */ ++extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void); ++ ++/** This function should be called to initiate HCD Core. ++ * ++ * @param hcd The HCD ++ * @param core_if The DWC_OTG Core ++ * ++ * Returns -DWC_E_NO_MEMORY if no enough memory. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if); ++ ++/** Frees HCD ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd); ++ ++/** This function should be called on every hardware interrupt. ++ * ++ * @param dwc_otg_hcd The HCD ++ * ++ * Returns non zero if interrupt is handled ++ * Return 0 if interrupt is not handled ++ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++ ++/** ++ * Returns private data set by ++ * dwc_otg_hcd_set_priv_data function. ++ * ++ * @param hcd The HCD ++ */ ++extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Set private data. ++ * ++ * @param hcd The HCD ++ * @param priv_data pointer to be stored in private data ++ */ ++extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data); ++ ++/** ++ * This function initializes the HCD Core. ++ * ++ * @param hcd The HCD ++ * @param fops The Function Driver Operations data structure containing pointers to all callbacks. ++ * ++ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, ++ struct dwc_otg_hcd_function_ops *fops); ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Handles hub class-specific requests. ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param typeReq Request Type ++ * @param wValue wValue from control request ++ * @param wIndex wIndex from control request ++ * @param buf data buffer ++ * @param wLength data buffer length ++ * ++ * Returns -DWC_E_INVALID if invalid argument is passed ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint16_t typeReq, uint16_t wValue, ++ uint16_t wIndex, uint8_t * buf, ++ uint16_t wLength); ++ ++/** ++ * Returns otg port number. ++ * ++ * @param hcd The HCD ++ */ ++extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Returns 1 if currently core is acting as B host, and 0 otherwise. ++ * ++ * @param hcd The HCD ++ */ ++extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Returns current frame number. ++ * ++ * @param hcd The HCD ++ */ ++extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Dumps hcd state. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ * Currently this function is not implemented. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Sends LPM transaction to the local device. ++ * ++ * @param hcd The HCD ++ * @param devaddr Device Address ++ * @param hird Host initiated resume duration ++ * @param bRemoteWake Value of bRemoteWake field in LPM transaction ++ * ++ * Returns negative value if sending LPM transaction was not succeeded. ++ * Returns 0 on success. ++ */ ++extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, ++ uint8_t hird, uint8_t bRemoteWake); ++ ++/* URB interface */ ++ ++/** ++ * Allocates memory for dwc_otg_hcd_urb structure. ++ * Allocated memory should be freed by call dwc_free function. ++ * ++ * @param hcd The HCD ++ * @param iso_desc_count Count of ISOC descriptors ++ * @param atomic_alloc Specefies whether to perform atomic allocation. ++ */ ++extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, ++ int iso_desc_count, ++ int atomic_alloc); ++ ++/** ++ * Set pipe information in URB. ++ * ++ * @param hcd_urb DWC_OTG URB ++ * @param devaddr Device Address ++ * @param ep_num Endpoint Number ++ * @param ep_type Endpoint Type ++ * @param ep_dir Endpoint Direction ++ * @param mps Max Packet Size ++ */ ++extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb, ++ uint8_t devaddr, uint8_t ep_num, ++ uint8_t ep_type, uint8_t ep_dir, ++ uint16_t mps); ++ ++/* Transfer flags */ ++#define URB_GIVEBACK_ASAP 0x1 ++#define URB_SEND_ZERO_PACKET 0x2 ++ ++/** ++ * Sets dwc_otg_hcd_urb parameters. ++ * ++ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function. ++ * @param urb_handle Unique handle for request, this will be passed back ++ * to function driver in completion callback. ++ * @param buf The buffer for the data ++ * @param dma The DMA buffer for the data ++ * @param buflen Transfer length ++ * @param sp Buffer for setup data ++ * @param sp_dma DMA address of setup data buffer ++ * @param flags Transfer flags ++ * @param interval Polling interval for interrupt or isochronous transfers. ++ */ ++extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb, ++ void *urb_handle, void *buf, ++ dwc_dma_t dma, uint32_t buflen, void *sp, ++ dwc_dma_t sp_dma, uint32_t flags, ++ uint16_t interval); ++ ++/** Gets status from dwc_otg_hcd_urb ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb); ++ ++/** Gets actual length from dwc_otg_hcd_urb ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb); ++ ++/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * ++ dwc_otg_urb); ++ ++/** Set ISOC descriptor offset and length ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ * @param offset Offset from beginig of buffer. ++ * @param length Transaction length ++ */ ++extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num, uint32_t offset, ++ uint32_t length); ++ ++/** Get status of ISOC descriptor, specified by desc_num ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, int desc_num); ++ ++/** Get actual length of ISOC descriptor, specified by desc_num ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, ++ int desc_num); ++ ++/** Queue URB. After transfer is completes, the complete callback will be called with the URB status ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param ep_handle Out parameter for returning endpoint handle ++ * ++ * Returns -DWC_E_NO_DEVICE if no device is connected. ++ * Returns -DWC_E_NO_MEMORY if there is no enough memory. ++ * Returns 0 on success. ++ */ ++extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, ++ void **ep_handle); ++ ++/** De-queue the specified URB ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb); ++ ++/** Frees resources in the DWC_otg controller related to a given endpoint. ++ * Any URBs for the endpoint must already be dequeued. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function ++ * @param retry Number of retries if there are queued transfers. ++ * ++ * Returns -DWC_E_INVALID if invalid arguments are passed. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, ++ int retry); ++ ++/** Returns 1 if status of specified port is changed and 0 otherwise. ++ * ++ * @param hcd The HCD ++ * @param port Port number ++ */ ++extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port); ++ ++/** Call this function to check if bandwidth was allocated for specified endpoint. ++ * Only for ISOC and INTERRUPT endpoints. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, ++ void *ep_handle); ++ ++/** Call this function to check if bandwidth was freed for specified endpoint. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle); ++ ++/** Returns bandwidth allocated for specified endpoint in microseconds. ++ * Only for ISOC and INTERRUPT endpoints. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, ++ void *ep_handle); ++ ++/** @} */ ++ ++#endif /* __DWC_HCD_IF_H__ */ ++#endif /* DWC_DEVICE_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,2065 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ ++ * $Revision: #77 $ ++ * $Date: 2009/04/21 $ ++ * $Change: 1237475 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++/** @file ++ * This file contains the implementation of the HCD Interrupt handlers. ++ */ ++ ++/** This function handles interrupts for the HCD. */ ++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int retval = 0; ++ ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ gintsts_data_t gintsts; ++#ifdef DEBUG ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ ++ //GRAYG: debugging ++ if (NULL == global_regs) { ++ DWC_DEBUGPL(DBG_HCD, "**** NULL regs: dwc_otg_hcd=%p " ++ "core_if=%p\n", ++ dwc_otg_hcd, global_regs); ++ return retval; ++ } ++#endif ++ ++ /* Check if HOST Mode */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ gintsts.d32 = dwc_otg_read_core_intr(core_if); ++ if (!gintsts.d32) { ++ return 0; ++ } ++#ifdef DEBUG ++ /* Don't print debug message in the interrupt handler on SOF */ ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCD, "\n"); ++#endif ++ ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n", ++ gintsts.d32, core_if); ++#endif ++ ++ if (gintsts.b.sofintr) { ++ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.rxstsqlvl) { ++ retval |= ++ dwc_otg_hcd_handle_rx_status_q_level_intr ++ (dwc_otg_hcd); ++ } ++ if (gintsts.b.nptxfempty) { ++ retval |= ++ dwc_otg_hcd_handle_np_tx_fifo_empty_intr ++ (dwc_otg_hcd); ++ } ++ if (gintsts.b.i2cintr) { ++ /** @todo Implement i2cintr handler. */ ++ } ++ if (gintsts.b.portintr) { ++ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.hcintr) { ++ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.ptxfempty) { ++ retval |= ++ dwc_otg_hcd_handle_perio_tx_fifo_empty_intr ++ (dwc_otg_hcd); ++ } ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ { ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD Finished Servicing Interrupts\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", ++ dwc_read_reg32(&global_regs->gintsts)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", ++ dwc_read_reg32(&global_regs->gintmsk)); ++ } ++#endif ++ ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCD, "\n"); ++#endif ++ ++ } ++ ++ return retval; ++} ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++#warning Compiling code to track missed SOFs ++#define FRAME_NUM_ARRAY_SIZE 1000 ++/** ++ * This function is for debug only. ++ */ ++static inline void track_missed_sofs(uint16_t curr_frame_number) ++{ ++ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static int frame_num_idx = 0; ++ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; ++ static int dumped_frame_num_array = 0; ++ ++ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { ++ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != ++ curr_frame_number) { ++ frame_num_array[frame_num_idx] = curr_frame_number; ++ last_frame_num_array[frame_num_idx++] = last_frame_num; ++ } ++ } else if (!dumped_frame_num_array) { ++ int i; ++ DWC_PRINTF("Frame Last Frame\n"); ++ DWC_PRINTF("----- ----------\n"); ++ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { ++ DWC_PRINTF("0x%04x 0x%04x\n", ++ frame_num_array[i], last_frame_num_array[i]); ++ } ++ dumped_frame_num_array = 1; ++ } ++ last_frame_num = curr_frame_number; ++} ++#endif ++ ++/** ++ * Handles the start-of-frame interrupt in host mode. Non-periodic ++ * transactions may be queued to the DWC_otg controller for the current ++ * (micro)frame. Periodic transactions may be queued to the controller for the ++ * next (micro)frame. ++ */ ++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd) ++{ ++ hfnum_data_t hfnum; ++ dwc_list_link_t *qh_entry; ++ dwc_otg_qh_t *qh; ++ dwc_otg_transaction_type_e tr_type; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ ++ hfnum.d32 = ++ dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); ++#endif ++ hcd->frame_number = hfnum.b.frnum; ++ ++#ifdef DEBUG ++ hcd->frrem_accum += hfnum.b.frrem; ++ hcd->frrem_samples++; ++#endif ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++ track_missed_sofs(hcd->frame_number); ++#endif ++ /* Determine whether any periodic QHs should be executed. */ ++ qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive); ++ while (qh_entry != &hcd->periodic_sched_inactive) { ++ qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry); ++ qh_entry = qh_entry->next; ++ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) { ++ /* ++ * Move QH to the ready list to be executed next ++ * (micro)frame. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, ++ &qh->qh_list_entry); ++ } ++ } ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++ ++ /* Clear interrupt */ ++ gintsts.b.sofintr = 1; ++ dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at ++ * least one packet in the Rx FIFO. The packets are moved from the FIFO to ++ * memory if the DWC_otg controller is operating in Slave mode. */ ++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ host_grxsts_data_t grxsts; ++ dwc_hc_t *hc = NULL; ++ ++ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); ++ ++ grxsts.d32 = ++ dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; ++ ++ /* Packet Status */ ++ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); ++ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); ++ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, ++ hc->data_pid_start); ++ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer. */ ++ if (grxsts.b.bcnt > 0) { ++ dwc_otg_read_packet(dwc_otg_hcd->core_if, ++ hc->xfer_buff, grxsts.b.bcnt); ++ ++ /* Update the HC fields for the next packet received. */ ++ hc->xfer_count += grxsts.b.bcnt; ++ hc->xfer_buff += grxsts.b.bcnt; ++ } ++ ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: ++ case DWC_GRXSTS_PKTSTS_CH_HALTED: ++ /* Handled in interrupt, just ignore data */ ++ break; ++ default: ++ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", ++ grxsts.b.pktsts); ++ break; ++ } ++ ++ return 1; ++} ++ ++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More ++ * data packets may be written to the FIFO for OUT transfers. More requests ++ * may be written to the non-periodic request queue for IN transfers. This ++ * interrupt is enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_NON_PERIODIC); ++ return 1; ++} ++ ++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data ++ * packets may be written to the FIFO for OUT transfers. More requests may be ++ * written to the periodic request queue for IN transfers. This interrupt is ++ * enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_PERIODIC); ++ return 1; ++} ++ ++/** There are multiple conditions that can cause a port interrupt. This function ++ * determines which interrupt conditions have occurred and handles them ++ * appropriately. */ ++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int retval = 0; ++ hprt0_data_t hprt0; ++ hprt0_data_t hprt0_modify; ++ ++ hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0); ++ hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0); ++ ++ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in ++ * GINTSTS */ ++ ++ hprt0_modify.b.prtena = 0; ++ hprt0_modify.b.prtconndet = 0; ++ hprt0_modify.b.prtenchng = 0; ++ hprt0_modify.b.prtovrcurrchng = 0; ++ ++ /* Port Connect Detected ++ * Set flag and clear if detected */ ++ if (hprt0.b.prtconndet) { ++ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " ++ "Port Connect Detected--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 1; ++ hprt0_modify.b.prtconndet = 1; ++ ++ /* B-Device has connected, Delete the connection timer. */ ++ DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer); ++ ++ /* The Hub driver asserts a reset when it sees port connect ++ * status change flag */ ++ retval |= 1; ++ } ++ ++ /* Port Enable Changed ++ * Clear if detected - Set internal flag if disabled */ ++ if (hprt0.b.prtenchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Enable Changed--\n", hprt0.d32); ++ hprt0_modify.b.prtenchng = 1; ++ if (hprt0.b.prtena == 1) { ++ int do_reset = 0; ++ dwc_otg_core_params_t *params = ++ dwc_otg_hcd->core_if->core_params; ++ dwc_otg_core_global_regs_t *global_regs = ++ dwc_otg_hcd->core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = ++ dwc_otg_hcd->core_if->host_if; ++ ++ /* Check if we need to adjust the PHY clock speed for ++ * low power and adjust it */ ++ if (params->host_support_fs_ls_low_power) { ++ gusbcfg_data_t usbcfg; ++ ++ usbcfg.d32 = ++ dwc_read_reg32(&global_regs->gusbcfg); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ++ || hprt0.b.prtspd == ++ DWC_HPRT0_PRTSPD_FULL_SPEED) { ++ /* ++ * Low power ++ */ ++ hcfg_data_t hcfg; ++ if (usbcfg.b.phylpwrclksel == 0) { ++ /* Set PHY low power clock select for FS/LS devices */ ++ usbcfg.b.phylpwrclksel = 1; ++ dwc_write_reg32(&global_regs-> ++ gusbcfg, ++ usbcfg.d32); ++ do_reset = 1; ++ } ++ ++ hcfg.d32 = ++ dwc_read_reg32(&host_if-> ++ host_global_regs->hcfg); ++ ++ if (hprt0.b.prtspd == ++ DWC_HPRT0_PRTSPD_LOW_SPEED ++ && params-> ++ host_ls_low_power_phy_clk == ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) ++ { ++ /* 6 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, ++ "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); ++ if (hcfg.b.fslspclksel != ++ DWC_HCFG_6_MHZ) { ++ hcfg.b.fslspclksel = ++ DWC_HCFG_6_MHZ; ++ dwc_write_reg32 ++ (&host_if-> ++ host_global_regs-> ++ hcfg, hcfg.d32); ++ do_reset = 1; ++ } ++ } else { ++ /* 48 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, ++ "FS_PHY programming HCFG to 48 MHz ()\n"); ++ if (hcfg.b.fslspclksel != ++ DWC_HCFG_48_MHZ) { ++ hcfg.b.fslspclksel = ++ DWC_HCFG_48_MHZ; ++ dwc_write_reg32 ++ (&host_if-> ++ host_global_regs-> ++ hcfg, hcfg.d32); ++ do_reset = 1; ++ } ++ } ++ } else { ++ /* ++ * Not low power ++ */ ++ if (usbcfg.b.phylpwrclksel == 1) { ++ usbcfg.b.phylpwrclksel = 0; ++ dwc_write_reg32(&global_regs-> ++ gusbcfg, ++ usbcfg.d32); ++ do_reset = 1; ++ } ++ } ++ ++ if (do_reset) { ++ DWC_TASK_SCHEDULE(dwc_otg_hcd-> ++ reset_tasklet); ++ } ++ } ++ ++ if (!do_reset) { ++ /* Port has been enabled set the reset change flag */ ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++ } ++ } else { ++ dwc_otg_hcd->flags.b.port_enable_change = 1; ++ } ++ retval |= 1; ++ } ++ ++ /** Overcurrent Change Interrupt */ ++ if (hprt0.b.prtovrcurrchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Overcurrent Changed--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_over_current_change = 1; ++ hprt0_modify.b.prtovrcurrchng = 1; ++ retval |= 1; ++ } ++ ++ /* Clear Port Interrupts */ ++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); ++ ++ return retval; ++} ++ ++/** This interrupt indicates that one or more host channels has a pending ++ * interrupt. There are multiple conditions that can cause each host channel ++ * interrupt. This function determines which conditions have occurred for each ++ * host channel interrupt and handles them appropriately. */ ++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int i; ++ int retval = 0; ++ haint_data_t haint; ++ ++ /* Clear appropriate bits in HCINTn to clear the interrupt bit in ++ * GINTSTS */ ++ ++ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if); ++ ++ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) { ++ if (haint.b2.chint & (1 << i)) { ++ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i); ++ } ++ } ++ ++ return retval; ++} ++ ++ ++ ++/** ++ * Gets the actual length of a transfer after the transfer halts. _halt_status ++ * holds the reason for the halt. ++ * ++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE, ++ * *short_read is set to 1 upon return if less than the requested ++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon ++ * return. short_read may also be NULL on entry, in which case it remains ++ * unchanged. ++ */ ++static uint32_t get_actual_xfer_length(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status, ++ int *short_read) ++{ ++ hctsiz_data_t hctsiz; ++ uint32_t length; ++ ++ if (short_read != NULL) { ++ *short_read = 0; ++ } ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ if (hc->ep_is_in) { ++ length = hc->xfer_len - hctsiz.b.xfersize; ++ if (short_read != NULL) { ++ *short_read = (hctsiz.b.xfersize != 0); ++ } ++ } else if (hc->qh->do_split) { ++ length = qtd->ssplit_out_xfer_count; ++ } else { ++ length = hc->xfer_len; ++ } ++ } else { ++ /* ++ * Must use the hctsiz.pktcnt field to determine how much data ++ * has been transferred. This field reflects the number of ++ * packets that have been transferred via the USB. This is ++ * always an integral number of packets if the transfer was ++ * halted before its normal completion. (Can't use the ++ * hctsiz.xfersize field because that reflects the number of ++ * bytes transferred via the AHB, not the USB). ++ */ ++ length = ++ (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet; ++ } ++ ++ return length; ++} ++ ++/** ++ * Updates the state of the URB after a Transfer Complete interrupt on the ++ * host channel. Updates the actual_length field of the URB based on the ++ * number of bytes transferred via the host channel. Sets the URB status ++ * if the data transfer is finished. ++ * ++ * @return 1 if the data transfer specified by the URB is completely finished, ++ * 0 otherwise. ++ */ ++static int update_urb_state_xfer_comp(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_hcd_urb_t * urb, ++ dwc_otg_qtd_t * qtd) ++{ ++ int xfer_done = 0; ++ int short_read = 0; ++ ++ int xfer_length; ++ ++ xfer_length = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, ++ &short_read); ++ ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && xfer_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, xfer_length); ++ } ++ ++ urb->actual_length += xfer_length; ++ ++ if(xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) && ++ (urb->flags & URB_SEND_ZERO_PACKET) && (urb->actual_length == urb->length) && ++ !(urb->length % hc->max_packet)) { ++ xfer_done = 0; ++ } else if (short_read || urb->actual_length == urb->length) { ++ xfer_done = 1; ++ urb->status = 0; ++ } ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), ++ hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", ++ hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", ++ urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", ++ short_read, xfer_done); ++ } ++#endif ++ ++ return xfer_done; ++} ++ ++/* ++ * Save the starting data toggle for the next transfer. The data toggle is ++ * saved in the QH for non-control transfers and it's saved in the QTD for ++ * control transfers. ++ */ ++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd) ++{ ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { ++ dwc_otg_qh_t *qh = hc->qh; ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } else { ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } ++} ++ ++/** ++ * Updates the state of an Isochronous URB when the transfer is stopped for ++ * any reason. The fields of the current entry in the frame descriptor array ++ * are set based on the transfer state and the input _halt_status. Completes ++ * the Isochronous URB if all the URB frames have been completed. ++ * ++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be ++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. ++ */ ++static dwc_otg_halt_status_e ++update_isoc_urb_state(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ dwc_otg_halt_status_e ret_val = halt_status; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_COMPLETE: ++ frame_desc->status = 0; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ } ++ ++ break; ++ case DWC_OTG_HC_XFER_FRAME_OVERRUN: ++ urb->error_count++; ++ if (hc->ep_is_in) { ++ frame_desc->status = -DWC_E_NO_STREAM_RES; ++ } else { ++ frame_desc->status = -DWC_E_COMMUNICATION; ++ } ++ frame_desc->actual_length = 0; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ urb->error_count++; ++ frame_desc->status = -DWC_E_OVERFLOW; ++ /* Don't need to update actual_length in this case. */ ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ urb->error_count++; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ } ++ /* Skip whole frame */ ++ if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && ++ hc->ep_is_in && hcd->core_if->dma_enable) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ } ++ ++ break; ++ default: ++ DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status); ++ break; ++ } ++ if (++qtd->isoc_frame_index == urb->packet_count) { ++ /* ++ * urb->status is not used for isoc transfers. ++ * The individual frame_desc statuses are used instead. ++ */ ++ hcd->fops->complete(hcd, urb->priv, urb, 0); ++ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ ret_val = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ return ret_val; ++} ++ ++/** ++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic ++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are ++ * still linked to the QH, the QH is added to the end of the inactive ++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic ++ * schedule if no more QTDs are linked to the QH. ++ */ ++static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd) ++{ ++ int continue_split = 0; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); ++ ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ if (qtd->complete_split) { ++ continue_split = 1; ++ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID || ++ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) { ++ continue_split = 1; ++ } ++ ++ if (free_qtd) { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ continue_split = 0; ++ } ++ ++ qh->channel = NULL; ++ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); ++} ++ ++/** ++ * Releases a host channel for use by other transfers. Attempts to select and ++ * queue more transactions since at least one host channel is available. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc The host channel to release. ++ * @param qtd The QTD associated with the host channel. This QTD may be freed ++ * if the transfer is complete or an error has occurred. ++ * @param halt_status Reason the channel is being released. This status ++ * determines the actions taken by this function. ++ */ ++static void release_channel(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_transaction_type_e tr_type; ++ int free_qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d, xfer_len %d\n", ++ __func__, hc->hc_num, halt_status, hc->xfer_len); ++ ++#ifdef HW2937_WORKAROUND ++ if (hcd->hw2937_assigned_channels & (1<hc_num)) ++ { ++ if ((hcd->hw2937_assigned_channels &= ~(1<hc_num)) == 0) ++ hcd->hw2937_xfer_mode = HW2937_XFER_MODE_IDLE; ++ DWC_DEBUGPL(DBG_HW2937, " release %d, hw2937_ac -> %x\n", hc->hc_num, hcd->hw2937_assigned_channels); ++ } ++ else ++ { ++ DWC_DEBUGPL(DBG_ANY, " Unexpected release %d (hw2937_ac = %x)\n", hc->hc_num, hcd->hw2937_assigned_channels); ++ } ++#endif ++ ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_URB_COMPLETE: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_AHB_ERR: ++ case DWC_OTG_HC_XFER_STALL: ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ if (qtd->error_count >= 3) { ++ DWC_DEBUGPL(DBG_HCDV, ++ " Complete URB with transaction error\n"); ++ free_qtd = 1; ++ qtd->urb->status = -DWC_E_PROTOCOL; ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_PROTOCOL); ++ } else { ++ free_qtd = 0; ++ } ++ break; ++ case DWC_OTG_HC_XFER_URB_DEQUEUE: ++ /* ++ * The QTD has already been removed and the QH has been ++ * deactivated. Don't want to do anything except release the ++ * host channel and try to queue more transfers. ++ */ ++ goto cleanup; ++ case DWC_OTG_HC_XFER_NO_HALT_STATUS: ++ free_qtd = 0; ++ break; ++ default: ++ free_qtd = 0; ++ break; ++ } ++ ++ deactivate_qh(hcd, hc->qh, free_qtd); ++ ++ cleanup: ++ /* ++ * Release the host channel for use by other transfers. The cleanup ++ * function clears the channel interrupt enables and conditions, so ++ * there's no need to clear the Channel Halted interrupt separately. ++ */ ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hcd->non_periodic_channels--; ++ break; ++ ++ default: ++ /* ++ * Don't release reservations for periodic channels here. ++ * That's done when a periodic transfer is descheduled (i.e. ++ * when the QH is removed from the periodic schedule). ++ */ ++ break; ++ } ++ ++ /* Try to queue more transfers now that there's a free channel. */ ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++} ++ ++ ++/** ++ * Halts a host channel. If the channel cannot be halted immediately because ++ * the request queue is full, this function ensures that the FIFO empty ++ * interrupt for the appropriate queue is enabled so that the halt request can ++ * be queued when there is space in the request queue. ++ * ++ * This function may also be called in DMA mode. In that case, the channel is ++ * simply released since the core always halts the channel automatically in ++ * DMA mode. ++ */ ++static void halt_channel(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) ++{ ++ if (hcd->core_if->dma_enable) { ++ release_channel(hcd, hc, qtd, halt_status); ++ return; ++ } ++ ++ /* Slave mode processing... */ ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ ++ if (hc->halt_on_queue) { ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ dwc_otg_core_global_regs_t *global_regs; ++ global_regs = hcd->core_if->core_global_regs; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ /* ++ * Make sure the Non-periodic Tx FIFO empty interrupt ++ * is enabled so that the non-periodic schedule will ++ * be processed. ++ */ ++ gintmsk.b.nptxfempty = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } else { ++ /* ++ * Move the QH from the periodic queued schedule to ++ * the periodic assigned schedule. This allows the ++ * halt to be queued when the periodic schedule is ++ * processed. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &hc->qh->qh_list_entry); ++ ++ /* ++ * Make sure the Periodic Tx FIFO Empty interrupt is ++ * enabled so that the periodic schedule will be ++ * processed. ++ */ ++ gintmsk.b.ptxfempty = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } ++} ++ ++/** ++ * Performs common cleanup for non-periodic transfers after a Transfer ++ * Complete interrupt. This function should be called after any endpoint type ++ * specific handling is finished to release the host channel. ++ */ ++static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hcint_data_t hcint; ++ ++ qtd->error_count = 0; ++ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. This ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ hc->qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ /* ++ * Always halt and release the host channel to make it available for ++ * more transfers. There may still be more phases for a control ++ * transfer or more data packets for a bulk transfer at this point, ++ * but the host channel is still halted. A channel will be reassigned ++ * to the transfer when the non-periodic schedule is processed after ++ * the channel is released. This allows transactions to be queued ++ * properly via dwc_otg_hcd_queue_transactions, which also enables the ++ * Tx FIFO Empty interrupt if necessary. ++ */ ++ if (hc->ep_is_in) { ++ /* ++ * IN transfers in Slave mode require an explicit disable to ++ * halt the channel. (In DMA mode, this call simply releases ++ * the channel.) ++ */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* ++ * The channel is automatically disabled by the core for OUT ++ * transfers in Slave mode. ++ */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++/** ++ * Performs common cleanup for periodic transfers after a Transfer Complete ++ * interrupt. This function should be called after any endpoint type specific ++ * handling is finished to release the host channel. ++ */ ++static void complete_periodic_xfer(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hctsiz_data_t hctsiz; ++ qtd->error_count = 0; ++ ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) { ++ /* Core halts channel in these cases. */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* Flush any outstanding requests from the Tx queue. */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ uint32_t len; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ ++ len = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, ++ NULL); ++ ++ if (!len) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ return 0; ++ } ++ frame_desc->actual_length += len; ++ ++ if (hc->align_buff && len) ++ dwc_memcpy(qtd->urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, ++ len); ++ qtd->isoc_split_offset += len; ++ ++ if (frame_desc->length == frame_desc->actual_length) { ++ frame_desc->status = 0; ++ qtd->isoc_frame_index++; ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ } ++ ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ ++ return 1; /* Indicates that channel released */ ++} ++/** ++ * Handles a host channel Transfer Complete interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ int urb_xfer_done; ++ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Transfer Complete--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ if (pipe_type == UE_ISOCHRONOUS) { ++ /* Do not disable the interrupt, just clear it */ ++ clear_hc_int(hc_regs, xfercomp); ++ return 1; ++ } ++ goto handle_xfercomp_done; ++ } ++ ++ /* ++ * Handle xfer complete on CSPLIT. ++ */ ++ ++ if (hc->qh->do_split) { ++ if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in && hcd->core_if->dma_enable) { ++ if (qtd->complete_split && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs, qtd)) ++ goto handle_xfercomp_done; ++ } ++ else { ++ qtd->complete_split = 0; ++ } ++ } ++ ++ /* Update the QTD and URB states. */ ++ switch (pipe_type) { ++ case UE_CONTROL: ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ if (urb->length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, ++ " Control setup transaction done\n"); ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ case DWC_OTG_CONTROL_DATA:{ ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, ++ qtd); ++ if (urb_xfer_done) { ++ qtd->control_phase = ++ DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, ++ " Control data transfer done\n"); ++ } else { ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ } ++ case DWC_OTG_CONTROL_STATUS: ++ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); ++ if (urb->status == -DWC_E_IN_PROGRESS) { ++ urb->status = 0; ++ } ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ break; ++ } ++ ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_BULK: ++ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ if (urb_xfer_done) { ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_INTERRUPT: ++ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ ++ /* ++ * Interrupt URB is done on the first transfer complete ++ * interrupt. ++ */ ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_URB_COMPLETE); ++ break; ++ case UE_ISOCHRONOUS: ++ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); ++ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE); ++ } ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ } ++ ++handle_xfercomp_done: ++ disable_hc_int(hc_regs, xfercompl); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel STALL interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "STALL Received--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL); ++ goto handle_stall_done; ++ } ++ ++ if (pipe_type == UE_CONTROL) { ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); ++ } ++ ++ if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) { ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); ++ /* ++ * USB protocol requires resetting the data toggle for bulk ++ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) ++ * setup command is issued to the endpoint. Anticipate the ++ * CLEAR_FEATURE command since a STALL has occurred and reset ++ * the data toggle now. ++ */ ++ hc->qh->data_toggle = 0; ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL); ++ ++handle_stall_done: ++ disable_hc_int(hc_regs, stall); ++ ++ return 1; ++} ++ ++/* ++ * Updates the state of the URB when a transfer has been stopped due to an ++ * abnormal condition before the transfer completes. Modifies the ++ * actual_length field of the URB to reflect the number of bytes that have ++ * actually been transferred via the host channel. ++ */ ++static void update_urb_state_xfer_intr(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_hcd_urb_t * urb, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd, ++ halt_status, NULL); ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && bytes_transferred && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, bytes_transferred); ++ } ++ ++ urb->actual_length += bytes_transferred; ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), ++ hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", ++ hc->start_pkt_count); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet); ++ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", ++ bytes_transferred); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", ++ urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->length); ++ } ++#endif ++} ++ ++/** ++ * Handles a host channel NAK interrupt. This handler may be called in either ++ * DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "NAK Received--\n", hc->hc_num); ++ ++ /* ++ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and ++ * interrupt. Re-start the SSPLIT transfer. ++ */ ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ qtd->error_count = 0; ++ } ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ goto handle_nak_done; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ if (hcd->core_if->dma_enable && hc->ep_is_in) { ++#ifdef HW2937_WORKAROUND ++ if (hc->halt_status == DWC_OTG_HC_XFER_PAUSE_IN) { ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ } ++#endif ++ /* ++ * NAK interrupts are enabled on bulk/control IN ++ * transfers in DMA mode for the sole purpose of ++ * resetting the error count after a transaction error ++ * occurs. The core will continue transferring data. ++ */ ++ qtd->error_count = 0; ++ goto handle_nak_done; ++ } ++ ++ /* ++ * NAK interrupts normally occur during OUT transfers in DMA ++ * or Slave mode. For IN transfers, more requests will be ++ * queued as request queue space is available. ++ */ ++ qtd->error_count = 0; ++ ++ if (!hc->qh->ping_state) { ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NAK); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) ++ hc->qh->ping_state = 1; ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will ++ * start/continue. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case UE_INTERRUPT: ++ qtd->error_count = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case UE_ISOCHRONOUS: ++#ifdef HW2937_WORKAROUND ++ if (hc->halt_status == DWC_OTG_HC_XFER_PAUSE_IN) { ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ } ++#endif ++ /* Should never get called for isochronous transfers. */ ++ DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n"); ++ break; ++ } ++ ++ handle_nak_done: ++ disable_hc_int(hc_regs, nak); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel ACK interrupt. This interrupt is enabled when ++ * performing the PING protocol in Slave mode, when errors occur during ++ * either Slave mode or DMA mode, and during Start Split transactions. ++ */ ++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "ACK Received--\n", hc->hc_num); ++ ++ if (hc->do_split) { ++ /* ++ * Handle ACK on SSPLIT. ++ * ACK should not occur in CSPLIT. ++ */ ++ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) { ++ qtd->ssplit_out_xfer_count = hc->xfer_len; ++ } ++ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) { ++ /* Don't need complete for isochronous out transfers. */ ++ qtd->complete_split = 1; ++ } ++ ++ /* ISOC OUT */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ switch (hc->xact_pos) { ++ case DWC_HCSPLIT_XACTPOS_ALL: ++ break; ++ case DWC_HCSPLIT_XACTPOS_END: ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ break; ++ case DWC_HCSPLIT_XACTPOS_BEGIN: ++ case DWC_HCSPLIT_XACTPOS_MID: ++ /* ++ * For BEGIN or MID, calculate the length for ++ * the next microframe to determine the correct ++ * SSPLIT token, either MID or END. ++ */ ++ { ++ struct dwc_otg_hcd_iso_packet_desc ++ *frame_desc; ++ ++ frame_desc = ++ &qtd->urb->iso_descs[qtd-> ++ isoc_frame_index]; ++ qtd->isoc_split_offset += 188; ++ ++ if ((frame_desc->length - ++ qtd->isoc_split_offset) <= 188) { ++ qtd->isoc_split_pos = ++ DWC_HCSPLIT_XACTPOS_END; ++ } else { ++ qtd->isoc_split_pos = ++ DWC_HCSPLIT_XACTPOS_MID; ++ } ++ ++ } ++ break; ++ } ++ } else { ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } else { ++ qtd->error_count = 0; ++ ++ if (hc->qh->ping_state) { ++ hc->qh->ping_state = 0; ++ /* ++ * Halt the channel so the transfer can be re-started ++ * from the appropriate point. This only happens in ++ * Slave mode. In DMA mode, the ping_state is cleared ++ * when the transfer is started because the core ++ * automatically executes the PING, then the transfer. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++#ifdef HW2937_WORKAROUND ++ else if (hc->halt_status == DWC_OTG_HC_XFER_PAUSE_IN) { ++ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, DWC_OTG_HC_XFER_PAUSE_IN); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PAUSE_IN); ++ } ++#endif ++ } ++ ++ /* ++ * If the ACK occurred when _not_ in the PING state, let the channel ++ * continue transferring data after clearing the error count. ++ */ ++ ++ disable_hc_int(hc_regs, ack); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel NYET interrupt. This interrupt should only occur on ++ * Bulk and Control OUT endpoints and for complete split transactions. If a ++ * NYET occurs at the same time as a Transfer Complete interrupt, it is ++ * handled in the xfercomp interrupt handler, not here. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "NYET Received--\n", hc->hc_num); ++ ++ /* ++ * NYET on CSPLIT ++ * re-do the CSPLIT immediately on non-periodic ++ */ ++ if (hc->do_split && hc->complete_split) { ++ if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hcd->core_if->dma_enable) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } ++ else ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ goto handle_nyet_done; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ int frnum = dwc_otg_hcd_get_frame_number(hcd); ++ ++ if (dwc_full_frame_num(frnum) != ++ dwc_full_frame_num(hc->qh->sched_frame)) { ++ /* ++ * No longer in the same full speed frame. ++ * Treat this as a transaction error. ++ */ ++#if 0 ++ /** @todo Fix system performance so this can ++ * be treated as an error. Right now complete ++ * splits cannot be scheduled precisely enough ++ * due to other system activity, so this error ++ * occurs regularly in Slave mode. ++ */ ++ qtd->error_count++; ++#endif ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ /** @todo add support for isoc release */ ++ goto handle_nyet_done; ++ } ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ goto handle_nyet_done; ++ } ++ ++ hc->qh->ping_state = 1; ++ qtd->error_count = 0; ++ ++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NYET); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ ++ /* ++ * Halt the channel and re-start the transfer so the PING ++ * protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ ++ handle_nyet_done: ++ disable_hc_int(hc_regs, nyet); ++ return 1; ++} ++ ++/** ++ * Handles a host channel babble interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Babble Error--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_BABBLE_ERR); ++ goto handle_babble_done; ++ } ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_OVERFLOW); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR); ++ } else { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_BABBLE_ERR); ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ ++handle_babble_done: ++ disable_hc_int(hc_regs, bblerr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel AHB error interrupt. This handler is only called in ++ * DMA mode. ++ */ ++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ char *pipetype, *speed; ++ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "AHB Error--\n", hc->hc_num); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ hcdma = dwc_read_reg32(&hc_regs->hcdma); ++ ++ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num); ++ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); ++ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); ++ DWC_ERROR(" Device address: %d\n", ++ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); ++ DWC_ERROR(" Endpoint: %d, %s\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), ++ (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT")); ++ ++ ++ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { ++case UE_CONTROL: ++ pipetype = "CONTROL"; ++ break; ++ case UE_BULK: ++ pipetype = "BULK"; ++ break; ++ case UE_INTERRUPT: ++ pipetype = "INTERRUPT"; ++ break; ++ case UE_ISOCHRONOUS: ++ pipetype = "ISOCHRONOUS"; ++ break; ++ default: ++ pipetype = "UNKNOWN"; ++ break; ++ } ++ ++ DWC_ERROR(" Endpoint type: %s\n", pipetype); ++ ++ switch (hc->speed) { ++ case DWC_OTG_EP_SPEED_HIGH: ++ speed = "HIGH"; ++ break; ++ case DWC_OTG_EP_SPEED_FULL: ++ speed = "FULL"; ++ break; ++ case DWC_OTG_EP_SPEED_LOW: ++ speed = "LOW"; ++ break; ++ default: ++ speed = "UNKNOWN"; ++ break; ++ }; ++ ++ DWC_ERROR(" Speed: %s\n", speed); ++ ++ DWC_ERROR(" Max packet size: %d\n", ++ dwc_otg_hcd_get_mps(&urb->pipe_info)); ++ DWC_ERROR(" Data buffer length: %d\n", urb->length); ++ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->buf, (void *)urb->dma); ++ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_ERROR(" Interval: %d\n", urb->interval); ++ ++ /* Core haltes the channel for Descriptor DMA mode */ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_AHB_ERR); ++ goto handle_ahberr_done; ++ } ++ ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO); ++ ++ /* ++ * Force a channel halt. Don't call halt_channel because that won't ++ * write to the HCCHARn register in DMA mode to force the halt. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR); ++handle_ahberr_done: ++ disable_hc_int(hc_regs, ahberr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel transaction error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Transaction Error--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_XACT_ERR); ++ goto handle_xacterr_done; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ qtd->error_count++; ++ if (!hc->qh->ping_state) { ++ ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ hc->qh->ping_state = 1; ++ } ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case UE_INTERRUPT: ++ qtd->error_count++; ++ if (hc->do_split && hc->complete_split) { ++ qtd->complete_split = 0; ++ } ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++handle_xacterr_done: ++ disable_hc_int(hc_regs, xacterr); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel frame overrun interrupt. This handler may be called ++ * in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Frame Overrun--\n", hc->hc_num); ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ break; ++ case UE_INTERRUPT: ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++ ++ disable_hc_int(hc_regs, frmovrun); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel data toggle error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Data Toggle Error--\n", hc->hc_num); ++ ++ if (hc->ep_is_in) { ++ qtd->error_count = 0; ++ } else { ++ DWC_ERROR("Data Toggle Error on OUT transfer," ++ "channel %d\n", hc->hc_num); ++ } ++ ++ disable_hc_int(hc_regs, datatglerr); ++ ++ return 1; ++} ++ ++#ifdef DEBUG ++/** ++ * This function is for debug only. It checks that a valid halt status is set ++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is ++ * taken and a warning is issued. ++ * @return 1 if halt status is ok, 0 otherwise. ++ */ ++static inline int halt_status_ok(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hcsplt_data_t hcsplt; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { ++ /* ++ * This code is here only as a check. This condition should ++ * never happen. Ignore the halt if it does occur. ++ */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); ++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); ++ DWC_WARN ++ ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, " ++ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " ++ "hcint 0x%08x, hcintmsk 0x%08x, " ++ "hcsplt 0x%08x, qtd->complete_split %d\n", __func__, ++ hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32, ++ hcintmsk.d32, hcsplt.d32, qtd->complete_split); ++ ++ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", ++ __func__, hc->hc_num); ++ DWC_WARN("\n"); ++ clear_hc_int(hc_regs, chhltd); ++ return 0; ++ } ++ ++ /* ++ * This code is here only as a check. hcchar.chdis should ++ * never be set when the halt interrupt occurs. Halt the ++ * channel again if it does occur. ++ */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: hcchar.chdis set unexpectedly, " ++ "hcchar 0x%08x, trying to halt again\n", ++ __func__, hcchar.d32); ++ clear_hc_int(hc_regs, chhltd); ++ hc->halt_pending = 0; ++ halt_channel(hcd, hc, qtd, hc->halt_status); ++ return 0; ++ } ++ ++ return 1; ++} ++#endif ++ ++/** ++ * Handles a host Channel Halted interrupt in DMA mode. This handler ++ * determines the reason the channel halted and proceeds accordingly. ++ */ ++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ int out_nak_enh = 0; ++ ++ /* For core with OUT NAK enhancement, the flow for high- ++ * speed CONTROL/BULK OUT is handled a little differently. ++ */ ++ if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) { ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in && ++ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) { ++ out_nak_enh = 1; ++ } ++ } ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR && !hcd->core_if->dma_desc_enable)) { ++ /* ++ * Just release the channel. A dequeue can happen on a ++ * transfer timeout. In the case of an AHB Error, the channel ++ * was forced to halt because there's no way to gracefully ++ * recover. ++ */ ++ if (hcd->core_if->dma_desc_enable) ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, hc->halt_status); ++ else ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ return; ++ } ++ ++ /* Read the HCINTn register to determine the cause for the halt. */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); ++ ++ if (hcint.b.xfercomp) { ++ /** @todo This is here because of a possible hardware bug. Spec ++ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT ++ * interrupt w/ACK bit set should occur, but I only see the ++ * XFERCOMP bit, even with it masked out. This is a workaround ++ * for that behavior. Should fix this when hardware is fixed. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } ++ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) { ++ if (out_nak_enh) { ++ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) { ++ DWC_DEBUG("XactErr with NYET/NAK/ACK\n"); ++ qtd->error_count = 0; ++ } else { ++ DWC_DEBUG("XactErr without NYET/NAK/ACK\n"); ++ } ++ } ++ ++ /* ++ * Must handle xacterr before nak or ack. Could get a xacterr ++ * at the same time as either of these on a BULK/CONTROL OUT ++ * that started with a PING. The xacterr takes precedence. ++ */ ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) { ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) { ++ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.frmovrun) { ++ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd); ++ } else if (!out_nak_enh) { ++ if (hcint.b.nyet) { ++ /* ++ * Must handle nyet before nak or ack. Could get a nyet at the ++ * same time as either of those on a BULK/CONTROL OUT that ++ * started with a PING. The nyet takes precedence. ++ */ ++ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.nak && !hcintmsk.b.nak) { ++ /* ++ * If nak is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the nak is handled by ++ * the nak interrupt handler, not here. Handle nak here for ++ * BULK/CONTROL OUT transfers, which halt on a NAK to allow ++ * rewinding the buffer pointer. ++ */ ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ack && !hcintmsk.b.ack) { ++ /* ++ * If ack is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the ack is handled by ++ * the ack interrupt handler, not here. Handle ack here for ++ * split transfers. Start splits halt on ACK. ++ */ ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * A periodic transfer halted with no other channel ++ * interrupts set. Assume it was halted by the core ++ * because it could not be completed in its scheduled ++ * (micro)frame. ++ */ ++#ifdef DEBUG ++ DWC_PRINTF ++ ("%s: Halt channel %d (assume incomplete periodic transfer)\n", ++ __func__, hc->hc_num); ++#endif ++ halt_channel(hcd, hc, qtd, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE); ++ } else { ++ DWC_ERROR ++ ("%s: Channel %d, DMA Mode -- ChHltd set, but reason " ++ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n", ++ __func__, hc->hc_num, hcint.d32, ++ dwc_read_reg32(&hcd->core_if-> ++ core_global_regs->gintsts)); ++ } ++ ++ } ++ } else { ++ DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n", ++ hcint.d32); ++ } ++} ++ ++/** ++ * Handles a host channel Channel Halted interrupt. ++ * ++ * In slave mode, this handler is called only when the driver specifically ++ * requests a halt. This occurs during handling other host channel interrupts ++ * (e.g. nak, xacterr, stall, nyet, etc.). ++ * ++ * In DMA mode, this is the interrupt that occurs when the core has finished ++ * processing a transfer on a channel. Other host channel interrupts (except ++ * ahberr) are disabled in DMA mode. ++ */ ++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Channel Halted--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_enable) { ++ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd); ++ } else { ++#ifdef DEBUG ++ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) { ++ return 1; ++ } ++#endif ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ } ++ ++ return 1; ++} ++ ++/** Handles interrupt for a specific Host Channel */ ++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num) ++{ ++ int retval = 0; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ dwc_hc_t *hc; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[num]; ++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num]; ++ qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); ++ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); ++ DWC_DEBUGPL(DBG_HCDV, ++ " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", ++ hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32)); ++ hcint.d32 = hcint.d32 & hcintmsk.d32; ++ ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ if (hcint.b.chhltd && hcint.d32 != 0x2) { ++ hcint.b.chhltd = 0; ++ } ++ } ++ ++ if (hcint.b.xfercomp) { ++ retval |= ++ handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ /* ++ * If NYET occurred at same time as Xfer Complete, the NYET is ++ * handled by the Xfer Complete interrupt handler. Don't want ++ * to call the NYET interrupt handler in this case. ++ */ ++ hcint.b.nyet = 0; ++ } ++ if (hcint.b.chhltd) { ++ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ahberr) { ++ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.stall) { ++ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nak) { ++ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ack) { ++ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nyet) { ++ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.xacterr) { ++ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.bblerr) { ++ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.frmovrun) { ++ retval |= ++ handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.datatglerr) { ++ retval |= ++ handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,848 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $ ++ * $Revision: #11 $ ++ * $Date: 2009/04/21 $ ++ * $Change: 1237476 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the implementation of the HCD. In Linux, the HCD ++ * implements the hc_driver API. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef LM_INTERFACE ++//#include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++#include ++#include ++#else ++#include ++#include ++#endif ++#elif defined(PLATFORM_INTERFACE) ++#include ++#endif ++ ++#include ++#include ++ ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_driver.h" ++ ++/** ++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is ++ * qualified with its direction (possible 32 endpoints per device). ++ */ ++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ ++ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) ++ ++static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; ++ ++/** @name Linux HC Driver API Functions */ ++/** @{ */ ++/* manage i/o requests, device state */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++static int urb_enqueue(struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep, ++ struct urb *urb, gfp_t mem_flags); ++ ++static int urb_dequeue(struct usb_hcd *hcd, struct urb *urb); ++#else ++static int urb_enqueue(struct usb_hcd *hcd, ++ struct urb *urb, gfp_t mem_flags); ++ ++static int urb_dequeue(struct usb_hcd *hcd, ++ struct urb *urb, int status); ++#endif ++ ++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep); ++ ++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); ++extern int hcd_start(struct usb_hcd *hcd); ++extern void hcd_stop(struct usb_hcd *hcd); ++static int get_frame_number(struct usb_hcd *hcd); ++extern int hub_status_data(struct usb_hcd *hcd, char *buf); ++extern int hub_control(struct usb_hcd *hcd, ++ u16 typeReq, ++ u16 wValue, u16 wIndex, char *buf, u16 wLength); ++ ++struct wrapper_priv_data { ++ dwc_otg_hcd_t *dwc_otg_hcd; ++}; ++ ++/** @} */ ++ ++static struct hc_driver dwc_otg_hc_driver = { ++ ++ .description = dwc_otg_hcd_name, ++ .product_desc = "DWC OTG Controller", ++ .hcd_priv_size = sizeof(struct wrapper_priv_data), ++ ++ .irq = dwc_otg_hcd_irq, ++ ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ //.reset = ++ .start = hcd_start, ++ //.suspend = ++ //.resume = ++ .stop = hcd_stop, ++ ++ .urb_enqueue = urb_enqueue, ++ .urb_dequeue = urb_dequeue, ++ .endpoint_disable = endpoint_disable, ++ ++ .get_frame_number = get_frame_number, ++ ++ .hub_status_data = hub_status_data, ++ .hub_control = hub_control, ++ //.bus_suspend = ++ //.bus_resume = ++}; ++ ++/** Gets the dwc_otg_hcd from a struct usb_hcd */ ++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) ++{ ++ struct wrapper_priv_data *p; ++ p = (struct wrapper_priv_data *)(hcd->hcd_priv); ++ return p->dwc_otg_hcd; ++} ++ ++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ ++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ return dwc_otg_hcd_get_priv_data(dwc_otg_hcd); ++} ++ ++/** Gets the usb_host_endpoint associated with an URB. */ ++inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb) ++{ ++ struct usb_device *dev = urb->dev; ++ int ep_num = usb_pipeendpoint(urb->pipe); ++ ++ if (usb_pipein(urb->pipe)) ++ return dev->ep_in[ep_num]; ++ else ++ return dev->ep_out[ep_num]; ++} ++ ++static int _disconnect(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ ++ usb_hcd->self.is_b_host = 0; ++ return 0; ++} ++ ++static int _start(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ ++ usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd); ++ hcd_start(usb_hcd); ++ ++ return 0; ++} ++ ++static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr, ++ uint32_t * port_addr) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++#if 1 //GRAYG - temporary ++ if (NULL == urb_handle) ++ DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG ++ if (NULL == urb->dev) ++ DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG ++ if (NULL == port_addr) ++ DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG ++#endif ++ if (urb->dev->tt) { ++ if (NULL == urb->dev->tt->hub) { ++ DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n", ++ __func__); //GRAYG ++ //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG ++ *hub_addr = 0; //GRAYG ++ // we probably shouldn't have a transaction translator if ++ // there's no associated hub? ++ } else ++ *hub_addr = urb->dev->tt->hub->devnum; ++ } else { ++ *hub_addr = 0; ++ } ++ *port_addr = urb->dev->ttport; ++ return 0; ++} ++ ++static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ return urb->dev->speed; ++} ++ ++static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ return usb_hcd->self.b_hnp_enable; ++} ++ ++static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, ++ struct urb *urb) ++{ ++ hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval; ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ hcd_to_bus(hcd)->bandwidth_isoc_reqs++; ++ } else { ++ hcd_to_bus(hcd)->bandwidth_int_reqs++; ++ } ++} ++ ++static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, ++ struct urb *urb) ++{ ++ hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval; ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ hcd_to_bus(hcd)->bandwidth_isoc_reqs--; ++ } else { ++ hcd_to_bus(hcd)->bandwidth_int_reqs--; ++ } ++} ++ ++/** ++ * Sets the final status of an URB and returns it to the device driver. Any ++ * required cleanup of the URB is performed. ++ */ ++static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n", ++ __func__, urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ++ usb_pipein(urb->pipe) ? "IN" : "OUT", status); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINTF(" ISO Desc %d status: %d\n", ++ i, urb->iso_frame_desc[i].status); ++ } ++ } ++ } ++#endif ++ ++ urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb); ++ /* Convert status value. */ ++ switch (status) { ++ case -DWC_E_PROTOCOL: ++ status = -EPROTO; ++ break; ++ case -DWC_E_IN_PROGRESS: ++ status = -EINPROGRESS; ++ break; ++ case -DWC_E_PIPE: ++ status = -EPIPE; ++ break; ++ case -DWC_E_IO: ++ status = -EIO; ++ break; ++ case -DWC_E_TIMEOUT: ++ status = -ETIMEDOUT; ++ break; ++ case -DWC_E_OVERFLOW: ++ status = -EOVERFLOW; ++ break; ++ default: ++ if (status) { ++ DWC_PRINTF("Uknown urb status %d\n", status); ++ ++ } ++ } ++ ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ ++ urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); ++ for (i = 0; i < urb->number_of_packets; ++i) { ++ urb->iso_frame_desc[i].actual_length = ++ dwc_otg_hcd_urb_get_iso_desc_actual_length ++ (dwc_otg_urb, i); ++ urb->iso_frame_desc[i].status = ++ dwc_otg_hcd_urb_get_iso_desc_status ++ (dwc_otg_urb, i); ++ } ++ } ++ ++ urb->status = status; ++ urb->hcpriv = NULL; ++ if (!status) { ++ if ((urb->transfer_flags & URB_SHORT_NOT_OK) && ++ (urb->actual_length < urb->transfer_buffer_length)) { ++ urb->status = -EREMOTEIO; ++ } ++ } ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) || ++ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); ++ if (ep) { ++ free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd), ++ dwc_otg_hcd_get_ep_bandwidth(hcd, ++ ep-> ++ hcpriv), ++ urb); ++ } ++ } ++ ++ dwc_free(dwc_otg_urb); ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb); ++#else ++ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status); ++#endif ++ return 0; ++} ++ ++static struct dwc_otg_hcd_function_ops hcd_fops = { ++ .start = _start, ++ .disconnect = _disconnect, ++ .hub_info = _hub_info, ++ .speed = _speed, ++ .complete = _complete, ++ .get_b_hnp_enable = _get_b_hnp_enable, ++}; ++ ++/** ++ * Initializes the HCD. This function allocates memory for and initializes the ++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the ++ * USB bus with the core and calls the hc_driver->start() function. It returns ++ * a negative error on failure. ++ */ ++int hcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ) ++{ ++ struct usb_hcd *hcd = NULL; ++ dwc_otg_hcd_t *dwc_otg_hcd = NULL; ++#ifdef LM_INTERFACE ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ ++ int retval = 0; ++ u64 dmamask; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev); ++ ++ /* Set device flags indicating whether the HCD supports DMA. */ ++ if (dwc_otg_is_dma_enable(otg_dev->core_if)) ++ dmamask = DMA_BIT_MASK(32); ++ else ++ dmamask = 0; ++ ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ dma_set_mask(&_dev->dev, dmamask); ++ dma_set_coherent_mask(&_dev->dev, dmamask); ++#elif defined(PCI_INTERFACE) ++ pci_set_dma_mask(_dev, dmamask); ++ pci_set_consistent_dma_mask(_dev, dmamask); ++#endif ++ ++ /* ++ * Allocate memory for the base HCD plus the DWC OTG HCD. ++ * Initialize the base HCD. ++ */ ++ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ _dev->dev.bus_id); ++#else ++ dev_name(&_dev->dev)); ++#endif ++ if (!hcd) { ++ retval = -ENOMEM; ++ goto error1; ++ } ++ ++ hcd->regs = otg_dev->base; ++ ++ /* Integrate TT in root hub */ ++ hcd->has_tt = 1; ++ ++ /* Initialize the DWC OTG HCD. */ ++ dwc_otg_hcd = dwc_otg_hcd_alloc_hcd(); ++ if (!dwc_otg_hcd) { ++ goto error2; ++ } ++ ((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd = ++ dwc_otg_hcd; ++ otg_dev->hcd = dwc_otg_hcd; ++ ++ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { ++ goto error2; ++ } ++ ++ hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); ++ ++ /* ++ * Finish generic HCD initialization and start the HCD. This function ++ * allocates the DMA buffer pool, registers the USB bus, requests the ++ * IRQ line, and calls hcd_start method. ++ */ ++#ifdef PLATFORM_INTERFACE ++ retval = usb_add_hcd(hcd, platform_get_irq(_dev, 0), IRQF_SHARED); ++#else ++ retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED); ++#endif ++ if (retval < 0) { ++ goto error2; ++ } ++ ++ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd); ++ return 0; ++ ++ error2: ++ usb_put_hcd(hcd); ++ error1: ++ return retval; ++} ++ ++/** ++ * Removes the HCD. ++ * Frees memory and resources associated with the HCD and deregisters the bus. ++ */ ++void hcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ) ++{ ++#ifdef LM_INTERFACE ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ struct usb_hcd *hcd; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev); ++ ++ if (!otg_dev) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return; ++ } ++ ++ dwc_otg_hcd = otg_dev->hcd; ++ ++ if (!dwc_otg_hcd) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return; ++ } ++ ++ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); ++ ++ if (!hcd) { ++ DWC_DEBUGPL(DBG_ANY, ++ "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", ++ __func__); ++ return; ++ } ++ usb_remove_hcd(hcd); ++ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL); ++ dwc_otg_hcd_remove(dwc_otg_hcd); ++ usb_put_hcd(hcd); ++} ++ ++/* ========================================================================= ++ * Linux HC Driver Functions ++ * ========================================================================= */ ++ ++/** Initializes the DWC_otg controller and its root hub and prepares it for host ++ * mode operation. Activates the root port. Returns 0 on success and a negative ++ * error code on failure. */ ++int hcd_start(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ struct usb_bus *bus; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); ++ bus = hcd_to_bus(hcd); ++ ++ hcd->state = HC_STATE_RUNNING; ++ if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) { ++ return 0; ++ } ++ ++ /* Initialize and connect root hub if one is not already attached */ ++ if (bus->root_hub) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); ++ /* Inform the HUB driver to resume. */ ++ usb_hcd_resume_root_hub(hcd); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void hcd_stop(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ dwc_otg_hcd_stop(dwc_otg_hcd); ++} ++ ++/** Returns the current frame number. */ ++static int get_frame_number(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd); ++} ++ ++#ifdef DEBUG ++static void dump_urb_info(struct urb *urb, char *fn_name) ++{ ++ DWC_PRINTF("%s, urb %p\n", fn_name, urb); ++ DWC_PRINTF(" Device address: %d\n", usb_pipedevice(urb->pipe)); ++ DWC_PRINTF(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), ++ (usb_pipein(urb->pipe) ? "IN" : "OUT")); ++ DWC_PRINTF(" Endpoint type: %s\n", ( { ++ char *pipetype; ++ switch (usb_pipetype(urb->pipe)) { ++case PIPE_CONTROL: ++pipetype = "CONTROL"; break; case PIPE_BULK: ++pipetype = "BULK"; break; case PIPE_INTERRUPT: ++pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS: ++pipetype = "ISOCHRONOUS"; break; default: ++ pipetype = "UNKNOWN"; break;}; ++ pipetype;} ++ )) ; ++ DWC_PRINTF(" Speed: %s\n", ( { ++ char *speed; switch (urb->dev->speed) { ++case USB_SPEED_HIGH: ++speed = "HIGH"; break; case USB_SPEED_FULL: ++speed = "FULL"; break; case USB_SPEED_LOW: ++speed = "LOW"; break; default: ++ speed = "UNKNOWN"; break;}; ++ speed;} ++ )) ; ++ DWC_PRINTF(" Max packet size: %d\n", ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); ++ DWC_PRINTF(" Data buffer length: %d\n", urb->transfer_buffer_length); ++ DWC_PRINTF(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->transfer_buffer, (void *)urb->transfer_dma); ++ DWC_PRINTF(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_PRINTF(" Interval: %d\n", urb->interval); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINTF(" ISO Desc %d:\n", i); ++ DWC_PRINTF(" offset: %d, length %d\n", ++ urb->iso_frame_desc[i].offset, ++ urb->iso_frame_desc[i].length); ++ } ++ } ++} ++ ++#endif ++ ++/** Starts processing a USB transfer request specified by a USB Request Block ++ * (URB). mem_flags indicates the type of memory allocation to use while ++ * processing this URB. */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++static int urb_enqueue(struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep, ++ struct urb *urb, gfp_t mem_flags) ++{ ++#else ++static int urb_enqueue(struct usb_hcd *hcd, ++ struct urb *urb, ++ gfp_t mem_flags) ++{ ++ struct usb_host_endpoint *ep = urb->ep; ++#endif ++ void **ref_ep_hcpriv = &ep->hcpriv; ++ int retval = 0; ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_hcd_urb_t *dwc_otg_urb; ++ int i; ++ int alloc_bandwidth = 0; ++ uint8_t ep_type = 0; ++ uint32_t flags = 0; ++ void *buf; ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "urb_enqueue"); ++ } ++#endif ++ ++ if (!urb->transfer_buffer && urb->transfer_buffer_length) ++ return -EINVAL; ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) ++ || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ if (!dwc_otg_hcd_is_bandwidth_allocated ++ (dwc_otg_hcd, ref_ep_hcpriv)) { ++ alloc_bandwidth = 1; ++ } ++ } ++ ++ switch (usb_pipetype(urb->pipe)) { ++ case PIPE_CONTROL: ++ ep_type = USB_ENDPOINT_XFER_CONTROL; ++ break; ++ case PIPE_ISOCHRONOUS: ++ ep_type = USB_ENDPOINT_XFER_ISOC; ++ break; ++ case PIPE_BULK: ++ ep_type = USB_ENDPOINT_XFER_BULK; ++ break; ++ case PIPE_INTERRUPT: ++ ep_type = USB_ENDPOINT_XFER_INT; ++ break; ++ default: ++ DWC_WARN("Wrong ep type\n"); ++ } ++ ++ dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd, ++ urb->number_of_packets, ++ mem_flags == GFP_ATOMIC ? 1 : 0); ++ ++ if(dwc_otg_urb == NULL) ++ return -ENOMEM; ++ ++ urb->hcpriv = dwc_otg_urb; ++ ++ dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ep_type, ++ usb_pipein(urb->pipe), ++ usb_maxpacket(urb->dev, urb->pipe, ++ !(usb_pipein(urb->pipe)))); ++ ++ buf = urb->transfer_buffer; ++ if (hcd->self.uses_dma) { ++ /* ++ * Calculate virtual address from physical address, ++ * because some class driver may not fill transfer_buffer. ++ * In Buffer DMA mode virual address is used, ++ * when handling non DWORD aligned buffers. ++ */ ++ //buf = phys_to_virt(urb->transfer_dma); ++ // DMA addresses are bus addresses not physical addresses! ++ buf = dma_to_virt(&urb->dev->dev, urb->transfer_dma); ++ } ++ ++ if (!(urb->transfer_flags & URB_NO_INTERRUPT)) ++ flags |= URB_GIVEBACK_ASAP; ++ if (urb->transfer_flags & URB_ZERO_PACKET) ++ flags |= URB_SEND_ZERO_PACKET; ++ ++ dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf, ++ urb->transfer_dma, ++ urb->transfer_buffer_length, ++ urb->setup_packet, ++ urb->setup_dma, ++ flags, ++ urb->interval); ++ ++ for (i = 0; i < urb->number_of_packets; ++i) { ++ dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i, ++ urb->iso_frame_desc[i]. ++ offset, ++ urb->iso_frame_desc[i]. ++ length); ++ } ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++ retval = usb_hcd_link_urb_to_ep(hcd, urb); ++ if (0 == retval) ++#endif ++ { ++ retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb, ++ /*(dwc_otg_qh_t **)*/ ++ ref_ep_hcpriv); ++ if (0 == retval) { ++ if (alloc_bandwidth) { ++ allocate_bus_bandwidth(hcd, ++ dwc_otg_hcd_get_ep_bandwidth( ++ dwc_otg_hcd, *ref_ep_hcpriv), ++ urb); ++ } ++ } else { ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++ usb_hcd_unlink_urb_from_ep(hcd, urb); ++#endif ++ if (retval == -DWC_E_NO_DEVICE) { ++ retval = -ENODEV; ++ } ++ } ++ } ++ return retval; ++} ++ ++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate ++ * success. */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++static int urb_dequeue(struct usb_hcd *hcd, struct urb *urb) ++#else ++static int urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) ++#endif ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); ++ ++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "urb_dequeue"); ++ } ++#endif ++ if(urb->hcpriv != NULL) { ++ dwc_otg_hcd_urb_dequeue(dwc_otg_hcd, (dwc_otg_hcd_urb_t *)urb->hcpriv); ++ ++ dwc_free(urb->hcpriv); ++ urb->hcpriv = NULL; ++ } ++ ++ /* Higher layer software sets URB status. */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ usb_hcd_giveback_urb(hcd, urb); ++#else ++ usb_hcd_unlink_urb_from_ep(hcd, urb); ++ usb_hcd_giveback_urb(hcd, urb, status); ++#endif ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINTF("Called usb_hcd_giveback_urb()\n"); ++ DWC_PRINTF(" urb->status = %d\n", urb->status); ++ } ++ ++ return 0; ++} ++ ++/* Frees resources in the DWC_otg controller related to a given endpoint. Also ++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint ++ * must already be dequeued. */ ++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " ++ "endpoint=%d\n", ep->desc.bEndpointAddress, ++ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); ++ dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250); ++ ep->hcpriv = NULL; ++} ++ ++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if ++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid ++ * interrupt. ++ * ++ * This function is called by the USB core when an interrupt occurs */ ++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** Creates Status Change bitmap for the root hub and root port. The bitmap is ++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 ++ * is the status change indicator for the single root port. Returns 1 if either ++ * change indicator is 1, otherwise returns 0. */ ++int hub_status_data(struct usb_hcd *hcd, char *buf) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ buf[0] = 0; ++ buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1; ++ ++ return (buf[0] != 0); ++} ++ ++/** Handles hub class-specific requests. */ ++int hub_control(struct usb_hcd *hcd, ++ u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) ++{ ++ int retval; ++ ++ retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd), ++ typeReq, wValue, wIndex, buf, wLength); ++ ++ switch (retval) { ++ case -DWC_E_INVALID: ++ retval = -EINVAL; ++ break; ++ } ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,732 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $ ++ * $Revision: #39 $ ++ * $Date: 2009/04/21 $ ++ * $Change: 1237477 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the functions to manage Queue Heads and Queue ++ * Transfer Descriptors. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++/** ++ * Free each QTD in the QH's QTD-list then free the QH. QH should already be ++ * removed from a list. QTD list should already be empty if called from URB ++ * Dequeue. ++ * ++ * @param hcd HCD instance. ++ * @param qh The QH to free. ++ */ ++void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ uint64_t flags; ++ ++ /* Free each QTD in the QTD list */ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { ++ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); ++ dwc_otg_hcd_qtd_free(qtd); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_qh_free_ddma(hcd, qh); ++ } ++ else if (qh->dw_align_buf) { ++ uint32_t buf_size; ++ if(qh->ep_type == UE_ISOCHRONOUS) { ++ buf_size = 4096; ++ } else { ++ buf_size = hcd->core_if->core_params->max_transfer_size; ++ } ++ dwc_dma_free(buf_size, qh->dw_align_buf, qh->dw_align_buf_dma); ++ } ++ ++ ++ ++ dwc_free(qh); ++ return; ++} ++ ++#define BitStuffTime(bytecount) ((8 * 7* bytecount) / 6) ++#define HS_HOST_DELAY 5 /* nanoseconds */ ++#define FS_LS_HOST_DELAY 1000 /* nanoseconds */ ++#define HUB_LS_SETUP 333 /* nanoseconds */ ++#define NS_TO_US(ns) ((ns + 500) / 1000) ++ /* convert & round nanoseconds to microseconds */ ++ ++static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, ++ int bytecount) ++{ ++ unsigned long retval; ++ ++ switch (speed) { ++ case USB_SPEED_HIGH: ++ if (is_isoc) { ++ retval = ++ ((38 * 8 * 2083) + ++ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + ++ HS_HOST_DELAY; ++ } else { ++ retval = ++ ((55 * 8 * 2083) + ++ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + ++ HS_HOST_DELAY; ++ } ++ break; ++ case USB_SPEED_FULL: ++ if (is_isoc) { ++ retval = ++ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; ++ if (is_in) { ++ retval = 7268 + FS_LS_HOST_DELAY + retval; ++ } else { ++ retval = 6265 + FS_LS_HOST_DELAY + retval; ++ } ++ } else { ++ retval = ++ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; ++ retval = 9107 + FS_LS_HOST_DELAY + retval; ++ } ++ break; ++ case USB_SPEED_LOW: ++ if (is_in) { ++ retval = ++ (67667 * (31 + 10 * BitStuffTime(bytecount))) / ++ 1000; ++ retval = ++ 64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + ++ retval; ++ } else { ++ retval = ++ (66700 * (31 + 10 * BitStuffTime(bytecount))) / ++ 1000; ++ retval = ++ 64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + ++ retval; ++ } ++ break; ++ default: ++ DWC_WARN("Unknown device speed\n"); ++ retval = -1; ++ } ++ ++ return NS_TO_US(retval); ++} ++ ++/** ++ * Initializes a QH structure. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * @param urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ */ ++#define SCHEDULE_SLOP 10 ++void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ dwc_otg_hcd_urb_t * urb) ++{ ++ char *speed, *type; ++ int dev_speed; ++ uint32_t hub_addr, hub_port; ++ ++ dwc_memset(qh, 0, sizeof(dwc_otg_qh_t)); ++ ++ /* Initialize QH */ ++ qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0; ++ ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info); ++ DWC_CIRCLEQ_INIT(&qh->qtd_list); ++ DWC_LIST_INIT(&qh->qh_list_entry); ++ qh->channel = NULL; ++ ++ /* FS/LS Enpoint on HS Hub ++ * NOT virtual root hub */ ++ dev_speed = hcd->fops->speed(hcd, urb->priv); ++ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port); ++ qh->do_split = 0; ++ if (((dev_speed == USB_SPEED_LOW) || ++ (dev_speed == USB_SPEED_FULL)) && ++ (hub_addr != 0 && hub_addr != 1)) { ++ ++ DWC_DEBUGPL(DBG_HCD, ++ "QH init: EP %d: TT found at hub addr %d, for port %d\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr, ++ hub_port); ++ ++ qh->do_split = 1; ++ } ++ ++ if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) { ++ /* Compute scheduling parameters once and save them. */ ++ hprt0_data_t hprt; ++ ++ /** @todo Account for split transfers in the bus time. */ ++ int bytecount = ++ dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); ++ ++ qh->usecs = calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed), ++ qh->ep_is_in, ++ (qh->ep_type == UE_ISOCHRONOUS), ++ bytecount); ++ /* Start in a slightly future (micro)frame. */ ++ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, ++ SCHEDULE_SLOP); ++ qh->interval = urb->interval; ++ ++#if 0 ++ /* Increase interrupt polling rate for debugging. */ ++ if (qh->ep_type == UE_INTERRUPT) { ++ qh->interval = 8; ++ } ++#endif ++ hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0); ++ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && ++ ((dev_speed == USB_SPEED_LOW) || ++ (dev_speed == USB_SPEED_FULL))) { ++ qh->interval *= 8; ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ ++ } ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", ++ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), ++ dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); ++ switch (dev_speed) { ++ case USB_SPEED_LOW: ++ qh->dev_speed = DWC_OTG_EP_SPEED_LOW; ++ speed = "low"; ++ break; ++ case USB_SPEED_FULL: ++ qh->dev_speed = DWC_OTG_EP_SPEED_FULL; ++ speed = "full"; ++ break; ++ case USB_SPEED_HIGH: ++ qh->dev_speed = DWC_OTG_EP_SPEED_HIGH; ++ speed = "high"; ++ break; ++ default: ++ speed = "?"; ++ break; ++ } ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed); ++ ++ switch (qh->ep_type) { ++ case UE_ISOCHRONOUS: ++ type = "isochronous"; ++ break; ++ case UE_INTERRUPT: ++ type = "interrupt"; ++ break; ++ case UE_CONTROL: ++ type = "control"; ++ break; ++ case UE_BULK: ++ type = "bulk"; ++ break; ++ default: ++ type = "?"; ++ break; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", type); ++ ++#ifdef DEBUG ++ if (qh->ep_type == UE_INTERRUPT) { ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", ++ qh->usecs); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", ++ qh->interval); ++ } ++#endif ++ ++} ++ ++/** ++ * This function allocates and initializes a QH. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ * ++ * @return Returns pointer to the newly allocated QH, or NULL on error. */ ++dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * urb) ++{ ++ dwc_otg_qh_t *qh; ++ ++ /* Allocate memory */ ++ /** @todo add memflags argument */ ++ qh = dwc_otg_hcd_qh_alloc(); ++ if (qh == NULL) { ++ return NULL; ++ } ++ ++ qh_init(hcd, qh, urb); ++ ++ if (hcd->core_if->dma_desc_enable && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) { ++ dwc_otg_hcd_qh_free(hcd, qh); ++ return NULL; ++ } ++ ++ return qh; ++} ++ ++/** ++ * Checks that a channel is available for a periodic transfer. ++ * ++ * @return 0 if successful, negative error code otherise. ++ */ ++static int periodic_channel_available(dwc_otg_hcd_t * hcd) ++{ ++ /* ++ * Currently assuming that there is a dedicated host channnel for each ++ * periodic transaction plus at least one host channel for ++ * non-periodic transactions. ++ */ ++ int status; ++ int num_channels; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) && ++ (hcd->periodic_channels < num_channels - 1)) { ++ status = 0; ++ } else { ++ DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", ++ __func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/** ++ * Checks that there is sufficient bandwidth for the specified QH in the ++ * periodic schedule. For simplicity, this calculation assumes that all the ++ * transfers in the periodic schedule may occur in the same (micro)frame. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH containing periodic bandwidth required. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status; ++ int16_t max_claimed_usecs; ++ ++ status = 0; ++ ++ if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) { ++ /* ++ * High speed mode. ++ * Max periodic usecs is 80% x 125 usec = 100 usec. ++ */ ++ ++ max_claimed_usecs = 100 - qh->usecs; ++ } else { ++ /* ++ * Full speed mode. ++ * Max periodic usecs is 90% x 1000 usec = 900 usec. ++ */ ++ max_claimed_usecs = 900 - qh->usecs; ++ } ++ ++ if (hcd->periodic_usecs > max_claimed_usecs) { ++ DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/** ++ * Checks that the max transfer size allowed in a host channel is large enough ++ * to handle the maximum data transfer in a single (micro)frame for a periodic ++ * transfer. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for a periodic endpoint. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status; ++ uint32_t max_xfer_size; ++ uint32_t max_channel_xfer_size; ++ ++ status = 0; ++ ++ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp); ++ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size; ++ ++ if (max_xfer_size > max_channel_xfer_size) { ++ DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n", ++ __func__, max_xfer_size, max_channel_xfer_size); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/** ++ * Schedules an interrupt or isochronous transfer in the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. The QH should already contain the ++ * scheduling information. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status = 0; ++ ++ status = periodic_channel_available(hcd); ++ if (status) { ++ DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__); //NOTICE ++ return status; ++ } ++ ++ status = check_periodic_bandwidth(hcd, qh); ++ if (status) { ++ DWC_INFO("%s: Insufficient periodic bandwidth for " "periodic transfer.\n", __func__); //NOTICE ++ return status; ++ } ++ ++ status = check_max_xfer_size(hcd, qh); ++ if (status) { ++ DWC_INFO("%s: Channel max transfer size too small " "for periodic transfer.\n", __func__); //NOTICE ++ return status; ++ } ++ ++ if (hcd->core_if->dma_desc_enable) { ++ /* Don't rely on SOF and start in ready schedule */ ++ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry); ++ } ++ else { ++ /* Always start in the inactive schedule. */ ++ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry); ++ } ++ ++ /* Reserve the periodic channel. */ ++ hcd->periodic_channels++; ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs += qh->usecs; ++ ++ return status; ++} ++ ++/** ++ * This function adds a QH to either the non periodic or periodic schedule if ++ * it is not already in the schedule. If the QH is already in the schedule, no ++ * action is taken. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status = 0; ++ uint64_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ /* QH already in a schedule. */ ++ goto done; ++ } ++ ++ /* Add the new QH to the appropriate schedule */ ++ if (dwc_qh_is_non_per(qh)) { ++ /* Always start in the inactive schedule. */ ++ DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive, ++ &qh->qh_list_entry); ++ } else { ++ status = schedule_periodic(hcd, qh); ++ } ++ ++ done: ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ ++ return status; ++} ++ ++/** ++ * Removes an interrupt or isochronous transfer from the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. ++ */ ++static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); ++ ++ /* Release the periodic channel reservation. */ ++ hcd->periodic_channels--; ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs -= qh->usecs; ++} ++ ++/** ++ * Removes a QH from either the non-periodic or periodic schedule. Memory is ++ * not freed. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh QH to remove from schedule. */ ++void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ uint64_t flags; ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ /* QH is not in a schedule. */ ++ goto done; ++ } ++ ++ if (dwc_qh_is_non_per(qh)) { ++ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) { ++ hcd->non_periodic_qh_ptr = ++ hcd->non_periodic_qh_ptr->next; ++ } ++ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); ++ } else { ++ deschedule_periodic(hcd, qh); ++ } ++ ++ done: ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++} ++ ++/** ++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active ++ * non-periodic schedule. The QH is added to the inactive non-periodic ++ * schedule if any QTDs are still attached to the QH. ++ * ++ * For periodic QHs, the QH is removed from the periodic queued schedule. If ++ * there are any QTDs still attached to the QH, the QH is added to either the ++ * periodic inactive schedule or the periodic ready schedule and its next ++ * scheduled frame is calculated. The QH is placed in the ready schedule if ++ * the scheduled frame has been reached already. Otherwise it's placed in the ++ * inactive schedule. If there are no QTDs attached to the QH, the QH is ++ * completely removed from the periodic schedule. ++ */ ++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ int sched_next_periodic_split) ++{ ++ uint64_t flags; ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ if (dwc_qh_is_non_per(qh)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule. */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ } ++ } else { ++ uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd); ++ ++ if (qh->do_split) { ++ /* Schedule the next continuing periodic split transfer */ ++ if (sched_next_periodic_split) { ++ ++ qh->sched_frame = frame_number; ++ if (dwc_frame_num_le(frame_number, ++ dwc_frame_num_inc(qh-> ++ start_split_frame, ++ 1))) { ++ /* ++ * Allow one frame to elapse after start ++ * split microframe before scheduling ++ * complete split, but DONT if we are ++ * doing the next start split in the ++ * same frame for an ISOC out. ++ */ ++ if ((qh->ep_type != UE_ISOCHRONOUS) || ++ (qh->ep_is_in != 0)) { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->sched_frame, 1); ++ } ++ } ++ } else { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->start_split_frame, ++ qh->interval); ++ if (dwc_frame_num_le ++ (qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ } else { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->sched_frame, qh->interval); ++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ } ++ ++ if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } else { ++ /* ++ * Remove from periodic_sched_queued and move to ++ * appropriate queue. ++ */ ++ if (qh->sched_frame == frame_number) { ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, ++ &qh->qh_list_entry); ++ } else { ++ DWC_LIST_MOVE_HEAD(&hcd-> ++ periodic_sched_inactive, ++ &qh->qh_list_entry); ++ } ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++} ++ ++/** ++ * This function allocates and initializes a QTD. ++ * ++ * @param urb The URB to create a QTD from. Each URB-QTD pair will end up ++ * pointing to each other so each pair should have a unique correlation. ++ * ++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */ ++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb) ++{ ++ dwc_otg_qtd_t *qtd; ++ ++ qtd = dwc_otg_hcd_qtd_alloc(); ++ if (qtd == NULL) { ++ return NULL; ++ } ++ ++ dwc_otg_hcd_qtd_init(qtd, urb); ++ return qtd; ++} ++ ++/** ++ * Initializes a QTD structure. ++ * ++ * @param qtd The QTD to initialize. ++ * @param urb The URB to use for initialization. */ ++void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb) ++{ ++ dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t)); ++ qtd->urb = urb; ++ if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) { ++ /* ++ * The only time the QTD data toggle is used is on the data ++ * phase of control transfers. This phase always starts with ++ * DATA1. ++ */ ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ qtd->control_phase = DWC_OTG_CONTROL_SETUP; ++ } ++ ++ /* start split */ ++ qtd->complete_split = 0; ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ qtd->in_process = 0; ++ ++ /* Store the qtd ptr in the urb to reference what QTD. */ ++ urb->qtd = qtd; ++ return; ++} ++ ++/** ++ * This function adds a QTD to the QTD-list of a QH. It will find the correct ++ * QH to place the QTD into. If it does not find a QH, then it will create a ++ * new QH. If the QH to which the QTD is added is not currently scheduled, it ++ * is placed into the proper schedule based on its EP type. ++ * ++ * @param[in] qtd The QTD to add ++ * @param[in] hcd The DWC HCD structure ++ * @param[out] qh out parameter to return queue head ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, ++ dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh) ++{ ++ int retval = 0; ++ uint64_t flags; ++ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ /* ++ * Get the QH which holds the QTD-list to insert to. Create QH if it ++ * doesn't exist. ++ */ ++ if (*qh == NULL) { ++ *qh = dwc_otg_hcd_qh_create(hcd, urb); ++ if (*qh == NULL) { ++ retval = -1; ++ goto done; ++ } ++ } ++ ++ retval = dwc_otg_hcd_qh_add(hcd, *qh); ++ if (retval == 0) { ++ DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd, ++ qtd_list_entry); ++ } ++ ++ done: ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,2067 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ ++ * $Revision: #79 $ ++ * $Date: 2009/04/10 $ ++ * $Change: 1230501 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements PCD Core. All code in this file is portable and don't ++ * use any OS specific functions. ++ * PCD Core provides Interface, defined in ++ * header file, which can be used to implement OS specific PCD interface. ++ * ++ * An important function of the PCD is managing interrupts generated ++ * by the DWC_otg controller. The implementation of the DWC_otg device ++ * mode interrupt service routines is in dwc_otg_pcd_intr.c. ++ * ++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). ++ * @todo Does it work when the request size is greater than DEPTSIZ ++ * transfer size ++ * ++ */ ++ ++#include "dwc_otg_pcd.h" ++ ++#ifdef DWC_UTE_CFI ++#include "dwc_otg_cfi.h" ++ ++extern int init_cfi(cfiobject_t * cfiobj); ++#endif ++ ++static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) ++{ ++ int i; ++ if (pcd->ep0.priv == handle) { ++ return &pcd->ep0; ++ } ++ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { ++ if (pcd->in_ep[i].priv == handle) ++ return &pcd->in_ep[i]; ++ if (pcd->out_ep[i].priv == handle) ++ return &pcd->out_ep[i]; ++ } ++ ++ return NULL; ++} ++ ++/** ++ * This function completes a request. It call's the request call back. ++ */ ++void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req, ++ int32_t status) ++{ ++ unsigned stopped = ep->stopped; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep); ++ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); ++ ++ /* don't modify queue heads during completion callback */ ++ ep->stopped = 1; ++ DWC_SPINUNLOCK(ep->pcd->lock); ++ ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status, ++ req->actual); ++ DWC_SPINLOCK(ep->pcd->lock); ++ ++ if (ep->pcd->request_pending > 0) { ++ --ep->pcd->request_pending; ++ } ++ ++ ep->stopped = stopped; ++ dwc_free(req); ++} ++ ++/** ++ * This function terminates all the requsts in the EP request queue. ++ */ ++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req; ++ ++ ep->stopped = 1; ++ ++ /* called with irqs blocked?? */ ++ while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN); ++ } ++} ++ ++void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, ++ const struct dwc_otg_pcd_function_ops *fops) ++{ ++ pcd->fops = fops; ++} ++ ++/** ++ * PCD Callback function for initializing the PCD when switching to ++ * device mode. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_start_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ /* ++ * Initialized the Core for Device mode. ++ */ ++ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { ++ dwc_otg_core_dev_init(GET_CORE_IF(pcd)); ++ } ++ return 1; ++} ++ ++/** CFI-specific buffer allocation function for EP */ ++#ifdef DWC_UTE_CFI ++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, ++ size_t buflen, int flags) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ep = get_ep_from_handle(pcd, pep); ++ return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen, ++ flags); ++} ++#else ++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, ++ size_t buflen, int flags); ++#endif ++ ++/** ++ * PCD Callback function for notifying the PCD when resuming from ++ * suspend. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_resume_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ if (pcd->fops->resume) { ++ pcd->fops->resume(pcd); ++ } ++ ++ /* Stop the SRP timeout timer. */ ++ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ++ || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { ++ if (GET_CORE_IF(pcd)->srp_timer_started) { ++ GET_CORE_IF(pcd)->srp_timer_started = 0; ++ DWC_TIMER_CANCEL(pcd->srp_timer); ++ } ++ } ++ return 1; ++} ++ ++/** ++ * PCD Callback function for notifying the PCD device is suspended. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_suspend_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ if (pcd->fops->suspend) { ++ pcd->fops->suspend(pcd); ++ } ++ ++ return 1; ++} ++ ++/** ++ * PCD Callback function for stopping the PCD when switching to Host ++ * mode. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_stop_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd); ++ ++ dwc_otg_pcd_stop(pcd); ++ return 1; ++} ++ ++/** ++ * PCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t pcd_callbacks = { ++ .start = dwc_otg_pcd_start_cb, ++ .stop = dwc_otg_pcd_stop_cb, ++ .suspend = dwc_otg_pcd_suspend_cb, ++ .resume_wakeup = dwc_otg_pcd_resume_cb, ++ .p = 0, /* Set at registration */ ++}; ++ ++/** ++ * This function allocates a DMA Descriptor chain for the Endpoint ++ * buffer to be used for a transfer to/from the specified endpoint. ++ */ ++dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, ++ uint32_t count) ++{ ++ ++ return dwc_dma_alloc(count * sizeof(dwc_otg_dev_dma_desc_t), dma_desc_addr); ++} ++ ++/** ++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. ++ */ ++void dwc_otg_ep_free_desc_chain(dwc_otg_dev_dma_desc_t * desc_addr, ++ uint32_t dma_desc_addr, uint32_t count) ++{ ++ dwc_dma_free(count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr, ++ dma_desc_addr); ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ ++ dsts_data_t dsts = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ int i, j; ++ ++ if (dwc_ep->is_in) ++ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; ++ else ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ ++ /** Allocate descriptors for double buffering */ ++ dwc_ep->iso_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr, ++ dwc_ep->desc_cnt * 2); ++ if (dwc_ep->desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); ++ return; ++ } ++ ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ uint32_t data_per_desc; ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[dwc_ep->num]; ++ int offset; ++ ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ dma_ad = (dma_addr_t) dwc_read_reg32(&(out_regs->doepdma)); ++ ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ offset = 0; ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep-> ++ data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_out.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ offset = 0; ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep-> ++ data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ } ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = 1; ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = 0; ++ ++ /** Write dma_ad into DOEPDMA register */ ++ dwc_write_reg32(&(out_regs->doepdma), ++ (uint32_t) dwc_ep->iso_dma_desc_addr); ++ ++ } ++ /** ISO IN EP */ ++ else { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[dwc_ep->num]; ++ unsigned int frmnumber; ++ fifosize_data_t txfifosize, rxfifosize; ++ ++ txfifosize.d32 = ++ dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]-> ++ dtxfsts); ++ rxfifosize.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->grxfsiz); ++ ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ dsts.d32 = ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = ++ (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ ++ frmnumber = dwc_ep->next_frame; ++ ++ sts.b_iso_in.framenum = frmnumber; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ /** Buffer 0 descriptors setup */ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++dma_desc; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_in.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ ++ sts.b_iso_in.ioc = 0; ++ } ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = 1; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; ++ ++ /** Write dma_ad into diepdma register */ ++ dwc_write_reg32(&(in_regs->diepdma), ++ (uint32_t) dwc_ep->iso_dma_desc_addr); ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.usbactep = 1; ++ depctl.b.cnak = 1; ++ ++ dwc_modify_reg32(addr, depctl.d32, depctl.d32); ++ depctl.d32 = dwc_read_reg32(addr); ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++ ++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) { ++ return; ++ } else { ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ ++ ep->xfer_len = ++ ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; ++ ep->pkt_cnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ ++ if (ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.mc = ep->pkt_per_frm; ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ dwc_write_reg32(& ++ (core_if->dev_if->in_ep_regs[ep->num]-> ++ diepdma), (uint32_t) ep->dma_addr); ++ ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ++ ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ dwc_write_reg32(& ++ (core_if->dev_if->out_ep_regs[ep->num]-> ++ doepdma), (uint32_t) ep->dma_addr); ++ ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ dwc_modify_reg32(addr, depctl.d32, depctl.d32); ++ ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ dwc_modify_reg32(addr, depctl.d32, depctl.d32); ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ if (ep->is_in) { ++ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; ++ } else { ++ ep->desc_cnt = ep->pkt_cnt; ++ } ++ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); ++ } else { ++ if (core_if->pti_enh_enable) { ++ dwc_otg_iso_ep_start_buf_transfer(core_if, ep); ++ } else { ++ ep->cur_pkt_addr = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep-> ++ xfer_buff0; ++ ep->cur_pkt_dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep-> ++ dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++ } ++ } else { ++ ep->cur_pkt_addr = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->cur_pkt_dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ /* disable the ep */ ++ depctl.d32 = dwc_read_reg32(addr); ++ ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ ++ dwc_write_reg32(addr, depctl.d32); ++ ++ if (core_if->dma_desc_enable && ++ ep->iso_desc_addr && ep->iso_dma_desc_addr) { ++ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr, ++ ep->iso_dma_desc_addr, ++ ep->desc_cnt * 2); ++ } ++ ++ /* reset varibales */ ++ ep->dma_addr0 = 0; ++ ep->dma_addr1 = 0; ++ ep->xfer_buff0 = 0; ++ ep->xfer_buff1 = 0; ++ ep->data_per_frame = 0; ++ ep->data_pattern_frame = 0; ++ ep->sync_frame = 0; ++ ep->buf_proc_intrvl = 0; ++ ep->bInterval = 0; ++ ep->proc_buf_num = 0; ++ ep->pkt_per_frm = 0; ++ ep->pkt_per_frm = 0; ++ ep->desc_cnt = 0; ++ ep->iso_desc_addr = 0; ++ ep->iso_dma_desc_addr = 0; ++} ++ ++int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0, ++ dwc_dma_t dma1, int sync_frame, int dp_frame, ++ int data_per_frame, int start_frame, ++ int buf_proc_intrvl, void *req_handle, ++ int atomic_alloc) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ uint64_t flags = 0; ++ dwc_ep_t *dwc_ep; ++ int32_t frm_data; ++ dsts_data_t dsts; ++ dwc_otg_core_if_t *core_if; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ core_if = GET_CORE_IF(pcd); ++ dwc_ep = &ep->dwc_ep; ++ ++ if (ep->iso_req_handle) { ++ DWC_WARN("ISO request in progress\n"); ++ } ++ ++ dwc_ep->dma_addr0 = dma0; ++ dwc_ep->dma_addr1 = dma1; ++ ++ dwc_ep->xfer_buff0 = buf0; ++ dwc_ep->xfer_buff1 = buf1; ++ ++ dwc_ep->data_per_frame = data_per_frame; ++ ++ /** @todo - pattern data support is to be implemented in the future */ ++ dwc_ep->data_pattern_frame = dp_frame; ++ dwc_ep->sync_frame = sync_frame; ++ ++ dwc_ep->buf_proc_intrvl = buf_proc_intrvl; ++ ++ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); ++ ++ dwc_ep->proc_buf_num = 0; ++ ++ dwc_ep->pkt_per_frm = 0; ++ frm_data = ep->dwc_ep.data_per_frame; ++ while (frm_data > 0) { ++ dwc_ep->pkt_per_frm++; ++ frm_data -= ep->dwc_ep.maxpacket; ++ } ++ ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ if (start_frame == -1) { ++ dwc_ep->next_frame = dsts.b.soffn + 1; ++ if (dwc_ep->bInterval != 1) { ++ dwc_ep->next_frame = ++ dwc_ep->next_frame + (dwc_ep->bInterval - 1 - ++ dwc_ep->next_frame % ++ dwc_ep->bInterval); ++ } ++ } else { ++ dwc_ep->next_frame = start_frame; ++ } ++ ++ if (!core_if->pti_enh_enable) { ++ dwc_ep->pkt_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ } else { ++ dwc_ep->pkt_cnt = ++ (dwc_ep->data_per_frame * ++ (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) ++ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; ++ } ++ ++ if (core_if->dma_desc_enable) { ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ } ++ ++ if (atomic_alloc) { ++ dwc_ep->pkt_info = ++ dwc_alloc_atomic(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } else { ++ dwc_ep->pkt_info = ++ dwc_alloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ if (!dwc_ep->pkt_info) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (core_if->pti_enh_enable) { ++ dwc_memset(dwc_ep->pkt_info, 0, ++ sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ ++ dwc_ep->cur_pkt = 0; ++ ep->iso_req_handle = req_handle; ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); ++ return 0; ++} ++ ++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle) ++{ ++ uint64_t flags = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ dwc_ep = &ep->dwc_ep; ++ ++ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); ++ ++ dwc_free(dwc_ep->pkt_info); ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (ep->iso_req_handle != req_handle) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ ep->iso_req_handle = 0; ++ return 0; ++} ++ ++/** ++ * This function is used for perodical data exchnage between PCD and gadget drivers. ++ * for Isochronous EPs ++ * ++ * - Every time a sync period completes this function is called to ++ * perform data exchange between PCD and gadget ++ */ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, ++ void *req_handle) ++{ ++ int i; ++ dwc_ep_t *dwc_ep; ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ DWC_SPINUNLOCK(ep->pcd->lock); ++ pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle, ++ dwc_ep->proc_buf_num ^ 0x1); ++ DWC_SPINLOCK(ep->pcd->lock); ++ ++ for (i = 0; i < dwc_ep->pkt_cnt; ++i) { ++ dwc_ep->pkt_info[i].status = 0; ++ dwc_ep->pkt_info[i].offset = 0; ++ dwc_ep->pkt_info[i].length = 0; ++ } ++} ++ ++int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *iso_req_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ dwc_ep = &ep->dwc_ep; ++ ++ return dwc_ep->pkt_cnt; ++} ++ ++void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *iso_req_handle, int packet, ++ int *status, int *actual, int *offset) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ dwc_ep = &ep->dwc_ep; ++ ++ *status = dwc_ep->pkt_info[packet].status; ++ *actual = dwc_ep->pkt_info[packet].length; ++ *offset = dwc_ep->pkt_info[packet].offset; ++} ++ ++#endif /* DWC_EN_ISOC */ ++ ++static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep, ++ uint32_t is_in, uint32_t ep_num) ++{ ++ /* Init EP structure */ ++ pcd_ep->desc = 0; ++ pcd_ep->pcd = pcd; ++ pcd_ep->stopped = 1; ++ pcd_ep->queue_sof = 0; ++ ++ /* Init DWC ep structure */ ++ pcd_ep->dwc_ep.is_in = is_in; ++ pcd_ep->dwc_ep.num = ep_num; ++ pcd_ep->dwc_ep.active = 0; ++ pcd_ep->dwc_ep.tx_fifo_num = 0; ++ /* Control until ep is actvated */ ++ pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++ pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; ++ pcd_ep->dwc_ep.dma_addr = 0; ++ pcd_ep->dwc_ep.start_xfer_buff = 0; ++ pcd_ep->dwc_ep.xfer_buff = 0; ++ pcd_ep->dwc_ep.xfer_len = 0; ++ pcd_ep->dwc_ep.xfer_count = 0; ++ pcd_ep->dwc_ep.sent_zlp = 0; ++ pcd_ep->dwc_ep.total_len = 0; ++ pcd_ep->dwc_ep.desc_addr = 0; ++ pcd_ep->dwc_ep.dma_desc_addr = 0; ++ DWC_CIRCLEQ_INIT(&pcd_ep->queue); ++} ++ ++/** ++ * Initialise ep's ++ */ ++static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd) ++{ ++ int i; ++ uint32_t hwcfg1; ++ dwc_otg_pcd_ep_t *ep; ++ int in_ep_cntr, out_ep_cntr; ++ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; ++ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &pcd->ep0; ++ dwc_otg_pcd_init_ep(pcd, ep, 0, 0); ++ ++ in_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; ++ for (i = 1; in_ep_cntr < num_in_eps; i++) { ++ if ((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; ++ in_ep_cntr++; ++ /** ++ * @todo NGS: Add direction to EP, based on contents ++ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? ++ * sprintf(";r ++ */ ++ dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i); ++ ++ DWC_CIRCLEQ_INIT(&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ out_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; ++ for (i = 1; out_ep_cntr < num_out_eps; i++) { ++ if ((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; ++ out_ep_cntr++; ++ /** ++ * @todo NGS: Add direction to EP, based on contents ++ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? ++ * sprintf(";r ++ */ ++ dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i); ++ DWC_CIRCLEQ_INIT(&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ pcd->ep0state = EP0_DISCONNECT; ++ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; ++ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++} ++ ++/** ++ * This function is called when the SRP timer expires. The SRP should ++ * complete within 6 seconds. ++ */ ++static void srp_timeout(void *ptr) ++{ ++ gotgctl_data_t gotgctl; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; ++ ++ gotgctl.d32 = dwc_read_reg32(addr); ++ ++ core_if->srp_timer_started = 0; ++ ++ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->core_params->i2c_enable)) { ++ DWC_PRINTF("SRP Timeout\n"); ++ ++ if ((core_if->srp_success) && (gotgctl.b.bsesvld)) { ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb-> ++ p); ++ } ++ ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gotgctl, ++ gotgctl.d32, 0); ++ ++ core_if->srp_success = 0; ++ } else { ++ __DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ dwc_write_reg32(addr, gotgctl.d32); ++ } ++ } else if (gotgctl.b.sesreq) { ++ DWC_PRINTF("SRP Timeout\n"); ++ ++ __DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ dwc_write_reg32(addr, gotgctl.d32); ++ } else { ++ DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32); ++ } ++} ++ ++/** ++ * Tasklet ++ * ++ */ ++extern void start_next_request(dwc_otg_pcd_ep_t * ep); ++ ++static void start_xfer_tasklet_func(void *data) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ int i; ++ depctl_data_t diepctl; ++ ++ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); ++ ++ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl); ++ ++ if (pcd->ep0.queue_sof) { ++ pcd->ep0.queue_sof = 0; ++ start_next_request(&pcd->ep0); ++ // break; ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; i++) { ++ depctl_data_t diepctl; ++ diepctl.d32 = ++ dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl); ++ ++ if (pcd->in_ep[i].queue_sof) { ++ pcd->in_ep[i].queue_sof = 0; ++ start_next_request(&pcd->in_ep[i]); ++ // break; ++ } ++ } ++ ++ return; ++} ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_pcd_t *pcd = 0; ++ dwc_otg_dev_if_t *dev_if; ++ ++ /* ++ * Allocate PCD structure ++ */ ++ pcd = dwc_alloc(sizeof(dwc_otg_pcd_t)); ++ ++ if (pcd == 0) { ++ return NULL; ++ } ++ ++ pcd->lock = DWC_SPINLOCK_ALLOC(); ++ DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n", ++ pcd, core_if);//GRAYG ++ pcd->core_if = core_if; ++ if (!pcd->lock) { ++ DWC_ERROR("Could not allocate lock for pcd"); ++ dwc_free(pcd); ++ return NULL; ++ } ++ dev_if = core_if->dev_if; ++ ++ if (core_if->hwcfg4.b.ded_fifo_en) { ++ DWC_PRINTF("Dedicated Tx FIFOs mode\n"); ++ } else { ++ DWC_PRINTF("Shared Tx FIFO mode\n"); ++ } ++ ++ /* ++ * Initialized the Core for Device mode. ++ */ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dwc_otg_core_dev_init(core_if); ++ } ++ ++ /* ++ * Register the PCD Callbacks. ++ */ ++ dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd); ++ ++ /* ++ * Initialize the DMA buffer for SETUP packets ++ */ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ pcd->setup_pkt = ++ dwc_dma_alloc(sizeof(*pcd->setup_pkt) * 5, ++ &pcd->setup_pkt_dma_handle); ++ if (pcd->setup_pkt == 0) { ++ dwc_free(pcd); ++ return NULL; ++ } ++ ++ pcd->status_buf = ++ dwc_dma_alloc(sizeof(uint16_t), ++ &pcd->status_buf_dma_handle); ++ if (pcd->status_buf == 0) { ++ dwc_dma_free(sizeof(*pcd->setup_pkt) * 5, ++ pcd->setup_pkt, pcd->setup_pkt_dma_handle); ++ dwc_free(pcd); ++ return NULL; ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dev_if->setup_desc_addr[0] = ++ dwc_otg_ep_alloc_desc_chain(&dev_if-> ++ dma_setup_desc_addr[0], ++ 1); ++ dev_if->setup_desc_addr[1] = ++ dwc_otg_ep_alloc_desc_chain(&dev_if-> ++ dma_setup_desc_addr[1], ++ 1); ++ dev_if->in_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(&dev_if-> ++ dma_in_desc_addr, 1); ++ dev_if->out_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(&dev_if-> ++ dma_out_desc_addr, 1); ++ ++ if (dev_if->setup_desc_addr[0] == 0 ++ || dev_if->setup_desc_addr[1] == 0 ++ || dev_if->in_desc_addr == 0 ++ || dev_if->out_desc_addr == 0) { ++ ++ if (dev_if->out_desc_addr) ++ dwc_otg_ep_free_desc_chain(dev_if-> ++ out_desc_addr, ++ dev_if-> ++ dma_out_desc_addr, ++ 1); ++ if (dev_if->in_desc_addr) ++ dwc_otg_ep_free_desc_chain(dev_if-> ++ in_desc_addr, ++ dev_if-> ++ dma_in_desc_addr, ++ 1); ++ if (dev_if->setup_desc_addr[1]) ++ dwc_otg_ep_free_desc_chain(dev_if-> ++ setup_desc_addr ++ [1], ++ dev_if-> ++ dma_setup_desc_addr ++ [1], 1); ++ if (dev_if->setup_desc_addr[0]) ++ dwc_otg_ep_free_desc_chain(dev_if-> ++ setup_desc_addr ++ [0], ++ dev_if-> ++ dma_setup_desc_addr ++ [0], 1); ++ ++ dwc_dma_free(sizeof(*pcd->setup_pkt) * 5, ++ pcd->setup_pkt, ++ pcd->setup_pkt_dma_handle); ++ dwc_dma_free(sizeof(*pcd->status_buf), ++ pcd->status_buf, ++ pcd->status_buf_dma_handle); ++ ++ dwc_free(pcd); ++ ++ return NULL; ++ } ++ } ++ } else { ++ pcd->setup_pkt = dwc_alloc(sizeof(*pcd->setup_pkt) * 5); ++ if (pcd->setup_pkt == 0) { ++ dwc_free(pcd); ++ return NULL; ++ } ++ ++ pcd->status_buf = dwc_alloc(sizeof(uint16_t)); ++ if (pcd->status_buf == 0) { ++ dwc_free(pcd->setup_pkt); ++ dwc_free(pcd); ++ return NULL; ++ } ++ } ++ ++ dwc_otg_pcd_reinit(pcd); ++ ++ /* Allocate the cfi object for the PCD */ ++#ifdef DWC_UTE_CFI ++ pcd->cfi = dwc_alloc(sizeof(cfiobject_t)); ++ if (NULL == pcd->cfi) ++ return NULL; ++ if (init_cfi(pcd->cfi)) { ++ CFI_INFO("%s: Failed to init the CFI object\n", __func__); ++ return NULL; ++ } ++#endif ++ ++ /* Initialize tasklets */ ++ pcd->start_xfer_tasklet = DWC_TASK_ALLOC(start_xfer_tasklet_func, pcd); ++ pcd->test_mode_tasklet = DWC_TASK_ALLOC(do_test_mode, pcd); ++ /* Initialize timer */ ++ pcd->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if); ++ return pcd; ++} ++ ++void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ dwc_dma_free(sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt, ++ pcd->setup_pkt_dma_handle); ++ dwc_dma_free(sizeof(uint16_t), pcd->status_buf, ++ pcd->status_buf_dma_handle); ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], ++ dev_if-> ++ dma_setup_desc_addr[0], 1); ++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], ++ dev_if-> ++ dma_setup_desc_addr[1], 1); ++ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, ++ dev_if->dma_in_desc_addr, 1); ++ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, ++ dev_if->dma_out_desc_addr, ++ 1); ++ } ++ } else { ++ dwc_free(pcd->setup_pkt); ++ dwc_free(pcd->status_buf); ++ } ++ DWC_SPINLOCK_FREE(pcd->lock); ++ DWC_TASK_FREE(pcd->start_xfer_tasklet); ++ DWC_TASK_FREE(pcd->test_mode_tasklet); ++ DWC_TIMER_FREE(pcd->srp_timer); ++ ++/* Release the CFI object's dynamic memory */ ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi->ops.release) { ++ pcd->cfi->ops.release(pcd->cfi); ++ } ++#endif ++ ++ dwc_free(pcd); ++} ++ ++uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) || ++ ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls))) { ++ return 0; ++ } ++ ++ return 1; ++} ++ ++uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ gusbcfg_data_t usbcfg = {.d32 = 0 }; ++ ++ usbcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->gusbcfg); ++ if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) { ++ return 0; ++ } ++ ++ return 1; ++} ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t TxMsk = 1; ++ int i; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) { ++ if ((TxMsk & core_if->tx_msk) == 0) { ++ core_if->tx_msk |= TxMsk; ++ return i + 1; ++ } ++ TxMsk <<= 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t PerTxMsk = 1; ++ int i; ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) { ++ if ((PerTxMsk & core_if->p_tx_msk) == 0) { ++ core_if->p_tx_msk |= PerTxMsk; ++ return i + 1; ++ } ++ PerTxMsk <<= 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if, ++ uint32_t fifo_num) ++{ ++ core_if->p_tx_msk = ++ (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; ++} ++ ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num) ++{ ++ core_if->tx_msk = ++ (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; ++} ++ ++int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, ++ const uint8_t * ep_desc, void *usb_ep) ++{ ++ int num, dir; ++ dwc_otg_pcd_ep_t *ep = 0; ++ const usb_endpoint_descriptor_t *desc; ++ uint64_t flags; ++ int retval = 0; ++ ++ desc = (const usb_endpoint_descriptor_t *)ep_desc; ++ ++ if (!desc) { ++ pcd->ep0.priv = usb_ep; ++ ep = &pcd->ep0; ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ num = UE_GET_ADDR(desc->bEndpointAddress); ++ dir = UE_GET_DIR(desc->bEndpointAddress); ++ ++ if (!desc->wMaxPacketSize) { ++ DWC_WARN("bad maxpacketsize\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ if (dir == UE_DIR_IN) { ++ ep = &pcd->in_ep[num - 1]; ++ } else { ++ ep = &pcd->out_ep[num - 1]; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ ep->desc = desc; ++ ep->priv = usb_ep; ++ ++ /* ++ * Activate the EP ++ */ ++ ep->stopped = 0; ++ ++ ep->dwc_ep.is_in = (dir == UE_DIR_IN); ++ ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize); ++ ++ ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE; ++ ++ if (ep->dwc_ep.is_in) { ++ if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ ep->dwc_ep.tx_fifo_num = 0; ++ ++ if (ep->dwc_ep.type == UE_ISOCHRONOUS) { ++ /* ++ * if ISOC EP then assign a Periodic Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = ++ assign_perio_tx_fifo(GET_CORE_IF(pcd)); ++ } ++ } else { ++ /* ++ * if Dedicated FIFOs mode is on then assign a Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = ++ assign_tx_fifo(GET_CORE_IF(pcd)); ++ ++ } ++ } ++ /* Set initial data PID. */ ++ if (ep->dwc_ep.type == UE_BULK) { ++ ep->dwc_ep.data_pid_start = 0; ++ } ++ ++ /* Alloc DMA Descriptors */ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { ++ ep->dwc_ep.desc_addr = ++ dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep. ++ dma_desc_addr, ++ MAX_DMA_DESC_CNT); ++ if (!ep->dwc_ep.desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor\n", ++ __func__); ++ retval = -DWC_E_SHUTDOWN; ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ goto out; ++ } ++ } ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n", ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); ++ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi->ops.ep_enable) { ++ pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep); ++ } ++#endif ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ out: ++ return retval; ++} ++ ++int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ uint64_t flags; ++ dwc_otg_dev_dma_desc_t *desc_addr; ++ dwc_dma_t dma_desc_addr; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || !ep->desc) { ++ DWC_DEBUGPL(DBG_PCD, "%s, %d %s not enabled\n", __func__, ++ ep->dwc_ep.num, ep->dwc_ep.is_in ? "IN" : "OUT"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ dwc_otg_request_nuke(ep); ++ ++ dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ep->desc = 0; ++ ep->stopped = 1; ++ ++ if (ep->dwc_ep.is_in) { ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ } ++ ++ /* Free DMA Descriptors */ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { ++ desc_addr = ep->dwc_ep.desc_addr; ++ dma_desc_addr = ep->dwc_ep.dma_desc_addr; ++ ++ /* Cannot call dma_free_coherent() with IRQs disabled */ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ dwc_otg_ep_free_desc_chain(desc_addr, dma_desc_addr, ++ MAX_DMA_DESC_CNT); ++ ++ goto out_unlocked; ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ out_unlocked: ++ DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ return 0; ++ ++} ++ ++int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, ++ int zero, void *req_handle, int atomic_alloc) ++{ ++ int prevented = 0; ++ uint64_t flags; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ uint32_t max_transfer; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if ((!ep->desc && ep->dwc_ep.num != 0)) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (atomic_alloc) { ++ req = dwc_alloc_atomic(sizeof(*req)); ++ } else { ++ req = dwc_alloc(sizeof(*req)); ++ } ++ ++ if (!req) { ++ return -DWC_E_NO_MEMORY; ++ } ++ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); ++ if (!GET_CORE_IF(pcd)->core_params->opt) { ++ if (ep->dwc_ep.num != 0) { ++ DWC_ERROR("queue req %p, len %d buf %p\n", ++ req_handle, buflen, buf); ++ } ++ } ++ ++ req->buf = buf; ++ req->dma = dma_buf; ++ req->length = buflen; ++ req->sent_zlp = zero; ++ req->priv = req_handle; ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* ++ * For EP0 IN without premature status, zlp is required? ++ */ ++ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { ++ DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num); ++ //_req->zero = 1; ++ } ++ ++ /* Start the transfer */ ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) { ++ /* EP0 Transfer? */ ++ if (ep->dwc_ep.num == 0) { ++ switch (pcd->ep0state) { ++ case EP0_IN_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_DATA_PHASE\n", ++ __func__); ++ break; ++ ++ case EP0_OUT_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_OUT_DATA_PHASE\n", ++ __func__); ++ if (pcd->request_config) { ++ /* Complete STATUS PHASE */ ++ ep->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_STATUS_PHASE\n", ++ __func__); ++ break; ++ ++ default: ++ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", ++ pcd->ep0state); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_SHUTDOWN; ++ } ++ ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ ep->dwc_ep.xfer_len = buflen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ if (zero) { ++ if ((ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.xfer_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++ ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } // non-ep0 endpoints ++ else { ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ /* store the request length */ ++ ep->dwc_ep.cfi_req_len = buflen; ++ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ++ ep, req); ++ } else { ++#endif ++ max_transfer = ++ GET_CORE_IF(ep->pcd)->core_params-> ++ max_transfer_size; ++ ++ /* Setup and start the Transfer */ ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = buflen; ++ ++ ep->dwc_ep.maxxfer = max_transfer; ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ uint32_t out_max_xfer = ++ DDMA_MAX_TRANSFER_SIZE - ++ (DDMA_MAX_TRANSFER_SIZE % 4); ++ if (ep->dwc_ep.is_in) { ++ if (ep->dwc_ep.maxxfer > ++ DDMA_MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = ++ DDMA_MAX_TRANSFER_SIZE; ++ } ++ } else { ++ if (ep->dwc_ep.maxxfer > ++ out_max_xfer) { ++ ep->dwc_ep.maxxfer = ++ out_max_xfer; ++ } ++ } ++ } ++ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { ++ ep->dwc_ep.maxxfer -= ++ (ep->dwc_ep.maxxfer % ++ ep->dwc_ep.maxpacket); ++ } ++ ++ if (zero) { ++ if ((ep->dwc_ep.total_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } ++ ++ if ((req != 0) || prevented) { ++ ++pcd->request_pending; ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ if (ep->dwc_ep.is_in && ep->stopped ++ && !(GET_CORE_IF(pcd)->dma_enable)) { ++ /** @todo NGS Create a function for this. */ ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.intktxfemp = 1; ++ if (GET_CORE_IF(pcd)->multiproc_int_enable) { ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs-> ++ diepeachintmsk[ep->dwc_ep.num], ++ 0, diepmsk.d32); ++ } else { ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->diepmsk, 0, ++ diepmsk.d32); ++ } ++ ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return 0; ++} ++int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle) ++{ ++ uint64_t flags; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep->desc && ep->dwc_ep.num != 0) { ++ DWC_WARN("bad argument\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* make sure it's actually queued on this endpoint */ ++ DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) { ++ if (req->priv == (void *)req_handle) { ++ break; ++ } ++ } ++ ++ if (req->priv != (void *)req_handle) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_INVALID; ++ } ++ ++ if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) { ++ dwc_otg_request_done(ep, req, -DWC_E_RESTART); ++ } else { ++ req = 0; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return req ? 0 : -DWC_E_SHUTDOWN; ++ ++} ++ ++/** ++ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests ++ * ++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) ++ * requests. If the gadget driver clears the halt status, it will ++ * automatically unwedge the endpoint. ++ * ++ * Returns zero on success, else negative DWC error code. ++ */ ++int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ uint64_t flags; ++ int retval = 0; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if ((!ep->desc && ep != &pcd->ep0) || ++ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ retval = -DWC_E_AGAIN; ++ } else { ++ /* This code needs to be reviewed */ ++ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = ++ dwc_read_reg32(&GET_CORE_IF(pcd)->core_global_regs-> ++ dptxfsiz_dieptxf[ep->dwc_ep. ++ tx_fifo_num]); ++ txstatus.d32 = ++ dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]->dtxfsts); ++ ++ if (txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() Data In Tx Fifo\n", __func__); ++ retval = -DWC_E_AGAIN; ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return retval; ++} ++ ++int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ uint64_t flags; ++ int retval = 0; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if ((!ep->desc && ep != &pcd->ep0) || ++ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ retval = -DWC_E_AGAIN; ++ } else if (value == 0) { ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } else if (value == 1) { ++ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = ++ dwc_read_reg32(&GET_CORE_IF(pcd)->core_global_regs-> ++ dptxfsiz_dieptxf[ep->dwc_ep. ++ tx_fifo_num]); ++ txstatus.d32 = ++ dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]->dtxfsts); ++ ++ if (txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() Data In Tx Fifo\n", __func__); ++ retval = -DWC_E_AGAIN; ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } else if (value == 2) { ++ ep->dwc_ep.stall_clear_flag = 0; ++ } else if (value == 3) { ++ ep->dwc_ep.stall_clear_flag = 1; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return retval; ++} ++ ++/** ++ * This function initiates remote wakeup of the host from suspend state. ++ */ ++void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set) ++{ ++ dctl_data_t dctl = { 0 }; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dsts_data_t dsts; ++ ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ if (!dsts.b.suspsts) { ++ DWC_WARN("Remote wakeup while is not in suspend state\n"); ++ } ++ /* Check if DEVICE_REMOTE_WAKEUP feature enabled */ ++ if (pcd->remote_wakeup_enable) { ++ if (set) { ++ dctl.b.rmtwkupsig = 1; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ dwc_mdelay(2); ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs-> ++ dctl, dctl.d32, 0); ++ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); ++ } ++ } else { ++ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); ++ } ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * This function initiates remote wakeup of the host from L1 sleep state. ++ */ ++void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set) ++{ ++ glpmcfg_data_t lpmcfg; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ ++ /* Check if we are in L1 state */ ++ if (!lpmcfg.b.prt_sleep_sts) { ++ DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n"); ++ return; ++ } ++ ++ /* Check if host allows remote wakeup */ ++ if (!lpmcfg.b.rem_wkup_en) { ++ DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n"); ++ return; ++ } ++ ++ /* Check if Resume OK */ ++ if (!lpmcfg.b.sleep_state_resumeok) { ++ DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n"); ++ return; ++ } ++ ++ lpmcfg.d32 = dwc_read_reg32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ dwc_write_reg32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ if (set) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.rmtwkupsig = 1; ++ /* Set RmtWkUpSig bit to start remote wakup signaling. ++ * Hardware will automatically clear this bit. ++ */ ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, ++ 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ } ++ ++} ++#endif ++ ++/** ++ * Performs remote wakeup. ++ */ ++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ if (dwc_otg_is_device_mode(core_if)) { ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->lx_state == DWC_OTG_L1) { ++ dwc_otg_pcd_rem_wkup_from_sleep(pcd, set); ++ } else { ++#endif ++ dwc_otg_pcd_rem_wkup_from_suspend(pcd, set); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ } ++#endif ++ } ++ return; ++} ++ ++int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd) ++{ ++ dsts_data_t dsts; ++ gotgctl_data_t gotgctl; ++ uint64_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* ++ * This function starts the Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++ ++ /* Check if valid session */ ++ gotgctl.d32 = ++ dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); ++ if (gotgctl.b.bsesvld) { ++ /* Check if suspend state */ ++ dsts.d32 = ++ dwc_read_reg32(& ++ (GET_CORE_IF(pcd)->dev_if->dev_global_regs-> ++ dsts)); ++ if (dsts.b.suspsts) { ++ dwc_otg_pcd_remote_wakeup(pcd, 1); ++ } ++ } else { ++ dwc_otg_pcd_initiate_srp(pcd); ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return 0; ++ ++} ++ ++/** ++ * Start the SRP timer to detect when the SRP does not complete within ++ * 6 seconds. ++ * ++ * @param pcd the pcd structure. ++ */ ++void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t * pcd) ++{ ++ GET_CORE_IF(pcd)->srp_timer_started = 1; ++ DWC_TIMER_SCHEDULE(pcd->srp_timer, 6000 /* 6 secs */ ); ++} ++ ++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd) ++{ ++ uint32_t *addr = ++ (uint32_t *) & (GET_CORE_IF(pcd)->core_global_regs->gotgctl); ++ gotgctl_data_t mem; ++ gotgctl_data_t val; ++ ++ val.d32 = dwc_read_reg32(addr); ++ if (val.b.sesreq) { ++ DWC_ERROR("Session Request Already active!\n"); ++ return; ++ } ++ ++ DWC_INFO("Session Request Initated\n"); //NOTICE ++ mem.d32 = dwc_read_reg32(addr); ++ mem.b.sesreq = 1; ++ dwc_write_reg32(addr, mem.d32); ++ ++ /* Start the SRP timer */ ++ dwc_otg_pcd_start_srp_timer(pcd); ++ return; ++} ++ ++int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd) ++{ ++ return dwc_otg_get_frame_number(GET_CORE_IF(pcd)); ++} ++ ++int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd) ++{ ++ return GET_CORE_IF(pcd)->core_params->lpm_enable; ++} ++ ++uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->b_hnp_enable; ++} ++ ++uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->a_hnp_support; ++} ++ ++uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->a_alt_hnp_support; ++} ++ ++int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->remote_wakeup_enable; ++} ++ ++#endif /* DWC_HOST_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,216 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ ++ * $Revision: #39 $ ++ * $Date: 2008/12/16 $ ++ * $Change: 1153731 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++#if !defined(__DWC_PCD_H__) ++#define __DWC_PCD_H__ ++ ++#include "usb.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_pcd_if.h" ++struct cfiobject; ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Perpherial Contoller Driver (PCD). ++ * ++ * The Peripheral Controller Driver (PCD) for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. For ++ * the Mass Storage Function driver the File-backed USB Storage Gadget ++ * (FBS) driver will be used. The FBS driver supports the ++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only ++ * transports. ++ * ++ */ ++ ++/** Max Transfer size for any EP */ ++#define DDMA_MAX_TRANSFER_SIZE 65535 ++ ++/** Max DMA Descriptor count for any EP */ ++#define MAX_DMA_DESC_CNT 64 ++ ++/** ++ * Get the pointer to the core_if from the pcd pointer. ++ */ ++#define GET_CORE_IF( _pcd ) (_pcd->core_if) ++ ++/** ++ * States of EP0. ++ */ ++typedef enum ep0_state { ++ EP0_DISCONNECT, /* no host */ ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++ EP0_IN_STATUS_PHASE, ++ EP0_OUT_STATUS_PHASE, ++ EP0_STALL, ++} ep0state_e; ++ ++/** Fordward declaration.*/ ++struct dwc_otg_pcd; ++ ++/** DWC_otg iso request structure. ++ * ++ */ ++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; ++ ++/** DWC_otg request structure. ++ * This structure is a list of requests. ++ */ ++typedef struct dwc_otg_pcd_request { ++ void *priv; ++ void *buf; ++ dwc_dma_t dma; ++ uint32_t length; ++ uint32_t actual; ++ unsigned sent_zlp:1; ++ ++ DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry; ++} dwc_otg_pcd_request_t; ++ ++DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request); ++ ++/** PCD EP structure. ++ * This structure describes an EP, there is an array of EPs in the PCD ++ * structure. ++ */ ++typedef struct dwc_otg_pcd_ep { ++ /** USB EP Descriptor */ ++ const usb_endpoint_descriptor_t *desc; ++ ++ /** queue of dwc_otg_pcd_requests. */ ++ struct req_list queue; ++ unsigned stopped:1; ++ unsigned disabling:1; ++ unsigned dma:1; ++ unsigned queue_sof:1; ++ ++#ifdef DWC_EN_ISOC ++ /** ISOC req handle passed */ ++ void *iso_req_handle; ++#endif //_EN_ISOC_ ++ ++ /** DWC_otg ep data. */ ++ dwc_ep_t dwc_ep; ++ ++ /** Pointer to PCD */ ++ struct dwc_otg_pcd *pcd; ++ ++ void *priv; ++} dwc_otg_pcd_ep_t; ++ ++/** DWC_otg PCD Structure. ++ * This structure encapsulates the data for the dwc_otg PCD. ++ */ ++struct dwc_otg_pcd { ++ const struct dwc_otg_pcd_function_ops *fops; ++ /** Core Interface */ ++ dwc_otg_core_if_t *core_if; ++ /** State of EP0 */ ++ ep0state_e ep0state; ++ /** EP0 Request is pending */ ++ unsigned ep0_pending:1; ++ /** Indicates when SET CONFIGURATION Request is in process */ ++ unsigned request_config:1; ++ /** The state of the Remote Wakeup Enable. */ ++ unsigned remote_wakeup_enable:1; ++ /** The state of the B-Device HNP Enable. */ ++ unsigned b_hnp_enable:1; ++ /** The state of A-Device HNP Support. */ ++ unsigned a_hnp_support:1; ++ /** The state of the A-Device Alt HNP support. */ ++ unsigned a_alt_hnp_support:1; ++ /** Count of pending Requests */ ++ unsigned request_pending; ++ ++ /** SETUP packet for EP0 ++ * This structure is allocated as a DMA buffer on PCD initialization ++ * with enough space for up to 3 setup packets. ++ */ ++ union { ++ usb_device_request_t req; ++ uint32_t d32[2]; ++ } *setup_pkt; ++ ++ dwc_dma_t setup_pkt_dma_handle; ++ ++ /** 2-byte dma buffer used to return status from GET_STATUS */ ++ uint16_t *status_buf; ++ dwc_dma_t status_buf_dma_handle; ++ ++ /** EP0 */ ++ dwc_otg_pcd_ep_t ep0; ++ ++ /** Array of IN EPs. */ ++ dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1]; ++ /** Array of OUT EPs. */ ++ dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1]; ++ /** number of valid EPs in the above array. */ ++// unsigned num_eps : 4; ++ dwc_spinlock_t *lock; ++ /** Timer for SRP. If it expires before SRP is successful ++ * clear the SRP. */ ++ dwc_timer_t *srp_timer; ++ ++ /** Tasklet to defer starting of TEST mode transmissions until ++ * Status Phase has been completed. ++ */ ++ dwc_tasklet_t *test_mode_tasklet; ++ ++ /** Tasklet to delay starting of xfer in DMA mode */ ++ dwc_tasklet_t *start_xfer_tasklet; ++ ++ /** The test mode to enter when the tasklet is executed. */ ++ unsigned test_mode; ++ /** The cfi_api structure that implements most of the CFI API ++ * and OTG specific core configuration functionality ++ */ ++#ifdef DWC_UTE_CFI ++ struct cfiobject *cfi; ++#endif ++ ++}; ++ ++//FIXME this functions should be static, and this prototypes should be removed ++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep); ++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, ++ dwc_otg_pcd_request_t * req, int32_t status); ++ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, ++ void *req_handle); ++ ++extern void do_test_mode(void *data); ++#endif ++#endif /* DWC_HOST_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,333 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $ ++ * $Revision: #6 $ ++ * $Date: 2009/04/03 $ ++ * $Change: 1225059 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++#if !defined(__DWC_PCD_IF_H__) ++#define __DWC_PCD_IF_H__ ++ ++#include "dwc_os.h" ++#include "dwc_otg_core_if.h" ++ ++/** @file ++ * This file defines DWC_OTG PCD Core API. ++ */ ++ ++struct dwc_otg_pcd; ++typedef struct dwc_otg_pcd dwc_otg_pcd_t; ++ ++/** Maxpacket size for EP0 */ ++#define MAX_EP0_SIZE 64 ++/** Maxpacket size for any EP */ ++#define MAX_PACKET_SIZE 1024 ++ ++/** @name Function Driver Callbacks */ ++/** @{ */ ++ ++/** This function will be called whenever a previously queued request has ++ * completed. The status value will be set to -DWC_E_SHUTDOWN to indicated a ++ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset, ++ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid ++ * parameters. */ ++typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, ++ uint32_t actual); ++/** ++ * This function will be called whenever a previousle queued ISOC request has ++ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count ++ * function. ++ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_* ++ * functions. ++ */ ++typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int proc_buf_num); ++/** This function should handle any SETUP request that cannot be handled by the ++ * PCD Core. This includes most GET_DESCRIPTORs, SET_CONFIGS, Any ++ * class-specific requests, etc. The function must non-blocking. ++ * ++ * Returns 0 on success. ++ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported. ++ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes. ++ * Returns -DWC_E_SHUTDOWN on any other error. */ ++typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes); ++/** This is called whenever the device has been disconnected. The function ++ * driver should take appropriate action to clean up all pending requests in the ++ * PCD Core, remove all endpoints (except ep0), and initialize back to reset ++ * state. */ ++typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has been connected. */ ++typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed); ++/** This function is called when device has been suspended */ ++typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has received LPM tokens, i.e. ++ * device has been sent to sleep state. */ ++typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has been resumed ++ * from suspend(L2) or L1 sleep state. */ ++typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called whenever hnp params has been changed. ++ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions ++ * to get hnp parameters. */ ++typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called whenever USB RESET is detected. */ ++typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd); ++ ++typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes); ++ ++/** Function Driver Ops Data Structure */ ++struct dwc_otg_pcd_function_ops { ++ dwc_connect_cb_t connect; ++ dwc_disconnect_cb_t disconnect; ++ dwc_setup_cb_t setup; ++ dwc_completion_cb_t complete; ++ dwc_isoc_completion_cb_t isoc_complete; ++ dwc_suspend_cb_t suspend; ++ dwc_sleep_cb_t sleep; ++ dwc_resume_cb_t resume; ++ dwc_reset_cb_t reset; ++ dwc_hnp_params_changed_cb_t hnp_changed; ++ cfi_setup_cb_t cfi_setup; ++}; ++/** @} */ ++ ++/** @name Function Driver Functions */ ++/** @{ */ ++ ++/** Call this function to get pointer on dwc_otg_pcd_t, ++ * this pointer will be used for all PCD API functions. ++ * ++ * @param core_if The DWC_OTG Core ++ */ ++extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if); ++ ++/** Frees PCD allocated by dwc_otg_pcd_init ++ * ++ * @param pcd The PCD ++ */ ++extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd); ++ ++/** Call this to bind the function driver to the PCD Core. ++ * ++ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function. ++ * @param fops The Function Driver Ops data structure containing pointers to all callbacks. ++ */ ++extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, ++ const struct dwc_otg_pcd_function_ops *fops); ++ ++/** Enables an endpoint for use. This function enables an endpoint in ++ * the PCD. The endpoint is described by the ep_desc which has the ++ * same format as a USB ep descriptor. The ep_handle parameter is used to refer ++ * to the endpoint from other API functions and in callbacks. Normally this ++ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the ++ * core for that interface. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. ++ * ++ * @param pcd The PCD ++ * @param ep_desc Endpoint descriptor ++ * @param ep_handle Handle on endpoint, that will be used to identify endpoint. ++ */ ++extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, ++ const uint8_t * ep_desc, void *ep_handle); ++ ++/** Disable the endpoint referenced by ep_handle. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle); ++ ++/** Queue a data transfer request on the endpoint referenced by ep_handle. ++ * After the transfer is completes, the complete callback will be called with ++ * the request status. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param buf The buffer for the data ++ * @param dma_buf The DMA buffer for the data ++ * @param buflen The length of the data transfer ++ * @param zero Specifies whether to send zero length last packet. ++ * @param req_handle Set this handle to any value to use to reference this ++ * request in the ep_dequeue function or from the complete callback ++ * @param atomic_alloc If driver need to perform atomic allocations ++ * for internal data structures. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, ++ uint32_t buflen, int zero, void *req_handle, ++ int atomic_alloc); ++ ++/** De-queue the specified data transfer that has not yet completed. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle); ++ ++/** Halt (STALL) an endpoint or clear it. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value); ++ ++/** This function */ ++extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle); ++ ++/** This function should be called on every hardware interrupt */ ++extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd); ++ ++/** This function returns current frame number */ ++extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd); ++ ++/** ++ * Start isochronous transfers on the endpoint referenced by ep_handle. ++ * For isochronous transfers duble buffering is used. ++ * After processing each of buffers comlete callback will be called with ++ * status for each transaction. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param buf0 The virtual address of first data buffer ++ * @param buf1 The virtual address of second data buffer ++ * @param dma0 The DMA address of first data buffer ++ * @param dma1 The DMA address of second data buffer ++ * @param sync_frame Data pattern frame number ++ * @param dp_frame Data size for pattern frame ++ * @param data_per_frame Data size for regular frame ++ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP. ++ * @param buf_proc_intrvl Interval of ISOC Buffer processing ++ * @param req_handle Handle of ISOC request ++ * @param atomic_alloc Specefies whether to perform atomic allocation for ++ * internal data structures. ++ * ++ * Returns -DWC_E_NO_MEMORY if there is no enough memory. ++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function. ++ * Returns -DW_E_SHUTDOWN for any other error. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf0, uint8_t * buf1, ++ dwc_dma_t dma0, dwc_dma_t dma1, ++ int sync_frame, int dp_frame, ++ int data_per_frame, int start_frame, ++ int buf_proc_intrvl, void *req_handle, ++ int atomic_alloc); ++ ++/** Stop ISOC transfers on endpoint referenced by ep_handle. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param req_handle Handle of ISOC request ++ * ++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function ++ * Returns 0 on success ++ */ ++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle); ++ ++/** Get ISOC packet status. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param iso_req_handle Isochronoush request handle ++ * @param packet Number of packet ++ * @param status Out parameter for returning status ++ * @param actual Out parameter for returning actual length ++ * @param offset Out parameter for returning offset ++ * ++ */ ++extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, ++ void *ep_handle, ++ void *iso_req_handle, int packet, ++ int *status, int *actual, ++ int *offset); ++ ++/** Get ISOC packet count. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param iso_req_handle ++ */ ++extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, ++ void *ep_handle, ++ void *iso_req_handle); ++ ++/** This function starts the SRP Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd); ++ ++/** This function returns 1 if LPM support is enabled, and 0 otherwise. */ ++extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd); ++ ++/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */ ++extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd); ++ ++/** Initiate SRP */ ++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd); ++ ++/** Starts remote wakeup signaling. */ ++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set); ++ ++/** This function returns whether device is dualspeed.*/ ++extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd); ++ ++/** This function returns whether device is otg. */ ++extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd); ++ ++/** These functions allow to get hnp parameters */ ++extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd); ++extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd); ++extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd); ++ ++/** CFI specific Interface functions */ ++/** Allocate a cfi buffer */ ++extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, ++ dwc_dma_t * addr, size_t buflen, ++ int flags); ++ ++/******************************************************************************/ ++ ++/** @} */ ++ ++#endif /* __DWC_PCD_IF_H__ */ ++ ++#endif /* DWC_HOST_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,4077 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $ ++ * $Revision: #93 $ ++ * $Date: 2009/04/02 $ ++ * $Change: 1224216 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++#include "dwc_otg_pcd.h" ++ ++#ifdef DWC_UTE_CFI ++#include "dwc_otg_cfi.h" ++#endif ++ ++//#define PRINT_CFI_DMA_DESCS ++ ++#define DEBUG_EP0 ++ ++/** ++ * This function updates OTG. ++ */ ++static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset) ++{ ++ ++ if (reset) { ++ pcd->b_hnp_enable = 0; ++ pcd->a_hnp_support = 0; ++ pcd->a_alt_hnp_support = 0; ++ } ++ ++ if (pcd->fops->hnp_changed) { ++ pcd->fops->hnp_changed(pcd); ++ } ++} ++ ++/** @file ++ * This file contains the implementation of the PCD Interrupt handlers. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * All interrupt registers are processed from LSB to MSB. ++ */ ++ ++/** ++ * This function prints the ep0 state for debug purposes. ++ */ ++static inline void print_ep0_state(dwc_otg_pcd_t * pcd) ++{ ++#ifdef DEBUG ++ char str[40]; ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ dwc_strcpy(str, "EP0_DISCONNECT"); ++ break; ++ case EP0_IDLE: ++ dwc_strcpy(str, "EP0_IDLE"); ++ break; ++ case EP0_IN_DATA_PHASE: ++ dwc_strcpy(str, "EP0_IN_DATA_PHASE"); ++ break; ++ case EP0_OUT_DATA_PHASE: ++ dwc_strcpy(str, "EP0_OUT_DATA_PHASE"); ++ break; ++ case EP0_IN_STATUS_PHASE: ++ dwc_strcpy(str, "EP0_IN_STATUS_PHASE"); ++ break; ++ case EP0_OUT_STATUS_PHASE: ++ dwc_strcpy(str, "EP0_OUT_STATUS_PHASE"); ++ break; ++ case EP0_STALL: ++ dwc_strcpy(str, "EP0_STALL"); ++ break; ++ default: ++ dwc_strcpy(str, "EP0_INVALID"); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state); ++#endif ++} ++ ++#ifdef DWC_UTE_CFI ++static inline void print_desc(struct dwc_otg_dma_desc *ddesc, ++ const uint8_t * epname, int descnum) ++{ ++ CFI_INFO ++ ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n", ++ epname, descnum, ddesc->buf, ddesc->status.b.bytes, ++ ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts, ++ ddesc->status.b.bs); ++} ++#endif ++ ++/** ++ * This function returns pointer to in ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ if (ep_num == 0) { ++ return &pcd->ep0; ++ } else { ++ for (i = 0; i < num_in_eps; ++i) { ++ if (pcd->in_ep[i].dwc_ep.num == ep_num) ++ return &pcd->in_ep[i]; ++ } ++ return 0; ++ } ++} ++ ++/** ++ * This function returns pointer to out ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ if (ep_num == 0) { ++ return &pcd->ep0; ++ } else { ++ for (i = 0; i < num_out_eps; ++i) { ++ if (pcd->out_ep[i].dwc_ep.num == ep_num) ++ return &pcd->out_ep[i]; ++ } ++ return 0; ++ } ++} ++ ++/** ++ * This functions gets a pointer to an EP from the wIndex address ++ * value of the control request. ++ */ ++dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ uint32_t ep_num = UE_GET_ADDR(wIndex); ++ ++ if (ep_num == 0) { ++ ep = &pcd->ep0; ++ } else if (UE_GET_DIR(wIndex) == UE_DIR_IN) { /* in ep */ ++ ep = &pcd->in_ep[ep_num - 1]; ++ } else { ++ ep = &pcd->out_ep[ep_num - 1]; ++ } ++ ++ return ep; ++} ++ ++/** ++ * This function checks the EP request queue, if the queue is not ++ * empty the next request is started. ++ */ ++void start_next_request(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req = 0; ++ uint32_t max_transfer = ++ GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; ++ ++#ifdef DWC_UTE_CFI ++ struct dwc_otg_pcd *pcd; ++ pcd = ep->pcd; ++#endif ++ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ ep->dwc_ep.cfi_req_len = req->length; ++ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req); ++ } else { ++#endif ++ /* Setup and start the Transfer */ ++ ep->dwc_ep.dma_addr = req->dma; ++ ep->dwc_ep.start_xfer_buff = req->buf; ++ ep->dwc_ep.xfer_buff = req->buf; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = req->length; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ++ ep->dwc_ep.maxxfer = max_transfer; ++ if (GET_CORE_IF(ep->pcd)->dma_desc_enable) { ++ uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE ++ - (DDMA_MAX_TRANSFER_SIZE % 4); ++ if (ep->dwc_ep.is_in) { ++ if (ep->dwc_ep.maxxfer > ++ DDMA_MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = ++ DDMA_MAX_TRANSFER_SIZE; ++ } ++ } else { ++ if (ep->dwc_ep.maxxfer > out_max_xfer) { ++ ep->dwc_ep.maxxfer = ++ out_max_xfer; ++ } ++ } ++ } ++ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { ++ ep->dwc_ep.maxxfer -= ++ (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket); ++ } ++ if (req->sent_zlp) { ++ if ((ep->dwc_ep.total_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep); ++ } ++} ++ ++/** ++ * This function handles the SOF Interrupts. At this time the SOF ++ * Interrupt is disabled. ++ */ ++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_PCD, "SOF\n"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sofintr = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Rx Status Queue Level Interrupt, which ++ * indicates that there is a least one packet in the Rx FIFO. The ++ * packets are moved from the FIFO to memory, where they will be ++ * processed when the Endpoint Interrupt Register indicates Transfer ++ * Complete or SETUP Phase Done. ++ * ++ * Repeat the following until the Rx Status Queue is empty: ++ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet ++ * info ++ * -# If Receive FIFO is empty then skip to step Clear the interrupt ++ * and exit ++ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the ++ * SETUP data to the buffer ++ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data ++ * to the destination buffer ++ */ ++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t gintmask = {.d32 = 0 }; ++ device_grxsts_data_t status; ++ dwc_otg_pcd_ep_t *ep; ++ gintsts_data_t gintsts; ++#ifdef DEBUG ++ static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" }; ++#endif ++ ++ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); ++ /* Disable the Rx Status Queue Level interrupt */ ++ gintmask.b.rxstsqlvl = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0); ++ ++ /* Get the Status from the top of the FIFO */ ++ status.d32 = dwc_read_reg32(&global_regs->grxstsp); ++ ++ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s " ++ "pktsts:%x Frame:%d(0x%0x)\n", ++ status.b.epnum, status.b.bcnt, ++ dpid_str[status.b.dpid], ++ status.b.pktsts, status.b.fn, status.b.fn); ++ /* Get pointer to EP structure */ ++ ep = get_out_ep(pcd, status.b.epnum); ++ ++ switch (status.b.pktsts) { ++ case DWC_DSTS_GOUT_NAK: ++ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n"); ++ break; ++ case DWC_STS_DATA_UPDT: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n"); ++ if (status.b.bcnt && ep->dwc_ep.xfer_buff) { ++ /** @todo NGS Check for buffer overflow? */ ++ dwc_otg_read_packet(core_if, ++ ep->dwc_ep.xfer_buff, ++ status.b.bcnt); ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ ep->dwc_ep.xfer_buff += status.b.bcnt; ++ } ++ break; ++ case DWC_STS_XFER_COMP: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n"); ++ break; ++ case DWC_DSTS_SETUP_COMP: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n"); ++#endif ++ break; ++ case DWC_DSTS_SETUP_UPDT: ++ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32); ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n", ++ pcd->setup_pkt->req.bmRequestType, ++ pcd->setup_pkt->req.bRequest, ++ UGETW(pcd->setup_pkt->req.wValue), ++ UGETW(pcd->setup_pkt->req.wIndex), ++ UGETW(pcd->setup_pkt->req.wLength)); ++#endif ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ break; ++ default: ++ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n", ++ status.b.pktsts); ++ break; ++ } ++ ++ /* Enable the Rx Status Queue Level interrupt */ ++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32); ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__); ++ return 1; ++} ++ ++/** ++ * This function examines the Device IN Token Learning Queue to ++ * determine the EP number of the last IN token received. This ++ * implementation is for the Mass Storage device where there are only ++ * 2 IN EPs (Control-IN and BULK-IN). ++ * ++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there ++ * are 8 EP Numbers in each of the other possible DTKNQ Registers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * ++ */ ++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_device_global_regs_t *dev_global_regs = ++ core_if->dev_if->dev_global_regs; ++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; ++ /* Number of Token Queue Registers */ ++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; ++ dtknq1_data_t dtknqr1; ++ uint32_t in_tkn_epnums[4]; ++ int ndx = 0; ++ int i = 0; ++ volatile uint32_t *addr = &dev_global_regs->dtknqr1; ++ int epnum = 0; ++ ++ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); ++ ++ /* Read the DTKNQ Registers */ ++ for (i = 0; i < DTKNQ_REG_CNT; i++) { ++ in_tkn_epnums[i] = dwc_read_reg32(addr); ++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, ++ in_tkn_epnums[i]); ++ if (addr == &dev_global_regs->dvbusdis) { ++ addr = &dev_global_regs->dtknqr3_dthrctl; ++ } else { ++ ++addr; ++ } ++ ++ } ++ ++ /* Copy the DTKNQR1 data to the bit field. */ ++ dtknqr1.d32 = in_tkn_epnums[0]; ++ /* Get the EP numbers */ ++ in_tkn_epnums[0] = dtknqr1.b.epnums0_5; ++ ndx = dtknqr1.b.intknwptr - 1; ++ ++ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx); ++ if (ndx == -1) { ++ /** @todo Find a simpler way to calculate the max ++ * queue position.*/ ++ int cnt = TOKEN_Q_DEPTH; ++ if (TOKEN_Q_DEPTH <= 6) { ++ cnt = TOKEN_Q_DEPTH - 1; ++ } else if (TOKEN_Q_DEPTH <= 14) { ++ cnt = TOKEN_Q_DEPTH - 7; ++ } else if (TOKEN_Q_DEPTH <= 22) { ++ cnt = TOKEN_Q_DEPTH - 15; ++ } else { ++ cnt = TOKEN_Q_DEPTH - 23; ++ } ++ epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF; ++ } else { ++ if (ndx <= 5) { ++ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 13) { ++ ndx -= 6; ++ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 21) { ++ ndx -= 14; ++ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 29) { ++ ndx -= 22; ++ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF; ++ } ++ } ++ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum); ++ return epnum; ++} ++ ++/** ++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. ++ * The active request is checked for the next packet to be loaded into ++ * the non-periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ gnptxsts_data_t txstatus = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ int epnum = 0; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ /* Get the epnum from the IN Token Learning Queue. */ ++ epnum = get_ep_of_last_in_token(core_if); ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32); ++ ++ while (txstatus.b.nptxqspcavail > 0 && ++ txstatus.b.nptxfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", ++ dwc_read_reg32(&global_regs->gnptxsts)); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.nptxfempty = 1; ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when dedicated Tx FIFO Empty interrupt occurs. ++ * The active request is checked for the next packet to be loaded into ++ * apropriate Tx FIFO. ++ */ ++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len && ++ ep->dwc_ep.xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, ++ txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, ++ dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts)); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when the Device is disconnected. It stops ++ * any active requests and informs the Gadget driver of the ++ * disconnect. ++ */ ++void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd) ++{ ++ int i, num_in_eps, num_out_eps; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_SPINLOCK(pcd->lock); ++ ++ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__); ++ /* don't disconnect drivers more than once */ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__); ++ return; ++ } ++ pcd->ep0state = EP0_DISCONNECT; ++ ++ /* Reset the OTG state. */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Disable the NP Tx Fifo Empty Interrupt. */ ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Flush the FIFOs */ ++ /**@todo NGS Flush Periodic FIFOs */ ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10); ++ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd)); ++ ++ /* prevent new request submissions, kill any outstanding requests */ ++ ep = &pcd->ep0; ++ dwc_otg_request_nuke(ep); ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_in_eps; i++) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_out_eps; i++) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ ++ /* report disconnect; the driver is already quiesced */ ++ if (pcd->fops->disconnect) { ++ DWC_SPINUNLOCK(pcd->lock); ++ pcd->fops->disconnect(pcd); ++ DWC_SPINLOCK(pcd->lock); ++ } ++ DWC_SPINUNLOCK(pcd->lock); ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr"); ++ intr_mask.b.i2cintr = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.i2cintr = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++#if defined(VERBOSE) ++ DWC_PRINTF("Early Suspend Detected\n"); ++#endif ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.erlysuspend = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This function configures EPO to receive SETUP packets. ++ * ++ * @todo NGS: Update the comments from the HW FS. ++ * ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param pcd Programming view of the PCD. ++ */ ++static inline void ep0_out_start(dwc_otg_core_if_t * core_if, ++ dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__, ++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); ++#endif ++ ++ doeptsize0.b.supcnt = 3; ++ doeptsize0.b.pktcnt = 1; ++ doeptsize0.b.xfersize = 8 * 3; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ ++ /** @todo dma needs to handle multiple setup packets (up to 3) */ ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, ++ pcd->setup_pkt_dma_handle); ++ } else { ++ dev_if->setup_desc_index = ++ (dev_if->setup_desc_index + 1) & 1; ++ dma_desc = ++ dev_if->setup_desc_addr[dev_if->setup_desc_index]; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket; ++ dma_desc->buf = pcd->setup_pkt_dma_handle; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, ++ dev_if->dma_setup_desc_addr[dev_if-> ++ setup_desc_index]); ++ } ++ ++ } else { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ } ++ ++ /** DOEPCTL0 Register write */ ++ doepctl.b.epena = 1; ++ doepctl.b.cnak = 1; ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", ++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", ++ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++} ++ ++/** ++ * This interrupt occurs when a USB Reset is detected. When the USB ++ * Reset Interrupt occurs the device state is set to DEFAULT and the ++ * EP0 state is set to IDLE. ++ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1) ++ * -# Unmask the following interrupt bits ++ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint) ++ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint) ++ * - DOEPMSK.SETUP = 1 ++ * - DOEPMSK.XferCompl = 1 ++ * - DIEPMSK.XferCompl = 1 ++ * - DIEPMSK.TimeOut = 1 ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * At this point, all the required initialization, except for enabling ++ * the control 0 OUT endpoint is done, for receiving SETUP packets. ++ */ ++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ grstctl_t resetctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ int i = 0; ++ gintsts_data_t gintsts; ++ pcgcctl_data_t power = {.d32 = 0 }; ++ ++ power.d32 = dwc_read_reg32(core_if->pcgcctl); ++ if (power.b.stoppclk) { ++ power.d32 = 0; ++ power.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, power.d32, 0); ++ ++ power.b.pwrclmp = 1; ++ dwc_modify_reg32(core_if->pcgcctl, power.d32, 0); ++ ++ power.b.rstpdwnmodule = 1; ++ dwc_modify_reg32(core_if->pcgcctl, power.d32, 0); ++ } ++ ++ core_if->lx_state = DWC_OTG_L0; ++ ++ DWC_PRINTF("USB RESET\n"); ++#ifdef DWC_EN_ISOC ++ for (i = 1; i < 16; ++i) { ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ep = get_in_ep(pcd, i); ++ if (ep != 0) { ++ dwc_ep = &ep->dwc_ep; ++ dwc_ep->next_frame = 0xffffffff; ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /* reset the HNP settings */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Clear the Remote Wakeup Signalling */ ++ dctl.b.rmtwkupsig = 1; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ ++ /* Set NAK for all OUT EPs */ ++ doepctl.b.snak = 1; ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); ++ } ++ ++ /* Flush the NP Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); ++ /* Flush the Learning Queue */ ++ resetctl.b.intknqflsh = 1; ++ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ if (core_if->multiproc_int_enable) { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if (core_if->dma_desc_enable) { ++ doepmsk.b.stsphsercvd = 1; ++ doepmsk.b.bna = 1; ++ } ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ ++ if(core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], ++ doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++/* ++ if(core_if->dma_enable) { ++ diepmsk.b.nak = 1; ++ } ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], ++ diepmsk.d32); ++ } else { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if (core_if->dma_desc_enable) { ++ doepmsk.b.stsphsercvd = 1; ++ doepmsk.b.bna = 1; ++ } ++ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++ ++ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32); ++ } ++ ++ /* Reset Device Address */ ++ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.devaddr = 0; ++ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* setup EP0 to receive SETUP packets */ ++ ep0_out_start(core_if, pcd); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbreset = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Get the device speed from the device status register and convert it ++ * to USB speed constant. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static int get_device_speed(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ int speed = 0; ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ speed = USB_SPEED_HIGH; ++ break; ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ speed = USB_SPEED_FULL; ++ break; ++ ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ speed = USB_SPEED_LOW; ++ break; ++ } ++ ++ return speed; ++} ++ ++/** ++ * Read the device status register and set the device speed in the ++ * data structure. ++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate. ++ */ ++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ gintsts_data_t gintsts; ++ gusbcfg_data_t gusbcfg; ++ dwc_otg_core_global_regs_t *global_regs = ++ GET_CORE_IF(pcd)->core_global_regs; ++ uint8_t utmi16b, utmi8b; ++ int speed; ++ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n"); ++ ++ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) { ++ utmi16b = 6; ++ utmi8b = 9; ++ } else { ++ utmi16b = 4; ++ utmi8b = 8; ++ } ++ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ pcd->ep0state = EP0_IDLE; ++ } else if (pcd->ep0state == EP0_STALL) { ++ pcd->ep0state = EP0_IDLE; ++ } ++ ++ pcd->ep0state = EP0_IDLE; ++ ++ ep0->stopped = 0; ++ ++ speed = get_device_speed(GET_CORE_IF(pcd)); ++ pcd->fops->connect(pcd, speed); ++ ++ /* Set USB turnaround time based on device speed and PHY interface. */ ++ gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ if (speed == USB_SPEED_HIGH) { ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_ULPI) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_UTMI) { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } else if (GET_CORE_IF(pcd)->hwcfg4.b. ++ utmi_phy_data_width == 1) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } else if (GET_CORE_IF(pcd)->core_params-> ++ phy_utmi_width == 8) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } else { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) { ++ /* UTMI+ OR ULPI interface */ ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } else { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)->core_params-> ++ phy_utmi_width == 16) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } else { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } ++ } ++ } ++ } else { ++ /* Full or low speed */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.enumdone = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the ISO OUT Packet was dropped due to ++ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs ++ * read all the data from the Rx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "ISOC Out Dropped"); ++ ++ intr_mask.b.isooutdrop = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.isooutdrop = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates the end of the portion of the micro-frame ++ * for periodic transactions. If there is a periodic transaction for ++ * the next frame, load the packets into the EP periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP"); ++ ++ intr_mask.b.eopframe = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.eopframe = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that EP of the packet on the top of the ++ * non-periodic Tx FIFO does not match EP of the IN Token received. ++ * ++ * The "Device IN Token Queue" Registers are read to determine the ++ * order the IN Tokens have been received. The non-periodic Tx FIFO ++ * is flushed, so it can be reloaded in the order seen in the IN Token ++ * Queue. ++ */ ++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.epmismatch = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This funcion stalls EP0. ++ */ ++static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ usb_device_request_t *ctrl = &pcd->setup_pkt->req; ++ DWC_WARN("req %02x.%02x protocol STALL; err %d\n", ++ ctrl->bmRequestType, ctrl->bRequest, err_val); ++ ++ ep0->dwc_ep.is_in = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ pcd->ep0.stopped = 1; ++ pcd->ep0state = EP0_IDLE; ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This functions delegates the setup command to the gadget driver. ++ */ ++static inline void do_gadget_setup(dwc_otg_pcd_t * pcd, ++ usb_device_request_t * ctrl) ++{ ++ int ret = 0; ++ DWC_SPINUNLOCK(pcd->lock); ++ ret = pcd->fops->setup(pcd, (uint8_t *) ctrl); ++ DWC_SPINLOCK(pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ } ++ ++ /** @todo This is a g_file_storage gadget driver specific ++ * workaround: a DELAYED_STATUS result from the fsg_setup ++ * routine will result in the gadget queueing a EP0 IN status ++ * phase for a two-stage control transfer. Exactly the same as ++ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class ++ * specific request. Need a generic way to know when the gadget ++ * driver will queue the status phase. Can we assume when we ++ * call the gadget driver setup() function that it will always ++ * queue and require the following flag? Need to look into ++ * this. ++ */ ++ ++ if (ret == 256 + 999) { ++ pcd->request_config = 1; ++ } ++} ++ ++#ifdef DWC_UTE_CFI ++/** ++ * This functions delegates the CFI setup commands to the gadget driver. ++ * This function will return a negative value to indicate a failure. ++ */ ++static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req) ++{ ++ int ret = 0; ++ ++ if (pcd->fops && pcd->fops->cfi_setup) { ++ DWC_SPINUNLOCK(pcd->lock); ++ ret = pcd->fops->cfi_setup(pcd, ctrl_req); ++ DWC_SPINLOCK(pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ return ret; ++ } ++ } ++ ++ return ret; ++} ++#endif ++ ++/** ++ * This function starts the Zero-Length Packet for the IN status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ return; ++ } ++ ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ ++ /* Prepare for more SETUP Packets */ ++ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n"); ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 1; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ //ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This function starts the Zero-Length Packet for the OUT status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n"); ++ return; ++ } ++ pcd->ep0state = EP0_OUT_STATUS_PHASE; ++ ++ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n"); ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 0; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ if (GET_CORE_IF(pcd)->dma_enable == 0) { ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++ } ++} ++ ++/** ++ * Clear the EP halt (STALL) and if pending requests start the ++ * transfer. ++ */ ++static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) ++{ ++ if (ep->dwc_ep.stall_clear_flag == 0) ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++ /* Reactive the EP */ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ if (ep->stopped) { ++ ep->stopped = 0; ++ /* If there is a request in the EP queue start it */ ++ ++ /** @todo FIXME: this causes an EP mismatch in DMA mode. ++ * epmismatch not yet implemented. */ ++ ++ /* ++ * Above fixme is solved by implmenting a tasklet to call the ++ * start_next_request(), outside of interrupt context at some ++ * time after the current time, after a clear-halt setup packet. ++ * Still need to implement ep mismatch in the future if a gadget ++ * ever uses more than one endpoint at once ++ */ ++ ep->queue_sof = 1; ++ DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet); ++ } ++ /* Start Control Status Phase */ ++ do_setup_in_status_phase(pcd); ++} ++ ++/** ++ * This function is called when the SET_FEATURE TEST_MODE Setup packet ++ * is sent from the host. The Device Control register is written with ++ * the Test Mode bits set to the specified Test Mode. This is done as ++ * a tasklet so that the "Status" phase of the control transfer ++ * completes before transmitting the TEST packets. ++ * ++ * @todo This has not been tested since the tasklet struct was put ++ * into the PCD struct! ++ * ++ */ ++void do_test_mode(void *data) ++{ ++ dctl_data_t dctl; ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ int test_mode = pcd->test_mode; ++ ++// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__); ++ ++ dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl); ++ switch (test_mode) { ++ case 1: // TEST_J ++ dctl.b.tstctl = 1; ++ break; ++ ++ case 2: // TEST_K ++ dctl.b.tstctl = 2; ++ break; ++ ++ case 3: // TEST_SE0_NAK ++ dctl.b.tstctl = 3; ++ break; ++ ++ case 4: // TEST_PACKET ++ dctl.b.tstctl = 4; ++ break; ++ ++ case 5: // TEST_FORCE_ENABLE ++ dctl.b.tstctl = 5; ++ break; ++ } ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++} ++ ++/** ++ * This function process the GET_STATUS Setup Commands. ++ */ ++static inline void do_get_status(dwc_otg_pcd_t * pcd) ++{ ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ uint16_t *status = pcd->status_buf; ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++#endif ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ *status = 0x1; /* Self powered */ ++ *status |= pcd->remote_wakeup_enable << 1; ++ break; ++ ++ case UT_INTERFACE: ++ *status = 0; ++ break; ++ ++ case UT_ENDPOINT: ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0 || UGETW(ctrl.wLength) > 2) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ /** @todo check for EP stall */ ++ *status = ep->stopped; ++ break; ++ } ++ pcd->ep0_pending = 1; ++ ep0->dwc_ep.start_xfer_buff = (uint8_t *) status; ++ ep0->dwc_ep.xfer_buff = (uint8_t *) status; ++ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle; ++ ep0->dwc_ep.xfer_len = 2; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++} ++ ++/** ++ * This function process the SET_FEATURE Setup Commands. ++ */ ++static inline void do_set_feature(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++ DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param); ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ switch (UGETW(ctrl.wValue)) { ++ case UF_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 1; ++ break; ++ ++ case UF_TEST_MODE: ++ /* Setup the Test Mode tasklet to do the Test ++ * Packet generation after the SETUP Status ++ * phase has completed. */ ++ ++ /** @todo This has not been tested since the ++ * tasklet struct was put into the PCD ++ * struct! */ ++ pcd->test_mode = UGETW(ctrl.wIndex) >> 8; ++ DWC_TASK_SCHEDULE(pcd->test_mode_tasklet); ++ break; ++ ++ case UF_DEVICE_B_HNP_ENABLE: ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); ++ ++ /* dev may initiate HNP */ ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->b_hnp_enable = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n"); ++ /**@todo Is the gotgctl.devhnpen cleared ++ * by a USB Reset? */ ++ gotgctl.b.devhnpen = 1; ++ gotgctl.b.hnpreq = 1; ++ dwc_write_reg32(&global_regs->gotgctl, ++ gotgctl.d32); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ } ++ break; ++ ++ case UF_DEVICE_A_HNP_SUPPORT: ++ /* RH port supports HNP */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ } ++ break; ++ ++ case UF_DEVICE_A_ALT_HNP_SUPPORT: ++ /* other RH port does */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_alt_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ } ++ break; ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case UT_INTERFACE: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case UT_ENDPOINT: ++ if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) { ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep); ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ } ++} ++ ++/** ++ * This function process the CLEAR_FEATURE Setup Commands. ++ */ ++static inline void do_clear_feature(dwc_otg_pcd_t * pcd) ++{ ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ switch (UGETW(ctrl.wValue)) { ++ case UF_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 0; ++ break; ++ ++ case UF_TEST_MODE: ++ /** @todo Add CLEAR_FEATURE for TEST modes. */ ++ break; ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case UT_ENDPOINT: ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ ++ pcd_clear_halt(pcd, ep); ++ ++ break; ++ } ++} ++ ++/** ++ * This function process the SET_ADDRESS Setup Commands. ++ */ ++static inline void do_set_address(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ ++ if (ctrl.bmRequestType == UT_DEVICE) { ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ ++#ifdef DEBUG_EP0 ++// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue); ++#endif ++ dcfg.b.devaddr = UGETW(ctrl.wValue); ++ dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32); ++ do_setup_in_status_phase(pcd); ++ } ++} ++ ++/** ++ * This function processes SETUP commands. In Linux, the USB Command ++ * processing is done in two places - the first being the PCD and the ++ * second in the Gadget Driver (for example, the File-Backed Storage ++ * Gadget Driver). ++ * ++ *
Parameter NameMeaning
otg_capSpecifies the OTG capabilities. The driver will automatically detect the ++ value for this parameter if none is specified. ++ - 0: HNP and SRP capable (default, if available) ++ - 1: SRP Only capable ++ - 2: No HNP/SRP capable ++
dma_enableSpecifies whether to use slave or DMA mode for accessing the data FIFOs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Slave ++ - 1: DMA (default, if available) ++
dma_burst_sizeThe DMA Burst size (applicable only for External DMA Mode). ++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++
speedSpecifies the maximum speed of operation in host and device mode. The ++ actual speed depends on the speed of the attached device and the value of ++ phy_type. ++ - 0: High Speed (default) ++ - 1: Full Speed ++
host_support_fs_ls_low_powerSpecifies whether low power mode is supported when attached to a Full ++ Speed or Low Speed device in host mode. ++ - 0: Don't support low power mode (default) ++ - 1: Support low power mode ++
host_ls_low_power_phy_clkSpecifies the PHY clock rate in low power mode when connected to a Low ++ Speed device in host mode. This parameter is applicable only if ++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled. ++ - 0: 48 MHz (default) ++ - 1: 6 MHz ++
enable_dynamic_fifo Specifies whether FIFOs may be resized by the driver software. ++ - 0: Use cC FIFO size parameters ++ - 1: Allow dynamic FIFO sizing (default) ++
data_fifo_sizeTotal number of 4-byte words in the data FIFO memory. This memory ++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. ++ - Values: 32 to 32768 (default 8192) ++ ++ Note: The total FIFO memory depth in the FPGA configuration is 8192. ++
dev_rx_fifo_sizeNumber of 4-byte words in the Rx FIFO in device mode when dynamic ++ FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1064) ++
dev_nperio_tx_fifo_sizeNumber of 4-byte words in the non-periodic Tx FIFO in device mode when ++ dynamic FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
dev_perio_tx_fifo_size_n (n = 1 to 15)Number of 4-byte words in each of the periodic Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++
host_rx_fifo_sizeNumber of 4-byte words in the Rx FIFO in host mode when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
host_nperio_tx_fifo_sizeNumber of 4-byte words in the non-periodic Tx FIFO in host mode when ++ dynamic FIFO sizing is enabled in the core. ++ - Values: 16 to 32768 (default 1024) ++
host_perio_tx_fifo_sizeNumber of 4-byte words in the host periodic Tx FIFO when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
max_transfer_sizeThe maximum transfer size supported in bytes. ++ - Values: 2047 to 65,535 (default 65,535) ++
max_packet_countThe maximum number of packets in a transfer. ++ - Values: 15 to 511 (default 511) ++
host_channelsThe number of host channel registers to use. ++ - Values: 1 to 16 (default 12) ++ ++ Note: The FPGA configuration supports a maximum of 12 host channels. ++
dev_endpointsThe number of endpoints in addition to EP0 available for device mode ++ operations. ++ - Values: 1 to 15 (default 6 IN and OUT) ++ ++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in ++ addition to EP0. ++
phy_typeSpecifies the type of PHY interface to use. By default, the driver will ++ automatically detect the phy_type. ++ - 0: Full Speed ++ - 1: UTMI+ (default, if available) ++ - 2: ULPI ++
phy_utmi_widthSpecifies the UTMI+ Data Width. This parameter is applicable for a ++ phy_type of UTMI+. Also, this parameter is applicable only if the ++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the ++ core has been configured to work at either data path width. ++ - Values: 8 or 16 bits (default 16) ++
phy_ulpi_ddrSpecifies whether the ULPI operates at double or single data rate. This ++ parameter is only applicable if phy_type is ULPI. ++ - 0: single data rate ULPI interface with 8 bit wide data bus (default) ++ - 1: double data rate ULPI interface with 4 bit wide data bus ++
i2c_enableSpecifies whether to use the I2C interface for full speed PHY. This ++ parameter is only applicable if PHY_TYPE is FS. ++ - 0: Disabled (default) ++ - 1: Enabled ++
otg_en_multiple_tx_fifoSpecifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Disabled ++ - 1: Enabled (default, if available) ++
dev_tx_fifo_size_n (n = 1 to 15)Number of 4-byte words in each of the Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++
tx_thr_lengthTransmit Threshold length in 32 bit double words ++ - Values: 8 to 128 (default 64) ++
rx_thr_lengthReceive Threshold length in 32 bit double words ++ - Values: 8 to 128 (default 64) ++
thr_ctlSpecifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of this ++ parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and Rx ++ transfers accordingly. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - Values: 0 to 7 (default 0) ++ Bit values indicate: ++ - 0: Thresholding disabled ++ - 1: Thresholding enabled ++
dma_desc_enableSpecifies whether to enable Descriptor DMA mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Descriptor DMA disabled ++ - 1: Descriptor DMA (default, if available) ++
mpi_enableSpecifies whether to enable MPI enhancement mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: MPI disabled (default) ++ - 1: MPI enable ++
pti_enableSpecifies whether to enable PTI enhancement support. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: PTI disabled (default) ++ - 1: PTI enable ++
lpm_enableSpecifies whether to enable LPM support. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: LPM disabled ++ - 1: LPM enable (default, if available) ++
ahb_thr_ratioSpecifies AHB Threshold ratio. ++ - Values: 0 to 3 (default 0) ++
++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ *
Command Driver Description
GET_STATUS PCD Command is processed as ++ * defined in chapter 9 of the USB 2.0 Specification chapter 9 ++ *
CLEAR_FEATURE PCD The Device and Endpoint ++ * requests are the ENDPOINT_HALT feature is procesed, all others the ++ * interface requests are ignored.
SET_FEATURE PCD The Device and Endpoint ++ * requests are processed by the PCD. Interface requests are passed ++ * to the Gadget Driver.
SET_ADDRESS PCD Program the DCFG reg, ++ * with device address received
GET_DESCRIPTOR Gadget Driver Return the ++ * requested descriptor
SET_DESCRIPTOR Gadget Driver Optional - ++ * not implemented by any of the existing Gadget Drivers.
SET_CONFIGURATION Gadget Driver Disable ++ * all EPs and enable EPs for new configuration.
GET_CONFIGURATION Gadget Driver Return ++ * the current configuration
SET_INTERFACE Gadget Driver Disable all ++ * EPs and enable EPs for new configuration.
GET_INTERFACE Gadget Driver Return the ++ * current interface.
SYNC_FRAME PCD Display debug ++ * message.
++ * ++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are ++ * processed by pcd_setup. Calling the Function Driver's setup function from ++ * pcd_setup processes the gadget SETUP commands. ++ */ ++static inline void pcd_setup(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ ++#ifdef DWC_UTE_CFI ++ int retval = 0; ++ struct cfi_usb_ctrlrequest cfi_req; ++#endif ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++#endif ++ ++ doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz); ++ ++ /** @todo handle > 1 setup packet , assert error for now */ ++ ++ if (core_if->dma_enable && core_if->dma_desc_enable == 0 ++ && (doeptsize0.b.supcnt < 2)) { ++ DWC_ERROR ++ ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n"); ++ } ++ ++ /* Clean up the request queue */ ++ dwc_otg_request_nuke(ep0); ++ ep0->stopped = 0; ++ ++ if (ctrl.bmRequestType & UE_DIR_IN) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_DATA_PHASE; ++ } else { ++ ep0->dwc_ep.is_in = 0; ++ pcd->ep0state = EP0_OUT_DATA_PHASE; ++ } ++ ++ if (UGETW(ctrl.wLength) == 0) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ ++ if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) { ++ ++#ifdef DWC_UTE_CFI ++ DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t)); ++ ++ //printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n", ctrl.bRequestType, ctrl.bRequest); ++ if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) { ++ if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) { ++ retval = cfi_setup(pcd, &cfi_req); ++ if (retval < 0) { ++ ep0_do_stall(pcd, retval); ++ pcd->ep0_pending = 0; ++ return; ++ } ++ ++ /* if need gadget setup then call it and check the retval */ ++ if (pcd->cfi->need_gadget_att) { ++ retval = ++ cfi_gadget_setup(pcd, ++ &pcd->cfi-> ++ ctrl_req); ++ if (retval < 0) { ++ pcd->ep0_pending = 0; ++ return; ++ } ++ } ++ ++ if (pcd->cfi->need_status_in_complete) { ++ do_setup_in_status_phase(pcd); ++ } ++ return; ++ } ++ } ++#endif ++ ++ /* handle non-standard (class/vendor) requests in the gadget driver */ ++ do_gadget_setup(pcd, &ctrl); ++ return; ++ } ++ ++ /** @todo NGS: Handle bad setup packet? */ ++ ++/////////////////////////////////////////// ++//// --- Standard Request handling --- //// ++ ++ switch (ctrl.bRequest) { ++ case UR_GET_STATUS: ++ do_get_status(pcd); ++ break; ++ ++ case UR_CLEAR_FEATURE: ++ do_clear_feature(pcd); ++ break; ++ ++ case UR_SET_FEATURE: ++ do_set_feature(pcd); ++ break; ++ ++ case UR_SET_ADDRESS: ++ do_set_address(pcd); ++ break; ++ ++ case UR_SET_INTERFACE: ++ case UR_SET_CONFIG: ++// _pcd->request_config = 1; /* Configuration changed */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case UR_SYNCH_FRAME: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ default: ++ /* Call the Gadget Driver's setup functions */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ } ++} ++ ++/** ++ * This function completes the ep0 control transfer. ++ */ ++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++#ifdef DEBUG_EP0 ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++#endif ++ deptsiz0_data_t deptsiz; ++ dev_dma_desc_sts_t desc_sts; ++ dwc_otg_pcd_request_t *req; ++ int is_last = 0; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ ++#ifdef DWC_UTE_CFI ++ struct cfi_usb_ctrlrequest *ctrlreq; ++ int retval = -DWC_E_NOT_SUPPORTED; ++#endif ++ ++ if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ if (ep->dwc_ep.is_in) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n"); ++#endif ++ do_setup_out_status_phase(pcd); ++ } else { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n"); ++#endif ++ ++#ifdef DWC_UTE_CFI ++ ctrlreq = &pcd->cfi->ctrl_req; ++ ++ if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) { ++ if (ctrlreq->bRequest > 0xB0 ++ && ctrlreq->bRequest < 0xBF) { ++ ++ /* Return if the PCD failed to handle the request */ ++ if ((retval = ++ pcd->cfi->ops. ++ ctrl_write_complete(pcd->cfi, ++ pcd)) < 0) { ++ CFI_INFO ++ ("ERROR setting a new value in the PCD(%d)\n", ++ retval); ++ ep0_do_stall(pcd, retval); ++ pcd->ep0_pending = 0; ++ return 0; ++ } ++ ++ /* If the gadget needs to be notified on the request */ ++ if (pcd->cfi->need_gadget_att == 1) { ++ //retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req); ++ retval = ++ cfi_gadget_setup(pcd, ++ &pcd->cfi-> ++ ctrl_req); ++ ++ /* Return from the function if the gadget failed to process ++ * the request properly - this should never happen !!! ++ */ ++ if (retval < 0) { ++ CFI_INFO ++ ("ERROR setting a new value in the gadget(%d)\n", ++ retval); ++ pcd->ep0_pending = 0; ++ return 0; ++ } ++ } ++ ++ CFI_INFO("%s: RETVAL=%d\n", __func__, ++ retval); ++ /* If we hit here then the PCD and the gadget has properly ++ * handled the request - so send the ZLP IN to the host. ++ */ ++ /* @todo: MAS - decide whether we need to start the setup ++ * stage based on the need_setup value of the cfi object ++ */ ++ do_setup_in_status_phase(pcd); ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ } ++#endif ++ ++ do_setup_in_status_phase(pcd); ++ } ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ return 0; ++ } ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE ++ || pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ is_last = 1; ++ } else if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz); ++ if (core_if->dma_desc_enable != 0) ++ desc_sts = dev_if->in_desc_addr->status; ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ ++ if (((core_if->dma_desc_enable == 0) ++ && (deptsiz.b.xfersize == 0)) ++ || ((core_if->dma_desc_enable != 0) ++ && (desc_sts.b.bytes == 0))) { ++ req->actual = ep->dwc_ep.xfer_count; ++ /* Is a Zero Len Packet needed? */ ++ if (req->sent_zlp) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n"); ++#endif ++ req->sent_zlp = 0; ++ } ++ do_setup_out_status_phase(pcd); ++ } ++ } else { ++ /* ep0-OUT */ ++#ifdef DEBUG_EP0 ++ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz); ++ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ req->actual = ep->dwc_ep.xfer_count; ++ ++ /* Is a Zero Len Packet needed? */ ++ if (req->sent_zlp) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n"); ++#endif ++ req->sent_zlp = 0; ++ } ++ if (core_if->dma_desc_enable == 0) ++ do_setup_in_status_phase(pcd); ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++ dwc_otg_request_done(ep, req, 0); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ return 1; ++ } ++ return 0; ++} ++ ++#ifdef DWC_UTE_CFI ++/** ++ * This function calculates traverses all the CFI DMA descriptors and ++ * and accumulates the bytes that are left to be transfered. ++ * ++ * @return The total bytes left to transfered, or a negative value as failure ++ */ ++static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep) ++{ ++ int32_t ret = 0; ++ int i; ++ struct dwc_otg_dma_desc *ddesc = NULL; ++ struct cfi_ep *cfiep; ++ ++ /* See if the pcd_ep has its respective cfi_ep mapped */ ++ cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep); ++ if (!cfiep) { ++ CFI_INFO("%s: Failed to find ep\n", __func__); ++ return -1; ++ } ++ ++ ddesc = ep->dwc_ep.descs; ++ ++ for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) { ++ ++#if defined(PRINT_CFI_DMA_DESCS) ++ print_desc(ddesc, ep->ep.name, i); ++#endif ++ ret += ddesc->status.b.bytes; ++ ddesc++; ++ } ++ ++ if (ret) ++ CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__, ++ ret); ++ ++ return ret; ++} ++#endif ++ ++/** ++ * This function completes the request for the EP. If there are ++ * additional requests for the EP in the queue they will be started. ++ */ ++static void complete_ep(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++ deptsiz_data_t deptsiz; ++ dev_dma_desc_sts_t desc_sts; ++ dwc_otg_pcd_request_t *req = 0; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ uint32_t byte_count = 0; ++ int is_last = 0; ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT")); ++ ++ /* Get any pending requests */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ return; ++ } ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending); ++ ++ if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz); ++ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (deptsiz.b.xfersize == 0 ++ && deptsiz.b.pktcnt == 0) { ++ byte_count = ++ ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count; ++ ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%d-%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep. ++ is_in ? "IN" : "OUT"), ++ ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ ++ if (ep->dwc_ep.xfer_len < ++ ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer ++ (core_if, &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer ++ (core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ DWC_WARN ++ ("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ } ++ } else { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++#ifdef DWC_UTE_CFI ++ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, ++ ep->dwc_ep.buff_mode); ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ int residue; ++ ++ residue = cfi_calc_desc_residue(ep); ++ if (residue < 0) ++ return; ++ ++ byte_count = residue; ++ } else { ++#endif ++ for (i = 0; i < ep->dwc_ep.desc_cnt; ++ ++i) { ++ desc_sts = dma_desc->status; ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ if (byte_count == 0) { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len; ++ is_last = 1; ++ } else { ++ DWC_WARN("Incomplete transfer\n"); ++ } ++ } ++ } else { ++ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "%d-%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, ++ &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep-> ++ dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ DWC_WARN ++ ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++ desc_sts.d32 = 0; ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++#ifdef DWC_UTE_CFI ++ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, ++ ep->dwc_ep.buff_mode); ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ int residue; ++ residue = cfi_calc_desc_residue(ep); ++ if (residue < 0) ++ return; ++ byte_count = residue; ++ } else { ++#endif ++ ++ for (i = 0; i < ep->dwc_ep.desc_cnt; ++ ++i) { ++ desc_sts = dma_desc->status; ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++ ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len ++ - byte_count + ++ ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3); ++ is_last = 1; ++ } else { ++ deptsiz.d32 = 0; ++ deptsiz.d32 = ++ dwc_read_reg32(&out_ep_regs->doeptsiz); ++ ++ byte_count = (ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count - ++ deptsiz.b.xfersize); ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, ++ &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep-> ++ dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ } else { ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "addr %p, %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n", ++ &out_ep_regs->doeptsiz, ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ req->actual = ep->dwc_ep.cfi_req_len - byte_count; ++ } else { ++#endif ++ req->actual = ep->dwc_ep.xfer_count; ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ ++ dwc_otg_request_done(ep, req, 0); ++ ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ++ /* If there is a request in the queue start it. */ ++ start_next_request(ep); ++ } ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function BNA interrupt for Isochronous EPs ++ * ++ */ ++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ volatile uint32_t *addr; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ int i; ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num); ++ ++ if (dwc_ep->is_in) { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b_iso_in.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ } else { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b_iso_out.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ } ++ ++ if (dwc_ep->is_in == 0) { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]-> ++ doepctl; ++ } else { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ depctl.b.epena = 1; ++ dwc_modify_reg32(addr, depctl.d32, depctl.d32); ++} ++ ++/** ++ * This function sets latest iso packet information(non-PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ dma_addr_t dma_addr; ++ uint32_t offset; ++ ++ if (ep->proc_buf_num) ++ dma_addr = ep->dma_addr1; ++ else ++ dma_addr = ep->dma_addr0; ++ ++ if (ep->is_in) { ++ deptsiz.d32 = ++ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz); ++ offset = ep->data_per_frame; ++ } else { ++ deptsiz.d32 = ++ dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz); ++ offset = ++ ep->data_per_frame + ++ (0x4 & (0x4 - (ep->data_per_frame & 0x3))); ++ } ++ ++ if (!deptsiz.b.xfersize) { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ++ ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = 0; ++ } else { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ++ ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA; ++ } ++ ep->cur_pkt_addr += offset; ++ ep->cur_pkt_dma_addr += offset; ++ ep->cur_pkt++; ++} ++ ++/** ++ * This function sets latest iso packet information(DDMA mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ iso_pkt_info_t *iso_packet; ++ uint32_t data_per_desc; ++ uint32_t offset; ++ int i, j; ++ ++ iso_packet = dwc_ep->pkt_info; ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ offset = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep-> ++ data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + ++ (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Received data length */ ++ if (!sts.b_iso_out.rxbytes) { ++ iso_packet->length = ++ data_per_desc - ++ sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = ++ data_per_desc - ++ sts.b_iso_out.rxbytes + (4 - ++ dwc_ep-> ++ data_per_frame ++ % 4); ++ } ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ iso_packet++; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + ++ (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Received data length */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ iso_packet++; ++ dma_desc++; ++ } ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ /* Received data length */ ++ if (!sts.b_iso_out.rxbytes) { ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes + ++ (4 - dwc_ep->data_per_frame % 4); ++ } ++ ++ iso_packet->offset = offset; ++ } else { ++/** ISO IN EP */ ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso packet descriptor */ ++ iso_packet->status = ++ sts.b_iso_in.txsts + ++ (sts.b_iso_in.bs ^ BS_DMA_DONE); ++ if (iso_packet->status != 0) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ ++ } ++ /* Bytes has been transfered */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ ++ dma_desc++; ++ iso_packet++; ++ } ++ ++ sts.d32 = dma_desc->status.d32; ++ while (sts.b_iso_in.bs == BS_DMA_BUSY) { ++ sts.d32 = dma_desc->status.d32; ++ } ++ ++ /* Write status in iso packet descriptor ??? do be done with ERROR codes */ ++ iso_packet->status = ++ sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE); ++ if (iso_packet->status != 0) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Bytes has been transfered */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ } ++} ++ ++/** ++ * This function reinitialize DMA Descriptors for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) ++{ ++ int i, j; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dma_addr_t dma_ad; ++ volatile uint32_t *addr; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ uint32_t data_per_desc; ++ ++ if (dwc_ep->is_in == 0) { ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ } else { ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ ++ if (dwc_ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ } else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr1; ++ } ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep-> ++ data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dma_ad += data_per_desc; ++ dma_desc++; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = dwc_ep->proc_buf_num; ++ ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ } else { ++/** ISO IN EP */ ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ sts.b_iso_in.framenum = dwc_ep->next_frame; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ dma_ad += dwc_ep->data_per_frame; ++ dma_desc++; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = dwc_ep->proc_buf_num; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = ++ sts.b_iso_in.framenum + dwc_ep->bInterval * 1; ++ } ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * in case Iso out packet was dropped ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP for wihich transfer complete was asserted ++ * ++ */ ++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ uint32_t dma_addr; ++ uint32_t drp_pkt; ++ uint32_t drp_pkt_cnt; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ int i; ++ ++ deptsiz.d32 = ++ dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]-> ++ doeptsiz); ++ ++ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt; ++ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm); ++ ++ /* Setting dropped packets status */ ++ for (i = 0; i < drp_pkt_cnt; ++i) { ++ dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA; ++ drp_pkt++; ++ deptsiz.b.pktcnt--; ++ } ++ ++ if (deptsiz.b.pktcnt > 0) { ++ deptsiz.b.xfersize = ++ dwc_ep->xfer_len - (dwc_ep->pkt_cnt - ++ deptsiz.b.pktcnt) * dwc_ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 0; ++ } ++ ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, ++ deptsiz.d32); ++ ++ if (deptsiz.b.pktcnt > 0) { ++ if (dwc_ep->proc_buf_num) { ++ dma_addr = ++ dwc_ep->dma_addr1 + dwc_ep->xfer_len - ++ deptsiz.b.xfersize; ++ } else { ++ dma_addr = ++ dwc_ep->dma_addr0 + dwc_ep->xfer_len - ++ deptsiz.b.xfersize;; ++ } ++ ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]-> ++ doepdma, dma_addr); ++ ++ /** Re-enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]-> ++ doepctl, depctl.d32, depctl.d32); ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++/** ++ * This function sets iso packets information(PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ int i, j; ++ dma_addr_t dma_ad; ++ iso_pkt_info_t *packet_info = ep->pkt_info; ++ uint32_t offset; ++ uint32_t frame_data; ++ deptsiz_data_t deptsiz; ++ ++ if (ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = ep->dma_addr0; ++ } else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = ep->dma_addr1; ++ } ++ ++ if (ep->is_in) { ++ deptsiz.d32 = ++ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz); ++ } else { ++ deptsiz.d32 = ++ dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz); ++ } ++ ++ if (!deptsiz.b.xfersize) { ++ offset = 0; ++ for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) { ++ frame_data = ep->data_per_frame; ++ for (j = 0; j < ep->pkt_per_frm; ++j) { ++ ++ /* Packet status - is not set as initially ++ * it is set to 0 and if packet was sent ++ successfully, status field will remain 0*/ ++ ++ /* Bytes has been transfered */ ++ packet_info->length = ++ (ep->maxpacket < ++ frame_data) ? ep->maxpacket : frame_data; ++ ++ /* Received packet offset */ ++ packet_info->offset = offset; ++ offset += packet_info->length; ++ frame_data -= packet_info->length; ++ ++ packet_info++; ++ } ++ } ++ return 1; ++ } else { ++ /* This is a workaround for in case of Transfer Complete with ++ * PktDrpSts interrupts merging - in this case Transfer complete ++ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts ++ * set and with DOEPTSIZ register non zero. Investigations showed, ++ * that this happens when Out packet is dropped, but because of ++ * interrupts merging during first interrupt handling PktDrpSts ++ * bit is cleared and for next merged interrupts it is not reset. ++ * In this case SW hadles the interrupt as if PktDrpSts bit is set. ++ */ ++ if (ep->is_in) { ++ return 1; ++ } else { ++ return handle_iso_out_pkt_dropped(core_if, ep); ++ } ++ } ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * ++ * @param pcd The PCD ++ * @param ep The EP for which transfer complete was asserted ++ * ++ */ ++static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ uint8_t is_last = 0; ++ ++ if(ep->dwc_ep.next_frame == 0xffffffff) { ++ DWC_WARN("Next frame is not set!\n"); ++ return; ++ } ++ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ set_ddma_iso_pkts_info(core_if, dwc_ep); ++ reinit_ddma_iso_xfer(core_if, dwc_ep); ++ is_last = 1; ++ } else { ++ if (core_if->pti_enh_enable) { ++ if (set_iso_pkts_info(core_if, dwc_ep)) { ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ dwc_otg_iso_ep_start_buf_transfer ++ (core_if, dwc_ep); ++ is_last = 1; ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ++ dwc_ep); ++ } ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); ++ } ++ if (is_last) ++ dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle); ++} ++#endif /* DWC_EN_ISOC */ ++ ++/** ++ * This function handles EP0 Control transfers. ++ * ++ * The state of the control tranfers are tracked in ++ * ep0state. ++ */ ++static void handle_ep0(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ dev_dma_desc_sts_t desc_sts; ++ deptsiz0_data_t deptsiz; ++ uint32_t byte_count; ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ print_ep0_state(pcd); ++#endif ++ ++// DWC_PRINTF("HANDLE EP0\n"); ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ break; ++ ++ case EP0_IDLE: ++ pcd->request_config = 0; ++ ++ pcd_setup(pcd); ++ break; ++ ++ case EP0_IN_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ ++ if (core_if->dma_enable != 0) { ++ /* ++ * For EP0 we can only program 1 packet at a time so we ++ * need to do the make calculations after each complete. ++ * Call write_packet to make the calculations, as in ++ * slave mode, and use those values to determine if we ++ * can complete. ++ */ ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = ++ dwc_read_reg32(&core_if->dev_if-> ++ in_ep_regs[0]->dieptsiz); ++ byte_count = ++ ep0->dwc_ep.xfer_len - deptsiz.b.xfersize; ++ } else { ++ desc_sts = ++ core_if->dev_if->in_desc_addr->status; ++ byte_count = ++ ep0->dwc_ep.xfer_len - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else if (ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ case EP0_OUT_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ if (core_if->dma_enable != 0) { ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = ++ dwc_read_reg32(&core_if->dev_if-> ++ out_ep_regs[0]->doeptsiz); ++ byte_count = ++ ep0->dwc_ep.maxpacket - deptsiz.b.xfersize; ++ } else { ++ desc_sts = ++ core_if->dev_if->out_desc_addr->status; ++ byte_count = ++ ep0->dwc_ep.maxpacket - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else if (ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ case EP0_OUT_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n"); ++ ep0_complete_request(ep0); ++ pcd->ep0state = EP0_IDLE; ++ ep0->stopped = 1; ++ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */ ++ ++ /* Prepare for more SETUP Packets */ ++ if (core_if->dma_enable) { ++ ep0_out_start(core_if, pcd); ++ } ++ break; ++ ++ case EP0_STALL: ++ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n"); ++ break; ++ } ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++} ++ ++/** ++ * Restart transfer ++ */ ++static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if; ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++#ifdef DWC_EN_ISOC ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ return; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ core_if = GET_CORE_IF(pcd); ++ dev_if = core_if->dev_if; ++ ++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ ++ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x" ++ " stopped=%d\n", ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped); ++ /* ++ * If xfersize is 0 and pktcnt in not 0, resend the last packet. ++ */ ++ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 && ++ ep->dwc_ep.start_xfer_buff != 0) { ++ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) { ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } else { ++ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket; ++ /* convert packet size to dwords. */ ++ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } ++ ep->stopped = 0; ++ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x " ++ "xfer_len=%0x stopped=%d\n", ++ ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ++ ep->stopped); ++ if (epnum == 0) { ++ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); ++ } else { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } ++ } ++} ++ ++/** ++ * handle the IN EP disable interrupt. ++ */ ++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum, ++ dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl)); ++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); ++ ++ if (ep->stopped) { ++ /* Flush the Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ /* Clear the Global IN NP NAK */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ } else { ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n"); ++ } ++} ++ ++/** ++ * Handler for the IN EP timeout handshake interrupt. ++ */ ++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ ++#ifdef DEBUG ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ uint32_t num = 0; ++#endif ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ /* Disable the NP Tx Fifo Empty Interrrupt */ ++ if (!core_if->dma_enable) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ } ++ /** @todo NGS Check EP type. ++ * Implement for Periodic EPs */ ++ /* ++ * Non-periodic EP ++ */ ++ /* Enable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); ++ ++ /* Set Global IN NAK */ ++ dctl.b.sgnpinnak = 1; ++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ ep->stopped = 1; ++ ++#ifdef DEBUG ++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz); ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); ++#endif ++ ++#ifdef DISABLE_PERIODIC_EP ++ /* ++ * Set the NAK bit for this EP to ++ * start the disable process. ++ */ ++ diepctl.d32 = 0; ++ diepctl.b.snak = 1; ++ dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, ++ diepctl.d32); ++ ep->disabling = 1; ++ ep->stopped = 1; ++#endif ++} ++ ++/** ++ * Handler for the IN EP NAK interrupt. ++ */ ++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ diepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP Babble interrupt. ++ */ ++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "OUT EP Babble"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.babble = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NAK interrupt. ++ */ ++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NYET interrupt. ++ */ ++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nyet = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that an IN EP has a pending Interrupt. ++ * The sequence for handling the IN EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each IN EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DIEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Time-out Handshake" log error ++ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx ++ * FIFO. ++ * -# If "IN Token EP Mismatch" (disable, this is handled by EP ++ * Mismatch Interrupt) ++ */ ++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd) ++{ ++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ diepint_data_t diepint = {.d32=0}; \ ++ diepint.b.__intr = 1; \ ++ dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \ ++ diepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ diepint_data_t diepint = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ uint32_t ep_intr; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if); ++ ++ /* Service the Device IN interrupts for each endpoint */ ++ while (ep_intr) { ++ if (ep_intr & 0x1) { ++ uint32_t empty_msk; ++ /* Get EP pointer */ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ depctl.d32 = ++ dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl); ++ empty_msk = ++ dwc_read_reg32(&dev_if->dev_global_regs-> ++ dtknqr4_fifoemptymsk); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n", ++ epnum, empty_msk, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++ ++ diepint.d32 = ++ dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP %d Interrupt Register - 0x%x\n", epnum, ++ diepint.d32); ++ /* Transfer complete */ ++ if (diepint.b.xfercompl) { ++ /* Disable the NP Tx FIFO Empty ++ * Interrrupt */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if-> ++ core_global_regs-> ++ gintmsk, intr_mask.d32, ++ 0); ++ } else { ++ /* Disable the Tx FIFO Empty Interrupt for this EP */ ++ uint32_t fifoemptymsk = ++ 0x1 << dwc_ep->num; ++ dwc_modify_reg32(&core_if->dev_if-> ++ dev_global_regs-> ++ dtknqr4_fifoemptymsk, ++ fifoemptymsk, 0); ++ } ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, xfercompl); ++ ++ /* Complete the transfer */ ++ if (epnum == 0) { ++ handle_ep0(pcd); ++ } ++#ifdef DWC_EN_ISOC ++ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (!ep->stopped) ++ complete_iso_ep(pcd, ep); ++ } ++#endif /* DWC_EN_ISOC */ ++ else { ++ ++ complete_ep(ep); ++ } ++ } ++ /* Endpoint disable */ ++ if (diepint.b.epdisabled) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n", ++ epnum); ++ handle_in_ep_disable_intr(pcd, epnum); ++ ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, epdisabled); ++ } ++ /* AHB Error */ ++ if (diepint.b.ahberr) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN AHB Error\n", ++ epnum); ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, ahberr); ++ } ++ /* TimeOUT Handshake (non-ISOC IN EPs) */ ++ if (diepint.b.timeout) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN Time-out\n", ++ epnum); ++ handle_in_ep_timeout_intr(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, timeout); ++ } ++ /** IN Token received with TxF Empty */ ++ if (diepint.b.intktxfemp) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN TKN TxFifo Empty\n", ++ epnum); ++ if (!ep->stopped && epnum != 0) { ++ ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.intktxfemp = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&dev_if-> ++ dev_global_regs-> ++ diepeachintmsk ++ [epnum], ++ diepmsk.d32, ++ 0); ++ } else { ++ dwc_modify_reg32(&dev_if-> ++ dev_global_regs-> ++ diepmsk, ++ diepmsk.d32, ++ 0); ++ } ++ } else if (core_if->dma_desc_enable ++ && epnum == 0 ++ && pcd->ep0state == ++ EP0_OUT_STATUS_PHASE) { ++ // EP0 IN set STALL ++ depctl.d32 = ++ dwc_read_reg32(&dev_if-> ++ in_ep_regs[epnum]-> ++ diepctl); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ dwc_write_reg32(&dev_if-> ++ in_ep_regs[epnum]-> ++ diepctl, depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp); ++ } ++ /** IN Token Received with EP mismatch */ ++ if (diepint.b.intknepmis) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN TKN EP Mismatch\n", epnum); ++ CLEAR_IN_EP_INTR(core_if, epnum, intknepmis); ++ } ++ /** IN Endpoint NAK Effective */ ++ if (diepint.b.inepnakeff) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN EP NAK Effective\n", ++ epnum); ++ /* Periodic EP */ ++ if (ep->disabling) { ++ depctl.d32 = 0; ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ dwc_modify_reg32(&dev_if-> ++ in_ep_regs[epnum]-> ++ diepctl, depctl.d32, ++ depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff); ++ ++ } ++ ++ /** IN EP Tx FIFO Empty Intr */ ++ if (diepint.b.emptyintr) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d Tx FIFO Empty Intr \n", ++ epnum); ++ write_empty_tx_fifo(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, emptyintr); ++ ++ } ++ ++ /** IN EP BNA Intr */ ++ if (diepint.b.bna) { ++ CLEAR_IN_EP_INTR(core_if, epnum, bna); ++ if (core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if (dwc_ep->type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if (dwc_ep->next_frame != ++ 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna ++ (ep); ++ } else ++#endif /* DWC_EN_ISOC */ ++ { ++ dctl.d32 = ++ dwc_read_reg32(&dev_if-> ++ dev_global_regs-> ++ dctl); ++ ++ /* If Global Continue on BNA is disabled - disable EP */ ++ if (!dctl.b.gcontbna) { ++ depctl.d32 = 0; ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ dwc_modify_reg32 ++ (&dev_if-> ++ in_ep_regs[epnum]-> ++ diepctl, ++ depctl.d32, ++ depctl.d32); ++ } else { ++ start_next_request(ep); ++ } ++ } ++ } ++ } ++ /* NAK Interrutp */ ++ if (diepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n", ++ epnum); ++ handle_in_ep_nak_intr(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, nak); ++ } ++ } ++ epnum++; ++ ep_intr >>= 1; ++ } ++ ++ return 1; ++#undef CLEAR_IN_EP_INTR ++} ++ ++/** ++ * This interrupt indicates that an OUT EP has a pending Interrupt. ++ * The sequence for handling the OUT EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each OUT EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DOEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Setup Phase Done" process Setup Packet (See Standard USB ++ * Command Processing) ++ */ ++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd) ++{ ++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ doepint_data_t doepint = {.d32=0}; \ ++ doepint.b.__intr = 1; \ ++ dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \ ++ doepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ uint32_t ep_intr; ++ doepint_data_t doepint = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if); ++ ++ while (ep_intr) { ++ if (ep_intr & 0x1) { ++ /* Get EP pointer */ ++ ep = get_out_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++#endif ++ doepint.d32 = ++ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep); ++ ++ /* Transfer complete */ ++ if (doepint.b.xfercompl) { ++ ++ if (epnum == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, ++ xfercompl); ++ if (core_if->dma_desc_enable == 0 ++ || pcd->ep0state != EP0_IDLE) ++ handle_ep0(pcd); ++#ifdef DWC_EN_ISOC ++ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (doepint.b.pktdrpsts == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, ++ epnum, ++ xfercompl); ++ complete_iso_ep(pcd, ep); ++ } else { ++ ++ doepint_data_t doepint = {.d32 = ++ 0 }; ++ doepint.b.xfercompl = 1; ++ doepint.b.pktdrpsts = 1; ++ dwc_write_reg32(&core_if-> ++ dev_if-> ++ out_ep_regs ++ [epnum]-> ++ doepint, ++ doepint.d32); ++ if (handle_iso_out_pkt_dropped ++ (core_if, dwc_ep)) { ++ complete_iso_ep(pcd, ++ ep); ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++ } else { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, ++ xfercompl); ++ complete_ep(ep); ++ } ++ ++ } ++ ++ /* Endpoint disable */ ++ if (doepint.b.epdisabled) { ++ ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled); ++ } ++ /* AHB Error */ ++ if (doepint.b.ahberr) { ++ DWC_DEBUGPL(DBG_PCD, "EP%d OUT AHB Error\n", ++ epnum); ++ DWC_DEBUGPL(DBG_PCD, "EP DMA REG %d \n", ++ core_if->dev_if-> ++ out_ep_regs[epnum]->doepdma); ++ CLEAR_OUT_EP_INTR(core_if, epnum, ahberr); ++ } ++ /* Setup Phase Done (contorl EPs) */ ++ if (doepint.b.setup) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", ++ epnum); ++#endif ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ ++ handle_ep0(pcd); ++ } ++ ++ /** OUT EP BNA Intr */ ++ if (doepint.b.bna) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, bna); ++ if (core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if (dwc_ep->type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if (dwc_ep->next_frame != ++ 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna ++ (ep); ++ } else ++#endif /* DWC_EN_ISOC */ ++ { ++ dctl.d32 = ++ dwc_read_reg32(&dev_if-> ++ dev_global_regs-> ++ dctl); ++ ++ /* If Global Continue on BNA is disabled - disable EP */ ++ if (!dctl.b.gcontbna) { ++ doepctl.d32 = 0; ++ doepctl.b.snak = 1; ++ doepctl.b.epdis = 1; ++ dwc_modify_reg32 ++ (&dev_if-> ++ out_ep_regs ++ [epnum]->doepctl, ++ doepctl.d32, ++ doepctl.d32); ++ } else { ++ start_next_request(ep); ++ } ++ } ++ } ++ } ++ if (doepint.b.stsphsercvd) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd); ++ if (core_if->dma_desc_enable) { ++ do_setup_in_status_phase(pcd); ++ } ++ } ++ /* Babble Interrutp */ ++ if (doepint.b.babble) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n", ++ epnum); ++ handle_out_ep_babble_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, babble); ++ } ++ /* NAK Interrutp */ ++ if (doepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum); ++ handle_out_ep_nak_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, nak); ++ } ++ /* NYET Interrutp */ ++ if (doepint.b.nyet) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum); ++ handle_out_ep_nyet_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, nyet); ++ } ++ } ++ ++ epnum++; ++ ep_intr >>= 1; ++ } ++ ++ return 1; ++ ++#undef CLEAR_OUT_EP_INTR ++} ++ ++/** ++ * Incomplete ISO IN Transfer Interrupt. ++ * This interrupt indicates one of the following conditions occurred ++ * while transmitting an ISOC transaction. ++ * - Corrupted IN Token for ISOC EP. ++ * - Packet not complete in FIFO. ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Disable EP; when "Endpoint Disabled" interrupt is received ++ * Flush FIFO ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for (i = 1; i <= dev_if->num_in_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ deptsiz.d32 = ++ dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz); ++ depctl.d32 = ++ dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); ++ ++ if (depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = ++ dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF ++ (pcd), ++ dwc_ep); ++ } ++ } ++ } ++ ++#else ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "IN ISOC Incomplete"); ++ ++ intr_mask.b.incomplisoin = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++#endif //DWC_EN_ISOC ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoin = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Incomplete ISO OUT Transfer Interrupt. ++ * ++ * This interrupt indicates that the core has dropped an ISO OUT ++ * packet. The following conditions can be the cause: ++ * - FIFO Full, the entire packet would not fit in the FIFO. ++ * - CRC Error ++ * - Corrupted Token ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Read any data from the FIFO ++ * -# Disable EP. when "Endpoint Disabled" interrupt is received ++ * re-enable EP. ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd) ++{ ++ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for (i = 1; i <= dev_if->num_out_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if (pcd->out_ep[i].dwc_ep.active && ++ pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ deptsiz.d32 = ++ dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz); ++ depctl.d32 = ++ dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl); ++ ++ if (depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), ++ &pcd->out_ep[i].dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = ++ dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF ++ (pcd), ++ dwc_ep); ++ } ++ } ++ } ++#else ++ /** @todo implement ISR */ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "OUT ISOC Incomplete"); ++ ++ intr_mask.b.incomplisoout = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++#endif /* DWC_EN_ISOC */ ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoout = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Global IN NAK Effective interrupt. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ depctl_data_t diepctl_rd = {.d32 = 0 }; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n"); ++ ++ /* Disable all active IN EPs */ ++ diepctl.b.epdis = 1; ++ diepctl.b.snak = 1; ++ ++ for (i = 0; i <= dev_if->num_in_eps; i++) { ++ diepctl_rd.d32 = ++ dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); ++ if (diepctl_rd.b.epena) { ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, ++ diepctl.d32); ++ } ++ } ++ /* Disable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.ginnakeff = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * OUT NAK Effective. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "Global IN NAK Effective\n"); ++ /* Disable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.goutnakeff = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * PCD interrupt handler. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * ++ * All interrupt registers are processed from LSB to MSB. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++#ifdef VERBOSE ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++#endif ++ gintsts_data_t gintr_status; ++ int32_t retval = 0; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ dwc_read_reg32(&global_regs->gintsts), ++ dwc_read_reg32(&global_regs->gintmsk)); ++#endif ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_SPINLOCK(pcd->lock); ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ dwc_read_reg32(&global_regs->gintsts), ++ dwc_read_reg32(&global_regs->gintmsk)); ++#endif ++ ++ gintr_status.d32 = dwc_otg_read_core_intr(core_if); ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n", ++ __func__, gintr_status.d32); ++ ++ if (gintr_status.b.sofintr) { ++ retval |= dwc_otg_pcd_handle_sof_intr(pcd); ++ } ++ if (gintr_status.b.rxstsqlvl) { ++ retval |= ++ dwc_otg_pcd_handle_rx_status_q_level_intr(pcd); ++ } ++ if (gintr_status.b.nptxfempty) { ++ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd); ++ } ++ if (gintr_status.b.ginnakeff) { ++ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd); ++ } ++ if (gintr_status.b.goutnakeff) { ++ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd); ++ } ++ if (gintr_status.b.i2cintr) { ++ retval |= dwc_otg_pcd_handle_i2c_intr(pcd); ++ } ++ if (gintr_status.b.erlysuspend) { ++ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd); ++ } ++ if (gintr_status.b.usbreset) { ++ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd); ++ } ++ if (gintr_status.b.enumdone) { ++ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd); ++ } ++ if (gintr_status.b.isooutdrop) { ++ retval |= ++ dwc_otg_pcd_handle_isoc_out_packet_dropped_intr ++ (pcd); ++ } ++ if (gintr_status.b.eopframe) { ++ retval |= ++ dwc_otg_pcd_handle_end_periodic_frame_intr(pcd); ++ } ++ if (gintr_status.b.epmismatch) { ++ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if); ++ } ++ if (gintr_status.b.inepint) { ++ if (!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.outepintr) { ++ if (!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.incomplisoin) { ++ retval |= ++ dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd); ++ } ++ if (gintr_status.b.incomplisoout) { ++ retval |= ++ dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd); ++ } ++ ++ /* In MPI mode De vice Endpoints intterrupts are asserted ++ * without setting outepintr and inepint bits set, so these ++ * Interrupt handlers are called without checking these bit-fields ++ */ ++ if (core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__, ++ dwc_read_reg32(&global_regs->gintsts)); ++#endif ++ DWC_SPINUNLOCK(pcd->lock); ++ } ++ return retval; ++} ++ ++#endif /* DWC_HOST_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,1288 @@ ++ /* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $ ++ * $Revision: #7 $ ++ * $Date: 2009/04/03 $ ++ * $Change: 1225160 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements the Peripheral Controller Driver. ++ * ++ * The Peripheral Controller Driver (PCD) is responsible for ++ * translating requests from the Function Driver into the appropriate ++ * actions on the DWC_otg controller. It isolates the Function Driver ++ * from the specifics of the controller by providing an API to the ++ * Function Driver. ++ * ++ * The Peripheral Controller Driver for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. ++ * (Gadget Driver is the Linux terminology for a Function Driver.) ++ * ++ * The Linux Gadget API is defined in the header file ++ * . The USB EP operations API is ++ * defined in the structure usb_ep_ops and the USB ++ * Controller API is defined in the structure ++ * usb_gadget_ops. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if defined(LM_INTERFACE) ++//# include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++#include ++#else ++/* by 2.6.31, at least, the location of some headers has changed ++*/ ++#include ++#endif ++ ++#elif defined(PLATFORM_INTERFACE) ++#include ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++#include ++#include ++#include ++#else ++/* by 2.6.31, at least, the location of some headers has changed ++*/ ++#include ++#include ++#include ++#endif ++ ++#include ++ ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_dbg.h" ++ ++static struct gadget_wrapper { ++ dwc_otg_pcd_t *pcd; ++ ++ struct usb_gadget gadget; ++ struct usb_gadget_driver *driver; ++ ++ struct usb_ep ep0; ++ struct usb_ep in_ep[16]; ++ struct usb_ep out_ep[16]; ++ ++} *gadget_wrapper; ++ ++/* Display the contents of the buffer */ ++extern void dump_msg(const u8 * buf, unsigned int length); ++ ++/* USB Endpoint Operations */ ++/* ++ * The following sections briefly describe the behavior of the Gadget ++ * API endpoint operations implemented in the DWC_otg driver ++ * software. Detailed descriptions of the generic behavior of each of ++ * these functions can be found in the Linux header file ++ * include/linux/usb_gadget.h. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper ++ * function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper ++ * functions. Within each section, the corresponding DWC_otg PCD ++ * function name is specified. ++ * ++ */ ++ ++/** ++ * This function is called by the Gadget Driver for each EP to be ++ * configured for the current configuration (SET_CONFIGURATION). ++ * ++ * This function initializes the dwc_otg_ep_t data structure, and then ++ * calls dwc_otg_ep_activate. ++ */ ++static int ep_enable(struct usb_ep *usb_ep, ++ const struct usb_endpoint_descriptor *ep_desc) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc); ++ ++ if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) { ++ DWC_WARN("%s, bad ep or descriptor\n", __func__); ++ return -EINVAL; ++ } ++ if (usb_ep == &gadget_wrapper->ep0) { ++ DWC_WARN("%s, bad ep(0)\n", __func__); ++ return -EINVAL; ++ } ++ ++ /* Check FIFO size? */ ++ if (!ep_desc->wMaxPacketSize) { ++ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); ++ return -ERANGE; ++ } ++ ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd, ++ (const uint8_t *)ep_desc, ++ (void *)usb_ep); ++ if (retval) { ++ DWC_WARN("dwc_otg_pcd_ep_enable failed\n"); ++ return -EINVAL; ++ } ++ ++ usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize); ++ ++ return 0; ++} ++ ++/** ++ * This function is called when an EP is disabled due to disconnect or ++ * change in configuration. Any pending requests will terminate with a ++ * status of -ESHUTDOWN. ++ * ++ * This function modifies the dwc_otg_ep_t data structure for this EP, ++ * and then calls dwc_otg_ep_deactivate. ++ */ ++static int ep_disable(struct usb_ep *usb_ep) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep); ++ if (!usb_ep) { ++ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, ++ usb_ep ? usb_ep->name : NULL); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep); ++ if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function allocates a request object to use with the specified ++ * endpoint. ++ * ++ * @param ep The endpoint to be used with with the request ++ * @param gfp_flags the GFP_* flags to use. ++ */ ++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, ++ gfp_t gfp_flags) ++{ ++ struct usb_request *usb_req; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags); ++ if (0 == ep) { ++ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); ++ return 0; ++ } ++ usb_req = kmalloc(sizeof(*usb_req), gfp_flags); ++ if (0 == usb_req) { ++ DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n"); ++ return 0; ++ } ++ memset(usb_req, 0, sizeof(*usb_req)); ++ usb_req->dma = DWC_INVALID_DMA_ADDR; ++ ++ return usb_req; ++} ++ ++/** ++ * This function frees a request object. ++ * ++ * @param ep The endpoint associated with the request ++ * @param req The request being freed ++ */ ++static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req); ++ ++ if (0 == ep || 0 == req) { ++ DWC_WARN("%s() %s\n", __func__, ++ "Invalid ep or req argument!\n"); ++ return; ++ } ++ ++ kfree(req); ++} ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++/** ++ * This function allocates an I/O buffer to be used for a transfer ++ * to/from the specified endpoint. ++ * ++ * @param usb_ep The endpoint to be used with with the request ++ * @param bytes The desired number of bytes for the buffer ++ * @param dma Pointer to the buffer's DMA address; must be valid ++ * @param gfp_flags the GFP_* flags to use. ++ * @return address of a new buffer or null is buffer could not be allocated. ++ */ ++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, ++ dma_addr_t * dma, gfp_t gfp_flags) ++{ ++ void *buf; ++ dwc_otg_pcd_t *pcd = 0; ++ ++ pcd = gadget_wrapper->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, ++ dma, gfp_flags); ++ ++ /* Check dword alignment */ ++ if ((bytes & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer size is not a multiple of" ++ "DWORD size (%d)", __func__, bytes); ++ } ++ ++ buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags); ++ ++ /* Check dword alignment */ ++ if (((int)buf & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer is not DWORD aligned (%p)", ++ __func__, buf); ++ } ++ ++ return buf; ++} ++ ++/** ++ * This function frees an I/O buffer that was allocated by alloc_buffer. ++ * ++ * @param usb_ep the endpoint associated with the buffer ++ * @param buf address of the buffer ++ * @param dma The buffer's DMA address ++ * @param bytes The number of bytes of the buffer ++ */ ++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, ++ dma_addr_t dma, unsigned bytes) ++{ ++ dwc_otg_pcd_t *pcd = 0; ++ ++ pcd = gadget_wrapper->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes); ++ ++ dma_free_coherent(NULL, bytes, buf, dma); ++} ++#endif ++ ++/** ++ * This function is used to submit an I/O Request to an EP. ++ * ++ * - When the request completes the request's completion callback ++ * is called to return the request to the driver. ++ * - An EP, except control EPs, may have multiple requests ++ * pending. ++ * - Once submitted the request cannot be examined or modified. ++ * - Each request is turned into one or more packets. ++ * - A BULK EP can queue any amount of data; the transfer is ++ * packetized. ++ * - Zero length Packets are specified with the request 'zero' ++ * flag. ++ */ ++static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req, ++ gfp_t gfp_flags) ++{ ++ dwc_otg_pcd_t *pcd; ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n", ++ __func__, usb_ep, usb_req, gfp_flags); ++ ++ if (!usb_req || !usb_req->complete || !usb_req->buf) { ++ DWC_WARN("bad params\n"); ++ return -EINVAL; ++ } ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ pcd = gadget_wrapper->pcd; ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", ++ gadget_wrapper->gadget.speed); ++ DWC_WARN("bogus device state\n"); ++ return -ESHUTDOWN; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", ++ usb_ep->name, usb_req, usb_req->length, usb_req->buf); ++ ++ usb_req->status = -EINPROGRESS; ++ usb_req->actual = 0; ++ ++ retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, usb_req->dma, ++ usb_req->length, usb_req->zero, usb_req, ++ gfp_flags == GFP_ATOMIC ? 1 : 0); ++ if (retval) { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * This function cancels an I/O request from an EP. ++ */ ++static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req); ++ ++ if (!usb_ep || !usb_req) { ++ DWC_WARN("bad argument\n"); ++ return -EINVAL; ++ } ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("bogus device state\n"); ++ return -ESHUTDOWN; ++ } ++ if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * usb_ep_set_halt stalls an endpoint. ++ * ++ * usb_ep_clear_halt clears an endpoint halt and resets its data ++ * toggle. ++ * ++ * Both of these functions are implemented with the same underlying ++ * function. The behavior depends on the value argument. ++ * ++ * @param[in] usb_ep the Endpoint to halt or clear halt. ++ * @param[in] value ++ * - 0 means clear_halt. ++ * - 1 means set_halt, ++ * - 2 means clear stall lock flag. ++ * - 3 means set stall lock flag. ++ */ ++static int ep_halt(struct usb_ep *usb_ep, int value) ++{ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value); ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value); ++ if (retval == -DWC_E_AGAIN) { ++ return -EAGAIN; ++ } else if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++#if 0 ++/** ++ * ep_wedge: sets the halt feature and ignores clear requests ++ * ++ * @usb_ep: the endpoint being wedged ++ * ++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) ++ * requests. If the gadget driver clears the halt status, it will ++ * automatically unwedge the endpoint. ++ * ++ * Returns zero on success, else negative errno. * ++ * Check usb_ep_set_wedge() at "usb_gadget.h" for details ++ */ ++static int ep_wedge(struct usb_ep *usb_ep) ++{ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name); ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep); ++ if (retval == -DWC_E_AGAIN) { ++ retval = -EAGAIN; ++ } else if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++#endif ++ ++#ifdef DWC_EN_ISOC ++/** ++ * This function is used to submit an ISOC Transfer Request to an EP. ++ * ++ * - Every time a sync period completes the request's completion callback ++ * is called to provide data to the gadget driver. ++ * - Once submitted the request cannot be modified. ++ * - Each request is turned into periodic data packets untill ISO ++ * Transfer is stopped.. ++ */ ++static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, ++ gfp_t gfp_flags) ++{ ++ int retval = 0; ++ ++ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { ++ DWC_WARN("bad params\n"); ++ return -EINVAL; ++ } ++ ++ if (!usb_ep) { ++ DWC_PRINTF("bad params\n"); ++ return -EINVAL; ++ } ++ ++ req->status = -EINPROGRESS; ++ ++ retval = ++ dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0, ++ req->buf1, req->dma0, req->dma1, ++ req->sync_frame, req->data_pattern_frame, ++ req->data_per_frame, ++ req->flags & USB_REQ_ISO_ASAP ? -1 : req-> ++ start_frame, req->buf_proc_intrvl, req, ++ gfp_flags == GFP_ATOMIC ? 1 : 0); ++ ++ if (retval) { ++ return -EINVAL; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function stops ISO EP Periodic Data Transfer. ++ */ ++static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) ++{ ++ int retval = 0; ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ } ++ ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", ++ gadget_wrapper->gadget.speed); ++ DWC_WARN("bogus device state\n"); ++ } ++ ++ dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req); ++ if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep, ++ int packets, gfp_t gfp_flags) ++{ ++ struct usb_iso_request *pReq = NULL; ++ uint32_t req_size; ++ ++ req_size = sizeof(struct usb_iso_request); ++ req_size += ++ (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); ++ ++ pReq = kmalloc(req_size, gfp_flags); ++ if (!pReq) { ++ DWC_WARN("Can't allocate Iso Request\n"); ++ return 0; ++ } ++ pReq->iso_packet_desc0 = (void *)(pReq + 1); ++ ++ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; ++ ++ return pReq; ++} ++ ++static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) ++{ ++ kfree(req); ++} ++ ++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = { ++ .ep_ops = { ++ .enable = ep_enable, ++ .disable = ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++ ++ .queue = ep_queue, ++ .dequeue = ep_dequeue, ++ ++ .set_halt = ep_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ }, ++ .iso_ep_start = iso_ep_start, ++ .iso_ep_stop = iso_ep_stop, ++ .alloc_iso_request = alloc_iso_request, ++ .free_iso_request = free_iso_request, ++}; ++ ++#else ++ ++ int (*enable) (struct usb_ep *ep, ++ const struct usb_endpoint_descriptor *desc); ++ int (*disable) (struct usb_ep *ep); ++ ++ struct usb_request *(*alloc_request) (struct usb_ep *ep, ++ gfp_t gfp_flags); ++ void (*free_request) (struct usb_ep *ep, struct usb_request *req); ++ ++ int (*queue) (struct usb_ep *ep, struct usb_request *req, ++ gfp_t gfp_flags); ++ int (*dequeue) (struct usb_ep *ep, struct usb_request *req); ++ ++ int (*set_halt) (struct usb_ep *ep, int value); ++ int (*set_wedge) (struct usb_ep *ep); ++ ++ int (*fifo_status) (struct usb_ep *ep); ++ void (*fifo_flush) (struct usb_ep *ep); ++static struct usb_ep_ops dwc_otg_pcd_ep_ops = { ++ .enable = ep_enable, ++ .disable = ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#else ++ /* .set_wedge = ep_wedge, */ ++ .set_wedge = NULL, /* uses set_halt instead */ ++#endif ++ ++ .queue = ep_queue, ++ .dequeue = ep_dequeue, ++ ++ .set_halt = ep_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ ++}; ++ ++#endif /* _EN_ISOC_ */ ++/* Gadget Operations */ ++/** ++ * The following gadget operations will be implemented in the DWC_otg ++ * PCD. Functions in the API that are not described below are not ++ * implemented. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the ++ * wrapper function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper functions ++ * (except for ioctl, which doesn't have a wrapper function). Within ++ * each section, the corresponding DWC_otg PCD function name is ++ * specified. ++ * ++ */ ++ ++/** ++ *Gets the USB Frame number of the last SOF. ++ */ ++static int get_frame_number(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } ++ ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ return dwc_otg_pcd_get_frame_number(d->pcd); ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++static int test_lpm_enabled(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ ++ return dwc_otg_pcd_is_lpm_enabled(d->pcd); ++} ++#endif ++ ++/** ++ * Initiates Session Request Protocol (SRP) to wakeup the host if no ++ * session is in progress. If a session is already in progress, but ++ * the device is suspended, remote wakeup signaling is started. ++ * ++ */ ++static int wakeup(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } else { ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ } ++ dwc_otg_pcd_wakeup(d->pcd); ++ return 0; ++} ++ ++static const struct usb_gadget_ops dwc_otg_pcd_ops = { ++ .get_frame = get_frame_number, ++ .wakeup = wakeup, ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ .lpm_support = test_lpm_enabled, ++#endif ++ // current versions must always be self-powered ++}; ++ ++static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ if (gadget_wrapper->driver && gadget_wrapper->driver->setup) { ++ retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget, ++ (struct usb_ctrlrequest ++ *)bytes); ++ } ++ ++ if (retval == -ENOTSUPP) { ++ retval = -DWC_E_NOT_SUPPORTED; ++ } else if (retval < 0) { ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++#ifdef DWC_EN_ISOC ++static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int proc_buf_num) ++{ ++ int i, packet_count; ++ struct usb_gadget_iso_packet_descriptor *iso_packet = 0; ++ struct usb_iso_request *iso_req = req_handle; ++ ++ if (proc_buf_num) { ++ iso_packet = iso_req->iso_packet_desc1; ++ } else { ++ iso_packet = iso_req->iso_packet_desc0; ++ } ++ packet_count = ++ dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle); ++ for (i = 0; i < packet_count; ++i) { ++ int status; ++ int actual; ++ int offset; ++ dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle, ++ i, &status, &actual, &offset); ++ switch (status) { ++ case -DWC_E_NO_DATA: ++ status = -ENODATA; ++ break; ++ default: ++ if (status) { ++ DWC_PRINTF("unknown status in isoc packet\n"); ++ } ++ ++ } ++ iso_packet[i].status = status; ++ iso_packet[i].offset = offset; ++ iso_packet[i].actual_length = actual; ++ } ++ ++ iso_req->status = 0; ++ iso_req->process_buffer(ep_handle, iso_req); ++ ++ return 0; ++} ++#endif /* DWC_EN_ISOC */ ++ ++static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, uint32_t actual) ++{ ++ struct usb_request *req = (struct usb_request *)req_handle; ++ ++ if (req && req->complete) { ++ switch (status) { ++ case -DWC_E_SHUTDOWN: ++ req->status = -ESHUTDOWN; ++ break; ++ case -DWC_E_RESTART: ++ req->status = -ECONNRESET; ++ break; ++ case -DWC_E_INVALID: ++ req->status = -EINVAL; ++ break; ++ case -DWC_E_TIMEOUT: ++ req->status = -ETIMEDOUT; ++ break; ++ default: ++ req->status = status; ++ ++ } ++ req->actual = actual; ++ req->complete(ep_handle, req); ++ } ++ ++ return 0; ++} ++ ++static int _connect(dwc_otg_pcd_t * pcd, int speed) ++{ ++ gadget_wrapper->gadget.speed = speed; ++ return 0; ++} ++ ++static int _disconnect(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) { ++ gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget); ++ } ++ return 0; ++} ++ ++static int _resume(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->resume) { ++ gadget_wrapper->driver->resume(&gadget_wrapper->gadget); ++ } ++ ++ return 0; ++} ++ ++static int _suspend(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) { ++ gadget_wrapper->driver->suspend(&gadget_wrapper->gadget); ++ } ++ return 0; ++} ++ ++/** ++ * This function updates the otg values in the gadget structure. ++ */ ++static int _hnp_changed(dwc_otg_pcd_t * pcd) ++{ ++ ++ if (!gadget_wrapper->gadget.is_otg) ++ return 0; ++ ++ gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd); ++ gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd); ++ gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd); ++ return 0; ++} ++ ++static int _reset(dwc_otg_pcd_t * pcd) ++{ ++ return 0; ++} ++ ++#ifdef DWC_UTE_CFI ++static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req) ++{ ++ int retval = -DWC_E_INVALID; ++ if (gadget_wrapper->driver->cfi_feature_setup) { ++ retval = ++ gadget_wrapper->driver->cfi_feature_setup(&gadget_wrapper-> ++ gadget, ++ (struct ++ cfi_usb_ctrlrequest ++ *)cfi_req); ++ } ++ ++ return retval; ++} ++#endif ++ ++static const struct dwc_otg_pcd_function_ops fops = { ++ .complete = _complete, ++#ifdef DWC_EN_ISOC ++ .isoc_complete = _isoc_complete, ++#endif ++ .setup = _setup, ++ .disconnect = _disconnect, ++ .connect = _connect, ++ .resume = _resume, ++ .suspend = _suspend, ++ .hnp_changed = _hnp_changed, ++ .reset = _reset, ++#ifdef DWC_UTE_CFI ++ .cfi_setup = _cfi_setup, ++#endif ++}; ++ ++/** ++ * This function is the top level PCD interrupt handler. ++ */ ++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev) ++{ ++ dwc_otg_pcd_t *pcd = dev; ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_pcd_handle_intr(pcd); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function initialized the usb_ep structures to there default ++ * state. ++ * ++ * @param d Pointer on gadget_wrapper. ++ */ ++void gadget_add_eps(struct gadget_wrapper *d) ++{ ++ static const char *names[] = { ++ ++ "ep0", ++ "ep1in", ++ "ep2in", ++ "ep3in", ++ "ep4in", ++ "ep5in", ++ "ep6in", ++ "ep7in", ++ "ep8in", ++ "ep9in", ++ "ep10in", ++ "ep11in", ++ "ep12in", ++ "ep13in", ++ "ep14in", ++ "ep15in", ++ "ep1out", ++ "ep2out", ++ "ep3out", ++ "ep4out", ++ "ep5out", ++ "ep6out", ++ "ep7out", ++ "ep8out", ++ "ep9out", ++ "ep10out", ++ "ep11out", ++ "ep12out", ++ "ep13out", ++ "ep14out", ++ "ep15out" ++ }; ++ ++ int i; ++ struct usb_ep *ep; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__); ++ ++ INIT_LIST_HEAD(&d->gadget.ep_list); ++ d->gadget.ep0 = &d->ep0; ++ d->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ INIT_LIST_HEAD(&d->gadget.ep0->ep_list); ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &d->ep0; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[0]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ dwc_otg_pcd_ep_enable(d->pcd, NULL, ep); ++ ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ ++ /** ++ * Initialize the EP structures. ++ */ ++ ++ for (i = 0; i < 15; i++) { ++ ep = &d->in_ep[i]; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[i + 1]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ } ++ ++ for (i = 0; i < 15; i++) { ++ ep = &d->out_ep[i]; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[15 + i + 1]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ } ++ ++ /* remove ep0 from the list. There is a ep0 pointer. */ ++ list_del_init(&d->ep0.ep_list); ++ ++ d->ep0.maxpacket = MAX_EP0_SIZE; ++} ++ ++/** ++ * This function releases the Gadget device. ++ * required by device_unregister(). ++ * ++ * @todo Should this do something? Should it free the PCD? ++ */ ++static void dwc_otg_pcd_gadget_release(struct device *dev) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); ++} ++ ++static struct gadget_wrapper *alloc_wrapper( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ) ++{ ++#ifdef LM_INTERFACE ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ static char pcd_name[] = "dwc_otg_pcd"; ++ ++ struct gadget_wrapper *d; ++ int retval; ++ ++ d = dwc_alloc(sizeof(*d)); ++ if (d == NULL) { ++ return NULL; ++ } ++ ++ memset(d, 0, sizeof(*d)); ++ ++ d->gadget.name = pcd_name; ++ d->pcd = otg_dev->pcd; ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ strcpy(d->gadget.dev.bus_id, "gadget"); ++#else ++ /*d->gadget.dev.bus = NULL;*/ ++ d->gadget.dev.init_name = "gadget"; ++#endif ++ d->gadget.dev.parent = &_dev->dev; ++ d->gadget.dev.release = dwc_otg_pcd_gadget_release; ++ d->gadget.ops = &dwc_otg_pcd_ops; ++ d->gadget.is_dualspeed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd); ++ d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd); ++ ++ d->driver = 0; ++ /* Register the gadget device */ ++ retval = device_register(&d->gadget.dev); ++ if (retval != 0) { ++ DWC_ERROR("device_register failed\n"); ++ dwc_free(d); ++ return NULL; ++ } ++ ++ return d; ++} ++ ++static void free_wrapper(struct gadget_wrapper *d) ++{ ++ if (d->driver) { ++ /* should have been done already by driver model core */ ++ DWC_WARN("driver '%s' is still registered\n", ++ d->driver->driver.name); ++ usb_gadget_unregister_driver(d->driver); ++ } ++ ++ device_unregister(&d->gadget.dev); ++ dwc_free(d); ++} ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++int pcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ) ++ ++{ ++#ifdef LM_INTERFACE ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ int devirq; ++ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev); ++ ++ otg_dev->pcd = dwc_otg_pcd_init(otg_dev->core_if); ++ ++ if (!otg_dev->pcd) { ++ DWC_ERROR("dwc_otg_pcd_init failed\n"); ++ return -ENOMEM; ++ } ++ ++ gadget_wrapper = alloc_wrapper(_dev); ++ ++ /* ++ * Initialize EP structures ++ */ ++ gadget_add_eps(gadget_wrapper); ++ ++ /* ++ * Setup interupt handler ++ */ ++#ifdef PLATFORM_INTERFACE ++ devirq = platform_get_irq(_dev, 0); ++#else ++ devirq = _dev->irq; ++#endif ++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", devirq); ++ retval = request_irq(devirq, dwc_otg_pcd_irq, ++ IRQF_SHARED, gadget_wrapper->gadget.name, ++ otg_dev->pcd); ++ if (retval != 0) { ++ DWC_ERROR("request of irq%d failed\n", devirq); ++ free_wrapper(gadget_wrapper); ++ return -EBUSY; ++ } ++ ++ dwc_otg_pcd_start(gadget_wrapper->pcd, &fops); ++ ++ return retval; ++} ++ ++/** ++ * Cleanup the PCD. ++ */ ++void pcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ) ++{ ++#ifdef LM_INTERFACE ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ dwc_otg_pcd_t *pcd = otg_dev->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); ++ ++ /* ++ * Free the IRQ ++ */ ++#ifdef PLATFORM_INTERFACE ++ free_irq(platform_get_irq(_dev, 0), pcd); ++#else ++ free_irq(_dev->irq, pcd); ++#endif ++ dwc_otg_pcd_remove(otg_dev->pcd); ++ free_wrapper(gadget_wrapper); ++ otg_dev->pcd = 0; ++} ++ ++/** ++ * This function registers a gadget driver with the PCD. ++ * ++ * When a driver is successfully registered, it will receive control ++ * requests including set_configuration(), which enables non-control ++ * requests. then usb traffic follows until a disconnect is reported. ++ * then a host may connect again, or the driver might get unbound. ++ * ++ * @param driver The driver being registered ++ */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ++int usb_gadget_register_driver(struct usb_gadget_driver *driver) ++#else ++int usb_gadget_probe_driver(struct usb_gadget_driver *driver, ++ int (*bind)(struct usb_gadget *)) ++#endif ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", ++ driver->driver.name); ++ ++ if (!driver || driver->speed == USB_SPEED_UNKNOWN || ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ++ !driver->bind || ++#else ++ !bind || ++#endif ++ !driver->unbind || !driver->disconnect || !driver->setup) { ++ DWC_DEBUGPL(DBG_PCDV, "EINVAL\n"); ++ return -EINVAL; ++ } ++ if (gadget_wrapper == 0) { ++ DWC_DEBUGPL(DBG_PCDV, "ENODEV\n"); ++ return -ENODEV; ++ } ++ if (gadget_wrapper->driver != 0) { ++ DWC_DEBUGPL(DBG_PCDV, "EBUSY (%p)\n", gadget_wrapper->driver); ++ return -EBUSY; ++ } ++ ++ /* hook up the driver */ ++ gadget_wrapper->driver = driver; ++ gadget_wrapper->gadget.dev.driver = &driver->driver; ++ ++ DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name); ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ++ retval = driver->bind(&gadget_wrapper->gadget); ++#else ++ retval = bind(&gadget_wrapper->gadget); ++#endif ++ if (retval) { ++ DWC_ERROR("bind to driver %s --> error %d\n", ++ driver->driver.name, retval); ++ gadget_wrapper->driver = 0; ++ gadget_wrapper->gadget.dev.driver = 0; ++ return retval; ++ } ++ DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n", ++ driver->driver.name); ++ return 0; ++} ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ++EXPORT_SYMBOL(usb_gadget_register_driver); ++#else ++EXPORT_SYMBOL(usb_gadget_probe_driver); ++#endif ++ ++/** ++ * This function unregisters a gadget driver ++ * ++ * @param driver The driver being unregistered ++ */ ++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) ++{ ++ //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver); ++ ++ if (gadget_wrapper == 0) { ++ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__, ++ -ENODEV); ++ return -ENODEV; ++ } ++ if (driver == 0 || driver != gadget_wrapper->driver) { ++ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__, ++ -EINVAL); ++ return -EINVAL; ++ } ++ ++ driver->unbind(&gadget_wrapper->gadget); ++ gadget_wrapper->driver = 0; ++ ++ DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", driver->driver.name); ++ return 0; ++} ++ ++EXPORT_SYMBOL(usb_gadget_unregister_driver); ++ ++#endif /* DWC_HOST_ONLY */ +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_regs.h bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_regs.h +--- upstream-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_regs.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/dwc_otg_regs.h 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,2237 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ ++ * $Revision: #76 $ ++ * $Date: 2009/04/02 $ ++ * $Change: 1224216 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_REGS_H__ ++#define __DWC_OTG_REGS_H__ ++ ++#include "dwc_otg_core_if.h" ++ ++/** ++ * @file ++ * ++ * This file contains the data structures for accessing the DWC_otg core registers. ++ * ++ * The application interfaces with the HS OTG core by reading from and ++ * writing to the Control and Status Register (CSR) space through the ++ * AHB Slave interface. These registers are 32 bits wide, and the ++ * addresses are 32-bit-block aligned. ++ * CSRs are classified as follows: ++ * - Core Global Registers ++ * - Device Mode Registers ++ * - Device Global Registers ++ * - Device Endpoint Specific Registers ++ * - Host Mode Registers ++ * - Host Global Registers ++ * - Host Port CSRs ++ * - Host Channel Specific Registers ++ * ++ * Only the Core Global registers can be accessed in both Device and ++ * Host modes. When the HS OTG core is operating in one mode, either ++ * Device or Host, the application must not access registers from the ++ * other mode. When the core switches from one mode to another, the ++ * registers in the new mode of operation must be reprogrammed as they ++ * would be after a power-on reset. ++ */ ++ ++/****************************************************************************/ ++/** DWC_otg Core registers . ++ * The dwc_otg_core_global_regs structure defines the size ++ * and relative field offsets for the Core Global registers. ++ */ ++typedef struct dwc_otg_core_global_regs { ++ /** OTG Control and Status Register. Offset: 000h */ ++ volatile uint32_t gotgctl; ++ /** OTG Interrupt Register. Offset: 004h */ ++ volatile uint32_t gotgint; ++ /**Core AHB Configuration Register. Offset: 008h */ ++ volatile uint32_t gahbcfg; ++ ++#define DWC_GLBINTRMASK 0x0001 ++#define DWC_DMAENABLE 0x0020 ++#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 ++#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 ++#define DWC_PTXEMPTYLVL_EMPTY 0x0100 ++#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 ++ ++ /**Core USB Configuration Register. Offset: 00Ch */ ++ volatile uint32_t gusbcfg; ++ /**Core Reset Register. Offset: 010h */ ++ volatile uint32_t grstctl; ++ /**Core Interrupt Register. Offset: 014h */ ++ volatile uint32_t gintsts; ++ /**Core Interrupt Mask Register. Offset: 018h */ ++ volatile uint32_t gintmsk; ++ /**Receive Status Queue Read Register (Read Only). Offset: 01Ch */ ++ volatile uint32_t grxstsr; ++ /**Receive Status Queue Read & POP Register (Read Only). Offset: 020h*/ ++ volatile uint32_t grxstsp; ++ /**Receive FIFO Size Register. Offset: 024h */ ++ volatile uint32_t grxfsiz; ++ /**Non Periodic Transmit FIFO Size Register. Offset: 028h */ ++ volatile uint32_t gnptxfsiz; ++ /**Non Periodic Transmit FIFO/Queue Status Register (Read ++ * Only). Offset: 02Ch */ ++ volatile uint32_t gnptxsts; ++ /**I2C Access Register. Offset: 030h */ ++ volatile uint32_t gi2cctl; ++ /**PHY Vendor Control Register. Offset: 034h */ ++ volatile uint32_t gpvndctl; ++ /**General Purpose Input/Output Register. Offset: 038h */ ++ volatile uint32_t ggpio; ++ /**User ID Register. Offset: 03Ch */ ++ volatile uint32_t guid; ++ /**Synopsys ID Register (Read Only). Offset: 040h */ ++ volatile uint32_t gsnpsid; ++ /**User HW Config1 Register (Read Only). Offset: 044h */ ++ volatile uint32_t ghwcfg1; ++ /**User HW Config2 Register (Read Only). Offset: 048h */ ++ volatile uint32_t ghwcfg2; ++#define DWC_SLAVE_ONLY_ARCH 0 ++#define DWC_EXT_DMA_ARCH 1 ++#define DWC_INT_DMA_ARCH 2 ++ ++#define DWC_MODE_HNP_SRP_CAPABLE 0 ++#define DWC_MODE_SRP_ONLY_CAPABLE 1 ++#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 ++#define DWC_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ /**User HW Config3 Register (Read Only). Offset: 04Ch */ ++ volatile uint32_t ghwcfg3; ++ /**User HW Config4 Register (Read Only). Offset: 050h*/ ++ volatile uint32_t ghwcfg4; ++ /** Core LPM Configuration register */ ++ volatile uint32_t glpmcfg; ++ /** Reserved Offset: 058h-0FFh */ ++ volatile uint32_t reserved[42]; ++ /** Host Periodic Transmit FIFO Size Register. Offset: 100h */ ++ volatile uint32_t hptxfsiz; ++ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, ++ otherwise Device Transmit FIFO#n Register. ++ * Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15). */ ++ volatile uint32_t dptxfsiz_dieptxf[15]; ++} dwc_otg_core_global_regs_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Control ++ * and Status Register (GOTGCTL). Set the bits using the bit ++ * fields then write the d32 value to the register. ++ */ ++typedef union gotgctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned sesreqscs:1; ++ unsigned sesreq:1; ++ unsigned reserved2_7:6; ++ unsigned hstnegscs:1; ++ unsigned hnpreq:1; ++ unsigned hstsethnpen:1; ++ unsigned devhnpen:1; ++ unsigned reserved12_15:4; ++ unsigned conidsts:1; ++ unsigned reserved17:1; ++ unsigned asesvld:1; ++ unsigned bsesvld:1; ++ unsigned currmod:1; ++ unsigned reserved21_31:11; ++ } b; ++} gotgctl_data_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Interrupt Register ++ * (GOTGINT). Set/clear the bits using the bit fields then write the d32 ++ * value to the register. ++ */ ++typedef union gotgint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Current Mode */ ++ unsigned reserved0_1:2; ++ ++ /** Session End Detected */ ++ unsigned sesenddet:1; ++ ++ unsigned reserved3_7:5; ++ ++ /** Session Request Success Status Change */ ++ unsigned sesreqsucstschng:1; ++ /** Host Negotiation Success Status Change */ ++ unsigned hstnegsucstschng:1; ++ ++ unsigned reserver10_16:7; ++ ++ /** Host Negotiation Detected */ ++ unsigned hstnegdet:1; ++ /** A-Device Timeout Change */ ++ unsigned adevtoutchng:1; ++ /** Debounce Done */ ++ unsigned debdone:1; ++ ++ unsigned reserved31_20:12; ++ ++ } b; ++} gotgint_data_t; ++ ++/** ++ * This union represents the bit fields of the Core AHB Configuration ++ * Register (GAHBCFG). Set/clear the bits using the bit fields then ++ * write the d32 value to the register. ++ */ ++typedef union gahbcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned glblintrmsk:1; ++#define DWC_GAHBCFG_GLBINT_ENABLE 1 ++ ++ unsigned hburstlen:4; ++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 ++ ++ unsigned dmaenable:1; ++#define DWC_GAHBCFG_DMAENABLE 1 ++ unsigned reserved:1; ++ unsigned nptxfemplvl_txfemplvl:1; ++ unsigned ptxfemplvl:1; ++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 ++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 ++ unsigned reserved9_31:23; ++ } b; ++} gahbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core USB Configuration ++ * Register (GUSBCFG). Set the bits using the bit fields then write ++ * the d32 value to the register. ++ */ ++typedef union gusbcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned toutcal:3; ++ unsigned phyif:1; ++ unsigned ulpi_utmi_sel:1; ++ unsigned fsintf:1; ++ unsigned physel:1; ++ unsigned ddrsel:1; ++ unsigned srpcap:1; ++ unsigned hnpcap:1; ++ unsigned usbtrdtim:4; ++ unsigned nptxfrwnden:1; ++ unsigned phylpwrclksel:1; ++ unsigned otgutmifssel:1; ++ unsigned ulpi_fsls:1; ++ unsigned ulpi_auto_res:1; ++ unsigned ulpi_clk_sus_m:1; ++ unsigned ulpi_ext_vbus_drv:1; ++ unsigned ulpi_int_vbus_indicator:1; ++ unsigned term_sel_dl_pulse:1; ++ unsigned reserved23_25:3; ++ unsigned ic_usb_cap:1; ++ unsigned ic_traffic_pull_remove:1; ++ unsigned tx_end_delay:1; ++ unsigned reserved29_31:3; ++ } b; ++} gusbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core LPM Configuration ++ * Register (GLPMCFG). Set the bits using bit fields then write ++ * the d32 value to the register. ++ */ ++typedef union glpmctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** LPM-Capable (LPMCap) (Device and Host) ++ * The application uses this bit to control ++ * the DWC_otg core LPM capabilities. ++ */ ++ unsigned lpm_cap_en:1; ++ /** LPM response programmed by application (AppL1Res) (Device) ++ * Handshake response to LPM token pre-programmed ++ * by device application software. ++ */ ++ unsigned appl_resp:1; ++ /** Host Initiated Resume Duration (HIRD) (Device and Host) ++ * In Host mode this field indicates the value of HIRD ++ * to be sent in an LPM transaction. ++ * In Device mode this field is updated with the ++ * Received LPM Token HIRD bmAttribute ++ * when an ACK/NYET/STALL response is sent ++ * to an LPM transaction. ++ */ ++ unsigned hird:4; ++ /** RemoteWakeEnable (bRemoteWake) (Device and Host) ++ * In Host mode this bit indicates the value of remote ++ * wake up to be sent in wIndex field of LPM transaction. ++ * In Device mode this field is updated with the ++ * Received LPM Token bRemoteWake bmAttribute ++ * when an ACK/NYET/STALL response is sent ++ * to an LPM transaction. ++ */ ++ unsigned rem_wkup_en:1; ++ /** Enable utmi_sleep_n (EnblSlpM) (Device and Host) ++ * The application uses this bit to control ++ * the utmi_sleep_n assertion to the PHY when in L1 state. ++ */ ++ unsigned en_utmi_sleep:1; ++ /** HIRD Threshold (HIRD_Thres) (Device and Host) ++ */ ++ unsigned hird_thres:5; ++ /** LPM Response (CoreL1Res) (Device and Host) ++ * In Host mode this bit contains handsake response to ++ * LPM transaction. ++ * In Device mode the response of the core to ++ * LPM transaction received is reflected in these two bits. ++ - 0x0 : ERROR (No handshake response) ++ - 0x1 : STALL ++ - 0x2 : NYET ++ - 0x3 : ACK ++ */ ++ unsigned lpm_resp:2; ++ /** Port Sleep Status (SlpSts) (Device and Host) ++ * This bit is set as long as a Sleep condition ++ * is present on the USB bus. ++ */ ++ unsigned prt_sleep_sts:1; ++ /** Sleep State Resume OK (L1ResumeOK) (Device and Host) ++ * Indicates that the application or host ++ * can start resume from Sleep state. ++ */ ++ unsigned sleep_state_resumeok:1; ++ /** LPM channel Index (LPM_Chnl_Indx) (Host) ++ * The channel number on which the LPM transaction ++ * has to be applied while sending ++ * an LPM transaction to the local device. ++ */ ++ unsigned lpm_chan_index:4; ++ /** LPM Retry Count (LPM_Retry_Cnt) (Host) ++ * Number host retries that would be performed ++ * if the device response was not valid response. ++ */ ++ unsigned retry_count:3; ++ /** Send LPM Transaction (SndLPM) (Host) ++ * When set by application software, ++ * an LPM transaction containing two tokens ++ * is sent. ++ */ ++ unsigned send_lpm:1; ++ /** LPM Retry status (LPM_RetryCnt_Sts) (Host) ++ * Number of LPM Host Retries still remaining ++ * to be transmitted for the current LPM sequence ++ */ ++ unsigned retry_count_sts:3; ++ unsigned reserved28_29:2; ++ /** In host mode once this bit is set, the host ++ * configures to drive the HSIC Idle state on the bus. ++ * It then waits for the device to initiate the Connect sequence. ++ * In device mode once this bit is set, the device waits for ++ * the HSIC Idle line state on the bus. Upon receving the Idle ++ * line state, it initiates the HSIC Connect sequence. ++ */ ++ unsigned hsic_connect:1; ++ /** This bit overrides and functionally inverts ++ * the if_select_hsic input port signal. ++ */ ++ unsigned inv_sel_hsic:1; ++ } b; ++} glpmcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core Reset Register ++ * (GRSTCTL). Set/clear the bits using the bit fields then write the ++ * d32 value to the register. ++ */ ++typedef union grstctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Core Soft Reset (CSftRst) (Device and Host) ++ * ++ * The application can flush the control logic in the ++ * entire core using this bit. This bit resets the ++ * pipelines in the AHB Clock domain as well as the ++ * PHY Clock domain. ++ * ++ * The state machines are reset to an IDLE state, the ++ * control bits in the CSRs are cleared, all the ++ * transmit FIFOs and the receive FIFO are flushed. ++ * ++ * The status mask bits that control the generation of ++ * the interrupt, are cleared, to clear the ++ * interrupt. The interrupt status bits are not ++ * cleared, so the application can get the status of ++ * any events that occurred in the core after it has ++ * set this bit. ++ * ++ * Any transactions on the AHB are terminated as soon ++ * as possible following the protocol. Any ++ * transactions on the USB are terminated immediately. ++ * ++ * The configuration settings in the CSRs are ++ * unchanged, so the software doesn't have to ++ * reprogram these registers (Device ++ * Configuration/Host Configuration/Core System ++ * Configuration/Core PHY Configuration). ++ * ++ * The application can write to this bit, any time it ++ * wants to reset the core. This is a self clearing ++ * bit and the core clears this bit after all the ++ * necessary logic is reset in the core, which may ++ * take several clocks, depending on the current state ++ * of the core. ++ */ ++ unsigned csftrst:1; ++ /** Hclk Soft Reset ++ * ++ * The application uses this bit to reset the control logic in ++ * the AHB clock domain. Only AHB clock domain pipelines are ++ * reset. ++ */ ++ unsigned hsftrst:1; ++ /** Host Frame Counter Reset (Host Only)
++ * ++ * The application can reset the (micro)frame number ++ * counter inside the core, using this bit. When the ++ * (micro)frame counter is reset, the subsequent SOF ++ * sent out by the core, will have a (micro)frame ++ * number of 0. ++ */ ++ unsigned hstfrm:1; ++ /** In Token Sequence Learning Queue Flush ++ * (INTknQFlsh) (Device Only) ++ */ ++ unsigned intknqflsh:1; ++ /** RxFIFO Flush (RxFFlsh) (Device and Host) ++ * ++ * The application can flush the entire Receive FIFO ++ * using this bit.

The application must first ++ * ensure that the core is not in the middle of a ++ * transaction.

The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is reading from the RxFIFO nor the MAC ++ * is writing the data in to the FIFO.

The ++ * application should wait until the bit is cleared ++ * before performing any other operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned rxfflsh:1; ++ /** TxFIFO Flush (TxFFlsh) (Device and Host). ++ * ++ * This bit is used to selectively flush a single or ++ * all transmit FIFOs. The application must first ++ * ensure that the core is not in the middle of a ++ * transaction.

The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is writing into the TxFIFO nor the MAC ++ * is reading the data out of the FIFO.

The ++ * application should wait until the core clears this ++ * bit, before performing any operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned txfflsh:1; ++ ++ /** TxFIFO Number (TxFNum) (Device and Host). ++ * ++ * This is the FIFO number which needs to be flushed, ++ * using the TxFIFO Flush bit. This field should not ++ * be changed until the TxFIFO Flush bit is cleared by ++ * the core. ++ * - 0x0 : Non Periodic TxFIFO Flush ++ * - 0x1 : Periodic TxFIFO #1 Flush in device mode ++ * or Periodic TxFIFO in host mode ++ * - 0x2 : Periodic TxFIFO #2 Flush in device mode. ++ * - ... ++ * - 0xF : Periodic TxFIFO #15 Flush in device mode ++ * - 0x10: Flush all the Transmit NonPeriodic and ++ * Transmit Periodic FIFOs in the core ++ */ ++ unsigned txfnum:5; ++ /** Reserved */ ++ unsigned reserved11_29:19; ++ /** DMA Request Signal. Indicated DMA request is in ++ * probress. Used for debug purpose. */ ++ unsigned dmareq:1; ++ /** AHB Master Idle. Indicates the AHB Master State ++ * Machine is in IDLE condition. */ ++ unsigned ahbidle:1; ++ } b; ++} grstctl_t; ++ ++/** ++ * This union represents the bit fields of the Core Interrupt Mask ++ * Register (GINTMSK). Set/clear the bits using the bit fields then ++ * write the d32 value to the register. ++ */ ++typedef union gintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned reserved0:1; ++ unsigned modemismatch:1; ++ unsigned otgintr:1; ++ unsigned sofintr:1; ++ unsigned rxstsqlvl:1; ++ unsigned nptxfempty:1; ++ unsigned ginnakeff:1; ++ unsigned goutnakeff:1; ++ unsigned reserved8:1; ++ unsigned i2cintr:1; ++ unsigned erlysuspend:1; ++ unsigned usbsuspend:1; ++ unsigned usbreset:1; ++ unsigned enumdone:1; ++ unsigned isooutdrop:1; ++ unsigned eopframe:1; ++ unsigned reserved16:1; ++ unsigned epmismatch:1; ++ unsigned inepintr:1; ++ unsigned outepintr:1; ++ unsigned incomplisoin:1; ++ unsigned incomplisoout:1; ++ unsigned reserved22_23:2; ++ unsigned portintr:1; ++ unsigned hcintr:1; ++ unsigned ptxfempty:1; ++ unsigned lpmtranrcvd:1; ++ unsigned conidstschng:1; ++ unsigned disconnect:1; ++ unsigned sessreqintr:1; ++ unsigned wkupintr:1; ++ } b; ++} gintmsk_data_t; ++/** ++ * This union represents the bit fields of the Core Interrupt Register ++ * (GINTSTS). Set/clear the bits using the bit fields then write the ++ * d32 value to the register. ++ */ ++typedef union gintsts_data { ++ /** raw register data */ ++ uint32_t d32; ++#define DWC_SOF_INTR_MASK 0x0008 ++ /** register bits */ ++ struct { ++#define DWC_HOST_MODE 1 ++ unsigned curmode:1; ++ unsigned modemismatch:1; ++ unsigned otgintr:1; ++ unsigned sofintr:1; ++ unsigned rxstsqlvl:1; ++ unsigned nptxfempty:1; ++ unsigned ginnakeff:1; ++ unsigned goutnakeff:1; ++ unsigned reserved8:1; ++ unsigned i2cintr:1; ++ unsigned erlysuspend:1; ++ unsigned usbsuspend:1; ++ unsigned usbreset:1; ++ unsigned enumdone:1; ++ unsigned isooutdrop:1; ++ unsigned eopframe:1; ++ unsigned intokenrx:1; ++ unsigned epmismatch:1; ++ unsigned inepint:1; ++ unsigned outepintr:1; ++ unsigned incomplisoin:1; ++ unsigned incomplisoout:1; ++ unsigned reserved22_23:2; ++ unsigned portintr:1; ++ unsigned hcintr:1; ++ unsigned ptxfempty:1; ++ unsigned lpmtranrcvd:1; ++ unsigned conidstschng:1; ++ unsigned disconnect:1; ++ unsigned sessreqintr:1; ++ unsigned wkupintr:1; ++ } b; ++} gintsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 ++ * element then read out the bits using the bit elements. ++ */ ++typedef union device_grxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned epnum:4; ++ unsigned bcnt:11; ++ unsigned dpid:2; ++ ++#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet ++#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete ++ ++#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK ++#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete ++#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet ++ unsigned pktsts:4; ++ unsigned fn:4; ++ unsigned reserved:7; ++ } b; ++} device_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 ++ * element then read out the bits using the bit elements. ++ */ ++typedef union host_grxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned chnum:4; ++ unsigned bcnt:11; ++ unsigned dpid:2; ++ ++ unsigned pktsts:4; ++#define DWC_GRXSTS_PKTSTS_IN 0x2 ++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 ++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 ++#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 ++ ++ unsigned reserved:11; ++ } b; ++} host_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, ++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the d32 element then ++ * read out the bits using the bit elements. ++ */ ++typedef union fifosize_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned startaddr:16; ++ unsigned depth:16; ++ } b; ++} fifosize_data_t; ++ ++/** ++ * This union represents the bit fields in the Non-Periodic Transmit ++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the ++ * d32 element then read out the bits using the bit ++ * elements. ++ */ ++typedef union gnptxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned nptxfspcavail:16; ++ unsigned nptxqspcavail:8; ++ /** Top of the Non-Periodic Transmit Request Queue ++ * - bit 24 - Terminate (Last entry for the selected ++ * channel/EP) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - IN/OUT ++ * - 2'b01 - Zero Length OUT ++ * - 2'b10 - PING/Complete Split ++ * - 2'b11 - Channel Halt ++ * - bits 30:27 - Channel/EP Number ++ */ ++ unsigned nptxqtop_terminate:1; ++ unsigned nptxqtop_token:2; ++ unsigned nptxqtop_chnep:4; ++ unsigned reserved:1; ++ } b; ++} gnptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Transmit ++ * FIFO Status Register (DTXFSTS). Read the register into the ++ * d32 element then read out the bits using the bit ++ * elements. ++ */ ++typedef union dtxfsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned txfspcavail:16; ++ unsigned reserved:16; ++ } b; ++} dtxfsts_data_t; ++ ++/** ++ * This union represents the bit fields in the I2C Control Register ++ * (I2CCTL). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union gi2cctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:8; ++ unsigned regaddr:8; ++ unsigned addr:7; ++ unsigned i2cen:1; ++ unsigned ack:1; ++ unsigned i2csuspctl:1; ++ unsigned i2cdevaddr:2; ++ unsigned reserved:2; ++ unsigned rw:1; ++ unsigned bsydne:1; ++ } b; ++} gi2cctl_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config1 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg1_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ep_dir0:2; ++ unsigned ep_dir1:2; ++ unsigned ep_dir2:2; ++ unsigned ep_dir3:2; ++ unsigned ep_dir4:2; ++ unsigned ep_dir5:2; ++ unsigned ep_dir6:2; ++ unsigned ep_dir7:2; ++ unsigned ep_dir8:2; ++ unsigned ep_dir9:2; ++ unsigned ep_dir10:2; ++ unsigned ep_dir11:2; ++ unsigned ep_dir12:2; ++ unsigned ep_dir13:2; ++ unsigned ep_dir14:2; ++ unsigned ep_dir15:2; ++ } b; ++} hwcfg1_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config2 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg2_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /* GHWCFG2 */ ++ unsigned op_mode:3; ++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 ++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 ++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ unsigned architecture:2; ++ unsigned point2point:1; ++ unsigned hs_phy_type:2; ++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 ++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 ++ ++ unsigned fs_phy_type:2; ++ unsigned num_dev_ep:4; ++ unsigned num_host_chan:4; ++ unsigned perio_ep_supported:1; ++ unsigned dynamic_fifo:1; ++ unsigned multi_proc_int:1; ++ unsigned reserved21:1; ++ unsigned nonperio_tx_q_depth:2; ++ unsigned host_perio_tx_q_depth:2; ++ unsigned dev_token_q_depth:5; ++ unsigned reserved31:1; ++ } b; ++} hwcfg2_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config3 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg3_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /* GHWCFG3 */ ++ unsigned xfer_size_cntr_width:4; ++ unsigned packet_size_cntr_width:3; ++ unsigned otg_func:1; ++ unsigned i2c:1; ++ unsigned vendor_ctrl_if:1; ++ unsigned optional_features:1; ++ unsigned synch_reset_type:1; ++ unsigned otg_enable_ic_usb:1; ++ unsigned otg_enable_hsic:1; ++ unsigned reserved14:1; ++ unsigned otg_lpm_en:1; ++ unsigned dfifo_depth:16; ++ } b; ++} hwcfg3_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config4 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg4_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned num_dev_perio_in_ep:4; ++ unsigned power_optimiz:1; ++ unsigned min_ahb_freq:9; ++ unsigned utmi_phy_data_width:2; ++ unsigned num_dev_mode_ctrl_ep:4; ++ unsigned iddig_filt_en:1; ++ unsigned vbus_valid_filt_en:1; ++ unsigned a_valid_filt_en:1; ++ unsigned b_valid_filt_en:1; ++ unsigned session_end_filt_en:1; ++ unsigned ded_fifo_en:1; ++ unsigned num_in_eps:4; ++ unsigned desc_dma:1; ++ unsigned desc_dma_dyn:1; ++ } b; ++} hwcfg4_data_t; ++ ++//////////////////////////////////////////// ++// Device Registers ++/** ++ * Device Global Registers. Offsets 800h-BFFh ++ * ++ * The following structures define the size and relative field offsets ++ * for the Device Mode Registers. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_global_regs { ++ /** Device Configuration Register. Offset 800h */ ++ volatile uint32_t dcfg; ++ /** Device Control Register. Offset: 804h */ ++ volatile uint32_t dctl; ++ /** Device Status Register (Read Only). Offset: 808h */ ++ volatile uint32_t dsts; ++ /** Reserved. Offset: 80Ch */ ++ uint32_t unused; ++ /** Device IN Endpoint Common Interrupt Mask ++ * Register. Offset: 810h */ ++ volatile uint32_t diepmsk; ++ /** Device OUT Endpoint Common Interrupt Mask ++ * Register. Offset: 814h */ ++ volatile uint32_t doepmsk; ++ /** Device All Endpoints Interrupt Register. Offset: 818h */ ++ volatile uint32_t daint; ++ /** Device All Endpoints Interrupt Mask Register. Offset: ++ * 81Ch */ ++ volatile uint32_t daintmsk; ++ /** Device IN Token Queue Read Register-1 (Read Only). ++ * Offset: 820h */ ++ volatile uint32_t dtknqr1; ++ /** Device IN Token Queue Read Register-2 (Read Only). ++ * Offset: 824h */ ++ volatile uint32_t dtknqr2; ++ /** Device VBUS discharge Register. Offset: 828h */ ++ volatile uint32_t dvbusdis; ++ /** Device VBUS Pulse Register. Offset: 82Ch */ ++ volatile uint32_t dvbuspulse; ++ /** Device IN Token Queue Read Register-3 (Read Only). / ++ * Device Thresholding control register (Read/Write) ++ * Offset: 830h */ ++ volatile uint32_t dtknqr3_dthrctl; ++ /** Device IN Token Queue Read Register-4 (Read Only). / ++ * Device IN EPs empty Inr. Mask Register (Read/Write) ++ * Offset: 834h */ ++ volatile uint32_t dtknqr4_fifoemptymsk; ++ /** Device Each Endpoint Interrupt Register (Read Only). / ++ * Offset: 838h */ ++ volatile uint32_t deachint; ++ /** Device Each Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 83Ch */ ++ volatile uint32_t deachintmsk; ++ /** Device Each In Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 840h */ ++ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; ++ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 880h */ ++ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; ++} dwc_otg_device_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device Configuration ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. Write the ++ * d32 member to the dcfg register. ++ */ ++typedef union dcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Device Speed */ ++ unsigned devspd:2; ++ /** Non Zero Length Status OUT Handshake */ ++ unsigned nzstsouthshk:1; ++#define DWC_DCFG_SEND_STALL 1 ++ ++ unsigned reserved3:1; ++ /** Device Addresses */ ++ unsigned devaddr:7; ++ /** Periodic Frame Interval */ ++ unsigned perfrint:2; ++#define DWC_DCFG_FRAME_INTERVAL_80 0 ++#define DWC_DCFG_FRAME_INTERVAL_85 1 ++#define DWC_DCFG_FRAME_INTERVAL_90 2 ++#define DWC_DCFG_FRAME_INTERVAL_95 3 ++ ++ unsigned reserved13_17:5; ++ /** In Endpoint Mis-match count */ ++ unsigned epmscnt:5; ++ /** Enable Descriptor DMA in Device mode */ ++ unsigned descdma:1; ++ } b; ++} dcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Control ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union dctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Remote Wakeup */ ++ unsigned rmtwkupsig:1; ++ /** Soft Disconnect */ ++ unsigned sftdiscon:1; ++ /** Global Non-Periodic IN NAK Status */ ++ unsigned gnpinnaksts:1; ++ /** Global OUT NAK Status */ ++ unsigned goutnaksts:1; ++ /** Test Control */ ++ unsigned tstctl:3; ++ /** Set Global Non-Periodic IN NAK */ ++ unsigned sgnpinnak:1; ++ /** Clear Global Non-Periodic IN NAK */ ++ unsigned cgnpinnak:1; ++ /** Set Global OUT NAK */ ++ unsigned sgoutnak:1; ++ /** Clear Global OUT NAK */ ++ unsigned cgoutnak:1; ++ ++ /** Power-On Programming Done */ ++ unsigned pwronprgdone:1; ++ /** Global Continue on BNA */ ++ unsigned gcontbna:1; ++ /** Global Multi Count */ ++ unsigned gmc:2; ++ /** Ignore Frame Number for ISOC EPs */ ++ unsigned ifrmnum:1; ++ /** NAK on Babble */ ++ unsigned nakonbble:1; ++ ++ unsigned reserved17_31:15; ++ } b; ++} dctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Status ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union dsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Suspend Status */ ++ unsigned suspsts:1; ++ /** Enumerated Speed */ ++ unsigned enumspd:2; ++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 ++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 ++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 ++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 ++ /** Erratic Error */ ++ unsigned errticerr:1; ++ unsigned reserved4_7:4; ++ /** Frame or Microframe Number of the received SOF */ ++ unsigned soffn:14; ++ unsigned reserved22_31:10; ++ } b; ++} dsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP Interrupt ++ * Register and the Device IN EP Common Mask Register. ++ * ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union diepint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer complete mask */ ++ unsigned xfercompl:1; ++ /** Endpoint disable mask */ ++ unsigned epdisabled:1; ++ /** AHB Error mask */ ++ unsigned ahberr:1; ++ /** TimeOUT Handshake mask (non-ISOC EPs) */ ++ unsigned timeout:1; ++ /** IN Token received with TxF Empty mask */ ++ unsigned intktxfemp:1; ++ /** IN Token Received with EP mismatch mask */ ++ unsigned intknepmis:1; ++ /** IN Endpoint HAK Effective mask */ ++ unsigned inepnakeff:1; ++ /** IN Endpoint HAK Effective mask */ ++ unsigned emptyintr:1; ++ ++ unsigned txfifoundrn:1; ++ ++ /** BNA Interrupt mask */ ++ unsigned bna:1; ++ ++ unsigned reserved10_12:3; ++ /** BNA Interrupt mask */ ++ unsigned nak:1; ++ ++ unsigned reserved14_31:18; ++ } b; ++} diepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union diepint_data diepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP Interrupt ++ * Registerand Device OUT EP Common Interrupt Mask Register. ++ * ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union doepint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer complete */ ++ unsigned xfercompl:1; ++ /** Endpoint disable */ ++ unsigned epdisabled:1; ++ /** AHB Error */ ++ unsigned ahberr:1; ++ /** Setup Phase Done (contorl EPs) */ ++ unsigned setup:1; ++ /** OUT Token Received when Endpoint Disabled */ ++ unsigned outtknepdis:1; ++ ++ unsigned stsphsercvd:1; ++ /** Back-to-Back SETUP Packets Received */ ++ unsigned back2backsetup:1; ++ ++ unsigned reserved7:1; ++ /** OUT packet Error */ ++ unsigned outpkterr:1; ++ /** BNA Interrupt */ ++ unsigned bna:1; ++ ++ unsigned reserved10:1; ++ /** Packet Drop Status */ ++ unsigned pktdrpsts:1; ++ /** Babble Interrupt */ ++ unsigned babble:1; ++ /** NAK Interrupt */ ++ unsigned nak:1; ++ /** NYET Interrupt */ ++ unsigned nyet:1; ++ ++ unsigned reserved15_31:17; ++ } b; ++} doepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union doepint_data doepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device All EP Interrupt ++ * and Mask Registers. ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union daint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** IN Endpoint bits */ ++ unsigned in:16; ++ /** OUT Endpoint bits */ ++ unsigned out:16; ++ } ep; ++ struct { ++ /** IN Endpoint bits */ ++ unsigned inep0:1; ++ unsigned inep1:1; ++ unsigned inep2:1; ++ unsigned inep3:1; ++ unsigned inep4:1; ++ unsigned inep5:1; ++ unsigned inep6:1; ++ unsigned inep7:1; ++ unsigned inep8:1; ++ unsigned inep9:1; ++ unsigned inep10:1; ++ unsigned inep11:1; ++ unsigned inep12:1; ++ unsigned inep13:1; ++ unsigned inep14:1; ++ unsigned inep15:1; ++ /** OUT Endpoint bits */ ++ unsigned outep0:1; ++ unsigned outep1:1; ++ unsigned outep2:1; ++ unsigned outep3:1; ++ unsigned outep4:1; ++ unsigned outep5:1; ++ unsigned outep6:1; ++ unsigned outep7:1; ++ unsigned outep8:1; ++ unsigned outep9:1; ++ unsigned outep10:1; ++ unsigned outep11:1; ++ unsigned outep12:1; ++ unsigned outep13:1; ++ unsigned outep14:1; ++ unsigned outep15:1; ++ } b; ++} daint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN Token Queue ++ * Read Registers. ++ * - Read the register into the d32 member. ++ * - READ-ONLY Register ++ */ ++typedef union dtknq1_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** In Token Queue Write Pointer */ ++ unsigned intknwptr:5; ++ /** Reserved */ ++ unsigned reserved05_06:2; ++ /** write pointer has wrapped. */ ++ unsigned wrap_bit:1; ++ /** EP Numbers of IN Tokens 0 ... 4 */ ++ unsigned epnums0_5:24; ++ } b; ++} dtknq1_data_t; ++ ++/** ++ * This union represents Threshold control Register ++ * - Read and write the register into the d32 member. ++ * - READ-WRITABLE Register ++ */ ++typedef union dthrctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** non ISO Tx Thr. Enable */ ++ unsigned non_iso_thr_en:1; ++ /** ISO Tx Thr. Enable */ ++ unsigned iso_thr_en:1; ++ /** Tx Thr. Length */ ++ unsigned tx_thr_len:9; ++ /** AHB Threshold ratio */ ++ unsigned ahb_thr_ratio:2; ++ /** Reserved */ ++ unsigned reserved13_15:3; ++ /** Rx Thr. Enable */ ++ unsigned rx_thr_en:1; ++ /** Rx Thr. Length */ ++ unsigned rx_thr_len:9; ++ /** Reserved */ ++ unsigned reserved26_31:6; ++ } b; ++} dthrctl_data_t; ++ ++/** ++ * Device Logical IN Endpoint-Specific Registers. Offsets ++ * 900h-AFCh ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_in_ep_regs { ++ /** Device IN Endpoint Control Register. Offset:900h + ++ * (ep_num * 20h) + 00h */ ++ volatile uint32_t diepctl; ++ /** Reserved. Offset:900h + (ep_num * 20h) + 04h */ ++ uint32_t reserved04; ++ /** Device IN Endpoint Interrupt Register. Offset:900h + ++ * (ep_num * 20h) + 08h */ ++ volatile uint32_t diepint; ++ /** Reserved. Offset:900h + (ep_num * 20h) + 0Ch */ ++ uint32_t reserved0C; ++ /** Device IN Endpoint Transfer Size ++ * Register. Offset:900h + (ep_num * 20h) + 10h */ ++ volatile uint32_t dieptsiz; ++ /** Device IN Endpoint DMA Address Register. Offset:900h + ++ * (ep_num * 20h) + 14h */ ++ volatile uint32_t diepdma; ++ /** Device IN Endpoint Transmit FIFO Status Register. Offset:900h + ++ * (ep_num * 20h) + 18h */ ++ volatile uint32_t dtxfsts; ++ /** Device IN Endpoint DMA Buffer Register. Offset:900h + ++ * (ep_num * 20h) + 1Ch */ ++ volatile uint32_t diepdmab; ++} dwc_otg_dev_in_ep_regs_t; ++ ++/** ++ * Device Logical OUT Endpoint-Specific Registers. Offsets: ++ * B00h-CFCh ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_out_ep_regs { ++ /** Device OUT Endpoint Control Register. Offset:B00h + ++ * (ep_num * 20h) + 00h */ ++ volatile uint32_t doepctl; ++ /** Device OUT Endpoint Frame number Register. Offset: ++ * B00h + (ep_num * 20h) + 04h */ ++ volatile uint32_t doepfn; ++ /** Device OUT Endpoint Interrupt Register. Offset:B00h + ++ * (ep_num * 20h) + 08h */ ++ volatile uint32_t doepint; ++ /** Reserved. Offset:B00h + (ep_num * 20h) + 0Ch */ ++ uint32_t reserved0C; ++ /** Device OUT Endpoint Transfer Size Register. Offset: ++ * B00h + (ep_num * 20h) + 10h */ ++ volatile uint32_t doeptsiz; ++ /** Device OUT Endpoint DMA Address Register. Offset:B00h ++ * + (ep_num * 20h) + 14h */ ++ volatile uint32_t doepdma; ++ /** Reserved. Offset:B00h + * (ep_num * 20h) + 18h */ ++ uint32_t unused; ++ /** Device OUT Endpoint DMA Buffer Register. Offset:B00h ++ * + (ep_num * 20h) + 1Ch */ ++ uint32_t doepdmab; ++} dwc_otg_dev_out_ep_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Control ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union depctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Maximum Packet Size ++ * IN/OUT EPn ++ * IN/OUT EP0 - 2 bits ++ * 2'b00: 64 Bytes ++ * 2'b01: 32 ++ * 2'b10: 16 ++ * 2'b11: 8 */ ++ unsigned mps:11; ++#define DWC_DEP0CTL_MPS_64 0 ++#define DWC_DEP0CTL_MPS_32 1 ++#define DWC_DEP0CTL_MPS_16 2 ++#define DWC_DEP0CTL_MPS_8 3 ++ ++ /** Next Endpoint ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned nextep:4; ++ ++ /** USB Active Endpoint */ ++ unsigned usbactep:1; ++ ++ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) ++ * This field contains the PID of the packet going to ++ * be received or transmitted on this endpoint. The ++ * application should program the PID of the first ++ * packet going to be received or transmitted on this ++ * endpoint , after the endpoint is ++ * activated. Application use the SetD1PID and ++ * SetD0PID fields of this register to program either ++ * D0 or D1 PID. ++ * ++ * The encoding for this field is ++ * - 0: D0 ++ * - 1: D1 ++ */ ++ unsigned dpid:1; ++ ++ /** NAK Status */ ++ unsigned naksts:1; ++ ++ /** Endpoint Type ++ * 2'b00: Control ++ * 2'b01: Isochronous ++ * 2'b10: Bulk ++ * 2'b11: Interrupt */ ++ unsigned eptype:2; ++ ++ /** Snoop Mode ++ * OUT EPn/OUT EP0 ++ * IN EPn/IN EP0 - reserved */ ++ unsigned snp:1; ++ ++ /** Stall Handshake */ ++ unsigned stall:1; ++ ++ /** Tx Fifo Number ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned txfnum:4; ++ ++ /** Clear NAK */ ++ unsigned cnak:1; ++ /** Set NAK */ ++ unsigned snak:1; ++ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA0. Set Even ++ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to even (micro) ++ * frame. ++ */ ++ unsigned setd0pid:1; ++ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA1 Set Odd ++ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to odd (micro) frame. ++ */ ++ unsigned setd1pid:1; ++ ++ /** Endpoint Disable */ ++ unsigned epdis:1; ++ /** Endpoint Enable */ ++ unsigned epena:1; ++ } b; ++} depctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Transfer ++ * Size Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union deptsiz_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize:19; ++ /** Packet Count */ ++ unsigned pktcnt:10; ++ /** Multi Count - Periodic IN endpoints */ ++ unsigned mc:2; ++ unsigned reserved:1; ++ } b; ++} deptsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP 0 Transfer ++ * Size Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union deptsiz0_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize:7; ++ /** Reserved */ ++ unsigned reserved7_18:12; ++ /** Packet Count */ ++ unsigned pktcnt:1; ++ /** Reserved */ ++ unsigned reserved20_28:9; ++ /**Setup Packet Count (DOEPTSIZ0 Only) */ ++ unsigned supcnt:2; ++ unsigned reserved31; ++ } b; ++} deptsiz0_data_t; ++ ++///////////////////////////////////////////////// ++// DMA Descriptor Specific Structures ++// ++ ++/** Buffer status definitions */ ++ ++#define BS_HOST_READY 0x0 ++#define BS_DMA_BUSY 0x1 ++#define BS_DMA_DONE 0x2 ++#define BS_HOST_BUSY 0x3 ++ ++/** Receive/Transmit status definitions */ ++ ++#define RTS_SUCCESS 0x0 ++#define RTS_BUFFLUSH 0x1 ++#define RTS_RESERVED 0x2 ++#define RTS_BUFERR 0x3 ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet. Read the quadlet into the d32 member then ++ * set/clear the bits using the bit, b_iso_out and ++ * b_iso_in elements. ++ */ ++typedef union dev_dma_desc_sts { ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned bytes:16; ++ ++ unsigned reserved16_22:7; ++ /** Multiple Transfer - only for OUT EPs */ ++ unsigned mtrf:1; ++ /** Setup Packet received - only for OUT EPs */ ++ unsigned sr:1; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Receive Status */ ++ unsigned sts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b; ++ ++#ifdef DWC_EN_ISOC ++ /** iso out quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned rxbytes:11; ++ ++ unsigned reserved11:1; ++ /** Frame Number */ ++ unsigned framenum:11; ++ /** Received ISO Data PID */ ++ unsigned pid:2; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Receive Status */ ++ unsigned rxsts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b_iso_out; ++ ++ /** iso in quadlet bits */ ++ struct { ++ /** Transmited number of bytes */ ++ unsigned txbytes:12; ++ /** Frame Number */ ++ unsigned framenum:11; ++ /** Transmited ISO Data PID */ ++ unsigned pid:2; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Transmit Status */ ++ unsigned txsts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b_iso_in; ++#endif /* DWC_EN_ISOC */ ++} dev_dma_desc_sts_t; ++ ++/** ++ * DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_dev_dma_desc { ++ /** DMA Descriptor status quadlet */ ++ dev_dma_desc_sts_t status; ++ /** DMA Descriptor data buffer pointer */ ++ uint32_t buf; ++} dwc_otg_dev_dma_desc_t; ++ ++/** ++ * The dwc_otg_dev_if structure contains information needed to manage ++ * the DWC_otg controller acting in device mode. It represents the ++ * programming view of the device-specific aspects of the controller. ++ */ ++typedef struct dwc_otg_dev_if { ++ /** Pointer to device Global registers. ++ * Device Global Registers starting at offset 800h ++ */ ++ dwc_otg_device_global_regs_t *dev_global_regs; ++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 ++ ++ /** ++ * Device Logical IN Endpoint-Specific Registers 900h-AFCh ++ */ ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_IN_EP_REG_OFFSET 0x900 ++#define DWC_EP_REG_OFFSET 0x20 ++ ++ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 ++ ++ /* Device configuration information */ ++ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ ++ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ ++ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ ++ ++ /** Size of periodic FIFOs (Bytes) */ ++ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Size of Tx FIFOs (Bytes) */ ++ uint16_t tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flags and length varaiables **/ ++ uint16_t rx_thr_en; ++ uint16_t iso_tx_thr_en; ++ uint16_t non_iso_tx_thr_en; ++ ++ uint16_t rx_thr_length; ++ uint16_t tx_thr_length; ++ ++ /** ++ * Pointers to the DMA Descriptors for EP0 Control ++ * transfers (virtual and physical) ++ */ ++ ++ /** 2 descriptors for SETUP packets */ ++ dwc_dma_t dma_setup_desc_addr[2]; ++ dwc_otg_dev_dma_desc_t *setup_desc_addr[2]; ++ ++ /** Pointer to Descriptor with latest SETUP packet */ ++ dwc_otg_dev_dma_desc_t *psetup; ++ ++ /** Index of current SETUP handler descriptor */ ++ uint32_t setup_desc_index; ++ ++ /** Descriptor for Data In or Status In phases */ ++ dwc_dma_t dma_in_desc_addr; ++ dwc_otg_dev_dma_desc_t *in_desc_addr; ++ ++ /** Descriptor for Data Out or Status Out phases */ ++ dwc_dma_t dma_out_desc_addr; ++ dwc_otg_dev_dma_desc_t *out_desc_addr; ++ ++ /** Setup Packet Detected - if set clear NAK when queueing */ ++ uint32_t spd; ++ ++} dwc_otg_dev_if_t; ++ ++///////////////////////////////////////////////// ++// Host Mode Register Structures ++// ++/** ++ * The Host Global Registers structure defines the size and relative ++ * field offsets for the Host Mode Global Registers. Host Global ++ * Registers offsets 400h-7FFh. ++*/ ++typedef struct dwc_otg_host_global_regs { ++ /** Host Configuration Register. Offset: 400h */ ++ volatile uint32_t hcfg; ++ /** Host Frame Interval Register. Offset: 404h */ ++ volatile uint32_t hfir; ++ /** Host Frame Number / Frame Remaining Register. Offset: 408h */ ++ volatile uint32_t hfnum; ++ /** Reserved. Offset: 40Ch */ ++ uint32_t reserved40C; ++ /** Host Periodic Transmit FIFO/ Queue Status Register. Offset: 410h */ ++ volatile uint32_t hptxsts; ++ /** Host All Channels Interrupt Register. Offset: 414h */ ++ volatile uint32_t haint; ++ /** Host All Channels Interrupt Mask Register. Offset: 418h */ ++ volatile uint32_t haintmsk; ++ /** Host Frame List Base Address Register . Offset: 41Ch */ ++ volatile uint32_t hflbaddr; ++} dwc_otg_host_global_regs_t; ++ ++ ++/** ++ * This union represents the bit fields in the Host Configuration Register. ++ * Read the register into the d32 member then set/clear the bits using ++ * the bit elements. Write the d32 member to the hcfg register. ++ */ ++typedef union hcfg_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ /** FS/LS Phy Clock Select */ ++ unsigned fslspclksel:2; ++#define DWC_HCFG_30_60_MHZ 0 ++#define DWC_HCFG_48_MHZ 1 ++#define DWC_HCFG_6_MHZ 2 ++ ++ /** FS/LS Only Support */ ++ unsigned fslssupp:1; ++ unsigned reserved3_22 : 20; ++ /** Enable Scatter/gather DMA in Host mode */ ++ unsigned descdma : 1; ++ /** Frame List Entries */ ++ unsigned frlisten: 2; ++ /** Enable Periodic Scheduling */ ++ unsigned perschedena: 1; ++ /** Periodic Scheduling Enabled Status */ ++ unsigned perschedstat: 1; ++ } b; ++} hcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfir_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned frint:16; ++ unsigned reserved:16; ++ } b; ++} hfir_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfnum_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned frnum:16; ++#define DWC_HFNUM_MAX_FRNUM 0x3FFF ++ unsigned frrem:16; ++ } b; ++} hfnum_data_t; ++ ++typedef union hptxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned ptxfspcavail:16; ++ unsigned ptxqspcavail:8; ++ /** Top of the Periodic Transmit Request Queue ++ * - bit 24 - Terminate (last entry for the selected channel) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - Zero length ++ * - 2'b01 - Ping ++ * - 2'b10 - Disable ++ * - bits 30:27 - Channel Number ++ * - bit 31 - Odd/even microframe ++ */ ++ unsigned ptxqtop_terminate:1; ++ unsigned ptxqtop_token:2; ++ unsigned ptxqtop_chnum:4; ++ unsigned ptxqtop_odd:1; ++ } b; ++} hptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Port Control and Status ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hprt0 register. ++ */ ++typedef union hprt0_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned prtconnsts:1; ++ unsigned prtconndet:1; ++ unsigned prtena:1; ++ unsigned prtenchng:1; ++ unsigned prtovrcurract:1; ++ unsigned prtovrcurrchng:1; ++ unsigned prtres:1; ++ unsigned prtsusp:1; ++ unsigned prtrst:1; ++ unsigned reserved9:1; ++ unsigned prtlnsts:2; ++ unsigned prtpwr:1; ++ unsigned prttstctl:4; ++ unsigned prtspd:2; ++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 ++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 ++#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 ++ unsigned reserved19_31:13; ++ } b; ++} hprt0_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ch0:1; ++ unsigned ch1:1; ++ unsigned ch2:1; ++ unsigned ch3:1; ++ unsigned ch4:1; ++ unsigned ch5:1; ++ unsigned ch6:1; ++ unsigned ch7:1; ++ unsigned ch8:1; ++ unsigned ch9:1; ++ unsigned ch10:1; ++ unsigned ch11:1; ++ unsigned ch12:1; ++ unsigned ch13:1; ++ unsigned ch14:1; ++ unsigned ch15:1; ++ unsigned reserved:16; ++ } b; ++ ++ struct { ++ unsigned chint:16; ++ unsigned reserved:16; ++ } b2; ++} haint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ch0:1; ++ unsigned ch1:1; ++ unsigned ch2:1; ++ unsigned ch3:1; ++ unsigned ch4:1; ++ unsigned ch5:1; ++ unsigned ch6:1; ++ unsigned ch7:1; ++ unsigned ch8:1; ++ unsigned ch9:1; ++ unsigned ch10:1; ++ unsigned ch11:1; ++ unsigned ch12:1; ++ unsigned ch13:1; ++ unsigned ch14:1; ++ unsigned ch15:1; ++ unsigned reserved:16; ++ } b; ++ ++ struct { ++ unsigned chint:16; ++ unsigned reserved:16; ++ } b2; ++} haintmsk_data_t; ++ ++/** ++ * Host Channel Specific Registers. 500h-5FCh ++ */ ++typedef struct dwc_otg_hc_regs ++{ ++ /** Host Channel 0 Characteristic Register. Offset: 500h + (chan_num * 20h) + 00h */ ++ volatile uint32_t hcchar; ++ /** Host Channel 0 Split Control Register. Offset: 500h + (chan_num * 20h) + 04h */ ++ volatile uint32_t hcsplt; ++ /** Host Channel 0 Interrupt Register. Offset: 500h + (chan_num * 20h) + 08h */ ++ volatile uint32_t hcint; ++ /** Host Channel 0 Interrupt Mask Register. Offset: 500h + (chan_num * 20h) + 0Ch */ ++ volatile uint32_t hcintmsk; ++ /** Host Channel 0 Transfer Size Register. Offset: 500h + (chan_num * 20h) + 10h */ ++ volatile uint32_t hctsiz; ++ /** Host Channel 0 DMA Address Register. Offset: 500h + (chan_num * 20h) + 14h */ ++ volatile uint32_t hcdma; ++ volatile uint32_t reserved; ++ /** Host Channel 0 DMA Buffer Address Register. Offset: 500h + (chan_num * 20h) + 1Ch */ ++ volatile uint32_t hcdmab; ++} dwc_otg_hc_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Characteristics ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcchar register. ++ */ ++typedef union hcchar_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Maximum packet size in bytes */ ++ unsigned mps:11; ++ ++ /** Endpoint number */ ++ unsigned epnum:4; ++ ++ /** 0: OUT, 1: IN */ ++ unsigned epdir:1; ++ ++ unsigned reserved:1; ++ ++ /** 0: Full/high speed device, 1: Low speed device */ ++ unsigned lspddev:1; ++ ++ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ ++ unsigned eptype:2; ++ ++ /** Packets per frame for periodic transfers. 0 is reserved. */ ++ unsigned multicnt:2; ++ ++ /** Device address */ ++ unsigned devaddr:7; ++ ++ /** ++ * Frame to transmit periodic transaction. ++ * 0: even, 1: odd ++ */ ++ unsigned oddfrm:1; ++ ++ /** Channel disable */ ++ unsigned chdis:1; ++ ++ /** Channel enable */ ++ unsigned chen:1; ++ } b; ++} hcchar_data_t; ++ ++typedef union hcsplt_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Port Address */ ++ unsigned prtaddr:7; ++ ++ /** Hub Address */ ++ unsigned hubaddr:7; ++ ++ /** Transaction Position */ ++ unsigned xactpos:2; ++#define DWC_HCSPLIT_XACTPOS_MID 0 ++#define DWC_HCSPLIT_XACTPOS_END 1 ++#define DWC_HCSPLIT_XACTPOS_BEGIN 2 ++#define DWC_HCSPLIT_XACTPOS_ALL 3 ++ ++ /** Do Complete Split */ ++ unsigned compsplt:1; ++ ++ /** Reserved */ ++ unsigned reserved:14; ++ ++ /** Split Enble */ ++ unsigned spltena:1; ++ } b; ++} hcsplt_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union hcint_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Transfer Complete */ ++ unsigned xfercomp:1; ++ /** Channel Halted */ ++ unsigned chhltd:1; ++ /** AHB Error */ ++ unsigned ahberr:1; ++ /** STALL Response Received */ ++ unsigned stall:1; ++ /** NAK Response Received */ ++ unsigned nak:1; ++ /** ACK Response Received */ ++ unsigned ack:1; ++ /** NYET Response Received */ ++ unsigned nyet:1; ++ /** Transaction Err */ ++ unsigned xacterr:1; ++ /** Babble Error */ ++ unsigned bblerr:1; ++ /** Frame Overrun */ ++ unsigned frmovrun:1; ++ /** Data Toggle Error */ ++ unsigned datatglerr:1; ++ /** Buffer Not Available (only for DDMA mode) */ ++ unsigned bna : 1; ++ /** Exessive transaction error (only for DDMA mode) */ ++ unsigned xcs_xact : 1; ++ /** Frame List Rollover interrupt */ ++ unsigned frm_list_roll : 1; ++ /** Reserved */ ++ unsigned reserved14_31 : 18; ++ } b; ++} hcint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Interrupt Mask ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcintmsk register. ++ */ ++typedef union hcintmsk_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ unsigned xfercompl : 1; ++ unsigned chhltd : 1; ++ unsigned ahberr : 1; ++ unsigned stall : 1; ++ unsigned nak : 1; ++ unsigned ack : 1; ++ unsigned nyet : 1; ++ unsigned xacterr : 1; ++ unsigned bblerr : 1; ++ unsigned frmovrun : 1; ++ unsigned datatglerr : 1; ++ unsigned bna : 1; ++ unsigned xcs_xact : 1; ++ unsigned frm_list_roll : 1; ++ unsigned reserved14_31 : 18; ++ } b; ++} hcintmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Transfer Size ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcchar register. ++ */ ++ ++typedef union hctsiz_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ /** Total transfer size in bytes */ ++ unsigned xfersize:19; ++ ++ /** Data packets to transfer */ ++ unsigned pktcnt:10; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control), SETUP (Control) ++ */ ++ unsigned pid:2; ++#define DWC_HCTSIZ_DATA0 0 ++#define DWC_HCTSIZ_DATA1 2 ++#define DWC_HCTSIZ_DATA2 1 ++#define DWC_HCTSIZ_MDATA 3 ++#define DWC_HCTSIZ_SETUP 3 ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng:1; ++ } b; ++ ++ /** register bits */ ++ struct ++ { ++ /** Scheduling information */ ++ unsigned schinfo : 8; ++ ++ /** Number of transfer descriptors. ++ * Max value: ++ * 64 in general, ++ * 256 only for HS isochronous endpoint. ++ */ ++ unsigned ntd : 8; ++ ++ /** Data packets to transfer */ ++ unsigned reserved16_28 : 13; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control) ++ */ ++ unsigned pid : 2; ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng : 1; ++ } b_ddma; ++} hctsiz_data_t; ++ ++ ++/** ++ * This union represents the bit fields in the Host DMA Address ++ * Register used in Descriptor DMA mode. ++ */ ++typedef union hcdma_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned reserved0_2 : 3; ++ /** Current Transfer Descriptor. Not used for ISOC */ ++ unsigned ctd : 8; ++ /** Start Address of Descriptor List */ ++ unsigned dma_addr : 21; ++ } b; ++} hcdma_data_t; ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet for host mode. Read the quadlet into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union host_dma_desc_sts ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ ++ /* for non-isochronous */ ++ struct { ++ /** Number of bytes */ ++ unsigned n_bytes : 17; ++ /** QTD offset to jump when Short Packet received - only for IN EPs */ ++ unsigned qtd_offset : 6; ++ /** ++ * Set to request the core to jump to alternate QTD if ++ * Short Packet received - only for IN EPs ++ */ ++ unsigned a_qtd : 1; ++ /** ++ * Setup Packet bit. When set indicates that buffer contains ++ * setup packet. ++ */ ++ unsigned sup : 1; ++ /** Interrupt On Complete */ ++ unsigned ioc : 1; ++ /** End of List */ ++ unsigned eol : 1; ++ unsigned reserved27 : 1; ++ /** Rx/Tx Status */ ++ unsigned sts : 2; ++ #define DMA_DESC_STS_PKTERR 1 ++ unsigned reserved30 : 1; ++ /** Active Bit */ ++ unsigned a : 1; ++ } b; ++ /* for isochronous */ ++ struct { ++ /** Number of bytes */ ++ unsigned n_bytes : 12; ++ unsigned reserved12_24 : 13; ++ /** Interrupt On Complete */ ++ unsigned ioc : 1; ++ unsigned reserved26_27 : 2; ++ /** Rx/Tx Status */ ++ unsigned sts : 2; ++ unsigned reserved30 : 1; ++ /** Active Bit */ ++ unsigned a : 1; ++ } b_isoc; ++} host_dma_desc_sts_t; ++ ++#define MAX_DMA_DESC_SIZE 131071 ++#define MAX_DMA_DESC_NUM_GENERIC 64 ++#define MAX_DMA_DESC_NUM_HS_ISOC 256 ++#define MAX_FRLIST_EN_NUM 64 ++/** ++ * Host-mode DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_host_dma_desc ++{ ++ /** DMA Descriptor status quadlet */ ++ host_dma_desc_sts_t status; ++ /** DMA Descriptor data buffer pointer */ ++ uint32_t buf; ++} dwc_otg_host_dma_desc_t; ++ ++/** OTG Host Interface Structure. ++ * ++ * The OTG Host Interface Structure structure contains information ++ * needed to manage the DWC_otg controller acting in host mode. It ++ * represents the programming view of the host-specific aspects of the ++ * controller. ++ */ ++typedef struct dwc_otg_host_if { ++ /** Host Global Registers starting at offset 400h.*/ ++ dwc_otg_host_global_regs_t *host_global_regs; ++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 ++ ++ /** Host Port 0 Control and Status Register */ ++ volatile uint32_t *hprt0; ++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 ++ ++ /** Host Channel Specific Registers at offsets 500h-5FCh. */ ++ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; ++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 ++#define DWC_OTG_CHAN_REGS_OFFSET 0x20 ++ ++ /* Host configuration information */ ++ /** Number of Host Channels (range: 1-16) */ ++ uint8_t num_host_channels; ++ /** Periodic EPs supported (0: no, 1: yes) */ ++ uint8_t perio_eps_supported; ++ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ ++ uint16_t perio_tx_fifo_size; ++ ++} dwc_otg_host_if_t; ++ ++/** ++ * This union represents the bit fields in the Power and Clock Gating Control ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union pcgcctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Stop Pclk */ ++ unsigned stoppclk:1; ++ /** Gate Hclk */ ++ unsigned gatehclk:1; ++ /** Power Clamp */ ++ unsigned pwrclmp:1; ++ /** Reset Power Down Modules */ ++ unsigned rstpdwnmodule:1; ++ /** PHY Suspended */ ++ unsigned physuspended:1; ++ /** Enable Sleep Clock Gating (Enbl_L1Gating) */ ++ unsigned enbl_sleep_gating:1; ++ /** PHY In Sleep (PhySleep) */ ++ unsigned phy_in_sleep:1; ++ /** Deep Sleep*/ ++ unsigned deep_sleep:1; ++ ++ unsigned reserved31_8:24; ++ } b; ++} pcgcctl_data_t; ++ ++#endif +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/Makefile bootc-3.2.21/drivers/usb/host/dwc_otg/Makefile +--- upstream-3.2.21/drivers/usb/host/dwc_otg/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/Makefile 2012-06-23 23:52:30.000000000 +0000 +@@ -0,0 +1,80 @@ ++# ++# Makefile for DWC_otg Highspeed USB controller driver ++# ++ ++ifneq ($(KERNELRELEASE),) ++ ++ifeq ($(BUS_INTERFACE),) ++ # BUS_INTERFACE = -DLM_INTERFACE ++ BUS_INTERFACE = -DPLATFORM_INTERFACE=1 ++endif ++ ++ifeq ($(CONFIG_USB_DEBUG),y) ++CPPFLAGS += -DDEBUG ++endif ++ ++# Use one of the following flags to compile the software in host-only or ++# device-only mode. ++#CPPFLAGS += -DDWC_HOST_ONLY ++#CPPFLAGS += -DDWC_DEVICE_ONLY ++ ++CPPFLAGS += -Dlinux -DDWC_HS_ELECT_TST ++#CGG: CPPFLAGS += -DDWC_EN_ISOC ++CPPFLAGS += -I$(obj)/../dwc_common_port ++#CPPFLAGS += -I$(PORTLIB) ++CPPFLAGS += -DDWC_LINUX ++CPPFLAGS += $(CFI) ++CPPFLAGS += $(BUS_INTERFACE) ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o ++ ++dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o ++dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o ++dwc_otg-objs += dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o ++dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o ++ifneq ($(CFI),) ++dwc_otg-objs += dwc_otg_cfi.o ++endif ++ ++kernrelwd := $(subst ., ,$(KERNELRELEASE)) ++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) ++ ++ifneq ($(kernrel3),2.6.20) ++EXTRA_CFLAGS += $(CPPFLAGS) ++endif ++ ++else ++ ++PWD := $(shell pwd) ++PORTLIB := $(PWD)/../dwc_common_port ++ ++# Command paths ++CTAGS := $(CTAGS) ++DOXYGEN := $(DOXYGEN) ++ ++default: portlib ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++install: default ++ifneq ($(INSTALL_MOD_PATH),) ++ $(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install ++ $(MAKE) -C$(KDIR) M=$(PWD) modules_install ++else ++ @echo "No install path defined" ++endif ++ ++portlib: ++ $(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ cp $(PORTLIB)/Module.symvers $(PWD)/ ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++ ++clean: ++ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions ++ ++endif +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm bootc-3.2.21/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm +--- upstream-3.2.21/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,337 @@ ++package dwc_otg_test; ++ ++use strict; ++use Exporter (); ++ ++use vars qw(@ISA @EXPORT ++$sysfsdir $paramdir $errors $params ++); ++ ++@ISA = qw(Exporter); ++ ++# ++# Globals ++# ++$sysfsdir = "/sys/devices/lm0"; ++$paramdir = "/sys/module/dwc_otg"; ++$errors = 0; ++ ++$params = [ ++ { ++ NAME => "otg_cap", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 2 ++ }, ++ { ++ NAME => "dma_enable", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "dma_burst_size", ++ DEFAULT => 32, ++ ENUM => [1, 4, 8, 16, 32, 64, 128, 256], ++ LOW => 1, ++ HIGH => 256 ++ }, ++ { ++ NAME => "host_speed", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "host_support_fs_ls_low_power", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "host_ls_low_power_phy_clk", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "dev_speed", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "enable_dynamic_fifo", ++ DEFAULT => 1, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "data_fifo_size", ++ DEFAULT => 8192, ++ ENUM => [], ++ LOW => 32, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_rx_fifo_size", ++ DEFAULT => 1064, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_nperio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_1", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_2", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_3", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_4", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_5", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_6", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_7", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_8", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_9", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_10", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_11", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_12", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_13", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_14", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_15", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "host_rx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "host_nperio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "host_perio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "max_transfer_size", ++ DEFAULT => 65535, ++ ENUM => [], ++ LOW => 2047, ++ HIGH => 65535 ++ }, ++ { ++ NAME => "max_packet_count", ++ DEFAULT => 511, ++ ENUM => [], ++ LOW => 15, ++ HIGH => 511 ++ }, ++ { ++ NAME => "host_channels", ++ DEFAULT => 12, ++ ENUM => [], ++ LOW => 1, ++ HIGH => 16 ++ }, ++ { ++ NAME => "dev_endpoints", ++ DEFAULT => 6, ++ ENUM => [], ++ LOW => 1, ++ HIGH => 15 ++ }, ++ { ++ NAME => "phy_type", ++ DEFAULT => 1, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 2 ++ }, ++ { ++ NAME => "phy_utmi_width", ++ DEFAULT => 16, ++ ENUM => [8, 16], ++ LOW => 8, ++ HIGH => 16 ++ }, ++ { ++ NAME => "phy_ulpi_ddr", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ ]; ++ ++ ++# ++# ++sub check_arch { ++ $_ = `uname -m`; ++ chomp; ++ unless (m/armv4tl/) { ++ warn "# \n# Can't execute on $_. Run on integrator platform.\n# \n"; ++ return 0; ++ } ++ return 1; ++} ++ ++# ++# ++sub load_module { ++ my $params = shift; ++ print "\nRemoving Module\n"; ++ system "rmmod dwc_otg"; ++ print "Loading Module\n"; ++ if ($params ne "") { ++ print "Module Parameters: $params\n"; ++ } ++ if (system("modprobe dwc_otg $params")) { ++ warn "Unable to load module\n"; ++ return 0; ++ } ++ return 1; ++} ++ ++# ++# ++sub test_status { ++ my $arg = shift; ++ ++ print "\n"; ++ ++ if (defined $arg) { ++ warn "WARNING: $arg\n"; ++ } ++ ++ if ($errors > 0) { ++ warn "TEST FAILED with $errors errors\n"; ++ return 0; ++ } else { ++ print "TEST PASSED\n"; ++ return 0 if (defined $arg); ++ } ++ return 1; ++} ++ ++# ++# ++@EXPORT = qw( ++$sysfsdir ++$paramdir ++$params ++$errors ++check_arch ++load_module ++test_status ++); ++ ++1; +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/test/Makefile bootc-3.2.21/drivers/usb/host/dwc_otg/test/Makefile +--- upstream-3.2.21/drivers/usb/host/dwc_otg/test/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/test/Makefile 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,16 @@ ++ ++PERL=/usr/bin/perl ++PL_TESTS=test_sysfs.pl test_mod_param.pl ++ ++.PHONY : test ++test : perl_tests ++ ++perl_tests : ++ @echo ++ @echo Running perl tests ++ @for test in $(PL_TESTS); do \ ++ if $(PERL) ./$$test ; then \ ++ echo "=======> $$test, PASSED" ; \ ++ else echo "=======> $$test, FAILED" ; \ ++ fi \ ++ done +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/test/test_mod_param.pl bootc-3.2.21/drivers/usb/host/dwc_otg/test/test_mod_param.pl +--- upstream-3.2.21/drivers/usb/host/dwc_otg/test/test_mod_param.pl 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/test/test_mod_param.pl 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,133 @@ ++#!/usr/bin/perl -w ++# ++# Run this program on the integrator. ++# ++# - Tests module parameter default values. ++# - Tests setting of valid module parameter values via modprobe. ++# - Tests invalid module parameter values. ++# ----------------------------------------------------------------------------- ++use strict; ++use dwc_otg_test; ++ ++check_arch() or die; ++ ++# ++# ++sub test { ++ my ($param,$expected) = @_; ++ my $value = get($param); ++ ++ if ($value == $expected) { ++ print "$param = $value, okay\n"; ++ } ++ ++ else { ++ warn "ERROR: value of $param != $expected, $value\n"; ++ $errors ++; ++ } ++} ++ ++# ++# ++sub get { ++ my $param = shift; ++ my $tmp = `cat $paramdir/$param`; ++ chomp $tmp; ++ return $tmp; ++} ++ ++# ++# ++sub test_main { ++ ++ print "\nTesting Module Parameters\n"; ++ ++ load_module("") or die; ++ ++ # Test initial values ++ print "\nTesting Default Values\n"; ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ # Test low value ++ print "\nTesting Low Value\n"; ++ my $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} "; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{LOW}); ++ } ++ ++ # Test high value ++ print "\nTesting High Value\n"; ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} "; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{HIGH}); ++ } ++ ++ # Test Enum ++ print "\nTesting Enumerated\n"; ++ foreach (@{$params}) { ++ if (defined $_->{ENUM}) { ++ my $value; ++ foreach $value (@{$_->{ENUM}}) { ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $value); ++ } ++ } ++ } ++ ++ # Test Invalid Values ++ print "\nTesting Invalid Values\n"; ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ print "\nTesting Enumerated\n"; ++ foreach (@{$params}) { ++ if (defined $_->{ENUM}) { ++ my $value; ++ foreach $value (@{$_->{ENUM}}) { ++ $value = $value + 1; ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $_->{DEFAULT}); ++ $value = $value - 2; ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ } ++ } ++ ++ test_status() or die; ++} ++ ++test_main(); ++0; +diff -urN upstream-3.2.21/drivers/usb/host/dwc_otg/test/test_sysfs.pl bootc-3.2.21/drivers/usb/host/dwc_otg/test/test_sysfs.pl +--- upstream-3.2.21/drivers/usb/host/dwc_otg/test/test_sysfs.pl 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/dwc_otg/test/test_sysfs.pl 2012-06-23 23:52:31.000000000 +0000 +@@ -0,0 +1,193 @@ ++#!/usr/bin/perl -w ++# ++# Run this program on the integrator ++# - Tests select sysfs attributes. ++# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc. ++# ----------------------------------------------------------------------------- ++use strict; ++use dwc_otg_test; ++ ++check_arch() or die; ++ ++# ++# ++sub test { ++ my ($attr,$expected) = @_; ++ my $string = get($attr); ++ ++ if ($string eq $expected) { ++ printf("$attr = $string, okay\n"); ++ } ++ else { ++ warn "ERROR: value of $attr != $expected, $string\n"; ++ $errors ++; ++ } ++} ++ ++# ++# ++sub set { ++ my ($reg, $value) = @_; ++ system "echo $value > $sysfsdir/$reg"; ++} ++ ++# ++# ++sub get { ++ my $attr = shift; ++ my $string = `cat $sysfsdir/$attr`; ++ chomp $string; ++ if ($string =~ m/\s\=\s/) { ++ my $tmp; ++ ($tmp, $string) = split /\s=\s/, $string; ++ } ++ return $string; ++} ++ ++# ++# ++sub test_main { ++ print("\nTesting Sysfs Attributes\n"); ++ ++ load_module("") or die; ++ ++ # Test initial values of regoffset/regvalue/guid/gsnpsid ++ print("\nTesting Default Values\n"); ++ ++ test("regoffset", "0xffffffff"); ++ test("regvalue", "invalid offset"); ++ test("guid", "0x12345678"); # this will fail if it has been changed ++ test("gsnpsid", "0x4f54200a"); ++ ++ # Test operation of regoffset/regvalue ++ print("\nTesting regoffset\n"); ++ set('regoffset', '5a5a5a5a'); ++ test("regoffset", "0xffffffff"); ++ ++ set('regoffset', '0'); ++ test("regoffset", "0x00000000"); ++ ++ set('regoffset', '40000'); ++ test("regoffset", "0x00000000"); ++ ++ set('regoffset', '3ffff'); ++ test("regoffset", "0x0003ffff"); ++ ++ set('regoffset', '1'); ++ test("regoffset", "0x00000001"); ++ ++ print("\nTesting regvalue\n"); ++ set('regoffset', '3c'); ++ test("regvalue", "0x12345678"); ++ set('regvalue', '5a5a5a5a'); ++ test("regvalue", "0x5a5a5a5a"); ++ set('regvalue','a5a5a5a5'); ++ test("regvalue", "0xa5a5a5a5"); ++ set('guid','12345678'); ++ ++ # Test HNP Capable ++ print("\nTesting HNP Capable bit\n"); ++ set('hnpcapable', '1'); ++ test("hnpcapable", "0x1"); ++ set('hnpcapable','0'); ++ test("hnpcapable", "0x0"); ++ ++ set('regoffset','0c'); ++ ++ my $old = get('gusbcfg'); ++ print("setting hnpcapable\n"); ++ set('hnpcapable', '1'); ++ test("hnpcapable", "0x1"); ++ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9))); ++ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9))); ++ ++ $old = get('gusbcfg'); ++ print("clearing hnpcapable\n"); ++ set('hnpcapable', '0'); ++ test("hnpcapable", "0x0"); ++ test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9))); ++ test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9))); ++ ++ # Test SRP Capable ++ print("\nTesting SRP Capable bit\n"); ++ set('srpcapable', '1'); ++ test("srpcapable", "0x1"); ++ set('srpcapable','0'); ++ test("srpcapable", "0x0"); ++ ++ set('regoffset','0c'); ++ ++ $old = get('gusbcfg'); ++ print("setting srpcapable\n"); ++ set('srpcapable', '1'); ++ test("srpcapable", "0x1"); ++ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8))); ++ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8))); ++ ++ $old = get('gusbcfg'); ++ print("clearing srpcapable\n"); ++ set('srpcapable', '0'); ++ test("srpcapable", "0x0"); ++ test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8))); ++ test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8))); ++ ++ # Test GGPIO ++ print("\nTesting GGPIO\n"); ++ set('ggpio','5a5a5a5a'); ++ test('ggpio','0x5a5a0000'); ++ set('ggpio','a5a5a5a5'); ++ test('ggpio','0xa5a50000'); ++ set('ggpio','11110000'); ++ test('ggpio','0x11110000'); ++ set('ggpio','00001111'); ++ test('ggpio','0x00000000'); ++ ++ # Test DEVSPEED ++ print("\nTesting DEVSPEED\n"); ++ set('regoffset','800'); ++ $old = get('regvalue'); ++ set('devspeed','0'); ++ test('devspeed','0x0'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); ++ set('devspeed','1'); ++ test('devspeed','0x1'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); ++ set('devspeed','2'); ++ test('devspeed','0x2'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2)); ++ set('devspeed','3'); ++ test('devspeed','0x3'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3)); ++ set('devspeed','4'); ++ test('devspeed','0x0'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); ++ set('devspeed','5'); ++ test('devspeed','0x1'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); ++ ++ ++ # mode Returns the current mode:0 for device mode1 for host mode Read ++ # hnp Initiate the Host Negotiation Protocol. Read returns the status. Read/Write ++ # srp Initiate the Session Request Protocol. Read returns the status. Read/Write ++ # buspower Get or Set the Power State of the bus (0 - Off or 1 - On) Read/Write ++ # bussuspend Suspend the USB bus. Read/Write ++ # busconnected Get the connection status of the bus Read ++ ++ # gotgctl Get or set the Core Control Status Register. Read/Write ++ ## gusbcfg Get or set the Core USB Configuration Register Read/Write ++ # grxfsiz Get or set the Receive FIFO Size Register Read/Write ++ # gnptxfsiz Get or set the non-periodic Transmit Size Register Read/Write ++ # gpvndctl Get or set the PHY Vendor Control Register Read/Write ++ ## ggpio Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits. Read/Write ++ ## guid Get or set the value of the User ID Register Read/Write ++ ## gsnpsid Get the value of the Synopsys ID Regester Read ++ ## devspeed Get or set the device speed setting in the DCFG register Read/Write ++ # enumspeed Gets the device enumeration Speed. Read ++ # hptxfsiz Get the value of the Host Periodic Transmit FIFO Read ++ # hprt0 Get or Set the value in the Host Port Control and Status Register Read/Write ++ ++ test_status("TEST NYI") or die; ++} ++ ++test_main(); ++0; +diff -urN upstream-3.2.21/drivers/usb/host/Kconfig bootc-3.2.21/drivers/usb/host/Kconfig +--- upstream-3.2.21/drivers/usb/host/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/Kconfig 2012-06-23 23:52:30.000000000 +0000 +@@ -556,6 +556,19 @@ + To compile this driver a module, choose M here: the module + will be called "hwa-hc". + ++config USB_DWCOTG ++ tristate "Synopsis DWC host support" ++ depends on USB ++ help ++ The Synopsis DWC controller is a dual-role ++ host/peripheral/OTG ("On The Go") USB controllers. ++ ++ Enable this option to support this IP in host controller mode. ++ If unsure, say N. ++ ++ To compile this driver as a module, choose M here: the ++ modules built will be called dwc_otg and dwc_common_port. ++ + config USB_IMX21_HCD + tristate "i.MX21 HCD support" + depends on USB && ARM && ARCH_MXC +diff -urN upstream-3.2.21/drivers/usb/host/Makefile bootc-3.2.21/drivers/usb/host/Makefile +--- upstream-3.2.21/drivers/usb/host/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/host/Makefile 2012-06-23 23:52:30.000000000 +0000 +@@ -33,6 +33,8 @@ + obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o + obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o + obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_otg/ dwc_common_port/ + obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o + obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o + obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o +diff -urN upstream-3.2.21/drivers/usb/Makefile bootc-3.2.21/drivers/usb/Makefile +--- upstream-3.2.21/drivers/usb/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/usb/Makefile 2012-06-23 23:52:29.000000000 +0000 +@@ -23,6 +23,7 @@ + obj-$(CONFIG_USB_R8A66597_HCD) += host/ + obj-$(CONFIG_USB_HWA_HCD) += host/ + obj-$(CONFIG_USB_ISP1760_HCD) += host/ ++obj-$(CONFIG_USB_DWCOTG) += host/ + obj-$(CONFIG_USB_IMX21_HCD) += host/ + obj-$(CONFIG_USB_FSL_MPH_DR_OF) += host/ + +diff -urN upstream-3.2.21/drivers/video/bcm2708_fb.c bootc-3.2.21/drivers/video/bcm2708_fb.c +--- upstream-3.2.21/drivers/video/bcm2708_fb.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/video/bcm2708_fb.c 2012-06-23 23:52:35.000000000 +0000 +@@ -0,0 +1,473 @@ ++/* ++ * linux/drivers/video/bcm2708_fb.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Broadcom simple framebuffer driver ++ * ++ * This file is derived from cirrusfb.c ++ * Copyright 1999-2001 Jeff Garzik ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++ ++/* This is limited to 16 characters when displayed by X startup */ ++static const char *bcm2708_name = "BCM2708 FB"; ++ ++#define DRIVER_NAME "bcm2708_fb" ++ ++/* this data structure describes each frame buffer device we find */ ++ ++struct fbinfo_s { ++ u32 xres, yres, xres_virtual, yres_virtual; ++ u32 pitch, bpp; ++ u32 xoffset, yoffset; ++ u32 base; ++ u32 screen_size; ++}; ++ ++struct bcm2708_fb { ++ struct fb_info fb; ++ struct platform_device *dev; ++ struct fbinfo_s *info; ++ dma_addr_t dma; ++ u32 cmap[16]; ++}; ++ ++#define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) ++ ++static int bcm2708_fb_set_bitfields(struct fb_var_screeninfo *var) ++{ ++ int ret = 0; ++ ++ memset(&var->transp, 0, sizeof(var->transp)); ++ ++ var->red.msb_right = 0; ++ var->green.msb_right = 0; ++ var->blue.msb_right = 0; ++ ++ switch (var->bits_per_pixel) { ++ case 1: ++ case 2: ++ case 4: ++ case 8: ++ var->red.length = var->bits_per_pixel; ++ var->red.offset = 0; ++ var->green.length = var->bits_per_pixel; ++ var->green.offset = 0; ++ var->blue.length = var->bits_per_pixel; ++ var->blue.offset = 0; ++ break; ++ case 16: ++ var->red.length = 5; ++ var->blue.length = 5; ++ /* ++ * Green length can be 5 or 6 depending whether ++ * we're operating in RGB555 or RGB565 mode. ++ */ ++ if (var->green.length != 5 && var->green.length != 6) ++ var->green.length = 6; ++ break; ++ case 24: ++ var->red.length = 8; ++ var->blue.length = 8; ++ var->green.length = 8; ++ break; ++ case 32: ++ var->red.length = 8; ++ var->green.length = 8; ++ var->blue.length = 8; ++ var->transp.length = 8; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ /* ++ * >= 16bpp displays have separate colour component bitfields ++ * encoded in the pixel data. Calculate their position from ++ * the bitfield length defined above. ++ */ ++ if (ret == 0 && var->bits_per_pixel >= 24) { ++ var->red.offset = 0; ++ var->green.offset = var->red.offset + var->red.length; ++ var->blue.offset = var->green.offset + var->green.length; ++ var->transp.offset = var->blue.offset + var->blue.length; ++ } else if (ret == 0 && var->bits_per_pixel >= 16) { ++ var->blue.offset = 0; ++ var->green.offset = var->blue.offset + var->blue.length; ++ var->red.offset = var->green.offset + var->green.length; ++ var->transp.offset = var->red.offset + var->red.length; ++ } ++ ++ return ret; ++} ++ ++static int bcm2708_fb_check_var(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ /* info input, var output */ ++ int yres; ++ /* memory size in pixels */ ++ unsigned pixels = info->screen_size * 8 / var->bits_per_pixel; ++ ++ /* info input, var output */ ++ pr_info("bcm2708_fb_check_var info(%p) %dx%d (%dx%d), %d, %d\n", info, ++ info->var.xres, info->var.yres, info->var.xres_virtual, ++ info->var.yres_virtual, (int)info->screen_size, ++ info->var.bits_per_pixel); ++ pr_info("bcm2708_fb_check_var var(%p) %dx%d (%dx%d), %d, %d\n", var, ++ var->xres, var->yres, var->xres_virtual, var->yres_virtual, ++ var->bits_per_pixel, pixels); ++ ++ if (!var->bits_per_pixel) ++ var->bits_per_pixel = 16; ++ ++ if (bcm2708_fb_set_bitfields(var) != 0) { ++ pr_err("bcm2708_fb_check_var: invalid bits_per_pixel %d\n", ++ var->bits_per_pixel); ++ return -EINVAL; ++ } ++ ++ ++ if (var->xres_virtual < var->xres) ++ var->xres_virtual = var->xres; ++ /* use highest possible virtual resolution */ ++ if (var->yres_virtual == -1) { ++ var->yres_virtual = 480; ++ ++ pr_err ++ ("bcm2708_fb_check_var: virtual resolution set to maximum of %dx%d\n", ++ var->xres_virtual, var->yres_virtual); ++ } ++ if (var->yres_virtual < var->yres) ++ var->yres_virtual = var->yres; ++ ++ if (var->xoffset < 0) ++ var->xoffset = 0; ++ if (var->yoffset < 0) ++ var->yoffset = 0; ++ ++ /* truncate xoffset and yoffset to maximum if too high */ ++ if (var->xoffset > var->xres_virtual - var->xres) ++ var->xoffset = var->xres_virtual - var->xres - 1; ++ if (var->yoffset > var->yres_virtual - var->yres) ++ var->yoffset = var->yres_virtual - var->yres - 1; ++ ++ yres = var->yres; ++ if (var->vmode & FB_VMODE_DOUBLE) ++ yres *= 2; ++ else if (var->vmode & FB_VMODE_INTERLACED) ++ yres = (yres + 1) / 2; ++ ++ if (yres > 1200) { ++ pr_err("bcm2708_fb_check_var: ERROR: VerticalTotal >= 1200; " ++ "special treatment required! (TODO)\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int bcm2708_fb_set_par(struct fb_info *info) ++{ ++ uint32_t val = 0; ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ volatile struct fbinfo_s *fbinfo = fb->info; ++ fbinfo->xres = info->var.xres; ++ fbinfo->yres = info->var.yres; ++ fbinfo->xres_virtual = info->var.xres_virtual; ++ fbinfo->yres_virtual = info->var.yres_virtual; ++ fbinfo->bpp = info->var.bits_per_pixel; ++ fbinfo->xoffset = info->var.xoffset; ++ fbinfo->yoffset = info->var.yoffset; ++ fbinfo->base = 0; /* filled in by VC */ ++ fbinfo->pitch = 0; /* filled in by VC */ ++ ++ pr_info("bcm2708_fb_set_par info(%p) %dx%d (%dx%d), %d, %d\n", info, ++ info->var.xres, info->var.yres, info->var.xres_virtual, ++ info->var.yres_virtual, (int)info->screen_size, ++ info->var.bits_per_pixel); ++ ++ /* ensure last write to fbinfo is visible to GPU */ ++ wmb(); ++ ++ /* inform vc about new framebuffer */ ++ bcm_mailbox_write(MBOX_CHAN_FB, fb->dma); ++ ++ /* TODO: replace fb driver with vchiq version */ ++ /* wait for response */ ++ bcm_mailbox_read(MBOX_CHAN_FB, &val); ++ ++ /* ensure GPU writes are visible to us */ ++ rmb(); ++ ++ if (val == 0) { ++ fb->fb.fix.line_length = fbinfo->pitch; ++ ++ if (info->var.bits_per_pixel <= 8) ++ fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; ++ else ++ fb->fb.fix.visual = FB_VISUAL_TRUECOLOR; ++ ++ fb->fb.fix.smem_start = fbinfo->base; ++ fb->fb.fix.smem_len = fbinfo->pitch * fbinfo->yres_virtual; ++ fb->fb.screen_size = fbinfo->screen_size; ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ fb->fb.screen_base = ++ (void *)ioremap_wc(fb->fb.fix.smem_start, fb->fb.screen_size); ++ if (!fb->fb.screen_base) { ++ /* the console may currently be locked */ ++ console_trylock(); ++ console_unlock(); ++ ++ BUG(); /* what can we do here */ ++ } ++ } ++ pr_info ++ ("BCM2708FB: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d success=%d\n", ++ (void *)fb->fb.screen_base, (void *)fb->fb.fix.smem_start, ++ fbinfo->xres, fbinfo->yres, fbinfo->bpp, ++ fbinfo->pitch, (int)fb->fb.screen_size, val); ++ ++ return val; ++} ++ ++static inline u32 convert_bitfield(int val, struct fb_bitfield *bf) ++{ ++ unsigned int mask = (1 << bf->length) - 1; ++ ++ return (val >> (16 - bf->length) & mask) << bf->offset; ++} ++ ++static int bcm2708_fb_setcolreg(unsigned int regno, unsigned int red, ++ unsigned int green, unsigned int blue, ++ unsigned int transp, struct fb_info *info) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ ++ if (regno < 16) ++ fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) | ++ convert_bitfield(blue, &fb->fb.var.blue) | ++ convert_bitfield(green, &fb->fb.var.green) | ++ convert_bitfield(red, &fb->fb.var.red); ++ ++ return regno > 255; ++} ++ ++static int bcm2708_fb_blank(int blank_mode, struct fb_info *info) ++{ ++ /*pr_info("bcm2708_fb_blank\n"); */ ++ return -1; ++} ++ ++static void bcm2708_fb_fillrect(struct fb_info *info, ++ const struct fb_fillrect *rect) ++{ ++ /* (is called) pr_info("bcm2708_fb_fillrect\n"); */ ++ cfb_fillrect(info, rect); ++} ++ ++static void bcm2708_fb_copyarea(struct fb_info *info, ++ const struct fb_copyarea *region) ++{ ++ /*pr_info("bcm2708_fb_copyarea\n"); */ ++ cfb_copyarea(info, region); ++} ++ ++static void bcm2708_fb_imageblit(struct fb_info *info, ++ const struct fb_image *image) ++{ ++ /* (is called) pr_info("bcm2708_fb_imageblit\n"); */ ++ cfb_imageblit(info, image); ++} ++ ++static struct fb_ops bcm2708_fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = bcm2708_fb_check_var, ++ .fb_set_par = bcm2708_fb_set_par, ++ .fb_setcolreg = bcm2708_fb_setcolreg, ++ .fb_blank = bcm2708_fb_blank, ++ .fb_fillrect = bcm2708_fb_fillrect, ++ .fb_copyarea = bcm2708_fb_copyarea, ++ .fb_imageblit = bcm2708_fb_imageblit, ++}; ++ ++static int fbwidth = 800; /* module parameter */ ++static int fbheight = 480; /* module parameter */ ++static int fbdepth = 16; /* module parameter */ ++ ++static int bcm2708_fb_register(struct bcm2708_fb *fb) ++{ ++ int ret; ++ dma_addr_t dma; ++ void *mem; ++ ++ mem = ++ dma_alloc_coherent(NULL, PAGE_ALIGN(sizeof(*fb->info)), &dma, ++ GFP_KERNEL); ++ ++ if (NULL == mem) { ++ pr_err(": unable to allocate fbinfo buffer\n"); ++ ret = -ENOMEM; ++ } else { ++ fb->info = (struct fbinfo_s *)mem; ++ fb->dma = dma; ++ } ++ fb->fb.fbops = &bcm2708_fb_ops; ++ fb->fb.flags = FBINFO_FLAG_DEFAULT; ++ fb->fb.pseudo_palette = fb->cmap; ++ ++ strncpy(fb->fb.fix.id, bcm2708_name, sizeof(fb->fb.fix.id)); ++ fb->fb.fix.type = FB_TYPE_PACKED_PIXELS; ++ fb->fb.fix.type_aux = 0; ++ fb->fb.fix.xpanstep = 0; ++ fb->fb.fix.ypanstep = 0; ++ fb->fb.fix.ywrapstep = 0; ++ fb->fb.fix.accel = FB_ACCEL_NONE; ++ ++ fb->fb.var.xres = fbwidth; ++ fb->fb.var.yres = fbheight; ++ fb->fb.var.xres_virtual = fbwidth; ++ fb->fb.var.yres_virtual = fbheight; ++ fb->fb.var.bits_per_pixel = fbdepth; ++ fb->fb.var.vmode = FB_VMODE_NONINTERLACED; ++ fb->fb.var.activate = FB_ACTIVATE_NOW; ++ fb->fb.var.nonstd = 0; ++ fb->fb.var.height = fbwidth; ++ fb->fb.var.width = fbheight; ++ fb->fb.var.accel_flags = 0; ++ ++ fb->fb.monspecs.hfmin = 0; ++ fb->fb.monspecs.hfmax = 100000; ++ fb->fb.monspecs.vfmin = 0; ++ fb->fb.monspecs.vfmax = 400; ++ fb->fb.monspecs.dclkmin = 1000000; ++ fb->fb.monspecs.dclkmax = 100000000; ++ ++ bcm2708_fb_set_bitfields(&fb->fb.var); ++ ++ /* ++ * Allocate colourmap. ++ */ ++ ++ fb_set_var(&fb->fb, &fb->fb.var); ++ ++ pr_info("BCM2708FB: registering framebuffer (%dx%d@%d)\n", fbwidth, ++ fbheight, fbdepth); ++ ++ ret = register_framebuffer(&fb->fb); ++ pr_info("BCM2708FB: register framebuffer (%d)\n", ret); ++ if (ret == 0) ++ goto out; ++ ++ pr_info("BCM2708FB: cannot register framebuffer (%d)\n", ret); ++out: ++ return ret; ++} ++ ++static int bcm2708_fb_probe(struct platform_device *dev) ++{ ++ struct bcm2708_fb *fb; ++ int ret; ++ ++ fb = kmalloc(sizeof(struct bcm2708_fb), GFP_KERNEL); ++ if (!fb) { ++ dev_err(&dev->dev, ++ "could not allocate new bcm2708_fb struct\n"); ++ ret = -ENOMEM; ++ goto free_region; ++ } ++ memset(fb, 0, sizeof(struct bcm2708_fb)); ++ ++ fb->dev = dev; ++ ++ ret = bcm2708_fb_register(fb); ++ if (ret == 0) { ++ platform_set_drvdata(dev, fb); ++ goto out; ++ } ++ ++ kfree(fb); ++free_region: ++ dev_err(&dev->dev, "probe failed, err %d\n", ret); ++out: ++ return ret; ++} ++ ++static int bcm2708_fb_remove(struct platform_device *dev) ++{ ++ struct bcm2708_fb *fb = platform_get_drvdata(dev); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ unregister_framebuffer(&fb->fb); ++ ++ dma_free_coherent(NULL, PAGE_ALIGN(sizeof(*fb->info)), (void *)fb->info, ++ fb->dma); ++ kfree(fb); ++ ++ return 0; ++} ++ ++static struct platform_driver bcm2708_fb_driver = { ++ .probe = bcm2708_fb_probe, ++ .remove = bcm2708_fb_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init bcm2708_fb_init(void) ++{ ++ return platform_driver_register(&bcm2708_fb_driver); ++} ++ ++module_init(bcm2708_fb_init); ++ ++static void __exit bcm2708_fb_exit(void) ++{ ++ platform_driver_unregister(&bcm2708_fb_driver); ++} ++ ++module_exit(bcm2708_fb_exit); ++ ++module_param(fbwidth, int, 0644); ++module_param(fbheight, int, 0644); ++module_param(fbdepth, int, 0644); ++ ++MODULE_DESCRIPTION("BCM2708 framebuffer driver"); ++MODULE_LICENSE("GPL"); ++ ++MODULE_PARM_DESC(fbwidth, "Width of ARM Framebuffer"); ++MODULE_PARM_DESC(fbheight, "Height of ARM Framebuffer"); ++MODULE_PARM_DESC(fbdepth, "Bit depth of ARM Framebuffer"); +diff -urN upstream-3.2.21/drivers/video/Kconfig bootc-3.2.21/drivers/video/Kconfig +--- upstream-3.2.21/drivers/video/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/video/Kconfig 2012-06-23 23:52:35.000000000 +0000 +@@ -312,6 +312,20 @@ + help + Support the Permedia2 FIFO disconnect feature. + ++config FB_BCM2708 ++ tristate "BCM2708 framebuffer support" ++ depends on FB && ARM ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This framebuffer device driver is for the BCM2708 framebuffer. ++ ++ If you want to compile this as a module (=code which can be ++ inserted into and removed from the running kernel), say M ++ here and read . The module ++ will be called bcm2708_fb. ++ + config FB_ARMCLCD + tristate "ARM PrimeCell PL110 support" + depends on FB && ARM && ARM_AMBA +diff -urN upstream-3.2.21/drivers/video/logo/logo_linux_clut224.ppm bootc-3.2.21/drivers/video/logo/logo_linux_clut224.ppm +--- upstream-3.2.21/drivers/video/logo/logo_linux_clut224.ppm 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/video/logo/logo_linux_clut224.ppm 2012-06-23 23:52:36.000000000 +0000 +@@ -1,1604 +1,883 @@ + P3 +-# Standard 224-color Linux logo +-80 80 ++63 80 + 255 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 6 6 6 10 10 10 10 10 10 +- 10 10 10 6 6 6 6 6 6 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 10 10 10 14 14 14 +- 22 22 22 26 26 26 30 30 30 34 34 34 +- 30 30 30 30 30 30 26 26 26 18 18 18 +- 14 14 14 10 10 10 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 26 26 26 42 42 42 +- 54 54 54 66 66 66 78 78 78 78 78 78 +- 78 78 78 74 74 74 66 66 66 54 54 54 +- 42 42 42 26 26 26 18 18 18 10 10 10 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 22 22 22 42 42 42 66 66 66 86 86 86 +- 66 66 66 38 38 38 38 38 38 22 22 22 +- 26 26 26 34 34 34 54 54 54 66 66 66 +- 86 86 86 70 70 70 46 46 46 26 26 26 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 26 26 26 +- 50 50 50 82 82 82 58 58 58 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 54 54 54 86 86 86 66 66 66 +- 38 38 38 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 22 22 22 50 50 50 +- 78 78 78 34 34 34 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 6 6 6 70 70 70 +- 78 78 78 46 46 46 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 42 42 42 82 82 82 +- 26 26 26 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 14 14 14 +- 46 46 46 34 34 34 6 6 6 2 2 6 +- 42 42 42 78 78 78 42 42 42 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 30 30 30 66 66 66 58 58 58 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 26 26 26 +- 86 86 86 101 101 101 46 46 46 10 10 10 +- 2 2 6 58 58 58 70 70 70 34 34 34 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 42 42 42 86 86 86 10 10 10 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 30 30 30 +- 94 94 94 94 94 94 58 58 58 26 26 26 +- 2 2 6 6 6 6 78 78 78 54 54 54 +- 22 22 22 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 62 62 62 62 62 62 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 26 26 26 +- 54 54 54 38 38 38 18 18 18 10 10 10 +- 2 2 6 2 2 6 34 34 34 82 82 82 +- 38 38 38 14 14 14 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 30 30 30 78 78 78 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 10 10 10 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 78 78 78 +- 50 50 50 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 14 14 14 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 54 54 54 +- 66 66 66 26 26 26 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 82 82 82 2 2 6 2 2 6 +- 2 2 6 6 6 6 10 10 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 14 14 14 10 10 10 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 18 18 18 +- 82 82 82 34 34 34 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 2 2 6 +- 6 6 6 6 6 6 22 22 22 34 34 34 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 34 34 34 +- 10 10 10 50 50 50 22 22 22 2 2 6 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 86 86 86 42 42 42 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 2 2 6 +- 38 38 38 116 116 116 94 94 94 22 22 22 +- 22 22 22 2 2 6 2 2 6 2 2 6 +- 14 14 14 86 86 86 138 138 138 162 162 162 +-154 154 154 38 38 38 26 26 26 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 86 86 86 46 46 46 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 14 14 14 +-134 134 134 198 198 198 195 195 195 116 116 116 +- 10 10 10 2 2 6 2 2 6 6 6 6 +-101 98 89 187 187 187 210 210 210 218 218 218 +-214 214 214 134 134 134 14 14 14 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 86 86 86 50 50 50 18 18 18 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 54 54 54 +-218 218 218 195 195 195 226 226 226 246 246 246 +- 58 58 58 2 2 6 2 2 6 30 30 30 +-210 210 210 253 253 253 174 174 174 123 123 123 +-221 221 221 234 234 234 74 74 74 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 82 82 82 2 2 6 106 106 106 +-170 170 170 26 26 26 86 86 86 226 226 226 +-123 123 123 10 10 10 14 14 14 46 46 46 +-231 231 231 190 190 190 6 6 6 70 70 70 +- 90 90 90 238 238 238 158 158 158 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 86 86 86 6 6 6 116 116 116 +-106 106 106 6 6 6 70 70 70 149 149 149 +-128 128 128 18 18 18 38 38 38 54 54 54 +-221 221 221 106 106 106 2 2 6 14 14 14 +- 46 46 46 190 190 190 198 198 198 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 62 62 62 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 94 94 94 14 14 14 101 101 101 +-128 128 128 2 2 6 18 18 18 116 116 116 +-118 98 46 121 92 8 121 92 8 98 78 10 +-162 162 162 106 106 106 2 2 6 2 2 6 +- 2 2 6 195 195 195 195 195 195 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 62 62 62 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 1 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 90 90 90 14 14 14 58 58 58 +-210 210 210 26 26 26 54 38 6 154 114 10 +-226 170 11 236 186 11 225 175 15 184 144 12 +-215 174 15 175 146 61 37 26 9 2 2 6 +- 70 70 70 246 246 246 138 138 138 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 66 66 66 26 26 26 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 14 14 14 10 10 10 +-195 195 195 188 164 115 192 133 9 225 175 15 +-239 182 13 234 190 10 232 195 16 232 200 30 +-245 207 45 241 208 19 232 195 16 184 144 12 +-218 194 134 211 206 186 42 42 42 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 50 50 50 74 74 74 30 30 30 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 86 86 86 14 14 14 2 2 6 +-121 87 25 192 133 9 219 162 10 239 182 13 +-236 186 11 232 195 16 241 208 19 244 214 54 +-246 218 60 246 218 38 246 215 20 241 208 19 +-241 208 19 226 184 13 121 87 25 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 50 50 50 82 82 82 34 34 34 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 82 82 82 30 30 30 61 42 6 +-180 123 7 206 145 10 230 174 11 239 182 13 +-234 190 10 238 202 15 241 208 19 246 218 74 +-246 218 38 246 215 20 246 215 20 246 215 20 +-226 184 13 215 174 15 184 144 12 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 26 26 26 94 94 94 42 42 42 14 14 14 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 50 50 50 104 69 6 +-192 133 9 216 158 10 236 178 12 236 186 11 +-232 195 16 241 208 19 244 214 54 245 215 43 +-246 215 20 246 215 20 241 208 19 198 155 10 +-200 144 11 216 158 10 156 118 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 90 90 90 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 46 46 46 22 22 22 +-137 92 6 210 162 10 239 182 13 238 190 10 +-238 202 15 241 208 19 246 215 20 246 215 20 +-241 208 19 203 166 17 185 133 11 210 150 10 +-216 158 10 210 150 10 102 78 10 2 2 6 +- 6 6 6 54 54 54 14 14 14 2 2 6 +- 2 2 6 62 62 62 74 74 74 30 30 30 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 78 78 78 50 50 50 6 6 6 +- 94 70 30 139 102 15 190 146 13 226 184 13 +-232 200 30 232 195 16 215 174 15 190 146 13 +-168 122 10 192 133 9 210 150 10 213 154 11 +-202 150 34 182 157 106 101 98 89 2 2 6 +- 2 2 6 78 78 78 116 116 116 58 58 58 +- 2 2 6 22 22 22 90 90 90 46 46 46 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 50 50 50 6 6 6 +-128 128 128 174 154 114 156 107 11 168 122 10 +-198 155 10 184 144 12 197 138 11 200 144 11 +-206 145 10 206 145 10 197 138 11 188 164 115 +-195 195 195 198 198 198 174 174 174 14 14 14 +- 2 2 6 22 22 22 116 116 116 116 116 116 +- 22 22 22 2 2 6 74 74 74 70 70 70 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 101 101 101 26 26 26 10 10 10 +-138 138 138 190 190 190 174 154 114 156 107 11 +-197 138 11 200 144 11 197 138 11 192 133 9 +-180 123 7 190 142 34 190 178 144 187 187 187 +-202 202 202 221 221 221 214 214 214 66 66 66 +- 2 2 6 2 2 6 50 50 50 62 62 62 +- 6 6 6 2 2 6 10 10 10 90 90 90 +- 50 50 50 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 34 34 34 +- 74 74 74 74 74 74 2 2 6 6 6 6 +-144 144 144 198 198 198 190 190 190 178 166 146 +-154 121 60 156 107 11 156 107 11 168 124 44 +-174 154 114 187 187 187 190 190 190 210 210 210 +-246 246 246 253 253 253 253 253 253 182 182 182 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 62 62 62 +- 74 74 74 34 34 34 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 10 10 10 22 22 22 54 54 54 +- 94 94 94 18 18 18 2 2 6 46 46 46 +-234 234 234 221 221 221 190 190 190 190 190 190 +-190 190 190 187 187 187 187 187 187 190 190 190 +-190 190 190 195 195 195 214 214 214 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +- 82 82 82 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 14 14 14 +- 86 86 86 54 54 54 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 46 46 46 90 90 90 +- 46 46 46 18 18 18 6 6 6 182 182 182 +-253 253 253 246 246 246 206 206 206 190 190 190 +-190 190 190 190 190 190 190 190 190 190 190 190 +-206 206 206 231 231 231 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-202 202 202 14 14 14 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 42 42 42 86 86 86 42 42 42 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 14 14 14 38 38 38 74 74 74 66 66 66 +- 2 2 6 6 6 6 90 90 90 250 250 250 +-253 253 253 253 253 253 238 238 238 198 198 198 +-190 190 190 190 190 190 195 195 195 221 221 221 +-246 246 246 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 82 82 82 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 78 78 78 70 70 70 34 34 34 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 34 34 34 66 66 66 78 78 78 6 6 6 +- 2 2 6 18 18 18 218 218 218 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-226 226 226 231 231 231 246 246 246 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 178 178 178 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 18 18 18 90 90 90 62 62 62 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 26 26 26 +- 58 58 58 90 90 90 18 18 18 2 2 6 +- 2 2 6 110 110 110 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 231 231 231 18 18 18 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 94 94 94 +- 54 54 54 26 26 26 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 22 22 22 50 50 50 +- 90 90 90 26 26 26 2 2 6 2 2 6 +- 14 14 14 195 195 195 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 242 242 242 54 54 54 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +- 86 86 86 50 50 50 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 38 38 38 82 82 82 +- 34 34 34 2 2 6 2 2 6 2 2 6 +- 42 42 42 195 195 195 246 246 246 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 242 242 242 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 246 246 246 238 238 238 +-226 226 226 231 231 231 101 101 101 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 38 38 38 82 82 82 42 42 42 14 14 14 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 26 26 26 62 62 62 66 66 66 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 70 70 70 170 170 170 206 206 206 234 234 234 +-246 246 246 250 250 250 250 250 250 238 238 238 +-226 226 226 231 231 231 238 238 238 250 250 250 +-250 250 250 250 250 250 246 246 246 231 231 231 +-214 214 214 206 206 206 202 202 202 202 202 202 +-198 198 198 202 202 202 182 182 182 18 18 18 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 62 62 62 66 66 66 30 30 30 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 42 42 42 82 82 82 18 18 18 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 94 94 94 182 182 182 218 218 218 242 242 242 +-250 250 250 253 253 253 253 253 253 250 250 250 +-234 234 234 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-238 238 238 226 226 226 210 210 210 202 202 202 +-195 195 195 195 195 195 210 210 210 158 158 158 +- 6 6 6 14 14 14 50 50 50 14 14 14 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 86 86 86 46 46 46 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 54 54 54 70 70 70 2 2 6 +- 2 2 6 10 10 10 2 2 6 22 22 22 +-166 166 166 231 231 231 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-231 231 231 206 206 206 198 198 198 226 226 226 +- 94 94 94 2 2 6 6 6 6 38 38 38 +- 30 30 30 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 62 62 62 66 66 66 +- 26 26 26 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 74 74 74 50 50 50 2 2 6 +- 26 26 26 26 26 26 2 2 6 106 106 106 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 246 246 246 218 218 218 202 202 202 +-210 210 210 14 14 14 2 2 6 2 2 6 +- 30 30 30 22 22 22 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 86 86 86 +- 42 42 42 14 14 14 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 90 90 90 22 22 22 2 2 6 +- 42 42 42 2 2 6 18 18 18 218 218 218 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 250 250 250 221 221 221 +-218 218 218 101 101 101 2 2 6 14 14 14 +- 18 18 18 38 38 38 10 10 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 78 78 78 +- 58 58 58 22 22 22 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 54 54 54 82 82 82 2 2 6 26 26 26 +- 22 22 22 2 2 6 123 123 123 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-238 238 238 198 198 198 6 6 6 38 38 38 +- 58 58 58 26 26 26 38 38 38 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 78 78 78 30 30 30 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 30 30 30 +- 74 74 74 58 58 58 2 2 6 42 42 42 +- 2 2 6 22 22 22 231 231 231 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 246 246 246 46 46 46 38 38 38 +- 42 42 42 14 14 14 38 38 38 14 14 14 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 86 86 86 46 46 46 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 42 42 42 +- 90 90 90 18 18 18 18 18 18 26 26 26 +- 2 2 6 116 116 116 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 250 250 250 238 238 238 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 94 94 94 6 6 6 +- 2 2 6 2 2 6 10 10 10 34 34 34 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 10 10 10 26 26 26 66 66 66 +- 82 82 82 2 2 6 38 38 38 6 6 6 +- 14 14 14 210 210 210 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 246 246 246 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 144 144 144 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 42 42 42 74 74 74 30 30 30 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 42 42 42 90 90 90 +- 26 26 26 6 6 6 42 42 42 2 2 6 +- 74 74 74 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 242 242 242 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 182 182 182 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 10 10 10 86 86 86 38 38 38 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 26 26 26 66 66 66 82 82 82 +- 2 2 6 22 22 22 18 18 18 2 2 6 +-149 149 149 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 206 206 206 2 2 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 86 86 86 46 46 46 14 14 14 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 18 18 18 46 46 46 86 86 86 18 18 18 +- 2 2 6 34 34 34 10 10 10 6 6 6 +-210 210 210 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 221 221 221 6 6 6 +- 2 2 6 2 2 6 6 6 6 30 30 30 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 82 82 82 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 26 26 26 66 66 66 62 62 62 2 2 6 +- 2 2 6 38 38 38 10 10 10 26 26 26 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 238 238 238 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 6 6 6 +- 2 2 6 2 2 6 10 10 10 30 30 30 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 58 58 58 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 78 78 78 6 6 6 2 2 6 +- 2 2 6 46 46 46 14 14 14 42 42 42 +-246 246 246 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 10 10 10 +- 2 2 6 2 2 6 22 22 22 14 14 14 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 62 62 62 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 74 74 74 2 2 6 2 2 6 +- 14 14 14 70 70 70 34 34 34 62 62 62 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 14 14 14 +- 2 2 6 2 2 6 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 62 62 62 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 54 54 54 62 62 62 2 2 6 2 2 6 +- 2 2 6 30 30 30 46 46 46 70 70 70 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 226 226 226 10 10 10 +- 2 2 6 6 6 6 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 58 58 58 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 58 58 58 62 62 62 2 2 6 2 2 6 +- 2 2 6 2 2 6 30 30 30 78 78 78 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 206 206 206 2 2 6 +- 22 22 22 34 34 34 18 14 6 22 22 22 +- 26 26 26 18 18 18 6 6 6 2 2 6 +- 2 2 6 82 82 82 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 26 26 26 +- 62 62 62 106 106 106 74 54 14 185 133 11 +-210 162 10 121 92 8 6 6 6 62 62 62 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 158 158 158 18 18 18 +- 14 14 14 2 2 6 2 2 6 2 2 6 +- 6 6 6 18 18 18 66 66 66 38 38 38 +- 6 6 6 94 94 94 50 50 50 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 10 10 10 10 10 10 18 18 18 38 38 38 +- 78 78 78 142 134 106 216 158 10 242 186 14 +-246 190 14 246 190 14 156 118 10 10 10 10 +- 90 90 90 238 238 238 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 230 190 +-238 204 91 238 204 91 181 142 44 37 26 9 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 38 38 38 46 46 46 +- 26 26 26 106 106 106 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 22 22 22 +- 30 30 30 38 38 38 50 50 50 70 70 70 +-106 106 106 190 142 34 226 170 11 242 186 14 +-246 190 14 246 190 14 246 190 14 154 114 10 +- 6 6 6 74 74 74 226 226 226 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 228 184 62 +-241 196 14 241 208 19 232 195 16 38 30 10 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 30 30 30 26 26 26 +-203 166 17 154 142 90 66 66 66 26 26 26 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 38 38 38 58 58 58 +- 78 78 78 86 86 86 101 101 101 123 123 123 +-175 146 61 210 150 10 234 174 13 246 186 14 +-246 190 14 246 190 14 246 190 14 238 190 10 +-102 78 10 2 2 6 46 46 46 198 198 198 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 224 178 62 +-242 186 14 241 196 14 210 166 10 22 18 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 6 6 6 121 92 8 +-238 202 15 232 195 16 82 82 82 34 34 34 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 38 38 38 70 70 70 154 122 46 +-190 142 34 200 144 11 197 138 11 197 138 11 +-213 154 11 226 170 11 242 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-225 175 15 46 32 6 2 2 6 22 22 22 +-158 158 158 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 242 242 242 224 178 62 +-239 182 13 236 186 11 213 154 11 46 32 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 61 42 6 225 175 15 +-238 190 10 236 186 11 112 100 78 42 42 42 +- 14 14 14 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 54 54 54 154 122 46 213 154 11 +-226 170 11 230 174 11 226 170 11 226 170 11 +-236 178 12 242 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-241 196 14 184 144 12 10 10 10 2 2 6 +- 6 6 6 116 116 116 242 242 242 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 231 231 231 198 198 198 214 170 54 +-236 178 12 236 178 12 210 150 10 137 92 6 +- 18 14 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 70 47 6 200 144 11 236 178 12 +-239 182 13 239 182 13 124 112 88 58 58 58 +- 22 22 22 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 70 70 70 180 133 36 226 170 11 +-239 182 13 242 186 14 242 186 14 246 186 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 232 195 16 98 70 6 2 2 6 +- 2 2 6 2 2 6 66 66 66 221 221 221 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 206 206 206 198 198 198 214 166 58 +-230 174 11 230 174 11 216 158 10 192 133 9 +-163 110 8 116 81 8 102 78 10 116 81 8 +-167 114 7 197 138 11 226 170 11 239 182 13 +-242 186 14 242 186 14 162 146 94 78 78 78 +- 34 34 34 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 30 30 30 78 78 78 190 142 34 226 170 11 +-239 182 13 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 241 196 14 203 166 17 22 18 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +-218 218 218 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 206 206 206 198 198 198 202 162 69 +-226 170 11 236 178 12 224 166 10 210 150 10 +-200 144 11 197 138 11 192 133 9 197 138 11 +-210 150 10 226 170 11 242 186 14 246 190 14 +-246 190 14 246 186 14 225 175 15 124 112 88 +- 62 62 62 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 174 135 50 224 166 10 +-239 182 13 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 241 196 14 139 102 15 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 78 78 78 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 214 214 214 198 198 198 190 150 46 +-219 162 10 236 178 12 234 174 13 224 166 10 +-216 158 10 213 154 11 213 154 11 216 158 10 +-226 170 11 239 182 13 246 190 14 246 190 14 +-246 190 14 246 190 14 242 186 14 206 162 42 +-101 101 101 58 58 58 30 30 30 14 14 14 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 74 74 74 174 135 50 216 158 10 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 241 196 14 226 184 13 +- 61 42 6 2 2 6 2 2 6 2 2 6 +- 22 22 22 238 238 238 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 226 226 226 187 187 187 180 133 36 +-216 158 10 236 178 12 239 182 13 236 178 12 +-230 174 11 226 170 11 226 170 11 230 174 11 +-236 178 12 242 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 186 14 239 182 13 +-206 162 42 106 106 106 66 66 66 34 34 34 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 26 26 26 70 70 70 163 133 67 213 154 11 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 241 196 14 +-190 146 13 18 14 6 2 2 6 2 2 6 +- 46 46 46 246 246 246 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 221 221 221 86 86 86 156 107 11 +-216 158 10 236 178 12 242 186 14 246 186 14 +-242 186 14 239 182 13 239 182 13 242 186 14 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-242 186 14 225 175 15 142 122 72 66 66 66 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 26 26 26 70 70 70 163 133 67 210 150 10 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-232 195 16 121 92 8 34 34 34 106 106 106 +-221 221 221 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-242 242 242 82 82 82 18 14 6 163 110 8 +-216 158 10 236 178 12 242 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 242 186 14 163 133 67 +- 46 46 46 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 163 133 67 210 150 10 +-236 178 12 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-241 196 14 215 174 15 190 178 144 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 218 218 218 +- 58 58 58 2 2 6 22 18 6 167 114 7 +-216 158 10 236 178 12 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 186 14 242 186 14 190 150 46 +- 54 54 54 22 22 22 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 38 38 38 86 86 86 180 133 36 213 154 11 +-236 178 12 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 232 195 16 190 146 13 214 214 214 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 170 170 170 26 26 26 +- 2 2 6 2 2 6 37 26 9 163 110 8 +-219 162 10 239 182 13 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 236 178 12 224 166 10 142 122 72 +- 46 46 46 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 109 106 95 192 133 9 224 166 10 +-242 186 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-242 186 14 226 184 13 210 162 10 142 110 46 +-226 226 226 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-198 198 198 66 66 66 2 2 6 2 2 6 +- 2 2 6 2 2 6 50 34 6 156 107 11 +-219 162 10 239 182 13 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 242 186 14 +-234 174 13 213 154 11 154 122 46 66 66 66 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 58 58 58 154 121 60 206 145 10 234 174 13 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 236 178 12 210 162 10 163 110 8 +- 61 42 6 138 138 138 218 218 218 250 250 250 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 210 210 210 144 144 144 66 66 66 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 61 42 6 163 110 8 +-216 158 10 236 178 12 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 239 182 13 230 174 11 216 158 10 +-190 142 34 124 112 88 70 70 70 38 38 38 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 62 62 62 168 124 44 206 145 10 224 166 10 +-236 178 12 239 182 13 242 186 14 242 186 14 +-246 186 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 236 178 12 216 158 10 175 118 6 +- 80 54 7 2 2 6 6 6 6 30 30 30 +- 54 54 54 62 62 62 50 50 50 38 38 38 +- 14 14 14 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 80 54 7 167 114 7 +-213 154 11 236 178 12 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 242 186 14 239 182 13 239 182 13 +-230 174 11 210 150 10 174 135 50 124 112 88 +- 82 82 82 54 54 54 34 34 34 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 158 118 36 192 133 9 200 144 11 +-216 158 10 219 162 10 224 166 10 226 170 11 +-230 174 11 236 178 12 239 182 13 239 182 13 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 230 174 11 210 150 10 163 110 8 +-104 69 6 10 10 10 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 91 60 6 167 114 7 +-206 145 10 230 174 11 242 186 14 246 190 14 +-246 190 14 246 190 14 246 186 14 242 186 14 +-239 182 13 230 174 11 224 166 10 213 154 11 +-180 133 36 124 112 88 86 86 86 58 58 58 +- 38 38 38 22 22 22 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 34 34 34 70 70 70 138 110 50 158 118 36 +-167 114 7 180 123 7 192 133 9 197 138 11 +-200 144 11 206 145 10 213 154 11 219 162 10 +-224 166 10 230 174 11 239 182 13 242 186 14 +-246 186 14 246 186 14 246 186 14 246 186 14 +-239 182 13 216 158 10 185 133 11 152 99 6 +-104 69 6 18 14 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 80 54 7 152 99 6 +-192 133 9 219 162 10 236 178 12 239 182 13 +-246 186 14 242 186 14 239 182 13 236 178 12 +-224 166 10 206 145 10 192 133 9 154 121 60 +- 94 94 94 62 62 62 42 42 42 22 22 22 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 18 18 18 34 34 34 58 58 58 78 78 78 +-101 98 89 124 112 88 142 110 46 156 107 11 +-163 110 8 167 114 7 175 118 6 180 123 7 +-185 133 11 197 138 11 210 150 10 219 162 10 +-226 170 11 236 178 12 236 178 12 234 174 13 +-219 162 10 197 138 11 163 110 8 130 83 6 +- 91 60 6 10 10 10 2 2 6 2 2 6 +- 18 18 18 38 38 38 38 38 38 38 38 38 +- 38 38 38 38 38 38 38 38 38 38 38 38 +- 38 38 38 38 38 38 26 26 26 2 2 6 +- 2 2 6 6 6 6 70 47 6 137 92 6 +-175 118 6 200 144 11 219 162 10 230 174 11 +-234 174 13 230 174 11 219 162 10 210 150 10 +-192 133 9 163 110 8 124 112 88 82 82 82 +- 50 50 50 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 22 22 22 34 34 34 +- 42 42 42 58 58 58 74 74 74 86 86 86 +-101 98 89 122 102 70 130 98 46 121 87 25 +-137 92 6 152 99 6 163 110 8 180 123 7 +-185 133 11 197 138 11 206 145 10 200 144 11 +-180 123 7 156 107 11 130 83 6 104 69 6 +- 50 34 6 54 54 54 110 110 110 101 98 89 +- 86 86 86 82 82 82 78 78 78 78 78 78 +- 78 78 78 78 78 78 78 78 78 78 78 78 +- 78 78 78 82 82 82 86 86 86 94 94 94 +-106 106 106 101 101 101 86 66 34 124 80 6 +-156 107 11 180 123 7 192 133 9 200 144 11 +-206 145 10 200 144 11 192 133 9 175 118 6 +-139 102 15 109 106 95 70 70 70 42 42 42 +- 22 22 22 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 10 10 10 +- 14 14 14 22 22 22 30 30 30 38 38 38 +- 50 50 50 62 62 62 74 74 74 90 90 90 +-101 98 89 112 100 78 121 87 25 124 80 6 +-137 92 6 152 99 6 152 99 6 152 99 6 +-138 86 6 124 80 6 98 70 6 86 66 30 +-101 98 89 82 82 82 58 58 58 46 46 46 +- 38 38 38 34 34 34 34 34 34 34 34 34 +- 34 34 34 34 34 34 34 34 34 34 34 34 +- 34 34 34 34 34 34 38 38 38 42 42 42 +- 54 54 54 82 82 82 94 86 76 91 60 6 +-134 86 6 156 107 11 167 114 7 175 118 6 +-175 118 6 167 114 7 152 99 6 121 87 25 +-101 98 89 62 62 62 34 34 34 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 6 6 6 10 10 10 +- 18 18 18 22 22 22 30 30 30 42 42 42 +- 50 50 50 66 66 66 86 86 86 101 98 89 +-106 86 58 98 70 6 104 69 6 104 69 6 +-104 69 6 91 60 6 82 62 34 90 90 90 +- 62 62 62 38 38 38 22 22 22 14 14 14 +- 10 10 10 10 10 10 10 10 10 10 10 10 +- 10 10 10 10 10 10 6 6 6 10 10 10 +- 10 10 10 10 10 10 10 10 10 14 14 14 +- 22 22 22 42 42 42 70 70 70 89 81 66 +- 80 54 7 104 69 6 124 80 6 137 92 6 +-134 86 6 116 81 8 100 82 52 86 86 86 +- 58 58 58 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 10 10 10 14 14 14 +- 18 18 18 26 26 26 38 38 38 54 54 54 +- 70 70 70 86 86 86 94 86 76 89 81 66 +- 89 81 66 86 86 86 74 74 74 50 50 50 +- 30 30 30 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 34 34 34 58 58 58 +- 82 82 82 89 81 66 89 81 66 89 81 66 +- 94 86 66 94 86 76 74 74 74 50 50 50 +- 26 26 26 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 6 6 6 14 14 14 18 18 18 +- 30 30 30 38 38 38 46 46 46 54 54 54 +- 50 50 50 42 42 42 30 30 30 18 18 18 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 26 26 26 +- 38 38 38 50 50 50 58 58 58 58 58 58 +- 54 54 54 42 42 42 30 30 30 18 18 18 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 6 6 6 10 10 10 14 14 14 18 18 18 +- 18 18 18 14 14 14 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 14 14 14 18 18 18 22 22 22 22 22 22 +- 18 18 18 14 14 14 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 1 0 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++10 15 3 2 3 1 12 18 4 42 61 14 19 27 6 11 16 4 ++38 55 13 10 15 3 3 4 1 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 3 1 ++12 18 4 1 1 0 23 34 8 31 45 11 10 15 3 32 47 11 ++34 49 12 3 4 1 3 4 1 3 4 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 10 15 3 29 42 10 26 37 9 12 18 4 ++55 80 19 81 118 28 55 80 19 92 132 31 106 153 36 69 100 23 ++100 144 34 80 116 27 42 61 14 81 118 28 23 34 8 27 40 9 ++15 21 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 1 0 29 42 10 15 21 5 50 72 17 ++74 107 25 45 64 15 102 148 35 80 116 27 84 121 28 111 160 38 ++69 100 23 65 94 22 81 118 28 29 42 10 17 25 6 29 42 10 ++23 34 8 2 3 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 4 1 ++15 21 5 15 21 5 34 49 12 101 146 34 111 161 38 97 141 33 ++97 141 33 119 172 41 117 170 40 116 167 40 118 170 40 118 171 40 ++117 169 40 118 170 40 111 160 38 118 170 40 96 138 32 89 128 30 ++81 118 28 11 16 4 10 15 3 1 1 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 4 1 3 4 1 34 49 12 101 146 34 79 115 27 111 160 38 ++114 165 39 113 163 39 118 170 40 117 169 40 118 171 40 117 169 40 ++116 167 40 119 172 41 113 163 39 92 132 31 105 151 36 113 163 39 ++75 109 26 19 27 6 16 23 5 11 16 4 0 1 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 ++80 116 27 106 153 36 105 151 36 114 165 39 118 170 40 118 171 40 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 170 40 117 169 40 118 170 40 118 170 40 ++117 170 40 75 109 26 75 109 26 34 49 12 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 4 1 ++64 92 22 65 94 22 100 144 34 118 171 40 118 170 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 41 118 170 40 117 169 40 ++109 158 37 105 151 36 104 150 35 47 69 16 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++42 61 14 115 167 39 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 117 170 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 96 138 32 17 25 6 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 47 69 16 ++114 165 39 117 168 40 117 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 119 172 41 96 138 32 12 18 4 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 ++32 47 11 105 151 36 118 170 40 117 169 40 117 169 40 116 168 40 ++109 157 37 111 160 38 117 169 40 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 40 69 100 23 2 3 1 ++0 0 0 0 0 0 0 0 0 0 0 0 19 27 6 101 146 34 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 170 40 ++118 171 40 115 166 39 107 154 36 111 161 38 117 169 40 117 169 40 ++117 169 40 118 171 40 75 109 26 19 27 6 2 3 1 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 16 23 5 ++89 128 30 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++111 160 38 92 132 31 79 115 27 96 138 32 115 166 39 119 171 41 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 170 40 109 157 37 26 37 9 ++0 0 0 0 0 0 0 0 0 0 0 0 64 92 22 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 170 40 118 171 40 109 157 37 ++89 128 30 81 118 28 100 144 34 115 166 39 117 169 40 117 169 40 ++117 169 40 117 170 40 113 163 39 60 86 20 1 1 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++27 40 9 96 138 32 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 117 169 40 101 146 34 67 96 23 55 80 19 84 121 28 ++113 163 39 119 171 41 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 119 171 41 65 94 22 ++0 0 0 0 0 0 0 0 0 15 21 5 101 146 34 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 118 171 40 104 150 35 69 100 23 53 76 18 ++81 118 28 111 160 38 118 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 114 165 39 69 100 23 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++31 45 11 77 111 26 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 116 168 40 92 132 31 47 69 16 ++38 55 13 81 118 28 113 163 39 119 171 41 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 41 92 132 31 ++10 15 3 0 0 0 0 0 0 36 52 12 115 166 39 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 ++118 171 40 102 148 35 64 92 22 34 49 12 65 94 22 106 153 36 ++118 171 40 117 170 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 170 40 107 154 36 55 80 19 15 21 5 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++29 42 10 101 146 34 118 171 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 40 113 163 39 ++75 109 26 27 40 9 36 52 12 89 128 30 116 167 40 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 104 150 35 ++16 23 5 0 0 0 0 0 0 53 76 18 118 171 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 119 171 41 109 157 37 ++67 96 23 23 34 8 42 61 14 96 138 32 118 170 40 118 170 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 74 107 25 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 31 45 11 101 146 34 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++119 171 41 102 148 35 47 69 16 14 20 5 50 72 17 102 148 35 ++118 171 40 117 169 40 117 169 40 117 169 40 118 170 40 102 148 35 ++15 21 5 0 0 0 0 0 0 50 72 17 118 170 40 117 169 40 ++117 169 40 117 169 40 118 170 40 116 167 40 84 121 28 27 40 9 ++19 27 6 74 107 25 114 165 39 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 75 109 26 10 15 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 38 55 13 102 148 35 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 115 167 39 77 111 26 17 25 6 19 27 6 ++77 111 26 115 166 39 118 170 40 117 169 40 119 172 41 81 118 28 ++3 4 1 0 0 0 0 0 0 27 40 9 111 160 38 118 170 40 ++117 169 40 118 171 40 105 151 36 50 72 17 10 15 3 38 55 13 ++100 144 34 118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 79 115 27 15 21 5 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 10 15 3 64 92 22 111 160 38 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 40 96 138 32 32 47 11 ++3 4 1 50 72 17 107 154 36 120 173 41 105 151 36 31 45 11 ++0 0 0 0 0 0 0 0 0 3 4 1 65 94 22 117 169 40 ++118 170 40 89 128 30 26 37 9 3 4 1 60 86 20 111 161 38 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++97 141 33 36 52 12 1 1 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 14 20 5 75 109 26 117 168 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 40 107 154 36 ++45 64 15 2 3 1 31 45 11 75 109 26 32 47 11 0 1 0 ++0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 55 80 19 ++65 94 22 11 16 4 11 16 4 75 109 26 116 168 40 118 170 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 107 154 36 ++47 69 16 3 4 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 12 18 4 69 100 23 111 161 38 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 ++111 160 38 50 72 17 2 3 1 2 3 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++1 1 0 12 18 4 81 118 28 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 170 40 118 171 40 101 146 34 ++42 61 14 2 3 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 3 4 1 36 52 12 89 128 30 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 171 41 101 146 34 14 20 5 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 47 69 16 118 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 170 40 111 160 38 69 100 23 19 27 6 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 11 16 4 69 100 23 ++115 167 39 119 172 41 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++119 172 41 75 109 26 3 4 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 23 34 8 106 153 36 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 119 172 41 105 151 36 42 61 14 2 3 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 15 21 5 ++45 64 15 80 116 27 114 165 39 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 119 172 41 ++97 141 33 20 30 7 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 1 1 0 53 76 18 114 165 39 118 171 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 171 40 104 150 35 64 92 22 31 45 11 10 15 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 36 52 12 97 141 33 109 158 37 113 163 39 116 168 40 ++117 169 40 117 170 40 118 170 40 119 172 41 115 167 39 84 121 28 ++23 34 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 4 1 50 72 17 102 148 35 118 171 40 ++119 171 41 118 170 40 117 169 40 117 169 40 115 166 39 111 161 38 ++109 157 37 79 115 27 12 18 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 3 4 1 15 21 5 23 34 8 45 64 15 106 153 36 ++116 167 40 111 160 38 101 146 34 79 115 27 42 61 14 10 15 3 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 1 0 20 30 7 60 86 20 ++89 128 30 106 153 36 113 163 39 117 169 40 84 121 28 29 42 10 ++19 27 6 10 15 3 2 3 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 16 23 5 38 55 13 ++36 52 12 26 37 9 12 18 4 2 3 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 0 0 19 2 7 52 5 18 ++78 7 27 88 8 31 81 7 29 56 5 19 25 2 9 3 0 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 4 1 19 27 6 31 45 11 38 55 13 32 47 11 3 4 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 ++9 0 3 12 1 4 9 0 3 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 28 3 10 99 9 35 156 14 55 182 16 64 ++189 17 66 190 17 67 189 17 66 184 17 65 166 15 58 118 13 41 ++45 4 16 3 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 11 1 4 52 5 18 101 9 35 134 12 47 ++151 14 53 154 14 54 151 14 53 113 10 40 11 1 4 0 0 0 ++3 0 1 67 6 24 159 14 56 190 17 67 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 191 17 67 ++174 16 61 101 9 35 14 1 5 0 0 0 35 3 12 108 10 38 ++122 11 43 122 11 43 112 10 39 87 8 30 50 5 17 13 1 5 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 0 1 56 5 19 141 13 49 182 16 64 191 17 67 191 17 67 ++190 17 67 190 17 67 191 17 67 113 10 40 3 0 1 1 0 0 ++79 7 28 180 16 63 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 188 17 66 122 11 43 11 1 4 41 4 14 176 16 62 ++191 17 67 191 17 67 191 17 67 190 17 67 181 16 63 146 13 51 ++75 7 26 10 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 1 2 ++90 8 32 178 16 62 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 141 13 49 22 2 8 0 0 0 41 4 14 ++173 16 61 190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 88 8 31 1 0 0 89 8 31 ++185 17 65 189 17 66 188 17 66 188 17 66 189 17 66 191 17 67 ++186 17 65 124 11 43 25 2 9 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 89 8 31 ++184 17 65 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 151 14 53 34 3 12 0 0 0 0 0 0 79 7 28 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 191 17 67 146 13 51 9 1 3 7 1 2 ++108 10 38 187 17 66 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 141 13 49 22 2 8 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 52 5 18 176 16 62 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++151 14 53 38 3 13 0 0 0 0 0 0 0 0 0 50 5 17 ++180 16 63 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 191 17 67 141 13 49 7 1 3 0 0 0 ++11 1 4 112 10 39 187 17 66 189 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 113 10 40 5 0 2 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 7 1 3 132 12 46 191 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 146 13 51 ++35 3 12 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++101 9 35 185 17 65 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 180 16 63 67 6 24 0 0 0 0 0 0 ++0 0 0 11 1 4 108 10 38 186 17 65 189 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 180 16 63 56 5 19 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 44 4 15 177 16 62 189 17 66 ++188 17 66 188 17 66 189 17 66 189 17 66 134 12 47 28 3 10 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++8 1 3 79 7 28 159 14 56 188 17 66 191 17 67 190 17 67 ++189 17 66 189 17 66 189 17 66 189 17 66 190 17 67 191 17 67 ++188 17 66 158 14 55 72 7 25 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 8 1 3 95 9 33 182 16 64 189 17 67 ++188 17 66 188 17 66 188 17 66 191 17 67 122 11 43 3 0 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 88 8 31 190 17 67 188 17 66 ++188 17 66 189 17 66 185 17 65 113 10 40 18 2 6 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 1 0 0 24 2 8 77 7 27 124 11 43 154 14 54 ++168 15 59 173 16 61 173 16 61 168 15 59 154 14 54 124 11 43 ++77 7 27 22 2 8 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 77 7 27 173 16 61 ++190 17 67 188 17 66 188 17 66 190 17 67 164 15 57 23 2 8 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 0 0 118 13 41 191 17 67 188 17 66 ++190 17 67 174 16 61 87 8 30 8 1 3 0 0 0 0 0 0 ++0 0 0 0 0 0 10 1 4 29 3 10 40 4 14 36 3 13 ++18 2 6 2 0 1 0 0 0 0 0 0 3 0 1 14 1 5 ++26 2 9 33 3 11 32 3 11 25 2 9 13 1 5 3 0 1 ++0 0 0 14 1 5 56 5 19 95 9 33 109 10 38 101 9 35 ++77 7 27 35 3 12 5 0 2 0 0 0 1 0 0 56 5 19 ++156 14 55 190 17 67 188 17 66 188 17 66 182 16 64 50 5 17 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 134 12 47 191 17 67 189 17 66 ++151 14 53 52 5 18 2 0 1 0 0 0 0 0 0 1 0 0 ++28 3 10 90 8 32 146 13 51 170 15 60 178 16 62 174 16 61 ++158 14 55 112 10 39 40 4 14 1 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 ++56 5 19 146 13 51 183 17 64 191 17 67 191 17 67 191 17 67 ++188 17 66 173 16 61 122 11 43 41 4 14 1 0 0 0 0 0 ++30 3 10 124 11 43 185 17 65 190 17 67 187 17 66 67 6 24 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 6 1 2 134 12 47 168 15 59 99 9 35 ++21 2 7 0 0 0 0 0 0 0 0 0 6 1 2 77 7 27 ++162 15 57 190 17 67 191 17 67 189 17 66 189 17 66 189 17 66 ++190 17 67 191 17 67 169 15 59 75 7 26 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 79 7 28 ++178 16 62 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 191 17 67 170 15 60 79 7 28 5 0 2 ++0 0 0 10 1 3 78 7 27 159 14 56 188 17 66 75 7 26 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 0 0 35 3 12 29 3 10 2 0 1 ++0 0 0 0 0 0 0 0 0 9 1 3 101 9 35 183 17 64 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 178 16 63 67 6 23 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 52 5 18 174 16 61 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 182 16 64 89 8 31 ++4 0 1 0 0 0 0 0 0 25 2 9 73 7 26 31 3 11 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 4 0 1 98 9 34 187 17 66 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 158 14 55 25 2 9 ++0 0 0 0 0 0 0 0 0 8 1 3 134 12 47 191 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 180 16 63 ++68 6 24 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 6 1 2 19 2 7 3 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 65 6 23 180 16 63 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 83 8 29 ++0 0 0 0 0 0 0 0 0 41 4 14 177 16 62 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++159 14 56 28 3 10 0 0 0 0 0 0 0 0 0 23 2 8 ++41 4 14 5 0 2 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++23 2 8 113 10 40 159 14 56 65 6 23 0 0 0 0 0 0 ++0 0 0 16 1 6 146 13 51 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 132 12 46 ++5 0 2 0 0 0 0 0 0 77 7 27 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 98 9 34 0 0 0 0 0 0 12 1 4 134 12 47 ++178 16 63 108 10 38 16 1 6 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 3 10 ++141 13 49 190 17 67 191 17 67 134 12 47 6 1 2 0 0 0 ++0 0 0 68 6 24 186 17 65 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 156 14 55 ++14 1 5 0 0 0 0 0 0 98 9 34 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 156 14 55 19 2 7 0 0 0 47 4 16 181 16 63 ++190 17 67 189 17 66 126 14 44 17 2 6 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 16 1 6 134 12 47 ++191 17 67 188 17 66 190 17 67 162 15 57 19 2 7 0 0 0 ++3 0 1 123 11 43 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 163 15 57 ++20 2 7 0 0 0 0 0 0 101 9 35 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 182 16 64 52 5 18 0 0 0 73 7 26 188 17 66 ++188 17 66 188 17 66 189 17 66 109 10 38 5 0 2 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 95 9 33 189 17 66 ++188 17 66 188 17 66 189 17 66 171 15 60 29 3 10 0 0 0 ++16 1 6 156 14 55 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 158 14 55 ++17 2 6 0 0 0 0 0 0 85 8 30 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 81 7 29 0 0 0 85 8 30 190 17 67 ++188 17 66 188 17 66 189 17 66 180 16 63 56 5 19 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 25 2 9 162 15 57 190 17 67 ++188 17 66 188 17 66 189 17 66 173 16 61 31 3 11 0 0 0 ++30 3 10 171 15 60 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 141 13 49 ++7 1 2 0 0 0 0 0 0 56 5 19 183 17 64 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 98 9 34 0 0 0 88 8 31 190 17 67 ++188 17 66 188 17 66 188 17 66 191 17 67 124 11 43 5 0 2 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 68 6 24 187 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 170 15 60 28 3 10 0 0 0 ++34 3 12 174 16 61 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 101 9 35 ++0 0 0 0 0 0 0 0 0 21 2 7 159 14 56 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 98 9 34 0 0 0 81 7 29 189 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 168 15 59 28 3 10 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 109 10 38 191 17 67 188 17 66 ++188 17 66 188 17 66 190 17 67 163 15 57 21 2 7 0 0 0 ++26 2 9 168 15 59 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 180 16 63 47 4 16 ++0 0 0 0 0 0 0 0 0 0 0 0 108 10 38 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 78 7 27 0 0 0 68 6 24 187 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 183 17 64 56 5 19 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 0 1 131 12 46 191 17 67 188 17 66 ++188 17 66 188 17 66 190 17 67 151 14 53 12 1 4 0 0 0 ++11 1 4 146 13 51 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 126 14 44 7 1 2 ++0 0 0 0 0 0 0 0 0 0 0 0 32 3 11 164 15 58 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 178 16 62 44 4 15 0 0 0 50 5 17 182 16 64 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 72 7 25 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 134 12 47 191 17 67 188 17 66 ++188 17 66 188 17 66 191 17 67 131 12 46 3 0 1 0 0 0 ++0 0 0 101 9 35 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 170 15 60 44 4 15 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 77 7 27 ++183 17 64 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 134 12 47 9 1 3 0 0 0 31 3 11 171 15 60 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 72 7 25 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 2 0 1 124 11 43 191 17 67 188 17 66 ++188 17 66 188 17 66 191 17 67 101 9 35 0 0 0 0 0 0 ++0 0 0 35 3 12 168 15 59 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 182 16 64 77 7 27 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 1 2 ++99 9 35 185 17 65 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++177 16 62 56 5 19 0 0 0 0 0 0 13 1 5 151 14 53 ++190 17 67 188 17 66 188 17 66 188 17 66 185 17 65 56 5 19 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 99 9 35 191 17 67 188 17 66 ++188 17 66 188 17 66 186 17 65 65 6 23 0 0 0 0 0 0 ++0 0 0 0 0 0 79 7 28 182 16 64 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 177 16 62 83 8 29 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++8 1 3 89 8 31 175 16 62 191 17 67 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 181 16 63 ++85 8 30 3 0 1 0 0 0 0 0 0 1 0 0 118 13 41 ++191 17 67 188 17 66 188 17 66 189 17 66 173 16 61 34 3 12 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 56 5 19 183 17 64 188 17 66 ++188 17 66 189 17 66 169 15 59 30 3 10 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 83 8 29 173 16 61 191 17 67 ++190 17 67 189 17 66 189 17 66 190 17 67 191 17 67 187 17 66 ++151 14 53 56 5 19 3 0 1 0 0 0 16 1 6 50 5 17 ++79 7 28 95 9 33 95 9 33 75 7 26 41 4 14 10 1 4 ++0 0 0 2 0 1 50 5 17 132 12 46 178 16 62 190 17 67 ++191 17 67 191 17 67 191 17 67 186 17 65 154 14 54 68 6 24 ++4 0 1 0 0 0 0 0 0 0 0 0 0 0 0 72 7 25 ++187 17 66 188 17 66 188 17 66 191 17 67 141 13 49 9 1 3 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 14 1 5 151 14 53 190 17 67 ++188 17 66 191 17 67 131 12 46 5 0 2 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 2 0 1 44 4 15 113 10 40 ++156 14 55 173 16 61 174 16 61 164 15 58 134 12 47 77 7 27 ++18 2 6 0 0 0 16 1 6 85 8 30 151 14 53 182 16 64 ++189 17 66 191 17 67 190 17 67 188 17 66 177 16 62 141 13 49 ++68 6 24 8 1 3 0 0 0 8 1 3 44 4 15 88 8 31 ++113 10 40 122 11 43 108 10 38 67 6 24 20 2 7 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 28 3 10 ++166 15 58 190 17 67 188 17 66 187 17 66 79 7 28 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 73 7 26 185 17 65 ++189 17 66 184 17 65 65 6 23 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 ++17 2 6 32 3 11 34 3 12 22 2 8 6 1 2 0 0 0 ++0 0 0 38 3 13 141 13 49 188 17 66 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 191 17 67 ++184 17 65 122 11 43 21 2 7 0 0 0 0 0 0 0 0 0 ++0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++108 10 38 191 17 67 191 17 67 141 13 49 16 1 6 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 8 1 3 112 10 39 ++186 17 65 124 11 43 10 1 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++36 3 13 156 14 55 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 190 17 67 134 12 47 18 2 6 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 7 1 2 41 4 14 75 7 26 66 5 23 19 2 7 ++26 2 9 144 13 50 154 14 54 40 4 14 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 1 5 ++56 5 19 19 2 7 0 0 0 7 1 2 29 3 10 35 3 12 ++19 2 7 2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 1 5 ++134 12 47 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 67 108 10 38 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++40 4 14 124 11 43 177 16 62 188 17 66 187 17 66 144 13 50 ++24 2 8 17 2 6 22 2 8 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 19 2 7 122 11 43 171 15 60 175 16 62 ++159 14 56 112 10 39 40 4 14 2 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 7 25 ++186 17 65 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 174 16 61 41 4 14 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 72 7 25 ++168 15 59 191 17 67 189 17 66 188 17 66 188 17 66 190 17 67 ++95 9 33 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 95 9 33 191 17 67 189 17 66 189 17 66 ++190 17 67 191 17 67 171 15 60 90 8 32 12 1 4 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 132 12 46 ++191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 98 9 34 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 88 8 31 180 16 63 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 ++146 13 51 11 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 9 1 3 144 13 50 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 187 17 66 123 11 43 20 2 7 ++0 0 0 0 0 0 0 0 0 0 0 0 21 2 7 163 15 57 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 134 12 47 5 0 2 ++0 0 0 0 0 0 3 0 1 88 8 31 182 16 64 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++171 15 60 31 3 11 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 20 2 7 162 15 57 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 132 12 46 ++20 2 7 0 0 0 0 0 0 0 0 0 32 3 11 173 16 61 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 151 14 53 12 1 4 ++0 0 0 0 0 0 72 7 25 180 16 63 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++181 16 63 47 4 16 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 21 2 7 163 15 57 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++122 11 43 9 1 3 0 0 0 0 0 0 30 3 10 171 15 60 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 146 13 51 10 1 4 ++0 0 0 38 3 13 166 15 58 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++183 17 64 52 5 18 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 13 1 5 154 14 54 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++186 17 65 79 7 28 0 0 0 0 0 0 14 1 5 156 14 54 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 124 11 43 2 0 1 ++5 0 2 122 11 43 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++182 16 64 47 4 16 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 3 0 1 126 14 44 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 158 14 55 23 2 8 0 0 0 1 0 0 113 10 40 ++191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 78 7 27 0 0 0 ++47 4 16 177 16 62 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++173 16 61 34 3 12 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 85 8 30 189 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 79 7 28 0 0 0 0 0 0 47 4 16 ++175 16 62 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 156 14 55 22 2 8 0 0 0 ++109 10 38 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++151 14 53 13 1 5 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 35 3 12 173 16 61 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 134 12 47 7 1 2 0 0 0 3 0 1 ++99 9 35 188 17 66 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 181 16 63 68 6 24 0 0 0 18 2 6 ++156 14 55 190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++101 9 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 0 1 118 13 41 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 168 15 59 28 3 10 0 0 0 0 0 0 ++12 1 4 113 10 40 187 17 66 189 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 180 16 63 88 8 31 4 0 1 0 0 0 47 4 16 ++180 16 63 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 168 15 59 ++36 3 13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 38 3 13 164 15 58 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 182 16 64 50 5 17 0 0 0 0 0 0 ++0 0 0 11 1 4 90 8 32 169 15 59 190 17 67 190 17 67 ++189 17 66 189 17 66 189 17 66 189 17 66 191 17 67 189 17 66 ++158 14 55 68 6 24 4 0 1 0 0 0 0 0 0 73 7 26 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 185 17 65 83 8 29 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 65 6 23 174 16 61 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 185 17 65 56 5 19 0 0 0 0 0 0 ++0 0 0 0 0 0 2 0 1 35 3 12 99 9 35 146 13 51 ++170 15 60 177 16 62 177 16 62 166 15 58 141 13 49 85 8 30 ++24 2 8 0 0 0 0 0 0 0 0 0 0 0 0 85 8 30 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 112 10 39 8 1 3 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 68 6 24 ++170 15 60 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 182 16 64 50 5 17 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 11 1 4 ++28 3 10 40 4 14 38 3 13 25 2 9 8 1 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 78 7 27 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 187 17 66 113 10 40 14 1 5 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++47 4 16 141 13 49 186 17 65 191 17 67 190 17 67 189 17 66 ++189 17 66 191 17 67 156 14 55 20 2 7 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 44 4 15 ++178 16 62 190 17 67 188 17 66 188 17 66 188 17 66 190 17 67 ++191 17 67 173 16 61 90 8 32 10 1 4 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 14 1 5 68 6 24 131 12 46 162 15 57 174 16 61 ++171 15 60 146 13 51 56 5 19 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 3 0 1 14 1 5 29 3 10 ++41 4 14 47 4 16 50 5 17 45 4 16 34 3 12 18 2 6 ++5 0 2 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++90 8 32 169 15 59 185 17 65 187 17 66 182 16 64 163 15 57 ++113 10 40 41 4 14 2 0 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 21 2 7 34 3 12 ++29 3 10 11 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++3 0 1 32 3 11 79 7 28 124 11 43 154 14 54 171 15 60 ++180 16 63 182 16 64 182 16 64 180 16 63 174 16 61 159 14 56 ++132 12 46 88 8 31 34 3 12 3 0 1 0 0 0 0 0 0 ++3 0 1 29 3 10 56 5 19 65 6 23 50 5 17 23 2 8 ++3 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 25 2 9 ++109 10 38 169 15 59 189 17 66 191 17 67 190 17 67 189 17 66 ++189 17 66 188 17 66 188 17 66 188 17 66 189 17 66 190 17 67 ++191 17 67 190 17 67 171 15 60 98 9 34 10 1 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 14 1 5 141 13 49 ++191 17 67 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 67 186 17 65 65 6 23 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 23 2 8 166 15 58 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 176 16 62 45 4 16 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 83 8 29 ++183 17 64 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 185 17 65 95 9 33 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++85 8 30 176 16 62 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 180 16 63 95 9 33 7 1 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++2 0 1 52 5 18 141 13 49 185 17 65 191 17 67 189 17 67 ++189 17 66 188 17 66 188 17 66 189 17 66 191 17 67 187 17 66 ++146 13 51 56 5 19 4 0 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 14 1 5 68 6 24 131 12 46 166 15 58 ++180 16 63 183 17 64 180 16 63 168 15 59 134 12 47 75 7 26 ++17 2 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 24 2 8 ++44 4 15 52 5 18 45 4 16 26 2 9 6 1 2 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 +diff -urN upstream-3.2.21/drivers/video/Makefile bootc-3.2.21/drivers/video/Makefile +--- upstream-3.2.21/drivers/video/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/video/Makefile 2012-06-23 23:52:35.000000000 +0000 +@@ -96,6 +96,7 @@ + obj-$(CONFIG_FB_PVR2) += pvr2fb.o + obj-$(CONFIG_FB_VOODOO1) += sstfb.o + obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o ++obj-$(CONFIG_FB_BCM2708) += bcm2708_fb.o + obj-$(CONFIG_FB_68328) += 68328fb.o + obj-$(CONFIG_FB_GBE) += gbefb.o + obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o +diff -urN upstream-3.2.21/drivers/watchdog/bcm2708_wdog.c bootc-3.2.21/drivers/watchdog/bcm2708_wdog.c +--- upstream-3.2.21/drivers/watchdog/bcm2708_wdog.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/drivers/watchdog/bcm2708_wdog.c 2012-06-23 23:52:38.000000000 +0000 +@@ -0,0 +1,385 @@ ++/* ++ * Broadcom BCM2708 watchdog driver. ++ * ++ * (c) Copyright 2010 Broadcom Europe Ltd ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * BCM2708 watchdog driver. Loosely based on wdt driver. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define SECS_TO_WDOG_TICKS(x) ((x) << 16) ++#define WDOG_TICKS_TO_SECS(x) ((x) >> 16) ++ ++static unsigned long wdog_is_open; ++static uint32_t wdog_ticks; /* Ticks to load into wdog timer */ ++static char expect_close; ++ ++/* ++ * Module parameters ++ */ ++ ++#define WD_TIMO 10 /* Default heartbeat = 60 seconds */ ++static int heartbeat = WD_TIMO; /* Heartbeat in seconds */ ++ ++module_param(heartbeat, int, 0); ++MODULE_PARM_DESC(heartbeat, ++ "Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default=" ++ __MODULE_STRING(WD_TIMO) ")"); ++ ++static int nowayout = WATCHDOG_NOWAYOUT; ++module_param(nowayout, int, 0); ++MODULE_PARM_DESC(nowayout, ++ "Watchdog cannot be stopped once started (default=" ++ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); ++ ++static DEFINE_SPINLOCK(wdog_lock); ++ ++/** ++ * Start the watchdog driver. ++ */ ++ ++static int wdog_start(unsigned long timeout) ++{ ++ uint32_t cur; ++ unsigned long flags; ++ spin_lock_irqsave(&wdog_lock, flags); ++ ++ /* enable the watchdog */ ++ iowrite32(PM_PASSWORD | (timeout & PM_WDOG_TIME_SET), ++ __io_address(PM_WDOG)); ++ cur = ioread32(__io_address(PM_RSTC)); ++ iowrite32(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) | ++ PM_RSTC_WRCFG_FULL_RESET, __io_address(PM_RSTC)); ++ ++ spin_unlock_irqrestore(&wdog_lock, flags); ++ return 0; ++} ++ ++/** ++ * Stop the watchdog driver. ++ */ ++ ++static int wdog_stop(void) ++{ ++ iowrite32(PM_PASSWORD | PM_RSTC_RESET, __io_address(PM_RSTC)); ++ printk(KERN_INFO "watchdog stopped\n"); ++ return 0; ++} ++ ++/** ++ * Reload counter one with the watchdog heartbeat. We don't bother ++ * reloading the cascade counter. ++ */ ++ ++static void wdog_ping(void) ++{ ++ wdog_start(wdog_ticks); ++} ++ ++/** ++ * @t: the new heartbeat value that needs to be set. ++ * ++ * Set a new heartbeat value for the watchdog device. If the heartbeat ++ * value is incorrect we keep the old value and return -EINVAL. If ++ * successful we return 0. ++ */ ++ ++static int wdog_set_heartbeat(int t) ++{ ++ if (t < 1 || t > WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET)) ++ return -EINVAL; ++ ++ heartbeat = t; ++ wdog_ticks = SECS_TO_WDOG_TICKS(t); ++ return 0; ++} ++ ++/** ++ * @file: file handle to the watchdog ++ * @buf: buffer to write (unused as data does not matter here ++ * @count: count of bytes ++ * @ppos: pointer to the position to write. No seeks allowed ++ * ++ * A write to a watchdog device is defined as a keepalive signal. ++ * ++ * if 'nowayout' is set then normally a close() is ignored. But ++ * if you write 'V' first then the close() will stop the timer. ++ */ ++ ++static ssize_t wdog_write(struct file *file, const char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ if (count) { ++ if (!nowayout) { ++ size_t i; ++ ++ /* In case it was set long ago */ ++ expect_close = 0; ++ ++ for (i = 0; i != count; i++) { ++ char c; ++ if (get_user(c, buf + i)) ++ return -EFAULT; ++ if (c == 'V') ++ expect_close = 42; ++ } ++ } ++ wdog_ping(); ++ } ++ return count; ++} ++ ++static int wdog_get_status(void) ++{ ++ unsigned long flags; ++ int status = 0; ++ spin_lock_irqsave(&wdog_lock, flags); ++ /* FIXME: readback reset reason */ ++ spin_unlock_irqrestore(&wdog_lock, flags); ++ return status; ++} ++ ++static uint32_t wdog_get_remaining(void) ++{ ++ uint32_t ret = ioread32(__io_address(PM_WDOG)); ++ return ret & PM_WDOG_TIME_SET; ++} ++ ++/** ++ * @file: file handle to the device ++ * @cmd: watchdog command ++ * @arg: argument pointer ++ * ++ * The watchdog API defines a common set of functions for all watchdogs ++ * according to their available features. We only actually usefully support ++ * querying capabilities and current status. ++ */ ++ ++static long wdog_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ void __user *argp = (void __user *)arg; ++ int __user *p = argp; ++ int new_heartbeat; ++ int status; ++ int options; ++ uint32_t remaining; ++ ++ struct watchdog_info ident = { ++ .options = WDIOF_SETTIMEOUT| ++ WDIOF_MAGICCLOSE| ++ WDIOF_KEEPALIVEPING, ++ .firmware_version = 1, ++ .identity = "BCM2708", ++ }; ++ ++ switch (cmd) { ++ case WDIOC_GETSUPPORT: ++ return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; ++ case WDIOC_GETSTATUS: ++ status = wdog_get_status(); ++ return put_user(status, p); ++ case WDIOC_GETBOOTSTATUS: ++ return put_user(0, p); ++ case WDIOC_KEEPALIVE: ++ wdog_ping(); ++ return 0; ++ case WDIOC_SETTIMEOUT: ++ if (get_user(new_heartbeat, p)) ++ return -EFAULT; ++ if (wdog_set_heartbeat(new_heartbeat)) ++ return -EINVAL; ++ wdog_ping(); ++ /* Fall */ ++ case WDIOC_GETTIMEOUT: ++ return put_user(heartbeat, p); ++ case WDIOC_GETTIMELEFT: ++ remaining = WDOG_TICKS_TO_SECS(wdog_get_remaining()); ++ return put_user(remaining, p); ++ case WDIOC_SETOPTIONS: ++ if (get_user(options, p)) ++ return -EFAULT; ++ if (options & WDIOS_DISABLECARD) ++ wdog_stop(); ++ if (options & WDIOS_ENABLECARD) ++ wdog_start(wdog_ticks); ++ return 0; ++ default: ++ return -ENOTTY; ++ } ++} ++ ++/** ++ * @inode: inode of device ++ * @file: file handle to device ++ * ++ * The watchdog device has been opened. The watchdog device is single ++ * open and on opening we load the counters. ++ */ ++ ++static int wdog_open(struct inode *inode, struct file *file) ++{ ++ if (test_and_set_bit(0, &wdog_is_open)) ++ return -EBUSY; ++ /* ++ * Activate ++ */ ++ wdog_start(wdog_ticks); ++ return nonseekable_open(inode, file); ++} ++ ++/** ++ * @inode: inode to board ++ * @file: file handle to board ++ * ++ * The watchdog has a configurable API. There is a religious dispute ++ * between people who want their watchdog to be able to shut down and ++ * those who want to be sure if the watchdog manager dies the machine ++ * reboots. In the former case we disable the counters, in the latter ++ * case you have to open it again very soon. ++ */ ++ ++static int wdog_release(struct inode *inode, struct file *file) ++{ ++ if (expect_close == 42) { ++ wdog_stop(); ++ } else { ++ printk(KERN_CRIT ++ "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); ++ wdog_ping(); ++ } ++ clear_bit(0, &wdog_is_open); ++ expect_close = 0; ++ return 0; ++} ++ ++/** ++ * @this: our notifier block ++ * @code: the event being reported ++ * @unused: unused ++ * ++ * Our notifier is called on system shutdowns. Turn the watchdog ++ * off so that it does not fire during the next reboot. ++ */ ++ ++static int wdog_notify_sys(struct notifier_block *this, unsigned long code, ++ void *unused) ++{ ++ if (code == SYS_DOWN || code == SYS_HALT) ++ wdog_stop(); ++ return NOTIFY_DONE; ++} ++ ++/* ++ * Kernel Interfaces ++ */ ++ ++ ++static const struct file_operations wdog_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .write = wdog_write, ++ .unlocked_ioctl = wdog_ioctl, ++ .open = wdog_open, ++ .release = wdog_release, ++}; ++ ++static struct miscdevice wdog_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &wdog_fops, ++}; ++ ++/* ++ * The WDT card needs to learn about soft shutdowns in order to ++ * turn the timebomb registers off. ++ */ ++ ++static struct notifier_block wdog_notifier = { ++ .notifier_call = wdog_notify_sys, ++}; ++ ++/** ++ * cleanup_module: ++ * ++ * Unload the watchdog. You cannot do this with any file handles open. ++ * If your watchdog is set to continue ticking on close and you unload ++ * it, well it keeps ticking. We won't get the interrupt but the board ++ * will not touch PC memory so all is fine. You just have to load a new ++ * module in 60 seconds or reboot. ++ */ ++ ++static void __exit wdog_exit(void) ++{ ++ misc_deregister(&wdog_miscdev); ++ unregister_reboot_notifier(&wdog_notifier); ++} ++ ++static int __init wdog_init(void) ++{ ++ int ret; ++ ++ /* Check that the heartbeat value is within it's range; ++ if not reset to the default */ ++ if (wdog_set_heartbeat(heartbeat)) { ++ wdog_set_heartbeat(WD_TIMO); ++ printk(KERN_INFO "bcm2708_wdog: heartbeat value must be " ++ "0 < heartbeat < %d, using %d\n", ++ WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), ++ WD_TIMO); ++ } ++ ++ ret = register_reboot_notifier(&wdog_notifier); ++ if (ret) { ++ printk(KERN_ERR ++ "wdt: cannot register reboot notifier (err=%d)\n", ret); ++ goto out_reboot; ++ } ++ ++ ret = misc_register(&wdog_miscdev); ++ if (ret) { ++ printk(KERN_ERR ++ "wdt: cannot register miscdev on minor=%d (err=%d)\n", ++ WATCHDOG_MINOR, ret); ++ goto out_misc; ++ } ++ ++ printk(KERN_INFO "bcm2708 watchdog, heartbeat=%d sec (nowayout=%d)\n", ++ heartbeat, nowayout); ++ return 0; ++ ++out_misc: ++ unregister_reboot_notifier(&wdog_notifier); ++out_reboot: ++ return ret; ++} ++ ++module_init(wdog_init); ++module_exit(wdog_exit); ++ ++MODULE_AUTHOR("Luke Diamand"); ++MODULE_DESCRIPTION("Driver for BCM2708 watchdog"); ++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); ++MODULE_ALIAS_MISCDEV(TEMP_MINOR); ++MODULE_LICENSE("GPL"); ++ +diff -urN upstream-3.2.21/drivers/watchdog/Kconfig bootc-3.2.21/drivers/watchdog/Kconfig +--- upstream-3.2.21/drivers/watchdog/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/watchdog/Kconfig 2012-06-23 23:52:37.000000000 +0000 +@@ -343,6 +343,12 @@ + To compile this driver as a module, choose M here: the + module will be called imx2_wdt. + ++config BCM2708_WDT ++ tristate "BCM2708 Watchdog" ++ depends on ARCH_BCM2708 ++ help ++ Enables BCM2708 watchdog support. ++ + # AVR32 Architecture + + config AT32AP700X_WDT +diff -urN upstream-3.2.21/drivers/watchdog/Makefile bootc-3.2.21/drivers/watchdog/Makefile +--- upstream-3.2.21/drivers/watchdog/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/drivers/watchdog/Makefile 2012-06-23 23:52:37.000000000 +0000 +@@ -53,6 +53,7 @@ + obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o + obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o + obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o ++obj-$(CONFIG_BCM2708_WDT) += bcm2708_wdog.o + + # AVR32 Architecture + obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o +diff -urN upstream-3.2.21/include/linux/mmc/sdhci.h bootc-3.2.21/include/linux/mmc/sdhci.h +--- upstream-3.2.21/include/linux/mmc/sdhci.h 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/include/linux/mmc/sdhci.h 2012-06-23 23:52:47.000000000 +0000 +@@ -121,6 +121,7 @@ + #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ + #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ + #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ ++#define SDHCI_USE_PLATDMA (1<<10) /* Host uses 3rd party DMA */ + + unsigned int version; /* SDHCI spec. version */ + +@@ -135,6 +136,7 @@ + + struct mmc_request *mrq; /* Current request */ + struct mmc_command *cmd; /* Current command */ ++ int last_cmdop; /* Opcode of last cmd sent */ + struct mmc_data *data; /* Current data request */ + unsigned int data_early:1; /* Data finished before cmd */ + +diff -urN upstream-3.2.21/sound/arm/bcm2835.c bootc-3.2.21/sound/arm/bcm2835.c +--- upstream-3.2.21/sound/arm/bcm2835.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/sound/arm/bcm2835.c 2012-06-23 23:52:59.000000000 +0000 +@@ -0,0 +1,424 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++ ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* module parameters (see "Module Parameters") */ ++/* SNDRV_CARDS: maximum number of cards supported by this module */ ++static int index[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = -1 }; ++static char *id[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = NULL }; ++static int enable[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = 1 }; ++ ++/* HACKY global pointers needed for successive probes to work : ssp ++ * But compared against the changes we will have to do in VC audio_ipc code ++ * to export 8 audio_ipc devices as a single IPC device and then monitor all ++ * four devices in a thread, this gets things done quickly and should be easier ++ * to debug if we run into issues ++ */ ++ ++static struct snd_card *g_card = NULL; ++static bcm2835_chip_t *g_chip = NULL; ++ ++static int snd_bcm2835_free(bcm2835_chip_t * chip) ++{ ++ kfree(chip); ++ return 0; ++} ++ ++/* component-destructor ++ * (see "Management of Cards and Components") ++ */ ++static int snd_bcm2835_dev_free(struct snd_device *device) ++{ ++ return snd_bcm2835_free(device->device_data); ++} ++ ++/* chip-specific constructor ++ * (see "Management of Cards and Components") ++ */ ++static int __devinit snd_bcm2835_create(struct snd_card *card, ++ struct platform_device *pdev, ++ bcm2835_chip_t ** rchip) ++{ ++ bcm2835_chip_t *chip; ++ int err; ++ static struct snd_device_ops ops = { ++ .dev_free = snd_bcm2835_dev_free, ++ }; ++ ++ *rchip = NULL; ++ ++ chip = kzalloc(sizeof(*chip), GFP_KERNEL); ++ if (chip == NULL) ++ return -ENOMEM; ++ ++ chip->card = card; ++ ++ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); ++ if (err < 0) { ++ snd_bcm2835_free(chip); ++ return err; ++ } ++ ++ *rchip = chip; ++ return 0; ++} ++ ++static int __devinit snd_bcm2835_alsa_probe(struct platform_device *pdev) ++{ ++ static int dev; ++ bcm2835_chip_t *chip; ++ struct snd_card *card; ++ int err; ++ printk(KERN_INFO "### snd_bcm2835_alsa_probe %p ###", pdev); ++ ++ printk ++ ("############ PROBING FOR bcm2835 ALSA device (%d):(%d) ###############\n", ++ dev, enable[dev]); ++ ++ if (dev >= MAX_SUBSTREAMS) ++ return -ENODEV; ++ ++ if (!enable[dev]) { ++ dev++; ++ return -ENOENT; ++ } ++ ++ if (dev > 0) ++ goto add_register_map; ++ ++ printk("Creating card...\n"); ++ err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &g_card); ++ if (err < 0) ++ goto out; ++ ++ snd_card_set_dev(g_card, &pdev->dev); ++ strcpy(g_card->driver, "BRCM bcm2835 ALSA Driver"); ++ strcpy(g_card->shortname, "bcm2835 ALSA"); ++ sprintf(g_card->longname, "%s", g_card->shortname); ++ ++ printk("Creating device/chip ..\n"); ++ err = snd_bcm2835_create(g_card, pdev, &chip); ++ if (err < 0) { ++ printk(KERN_ERR "Failed to create bcm2835 chip\n"); ++ goto out_bcm2835_create; ++ } ++ ++ g_chip = chip; ++ err = snd_bcm2835_new_pcm(chip); ++ if (err < 0) { ++ printk(KERN_ERR "Failed to create new BCM2835 pcm device\n"); ++ goto out_bcm2835_new_pcm; ++ } ++ ++ printk("Adding controls ..\n"); ++ err = snd_bcm2835_new_ctl(chip); ++ if (err < 0) { ++ printk(KERN_ERR "Failed to create new BCM2835 ctl\n"); ++ goto out_bcm2835_new_ctl; ++ } ++ ++add_register_map: ++ card = g_card; ++ chip = g_chip; ++ ++ BUG_ON(!(card && chip)); ++ ++ chip->avail_substreams |= (1 << dev); ++ chip->pdev[dev] = pdev; ++ ++ if (dev == 0) { ++ printk("Registering card ....\n"); ++ err = snd_card_register(card); ++ if (err < 0) { ++ printk(KERN_ERR ++ "Failed to register bcm2835 ALSA card \n"); ++ goto out_card_register; ++ } ++ platform_set_drvdata(pdev, card); ++ printk("bcm2835 ALSA CARD CREATED!\n"); ++ } else { ++ printk("bcm2835 ALSA CHIP CREATED!\n"); ++ platform_set_drvdata(pdev, (void *)dev); ++ } ++ ++ dev++; ++ ++ return 0; ++ ++out_card_register: ++out_bcm2835_new_ctl: ++out_bcm2835_new_pcm: ++out_bcm2835_create: ++ BUG_ON(!g_card); ++ if (snd_card_free(g_card)) ++ printk(KERN_ERR "Failed to free Registered alsa card\n"); ++ g_card = NULL; ++out: ++ dev = SNDRV_CARDS; /* stop more avail_substreams from being probed */ ++ printk(KERN_ERR "BCM2835 ALSA Probe failed !!\n"); ++ return err; ++} ++ ++static int snd_bcm2835_alsa_remove(struct platform_device *pdev) ++{ ++ uint32_t idx; ++ void *drv_data; ++ ++ drv_data = platform_get_drvdata(pdev); ++ ++ if (drv_data == (void *)g_card) { ++ /* This is the card device */ ++ snd_card_free((struct snd_card *)drv_data); ++ g_card = NULL; ++ g_chip = NULL; ++ } else { ++ idx = (uint32_t) drv_data; ++ if (g_card != NULL) { ++ BUG_ON(!g_chip); ++ /* We pass chip device numbers in audio ipc devices ++ * other than the one we registered our card with ++ */ ++ idx = (uint32_t) drv_data; ++ BUG_ON(!idx || idx > MAX_SUBSTREAMS); ++ g_chip->avail_substreams &= ~(1 << idx); ++ /* There should be atleast one substream registered ++ * after we are done here, as it wil be removed when ++ * the *remove* is called for the card device ++ */ ++ BUG_ON(!g_chip->avail_substreams); ++ } ++ } ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int snd_bcm2835_alsa_suspend(struct platform_device *pdev, ++ pm_message_t state) ++{ ++ return 0; ++} ++ ++static int snd_bcm2835_alsa_resume(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++#endif ++ ++static struct platform_driver bcm2835_alsa0_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD0", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa1_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD1", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa2_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD2", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa3_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD3", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa4_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD4", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa5_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD5", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa6_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD6", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa7_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD7", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __devinit bcm2835_alsa_device_init(void) ++{ ++ int err; ++ err = platform_driver_register(&bcm2835_alsa0_driver); ++ if (err) { ++ printk("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto out; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa1_driver); ++ if (err) { ++ printk("Error registering bcm2835_alsa1_driver %d .\n", err); ++ goto unregister_0; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa2_driver); ++ if (err) { ++ printk("Error registering bcm2835_alsa2_driver %d .\n", err); ++ goto unregister_1; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa3_driver); ++ if (err) { ++ printk("Error registering bcm2835_alsa3_driver %d .\n", err); ++ goto unregister_2; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa4_driver); ++ if (err) { ++ printk("Error registering bcm2835_alsa4_driver %d .\n", err); ++ goto unregister_3; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa5_driver); ++ if (err) { ++ printk("Error registering bcm2835_alsa5_driver %d .\n", err); ++ goto unregister_4; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa6_driver); ++ if (err) { ++ printk("Error registering bcm2835_alsa6_driver %d .\n", err); ++ goto unregister_5; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa7_driver); ++ if (err) { ++ printk("Error registering bcm2835_alsa7_driver %d .\n", err); ++ goto unregister_6; ++ } ++ printk(KERN_INFO "### BCM2835 ALSA driver init %s ### \n", ++ err ? "FAILED" : "OK"); ++ ++ return 0; ++ ++unregister_6: ++ platform_driver_unregister(&bcm2835_alsa6_driver); ++unregister_5: ++ platform_driver_unregister(&bcm2835_alsa5_driver); ++unregister_4: ++ platform_driver_unregister(&bcm2835_alsa4_driver); ++unregister_3: ++ platform_driver_unregister(&bcm2835_alsa3_driver); ++unregister_2: ++ platform_driver_unregister(&bcm2835_alsa2_driver); ++unregister_1: ++ platform_driver_unregister(&bcm2835_alsa1_driver); ++unregister_0: ++ platform_driver_unregister(&bcm2835_alsa0_driver); ++out: ++ return err; ++} ++ ++static void __devexit bcm2835_alsa_device_exit(void) ++{ ++ platform_driver_unregister(&bcm2835_alsa0_driver); ++ platform_driver_unregister(&bcm2835_alsa1_driver); ++ platform_driver_unregister(&bcm2835_alsa2_driver); ++ platform_driver_unregister(&bcm2835_alsa3_driver); ++ platform_driver_unregister(&bcm2835_alsa4_driver); ++ platform_driver_unregister(&bcm2835_alsa5_driver); ++ platform_driver_unregister(&bcm2835_alsa6_driver); ++ platform_driver_unregister(&bcm2835_alsa7_driver); ++} ++ ++late_initcall(bcm2835_alsa_device_init); ++module_exit(bcm2835_alsa_device_exit); ++ ++MODULE_AUTHOR("Dom Cobley"); ++MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:bcm2835_alsa"); +diff -urN upstream-3.2.21/sound/arm/bcm2835-ctl.c bootc-3.2.21/sound/arm/bcm2835-ctl.c +--- upstream-3.2.21/sound/arm/bcm2835-ctl.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/sound/arm/bcm2835-ctl.c 2012-06-23 23:52:59.000000000 +0000 +@@ -0,0 +1,172 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = -10240; ++ uinfo->value.integer.max = 2303; ++ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = AUDIO_DEST_MAX-0; ++ } ++ ++ return 0; ++} ++ ++static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ ++ BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); ++ ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) ++ ucontrol->value.integer.value[0] = chip->volume; ++ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) ++ ucontrol->value.integer.value[0] = chip->mute; ++ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) ++ ucontrol->value.integer.value[0] = chip->dest; ++ ++ return 0; ++} ++ ++static int snd_bcm2835_ctl_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ int changed = 0; ++ ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { ++ if (chip->mute) { ++ chip->mute = 0; ++ changed = 1; ++ } ++ if (changed ++ || (ucontrol->value.integer.value[0] != chip->volume)) { ++ int atten; ++ ++ chip->volume = ucontrol->value.integer.value[0]; ++ changed = 1; ++ atten = -((chip->volume << 8) / 100); ++ chip->volume = atten; ++ } ++ ++ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { ++ /* Not implemented */ ++ if (ucontrol->value.integer.value[0] != chip->mute) { ++ chip->mute = ucontrol->value.integer.value[0]; ++ changed = 0; ++ } ++ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { ++ if (ucontrol->value.integer.value[0] != chip->dest) { ++ chip->dest = ucontrol->value.integer.value[0]; ++ changed = 1; ++ } ++ } ++ ++ if (changed) { ++ if (bcm2835_audio_set_ctls(chip)) ++ printk(KERN_ERR "Failed to set ALSA controls..\n"); ++ } ++ ++ return changed; ++} ++ ++static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, -10240, 1, 1); ++ ++static struct snd_kcontrol_new snd_bcm2835_ctl[] __devinitdata = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Volume", ++ .index = 0, ++ .access = ++ SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE, ++ .private_value = PCM_PLAYBACK_VOLUME, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ .tlv = {.p = snd_bcm2835_db_scale} ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Switch", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, ++ .private_value = PCM_PLAYBACK_MUTE, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Route", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, ++ .private_value = PCM_PLAYBACK_DEVICE, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ }, ++}; ++ ++int __devinit snd_bcm2835_new_ctl(bcm2835_chip_t * chip) ++{ ++ int err; ++ unsigned int idx; ++ ++ strcpy(chip->card->mixername, "Broadcom Mixer"); ++ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) { ++ err = ++ snd_ctl_add(chip->card, ++ snd_ctl_new1(&snd_bcm2835_ctl[idx], chip)); ++ if (err < 0) ++ return err; ++ } ++ return 0; ++} +diff -urN upstream-3.2.21/sound/arm/bcm2835.h bootc-3.2.21/sound/arm/bcm2835.h +--- upstream-3.2.21/sound/arm/bcm2835.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/sound/arm/bcm2835.h 2012-06-23 23:52:59.000000000 +0000 +@@ -0,0 +1,242 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __SOUND_ARM_BCM2835_H ++#define __SOUND_ARM_BCM2835_H ++ ++#define SUBSTREAM_NUM 1 ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* #define DUMP_RAW_DATA */ ++//#define AUDIO_DEBUG_ENABLE ++//#define AUDIO_VERBOSE_DEBUG_ENABLE ++ ++/* Debug macros */ ++#ifdef AUDIO_DEBUG_ENABLE ++ ++#ifdef AUDIO_VERBOSE_DEBUG_ENABLE ++ ++#define audio_debug(fmt, arg...) \ ++ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_info(fmt, arg...) \ ++ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#else ++ ++#define audio_debug(fmt, arg...) do {} while (0) ++ ++#define audio_info(fmt, arg...) do {} while (0) ++ ++#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */ ++ ++#else ++ ++#define audio_debug(fmt, arg...) do {} while (0) ++ ++#define audio_info(fmt, arg...) do {} while (0) ++ ++#endif /* AUDIO_DEBUG_ENABLE */ ++ ++#define audio_error(fmt, arg...) \ ++ printk(KERN_ERR"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_warning(fmt, arg...) \ ++ printk(KERN_WARNING"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_alert(fmt, arg...) \ ++ printk(KERN_ALERT"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define MAX_SUBSTREAMS (8) ++#define AVAIL_SUBSTREAMS_MASK (0xff) ++ ++#define AUDIO_IPC_BLOCK_NUM_BUFFERS (8) ++#define AUDIO_IPC_BLOCK_BUFFER_SIZE (1024*8) ++ ++#define AUDIO_CONTROL_OFFSET (0x00) ++#define CTRL_EN_SHIFT (0) ++#define CTRL_EN_MASK (0x00000001) ++#define CTRL_PLAY_SHIFT (1) ++#define CTRL_PLAY_MASK (0x00000002) ++#define CTRL_MUTE_SHIFT (2) ++#define CTRL_MUTE_MASK (0x00000004) ++#define CTRL_SETUP_SHIFT (3) ++#define CTRL_SETUP_MASK (0x00000008) ++#define CTRL_FLUSH_SHIFT (4) ++#define CTRL_FLUSH_MASK (0x00000010) ++#define CTRL_STOPMODE_SHIFT (5) ++#define CTRL_STOPMODE_MASK (0x00000020) ++ ++#define AUDIO_STATUS_OFFSET (0x04) ++#define STAT_EN_SHIFT (0) ++#define STAT_EN_MASK (0x00000001) ++#define STAT_PLAY_SHIFT (1) ++#define STAT_PLAY_MASK (0x00000002) ++#define STAT_MUTE_SHIFT (2) ++#define STAT_MUTE_MASK (0x00000004) ++#define STAT_SETUP_SHIFT (3) ++#define STAT_SETUP_MASK (0x00000008) ++#define STAT_FLUSH_SHIFT (4) ++#define STAT_FLUSH_MASK (0x00000010) ++#define STAT_STOPMODE_SHIFT (5) ++#define STAT_STOPMODE_MASK (0x00000020) ++ ++/* Interrupt status */ ++#define AUDIO_INTSTAT_OFFSET (0x08) ++#define INTSTAT_CONTROL_SHIFT (0) ++#define INTSTAT_CONTROL_MASK (0x0000000f) ++#define INTSTAT_FIFO_SHIFT (4) ++#define INTSTAT_FIFO_MASK (0x000000f0) ++ ++/* Configuration */ ++#define AUDIO_DESTINATION_OFFSET (0x0C) ++#define AUDIO_SAMPLE_RATE_OFFSET (0x10) ++#define AUDIO_BIT_RATE_OFFSET (0x14) ++#define AUDIO_VOLUME_OFFSET (0x18) ++#define AUDIO_CHANNELS_OFFSET (0x1C) ++ ++/* Implemention of peterson's algorithm for shared memory semaphores */ ++#define AUDIO_FLAG0_OFFSET (0x20) ++#define AUDIO_FLAG1_OFFSET (0x24) ++#define AUDIO_TURN_OFFSET (0x28) ++ ++/* Fifo registers */ ++#define AUDIO_IN_WRITE_PTR_OFFSET (0x30) ++#define AUDIO_IN_READ_PTR_OFFSET (0x34) ++#define AUDIO_IN_FIFO_SIZE_OFFSET (0x38) ++#define AUDIO_IN_FIFO_ENTRY_OFFSET (0x3C) ++#define AUDIO_IN_FIFO_START_OFFSET (0x40) ++ ++/* 8 entries here of 4 words each = 0x80 gap from 0x50 */ ++#define AUDIO_IN_FIFO_OFFSET (0x50) ++ ++#define AUDIO_OUT_WRITE_PTR_OFFSET (0xD0) ++#define AUDIO_OUT_READ_PTR_OFFSET (0xD4) ++#define AUDIO_OUT_FIFO_SIZE_OFFSET (0xD8) ++#define AUDIO_OUT_FIFO_ENTRY_OFFSET (0xDC) ++#define AUDIO_OUT_FIFO_START_OFFSET (0xE0) ++ ++/* 8 entries here of 4 words each = 0x80 gap from 0xF0 */ ++#define AUDIO_OUT_FIFO_OFFSET (0xF0) ++ ++/* Some constants for values .. */ ++typedef enum { ++ AUDIO_DEST_AUTO = 0, ++ AUDIO_DEST_HEADPHONES = 1, ++ AUDIO_DEST_HDMI = 2, ++ AUDIO_DEST_MAX, ++} SND_BCM2835_ROUTE_T; ++ ++typedef enum { ++ PCM_PLAYBACK_VOLUME, ++ PCM_PLAYBACK_MUTE, ++ PCM_PLAYBACK_DEVICE, ++} SND_BCM2835_CTRL_T; ++ ++/* this struct is tightly packed - its size is 16bytes */ ++typedef struct { ++ uint32_t buffer_id; ++ uint32_t buffer_size; ++ uint32_t buffer_ptr; ++ uint32_t spare; ++ ++} AUDIO_FIFO_ENTRY_T; ++ ++/* definition of the chip-specific record */ ++typedef struct bcm2835_chip { ++ struct snd_card *card; ++ struct snd_pcm *pcm; ++ /* Bitmat for valid reg_base and irq numbers */ ++ uint32_t avail_substreams; ++ struct platform_device *pdev[MAX_SUBSTREAMS]; ++ struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS]; ++ ++ int volume; ++ int dest; ++ int mute; ++} bcm2835_chip_t; ++ ++typedef struct bcm2835_audio_buffer { ++ uint32_t buffer_id; ++ phys_addr_t bus_addr; ++ uint8_t __iomem *start; ++ uint32_t size; ++ uint32_t data_left; ++ struct list_head link; ++ ++} bcm2835_audio_buffer_t; ++ ++typedef struct bcm2835_alsa_stream { ++ bcm2835_chip_t *chip; ++ struct snd_pcm_substream *substream; ++ ++ struct semaphore buffers_update_sem; ++ struct semaphore control_sem; ++ spinlock_t lock; ++ volatile uint32_t control; ++ volatile uint32_t status; ++ ++ int open; ++ int running; ++ int draining; ++ ++#ifdef DUMP_RAW_DATA ++ /* for debug */ ++ int file; ++#endif ++ unsigned int pos; ++ unsigned int buffer_size; ++ unsigned int period_size; ++ ++ uint32_t enable_fifo_irq; ++ irq_handler_t fifo_irq_handler; ++ ++ atomic_t retrieved; ++ struct opaque_AUDIO_INSTANCE_T *instance; ++ struct workqueue_struct *my_wq; ++ int idx; ++} bcm2835_alsa_stream_t; ++ ++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip); ++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip); ++ ++void bcm2835_audio_fifo_get_lock(bcm2835_alsa_stream_t * alsa_stream); ++void bcm2835_audio_fifo_put_lock(bcm2835_alsa_stream_t * alsa_stream); ++ ++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream, ++ uint32_t channels, uint32_t samplerate, ++ uint32_t bps); ++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip); ++int bcm2835_audio_write(bcm2835_alsa_stream_t * alsa_stream, uint32_t count, ++ void *src); ++//uint32_t bcm2835_audio_buffers_consumed_bytes(bcm2835_alsa_stream_t *alsa_stream); ++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream); ++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream); ++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream); ++ ++#endif /* __SOUND_ARM_BCM2835_H */ +diff -urN upstream-3.2.21/sound/arm/bcm2835-pcm.c bootc-3.2.21/sound/arm/bcm2835-pcm.c +--- upstream-3.2.21/sound/arm/bcm2835-pcm.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/sound/arm/bcm2835-pcm.c 2012-06-23 23:52:59.000000000 +0000 +@@ -0,0 +1,400 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* hardware definition */ ++static struct snd_pcm_hardware snd_bcm2835_playback_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER), ++ .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, ++ .rate_min = 8000, ++ .rate_max = 48000, ++ .channels_min = 1, ++ .channels_max = 2, ++ .buffer_bytes_max = (4 * 8 - 1) * 1024, /* Needs to be less than audioplay buffer size */ ++ .period_bytes_min = 1 * 1024, ++ .period_bytes_max = (4 * 8 - 1) * 1024, ++ .periods_min = 1, ++ .periods_max = 4 * 8 - 1, ++}; ++ ++static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime) ++{ ++ audio_info("Freeing up alsa stream here ..\n"); ++ if (runtime->private_data) ++ kfree(runtime->private_data); ++ runtime->private_data = NULL; ++} ++ ++static irqreturn_t bcm2835_playback_fifo_irq(int irq, void *dev_id) ++{ ++ bcm2835_alsa_stream_t *alsa_stream = (bcm2835_alsa_stream_t *) dev_id; ++ uint32_t consumed = 0; ++ int new_period = 0; ++ ++ audio_info(" .. IN\n"); ++ ++ audio_info("alsa_stream=%p substream=%p\n", alsa_stream, ++ alsa_stream ? alsa_stream->substream : 0); ++ ++ if (alsa_stream->open) ++ consumed = bcm2835_audio_retrieve_buffers(alsa_stream); ++ ++ /* We get called only if playback was triggered, So, the number of buffers we retrieve in ++ * each iteration are the buffers that have been played out already ++ */ ++ ++ if (alsa_stream->period_size) { ++ if ((alsa_stream->pos / alsa_stream->period_size) != ++ ((alsa_stream->pos + consumed) / alsa_stream->period_size)) ++ new_period = 1; ++ } ++ audio_debug("updating pos cur: %d + %d max:%d new_period:%d\n", ++ alsa_stream->pos, ++ (consumed /** AUDIO_IPC_BLOCK_BUFFER_SIZE*/ ), ++ alsa_stream->buffer_size, new_period); ++ if (alsa_stream->buffer_size) { ++ alsa_stream->pos += consumed; ++ alsa_stream->pos %= alsa_stream->buffer_size; ++ } ++ if (alsa_stream->substream) { ++ if (new_period) ++ snd_pcm_period_elapsed(alsa_stream->substream); ++ } else { ++ audio_warning(" unexpected NULL substream\n"); ++ } ++ audio_info(" .. OUT\n"); ++ ++ return IRQ_HANDLED; ++} ++ ++/* open callback */ ++static int snd_bcm2835_playback_open(struct snd_pcm_substream *substream) ++{ ++ bcm2835_chip_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int idx; ++ int err; ++ ++ audio_info(" .. IN (%d)\n", substream->number); ++ ++ audio_warning("Alsa open (%d)\n", substream->number); ++ idx = substream->number; ++ ++ if (idx > MAX_SUBSTREAMS) { ++ audio_error ++ ("substream(%d) device doesn't exist max(%d) substreams allowed\n", ++ idx, MAX_SUBSTREAMS); ++ err = -ENODEV; ++ goto out; ++ } ++ ++ /* Check if we are ready */ ++ if (!(chip->avail_substreams & (1 << idx))) { ++ /* We are not ready yet */ ++ audio_error("substream(%d) device is not ready yet\n", idx); ++ err = -EAGAIN; ++ goto out; ++ } ++ ++ alsa_stream = kzalloc(sizeof(bcm2835_alsa_stream_t), GFP_KERNEL); ++ if (alsa_stream == NULL) { ++ return -ENOMEM; ++ } ++ ++ /* Initialise alsa_stream */ ++ alsa_stream->chip = chip; ++ alsa_stream->substream = substream; ++ alsa_stream->idx = idx; ++ chip->alsa_stream[idx] = alsa_stream; ++ ++ sema_init(&alsa_stream->buffers_update_sem, 0); ++ sema_init(&alsa_stream->control_sem, 0); ++ spin_lock_init(&alsa_stream->lock); ++ ++ /* Enabled in start trigger, called on each "fifo irq" after that */ ++ alsa_stream->enable_fifo_irq = 0; ++ alsa_stream->fifo_irq_handler = bcm2835_playback_fifo_irq; ++ ++ runtime->private_data = alsa_stream; ++ runtime->private_free = snd_bcm2835_playback_free; ++ runtime->hw = snd_bcm2835_playback_hw; ++ ++ /* minimum 16 bytes alignment (for vchiq bulk transfers) */ ++ snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, ++ 16); ++ ++ err = bcm2835_audio_open(alsa_stream); ++ if (err != 0) { ++ kfree(alsa_stream); ++ return err; ++ } ++ ++ alsa_stream->open = 1; ++ alsa_stream->draining = 1; ++ ++out: ++ audio_info(" .. OUT =%d\n", err); ++ ++ return err; ++} ++ ++/* close callback */ ++static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream) ++{ ++ /* the hardware-specific codes will be here */ ++ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ ++ audio_info(" .. IN\n"); ++ audio_warning("Alsa close\n"); ++ ++ /* ++ * Call stop if it's still running. This happens when app ++ * is force killed and we don't get a stop trigger. ++ */ ++ if (alsa_stream->running) { ++ int err; ++ err = bcm2835_audio_stop(alsa_stream); ++ alsa_stream->running = 0; ++ if (err != 0) ++ audio_error(" Failed to STOP alsa device\n"); ++ } ++ ++ alsa_stream->period_size = 0; ++ alsa_stream->buffer_size = 0; ++ ++ if (alsa_stream->open) { ++ alsa_stream->open = 0; ++ bcm2835_audio_close(alsa_stream); ++ } ++ if (alsa_stream->chip) ++ alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; ++ /* ++ * Do not free up alsa_stream here, it will be freed up by ++ * runtime->private_free callback we registered in *_open above ++ */ ++ ++ audio_info(" .. OUT\n"); ++ ++ return 0; ++} ++ ++/* hw_params callback */ ++static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ int err; ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = ++ (bcm2835_alsa_stream_t *) runtime->private_data; ++ ++ audio_info(" .. IN\n"); ++ ++ err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); ++ if (err < 0) { ++ audio_error ++ (" pcm_lib_malloc failed to allocated pages for buffers\n"); ++ return err; ++ } ++ ++ err = bcm2835_audio_set_params(alsa_stream, params_channels(params), ++ params_rate(params), ++ snd_pcm_format_width(params_format ++ (params))); ++ if (err < 0) { ++ audio_error(" error setting hw params\n"); ++ } ++ ++ bcm2835_audio_setup(alsa_stream); ++ audio_info(" .. OUT\n"); ++ ++ return err; ++} ++ ++/* hw_free callback */ ++static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream) ++{ ++ audio_info(" .. IN\n"); ++ return snd_pcm_lib_free_pages(substream); ++} ++ ++/* prepare callback */ ++static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ ++ audio_info(" .. IN\n"); ++ ++ alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); ++ alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); ++ alsa_stream->pos = 0; ++ ++ audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", ++ alsa_stream->buffer_size, alsa_stream->period_size, ++ alsa_stream->pos, runtime->frame_bits); ++ ++ audio_info(" .. OUT\n"); ++ return 0; ++} ++ ++/* trigger callback */ ++static int snd_bcm2835_pcm_trigger(struct snd_pcm_substream *substream, int cmd) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ int err = 0; ++ ++ audio_info(" .. IN\n"); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n", ++ alsa_stream->running); ++ if (!alsa_stream->running) { ++ err = bcm2835_audio_start(alsa_stream); ++ if (err == 0) { ++ alsa_stream->running = 1; ++ alsa_stream->draining = 1; ++ } ++ } ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ audio_debug ++ ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n", ++ runtime->status->state == SNDRV_PCM_STATE_DRAINING, ++ alsa_stream->running); ++ if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) { ++ audio_info("DRAINING\n"); ++ alsa_stream->draining = 1; ++ } else { ++ audio_info("DROPPING\n"); ++ alsa_stream->draining = 0; ++ } ++ if (alsa_stream->running) { ++ err = bcm2835_audio_stop(alsa_stream); ++ if (err != 0) ++ audio_error(" Failed to STOP alsa device\n"); ++ alsa_stream->running = 0; ++ } ++ break; ++ default: ++ err = -EINVAL; ++ } ++ ++ audio_info(" .. OUT\n"); ++ return err; ++} ++ ++/* pointer callback */ ++static snd_pcm_uframes_t ++snd_bcm2835_pcm_pointer(struct snd_pcm_substream *substream) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ ++ audio_info(" .. IN\n"); ++ ++ audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, ++ frames_to_bytes(runtime, runtime->status->hw_ptr), ++ frames_to_bytes(runtime, runtime->control->appl_ptr), ++ alsa_stream->pos); ++ ++ audio_info(" .. OUT\n"); ++ return bytes_to_frames(runtime, alsa_stream->pos); ++} ++ ++static int snd_bcm2835_pcm_copy(struct snd_pcm_substream *substream, ++ int channel, snd_pcm_uframes_t pos, void *src, ++ snd_pcm_uframes_t count) ++{ ++ int ret; ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ ++ audio_info(" .. IN\n"); ++ audio_debug("copy.......... (%d) hwptr=%d appl=%d pos=%d\n", ++ frames_to_bytes(runtime, count), frames_to_bytes(runtime, ++ runtime-> ++ status-> ++ hw_ptr), ++ frames_to_bytes(runtime, runtime->control->appl_ptr), ++ alsa_stream->pos); ++ ret = ++ bcm2835_audio_write(alsa_stream, frames_to_bytes(runtime, count), ++ src); ++ audio_info(" .. OUT\n"); ++ return ret; ++} ++ ++static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream, ++ unsigned int cmd, void *arg) ++{ ++ int ret = snd_pcm_lib_ioctl(substream, cmd, arg); ++ audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream, ++ cmd, arg, arg ? *(unsigned *)arg : 0, ret); ++ return ret; ++} ++ ++/* operators */ ++static struct snd_pcm_ops snd_bcm2835_playback_ops = { ++ .open = snd_bcm2835_playback_open, ++ .close = snd_bcm2835_playback_close, ++ .ioctl = snd_bcm2835_pcm_lib_ioctl, ++ .hw_params = snd_bcm2835_pcm_hw_params, ++ .hw_free = snd_bcm2835_pcm_hw_free, ++ .prepare = snd_bcm2835_pcm_prepare, ++ .trigger = snd_bcm2835_pcm_trigger, ++ .pointer = snd_bcm2835_pcm_pointer, ++ .copy = snd_bcm2835_pcm_copy, ++}; ++ ++/* create a pcm device */ ++int __devinit snd_bcm2835_new_pcm(bcm2835_chip_t * chip) ++{ ++ struct snd_pcm *pcm; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ err = ++ snd_pcm_new(chip->card, "bcm2835 ALSA", 0, MAX_SUBSTREAMS, 0, &pcm); ++ if (err < 0) ++ return err; ++ pcm->private_data = chip; ++ strcpy(pcm->name, "bcm2835 ALSA"); ++ chip->pcm = pcm; ++ chip->dest = AUDIO_DEST_AUTO; ++ chip->volume = 100; ++ /* set operators */ ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ &snd_bcm2835_playback_ops); ++ ++ /* pre-allocation of buffers */ ++ /* NOTE: this may fail */ ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, ++ snd_dma_continuous_data ++ (GFP_KERNEL), 64 * 1024, ++ 64 * 1024); ++ ++ audio_info(" .. OUT\n"); ++ ++ return 0; ++} +diff -urN upstream-3.2.21/sound/arm/bcm2835-vchiq.c bootc-3.2.21/sound/arm/bcm2835-vchiq.c +--- upstream-3.2.21/sound/arm/bcm2835-vchiq.c 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/sound/arm/bcm2835-vchiq.c 2012-06-23 23:52:59.000000000 +0000 +@@ -0,0 +1,818 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* ---- Include Files -------------------------------------------------------- */ ++ ++#include "interface/vchi/vchi.h" ++#include "interface/vcos/vcos.h" ++#include "interface/vcos/vcos_logging.h" ++#include "vc_vchi_audioserv_defs.h" ++ ++/* ---- Private Constants and Types ------------------------------------------ */ ++ ++/* VCOS logging category for this service */ ++#define VCOS_LOG_CATEGORY (&audio_log_category) ++ ++/* Default VCOS logging level */ ++#define LOG_LEVEL VCOS_LOG_WARN ++ ++/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */ ++#define LOG_ERR( fmt, arg... ) vcos_log_error( "%s:%d " fmt, __func__, __LINE__, ##arg) ++#define LOG_WARN( fmt, arg... ) vcos_log_warn( "%s:%d " fmt, __func__, __LINE__, ##arg) ++#define LOG_INFO( fmt, arg... ) vcos_log_info( "%s:%d " fmt, __func__, __LINE__, ##arg) ++#define LOG_DBG( fmt, arg... ) vcos_log_info( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++typedef struct opaque_AUDIO_INSTANCE_T { ++ uint32_t num_connections; ++ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; ++ VCOS_EVENT_T msg_avail_event; ++ VCOS_MUTEX_T vchi_mutex; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int32_t result, got_result; ++} AUDIO_INSTANCE_T; ++ ++/* ---- Private Variables ---------------------------------------------------- */ ++ ++/* VCOS logging category for this service */ ++static VCOS_LOG_CAT_T audio_log_category; ++ ++/* ---- Private Function Prototypes ------------------------------------------ */ ++ ++/* ---- Private Functions ---------------------------------------------------- */ ++ ++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream); ++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream); ++ ++typedef struct { ++ struct work_struct my_work; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int x; ++} my_work_t; ++ ++static void my_wq_function(struct work_struct *work) ++{ ++ my_work_t *w = (my_work_t *) work; ++ int ret = -9; ++ LOG_DBG(" .. IN %p:%d\n", w->alsa_stream, w->x); ++ switch (w->x) { ++ case 1: ++ ret = bcm2835_audio_start_worker(w->alsa_stream); ++ break; ++ case 2: ++ ret = bcm2835_audio_stop_worker(w->alsa_stream); ++ break; ++ default: ++ LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->x); ++ break; ++ } ++ kfree((void *)work); ++ LOG_DBG(" .. OUT %d\n", ret); ++} ++ ++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ int ret = -1; ++ LOG_DBG(" .. IN\n"); ++ if (alsa_stream->my_wq) { ++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); ++ /* Queue some work (item 1) */ ++ if (work) { ++ INIT_WORK((struct work_struct *)work, my_wq_function); ++ work->alsa_stream = alsa_stream; ++ work->x = 1; ++ if (queue_work ++ (alsa_stream->my_wq, (struct work_struct *)work)) ++ ret = 0; ++ } else ++ LOG_ERR(" .. Error: NULL work kmalloc\n"); ++ } ++ LOG_DBG(" .. OUT %d\n", ret); ++ return ret; ++} ++ ++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ int ret = -1; ++ LOG_DBG(" .. IN\n"); ++ if (alsa_stream->my_wq) { ++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); ++ /* Queue some work (item 1) */ ++ if (work) { ++ INIT_WORK((struct work_struct *)work, my_wq_function); ++ work->alsa_stream = alsa_stream; ++ work->x = 2; ++ if (queue_work ++ (alsa_stream->my_wq, (struct work_struct *)work)) ++ ret = 0; ++ } else ++ LOG_ERR(" .. Error: NULL work kmalloc\n"); ++ } ++ LOG_DBG(" .. OUT %d\n", ret); ++ return ret; ++} ++ ++void my_workqueue_init(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ alsa_stream->my_wq = create_workqueue("my_queue"); ++} ++ ++void my_workqueue_quit(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ if (alsa_stream->my_wq) { ++ flush_workqueue(alsa_stream->my_wq); ++ destroy_workqueue(alsa_stream->my_wq); ++ alsa_stream->my_wq = NULL; ++ } ++} ++ ++static void audio_vchi_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *msg_handle) ++{ ++ AUDIO_INSTANCE_T *instance = (AUDIO_INSTANCE_T *) param; ++ int32_t status; ++ int32_t msg_len; ++ VC_AUDIO_MSG_T m; ++ bcm2835_alsa_stream_t *alsa_stream = 0; ++ LOG_DBG(" .. IN instance=%p, param=%p, reason=%d, handle=%p\n", ++ instance, param, reason, msg_handle); ++ ++ if (!instance || reason != VCHI_CALLBACK_MSG_AVAILABLE) { ++ return; ++ } ++ alsa_stream = instance->alsa_stream; ++ status = vchi_msg_dequeue(instance->vchi_handle[0], ++ &m, sizeof m, &msg_len, VCHI_FLAGS_NONE); ++ if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { ++ LOG_DBG ++ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n", ++ instance, m.u.result.success); ++ BUG_ON(instance->got_result); ++ instance->result = m.u.result.success; ++ instance->got_result = 1; ++ vcos_event_signal(&instance->msg_avail_event); ++ } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { ++ irq_handler_t callback = (irq_handler_t) m.u.complete.callback; ++ LOG_DBG ++ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n", ++ instance, m.u.complete.count); ++ if (alsa_stream && callback) { ++ atomic_add(m.u.complete.count, &alsa_stream->retrieved); ++ callback(0, alsa_stream); ++ } else { ++ LOG_DBG(" .. unexpected alsa_stream=%p, callback=%p\n", ++ alsa_stream, callback); ++ } ++ vcos_event_signal(&instance->msg_avail_event); ++ } else { ++ LOG_DBG(" .. unexpected m.type=%d\n", m.type); ++ } ++} ++ ++static AUDIO_INSTANCE_T *vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance, ++ VCHI_CONNECTION_T ** ++ vchi_connections, ++ uint32_t num_connections) ++{ ++ uint32_t i; ++ AUDIO_INSTANCE_T *instance; ++ VCOS_STATUS_T status; ++ ++ LOG_DBG("%s: start", __func__); ++ ++ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { ++ LOG_ERR("%s: unsupported number of connections %u (max=%u)", ++ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); ++ ++ return NULL; ++ } ++ /* Allocate memory for this instance */ ++ instance = vcos_malloc(sizeof(*instance), "audio_instance"); ++ memset(instance, 0, sizeof(*instance)); ++ ++ instance->num_connections = num_connections; ++ /* Create the message available event */ ++ status = ++ vcos_event_create(&instance->msg_avail_event, "audio_msg_avail"); ++ if (status != VCOS_SUCCESS) { ++ LOG_ERR("%s: failed to create event (status=%d)", __func__, ++ status); ++ ++ goto err_free_mem; ++ } ++ /* Create a lock for exclusive, serialized VCHI connection access */ ++ status = vcos_mutex_create(&instance->vchi_mutex, "audio_vchi_mutex"); ++ if (status != VCOS_SUCCESS) { ++ LOG_ERR("%s: failed to create event (status=%d)", __func__, ++ status); ++ ++ goto err_delete_event; ++ } ++ /* Open the VCHI service connections */ ++ for (i = 0; i < num_connections; i++) { ++ SERVICE_CREATION_T params = { ++ VC_AUDIO_SERVER_NAME, // 4cc service code ++ vchi_connections[i], // passed in fn pointers ++ 0, // rx fifo size (unused) ++ 0, // tx fifo size (unused) ++ audio_vchi_callback, // service callback ++ instance, // service callback parameter ++ VCOS_TRUE, //TODO: remove VCOS_FALSE, // unaligned bulk recieves ++ VCOS_TRUE, //TODO: remove VCOS_FALSE, // unaligned bulk transmits ++ VCOS_FALSE // want crc check on bulk transfers ++ }; ++ ++ status = vchi_service_open(vchi_instance, ¶ms, ++ &instance->vchi_handle[i]); ++ if (status != VCOS_SUCCESS) { ++ LOG_ERR ++ ("%s: failed to open VCHI service connection (status=%d)", ++ __func__, status); ++ ++ goto err_close_services; ++ } ++ /* Finished with the service for now */ ++ vchi_service_release(instance->vchi_handle[i]); ++ } ++ ++ return instance; ++ ++err_close_services: ++ for (i = 0; i < instance->num_connections; i++) { ++ vchi_service_close(instance->vchi_handle[i]); ++ } ++ ++ vcos_mutex_delete(&instance->vchi_mutex); ++ ++err_delete_event: ++ vcos_event_delete(&instance->msg_avail_event); ++ ++err_free_mem: ++ vcos_free(instance); ++ ++ return NULL; ++} ++ ++static int32_t vc_vchi_audio_deinit(AUDIO_INSTANCE_T * instance) ++{ ++ uint32_t i; ++ ++ LOG_DBG(" .. IN\n"); ++ ++ if (instance == NULL) { ++ LOG_ERR("%s: invalid handle %p", __func__, instance); ++ ++ return -1; ++ } ++ ++ LOG_DBG(" .. about to lock (%d)\n", instance->num_connections); ++ vcos_mutex_lock(&instance->vchi_mutex); ++ ++ /* Close all VCHI service connections */ ++ for (i = 0; i < instance->num_connections; i++) { ++ int32_t success; ++ LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]); ++ vchi_service_use(instance->vchi_handle[i]); ++ ++ success = vchi_service_close(instance->vchi_handle[i]); ++ if (success != 0) { ++ LOG_ERR ++ ("%s: failed to close VCHI service connection (status=%d)", ++ __func__, success); ++ } ++ } ++ ++ vcos_mutex_unlock(&instance->vchi_mutex); ++ ++ vcos_mutex_delete(&instance->vchi_mutex); ++ ++ vcos_event_delete(&instance->msg_avail_event); ++ ++ vcos_free(instance); ++ ++ /* Unregister the log category so we can add it back next time */ ++ vcos_log_unregister(&audio_log_category); ++ ++ LOG_DBG(" .. OUT\n"); ++ ++ return 0; ++} ++ ++static int bcm2835_audio_open_connection(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ static VCHI_INSTANCE_T vchi_instance; ++ static VCHI_CONNECTION_T *vchi_connection; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO("%s: start", __func__); ++ //BUG_ON(instance); ++ if (instance) { ++ LOG_ERR("%s: VCHI instance already open (%p)", ++ __func__, instance); ++ instance->alsa_stream = alsa_stream; ++ alsa_stream->instance = instance; ++ ret = 0; // xxx todo -1; ++ goto err_free_mem; ++ } ++ ++ /* Initialize and create a VCHI connection */ ++ ret = vchi_initialise(&vchi_instance); ++ if (ret != 0) { ++ LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ret = vchi_connect(NULL, 0, vchi_instance); ++ if (ret != 0) { ++ LOG_ERR("%s: failed to connect VCHI instance (ret=%d)", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ++ /* Set up the VCOS logging */ ++ vcos_log_set_level(VCOS_LOG_CATEGORY, LOG_LEVEL); ++ vcos_log_register("audio", VCOS_LOG_CATEGORY); ++ ++ /* Initialize an instance of the audio service */ ++ instance = vc_vchi_audio_init(vchi_instance, &vchi_connection, 1); ++ ++ if (instance == NULL /*|| audio_handle != instance */ ) { ++ LOG_ERR("%s: failed to initialize audio service", __func__); ++ ++ ret = -EPERM; ++ goto err_free_mem; ++ } ++ ++ instance->alsa_stream = alsa_stream; ++ alsa_stream->instance = instance; ++ ++ LOG_DBG(" success !\n"); ++err_free_mem: ++ LOG_DBG(" .. OUT\n"); ++ ++ return ret; ++} ++ ++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ AUDIO_INSTANCE_T *instance; ++ VC_AUDIO_MSG_T m; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ my_workqueue_init(alsa_stream); ++ ++ ret = bcm2835_audio_open_connection(alsa_stream); ++ if (ret != 0) { ++ ret = -1; ++ goto exit; ++ } ++ instance = alsa_stream->instance; ++ ++ vcos_mutex_lock(&instance->vchi_mutex); ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_OPEN; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ vcos_mutex_unlock(&instance->vchi_mutex); ++exit: ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++static int bcm2835_audio_set_ctls_chan(bcm2835_alsa_stream_t * alsa_stream, ++ bcm2835_chip_t * chip) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO ++ (" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); ++ ++ vcos_mutex_lock(&instance->vchi_mutex); ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ instance->got_result = 0; ++ instance->result = -1; ++ ++ m.type = VC_AUDIO_MSG_TYPE_CONTROL; ++ m.u.control.dest = chip->dest; ++ m.u.control.volume = chip->volume; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ /* We are expecting a reply from the videocore */ ++ while (!instance->got_result) { ++ success = vcos_event_wait(&instance->msg_avail_event); ++ if (success != VCOS_SUCCESS) { ++ LOG_ERR("%s: failed on waiting for event (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ } ++ ++ if (instance->result != 0) { ++ LOG_ERR("%s: result=%d", __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ vcos_mutex_unlock(&instance->vchi_mutex); ++ ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip) ++{ ++ int i; ++ int ret = 0; ++ LOG_DBG(" .. IN\n"); ++ /* change ctls for all substreams */ ++ for (i = 0; i < MAX_SUBSTREAMS; i++) { ++ if (chip->avail_substreams & (1 << i)) { ++ if (!chip->alsa_stream[i]) ++ ret = 0; ++ else if (bcm2835_audio_set_ctls_chan ++ (chip->alsa_stream[i], chip) != 0) ++ ret = -1; ++ } ++ } ++ LOG_DBG(" .. OUT ret=%d\n", ret); ++ return ret; ++} ++ ++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream, ++ uint32_t channels, uint32_t samplerate, ++ uint32_t bps) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO ++ (" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n", ++ channels, samplerate, bps); ++ ++ /* resend ctls - alsa_stream may not have been open when first send */ ++ ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip); ++ if (ret != 0) { ++ LOG_ERR(" Alsa controls not supported\n"); ++ return -EINVAL; ++ } ++ ++ vcos_mutex_lock(&instance->vchi_mutex); ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ instance->got_result = 0; ++ instance->result = -1; ++ ++ m.type = VC_AUDIO_MSG_TYPE_CONFIG; ++ m.u.config.channels = channels; ++ m.u.config.samplerate = samplerate; ++ m.u.config.bps = bps; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ /* We are expecting a reply from the videocore */ ++ while (!instance->got_result) { ++ success = vcos_event_wait(&instance->msg_avail_event); ++ if (success != VCOS_SUCCESS) { ++ LOG_ERR("%s: failed on waiting for event (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ } ++ ++ if (instance->result != 0) { ++ LOG_ERR("%s: result=%d", __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ vcos_mutex_unlock(&instance->vchi_mutex); ++ ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_DBG(" .. OUT\n"); ++ ++ return 0; ++} ++ ++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ vcos_mutex_lock(&instance->vchi_mutex); ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_START; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ vcos_mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ vcos_mutex_lock(&instance->vchi_mutex); ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_STOP; ++ m.u.stop.draining = alsa_stream->draining; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ vcos_mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ my_workqueue_quit(alsa_stream); ++ ++ vcos_mutex_lock(&instance->vchi_mutex); ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_CLOSE; ++ instance->got_result = 0; ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)", ++ __func__, success); ++ ret = -1; ++ goto unlock; ++ } ++ while (!instance->got_result) { ++ success = vcos_event_wait(&instance->msg_avail_event); ++ if (success != VCOS_SUCCESS) { ++ LOG_ERR("%s: failed on waiting for event (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ } ++ if (instance->result != 0) { ++ LOG_ERR("%s: failed result (status=%d)", ++ __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ vcos_mutex_unlock(&instance->vchi_mutex); ++ ++ /* Stop the audio service */ ++ if (instance) { ++ vc_vchi_audio_deinit(instance); ++ alsa_stream->instance = NULL; ++ } ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_write(bcm2835_alsa_stream_t * alsa_stream, uint32_t count, ++ void *src) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO(" Writing %d bytes from %p\n", count, src); ++ ++ vcos_mutex_lock(&instance->vchi_mutex); ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_WRITE; ++ m.u.write.count = count; ++ m.u.write.callback = alsa_stream->fifo_irq_handler; ++ m.u.write.cookie = alsa_stream; ++ m.u.write.silence = src == NULL; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ LOG_DBG(" ... sent header\n"); ++ if (!m.u.write.silence) { ++ /* Send the message to the videocore */ ++ success = vchi_bulk_queue_transmit(instance->vchi_handle[0], ++ src, count, ++ 0 * ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED ++ + ++ 1 * ++ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ, ++ NULL); ++ if (success != 0) { ++ LOG_ERR ++ ("%s: failed on vchi_bulk_queue_transmit (status=%d)", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ } ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ vcos_mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++/** ++ * Returns all buffers from arm->vc ++ */ ++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ LOG_DBG(" .. OUT\n"); ++ return; ++} ++ ++/** ++ * Forces VC to flush(drop) its filled playback buffers and ++ * return them the us. (VC->ARM) ++ */ ++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ LOG_DBG(" .. OUT\n"); ++} ++ ++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ uint32_t count = atomic_read(&alsa_stream->retrieved); ++ atomic_sub(count, &alsa_stream->retrieved); ++ return count; ++} +diff -urN upstream-3.2.21/sound/arm/Kconfig bootc-3.2.21/sound/arm/Kconfig +--- upstream-3.2.21/sound/arm/Kconfig 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/sound/arm/Kconfig 2012-06-23 23:52:59.000000000 +0000 +@@ -39,5 +39,12 @@ + Say Y or M if you want to support any AC97 codec attached to + the PXA2xx AC97 interface. + ++config SND_BCM2835 ++ tristate "BCM2835 ALSA driver" ++ depends on ARCH_BCM2708 && SND ++ select SND_PCM ++ help ++ Say Y or M if you want to support BCM2835 Alsa pcm card driver ++ + endif # SND_ARM + +diff -urN upstream-3.2.21/sound/arm/Makefile bootc-3.2.21/sound/arm/Makefile +--- upstream-3.2.21/sound/arm/Makefile 2012-06-19 22:18:30.000000000 +0000 ++++ bootc-3.2.21/sound/arm/Makefile 2012-06-23 23:52:59.000000000 +0000 +@@ -14,3 +14,9 @@ + + obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o + snd-pxa2xx-ac97-objs := pxa2xx-ac97.o ++ ++obj-$(CONFIG_SND_BCM2835) += snd-bcm2835.o ++snd-bcm2835-objs := bcm2835.o bcm2835-ctl.o bcm2835-pcm.o bcm2835-vchiq.o ++ ++EXTRA_CFLAGS += -Idrivers/misc/vc04_services -Idrivers/misc/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000 ++ +diff -urN upstream-3.2.21/sound/arm/vc_vchi_audioserv_defs.h bootc-3.2.21/sound/arm/vc_vchi_audioserv_defs.h +--- upstream-3.2.21/sound/arm/vc_vchi_audioserv_defs.h 1970-01-01 00:00:00.000000000 +0000 ++++ bootc-3.2.21/sound/arm/vc_vchi_audioserv_defs.h 2012-06-23 23:52:59.000000000 +0000 +@@ -0,0 +1,112 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef _VC_AUDIO_DEFS_H_ ++#define _VC_AUDIO_DEFS_H_ ++ ++// FourCC code used for VCHI connection ++#define VC_AUDIO_SERVER_NAME MAKE_FOURCC("AUDS") ++ ++// Maximum message length ++#define VC_AUDIO_MAX_MSG_LEN (sizeof( VC_AUDIO_MSG_T )) ++ ++// List of screens that are currently supported ++// All message types supported for HOST->VC direction ++typedef enum { ++ VC_AUDIO_MSG_TYPE_RESULT, // Generic result ++ VC_AUDIO_MSG_TYPE_COMPLETE, // Generic result ++ VC_AUDIO_MSG_TYPE_CONFIG, // Configure audio ++ VC_AUDIO_MSG_TYPE_CONTROL, // Configure audio ++ VC_AUDIO_MSG_TYPE_OPEN, // Configure audio ++ VC_AUDIO_MSG_TYPE_CLOSE, // Configure audio ++ VC_AUDIO_MSG_TYPE_START, // Configure audio ++ VC_AUDIO_MSG_TYPE_STOP, // Configure audio ++ VC_AUDIO_MSG_TYPE_WRITE, // Configure audio ++ VC_AUDIO_MSG_TYPE_MAX ++} VC_AUDIO_MSG_TYPE; ++ ++// configure the audio ++typedef struct { ++ uint32_t channels; ++ uint32_t samplerate; ++ uint32_t bps; ++ ++} VC_AUDIO_CONFIG_T; ++ ++typedef struct { ++ uint32_t volume; ++ uint32_t dest; ++ ++} VC_AUDIO_CONTROL_T; ++ ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_OPEN_T; ++ ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_CLOSE_T; ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_START_T; ++// audio ++typedef struct { ++ uint32_t draining; ++ ++} VC_AUDIO_STOP_T; ++ ++// configure the write audio samples ++typedef struct { ++ uint32_t count; // in bytes ++ void *callback; ++ void *cookie; ++ uint32_t silence; ++} VC_AUDIO_WRITE_T; ++ ++// Generic result for a request (VC->HOST) ++typedef struct { ++ int32_t success; // Success value ++ ++} VC_AUDIO_RESULT_T; ++ ++// Generic result for a request (VC->HOST) ++typedef struct { ++ int32_t count; // Success value ++ void *callback; ++ void *cookie; ++} VC_AUDIO_COMPLETE_T; ++ ++// Message header for all messages in HOST->VC direction ++typedef struct { ++ int32_t type; // Message type (VC_AUDIO_MSG_TYPE) ++ union { ++ VC_AUDIO_CONFIG_T config; ++ VC_AUDIO_CONTROL_T control; ++ VC_AUDIO_OPEN_T open; ++ VC_AUDIO_CLOSE_T close; ++ VC_AUDIO_START_T start; ++ VC_AUDIO_STOP_T stop; ++ VC_AUDIO_WRITE_T write; ++ VC_AUDIO_RESULT_T result; ++ VC_AUDIO_COMPLETE_T complete; ++ } u; ++} VC_AUDIO_MSG_T; ++ ++#endif // _VC_AUDIO_DEFS_H_ diff -Nru linux-3.2.21/debian/patches/series linux-3.2.21/debian/patches/series --- linux-3.2.21/debian/patches/series 2012-06-21 04:30:33.000000000 +0100 +++ linux-3.2.21/debian/patches/series 2012-06-25 19:58:18.000000000 +0100 @@ -1,358 +1,3 @@ -debian/version.patch +debian/version.patch debian/kernelvariables.patch -debian/doc-build-parallel.patch - -features/all/drivers-media-dvb-usb-af9005-request_firmware.patch - -features/all/sound-pci-cs46xx-request_firmware.patch - -# Patches and source files from aufs3 repository, imported with -# debian/patches/features/all/aufs3/gen-patch. -features/all/aufs3/aufs3-base.patch -features/all/aufs3/aufs3-standalone.patch -features/all/aufs3/aufs3-kbuild.patch -features/all/aufs3/aufs3-add.patch -# mark as staging/crap -features/all/aufs3/mark-as-staging.patch -# fix added exports from security/device_cgroup.c -features/all/aufs3/aufs3-fix-export-__devcgroup_inode_permission.patch - -bugfix/ia64/hardcode-arch-script-output.patch -bugfix/mips/disable-advansys.patch -bugfix/arm/disable-scsi_acard.patch -debian/mips-disable-werror.patch -bugfix/powerpc/lpar-console.patch - -debian/sysrq-mask.patch - -debian/arch-sh4-fix-uimage-build.patch - -debian/af_802154-Disable-auto-loading-as-mitigation-against.patch -debian/rds-Disable-auto-loading-as-mitigation-against-local.patch -debian/decnet-Disable-auto-loading-as-mitigation-against-lo.patch - -bugfix/all/dm-Deal-with-merge_bvec_fn-in-component-devices-bett.patch -features/all/Kbuild-kconfig-Verbose-version-of-listnewconfig.patch - -debian/sched-autogroup-disabled.patch -#+ bugfix/all/rt2800-disable-powersaving-as-default.patch -features/all/cgroups-Allow-memory-cgroup-support-to-be-included-b.patch -debian/cgroups-Document-the-Debian-memory-resource-controll.patch -bugfix/ia64/nouveau-ACPI-support-is-dependent-on-X86.patch -features/x86/x86-Add-amilo-rfkill-driver-for-some-Fujitsu-Siemens.patch - -bugfix/arm/ixp4xx_iobe.patch - -debian/bcma-Do-not-claim-PCI-device-IDs-also-claimed-by-brc.patch - -bugfix/all/0004-media-staging-lirc_serial-Fix-bogus-error-codes.patch - -debian/x86-memtest-WARN-if-bad-RAM-found.patch -bugfix/all/snapshot-Implement-compat_ioctl.patch -debian/ARM-Remove-use-of-possibly-undefined-BUILD_BUG_ON-in.patch -bugfix/arm/ARM-topdown-mmap.patch -bugfix/alpha/alpha-add-io-read-write-16-32-be-functions.patch -features/arm/ARM-kirkwood-6282A1.patch -features/all/Input-ALPS-move-protocol-information-to-Documentatio.patch -features/all/Input-ALPS-add-protocol-version-field-in-alps_model_.patch -features/all/Input-ALPS-remove-assumptions-about-packet-size.patch -features/all/Input-ALPS-add-support-for-protocol-versions-3-and-4.patch -features/all/Input-ALPS-add-semi-MT-support-for-v3-protocol.patch -bugfix/x86/KVM-nVMX-Add-KVM_REQ_IMMEDIATE_EXIT.patch -bugfix/x86/KVM-nVMX-Fix-warning-causing-idt-vectoring-info-beha.patch - -features/all/hwmon-it87-Add-IT8728F-support.patch - -bugfix/x86/drm-i915-do-not-enable-RC6p-on-Sandy-Bridge.patch -bugfix/x86/drm-i915-fix-operator-precedence-when-enabling-RC6p.patch - -features/all/fs-symlink-restrictions-on-sticky-directories.patch -features/all/fs-symlink-restrictions-on-sticky-directories-fix-2.patch -features/all/fs-hardlink-creation-restrictions.patch -features/all/fs-hardlink-creation-restrictions-fix.patch -features/all/fs-hardlink-creation-restriction-cleanup.patch -bugfix/all/kbuild-do-not-check-for-ancient-modutils-tools.patch - -# Temporary, until the original change has been tested some more -debian/revert-CIFS-Respect-negotiated-MaxMpxCount.patch - -# Update all Hyper-V drivers to 3.4-rc1 (no longer staging) -features/x86/hyperv/0001-NLS-improve-UTF8-UTF16-string-conversion-routine.patch -features/x86/hyperv/0002-HID-Move-the-hid-hyperv-driver-out-of-staging.patch -features/x86/hyperv/0003-Staging-hv-storvsc-Use-mempools-to-allocate-struct-s.patch -features/x86/hyperv/0004-Staging-hv-storvsc-Cleanup-error-handling-in-the-pro.patch -features/x86/hyperv/0005-Staging-hv-storvsc-Fixup-the-error-when-processing-S.patch -features/x86/hyperv/0006-Staging-hv-storvsc-Fix-error-handling-storvsc_host_r.patch -features/x86/hyperv/0007-Staging-hv-storvsc-Use-the-accessor-function-shost_p.patch -features/x86/hyperv/0008-Staging-hv-storvsc-Use-the-unlocked-version-queuecom.patch -features/x86/hyperv/0009-Staging-hv-storvsc-use-the-macro-KBUILD_MODNAME.patch -features/x86/hyperv/0010-Staging-hv-storvsc-Get-rid-of-an-unnecessary-forward.patch -features/x86/hyperv/0011-Staging-hv-storvsc-Upgrade-the-vmstor-protocol-versi.patch -features/x86/hyperv/0012-Staging-hv-storvsc-Support-hot-add-of-scsi-disks.patch -features/x86/hyperv/0013-Staging-hv-storvsc-Support-hot-removing-of-scsi-devi.patch -features/x86/hyperv/0014-staging-hv-Use-kmemdup-rather-than-duplicating-its-i.patch -features/x86/hyperv/0015-Staging-hv-vmbus-Support-building-the-vmbus-driver-a.patch -features/x86/hyperv/0016-hv-Add-Kconfig-menu-entry.patch -features/x86/hyperv/0017-Staging-hv-mousevsc-Remove-the-mouse-driver-from-the.patch -features/x86/hyperv/0018-staging-hv-move-hv_netvsc-out-of-staging-area.patch -features/x86/hyperv/0019-net-hyperv-Fix-long-lines-in-netvsc.c.patch -features/x86/hyperv/0020-net-hyperv-Add-support-for-promiscuous-mode-setting.patch -features/x86/hyperv/0021-Staging-hv-storvsc-Disable-clustering.patch -features/x86/hyperv/0022-Staging-hv-storvsc-Cleanup-storvsc_device_alloc.patch -features/x86/hyperv/0023-Staging-hv-storvsc-Fix-a-bug-in-storvsc_command_comp.patch -features/x86/hyperv/0024-Staging-hv-storvsc-Fix-a-bug-in-copy_from_bounce_buf.patch -features/x86/hyperv/0025-Staging-hv-storvsc-Implement-per-device-memory-pools.patch -features/x86/hyperv/0026-Staging-hv-update-TODO-file.patch -features/x86/hyperv/0027-HID-hv_mouse-Properly-add-the-hid-device.patch -features/x86/hyperv/0028-Staging-hv-storvsc-Fix-a-bug-in-create_bounce_buffer.patch -features/x86/hyperv/0029-net-hyperv-Fix-the-stop-wake-queue-mechanism.patch -features/x86/hyperv/0030-Drivers-hv-Fix-a-memory-leak.patch -features/x86/hyperv/0031-Drivers-hv-Make-the-vmbus-driver-unloadable.patch -features/x86/hyperv/0032-Drivers-hv-Get-rid-of-an-unnecessary-check-in-hv.c.patch -features/x86/hyperv/0033-net-hyperv-Remove-unnecessary-kmap_atomic-in-netvsc-.patch -features/x86/hyperv/0034-net-hyperv-Add-NETVSP-protocol-version-negotiation.patch -features/x86/hyperv/0035-net-hyperv-Add-support-for-jumbo-frame-up-to-64KB.patch -features/x86/hyperv/0036-net-hyperv-fix-possible-memory-leak-in-do_set_multic.patch -features/x86/hyperv/0037-drivers-hv-Get-rid-of-some-unnecessary-code.patch -features/x86/hyperv/0038-net-hyperv-rx_bytes-should-account-the-ether-header-.patch -features/x86/hyperv/0039-HID-hyperv-Properly-disconnect-the-input-device.patch -features/x86/hyperv/0040-net-hyperv-fix-the-issue-that-large-packets-be-dropp.patch -features/x86/hyperv/0041-net-hyperv-Use-netif_tx_disable-instead-of-netif_sto.patch -features/x86/hyperv/0042-net-hyperv-Fix-the-page-buffer-when-an-RNDIS-message.patch -features/x86/hyperv/0043-drivers-hv-kvp-Add-cleanup-connector-defines.patch -features/x86/hyperv/0044-drivers-hv-kvp-Move-the-contents-of-hv_kvp.h-to-hype.patch -features/x86/hyperv/0045-net-hyperv-Convert-camel-cased-variables-in-rndis_fi.patch -features/x86/hyperv/0046-net-hyperv-Correct-the-assignment-in-netvsc_recv_cal.patch -features/x86/hyperv/0047-net-hyperv-Remove-the-unnecessary-memset-in-rndis_fi.patch -features/x86/hyperv/0048-Staging-hv-storvsc-Cleanup-some-comments.patch -features/x86/hyperv/0049-Staging-hv-storvsc-Cleanup-storvsc_probe.patch -features/x86/hyperv/0050-Staging-hv-storvsc-Cleanup-storvsc_queuecommand.patch -features/x86/hyperv/0051-Staging-hv-storvsc-Introduce-defines-for-srb-status-.patch -features/x86/hyperv/0052-Staging-hv-storvsc-Cleanup-storvsc_host_reset_handle.patch -features/x86/hyperv/0053-Staging-hv-storvsc-Move-and-cleanup-storvsc_remove.patch -features/x86/hyperv/0054-Staging-hv-storvsc-Add-a-comment-to-explain-life-cyc.patch -features/x86/hyperv/0055-Staging-hv-storvsc-Get-rid-of-the-on_io_completion-i.patch -features/x86/hyperv/0056-Staging-hv-storvsc-Rename-the-context-field-in-hv_st.patch -features/x86/hyperv/0057-Staging-hv-storvsc-Miscellaneous-cleanup-of-storvsc-.patch -features/x86/hyperv/0058-Staging-hv-storvsc-Cleanup-the-code-for-generating-p.patch -features/x86/hyperv/0059-Staging-hv-storvsc-Cleanup-some-protocol-related-con.patch -features/x86/hyperv/0060-Staging-hv-storvsc-Get-rid-of-some-unused-defines.patch -features/x86/hyperv/0061-Staging-hv-storvsc-Consolidate-the-request-structure.patch -features/x86/hyperv/0062-Staging-hv-storvsc-Consolidate-all-the-wire-protocol.patch -features/x86/hyperv/0063-drivers-hv-Cleanup-the-kvp-related-state-in-hyperv.h.patch -features/x86/hyperv/0064-tools-hv-Use-hyperv.h-to-get-the-KVP-definitions.patch -features/x86/hyperv/0065-drivers-hv-kvp-Cleanup-the-kernel-user-protocol.patch -features/x86/hyperv/0066-drivers-hv-Increase-the-number-of-VCPUs-supported-in.patch -features/x86/hyperv/0067-Staging-hv-storvsc-Move-the-storage-driver-out-of-th.patch -features/x86/hyperv/0068-net-hyperv-Use-the-built-in-macro-KBUILD_MODNAME-for.patch -features/x86/hyperv/0069-net-hyperv-Fix-data-corruption-in-rndis_filter_recei.patch -features/x86/hyperv/0070-net-hyperv-Add-support-for-vlan-trunking-from-guests.patch -features/x86/hyperv/0071-Drivers-hv-Add-new-message-types-to-enhance-KVP.patch -features/x86/hyperv/0072-net-hyperv-fix-erroneous-NETDEV_TX_BUSY-use.patch -features/x86/hyperv/0073-Drivers-hv-Support-the-newly-introduced-KVP-messages.patch -features/x86/hyperv/0074-Tools-hv-Fully-support-the-new-KVP-verbs-in-the-user.patch -features/x86/hyperv/0075-Tools-hv-Support-enumeration-from-all-the-pools.patch -features/x86/hyperv/0076-net-hyperv-Fix-the-code-handling-tx-busy.patch -features/x86/hyperv/0077-hv-remove-the-second-argument-of-k-un-map_atomic.patch -features/x86/hyperv/0078-libata-add-a-host-flag-to-ignore-detected-ATA-device.patch -features/x86/hyperv/0079-ata_piix-defer-disks-to-the-Hyper-V-drivers-by-defau.patch - -features/x86/efi-stub/0001-x86-Add-missing-bzImage-fields-to-struct-setup_heade.patch -features/x86/efi-stub/0002-x86-Don-t-use-magic-strings-for-EFI-loader-signature.patch -features/x86/efi-stub/0003-efi.h-Add-struct-definition-for-boot-time-services.patch -features/x86/efi-stub/0004-efi.h-Add-efi_image_loaded_t.patch -features/x86/efi-stub/0005-efi.h-Add-allocation-types-for-boottime-allocate_pag.patch -features/x86/efi-stub/0006-efi.h-Add-graphics-protocol-guids.patch -features/x86/efi-stub/0007-efi.h-Add-boottime-locate_handle-search-types.patch -features/x86/efi-stub/0008-efi-Add-EFI-file-I-O-data-types.patch -features/x86/efi-stub/0009-x86-efi-EFI-boot-stub-support.patch -features/x86/efi-stub/0010-x86-efi-Break-up-large-initrd-reads.patch -features/x86/efi-stub/0011-x86-efi-Fix-pointer-math-issue-in-handle_ramdisks.patch -features/x86/efi-stub/0012-tools-include-Add-byteshift-headers-for-endian-acces.patch -features/x86/efi-stub/0013-x86-mkpiggy-Don-t-open-code-put_unaligned_le32.patch -features/x86/efi-stub/0014-x86-boot-Restrict-CFLAGS-for-hostprogs.patch -features/x86/efi-stub/0015-x86-efi-Fix-endian-issues-and-unaligned-accesses.patch -features/x86/efi-stub/0016-x86-boot-Correct-CFLAGS-for-hostprogs.patch -features/x86/efi-stub/0017-x86-efi-Add-dedicated-EFI-stub-entry-point.patch - -bugfix/all/brcmsmac-INTERMEDIATE-but-not-AMPDU-only-when-tracin.patch -bugfix/all/NFSv4-Rate-limit-the-state-manager-for-lock-reclaim-.patch - -bugfix/all/ext4-Report-max_batch_time-option-correctly.patch - -# Update wacom driver to 3.5ish -features/all/wacom/0001-Input-wacom-cleanup-feature-report-for-bamboos.patch -features/all/wacom/0002-Input-wacom-remove-unused-bamboo-HID-parsing.patch -features/all/wacom/0003-Input-wacom-add-some-comments-to-wacom_parse_hid.patch -features/all/wacom/0005-Input-wacom-read-3rd-gen-Bamboo-Touch-HID-data.patch -features/all/wacom/0006-Input-wacom-3rd-gen-Bamboo-P-Touch-packet-support.patch -features/all/wacom/0007-Input-wacom-ignore-unwanted-bamboo-packets.patch -features/all/wacom/0008-Input-wacom-add-support-for-Cintiq-24HD.patch -features/all/wacom/0009-Input-wacom-add-LED-support-for-Cintiq-24HD.patch -features/all/wacom/0010-Input-wacom-use-BTN_TOOL_FINGER-to-indicate-touch-de.patch -features/all/wacom/0011-Input-wacom-use-switch-statement-for-wacom_tpc_irq.patch -features/all/wacom/0012-Input-wacom-add-missing-LEDS_CLASS-to-Kconfig.patch -features/all/wacom/0013-Input-wacom-fix-3rd-gen-Bamboo-MT-when-4-fingers-are.patch -features/all/wacom/0014-Input-wacom-fix-physical-size-calculation-for-3rd-ge.patch -features/all/wacom/0015-Input-wacom-isolate-input-registration.patch -features/all/wacom/0016-Input-wacom-check-for-allocation-failure-in-probe.patch -features/all/wacom/0017-Input-wacom-wireless-monitor-framework.patch -features/all/wacom/0018-Input-wacom-create-inputs-when-wireless-connect.patch -features/all/wacom/0019-Input-wacom-wireless-battery-status.patch -features/all/wacom/0020-Input-wacom-add-basic-Intuos5-support.patch -features/all/wacom/0021-Input-wacom-add-Intuos5-Touch-Ring-ExpressKey-suppor.patch -features/all/wacom/0022-Input-wacom-add-Intuos5-Touch-Ring-LED-support.patch -features/all/wacom/0023-Input-wacom-add-Intuos5-multitouch-sensor-support.patch -features/all/wacom/0024-Input-wacom-retrieve-maximum-number-of-touch-points.patch -features/all/wacom/0025-Input-wacom-add-0xE5-MT-device-support.patch -features/all/wacom/0026-Input-wacom-return-proper-error-if-usb_get_extra_des.patch - -# Add support for Ralink RT5392/RF5372 chipset -features/all/rt2x00-add-debug-message-for-new-chipset.patch -features/all/rt2x00-add-rt5372-chipset-support.patch - -# Update be2net driver to 3.5ish -features/all/be2net/0001-sweep-the-floors-and-convert-some-.get_drvinfo-routi.patch -features/all/be2net/0002-be2net-init-vf-_if_handle-vf_pmac_id-to-handle-failu.patch -features/all/be2net/0003-be2net-stop-checking-the-UE-registers-after-an-EEH-e.patch -features/all/be2net/0004-be2net-don-t-log-more-than-one-error-on-detecting-EE.patch -features/all/be2net/0005-be2net-stop-issuing-FW-cmds-if-any-cmd-times-out.patch -features/all/be2net/0006-be2net-Fix-TX-queue-create-for-Lancer.patch -features/all/be2net/0007-be2net-add-register-dump-feature-for-Lancer.patch -features/all/be2net/0008-be2net-Add-EEPROM-dump-feature-for-Lancer.patch -features/all/be2net/0009-be2net-Fix-VLAN-promiscous-mode-for-Lancer.patch -features/all/be2net/0010-be2net-Use-V1-query-link-status-command-for-lancer.patch -features/all/be2net/0011-be2net-Move-to-new-SR-IOV-implementation-in-Lancer.patch -features/all/be2net/0012-be2net-Fix-error-recovery-paths.patch -features/all/be2net/0013-be2net-Add-error-handling-for-Lancer.patch -features/all/be2net/0014-be2net-Use-new-hash-key.patch -features/all/be2net/0015-be2net-Fix-non-utilization-of-RX-queues.patch -features/all/be2net/0016-be2net-netpoll-support.patch -features/all/be2net/0017-be2net-update-some-counters-to-display-via-ethtool.patch -features/all/be2net/0018-be2net-workaround-to-fix-a-bug-in-BE.patch -features/all/be2net/0019-be2net-fix-ethtool-ringparam-reporting.patch -features/all/be2net/0020-be2net-refactor-cleanup-vf-configuration-code.patch -features/all/be2net/0021-be2net-Add-support-for-Skyhawk-cards.patch -features/all/be2net/0022-be2net-Fix-INTx-processing-for-Lancer.patch -features/all/be2net/0023-be2net-fix-be_vlan_add-rem_vid.patch -features/all/be2net/0024-be2net-fix-range-check-for-set_qos-for-a-VF.patch -features/all/be2net/0025-be2net-query-link-status-in-be_open.patch -features/all/be2net/0026-netdev-make-net_device_ops-const.patch -features/all/be2net/0027-be2net-create-RSS-rings-even-in-multi-channel-config.patch -features/all/be2net/0028-be2net-allocate-more-headroom-in-incoming-skbs.patch -features/all/be2net/0029-be2net-add-descriptions-for-stat-counters-reported-v.patch -features/all/be2net/0030-be2net-Fix-link-status-query-command.patch -features/all/be2net/0031-be2net-Use-new-implementation-of-get-mac-list-comman.patch -features/all/be2net/0032-be2net-event-queue-re-design.patch -features/all/be2net/0033-be2net-cancel-be_worker-during-EEH-recovery.patch -features/all/be2net/0034-be2net-fix-tx-completion-cleanup.patch -features/all/be2net/0035-be2net-reset-queue-address-after-freeing.patch -features/all/be2net/0036-be2net-enable-RSS-for-ipv6-pkts.patch -features/all/be2net/0037-be2net-update-driver-version.patch -features/all/be2net/0038-be2net-Remove-unused-OFFSET_IN_PAGE-macro.patch -features/all/be2net/0039-be2net-enable-WOL-by-default-if-h-w-supports-it.patch -features/all/be2net/0040-be2net-Program-secondary-UC-MAC-address-into-MAC-fil.patch -features/all/be2net/0041-be2net-Fix-number-of-vlan-slots-in-flex-mode.patch -features/all/be2net/0042-be2net-fix-programming-of-VLAN-tags-for-VF.patch -features/all/be2net/0043-be2net-fix-ethtool-get-settings.patch -features/all/be2net/0044-be2net-Fix-VLAN-multicast-packet-reception.patch -features/all/be2net/0045-be2net-Fix-FW-download-in-Lancer.patch -features/all/be2net/0046-be2net-Fix-ethtool-self-test-for-Lancer.patch -features/all/be2net/0047-be2net-Fix-traffic-stall-INTx-mode.patch -features/all/be2net/0048-be2net-Fix-Lancer-statistics.patch -features/all/be2net/0049-be2net-Fix-wrong-status-getting-returned-for-MCC-com.patch -features/all/be2net/0050-be2net-Fix-FW-download-for-BE.patch -features/all/be2net/0051-be2net-Ignore-status-of-some-ioctls-during-driver-lo.patch -features/all/be2net/0052-be2net-fix-speed-displayed-by-ethtool-on-certain-SKU.patch -features/all/be2net/0053-be2net-update-the-driver-version.patch -features/all/be2net/0054-be2net-Fix-to-not-set-link-speed-for-disabled-functi.patch -features/all/be2net/0055-be2net-Fix-to-apply-duplex-value-as-unknown-when-lin.patch -features/all/be2net/0056-be2net-Record-receive-queue-index-in-skb-to-aid-RPS.patch -features/all/be2net/0057-be2net-Fix-EEH-error-reset-before-a-flash-dump-compl.patch -features/all/be2net/0058-be2net-avoid-disabling-sriov-while-VFs-are-assigned.patch - -# Add CoDel from 3.5, and prerequisites -features/all/net-introduce-skb_flow_dissect.patch -features/all/flow_dissector-use-a-64bit-load-store.patch -features/all/net-flow_dissector.c-missing-include-linux-export.h.patch -features/all/codel/0001-codel-Controlled-Delay-AQM.patch -features/all/codel/0002-codel-use-Newton-method-instead-of-sqrt-and-divides.patch -features/all/codel/0003-fq_codel-Fair-Queue-Codel-AQM.patch -features/all/codel/0004-net-codel-Add-missing-include-linux-prefetch.h.patch -features/all/codel/0005-net-codel-fix-build-errors.patch -features/all/codel/0006-codel-use-u16-field-instead-of-31bits-for-rec_inv_sq.patch -features/all/codel/0007-fq_codel-should-use-qdisc-backlog-as-threshold.patch - -# AppArmor userland compatibility. This had better be gone in wheezy+1! -features/all/AppArmor-compatibility-patch-for-v5-interface.patch - -bugfix/x86/mm-pmd_read_atomic-fix-32bit-pae-pmd-walk-vs-pmd_populate-smp-race.patch -bugfix/x86/thp-avoid-atomic64_read-in-pmd_read_atomic-for-32bit-pae.patch -bugfix/all/hugepages-fix-use-after-free-bug-in-quota-handling.patch - -# netdev features, probably useful for other backports but not needed yet -#features/all/define-netdev_features_t.patch -#features/all/filter-Allow-to-create-sk-unattached-filters.patch - -# procfs hidepid from 3.4 -features/all/hidepid/0001-procfs-parse-mount-options.patch -features/all/hidepid/0002-procfs-add-hidepid-and-gid-mount-options.patch -features/all/hidepid/0003-proc-fix-null-pointer-deref-in-proc_pid_permission.patch -features/all/hidepid/0004-proc-fix-mount-t-proc-o-AAA.patch - -bugfix/all/NFSv4-Reduce-the-footprint-of-the-idmapper.patch -bugfix/all/NFSv4-Further-reduce-the-footprint-of-the-idmapper.patch -bugfix/all/net-sock-validate-data_len-before-allocating-skb-in-.patch - -bugfix/all/macvtap-zerocopy-fix-offset-calculation-when-buildin.patch -bugfix/all/macvtap-zerocopy-fix-truesize-underestimation.patch -bugfix/all/macvtap-zerocopy-put-page-when-fail-to-get-all-reque.patch -bugfix/all/macvtap-zerocopy-set-SKBTX_DEV_ZEROCOPY-only-when-sk.patch -bugfix/all/macvtap-zerocopy-validate-vectors-before-building-sk.patch - -bugfix/all/KVM-Fix-buffer-overflow-in-kvm_set_irq.patch -bugfix/all/ethtool-allow-ETHTOOL_GSSET_INFO-for-users.patch - -# CPU sysdev removal from 3.3 and x86 CPU auto-loading from 3.4 -features/all/cpu-devices/driver-core-implement-sysdev-functionality-for-regul.patch -features/all/cpu-devices/cpu-convert-cpu-and-machinecheck-sysdev_class-to-a-r.patch -features/all/cpu-devices/topology-Provide-CPU-topology-in-sysfs-in-SMP-configura.patch -features/all/cpu-devices/cpu-Do-not-return-errors-from-cpu_dev_init-which-wil.patch -features/all/cpu-devices/cpu-Register-a-generic-CPU-device-on-architectures-t.patch -features/all/cpu-devices/x86-mce-Fix-CPU-hotplug-and-suspend-regression-relat.patch -features/all/cpu-devices/mce-fix-warning-messages-about-static-struct-mce_dev.patch -features/all/cpu-devices/x86-mce-Convert-static-array-of-pointers-to-per-cpu-.patch -features/all/cpu-devices/Add-driver-auto-probing-for-x86-features-v4.patch -features/all/cpu-devices/CPU-Introduce-ARCH_HAS_CPU_AUTOPROBE-and-X86-parts.patch -features/all/cpu-devices/driver-core-cpu-remove-kernel-warning-when-removing-.patch -features/all/cpu-devices/driver-core-cpu-fix-kobject-warning-when-hotplugging.patch -features/all/cpu-devices/crypto-Add-support-for-x86-cpuid-auto-loading-for-x8.patch -features/all/cpu-devices/intel-idle-convert-to-x86_cpu_id-auto-probing.patch -features/all/cpu-devices/ACPI-Load-acpi-cpufreq-from-processor-driver-automat.patch -features/all/cpu-devices/HWMON-Convert-via-cputemp-to-x86-cpuid-autoprobing.patch -features/all/cpu-devices/HWMON-Convert-coretemp-to-x86-cpuid-autoprobing.patch -features/all/cpu-devices/X86-Introduce-HW-Pstate-scattered-cpuid-feature.patch -features/all/cpu-devices/cpufreq-Add-support-for-x86-cpuinfo-auto-loading-v4.patch -features/all/cpu-devices/x86-cpu-Fix-overrun-check-in-arch_print_cpu_modalias.patch -features/all/cpu-devices/x86-cpu-Clean-up-modalias-feature-matching.patch -features/all/cpu-devices/intel_idle-Fix-ID-for-Nehalem-EX-Xeon-in-device-ID-t.patch -features/all/cpu-devices/powernow-k7-Fix-CPU-family-number.patch -features/all/cpu-devices/powernow-k6-Really-enable-auto-loading.patch -features/all/cpu-devices/intel_idle-Revert-change-of-auto_demotion_disable_fl.patch -features/all/cpu-devices/Partially-revert-cpufreq-Add-support-for-x86-cpuinfo.patch - -features/arm/kirkwood-add-dreamplug-fdt-support.patch -features/arm/kirkwood-fdt-convert-uart0-to-devicetree.patch -features/arm/kirkwood-fdt-use-mrvl-ticker-symbol.patch -features/arm/kirkwood-fdt-absorb-kirkwood_init.patch -features/arm/kirkwood-fdt-facilitate-new-boards-during-fdt-migration.patch -features/arm/kirkwood-fdt-define-uart01-as-disabled.patch -features/arm/kirkwood-rtc-mv-devicetree-bindings.patch -features/arm/kirkwood-use-devicetree-for-rtc-mv.patch -features/arm/kirkwood_add_missing_kexec_h.patch -features/arm/kirkwood-fix-orion_gpio_set_blink.patch -features/arm/kirkwood-create-a-generic-function-for-gpio-led-blinking.patch -features/arm/kirkwood-add-configuration-for-mpp12-as-gpio.patch -features/arm/kirkwood-add-iconnect-support.patch - -features/all/Input-add-Synaptics-USB-device-driver.patch +rpi-bootc-20120624.patch diff -Nru linux-3.2.21/debian/patches/series-rt linux-3.2.21/debian/patches/series-rt --- linux-3.2.21/debian/patches/series-rt 2012-06-15 03:44:04.000000000 +0100 +++ linux-3.2.21/debian/patches/series-rt 2012-06-24 23:20:26.000000000 +0100 @@ -69,7 +69,6 @@ features/all/rt/0069-wait-Provide-__wake_up_all_locked.patch features/all/rt/0070-pci-Use-__wake_up_all_locked-pci_unblock_user_cfg_ac.patch features/all/rt/0071-latency-hist.patch.patch -features/all/rt/0072-hwlatdetect.patch.patch features/all/rt/0074-early-printk-consolidate.patch.patch features/all/rt/0075-printk-kill.patch.patch features/all/rt/0076-printk-force_early_printk-boot-param-to-help-with-de.patch @@ -244,7 +243,6 @@ features/all/rt/0245-add-sys-kernel-realtime-entry.patch features/all/rt/0246-mm-rt-kmap_atomic-scheduling.patch features/all/rt/0247-ipc-sem-Rework-semaphore-wakeups.patch -features/all/rt/0248-sysrq-Allow-immediate-Magic-SysRq-output-for-PREEMPT.patch features/all/rt/0249-x86-kvm-require-const-tsc-for-rt.patch.patch features/all/rt/0250-scsi-fcoe-rt-aware.patch.patch features/all/rt/0251-x86-crypto-Reduce-preempt-disabled-regions.patch diff -Nru linux-3.2.21/debian/rules.gen linux-3.2.21/debian/rules.gen --- linux-3.2.21/debian/rules.gen 2012-06-22 13:54:27.000000000 +0100 +++ linux-3.2.21/debian/rules.gen 2012-06-24 23:21:09.000000000 +0100 @@ -4,561 +4,549 @@ binary-arch_alpha_none: binary-arch_alpha_none_alpha-generic binary-arch_alpha_none_alpha-legacy binary-arch_alpha_none_alpha-smp binary-arch_alpha_none_real binary-arch_alpha_none_alpha-generic: binary-arch_alpha_none_alpha-generic_real binary-arch_alpha_none_alpha-generic_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_alpha_none_alpha-legacy: binary-arch_alpha_none_alpha-legacy_real binary-arch_alpha_none_alpha-legacy_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-legacy' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-legacy' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-legacy' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-legacy' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-legacy' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-legacy' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-legacy' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-legacy' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_alpha_none_alpha-smp: binary-arch_alpha_none_alpha-smp_real binary-arch_alpha_none_alpha-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_alpha_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' FEATURESET='none' KERNEL_ARCH='alpha' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' FEATURESET='none' KERNEL_ARCH='alpha' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_alpha_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' KERNEL_ARCH='alpha' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' KERNEL_ARCH='alpha' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_amd64:: binary-arch_amd64_none binary-arch_amd64_real binary-arch_amd64_rt binary-arch_amd64:: - $(MAKE) -f debian/rules.real install-udeb_amd64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-amd64-di nic-modules-3.2.0-3-amd64-di nic-extra-modules-3.2.0-3-amd64-di nic-wireless-modules-3.2.0-3-amd64-di nic-shared-modules-3.2.0-3-amd64-di serial-modules-3.2.0-3-amd64-di usb-serial-modules-3.2.0-3-amd64-di ppp-modules-3.2.0-3-amd64-di pata-modules-3.2.0-3-amd64-di cdrom-core-modules-3.2.0-3-amd64-di firewire-core-modules-3.2.0-3-amd64-di scsi-core-modules-3.2.0-3-amd64-di scsi-modules-3.2.0-3-amd64-di scsi-common-modules-3.2.0-3-amd64-di scsi-extra-modules-3.2.0-3-amd64-di plip-modules-3.2.0-3-amd64-di floppy-modules-3.2.0-3-amd64-di loop-modules-3.2.0-3-amd64-di btrfs-modules-3.2.0-3-amd64-di ext2-modules-3.2.0-3-amd64-di ext3-modules-3.2.0-3-amd64-di ext4-modules-3.2.0-3-amd64-di isofs-modules-3.2.0-3-amd64-di jfs-modules-3.2.0-3-amd64-di ntfs-modules-3.2.0-3-amd64-di reiserfs-modules-3.2.0-3-amd64-di xfs-modules-3.2.0-3-amd64-di fat-modules-3.2.0-3-amd64-di ufs-modules-3.2.0-3-amd64-di qnx4-modules-3.2.0-3-amd64-di md-modules-3.2.0-3-amd64-di multipath-modules-3.2.0-3-amd64-di usb-modules-3.2.0-3-amd64-di usb-storage-modules-3.2.0-3-amd64-di pcmcia-storage-modules-3.2.0-3-amd64-di fb-modules-3.2.0-3-amd64-di input-modules-3.2.0-3-amd64-di event-modules-3.2.0-3-amd64-di mouse-modules-3.2.0-3-amd64-di irda-modules-3.2.0-3-amd64-di parport-modules-3.2.0-3-amd64-di nic-pcmcia-modules-3.2.0-3-amd64-di pcmcia-modules-3.2.0-3-amd64-di nic-usb-modules-3.2.0-3-amd64-di sata-modules-3.2.0-3-amd64-di core-modules-3.2.0-3-amd64-di acpi-modules-3.2.0-3-amd64-di i2c-modules-3.2.0-3-amd64-di crc-modules-3.2.0-3-amd64-di crypto-modules-3.2.0-3-amd64-di crypto-dm-modules-3.2.0-3-amd64-di efi-modules-3.2.0-3-amd64-di ata-modules-3.2.0-3-amd64-di mmc-core-modules-3.2.0-3-amd64-di mmc-modules-3.2.0-3-amd64-di nbd-modules-3.2.0-3-amd64-di squashfs-modules-3.2.0-3-amd64-di speakup-modules-3.2.0-3-amd64-di virtio-modules-3.2.0-3-amd64-di uinput-modules-3.2.0-3-amd64-di sound-modules-3.2.0-3-amd64-di zlib-modules-3.2.0-3-amd64-di hyperv-modules-3.2.0-3-amd64-di udf-modules-3.2.0-3-amd64-di' + $(MAKE) -f debian/rules.real install-udeb_amd64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-amd64-di nic-modules-3.2.0-3-amd64-di nic-extra-modules-3.2.0-3-amd64-di nic-wireless-modules-3.2.0-3-amd64-di nic-shared-modules-3.2.0-3-amd64-di serial-modules-3.2.0-3-amd64-di usb-serial-modules-3.2.0-3-amd64-di ppp-modules-3.2.0-3-amd64-di pata-modules-3.2.0-3-amd64-di cdrom-core-modules-3.2.0-3-amd64-di firewire-core-modules-3.2.0-3-amd64-di scsi-core-modules-3.2.0-3-amd64-di scsi-modules-3.2.0-3-amd64-di scsi-common-modules-3.2.0-3-amd64-di scsi-extra-modules-3.2.0-3-amd64-di plip-modules-3.2.0-3-amd64-di floppy-modules-3.2.0-3-amd64-di loop-modules-3.2.0-3-amd64-di btrfs-modules-3.2.0-3-amd64-di ext2-modules-3.2.0-3-amd64-di ext3-modules-3.2.0-3-amd64-di ext4-modules-3.2.0-3-amd64-di isofs-modules-3.2.0-3-amd64-di jfs-modules-3.2.0-3-amd64-di ntfs-modules-3.2.0-3-amd64-di reiserfs-modules-3.2.0-3-amd64-di xfs-modules-3.2.0-3-amd64-di fat-modules-3.2.0-3-amd64-di ufs-modules-3.2.0-3-amd64-di qnx4-modules-3.2.0-3-amd64-di md-modules-3.2.0-3-amd64-di multipath-modules-3.2.0-3-amd64-di usb-modules-3.2.0-3-amd64-di usb-storage-modules-3.2.0-3-amd64-di pcmcia-storage-modules-3.2.0-3-amd64-di fb-modules-3.2.0-3-amd64-di input-modules-3.2.0-3-amd64-di event-modules-3.2.0-3-amd64-di mouse-modules-3.2.0-3-amd64-di irda-modules-3.2.0-3-amd64-di parport-modules-3.2.0-3-amd64-di nic-pcmcia-modules-3.2.0-3-amd64-di pcmcia-modules-3.2.0-3-amd64-di nic-usb-modules-3.2.0-3-amd64-di sata-modules-3.2.0-3-amd64-di core-modules-3.2.0-3-amd64-di acpi-modules-3.2.0-3-amd64-di i2c-modules-3.2.0-3-amd64-di crc-modules-3.2.0-3-amd64-di crypto-modules-3.2.0-3-amd64-di crypto-dm-modules-3.2.0-3-amd64-di efi-modules-3.2.0-3-amd64-di ata-modules-3.2.0-3-amd64-di mmc-core-modules-3.2.0-3-amd64-di mmc-modules-3.2.0-3-amd64-di nbd-modules-3.2.0-3-amd64-di squashfs-modules-3.2.0-3-amd64-di speakup-modules-3.2.0-3-amd64-di virtio-modules-3.2.0-3-amd64-di uinput-modules-3.2.0-3-amd64-di sound-modules-3.2.0-3-amd64-di zlib-modules-3.2.0-3-amd64-di hyperv-modules-3.2.0-3-amd64-di udf-modules-3.2.0-3-amd64-di' binary-arch_amd64_none: binary-arch_amd64_none_amd64 binary-arch_amd64_none_real binary-arch_amd64_none_amd64: binary-arch_amd64_none_amd64_real binary-arch_amd64_none_amd64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' - $(MAKE) -f debian/rules.real install-dummy DH_OPTIONS='-pxen-linux-system-3.2.0-3-amd64' ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-dummy DH_OPTIONS='-pxen-linux-system-3.2.0-3-amd64' ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_amd64_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' FEATURESET='none' KERNEL_ARCH='x86' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' FEATURESET='none' KERNEL_ARCH='x86' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_amd64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_amd64_rt: binary-arch_amd64_rt_amd64 binary-arch_amd64_rt_real binary-arch_amd64_rt_amd64: binary-arch_amd64_rt_amd64_real binary-arch_amd64_rt_amd64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64 debian/config/featureset-rt/config' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64 debian/config/featureset-rt/config' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_amd64_rt_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' FEATURESET='rt' KERNEL_ARCH='x86' LOCALVERSION_HEADERS='-rt' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' FEATURESET='rt' KERNEL_ARCH='x86' LOCALVERSION_HEADERS='-rt' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armel:: binary-arch_armel_none binary-arch_armel_real binary-arch_armel:: - $(MAKE) -f debian/rules.real install-udeb_armel ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-iop32x-di nic-modules-3.2.0-3-iop32x-di nic-shared-modules-3.2.0-3-iop32x-di usb-serial-modules-3.2.0-3-iop32x-di ppp-modules-3.2.0-3-iop32x-di pata-modules-3.2.0-3-iop32x-di cdrom-core-modules-3.2.0-3-iop32x-di scsi-core-modules-3.2.0-3-iop32x-di loop-modules-3.2.0-3-iop32x-di ipv6-modules-3.2.0-3-iop32x-di btrfs-modules-3.2.0-3-iop32x-di ext2-modules-3.2.0-3-iop32x-di ext3-modules-3.2.0-3-iop32x-di ext4-modules-3.2.0-3-iop32x-di isofs-modules-3.2.0-3-iop32x-di jffs2-modules-3.2.0-3-iop32x-di jfs-modules-3.2.0-3-iop32x-di reiserfs-modules-3.2.0-3-iop32x-di fat-modules-3.2.0-3-iop32x-di md-modules-3.2.0-3-iop32x-di multipath-modules-3.2.0-3-iop32x-di usb-modules-3.2.0-3-iop32x-di usb-storage-modules-3.2.0-3-iop32x-di event-modules-3.2.0-3-iop32x-di nic-usb-modules-3.2.0-3-iop32x-di sata-modules-3.2.0-3-iop32x-di core-modules-3.2.0-3-iop32x-di crc-modules-3.2.0-3-iop32x-di crypto-modules-3.2.0-3-iop32x-di crypto-dm-modules-3.2.0-3-iop32x-di ata-modules-3.2.0-3-iop32x-di nbd-modules-3.2.0-3-iop32x-di squashfs-modules-3.2.0-3-iop32x-di zlib-modules-3.2.0-3-iop32x-di udf-modules-3.2.0-3-iop32x-di kernel-image-3.2.0-3-kirkwood-di nic-modules-3.2.0-3-kirkwood-di nic-shared-modules-3.2.0-3-kirkwood-di usb-serial-modules-3.2.0-3-kirkwood-di ppp-modules-3.2.0-3-kirkwood-di cdrom-core-modules-3.2.0-3-kirkwood-di scsi-core-modules-3.2.0-3-kirkwood-di loop-modules-3.2.0-3-kirkwood-di ipv6-modules-3.2.0-3-kirkwood-di btrfs-modules-3.2.0-3-kirkwood-di ext2-modules-3.2.0-3-kirkwood-di ext3-modules-3.2.0-3-kirkwood-di ext4-modules-3.2.0-3-kirkwood-di isofs-modules-3.2.0-3-kirkwood-di jfs-modules-3.2.0-3-kirkwood-di reiserfs-modules-3.2.0-3-kirkwood-di fat-modules-3.2.0-3-kirkwood-di minix-modules-3.2.0-3-kirkwood-di md-modules-3.2.0-3-kirkwood-di multipath-modules-3.2.0-3-kirkwood-di usb-modules-3.2.0-3-kirkwood-di usb-storage-modules-3.2.0-3-kirkwood-di fb-modules-3.2.0-3-kirkwood-di input-modules-3.2.0-3-kirkwood-di event-modules-3.2.0-3-kirkwood-di mouse-modules-3.2.0-3-kirkwood-di nic-usb-modules-3.2.0-3-kirkwood-di sata-modules-3.2.0-3-kirkwood-di core-modules-3.2.0-3-kirkwood-di crc-modules-3.2.0-3-kirkwood-di crypto-modules-3.2.0-3-kirkwood-di crypto-dm-modules-3.2.0-3-kirkwood-di mmc-modules-3.2.0-3-kirkwood-di nbd-modules-3.2.0-3-kirkwood-di squashfs-modules-3.2.0-3-kirkwood-di uinput-modules-3.2.0-3-kirkwood-di leds-modules-3.2.0-3-kirkwood-di udf-modules-3.2.0-3-kirkwood-di kernel-image-3.2.0-3-orion5x-di nic-modules-3.2.0-3-orion5x-di nic-shared-modules-3.2.0-3-orion5x-di usb-serial-modules-3.2.0-3-orion5x-di ppp-modules-3.2.0-3-orion5x-di cdrom-core-modules-3.2.0-3-orion5x-di scsi-core-modules-3.2.0-3-orion5x-di loop-modules-3.2.0-3-orion5x-di ipv6-modules-3.2.0-3-orion5x-di btrfs-modules-3.2.0-3-orion5x-di ext2-modules-3.2.0-3-orion5x-di ext3-modules-3.2.0-3-orion5x-di ext4-modules-3.2.0-3-orion5x-di isofs-modules-3.2.0-3-orion5x-di jffs2-modules-3.2.0-3-orion5x-di jfs-modules-3.2.0-3-orion5x-di reiserfs-modules-3.2.0-3-orion5x-di fat-modules-3.2.0-3-orion5x-di minix-modules-3.2.0-3-orion5x-di md-modules-3.2.0-3-orion5x-di multipath-modules-3.2.0-3-orion5x-di usb-modules-3.2.0-3-orion5x-di usb-storage-modules-3.2.0-3-orion5x-di event-modules-3.2.0-3-orion5x-di nic-usb-modules-3.2.0-3-orion5x-di sata-modules-3.2.0-3-orion5x-di core-modules-3.2.0-3-orion5x-di crc-modules-3.2.0-3-orion5x-di crypto-modules-3.2.0-3-orion5x-di crypto-dm-modules-3.2.0-3-orion5x-di nbd-modules-3.2.0-3-orion5x-di squashfs-modules-3.2.0-3-orion5x-di zlib-modules-3.2.0-3-orion5x-di udf-modules-3.2.0-3-orion5x-di kernel-image-3.2.0-3-versatile-di nic-modules-3.2.0-3-versatile-di nic-shared-modules-3.2.0-3-versatile-di usb-serial-modules-3.2.0-3-versatile-di ppp-modules-3.2.0-3-versatile-di cdrom-core-modules-3.2.0-3-versatile-di scsi-core-modules-3.2.0-3-versatile-di scsi-common-modules-3.2.0-3-versatile-di loop-modules-3.2.0-3-versatile-di ipv6-modules-3.2.0-3-versatile-di btrfs-modules-3.2.0-3-versatile-di ext2-modules-3.2.0-3-versatile-di ext3-modules-3.2.0-3-versatile-di ext4-modules-3.2.0-3-versatile-di isofs-modules-3.2.0-3-versatile-di reiserfs-modules-3.2.0-3-versatile-di fat-modules-3.2.0-3-versatile-di md-modules-3.2.0-3-versatile-di multipath-modules-3.2.0-3-versatile-di usb-modules-3.2.0-3-versatile-di usb-storage-modules-3.2.0-3-versatile-di nic-usb-modules-3.2.0-3-versatile-di sata-modules-3.2.0-3-versatile-di core-modules-3.2.0-3-versatile-di crc-modules-3.2.0-3-versatile-di crypto-modules-3.2.0-3-versatile-di crypto-dm-modules-3.2.0-3-versatile-di nbd-modules-3.2.0-3-versatile-di squashfs-modules-3.2.0-3-versatile-di virtio-modules-3.2.0-3-versatile-di zlib-modules-3.2.0-3-versatile-di udf-modules-3.2.0-3-versatile-di' + $(MAKE) -f debian/rules.real install-udeb_armel ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-iop32x-di nic-modules-3.2.0-3-iop32x-di nic-shared-modules-3.2.0-3-iop32x-di usb-serial-modules-3.2.0-3-iop32x-di ppp-modules-3.2.0-3-iop32x-di pata-modules-3.2.0-3-iop32x-di cdrom-core-modules-3.2.0-3-iop32x-di scsi-core-modules-3.2.0-3-iop32x-di loop-modules-3.2.0-3-iop32x-di ipv6-modules-3.2.0-3-iop32x-di btrfs-modules-3.2.0-3-iop32x-di ext2-modules-3.2.0-3-iop32x-di ext3-modules-3.2.0-3-iop32x-di ext4-modules-3.2.0-3-iop32x-di isofs-modules-3.2.0-3-iop32x-di jffs2-modules-3.2.0-3-iop32x-di jfs-modules-3.2.0-3-iop32x-di reiserfs-modules-3.2.0-3-iop32x-di fat-modules-3.2.0-3-iop32x-di md-modules-3.2.0-3-iop32x-di multipath-modules-3.2.0-3-iop32x-di usb-modules-3.2.0-3-iop32x-di usb-storage-modules-3.2.0-3-iop32x-di event-modules-3.2.0-3-iop32x-di nic-usb-modules-3.2.0-3-iop32x-di sata-modules-3.2.0-3-iop32x-di core-modules-3.2.0-3-iop32x-di crc-modules-3.2.0-3-iop32x-di crypto-modules-3.2.0-3-iop32x-di crypto-dm-modules-3.2.0-3-iop32x-di ata-modules-3.2.0-3-iop32x-di nbd-modules-3.2.0-3-iop32x-di squashfs-modules-3.2.0-3-iop32x-di zlib-modules-3.2.0-3-iop32x-di udf-modules-3.2.0-3-iop32x-di kernel-image-3.2.0-3-kirkwood-di nic-modules-3.2.0-3-kirkwood-di nic-shared-modules-3.2.0-3-kirkwood-di usb-serial-modules-3.2.0-3-kirkwood-di ppp-modules-3.2.0-3-kirkwood-di cdrom-core-modules-3.2.0-3-kirkwood-di scsi-core-modules-3.2.0-3-kirkwood-di loop-modules-3.2.0-3-kirkwood-di ipv6-modules-3.2.0-3-kirkwood-di btrfs-modules-3.2.0-3-kirkwood-di ext2-modules-3.2.0-3-kirkwood-di ext3-modules-3.2.0-3-kirkwood-di ext4-modules-3.2.0-3-kirkwood-di isofs-modules-3.2.0-3-kirkwood-di jfs-modules-3.2.0-3-kirkwood-di reiserfs-modules-3.2.0-3-kirkwood-di fat-modules-3.2.0-3-kirkwood-di minix-modules-3.2.0-3-kirkwood-di md-modules-3.2.0-3-kirkwood-di multipath-modules-3.2.0-3-kirkwood-di usb-modules-3.2.0-3-kirkwood-di usb-storage-modules-3.2.0-3-kirkwood-di fb-modules-3.2.0-3-kirkwood-di input-modules-3.2.0-3-kirkwood-di event-modules-3.2.0-3-kirkwood-di mouse-modules-3.2.0-3-kirkwood-di nic-usb-modules-3.2.0-3-kirkwood-di sata-modules-3.2.0-3-kirkwood-di core-modules-3.2.0-3-kirkwood-di crc-modules-3.2.0-3-kirkwood-di crypto-modules-3.2.0-3-kirkwood-di crypto-dm-modules-3.2.0-3-kirkwood-di mmc-modules-3.2.0-3-kirkwood-di nbd-modules-3.2.0-3-kirkwood-di squashfs-modules-3.2.0-3-kirkwood-di uinput-modules-3.2.0-3-kirkwood-di leds-modules-3.2.0-3-kirkwood-di udf-modules-3.2.0-3-kirkwood-di kernel-image-3.2.0-3-orion5x-di nic-modules-3.2.0-3-orion5x-di nic-shared-modules-3.2.0-3-orion5x-di usb-serial-modules-3.2.0-3-orion5x-di ppp-modules-3.2.0-3-orion5x-di cdrom-core-modules-3.2.0-3-orion5x-di scsi-core-modules-3.2.0-3-orion5x-di loop-modules-3.2.0-3-orion5x-di ipv6-modules-3.2.0-3-orion5x-di btrfs-modules-3.2.0-3-orion5x-di ext2-modules-3.2.0-3-orion5x-di ext3-modules-3.2.0-3-orion5x-di ext4-modules-3.2.0-3-orion5x-di isofs-modules-3.2.0-3-orion5x-di jffs2-modules-3.2.0-3-orion5x-di jfs-modules-3.2.0-3-orion5x-di reiserfs-modules-3.2.0-3-orion5x-di fat-modules-3.2.0-3-orion5x-di minix-modules-3.2.0-3-orion5x-di md-modules-3.2.0-3-orion5x-di multipath-modules-3.2.0-3-orion5x-di usb-modules-3.2.0-3-orion5x-di usb-storage-modules-3.2.0-3-orion5x-di event-modules-3.2.0-3-orion5x-di nic-usb-modules-3.2.0-3-orion5x-di sata-modules-3.2.0-3-orion5x-di core-modules-3.2.0-3-orion5x-di crc-modules-3.2.0-3-orion5x-di crypto-modules-3.2.0-3-orion5x-di crypto-dm-modules-3.2.0-3-orion5x-di nbd-modules-3.2.0-3-orion5x-di squashfs-modules-3.2.0-3-orion5x-di zlib-modules-3.2.0-3-orion5x-di udf-modules-3.2.0-3-orion5x-di kernel-image-3.2.0-3-versatile-di nic-modules-3.2.0-3-versatile-di nic-shared-modules-3.2.0-3-versatile-di usb-serial-modules-3.2.0-3-versatile-di ppp-modules-3.2.0-3-versatile-di cdrom-core-modules-3.2.0-3-versatile-di scsi-core-modules-3.2.0-3-versatile-di scsi-common-modules-3.2.0-3-versatile-di loop-modules-3.2.0-3-versatile-di ipv6-modules-3.2.0-3-versatile-di btrfs-modules-3.2.0-3-versatile-di ext2-modules-3.2.0-3-versatile-di ext3-modules-3.2.0-3-versatile-di ext4-modules-3.2.0-3-versatile-di isofs-modules-3.2.0-3-versatile-di reiserfs-modules-3.2.0-3-versatile-di fat-modules-3.2.0-3-versatile-di md-modules-3.2.0-3-versatile-di multipath-modules-3.2.0-3-versatile-di usb-modules-3.2.0-3-versatile-di usb-storage-modules-3.2.0-3-versatile-di nic-usb-modules-3.2.0-3-versatile-di sata-modules-3.2.0-3-versatile-di core-modules-3.2.0-3-versatile-di crc-modules-3.2.0-3-versatile-di crypto-modules-3.2.0-3-versatile-di crypto-dm-modules-3.2.0-3-versatile-di nbd-modules-3.2.0-3-versatile-di squashfs-modules-3.2.0-3-versatile-di virtio-modules-3.2.0-3-versatile-di zlib-modules-3.2.0-3-versatile-di udf-modules-3.2.0-3-versatile-di' binary-arch_armel_none: binary-arch_armel_none_iop32x binary-arch_armel_none_ixp4xx binary-arch_armel_none_kirkwood binary-arch_armel_none_mv78xx0 binary-arch_armel_none_orion5x binary-arch_armel_none_real binary-arch_armel_none_versatile binary-arch_armel_none_iop32x: binary-arch_armel_none_iop32x_real binary-arch_armel_none_iop32x_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='iop32x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.iop32x' KERNEL_ARCH='arm' LOCALVERSION='-iop32x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-iop32x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='iop32x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.iop32x' KERNEL_ARCH='arm' LOCALVERSION='-iop32x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-iop32x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armel_none_ixp4xx: binary-arch_armel_none_ixp4xx_real binary-arch_armel_none_ixp4xx_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='ixp4xx' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.ixp4xx' KERNEL_ARCH='arm' LOCALVERSION='-ixp4xx' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-ixp4xx' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='ixp4xx' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.ixp4xx' KERNEL_ARCH='arm' LOCALVERSION='-ixp4xx' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-ixp4xx' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armel_none_kirkwood: binary-arch_armel_none_kirkwood_real binary-arch_armel_none_kirkwood_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='kirkwood' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.kirkwood' KERNEL_ARCH='arm' LOCALVERSION='-kirkwood' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-kirkwood' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='kirkwood' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.kirkwood' KERNEL_ARCH='arm' LOCALVERSION='-kirkwood' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-kirkwood' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armel_none_mv78xx0: binary-arch_armel_none_mv78xx0_real binary-arch_armel_none_mv78xx0_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mv78xx0' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.mv78xx0' KERNEL_ARCH='arm' LOCALVERSION='-mv78xx0' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mv78xx0' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mv78xx0' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.mv78xx0' KERNEL_ARCH='arm' LOCALVERSION='-mv78xx0' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mv78xx0' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armel_none_orion5x: binary-arch_armel_none_orion5x_real binary-arch_armel_none_orion5x_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='orion5x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.orion5x' KERNEL_ARCH='arm' LOCALVERSION='-orion5x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-orion5x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='orion5x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.orion5x' KERNEL_ARCH='arm' LOCALVERSION='-orion5x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-orion5x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armel_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' FEATURESET='none' KERNEL_ARCH='arm' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' FEATURESET='none' KERNEL_ARCH='arm' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armel_none_versatile: binary-arch_armel_none_versatile_real binary-arch_armel_none_versatile_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='versatile' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.versatile' KERNEL_ARCH='arm' LOCALVERSION='-versatile' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-versatile' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='versatile' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.versatile' KERNEL_ARCH='arm' LOCALVERSION='-versatile' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-versatile' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armel_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armhf:: binary-arch_armhf_none binary-arch_armhf_real binary-arch_armhf:: - $(MAKE) -f debian/rules.real install-udeb_armhf ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-mx5-di nic-modules-3.2.0-3-mx5-di nic-shared-modules-3.2.0-3-mx5-di scsi-core-modules-3.2.0-3-mx5-di loop-modules-3.2.0-3-mx5-di ipv6-modules-3.2.0-3-mx5-di btrfs-modules-3.2.0-3-mx5-di ext2-modules-3.2.0-3-mx5-di ext3-modules-3.2.0-3-mx5-di ext4-modules-3.2.0-3-mx5-di isofs-modules-3.2.0-3-mx5-di jfs-modules-3.2.0-3-mx5-di reiserfs-modules-3.2.0-3-mx5-di fat-modules-3.2.0-3-mx5-di minix-modules-3.2.0-3-mx5-di md-modules-3.2.0-3-mx5-di multipath-modules-3.2.0-3-mx5-di usb-storage-modules-3.2.0-3-mx5-di input-modules-3.2.0-3-mx5-di nic-usb-modules-3.2.0-3-mx5-di core-modules-3.2.0-3-mx5-di crc-modules-3.2.0-3-mx5-di crypto-modules-3.2.0-3-mx5-di crypto-dm-modules-3.2.0-3-mx5-di mmc-modules-3.2.0-3-mx5-di nbd-modules-3.2.0-3-mx5-di squashfs-modules-3.2.0-3-mx5-di uinput-modules-3.2.0-3-mx5-di udf-modules-3.2.0-3-mx5-di' -binary-arch_armhf_none: binary-arch_armhf_none_mx5 binary-arch_armhf_none_omap binary-arch_armhf_none_real binary-arch_armhf_none_vexpress -binary-arch_armhf_none_mx5: binary-arch_armhf_none_mx5_real -binary-arch_armhf_none_mx5_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mx5' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.mx5' KERNEL_ARCH='arm' LOCALVERSION='-mx5' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mx5' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' -binary-arch_armhf_none_omap: binary-arch_armhf_none_omap_real -binary-arch_armhf_none_omap_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='omap' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.omap' KERNEL_ARCH='arm' LOCALVERSION='-omap' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-omap' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-udeb_armhf ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-rpi-di nic-modules-3.2.0-3-rpi-di scsi-core-modules-3.2.0-3-rpi-di loop-modules-3.2.0-3-rpi-di btrfs-modules-3.2.0-3-rpi-di ext2-modules-3.2.0-3-rpi-di ext3-modules-3.2.0-3-rpi-di isofs-modules-3.2.0-3-rpi-di jfs-modules-3.2.0-3-rpi-di reiserfs-modules-3.2.0-3-rpi-di fat-modules-3.2.0-3-rpi-di minix-modules-3.2.0-3-rpi-di md-modules-3.2.0-3-rpi-di multipath-modules-3.2.0-3-rpi-di usb-storage-modules-3.2.0-3-rpi-di input-modules-3.2.0-3-rpi-di nic-usb-modules-3.2.0-3-rpi-di crc-modules-3.2.0-3-rpi-di crypto-modules-3.2.0-3-rpi-di crypto-dm-modules-3.2.0-3-rpi-di nbd-modules-3.2.0-3-rpi-di squashfs-modules-3.2.0-3-rpi-di uinput-modules-3.2.0-3-rpi-di' +binary-arch_armhf_none: binary-arch_armhf_none_real binary-arch_armhf_none_rpi binary-arch_armhf_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' FEATURESET='none' KERNEL_ARCH='arm' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' -binary-arch_armhf_none_vexpress: binary-arch_armhf_none_vexpress_real -binary-arch_armhf_none_vexpress_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='vexpress' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.vexpress' KERNEL_ARCH='arm' LOCALVERSION='-vexpress' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-vexpress' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' FEATURESET='none' KERNEL_ARCH='arm' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' +binary-arch_armhf_none_rpi: binary-arch_armhf_none_rpi_real +binary-arch_armhf_none_rpi_real:: + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='rpi' INITRAMFS='False' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.rpi' KERNEL_ARCH='arm' LOCALVERSION='-rpi' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_armhf_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_hppa:: binary-arch_hppa_none binary-arch_hppa_real binary-arch_hppa:: - $(MAKE) -f debian/rules.real install-udeb_hppa ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-parisc-di nic-modules-3.2.0-3-parisc-di ppp-modules-3.2.0-3-parisc-di pata-modules-3.2.0-3-parisc-di cdrom-core-modules-3.2.0-3-parisc-di scsi-core-modules-3.2.0-3-parisc-di scsi-modules-3.2.0-3-parisc-di loop-modules-3.2.0-3-parisc-di ipv6-modules-3.2.0-3-parisc-di btrfs-modules-3.2.0-3-parisc-di ext3-modules-3.2.0-3-parisc-di ext4-modules-3.2.0-3-parisc-di fat-modules-3.2.0-3-parisc-di md-modules-3.2.0-3-parisc-di multipath-modules-3.2.0-3-parisc-di usb-modules-3.2.0-3-parisc-di usb-storage-modules-3.2.0-3-parisc-di input-modules-3.2.0-3-parisc-di crypto-modules-3.2.0-3-parisc-di crypto-dm-modules-3.2.0-3-parisc-di nbd-modules-3.2.0-3-parisc-di zlib-modules-3.2.0-3-parisc-di kernel-image-3.2.0-3-parisc64-di nic-modules-3.2.0-3-parisc64-di ppp-modules-3.2.0-3-parisc64-di pata-modules-3.2.0-3-parisc64-di cdrom-core-modules-3.2.0-3-parisc64-di scsi-core-modules-3.2.0-3-parisc64-di scsi-modules-3.2.0-3-parisc64-di loop-modules-3.2.0-3-parisc64-di ipv6-modules-3.2.0-3-parisc64-di btrfs-modules-3.2.0-3-parisc64-di ext3-modules-3.2.0-3-parisc64-di ext4-modules-3.2.0-3-parisc64-di fat-modules-3.2.0-3-parisc64-di md-modules-3.2.0-3-parisc64-di multipath-modules-3.2.0-3-parisc64-di usb-modules-3.2.0-3-parisc64-di usb-storage-modules-3.2.0-3-parisc64-di input-modules-3.2.0-3-parisc64-di crypto-modules-3.2.0-3-parisc64-di crypto-dm-modules-3.2.0-3-parisc64-di nbd-modules-3.2.0-3-parisc64-di zlib-modules-3.2.0-3-parisc64-di' + $(MAKE) -f debian/rules.real install-udeb_hppa ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-parisc-di nic-modules-3.2.0-3-parisc-di ppp-modules-3.2.0-3-parisc-di pata-modules-3.2.0-3-parisc-di cdrom-core-modules-3.2.0-3-parisc-di scsi-core-modules-3.2.0-3-parisc-di scsi-modules-3.2.0-3-parisc-di loop-modules-3.2.0-3-parisc-di ipv6-modules-3.2.0-3-parisc-di btrfs-modules-3.2.0-3-parisc-di ext3-modules-3.2.0-3-parisc-di ext4-modules-3.2.0-3-parisc-di fat-modules-3.2.0-3-parisc-di md-modules-3.2.0-3-parisc-di multipath-modules-3.2.0-3-parisc-di usb-modules-3.2.0-3-parisc-di usb-storage-modules-3.2.0-3-parisc-di input-modules-3.2.0-3-parisc-di crypto-modules-3.2.0-3-parisc-di crypto-dm-modules-3.2.0-3-parisc-di nbd-modules-3.2.0-3-parisc-di zlib-modules-3.2.0-3-parisc-di kernel-image-3.2.0-3-parisc64-di nic-modules-3.2.0-3-parisc64-di ppp-modules-3.2.0-3-parisc64-di pata-modules-3.2.0-3-parisc64-di cdrom-core-modules-3.2.0-3-parisc64-di scsi-core-modules-3.2.0-3-parisc64-di scsi-modules-3.2.0-3-parisc64-di loop-modules-3.2.0-3-parisc64-di ipv6-modules-3.2.0-3-parisc64-di btrfs-modules-3.2.0-3-parisc64-di ext3-modules-3.2.0-3-parisc64-di ext4-modules-3.2.0-3-parisc64-di fat-modules-3.2.0-3-parisc64-di md-modules-3.2.0-3-parisc64-di multipath-modules-3.2.0-3-parisc64-di usb-modules-3.2.0-3-parisc64-di usb-storage-modules-3.2.0-3-parisc64-di input-modules-3.2.0-3-parisc64-di crypto-modules-3.2.0-3-parisc64-di crypto-dm-modules-3.2.0-3-parisc64-di nbd-modules-3.2.0-3-parisc64-di zlib-modules-3.2.0-3-parisc64-di' binary-arch_hppa_none: binary-arch_hppa_none_parisc binary-arch_hppa_none_parisc-smp binary-arch_hppa_none_parisc64 binary-arch_hppa_none_parisc64-smp binary-arch_hppa_none_real binary-arch_hppa_none_parisc: binary-arch_hppa_none_parisc_real binary-arch_hppa_none_parisc-smp: binary-arch_hppa_none_parisc-smp_real binary-arch_hppa_none_parisc-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_hppa_none_parisc64: binary-arch_hppa_none_parisc64_real binary-arch_hppa_none_parisc64-smp: binary-arch_hppa_none_parisc64-smp_real binary-arch_hppa_none_parisc64-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_hppa_none_parisc64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_hppa_none_parisc_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_hppa_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' FEATURESET='none' KERNEL_ARCH='parisc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' FEATURESET='none' KERNEL_ARCH='parisc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_hppa_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_i386:: binary-arch_i386_none binary-arch_i386_real binary-arch_i386_rt binary-arch_i386:: - $(MAKE) -f debian/rules.real install-udeb_i386 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-486-di nic-modules-3.2.0-3-486-di nic-extra-modules-3.2.0-3-486-di nic-wireless-modules-3.2.0-3-486-di nic-shared-modules-3.2.0-3-486-di serial-modules-3.2.0-3-486-di usb-serial-modules-3.2.0-3-486-di ppp-modules-3.2.0-3-486-di pata-modules-3.2.0-3-486-di cdrom-core-modules-3.2.0-3-486-di firewire-core-modules-3.2.0-3-486-di scsi-core-modules-3.2.0-3-486-di scsi-modules-3.2.0-3-486-di scsi-common-modules-3.2.0-3-486-di scsi-extra-modules-3.2.0-3-486-di plip-modules-3.2.0-3-486-di floppy-modules-3.2.0-3-486-di loop-modules-3.2.0-3-486-di btrfs-modules-3.2.0-3-486-di ext2-modules-3.2.0-3-486-di ext3-modules-3.2.0-3-486-di ext4-modules-3.2.0-3-486-di isofs-modules-3.2.0-3-486-di jfs-modules-3.2.0-3-486-di ntfs-modules-3.2.0-3-486-di reiserfs-modules-3.2.0-3-486-di xfs-modules-3.2.0-3-486-di fat-modules-3.2.0-3-486-di ufs-modules-3.2.0-3-486-di qnx4-modules-3.2.0-3-486-di md-modules-3.2.0-3-486-di multipath-modules-3.2.0-3-486-di usb-modules-3.2.0-3-486-di usb-storage-modules-3.2.0-3-486-di pcmcia-storage-modules-3.2.0-3-486-di fb-modules-3.2.0-3-486-di input-modules-3.2.0-3-486-di event-modules-3.2.0-3-486-di mouse-modules-3.2.0-3-486-di irda-modules-3.2.0-3-486-di parport-modules-3.2.0-3-486-di nic-pcmcia-modules-3.2.0-3-486-di pcmcia-modules-3.2.0-3-486-di nic-usb-modules-3.2.0-3-486-di sata-modules-3.2.0-3-486-di core-modules-3.2.0-3-486-di acpi-modules-3.2.0-3-486-di i2c-modules-3.2.0-3-486-di crc-modules-3.2.0-3-486-di crypto-modules-3.2.0-3-486-di crypto-dm-modules-3.2.0-3-486-di efi-modules-3.2.0-3-486-di ata-modules-3.2.0-3-486-di mmc-core-modules-3.2.0-3-486-di mmc-modules-3.2.0-3-486-di nbd-modules-3.2.0-3-486-di squashfs-modules-3.2.0-3-486-di speakup-modules-3.2.0-3-486-di virtio-modules-3.2.0-3-486-di uinput-modules-3.2.0-3-486-di sound-modules-3.2.0-3-486-di zlib-modules-3.2.0-3-486-di hyperv-modules-3.2.0-3-486-di udf-modules-3.2.0-3-486-di kernel-image-3.2.0-3-686-pae-di nic-modules-3.2.0-3-686-pae-di nic-extra-modules-3.2.0-3-686-pae-di nic-wireless-modules-3.2.0-3-686-pae-di nic-shared-modules-3.2.0-3-686-pae-di serial-modules-3.2.0-3-686-pae-di usb-serial-modules-3.2.0-3-686-pae-di ppp-modules-3.2.0-3-686-pae-di pata-modules-3.2.0-3-686-pae-di cdrom-core-modules-3.2.0-3-686-pae-di firewire-core-modules-3.2.0-3-686-pae-di scsi-core-modules-3.2.0-3-686-pae-di scsi-modules-3.2.0-3-686-pae-di scsi-common-modules-3.2.0-3-686-pae-di scsi-extra-modules-3.2.0-3-686-pae-di plip-modules-3.2.0-3-686-pae-di floppy-modules-3.2.0-3-686-pae-di loop-modules-3.2.0-3-686-pae-di btrfs-modules-3.2.0-3-686-pae-di ext2-modules-3.2.0-3-686-pae-di ext3-modules-3.2.0-3-686-pae-di ext4-modules-3.2.0-3-686-pae-di isofs-modules-3.2.0-3-686-pae-di jfs-modules-3.2.0-3-686-pae-di ntfs-modules-3.2.0-3-686-pae-di reiserfs-modules-3.2.0-3-686-pae-di xfs-modules-3.2.0-3-686-pae-di fat-modules-3.2.0-3-686-pae-di ufs-modules-3.2.0-3-686-pae-di qnx4-modules-3.2.0-3-686-pae-di md-modules-3.2.0-3-686-pae-di multipath-modules-3.2.0-3-686-pae-di usb-modules-3.2.0-3-686-pae-di usb-storage-modules-3.2.0-3-686-pae-di pcmcia-storage-modules-3.2.0-3-686-pae-di fb-modules-3.2.0-3-686-pae-di input-modules-3.2.0-3-686-pae-di event-modules-3.2.0-3-686-pae-di mouse-modules-3.2.0-3-686-pae-di irda-modules-3.2.0-3-686-pae-di parport-modules-3.2.0-3-686-pae-di nic-pcmcia-modules-3.2.0-3-686-pae-di pcmcia-modules-3.2.0-3-686-pae-di nic-usb-modules-3.2.0-3-686-pae-di sata-modules-3.2.0-3-686-pae-di core-modules-3.2.0-3-686-pae-di acpi-modules-3.2.0-3-686-pae-di i2c-modules-3.2.0-3-686-pae-di crc-modules-3.2.0-3-686-pae-di crypto-modules-3.2.0-3-686-pae-di crypto-dm-modules-3.2.0-3-686-pae-di efi-modules-3.2.0-3-686-pae-di ata-modules-3.2.0-3-686-pae-di mmc-core-modules-3.2.0-3-686-pae-di mmc-modules-3.2.0-3-686-pae-di nbd-modules-3.2.0-3-686-pae-di squashfs-modules-3.2.0-3-686-pae-di speakup-modules-3.2.0-3-686-pae-di virtio-modules-3.2.0-3-686-pae-di uinput-modules-3.2.0-3-686-pae-di sound-modules-3.2.0-3-686-pae-di zlib-modules-3.2.0-3-686-pae-di hyperv-modules-3.2.0-3-686-pae-di udf-modules-3.2.0-3-686-pae-di' + $(MAKE) -f debian/rules.real install-udeb_i386 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-486-di nic-modules-3.2.0-3-486-di nic-extra-modules-3.2.0-3-486-di nic-wireless-modules-3.2.0-3-486-di nic-shared-modules-3.2.0-3-486-di serial-modules-3.2.0-3-486-di usb-serial-modules-3.2.0-3-486-di ppp-modules-3.2.0-3-486-di pata-modules-3.2.0-3-486-di cdrom-core-modules-3.2.0-3-486-di firewire-core-modules-3.2.0-3-486-di scsi-core-modules-3.2.0-3-486-di scsi-modules-3.2.0-3-486-di scsi-common-modules-3.2.0-3-486-di scsi-extra-modules-3.2.0-3-486-di plip-modules-3.2.0-3-486-di floppy-modules-3.2.0-3-486-di loop-modules-3.2.0-3-486-di btrfs-modules-3.2.0-3-486-di ext2-modules-3.2.0-3-486-di ext3-modules-3.2.0-3-486-di ext4-modules-3.2.0-3-486-di isofs-modules-3.2.0-3-486-di jfs-modules-3.2.0-3-486-di ntfs-modules-3.2.0-3-486-di reiserfs-modules-3.2.0-3-486-di xfs-modules-3.2.0-3-486-di fat-modules-3.2.0-3-486-di ufs-modules-3.2.0-3-486-di qnx4-modules-3.2.0-3-486-di md-modules-3.2.0-3-486-di multipath-modules-3.2.0-3-486-di usb-modules-3.2.0-3-486-di usb-storage-modules-3.2.0-3-486-di pcmcia-storage-modules-3.2.0-3-486-di fb-modules-3.2.0-3-486-di input-modules-3.2.0-3-486-di event-modules-3.2.0-3-486-di mouse-modules-3.2.0-3-486-di irda-modules-3.2.0-3-486-di parport-modules-3.2.0-3-486-di nic-pcmcia-modules-3.2.0-3-486-di pcmcia-modules-3.2.0-3-486-di nic-usb-modules-3.2.0-3-486-di sata-modules-3.2.0-3-486-di core-modules-3.2.0-3-486-di acpi-modules-3.2.0-3-486-di i2c-modules-3.2.0-3-486-di crc-modules-3.2.0-3-486-di crypto-modules-3.2.0-3-486-di crypto-dm-modules-3.2.0-3-486-di efi-modules-3.2.0-3-486-di ata-modules-3.2.0-3-486-di mmc-core-modules-3.2.0-3-486-di mmc-modules-3.2.0-3-486-di nbd-modules-3.2.0-3-486-di squashfs-modules-3.2.0-3-486-di speakup-modules-3.2.0-3-486-di virtio-modules-3.2.0-3-486-di uinput-modules-3.2.0-3-486-di sound-modules-3.2.0-3-486-di zlib-modules-3.2.0-3-486-di hyperv-modules-3.2.0-3-486-di udf-modules-3.2.0-3-486-di kernel-image-3.2.0-3-686-pae-di nic-modules-3.2.0-3-686-pae-di nic-extra-modules-3.2.0-3-686-pae-di nic-wireless-modules-3.2.0-3-686-pae-di nic-shared-modules-3.2.0-3-686-pae-di serial-modules-3.2.0-3-686-pae-di usb-serial-modules-3.2.0-3-686-pae-di ppp-modules-3.2.0-3-686-pae-di pata-modules-3.2.0-3-686-pae-di cdrom-core-modules-3.2.0-3-686-pae-di firewire-core-modules-3.2.0-3-686-pae-di scsi-core-modules-3.2.0-3-686-pae-di scsi-modules-3.2.0-3-686-pae-di scsi-common-modules-3.2.0-3-686-pae-di scsi-extra-modules-3.2.0-3-686-pae-di plip-modules-3.2.0-3-686-pae-di floppy-modules-3.2.0-3-686-pae-di loop-modules-3.2.0-3-686-pae-di btrfs-modules-3.2.0-3-686-pae-di ext2-modules-3.2.0-3-686-pae-di ext3-modules-3.2.0-3-686-pae-di ext4-modules-3.2.0-3-686-pae-di isofs-modules-3.2.0-3-686-pae-di jfs-modules-3.2.0-3-686-pae-di ntfs-modules-3.2.0-3-686-pae-di reiserfs-modules-3.2.0-3-686-pae-di xfs-modules-3.2.0-3-686-pae-di fat-modules-3.2.0-3-686-pae-di ufs-modules-3.2.0-3-686-pae-di qnx4-modules-3.2.0-3-686-pae-di md-modules-3.2.0-3-686-pae-di multipath-modules-3.2.0-3-686-pae-di usb-modules-3.2.0-3-686-pae-di usb-storage-modules-3.2.0-3-686-pae-di pcmcia-storage-modules-3.2.0-3-686-pae-di fb-modules-3.2.0-3-686-pae-di input-modules-3.2.0-3-686-pae-di event-modules-3.2.0-3-686-pae-di mouse-modules-3.2.0-3-686-pae-di irda-modules-3.2.0-3-686-pae-di parport-modules-3.2.0-3-686-pae-di nic-pcmcia-modules-3.2.0-3-686-pae-di pcmcia-modules-3.2.0-3-686-pae-di nic-usb-modules-3.2.0-3-686-pae-di sata-modules-3.2.0-3-686-pae-di core-modules-3.2.0-3-686-pae-di acpi-modules-3.2.0-3-686-pae-di i2c-modules-3.2.0-3-686-pae-di crc-modules-3.2.0-3-686-pae-di crypto-modules-3.2.0-3-686-pae-di crypto-dm-modules-3.2.0-3-686-pae-di efi-modules-3.2.0-3-686-pae-di ata-modules-3.2.0-3-686-pae-di mmc-core-modules-3.2.0-3-686-pae-di mmc-modules-3.2.0-3-686-pae-di nbd-modules-3.2.0-3-686-pae-di squashfs-modules-3.2.0-3-686-pae-di speakup-modules-3.2.0-3-686-pae-di virtio-modules-3.2.0-3-686-pae-di uinput-modules-3.2.0-3-686-pae-di sound-modules-3.2.0-3-686-pae-di zlib-modules-3.2.0-3-686-pae-di hyperv-modules-3.2.0-3-686-pae-di udf-modules-3.2.0-3-686-pae-di' binary-arch_i386_none: binary-arch_i386_none_486 binary-arch_i386_none_686-pae binary-arch_i386_none_amd64 binary-arch_i386_none_real binary-arch_i386_none_486: binary-arch_i386_none_486_real binary-arch_i386_none_486_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='486' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.486' KERNEL_ARCH='x86' LOCALVERSION='-486' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-486' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='486' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.486' KERNEL_ARCH='x86' LOCALVERSION='-486' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-486' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_i386_none_686-pae: binary-arch_i386_none_686-pae_real binary-arch_i386_none_686-pae_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' - $(MAKE) -f debian/rules.real install-dummy DH_OPTIONS='-pxen-linux-system-3.2.0-3-686-pae' ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-dummy DH_OPTIONS='-pxen-linux-system-3.2.0-3-686-pae' ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_i386_none_amd64: binary-arch_i386_none_amd64_real binary-arch_i386_none_amd64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' - $(MAKE) -f debian/rules.real install-dummy DH_OPTIONS='-pxen-linux-system-3.2.0-3-amd64' ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-dummy DH_OPTIONS='-pxen-linux-system-3.2.0-3-amd64' ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_i386_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' FEATURESET='none' KERNEL_ARCH='x86' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' FEATURESET='none' KERNEL_ARCH='x86' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_i386_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_i386_rt: binary-arch_i386_rt_686-pae binary-arch_i386_rt_real binary-arch_i386_rt_686-pae: binary-arch_i386_rt_686-pae_real binary-arch_i386_rt_686-pae_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/featureset-rt/config debian/config/i386/rt/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/featureset-rt/config debian/config/i386/rt/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_i386_rt_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' FEATURESET='rt' KERNEL_ARCH='x86' LOCALVERSION_HEADERS='-rt' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' FEATURESET='rt' KERNEL_ARCH='x86' LOCALVERSION_HEADERS='-rt' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_ia64:: binary-arch_ia64_none binary-arch_ia64_real binary-arch_ia64:: - $(MAKE) -f debian/rules.real install-udeb_ia64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' KERNEL_ARCH='ia64' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-itanium-di nic-modules-3.2.0-3-itanium-di nic-shared-modules-3.2.0-3-itanium-di serial-modules-3.2.0-3-itanium-di ppp-modules-3.2.0-3-itanium-di ide-modules-3.2.0-3-itanium-di pata-modules-3.2.0-3-itanium-di ide-core-modules-3.2.0-3-itanium-di cdrom-core-modules-3.2.0-3-itanium-di firewire-core-modules-3.2.0-3-itanium-di scsi-core-modules-3.2.0-3-itanium-di scsi-modules-3.2.0-3-itanium-di plip-modules-3.2.0-3-itanium-di loop-modules-3.2.0-3-itanium-di ipv6-modules-3.2.0-3-itanium-di btrfs-modules-3.2.0-3-itanium-di ext2-modules-3.2.0-3-itanium-di ext3-modules-3.2.0-3-itanium-di ext4-modules-3.2.0-3-itanium-di isofs-modules-3.2.0-3-itanium-di jfs-modules-3.2.0-3-itanium-di ntfs-modules-3.2.0-3-itanium-di reiserfs-modules-3.2.0-3-itanium-di xfs-modules-3.2.0-3-itanium-di fat-modules-3.2.0-3-itanium-di ufs-modules-3.2.0-3-itanium-di md-modules-3.2.0-3-itanium-di multipath-modules-3.2.0-3-itanium-di usb-modules-3.2.0-3-itanium-di usb-storage-modules-3.2.0-3-itanium-di fb-modules-3.2.0-3-itanium-di input-modules-3.2.0-3-itanium-di event-modules-3.2.0-3-itanium-di mouse-modules-3.2.0-3-itanium-di irda-modules-3.2.0-3-itanium-di parport-modules-3.2.0-3-itanium-di pcmcia-modules-3.2.0-3-itanium-di nic-usb-modules-3.2.0-3-itanium-di sata-modules-3.2.0-3-itanium-di core-modules-3.2.0-3-itanium-di crc-modules-3.2.0-3-itanium-di crypto-modules-3.2.0-3-itanium-di crypto-dm-modules-3.2.0-3-itanium-di efi-modules-3.2.0-3-itanium-di ata-modules-3.2.0-3-itanium-di nbd-modules-3.2.0-3-itanium-di squashfs-modules-3.2.0-3-itanium-di uinput-modules-3.2.0-3-itanium-di zlib-modules-3.2.0-3-itanium-di udf-modules-3.2.0-3-itanium-di sn-modules-3.2.0-3-itanium-di' + $(MAKE) -f debian/rules.real install-udeb_ia64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' KERNEL_ARCH='ia64' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-itanium-di nic-modules-3.2.0-3-itanium-di nic-shared-modules-3.2.0-3-itanium-di serial-modules-3.2.0-3-itanium-di ppp-modules-3.2.0-3-itanium-di ide-modules-3.2.0-3-itanium-di pata-modules-3.2.0-3-itanium-di ide-core-modules-3.2.0-3-itanium-di cdrom-core-modules-3.2.0-3-itanium-di firewire-core-modules-3.2.0-3-itanium-di scsi-core-modules-3.2.0-3-itanium-di scsi-modules-3.2.0-3-itanium-di plip-modules-3.2.0-3-itanium-di loop-modules-3.2.0-3-itanium-di ipv6-modules-3.2.0-3-itanium-di btrfs-modules-3.2.0-3-itanium-di ext2-modules-3.2.0-3-itanium-di ext3-modules-3.2.0-3-itanium-di ext4-modules-3.2.0-3-itanium-di isofs-modules-3.2.0-3-itanium-di jfs-modules-3.2.0-3-itanium-di ntfs-modules-3.2.0-3-itanium-di reiserfs-modules-3.2.0-3-itanium-di xfs-modules-3.2.0-3-itanium-di fat-modules-3.2.0-3-itanium-di ufs-modules-3.2.0-3-itanium-di md-modules-3.2.0-3-itanium-di multipath-modules-3.2.0-3-itanium-di usb-modules-3.2.0-3-itanium-di usb-storage-modules-3.2.0-3-itanium-di fb-modules-3.2.0-3-itanium-di input-modules-3.2.0-3-itanium-di event-modules-3.2.0-3-itanium-di mouse-modules-3.2.0-3-itanium-di irda-modules-3.2.0-3-itanium-di parport-modules-3.2.0-3-itanium-di pcmcia-modules-3.2.0-3-itanium-di nic-usb-modules-3.2.0-3-itanium-di sata-modules-3.2.0-3-itanium-di core-modules-3.2.0-3-itanium-di crc-modules-3.2.0-3-itanium-di crypto-modules-3.2.0-3-itanium-di crypto-dm-modules-3.2.0-3-itanium-di efi-modules-3.2.0-3-itanium-di ata-modules-3.2.0-3-itanium-di nbd-modules-3.2.0-3-itanium-di squashfs-modules-3.2.0-3-itanium-di uinput-modules-3.2.0-3-itanium-di zlib-modules-3.2.0-3-itanium-di udf-modules-3.2.0-3-itanium-di sn-modules-3.2.0-3-itanium-di' binary-arch_ia64_none: binary-arch_ia64_none_itanium binary-arch_ia64_none_mckinley binary-arch_ia64_none_real binary-arch_ia64_none_itanium: binary-arch_ia64_none_itanium_real binary-arch_ia64_none_itanium_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='itanium' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.itanium' KERNEL_ARCH='ia64' LOCALVERSION='-itanium' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-itanium' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='itanium' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.itanium' KERNEL_ARCH='ia64' LOCALVERSION='-itanium' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-itanium' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_ia64_none_mckinley: binary-arch_ia64_none_mckinley_real binary-arch_ia64_none_mckinley_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mckinley' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.mckinley' KERNEL_ARCH='ia64' LOCALVERSION='-mckinley' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mckinley' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mckinley' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.mckinley' KERNEL_ARCH='ia64' LOCALVERSION='-mckinley' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mckinley' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_ia64_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' FEATURESET='none' KERNEL_ARCH='ia64' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' FEATURESET='none' KERNEL_ARCH='ia64' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_ia64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' KERNEL_ARCH='ia64' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' KERNEL_ARCH='ia64' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_m68k:: binary-arch_m68k_none binary-arch_m68k_real binary-arch_m68k:: - $(MAKE) -f debian/rules.real install-udeb_m68k ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-amiga-di nic-shared-modules-3.2.0-3-amiga-di ppp-modules-3.2.0-3-amiga-di cdrom-core-modules-3.2.0-3-amiga-di scsi-modules-3.2.0-3-amiga-di ipv6-modules-3.2.0-3-amiga-di btrfs-modules-3.2.0-3-amiga-di isofs-modules-3.2.0-3-amiga-di jfs-modules-3.2.0-3-amiga-di reiserfs-modules-3.2.0-3-amiga-di fat-modules-3.2.0-3-amiga-di md-modules-3.2.0-3-amiga-di crypto-modules-3.2.0-3-amiga-di nbd-modules-3.2.0-3-amiga-di squashfs-modules-3.2.0-3-amiga-di zlib-modules-3.2.0-3-amiga-di udf-modules-3.2.0-3-amiga-di kernel-image-3.2.0-3-atari-di nic-shared-modules-3.2.0-3-atari-di ppp-modules-3.2.0-3-atari-di cdrom-core-modules-3.2.0-3-atari-di scsi-modules-3.2.0-3-atari-di ipv6-modules-3.2.0-3-atari-di btrfs-modules-3.2.0-3-atari-di isofs-modules-3.2.0-3-atari-di jfs-modules-3.2.0-3-atari-di reiserfs-modules-3.2.0-3-atari-di fat-modules-3.2.0-3-atari-di md-modules-3.2.0-3-atari-di crypto-modules-3.2.0-3-atari-di nbd-modules-3.2.0-3-atari-di squashfs-modules-3.2.0-3-atari-di zlib-modules-3.2.0-3-atari-di udf-modules-3.2.0-3-atari-di kernel-image-3.2.0-3-mac-di nic-shared-modules-3.2.0-3-mac-di ppp-modules-3.2.0-3-mac-di cdrom-core-modules-3.2.0-3-mac-di scsi-modules-3.2.0-3-mac-di ipv6-modules-3.2.0-3-mac-di btrfs-modules-3.2.0-3-mac-di isofs-modules-3.2.0-3-mac-di jfs-modules-3.2.0-3-mac-di reiserfs-modules-3.2.0-3-mac-di fat-modules-3.2.0-3-mac-di md-modules-3.2.0-3-mac-di crypto-modules-3.2.0-3-mac-di nbd-modules-3.2.0-3-mac-di squashfs-modules-3.2.0-3-mac-di zlib-modules-3.2.0-3-mac-di udf-modules-3.2.0-3-mac-di' + $(MAKE) -f debian/rules.real install-udeb_m68k ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-amiga-di nic-shared-modules-3.2.0-3-amiga-di ppp-modules-3.2.0-3-amiga-di cdrom-core-modules-3.2.0-3-amiga-di scsi-modules-3.2.0-3-amiga-di ipv6-modules-3.2.0-3-amiga-di btrfs-modules-3.2.0-3-amiga-di isofs-modules-3.2.0-3-amiga-di jfs-modules-3.2.0-3-amiga-di reiserfs-modules-3.2.0-3-amiga-di fat-modules-3.2.0-3-amiga-di md-modules-3.2.0-3-amiga-di crypto-modules-3.2.0-3-amiga-di nbd-modules-3.2.0-3-amiga-di squashfs-modules-3.2.0-3-amiga-di zlib-modules-3.2.0-3-amiga-di udf-modules-3.2.0-3-amiga-di kernel-image-3.2.0-3-atari-di nic-shared-modules-3.2.0-3-atari-di ppp-modules-3.2.0-3-atari-di cdrom-core-modules-3.2.0-3-atari-di scsi-modules-3.2.0-3-atari-di ipv6-modules-3.2.0-3-atari-di btrfs-modules-3.2.0-3-atari-di isofs-modules-3.2.0-3-atari-di jfs-modules-3.2.0-3-atari-di reiserfs-modules-3.2.0-3-atari-di fat-modules-3.2.0-3-atari-di md-modules-3.2.0-3-atari-di crypto-modules-3.2.0-3-atari-di nbd-modules-3.2.0-3-atari-di squashfs-modules-3.2.0-3-atari-di zlib-modules-3.2.0-3-atari-di udf-modules-3.2.0-3-atari-di kernel-image-3.2.0-3-mac-di nic-shared-modules-3.2.0-3-mac-di ppp-modules-3.2.0-3-mac-di cdrom-core-modules-3.2.0-3-mac-di scsi-modules-3.2.0-3-mac-di ipv6-modules-3.2.0-3-mac-di btrfs-modules-3.2.0-3-mac-di isofs-modules-3.2.0-3-mac-di jfs-modules-3.2.0-3-mac-di reiserfs-modules-3.2.0-3-mac-di fat-modules-3.2.0-3-mac-di md-modules-3.2.0-3-mac-di crypto-modules-3.2.0-3-mac-di nbd-modules-3.2.0-3-mac-di squashfs-modules-3.2.0-3-mac-di zlib-modules-3.2.0-3-mac-di udf-modules-3.2.0-3-mac-di' binary-arch_m68k_none: binary-arch_m68k_none_amiga binary-arch_m68k_none_atari binary-arch_m68k_none_bvme6000 binary-arch_m68k_none_mac binary-arch_m68k_none_mvme147 binary-arch_m68k_none_mvme16x binary-arch_m68k_none_real binary-arch_m68k_none_amiga: binary-arch_m68k_none_amiga_real binary-arch_m68k_none_amiga_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amiga' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.amiga' KERNEL_ARCH='m68k' LOCALVERSION='-amiga' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amiga' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amiga' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.amiga' KERNEL_ARCH='m68k' LOCALVERSION='-amiga' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amiga' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_m68k_none_atari: binary-arch_m68k_none_atari_real binary-arch_m68k_none_atari_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='atari' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.atari' KERNEL_ARCH='m68k' LOCALVERSION='-atari' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-atari' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='atari' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.atari' KERNEL_ARCH='m68k' LOCALVERSION='-atari' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-atari' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_m68k_none_bvme6000: binary-arch_m68k_none_bvme6000_real binary-arch_m68k_none_bvme6000_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='bvme6000' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.bvme6000' KERNEL_ARCH='m68k' LOCALVERSION='-bvme6000' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-bvme6000' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='bvme6000' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.bvme6000' KERNEL_ARCH='m68k' LOCALVERSION='-bvme6000' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-bvme6000' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_m68k_none_mac: binary-arch_m68k_none_mac_real binary-arch_m68k_none_mac_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mac' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mac' KERNEL_ARCH='m68k' LOCALVERSION='-mac' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mac' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mac' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mac' KERNEL_ARCH='m68k' LOCALVERSION='-mac' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mac' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_m68k_none_mvme147: binary-arch_m68k_none_mvme147_real binary-arch_m68k_none_mvme147_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme147' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme147' KERNEL_ARCH='m68k' LOCALVERSION='-mvme147' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme147' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme147' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme147' KERNEL_ARCH='m68k' LOCALVERSION='-mvme147' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme147' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_m68k_none_mvme16x: binary-arch_m68k_none_mvme16x_real binary-arch_m68k_none_mvme16x_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme16x' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme16x' KERNEL_ARCH='m68k' LOCALVERSION='-mvme16x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme16x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme16x' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme16x' KERNEL_ARCH='m68k' LOCALVERSION='-mvme16x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme16x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_m68k_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' FEATURESET='none' KERNEL_ARCH='m68k' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' FEATURESET='none' KERNEL_ARCH='m68k' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_m68k_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips:: binary-arch_mips_none binary-arch_mips_real binary-arch_mips:: - $(MAKE) -f debian/rules.real install-udeb_mips ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sb1-bcm91250a-di nic-shared-modules-3.2.0-3-sb1-bcm91250a-di ppp-modules-3.2.0-3-sb1-bcm91250a-di cdrom-core-modules-3.2.0-3-sb1-bcm91250a-di scsi-core-modules-3.2.0-3-sb1-bcm91250a-di scsi-modules-3.2.0-3-sb1-bcm91250a-di scsi-common-modules-3.2.0-3-sb1-bcm91250a-di loop-modules-3.2.0-3-sb1-bcm91250a-di ipv6-modules-3.2.0-3-sb1-bcm91250a-di btrfs-modules-3.2.0-3-sb1-bcm91250a-di isofs-modules-3.2.0-3-sb1-bcm91250a-di jfs-modules-3.2.0-3-sb1-bcm91250a-di reiserfs-modules-3.2.0-3-sb1-bcm91250a-di xfs-modules-3.2.0-3-sb1-bcm91250a-di fat-modules-3.2.0-3-sb1-bcm91250a-di md-modules-3.2.0-3-sb1-bcm91250a-di multipath-modules-3.2.0-3-sb1-bcm91250a-di usb-modules-3.2.0-3-sb1-bcm91250a-di usb-storage-modules-3.2.0-3-sb1-bcm91250a-di fb-modules-3.2.0-3-sb1-bcm91250a-di input-modules-3.2.0-3-sb1-bcm91250a-di sata-modules-3.2.0-3-sb1-bcm91250a-di crypto-modules-3.2.0-3-sb1-bcm91250a-di crypto-dm-modules-3.2.0-3-sb1-bcm91250a-di nbd-modules-3.2.0-3-sb1-bcm91250a-di squashfs-modules-3.2.0-3-sb1-bcm91250a-di rtc-modules-3.2.0-3-sb1-bcm91250a-di zlib-modules-3.2.0-3-sb1-bcm91250a-di udf-modules-3.2.0-3-sb1-bcm91250a-di kernel-image-3.2.0-3-r4k-ip22-di nic-shared-modules-3.2.0-3-r4k-ip22-di loop-modules-3.2.0-3-r4k-ip22-di ipv6-modules-3.2.0-3-r4k-ip22-di btrfs-modules-3.2.0-3-r4k-ip22-di isofs-modules-3.2.0-3-r4k-ip22-di jfs-modules-3.2.0-3-r4k-ip22-di reiserfs-modules-3.2.0-3-r4k-ip22-di xfs-modules-3.2.0-3-r4k-ip22-di md-modules-3.2.0-3-r4k-ip22-di multipath-modules-3.2.0-3-r4k-ip22-di crypto-modules-3.2.0-3-r4k-ip22-di crypto-dm-modules-3.2.0-3-r4k-ip22-di nbd-modules-3.2.0-3-r4k-ip22-di squashfs-modules-3.2.0-3-r4k-ip22-di zlib-modules-3.2.0-3-r4k-ip22-di udf-modules-3.2.0-3-r4k-ip22-di kernel-image-3.2.0-3-r5k-ip32-di nic-shared-modules-3.2.0-3-r5k-ip32-di loop-modules-3.2.0-3-r5k-ip32-di ipv6-modules-3.2.0-3-r5k-ip32-di btrfs-modules-3.2.0-3-r5k-ip32-di isofs-modules-3.2.0-3-r5k-ip32-di jfs-modules-3.2.0-3-r5k-ip32-di reiserfs-modules-3.2.0-3-r5k-ip32-di xfs-modules-3.2.0-3-r5k-ip32-di md-modules-3.2.0-3-r5k-ip32-di multipath-modules-3.2.0-3-r5k-ip32-di crypto-modules-3.2.0-3-r5k-ip32-di crypto-dm-modules-3.2.0-3-r5k-ip32-di nbd-modules-3.2.0-3-r5k-ip32-di squashfs-modules-3.2.0-3-r5k-ip32-di zlib-modules-3.2.0-3-r5k-ip32-di udf-modules-3.2.0-3-r5k-ip32-di kernel-image-3.2.0-3-4kc-malta-di ppp-modules-3.2.0-3-4kc-malta-di cdrom-core-modules-3.2.0-3-4kc-malta-di loop-modules-3.2.0-3-4kc-malta-di ipv6-modules-3.2.0-3-4kc-malta-di btrfs-modules-3.2.0-3-4kc-malta-di isofs-modules-3.2.0-3-4kc-malta-di jfs-modules-3.2.0-3-4kc-malta-di reiserfs-modules-3.2.0-3-4kc-malta-di xfs-modules-3.2.0-3-4kc-malta-di fat-modules-3.2.0-3-4kc-malta-di md-modules-3.2.0-3-4kc-malta-di multipath-modules-3.2.0-3-4kc-malta-di usb-modules-3.2.0-3-4kc-malta-di usb-storage-modules-3.2.0-3-4kc-malta-di input-modules-3.2.0-3-4kc-malta-di sata-modules-3.2.0-3-4kc-malta-di crypto-modules-3.2.0-3-4kc-malta-di crypto-dm-modules-3.2.0-3-4kc-malta-di nbd-modules-3.2.0-3-4kc-malta-di squashfs-modules-3.2.0-3-4kc-malta-di virtio-modules-3.2.0-3-4kc-malta-di zlib-modules-3.2.0-3-4kc-malta-di udf-modules-3.2.0-3-4kc-malta-di' + $(MAKE) -f debian/rules.real install-udeb_mips ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sb1-bcm91250a-di nic-shared-modules-3.2.0-3-sb1-bcm91250a-di ppp-modules-3.2.0-3-sb1-bcm91250a-di cdrom-core-modules-3.2.0-3-sb1-bcm91250a-di scsi-core-modules-3.2.0-3-sb1-bcm91250a-di scsi-modules-3.2.0-3-sb1-bcm91250a-di scsi-common-modules-3.2.0-3-sb1-bcm91250a-di loop-modules-3.2.0-3-sb1-bcm91250a-di ipv6-modules-3.2.0-3-sb1-bcm91250a-di btrfs-modules-3.2.0-3-sb1-bcm91250a-di isofs-modules-3.2.0-3-sb1-bcm91250a-di jfs-modules-3.2.0-3-sb1-bcm91250a-di reiserfs-modules-3.2.0-3-sb1-bcm91250a-di xfs-modules-3.2.0-3-sb1-bcm91250a-di fat-modules-3.2.0-3-sb1-bcm91250a-di md-modules-3.2.0-3-sb1-bcm91250a-di multipath-modules-3.2.0-3-sb1-bcm91250a-di usb-modules-3.2.0-3-sb1-bcm91250a-di usb-storage-modules-3.2.0-3-sb1-bcm91250a-di fb-modules-3.2.0-3-sb1-bcm91250a-di input-modules-3.2.0-3-sb1-bcm91250a-di sata-modules-3.2.0-3-sb1-bcm91250a-di crypto-modules-3.2.0-3-sb1-bcm91250a-di crypto-dm-modules-3.2.0-3-sb1-bcm91250a-di nbd-modules-3.2.0-3-sb1-bcm91250a-di squashfs-modules-3.2.0-3-sb1-bcm91250a-di rtc-modules-3.2.0-3-sb1-bcm91250a-di zlib-modules-3.2.0-3-sb1-bcm91250a-di udf-modules-3.2.0-3-sb1-bcm91250a-di kernel-image-3.2.0-3-r4k-ip22-di nic-shared-modules-3.2.0-3-r4k-ip22-di loop-modules-3.2.0-3-r4k-ip22-di ipv6-modules-3.2.0-3-r4k-ip22-di btrfs-modules-3.2.0-3-r4k-ip22-di isofs-modules-3.2.0-3-r4k-ip22-di jfs-modules-3.2.0-3-r4k-ip22-di reiserfs-modules-3.2.0-3-r4k-ip22-di xfs-modules-3.2.0-3-r4k-ip22-di md-modules-3.2.0-3-r4k-ip22-di multipath-modules-3.2.0-3-r4k-ip22-di crypto-modules-3.2.0-3-r4k-ip22-di crypto-dm-modules-3.2.0-3-r4k-ip22-di nbd-modules-3.2.0-3-r4k-ip22-di squashfs-modules-3.2.0-3-r4k-ip22-di zlib-modules-3.2.0-3-r4k-ip22-di udf-modules-3.2.0-3-r4k-ip22-di kernel-image-3.2.0-3-r5k-ip32-di nic-shared-modules-3.2.0-3-r5k-ip32-di loop-modules-3.2.0-3-r5k-ip32-di ipv6-modules-3.2.0-3-r5k-ip32-di btrfs-modules-3.2.0-3-r5k-ip32-di isofs-modules-3.2.0-3-r5k-ip32-di jfs-modules-3.2.0-3-r5k-ip32-di reiserfs-modules-3.2.0-3-r5k-ip32-di xfs-modules-3.2.0-3-r5k-ip32-di md-modules-3.2.0-3-r5k-ip32-di multipath-modules-3.2.0-3-r5k-ip32-di crypto-modules-3.2.0-3-r5k-ip32-di crypto-dm-modules-3.2.0-3-r5k-ip32-di nbd-modules-3.2.0-3-r5k-ip32-di squashfs-modules-3.2.0-3-r5k-ip32-di zlib-modules-3.2.0-3-r5k-ip32-di udf-modules-3.2.0-3-r5k-ip32-di kernel-image-3.2.0-3-4kc-malta-di ppp-modules-3.2.0-3-4kc-malta-di cdrom-core-modules-3.2.0-3-4kc-malta-di loop-modules-3.2.0-3-4kc-malta-di ipv6-modules-3.2.0-3-4kc-malta-di btrfs-modules-3.2.0-3-4kc-malta-di isofs-modules-3.2.0-3-4kc-malta-di jfs-modules-3.2.0-3-4kc-malta-di reiserfs-modules-3.2.0-3-4kc-malta-di xfs-modules-3.2.0-3-4kc-malta-di fat-modules-3.2.0-3-4kc-malta-di md-modules-3.2.0-3-4kc-malta-di multipath-modules-3.2.0-3-4kc-malta-di usb-modules-3.2.0-3-4kc-malta-di usb-storage-modules-3.2.0-3-4kc-malta-di input-modules-3.2.0-3-4kc-malta-di sata-modules-3.2.0-3-4kc-malta-di crypto-modules-3.2.0-3-4kc-malta-di crypto-dm-modules-3.2.0-3-4kc-malta-di nbd-modules-3.2.0-3-4kc-malta-di squashfs-modules-3.2.0-3-4kc-malta-di virtio-modules-3.2.0-3-4kc-malta-di zlib-modules-3.2.0-3-4kc-malta-di udf-modules-3.2.0-3-4kc-malta-di' binary-arch_mips_none: binary-arch_mips_none_4kc-malta binary-arch_mips_none_5kc-malta binary-arch_mips_none_octeon binary-arch_mips_none_r4k-ip22 binary-arch_mips_none_r5k-ip32 binary-arch_mips_none_real binary-arch_mips_none_sb1-bcm91250a binary-arch_mips_none_sb1a-bcm91480b binary-arch_mips_none_4kc-malta: binary-arch_mips_none_4kc-malta_real binary-arch_mips_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips_none_5kc-malta: binary-arch_mips_none_5kc-malta_real binary-arch_mips_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips_none_octeon: binary-arch_mips_none_octeon_real binary-arch_mips_none_octeon_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='octeon' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.octeon' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='octeon' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.octeon' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips_none_r4k-ip22: binary-arch_mips_none_r4k-ip22_real binary-arch_mips_none_r4k-ip22_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r4k-ip22' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r4k-ip22' KERNEL_ARCH='mips' LOCALVERSION='-r4k-ip22' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r4k-ip22' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r4k-ip22' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r4k-ip22' KERNEL_ARCH='mips' LOCALVERSION='-r4k-ip22' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r4k-ip22' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips_none_r5k-ip32: binary-arch_mips_none_r5k-ip32_real binary-arch_mips_none_r5k-ip32_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-ip32' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r5k-ip32' KERNEL_ARCH='mips' LOCALVERSION='-r5k-ip32' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-ip32' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-ip32' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r5k-ip32' KERNEL_ARCH='mips' LOCALVERSION='-r5k-ip32' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-ip32' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' FEATURESET='none' KERNEL_ARCH='mips' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' FEATURESET='none' KERNEL_ARCH='mips' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips_none_sb1-bcm91250a: binary-arch_mips_none_sb1-bcm91250a_real binary-arch_mips_none_sb1-bcm91250a_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips_none_sb1a-bcm91480b: binary-arch_mips_none_sb1a-bcm91480b_real binary-arch_mips_none_sb1a-bcm91480b_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mips_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mipsel:: binary-arch_mipsel_none binary-arch_mipsel_real binary-arch_mipsel:: - $(MAKE) -f debian/rules.real install-udeb_mipsel ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sb1-bcm91250a-di nic-shared-modules-3.2.0-3-sb1-bcm91250a-di ppp-modules-3.2.0-3-sb1-bcm91250a-di cdrom-core-modules-3.2.0-3-sb1-bcm91250a-di scsi-core-modules-3.2.0-3-sb1-bcm91250a-di scsi-modules-3.2.0-3-sb1-bcm91250a-di scsi-common-modules-3.2.0-3-sb1-bcm91250a-di loop-modules-3.2.0-3-sb1-bcm91250a-di ipv6-modules-3.2.0-3-sb1-bcm91250a-di btrfs-modules-3.2.0-3-sb1-bcm91250a-di isofs-modules-3.2.0-3-sb1-bcm91250a-di jfs-modules-3.2.0-3-sb1-bcm91250a-di reiserfs-modules-3.2.0-3-sb1-bcm91250a-di xfs-modules-3.2.0-3-sb1-bcm91250a-di fat-modules-3.2.0-3-sb1-bcm91250a-di md-modules-3.2.0-3-sb1-bcm91250a-di multipath-modules-3.2.0-3-sb1-bcm91250a-di usb-modules-3.2.0-3-sb1-bcm91250a-di usb-storage-modules-3.2.0-3-sb1-bcm91250a-di fb-modules-3.2.0-3-sb1-bcm91250a-di input-modules-3.2.0-3-sb1-bcm91250a-di sata-modules-3.2.0-3-sb1-bcm91250a-di crypto-modules-3.2.0-3-sb1-bcm91250a-di crypto-dm-modules-3.2.0-3-sb1-bcm91250a-di nbd-modules-3.2.0-3-sb1-bcm91250a-di squashfs-modules-3.2.0-3-sb1-bcm91250a-di rtc-modules-3.2.0-3-sb1-bcm91250a-di zlib-modules-3.2.0-3-sb1-bcm91250a-di udf-modules-3.2.0-3-sb1-bcm91250a-di kernel-image-3.2.0-3-r5k-cobalt-di nic-shared-modules-3.2.0-3-r5k-cobalt-di ppp-modules-3.2.0-3-r5k-cobalt-di loop-modules-3.2.0-3-r5k-cobalt-di ipv6-modules-3.2.0-3-r5k-cobalt-di btrfs-modules-3.2.0-3-r5k-cobalt-di jfs-modules-3.2.0-3-r5k-cobalt-di reiserfs-modules-3.2.0-3-r5k-cobalt-di xfs-modules-3.2.0-3-r5k-cobalt-di fat-modules-3.2.0-3-r5k-cobalt-di nfs-modules-3.2.0-3-r5k-cobalt-di md-modules-3.2.0-3-r5k-cobalt-di multipath-modules-3.2.0-3-r5k-cobalt-di crypto-modules-3.2.0-3-r5k-cobalt-di crypto-dm-modules-3.2.0-3-r5k-cobalt-di nbd-modules-3.2.0-3-r5k-cobalt-di squashfs-modules-3.2.0-3-r5k-cobalt-di zlib-modules-3.2.0-3-r5k-cobalt-di kernel-image-3.2.0-3-4kc-malta-di ppp-modules-3.2.0-3-4kc-malta-di cdrom-core-modules-3.2.0-3-4kc-malta-di loop-modules-3.2.0-3-4kc-malta-di ipv6-modules-3.2.0-3-4kc-malta-di btrfs-modules-3.2.0-3-4kc-malta-di isofs-modules-3.2.0-3-4kc-malta-di jfs-modules-3.2.0-3-4kc-malta-di reiserfs-modules-3.2.0-3-4kc-malta-di xfs-modules-3.2.0-3-4kc-malta-di fat-modules-3.2.0-3-4kc-malta-di md-modules-3.2.0-3-4kc-malta-di multipath-modules-3.2.0-3-4kc-malta-di usb-modules-3.2.0-3-4kc-malta-di usb-storage-modules-3.2.0-3-4kc-malta-di input-modules-3.2.0-3-4kc-malta-di sata-modules-3.2.0-3-4kc-malta-di crypto-modules-3.2.0-3-4kc-malta-di crypto-dm-modules-3.2.0-3-4kc-malta-di nbd-modules-3.2.0-3-4kc-malta-di squashfs-modules-3.2.0-3-4kc-malta-di virtio-modules-3.2.0-3-4kc-malta-di zlib-modules-3.2.0-3-4kc-malta-di udf-modules-3.2.0-3-4kc-malta-di kernel-image-3.2.0-3-loongson-2f-di nic-modules-3.2.0-3-loongson-2f-di nic-shared-modules-3.2.0-3-loongson-2f-di ppp-modules-3.2.0-3-loongson-2f-di cdrom-core-modules-3.2.0-3-loongson-2f-di loop-modules-3.2.0-3-loongson-2f-di ipv6-modules-3.2.0-3-loongson-2f-di btrfs-modules-3.2.0-3-loongson-2f-di isofs-modules-3.2.0-3-loongson-2f-di jfs-modules-3.2.0-3-loongson-2f-di reiserfs-modules-3.2.0-3-loongson-2f-di xfs-modules-3.2.0-3-loongson-2f-di fat-modules-3.2.0-3-loongson-2f-di md-modules-3.2.0-3-loongson-2f-di multipath-modules-3.2.0-3-loongson-2f-di usb-modules-3.2.0-3-loongson-2f-di usb-storage-modules-3.2.0-3-loongson-2f-di input-modules-3.2.0-3-loongson-2f-di nic-usb-modules-3.2.0-3-loongson-2f-di sata-modules-3.2.0-3-loongson-2f-di crypto-modules-3.2.0-3-loongson-2f-di crypto-dm-modules-3.2.0-3-loongson-2f-di nbd-modules-3.2.0-3-loongson-2f-di squashfs-modules-3.2.0-3-loongson-2f-di virtio-modules-3.2.0-3-loongson-2f-di zlib-modules-3.2.0-3-loongson-2f-di udf-modules-3.2.0-3-loongson-2f-di' + $(MAKE) -f debian/rules.real install-udeb_mipsel ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sb1-bcm91250a-di nic-shared-modules-3.2.0-3-sb1-bcm91250a-di ppp-modules-3.2.0-3-sb1-bcm91250a-di cdrom-core-modules-3.2.0-3-sb1-bcm91250a-di scsi-core-modules-3.2.0-3-sb1-bcm91250a-di scsi-modules-3.2.0-3-sb1-bcm91250a-di scsi-common-modules-3.2.0-3-sb1-bcm91250a-di loop-modules-3.2.0-3-sb1-bcm91250a-di ipv6-modules-3.2.0-3-sb1-bcm91250a-di btrfs-modules-3.2.0-3-sb1-bcm91250a-di isofs-modules-3.2.0-3-sb1-bcm91250a-di jfs-modules-3.2.0-3-sb1-bcm91250a-di reiserfs-modules-3.2.0-3-sb1-bcm91250a-di xfs-modules-3.2.0-3-sb1-bcm91250a-di fat-modules-3.2.0-3-sb1-bcm91250a-di md-modules-3.2.0-3-sb1-bcm91250a-di multipath-modules-3.2.0-3-sb1-bcm91250a-di usb-modules-3.2.0-3-sb1-bcm91250a-di usb-storage-modules-3.2.0-3-sb1-bcm91250a-di fb-modules-3.2.0-3-sb1-bcm91250a-di input-modules-3.2.0-3-sb1-bcm91250a-di sata-modules-3.2.0-3-sb1-bcm91250a-di crypto-modules-3.2.0-3-sb1-bcm91250a-di crypto-dm-modules-3.2.0-3-sb1-bcm91250a-di nbd-modules-3.2.0-3-sb1-bcm91250a-di squashfs-modules-3.2.0-3-sb1-bcm91250a-di rtc-modules-3.2.0-3-sb1-bcm91250a-di zlib-modules-3.2.0-3-sb1-bcm91250a-di udf-modules-3.2.0-3-sb1-bcm91250a-di kernel-image-3.2.0-3-r5k-cobalt-di nic-shared-modules-3.2.0-3-r5k-cobalt-di ppp-modules-3.2.0-3-r5k-cobalt-di loop-modules-3.2.0-3-r5k-cobalt-di ipv6-modules-3.2.0-3-r5k-cobalt-di btrfs-modules-3.2.0-3-r5k-cobalt-di jfs-modules-3.2.0-3-r5k-cobalt-di reiserfs-modules-3.2.0-3-r5k-cobalt-di xfs-modules-3.2.0-3-r5k-cobalt-di fat-modules-3.2.0-3-r5k-cobalt-di nfs-modules-3.2.0-3-r5k-cobalt-di md-modules-3.2.0-3-r5k-cobalt-di multipath-modules-3.2.0-3-r5k-cobalt-di crypto-modules-3.2.0-3-r5k-cobalt-di crypto-dm-modules-3.2.0-3-r5k-cobalt-di nbd-modules-3.2.0-3-r5k-cobalt-di squashfs-modules-3.2.0-3-r5k-cobalt-di zlib-modules-3.2.0-3-r5k-cobalt-di kernel-image-3.2.0-3-4kc-malta-di ppp-modules-3.2.0-3-4kc-malta-di cdrom-core-modules-3.2.0-3-4kc-malta-di loop-modules-3.2.0-3-4kc-malta-di ipv6-modules-3.2.0-3-4kc-malta-di btrfs-modules-3.2.0-3-4kc-malta-di isofs-modules-3.2.0-3-4kc-malta-di jfs-modules-3.2.0-3-4kc-malta-di reiserfs-modules-3.2.0-3-4kc-malta-di xfs-modules-3.2.0-3-4kc-malta-di fat-modules-3.2.0-3-4kc-malta-di md-modules-3.2.0-3-4kc-malta-di multipath-modules-3.2.0-3-4kc-malta-di usb-modules-3.2.0-3-4kc-malta-di usb-storage-modules-3.2.0-3-4kc-malta-di input-modules-3.2.0-3-4kc-malta-di sata-modules-3.2.0-3-4kc-malta-di crypto-modules-3.2.0-3-4kc-malta-di crypto-dm-modules-3.2.0-3-4kc-malta-di nbd-modules-3.2.0-3-4kc-malta-di squashfs-modules-3.2.0-3-4kc-malta-di virtio-modules-3.2.0-3-4kc-malta-di zlib-modules-3.2.0-3-4kc-malta-di udf-modules-3.2.0-3-4kc-malta-di kernel-image-3.2.0-3-loongson-2f-di nic-modules-3.2.0-3-loongson-2f-di nic-shared-modules-3.2.0-3-loongson-2f-di ppp-modules-3.2.0-3-loongson-2f-di cdrom-core-modules-3.2.0-3-loongson-2f-di loop-modules-3.2.0-3-loongson-2f-di ipv6-modules-3.2.0-3-loongson-2f-di btrfs-modules-3.2.0-3-loongson-2f-di isofs-modules-3.2.0-3-loongson-2f-di jfs-modules-3.2.0-3-loongson-2f-di reiserfs-modules-3.2.0-3-loongson-2f-di xfs-modules-3.2.0-3-loongson-2f-di fat-modules-3.2.0-3-loongson-2f-di md-modules-3.2.0-3-loongson-2f-di multipath-modules-3.2.0-3-loongson-2f-di usb-modules-3.2.0-3-loongson-2f-di usb-storage-modules-3.2.0-3-loongson-2f-di input-modules-3.2.0-3-loongson-2f-di nic-usb-modules-3.2.0-3-loongson-2f-di sata-modules-3.2.0-3-loongson-2f-di crypto-modules-3.2.0-3-loongson-2f-di crypto-dm-modules-3.2.0-3-loongson-2f-di nbd-modules-3.2.0-3-loongson-2f-di squashfs-modules-3.2.0-3-loongson-2f-di virtio-modules-3.2.0-3-loongson-2f-di zlib-modules-3.2.0-3-loongson-2f-di udf-modules-3.2.0-3-loongson-2f-di' binary-arch_mipsel_none: binary-arch_mipsel_none_4kc-malta binary-arch_mipsel_none_5kc-malta binary-arch_mipsel_none_loongson-2f binary-arch_mipsel_none_r5k-cobalt binary-arch_mipsel_none_real binary-arch_mipsel_none_sb1-bcm91250a binary-arch_mipsel_none_sb1a-bcm91480b binary-arch_mipsel_none_4kc-malta: binary-arch_mipsel_none_4kc-malta_real binary-arch_mipsel_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mipsel_none_5kc-malta: binary-arch_mipsel_none_5kc-malta_real binary-arch_mipsel_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mipsel_none_loongson-2f: binary-arch_mipsel_none_loongson-2f_real binary-arch_mipsel_none_loongson-2f_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='loongson-2f' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.loongson-2f' KERNEL_ARCH='mips' LOCALVERSION='-loongson-2f' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-2f' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='loongson-2f' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.loongson-2f' KERNEL_ARCH='mips' LOCALVERSION='-loongson-2f' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-2f' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mipsel_none_r5k-cobalt: binary-arch_mipsel_none_r5k-cobalt_real binary-arch_mipsel_none_r5k-cobalt_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-cobalt' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.r5k-cobalt' KERNEL_ARCH='mips' LOCALVERSION='-r5k-cobalt' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-cobalt' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-cobalt' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.r5k-cobalt' KERNEL_ARCH='mips' LOCALVERSION='-r5k-cobalt' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-cobalt' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mipsel_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' FEATURESET='none' KERNEL_ARCH='mips' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' FEATURESET='none' KERNEL_ARCH='mips' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mipsel_none_sb1-bcm91250a: binary-arch_mipsel_none_sb1-bcm91250a_real binary-arch_mipsel_none_sb1-bcm91250a_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mipsel_none_sb1a-bcm91480b: binary-arch_mipsel_none_sb1a-bcm91480b_real binary-arch_mipsel_none_sb1a-bcm91480b_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_mipsel_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_powerpc:: binary-arch_powerpc_none binary-arch_powerpc_real binary-arch_powerpc:: - $(MAKE) -f debian/rules.real install-udeb_powerpc ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-powerpc-di nic-modules-3.2.0-3-powerpc-di nic-extra-modules-3.2.0-3-powerpc-di nic-shared-modules-3.2.0-3-powerpc-di serial-modules-3.2.0-3-powerpc-di usb-serial-modules-3.2.0-3-powerpc-di ppp-modules-3.2.0-3-powerpc-di pata-modules-3.2.0-3-powerpc-di cdrom-core-modules-3.2.0-3-powerpc-di firewire-core-modules-3.2.0-3-powerpc-di scsi-core-modules-3.2.0-3-powerpc-di scsi-modules-3.2.0-3-powerpc-di scsi-common-modules-3.2.0-3-powerpc-di scsi-extra-modules-3.2.0-3-powerpc-di floppy-modules-3.2.0-3-powerpc-di loop-modules-3.2.0-3-powerpc-di btrfs-modules-3.2.0-3-powerpc-di ext2-modules-3.2.0-3-powerpc-di ext3-modules-3.2.0-3-powerpc-di ext4-modules-3.2.0-3-powerpc-di isofs-modules-3.2.0-3-powerpc-di jfs-modules-3.2.0-3-powerpc-di reiserfs-modules-3.2.0-3-powerpc-di xfs-modules-3.2.0-3-powerpc-di fat-modules-3.2.0-3-powerpc-di hfs-modules-3.2.0-3-powerpc-di affs-modules-3.2.0-3-powerpc-di ufs-modules-3.2.0-3-powerpc-di md-modules-3.2.0-3-powerpc-di multipath-modules-3.2.0-3-powerpc-di usb-modules-3.2.0-3-powerpc-di usb-storage-modules-3.2.0-3-powerpc-di pcmcia-storage-modules-3.2.0-3-powerpc-di input-modules-3.2.0-3-powerpc-di event-modules-3.2.0-3-powerpc-di mouse-modules-3.2.0-3-powerpc-di irda-modules-3.2.0-3-powerpc-di nic-pcmcia-modules-3.2.0-3-powerpc-di pcmcia-modules-3.2.0-3-powerpc-di sata-modules-3.2.0-3-powerpc-di core-modules-3.2.0-3-powerpc-di crc-modules-3.2.0-3-powerpc-di crypto-modules-3.2.0-3-powerpc-di crypto-dm-modules-3.2.0-3-powerpc-di ata-modules-3.2.0-3-powerpc-di nbd-modules-3.2.0-3-powerpc-di squashfs-modules-3.2.0-3-powerpc-di virtio-modules-3.2.0-3-powerpc-di uinput-modules-3.2.0-3-powerpc-di zlib-modules-3.2.0-3-powerpc-di udf-modules-3.2.0-3-powerpc-di kernel-image-3.2.0-3-powerpc64-di nic-modules-3.2.0-3-powerpc64-di nic-extra-modules-3.2.0-3-powerpc64-di nic-shared-modules-3.2.0-3-powerpc64-di serial-modules-3.2.0-3-powerpc64-di usb-serial-modules-3.2.0-3-powerpc64-di ppp-modules-3.2.0-3-powerpc64-di pata-modules-3.2.0-3-powerpc64-di cdrom-core-modules-3.2.0-3-powerpc64-di firewire-core-modules-3.2.0-3-powerpc64-di scsi-core-modules-3.2.0-3-powerpc64-di scsi-modules-3.2.0-3-powerpc64-di scsi-common-modules-3.2.0-3-powerpc64-di scsi-extra-modules-3.2.0-3-powerpc64-di floppy-modules-3.2.0-3-powerpc64-di loop-modules-3.2.0-3-powerpc64-di btrfs-modules-3.2.0-3-powerpc64-di ext2-modules-3.2.0-3-powerpc64-di ext3-modules-3.2.0-3-powerpc64-di ext4-modules-3.2.0-3-powerpc64-di isofs-modules-3.2.0-3-powerpc64-di jfs-modules-3.2.0-3-powerpc64-di reiserfs-modules-3.2.0-3-powerpc64-di xfs-modules-3.2.0-3-powerpc64-di fat-modules-3.2.0-3-powerpc64-di hfs-modules-3.2.0-3-powerpc64-di affs-modules-3.2.0-3-powerpc64-di ufs-modules-3.2.0-3-powerpc64-di md-modules-3.2.0-3-powerpc64-di multipath-modules-3.2.0-3-powerpc64-di usb-modules-3.2.0-3-powerpc64-di usb-storage-modules-3.2.0-3-powerpc64-di pcmcia-storage-modules-3.2.0-3-powerpc64-di input-modules-3.2.0-3-powerpc64-di event-modules-3.2.0-3-powerpc64-di mouse-modules-3.2.0-3-powerpc64-di irda-modules-3.2.0-3-powerpc64-di nic-pcmcia-modules-3.2.0-3-powerpc64-di pcmcia-modules-3.2.0-3-powerpc64-di sata-modules-3.2.0-3-powerpc64-di core-modules-3.2.0-3-powerpc64-di crc-modules-3.2.0-3-powerpc64-di crypto-modules-3.2.0-3-powerpc64-di crypto-dm-modules-3.2.0-3-powerpc64-di ata-modules-3.2.0-3-powerpc64-di nbd-modules-3.2.0-3-powerpc64-di squashfs-modules-3.2.0-3-powerpc64-di virtio-modules-3.2.0-3-powerpc64-di uinput-modules-3.2.0-3-powerpc64-di udf-modules-3.2.0-3-powerpc64-di hypervisor-modules-3.2.0-3-powerpc64-di fancontrol-modules-3.2.0-3-powerpc64-di' + $(MAKE) -f debian/rules.real install-udeb_powerpc ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-powerpc-di nic-modules-3.2.0-3-powerpc-di nic-extra-modules-3.2.0-3-powerpc-di nic-shared-modules-3.2.0-3-powerpc-di serial-modules-3.2.0-3-powerpc-di usb-serial-modules-3.2.0-3-powerpc-di ppp-modules-3.2.0-3-powerpc-di pata-modules-3.2.0-3-powerpc-di cdrom-core-modules-3.2.0-3-powerpc-di firewire-core-modules-3.2.0-3-powerpc-di scsi-core-modules-3.2.0-3-powerpc-di scsi-modules-3.2.0-3-powerpc-di scsi-common-modules-3.2.0-3-powerpc-di scsi-extra-modules-3.2.0-3-powerpc-di floppy-modules-3.2.0-3-powerpc-di loop-modules-3.2.0-3-powerpc-di btrfs-modules-3.2.0-3-powerpc-di ext2-modules-3.2.0-3-powerpc-di ext3-modules-3.2.0-3-powerpc-di ext4-modules-3.2.0-3-powerpc-di isofs-modules-3.2.0-3-powerpc-di jfs-modules-3.2.0-3-powerpc-di reiserfs-modules-3.2.0-3-powerpc-di xfs-modules-3.2.0-3-powerpc-di fat-modules-3.2.0-3-powerpc-di hfs-modules-3.2.0-3-powerpc-di affs-modules-3.2.0-3-powerpc-di ufs-modules-3.2.0-3-powerpc-di md-modules-3.2.0-3-powerpc-di multipath-modules-3.2.0-3-powerpc-di usb-modules-3.2.0-3-powerpc-di usb-storage-modules-3.2.0-3-powerpc-di pcmcia-storage-modules-3.2.0-3-powerpc-di input-modules-3.2.0-3-powerpc-di event-modules-3.2.0-3-powerpc-di mouse-modules-3.2.0-3-powerpc-di irda-modules-3.2.0-3-powerpc-di nic-pcmcia-modules-3.2.0-3-powerpc-di pcmcia-modules-3.2.0-3-powerpc-di sata-modules-3.2.0-3-powerpc-di core-modules-3.2.0-3-powerpc-di crc-modules-3.2.0-3-powerpc-di crypto-modules-3.2.0-3-powerpc-di crypto-dm-modules-3.2.0-3-powerpc-di ata-modules-3.2.0-3-powerpc-di nbd-modules-3.2.0-3-powerpc-di squashfs-modules-3.2.0-3-powerpc-di virtio-modules-3.2.0-3-powerpc-di uinput-modules-3.2.0-3-powerpc-di zlib-modules-3.2.0-3-powerpc-di udf-modules-3.2.0-3-powerpc-di kernel-image-3.2.0-3-powerpc64-di nic-modules-3.2.0-3-powerpc64-di nic-extra-modules-3.2.0-3-powerpc64-di nic-shared-modules-3.2.0-3-powerpc64-di serial-modules-3.2.0-3-powerpc64-di usb-serial-modules-3.2.0-3-powerpc64-di ppp-modules-3.2.0-3-powerpc64-di pata-modules-3.2.0-3-powerpc64-di cdrom-core-modules-3.2.0-3-powerpc64-di firewire-core-modules-3.2.0-3-powerpc64-di scsi-core-modules-3.2.0-3-powerpc64-di scsi-modules-3.2.0-3-powerpc64-di scsi-common-modules-3.2.0-3-powerpc64-di scsi-extra-modules-3.2.0-3-powerpc64-di floppy-modules-3.2.0-3-powerpc64-di loop-modules-3.2.0-3-powerpc64-di btrfs-modules-3.2.0-3-powerpc64-di ext2-modules-3.2.0-3-powerpc64-di ext3-modules-3.2.0-3-powerpc64-di ext4-modules-3.2.0-3-powerpc64-di isofs-modules-3.2.0-3-powerpc64-di jfs-modules-3.2.0-3-powerpc64-di reiserfs-modules-3.2.0-3-powerpc64-di xfs-modules-3.2.0-3-powerpc64-di fat-modules-3.2.0-3-powerpc64-di hfs-modules-3.2.0-3-powerpc64-di affs-modules-3.2.0-3-powerpc64-di ufs-modules-3.2.0-3-powerpc64-di md-modules-3.2.0-3-powerpc64-di multipath-modules-3.2.0-3-powerpc64-di usb-modules-3.2.0-3-powerpc64-di usb-storage-modules-3.2.0-3-powerpc64-di pcmcia-storage-modules-3.2.0-3-powerpc64-di input-modules-3.2.0-3-powerpc64-di event-modules-3.2.0-3-powerpc64-di mouse-modules-3.2.0-3-powerpc64-di irda-modules-3.2.0-3-powerpc64-di nic-pcmcia-modules-3.2.0-3-powerpc64-di pcmcia-modules-3.2.0-3-powerpc64-di sata-modules-3.2.0-3-powerpc64-di core-modules-3.2.0-3-powerpc64-di crc-modules-3.2.0-3-powerpc64-di crypto-modules-3.2.0-3-powerpc64-di crypto-dm-modules-3.2.0-3-powerpc64-di ata-modules-3.2.0-3-powerpc64-di nbd-modules-3.2.0-3-powerpc64-di squashfs-modules-3.2.0-3-powerpc64-di virtio-modules-3.2.0-3-powerpc64-di uinput-modules-3.2.0-3-powerpc64-di udf-modules-3.2.0-3-powerpc64-di hypervisor-modules-3.2.0-3-powerpc64-di fancontrol-modules-3.2.0-3-powerpc64-di' binary-arch_powerpc_none: binary-arch_powerpc_none_powerpc binary-arch_powerpc_none_powerpc-smp binary-arch_powerpc_none_powerpc64 binary-arch_powerpc_none_real binary-arch_powerpc_none_powerpc: binary-arch_powerpc_none_powerpc_real binary-arch_powerpc_none_powerpc-smp: binary-arch_powerpc_none_powerpc-smp_real binary-arch_powerpc_none_powerpc-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc-smp' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc-smp' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_powerpc_none_powerpc64: binary-arch_powerpc_none_powerpc64_real binary-arch_powerpc_none_powerpc64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_powerpc_none_powerpc_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_powerpc_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' FEATURESET='none' KERNEL_ARCH='powerpc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' FEATURESET='none' KERNEL_ARCH='powerpc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_powerpc_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_ppc64:: binary-arch_ppc64_none binary-arch_ppc64_real binary-arch_ppc64:: - $(MAKE) -f debian/rules.real install-udeb_ppc64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-powerpc64-di nic-modules-3.2.0-3-powerpc64-di nic-extra-modules-3.2.0-3-powerpc64-di nic-shared-modules-3.2.0-3-powerpc64-di serial-modules-3.2.0-3-powerpc64-di usb-serial-modules-3.2.0-3-powerpc64-di ppp-modules-3.2.0-3-powerpc64-di pata-modules-3.2.0-3-powerpc64-di cdrom-core-modules-3.2.0-3-powerpc64-di firewire-core-modules-3.2.0-3-powerpc64-di scsi-core-modules-3.2.0-3-powerpc64-di scsi-modules-3.2.0-3-powerpc64-di scsi-common-modules-3.2.0-3-powerpc64-di scsi-extra-modules-3.2.0-3-powerpc64-di floppy-modules-3.2.0-3-powerpc64-di loop-modules-3.2.0-3-powerpc64-di btrfs-modules-3.2.0-3-powerpc64-di ext2-modules-3.2.0-3-powerpc64-di ext3-modules-3.2.0-3-powerpc64-di ext4-modules-3.2.0-3-powerpc64-di isofs-modules-3.2.0-3-powerpc64-di jfs-modules-3.2.0-3-powerpc64-di reiserfs-modules-3.2.0-3-powerpc64-di xfs-modules-3.2.0-3-powerpc64-di fat-modules-3.2.0-3-powerpc64-di hfs-modules-3.2.0-3-powerpc64-di affs-modules-3.2.0-3-powerpc64-di ufs-modules-3.2.0-3-powerpc64-di md-modules-3.2.0-3-powerpc64-di multipath-modules-3.2.0-3-powerpc64-di usb-modules-3.2.0-3-powerpc64-di usb-storage-modules-3.2.0-3-powerpc64-di pcmcia-storage-modules-3.2.0-3-powerpc64-di input-modules-3.2.0-3-powerpc64-di event-modules-3.2.0-3-powerpc64-di mouse-modules-3.2.0-3-powerpc64-di irda-modules-3.2.0-3-powerpc64-di nic-pcmcia-modules-3.2.0-3-powerpc64-di pcmcia-modules-3.2.0-3-powerpc64-di sata-modules-3.2.0-3-powerpc64-di core-modules-3.2.0-3-powerpc64-di crc-modules-3.2.0-3-powerpc64-di crypto-modules-3.2.0-3-powerpc64-di crypto-dm-modules-3.2.0-3-powerpc64-di ata-modules-3.2.0-3-powerpc64-di nbd-modules-3.2.0-3-powerpc64-di squashfs-modules-3.2.0-3-powerpc64-di virtio-modules-3.2.0-3-powerpc64-di uinput-modules-3.2.0-3-powerpc64-di udf-modules-3.2.0-3-powerpc64-di hypervisor-modules-3.2.0-3-powerpc64-di fancontrol-modules-3.2.0-3-powerpc64-di' + $(MAKE) -f debian/rules.real install-udeb_ppc64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-powerpc64-di nic-modules-3.2.0-3-powerpc64-di nic-extra-modules-3.2.0-3-powerpc64-di nic-shared-modules-3.2.0-3-powerpc64-di serial-modules-3.2.0-3-powerpc64-di usb-serial-modules-3.2.0-3-powerpc64-di ppp-modules-3.2.0-3-powerpc64-di pata-modules-3.2.0-3-powerpc64-di cdrom-core-modules-3.2.0-3-powerpc64-di firewire-core-modules-3.2.0-3-powerpc64-di scsi-core-modules-3.2.0-3-powerpc64-di scsi-modules-3.2.0-3-powerpc64-di scsi-common-modules-3.2.0-3-powerpc64-di scsi-extra-modules-3.2.0-3-powerpc64-di floppy-modules-3.2.0-3-powerpc64-di loop-modules-3.2.0-3-powerpc64-di btrfs-modules-3.2.0-3-powerpc64-di ext2-modules-3.2.0-3-powerpc64-di ext3-modules-3.2.0-3-powerpc64-di ext4-modules-3.2.0-3-powerpc64-di isofs-modules-3.2.0-3-powerpc64-di jfs-modules-3.2.0-3-powerpc64-di reiserfs-modules-3.2.0-3-powerpc64-di xfs-modules-3.2.0-3-powerpc64-di fat-modules-3.2.0-3-powerpc64-di hfs-modules-3.2.0-3-powerpc64-di affs-modules-3.2.0-3-powerpc64-di ufs-modules-3.2.0-3-powerpc64-di md-modules-3.2.0-3-powerpc64-di multipath-modules-3.2.0-3-powerpc64-di usb-modules-3.2.0-3-powerpc64-di usb-storage-modules-3.2.0-3-powerpc64-di pcmcia-storage-modules-3.2.0-3-powerpc64-di input-modules-3.2.0-3-powerpc64-di event-modules-3.2.0-3-powerpc64-di mouse-modules-3.2.0-3-powerpc64-di irda-modules-3.2.0-3-powerpc64-di nic-pcmcia-modules-3.2.0-3-powerpc64-di pcmcia-modules-3.2.0-3-powerpc64-di sata-modules-3.2.0-3-powerpc64-di core-modules-3.2.0-3-powerpc64-di crc-modules-3.2.0-3-powerpc64-di crypto-modules-3.2.0-3-powerpc64-di crypto-dm-modules-3.2.0-3-powerpc64-di ata-modules-3.2.0-3-powerpc64-di nbd-modules-3.2.0-3-powerpc64-di squashfs-modules-3.2.0-3-powerpc64-di virtio-modules-3.2.0-3-powerpc64-di uinput-modules-3.2.0-3-powerpc64-di udf-modules-3.2.0-3-powerpc64-di hypervisor-modules-3.2.0-3-powerpc64-di fancontrol-modules-3.2.0-3-powerpc64-di' binary-arch_ppc64_none: binary-arch_ppc64_none_powerpc64 binary-arch_ppc64_none_real binary-arch_ppc64_none_powerpc64: binary-arch_ppc64_none_powerpc64_real binary-arch_ppc64_none_powerpc64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_ppc64_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' FEATURESET='none' KERNEL_ARCH='powerpc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' FEATURESET='none' KERNEL_ARCH='powerpc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_ppc64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_s390:: binary-arch_s390_none binary-arch_s390_real binary-arch_s390:: - $(MAKE) -f debian/rules.real install-udeb_s390 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-s390x-di nic-modules-3.2.0-3-s390x-di scsi-core-modules-3.2.0-3-s390x-di scsi-modules-3.2.0-3-s390x-di ext2-modules-3.2.0-3-s390x-di ext3-modules-3.2.0-3-s390x-di ext4-modules-3.2.0-3-s390x-di xfs-modules-3.2.0-3-s390x-di fat-modules-3.2.0-3-s390x-di md-modules-3.2.0-3-s390x-di multipath-modules-3.2.0-3-s390x-di core-modules-3.2.0-3-s390x-di crypto-modules-3.2.0-3-s390x-di crypto-dm-modules-3.2.0-3-s390x-di nbd-modules-3.2.0-3-s390x-di virtio-modules-3.2.0-3-s390x-di dasd-modules-3.2.0-3-s390x-di dasd-extra-modules-3.2.0-3-s390x-di kernel-image-3.2.0-3-s390x-tape-di' + $(MAKE) -f debian/rules.real install-udeb_s390 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-s390x-di nic-modules-3.2.0-3-s390x-di scsi-core-modules-3.2.0-3-s390x-di scsi-modules-3.2.0-3-s390x-di ext2-modules-3.2.0-3-s390x-di ext3-modules-3.2.0-3-s390x-di ext4-modules-3.2.0-3-s390x-di xfs-modules-3.2.0-3-s390x-di fat-modules-3.2.0-3-s390x-di md-modules-3.2.0-3-s390x-di multipath-modules-3.2.0-3-s390x-di core-modules-3.2.0-3-s390x-di crypto-modules-3.2.0-3-s390x-di crypto-dm-modules-3.2.0-3-s390x-di nbd-modules-3.2.0-3-s390x-di virtio-modules-3.2.0-3-s390x-di dasd-modules-3.2.0-3-s390x-di dasd-extra-modules-3.2.0-3-s390x-di kernel-image-3.2.0-3-s390x-tape-di' binary-arch_s390_none: binary-arch_s390_none_real binary-arch_s390_none_s390x binary-arch_s390_none_s390x-tape binary-arch_s390_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' FEATURESET='none' KERNEL_ARCH='s390' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' FEATURESET='none' KERNEL_ARCH='s390' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_s390_none_s390x: binary-arch_s390_none_s390x_real binary-arch_s390_none_s390x-tape: binary-arch_s390_none_s390x-tape_real binary-arch_s390_none_s390x-tape_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_s390_none_s390x_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_s390_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_s390x:: binary-arch_s390x_none binary-arch_s390x_real binary-arch_s390x:: - $(MAKE) -f debian/rules.real install-udeb_s390x ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-s390x-di nic-modules-3.2.0-3-s390x-di scsi-core-modules-3.2.0-3-s390x-di scsi-modules-3.2.0-3-s390x-di ext2-modules-3.2.0-3-s390x-di ext3-modules-3.2.0-3-s390x-di ext4-modules-3.2.0-3-s390x-di xfs-modules-3.2.0-3-s390x-di fat-modules-3.2.0-3-s390x-di md-modules-3.2.0-3-s390x-di multipath-modules-3.2.0-3-s390x-di core-modules-3.2.0-3-s390x-di crypto-modules-3.2.0-3-s390x-di crypto-dm-modules-3.2.0-3-s390x-di nbd-modules-3.2.0-3-s390x-di virtio-modules-3.2.0-3-s390x-di dasd-modules-3.2.0-3-s390x-di dasd-extra-modules-3.2.0-3-s390x-di kernel-image-3.2.0-3-s390x-tape-di' + $(MAKE) -f debian/rules.real install-udeb_s390x ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-s390x-di nic-modules-3.2.0-3-s390x-di scsi-core-modules-3.2.0-3-s390x-di scsi-modules-3.2.0-3-s390x-di ext2-modules-3.2.0-3-s390x-di ext3-modules-3.2.0-3-s390x-di ext4-modules-3.2.0-3-s390x-di xfs-modules-3.2.0-3-s390x-di fat-modules-3.2.0-3-s390x-di md-modules-3.2.0-3-s390x-di multipath-modules-3.2.0-3-s390x-di core-modules-3.2.0-3-s390x-di crypto-modules-3.2.0-3-s390x-di crypto-dm-modules-3.2.0-3-s390x-di nbd-modules-3.2.0-3-s390x-di virtio-modules-3.2.0-3-s390x-di dasd-modules-3.2.0-3-s390x-di dasd-extra-modules-3.2.0-3-s390x-di kernel-image-3.2.0-3-s390x-tape-di' binary-arch_s390x_none: binary-arch_s390x_none_real binary-arch_s390x_none_s390x binary-arch_s390x_none_s390x-tape binary-arch_s390x_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' FEATURESET='none' KERNEL_ARCH='s390' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' FEATURESET='none' KERNEL_ARCH='s390' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_s390x_none_s390x: binary-arch_s390x_none_s390x_real binary-arch_s390x_none_s390x-tape: binary-arch_s390x_none_s390x-tape_real binary-arch_s390x_none_s390x-tape_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_s390x_none_s390x_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_s390x_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sh4:: binary-arch_sh4_none binary-arch_sh4_real binary-arch_sh4:: - $(MAKE) -f debian/rules.real install-udeb_sh4 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sh7751r-di nic-modules-3.2.0-3-sh7751r-di usb-serial-modules-3.2.0-3-sh7751r-di ppp-modules-3.2.0-3-sh7751r-di pata-modules-3.2.0-3-sh7751r-di cdrom-core-modules-3.2.0-3-sh7751r-di firewire-core-modules-3.2.0-3-sh7751r-di scsi-core-modules-3.2.0-3-sh7751r-di loop-modules-3.2.0-3-sh7751r-di ipv6-modules-3.2.0-3-sh7751r-di btrfs-modules-3.2.0-3-sh7751r-di ext2-modules-3.2.0-3-sh7751r-di ext4-modules-3.2.0-3-sh7751r-di isofs-modules-3.2.0-3-sh7751r-di jfs-modules-3.2.0-3-sh7751r-di reiserfs-modules-3.2.0-3-sh7751r-di xfs-modules-3.2.0-3-sh7751r-di fat-modules-3.2.0-3-sh7751r-di ufs-modules-3.2.0-3-sh7751r-di minix-modules-3.2.0-3-sh7751r-di md-modules-3.2.0-3-sh7751r-di multipath-modules-3.2.0-3-sh7751r-di usb-storage-modules-3.2.0-3-sh7751r-di parport-modules-3.2.0-3-sh7751r-di nic-usb-modules-3.2.0-3-sh7751r-di sata-modules-3.2.0-3-sh7751r-di i2c-modules-3.2.0-3-sh7751r-di crc-modules-3.2.0-3-sh7751r-di crypto-modules-3.2.0-3-sh7751r-di crypto-dm-modules-3.2.0-3-sh7751r-di nbd-modules-3.2.0-3-sh7751r-di squashfs-modules-3.2.0-3-sh7751r-di speakup-modules-3.2.0-3-sh7751r-di virtio-modules-3.2.0-3-sh7751r-di sound-modules-3.2.0-3-sh7751r-di zlib-modules-3.2.0-3-sh7751r-di udf-modules-3.2.0-3-sh7751r-di kernel-image-3.2.0-3-sh7785lcr-di nic-modules-3.2.0-3-sh7785lcr-di usb-serial-modules-3.2.0-3-sh7785lcr-di ppp-modules-3.2.0-3-sh7785lcr-di pata-modules-3.2.0-3-sh7785lcr-di cdrom-core-modules-3.2.0-3-sh7785lcr-di firewire-core-modules-3.2.0-3-sh7785lcr-di scsi-core-modules-3.2.0-3-sh7785lcr-di loop-modules-3.2.0-3-sh7785lcr-di ipv6-modules-3.2.0-3-sh7785lcr-di btrfs-modules-3.2.0-3-sh7785lcr-di ext2-modules-3.2.0-3-sh7785lcr-di ext4-modules-3.2.0-3-sh7785lcr-di isofs-modules-3.2.0-3-sh7785lcr-di jfs-modules-3.2.0-3-sh7785lcr-di reiserfs-modules-3.2.0-3-sh7785lcr-di xfs-modules-3.2.0-3-sh7785lcr-di fat-modules-3.2.0-3-sh7785lcr-di ufs-modules-3.2.0-3-sh7785lcr-di minix-modules-3.2.0-3-sh7785lcr-di md-modules-3.2.0-3-sh7785lcr-di multipath-modules-3.2.0-3-sh7785lcr-di parport-modules-3.2.0-3-sh7785lcr-di nic-usb-modules-3.2.0-3-sh7785lcr-di sata-modules-3.2.0-3-sh7785lcr-di crc-modules-3.2.0-3-sh7785lcr-di crypto-modules-3.2.0-3-sh7785lcr-di crypto-dm-modules-3.2.0-3-sh7785lcr-di nbd-modules-3.2.0-3-sh7785lcr-di squashfs-modules-3.2.0-3-sh7785lcr-di speakup-modules-3.2.0-3-sh7785lcr-di sound-modules-3.2.0-3-sh7785lcr-di zlib-modules-3.2.0-3-sh7785lcr-di udf-modules-3.2.0-3-sh7785lcr-di' + $(MAKE) -f debian/rules.real install-udeb_sh4 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sh7751r-di nic-modules-3.2.0-3-sh7751r-di usb-serial-modules-3.2.0-3-sh7751r-di ppp-modules-3.2.0-3-sh7751r-di pata-modules-3.2.0-3-sh7751r-di cdrom-core-modules-3.2.0-3-sh7751r-di firewire-core-modules-3.2.0-3-sh7751r-di scsi-core-modules-3.2.0-3-sh7751r-di loop-modules-3.2.0-3-sh7751r-di ipv6-modules-3.2.0-3-sh7751r-di btrfs-modules-3.2.0-3-sh7751r-di ext2-modules-3.2.0-3-sh7751r-di ext4-modules-3.2.0-3-sh7751r-di isofs-modules-3.2.0-3-sh7751r-di jfs-modules-3.2.0-3-sh7751r-di reiserfs-modules-3.2.0-3-sh7751r-di xfs-modules-3.2.0-3-sh7751r-di fat-modules-3.2.0-3-sh7751r-di ufs-modules-3.2.0-3-sh7751r-di minix-modules-3.2.0-3-sh7751r-di md-modules-3.2.0-3-sh7751r-di multipath-modules-3.2.0-3-sh7751r-di usb-storage-modules-3.2.0-3-sh7751r-di parport-modules-3.2.0-3-sh7751r-di nic-usb-modules-3.2.0-3-sh7751r-di sata-modules-3.2.0-3-sh7751r-di i2c-modules-3.2.0-3-sh7751r-di crc-modules-3.2.0-3-sh7751r-di crypto-modules-3.2.0-3-sh7751r-di crypto-dm-modules-3.2.0-3-sh7751r-di nbd-modules-3.2.0-3-sh7751r-di squashfs-modules-3.2.0-3-sh7751r-di speakup-modules-3.2.0-3-sh7751r-di virtio-modules-3.2.0-3-sh7751r-di sound-modules-3.2.0-3-sh7751r-di zlib-modules-3.2.0-3-sh7751r-di udf-modules-3.2.0-3-sh7751r-di kernel-image-3.2.0-3-sh7785lcr-di nic-modules-3.2.0-3-sh7785lcr-di usb-serial-modules-3.2.0-3-sh7785lcr-di ppp-modules-3.2.0-3-sh7785lcr-di pata-modules-3.2.0-3-sh7785lcr-di cdrom-core-modules-3.2.0-3-sh7785lcr-di firewire-core-modules-3.2.0-3-sh7785lcr-di scsi-core-modules-3.2.0-3-sh7785lcr-di loop-modules-3.2.0-3-sh7785lcr-di ipv6-modules-3.2.0-3-sh7785lcr-di btrfs-modules-3.2.0-3-sh7785lcr-di ext2-modules-3.2.0-3-sh7785lcr-di ext4-modules-3.2.0-3-sh7785lcr-di isofs-modules-3.2.0-3-sh7785lcr-di jfs-modules-3.2.0-3-sh7785lcr-di reiserfs-modules-3.2.0-3-sh7785lcr-di xfs-modules-3.2.0-3-sh7785lcr-di fat-modules-3.2.0-3-sh7785lcr-di ufs-modules-3.2.0-3-sh7785lcr-di minix-modules-3.2.0-3-sh7785lcr-di md-modules-3.2.0-3-sh7785lcr-di multipath-modules-3.2.0-3-sh7785lcr-di parport-modules-3.2.0-3-sh7785lcr-di nic-usb-modules-3.2.0-3-sh7785lcr-di sata-modules-3.2.0-3-sh7785lcr-di crc-modules-3.2.0-3-sh7785lcr-di crypto-modules-3.2.0-3-sh7785lcr-di crypto-dm-modules-3.2.0-3-sh7785lcr-di nbd-modules-3.2.0-3-sh7785lcr-di squashfs-modules-3.2.0-3-sh7785lcr-di speakup-modules-3.2.0-3-sh7785lcr-di sound-modules-3.2.0-3-sh7785lcr-di zlib-modules-3.2.0-3-sh7785lcr-di udf-modules-3.2.0-3-sh7785lcr-di' binary-arch_sh4_none: binary-arch_sh4_none_real binary-arch_sh4_none_sh7751r binary-arch_sh4_none_sh7785lcr binary-arch_sh4_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' FEATURESET='none' KERNEL_ARCH='sh' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' FEATURESET='none' KERNEL_ARCH='sh' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sh4_none_sh7751r: binary-arch_sh4_none_sh7751r_real binary-arch_sh4_none_sh7751r_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sh4_none_sh7785lcr: binary-arch_sh4_none_sh7785lcr_real binary-arch_sh4_none_sh7785lcr_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sh4_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sparc:: binary-arch_sparc_none binary-arch_sparc_real binary-arch_sparc:: - $(MAKE) -f debian/rules.real install-udeb_sparc ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sparc64-di nic-modules-3.2.0-3-sparc64-di ppp-modules-3.2.0-3-sparc64-di pata-modules-3.2.0-3-sparc64-di cdrom-core-modules-3.2.0-3-sparc64-di scsi-core-modules-3.2.0-3-sparc64-di scsi-modules-3.2.0-3-sparc64-di scsi-common-modules-3.2.0-3-sparc64-di plip-modules-3.2.0-3-sparc64-di btrfs-modules-3.2.0-3-sparc64-di ext2-modules-3.2.0-3-sparc64-di ext3-modules-3.2.0-3-sparc64-di ext4-modules-3.2.0-3-sparc64-di isofs-modules-3.2.0-3-sparc64-di jfs-modules-3.2.0-3-sparc64-di reiserfs-modules-3.2.0-3-sparc64-di xfs-modules-3.2.0-3-sparc64-di fat-modules-3.2.0-3-sparc64-di md-modules-3.2.0-3-sparc64-di multipath-modules-3.2.0-3-sparc64-di usb-modules-3.2.0-3-sparc64-di usb-storage-modules-3.2.0-3-sparc64-di input-modules-3.2.0-3-sparc64-di sata-modules-3.2.0-3-sparc64-di core-modules-3.2.0-3-sparc64-di crypto-modules-3.2.0-3-sparc64-di crypto-dm-modules-3.2.0-3-sparc64-di ata-modules-3.2.0-3-sparc64-di nbd-modules-3.2.0-3-sparc64-di squashfs-modules-3.2.0-3-sparc64-di virtio-modules-3.2.0-3-sparc64-di zlib-modules-3.2.0-3-sparc64-di udf-modules-3.2.0-3-sparc64-di' + $(MAKE) -f debian/rules.real install-udeb_sparc ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sparc64-di nic-modules-3.2.0-3-sparc64-di ppp-modules-3.2.0-3-sparc64-di pata-modules-3.2.0-3-sparc64-di cdrom-core-modules-3.2.0-3-sparc64-di scsi-core-modules-3.2.0-3-sparc64-di scsi-modules-3.2.0-3-sparc64-di scsi-common-modules-3.2.0-3-sparc64-di plip-modules-3.2.0-3-sparc64-di btrfs-modules-3.2.0-3-sparc64-di ext2-modules-3.2.0-3-sparc64-di ext3-modules-3.2.0-3-sparc64-di ext4-modules-3.2.0-3-sparc64-di isofs-modules-3.2.0-3-sparc64-di jfs-modules-3.2.0-3-sparc64-di reiserfs-modules-3.2.0-3-sparc64-di xfs-modules-3.2.0-3-sparc64-di fat-modules-3.2.0-3-sparc64-di md-modules-3.2.0-3-sparc64-di multipath-modules-3.2.0-3-sparc64-di usb-modules-3.2.0-3-sparc64-di usb-storage-modules-3.2.0-3-sparc64-di input-modules-3.2.0-3-sparc64-di sata-modules-3.2.0-3-sparc64-di core-modules-3.2.0-3-sparc64-di crypto-modules-3.2.0-3-sparc64-di crypto-dm-modules-3.2.0-3-sparc64-di ata-modules-3.2.0-3-sparc64-di nbd-modules-3.2.0-3-sparc64-di squashfs-modules-3.2.0-3-sparc64-di virtio-modules-3.2.0-3-sparc64-di zlib-modules-3.2.0-3-sparc64-di udf-modules-3.2.0-3-sparc64-di' binary-arch_sparc64:: binary-arch_sparc64_none binary-arch_sparc64_real binary-arch_sparc64:: - $(MAKE) -f debian/rules.real install-udeb_sparc64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sparc64-di nic-modules-3.2.0-3-sparc64-di ppp-modules-3.2.0-3-sparc64-di pata-modules-3.2.0-3-sparc64-di cdrom-core-modules-3.2.0-3-sparc64-di scsi-core-modules-3.2.0-3-sparc64-di scsi-modules-3.2.0-3-sparc64-di scsi-common-modules-3.2.0-3-sparc64-di plip-modules-3.2.0-3-sparc64-di btrfs-modules-3.2.0-3-sparc64-di ext2-modules-3.2.0-3-sparc64-di ext3-modules-3.2.0-3-sparc64-di ext4-modules-3.2.0-3-sparc64-di isofs-modules-3.2.0-3-sparc64-di jfs-modules-3.2.0-3-sparc64-di reiserfs-modules-3.2.0-3-sparc64-di xfs-modules-3.2.0-3-sparc64-di fat-modules-3.2.0-3-sparc64-di md-modules-3.2.0-3-sparc64-di multipath-modules-3.2.0-3-sparc64-di usb-modules-3.2.0-3-sparc64-di usb-storage-modules-3.2.0-3-sparc64-di input-modules-3.2.0-3-sparc64-di sata-modules-3.2.0-3-sparc64-di core-modules-3.2.0-3-sparc64-di crypto-modules-3.2.0-3-sparc64-di crypto-dm-modules-3.2.0-3-sparc64-di ata-modules-3.2.0-3-sparc64-di nbd-modules-3.2.0-3-sparc64-di squashfs-modules-3.2.0-3-sparc64-di virtio-modules-3.2.0-3-sparc64-di zlib-modules-3.2.0-3-sparc64-di udf-modules-3.2.0-3-sparc64-di' + $(MAKE) -f debian/rules.real install-udeb_sparc64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' PACKAGE_NAMES='kernel-image-3.2.0-3-sparc64-di nic-modules-3.2.0-3-sparc64-di ppp-modules-3.2.0-3-sparc64-di pata-modules-3.2.0-3-sparc64-di cdrom-core-modules-3.2.0-3-sparc64-di scsi-core-modules-3.2.0-3-sparc64-di scsi-modules-3.2.0-3-sparc64-di scsi-common-modules-3.2.0-3-sparc64-di plip-modules-3.2.0-3-sparc64-di btrfs-modules-3.2.0-3-sparc64-di ext2-modules-3.2.0-3-sparc64-di ext3-modules-3.2.0-3-sparc64-di ext4-modules-3.2.0-3-sparc64-di isofs-modules-3.2.0-3-sparc64-di jfs-modules-3.2.0-3-sparc64-di reiserfs-modules-3.2.0-3-sparc64-di xfs-modules-3.2.0-3-sparc64-di fat-modules-3.2.0-3-sparc64-di md-modules-3.2.0-3-sparc64-di multipath-modules-3.2.0-3-sparc64-di usb-modules-3.2.0-3-sparc64-di usb-storage-modules-3.2.0-3-sparc64-di input-modules-3.2.0-3-sparc64-di sata-modules-3.2.0-3-sparc64-di core-modules-3.2.0-3-sparc64-di crypto-modules-3.2.0-3-sparc64-di crypto-dm-modules-3.2.0-3-sparc64-di ata-modules-3.2.0-3-sparc64-di nbd-modules-3.2.0-3-sparc64-di squashfs-modules-3.2.0-3-sparc64-di virtio-modules-3.2.0-3-sparc64-di zlib-modules-3.2.0-3-sparc64-di udf-modules-3.2.0-3-sparc64-di' binary-arch_sparc64_none: binary-arch_sparc64_none_real binary-arch_sparc64_none_sparc64 binary-arch_sparc64_none_sparc64-smp binary-arch_sparc64_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' FEATURESET='none' KERNEL_ARCH='sparc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' FEATURESET='none' KERNEL_ARCH='sparc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sparc64_none_sparc64: binary-arch_sparc64_none_sparc64_real binary-arch_sparc64_none_sparc64-smp: binary-arch_sparc64_none_sparc64-smp_real binary-arch_sparc64_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sparc64_none_sparc64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sparc64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sparc_none: binary-arch_sparc_none_real binary-arch_sparc_none_sparc64 binary-arch_sparc_none_sparc64-smp binary-arch_sparc_none_real:: - $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' FEATURESET='none' KERNEL_ARCH='sparc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' FEATURESET='none' KERNEL_ARCH='sparc' LOCALVERSION_HEADERS='' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sparc_none_sparc64: binary-arch_sparc_none_sparc64_real binary-arch_sparc_none_sparc64-smp: binary-arch_sparc_none_sparc64-smp_real binary-arch_sparc_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sparc_none_sparc64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' binary-arch_sparc_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-indep:: - $(MAKE) -f debian/rules.real binary-indep ABINAME='3.2.0-3' ABINAME_PART='-3' ALL_FEATURESETS='none rt' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real binary-indep ABINAME='3.2.0-3' ABINAME_PART='-3' ALL_FEATURESETS='none rt' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_alpha:: source_none_real binary-libc-dev_alpha:: - $(MAKE) -f debian/rules.real install-libc-dev_alpha ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' KERNEL_ARCH='alpha' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_alpha ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' KERNEL_ARCH='alpha' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_amd64:: source_none_real binary-libc-dev_amd64:: - $(MAKE) -f debian/rules.real install-libc-dev_amd64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_amd64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_armel:: source_none_real binary-libc-dev_armel:: - $(MAKE) -f debian/rules.real install-libc-dev_armel ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_armel ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_armhf:: source_none_real binary-libc-dev_armhf:: - $(MAKE) -f debian/rules.real install-libc-dev_armhf ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_armhf ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_hppa:: source_none_real binary-libc-dev_hppa:: - $(MAKE) -f debian/rules.real install-libc-dev_hppa ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_hppa ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_i386:: source_none_real binary-libc-dev_i386:: - $(MAKE) -f debian/rules.real install-libc-dev_i386 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_i386 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_ia64:: source_none_real binary-libc-dev_ia64:: - $(MAKE) -f debian/rules.real install-libc-dev_ia64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' KERNEL_ARCH='ia64' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_ia64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' KERNEL_ARCH='ia64' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_m68k:: source_none_real binary-libc-dev_m68k:: - $(MAKE) -f debian/rules.real install-libc-dev_m68k ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_m68k ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_mips:: source_none_real binary-libc-dev_mips:: - $(MAKE) -f debian/rules.real install-libc-dev_mips ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_mips ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_mipsel:: source_none_real binary-libc-dev_mipsel:: - $(MAKE) -f debian/rules.real install-libc-dev_mipsel ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_mipsel ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_powerpc:: source_none_real binary-libc-dev_powerpc:: - $(MAKE) -f debian/rules.real install-libc-dev_powerpc ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_powerpc ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_ppc64:: source_none_real binary-libc-dev_ppc64:: - $(MAKE) -f debian/rules.real install-libc-dev_ppc64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_ppc64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_s390:: source_none_real binary-libc-dev_s390:: - $(MAKE) -f debian/rules.real install-libc-dev_s390 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_s390 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_s390x:: source_none_real binary-libc-dev_s390x:: - $(MAKE) -f debian/rules.real install-libc-dev_s390x ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_s390x ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_sh4:: source_none_real binary-libc-dev_sh4:: - $(MAKE) -f debian/rules.real install-libc-dev_sh4 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_sh4 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_sparc:: source_none_real binary-libc-dev_sparc:: - $(MAKE) -f debian/rules.real install-libc-dev_sparc ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_sparc ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' binary-libc-dev_sparc64:: source_none_real binary-libc-dev_sparc64:: - $(MAKE) -f debian/rules.real install-libc-dev_sparc64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real install-libc-dev_sparc64 ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch: build-arch_alpha build-arch_amd64 build-arch_armel build-arch_armhf build-arch_hppa build-arch_i386 build-arch_ia64 build-arch_m68k build-arch_mips build-arch_mipsel build-arch_powerpc build-arch_ppc64 build-arch_s390 build-arch_s390x build-arch_sh4 build-arch_sparc build-arch_sparc64 build-arch_alpha: build-arch_alpha_none build-arch_alpha_real build-arch_alpha_none: build-arch_alpha_none_alpha-generic build-arch_alpha_none_alpha-legacy build-arch_alpha_none_alpha-smp build-arch_alpha_none_real build-arch_alpha_none_alpha-generic: build-arch_alpha_none_alpha-generic_real build-arch_alpha_none_alpha-generic_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_alpha_none_alpha-legacy: build-arch_alpha_none_alpha-legacy_real build-arch_alpha_none_alpha-legacy_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-legacy' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-legacy' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-legacy' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-legacy' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-legacy' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-legacy' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-legacy' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-legacy' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_alpha_none_alpha-smp: build-arch_alpha_none_alpha-smp_real build-arch_alpha_none_alpha-smp_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_alpha_none_real: build-arch_alpha_real: build-arch_amd64: build-arch_amd64_none build-arch_amd64_real build-arch_amd64_rt build-arch_amd64_none: build-arch_amd64_none_amd64 build-arch_amd64_none_real build-arch_amd64_none_amd64: build-arch_amd64_none_amd64_real build-arch_amd64_none_amd64_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_amd64_none_real: build-arch_amd64_real: build-arch_amd64_rt: build-arch_amd64_rt_amd64 build-arch_amd64_rt_real build-arch_amd64_rt_amd64: build-arch_amd64_rt_amd64_real build-arch_amd64_rt_amd64_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64 debian/config/featureset-rt/config' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64 debian/config/featureset-rt/config' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_amd64_rt_real: build-arch_armel: build-arch_armel_none build-arch_armel_real build-arch_armel_none: build-arch_armel_none_iop32x build-arch_armel_none_ixp4xx build-arch_armel_none_kirkwood build-arch_armel_none_mv78xx0 build-arch_armel_none_orion5x build-arch_armel_none_real build-arch_armel_none_versatile build-arch_armel_none_iop32x: build-arch_armel_none_iop32x_real build-arch_armel_none_iop32x_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='iop32x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.iop32x' KERNEL_ARCH='arm' LOCALVERSION='-iop32x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-iop32x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='iop32x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.iop32x' KERNEL_ARCH='arm' LOCALVERSION='-iop32x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-iop32x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_armel_none_ixp4xx: build-arch_armel_none_ixp4xx_real build-arch_armel_none_ixp4xx_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='ixp4xx' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.ixp4xx' KERNEL_ARCH='arm' LOCALVERSION='-ixp4xx' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-ixp4xx' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='ixp4xx' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.ixp4xx' KERNEL_ARCH='arm' LOCALVERSION='-ixp4xx' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-ixp4xx' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_armel_none_kirkwood: build-arch_armel_none_kirkwood_real build-arch_armel_none_kirkwood_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='kirkwood' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.kirkwood' KERNEL_ARCH='arm' LOCALVERSION='-kirkwood' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-kirkwood' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='kirkwood' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.kirkwood' KERNEL_ARCH='arm' LOCALVERSION='-kirkwood' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-kirkwood' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_armel_none_mv78xx0: build-arch_armel_none_mv78xx0_real build-arch_armel_none_mv78xx0_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mv78xx0' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.mv78xx0' KERNEL_ARCH='arm' LOCALVERSION='-mv78xx0' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mv78xx0' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mv78xx0' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.mv78xx0' KERNEL_ARCH='arm' LOCALVERSION='-mv78xx0' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mv78xx0' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_armel_none_orion5x: build-arch_armel_none_orion5x_real build-arch_armel_none_orion5x_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='orion5x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.orion5x' KERNEL_ARCH='arm' LOCALVERSION='-orion5x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-orion5x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='orion5x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.orion5x' KERNEL_ARCH='arm' LOCALVERSION='-orion5x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-orion5x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_armel_none_real: build-arch_armel_none_versatile: build-arch_armel_none_versatile_real build-arch_armel_none_versatile_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='versatile' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.versatile' KERNEL_ARCH='arm' LOCALVERSION='-versatile' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-versatile' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='versatile' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.versatile' KERNEL_ARCH='arm' LOCALVERSION='-versatile' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-versatile' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_armel_real: build-arch_armhf: build-arch_armhf_none build-arch_armhf_real -build-arch_armhf_none: build-arch_armhf_none_mx5 build-arch_armhf_none_omap build-arch_armhf_none_real build-arch_armhf_none_vexpress -build-arch_armhf_none_mx5: build-arch_armhf_none_mx5_real -build-arch_armhf_none_mx5_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mx5' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.mx5' KERNEL_ARCH='arm' LOCALVERSION='-mx5' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mx5' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' -build-arch_armhf_none_omap: build-arch_armhf_none_omap_real -build-arch_armhf_none_omap_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='omap' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.omap' KERNEL_ARCH='arm' LOCALVERSION='-omap' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-omap' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' +build-arch_armhf_none: build-arch_armhf_none_real build-arch_armhf_none_rpi build-arch_armhf_none_real: -build-arch_armhf_none_vexpress: build-arch_armhf_none_vexpress_real -build-arch_armhf_none_vexpress_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='vexpress' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.vexpress' KERNEL_ARCH='arm' LOCALVERSION='-vexpress' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-vexpress' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' +build-arch_armhf_none_rpi: build-arch_armhf_none_rpi_real +build-arch_armhf_none_rpi_real:: + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='rpi' INITRAMFS='False' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.rpi' KERNEL_ARCH='arm' LOCALVERSION='-rpi' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_armhf_real: build-arch_hppa: build-arch_hppa_none build-arch_hppa_real build-arch_hppa_none: build-arch_hppa_none_parisc build-arch_hppa_none_parisc-smp build-arch_hppa_none_parisc64 build-arch_hppa_none_parisc64-smp build-arch_hppa_none_real build-arch_hppa_none_parisc: build-arch_hppa_none_parisc_real build-arch_hppa_none_parisc-smp: build-arch_hppa_none_parisc-smp_real build-arch_hppa_none_parisc-smp_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_hppa_none_parisc64: build-arch_hppa_none_parisc64_real build-arch_hppa_none_parisc64-smp: build-arch_hppa_none_parisc64-smp_real build-arch_hppa_none_parisc64-smp_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_hppa_none_parisc64_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_hppa_none_parisc_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_hppa_none_real: build-arch_hppa_real: build-arch_i386: build-arch_i386_none build-arch_i386_real build-arch_i386_rt build-arch_i386_none: build-arch_i386_none_486 build-arch_i386_none_686-pae build-arch_i386_none_amd64 build-arch_i386_none_real build-arch_i386_none_486: build-arch_i386_none_486_real build-arch_i386_none_486_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='486' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.486' KERNEL_ARCH='x86' LOCALVERSION='-486' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-486' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='486' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.486' KERNEL_ARCH='x86' LOCALVERSION='-486' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-486' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_i386_none_686-pae: build-arch_i386_none_686-pae_real build-arch_i386_none_686-pae_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_i386_none_amd64: build-arch_i386_none_amd64_real build-arch_i386_none_amd64_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_i386_none_real: build-arch_i386_real: build-arch_i386_rt: build-arch_i386_rt_686-pae build-arch_i386_rt_real build-arch_i386_rt_686-pae: build-arch_i386_rt_686-pae_real build-arch_i386_rt_686-pae_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/featureset-rt/config debian/config/i386/rt/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/featureset-rt/config debian/config/i386/rt/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_i386_rt_real: build-arch_ia64: build-arch_ia64_none build-arch_ia64_real build-arch_ia64_none: build-arch_ia64_none_itanium build-arch_ia64_none_mckinley build-arch_ia64_none_real build-arch_ia64_none_itanium: build-arch_ia64_none_itanium_real build-arch_ia64_none_itanium_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='itanium' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.itanium' KERNEL_ARCH='ia64' LOCALVERSION='-itanium' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-itanium' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='itanium' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.itanium' KERNEL_ARCH='ia64' LOCALVERSION='-itanium' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-itanium' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_ia64_none_mckinley: build-arch_ia64_none_mckinley_real build-arch_ia64_none_mckinley_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mckinley' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.mckinley' KERNEL_ARCH='ia64' LOCALVERSION='-mckinley' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mckinley' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mckinley' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.mckinley' KERNEL_ARCH='ia64' LOCALVERSION='-mckinley' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mckinley' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_ia64_none_real: build-arch_ia64_real: build-arch_m68k: build-arch_m68k_none build-arch_m68k_real build-arch_m68k_none: build-arch_m68k_none_amiga build-arch_m68k_none_atari build-arch_m68k_none_bvme6000 build-arch_m68k_none_mac build-arch_m68k_none_mvme147 build-arch_m68k_none_mvme16x build-arch_m68k_none_real build-arch_m68k_none_amiga: build-arch_m68k_none_amiga_real build-arch_m68k_none_amiga_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amiga' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.amiga' KERNEL_ARCH='m68k' LOCALVERSION='-amiga' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amiga' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amiga' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.amiga' KERNEL_ARCH='m68k' LOCALVERSION='-amiga' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amiga' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_m68k_none_atari: build-arch_m68k_none_atari_real build-arch_m68k_none_atari_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='atari' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.atari' KERNEL_ARCH='m68k' LOCALVERSION='-atari' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-atari' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='atari' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.atari' KERNEL_ARCH='m68k' LOCALVERSION='-atari' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-atari' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_m68k_none_bvme6000: build-arch_m68k_none_bvme6000_real build-arch_m68k_none_bvme6000_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='bvme6000' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.bvme6000' KERNEL_ARCH='m68k' LOCALVERSION='-bvme6000' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-bvme6000' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='bvme6000' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.bvme6000' KERNEL_ARCH='m68k' LOCALVERSION='-bvme6000' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-bvme6000' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_m68k_none_mac: build-arch_m68k_none_mac_real build-arch_m68k_none_mac_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mac' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mac' KERNEL_ARCH='m68k' LOCALVERSION='-mac' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mac' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mac' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mac' KERNEL_ARCH='m68k' LOCALVERSION='-mac' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mac' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_m68k_none_mvme147: build-arch_m68k_none_mvme147_real build-arch_m68k_none_mvme147_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme147' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme147' KERNEL_ARCH='m68k' LOCALVERSION='-mvme147' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme147' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme147' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme147' KERNEL_ARCH='m68k' LOCALVERSION='-mvme147' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme147' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_m68k_none_mvme16x: build-arch_m68k_none_mvme16x_real build-arch_m68k_none_mvme16x_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme16x' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme16x' KERNEL_ARCH='m68k' LOCALVERSION='-mvme16x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme16x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme16x' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme16x' KERNEL_ARCH='m68k' LOCALVERSION='-mvme16x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme16x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_m68k_none_real: build-arch_m68k_real: build-arch_mips: build-arch_mips_none build-arch_mips_real build-arch_mips_none: build-arch_mips_none_4kc-malta build-arch_mips_none_5kc-malta build-arch_mips_none_octeon build-arch_mips_none_r4k-ip22 build-arch_mips_none_r5k-ip32 build-arch_mips_none_real build-arch_mips_none_sb1-bcm91250a build-arch_mips_none_sb1a-bcm91480b build-arch_mips_none_4kc-malta: build-arch_mips_none_4kc-malta_real build-arch_mips_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mips_none_5kc-malta: build-arch_mips_none_5kc-malta_real build-arch_mips_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mips_none_octeon: build-arch_mips_none_octeon_real build-arch_mips_none_octeon_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='octeon' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.octeon' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='octeon' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.octeon' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mips_none_r4k-ip22: build-arch_mips_none_r4k-ip22_real build-arch_mips_none_r4k-ip22_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r4k-ip22' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r4k-ip22' KERNEL_ARCH='mips' LOCALVERSION='-r4k-ip22' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r4k-ip22' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r4k-ip22' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r4k-ip22' KERNEL_ARCH='mips' LOCALVERSION='-r4k-ip22' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r4k-ip22' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mips_none_r5k-ip32: build-arch_mips_none_r5k-ip32_real build-arch_mips_none_r5k-ip32_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-ip32' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r5k-ip32' KERNEL_ARCH='mips' LOCALVERSION='-r5k-ip32' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-ip32' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-ip32' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r5k-ip32' KERNEL_ARCH='mips' LOCALVERSION='-r5k-ip32' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-ip32' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mips_none_real: build-arch_mips_none_sb1-bcm91250a: build-arch_mips_none_sb1-bcm91250a_real build-arch_mips_none_sb1-bcm91250a_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mips_none_sb1a-bcm91480b: build-arch_mips_none_sb1a-bcm91480b_real build-arch_mips_none_sb1a-bcm91480b_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mips_real: build-arch_mipsel: build-arch_mipsel_none build-arch_mipsel_real build-arch_mipsel_none: build-arch_mipsel_none_4kc-malta build-arch_mipsel_none_5kc-malta build-arch_mipsel_none_loongson-2f build-arch_mipsel_none_r5k-cobalt build-arch_mipsel_none_real build-arch_mipsel_none_sb1-bcm91250a build-arch_mipsel_none_sb1a-bcm91480b build-arch_mipsel_none_4kc-malta: build-arch_mipsel_none_4kc-malta_real build-arch_mipsel_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mipsel_none_5kc-malta: build-arch_mipsel_none_5kc-malta_real build-arch_mipsel_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mipsel_none_loongson-2f: build-arch_mipsel_none_loongson-2f_real build-arch_mipsel_none_loongson-2f_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='loongson-2f' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.loongson-2f' KERNEL_ARCH='mips' LOCALVERSION='-loongson-2f' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-2f' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='loongson-2f' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.loongson-2f' KERNEL_ARCH='mips' LOCALVERSION='-loongson-2f' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-2f' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mipsel_none_r5k-cobalt: build-arch_mipsel_none_r5k-cobalt_real build-arch_mipsel_none_r5k-cobalt_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-cobalt' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.r5k-cobalt' KERNEL_ARCH='mips' LOCALVERSION='-r5k-cobalt' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-cobalt' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-cobalt' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.r5k-cobalt' KERNEL_ARCH='mips' LOCALVERSION='-r5k-cobalt' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-cobalt' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mipsel_none_real: build-arch_mipsel_none_sb1-bcm91250a: build-arch_mipsel_none_sb1-bcm91250a_real build-arch_mipsel_none_sb1-bcm91250a_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mipsel_none_sb1a-bcm91480b: build-arch_mipsel_none_sb1a-bcm91480b_real build-arch_mipsel_none_sb1a-bcm91480b_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_mipsel_real: build-arch_powerpc: build-arch_powerpc_none build-arch_powerpc_real build-arch_powerpc_none: build-arch_powerpc_none_powerpc build-arch_powerpc_none_powerpc-smp build-arch_powerpc_none_powerpc64 build-arch_powerpc_none_real build-arch_powerpc_none_powerpc: build-arch_powerpc_none_powerpc_real build-arch_powerpc_none_powerpc-smp: build-arch_powerpc_none_powerpc-smp_real build-arch_powerpc_none_powerpc-smp_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc-smp' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc-smp' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_powerpc_none_powerpc64: build-arch_powerpc_none_powerpc64_real build-arch_powerpc_none_powerpc64_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_powerpc_none_powerpc_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_powerpc_none_real: build-arch_powerpc_real: build-arch_ppc64: build-arch_ppc64_none build-arch_ppc64_real build-arch_ppc64_none: build-arch_ppc64_none_powerpc64 build-arch_ppc64_none_real build-arch_ppc64_none_powerpc64: build-arch_ppc64_none_powerpc64_real build-arch_ppc64_none_powerpc64_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_ppc64_none_real: build-arch_ppc64_real: build-arch_s390: build-arch_s390_none build-arch_s390_real @@ -567,9 +555,9 @@ build-arch_s390_none_s390x: build-arch_s390_none_s390x_real build-arch_s390_none_s390x-tape: build-arch_s390_none_s390x-tape_real build-arch_s390_none_s390x-tape_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_s390_none_s390x_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_s390_real: build-arch_s390x: build-arch_s390x_none build-arch_s390x_real build-arch_s390x_none: build-arch_s390x_none_real build-arch_s390x_none_s390x build-arch_s390x_none_s390x-tape @@ -577,19 +565,19 @@ build-arch_s390x_none_s390x: build-arch_s390x_none_s390x_real build-arch_s390x_none_s390x-tape: build-arch_s390x_none_s390x-tape_real build-arch_s390x_none_s390x-tape_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_s390x_none_s390x_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_s390x_real: build-arch_sh4: build-arch_sh4_none build-arch_sh4_real build-arch_sh4_none: build-arch_sh4_none_real build-arch_sh4_none_sh7751r build-arch_sh4_none_sh7785lcr build-arch_sh4_none_real: build-arch_sh4_none_sh7751r: build-arch_sh4_none_sh7751r_real build-arch_sh4_none_sh7751r_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_sh4_none_sh7785lcr: build-arch_sh4_none_sh7785lcr_real build-arch_sh4_none_sh7785lcr_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_sh4_real: build-arch_sparc: build-arch_sparc_none build-arch_sparc_real build-arch_sparc64: build-arch_sparc64_none build-arch_sparc64_real @@ -598,213 +586,207 @@ build-arch_sparc64_none_sparc64: build-arch_sparc64_none_sparc64_real build-arch_sparc64_none_sparc64-smp: build-arch_sparc64_none_sparc64-smp_real build-arch_sparc64_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_sparc64_none_sparc64_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_sparc64_real: build-arch_sparc_none: build-arch_sparc_none_real build-arch_sparc_none_sparc64 build-arch_sparc_none_sparc64-smp build-arch_sparc_none_real: build-arch_sparc_none_sparc64: build-arch_sparc_none_sparc64_real build-arch_sparc_none_sparc64-smp: build-arch_sparc_none_sparc64-smp_real build-arch_sparc_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_sparc_none_sparc64_real:: - $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-arch ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' build-arch_sparc_real: build-indep:: - $(MAKE) -f debian/rules.real build-indep ABINAME='3.2.0-3' ABINAME_PART='-3' ALL_FEATURESETS='none rt' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real build-indep ABINAME='3.2.0-3' ABINAME_PART='-3' ALL_FEATURESETS='none rt' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' setup: setup_alpha setup_amd64 setup_armel setup_armhf setup_hppa setup_i386 setup_ia64 setup_m68k setup_mips setup_mipsel setup_powerpc setup_ppc64 setup_s390 setup_s390x setup_sh4 setup_sparc setup_sparc64 setup_alpha: setup_alpha_none setup_alpha_real setup_alpha_none: setup_alpha_none_alpha-generic setup_alpha_none_alpha-legacy setup_alpha_none_alpha-smp setup_alpha_none_real setup_alpha_none_alpha-generic: setup_alpha_none_alpha-generic_real setup_alpha_none_alpha-generic_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_alpha_none_alpha-legacy: setup_alpha_none_alpha-legacy_real setup_alpha_none_alpha-legacy_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-legacy' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-legacy' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-legacy' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-legacy' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-legacy' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-legacy' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-legacy' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-legacy' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_alpha_none_alpha-smp: setup_alpha_none_alpha-smp_real setup_alpha_none_alpha-smp_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='alpha' COMPILER='gcc-4.5' FEATURESET='none' FLAVOUR='alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_alpha_none_real: setup_alpha_real: setup_amd64: setup_amd64_none setup_amd64_real setup_amd64_rt setup_amd64_none: setup_amd64_none_amd64 setup_amd64_none_real setup_amd64_none_amd64: setup_amd64_none_amd64_real setup_amd64_none_amd64_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_amd64_none_real: setup_amd64_real: setup_amd64_rt: setup_amd64_rt_amd64 setup_amd64_rt_real setup_amd64_rt_amd64: setup_amd64_rt_amd64_real setup_amd64_rt_amd64_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64 debian/config/featureset-rt/config' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='amd64' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64 debian/config/featureset-rt/config' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_amd64_rt_real: setup_armel: setup_armel_none setup_armel_real setup_armel_none: setup_armel_none_iop32x setup_armel_none_ixp4xx setup_armel_none_kirkwood setup_armel_none_mv78xx0 setup_armel_none_orion5x setup_armel_none_real setup_armel_none_versatile setup_armel_none_iop32x: setup_armel_none_iop32x_real setup_armel_none_iop32x_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='iop32x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.iop32x' KERNEL_ARCH='arm' LOCALVERSION='-iop32x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-iop32x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='iop32x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.iop32x' KERNEL_ARCH='arm' LOCALVERSION='-iop32x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-iop32x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_armel_none_ixp4xx: setup_armel_none_ixp4xx_real setup_armel_none_ixp4xx_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='ixp4xx' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.ixp4xx' KERNEL_ARCH='arm' LOCALVERSION='-ixp4xx' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-ixp4xx' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='ixp4xx' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.ixp4xx' KERNEL_ARCH='arm' LOCALVERSION='-ixp4xx' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-ixp4xx' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_armel_none_kirkwood: setup_armel_none_kirkwood_real setup_armel_none_kirkwood_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='kirkwood' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.kirkwood' KERNEL_ARCH='arm' LOCALVERSION='-kirkwood' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-kirkwood' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='kirkwood' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.kirkwood' KERNEL_ARCH='arm' LOCALVERSION='-kirkwood' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-kirkwood' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_armel_none_mv78xx0: setup_armel_none_mv78xx0_real setup_armel_none_mv78xx0_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mv78xx0' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.mv78xx0' KERNEL_ARCH='arm' LOCALVERSION='-mv78xx0' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mv78xx0' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mv78xx0' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.mv78xx0' KERNEL_ARCH='arm' LOCALVERSION='-mv78xx0' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mv78xx0' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_armel_none_orion5x: setup_armel_none_orion5x_real setup_armel_none_orion5x_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='orion5x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.orion5x' KERNEL_ARCH='arm' LOCALVERSION='-orion5x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-orion5x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='orion5x' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.orion5x' KERNEL_ARCH='arm' LOCALVERSION='-orion5x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-orion5x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_armel_none_real: setup_armel_none_versatile: setup_armel_none_versatile_real setup_armel_none_versatile_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='versatile' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.versatile' KERNEL_ARCH='arm' LOCALVERSION='-versatile' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-versatile' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='versatile' KCONFIG='debian/config/config debian/config/armel/config debian/config/armel/config.versatile' KERNEL_ARCH='arm' LOCALVERSION='-versatile' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-versatile' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_armel_real: setup_armhf: setup_armhf_none setup_armhf_real -setup_armhf_none: setup_armhf_none_mx5 setup_armhf_none_omap setup_armhf_none_real setup_armhf_none_vexpress -setup_armhf_none_mx5: setup_armhf_none_mx5_real -setup_armhf_none_mx5_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mx5' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.mx5' KERNEL_ARCH='arm' LOCALVERSION='-mx5' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mx5' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' -setup_armhf_none_omap: setup_armhf_none_omap_real -setup_armhf_none_omap_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='omap' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.omap' KERNEL_ARCH='arm' LOCALVERSION='-omap' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-omap' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' +setup_armhf_none: setup_armhf_none_real setup_armhf_none_rpi setup_armhf_none_real: -setup_armhf_none_vexpress: setup_armhf_none_vexpress_real -setup_armhf_none_vexpress_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='vexpress' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.vexpress' KERNEL_ARCH='arm' LOCALVERSION='-vexpress' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-vexpress' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' +setup_armhf_none_rpi: setup_armhf_none_rpi_real +setup_armhf_none_rpi_real:: + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='armhf' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='rpi' INITRAMFS='False' KCONFIG='debian/config/config debian/config/armel/config debian/config/armhf/config debian/config/armhf/config.rpi' KERNEL_ARCH='arm' LOCALVERSION='-rpi' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_armhf_real: setup_hppa: setup_hppa_none setup_hppa_real setup_hppa_none: setup_hppa_none_parisc setup_hppa_none_parisc-smp setup_hppa_none_parisc64 setup_hppa_none_parisc64-smp setup_hppa_none_real setup_hppa_none_parisc: setup_hppa_none_parisc_real setup_hppa_none_parisc-smp: setup_hppa_none_parisc-smp_real setup_hppa_none_parisc-smp_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_hppa_none_parisc64: setup_hppa_none_parisc64_real setup_hppa_none_parisc64-smp: setup_hppa_none_parisc64-smp_real setup_hppa_none_parisc64-smp_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_hppa_none_parisc64_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc64' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64' MODULES='True' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_hppa_none_parisc_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='hppa' COMPILER='gcc-4.4' FEATURESET='none' FLAVOUR='parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_hppa_none_real: setup_hppa_real: setup_i386: setup_i386_none setup_i386_real setup_i386_rt setup_i386_none: setup_i386_none_486 setup_i386_none_686-pae setup_i386_none_amd64 setup_i386_none_real setup_i386_none_486: setup_i386_none_486_real setup_i386_none_486_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='486' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.486' KERNEL_ARCH='x86' LOCALVERSION='-486' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-486' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='486' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.486' KERNEL_ARCH='x86' LOCALVERSION='-486' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-486' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_i386_none_686-pae: setup_i386_none_686-pae_real setup_i386_none_686-pae_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/i386/none/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_i386_none_amd64: setup_i386_none_amd64_real setup_i386_none_amd64_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-64' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_i386_none_real: setup_i386_real: setup_i386_rt: setup_i386_rt_686-pae setup_i386_rt_real setup_i386_rt_686-pae: setup_i386_rt_686-pae_real setup_i386_rt_686-pae_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/featureset-rt/config debian/config/i386/rt/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='i386' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/kernelarch-x86/config-arch-32 debian/config/featureset-rt/config debian/config/i386/rt/config.686-pae' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_i386_rt_real: setup_ia64: setup_ia64_none setup_ia64_real setup_ia64_none: setup_ia64_none_itanium setup_ia64_none_mckinley setup_ia64_none_real setup_ia64_none_itanium: setup_ia64_none_itanium_real setup_ia64_none_itanium_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='itanium' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.itanium' KERNEL_ARCH='ia64' LOCALVERSION='-itanium' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-itanium' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='itanium' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.itanium' KERNEL_ARCH='ia64' LOCALVERSION='-itanium' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-itanium' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_ia64_none_mckinley: setup_ia64_none_mckinley_real setup_ia64_none_mckinley_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mckinley' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.mckinley' KERNEL_ARCH='ia64' LOCALVERSION='-mckinley' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mckinley' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ia64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mckinley' KCONFIG='debian/config/config debian/config/ia64/config debian/config/ia64/config.mckinley' KERNEL_ARCH='ia64' LOCALVERSION='-mckinley' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mckinley' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_ia64_none_real: setup_ia64_real: setup_m68k: setup_m68k_none setup_m68k_real setup_m68k_none: setup_m68k_none_amiga setup_m68k_none_atari setup_m68k_none_bvme6000 setup_m68k_none_mac setup_m68k_none_mvme147 setup_m68k_none_mvme16x setup_m68k_none_real setup_m68k_none_amiga: setup_m68k_none_amiga_real setup_m68k_none_amiga_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amiga' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.amiga' KERNEL_ARCH='m68k' LOCALVERSION='-amiga' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amiga' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='amiga' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.amiga' KERNEL_ARCH='m68k' LOCALVERSION='-amiga' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amiga' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_m68k_none_atari: setup_m68k_none_atari_real setup_m68k_none_atari_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='atari' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.atari' KERNEL_ARCH='m68k' LOCALVERSION='-atari' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-atari' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='atari' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.atari' KERNEL_ARCH='m68k' LOCALVERSION='-atari' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-atari' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_m68k_none_bvme6000: setup_m68k_none_bvme6000_real setup_m68k_none_bvme6000_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='bvme6000' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.bvme6000' KERNEL_ARCH='m68k' LOCALVERSION='-bvme6000' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-bvme6000' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='bvme6000' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.bvme6000' KERNEL_ARCH='m68k' LOCALVERSION='-bvme6000' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-bvme6000' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_m68k_none_mac: setup_m68k_none_mac_real setup_m68k_none_mac_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mac' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mac' KERNEL_ARCH='m68k' LOCALVERSION='-mac' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mac' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mac' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mac' KERNEL_ARCH='m68k' LOCALVERSION='-mac' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mac' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_m68k_none_mvme147: setup_m68k_none_mvme147_real setup_m68k_none_mvme147_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme147' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme147' KERNEL_ARCH='m68k' LOCALVERSION='-mvme147' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme147' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme147' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme147' KERNEL_ARCH='m68k' LOCALVERSION='-mvme147' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme147' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_m68k_none_mvme16x: setup_m68k_none_mvme16x_real setup_m68k_none_mvme16x_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme16x' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme16x' KERNEL_ARCH='m68k' LOCALVERSION='-mvme16x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme16x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='mvme16x' INITRAMFS='False' KCONFIG='debian/config/config debian/config/m68k/config debian/config/m68k/config.mvme16x' KERNEL_ARCH='m68k' LOCALVERSION='-mvme16x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-mvme16x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_m68k_none_real: setup_m68k_real: setup_mips: setup_mips_none setup_mips_real setup_mips_none: setup_mips_none_4kc-malta setup_mips_none_5kc-malta setup_mips_none_octeon setup_mips_none_r4k-ip22 setup_mips_none_r5k-ip32 setup_mips_none_real setup_mips_none_sb1-bcm91250a setup_mips_none_sb1a-bcm91480b setup_mips_none_4kc-malta: setup_mips_none_4kc-malta_real setup_mips_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mips_none_5kc-malta: setup_mips_none_5kc-malta_real setup_mips_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mips_none_octeon: setup_mips_none_octeon_real setup_mips_none_octeon_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='octeon' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.octeon' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='octeon' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.octeon' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mips_none_r4k-ip22: setup_mips_none_r4k-ip22_real setup_mips_none_r4k-ip22_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r4k-ip22' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r4k-ip22' KERNEL_ARCH='mips' LOCALVERSION='-r4k-ip22' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r4k-ip22' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r4k-ip22' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r4k-ip22' KERNEL_ARCH='mips' LOCALVERSION='-r4k-ip22' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r4k-ip22' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mips_none_r5k-ip32: setup_mips_none_r5k-ip32_real setup_mips_none_r5k-ip32_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-ip32' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r5k-ip32' KERNEL_ARCH='mips' LOCALVERSION='-r5k-ip32' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-ip32' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-ip32' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.r5k-ip32' KERNEL_ARCH='mips' LOCALVERSION='-r5k-ip32' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-ip32' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mips_none_real: setup_mips_none_sb1-bcm91250a: setup_mips_none_sb1-bcm91250a_real setup_mips_none_sb1-bcm91250a_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mips_none_sb1a-bcm91480b: setup_mips_none_sb1a-bcm91480b_real setup_mips_none_sb1a-bcm91480b_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mips' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mips_real: setup_mipsel: setup_mipsel_none setup_mipsel_real setup_mipsel_none: setup_mipsel_none_4kc-malta setup_mipsel_none_5kc-malta setup_mipsel_none_loongson-2f setup_mipsel_none_r5k-cobalt setup_mipsel_none_real setup_mipsel_none_sb1-bcm91250a setup_mipsel_none_sb1a-bcm91480b setup_mipsel_none_4kc-malta: setup_mipsel_none_4kc-malta_real setup_mipsel_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='4kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.4kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mipsel_none_5kc-malta: setup_mipsel_none_5kc-malta_real setup_mipsel_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='5kc-malta' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.5kc-malta' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mipsel_none_loongson-2f: setup_mipsel_none_loongson-2f_real setup_mipsel_none_loongson-2f_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='loongson-2f' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.loongson-2f' KERNEL_ARCH='mips' LOCALVERSION='-loongson-2f' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-2f' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='loongson-2f' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.loongson-2f' KERNEL_ARCH='mips' LOCALVERSION='-loongson-2f' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-2f' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mipsel_none_r5k-cobalt: setup_mipsel_none_r5k-cobalt_real setup_mipsel_none_r5k-cobalt_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-cobalt' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.r5k-cobalt' KERNEL_ARCH='mips' LOCALVERSION='-r5k-cobalt' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-cobalt' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='r5k-cobalt' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mipsel/config.r5k-cobalt' KERNEL_ARCH='mips' LOCALVERSION='-r5k-cobalt' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-r5k-cobalt' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mipsel_none_real: setup_mipsel_none_sb1-bcm91250a: setup_mipsel_none_sb1-bcm91250a_real setup_mipsel_none_sb1-bcm91250a_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1-bcm91250a' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1-bcm91250a' KERNEL_ARCH='mips' LOCALVERSION='-sb1-bcm91250a' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1-bcm91250a' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mipsel_none_sb1a-bcm91480b: setup_mipsel_none_sb1a-bcm91480b_real setup_mipsel_none_sb1a-bcm91480b_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='mipsel' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sb1a-bcm91480b' INITRAMFS='False' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/mips/config.sb1a-bcm91480b' KERNEL_ARCH='mips' LOCALVERSION='-sb1a-bcm91480b' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sb1a-bcm91480b' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_mipsel_real: setup_powerpc: setup_powerpc_none setup_powerpc_real setup_powerpc_none: setup_powerpc_none_powerpc setup_powerpc_none_powerpc-smp setup_powerpc_none_powerpc64 setup_powerpc_none_real setup_powerpc_none_powerpc: setup_powerpc_none_powerpc_real setup_powerpc_none_powerpc-smp: setup_powerpc_none_powerpc-smp_real setup_powerpc_none_powerpc-smp_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc-smp' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc-smp' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_powerpc_none_powerpc64: setup_powerpc_none_powerpc64_real setup_powerpc_none_powerpc64_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_powerpc_none_powerpc_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='powerpc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_powerpc_none_real: setup_powerpc_real: setup_ppc64: setup_ppc64_none setup_ppc64_real setup_ppc64_none: setup_ppc64_none_powerpc64 setup_ppc64_none_real setup_ppc64_none_powerpc64: setup_ppc64_none_powerpc64_real setup_ppc64_none_powerpc64_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='ppc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='powerpc64' KCONFIG='debian/config/config debian/config/powerpc/config debian/config/powerpc/config.powerpc64' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_ppc64_none_real: setup_ppc64_real: setup_s390: setup_s390_none setup_s390_real @@ -813,9 +795,9 @@ setup_s390_none_s390x: setup_s390_none_s390x_real setup_s390_none_s390x-tape: setup_s390_none_s390x-tape_real setup_s390_none_s390x-tape_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' setup_s390_none_s390x_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_s390_real: setup_s390x: setup_s390x_none setup_s390x_real setup_s390x_none: setup_s390x_none_real setup_s390x_none_s390x setup_s390x_none_s390x-tape @@ -823,19 +805,19 @@ setup_s390x_none_s390x: setup_s390x_none_s390x_real setup_s390x_none_s390x-tape: setup_s390x_none_s390x-tape_real setup_s390x_none_s390x-tape_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='s390x-tape' INITRAMFS='False' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x-tape' KERNEL_ARCH='s390' LOCALVERSION='-s390x-tape' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain-s390-tape' UPSTREAMVERSION='3.2' VERSION='3.2' setup_s390x_none_s390x_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='s390x' COMPILER='gcc-4.6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' KCONFIG='debian/config/config debian/config/s390/config debian/config/s390/config.s390x' KCONFIG_OPTIONS='-o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_s390x_real: setup_sh4: setup_sh4_none setup_sh4_real setup_sh4_none: setup_sh4_none_real setup_sh4_none_sh7751r setup_sh4_none_sh7785lcr setup_sh4_none_real: setup_sh4_none_sh7751r: setup_sh4_none_sh7751r_real setup_sh4_none_sh7751r_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_sh4_none_sh7785lcr: setup_sh4_none_sh7785lcr_real setup_sh4_none_sh7785lcr_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sh4' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_sh4_real: setup_sparc: setup_sparc_none setup_sparc_real setup_sparc64: setup_sparc64_none setup_sparc64_real @@ -844,23 +826,23 @@ setup_sparc64_none_sparc64: setup_sparc64_none_sparc64_real setup_sparc64_none_sparc64-smp: setup_sparc64_none_sparc64-smp_real setup_sparc64_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_sparc64_none_sparc64_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc64' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_sparc64_real: setup_sparc_none: setup_sparc_none_real setup_sparc_none_sparc64 setup_sparc_none_sparc64-smp setup_sparc_none_real: setup_sparc_none_sparc64: setup_sparc_none_sparc64_real setup_sparc_none_sparc64-smp: setup_sparc_none_sparc64-smp_real setup_sparc_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64-smp' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64-smp' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_sparc_none_sparc64_real:: - $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real setup-flavour ABINAME='3.2.0-3' ABINAME_PART='-3' ARCH='sparc' COMPILER='gcc-4.6' FEATURESET='none' FLAVOUR='sparc64' KCONFIG='debian/config/config debian/config/sparc/config debian/config/sparc/config.sparc64' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' MODULES='True' SOURCEVERSION='3.2.21-1+rpi1' TYPE='plain' UPSTREAMVERSION='3.2' VERSION='3.2' setup_sparc_real: source: source_none source_rt source_none: source_none_real source_none_real:: - $(MAKE) -f debian/rules.real source-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' FEATURESET='none' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real source-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' FEATURESET='none' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' source_rt: source_rt_real source_rt_real:: - $(MAKE) -f debian/rules.real source-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' FEATURESET='rt' SOURCEVERSION='3.2.21-1' UPSTREAMVERSION='3.2' VERSION='3.2' + $(MAKE) -f debian/rules.real source-featureset ABINAME='3.2.0-3' ABINAME_PART='-3' FEATURESET='rt' SOURCEVERSION='3.2.21-1+rpi1' UPSTREAMVERSION='3.2' VERSION='3.2' diff -Nru linux-3.2.21/debian/templates/temp.image.plain/postinst linux-3.2.21/debian/templates/temp.image.plain/postinst --- linux-3.2.21/debian/templates/temp.image.plain/postinst 2012-06-03 16:54:25.000000000 +0100 +++ linux-3.2.21/debian/templates/temp.image.plain/postinst 2012-06-23 23:11:02.000000000 +0100 @@ -37,6 +37,10 @@ # Ignore all invocations except when called on to configure. exit 0 unless $ARGV[0] =~ /configure/; +system("dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version"); +system("dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version"); +system("dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version"); + my $DEBUG = 0; # Do some preliminary sanity checks here to ensure we actually have an diff -Nru linux-3.2.21/debian/templates/temp.image.plain/preinst linux-3.2.21/debian/templates/temp.image.plain/preinst --- linux-3.2.21/debian/templates/temp.image.plain/preinst 2012-06-03 16:54:25.000000000 +0100 +++ linux-3.2.21/debian/templates/temp.image.plain/preinst 2012-06-23 23:11:02.000000000 +0100 @@ -119,6 +119,13 @@ die "Failed to process /etc/kernel/preinst.d/$version"; } +# Rpi diversion hack +system("mkdir -p /usr/share/rpikernelhack"); +system("dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version"); +system("dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version"); +system("dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version"); + + exit 0; __END__